diff options
Diffstat (limited to 'package/mac80211/patches/860-brcmsmac-backport.patch')
| -rw-r--r-- | package/mac80211/patches/860-brcmsmac-backport.patch | 4465 |
1 files changed, 0 insertions, 4465 deletions
diff --git a/package/mac80211/patches/860-brcmsmac-backport.patch b/package/mac80211/patches/860-brcmsmac-backport.patch deleted file mode 100644 index af3ae073e2..0000000000 --- a/package/mac80211/patches/860-brcmsmac-backport.patch +++ /dev/null @@ -1,4465 +0,0 @@ ---- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile -+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile -@@ -39,10 +39,7 @@ BRCMSMAC_OFILES := \ - phy/phytbl_lcn.o \ - phy/phytbl_n.o \ - phy/phy_qmath.o \ -- otp.o \ -- srom.o \ - dma.o \ -- nicpci.o \ - brcms_trace_events.o - - MODULEPFX := brcmsmac ---- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -@@ -22,7 +22,6 @@ - #include <linux/kernel.h> - #include <linux/printk.h> - #include <linux/delay.h> --#include <linux/pci.h> - - #include <defs.h> - #include <chipcommon.h> -@@ -32,8 +31,6 @@ - #include "types.h" - #include "pub.h" - #include "pmu.h" --#include "srom.h" --#include "nicpci.h" - #include "aiutils.h" - - /* slow_clk_ctl */ -@@ -324,7 +321,6 @@ - #define IS_SIM(chippkg) \ - ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) - --#define PCI(sih) (ai_get_buscoretype(sih) == PCI_CORE_ID) - #define PCIE(sih) (ai_get_buscoretype(sih) == PCIE_CORE_ID) - - #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID)) -@@ -457,36 +453,9 @@ struct aidmp { - u32 componentid3; /* 0xffc */ - }; - --/* return true if PCIE capability exists in the pci config space */ --static bool ai_ispcie(struct si_info *sii) --{ -- u8 cap_ptr; -- -- cap_ptr = -- pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL, -- NULL); -- if (!cap_ptr) -- return false; -- -- return true; --} -- --static bool ai_buscore_prep(struct si_info *sii) --{ -- /* kludge to enable the clock on the 4306 which lacks a slowclock */ -- if (!ai_ispcie(sii)) -- ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); -- return true; --} -- - static bool - ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) - { -- struct bcma_device *pci = NULL; -- struct bcma_device *pcie = NULL; -- struct bcma_device *core; -- -- - /* no cores found, bail out */ - if (cc->bus->nr_cores == 0) - return false; -@@ -495,8 +464,7 @@ ai_buscore_setup(struct si_info *sii, st - sii->pub.ccrev = cc->id.rev; - - /* get chipcommon chipstatus */ -- if (ai_get_ccrev(&sii->pub) >= 11) -- sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); -+ sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); - - /* get chipcommon capabilites */ - sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities)); -@@ -509,64 +477,18 @@ ai_buscore_setup(struct si_info *sii, st - } - - /* figure out buscore */ -- list_for_each_entry(core, &cc->bus->cores, list) { -- uint cid, crev; -- -- cid = core->id.id; -- crev = core->id.rev; -- -- if (cid == PCI_CORE_ID) { -- pci = core; -- } else if (cid == PCIE_CORE_ID) { -- pcie = core; -- } -- } -- -- if (pci && pcie) { -- if (ai_ispcie(sii)) -- pci = NULL; -- else -- pcie = NULL; -- } -- if (pci) { -- sii->buscore = pci; -- } else if (pcie) { -- sii->buscore = pcie; -- } -- -- /* fixup necessary chip/core configurations */ -- if (!sii->pch) { -- sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core); -- if (sii->pch == NULL) -- return false; -- } -- if (ai_pci_fixcfg(&sii->pub)) -- return false; -+ sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0); - - return true; - } - --/* -- * get boardtype and boardrev -- */ --static __used void ai_nvram_process(struct si_info *sii) --{ -- uint w = 0; -- -- /* do a pci config read to get subsystem id and subvendor id */ -- pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w); -- -- sii->pub.boardvendor = w & 0xffff; -- sii->pub.boardtype = (w >> 16) & 0xffff; --} -- - static struct si_info *ai_doattach(struct si_info *sii, - struct bcma_bus *pbus) - { - struct si_pub *sih = &sii->pub; - u32 w, savewin; - struct bcma_device *cc; -- uint socitype; -+ struct ssb_sprom *sprom = &pbus->sprom; - - savewin = 0; - -@@ -576,38 +498,15 @@ static struct si_info *ai_doattach(struc - /* switch to Chipcommon core */ - cc = pbus->drv_cc.core; - -- /* bus/core/clk setup for register access */ -- if (!ai_buscore_prep(sii)) -- return NULL; -+ sih->chip = pbus->chipinfo.id; -+ sih->chiprev = pbus->chipinfo.rev; -+ sih->chippkg = pbus->chipinfo.pkg; -+ sih->boardvendor = pbus->boardinfo.vendor; -+ sih->boardtype = pbus->boardinfo.type; - -- /* -- * ChipID recognition. -- * We assume we can read chipid at offset 0 from the regs arg. -- * If we add other chiptypes (or if we need to support old sdio -- * hosts w/o chipcommon), some way of recognizing them needs to -- * be added here. -- */ -- w = bcma_read32(cc, CHIPCREGOFFS(chipid)); -- socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT; -- /* Might as wll fill in chip id rev & pkg */ -- sih->chip = w & CID_ID_MASK; -- sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT; -- sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT; -- -- /* scan for cores */ -- if (socitype != SOCI_AI) -- return NULL; -- -- SI_MSG("Found chip type AI (0x%08x)\n", w); - if (!ai_buscore_setup(sii, cc)) - goto exit; - -- /* Init nvram from sprom/otp if they exist */ -- if (srom_var_init(&sii->pub)) -- goto exit; -- -- ai_nvram_process(sii); -- - /* === NVRAM, clock is ready === */ - bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0); - bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0); -@@ -620,15 +519,13 @@ static struct si_info *ai_doattach(struc - } - - /* setup the GPIO based LED powersave register */ -- w = getintvar(sih, BRCMS_SROM_LEDDC); -+ w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | -+ (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT); - if (w == 0) - w = DEFAULT_GPIOTIMERVAL; - ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval), - ~0, w); - -- if (PCIE(sih)) -- pcicore_attach(sii->pch, SI_DOATTACH); -- - if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) { - /* - * enable 12 mA drive strenth for 43224 and -@@ -662,9 +559,6 @@ static struct si_info *ai_doattach(struc - return sii; - - exit: -- if (sii->pch) -- pcicore_deinit(sii->pch); -- sii->pch = NULL; - - return NULL; - } -@@ -703,11 +597,6 @@ void ai_detach(struct si_pub *sih) - if (sii == NULL) - return; - -- if (sii->pch) -- pcicore_deinit(sii->pch); -- sii->pch = NULL; -- -- srom_free_vars(sih); - kfree(sii); - } - -@@ -758,21 +647,7 @@ uint ai_cc_reg(struct si_pub *sih, uint - /* return the slow clock source - LPO, XTAL, or PCI */ - static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) - { -- struct si_info *sii; -- u32 val; -- -- sii = (struct si_info *)sih; -- if (ai_get_ccrev(&sii->pub) < 6) { -- pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, -- &val); -- if (val & PCI_CFG_GPIO_SCS) -- return SCC_SS_PCI; -- return SCC_SS_XTAL; -- } else if (ai_get_ccrev(&sii->pub) < 10) { -- return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & -- SCC_SS_MASK; -- } else /* Insta-clock */ -- return SCC_SS_XTAL; -+ return SCC_SS_XTAL; - } - - /* -@@ -782,36 +657,12 @@ static uint ai_slowclk_src(struct si_pub - static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq, - struct bcma_device *cc) - { -- u32 slowclk; - uint div; - -- slowclk = ai_slowclk_src(sih, cc); -- if (ai_get_ccrev(sih) < 6) { -- if (slowclk == SCC_SS_PCI) -- return max_freq ? (PCIMAXFREQ / 64) -- : (PCIMINFREQ / 64); -- else -- return max_freq ? (XTALMAXFREQ / 32) -- : (XTALMINFREQ / 32); -- } else if (ai_get_ccrev(sih) < 10) { -- div = 4 * -- (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & -- SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); -- if (slowclk == SCC_SS_LPO) -- return max_freq ? LPOMAXFREQ : LPOMINFREQ; -- else if (slowclk == SCC_SS_XTAL) -- return max_freq ? (XTALMAXFREQ / div) -- : (XTALMINFREQ / div); -- else if (slowclk == SCC_SS_PCI) -- return max_freq ? (PCIMAXFREQ / div) -- : (PCIMINFREQ / div); -- } else { -- /* Chipc rev 10 is InstaClock */ -- div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); -- div = 4 * ((div >> SYCC_CD_SHIFT) + 1); -- return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); -- } -- return 0; -+ /* Chipc rev 10 is InstaClock */ -+ div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); -+ div = 4 * ((div >> SYCC_CD_SHIFT) + 1); -+ return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); - } - - static void -@@ -834,8 +685,7 @@ ai_clkctl_setdelay(struct si_pub *sih, s - - /* Starting with 4318 it is ILP that is used for the delays */ - slowmaxfreq = -- ai_slowclk_freq(sih, -- (ai_get_ccrev(sih) >= 10) ? false : true, cc); -+ ai_slowclk_freq(sih, false, cc); - - pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; - fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; -@@ -857,9 +707,8 @@ void ai_clkctl_init(struct si_pub *sih) - return; - - /* set all Instaclk chip ILP to 1 MHz */ -- if (ai_get_ccrev(sih) >= 10) -- bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, -- (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); -+ bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, -+ (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); - - ai_clkctl_setdelay(sih, cc); - } -@@ -894,140 +743,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si - return fpdelay; - } - --/* turn primary xtal and/or pll off/on */ --int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) --{ -- struct si_info *sii; -- u32 in, out, outen; -- -- sii = (struct si_info *)sih; -- -- /* pcie core doesn't have any mapping to control the xtal pu */ -- if (PCIE(sih)) -- return -1; -- -- pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in); -- pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out); -- pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen); -- -- /* -- * Avoid glitching the clock if GPRS is already using it. -- * We can't actually read the state of the PLLPD so we infer it -- * by the value of XTAL_PU which *is* readable via gpioin. -- */ -- if (on && (in & PCI_CFG_GPIO_XTAL)) -- return 0; -- -- if (what & XTAL) -- outen |= PCI_CFG_GPIO_XTAL; -- if (what & PLL) -- outen |= PCI_CFG_GPIO_PLL; -- -- if (on) { -- /* turn primary xtal on */ -- if (what & XTAL) { -- out |= PCI_CFG_GPIO_XTAL; -- if (what & PLL) -- out |= PCI_CFG_GPIO_PLL; -- pci_write_config_dword(sii->pcibus, -- PCI_GPIO_OUT, out); -- pci_write_config_dword(sii->pcibus, -- PCI_GPIO_OUTEN, outen); -- udelay(XTAL_ON_DELAY); -- } -- -- /* turn pll on */ -- if (what & PLL) { -- out &= ~PCI_CFG_GPIO_PLL; -- pci_write_config_dword(sii->pcibus, -- PCI_GPIO_OUT, out); -- mdelay(2); -- } -- } else { -- if (what & XTAL) -- out &= ~PCI_CFG_GPIO_XTAL; -- if (what & PLL) -- out |= PCI_CFG_GPIO_PLL; -- pci_write_config_dword(sii->pcibus, -- PCI_GPIO_OUT, out); -- pci_write_config_dword(sii->pcibus, -- PCI_GPIO_OUTEN, outen); -- } -- -- return 0; --} -- --/* clk control mechanism through chipcommon, no policy checking */ --static bool _ai_clkctl_cc(struct si_info *sii, uint mode) --{ -- struct bcma_device *cc; -- u32 scc; -- -- /* chipcommon cores prior to rev6 don't support dynamic clock control */ -- if (ai_get_ccrev(&sii->pub) < 6) -- return false; -- -- cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); -- -- if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) && -- (ai_get_ccrev(&sii->pub) < 20)) -- return mode == CLK_FAST; -- -- switch (mode) { -- case CLK_FAST: /* FORCEHT, fast (pll) clock */ -- if (ai_get_ccrev(&sii->pub) < 10) { -- /* -- * don't forget to force xtal back -- * on before we clear SCC_DYN_XTAL.. -- */ -- ai_clkctl_xtal(&sii->pub, XTAL, ON); -- bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl), -- (SCC_XC | SCC_FS | SCC_IP), SCC_IP); -- } else if (ai_get_ccrev(&sii->pub) < 20) { -- bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR); -- } else { -- bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT); -- } -- -- /* wait for the PLL */ -- if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { -- u32 htavail = CCS_HTAVAIL; -- SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) & -- htavail) == 0), PMU_MAX_TRANSITION_DLY); -- } else { -- udelay(PLL_DELAY); -- } -- break; -- -- case CLK_DYNAMIC: /* enable dynamic clock control */ -- if (ai_get_ccrev(&sii->pub) < 10) { -- scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)); -- scc &= ~(SCC_FS | SCC_IP | SCC_XC); -- if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) -- scc |= SCC_XC; -- bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc); -- -- /* -- * for dynamic control, we have to -- * release our xtal_pu "force on" -- */ -- if (scc & SCC_XC) -- ai_clkctl_xtal(&sii->pub, XTAL, OFF); -- } else if (ai_get_ccrev(&sii->pub) < 20) { -- /* Instaclock */ -- bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR); -- } else { -- bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT); -- } -- break; -- -- default: -- break; -- } -- -- return mode == CLK_FAST; --} -- - /* - * clock control policy function throught chipcommon - * -@@ -1036,133 +751,53 @@ static bool _ai_clkctl_cc(struct si_info - * this is a wrapper over the next internal function - * to allow flexible policy settings for outside caller - */ --bool ai_clkctl_cc(struct si_pub *sih, uint mode) -+bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode) - { - struct si_info *sii; -+ struct bcma_device *cc; - - sii = (struct si_info *)sih; - -- /* chipcommon cores prior to rev6 don't support dynamic clock control */ -- if (ai_get_ccrev(sih) < 6) -- return false; -- - if (PCI_FORCEHT(sih)) -- return mode == CLK_FAST; -+ return mode == BCMA_CLKMODE_FAST; - -- return _ai_clkctl_cc(sii, mode); -+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_set_clockmode(cc, mode); -+ return mode == BCMA_CLKMODE_FAST; - } - - void ai_pci_up(struct si_pub *sih) - { - struct si_info *sii; -+ struct bcma_device *cc; - - sii = (struct si_info *)sih; - -- if (PCI_FORCEHT(sih)) -- _ai_clkctl_cc(sii, CLK_FAST); -+ if (PCI_FORCEHT(sih)) { -+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST); -+ } - - if (PCIE(sih)) -- pcicore_up(sii->pch, SI_PCIUP); -- --} -- --/* Unconfigure and/or apply various WARs when system is going to sleep mode */ --void ai_pci_sleep(struct si_pub *sih) --{ -- struct si_info *sii; -- -- sii = (struct si_info *)sih; -- -- pcicore_sleep(sii->pch); -+ bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true); - } - - /* Unconfigure and/or apply various WARs when going down */ - void