diff options
Diffstat (limited to 'package')
| -rw-r--r-- | package/linux/Makefile | 1 | ||||
| -rw-r--r-- | package/linux/kernel-patches/023-drivers_parport_Makefile.bz2 | bin | 0 -> 305 bytes | |||
| -rw-r--r-- | package/linux/kernel-patches/024-drivers_parport_Config_in.bz2 | bin | 0 -> 391 bytes | |||
| -rw-r--r-- | package/linux/kernel-source/drivers/parport/parport_splink.c | 345 | ||||
| -rw-r--r-- | package/linux/linux.config | 82 |
5 files changed, 349 insertions, 79 deletions
diff --git a/package/linux/Makefile b/package/linux/Makefile index 6ed9837500..5c74d39eb2 100644 --- a/package/linux/Makefile +++ b/package/linux/Makefile @@ -68,6 +68,7 @@ $(eval $(call KMOD_template,USB,usb,\ ,CONFIG_USB)) $(eval $(call KMOD_template,LP,lp,\ $(MODULES_DIR)/kernel/drivers/parport/parport.o \ + $(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \ $(MODULES_DIR)/kernel/drivers/char/lp.o \ ,CONFIG_PARPORT)) $(eval $(call KMOD_template,VFAT,vfat,\ diff --git a/package/linux/kernel-patches/023-drivers_parport_Makefile.bz2 b/package/linux/kernel-patches/023-drivers_parport_Makefile.bz2 Binary files differnew file mode 100644 index 0000000000..aae55970a3 --- /dev/null +++ b/package/linux/kernel-patches/023-drivers_parport_Makefile.bz2 diff --git a/package/linux/kernel-patches/024-drivers_parport_Config_in.bz2 b/package/linux/kernel-patches/024-drivers_parport_Config_in.bz2 Binary files differnew file mode 100644 index 0000000000..7cc9529f26 --- /dev/null +++ b/package/linux/kernel-patches/024-drivers_parport_Config_in.bz2 diff --git a/package/linux/kernel-source/drivers/parport/parport_splink.c b/package/linux/kernel-source/drivers/parport/parport_splink.c new file mode 100644 index 0000000000..0f5a81b85d --- /dev/null +++ b/package/linux/kernel-source/drivers/parport/parport_splink.c @@ -0,0 +1,345 @@ +/* Low-level parallel port routines for the ASUS WL-500g built-in port + * + * Author: Nuno Grilo <nuno.grilo@netcabo.pt> + * Based on parport_pc source + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/parport.h> +#include <linux/parport_pc.h> + +#define SPLINK_ADDRESS 0xBF800010 + +#undef DEBUG + +#ifdef DEBUG +#define DPRINTK printk +#else +#define DPRINTK(stuff...) +#endif + + +/* __parport_splink_frob_control differs from parport_splink_frob_control in that + * it doesn't do any extra masking. */ +static __inline__ unsigned char __parport_splink_frob_control (struct parport *p, + unsigned char mask, + unsigned char val) +{ + struct parport_pc_private *priv = p->physport->private_data; + unsigned char *io = (unsigned char *) p->base; + unsigned char ctr = priv->ctr; +#ifdef DEBUG_PARPORT + printk (KERN_DEBUG + "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n", + mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); +#endif + ctr = (ctr & ~mask) ^ val; + ctr &= priv->ctr_writable; /* only write writable bits. */ + *(io+2) = ctr; + priv->ctr = ctr; /* Update soft copy */ + return ctr; +} + + + +static void parport_splink_data_forward (struct parport *p) +{ + DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); + __parport_splink_frob_control (p, 0x20, 0); +} + +static void parport_splink_data_reverse (struct parport *p) +{ + DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); + __parport_splink_frob_control (p, 0x20, 0x20); +} + +/* +static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n"); + parport_generic_irq(irq, (struct parport *) dev_id, regs); +} +*/ + +static void parport_splink_enable_irq(struct parport *p) +{ + DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n"); + __parport_splink_frob_control (p, 0x10, 0x10); +} + +static void parport_splink_disable_irq(struct parport *p) +{ + DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n"); + __parport_splink_frob_control (p, 0x10, 0); +} + +static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s) +{ + DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n"); + s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0); + if (dev->irq_func && + dev->port->irq != PARPORT_IRQ_NONE) + /* Set ackIntEn */ + s->u.pc.ctr |= 0x10; +} + +static void parport_splink_save_state(struct parport *p, struct parport_state *s) +{ + const struct parport_pc_private *priv = p->physport->private_data; + DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n"); + s->u.pc.ctr = priv->ctr; +} + +static void parport_splink_restore_state(struct parport *p, struct parport_state *s) +{ + struct