diff options
Diffstat (limited to 'package/mac80211')
30 files changed, 83 insertions, 923 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 806c5cdfda..ae41c58a2b 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -1317,11 +1317,6 @@ MAKE_OPTS:= \ CONFIG_ATH6KL= \ CONFIG_MAC80211_RC_MINSTREL_HT=y \ MADWIFI= \ - CONFIG_B44= \ - CONFIG_ATL1= \ - CONFIG_ATL2= \ - CONFIG_ATL1E= \ - CONFIG_ATL1C= \ CONFIG_BRCMUTIL=$(if $(CONFIG_PACKAGE_kmod-brcmutil),m) \ CONFIG_BRCMSMAC=$(if $(CONFIG_PACKAGE_kmod-brcmsmac),m) \ CONFIG_BRCMFMAC=$(if $(CONFIG_PACKAGE_kmod-brcmfmac),m) \ @@ -1337,6 +1332,39 @@ ifeq ($(CONFIG_PACKAGE_kmod-libertas-sd)$(CONFIG_PACKAGE_kmod-libertas-usb)$(CON MAKE_OPTS += CONFIG_COMPAT_KFIFO= endif +DISABLE_CONFIG = \ + COMPAT_BLUETOOTH.* \ + COMPAT_CORDIC \ + COMPAT_CRC8 \ + COMPAT_MDIO \ + COMPAT_NETWORK_MODULES \ + COMPAT_NET_USB_MODULES \ + COMPAT_VAR_MODULES \ + COMPAT_RFKILL \ + COMPAT_RFKILL_.* \ + COMPAT_STAGING \ + \ + B43_PCMCIA \ + B43_SDIO \ + BCMA.* \ + COMPAT_ATH9K_RATE_CONTROL \ + HID_GENERIC \ + MAC80211_RC_PID \ + PCMCIA \ + RFKILL_BACKPORT.* \ + SSB \ + SSB_SDIOHOST \ + \ + ATH5K_PCI \ + ATH9K_BTCOEX_SUPPORT \ + B43_PHY_N \ + B43_PHY_HT \ + B43_BCMA.* \ + MAC80211_MESH \ + RT2X00_LIB_PCI \ + RT2X00_LIB_USB + + define Build/Prepare rm -rf $(PKG_BUILD_DIR) mkdir -p $(PKG_BUILD_DIR) @@ -1346,15 +1374,23 @@ define Build/Prepare $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE) - rm -rf $(PKG_BUILD_DIR)/include/linux/ssb - rm -rf $(PKG_BUILD_DIR)/include/linux/bcma - rm -rf $(PKG_BUILD_DIR)/include/net/bluetooth/ - rm -f $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h - rm -f $(PKG_BUILD_DIR)/include/linux/wl12xx.h - rm -f $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h - rm -f $(PKG_BUILD_DIR)/include/net/ieee80211.h + rm -rf \ + $(PKG_BUILD_DIR)/include/linux/ssb \ + $(PKG_BUILD_DIR)/include/linux/bcma \ + $(PKG_BUILD_DIR)/include/net/bluetooth + + rm -f \ + $(PKG_BUILD_DIR)/include/linux/cordic.h \ + $(PKG_BUILD_DIR)/include/linux/crc8.h \ + $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \ + $(PKG_BUILD_DIR)/include/linux/wl12xx.h \ + $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \ + $(PKG_BUILD_DIR)/include/net/ieee80211.h + echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version $(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt + + sed -i $(foreach config,$(DISABLE_CONFIG),-e 's,^\([ ]*export *CONFIG_$(config)=\),# \1,') $(PKG_BUILD_DIR)/config.mk endef ifneq ($(CONFIG_PACKAGE_kmod-cfg80211)$(CONFIG_PACKAGE_kmod-lib80211),) diff --git a/package/mac80211/patches/000-disable_ethernet.patch b/package/mac80211/patches/000-disable_ethernet.patch deleted file mode 100644 index 08f908b10f..0000000000 --- a/package/mac80211/patches/000-disable_ethernet.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -45,9 +45,6 @@ obj-$(CONFIG_COMPAT_WIRELESS_MODULES) += - - obj-$(CONFIG_COMPAT_NET_USB_MODULES) += drivers/net/usb/ - --obj-$(CONFIG_COMPAT_NETWORK_MODULES) += drivers/net/ethernet/atheros/ --obj-$(CONFIG_COMPAT_NETWORK_MODULES) += drivers/net/ethernet/broadcom/ -- - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/ssb/ - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/bcma/ - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/misc/eeprom/ diff --git a/package/mac80211/patches/001-disable_b44.patch b/package/mac80211/patches/001-disable_b44.patch deleted file mode 100644 index 389dac1aed..0000000000 --- a/package/mac80211/patches/001-disable_b44.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -377,8 +377,8 @@ export CONFIG_B43_BCMA_EXTRA=y - - export CONFIG_P54_PCI=m - --export CONFIG_B44=m --export CONFIG_B44_PCI=y -+# export CONFIG_B44=m -+# export CONFIG_B44_PCI=y - - export CONFIG_RTL8180=m - diff --git a/package/mac80211/patches/001-disable_rfkill.patch b/package/mac80211/patches/001-disable_rfkill.patch new file mode 100644 index 0000000000..7af485f5bf --- /dev/null +++ b/package/mac80211/patches/001-disable_rfkill.patch @@ -0,0 +1,13 @@ +--- a/include/linux/rfkill.h ++++ b/include/linux/rfkill.h +@@ -3,6 +3,10 @@ + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) + ++#undef CONFIG_RFKILL ++#undef CONFIG_RFKILL_LEDS ++#undef CONFIG_RFKILL_MODULE ++ + #include_next <linux/rfkill.h> + + #else diff --git a/package/mac80211/patches/002-disable_rfkill.patch b/package/mac80211/patches/002-disable_rfkill.patch deleted file mode 100644 index 685006bd58..0000000000 --- a/package/mac80211/patches/002-disable_rfkill.