diff options
Diffstat (limited to 'package/rt2x00/src/rt2500pci.c')
| -rw-r--r-- | package/rt2x00/src/rt2500pci.c | 177 |
1 files changed, 90 insertions, 87 deletions
diff --git a/package/rt2x00/src/rt2500pci.c b/package/rt2x00/src/rt2500pci.c index 61d7e74e61..d71e3c32a4 100644 --- a/package/rt2x00/src/rt2500pci.c +++ b/package/rt2x00/src/rt2500pci.c @@ -42,6 +42,7 @@ #include <asm/io.h> #include "rt2x00.h" +#include "rt2x00lib.h" #include "rt2x00pci.h" #include "rt2500pci.h" @@ -368,6 +369,7 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, u32 rf2 = value; u32 rf3 = rt2x00dev->rf3; u32 rf4 = rt2x00dev->rf4; + u8 r70; if (rt2x00_rf(&rt2x00dev->chip, RF2525) || rt2x00_rf(&rt2x00dev->chip, RF2525E)) @@ -435,7 +437,9 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, /* * Channel 14 requires the Japan filter bit to be set. */ - rt2500pci_bbp_write(rt2x00dev, 70, (channel == 14) ? 0x4e : 0x46); + r70 = 0x46; + rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, channel == 14); + rt2500pci_bbp_write(rt2x00dev, 70, r70); msleep(1); @@ -692,8 +696,9 @@ static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev) /* * Link tuning */ -static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, int rssi) +static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) { + int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); u32 reg; u8 r17; @@ -722,7 +727,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, int rssi) */ if (rssi < -80 && rt2x00dev->link.count > 20) { if (r17 >= 0x41) { - r17 = rt2x00dev->link.curr_noise; + r17 = rt2x00dev->rx_status.noise; rt2500pci_bbp_write(rt2x00dev, 17, r17); } return; @@ -751,7 +756,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, int rssi) * to the dynamic tuning range. */ if (r17 >= 0x41) { - rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.curr_noise); + rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->rx_status.noise); return; } @@ -766,10 +771,10 @@ dynamic_cca_tune: if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) { rt2500pci_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.curr_noise = r17; + rt2x00dev->rx_status.noise = r17; } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) { rt2500pci_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.curr_noise = r17; + rt2x00dev->rx_status.noise = r17; } } @@ -898,7 +903,16 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) return -EBUSY; rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - rt2x00pci_register_write(rt2x00dev, PCICSR, 0x000003b8); + + rt2x00pci_register_read(rt2x00dev, PCICSR, ®); + rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); + rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); + rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); + rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); + rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); + rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); + rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); + rt2x00pci_register_write(rt2x00dev, PCICSR, reg); rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); @@ -1079,11 +1093,35 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); } -static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) +static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, int enabled) { u32 reg; /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (enabled) { + rt2x00pci_register_read(rt2x00dev, CSR7, ®); + rt2x00pci_register_write(rt2x00dev, CSR7, reg); + } + + /* + * Only toggle the interrupts bits we are going to use. + * Non-checked interrupt bits are disabled by default. + */ + rt2x00pci_register_read(rt2x00dev, CSR8, ®); + rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, !enabled); + rt2x00_set_field32(®, CSR8_TXDONE_TXRING, !enabled); + rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, !enabled); + rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, !enabled); + rt2x00_set_field32(®, CSR8_RXDONE, !enabled); + rt2x00pci_register_write(rt2x00dev, CSR8, reg); +} + +static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + /* * Initialize all registers. */ if (rt2500pci_init_rings(rt2x00dev) || @@ -1094,21 +1132,9 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) } /* - * Clear interrupts. - */ - rt2x00pci_register_read(rt2x00dev, CSR7, ®); - rt2x00pci_register_write(rt2x00dev, CSR7, reg); - - /* * Enable interrupts. */ - rt2x00pci_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, 0); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 0); - rt2x00_set_field32(®, CSR8_RXDONE, 0); - rt2x00pci_register_write(rt2x00dev, CSR8, reg); + rt2500pci_toggle_irq(rt2x00dev, 1); /* * Enable LED @@ -1144,13 +1170,7 @@ static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Disable interrupts. */ - rt2x00pci_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, 1); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 1); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 1); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 1); - rt2x00_set_field32(®, CSR8_RXDONE, 1); - rt2x00pci_register_write(rt2x00dev, CSR8, reg); + rt2500pci_toggle_irq(rt2x00dev, 0); } static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -1300,61 +1320,37 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, int queue) } /* - * Interrupt functions. + * RX control handlers */ -static void rt2500pci_rxdone(struct rt2x00_dev *rt2x00dev) +static