parport_pc_private *priv = p->physport->private_data; + unsigned char *io = (unsigned char *) p->base; + unsigned char ctr = s->u.pc.ctr; + + DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n"); + *(io+2) = ctr; + priv->ctr = ctr; +} + +static void parport_splink_setup_interrupt(void) { + return; +} + +static void parport_splink_write_data(struct parport *p, unsigned char d) { + DPRINTK(KERN_DEBUG "parport_splink: write data called\n"); + unsigned char *io = (unsigned char *) p->base; + *io = d; +} + +static unsigned char parport_splink_read_data(struct parport *p) { + DPRINTK(KERN_DEBUG "parport_splink: read data called\n"); + unsigned char *io = (unsigned char *) p->base; + return *io; +} + +static void parport_splink_write_control(struct parport *p, unsigned char d) +{ + const unsigned char wm = (PARPORT_CONTROL_STROBE | + PARPORT_CONTROL_AUTOFD | + PARPORT_CONTROL_INIT | + PARPORT_CONTROL_SELECT); + + DPRINTK(KERN_DEBUG "parport_splink: write control called\n"); + /* Take this out when drivers have adapted to the newer interface. */ + if (d & 0x20) { + printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", + p->name, p->cad->name); + parport_splink_data_reverse (p); + } + + __parport_splink_frob_control (p, wm, d & wm); +} + +static unsigned char parport_splink_read_control(struct parport *p) +{ + const unsigned char wm = (PARPORT_CONTROL_STROBE | + PARPORT_CONTROL_AUTOFD | + PARPORT_CONTROL_INIT | + PARPORT_CONTROL_SELECT); + DPRINTK(KERN_DEBUG "parport_splink: read control called\n"); + const struct parport_pc_private *priv = p->physport->private_data; + return priv->ctr & wm; /* Use soft copy */ +} + +static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask, + unsigned char val) +{ + const unsigned char wm = (PARPORT_CONTROL_STROBE | + PARPORT_CONTROL_AUTOFD | + PARPORT_CONTROL_INIT | + PARPORT_CONTROL_SELECT); + + DPRINTK(KERN_DEBUG "parport_splink: frob control called\n"); + /* Take this out when drivers have adapted to the newer interface. */ + if (mask & 0x20) { + printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", + p->name, p->cad->name, + (val & 0x20) ? "reverse" : "forward"); + if (val & 0x20) + parport_splink_data_reverse (p); + else + parport_splink_data_forward (p); + } + + /* Restrict mask and val to control lines. */ + mask &= wm; + val &= wm; + + return __parport_splink_frob_control (p, mask, val); +} + +static unsigned char parport_splink_read_status(struct parport *p) +{ + DPRINTK(KERN_DEBUG "parport_splink: read status called\n"); + unsigned char *io = (unsigned char *) p->base; + return *(io+1); +} + +static void parport_splink_inc_use_count(void) +{ +#ifdef MODULE + MOD_INC_USE_COUNT; +#endif +} + +static void parport_splink_dec_use_count(void) +{ +#ifdef MODULE + MOD_DEC_USE_COUNT; +#endif +} + +static struct parport_operations parport_splink_ops = +{ + parport_splink_write_data, + parport_splink_read_data, + + parport_splink_write_control, + parport_splink_read_control, + parport_splink_frob_control, + + parport_splink_read_status, + + parport_splink_enable_irq, + parport_splink_disable_irq, + + parport_splink_data_forward, + parport_splink_data_reverse, + + parport_splink_init_state, + parport_splink_save_state, + parport_splink_restore_state, + + parport_splink_inc_use_count, + parport_splink_dec_use_count, + + parport_ieee1284_epp_write_data, + parport_ieee1284_epp_read_data, + parport_ieee1284_epp_write_addr, + parport_ieee1284_epp_read_addr, + + parport_ieee1284_ecp_write_data, + parport_ieee1284_ecp_read_data, + parport_ieee1284_ecp_write_addr, + + parport_ieee1284_write_compat, + parport_ieee1284_read_nibble, + parport_ieee1284_read_byte, +}; + +/* --- Initialisation code -------------------------------- */ + +static struct parport *parport_splink_probe_port (unsigned long int base) +{ + struct parport_pc_private *priv; + struct parport_operations *ops; + struct parport *p; + + if (check_mem_region(base, 3)) { + printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base); + return NULL; + } + priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); + if (!priv) { + printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); + return NULL; + } + ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL); + if (!ops) { + printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", + base); + kfree (priv); + return NULL; + } + memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations)); + priv->ctr = 0xc; + priv->ctr_writable = 0xff; + + if (!