diff options
Diffstat (limited to 'target/linux/adm5120/patches-3.3')
10 files changed, 0 insertions, 1607 deletions
diff --git a/target/linux/adm5120/patches-3.3/a00-adm5120-add-Platform-file.patch b/target/linux/adm5120/patches-3.3/a00-adm5120-add-Platform-file.patch deleted file mode 100644 index ddfbff4748..0000000000 --- a/target/linux/adm5120/patches-3.3/a00-adm5120-add-Platform-file.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- /dev/null -+++ b/arch/mips/adm5120/Platform -@@ -0,0 +1,19 @@ -+# -+# Infineon/ADMtek ADM5120 -+# -+ -+platform-$(CONFIG_ADM5120) += adm5120/common/ -+ -+platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/ -+platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/ -+platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/ -+platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/ -+platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/ -+platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/ -+platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/ -+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/ -+platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/ -+ -+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120 -+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/ -+load-$(CONFIG_ADM5120) += 0xffffffff80001000 diff --git a/target/linux/adm5120/patches-3.3/a01-adm5120-core-build-error-fixes.patch b/target/linux/adm5120/patches-3.3/a01-adm5120-core-build-error-fixes.patch deleted file mode 100644 index bf0022da77..0000000000 --- a/target/linux/adm5120/patches-3.3/a01-adm5120-core-build-error-fixes.patch +++ /dev/null @@ -1,110 +0,0 @@ ---- a/arch/mips/adm5120/common/platform.c -+++ b/arch/mips/adm5120/common/platform.c -@@ -18,6 +18,7 @@ - #include <linux/gpio.h> - #include <linux/irq.h> - #include <linux/slab.h> -+#include <linux/export.h> - - #include <asm/bootinfo.h> - ---- a/arch/mips/adm5120/common/clock.c -+++ b/arch/mips/adm5120/common/clock.c -@@ -33,7 +33,7 @@ static struct clk uart_clk = { - - struct clk *clk_get(struct device *dev, const char *id) - { -- char *name = dev_name(dev); -+ const char *name = dev_name(dev); - - if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1")) - return &uart_clk; ---- a/arch/mips/pci/pci-adm5120.c -+++ b/arch/mips/pci/pci-adm5120.c -@@ -49,7 +49,7 @@ - static unsigned int adm5120_pci_nr_irqs __initdata; - static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata; - --static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED; -+static DEFINE_SPINLOCK(pci_lock); - - /* -------------------------------------------------------------------------*/ - ---- a/arch/mips/adm5120/common/irq.c -+++ b/arch/mips/adm5120/common/irq.c -@@ -23,9 +23,9 @@ - - #include <asm/mach-adm5120/adm5120_defs.h> - --static void adm5120_intc_irq_unmask(unsigned int irq); --static void adm5120_intc_irq_mask(unsigned int irq); --static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type); -+static void adm5120_intc_irq_unmask(struct irq_data *d); -+static void adm5120_intc_irq_mask(struct irq_data *d); -+static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type); - - static inline void intc_write_reg(unsigned int reg, u32 val) - { -@@ -43,10 +43,10 @@ static inline u32 intc_read_reg(unsigned - - static struct irq_chip adm5120_intc_irq_chip = { - .name = "INTC", -- .unmask = adm5120_intc_irq_unmask, -- .mask = adm5120_intc_irq_mask, -- .mask_ack = adm5120_intc_irq_mask, -- .set_type = adm5120_intc_irq_set_type -+ .irq_unmask = adm5120_intc_irq_unmask, -+ .irq_mask = adm5120_intc_irq_mask, -+ .irq_mask_ack = adm5120_intc_irq_mask, -+ .irq_set_type = adm5120_intc_irq_set_type - }; - - static struct irqaction adm5120_intc_irq_action = { -@@ -54,20 +54,19 @@ static struct irqaction adm5120_intc_irq - .name = "cascade [INTC]" - }; - --static void adm5120_intc_irq_unmask(unsigned int irq) -+static void adm5120_intc_irq_unmask(struct irq_data *d) - { -- irq -= ADM5120_INTC_IRQ_BASE; -- intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << irq); -+ intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE)); - } - --static void adm5120_intc_irq_mask(unsigned int irq) -+static void adm5120_intc_irq_mask(struct irq_data *d) - { -- irq -= ADM5120_INTC_IRQ_BASE; -- intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << irq); -+ intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE)); - } - --static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type) -+static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type) - { -+ unsigned int irq = d->irq; - unsigned int sense; - unsigned long mode; - int err = 0; -@@ -105,10 +104,6 @@ static int adm5120_intc_irq_set_type(uns - mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE)); - - intc_write_reg(INTC_REG_INT_MODE, mode); -- /* fallthrough */ -- default: -- irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; -- irq_desc[irq].status |= sense; - break; - } - -@@ -162,8 +157,7 @@ static void __init adm5120_intc_irq_init - for (i = ADM5120_INTC_IRQ_BASE; - i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST; - i++) { -- irq_desc[i].status = INTC_IRQ_STATUS; -- set_irq_chip_and_handler(i, &adm5120_intc_irq_chip, -+ irq_set_chip_and_handler(i, &adm5120_intc_irq_chip, - handle_level_irq); - } - diff --git a/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch b/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch deleted file mode 100644 index 4ee4af6efd..0000000000 --- a/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch +++ /dev/null @@ -1,306 +0,0 @@ ---- a/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -+++ b/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -@@ -28,10 +28,8 @@ struct adm5120_flash_platform_data { - void (*set_vpp)(struct map_info *, int); - void (*switch_bank)(unsigned); - u32 window_size; --#ifdef CONFIG_MTD_PARTITIONS - unsigned int nr_parts; - struct mtd_partition *parts; --#endif - }; - - struct adm5120_switch_platform_data { ---- a/arch/mips/adm5120/infineon/infineon.c -+++ b/arch/mips/adm5120/infineon/infineon.c -@@ -16,7 +16,6 @@ - #define EASY_CONFIG_OFFSET 0x10000 - #define EASY_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", -@@ -33,7 +32,6 @@ static struct mtd_partition