ai_pci_down(struct si_pub *sih) - { - struct si_info *sii; -+ struct bcma_device *cc; - - sii = (struct si_info *)sih; - - /* release FORCEHT since chip is going to "down" state */ -- if (PCI_FORCEHT(sih)) -- _ai_clkctl_cc(sii, CLK_DYNAMIC); -- -- pcicore_down(sii->pch, SI_PCIDOWN); --} -- --/* -- * Configure the pci core for pci client (NIC) action -- * coremask is the bitvec of cores by index to be enabled. -- */ --void ai_pci_setup(struct si_pub *sih, uint coremask) --{ -- struct si_info *sii; -- u32 w; -- -- sii = (struct si_info *)sih; -- -- /* -- * Enable sb->pci interrupts. Assume -- * PCI rev 2.3 support was added in pci core rev 6 and things changed.. -- */ -- if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) { -- /* pci config write to set this core bit in PCIIntMask */ -- pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); -- w |= (coremask << PCI_SBIM_SHIFT); -- pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); -- } -- -- if (PCI(sih)) { -- pcicore_pci_setup(sii->pch); -+ if (PCI_FORCEHT(sih)) { -+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC); - } --} -- --/* -- * Fixup SROMless PCI device's configuration. -- * The current core may be changed upon return. -- */ --int ai_pci_fixcfg(struct si_pub *sih) --{ -- struct si_info *sii = (struct si_info *)sih; -- -- /* Fixup PI in SROM shadow area to enable the correct PCI core access */ -- /* check 'pi' is correct and fix it if not */ -- pcicore_fixcfg(sii->pch); -- pcicore_hwup(sii->pch); -- return 0; --} -- --/* mask&set gpiocontrol bits */ --u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority) --{ -- uint regoff; -- -- regoff = offsetof(struct chipcregs, gpiocontrol); -- return ai_cc_reg(sih, regoff, mask, val); --} -- --void ai_chipcontrl_epa4331(struct si_pub *sih, bool on) --{ -- struct bcma_device *cc; -- u32 val; -- -- cc = ai_findcore(sih, CC_CORE_ID, 0); - -- if (on) { -- if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb) -- /* Ext PA Controls for 4331 12x9 Package */ -- bcma_set32(cc, CHIPCREGOFFS(chipcontrol), -- CCTRL4331_EXTPA_EN | -- CCTRL4331_EXTPA_ON_GPIO2_5); -- else -- /* Ext PA Controls for 4331 12x12 Package */ -- bcma_set32(cc, CHIPCREGOFFS(chipcontrol), -- CCTRL4331_EXTPA_EN); -- } else { -- val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5); -- bcma_mask32(cc, CHIPCREGOFFS(chipcontrol), -- ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5)); -- } -+ if (PCIE(sih)) -+ bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false); - } - - /* Enable BT-COEX & Ex-PA for 4313 */ -@@ -1184,6 +819,9 @@ bool ai_deviceremoved(struct si_pub *sih - - sii = (struct si_info *)sih; - -+ if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI) -+ return false; -+ - pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w); - if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) - return true; -@@ -1191,45 +829,6 @@ bool ai_deviceremoved(struct si_pub *sih - return false; - } - --bool ai_is_sprom_available(struct si_pub *sih) --{ -- struct si_info *sii = (struct si_info *)sih; -- -- if (ai_get_ccrev(sih) >= 31) { -- struct bcma_device *cc; -- u32 sromctrl; -- -- if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0) -- return false; -- -- cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); -- sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol)); -- return sromctrl & SRC_PRESENT; -- } -- -- switch (ai_get_chip_id(sih)) { -- case BCM4313_CHIP_ID: -- return (sii->chipst & CST4313_SPROM_PRESENT) != 0; -- default: -- return true; -- } --} -- --bool ai_is_otp_disabled(struct si_pub *sih) --{ -- struct si_info *sii = (struct si_info *)sih; -- -- switch (ai_get_chip_id(sih)) { -- case BCM4313_CHIP_ID: -- return (sii->chipst & CST4313_OTP_PRESENT) == 0; -- /* These chips always have their OTP on */ -- case BCM43224_CHIP_ID: -- case BCM43225_CHIP_ID: -- default: -- return false; -- } --} -- - uint ai_get_buscoretype(struct si_pub *sih) - { - struct si_info *sii = (struct si_info *)sih; ---- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h -+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h -@@ -113,10 +113,6 @@ - #define XTAL 0x1 /* primary crystal oscillator (2050) */ - #define PLL 0x2 /* main chip pll */ - --/* clkctl clk mode */ --#define CLK_FAST 0 /* force fast (pll) clock */ --#define CLK_DYNAMIC 2 /* enable dynamic clock control */ -- - /* GPIO usage priorities */ - #define GPIO_DRV_PRIORITY 0 /* Driver */ - #define GPIO_APP_PRIORITY 1 /* Application */ -@@ -172,9 +168,7 @@ struct si_info { - struct si_pub pub; /* back plane public state (must be first) */ - struct bcma_bus *icbus; /* handle to soc interconnect bus */ - struct pci_dev *pcibus; /* handle to pci bus */ -- struct pcicore_info *pch; /* PCI/E core handle */ - struct bcma_device *buscore; -- struct list_head var_list; /* list of srom variables */ - - u32 chipst; /* chip status */ - }; -@@ -197,38 +191,20 @@ extern u32 ai_core_cflags(struct bcma_de - extern struct si_pub *ai_attach(struct bcma_bus *pbus); - extern void ai_detach(struct si_pub *sih); - extern uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val); --extern void ai_pci_setup(struct si_pub *sih, uint coremask); - extern void ai_clkctl_init(struct si_pub *sih); - extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih); - extern bool ai_clkctl_cc(struct si_pub *sih, uint mode); --extern int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on); - extern bool ai_deviceremoved(struct si_pub *sih); --extern u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, -- u8 priority); -- --/* OTP status */ --extern bool ai_is_otp_disabled(struct si_pub *sih); -- --/* SPROM availability */ --extern bool ai_is_sprom_available(struct si_pub *sih); - --extern void ai_pci_sleep(struct si_pub *sih); - extern void ai_pci_down(struct si_pub *sih); - extern void ai_pci_up(struct si_pub *sih); --extern int ai_pci_fixcfg(struct si_pub *sih); - --extern void ai_chipcontrl_epa4331(struct si_pub *sih, bool on); - /* Enable Ex-PA for 4313 */ - extern void ai_epa_4313war(struct si_pub *sih); - - extern uint ai_get_buscoretype(struct si_pub *sih); - extern uint ai_get_buscorerev(struct si_pub *sih); - --static inline int ai_get_ccrev(struct si_pub *sih) --{ -- return sih->ccrev; --} -- - static inline u32 ai_get_cccaps(struct si_pub *sih) - { - return sih->cccaps; ---- a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c -@@ -108,7 +108,7 @@ brcms_c_antsel_init_cfg(struct antsel_in - struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) - { - struct antsel_info *asi; -- struct si_pub *sih = wlc->hw->sih; -+ struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; - - asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC); - if (!asi) -@@ -118,7 +118,7 @@ struct antsel_info *brcms_c_antsel_attac - asi->pub = wlc->pub; - asi->antsel_type = ANTSEL_NA; - asi->antsel_avail = false; -- asi->antsel_antswitch = (u8) getintvar(sih, BRCMS_SROM_ANTSWITCH); -+ asi->antsel_antswitch = sprom->antswitch; - - if ((asi->pub->sromrev >= 4) && (asi->antsel_antswitch != 0)) { - switch (asi->antsel_antswitch) { -@@ -128,12 +128,12 @@ struct antsel_info *brcms_c_antsel_attac - /* 4321/2 board with 2x3 switch logic */ - asi->antsel_type = ANTSEL_2x3; - /* Antenna selection availability */ -- if (((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) || -- ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 7)) { -+ if ((sprom->ant_available_bg == 7) || -+ (sprom->ant_available_a == 7)) { - asi->antsel_avail = true; - } else if ( -- (u16) getintvar(sih, BRCMS_SROM_AA2G) == 3 || -- (u16) getintvar(sih, BRCMS_SROM_AA5G) == 3) { -+ sprom->ant_available_bg == 3 || -+ sprom->ant_available_a == 3) { - asi->antsel_avail = false; - } else { - asi->antsel_avail = false; -@@ -146,8 +146,8 @@ struct antsel_info *brcms_c_antsel_attac - break; - } - } else if ((asi->pub->sromrev == 4) && -- ((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) && -- ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 0)) { -+ (sprom->ant_available_bg == 7) && -+ (sprom->ant_available_a == 0)) { - /* hack to match old 4321CB2 cards with 2of3 antenna switch */ - asi->antsel_type = ANTSEL_2x3; - asi->antsel_avail = true; ---- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c -@@ -1110,7 +1110,7 @@ struct brcms_cm_info *brcms_c_channel_mg - char country_abbrev[BRCM_CNTRY_BUF_SZ]; - const struct country_info *country; - struct brcms_pub *pub = wlc->pub; -- char *ccode; -+ struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; - - BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit); - -@@ -1122,9 +1122,8 @@ struct brcms_cm_info *brcms_c_channel_mg - wlc->cmi = wlc_cm; - - /* store the country code for passing up as a regulatory hint */ -- ccode = getvar(wlc->hw->sih, BRCMS_SROM_CCODE); -- if (ccode && brcms_c_country_valid(ccode)) -- strncpy(wlc->pub->srom_ccode, ccode, BRCM_CNTRY_BUF_SZ - 1); -+ if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2)) -+ strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2)); - - /* - * internal country information which must match ---- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c -@@ -28,7 +28,6 @@ - #include <linux/bcma/bcma.h> - #include <net/mac80211.h> - #include <defs.h> --#include "nicpci.h" - #include "phy/phy_int.h" - #include "d11.h" - #include "channel.h" -@@ -773,7 +772,7 @@ void brcms_dpc(unsigned long data) - * Precondition: Since this function is called in brcms_pci_probe() context, - * no locking is required. - */ --static int brcms_request_fw(struct brcms_info *wl, struct pci_dev *pdev) -+static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) - { - int status; - struct device *device = &pdev->dev; -@@ -1025,7 +1024,7 @@ static struct brcms_info *brcms_attach(s - spin_lock_init(&wl->isr_lock); - - /* prepare ucode */ -- if (brcms_request_fw(wl, pdev->bus->host_pci) < 0) { -+ if (brcms_request_fw(wl, pdev) < 0) { - wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in " - "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm"); - brcms_release_fw(wl); -@@ -1046,12 +1045,12 @@ static struct brcms_info *brcms_attach(s - wl->pub->ieee_hw = hw; - - /* register our interrupt handler */ -- if (request_irq(pdev->bus->host_pci->irq, brcms_isr, -+ if (request_irq(pdev->irq, brcms_isr, - IRQF_SHARED, KBUILD_MODNAME, wl)) { - wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); - goto fail; - } -- wl->irq = pdev->bus->host_pci->irq; -+ wl->irq = pdev->irq; - - /* register module */ - brcms_c_module_register(wl->pub, "linux", wl, NULL); -@@ -1101,7 +1100,7 @@ static int __devinit brcms_bcma_probe(st - - dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", - pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, -- pdev->bus->host_pci->irq); -+ pdev->irq); - - if ((pdev->id.manuf != BCMA_MANUF_BCM) || - (pdev->id.id != BCMA_CORE_80211)) ---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c -@@ -850,8 +850,7 @@ brcms_c_dotxstatus(struct brcms_c_info * - */ - if (!(txs->status & TX_STATUS_AMPDU) - && (txs->status & TX_STATUS_INTERMEDIATE)) { -- wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n", -- __func__); -+ BCMMSG(wlc->wiphy, "INTERMEDIATE but not AMPDU\n"); - return false; - } - -@@ -1223,7 +1222,7 @@ static void brcms_b_wait_for_wake(struct - } - - /* control chip clock to save power, enable dynamic clock or force fast clock */ --static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) -+static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, enum bcma_clkmode mode) - { - if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) { - /* new chips with PMU, CCS_FORCEHT will distribute the HT clock -@@ -1233,7 +1232,7 @@ static void brcms_b_clkctl_clk(struct br - */ - - if (wlc_hw->clk) { -- if (mode == CLK_FAST) { -+ if (mode == BCMA_CLKMODE_FAST) { - bcma_set32(wlc_hw->d11core, - D11REGOFFS(clk_ctl_st), - CCS_FORCEHT); -@@ -1264,7 +1263,7 @@ static void brcms_b_clkctl_clk(struct br - ~CCS_FORCEHT); - } - } -- wlc_hw->forcefastclk = (mode == CLK_FAST); -+ wlc_hw->forcefastclk = (mode == BCMA_CLKMODE_FAST); - } else { - - /* old chips w/o PMU, force HT through cc, -@@ -1571,7 +1570,7 @@ void brcms_b_bw_set(struct brcms_hardwar - /* request FAST clock if not on */ - fastclk = wlc_hw->forcefastclk; - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - wlc_phy_bw_state_set(wlc_hw->band->pi, bw); - -@@ -1580,7 +1579,7 @@ void brcms_b_bw_set(struct brcms_hardwar - - /* restore the clk */ - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); - } - - static void brcms_b_upd_synthpu(struct brcms_hardware *wlc_hw) -@@ -1886,27 +1885,20 @@ static bool brcms_c_validboardtype(struc - return true; - } - --static char *brcms_c_get_macaddr(struct brcms_hardware *wlc_hw) -+static void brcms_c_get_macaddr(struct brcms_hardware *wlc_hw, u8 etheraddr[ETH_ALEN]) - { -- enum brcms_srom_id var_id = BRCMS_SROM_MACADDR; -- char *macaddr; -+ struct ssb_sprom *sprom = &wlc_hw->d11core->bus->sprom; - - /* If macaddr exists, use it (Sromrev4, CIS, ...). */ -- macaddr = getvar(wlc_hw->sih, var_id); -- if (macaddr != NULL) -- return macaddr; -+ if (!is_zero_ether_addr(sprom->il0mac)) { -+ memcpy(etheraddr, sprom->il0mac, 6); -+ return; -+ } - - if (wlc_hw->_nbands > 1) -- var_id = BRCMS_SROM_ET1MACADDR; -+ memcpy(etheraddr, sprom->et1mac, 6); - else -- var_id = BRCMS_SROM_IL0MACADDR; -- -- macaddr = getvar(wlc_hw->sih, var_id); -- if (macaddr == NULL) -- wiphy_err(wlc_hw->wlc->wiphy, "wl%d: wlc_get_macaddr: macaddr " -- "getvar(%d) not found\n", wlc_hw->unit, var_id); -- -- return macaddr; -+ memcpy(etheraddr, sprom->il0mac, 6); - } - - /* power both the pll and external oscillator on/off */ -@@ -1921,9 +1913,6 @@ static void brcms_b_xtal(struct brcms_ha - if (!want && wlc_hw->pllreq) - return; - -- if (wlc_hw->sih) -- ai_clkctl_xtal(wlc_hw->sih, XTAL | PLL, want); -- - wlc_hw->sbclk = want; - if (!wlc_hw->sbclk) { - wlc_hw->clk = false; -@@ -2008,7 +1997,7 @@ void brcms_b_corereset(struct brcms_hard - /* request FAST clock if not on */ - fastclk = wlc_hw->forcefastclk; - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - /* reset the dma engines except first time thru */ - if (bcma_core_is_enabled(wlc_hw->d11core)) { -@@ -2057,7 +2046,7 @@ void brcms_b_corereset(struct brcms_hard - brcms_c_mctrl_reset(wlc_hw); - - if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - brcms_b_phy_reset(wlc_hw); - -@@ -2069,7 +2058,7 @@ void brcms_b_corereset(struct brcms_hard - - /* restore the clk setting */ - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); - } - - /* txfifo sizes needs to