(p = parport_register_port(base, PARPORT_IRQ_NONE, + PARPORT_DMA_NONE, ops))) { + printk (KERN_DEBUG "parport (0x%lx): registration failed!\n", + base); + kfree (priv); + kfree (ops); + return NULL; + } + + p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; + p->size = (p->modes & PARPORT_MODE_EPP)?8:3; + p->private_data = priv; + + parport_proc_register(p); + request_mem_region (p->base, 3, p->name); + + /* Done probing. Now put the port into a sensible start-up state. */ + parport_splink_write_data(p, 0); + parport_splink_data_forward (p); + + /* Now that we've told the sharing engine about the port, and + found out its characteristics, let the high-level drivers + know about it. */ + parport_announce_port (p); + + DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n", + base); + return p; +} + +static void parport_splink_unregister_port(struct parport *p) { + struct parport_pc_private *priv = p->private_data; + struct parport_operations *ops = p->ops; + + if (p->irq != PARPORT_IRQ_NONE) + free_irq(p->irq, p); + release_mem_region(p->base, 3); + parport_proc_unregister(p); + kfree (priv); + parport_unregister_port(p); + kfree (ops); +} + + +int parport_splink_init(void) +{ + int ret; + + DPRINTK(KERN_DEBUG "parport_splink init called\n"); + parport_splink_setup_interrupt(); + ret = !parport_splink_probe_port(SPLINK_ADDRESS); + + return ret; +} + +void parport_splink_cleanup(void) { + struct parport *p = parport_enumerate(), *tmp; + DPRINTK(KERN_DEBUG "parport_splink cleanup called\n"); + if (p->size) { + if (p->modes & PARPORT_MODE_PCSPP) { + while(p) { + tmp = p->next; + parport_splink_unregister_port(p); + p = tmp; + } + } + } +} + +MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>"); +MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port"); +MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port"); +MODULE_LICENSE("GPL"); + +module_init(parport_splink_init) +module_exit(parport_splink_cleanup) + diff --git a/package/linux/linux.config b/package/linux/linux.config index 5efd0e030a..31900bb6e9 100644 --- a/package/linux/linux.config +++ b/package/linux/linux.config @@ -1,5 +1,5 @@ # -# Automatically generated make config: don't edit +# Automatically generated by make menuconfig: don't edit # CONFIG_MIPS=y CONFIG_MIPS32=y @@ -181,10 +181,6 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -250,10 +246,6 @@ CONFIG_MTD_SFLASH=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# # CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set @@ -268,12 +260,8 @@ CONFIG_MTD_SFLASH=y # Parallel port support # CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_PC_PCMCIA is not set +# CONFIG_PARPORT_PC is not set +CONFIG_PARPORT_SPLINK=m # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set @@ -437,10 +425,6 @@ CONFIG_IP6_NF_TARGET_MARK=m # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set CONFIG_VLAN_8021Q=y - -# -# -# # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set @@ -525,20 +509,12 @@ CONFIG_NET_CLS_POLICE=y # SCSI support # CONFIG_SCSI=m - -# -# SCSI support type (disk, tape, CD-ROM) -# CONFIG_BLK_DEV_SD=m CONFIG_SD_EXTRA_DEVS=5 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set @@ -780,14 +756,6 @@ CONFIG_PRINTER=m # Joysticks # # CONFIG_INPUT_GAMEPORT is not set - -# -# Input core support is needed for gameports -# - -# -# Input core support is needed for joysticks -# # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set @@ -1016,24 +984,12 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_USB=m # CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set - -# -# USB Host Controller Drivers -# # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set CONFIG_USB_OHCI=m - -# -# USB Device Class drivers -# # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_BLUETOOTH is not set @@ -1050,15 +1006,7 @@ CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m - -# -# USB Human Interface Devices (HID) -# # CONFIG_USB_HID is not set - -# -# Input core support is needed for USB HID input layer or HIDBP support -# # CONFIG_USB_HIDINPUT is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_KBD is not set @@ -1067,47 +1015,23 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set - -# -# USB Imaging devices -# # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set - -# -# USB port drivers -# # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_TIGL is not set |