easy_partiti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static __init void easy_setup_mac(void) - { -@@ -68,10 +66,8 @@ void __init easy_setup_pqfp(void) - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); -@@ -100,10 +96,8 @@ void __init easy_setup_bga(void) - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); ---- a/arch/mips/adm5120/cellvision/cellvision.c -+++ b/arch/mips/adm5120/cellvision/cellvision.c -@@ -19,7 +19,6 @@ - #define CELLVISION_CONFIG_OFFSET 0x8000 - #define CELLVISION_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition cas6xx_partitions[] = { - { - .name = "admboot", -@@ -65,7 +64,6 @@ static struct mtd_partition cas7xx_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static void switch_bank_gpio5(unsigned bank) - { -@@ -105,20 +103,16 @@ void __init cellvision_mac_setup(void) - - void __init cas6xx_flash_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - cellvision_flash_setup(); - } - - void __init cas7xx_flash_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); - adm5120_flash0_data.parts = cas7xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - cellvision_flash_setup(); - } ---- a/arch/mips/adm5120/edimax/br-61xx.c -+++ b/arch/mips/adm5120/edimax/br-61xx.c -@@ -18,7 +18,6 @@ - #define BR61XX_CONFIG_OFFSET 0x8000 - #define BR61XX_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition br61xx_partitions[] = { - { - .name = "admboot", -@@ -35,7 +34,6 @@ static struct mtd_partition br61xx_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct gpio_button br61xx_gpio_buttons[] __initdata = { - { -@@ -68,10 +66,8 @@ static void __init br61xx_mac_setup(void - void __init br61xx_generic_setup(void) - { - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions); - adm5120_flash0_data.parts = br61xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK); ---- a/arch/mips/adm5120/mikrotik/rb-1xx.c -+++ b/arch/mips/adm5120/mikrotik/rb-1xx.c -@@ -25,7 +25,6 @@ static struct adm5120_pci_irq rb1xx_pci_ - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) - }; - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition rb1xx_nor_parts[] = { - { - .name = "booter", -@@ -50,7 +49,6 @@ static struct mtd_partition rb1xx_nand_p - .size = MTDPART_SIZ_FULL - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - /* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -@@ -79,10 +77,8 @@ static int rb1xx_nand_fixup(struct mtd_i - struct platform_nand_data rb1xx_nand_data __initdata = { - .chip = { - .nr_chips = 1, --#ifdef CONFIG_MTD_PARTITIONS - .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts), - .partitions = rb1xx_nand_parts, --#endif /* CONFIG_MTD_PARTITIONS */ - .chip_delay = RB1XX_NAND_CHIP_DELAY, - .options = NAND_NO_AUTOINCR, - .chip_fixup = rb1xx_nand_fixup, -@@ -114,10 +110,8 @@ static void __init rb1xx_mac_setup(void) - void __init rb1xx_add_device_flash(void) - { - /* setup data for flash0 device */ --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts); - adm5120_flash0_data.parts = rb1xx_nor_parts; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_flash0_data.window_size = 128*1024; - - adm5120_add_device_flash(0); ---- a/arch/mips/adm5120/compex/wp54.c -+++ b/arch/mips/adm5120/compex/wp54.c -@@ -11,7 +11,6 @@ - - #include "compex.h" - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", -@@ -28,7 +27,6 @@ static struct mtd_partition wp54g_wrt_pa - .size = 0x010000, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -@@ -83,10 +81,8 @@ MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", - - static void __init wp54_wrt_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); - adm5120_flash0_data.parts = wp54g_wrt_partitions; --#endif - - wp54_setup(); - } ---- a/arch/mips/adm5120/zyxel/p-33x.c -+++ b/arch/mips/adm5120/zyxel/p-33x.c -@@ -16,7 +16,6 @@ - #define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 - #define P33X_GPIO_DEV_MASK (1 << P33X_GPIO_FLASH_A20) - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition p33x_partitions[] = { - { - .name = "bootbase", -@@ -46,7 +45,6 @@ static struct mtd_partition p33x_partiti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -@@ -75,10 +73,8 @@ void __init p33x_generic_setup(void) - gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */ - gpio_direction_output(P33X_GPIO_FLASH_A20, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); - adm5120_flash0_data.parts = p33x_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_uart(0); ---- a/arch/mips/adm5120/generic/eb-214a.c -+++ b/arch/mips/adm5120/generic/eb-214a.c -@@ -28,7 +28,6 @@ - #define EB214A_GPIO_DEV_MASK 0 - #define EB214A_CONFIG_OFFSET 0x4000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition eb214a_partitions[] = { - { - .name = "bootloader", -@@ -45,7 +44,6 @@ static struct mtd_partition eb214a_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = { - PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0), -@@ -94,10 +92,8 @@ static void __init eb214a_mac_setup(void - - static void __init eb214a_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions); - adm5120_flash0_data.parts = eb214a_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_gpio(EB214A_GPIO_DEV_MASK); ---- a/arch/mips/adm5120/motorola/pmugw.c -+++ b/arch/mips/adm5120/motorola/pmugw.c -@@ -26,7 +26,6 @@ - #define PMUGW_CONFIG_OFFSET 0x10000 - #define PMUGW_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition pmugw_partitions[] = { - { - .name = "admboot", -@@ -43,7 +42,6 @@ static struct mtd_partition pmugw_partit - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static u8 pmugw_vlans[6] __initdata = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -@@ -82,10 +80,8 @@ void __init pmugw_setup(void) - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions); - adm5120_flash0_data.parts = pmugw_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(1); /* ttyS0 */ - adm5120_add_device_uart(0); /* ttyS1 */ ---- a/arch/mips/adm5120/osbridge/5gxi.c -+++ b/arch/mips/adm5120/osbridge/5gxi.c -@@ -20,7 +20,6 @@ - #include <asm/mach-adm5120/adm5120_platform.h> - #include <asm/mach-adm5120/adm5120_info.h> - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition osbridge_5gxi_partitions[] = { - { - .name = "bootloader", -@@ -37,7 +36,6 @@ static struct