be modified(increased) since the newer cores -@@ -2222,7 +2211,7 @@ static void brcms_c_gpio_init(struct brc - gm |= gc |= BOARD_GPIO_PACTRL; - - /* apply to gpiocontrol register */ -- ai_gpiocontrol(wlc_hw->sih, gm, gc, GPIO_DRV_PRIORITY); -+ bcma_chipco_gpio_control(&wlc_hw->d11core->bus->drv_cc, gm, gc); - } - - static void brcms_ucode_write(struct brcms_hardware *wlc_hw, -@@ -3375,7 +3364,7 @@ static brcms_b_init(struct brcms_hardwar - /* request FAST clock if not on */ - fastclk = wlc_hw->forcefastclk; - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - /* disable interrupts */ - macintmask = brcms_intrsoff(wlc->wl); -@@ -3409,7 +3398,7 @@ static brcms_b_init(struct brcms_hardwar - - /* restore the clk */ - if (!fastclk) -- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); - } - - static void brcms_c_set_phy_chanspec(struct brcms_c_info *wlc, -@@ -4440,17 +4429,22 @@ static int brcms_b_attach(struct brcms_c - uint unit, bool piomode) - { - struct brcms_hardware *wlc_hw; -- char *macaddr = NULL; - uint err = 0; - uint j; - bool wme = false; - struct shared_phy_params sha_params; - struct wiphy *wiphy = wlc->wiphy; - struct pci_dev *pcidev = core->bus->host_pci; -+ struct ssb_sprom *sprom = &core->bus->sprom; - -- BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, -- pcidev->vendor, -- pcidev->device); -+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) -+ BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, -+ pcidev->vendor, -+ pcidev->device); -+ else -+ BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, -+ core->bus->boardinfo.vendor, -+ core->bus->boardinfo.type); - - wme = true; - -@@ -4476,7 +4470,8 @@ static int brcms_b_attach(struct brcms_c - } - - /* verify again the device is supported */ -- if (!brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { -+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI && -+ !brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported " - "vendor/device (0x%x/0x%x)\n", - unit, pcidev->vendor, pcidev->device); -@@ -4484,8 +4479,13 @@ static int brcms_b_attach(struct brcms_c - goto fail; - } - -- wlc_hw->vendorid = pcidev->vendor; -- wlc_hw->deviceid = pcidev->device; -+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { -+ wlc_hw->vendorid = pcidev->vendor; -+ wlc_hw->deviceid = pcidev->device; -+ } else { -+ wlc_hw->vendorid = core->bus->boardinfo.vendor; -+ wlc_hw->deviceid = core->bus->boardinfo.type; -+ } - - wlc_hw->d11core = core; - wlc_hw->corerev = core->id.rev; -@@ -4505,7 +4505,7 @@ static int brcms_b_attach(struct brcms_c - * is still false; But it will be called again inside wlc_corereset, - * after d11 is out of reset. - */ -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); - - if (!brcms_b_validate_chip_access(wlc_hw)) { -@@ -4516,7 +4516,7 @@ static int brcms_b_attach(struct brcms_c - } - - /* get the board rev, used just below */ -- j = getintvar(wlc_hw->sih, BRCMS_SROM_BOARDREV); -+ j = sprom->board_rev; - /* promote srom boardrev of 0xFF to 1 */ - if (j == BOARDREV_PROMOTABLE) - j = BOARDREV_PROMOTED; -@@ -4529,11 +4529,9 @@ static int brcms_b_attach(struct brcms_c - err = 15; - goto fail; - } -- wlc_hw->sromrev = (u8) getintvar(wlc_hw->sih, BRCMS_SROM_REV); -- wlc_hw->boardflags = (u32) getintvar(wlc_hw->sih, -- BRCMS_SROM_BOARDFLAGS); -- wlc_hw->boardflags2 = (u32) getintvar(wlc_hw->sih, -- BRCMS_SROM_BOARDFLAGS2); -+ wlc_hw->sromrev = sprom->revision; -+ wlc_hw->boardflags = sprom->boardflags_lo + (sprom->boardflags_hi << 16); -+ wlc_hw->boardflags2 = sprom->boardflags2_lo + (sprom->boardflags2_hi << 16); - - if (wlc_hw->boardflags & BFL_NOPLLDOWN) - brcms_b_pllreq(wlc_hw, true, BRCMS_PLLREQ_SHARED); -@@ -4706,25 +4704,18 @@ static int brcms_b_attach(struct brcms_c - */ - - /* init etheraddr state variables */ -- macaddr = brcms_c_get_macaddr(wlc_hw); -- if (macaddr == NULL) { -- wiphy_err(wiphy, "wl%d: brcms_b_attach: macaddr not found\n", -- unit); -- err = 21; -- goto fail; -- } -- if (!mac_pton(macaddr, wlc_hw->etheraddr) || -- is_broadcast_ether_addr(wlc_hw->etheraddr) || -+ brcms_c_get_macaddr(wlc_hw, wlc_hw->etheraddr); -+ -+ if (is_broadcast_ether_addr(wlc_hw->etheraddr) || - is_zero_ether_addr(wlc_hw->etheraddr)) { -- wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr %s\n", -- unit, macaddr); -+ wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr\n", -+ unit); - err = 22; - goto fail; - } - -- BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x macaddr: %s\n", -- wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih), -- macaddr); -+ BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x\n", -+ wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih)); - - return err; - -@@ -4774,16 +4765,16 @@ static bool brcms_c_attach_stf_ant_init( - int aa; - uint unit; - int bandtype; -- struct si_pub *sih = wlc->hw->sih; -+ struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; - - unit = wlc->pub->unit; - bandtype = wlc->band->bandtype; - - /* get antennas available */ - if (bandtype == BRCM_BAND_5G) -- aa = (s8) getintvar(sih, BRCMS_SROM_AA5G); -+ aa = sprom->ant_available_a; - else -- aa = (s8) getintvar(sih, BRCMS_SROM_AA2G); -+ aa = sprom->ant_available_bg; - - if ((aa < 1) || (aa > 15)) { - wiphy_err(wlc->wiphy, "wl%d: %s: Invalid antennas available in" -@@ -4803,9 +4794,9 @@ static bool brcms_c_attach_stf_ant_init( - - /* Compute Antenna Gain */ - if (bandtype == BRCM_BAND_5G) -- wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG1); -+ wlc->band->antgain = sprom->antenna_gain.a1; - else -- wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG0); -+ wlc->band->antgain = sprom->antenna_gain.a0; - - brcms_c_attach_antgain_init(wlc); - -@@ -4956,15 +4947,6 @@ static int brcms_b_detach(struct brcms_c - - callbacks = 0; - -- if (wlc_hw->sih) { -- /* -- * detach interrupt sync mechanism since interrupt is disabled -- * and per-port interrupt object may has been freed. this must -- * be done before sb core switch -- */ -- ai_pci_sleep(wlc_hw->sih); -- } -- - brcms_b_detach_dmapio(wlc_hw); - - band = wlc_hw->band; -@@ -5051,9 +5033,7 @@ static void brcms_b_hw_up(struct brcms_h - */ - brcms_b_xtal(wlc_hw, ON); - ai_clkctl_init(wlc_hw->sih); -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -- -- ai_pci_fixcfg(wlc_hw->sih); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - /* - * TODO: test suspend/resume -@@ -5082,8 +5062,6 @@ static void brcms_b_hw_up(struct brcms_h - - static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) - { -- uint coremask; -- - BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit); - - /* -@@ -5092,15 +5070,14 @@ static int brcms_b_up_prep(struct brcms_ - */ - brcms_b_xtal(wlc_hw, ON); - ai_clkctl_init(wlc_hw->sih); -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - - /* - * Configure pci/pcmcia here instead of in brcms_c_attach() - * to allow mfg hotswap: down, hotswap (chip power cycle), up. - */ -- coremask = (1 << wlc_hw->wlc->core->coreidx); -- -- ai_pci_setup(wlc_hw->sih, coremask); -+ bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci, wlc_hw->d11core, -+ true); - - /* - * Need to read the hwradio status here to cover the case where the -@@ -5130,7 +5107,7 @@ static int brcms_b_up_finish(struct brcm - wlc_phy_hw_state_upd(wlc_hw->band->pi, true); - - /* FULLY enable dynamic power control and d11 core interrupt */ -- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); - brcms_intrson(wlc_hw->wlc->wl); - return 0; - } -@@ -5271,7 +5248,7 @@ static int brcms_b_bmac_down_prep(struct - brcms_intrsoff(wlc_hw->wlc->wl); - - /* ensure we're running on the pll clock again */ -- brcms_b_clkctl_clk(wlc_hw, CLK_FAST); -+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); - } - /* down phy at the last of this stage */ - callbacks += wlc_phy_down(wlc_hw->band->pi); ---- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c -+++ /dev/null -@@ -1,826 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#include <linux/slab.h> --#include <linux/delay.h> --#include <linux/pci.h> -- --#include <defs.h> --#include <soc.h> --#include <chipcommon.h> --#include "aiutils.h" --#include "pub.h" --#include "nicpci.h" -- --/* SPROM offsets */ --#define SRSH_ASPM_OFFSET 4 /* word 4 */ --#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */ --#define SRSH_ASPM_L1_ENB 0x10 /* bit 4 */ --#define SRSH_ASPM_L0s_ENB 0x8 /* bit 3 */ -- --#define SRSH_PCIE_MISC_CONFIG 5 /* word 5 */ --#define SRSH_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ --#define SRSH_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ --#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */ --#define SRSH_BD_OFFSET 6 /* word 6 */ -- --/* chipcontrol */ --#define CHIPCTRL_4321_PLL_DOWN 0x800000/* serdes PLL down override */ -- --/* MDIO control */ --#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ --#define MDIOCTL_DIVISOR_VAL 0x2 --#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ --#define MDIOCTL_ACCESS_DONE 0x100 /* Transaction complete */ -- --/* MDIO Data */ --#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ --#define MDIODATA_TA 0x00020000 /* Turnaround */ -- --#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ --#define MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ --#define MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ --#define MDIODATA_DEVADDR_MASK 0x0f800000 -- /* Physmedia devaddr Mask */ -- --/* MDIO Data for older revisions < 10 */ --#define MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift */ --#define MDIODATA_REGADDR_MASK_OLD 0x003c0000 -- /* Regaddr Mask */ --#define MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift */ --#define MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 -- /* Physmedia devaddr Mask */ -- --/* Transactions flags */ --#define MDIODATA_WRITE 0x10000000 --#define MDIODATA_READ 0x20000000 --#define MDIODATA_START 0x40000000 -- --#define MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ --#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ -- --/* serdes regs (rev < 10) */ --#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ --#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ --#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ -- --/* SERDES RX registers */ --#define SERDES_RX_CTRL 1 /* Rx cntrl */ --#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ --#define SERDES_RX_CDR 6 /* CDR */ --#define SERDES_RX_CDRBW 7 /* CDR BW */ --/* SERDES RX control register */ --#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ --#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ -- --/* SERDES PLL registers */ --#define SERDES_PLL_CTRL 1 /* PLL control reg */ --#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ -- --/* Linkcontrol reg offset in PCIE Cap */ --#define PCIE_CAP_LINKCTRL_OFFSET 16 /* offset in pcie cap */ --#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */ --#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */ --#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */ -- --#define PCIE_ASPM_ENAB 3 /* ASPM L0s & L1 in linkctrl */ --#define PCIE_ASPM_L1_ENAB 2 /* ASPM L0s & L1 in linkctrl */ --#define PCIE_ASPM_L0s_ENAB 1 /* ASPM L0s & L1 in linkctrl */ --#define PCIE_ASPM_DISAB 0 /* ASPM L0s & L1 in linkctrl */ -- --/* Power management threshold */ --#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */ --#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */ --#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */ --#define PCIE_ASPMTIMER_EXTEND 0x01000000 -- /* > rev7: -- * enable extend ASPM timer -- */ -- --/* different register spaces to access thru pcie indirect access */ --#define PCIE_CONFIGREGS 1 /* Access to config space */ --#define PCIE_PCIEREGS 2 /* Access to pcie registers */ -- --/* PCIE protocol PHY diagnostic registers */ --#define PCIE_PLP_STATUSREG 0x204 /* Status */ -- --/* Status reg PCIE_PLP_STATUSREG */ --#define PCIE_PLP_POLARITYINV_STAT 0x10 -- --/* PCIE protocol DLLP diagnostic registers */ --#define PCIE_DLLP_LCREG 0x100 /* Link Control */ --#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ -- --/* PCIE protocol TLP diagnostic registers */ --#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ -- --/* Sonics to PCI translation types */ --#define SBTOPCI_PREF 0x4 /* prefetch enable */ --#define SBTOPCI_BURST 0x8 /* burst enable */ --#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ -- --#define PCI_CLKRUN_DSBL 0x8000 /* Bit 15 forceClkrun */ -- --/* PCI core index in SROM shadow area */ --#define SRSH_PI_OFFSET 0 /* first word */ --#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ --#define SRSH_PI_SHIFT 12 /* bit 15:12 */ -- --#define PCIREGOFFS(field) offsetof(struct sbpciregs, field) --#define PCIEREGOFFS(field) offsetof(struct sbpcieregs, field) -- --/* Sonics side: PCI core and host control registers */ --struct sbpciregs { -- u32 control; /* PCI control */ -- u32 PAD[3]; -- u32 arbcontrol; /* PCI arbiter control */ -- u32 clkrun; /* Clkrun Control (>=rev11) */ -- u32 PAD[2]; -- u32 intstatus; /* Interrupt status */ -- u32 intmask; /* Interrupt mask */ -- u32 sbtopcimailbox; /* Sonics to PCI mailbox */ -- u32 PAD[9]; -- u32 bcastaddr; /* Sonics broadcast address */ -- u32 bcastdata; /* Sonics broadcast data */ -- u32 PAD[2]; -- u32 gpioin; /* ro: gpio input (>=rev2) */ -- u32 gpioout; /* rw: gpio output (>=rev2) */ -- u32 gpioouten; /* rw: gpio output enable (>= rev2) */ -- u32 gpiocontrol; /* rw: gpio control (>= rev2) */ -- u32 PAD[36]; -- u32 sbtopci0; /* Sonics to PCI translation 0 */ -- u32 sbtopci1; /* Sonics to PCI translation 1 */ -- u32 sbtopci2; /* Sonics to PCI translation 2 */ -- u32 PAD[189]; -- u32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ -- u16 sprom[36]; /* SPROM shadow Area */ -- u32 PAD[46]; --}; -- --/* SB side: PCIE core and host control registers */ --struct sbpcieregs { -- u32 control; /* host mode only */ -- u32 PAD[2]; -- u32 biststatus; /* bist Status: 0x00C */ -- u32 gpiosel; /* PCIE gpio sel: 0x010 */ -- u32 gpioouten; /* PCIE gpio outen: 0x14 */ -- u32 PAD[2]; -- u32 intstatus; /* Interrupt status: 0x20 */ -- u32 intmask; /* Interrupt mask: 0x24 */ -- u32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ -- u32 PAD[53]; -- u32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ -- u32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ -- u32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ -- u32 PAD[5]; -- -- /* pcie core supports in direct access to config space */ -- u32 configaddr; /* pcie config space access: Address field: 0x120 */ -- u32 configdata; /* pcie config space