diff options
Diffstat (limited to 'target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch')
-rw-r--r-- | target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch | 306 |
1 files changed, 0 insertions, 306 deletions
diff --git a/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch b/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch deleted file mode 100644 index 4ee4af6efd..0000000000 --- a/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch +++ /dev/null @@ -1,306 +0,0 @@ ---- a/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -+++ b/arch/mips/include/asm/mach-adm5120/adm5120_platform.h -@@ -28,10 +28,8 @@ struct adm5120_flash_platform_data { - void (*set_vpp)(struct map_info *, int); - void (*switch_bank)(unsigned); - u32 window_size; --#ifdef CONFIG_MTD_PARTITIONS - unsigned int nr_parts; - struct mtd_partition *parts; --#endif - }; - - struct adm5120_switch_platform_data { ---- a/arch/mips/adm5120/infineon/infineon.c -+++ b/arch/mips/adm5120/infineon/infineon.c -@@ -16,7 +16,6 @@ - #define EASY_CONFIG_OFFSET 0x10000 - #define EASY_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", -@@ -33,7 +32,6 @@ static struct mtd_partition easy_partiti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static __init void easy_setup_mac(void) - { -@@ -68,10 +66,8 @@ void __init easy_setup_pqfp(void) - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); -@@ -100,10 +96,8 @@ void __init easy_setup_bga(void) - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); ---- a/arch/mips/adm5120/cellvision/cellvision.c -+++ b/arch/mips/adm5120/cellvision/cellvision.c -@@ -19,7 +19,6 @@ - #define CELLVISION_CONFIG_OFFSET 0x8000 - #define CELLVISION_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition cas6xx_partitions[] = { - { - .name = "admboot", -@@ -65,7 +64,6 @@ static struct mtd_partition cas7xx_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static void switch_bank_gpio5(unsigned bank) - { -@@ -105,20 +103,16 @@ void __init cellvision_mac_setup(void) - - void __init cas6xx_flash_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - cellvision_flash_setup(); - } - - void __init cas7xx_flash_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); - adm5120_flash0_data.parts = cas7xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - cellvision_flash_setup(); - } ---- a/arch/mips/adm5120/edimax/br-61xx.c -+++ b/arch/mips/adm5120/edimax/br-61xx.c -@@ -18,7 +18,6 @@ - #define BR61XX_CONFIG_OFFSET 0x8000 - #define BR61XX_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition br61xx_partitions[] = { - { - .name = "admboot", -@@ -35,7 +34,6 @@ static struct mtd_partition br61xx_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct gpio_button br61xx_gpio_buttons[] __initdata = { - { -@@ -68,10 +66,8 @@ static void __init br61xx_mac_setup(void - void __init br61xx_generic_setup(void) - { - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions); - adm5120_flash0_data.parts = br61xx_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK); ---- a/arch/mips/adm5120/mikrotik/rb-1xx.c -+++ b/arch/mips/adm5120/mikrotik/rb-1xx.c -@@ -25,7 +25,6 @@ static struct adm5120_pci_irq rb1xx_pci_ - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) - }; - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition rb1xx_nor_parts[] = { - { - .name = "booter", -@@ -50,7 +49,6 @@ static struct mtd_partition rb1xx_nand_p - .size = MTDPART_SIZ_FULL - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - /* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -@@ -79,10 +77,8 @@ static int rb1xx_nand_fixup(struct mtd_i - struct platform_nand_data rb1xx_nand_data __initdata = { - .chip = { - .nr_chips = 1, --#ifdef CONFIG_MTD_PARTITIONS - .