diff options
Diffstat (limited to 'package/utils/px5g/src/polarssl/bignum.h')
| -rw-r--r-- | package/utils/px5g/src/polarssl/bignum.h | 437 |
1 files changed, 437 insertions, 0 deletions
diff --git a/package/utils/px5g/src/polarssl/bignum.h b/package/utils/px5g/src/polarssl/bignum.h new file mode 100644 index 0000000000..c667303329 --- /dev/null +++ b/package/utils/px5g/src/polarssl/bignum.h @@ -0,0 +1,437 @@ +/** + * \file bignum.h + * + * Based on XySSL: Copyright (C) 2006-2008 Christophe Devine + * + * Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the names of PolarSSL or XySSL nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef POLARSSL_BIGNUM_H +#define POLARSSL_BIGNUM_H + +#include <stdio.h> + +#define POLARSSL_ERR_MPI_FILE_IO_ERROR -0x0002 +#define POLARSSL_ERR_MPI_BAD_INPUT_DATA -0x0004 +#define POLARSSL_ERR_MPI_INVALID_CHARACTER -0x0006 +#define POLARSSL_ERR_MPI_BUFFER_TOO_SMALL -0x0008 +#define POLARSSL_ERR_MPI_NEGATIVE_VALUE -0x000A +#define POLARSSL_ERR_MPI_DIVISION_BY_ZERO -0x000C +#define POLARSSL_ERR_MPI_NOT_ACCEPTABLE -0x000E + +#define MPI_CHK(f) if( ( ret = f ) != 0 ) goto cleanup + +/* + * Define the base integer type, architecture-wise + */ +#if defined(POLARSSL_HAVE_INT8) +typedef unsigned char t_int; +typedef unsigned short t_dbl; +#else +#if defined(POLARSSL_HAVE_INT16) +typedef unsigned short t_int; +typedef unsigned long t_dbl; +#else + typedef unsigned long t_int; + #if defined(_MSC_VER) && defined(_M_IX86) + typedef unsigned __int64 t_dbl; + #else + #if defined(__amd64__) || defined(__x86_64__) || \ + defined(__ppc64__) || defined(__powerpc64__) || \ + defined(__ia64__) || defined(__alpha__) + typedef unsigned int t_dbl __attribute__((mode(TI))); + #else + typedef unsigned long long t_dbl; + #endif + #endif +#endif +#endif + +/** + * \brief MPI structure + */ +typedef struct +{ + int s; /*!< integer sign */ + int n; /*!< total # of limbs */ + t_int *p; /*!< pointer to limbs */ +} +mpi; + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Initialize one or more mpi + */ +void mpi_init( mpi *X, ... ); + +/** + * \brief Unallocate one or more mpi + */ +void mpi_free( mpi *X, ... ); + +/** + * \brief Enlarge to the specified number of limbs + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_grow( mpi *X, int nblimbs ); + +/** + * \brief Copy the contents of Y into X + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_copy( mpi *X, mpi *Y ); + +/** + * \brief Swap the contents of X and Y + */ +void mpi_swap( mpi *X, mpi *Y ); + +/** + * \brief Set value from integer + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_lset( mpi *X, int z ); + +/** + * \brief Return the number of least significant bits + */ +int mpi_lsb( mpi *X ); + +/** + * \brief Return the number of most significant bits + */ +int mpi_msb( mpi *X ); + +/** + * \brief Return the total size in bytes + */ +int mpi_size( mpi *X ); + +/** + * \brief Import from an ASCII string + * + * \param X destination mpi + * \param radix input numeric base + * \param s null-terminated string buffer + * + * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code + */ +int mpi_read_string( mpi *X, int radix, char *s ); + +/** + * \brief Export into an ASCII string + * + * \param X source mpi + * \param radix output numeric base + * \param s string buffer + * \param slen string buffer size + * + * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code + * + * \note Call this function with *slen = 0 to obtain the + * minimum required buffer size in *slen. + */ +int mpi_write_string( mpi *X, int radix, char *s, int *slen ); + +/** + * \brief Read X from an opened file + * + * \param X destination mpi + * \param radix input numeric base + * \param fin input file handle + * + * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code + */ +int mpi_read_file( mpi *X, int radix, FILE *fin ); + +/** + * \brief Write X into an opened file, or stdout + * + * \param p prefix, can be NULL + * \param X source mpi + * \param radix output numeric base + * \param fout output file handle + * + * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code + * + * \note Set fout == NULL to print X on the console. + */ +int mpi_write_file( char *p, mpi *X, int radix, FILE *fout ); + +/** + * \brief Import X from unsigned binary data, big endian + * + * \param X destination mpi + * \param buf input buffer + * \param buflen input buffer size + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_read_binary( mpi *X, unsigned char *buf, int buflen ); + +/** + * \brief Export X into unsigned binary data, big endian + * + * \param X source mpi + * \param buf output buffer + * \param buflen output buffer size + * + * \return 0 if successful, + * POLARSSL_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough + * + * \note Call this function with *buflen = 0 to obtain the + * minimum required buffer size in *buflen. + */ +int mpi_write_binary( mpi *X, unsigned char *buf, int buflen ); + +/** + * \brief Left-shift: X <<= count + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_shift_l( mpi *X, int count ); + +/** + * \brief Right-shift: X >>= count + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_shift_r( mpi *X, int count ); + +/** + * \brief Compare unsigned values + * + * \return 1 if |X| is greater than |Y|, + * -1 if |X| is lesser than |Y| or + * 0 if |X| is equal to |Y| + */ +int mpi_cmp_abs( mpi *X, mpi *Y ); + +/** + * \brief Compare signed values + * + * \return 1 if X is greater than Y, + * -1 if X is lesser than Y or + * 0 if X is equal to Y + */ +int mpi_cmp_mpi( mpi *X, mpi *Y ); + +/** + * \brief Compare signed values + * + * \return 1 if X is greater than z, + * -1 if X is lesser than z or + * 0 if X is equal to z + */ +int mpi_cmp_int( mpi *X, int z ); + +/** + * \brief Unsigned addition: X = |A| + |B| + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_add_abs( mpi *X, mpi *A, mpi *B ); + +/** + * \brief Unsigned substraction: X = |A| - |B| + * + * \return 0 if successful, + * POLARSSL_ERR_MPI_NEGATIVE_VALUE if B is greater than A + */ +int mpi_sub_abs( mpi *X, mpi *A, mpi *B ); + +/** + * \brief Signed addition: X = A + B + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_add_mpi( mpi *X, mpi *A, mpi *B ); + +/** + * \brief Signed substraction: X = A - B + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_sub_mpi( mpi *X, mpi *A, mpi *B ); + +/** + * \brief Signed addition: X = A + b + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_add_int( mpi *X, mpi *A, int b ); + +/** + * \brief Signed substraction: X = A - b + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_sub_int( mpi *X, mpi *A, int b ); + +/** + * \brief Baseline multiplication: X = A * B + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_mul_mpi( mpi *X, mpi *A, mpi *B ); + +/** + * \brief Baseline multiplication: X = A * b + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_mul_int( mpi *X, mpi *A, t_int b ); + +/** + * \brief Division by mpi: A = Q * B + R + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0 + * + * \note Either Q or R can be NULL. + */ +int mpi_div_mpi( mpi *Q, mpi *R, mpi *A, mpi *B ); + +/** + * \brief Division by int: A = Q * b + R + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0 + * + * \note Either Q or R can be NULL. + */ +int mpi_div_int( mpi *Q, mpi *R, mpi *A, int b ); + +/** + * \brief Modulo: R = A mod B + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0 + */ +int mpi_mod_mpi( mpi *R, mpi *A, mpi *B ); + +/** + * \brief Modulo: r = A mod b + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0 + */ +int mpi_mod_int( t_int *r, mpi *A, int b ); + +/** + * \brief Sliding-window exponentiation: X = A^E mod N + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or even + * + * \note _RR is used to avoid re-computing R*R mod N across + * multiple calls, which speeds up things a bit. It can + * be set to NULL if the extra performance is unneeded. + */ +int mpi_exp_mod( mpi *X, mpi *A, mpi *E, mpi *N, mpi *_RR ); + +/** + * \brief Greatest common divisor: G = gcd(A, B) + * + * \return 0 if successful, + * 1 if memory allocation failed + */ +int mpi_gcd( mpi *G, mpi *A, mpi *B ); + +/** + * \brief Modular inverse: X = A^-1 mod N + * + * \return 0 if successful, + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or nil + * POLARSSL_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N + */ +int mpi_inv_mod( mpi *X, mpi *A, mpi *N ); + +/** + * \brief Miller-Rabin primality test + * + * \return 0 if successful (probably prime), + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_NOT_ACCEPTABLE if X is not prime + */ +int mpi_is_prime( mpi *X, int (*f_rng)(void *), void *p_rng ); + +/** + * \brief Prime number generation + * + * \param X destination mpi + * \param nbits required size of X in bits + * \param dh_flag if 1, then (X-1)/2 will be prime too + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \return 0 if successful (probably prime), + * 1 if memory allocation failed, + * POLARSSL_ERR_MPI_BAD_INPUT_DATA if nbits is < 3 + */ +int mpi_gen_prime( mpi *X, int nbits, int dh_flag, + int (*f_rng)(void *), void *p_rng ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mpi_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* bignum.h */ |