access: Data field: 0x124 */ -- -- /* mdio access to serdes */ -- u32 mdiocontrol; /* controls the mdio access: 0x128 */ -- u32 mdiodata; /* Data to the mdio access: 0x12c */ -- -- /* pcie protocol phy/dllp/tlp register indirect access mechanism */ -- u32 pcieindaddr; /* indirect access to -- * the internal register: 0x130 -- */ -- u32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */ -- -- u32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */ -- u32 PAD[177]; -- u32 pciecfg[4][64]; /* 0x400 - 0x7FF, PCIE Cfg Space */ -- u16 sprom[64]; /* SPROM shadow Area */ --}; -- --struct pcicore_info { -- struct bcma_device *core; -- struct si_pub *sih; /* System interconnect handle */ -- struct pci_dev *dev; -- u8 pciecap_lcreg_offset;/* PCIE capability LCreg offset -- * in the config space -- */ -- bool pcie_pr42767; -- u8 pcie_polarity; -- u8 pcie_war_aspm_ovr; /* Override ASPM/Clkreq settings */ -- -- u8 pmecap_offset; /* PM Capability offset in the config space */ -- bool pmecap; /* Capable of generating PME */ --}; -- --#define PCIE_ASPM(sih) \ -- ((ai_get_buscoretype(sih) == PCIE_CORE_ID) && \ -- ((ai_get_buscorerev(sih) >= 3) && \ -- (ai_get_buscorerev(sih) <= 5))) -- -- --/* delay needed between the mdio control/ mdiodata register data access */ --static void pr28829_delay(void) --{ -- udelay(10); --} -- --/* Initialize the PCI core. -- * It's caller's responsibility to make sure that this is done only once -- */ --struct pcicore_info *pcicore_init(struct si_pub *sih, struct bcma_device *core) --{ -- struct pcicore_info *pi; -- -- /* alloc struct pcicore_info */ -- pi = kzalloc(sizeof(struct pcicore_info), GFP_ATOMIC); -- if (pi == NULL) -- return NULL; -- -- pi->sih = sih; -- pi->dev = core->bus->host_pci; -- pi->core = core; -- -- if (core->id.id == PCIE_CORE_ID) { -- u8 cap_ptr; -- cap_ptr = pcicore_find_pci_capability(pi->dev, PCI_CAP_ID_EXP, -- NULL, NULL); -- pi->pciecap_lcreg_offset = cap_ptr + PCIE_CAP_LINKCTRL_OFFSET; -- } -- return pi; --} -- --void pcicore_deinit(struct pcicore_info *pch) --{ -- kfree(pch); --} -- --/* return cap_offset if requested capability exists in the PCI config space */ --/* Note that it's caller's responsibility to make sure it's a pci bus */ --u8 --pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, -- unsigned char *buf, u32 *buflen) --{ -- u8 cap_id; -- u8 cap_ptr = 0; -- u32 bufsize; -- u8 byte_val; -- -- /* check for Header type 0 */ -- pci_read_config_byte(dev, PCI_HEADER_TYPE, &byte_val); -- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) -- goto end; -- -- /* check if the capability pointer field exists */ -- pci_read_config_byte(dev, PCI_STATUS, &byte_val); -- if (!(byte_val & PCI_STATUS_CAP_LIST)) -- goto end; -- -- pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &cap_ptr); -- /* check if the capability pointer is 0x00 */ -- if (cap_ptr == 0x00) -- goto end; -- -- /* loop thru the capability list -- * and see if the pcie capability exists -- */ -- -- pci_read_config_byte(dev, cap_ptr, &cap_id); -- -- while (cap_id != req_cap_id) { -- pci_read_config_byte(dev, cap_ptr + 1, &cap_ptr); -- if (cap_ptr == 0x00) -- break; -- pci_read_config_byte(dev, cap_ptr, &cap_id); -- } -- if (cap_id != req_cap_id) -- goto end; -- -- /* found the caller requested capability */ -- if (buf != NULL && buflen != NULL) { -- u8 cap_data; -- -- bufsize = *buflen; -- if (!bufsize) -- goto end; -- *buflen = 0; -- /* copy the capability data excluding cap ID and next ptr */ -- cap_data = cap_ptr + 2; -- if ((bufsize + cap_data) > PCI_SZPCR) -- bufsize = PCI_SZPCR - cap_data; -- *buflen = bufsize; -- while (bufsize--) { -- pci_read_config_byte(dev, cap_data, buf); -- cap_data++; -- buf++; -- } -- } --end: -- return cap_ptr; --} -- --/* ***** Register Access API */ --static uint --pcie_readreg(struct bcma_device *core, uint addrtype, uint offset) --{ -- uint retval = 0xFFFFFFFF; -- -- switch (addrtype) { -- case PCIE_CONFIGREGS: -- bcma_write32(core, PCIEREGOFFS(configaddr), offset); -- (void)bcma_read32(core, PCIEREGOFFS(configaddr)); -- retval = bcma_read32(core, PCIEREGOFFS(configdata)); -- break; -- case PCIE_PCIEREGS: -- bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); -- (void)bcma_read32(core, PCIEREGOFFS(pcieindaddr)); -- retval = bcma_read32(core, PCIEREGOFFS(pcieinddata)); -- break; -- } -- -- return retval; --} -- --static uint pcie_writereg(struct bcma_device *core, uint addrtype, -- uint offset, uint val) --{ -- switch (addrtype) { -- case PCIE_CONFIGREGS: -- bcma_write32(core, PCIEREGOFFS(configaddr), offset); -- bcma_write32(core, PCIEREGOFFS(configdata), val); -- break; -- case PCIE_PCIEREGS: -- bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); -- bcma_write32(core, PCIEREGOFFS(pcieinddata), val); -- break; -- default: -- break; -- } -- return 0; --} -- --static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk) --{ -- uint mdiodata, i = 0; -- uint pcie_serdes_spinwait = 200; -- -- mdiodata = (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | -- (MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | -- (MDIODATA_BLK_ADDR << MDIODATA_REGADDR_SHF) | -- (blk << 4)); -- bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); -- -- pr28829_delay(); -- /* retry till the transaction is complete */ -- while (i < pcie_serdes_spinwait) { -- if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & -- MDIOCTL_ACCESS_DONE) -- break; -- -- udelay(1000); -- i++; -- } -- -- if (i >= pcie_serdes_spinwait) -- return false; -- -- return true; --} -- --static int --pcie_mdioop(struct pcicore_info *pi, uint physmedia, uint regaddr, bool write, -- uint *val) --{ -- uint mdiodata; -- uint i = 0; -- uint pcie_serdes_spinwait = 10; -- -- /* enable mdio access to SERDES */ -- bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), -- MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); -- -- if (ai_get_buscorerev(pi->sih) >= 10) { -- /* new serdes is slower in rw, -- * using two layers of reg address mapping -- */ -- if (!pcie_mdiosetblock(pi, physmedia)) -- return 1; -- mdiodata = ((MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | -- (regaddr << MDIODATA_REGADDR_SHF)); -- pcie_serdes_spinwait *= 20; -- } else { -- mdiodata = ((physmedia << MDIODATA_DEVADDR_SHF_OLD) | -- (regaddr << MDIODATA_REGADDR_SHF_OLD)); -- } -- -- if (!write) -- mdiodata |= (MDIODATA_START | MDIODATA_READ | MDIODATA_TA); -- else -- mdiodata |= (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | -- *val); -- -- bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); -- -- pr28829_delay(); -- -- /* retry till the transaction is complete */ -- while (i < pcie_serdes_spinwait) { -- if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & -- MDIOCTL_ACCESS_DONE) { -- if (!write) { -- pr28829_delay(); -- *val = (bcma_read32(pi->core, -- PCIEREGOFFS(mdiodata)) & -- MDIODATA_MASK); -- } -- /* Disable mdio access to SERDES */ -- bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); -- return 0; -- } -- udelay(1000); -- i++; -- } -- -- /* Timed out. Disable mdio access to SERDES. */ -- bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); -- return 1; --} -- --/* use the mdio interface to read from mdio slaves */ --static int --pcie_mdioread(struct pcicore_info *pi, uint physmedia, uint regaddr, -- uint *regval) --{ -- return pcie_mdioop(pi, physmedia, regaddr, false, regval); --} -- --/* use the mdio interface to write to mdio slaves */ --static int --pcie_mdiowrite(struct pcicore_info *pi, uint physmedia, uint regaddr, uint val) --{ -- return pcie_mdioop(pi, physmedia, regaddr, true, &val); --} -- --/* ***** Support functions ***** */ --static u8 pcie_clkreq(struct pcicore_info *pi, u32 mask, u32 val) --{ -- u32 reg_val; -- u8 offset; -- -- offset = pi->pciecap_lcreg_offset; -- if (!offset) -- return 0; -- -- pci_read_config_dword(pi->dev, offset, ®_val); -- /* set operation */ -- if (mask) { -- if (val) -- reg_val |= PCIE_CLKREQ_ENAB; -- else -- reg_val &= ~PCIE_CLKREQ_ENAB; -- pci_write_config_dword(pi->dev, offset, reg_val); -- pci_read_config_dword(pi->dev, offset, ®_val); -- } -- if (reg_val & PCIE_CLKREQ_ENAB) -- return 1; -- else -- return 0; --} -- --static void pcie_extendL1timer(struct pcicore_info *pi, bool extend) --{ -- u32 w; -- struct si_pub *sih = pi->sih; -- -- if (ai_get_buscoretype(sih) != PCIE_CORE_ID || -- ai_get_buscorerev(sih) < 7) -- return; -- -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); -- if (extend) -- w |= PCIE_ASPMTIMER_EXTEND; -- else -- w &= ~PCIE_ASPMTIMER_EXTEND; -- pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w); -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); --} -- --/* centralized clkreq control policy */ --static void pcie_clkreq_upd(struct pcicore_info *pi, uint state) --{ -- struct si_pub *sih = pi->sih; -- -- switch (state) { -- case SI_DOATTACH: -- if (PCIE_ASPM(sih)) -- pcie_clkreq(pi, 1, 0); -- break; -- case SI_PCIDOWN: -- /* turn on serdes PLL down */ -- if (ai_get_buscorerev(sih) == 6) { -- ai_cc_reg(sih, -- offsetof(struct chipcregs, chipcontrol_addr), -- ~0, 0); -- ai_cc_reg(sih, -- offsetof(struct chipcregs, chipcontrol_data), -- ~0x40, 0); -- } else if (pi->pcie_pr42767) { -- pcie_clkreq(pi, 1, 1); -- } -- break; -- case SI_PCIUP: -- /* turn off serdes PLL down */ -- if (ai_get_buscorerev(sih) == 6) { -- ai_cc_reg(sih, -- offsetof(struct chipcregs, chipcontrol_addr), -- ~0, 0); -- ai_cc_reg(sih, -- offsetof(struct chipcregs, chipcontrol_data), -- ~0x40, 0x40); -- } else if (PCIE_ASPM(sih)) { /* disable clkreq */ -- pcie_clkreq(pi, 1, 0); -- } -- break; -- } --} -- --/* ***** PCI core WARs ***** */ --/* Done only once at attach time */ --static void pcie_war_polarity(struct pcicore_info *pi) --{ -- u32 w; -- -- if (pi->pcie_polarity != 0) -- return; -- -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_PLP_STATUSREG); -- -- /* Detect the current polarity at attach and force that polarity and -- * disable changing the polarity -- */ -- if ((w & PCIE_PLP_POLARITYINV_STAT) == 0) -- pi->pcie_polarity = SERDES_RX_CTRL_FORCE; -- else -- pi->pcie_polarity = (SERDES_RX_CTRL_FORCE | -- SERDES_RX_CTRL_POLARITY); --} -- --/* enable ASPM and CLKREQ if srom doesn't have it */ --/* Needs to happen when update to shadow SROM is needed -- * : Coming out of 'standby'/'hibernate' -- * : If pcie_war_aspm_ovr state changed -- */ --static void pcie_war_aspm_clkreq(struct pcicore_info *pi) --{ -- struct si_pub *sih = pi->sih; -- u16 val16; -- u32 w; -- -- if (!PCIE_ASPM(sih)) -- return; -- -- /* bypass this on QT or VSIM */ -- val16 = bcma_read16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET])); -- -- val16 &= ~SRSH_ASPM_ENB; -- if (pi->pcie_war_aspm_ovr == PCIE_ASPM_ENAB) -- val16 |= SRSH_ASPM_ENB; -- else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L1_ENAB) -- val16 |= SRSH_ASPM_L1_ENB; -- else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L0s_ENAB) -- val16 |= SRSH_ASPM_L0s_ENB; -- -- bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET]), val16); -- -- pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); -- w &= ~PCIE_ASPM_ENAB; -- w |= pi->pcie_war_aspm_ovr; -- pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); -- -- val16 = bcma_read16(pi->core, -- PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5])); -- -- if (pi->pcie_war_aspm_ovr != PCIE_ASPM_DISAB) { -- val16 |= SRSH_CLKREQ_ENB; -- pi->pcie_pr42767 = true; -- } else -- val16 &= ~SRSH_CLKREQ_ENB; -- -- bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5]), -- val16); --} -- --/* Apply the polarity determined at the start */ --/* Needs to happen when coming out of 'standby'/'hibernate' */ --static void pcie_war_serdes(struct pcicore_info *pi) --{ -- u32 w = 0; -- -- if (pi->pcie_polarity != 0) -- pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CTRL, -- pi->pcie_polarity); -- -- pcie_mdioread(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, &w); -- if (w & PLL_CTRL_FREQDET_EN) { -- w &= ~PLL_CTRL_FREQDET_EN; -- pcie_mdiowrite(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, w); -- } --} -- --/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ --/* Needs to happen when coming out of 'standby'/'hibernate' */ --static void pcie_misc_config_fixup(struct pcicore_info *pi) --{ -- u16 val16; -- -- val16 = bcma_read16(pi->core, -- PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG])); -- -- if ((val16 & SRSH_L23READY_EXIT_NOPERST) == 0) { -- val16 |= SRSH_L23READY_EXIT_NOPERST; -- bcma_write16(pi->core, -- PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG]), val16); -- } --} -- --/* quick hack for testing */ --/* Needs to happen when coming out of 'standby'/'hibernate' */ --static void pcie_war_noplldown(struct pcicore_info *pi) --{ -- /* turn off serdes PLL down */ -- ai_cc_reg(pi->sih, offsetof(struct chipcregs, chipcontrol), -- CHIPCTRL_4321_PLL_DOWN, CHIPCTRL_4321_PLL_DOWN); -- -- /* clear srom shadow backdoor */ -- bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_BD_OFFSET]), 0); --} -- --/* Needs to happen when coming out of 'standby'/'hibernate' */ --static void pcie_war_pci_setup(struct pcicore_info *pi) --{ -- struct si_pub *sih = pi->sih; -- u32 w; -- -- if (ai_get_buscorerev(sih) == 0 || ai_get_buscorerev(sih) == 1) { -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, -- PCIE_TLP_WORKAROUNDSREG); -- w |= 0x8; -- pcie_writereg(pi->core, PCIE_PCIEREGS, -- PCIE_TLP_WORKAROUNDSREG, w); -- } -- -- if (ai_get_buscorerev(sih) == 1) { -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG); -- w |= 0x40; -- pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w); -- } -- -- if (ai_get_buscorerev(sih) == 0) { -- pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128); -- pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100); -- pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466); -- } else if (PCIE_ASPM(sih)) { -- /* Change the L1 threshold for better performance */ -- w = pcie_readreg(pi->core, PCIE_PCIEREGS, -- PCIE_DLLP_PMTHRESHREG); -- w &= ~PCIE_L1THRESHOLDTIME_MASK; -- w |= PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT; -- pcie_writereg(pi->core, PCIE_PCIEREGS, -- PCIE_DLLP_PMTHRESHREG, w); -- -- pcie_war_serdes(pi); -- -- pcie_war_aspm_clkreq(pi); -- } else if (ai_get_buscorerev(pi->sih) == 7) -- pcie_war_noplldown(pi); -- -- /* Note that the fix is actually in the SROM, -- * that's why this is open-ended -- */ -- if (ai_get_buscorerev(pi->sih) >= 6) -- pcie_misc_config_fixup(pi); --} -- --/* ***** Functions called during driver state changes ***** */ --void pcicore_attach(struct pcicore_info *pi, int state) --{ -- struct si_pub *sih = pi->sih; -- u32 bfl2 = (u32)getintvar(sih, BRCMS_SROM_BOARDFLAGS2); -- -- /* Determine if this board needs override */ -- if (PCIE_ASPM(sih)) { -- if (bfl2 & BFL2_PCIEWAR_OVR) -- pi->pcie_war_aspm_ovr = PCIE_ASPM_DISAB; -- else -- pi->pcie_war_aspm_ovr = PCIE_ASPM_ENAB; -- } -- -- /* These need to happen in this order only */ -- pcie_war_polarity(pi); -- -- pcie_war_serdes(pi); -- -- pcie_war_aspm_clkreq(pi); -- -- pcie_clkreq_upd(pi, state); -- --} -- --void pcicore_hwup(struct pcicore_info *pi) --{ -- if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) -- return; -- -- pcie_war_pci_setup(pi); --} -- --void pcicore_up(struct pcicore_info *pi, int state) --{ -- if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) -- return; -- -- /* Restore L1 timer for better performance */ -- pcie_extendL1timer(pi, true); -- -- pcie_clkreq_upd(pi, state); --} -- --/* When the device is going to enter D3 state -- * (or the system is going to enter S3/S4 states) -- */ --void pcicore_sleep(struct pcicore_info *pi) --{ -- u32 w; -- -- if (!pi || !PCIE_ASPM(pi->sih)) -- return; -- -- pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); -- w &= ~PCIE_CAP_LCREG_ASPML1; -- pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); -- -- pi->pcie_pr42767 = false; --} -- --void pcicore_down(struct pcicore_info *pi, int state) --{ -- if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) -- return; -- -- pcie_clkreq_upd(pi, state); -- -- /* Reduce L1 timer for better power savings */ -- pcie_extendL1timer(pi, false); --} -- --void pcicore_fixcfg(struct pcicore_info *pi) --{ -- struct bcma_device *core = pi->core; -- u16 val16; -- uint regoff; -- -- switch (pi->core->id.id) { -- case BCMA_CORE_PCI: -- regoff = PCIREGOFFS(sprom[SRSH_PI_OFFSET]); -- break; -- -- case BCMA_CORE_PCIE: -- regoff = PCIEREGOFFS(sprom[SRSH_PI_OFFSET]); -- break; -- -- default: -- return; -- } -- -- val16 = bcma_read16(pi->core, regoff); -- if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != -- (u16)core->core_index) { -- val16 = ((u16)core->core_index << SRSH_PI_SHIFT) | -- (val16 & ~SRSH_PI_MASK); -- bcma_write16(pi->core, regoff, val16); -- } --} -- --/* precondition: current core is pci core */ --void --pcicore_pci_setup(struct pcicore_info *pi) --{ -- bcma_set32(pi->core, PCIREGOFFS(sbtopci2), -- SBTOPCI_PREF | SBTOPCI_BURST); -- -- if (pi->core->id.rev >= 11) { -- bcma_set32(pi->core, PCIREGOFFS(sbtopci2), -- SBTOPCI_RC_READMULTI); -- bcma_set32(pi->core, PCIREGOFFS(clkrun), PCI_CLKRUN_DSBL); -- (void)bcma_read32(pi->core, PCIREGOFFS(clkrun)); -- } --} ---- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h -+++ /dev/null -@@ -1,77 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#ifndef _BRCM_NICPCI_H_ --#define _BRCM_NICPCI_H_ -- --#include "types.h" -- --/* PCI configuration address space size */ --#define PCI_SZPCR 256 -- --/* Brcm PCI configuration registers */ --/* backplane address space accessed by BAR0 */ --#define PCI_BAR0_WIN 0x80 --/* sprom property control */ --#define PCI_SPROM_CONTROL 0x88 --/* mask of PCI and other cores interrupts */ --#define PCI_INT_MASK 0x94 --/* backplane core interrupt mask bits offset */ --#define PCI_SBIM_SHIFT 8 --/* backplane address space accessed by second 4KB of BAR0 */ --#define PCI_BAR0_WIN2 0xac --/* pci config space gpio input (>=rev3) */ --#define PCI_GPIO_IN 0xb0 --/* pci config space gpio output (>=rev3) */ --#define PCI_GPIO_OUT 0xb4 --/* pci config space gpio output enable (>=rev3) */ --#define PCI_GPIO_OUTEN 0xb8 -- --/* bar0 + 4K accesses external sprom */ --#define PCI_BAR0_SPROM_OFFSET (4 * 1024) --/* bar0 + 6K accesses pci core registers */ --#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) --/* -- * pci core SB registers are at the end of the -- * 8KB window, so their address is the "regular" -- * address plus 4K -- */ --#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) --/* bar0 window size Match with corerev 13 */ --#define PCI_BAR0_WINSZ (16 * 1024) --/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ --/* bar0 + 8K accesses pci/pcie core registers */ --#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) --/* bar0 + 12K accesses chipc core registers */ --#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) -- --struct sbpciregs; --struct sbpcieregs; -- --extern struct pcicore_info *pcicore_init(struct si_pub *sih, -- struct bcma_device *core); --extern void pcicore_deinit(struct pcicore_info *pch); --extern void pcicore_attach(struct pcicore_info *pch, int state); --extern void pcicore_hwup(struct pcicore_info *pch); --extern void pcicore_up(struct pcicore_info *pch, int state); --extern void pcicore_sleep(struct pcicore_info *pch); --extern void pcicore_down(struct pcicore_info *pch, int state); --extern u8 pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, -- unsigned char *buf, u32 *buflen); --extern void pcicore_fixcfg(struct pcicore_info *pch); --extern void pcicore_pci_setup(struct pcicore_info *pch); -- --#endif /* _BRCM_NICPCI_H_ */ ---- a/drivers/net/wireless/brcm80211/brcmsmac/otp.c -+++ /dev/null -@@ -1,410 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#include <linux/io.h> --#include <linux/errno.h> --#include <linux/string.h> -- --#include <brcm_hw_ids.h> --#include <chipcommon.h> --#include "aiutils.h" --#include "otp.h" -- --#define OTPS_GUP_MASK 0x00000f00 --#define OTPS_GUP_SHIFT 8 --/* h/w subregion is programmed */ --#define OTPS_GUP_HW 0x00000100 --/* s/w subregion is programmed */ --#define OTPS_GUP_SW 0x00000200 --/* chipid/pkgopt subregion is programmed */ --#define OTPS_GUP_CI 0x00000400 --/* fuse subregion is programmed */ --#define OTPS_GUP_FUSE 0x00000800 -- --/* Fields in otpprog in rev >= 21 */ --#define OTPP_COL_MASK 0x000000ff --#define OTPP_COL_SHIFT 0 --#define OTPP_ROW_MASK 0x0000ff00 --#define OTPP_ROW_SHIFT 8 --#define OTPP_OC_MASK 0x0f000000 --#define OTPP_OC_SHIFT 24 --#define OTPP_READERR 0x10000000 --#define OTPP_VALUE_MASK 0x20000000 --#define OTPP_VALUE_SHIFT 29 --#define OTPP_START_BUSY 0x80000000 --#define OTPP_READ 0x40000000 -- --/* Opcodes for OTPP_OC field */ --#define OTPPOC_READ 0 --#define OTPPOC_BIT_PROG 1 --#define OTPPOC_VERIFY 3 --#define OTPPOC_INIT 4 --#define OTPPOC_SET 5 --#define OTPPOC_RESET 6 --#define OTPPOC_OCST 7 --#define OTPPOC_ROW_LOCK 8 --#define OTPPOC_PRESCN_TEST 9 -- --#define OTPTYPE_IPX(ccrev) ((ccrev) == 21 || (ccrev) >= 23) -- --#define OTPP_TRIES 10000000 /* # of tries for OTPP */ -- --#define MAXNUMRDES 9 /* Maximum OTP redundancy entries */ -- --/* Fixed size subregions sizes in words */ --#define OTPGU_CI_SZ 2 -- --struct otpinfo; -- --/* OTP function struct */ --struct otp_fn_s { -- int (*init)(struct si_pub *sih, struct otpinfo *oi); -- int (*read_region)(struct otpinfo *oi, int region, u16 *data, -- uint *wlen); --}; -- --struct otpinfo { -- struct bcma_device *core; /* chipc core */ -- const struct otp_fn_s *fn; /* OTP functions */ -- struct si_pub *sih; /* Saved sb handle */ -- -- /* IPX OTP section */ -- u16 wsize; /* Size of otp in words */ -- u16 rows; /* Geometry */ -- u16 cols; /* Geometry */ -- u32 status; /* Flag bits (lock/prog/rv). -- * (Reflected only when OTP is power cycled) -- */ -- u16 hwbase; /* hardware subregion offset */ -- u16 hwlim; /* hardware subregion boundary */ -- u16 swbase; /* software subregion offset */ -- u16 swlim; /* software subregion boundary */ -- u16 fbase; /* fuse subregion offset */ -- u16 flim; /* fuse subregion boundary */ -- int otpgu_base; /* offset to General Use Region */ --}; -- --/* OTP layout */ --/* CC revs 21, 24 and 27 OTP General Use Region word offset */ --#define REVA4_OTPGU_BASE 12 -- --/* CC revs 23, 25, 26, 28 and above OTP General Use Region word offset */ --#define REVB8_OTPGU_BASE 20 -- --/* CC rev 36 OTP General Use Region word offset */ --#define REV36_OTPGU_BASE 12 -- --/* Subregion word offsets in General Use region */ --#define OTPGU_HSB_OFF 0 --#define OTPGU_SFB_OFF 1 --#define OTPGU_CI_OFF 2 --#define OTPGU_P_OFF 3 --#define OTPGU_SROM_OFF 4 -- --/* Flag bit offsets in General Use region */ --#define OTPGU_HWP_OFF 60 --#define OTPGU_SWP_OFF 61 --#define OTPGU_CIP_OFF 62 --#define OTPGU_FUSEP_OFF 63 --#define OTPGU_CIP_MSK 0x4000 --#define OTPGU_P_MSK 0xf000 --#define OTPGU_P_SHIFT (OTPGU_HWP_OFF % 16) -- --/* OTP Size */ --#define OTP_SZ_FU_324 ((roundup(324, 8))/8) /* 324 bits */ --#define OTP_SZ_FU_288 (288/8) /* 288 bits */ --#define OTP_SZ_FU_216 (216/8) /* 216 bits */ --#define OTP_SZ_FU_72 (72/8) /* 72 bits */ --#define OTP_SZ_CHECKSUM (16/8) /* 16 bits */ --#define OTP4315_SWREG_SZ 178 /* 178 bytes */ --#define OTP_SZ_FU_144 (144/8) /* 144 bits */ -- --static u16 --ipxotp_otpr(struct otpinfo *oi, uint wn) --{ -- return bcma_read16(oi->core, -- CHIPCREGOFFS(sromotp[wn])); --} -- --/* -- * Calculate max HW/SW region byte size by subtracting fuse region -- * and checksum size, osizew is oi->wsize (OTP size - GU size) in words -- */ --static int ipxotp_max_rgnsz(struct si_pub *sih, int osizew) --{ -- int ret = 0; -- -- switch (ai_get_chip_id(sih)) { -- case BCM43224_CHIP_ID: -- case BCM43225_CHIP_ID: -- ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; -- break; -- case BCM4313_CHIP_ID: -- ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; -- break; -- default: -- break; /* Don't know about this chip */ -- } -- -- return ret; --} -- --static void _ipxotp_init(struct otpinfo *oi) --{ -- uint k; -- u32 otpp, st; -- int ccrev = ai_get_ccrev(oi->sih); -- -- -- /* -- * record word offset of General Use Region -- * for various chipcommon revs -- */ -- if (ccrev == 21 || ccrev == 24 -- || ccrev == 27) { -- oi->otpgu_base = REVA4_OTPGU_BASE; -- } else if (ccrev == 36) { -- /* -- * OTP size greater than equal to 2KB (128 words), -- * otpgu_base is similar to rev23 -- */ -- if (oi->wsize >= 128) -- oi->otpgu_base = REVB8_OTPGU_BASE; -- else -- oi->otpgu_base = REV36_OTPGU_BASE; -- } else if (ccrev == 23 || ccrev >= 25) { -- oi->otpgu_base = REVB8_OTPGU_BASE; -- } -- -- /* First issue an init command so the status is up to date */ -- otpp = -- OTPP_START_BUSY | ((OTPPOC_INIT << OTPP_OC_SHIFT) & OTPP_OC_MASK); -- -- bcma_write32(oi->core, CHIPCREGOFFS(otpprog), otpp); -- st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); -- for (k = 0; (st & OTPP_START_BUSY) && (k < OTPP_TRIES); k++) -- st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); -- if (k >= OTPP_TRIES) -- return; -- -- /* Read OTP lock bits and subregion programmed indication bits */ -- oi->status = bcma_read32(oi->core, CHIPCREGOFFS(otpstatus)); -- -- if ((ai_get_chip_id(oi->sih) == BCM43224_CHIP_ID) -- || (ai_get_chip_id(oi->sih) == BCM43225_CHIP_ID)) { -- u32 p_bits; -- p_bits = (ipxotp_otpr(oi, oi->otpgu_base + OTPGU_P_OFF) & -- OTPGU_P_MSK) >> OTPGU_P_SHIFT; -- oi->status |= (p_bits << OTPS_GUP_SHIFT); -- } -- -- /* -- * h/w region base and fuse region limit are fixed to -- * the top and the bottom of the general use region. -- * Everything else can be flexible. -- */ -- oi->hwbase = oi->otpgu_base + OTPGU_SROM_OFF; -- oi->hwlim = oi->wsize; -- if (oi->status & OTPS_GUP_HW) { -- oi->hwlim = -- ipxotp_otpr(oi, oi->otpgu_base + OTPGU_HSB_OFF) / 16; -- oi->swbase = oi->hwlim; -- } else -- oi->swbase = oi->hwbase; -- -- /* subtract fuse and checksum from beginning */ -- oi->swlim = ipxotp_max_rgnsz(oi->sih, oi->wsize) / 2; -- -- if (oi->status & OTPS_GUP_SW) { -- oi->swlim = -- ipxotp_otpr(oi, oi->otpgu_base + OTPGU_SFB_OFF) / 16; -- oi->fbase = oi->swlim; -- } else -- oi->fbase = oi->swbase; -- -- oi->flim = oi->wsize; --} -- --static int ipxotp_init(struct si_pub *sih, struct otpinfo *oi) --{ -- /* Make sure we're running IPX OTP */ -- if (!OTPTYPE_IPX(ai_get_ccrev(sih))) -- return -EBADE; -- -- /* Make sure OTP is not disabled */ -- if (ai_is_otp_disabled(sih)) -- return -EBADE; -- -- /* Check for otp size */ -- switch ((ai_get_cccaps(sih) & CC_CAP_OTPSIZE) >> CC_CAP_OTPSIZE_SHIFT) { -- case 0: -- /* Nothing there */ -- return -EBADE; -- case 1: /* 32x64 */ -- oi->rows = 32; -- oi->cols = 64; -- oi->wsize = 128; -- break; -- case 2: /* 64x64 */ -- oi->rows = 64; -- oi->cols = 64; -- oi->wsize = 256; -- break; -- case 5: /* 96x64 */ -- oi->rows = 96; -- oi->cols = 64; -- oi->wsize = 384; -- break; -- case 7: /* 16x64 *//* 1024 bits */ -- oi->rows = 16; -- oi->cols = 64; -- oi->wsize = 64; -- break; -- default: -- /* Don't know the geometry */ -- return -EBADE; -- } -- -- /* Retrieve OTP region info */ -- _ipxotp_init(oi); -- return 0; --} -- --static int --ipxotp_read_region(struct otpinfo *oi, int region, u16 *data, uint *wlen) --{ -- uint base, i, sz; -- -- /* Validate region selection */ -- switch (region) { -- case OTP_HW_RGN: -- sz = (uint) oi->hwlim - oi->hwbase; -- if (!(oi->status & OTPS_GUP_HW)) { -- *wlen = sz; -- return -ENODATA; -- } -- if (*wlen < sz) { -- *wlen = sz; -- return -EOVERFLOW; -- } -- base = oi->hwbase; -- break; -- case OTP_SW_RGN: -- sz = ((uint) oi->swlim - oi->swbase); -- if (!(oi->status & OTPS_GUP_SW)) { -- *wlen = sz; -- return -ENODATA; -- } -- if (*wlen < sz) { -- *wlen = sz; -- return -EOVERFLOW; -- } -- base = oi->swbase; -- break; -- case OTP_CI_RGN: -- sz = OTPGU_CI_SZ; -- if (!(oi->status & OTPS_GUP_CI)) { -- *wlen = sz; -- return -ENODATA; -- } -- if (*wlen < sz) { -- *wlen = sz; -- return -EOVERFLOW; -- } -- base = oi->otpgu_base + OTPGU_CI_OFF; -- break; -- case OTP_FUSE_RGN: -- sz = (uint) oi->flim - oi->fbase; -- if (!(oi->status & OTPS_GUP_FUSE)) { -- *wlen = sz; -- return -ENODATA; -- } -- if (*wlen < sz) { -- *wlen = sz; -- return -EOVERFLOW; -- } -- base = oi->fbase; -- break; -- case OTP_ALL_RGN: -- sz = ((uint) oi->flim - oi->hwbase); -- if (!