mtd_partition osbridge_5gx - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = { - GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL), -@@ -54,10 +52,8 @@ static u8 osbridge_5gxi_vlans[6] __initd - - static void __init osbridge_5gxi_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions); - adm5120_flash0_data.parts = osbridge_5gxi_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); diff --git a/target/linux/adm5120/patches-3.3/a04-use-gpio-keys-polled-driver.patch b/target/linux/adm5120/patches-3.3/a04-use-gpio-keys-polled-driver.patch deleted file mode 100644 index ce9d7faeb9..0000000000 --- a/target/linux/adm5120/patches-3.3/a04-use-gpio-keys-polled-driver.patch +++ /dev/null @@ -1,263 +0,0 @@ ---- a/arch/mips/adm5120/common/platform.c -+++ b/arch/mips/adm5120/common/platform.c -@@ -245,31 +245,44 @@ void __init adm5120_add_device_uart(unsi - /* - * GPIO buttons - */ --#define ADM5120_BUTTON_INTERVAL 20 --struct gpio_buttons_platform_data adm5120_gpio_buttons_data = { -- .poll_interval = ADM5120_BUTTON_INTERVAL, --}; -- --struct platform_device adm5120_gpio_buttons_device = { -- .name = "gpio-buttons", -- .id = -1, -- .dev.platform_data = &adm5120_gpio_buttons_data, --}; -- --void __init adm5120_add_device_gpio_buttons(unsigned nbuttons, -- struct gpio_button *buttons) -+void __init adm5120_register_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_keys_button *buttons) - { -- struct gpio_button *p; -+ struct platform_device *pdev; -+ struct gpio_keys_platform_data pdata; -+ struct gpio_keys_button *p; -+ int err; - -- p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); -+ p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL); - if (!p) - return; - -- memcpy(p, buttons, nbuttons * sizeof(*p)); -- adm5120_gpio_buttons_data.nbuttons = nbuttons; -- adm5120_gpio_buttons_data.buttons = p; -+ pdev = platform_device_alloc("gpio-keys-polled", id); -+ if (!pdev) -+ goto err_free_buttons; -+ -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.poll_interval = poll_interval; -+ pdata.nbuttons = nbuttons; -+ pdata.buttons = p; -+ -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; -+ -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; -+ -+ return; -+ -+err_put_pdev: -+ platform_device_put(pdev); - -- platform_device_register(&adm5120_gpio_buttons_device); -+err_free_buttons: -+ kfree(p); - } - - /* ---- a/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -+++ b/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -@@ -20,7 +20,8 @@ - #include <linux/mtd/map.h> - #include <linux/mtd/partitions.h> - #include <linux/mtd/nand.h> --#include <linux/gpio_buttons.h> -+#include <linux/input.h> -+#include <linux/gpio_keys.h> - #include <linux/amba/bus.h> - #include <linux/amba/serial.h> - -@@ -66,8 +67,10 @@ extern void adm5120_add_device_uart(unsi - extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init; - extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init; - extern void adm5120_add_device_gpio(u32 disable_mask) __init; --extern void adm5120_add_device_gpio_buttons(unsigned nbuttons, -- struct gpio_button *buttons) __init; -+extern void adm5120_register_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_keys_button *buttons); - - #define GPIO_LED_DEF(g, n, t, a) { \ - .name = (n), \ ---- a/arch/mips/adm5120/compex/wp54.c -+++ b/arch/mips/adm5120/compex/wp54.c -@@ -11,6 +11,9 @@ - - #include "compex.h" - -+#define WP54_KEYS_POLL_INTERVAL 20 -+#define WP54_KEYS_DEBOUNCE_INTERVAL (3 * WP54_KEYS_POLL_INTERVAL) -+ - static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", -@@ -32,12 +35,12 @@ static struct adm5120_pci_irq wp54_pci_i - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - }; - --static struct gpio_button wp54_gpio_buttons[] __initdata = { -+static struct gpio_keys_button wp54_gpio_buttons[] __initdata = { - { - .desc = "reset_button", - .type = EV_KEY, -- .code = BTN_0, -- .threshold = 5, -+ .code = KEY_RESTART, -+ .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL, - .gpio = ADM5120_GPIO_PIN4, - } - }; -@@ -69,8 +72,9 @@ static void __init wp54_setup(void) - adm5120_board_reset = wp54_reset; - - adm5120_add_device_switch(2, wp54_vlans); -- adm5120_add_device_gpio_buttons(ARRAY_SIZE(wp54_gpio_buttons), -- wp54_gpio_buttons); -+ adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(wp54_gpio_buttons), -+ wp54_gpio_buttons); - adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds), - wp54_gpio_leds); - ---- a/arch/mips/adm5120/mikrotik/rb-1xx.c -+++ b/arch/mips/adm5120/mikrotik/rb-1xx.c -@@ -19,6 +19,9 @@ - - #define RB1XX_NAND_CHIP_DELAY 25 - -+#define RB1XX_KEYS_POLL_INTERVAL 20 -+#define RB1XX_KEYS_DEBOUNCE_INTERVAL (3 * RB1XX_KEYS_POLL_INTERVAL) -+ - static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { - PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), -@@ -85,12 +88,12 @@ struct platform_nand_data rb1xx_nand_dat - }, - }; - --struct gpio_button rb1xx_gpio_buttons[] __initdata = { -+struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = { - { - .desc = "reset_button", - .type = EV_KEY, -- .code = BTN_0, -- .threshold = 5, -+ .code = KEY_RESTART, -+ .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ADM5120_GPIO_PIN7, - } - }; -@@ -138,8 +141,9 @@ void __init rb1xx_generic_setup(void) - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); - -- adm5120_add_device_gpio_buttons(ARRAY_SIZE(rb1xx_gpio_buttons), -- rb1xx_gpio_buttons); -+ adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(rb1xx_gpio_buttons), -+ rb1xx_gpio_buttons); - - rb1xx_add_device_flash(); - rb1xx_mac_setup(); ---- a/arch/mips/adm5120/generic/eb-214a.c -+++ b/arch/mips/adm5120/generic/eb-214a.c -@@ -28,6 +28,9 @@ - #define EB214A_GPIO_DEV_MASK 0 - #define EB214A_CONFIG_OFFSET 0x4000 - -+#define EB214A_KEYS_POLL_INTERVAL 20 -+#define EB214A_KEYS_DEBOUNCE_INTERVAL (3 * EB214A_KEYS_POLL_INTERVAL) -+ - static struct mtd_partition eb214a_partitions[] = { - { - .name = "bootloader", -@@ -60,12 +63,12 @@ static struct gpio_led eb214a_gpio_leds[ - GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4", NULL), - }; - --static struct gpio_button eb214a_gpio_buttons[] __initdata = { -+static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, -- .code = BTN_0, -- .threshold = 5, -+ .code = KEY_RESTART, -+ .