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -78,7 +78,7 @@ endif # build check - endif # kernel Makefile check - - # These both are needed by 802.11 and bluetooth so enable -- export CONFIG_COMPAT_RFKILL=y -+# export CONFIG_COMPAT_RFKILL=y - - ifeq ($(CONFIG_MAC80211),y) - $(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular") -@@ -690,10 +690,10 @@ endif #CONFIG_COMPAT_KERNEL_2_6_27 - # We need the backported rfkill module on kernel < 2.6.31. - # In more recent kernel versions use the in kernel rfkill module. - ifdef CONFIG_COMPAT_KERNEL_2_6_31 --export CONFIG_RFKILL_BACKPORT=m -+#export CONFIG_RFKILL_BACKPORT=m - ifdef CONFIG_LEDS_TRIGGERS --export CONFIG_RFKILL_BACKPORT_LEDS=y -+#export CONFIG_RFKILL_BACKPORT_LEDS=y - endif #CONFIG_LEDS_TRIGGERS --export CONFIG_RFKILL_BACKPORT_INPUT=y -+#export CONFIG_RFKILL_BACKPORT_INPUT=y - endif #CONFIG_COMPAT_KERNEL_2_6_31 - ---- a/include/linux/rfkill.h -+++ b/include/linux/rfkill.h -@@ -3,6 +3,10 @@ - - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) - -+#undef CONFIG_RFKILL -+#undef CONFIG_RFKILL_LEDS -+#undef CONFIG_RFKILL_MODULE -+ - #include_next <linux/rfkill.h> - - #else diff --git a/package/mac80211/patches/002-disable_ssb_build.patch b/package/mac80211/patches/002-disable_ssb_build.patch new file mode 100644 index 0000000000..0f6ece1e6a --- /dev/null +++ b/package/mac80211/patches/002-disable_ssb_build.patch @@ -0,0 +1,22 @@ +--- a/config.mk ++++ b/config.mk +@@ -353,7 +353,8 @@ export CONFIG_IPW2200_QOS=y + # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface + endif #CONFIG_WIRELESS_EXT + +-ifdef CONFIG_SSB ++# disabled ++ifdef __CONFIG_SSB + # Sonics Silicon Backplane + export CONFIG_SSB_SPROM=y + +@@ -366,7 +367,7 @@ endif #CONFIG_PCMCIA + # export CONFIG_SSB_DEBUG=y + export CONFIG_SSB_DRIVER_PCICORE=y + export CONFIG_B43_SSB=y +-endif #CONFIG_SSB ++endif #__CONFIG_SSB + + export CONFIG_BCMA=m + export CONFIG_BCMA_BLOCKIO=y + diff --git a/package/mac80211/patches/003-disable_bt.patch b/package/mac80211/patches/003-disable_bt.patch deleted file mode 100644 index b56ccbdc6a..0000000000 --- a/package/mac80211/patches/003-disable_bt.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -100,9 +100,9 @@ ifndef CONFIG_COMPAT_KERNEL_2_6_27 - ifeq ($(CONFIG_BT),y) - # we'll ignore compiling bluetooth - else -- export CONFIG_COMPAT_BLUETOOTH=y -- export CONFIG_COMPAT_BLUETOOTH_MODULES=m -- export CONFIG_HID_GENERIC=m -+# export CONFIG_COMPAT_BLUETOOTH=y -+# export CONFIG_COMPAT_BLUETOOTH_MODULES=m -+# export CONFIG_HID_GENERIC=m - endif - endif #CONFIG_COMPAT_KERNEL_2_6_27 - diff --git a/package/mac80211/patches/070-disable_codel.patch b/package/mac80211/patches/003-disable_codel.patch index 0d6d749110..0d6d749110 100644 --- a/package/mac80211/patches/070-disable_codel.patch +++ b/package/mac80211/patches/003-disable_codel.patch diff --git a/package/mac80211/patches/005-disable_ssb_build.patch b/package/mac80211/patches/005-disable_ssb_build.patch deleted file mode 100644 index d42a6121d1..0000000000 --- a/package/mac80211/patches/005-disable_ssb_build.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -45,7 +45,6 @@ obj-$(CONFIG_COMPAT_WIRELESS_MODULES) += - - obj-$(CONFIG_COMPAT_NET_USB_MODULES) += drivers/net/usb/ - --obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/ssb/ - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/bcma/ - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/misc/eeprom/ - ---- a/config.mk -+++ b/config.mk -@@ -3,7 +3,7 @@ ifeq ($(wildcard $(KLIB_BUILD)/.config), - export CONFIG_PCI=y - export CONFIG_USB=y - export CONFIG_PCMCIA=y -- export CONFIG_SSB=m -+# export CONFIG_SSB=m - else - include $(KLIB_BUILD)/.config - endif -@@ -353,7 +353,8 @@ export CONFIG_IPW2200_QOS=y - # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface - endif #CONFIG_WIRELESS_EXT - --ifdef CONFIG_SSB -+# disabled -+ifdef __CONFIG_SSB - # Sonics Silicon Backplane - export CONFIG_SSB_SPROM=y - -@@ -366,7 +367,7 @@ endif #CONFIG_PCMCIA - # export CONFIG_SSB_DEBUG=y - export CONFIG_SSB_DRIVER_PCICORE=y - export CONFIG_B43_SSB=y --endif #CONFIG_SSB -+endif #__CONFIG_SSB - - export CONFIG_BCMA=m - export CONFIG_BCMA_BLOCKIO=y -@@ -580,7 +581,7 @@ endif #CONFIG_SPI_MASTER end of SPI driv - - ifdef CONFIG_MMC - --export CONFIG_SSB_SDIOHOST=y -+# export CONFIG_SSB_SDIOHOST=y - export CONFIG_B43_SDIO=y - - ifdef CONFIG_CRC7 diff --git a/package/mac80211/patches/006-disable_bcma_build.patch b/package/mac80211/patches/006-disable_bcma_build.patch deleted file mode 100644 index da11ad4556..0000000000 --- a/package/mac80211/patches/006-disable_bcma_build.