diff options
Diffstat (limited to 'package/rt2x00/src/rt2x00mac.c')
| -rw-r--r-- | package/rt2x00/src/rt2x00mac.c | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/package/rt2x00/src/rt2x00mac.c b/package/rt2x00/src/rt2x00mac.c new file mode 100644 index 0000000000..349353bee5 --- /dev/null +++ b/package/rt2x00/src/rt2x00mac.c @@ -0,0 +1,441 @@ +/* + Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic mac80211 routines. + Supported chipsets: RT2460, RT2560, RT2570, + rt2561, rt2561s, rt2661, rt2571W & rt2671. + */ + +/* + * Set enviroment defines for rt2x00.h + */ +#define DRV_NAME "rt2x00lib" + +#include <linux/netdevice.h> + +#include "rt2x00.h" +#include "rt2x00dev.h" + +static int rt2x00_tx_rts_cts(struct rt2x00_dev *rt2x00dev, + struct data_ring *ring, struct sk_buff *frag_skb, + struct ieee80211_tx_control *control) +{ + struct sk_buff *skb; + int size; + + if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + size = sizeof(struct ieee80211_cts); + else + size = sizeof(struct ieee80211_rts); + + skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); + if (!skb) { + WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); + return NETDEV_TX_BUSY; + } + + skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); + skb_put(skb, size); + + if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + ieee80211_ctstoself_get(rt2x00dev->hw, + frag_skb->data, frag_skb->len, control, + (struct ieee80211_cts*)(skb->data)); + else + ieee80211_rts_get(rt2x00dev->hw, + frag_skb->data, frag_skb->len, control, + (struct ieee80211_rts*)(skb->data)); + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); + return NETDEV_TX_BUSY; + } + + return NETDEV_TX_OK; +} + +int rt2x00lib_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr*)skb->data; + struct data_ring *ring; + u16 frame_control; + + /* + * Determine which ring to put packet on. + */ + ring = rt2x00_get_ring(rt2x00dev, control->queue); + if (unlikely(!ring)) { + ERROR(rt2x00dev, + "Attempt to send packet over invalid queue %d.\n" + "Please file bug report to %s.\n", + control->queue, DRV_PROJECT); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* + * If CTS/RTS is required. and this frame is not CTS or RTS, + * create and queue that frame first. But make sure we have + * at least enough entries available to send this CTS/RTS + * frame as well as the data frame. + */ + frame_control = le16_to_cpu(ieee80211hdr->frame_control); + if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS && + !is_cts_frame(frame_control) && !is_rts_frame(frame_control)) { + if (rt2x00_ring_free(ring) <= 1) + return NETDEV_TX_BUSY; + + if (rt2x00_tx_rts_cts(rt2x00dev, ring, skb, control)) + return NETDEV_TX_BUSY; + } + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) + return NETDEV_TX_BUSY; + + if (rt2x00dev->ops->lib->kick_tx_queue) + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + + return NETDEV_TX_OK; +} +EXPORT_SYMBOL_GPL(rt2x00lib_tx); + +int rt2x00lib_reset(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt2x00lib_disable_radio(rt2x00dev); + return rt2x00lib_enable_radio(rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00lib_reset); + +int rt2x00lib_open(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + int status; + + /* + * We must wait on the firmware before + * we can safely continue. + */ + status = rt2x00lib_load_firmware_wait(rt2x00dev); + if (status) + return status; + + /* + * Initialize the device. + */ + status = rt2x00lib_initialize(rt2x00dev); + if (status) + return status; + + /* + * Enable radio. + */ + status = rt2x00lib_enable_radio(rt2x00dev); + if (status) { + rt2x00lib_uninitialize(rt2x00dev); + return status; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_open); + +int rt2x00lib_stop(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + rt2x00lib_disable_radio(rt2x00dev); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_stop); + +int rt2x00lib_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + + /* + * We only support 1 non-monitor interface. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR && + is_interface_present(&rt2x00dev->interface)) + return -ENOBUFS; + + /* + * We support muliple monitor mode interfaces. + * All we need to do is increase the monitor_count. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) { + intf->monitor_count++; + } else { + intf->id = conf->if_id; + intf->type = conf->type; + if (conf->type == IEEE80211_IF_TYPE_AP) + memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); + intf->promisc = 0; + } + + /* + * If this is the first interface which is being added, + * we should write the MAC address to the device. + */ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, conf->mac_addr); + + /* + * Enable periodic link tuning if this is a non-monitor interface. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR) + rt2x00_start_link_tune(rt2x00dev); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_add_interface); + +void rt2x00lib_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + + /* + * We only support 1 non-monitor interface. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR && + !is_interface_present(&rt2x00dev->interface)) + return; + + /* + * We support muliple monitor mode interfaces. + * All we need to do is decrease the monitor_count. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) { + intf->monitor_count--; + } else if (intf->type == conf->type) { + intf->id = 0; + intf->type = -EINVAL; + memset(&intf->bssid, 0x00, ETH_ALEN); + intf->promisc = 0; + } + + /* + * When this is a non-monitor mode, stop the periodic link tuning. + */ + if (conf->type != IEEE80211_IF_TYPE_MNTR) + rt2x00_stop_link_tune(rt2x00dev); + + /* + * Check if we still have 1 non-monitor or a monitor + * interface enabled. In that case we should update the + * registers. + */ + if (is_monitor_present(&rt2x00dev->interface) ^ + is_interface_present(&rt2x00dev->interface)) { + if (is_interface_present(&rt2x00dev->interface)) + rt2x00lib_config_type(rt2x00dev, + rt2x00dev->interface.type); + else + rt2x00lib_config_type(rt2x00dev, + IEEE80211_IF_TYPE_MNTR); + } + + /* + * Check which interfaces have been disabled. + */ + if (!is_interface_present(&rt2x00dev->interface)) + __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags); + else if (!is_monitor_present(&rt2x00dev->interface)) + __clear_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags); +} +EXPORT_SYMBOL_GPL(rt2x00lib_remove_interface); + +int rt2x00lib_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Check if we need to disable the radio, + * if this is not the case, at least the RX must be disabled. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) { + if (!conf->radio_enabled) + rt2x00lib_disable_radio(rt2x00dev); + else + rt2x00lib_toggle_rx(rt2x00dev, 0); + } + + rt2x00lib_config_phymode(rt2x00dev, conf->phymode); + rt2x00lib_config_channel(rt2x00dev, conf->channel_val, + conf->channel, conf->freq, conf->power_level); + rt2x00lib_config_txpower(rt2x00dev, conf->power_level); + rt2x00lib_config_antenna(rt2x00dev, + conf->antenna_sel_tx, conf->antenna_sel_rx); + rt2x00dev->ops->lib->config_duration(rt2x00dev, + (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME), + conf->beacon_int); + + /* + * Reenable RX only if the radio should be on. + */ + if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2x00lib_toggle_rx(rt2x00dev, 1); + else if (conf->radio_enabled) + return rt2x00lib_enable_radio(rt2x00dev); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_config); + +int rt2x00lib_config_interface(struct ieee80211_hw *hw, int if_id, + struct ieee80211_if_conf *conf) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct interface *intf = &rt2x00dev->interface; + int status; + + /* + * Monitor mode does not need configuring. + * If the given type does not match the configured type, + * there has been a problem. + */ + if (conf->type == IEEE80211_IF_TYPE_MNTR) + return 0; + else if (conf->type != intf->type) + return -EINVAL; + + /* + * If the interface does not work in master mode, + * then the bssid value in the interface structure + * should now be set. + */ + if (conf->type != IEEE80211_IF_TYPE_AP) + memcpy(&intf->bssid, conf->bssid, ETH_ALEN); + + /* + * Enable configuration. + * For Monitor mode, promisc mode will be forced on. + */ + rt2x00lib_config_type(rt2x00dev, conf->type); + rt2x00lib_config_promisc(rt2x00dev, rt2x00dev->interface.promisc); + rt2x00dev->ops->lib->config_bssid(rt2x00dev, intf->bssid); + + /* + * We only need to initialize the beacon when master mode is enabled. + */ + if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon) + return 0; + + status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, + conf->beacon, conf->beacon_control); + if (status) + dev_kfree_skb(conf->beacon); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00lib_config_interface); + +void rt2x00lib_set_multicast_list(struct ieee80211_hw *hw, + unsigned short flags, int mc_count) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Promisc mode is forced on for Monitor interfaces. + */ + if (is_monitor_present(&rt2x00dev->interface)) + return; + + /* + * Check if the new state is different then the old state. + */ + if (test_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags) == + (flags & IFF_PROMISC)) + return; + + rt2x00dev->interface.promisc = (flags & IFF_PROMISC); + + /* + * Schedule the link tuner if this does not run + * automatically. The link tuner will be automatically + * switched off when it is not required. + */ + if (!work_pending(&rt2x00dev->link.work.work)) + queue_work(rt2x00dev->workqueue, &rt2x00dev->link.work.work); +} +EXPORT_SYMBOL_GPL(rt2x00lib_set_multicast_list); + +int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + unsigned int i; + + for (i = 0; i < hw->queues; i++) + memcpy(&stats->data[i], &rt2x00dev->tx[i].stats, + sizeof(rt2x00dev->tx[i].stats)); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_get_tx_stats); + +int rt2x00lib_conf_tx(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_ring *ring; + + ring = rt2x00_get_ring(rt2x00dev, queue); + if (unlikely(!ring)) + return -EINVAL; + + /* + * The passed variables are stored as real value ((2^n)-1). + * Ralink registers require to know the bit number 'n'. + */ + if (params->cw_min) + ring->tx_params.cw_min = fls(params->cw_min); + else + ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */ + + if (params->cw_max) + ring->tx_params.cw_max = fls(params->cw_max); + else + ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */ + + if (params->aifs) + ring->tx_params.aifs = params->aifs; + else + ring->tx_params.aifs = 2; + + INFO(rt2x00dev, + "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", + queue, ring->tx_params.cw_min, ring->tx_params.cw_max, + ring->tx_params.aifs); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_conf_tx); |