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL, - .gpio = ADM5120_GPIO_PIN1, - } - }; -@@ -105,8 +108,9 @@ static void __init eb214a_setup(void) - - eb214a_mac_setup(); - -- adm5120_add_device_gpio_buttons(ARRAY_SIZE(eb214a_gpio_buttons), -- eb214a_gpio_buttons); -+ adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(eb214a_gpio_buttons), -+ eb214a_gpio_buttons); - - adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds), - eb214a_gpio_leds); ---- a/arch/mips/adm5120/edimax/br-61xx.c -+++ b/arch/mips/adm5120/edimax/br-61xx.c -@@ -18,6 +18,9 @@ - #define BR61XX_CONFIG_OFFSET 0x8000 - #define BR61XX_CONFIG_SIZE 0x1000 - -+#define BR61XX_KEYS_POLL_INTERVAL 20 -+#define BR61XX_KEYS_DEBOUNCE_INTERVAL (3 * BR61XX_KEYS_POLL_INTERVAL) -+ - static struct mtd_partition br61xx_partitions[] = { - { - .name = "admboot", -@@ -35,12 +38,12 @@ static struct mtd_partition br61xx_parti - } - }; - --static struct gpio_button br61xx_gpio_buttons[] __initdata = { -+static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = { - { - .desc = "reset_button", - .type = EV_KEY, -- .code = BTN_0, -- .threshold = 5, -+ .code = KEY_RESTART, -+ .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ADM5120_GPIO_PIN2, - } - }; -@@ -76,8 +79,10 @@ void __init br61xx_generic_setup(void) - adm5120_add_device_uart(1); - - adm5120_add_device_switch(5, br61xx_vlans); -- adm5120_add_device_gpio_buttons(ARRAY_SIZE(br61xx_gpio_buttons), -- br61xx_gpio_buttons); -+ -+ adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(br61xx_gpio_buttons), -+ br61xx_gpio_buttons); - - br61xx_mac_setup(); - } ---- a/arch/mips/adm5120/mikrotik/rb-1xx.h -+++ b/arch/mips/adm5120/mikrotik/rb-1xx.h -@@ -26,7 +26,7 @@ - #include <prom/routerboot.h> - - extern struct platform_nand_data rb1xx_nand_data __initdata; --extern struct gpio_button rb1xx_gpio_buttons[] __initdata; -+extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata; - - extern void rb1xx_add_device_flash(void) __init; - extern void rb1xx_add_device_nand(void) __init; diff --git a/target/linux/adm5120/patches-3.3/a10-pata-rb150-cf-3.3-fix.patch b/target/linux/adm5120/patches-3.3/a10-pata-rb150-cf-3.3-fix.patch deleted file mode 100644 index fc3257a73c..0000000000 --- a/target/linux/adm5120/patches-3.3/a10-pata-rb150-cf-3.3-fix.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/drivers/ata/pata_rb153_cf.c -+++ b/drivers/ata/pata_rb153_cf.c -@@ -56,7 +56,7 @@ static inline void rb153_pata_finish_io( - ata_sff_dma_pause(ap); - ndelay(RB153_CF_IO_DELAY); - -- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); -+ irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); - } - - static void rb153_pata_exec_command(struct ata_port *ap, -@@ -107,11 +107,11 @@ static irqreturn_t rb153_pata_irq_handle - struct rb153_cf_info *info = ah->private_data; - - if (gpio_get_value(info->gpio_line)) { -- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); -+ irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); - if (!info->frozen) - ata_sff_interrupt(irq, dev_instance); - } else { -- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); -+ irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); - } - - return IRQ_HANDLED; -@@ -138,7 +138,6 @@ static void rb153_pata_setup_port(struct - - ap->ops = &rb153_pata_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ -- ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; - - ap->ioaddr.cmd_addr = info->iobase + RB153_CF_REG_CMD; - ap->ioaddr.ctl_addr = info->iobase + RB153_CF_REG_CTRL; diff --git a/target/linux/adm5120/patches-3.3/a11-adm5120_wdt-3.3-fixes.patch b/target/linux/adm5120/patches-3.3/a11-adm5120_wdt-3.3-fixes.patch deleted file mode 100644 index 261aa79724..0000000000 --- a/target/linux/adm5120/patches-3.3/a11-adm5120_wdt-3.3-fixes.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/watchdog/adm5120_wdt.c -+++ b/drivers/watchdog/adm5120_wdt.c -@@ -123,8 +123,7 @@ static ssize_t wdt_write(struct file *fi - return 0; - } - --static int wdt_ioctl(struct inode *inode, struct file *file, -- unsigned int cmd, unsigned long arg) -+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) - { - int new_timeout; - static struct watchdog_info ident = { -@@ -166,7 +165,7 @@ static const struct file_operations wdt_ - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = wdt_write, -- .ioctl = wdt_ioctl, -+ .unlocked_ioctl = wdt_ioctl, - .open = wdt_open, - .release = wdt_release, - }; diff --git a/target/linux/adm5120/patches-3.3/a12-adm5120sw-3.3-fixes.patch b/target/linux/adm5120/patches-3.3/a12-adm5120sw-3.3-fixes.patch deleted file mode 100644 index aa2be2e4ad..0000000000 --- a/target/linux/adm5120/patches-3.3/a12-adm5120sw-3.3-fixes.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/drivers/net/adm5120sw.c -+++ b/drivers/net/adm5120sw.c -@@ -38,6 +38,7 @@ - #include <asm/mach-adm5120/adm5120_switch.h> - - #include "adm5120sw.h" -+#include <linux/dma-mapping.h> - - #define DRV_NAME "adm5120-switch" - #define DRV_DESC "ADM5120 built-in ethernet switch driver" -@@ -153,7 +154,7 @@ static unsigned int cur_txl, dirty_txl; - - static unsigned int sw_used; - --static spinlock_t tx_lock = SPIN_LOCK_UNLOCKED; -+static DEFINE_SPINLOCK(tx_lock); - - /* ------------------------------------------------------------------------ */ - -@@ -216,6 +217,7 @@ static inline int desc_ipcsum_fail(struc - - /* ------------------------------------------------------------------------ */ - -+#ifdef CONFIG_ADM5120_SWITCH_DEBUG - static void sw_dump_desc(char *label, struct dma_desc *desc, int tx) - { - u32 t; -@@ -336,6 +338,11 @@ static void sw_dump_regs(void) - t = sw_read_reg(SWITCH_REG_RLDA); - SW_DBG("rlda: %08X\n", t); - } -+#else -+static inline void sw_dump_desc(char *label, struct dma_desc *desc, int tx) {} -+static void sw_dump_intr_mask(char *label, u32 mask) {} -+static inline void sw_dump_regs(void) {} -+#endif /* CONFIG_ADM5120_SWITCH_DEBUG */ - - /* ------------------------------------------------------------------------ */ - -@@ -502,7 +509,7 @@ static int adm5120_if_poll(struct napi_s - { - struct adm5120_if_priv *priv = container_of(napi, - struct adm5120_if_priv, napi); -- struct net_device *dev = priv->dev; -+ struct net_device *dev __maybe_unused = priv->dev; - int done; - u32 status; - -@@ -920,7 +927,7 @@ static void adm5120_if_tx_timeout(struct - SW_INFO("TX timeout on %s\n", dev->name); - } - --static void adm5120_if_set_multicast_list(struct net_device *dev) -+static void adm5120_if_set_rx_mode(struct net_device *dev) - { - struct adm5120_if_priv *priv = netdev_priv(dev); - u32 ports; -@@ -937,7 +944,7 @@ static void adm5120_if_set_multicast_lis - t |= (ports << CPUP_CONF_DUNP_SHIFT); - - if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || -- dev->mc_count) -+ netdev_mc_count(dev)) - /* enable multicast packets */ - t &= ~(ports << CPUP_CONF_DMCP_SHIFT); - else -@@ -1024,7 +1031,7 @@ static const struct net_device_ops adm51 - .ndo_open = adm5120_if_open, - .ndo_stop = adm5120_if_stop, - .ndo_start_xmit = adm5120_if_hard_start_xmit, -- .ndo_set_multicast_list = adm5120_if_set_multicast_list, -+ .ndo_set_rx_mode = adm5120_if_set_rx_mode, - .ndo_do_ioctl = adm5120_if_do_ioctl, - .ndo_tx_timeout = adm5120_if_tx_timeout, - .ndo_validate_addr = eth_validate_addr, -@@ -1076,7 +1083,7 @@ static void adm5120_switch_cleanup(void) - adm5120_switch_rx_ring_free(); - } - --static int __init adm5120_switch_probe(struct platform_device *pdev) -+static int __devinit adm5120_switch_probe(struct platform_device *pdev) - { - u32 t; - int i, err; diff --git a/target/linux/adm5120/patches-3.3/a13-adm5120_flash-3.3-fixes.patch b/target/linux/adm5120/patches-3.3/a13-adm5120_flash-3.3-fixes.patch deleted file mode 100644 index ea2e19f2ca..0000000000 --- a/target/linux/adm5120/patches-3.3/a13-adm5120_flash-3.3-fixes.patch +++ /dev/null @@ -1,166 +0,0 @@ ---- a/drivers/mtd/maps/adm5120-flash.c -+++ b/drivers/mtd/maps/adm5120-flash.c -@@ -54,10 +54,6 @@ struct adm5120_flash_info { - struct resource *res; - struct platform_device *dev; - struct adm5120_map_info amap; --#ifdef CONFIG_MTD_PARTITIONS -- int nr_parts; -- struct mtd_partition *parts[MAX_PARSED_PARTS]; --#endif - }; - - struct flash_desc { -@@ -96,7 +92,6 @@ static const char const *probe_types[] = - NULL - }; - --#ifdef CONFIG_MTD_PARTITIONS - static const char const *parse_types[] = { - "cmdlinepart", - #ifdef CONFIG_MTD_REDBOOT_PARTS -@@ -106,7 +101,6 @@ static const char const *parse_types[] = - "MyLoader", - #endif - }; --#endif - - #define BANK_SIZE (2<<20) - #define BANK_SIZE_MAX (4<<20) -@@ -318,89 +312,6 @@ static void adm5120_flash_initbanks(stru - info->mtd->size = info->amap.window_size; - } - --#ifdef CONFIG_MTD_PARTITIONS --static int adm5120_flash_initparts(struct adm5120_flash_info *info) --{ -- struct adm5120_flash_platform_data *pdata; -- struct map_info *map = &info->amap.map; -- int num_parsers; -- const char *parser[2]; -- int err = 0; -- int nr_parts; -- int i; -- -- info->nr_parts = 0; -- -- pdata = info->dev->dev.platform_data; -- if (pdata == NULL) -- goto out; -- -- if (pdata->nr_parts) { -- MAP_INFO(map, "adding static partitions\n"); -- err = add_mtd_partitions(info->mtd, pdata->parts, -- pdata->nr_parts); -- if (err == 0) { -- info->nr_parts += pdata->nr_parts; -- goto out; -- } -- } -- -- num_parsers = ARRAY_SIZE(parse_types); -- if (num_parsers > MAX_PARSED_PARTS) -- num_parsers = MAX_PARSED_PARTS; -- -- parser[1] = NULL; -- for (i = 0; i < num_parsers; i++) { -- parser[0] = parse_types[i]; -- -- MAP_INFO(map, "parsing \"%s\" partitions\n", -- parser[0]); -- nr_parts = parse_mtd_partitions(info->mtd, parser, -- &info->parts[i], 0); -- -- if (nr_parts <= 0) -- continue; -- -- MAP_INFO(map, "adding \"%s\" partitions\n", -- parser[0]); -- -- err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts); -- if (err) -- break; -- -- info->nr_parts += nr_parts; -- } --out: -- return err; --} --#else --static int adm5120_flash_initparts(struct adm5120_flash_info *info) --{ -- return 0; --} --#endif /* CONFIG_MTD_PARTITIONS */ -- --#ifdef CONFIG_MTD_PARTITIONS --static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) --{ -- int i; -- -- if (info->nr_parts) { -- del_mtd_partitions(info->mtd); -- for (i = 0; i < MAX_PARSED_PARTS; i++) -- if (info->parts[i] != NULL) -- kfree(info->parts[i]); -- } else { -- del_mtd_device(info->mtd); -- } --} --#else --static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) --{ -- del_mtd_device(info->mtd); --} --#endif -- - static int adm5120_flash_remove(struct platform_device *dev) - { - struct adm5120_flash_info *info; -@@ -412,7 +323,7 @@ static int adm5120_flash_remove(struct p - platform_set_drvdata(dev, NULL); - - if (info->mtd != NULL) { -- adm5120_flash_remove_mtd(info); -+ mtd_device_unregister(info->mtd); - map_destroy(info->mtd); - } - -@@ -429,11 +340,18 @@ static int adm5120_flash_remove(struct p - - static int adm5120_flash_probe(struct platform_device *dev) - { -+ struct adm5120_flash_platform_data *pdata; - struct adm5120_flash_info *info; - struct map_info *map; - const char **probe_type; - int err; - -+ pdata = dev->dev.platform_data; -+ if (!pdata) { -+ dev_err(&dev->dev, "no platform data\n"); -+ return -EINVAL; -+ } -+ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (info == NULL) { - err = -ENOMEM; -@@ -484,16 +402,11 @@ static int adm5120_flash_probe(struct pl - - info->mtd->owner = THIS_MODULE; - -- err = adm5120_flash_initparts(info); -+ err = mtd_device_parse_register(info->mtd, parse_types, 0, -+ pdata->parts, pdata->nr_parts); - if (err) - goto err_out; - -- if (info->nr_parts == 0) { -- MAP_INFO(map, "no partitions available, registering " -- "whole flash\n"); -- add_mtd_device(info->mtd); -- } -- - return 0; - - err_out: diff --git a/target/linux/adm5120/patches-3.3/a14-mtd-trxsplit-fixes.patch b/target/linux/adm5120/patches-3.3/a14-mtd-trxsplit-fixes.patch deleted file mode 100644 index f9ececf61c..0000000000 --- a/target/linux/adm5120/patches-3.3/a14-mtd-trxsplit-fixes.