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/Makefile -+++ b/Makefile -@@ -45,7 +45,6 @@ obj-$(CONFIG_COMPAT_WIRELESS_MODULES) += - - obj-$(CONFIG_COMPAT_NET_USB_MODULES) += drivers/net/usb/ - --obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/bcma/ - obj-$(CONFIG_COMPAT_VAR_MODULES) += drivers/misc/eeprom/ - - ifeq ($(CONFIG_STAGING_EXCLUDE_BUILD),) ---- a/config.mk -+++ b/config.mk -@@ -369,12 +369,12 @@ export CONFIG_SSB_DRIVER_PCICORE=y - export CONFIG_B43_SSB=y - endif #__CONFIG_SSB - --export CONFIG_BCMA=m --export CONFIG_BCMA_BLOCKIO=y --export CONFIG_BCMA_HOST_PCI=y -+# export CONFIG_BCMA=m -+# export CONFIG_BCMA_BLOCKIO=y -+# export CONFIG_BCMA_HOST_PCI=y - # export CONFIG_BCMA_DEBUG=y --export CONFIG_B43_BCMA=y --export CONFIG_B43_BCMA_EXTRA=y -+# export CONFIG_B43_BCMA=y -+# export CONFIG_B43_BCMA_EXTRA=y - - export CONFIG_P54_PCI=m - diff --git a/package/mac80211/patches/007-remove_misc_drivers.patch b/package/mac80211/patches/007-remove_misc_drivers.patch deleted file mode 100644 index 9e7f651665..0000000000 --- a/package/mac80211/patches/007-remove_misc_drivers.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -241,7 +241,7 @@ $(warning "WARNING: CONFIG_CFG80211_WEXT - endif #CONFIG_WIRELESS_EXT - - ifdef CONFIG_STAGING --export CONFIG_COMPAT_STAGING=m -+# export CONFIG_COMPAT_STAGING=m - endif #CONFIG_STAGING - - # mac80211 test driver -@@ -406,12 +406,12 @@ endif #CONFIG_CRC_ITU_T - export CONFIG_MWL8K=m - - # Ethernet drivers go here --export CONFIG_ATL1=m --export CONFIG_ATL2=m --export CONFIG_ATL1E=m -+# export CONFIG_ATL1=m -+# export CONFIG_ATL2=m -+# export CONFIG_ATL1E=m - ifndef CONFIG_COMPAT_KERNEL_2_6_28 --export CONFIG_ATL1C=m --export CONFIG_ALX=m -+# export CONFIG_ATL1C=m -+# export CONFIG_ALX=m - endif #CONFIG_COMPAT_KERNEL_2_6_28 - - ifdef CONFIG_WIRELESS_EXT -@@ -472,21 +472,21 @@ endif #CONFIG_COMPAT_KERNEL_2_6_29 - # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER - # it also requires new RNDIS_HOST and CDC_ETHER modules which we add - ifdef CONFIG_COMPAT_KERNEL_2_6_29 --export CONFIG_USB_COMPAT_USBNET=n --export CONFIG_USB_NET_COMPAT_RNDIS_HOST=n --export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n --export CONFIG_USB_NET_COMPAT_CDCETHER=n -+# export CONFIG_USB_COMPAT_USBNET=n -+# export CONFIG_USB_NET_COMPAT_RNDIS_HOST=n -+# export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n -+# export CONFIG_USB_NET_COMPAT_CDCETHER=n - else #CONFIG_COMPAT_KERNEL_2_6_29 --export CONFIG_USB_COMPAT_USBNET=m -+# export CONFIG_USB_COMPAT_USBNET=m - ifdef CONFIG_USB_NET_CDCETHER --export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m --export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m -+# export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -+# export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m - endif #CONFIG_USB_NET_CDCETHER - ifdef CONFIG_USB_NET_CDCETHER_MODULE --export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m --export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m -+# export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -+# export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m - endif #CONFIG_USB_NET_CDCETHER --export CONFIG_USB_NET_COMPAT_CDCETHER=m -+# export CONFIG_USB_NET_COMPAT_CDCETHER=m - endif #CONFIG_COMPAT_KERNEL_2_6_29 - - diff --git a/package/mac80211/patches/008-disable_mesh.patch b/package/mac80211/patches/008-disable_mesh.patch deleted file mode 100644 index d5a0ac8e6e..0000000000 --- a/package/mac80211/patches/008-disable_mesh.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -177,7 +177,7 @@ export CONFIG_MAC80211_LEDS=y - endif #CONFIG_LEDS_TRIGGERS - - # enable mesh networking too --export CONFIG_MAC80211_MESH=y -+# export CONFIG_MAC80211_MESH=y - - export CONFIG_CFG80211=m - export CONFIG_CFG80211_DEFAULT_PS=y diff --git a/package/mac80211/patches/009-remove_mac80211_module_dependence.patch b/package/mac80211/patches/009-remove_mac80211_module_dependence.patch deleted file mode 100644 index 2bc46c4ed6..0000000000 --- a/package/mac80211/patches/009-remove_mac80211_module_dependence.