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts), - .partitions = rb1xx_nand_parts, --#endif /* CONFIG_MTD_PARTITIONS */ - .chip_delay = RB1XX_NAND_CHIP_DELAY, - .options = NAND_NO_AUTOINCR, - .chip_fixup = rb1xx_nand_fixup, -@@ -114,10 +110,8 @@ static void __init rb1xx_mac_setup(void) - void __init rb1xx_add_device_flash(void) - { - /* setup data for flash0 device */ --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts); - adm5120_flash0_data.parts = rb1xx_nor_parts; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_flash0_data.window_size = 128*1024; - - adm5120_add_device_flash(0); ---- a/arch/mips/adm5120/compex/wp54.c -+++ b/arch/mips/adm5120/compex/wp54.c -@@ -11,7 +11,6 @@ - - #include "compex.h" - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", -@@ -28,7 +27,6 @@ static struct mtd_partition wp54g_wrt_pa - .size = 0x010000, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -@@ -83,10 +81,8 @@ MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", - - static void __init wp54_wrt_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); - adm5120_flash0_data.parts = wp54g_wrt_partitions; --#endif - - wp54_setup(); - } ---- a/arch/mips/adm5120/zyxel/p-33x.c -+++ b/arch/mips/adm5120/zyxel/p-33x.c -@@ -16,7 +16,6 @@ - #define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 - #define P33X_GPIO_DEV_MASK (1 << P33X_GPIO_FLASH_A20) - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition p33x_partitions[] = { - { - .name = "bootbase", -@@ -46,7 +45,6 @@ static struct mtd_partition p33x_partiti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -@@ -75,10 +73,8 @@ void __init p33x_generic_setup(void) - gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */ - gpio_direction_output(P33X_GPIO_FLASH_A20, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); - adm5120_flash0_data.parts = p33x_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_uart(0); ---- a/arch/mips/adm5120/generic/eb-214a.c -+++ b/arch/mips/adm5120/generic/eb-214a.c -@@ -28,7 +28,6 @@ - #define EB214A_GPIO_DEV_MASK 0 - #define EB214A_CONFIG_OFFSET 0x4000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition eb214a_partitions[] = { - { - .name = "bootloader", -@@ -45,7 +44,6 @@ static struct mtd_partition eb214a_parti - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = { - PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0), -@@ -94,10 +92,8 @@ static void __init eb214a_mac_setup(void - - static void __init eb214a_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions); - adm5120_flash0_data.parts = eb214a_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - adm5120_add_device_flash(0); - - adm5120_add_device_gpio(EB214A_GPIO_DEV_MASK); ---- a/arch/mips/adm5120/motorola/pmugw.c -+++ b/arch/mips/adm5120/motorola/pmugw.c -@@ -26,7 +26,6 @@ - #define PMUGW_CONFIG_OFFSET 0x10000 - #define PMUGW_CONFIG_SIZE 0x1000 - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition pmugw_partitions[] = { - { - .name = "admboot", -@@ -43,7 +42,6 @@ static struct mtd_partition pmugw_partit - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static u8 pmugw_vlans[6] __initdata = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -@@ -82,10 +80,8 @@ void __init pmugw_setup(void) - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions); - adm5120_flash0_data.parts = pmugw_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(1); /* ttyS0 */ - adm5120_add_device_uart(0); /* ttyS1 */ ---- a/arch/mips/adm5120/osbridge/5gxi.c -+++ b/arch/mips/adm5120/osbridge/5gxi.c -@@ -20,7 +20,6 @@ - #include <asm/mach-adm5120/adm5120_platform.h> - #include <asm/mach-adm5120/adm5120_info.h> - --#ifdef CONFIG_MTD_PARTITIONS - static struct mtd_partition osbridge_5gxi_partitions[] = { - { - .name = "bootloader", -@@ -37,7 +36,6 @@ static struct mtd_partition osbridge_5gx - .size = MTDPART_SIZ_FULL, - } - }; --#endif /* CONFIG_MTD_PARTITIONS */ - - static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = { - GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL), -@@ -54,10 +52,8 @@ static u8 osbridge_5gxi_vlans[6] __initd - - static void __init osbridge_5gxi_setup(void) - { --#ifdef CONFIG_MTD_PARTITIONS - adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions); - adm5120_flash0_data.parts = osbridge_5gxi_partitions; --#endif /* CONFIG_MTD_PARTITIONS */ - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); |