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/mtd/trxsplit.c -+++ b/drivers/mtd/trxsplit.c -@@ -144,7 +144,7 @@ static void trxsplit_create_partitions(s - part = &trx_parts[i]; - part->name = "rootfs"; - -- err = add_mtd_partitions(mtd, trx_parts, trx_nr_parts); -+ err = mtd_device_register(mtd, trx_parts, trx_nr_parts); - if (err) { - printk(KERN_ALERT PFX "adding TRX partitions failed\n"); - return; -@@ -159,7 +159,7 @@ static int trxsplit_refresh_partitions(s - mtd->name, MTD_BLOCK_MAJOR, mtd->index); - - /* remove old partitions */ -- del_mtd_partitions(mtd); -+ mtd_device_unregister(mtd); - - trxsplit_findtrx(mtd); - if (!trx_mtd) diff --git a/target/linux/adm5120/patches-3.3/a15-adm5120-usb-driver-cleanup.patch b/target/linux/adm5120/patches-3.3/a15-adm5120-usb-driver-cleanup.patch deleted file mode 100644 index 5994d43c8a..0000000000 --- a/target/linux/adm5120/patches-3.3/a15-adm5120-usb-driver-cleanup.patch +++ /dev/null @@ -1,582 +0,0 @@ ---- a/drivers/usb/host/adm5120.h -+++ b/drivers/usb/host/adm5120.h -@@ -403,6 +403,7 @@ struct admhcd { - * other external transceivers should be software-transparent - */ - struct otg_transceiver *transceiver; -+ void (*start_hnp)(struct admhcd *ahcd); - #endif - - /* -@@ -537,15 +538,7 @@ static inline struct usb_hcd *admhcd_to_ - * Big-endian read/write functions are arch-specific. - * Other arches can be added if/when they're needed. - * -- * REVISIT: arch/powerpc now has readl/writel_be, so the -- * definition below can die once the STB04xxx support is -- * finally ported over. - */ --#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) --#define readl_be(addr) in_be32((__force unsigned *)addr) --#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) --#endif -- - static inline unsigned int admhc_readl(const struct admhcd *ahcd, - __hc32 __iomem *regs) - { ---- a/drivers/usb/host/adm5120-drv.c -+++ b/drivers/usb/host/adm5120-drv.c -@@ -9,7 +9,7 @@ - * (C) Copyright 2002 Hewlett-Packard Company - * - * Written by Christopher Hoover <ch@hpl.hp.com> -- * Based on fragments of previous driver by Rusell King et al. -+ * Based on fragments of previous driver by Russell King et al. - * - * Modified for LH7A404 from ahcd-sa1111.c - * by Durgesh Pattamatta <pattamattad@sharpsec.com> -@@ -81,7 +81,7 @@ static int admhc_adm5120_probe(const str - - admhc_hcd_init(hcd_to_admhcd(hcd)); - -- retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ retval = usb_add_hcd(hcd, irq, 0); - if (retval) - goto err_io; - -@@ -109,10 +109,7 @@ static void admhc_adm5120_remove(struct - usb_put_hcd(hcd); - } - --/*-------------------------------------------------------------------------*/ -- --static int __devinit --admhc_adm5120_start(struct usb_hcd *hcd) -+static int __devinit admhc_adm5120_start(struct usb_hcd *hcd) - { - struct admhcd *ahcd = hcd_to_admhcd(hcd); - int ret; -@@ -137,8 +134,6 @@ err: - return ret; - } - --/*-------------------------------------------------------------------------*/ -- - static const struct hc_driver adm5120_hc_driver = { - .description = hcd_name, - .product_desc = "ADM5120 built-in USB 1.1 Host Controller", -@@ -181,8 +176,6 @@ static const struct hc_driver adm5120_hc - .start_port_reset = admhc_start_port_reset, - }; - --/*-------------------------------------------------------------------------*/ -- - static int usb_hcd_adm5120_probe(struct platform_device *pdev) - { - int ret; ---- a/drivers/usb/host/adm5120-dbg.c -+++ b/drivers/usb/host/adm5120-dbg.c -@@ -401,25 +401,28 @@ static const struct file_operations debu - .open = debug_async_open, - .read = debug_output, - .release = debug_close, -+ .llseek = default_llseek, - }; - static const struct file_operations debug_periodic_fops = { - .owner = THIS_MODULE, - .open = debug_periodic_open, - .read = debug_output, - .release = debug_close, -+ .llseek = default_llseek, - }; - static const struct file_operations debug_registers_fops = { - .owner = THIS_MODULE, - .open = debug_registers_open, - .read = debug_output, - .release = debug_close, -+ .llseek = default_llseek, - }; - - static struct dentry *admhc_debug_root; - - struct debug_buffer { - ssize_t (*fill_func)(struct debug_buffer *); /* fill method */ -- struct device *dev; -+ struct admhcd *ahcd; - struct mutex mutex; /* protect filling of buffer */ - size_t count; /* number of characters filled into buffer */ - char *page; -@@ -494,15 +497,11 @@ show_list(struct admhcd *ahcd, char *buf - - static ssize_t fill_async_buffer(struct debug_buffer *buf) - { -- struct usb_bus *bus; -- struct usb_hcd *hcd; - struct admhcd *ahcd; - size_t temp; - unsigned long flags; - -- bus = dev_get_drvdata(buf->dev); -- hcd = bus_to_hcd(bus); -- ahcd = hcd_to_admhcd(hcd); -+ ahcd = buf->ahcd; - - spin_lock_irqsave(&ahcd->lock, flags); - temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head); -@@ -516,8 +515,6 @@ static ssize_t fill_async_buffer(struct - - static ssize_t fill_periodic_buffer(struct debug_buffer *buf) - { -- struct usb_bus *bus; -- struct usb_hcd *hcd; - struct admhcd *ahcd; - struct ed **seen, *ed; - unsigned long flags; -@@ -530,9 +527,7 @@ static ssize_t fill_periodic_buffer(stru - return 0; - seen_count = 0; - -- bus = dev_get_drvdata(buf->dev); -- hcd = bus_to_hcd(bus); -- ahcd = hcd_to_admhcd(hcd); -+ ahcd = buf->ahcd; - next = buf->page; - size = PAGE_SIZE; - -@@ -615,7 +610,6 @@ static ssize_t fill_periodic_buffer(stru - - static ssize_t fill_registers_buffer(struct debug_buffer *buf) - { -- struct usb_bus *bus; - struct usb_hcd *hcd; - struct admhcd *ahcd; - struct admhcd_regs __iomem *regs; -@@ -624,9 +618,8 @@ static ssize_t fill_registers_buffer(str - char *next; - u32 rdata; - -- bus = dev_get_drvdata(buf->dev); -- hcd = bus_to_hcd(bus); -- ahcd = hcd_to_admhcd(hcd); -+ ahcd = buf->ahcd; -+ hcd = admhc_to_hcd(ahcd); - regs = ahcd->regs; - next = buf->page; - size = PAGE_SIZE; -@@ -638,13 +631,13 @@ static ssize_t fill_registers_buffer(str - admhc_dbg_sw(ahcd, &next, &size, - "bus %s, device %s\n" - "%s\n" -- "%s version " DRIVER_VERSION "\n", -+ "%s\n", - hcd->self.controller->bus->name, - dev_name(hcd->self.controller), - hcd->product_desc, - hcd_name); - -- if (bus->controller->power.power_state.event) { -+ if (!HCD_HW_ACCESSIBLE(hcd)) { - size -= scnprintf(next, size, - "SUSPENDED (no register access)\n"); - goto done; -@@ -691,7 +684,7 @@ done: - } - - --static struct debug_buffer *alloc_buffer(struct device *dev, -+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd, - ssize_t (*fill_func)(struct debug_buffer *)) - { - struct debug_buffer *buf; -@@ -699,7 +692,7 @@ static struct debug_buffer *alloc_buffer - buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL); - - if (buf) { -- buf->dev = dev; -+ buf->ahcd = ahcd; - buf->fill_func = fill_func; - mutex_init(&buf->mutex); - } -@@ -792,26 +785,25 @@ static int debug_registers_open(struct i - static inline void create_debug_files(struct admhcd *ahcd) - { - struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self; -- struct device *dev = bus->dev; - - ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root); - if (!ahcd->debug_dir) - goto dir_error; - - ahcd->debug_async = debugfs_create_file("async", S_IRUGO, -- ahcd->debug_dir, dev, -+ ahcd->debug_dir, ahcd, - &debug_async_fops); - if (!ahcd->debug_async) - goto async_error; - - ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO, -- ahcd->debug_dir, dev, -+ ahcd->debug_dir, ahcd, - &debug_periodic_fops); - if (!ahcd->debug_periodic) - goto periodic_error; - - ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO, -- ahcd->debug_dir, dev, -+ ahcd->debug_dir, ahcd, - &debug_registers_fops); - if (!ahcd->debug_registers) - goto registers_error; ---- a/drivers/usb/host/adm5120-pm.c -+++ b/drivers/usb/host/adm5120-pm.c -@@ -257,7 +257,7 @@ static int admhc_bus_suspend(struct usb_ - - spin_lock_irq(&ahcd->lock); - -- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) -+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) - rc = -ESHUTDOWN; - else - rc = admhc_rh_suspend(ahcd, 0); -@@ -275,7 +275,7 @@ static int admhc_bus_resume(struct usb_h - - spin_lock_irq(&ahcd->lock); - -- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) -+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) - rc = -ESHUTDOWN; - else - rc = admhc_rh_resume(ahcd); ---- a/drivers/usb/host/adm5120-hcd.c -+++ b/drivers/usb/host/adm5120-hcd.c -@@ -32,9 +32,9 @@ - #include <linux/list.h> - #include <linux/usb.h> - #include <linux/usb/otg.h> -+#include <linux/usb/hcd.h> - #include <linux/dma-mapping.h> - #include <linux/dmapool.h> --#include <linux/reboot.h> - #include <linux/debugfs.h> - #include <linux/io.h> - -@@ -43,9 +43,6 @@ - #include <asm/unaligned.h> - #include <asm/byteorder.h> - --#include "../core/hcd.h" --#include "../core/hub.h" -- - #define DRIVER_VERSION "0.27.0" - #define DRIVER_AUTHOR "Gabor Juhos <juhosg@openwrt.org>" - #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" -@@ -117,7 +114,7 @@ static int admhc_urb_enqueue(struct usb_ - td_cnt = 2; - /* FALLTHROUGH */ - case PIPE_BULK: -- /* one TD for every 4096 Bytes (can be upto 8K) */ -+ /* one TD for every 4096 Bytes (can be up to 8K) */ - td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX; - /* ... and for any remaining bytes ... */ - if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0) -@@ -153,7 +150,7 @@ static int admhc_urb_enqueue(struct usb_ - - spin_lock_irqsave(&ahcd->lock, flags); - /* don't submit to a dead HC */ -- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { -+ if (!HCD_HW_ACCESSIBLE(hcd)) { - ret = -ENODEV; - goto fail; - } -@@ -321,7 +318,6 @@ sanitize: - ep->hcpriv = NULL; - - spin_unlock_irqrestore(&ahcd->lock, flags); -- return; - } - - static int admhc_get_frame_number(struct usb_hcd *hcd) -@@ -488,7 +484,7 @@ err: - */ - static int admhc_run(struct admhcd *ahcd) - { -- u32 temp; -+ u32 val; - int first = ahcd->fminterval == 0; - struct usb_hcd *hcd = admhcd_to_hcd(ahcd); - -@@ -496,8 +492,8 @@ static int admhc_run(struct admhcd *ahcd - - /* boot firmware should have set this up (5.1.1.3.1) */ - if (first) { -- temp = admhc_readl(ahcd, &ahcd->regs->fminterval); -- ahcd->fminterval = temp & ADMHC_SFI_FI_MASK; -+ val = admhc_readl(ahcd, &ahcd->regs->fminterval); -+ ahcd->fminterval = val & ADMHC_SFI_FI_MASK; - if (ahcd->fminterval != FI) - admhc_dbg(ahcd, "fminterval delta %d\n", - ahcd->fminterval - FI); -@@ -507,30 +503,30 @@ static int admhc_run(struct admhcd *ahcd - } - - #if 0 /* TODO: not applicable */ -- /* Reset USB nearly "by the book". RemoteWakeupConnected was -- * saved if boot firmware (BIOS/SMM/...) told us it's connected, -- * or if bus glue did the same (e.g. for PCI add-in cards with -- * PCI PM support). -+ /* Reset USB nearly "by the book". RemoteWakeupConnected has -+ * to be checked in case boot firmware (BIOS/SMM/...) has set up -+ * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). -+ * If the bus glue detected wakeup capability then it should -+ * already be enabled; if so we'll just enable it again. - */ -- if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0 -- && !device_may_wakeup(hcd->self.controller)) -- device_init_wakeup(hcd->self.controller, 1); -+ if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0) -+ device_set_wakeup_capable(hcd->self.controller, 1); - #endif - - switch (ahcd->host_control & ADMHC_HC_BUSS) { - case ADMHC_BUSS_OPER: -- temp = 0; -+ val = 0; - break; - case ADMHC_BUSS_SUSPEND: - /* FALLTHROUGH ? */ - case ADMHC_BUSS_RESUME: - ahcd->host_control = ADMHC_BUSS_RESUME; -- temp = 10 /* msec wait */; -+ val = 10 /* msec wait */; - break; - /* case ADMHC_BUSS_RESET: */ - default: - ahcd->host_control = ADMHC_BUSS_RESET; -- temp = 50 /* msec wait */; -+ val = 50 /* msec wait */; - break; - } - admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); -@@ -538,12 +534,12 @@ static int admhc_run(struct admhcd *ahcd - /* flush the writes */ - admhc_writel_flush(ahcd); - -- msleep(temp); -- temp = admhc_read_rhdesc(ahcd); -- if (!(temp & ADMHC_RH_NPS)) { -+ msleep(val); -+ val = admhc_read_rhdesc(ahcd); -+ if (!(val & ADMHC_RH_NPS)) { - /* power down each port */ -- for (temp = 0; temp < ahcd->num_ports; temp++) -- admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP); -+ for (val = 0; val < ahcd->num_ports; val++) -+ admhc_write_portstatus(ahcd, val, ADMHC_PS_CPP); - } - /* flush those writes */ - admhc_writel_flush(ahcd); -@@ -552,9 +548,9 @@ static int admhc_run(struct admhcd *ahcd - spin_lock_irq(&ahcd->lock); - - admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol); -- temp = 30; /* ... allow extra time */ -+ val = 30; /* ... allow extra time */ - while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) { -- if (--temp == 0) { -+ if (--val == 0) { - spin_unlock_irq(&ahcd->lock); - admhc_err(ahcd, "USB HC reset timed out!