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -54,7 +54,7 @@ endif - ifeq ($(KERNEL_VERSION),2) - ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_26SUBLEVEL) -ge 27 -a $(KERNEL_26SUBLEVEL) -le 31 && echo yes),yes) - ifeq ($(CONFIG_MAC80211),) --$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.") -+# $(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.") - endif - endif - endif diff --git a/package/mac80211/patches/021-add_include_for_bcma.patch b/package/mac80211/patches/010-add_include_for_bcma.patch index e2e856eb05..e2e856eb05 100644 --- a/package/mac80211/patches/021-add_include_for_bcma.patch +++ b/package/mac80211/patches/010-add_include_for_bcma.patch diff --git a/package/mac80211/patches/010-no_pcmcia.patch b/package/mac80211/patches/010-no_pcmcia.patch deleted file mode 100644 index af6a7545be..0000000000 --- a/package/mac80211/patches/010-no_pcmcia.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -2,7 +2,7 @@ ifeq ($(wildcard $(KLIB_BUILD)/.config), - # These will be ignored by compat autoconf - export CONFIG_PCI=y - export CONFIG_USB=y -- export CONFIG_PCMCIA=y -+# export CONFIG_PCMCIA=y - # export CONFIG_SSB=m - else - include $(KLIB_BUILD)/.config -@@ -304,7 +304,7 @@ export CONFIG_B43=m - export CONFIG_B43_HWRNG=y - export CONFIG_B43_PCI_AUTOSELECT=y - ifdef CONFIG_PCMCIA --export CONFIG_B43_PCMCIA=y -+# export CONFIG_B43_PCMCIA=y - endif #CONFIG_PCMCIA - ifdef CONFIG_MAC80211_LEDS - export CONFIG_B43_LEDS=y diff --git a/package/mac80211/patches/011-no_sdio.patch b/package/mac80211/patches/011-no_sdio.patch deleted file mode 100644 index 4d364e0454..0000000000 --- a/package/mac80211/patches/011-no_sdio.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -582,7 +582,7 @@ endif #CONFIG_SPI_MASTER end of SPI driv - ifdef CONFIG_MMC - - # export CONFIG_SSB_SDIOHOST=y --export CONFIG_B43_SDIO=y -+# export CONFIG_B43_SDIO=y - - ifdef CONFIG_CRC7 - ifdef CONFIG_WL12XX_PLATFORM_DATA diff --git a/package/mac80211/patches/013-disable_b43_nphy.patch b/package/mac80211/patches/013-disable_b43_nphy.patch deleted file mode 100644 index ba37bad951..0000000000 --- a/package/mac80211/patches/013-disable_b43_nphy.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -310,8 +310,8 @@ ifdef CONFIG_MAC80211_LEDS - export CONFIG_B43_LEDS=y - endif #CONFIG_MAC80211_LEDS - export CONFIG_B43_PHY_LP=y --export CONFIG_B43_PHY_N=y --export CONFIG_B43_PHY_HT=y -+# export CONFIG_B43_PHY_N=y -+# export CONFIG_B43_PHY_HT=y - # export CONFIG_B43_PHY_LCN=y - # export CONFIG_B43_DEBUG=y - diff --git a/package/mac80211/patches/015-remove-rt2x00-options.patch b/package/mac80211/patches/015-remove-rt2x00-options.patch deleted file mode 100644 index 66c0d67a5f..0000000000 --- a/package/mac80211/patches/015-remove-rt2x00-options.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -385,7 +385,7 @@ export CONFIG_RTL8180=m - - export CONFIG_ADM8211=m - --export CONFIG_RT2X00_LIB_PCI=m -+# export CONFIG_RT2X00_LIB_PCI=m - export CONFIG_RT2400PCI=m - export CONFIG_RT2500PCI=m - ifdef CONFIG_CRC_CCITT -@@ -528,7 +528,7 @@ export CONFIG_RT2800USB_RT35XX=y - export CONFIG_RT2800USB_RT53XX=y - export CONFIG_RT2800USB_UNKNOWN=y - endif #CONFIG_CRC_CCITT --export CONFIG_RT2X00_LIB_USB=m -+# export CONFIG_RT2X00_LIB_USB=m - NEED_RT2X00=y - # RT73USB requires firmware - ifdef CONFIG_CRC_ITU_T diff --git a/package/mac80211/patches/016-remove_pid_algo.patch b/package/mac80211/patches/016-remove_pid_algo.patch deleted file mode 100644 index 7180a63cef..0000000000 --- a/package/mac80211/patches/016-remove_pid_algo.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -169,7 +169,7 @@ export CONFIG_MAC80211_RC_DEFAULT_MINSTR - # This is the one used by our compat-drivers net/mac80211/rate.c - # in case you have and old kernel which is overriding this to pid. - export CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht --export CONFIG_MAC80211_RC_PID=y -+# export CONFIG_MAC80211_RC_PID=y - export CONFIG_MAC80211_RC_MINSTREL=y - export CONFIG_MAC80211_RC_MINSTREL_HT=y - ifdef CONFIG_LEDS_TRIGGERS diff --git a/package/mac80211/patches/017-remove_ath9k_rc.patch b/package/mac80211/patches/017-remove_ath9k_rc.patch deleted file mode 100644 index 99b520911b..0000000000 --- a/package/mac80211/patches/017-remove_ath9k_rc.