(oi->status & (OTPS_GUP_HW | OTPS_GUP_SW))) { -- *wlen = sz; -- return -ENODATA; -- } -- if (*wlen < sz) { -- *wlen = sz; -- return -EOVERFLOW; -- } -- base = oi->hwbase; -- break; -- default: -- return -EINVAL; -- } -- -- /* Read the data */ -- for (i = 0; i < sz; i++) -- data[i] = ipxotp_otpr(oi, base + i); -- -- *wlen = sz; -- return 0; --} -- --static const struct otp_fn_s ipxotp_fn = { -- (int (*)(struct si_pub *, struct otpinfo *)) ipxotp_init, -- (int (*)(struct otpinfo *, int, u16 *, uint *)) ipxotp_read_region, --}; -- --static int otp_init(struct si_pub *sih, struct otpinfo *oi) --{ -- int ret; -- -- memset(oi, 0, sizeof(struct otpinfo)); -- -- oi->core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); -- -- if (OTPTYPE_IPX(ai_get_ccrev(sih))) -- oi->fn = &ipxotp_fn; -- -- if (oi->fn == NULL) -- return -EBADE; -- -- oi->sih = sih; -- -- ret = (oi->fn->init)(sih, oi); -- -- return ret; --} -- --int --otp_read_region(struct si_pub *sih, int region, u16 *data, uint *wlen) { -- struct otpinfo otpinfo; -- struct otpinfo *oi = &otpinfo; -- int err = 0; -- -- if (ai_is_otp_disabled(sih)) { -- err = -EPERM; -- goto out; -- } -- -- err = otp_init(sih, oi); -- if (err) -- goto out; -- -- err = ((oi)->fn->read_region)(oi, region, data, wlen); -- -- out: -- return err; --} ---- a/drivers/net/wireless/brcm80211/brcmsmac/otp.h -+++ /dev/null -@@ -1,36 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#ifndef _BRCM_OTP_H_ --#define _BRCM_OTP_H_ -- --#include "types.h" -- --/* OTP regions */ --#define OTP_HW_RGN 1 --#define OTP_SW_RGN 2 --#define OTP_CI_RGN 4 --#define OTP_FUSE_RGN 8 --/* From h/w region to end of OTP including checksum */ --#define OTP_ALL_RGN 0xf -- --/* OTP Size */ --#define OTP_SZ_MAX (6144/8) /* maximum bytes in one CIS */ -- --extern int otp_read_region(struct si_pub *sih, int region, u16 *data, -- uint *wlen); -- --#endif /* _BRCM_OTP_H_ */ ---- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c -@@ -4817,28 +4817,23 @@ static bool wlc_phy_txpwr_srom_read_lcnp - s8 txpwr = 0; - int i; - struct brcms_phy_lcnphy *pi_lcn = pi->u.pi_lcnphy; -- struct phy_shim_info *shim = pi->sh->physhim; -+ struct ssb_sprom *sprom = &pi->d11core->bus->sprom; - - if (CHSPEC_IS2G(pi->radio_chanspec)) { - u16 cckpo = 0; - u32 offset_ofdm, offset_mcs; - -- pi_lcn->lcnphy_tr_isolation_mid = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); -+ pi_lcn->lcnphy_tr_isolation_mid = sprom->fem.ghz2.tr_iso; - -- pi_lcn->lcnphy_rx_power_offset = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_RXPO2G); -+ pi_lcn->lcnphy_rx_power_offset = sprom->rxpo2g; - -- pi->txpa_2g[0] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B0); -- pi->txpa_2g[1] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B1); -- pi->txpa_2g[2] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B2); -- -- pi_lcn->lcnphy_rssi_vf = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMF2G); -- pi_lcn->lcnphy_rssi_vc = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMC2G); -- pi_lcn->lcnphy_rssi_gs = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISAV2G); -+ pi->txpa_2g[0] = sprom->pa0b0; -+ pi->txpa_2g[1] = sprom->pa0b1; -+ pi->txpa_2g[2] = sprom->pa0b2; -+ -+ pi_lcn->lcnphy_rssi_vf = sprom->rssismf2g; -+ pi_lcn->lcnphy_rssi_vc = sprom->rssismc2g; -+ pi_lcn->lcnphy_rssi_gs = sprom->rssisav2g; - - pi_lcn->lcnphy_rssi_vf_lowtemp = pi_lcn->lcnphy_rssi_vf; - pi_lcn->lcnphy_rssi_vc_lowtemp = pi_lcn->lcnphy_rssi_vc; -@@ -4848,7 +4843,7 @@ static bool wlc_phy_txpwr_srom_read_lcnp - pi_lcn->lcnphy_rssi_vc_hightemp = pi_lcn->lcnphy_rssi_vc; - pi_lcn->lcnphy_rssi_gs_hightemp = pi_lcn->lcnphy_rssi_gs; - -- txpwr = (s8)wlapi_getintvar(shim, BRCMS_SROM_MAXP2GA0); -+ txpwr = sprom->core_pwr_info[0].maxpwr_2g; - pi->tx_srom_max_2g = txpwr; - - for (i = 0; i < PWRTBL_NUM_COEFF; i++) { -@@ -4856,8 +4851,8 @@ static bool wlc_phy_txpwr_srom_read_lcnp - pi->txpa_2g_high_temp[i] = pi->txpa_2g[i]; - } - -- cckpo = (u16)wlapi_getintvar(shim, BRCMS_SROM_CCK2GPO); -- offset_ofdm = (u32)wlapi_getintvar(shim, BRCMS_SROM_OFDM2GPO); -+ cckpo = sprom->cck2gpo; -+ offset_ofdm = sprom->ofdm2gpo; - if (cckpo) { - uint max_pwr_chan = txpwr; - -@@ -4876,7 +4871,7 @@ static bool wlc_phy_txpwr_srom_read_lcnp - } else { - u8 opo = 0; - -- opo = (u8)wlapi_getintvar(shim, BRCMS_SROM_OPO); -+ opo = sprom->opo; - - for (i = TXP_FIRST_CCK; i <= TXP_LAST_CCK; i++) - pi->tx_srom_max_rate_2g[i] = txpwr; -@@ -4886,12 +4881,8 @@ static bool wlc_phy_txpwr_srom_read_lcnp - ((offset_ofdm & 0xf) * 2); - offset_ofdm >>= 4; - } -- offset_mcs = -- wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO1) << 16; -- offset_mcs |= -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO0); -+ offset_mcs = sprom->mcs2gpo[1] << 16; -+ offset_mcs |= sprom->mcs2gpo[0]; - pi_lcn->lcnphy_mcs20_po = offset_mcs; - for (i = TXP_FIRST_SISO_MCS_20; - i <= TXP_LAST_SISO_MCS_20; i++) { -@@ -4901,25 +4892,17 @@ static bool wlc_phy_txpwr_srom_read_lcnp - } - } - -- pi_lcn->lcnphy_rawtempsense = -- (u16)wlapi_getintvar(shim, BRCMS_SROM_RAWTEMPSENSE); -- pi_lcn->lcnphy_measPower = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_MEASPOWER); -- pi_lcn->lcnphy_tempsense_slope = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_SLOPE); -- pi_lcn->lcnphy_hw_iqcal_en = -- (bool)wlapi_getintvar(shim, BRCMS_SROM_HW_IQCAL_EN); -- pi_lcn->lcnphy_iqcal_swp_dis = -- (bool)wlapi_getintvar(shim, BRCMS_SROM_IQCAL_SWP_DIS); -- pi_lcn->lcnphy_tempcorrx = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPCORRX); -- pi_lcn->lcnphy_tempsense_option = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_OPTION); -- pi_lcn->lcnphy_freqoffset_corr = -- (u8)wlapi_getintvar(shim, BRCMS_SROM_FREQOFFSET_CORR); -- if ((u8)wlapi_getintvar(shim, BRCMS_SROM_AA2G) > 1) -+ pi_lcn->lcnphy_rawtempsense = sprom->rawtempsense; -+ pi_lcn->lcnphy_measPower = sprom->measpower; -+ pi_lcn->lcnphy_tempsense_slope = sprom->tempsense_slope; -+ pi_lcn->lcnphy_hw_iqcal_en = sprom->hw_iqcal_en; -+ pi_lcn->lcnphy_iqcal_swp_dis = sprom->iqcal_swp_dis; -+ pi_lcn->lcnphy_tempcorrx = sprom->tempcorrx; -+ pi_lcn->lcnphy_tempsense_option = sprom->tempsense_option; -+ pi_lcn->lcnphy_freqoffset_corr = sprom->freqoffset_corr; -+ if (sprom->ant_available_bg > 1) - wlc_phy_ant_rxdiv_set((struct brcms_phy_pub *) pi, -- (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G)); -+ sprom->ant_available_bg); - } - pi_lcn->lcnphy_cck_dig_filt_type = -1; - ---- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c -@@ -14388,30 +14388,30 @@ static void wlc_phy_txpwr_srom_read_ppr_ - { - u16 bw40po, cddpo, stbcpo, bwduppo; - uint band_num; -- struct phy_shim_info *shim = pi->sh->physhim; -+ struct ssb_sprom *sprom = &pi->d11core->bus->sprom; - - if (pi->sh->sromrev >= 9) - return; - -- bw40po = (u16) wlapi_getintvar(shim, BRCMS_SROM_BW40PO); -+ bw40po = sprom->bw40po; - pi->bw402gpo = bw40po & 0xf; - pi->bw405gpo = (bw40po & 0xf0) >> 4; - pi->bw405glpo = (bw40po & 0xf00) >> 8; - pi->bw405ghpo = (bw40po & 0xf000) >> 12; - -- cddpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_CDDPO); -+ cddpo = sprom->cddpo; - pi->cdd2gpo = cddpo & 0xf; - pi->cdd5gpo = (cddpo & 0xf0) >> 4; - pi->cdd5glpo = (cddpo & 0xf00) >> 8; - pi->cdd5ghpo = (cddpo & 0xf000) >> 12; - -- stbcpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_STBCPO); -+ stbcpo = sprom->stbcpo; - pi->stbc2gpo = stbcpo & 0xf; - pi->stbc5gpo = (stbcpo & 0xf0) >> 4; - pi->stbc5glpo = (stbcpo & 0xf00) >> 8; - pi->stbc5ghpo = (stbcpo & 0xf000) >> 12; - -- bwduppo = (u16) wlapi_getintvar(shim, BRCMS_SROM_BWDUPPO); -+ bwduppo = sprom->bwduppo; - pi->bwdup2gpo = bwduppo & 0xf; - pi->bwdup5gpo = (bwduppo & 0xf0) >> 4; - pi->bwdup5glpo = (bwduppo & 0xf00) >> 8; -@@ -14421,242 +14421,137 @@ static void wlc_phy_txpwr_srom_read_ppr_ - band_num++) { - switch (band_num) { - case 0: -- - pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_2g = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP2GA0); -+ sprom->core_pwr_info[0].maxpwr_2g; - pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_2g = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP2GA1); -+ sprom->core_pwr_info[1].maxpwr_2g; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW0A0); -+ sprom->core_pwr_info[0].pa_2g[0]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW0A1); -+ sprom->core_pwr_info[1].pa_2g[0]; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW1A0); -+ sprom->core_pwr_info[0].pa_2g[1]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW1A1); -+ sprom->core_pwr_info[1].pa_2g[1]; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW2A0); -+ sprom->core_pwr_info[0].pa_2g[2]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA2GW2A1); -+ sprom->core_pwr_info[1].pa_2g[2]; - pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_2g = -- (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA0); -+ sprom->core_pwr_info[0].itssi_2g; - pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_2g = -- (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA1); -+ sprom->core_pwr_info[1].itssi_2g; -+ -+ pi->cck2gpo = sprom->cck2gpo; - -- pi->cck2gpo = (u16) wlapi_getintvar(shim, -- BRCMS_SROM_CCK2GPO); -+ pi->ofdm2gpo = sprom->ofdm2gpo; - -- pi->ofdm2gpo = -- (u32) wlapi_getintvar(shim, -- BRCMS_SROM_OFDM2GPO); -- -- pi->mcs2gpo[0] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO0); -- pi->mcs2gpo[1] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO1); -- pi->mcs2gpo[2] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO2); -- pi->mcs2gpo[3] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO3); -- pi->mcs2gpo[4] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO4); -- pi->mcs2gpo[5] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO5); -- pi->mcs2gpo[6] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO6); -- pi->mcs2gpo[7] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS2GPO7); -+ pi->mcs2gpo[0] = sprom->mcs2gpo[0]; -+ pi->mcs2gpo[1] = sprom->mcs2gpo[1]; -+ pi->mcs2gpo[2] = sprom->mcs2gpo[2]; -+ pi->mcs2gpo[3] = sprom->mcs2gpo[3]; -+ pi->mcs2gpo[4] = sprom->mcs2gpo[4]; -+ pi->mcs2gpo[5] = sprom->mcs2gpo[5]; -+ pi->mcs2gpo[6] = sprom->mcs2gpo[6]; -+ pi->mcs2gpo[7] = sprom->mcs2gpo[7]; - break; - case 1: - - pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_5gm = -- (s8) wlapi_getintvar(shim, BRCMS_SROM_MAXP5GA0); -+ sprom->core_pwr_info[0].maxpwr_5g; - pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_5gm = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP5GA1); -+ sprom->core_pwr_info[1].maxpwr_5g; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW0A0); -+ sprom->core_pwr_info[0].pa_5g[0]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW0A1); -+ sprom->core_pwr_info[1].pa_5g[0]; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW1A0); -+ sprom->core_pwr_info[0].pa_5g[1]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW1A1); -+ sprom->core_pwr_info[1].pa_5g[1]; - pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW2A0); -+ sprom->core_pwr_info[0].pa_5g[2]; - pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GW2A1); -+ sprom->core_pwr_info[1].pa_5g[2]; - pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_5gm = -- (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA0); -+ sprom->core_pwr_info[0].itssi_5g; - pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_5gm = -- (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA1); -+ sprom->core_pwr_info[1].itssi_5g; -+ -+ pi->ofdm5gpo = sprom->ofdm5gpo; - -- pi->ofdm5gpo = -- (u32) wlapi_getintvar(shim, -- BRCMS_SROM_OFDM5GPO); -- -- pi->mcs5gpo[0] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO0); -- pi->mcs5gpo[1] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO1); -- pi->mcs5gpo[2] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO2); -- pi->mcs5gpo[3] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO3); -- pi->mcs5gpo[4] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO4); -- pi->mcs5gpo[5] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO5); -- pi->mcs5gpo[6] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO6); -- pi->mcs5gpo[7] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GPO7); -+ pi->mcs5gpo[0] = sprom->mcs5gpo[0]; -+ pi->mcs5gpo[1] = sprom->mcs5gpo[1]; -+ pi->mcs5gpo[2] = sprom->mcs5gpo[2]; -+ pi->mcs5gpo[3] = sprom->mcs5gpo[3]; -+ pi->mcs5gpo[4] = sprom->mcs5gpo[4]; -+ pi->mcs5gpo[5] = sprom->mcs5gpo[5]; -+ pi->mcs5gpo[6] = sprom->mcs5gpo[6]; -+ pi->mcs5gpo[7] = sprom->mcs5gpo[7]; - break; - case 2: - - pi->nphy_pwrctrl_info[0].max_pwr_5gl = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP5GLA0); -+ sprom->core_pwr_info[0].maxpwr_5gl; - pi->nphy_pwrctrl_info[1].max_pwr_5gl = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP5GLA1); -+ sprom->core_pwr_info[1].maxpwr_5gl; - pi->nphy_pwrctrl_info[0].pwrdet_5gl_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW0A0); -+ sprom->core_pwr_info[0].pa_5gl[0]; - pi->nphy_pwrctrl_info[1].pwrdet_5gl_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW0A1); -+ sprom->core_pwr_info[1].pa_5gl[0]; - pi->nphy_pwrctrl_info[0].pwrdet_5gl_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW1A0); -+ sprom->core_pwr_info[0].pa_5gl[1]; - pi->nphy_pwrctrl_info[1].pwrdet_5gl_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW1A1); -+ sprom->core_pwr_info[1].pa_5gl[1]; - pi->nphy_pwrctrl_info[0].pwrdet_5gl_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW2A0); -+ sprom->core_pwr_info[0].pa_5gl[2]; - pi->nphy_pwrctrl_info[1].pwrdet_5gl_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GLW2A1); -+ sprom->core_pwr_info[1].pa_5gl[2]; - pi->nphy_pwrctrl_info[0].idle_targ_5gl = 0; - pi->nphy_pwrctrl_info[1].idle_targ_5gl = 0; - -- pi->ofdm5glpo = -- (u32) wlapi_getintvar(shim, -- BRCMS_SROM_OFDM5GLPO); -- -- pi->mcs5glpo[0] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO0); -- pi->mcs5glpo[1] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO1); -- pi->mcs5glpo[2] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO2); -- pi->mcs5glpo[3] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO3); -- pi->mcs5glpo[4] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO4); -- pi->mcs5glpo[5] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO5); -- pi->mcs5glpo[6] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO6); -- pi->mcs5glpo[7] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GLPO7); -+ pi->ofdm5glpo = sprom->ofdm5glpo; -+ -+ pi->mcs5glpo[0] = sprom->mcs5glpo[0]; -+ pi->mcs5glpo[1] = sprom->mcs5glpo[1]; -+ pi->mcs5glpo[2] = sprom->mcs5glpo[2]; -+ pi->mcs5glpo[3] = sprom->mcs5glpo[3]; -+ pi->mcs5glpo[4] = sprom->mcs5glpo[4]; -+ pi->mcs5glpo[5] = sprom->mcs5glpo[5]; -+ pi->mcs5glpo[6] = sprom->mcs5glpo[6]; -+ pi->mcs5glpo[7] = sprom->mcs5glpo[7]; - break; - case 3: - - pi->nphy_pwrctrl_info[0].max_pwr_5gh = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP5GHA0); -+ sprom->core_pwr_info[0].maxpwr_5gh; - pi->nphy_pwrctrl_info[1].max_pwr_5gh = -- (s8) wlapi_getintvar(shim, -- BRCMS_SROM_MAXP5GHA1); -+ sprom->core_pwr_info[1].maxpwr_5gh; - pi->nphy_pwrctrl_info[0].pwrdet_5gh_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW0A0); -+ sprom->core_pwr_info[0].pa_5gh[0]; - pi->nphy_pwrctrl_info[1].pwrdet_5gh_a1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW0A1); -+ sprom->core_pwr_info[1].pa_5gh[0]; - pi->nphy_pwrctrl_info[0].pwrdet_5gh_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW1A0); -+ sprom->core_pwr_info[0].pa_5gh[1]; - pi->nphy_pwrctrl_info[1].pwrdet_5gh_b0 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW1A1); -+ sprom->core_pwr_info[1].pa_5gh[1]; - pi->nphy_pwrctrl_info[0].pwrdet_5gh_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW2A0); -+ sprom->core_pwr_info[0].pa_5gh[2]; - pi->nphy_pwrctrl_info[1].pwrdet_5gh_b1 = -- (s16) wlapi_getintvar(shim, -- BRCMS_SROM_PA5GHW2A1); -+ sprom->core_pwr_info[1].pa_5gh[2]; - pi->nphy_pwrctrl_info[0].idle_targ_5gh = 0; - pi->nphy_pwrctrl_info[1].idle_targ_5gh = 0; - -- pi->ofdm5ghpo = -- (u32) wlapi_getintvar(shim, -- BRCMS_SROM_OFDM5GHPO); -- -- pi->mcs5ghpo[0] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO0); -- pi->mcs5ghpo[1] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO1); -- pi->mcs5ghpo[2] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO2); -- pi->mcs5ghpo[3] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO3); -- pi->mcs5ghpo[4] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO4); -- pi->mcs5ghpo[5] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO5); -- pi->mcs5ghpo[6] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO6); -- pi->mcs5ghpo[7] = -- (u16) wlapi_getintvar(shim, -- BRCMS_SROM_MCS5GHPO7); -+ pi->ofdm5ghpo = sprom->ofdm5ghpo; -+ -+ pi->mcs5ghpo[0] = sprom->mcs5ghpo[0]; -+ pi->mcs5ghpo[1] = sprom->mcs5ghpo[1]; -+ pi->mcs5ghpo[2] = sprom->mcs5ghpo[2]; -+ pi->mcs5ghpo[3] = sprom->mcs5ghpo[3]; -+ pi->mcs5ghpo[4] = sprom->mcs5ghpo[4]; -+ pi->mcs5ghpo[5] = sprom->mcs5ghpo[5]; -+ pi->mcs5ghpo[6] = sprom->mcs5ghpo[6]; -+ pi->mcs5ghpo[7] = sprom->mcs5ghpo[7]; - break; - } - } -@@ -14666,45 +14561,34 @@ static void wlc_phy_txpwr_srom_read_ppr_ - - static bool wlc_phy_txpwr_srom_read_nphy(struct brcms_phy *pi) - { -- struct phy_shim_info *shim = pi->sh->physhim; -+ struct ssb_sprom *sprom = &pi->d11core->bus->sprom; - -- pi->antswitch = (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWITCH); -- pi->aa2g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G); -- pi->aa5g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA5G); -- -- pi->srom_fem2g.tssipos = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_TSSIPOS2G); -- pi->srom_fem2g.extpagain = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_EXTPAGAIN2G); -- pi->srom_fem2g.pdetrange = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_PDETRANGE2G); -- pi->srom_fem2g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); -- pi->srom_fem2g.antswctrllut = -- (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); -- -- pi->srom_fem5g.tssipos = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_TSSIPOS5G); -- pi->srom_fem5g.extpagain = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_EXTPAGAIN5G); -- pi->srom_fem5g.pdetrange = (u8) wlapi_getintvar(shim, -- BRCMS_SROM_PDETRANGE5G); -- pi->srom_fem5g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO5G); -- if (wlapi_getvar(shim, BRCMS_SROM_ANTSWCTL5G)) -- pi->srom_fem5g.antswctrllut = -- (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL5G); -+ pi->antswitch = sprom->antswitch; -+ pi->aa2g = sprom->ant_available_bg; -+ pi->aa5g = sprom->ant_available_a; -+ -+ pi->srom_fem2g.tssipos = sprom->fem.ghz2.tssipos; -+ pi->srom_fem2g.extpagain = sprom->fem.ghz2.extpa_gain; -+ pi->srom_fem2g.pdetrange = sprom->fem.ghz2.pdet_range; -+ pi->srom_fem2g.triso = sprom->fem.ghz2.tr_iso; -+ pi->srom_fem2g.antswctrllut = sprom->fem.ghz2.antswlut; -+ -+ pi->srom_fem5g.tssipos = sprom->fem.ghz5.tssipos; -+ pi->srom_fem5g.extpagain = sprom->fem.ghz5.extpa_gain; -+ pi->srom_fem5g.pdetrange = sprom->fem.ghz5.pdet_range; -+ pi->srom_fem5g.triso = sprom->fem.ghz5.tr_iso; -+ if (sprom->fem.ghz5.antswlut) -+ pi->srom_fem5g.antswctrllut = sprom->fem.ghz5.antswlut; - else -- pi->srom_fem5g.antswctrllut = -- (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); -+ pi->srom_fem5g.antswctrllut = sprom->fem.ghz2.antswlut; - - wlc_phy_txpower_ipa_upd(pi); - -- pi->phy_txcore_disable_temp = -- (s16) wlapi_getintvar(shim, BRCMS_SROM_TEMPTHRESH); -+ pi->phy_txcore_disable_temp = sprom->tempthresh; - if (pi->phy_txcore_disable_temp == 0) - pi->phy_txcore_disable_temp = PHY_CHAIN_TX_DISABLE_TEMP; - -- pi->phy_tempsense_offset = (s8) wlapi_getintvar(shim, -- BRCMS_SROM_TEMPOFFSET); -+ pi->phy_tempsense_offset = sprom->tempoffset; - if (pi->phy_tempsense_offset != 0) { - if (pi->phy_tempsense_offset > - (NPHY_SROM_TEMPSHIFT + NPHY_SROM_MAXTEMPOFFSET)) -@@ -14719,8 +14603,7 @@ static bool wlc_phy_txpwr_srom_read_nphy - pi->phy_txcore_enable_temp = - pi->phy_txcore_disable_temp - PHY_HYSTERESIS_DELTATEMP; - -- pi->phycal_tempdelta = -- (u8) wlapi_getintvar(shim, BRCMS_SROM_PHYCAL_TEMPDELTA); -+ pi->phycal_tempdelta = sprom->phycal_tempdelta; - if (pi->phycal_tempdelta > NPHY_CAL_MAXTEMPDELTA) - pi->phycal_tempdelta = 0; - -@@ -21462,7 +21345,7 @@ void wlc_phy_antsel_init(struct brcms_ph - write_phy_reg(pi, 0xc8, 0x0); - write_phy_reg(pi, 0xc9, 0x0); - -- ai_gpiocontrol(pi->sh->sih, mask, mask, GPIO_DRV_PRIORITY); -+ bcma_chipco_gpio_control(&pi->d11core->bus->drv_cc, mask, mask); - - mc = bcma_read32(pi->d11core, D11REGOFFS(maccontrol)); - mc &= ~MCTL_GPOUT_SEL_MASK; ---- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c -@@ -214,12 +214,3 @@ wlapi_copyto_objmem(struct phy_shim_info - { - brcms_b_copyto_objmem(physhim->wlc_hw, offset, buf, l, sel); - } -- --char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id) --{ -- return getvar(physhim->wlc_hw->sih, id); --} --int wlapi_getintvar(struct phy_shim_info *physhim, enum brcms_srom_id id) --{ -- return getintvar(physhim->wlc_hw->sih, id); --} ---- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h -+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h -@@ -175,8 +175,5 @@ extern void wlapi_copyto_objmem(struct p - extern void wlapi_high_update_phy_mode(struct phy_shim_info *physhim, - u32 phy_mode); - extern u16 wlapi_bmac_get_txant(struct phy_shim_info *physhim); --extern char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id); --extern int wlapi_getintvar(struct phy_shim_info *physhim, -- enum brcms_srom_id id); - - #endif /* _BRCM_PHY_SHIM_H_ */ ---- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h -+++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h -@@ -22,232 +22,6 @@ - #include "types.h" - #include "defs.h" - --enum brcms_srom_id { -- BRCMS_SROM_NULL, -- BRCMS_SROM_CONT, -- BRCMS_SROM_AA2G, -- BRCMS_SROM_AA5G, -- BRCMS_SROM_AG0, -- BRCMS_SROM_AG1, -- BRCMS_SROM_AG2, -- BRCMS_SROM_AG3, -- BRCMS_SROM_ANTSWCTL2G, -- BRCMS_SROM_ANTSWCTL5G, -- BRCMS_SROM_ANTSWITCH, -- BRCMS_SROM_BOARDFLAGS2, -- BRCMS_SROM_BOARDFLAGS, -- BRCMS_SROM_BOARDNUM, -- BRCMS_SROM_BOARDREV, -- BRCMS_SROM_BOARDTYPE, -- BRCMS_SROM_BW40PO, -- BRCMS_SROM_BWDUPPO, -- BRCMS_SROM_BXA2G, -- BRCMS_SROM_BXA5G, -- BRCMS_SROM_CC, -- BRCMS_SROM_CCK2GPO, -- BRCMS_SROM_CCKBW202GPO, -- BRCMS_SROM_CCKBW20UL2GPO, -- BRCMS_SROM_CCODE, -- BRCMS_SROM_CDDPO, -- BRCMS_SROM_DEVID, -- BRCMS_SROM_ET1MACADDR, -- BRCMS_SROM_EXTPAGAIN2G, -- BRCMS_SROM_EXTPAGAIN5G, -- BRCMS_SROM_FREQOFFSET_CORR, -- BRCMS_SROM_HW_IQCAL_EN, -- BRCMS_SROM_IL0MACADDR, -- BRCMS_SROM_IQCAL_SWP_DIS, -- BRCMS_SROM_LEDBH0, -- BRCMS_SROM_LEDBH1, -- BRCMS_SROM_LEDBH2, -- BRCMS_SROM_LEDBH3, -- BRCMS_SROM_LEDDC, -- BRCMS_SROM_LEGOFDM40DUPPO, -- BRCMS_SROM_LEGOFDMBW202GPO, -- BRCMS_SROM_LEGOFDMBW205GHPO, -- BRCMS_SROM_LEGOFDMBW205GLPO, -- BRCMS_SROM_LEGOFDMBW205GMPO, -- BRCMS_SROM_LEGOFDMBW20UL2GPO, -- BRCMS_SROM_LEGOFDMBW20UL5GHPO, -- BRCMS_SROM_LEGOFDMBW20UL5GLPO, -- BRCMS_SROM_LEGOFDMBW20UL5GMPO, -- BRCMS_SROM_MACADDR, -- BRCMS_SROM_MCS2GPO0, -- BRCMS_SROM_MCS2GPO1, -- BRCMS_SROM_MCS2GPO2, -- BRCMS_SROM_MCS2GPO3, -- BRCMS_SROM_MCS2GPO4, -- BRCMS_SROM_MCS2GPO5, -- BRCMS_SROM_MCS2GPO6, -- BRCMS_SROM_MCS2GPO7, -- BRCMS_SROM_MCS32PO, -- BRCMS_SROM_MCS5GHPO0, -- BRCMS_SROM_MCS5GHPO1, -- BRCMS_SROM_MCS5GHPO2, -- BRCMS_SROM_MCS5GHPO3, -- BRCMS_SROM_MCS5GHPO4, -- BRCMS_SROM_MCS5GHPO5, -- BRCMS_SROM_MCS5GHPO6, -- BRCMS_SROM_MCS5GHPO7, -- BRCMS_SROM_MCS5GLPO0, -- BRCMS_SROM_MCS5GLPO1, -- BRCMS_SROM_MCS5GLPO2, -- BRCMS_SROM_MCS5GLPO3, -- BRCMS_SROM_MCS5GLPO4, -- BRCMS_SROM_MCS5GLPO5, -- BRCMS_SROM_MCS5GLPO6, -- BRCMS_SROM_MCS5GLPO7, -- BRCMS_SROM_MCS5GPO0, -- BRCMS_SROM_MCS5GPO1, -- BRCMS_SROM_MCS5GPO2, -- BRCMS_SROM_MCS5GPO3, -- BRCMS_SROM_MCS5GPO4, -- BRCMS_SROM_MCS5GPO5, -- BRCMS_SROM_MCS5GPO6, -- BRCMS_SROM_MCS5GPO7, -- BRCMS_SROM_MCSBW202GPO, -- BRCMS_SROM_MCSBW205GHPO, -- BRCMS_SROM_MCSBW205GLPO, -- BRCMS_SROM_MCSBW205GMPO, -- BRCMS_SROM_MCSBW20UL2GPO, -- BRCMS_SROM_MCSBW20UL5GHPO, -- BRCMS_SROM_MCSBW20UL5GLPO, -- BRCMS_SROM_MCSBW20UL5GMPO, -- BRCMS_SROM_MCSBW402GPO, -- BRCMS_SROM_MCSBW405GHPO, -- BRCMS_SROM_MCSBW405GLPO, -- BRCMS_SROM_MCSBW405GMPO, -- BRCMS_SROM_MEASPOWER, -- BRCMS_SROM_OFDM2GPO, -- BRCMS_SROM_OFDM5GHPO, -- BRCMS_SROM_OFDM5GLPO, -- BRCMS_SROM_OFDM5GPO, -- BRCMS_SROM_OPO, -- BRCMS_SROM_PA0B0, -- BRCMS_SROM_PA0B1, -- BRCMS_SROM_PA0B2, -- BRCMS_SROM_PA0ITSSIT, -- BRCMS_SROM_PA0MAXPWR, -- BRCMS_SROM_PA1B0, -- BRCMS_SROM_PA1B1, -- BRCMS_SROM_PA1B2, -- BRCMS_SROM_PA1HIB0, -- BRCMS_SROM_PA1HIB1, -- BRCMS_SROM_PA1HIB2, -- BRCMS_SROM_PA1HIMAXPWR, -- BRCMS_SROM_PA1ITSSIT, -- BRCMS_SROM_PA1LOB0, -- BRCMS_SROM_PA1LOB1, -- BRCMS_SROM_PA1LOB2, -- BRCMS_SROM_PA1LOMAXPWR, -- BRCMS_SROM_PA1MAXPWR, -- BRCMS_SROM_PDETRANGE2G, -- BRCMS_SROM_PDETRANGE5G, -- BRCMS_SROM_PHYCAL_TEMPDELTA, -- BRCMS_SROM_RAWTEMPSENSE, -- BRCMS_SROM_REGREV, -- BRCMS_SROM_REV, -- BRCMS_SROM_RSSISAV2G, -- BRCMS_SROM_RSSISAV5G, -- BRCMS_SROM_RSSISMC2G, -- BRCMS_SROM_RSSISMC5G, -- BRCMS_SROM_RSSISMF2G, -- BRCMS_SROM_RSSISMF5G, -- BRCMS_SROM_RXCHAIN, -- BRCMS_SROM_RXPO2G, -- BRCMS_SROM_RXPO5G, -- BRCMS_SROM_STBCPO, -- BRCMS_SROM_TEMPCORRX, -- BRCMS_SROM_TEMPOFFSET, -- BRCMS_SROM_TEMPSENSE_OPTION, -- BRCMS_SROM_TEMPSENSE_SLOPE, -- BRCMS_SROM_TEMPTHRESH, -- BRCMS_SROM_TRI2G, -- BRCMS_SROM_TRI5GH, -- BRCMS_SROM_TRI5GL, -- BRCMS_SROM_TRI5G, -- BRCMS_SROM_TRISO2G, -- BRCMS_SROM_TRISO5G, -- BRCMS_SROM_TSSIPOS2G, -- BRCMS_SROM_TSSIPOS5G, -- BRCMS_SROM_TXCHAIN, -- /* -- * per-path identifiers (see srom.c) -- */ -- BRCMS_SROM_ITT2GA0, -- BRCMS_SROM_ITT2GA1, -- BRCMS_SROM_ITT2GA2, -- BRCMS_SROM_ITT2GA3, -- BRCMS_SROM_ITT5GA0, -- BRCMS_SROM_ITT5GA1, -- BRCMS_SROM_ITT5GA2, -- BRCMS_SROM_ITT5GA3, -- BRCMS_SROM_MAXP2GA0, -- BRCMS_SROM_MAXP2GA1, -- BRCMS_SROM_MAXP2GA2, -- BRCMS_SROM_MAXP2GA3, -- BRCMS_SROM_MAXP5GA0, -- BRCMS_SROM_MAXP5GA1, -- BRCMS_SROM_MAXP5GA2, -- BRCMS_SROM_MAXP5GA3, -- BRCMS_SROM_MAXP5GHA0, -- BRCMS_SROM_MAXP5GHA1, -- BRCMS_SROM_MAXP5GHA2, -- BRCMS_SROM_MAXP5GHA3, -- BRCMS_SROM_MAXP5GLA0, -- BRCMS_SROM_MAXP5GLA1, -- BRCMS_SROM_MAXP5GLA2, -- BRCMS_SROM_MAXP5GLA3, -- BRCMS_SROM_PA2GW0A0, -- BRCMS_SROM_PA2GW0A1, -- BRCMS_SROM_PA2GW0A2, -- BRCMS_SROM_PA2GW0A3, -- BRCMS_SROM_PA2GW1A0, -- BRCMS_SROM_PA2GW1A1, -- BRCMS_SROM_PA2GW1A2, -- BRCMS_SROM_PA2GW1A3, -- BRCMS_SROM_PA2GW2A0, -- BRCMS_SROM_PA2GW2A1, -- BRCMS_SROM_PA2GW2A2, -- BRCMS_SROM_PA2GW2A3, -- BRCMS_SROM_PA5GHW0A0, -- BRCMS_SROM_PA5GHW0A1, -- BRCMS_SROM_PA5GHW0A2, -- BRCMS_SROM_PA5GHW0A3, -- BRCMS_SROM_PA5GHW1A0, -- BRCMS_SROM_PA5GHW1A1, -- BRCMS_SROM_PA5GHW1A2, -- BRCMS_SROM_PA5GHW1A3, -- BRCMS_SROM_PA5GHW2A0, -- BRCMS_SROM_PA5GHW2A1, -- BRCMS_SROM_PA5GHW2A2, -- BRCMS_SROM_PA5GHW2A3, -- BRCMS_SROM_PA5GLW0A0, -- BRCMS_SROM_PA5GLW0A1, -- BRCMS_SROM_PA5GLW0A2, -- BRCMS_SROM_PA5GLW0A3, -- BRCMS_SROM_PA5GLW1A0, -- BRCMS_SROM_PA5GLW1A1, -- BRCMS_SROM_PA5GLW1A2, -- BRCMS_SROM_PA5GLW1A3, -- BRCMS_SROM_PA5GLW2A0, -- BRCMS_SROM_PA5GLW2A1, -- BRCMS_SROM_PA5GLW2A2, -- BRCMS_SROM_PA5GLW2A3, -- BRCMS_SROM_PA5GW0A0, -- BRCMS_SROM_PA5GW0A1, -- BRCMS_SROM_PA5GW0A2, -- BRCMS_SROM_PA5GW0A3, -- BRCMS_SROM_PA5GW1A0, -- BRCMS_SROM_PA5GW1A1, -- BRCMS_SROM_PA5GW1A2, -- BRCMS_SROM_PA5GW1A3, -- BRCMS_SROM_PA5GW2A0, -- BRCMS_SROM_PA5GW2A1, -- BRCMS_SROM_PA5GW2A2, -- BRCMS_SROM_PA5GW2A3, --}; -- - #define BRCMS_NUMRATES 16 /* max # of rates in a rateset */ - - /* phy types */ -@@ -565,8 +339,6 @@ extern void brcms_c_ampdu_flush(struct b - struct ieee80211_sta *sta, u16 tid); - extern void brcms_c_ampdu_tx_operational(struct brcms_c_info *wlc, u8 tid, - u8 ba_wsize, uint max_rx_ampdu_bytes); --extern char *getvar(struct si_pub *sih, enum brcms_srom_id id); --extern int getintvar(struct si_pub *sih, enum brcms_srom_id id); - extern int brcms_c_module_register(struct brcms_pub *pub, - const char *name, struct brcms_info *hdl, - int (*down_fn)(void *handle)); ---- a/drivers/net/wireless/brcm80211/brcmsmac/srom.c -+++ /dev/null -@@ -1,980 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#include <linux/kernel.h> --#include <linux/string.h> --#include <linux/io.h> --#include <linux/etherdevice.h> --#include <linux/crc8.h> --#include <stdarg.h> -- --#include <chipcommon.h> --#include <brcmu_utils.h> --#include "pub.h" --#include "nicpci.h" --#include "aiutils.h" --#include "otp.h" --#include "srom.h" --#include "soc.h" -- --/* -- * SROM CRC8 polynomial value: -- * -- * x^8 + x^7 +x^6 + x^4 + x^2 + 1 -- */ --#define SROM_CRC8_POLY 0xAB -- --/* Maximum srom: 6 Kilobits == 768 bytes */ --#define SROM_MAX 768 -- --/* PCI fields */ --#define PCI_F0DEVID 48 -- --#define SROM_WORDS 64 -- --#define SROM_SSID 2 -- --#define SROM_WL1LHMAXP 29 -- --#define SROM_WL1LPAB0 30 --#define SROM_WL1LPAB1 31 --#define SROM_WL1LPAB2 32 -- --#define SROM_WL1HPAB0 33 --#define SROM_WL1HPAB1 34 --#define SROM_WL1HPAB2 35 -- --#define SROM_MACHI_IL0 36 --#define SROM_MACMID_IL0 37 --#define SROM_MACLO_IL0 38 --#define SROM_MACHI_ET1 42 --#define SROM_MACMID_ET1 43 --#define SROM_MACLO_ET1 44 -- --#define SROM_BXARSSI2G 40 --#define SROM_BXARSSI5G 41 -- --#define SROM_TRI52G 42 --#define SROM_TRI5GHL 43 -- --#define SROM_RXPO52G 45 -- --#define SROM_AABREV 46 --/* Fields in AABREV */ --#define SROM_BR_MASK 0x00ff --#define SROM_CC_MASK 0x0f00 --#define SROM_CC_SHIFT 8 --#define SROM_AA0_MASK 0x3000 --#define SROM_AA0_SHIFT 12 --#define SROM_AA1_MASK 0xc000 --#define SROM_AA1_SHIFT 14 -- --#define SROM_WL0PAB0 47 --#define SROM_WL0PAB1 48 --#define SROM_WL0PAB2 49 -- --#define SROM_LEDBH10 50 --#define SROM_LEDBH32 51 -- --#define SROM_WL10MAXP 52 -- --#define SROM_WL1PAB0 53 --#define SROM_WL1PAB1 54 --#define SROM_WL1PAB2 55 -- --#define SROM_ITT 56 -- --#define SROM_BFL 57 --#define SROM_BFL2 28 -- --#define SROM_AG10 58 -- --#define SROM_CCODE 59 -- --#define SROM_OPO 60 -- --#define SROM_CRCREV 63 -- --#define SROM4_WORDS 220 -- --#define SROM4_TXCHAIN_MASK 0x000f --#define SROM4_RXCHAIN_MASK 0x00f0 --#define SROM4_SWITCH_MASK 0xff00 -- --/* Per-path fields */ --#define MAX_PATH_SROM 4 -- --#define SROM4_CRCREV 