\n"); - return -1; -@@ -571,7 +567,7 @@ static int admhc_run(struct admhcd *ahcd - periodic_reinit(ahcd); - - /* use rhsc irqs after khubd is fully initialized */ -- hcd->poll_rh = 1; -+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - hcd->uses_new_polling = 1; - - #if 0 -@@ -594,10 +590,10 @@ static int admhc_run(struct admhcd *ahcd - ahcd->host_control = ADMHC_BUSS_OPER; - admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); - -- temp = 20; -+ val = 20; - while ((admhc_readl(ahcd, &ahcd->regs->host_control) - & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) { -- if (--temp == 0) { -+ if (--val == 0) { - spin_unlock_irq(&ahcd->lock); - admhc_err(ahcd, "unable to setup operational mode!\n"); - return -1; -@@ -613,10 +609,10 @@ static int admhc_run(struct admhcd *ahcd - /* FIXME: enabling DMA is always failed here for an unknown reason */ - admhc_dma_enable(ahcd); - -- temp = 200; -+ val = 200; - while ((admhc_readl(ahcd, &ahcd->regs->host_control) - & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) { -- if (--temp == 0) { -+ if (--val == 0) { - spin_unlock_irq(&ahcd->lock); - admhc_err(ahcd, "unable to enable DMA!\n"); - admhc_dump(ahcd, 1); -@@ -688,7 +684,7 @@ static irqreturn_t admhc_irq(struct usb_ - */ - admhc_vdbg(ahcd, "Resume Detect\n"); - admhc_intr_ack(ahcd, ADMHC_INTR_RESI); -- hcd->poll_rh = 1; -+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - if (ahcd->autostop) { - spin_lock(&ahcd->lock); - admhc_rh_resume(ahcd); -@@ -799,9 +795,10 @@ static int __init admhc_hcd_mod_init(voi - pr_info("%s: " DRIVER_INFO "\n", hcd_name); - pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, - sizeof(struct ed), sizeof(struct td)); -+ set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); - - #ifdef DEBUG -- admhc_debug_root = debugfs_create_dir("admhc", NULL); -+ admhc_debug_root = debugfs_create_dir("admhc", usb_debug_root); - if (!admhc_debug_root) { - ret = -ENOENT; - goto error_debug; -@@ -826,6 +823,7 @@ error_platform: - admhc_debug_root = NULL; - error_debug: - #endif -+ clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); - return ret; - } - module_init(admhc_hcd_mod_init); -@@ -836,6 +834,7 @@ static void __exit admhc_hcd_mod_exit(vo - #ifdef DEBUG - debugfs_remove(admhc_debug_root); - #endif -+ clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); - } - module_exit(admhc_hcd_mod_exit); - ---- a/drivers/usb/host/adm5120-hub.c -+++ b/drivers/usb/host/adm5120-hub.c -@@ -75,7 +75,7 @@ admhc_hub_status_data(struct usb_hcd *hc - u32 status; - - spin_lock_irqsave(&ahcd->lock, flags); -- if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) -+ if (!HCD_HW_ACCESSIBLE(hcd)) - goto done; - - /* init status */ -@@ -106,8 +106,11 @@ admhc_hub_status_data(struct usb_hcd *hc - } - } - -- hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed, -- any_connected); -+ if (admhc_root_hub_state_changes(ahcd, changed, -+ any_connected)) -+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); -+ else -+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - - done: - spin_unlock_irqrestore(&ahcd->lock, flags); -@@ -143,9 +146,9 @@ static int admhc_get_hub_descriptor(stru - temp |= 0x0008; - desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp); - -- /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ -- desc->bitmap[0] = 0; -- desc->bitmap[0] = ~0; -+ /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ -+ desc->u.hs.DeviceRemovable[0] = 0; -+ desc->u.hs.DeviceRemovable[0] = ~0; - - return 0; - } -@@ -310,10 +313,10 @@ static int admhc_hub_control(struct usb_ - u16 wIndex, char *buf, u16 wLength) - { - struct admhcd *ahcd = hcd_to_admhcd(hcd); -- int ports = hcd_to_bus(hcd)->root_hub->maxchild; -+ int ports = ahcd->num_ports; - int ret = 0; - -- if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) -+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) - return -ESHUTDOWN; - - switch (typeReq) { ---- a/drivers/usb/host/adm5120-q.c -+++ b/drivers/usb/host/adm5120-q.c -@@ -14,6 +14,7 @@ - */ - - #include <linux/irq.h> -+#include <linux/slab.h> - - /*-------------------------------------------------------------------------*/ - -@@ -300,7 +301,7 @@ static struct ed *ed_get(struct admhcd * - u32 info; - - /* FIXME: usbcore changes dev->devnum before SET_ADDRESS -- * suceeds ... otherwise we wouldn't need "pipe". -+ * succeeds ... otherwise we wouldn't need "pipe". - */ - info = usb_pipedevice(pipe); - info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT; -@@ -634,8 +635,7 @@ static int td_done(struct admhcd *ahcd, - - /*-------------------------------------------------------------------------*/ - --static inline void --ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev) -+static void ed_halted(struct admhcd *ahcd, struct td *td, int cc) - { - struct urb *urb = td->urb; - struct urb_priv *urb_priv = urb->hcpriv; -@@ -764,6 +764,7 @@ rescan_this: - struct urb *urb; - struct urb_priv *urb_priv; - __hc32 savebits; -+ u32 tdINFO; - int status; - - td = list_entry(entry, struct td, td_list); -@@ -781,6 +782,16 @@ rescan_this: - /* patch pointer hc uses */ - savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK); - *prev = td->hwNextTD | savebits; -+ /* If this was unlinked, the TD may not have been -+ * retired ... so manually save dhe data toggle. -+ * The controller ignores the value we save for -+ * control and ISO endpoints. -+ */ -+ tdINFO = hc32_to_cpup(ahcd, &td->hwINFO); -+ if ((tdINFO & TD_T) == TD_T_DATA0) -+ ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_C); -+ else if ((tdINFO & TD_T) == TD_T_DATA1) -+ ed->hwHeadP |= cpu_to_hc32(ahcd, ED_C); - - /* HC may have partly processed this TD */ - #ifdef ADMHC_VERBOSE_DEBUG -@@ -816,13 +827,12 @@ rescan_this: - } - - /*-------------------------------------------------------------------------*/ -- - /* - * Process normal completions (error or success) and clean the schedules. - * - * This is the main path for handing urbs back to drivers. The only other -- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of -- * scanning the (re-reversed) donelist as this does. -+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list, -+ * instead of scanning the (re-reversed) donelist as this does. - */ - - static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb) |