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -265,7 +265,7 @@ export CONFIG_ATH9K_COMMON=m - # as default once we get minstrel properly tested and blessed by - # our systems engineering team. CCK rates also need to be used - # for long range considerations. --export CONFIG_COMPAT_ATH9K_RATE_CONTROL=y -+# export CONFIG_COMPAT_ATH9K_RATE_CONTROL=y - - export CONFIG_ATH9K_BTCOEX_SUPPORT=y - diff --git a/package/mac80211/patches/018-revert_printk_va_format.patch b/package/mac80211/patches/018-revert_printk_va_format.patch deleted file mode 100644 index fa2237c950..0000000000 --- a/package/mac80211/patches/018-revert_printk_va_format.patch +++ /dev/null @@ -1,188 +0,0 @@ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -341,83 +341,59 @@ static int b43_ratelimit(struct b43_wl * - - void b43info(struct b43_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (b43_modparam_verbose < B43_VERBOSITY_INFO) - return; - if (!b43_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_INFO "b43-%s: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_INFO "b43-%s: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - void b43err(struct b43_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (b43_modparam_verbose < B43_VERBOSITY_ERROR) - return; - if (!b43_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_ERR "b43-%s ERROR: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_ERR "b43-%s ERROR: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - void b43warn(struct b43_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (b43_modparam_verbose < B43_VERBOSITY_WARN) - return; - if (!b43_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_WARNING "b43-%s warning: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_WARNING "b43-%s warning: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - void b43dbg(struct b43_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_DEBUG "b43-%s debug: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_DEBUG "b43-%s debug: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - ---- a/drivers/net/wireless/b43legacy/main.c -+++ b/drivers/net/wireless/b43legacy/main.c -@@ -179,75 +179,52 @@ static int b43legacy_ratelimit(struct b4 - - void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (!b43legacy_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_INFO "b43legacy-%s: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_INFO "b43legacy-%s: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (!b43legacy_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_ERR "b43legacy-%s ERROR: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_ERR "b43legacy-%s ERROR: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - if (!b43legacy_ratelimit(wl)) - return; -- - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_WARNING "b43legacy-%s warning: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_WARNING "b43legacy-%s warning: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - - #if B43legacy_DEBUG - void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...) - { -- struct va_format vaf; - va_list args; - - va_start(args, fmt); -- -- vaf.fmt = fmt; -- vaf.va = &args; -- -- printk(KERN_DEBUG "b43legacy-%s debug: %pV", -- (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); -- -+ printk(KERN_DEBUG "b43legacy-%s debug: ", -+ (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); -+ vprintk(fmt, args); - va_end(args); - } - #endif /* DEBUG */ diff --git a/package/mac80211/patches/019-remove_ath5k_pci_option.patch b/package/mac80211/patches/019-remove_ath5k_pci_option.patch deleted file mode 100644 index d0149d39c1..0000000000 --- a/package/mac80211/patches/019-remove_ath5k_pci_option.