int rt2500pci_fill_rxdone(struct data_entry *entry, + int *signal, int *rssi, int *ofdm) { - struct data_ring *ring = rt2x00dev->rx; - struct data_entry *entry; - struct data_desc *rxd; + struct data_desc *rxd = entry->priv; u32 word0; u32 word2; - int signal; - int rssi; - int ofdm; - u16 size; - - while (1) { - entry = rt2x00_get_data_entry(ring); - rxd = entry->priv; - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 2, &word2); - - if (rt2x00_get_field32(word0, RXD_W0_OWNER_NIC)) - break; - /* - * TODO: Don't we need to keep statistics - * updated about events like CRC and physical errors? - */ - if (rt2x00_get_field32(word0, RXD_W0_CRC) || - rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - goto skip_entry; + rt2x00_desc_read(rxd, 0, &word0); + rt2x00_desc_read(rxd, 2, &word2); - /* - * Obtain the status about this packet. - */ - size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - rssi = rt2x00_get_field32(word2, RXD_W2_RSSI); - ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - - /* - * Send the packet to upper layer. - */ - rt2x00lib_rxdone(entry, entry->data_addr, size, - signal, rssi, ofdm); + /* + * TODO: Don't we need to keep statistics + * updated about these errors? + */ + if (rt2x00_get_field32(word0, RXD_W0_CRC) || + rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) + return -EINVAL; -skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { - rt2x00_set_field32(&word0, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word0); - } + *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); + *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - + entry->ring->rt2x00dev->rssi_offset; + *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - rt2x00_ring_index_inc(ring); - } + return rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); } +/* + * Interrupt functions. + */ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) { struct data_ring *ring = rt2x00_get_ring(rt2x00dev, queue); @@ -1435,7 +1431,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) * 2 - Rx ring done interrupt. */ if (rt2x00_get_field32(reg, CSR7_RXDONE)) - rt2500pci_rxdone(rt2x00dev); + rt2x00pci_rxdone(rt2x00dev); /* * 3 - Atim ring transmit done interrupt. @@ -1466,6 +1462,7 @@ static int rt2500pci_alloc_eeprom(struct rt2x00_dev *rt2x00dev) struct eeprom_93cx6 eeprom; u32 reg; u16 word; + u8 *mac; /* * Allocate the eeprom memory, check the eeprom width @@ -1493,6 +1490,12 @@ static int rt2500pci_alloc_eeprom(struct rt2x00_dev *rt2x00dev) /* * Start validation of the data that has been read. */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); + } + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); @@ -1518,7 +1521,7 @@ static int rt2500pci_alloc_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - MAX_RX_SSI); + DEFAULT_RSSI_OFFSET); rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); } @@ -1586,7 +1589,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Read the RSSI <-> dBm offset information. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->hw->max_rssi = + rt2x00dev->rssi_offset = rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); return 0; @@ -1660,16 +1663,16 @@ static void rt2500pci_init_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_WEP_INCLUDE_IV | IEEE80211_HW_DATA_NULLFUNC_ACK | IEEE80211_HW_NO_TKIP_WMM_HWACCEL | - IEEE80211_HW_MONITOR_DURING_OPER; + IEEE80211_HW_MONITOR_DURING_OPER | + IEEE80211_HW_NO_PROBE_FILTERING; rt2x00dev->hw->extra_tx_headroom = 0; rt2x00dev->hw->max_rssi = MAX_RX_SSI; rt2x00dev->hw->max_noise = MAX_RX_NOISE; rt2x00dev->hw->queues = 2; - /* - * This device supports ATIM - */ - __set_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags); + SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); /* * Set device specific, but channel independent RF values. @@ -1692,7 +1695,6 @@ static void rt2500pci_init_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize hw_mode information. */ - spec->mac_addr = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); spec->num_modes = 2; spec->num_rates = 12; spec->num_channels = 14; @@ -1738,6 +1740,11 @@ static int rt2500pci_init_hw(struct rt2x00_dev *rt2x00dev) */ rt2500pci_init_hw_mode(rt2x00dev); + /* + * This device supports ATIM + */ + __set_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags); + return 0; } @@ -1812,8 +1819,6 @@ static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) static const struct ieee80211_ops rt2500pci_mac80211_ops = { .tx = rt2x00lib_tx, .reset = rt2x00lib_reset, - .open = rt2x00lib_open, - .stop = rt2x00lib_stop, .add_interface = rt2x00lib_add_interface, .remove_interface = rt2x00lib_remove_interface, .config = rt2x00lib_config, @@ -1842,6 +1847,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .write_tx_desc = rt2500pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt2500pci_kick_tx_queue, + .fill_rxdone = rt2500pci_fill_rxdone, .config_type = rt2500pci_config_type, .config_phymode = rt2500pci_config_phymode, .config_channel = rt2500pci_config_channel, @@ -1892,14 +1898,11 @@ static struct pci_driver rt2500pci_driver = { static int __init rt2500pci_init(void) { - printk(KERN_INFO "Loading module: %s - %s by %s.\n", - DRV_NAME, DRV_VERSION, DRV_PROJECT); return pci_register_driver(&rt2500pci_driver); } static void __exit rt2500pci_exit(void) { - printk(KERN_INFO "Unloading module: %s.\n", DRV_NAME); pci_unregister_driver(&rt2500pci_driver); } |