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -282,7 +282,7 @@ endif #CONFIG_COMPAT_KERNEL_2_6_27 - # PCI Drivers - ifdef CONFIG_PCI - --export CONFIG_ATH5K_PCI=y -+# export CONFIG_ATH5K_PCI=y - export CONFIG_ATH9K_PCI=y - - export CONFIG_IWLWIFI=m diff --git a/package/mac80211/patches/030-disable_tty_set_termios.patch b/package/mac80211/patches/020-disable_tty_set_termios.patch index fc5d4d63fb..fc5d4d63fb 100644 --- a/package/mac80211/patches/030-disable_tty_set_termios.patch +++ b/package/mac80211/patches/020-disable_tty_set_termios.patch diff --git a/package/mac80211/patches/022-remove_crc8_and_cordic.patch b/package/mac80211/patches/022-remove_crc8_and_cordic.patch deleted file mode 100644 index 13ad2c895c..0000000000 --- a/package/mac80211/patches/022-remove_crc8_and_cordic.patch +++ /dev/null @@ -1,166 +0,0 @@ ---- a/compat/Makefile -+++ b/compat/Makefile -@@ -47,8 +47,6 @@ compat-$(CONFIG_COMPAT_KERNEL_3_3) += \ - compat-$(CONFIG_COMPAT_KERNEL_3_4) += compat-3.4.o - compat-$(CONFIG_COMPAT_KERNEL_3_7) += compat-3.7.o - --compat-$(CONFIG_COMPAT_CORDIC) += cordic.o --compat-$(CONFIG_COMPAT_CRC8) += crc8.o - - ifndef CONFIG_64BIT - ifndef CONFIG_GENERIC_ATOMIC64 ---- a/include/linux/cordic.h -+++ /dev/null -@@ -1,48 +0,0 @@ --/* -- * Copyright (c) 2011 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ --#ifndef __CORDIC_H_ --#define __CORDIC_H_ -- --#include <linux/types.h> -- --/** -- * struct cordic_iq - i/q coordinate. -- * -- * @i: real part of coordinate (in phase). -- * @q: imaginary part of coordinate (quadrature). -- */ --struct cordic_iq { -- s32 i; -- s32 q; --}; -- --/** -- * cordic_calc_iq() - calculates the i/q coordinate for given angle. -- * -- * @theta: angle in degrees for which i/q coordinate is to be calculated. -- * @coord: function output parameter holding the i/q coordinate. -- * -- * The function calculates the i/q coordinate for a given angle using -- * cordic algorithm. The coordinate consists of a real (i) and an -- * imaginary (q) part. The real part is essentially the cosine of the -- * angle and the imaginary part is the sine of the angle. The returned -- * values are scaled by 2^16 for precision. The range for theta is -- * for -180 degrees to +180 degrees. Passed values outside this range are -- * converted before doing the actual calculation. -- */ --struct cordic_iq cordic_calc_iq(s32 theta); -- --#endif /* __CORDIC_H_ */ ---- a/include/linux/crc8.h -+++ /dev/null -@@ -1,101 +0,0 @@ --/* -- * Copyright (c) 2011 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ --#ifndef __CRC8_H_ --#define __CRC8_H_ -- --#include <linux/types.h> -- --/* see usage of this value in crc8() description */ --#define CRC8_INIT_VALUE 0xFF -- --/* -- * Return value of crc8() indicating valid message+crc. This is true -- * if a CRC is inverted before transmission. The CRC computed over the -- * whole received bitstream is _table[x], where x is the bit pattern -- * of the modification (almost always 0xff). -- */ --#define CRC8_GOOD_VALUE(_table) (_table[0xFF]) -- --/* required table size for crc8 algorithm */ --#define CRC8_TABLE_SIZE 256 -- --/* helper macro assuring right table size is used */ --#define DECLARE_CRC8_TABLE(_table) \ -- static u8 _table[CRC8_TABLE_SIZE] -- --/** -- * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. -- * -- * @table: table to be filled. -- * @polynomial: polynomial for which table is to be filled. -- * -- * This function fills the provided table according the polynomial provided for -- * regular bit order (lsb first). Polynomials in CRC algorithms are typically -- * represented as shown below. -- * -- * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 -- * -- * For lsb first direction x^7 maps to the lsb. So the polynomial is as below. -- * -- * - lsb first: poly = 10101011(1) = 0xAB -- */ --void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); -- --/** -- * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. -- * -- * @table: table to be filled. -- * @polynomial: polynomial for which table is to be filled. -- * -- * This function fills the provided table according the polynomial provided for -- * reverse bit order (msb first). Polynomials in CRC algorithms are typically -- * represented as shown below. -- * -- * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 -- * -- * For msb first direction x^7 maps to the msb. So the polynomial is as below. -- * -- * - msb first: poly = (1)11010101 = 0xD5 -- */ --void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); -- --/** -- * crc8() - calculate a crc8 over the given input data. -- * -- * @table: crc table used for calculation. -- * @pdata: pointer to data buffer. -- * @nbytes: number of bytes in data buffer. -- * @crc: previous returned crc8 value. -- * -- * The CRC8 is calculated using the polynomial given in crc8_populate_msb() -- * or crc8_populate_lsb(). -- * -- * The caller provides the initial value (either %CRC8_INIT_VALUE -- * or the previous returned value) to allow for processing of -- * discontiguous blocks of data. When generating the CRC the -- * caller is responsible for complementing the final return value -- * and inserting it into the byte stream. When validating a byte -- * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE -- * indicates the byte stream data can be considered valid. -- * -- * Reference: -- * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993 -- * Williams, Ross N., ross<at>ross.net -- * (see URL http://www.ross.net/crc/download/crc_v3.txt). -- */ --u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc); -- --#endif /* __CRC8_H_ */ diff --git a/package/mac80211/patches/023-ath9k_disable_btcoex.patch b/package/mac80211/patches/023-ath9k_disable_btcoex.patch deleted file mode 100644 index 37ae2d5d74..0000000000 --- a/package/mac80211/patches/023-ath9k_disable_btcoex.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/config.mk -+++ b/config.mk -@@ -267,7 +267,7 @@ export CONFIG_ATH9K_COMMON=m - # for long range considerations. - # export CONFIG_COMPAT_ATH9K_RATE_CONTROL=y - --export CONFIG_ATH9K_BTCOEX_SUPPORT=y -+# export CONFIG_ATH9K_BTCOEX_SUPPORT=y - - # WIL6210 requires MSI only available >= 2.6.30 - ifndef CONFIG_COMPAT_KERNEL_2_6_30 diff --git a/package/mac80211/patches/071-add_codel_ifdef.patch b/package/mac80211/patches/030-add_codel_ifdef.patch index 86b415170b..86b415170b 100644 --- a/package/mac80211/patches/071-add_codel_ifdef.patch +++ b/package/mac80211/patches/030-add_codel_ifdef.patch diff --git a/package/mac80211/patches/050-compat_firmware.patch b/package/mac80211/patches/050-compat_firmware.patch deleted file mode 100644 index e4b91a3167..0000000000 --- a/package/mac80211/patches/050-compat_firmware.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/compat/Makefile -+++ b/compat/Makefile -@@ -1,7 +1,10 @@ - obj-m += compat.o - #compat-objs := - --obj-$(CONFIG_COMPAT_FIRMWARE_CLASS) += compat_firmware_class.o -+ifdef CONFIG_COMPAT_FIRMWARE_CLASS -+ compat-y += compat_firmware_class.o -+endif -+ - obj-$(CONFIG_COMPAT_NET_SCH_CODEL) += sch_codel.o - - sch_fq_codel-y = sch_fq_codel_core.o flow_dissector.o ---- a/compat/compat_firmware_class.c -+++ b/compat/compat_firmware_class.c -@@ -741,19 +741,16 @@ compat_request_firmware_nowait( - return 0; - } - --static int __init firmware_class_init(void) -+int __init firmware_class_init(void) - { - return class_register(&firmware_class); - } - --static void __exit firmware_class_exit(void) -+void __exit firmware_class_exit(void) - { - class_unregister(&firmware_class); - } - --fs_initcall(firmware_class_init); --module_exit(firmware_class_exit); -- - EXPORT_SYMBOL_GPL(release_firmware); - EXPORT_SYMBOL_GPL(request_firmware); - EXPORT_SYMBOL_GPL(request_firmware_nowait); ---- a/compat/main.c -+++ b/compat/main.c -@@ -47,6 +47,17 @@ void compat_dependency_symbol(void) - EXPORT_SYMBOL_GPL(compat_dependency_symbol); - - -+#if defined(CONFIG_FW_LOADER) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) -+int __init firmware_class_init(void); -+void __exit firmware_class_exit(void); -+#else -+static inline int firmware_class_init(void) -+{ -+ return 0; -+} -+static inline void firmware_class_exit(void) {} -+#endif -+ - static int __init compat_init(void) - { - compat_pm_qos_power_init(); -@@ -63,7 +74,8 @@ static int __init compat_init(void) - printk(KERN_INFO "compat.git: " - COMPAT_BASE_TREE "\n"); - -- return 0; -+ firmware_class_init(); -+ return 0; - } - module_init(compat_init); - -@@ -72,7 +84,8 @@ static void __exit compat_exit(void) - compat_pm_qos_power_deinit(); - compat_system_workqueue_destroy(); - -- return; -+ firmware_class_exit(); -+ return; - } - module_exit(compat_exit); - diff --git a/package/mac80211/patches/060-compat_add_module_pci_driver.patch b/package/mac80211/patches/060-compat_add_module_pci_driver.patch deleted file mode 100644 index 277ca3d379..0000000000 --- a/package/mac80211/patches/060-compat_add_module_pci_driver.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/include/linux/compat-3.4.h -+++ b/include/linux/compat-3.4.h -@@ -112,6 +112,19 @@ static inline void eth_hw_addr_random(st - module_driver(__pci_driver, pci_register_driver, \ - pci_unregister_driver) - -+/* source include/linux/pci.h */ -+/** -+ * module_pci_driver() - Helper macro for registering a PCI driver -+ * @__pci_driver: pci_driver struct -+ * -+ * Helper macro for PCI drivers which do not do anything special in module -+ * init/exit. This eliminates a lot of boilerplate. Each module may only -+ * use this macro once, and calling it replaces module_init() and module_exit() -+ */ -+#define module_pci_driver(__pci_driver) \ -+ module_driver(__pci_driver, pci_register_driver, \ -+ pci_unregister_driver) -+ - #endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) */ - - #endif /* LINUX_5_4_COMPAT_H */ diff --git a/package/mac80211/patches/100-disable_pcmcia_compat.patch b/package/mac80211/patches/100-disable_pcmcia_compat.patch deleted file mode 100644 index 60927555bb..0000000000 --- a/package/mac80211/patches/100-disable_pcmcia_compat.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/compat/compat-2.6.28.c -+++ b/compat/compat-2.6.28.c -@@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(usb_poison_urb); - #endif - #endif /* CONFIG_USB */ - --#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+#if 0 - - #include <pcmcia/ds.h> - struct pcmcia_cfg_mem { ---- a/compat/compat-2.6.33.c -+++ b/compat/compat-2.6.33.c -@@ -10,7 +10,7 @@ - - #include <linux/compat.h> - --#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE) -+#if 0 - - /** - * pccard_loop_tuple() - loop over tuples in the CIS -@@ -72,7 +72,7 @@ next_entry: - EXPORT_SYMBOL_GPL(pccard_loop_tuple); - /* Source: drivers/pcmcia/cistpl.c */ - --#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+#if 0 - - struct pcmcia_loop_mem { - struct pcmcia_device *p_dev; ---- a/include/linux/compat-2.6.28.h -+++ b/include/linux/compat-2.6.28.h -@@ -49,7 +49,7 @@ typedef u32 phys_addr_t; - }) - #endif /* From include/asm-generic/bug.h */ - --#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+#if 0 - - #include <pcmcia/cs_types.h> - #include <pcmcia/cs.h> ---- a/include/linux/compat-2.6.33.h -+++ b/include/linux/compat-2.6.33.h -@@ -7,7 +7,7 @@ - - #include <linux/skbuff.h> - #include <linux/pci.h> --#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE) -+#if 0 - #include <pcmcia/cs_types.h> - #include <pcmcia/cistpl.h> - #include <pcmcia/ds.h> -@@ -82,9 +82,9 @@ static inline struct sk_buff *netdev_all - return skb; - } - --#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE) -+#if 0 - --#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+#if 0 - - #define pcmcia_request_window(a, b, c) pcmcia_request_window(&a, b, c) - diff --git a/package/mac80211/patches/110-disable_usb_compat.patch b/package/mac80211/patches/110-disable_usb_compat.patch deleted file mode 100644 index d6287fd045..0000000000 --- a/package/mac80211/patches/110-disable_usb_compat.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/compat/compat-2.6.28.c -+++ b/compat/compat-2.6.28.c -@@ -165,7 +165,7 @@ EXPORT_SYMBOL_GPL(pcmcia_loop_config); - - #endif /* CONFIG_PCMCIA */ - --#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -+#if 0 - - void usb_unpoison_urb(struct urb *urb) - { ---- a/compat/compat-2.6.29.c -+++ b/compat/compat-2.6.29.c -@@ -49,7 +49,7 @@ void netdev_attach_ops(struct net_device - EXPORT_SYMBOL_GPL(netdev_attach_ops); - - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) --#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -+#if 0 - /** - * usb_unpoison_anchored_urbs - let an anchor be used successfully again - * @anchor: anchor the requests are bound to ---- a/include/linux/compat-2.6.28.h -+++ b/include/linux/compat-2.6.28.h -@@ -74,7 +74,7 @@ int pcmcia_loop_config(struct pcmcia_dev - /* USB anchors were added as of 2.6.23 */ - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) - --#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -+#if 0 - #if 0 - extern void usb_poison_urb(struct urb *urb); - #endif ---- a/config.mk -+++ b/config.mk -@@ -510,7 +510,7 @@ endif #CONFIG_COMPAT_KERNEL_2_6_29 - # This activates a threading fix for usb urb. - # this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351 - # This fix will be included in some stable releases. --export CONFIG_COMPAT_USB_URB_THREAD_FIX=y -+# export CONFIG_COMPAT_USB_URB_THREAD_FIX=y - - export CONFIG_ATH9K_HTC=m - # export CONFIG_ATH9K_HTC_DEBUGFS=y |