219 -- --/* SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6. -- * This is acombined srom for both MIMO and SISO boards, usable in -- * the .130 4Kilobit OTP with hardware redundancy. -- */ --#define SROM8_BREV 65 -- --#define SROM8_BFL0 66 --#define SROM8_BFL1 67 --#define SROM8_BFL2 68 --#define SROM8_BFL3 69 -- --#define SROM8_MACHI 70 --#define SROM8_MACMID 71 --#define SROM8_MACLO 72 -- --#define SROM8_CCODE 73 --#define SROM8_REGREV 74 -- --#define SROM8_LEDBH10 75 --#define SROM8_LEDBH32 76 -- --#define SROM8_LEDDC 77 -- --#define SROM8_AA 78 -- --#define SROM8_AG10 79 --#define SROM8_AG32 80 -- --#define SROM8_TXRXC 81 -- --#define SROM8_BXARSSI2G 82 --#define SROM8_BXARSSI5G 83 --#define SROM8_TRI52G 84 --#define SROM8_TRI5GHL 85 --#define SROM8_RXPO52G 86 -- --#define SROM8_FEM2G 87 --#define SROM8_FEM5G 88 --#define SROM8_FEM_ANTSWLUT_MASK 0xf800 --#define SROM8_FEM_ANTSWLUT_SHIFT 11 --#define SROM8_FEM_TR_ISO_MASK 0x0700 --#define SROM8_FEM_TR_ISO_SHIFT 8 --#define SROM8_FEM_PDET_RANGE_MASK 0x00f8 --#define SROM8_FEM_PDET_RANGE_SHIFT 3 --#define SROM8_FEM_EXTPA_GAIN_MASK 0x0006 --#define SROM8_FEM_EXTPA_GAIN_SHIFT 1 --#define SROM8_FEM_TSSIPOS_MASK 0x0001 --#define SROM8_FEM_TSSIPOS_SHIFT 0 -- --#define SROM8_THERMAL 89 -- --/* Temp sense related entries */ --#define SROM8_MPWR_RAWTS 90 --#define SROM8_TS_SLP_OPT_CORRX 91 --/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, -- * IQSWP: IQ CAL swap disable */ --#define SROM8_FOC_HWIQ_IQSWP 92 -- --/* Temperature delta for PHY calibration */ --#define SROM8_PHYCAL_TEMPDELTA 93 -- --/* Per-path offsets & fields */ --#define SROM8_PATH0 96 --#define SROM8_PATH1 112 --#define SROM8_PATH2 128 --#define SROM8_PATH3 144 -- --#define SROM8_2G_ITT_MAXP 0 --#define SROM8_2G_PA 1 --#define SROM8_5G_ITT_MAXP 4 --#define SROM8_5GLH_MAXP 5 --#define SROM8_5G_PA 6 --#define SROM8_5GL_PA 9 --#define SROM8_5GH_PA 12 -- --/* All the miriad power offsets */ --#define SROM8_2G_CCKPO 160 -- --#define SROM8_2G_OFDMPO 161 --#define SROM8_5G_OFDMPO 163 --#define SROM8_5GL_OFDMPO 165 --#define SROM8_5GH_OFDMPO 167 -- --#define SROM8_2G_MCSPO 169 --#define SROM8_5G_MCSPO 177 --#define SROM8_5GL_MCSPO 185 --#define SROM8_5GH_MCSPO 193 -- --#define SROM8_CDDPO 201 --#define SROM8_STBCPO 202 --#define SROM8_BW40PO 203 --#define SROM8_BWDUPPO 204 -- --/* SISO PA parameters are in the path0 spaces */ --#define SROM8_SISO 96 -- --/* Legacy names for SISO PA paramters */ --#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP) --#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA) --#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1) --#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2) --#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP) --#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP) --#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA) --#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1) --#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2) --#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA) --#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1) --#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2) --#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA) --#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1) --#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2) -- --/* SROM REV 9 */ --#define SROM9_2GPO_CCKBW20 160 --#define SROM9_2GPO_CCKBW20UL 161 --#define SROM9_2GPO_LOFDMBW20 162 --#define SROM9_2GPO_LOFDMBW20UL 164 -- --#define SROM9_5GLPO_LOFDMBW20 166 --#define SROM9_5GLPO_LOFDMBW20UL 168 --#define SROM9_5GMPO_LOFDMBW20 170 --#define SROM9_5GMPO_LOFDMBW20UL 172 --#define SROM9_5GHPO_LOFDMBW20 174 --#define SROM9_5GHPO_LOFDMBW20UL 176 -- --#define SROM9_2GPO_MCSBW20 178 --#define SROM9_2GPO_MCSBW20UL 180 --#define SROM9_2GPO_MCSBW40 182 -- --#define SROM9_5GLPO_MCSBW20 184 --#define SROM9_5GLPO_MCSBW20UL 186 --#define SROM9_5GLPO_MCSBW40 188 --#define SROM9_5GMPO_MCSBW20 190 --#define SROM9_5GMPO_MCSBW20UL 192 --#define SROM9_5GMPO_MCSBW40 194 --#define SROM9_5GHPO_MCSBW20 196 --#define SROM9_5GHPO_MCSBW20UL 198 --#define SROM9_5GHPO_MCSBW40 200 -- --#define SROM9_PO_MCS32 202 --#define SROM9_PO_LOFDM40DUP 203 -- --/* SROM flags (see sromvar_t) */ -- --/* value continues as described by the next entry */ --#define SRFL_MORE 1 --#define SRFL_NOFFS 2 /* value bits can't be all one's */ --#define SRFL_PRHEX 4 /* value is in hexdecimal format */ --#define SRFL_PRSIGN 8 /* value is in signed decimal format */ --#define SRFL_CCODE 0x10 /* value is in country code format */ --#define SRFL_ETHADDR 0x20 /* value is an Ethernet address */ --#define SRFL_LEDDC 0x40 /* value is an LED duty cycle */ --/* do not generate a nvram param, entry is for mfgc */ --#define SRFL_NOVAR 0x80 -- --/* Max. nvram variable table size */ --#define MAXSZ_NVRAM_VARS 4096 -- --/* -- * indicates type of value. -- */ --enum brcms_srom_var_type { -- BRCMS_SROM_STRING, -- BRCMS_SROM_SNUMBER, -- BRCMS_SROM_UNUMBER --}; -- --/* -- * storage type for srom variable. -- * -- * var_list: for linked list operations. -- * varid: identifier of the variable. -- * var_type: type of variable. -- * buf: variable value when var_type == BRCMS_SROM_STRING. -- * uval: unsigned variable value when var_type == BRCMS_SROM_UNUMBER. -- * sval: signed variable value when var_type == BRCMS_SROM_SNUMBER. -- */ --struct brcms_srom_list_head { -- struct list_head var_list; -- enum brcms_srom_id varid; -- enum brcms_srom_var_type var_type; -- union { -- char buf[0]; -- u32 uval; -- s32 sval; -- }; --}; -- --struct brcms_sromvar { -- enum brcms_srom_id varid; -- u32 revmask; -- u32 flags; -- u16 off; -- u16 mask; --}; -- --struct brcms_varbuf { -- char *base; /* pointer to buffer base */ -- char *buf; /* pointer to current position */ -- unsigned int size; /* current (residual) size in bytes */ --}; -- --/* -- * Assumptions: -- * - Ethernet address spans across 3 consecutive words -- * -- * Table rules: -- * - Add multiple entries next to each other if a value spans across multiple -- * words (even multiple fields in the same word) with each entry except the -- * last having it's SRFL_MORE bit set. -- * - Ethernet address entry does not follow above rule and must not have -- * SRFL_MORE bit set. Its SRFL_ETHADDR bit implies it takes multiple words. -- * - The last entry's name field must be NULL to indicate the end of the table. -- * Other entries must have non-NULL name. -- */ --static const struct brcms_sromvar pci_sromvars[] = { -- {BRCMS_SROM_DEVID, 0xffffff00, SRFL_PRHEX | SRFL_NOVAR, PCI_F0DEVID, -- 0xffff}, -- {BRCMS_SROM_BOARDREV, 0xffffff00, SRFL_PRHEX, SROM8_BREV, 0xffff}, -- {BRCMS_SROM_BOARDFLAGS, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL0, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_BFL1, 0xffff}, -- {BRCMS_SROM_BOARDFLAGS2, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL2, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_BFL3, 0xffff}, -- {BRCMS_SROM_BOARDTYPE, 0xfffffffc, SRFL_PRHEX, SROM_SSID, 0xffff}, -- {BRCMS_SROM_BOARDNUM, 0xffffff00, 0, SROM8_MACLO, 0xffff}, -- {BRCMS_SROM_REGREV, 0xffffff00, 0, SROM8_REGREV, 0x00ff}, -- {BRCMS_SROM_LEDBH0, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0x00ff}, -- {BRCMS_SROM_LEDBH1, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0xff00}, -- {BRCMS_SROM_LEDBH2, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0x00ff}, -- {BRCMS_SROM_LEDBH3, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0xff00}, -- {BRCMS_SROM_PA0B0, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB0, 0xffff}, -- {BRCMS_SROM_PA0B1, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB1, 0xffff}, -- {BRCMS_SROM_PA0B2, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB2, 0xffff}, -- {BRCMS_SROM_PA0ITSSIT, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0xff00}, -- {BRCMS_SROM_PA0MAXPWR, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0x00ff}, -- {BRCMS_SROM_OPO, 0xffffff00, 0, SROM8_2G_OFDMPO, 0x00ff}, -- {BRCMS_SROM_AA2G, 0xffffff00, 0, SROM8_AA, 0x00ff}, -- {BRCMS_SROM_AA5G, 0xffffff00, 0, SROM8_AA, 0xff00}, -- {BRCMS_SROM_AG0, 0xffffff00, 0, SROM8_AG10, 0x00ff}, -- {BRCMS_SROM_AG1, 0xffffff00, 0, SROM8_AG10, 0xff00}, -- {BRCMS_SROM_AG2, 0xffffff00, 0, SROM8_AG32, 0x00ff}, -- {BRCMS_SROM_AG3, 0xffffff00, 0, SROM8_AG32, 0xff00}, -- {BRCMS_SROM_PA1B0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0, 0xffff}, -- {BRCMS_SROM_PA1B1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1, 0xffff}, -- {BRCMS_SROM_PA1B2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2, 0xffff}, -- {BRCMS_SROM_PA1LOB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_LC, 0xffff}, -- {BRCMS_SROM_PA1LOB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_LC, 0xffff}, -- {BRCMS_SROM_PA1LOB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_LC, 0xffff}, -- {BRCMS_SROM_PA1HIB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_HC, 0xffff}, -- {BRCMS_SROM_PA1HIB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_HC, 0xffff}, -- {BRCMS_SROM_PA1HIB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_HC, 0xffff}, -- {BRCMS_SROM_PA1ITSSIT, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0xff00}, -- {BRCMS_SROM_PA1MAXPWR, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0x00ff}, -- {BRCMS_SROM_PA1LOMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0xff00}, -- {BRCMS_SROM_PA1HIMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0x00ff}, -- {BRCMS_SROM_BXA2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x1800}, -- {BRCMS_SROM_RSSISAV2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x0700}, -- {BRCMS_SROM_RSSISMC2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x00f0}, -- {BRCMS_SROM_RSSISMF2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x000f}, -- {BRCMS_SROM_BXA5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x1800}, -- {BRCMS_SROM_RSSISAV5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x0700}, -- {BRCMS_SROM_RSSISMC5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x00f0}, -- {BRCMS_SROM_RSSISMF5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x000f}, -- {BRCMS_SROM_TRI2G, 0xffffff00, 0, SROM8_TRI52G, 0x00ff}, -- {BRCMS_SROM_TRI5G, 0xffffff00, 0, SROM8_TRI52G, 0xff00}, -- {BRCMS_SROM_TRI5GL, 0xffffff00, 0, SROM8_TRI5GHL, 0x00ff}, -- {BRCMS_SROM_TRI5GH, 0xffffff00, 0, SROM8_TRI5GHL, 0xff00}, -- {BRCMS_SROM_RXPO2G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0x00ff}, -- {BRCMS_SROM_RXPO5G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0xff00}, -- {BRCMS_SROM_TXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, -- SROM4_TXCHAIN_MASK}, -- {BRCMS_SROM_RXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, -- SROM4_RXCHAIN_MASK}, -- {BRCMS_SROM_ANTSWITCH, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, -- SROM4_SWITCH_MASK}, -- {BRCMS_SROM_TSSIPOS2G, 0xffffff00, 0, SROM8_FEM2G, -- SROM8_FEM_TSSIPOS_MASK}, -- {BRCMS_SROM_EXTPAGAIN2G, 0xffffff00, 0, SROM8_FEM2G, -- SROM8_FEM_EXTPA_GAIN_MASK}, -- {BRCMS_SROM_PDETRANGE2G, 0xffffff00, 0, SROM8_FEM2G, -- SROM8_FEM_PDET_RANGE_MASK}, -- {BRCMS_SROM_TRISO2G, 0xffffff00, 0, SROM8_FEM2G, SROM8_FEM_TR_ISO_MASK}, -- {BRCMS_SROM_ANTSWCTL2G, 0xffffff00, 0, SROM8_FEM2G, -- SROM8_FEM_ANTSWLUT_MASK}, -- {BRCMS_SROM_TSSIPOS5G, 0xffffff00, 0, SROM8_FEM5G, -- SROM8_FEM_TSSIPOS_MASK}, -- {BRCMS_SROM_EXTPAGAIN5G, 0xffffff00, 0, SROM8_FEM5G, -- SROM8_FEM_EXTPA_GAIN_MASK}, -- {BRCMS_SROM_PDETRANGE5G, 0xffffff00, 0, SROM8_FEM5G, -- SROM8_FEM_PDET_RANGE_MASK}, -- {BRCMS_SROM_TRISO5G, 0xffffff00, 0, SROM8_FEM5G, SROM8_FEM_TR_ISO_MASK}, -- {BRCMS_SROM_ANTSWCTL5G, 0xffffff00, 0, SROM8_FEM5G, -- SROM8_FEM_ANTSWLUT_MASK}, -- {BRCMS_SROM_TEMPTHRESH, 0xffffff00, 0, SROM8_THERMAL, 0xff00}, -- {BRCMS_SROM_TEMPOFFSET, 0xffffff00, 0, SROM8_THERMAL, 0x00ff}, -- -- {BRCMS_SROM_CCODE, 0xffffff00, SRFL_CCODE, SROM8_CCODE, 0xffff}, -- {BRCMS_SROM_MACADDR, 0xffffff00, SRFL_ETHADDR, SROM8_MACHI, 0xffff}, -- {BRCMS_SROM_LEDDC, 0xffffff00, SRFL_NOFFS | SRFL_LEDDC, SROM8_LEDDC, -- 0xffff}, -- {BRCMS_SROM_RAWTEMPSENSE, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, -- 0x01ff}, -- {BRCMS_SROM_MEASPOWER, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, -- 0xfe00}, -- {BRCMS_SROM_TEMPSENSE_SLOPE, 0xffffff00, SRFL_PRHEX, -- SROM8_TS_SLP_OPT_CORRX, 0x00ff}, -- {BRCMS_SROM_TEMPCORRX, 0xffffff00, SRFL_PRHEX, SROM8_TS_SLP_OPT_CORRX, -- 0xfc00}, -- {BRCMS_SROM_TEMPSENSE_OPTION, 0xffffff00, SRFL_PRHEX, -- SROM8_TS_SLP_OPT_CORRX, 0x0300}, -- {BRCMS_SROM_FREQOFFSET_CORR, 0xffffff00, SRFL_PRHEX, -- SROM8_FOC_HWIQ_IQSWP, 0x000f}, -- {BRCMS_SROM_IQCAL_SWP_DIS, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, -- 0x0010}, -- {BRCMS_SROM_HW_IQCAL_EN, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, -- 0x0020}, -- {BRCMS_SROM_PHYCAL_TEMPDELTA, 0xffffff00, 0, SROM8_PHYCAL_TEMPDELTA, -- 0x00ff}, -- -- {BRCMS_SROM_CCK2GPO, 0x00000100, 0, SROM8_2G_CCKPO, 0xffff}, -- {BRCMS_SROM_OFDM2GPO, 0x00000100, SRFL_MORE, SROM8_2G_OFDMPO, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_2G_OFDMPO + 1, 0xffff}, -- {BRCMS_SROM_OFDM5GPO, 0x00000100, SRFL_MORE, SROM8_5G_OFDMPO, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_5G_OFDMPO + 1, 0xffff}, -- {BRCMS_SROM_OFDM5GLPO, 0x00000100, SRFL_MORE, SROM8_5GL_OFDMPO, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_5GL_OFDMPO + 1, 0xffff}, -- {BRCMS_SROM_OFDM5GHPO, 0x00000100, SRFL_MORE, SROM8_5GH_OFDMPO, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM8_5GH_OFDMPO + 1, 0xffff}, -- {BRCMS_SROM_MCS2GPO0, 0x00000100, 0, SROM8_2G_MCSPO, 0xffff}, -- {BRCMS_SROM_MCS2GPO1, 0x00000100, 0, SROM8_2G_MCSPO + 1, 0xffff}, -- {BRCMS_SROM_MCS2GPO2, 0x00000100, 0, SROM8_2G_MCSPO + 2, 0xffff}, -- {BRCMS_SROM_MCS2GPO3, 0x00000100, 0, SROM8_2G_MCSPO + 3, 0xffff}, -- {BRCMS_SROM_MCS2GPO4, 0x00000100, 0, SROM8_2G_MCSPO + 4, 0xffff}, -- {BRCMS_SROM_MCS2GPO5, 0x00000100, 0, SROM8_2G_MCSPO + 5, 0xffff}, -- {BRCMS_SROM_MCS2GPO6, 0x00000100, 0, SROM8_2G_MCSPO + 6, 0xffff}, -- {BRCMS_SROM_MCS2GPO7, 0x00000100, 0, SROM8_2G_MCSPO + 7, 0xffff}, -- {BRCMS_SROM_MCS5GPO0, 0x00000100, 0, SROM8_5G_MCSPO, 0xffff}, -- {BRCMS_SROM_MCS5GPO1, 0x00000100, 0, SROM8_5G_MCSPO + 1, 0xffff}, -- {BRCMS_SROM_MCS5GPO2, 0x00000100, 0, SROM8_5G_MCSPO + 2, 0xffff}, -- {BRCMS_SROM_MCS5GPO3, 0x00000100, 0, SROM8_5G_MCSPO + 3, 0xffff}, -- {BRCMS_SROM_MCS5GPO4, 0x00000100, 0, SROM8_5G_MCSPO + 4, 0xffff}, -- {BRCMS_SROM_MCS5GPO5, 0x00000100, 0, SROM8_5G_MCSPO + 5, 0xffff}, -- {BRCMS_SROM_MCS5GPO6, 0x00000100, 0, SROM8_5G_MCSPO + 6, 0xffff}, -- {BRCMS_SROM_MCS5GPO7, 0x00000100, 0, SROM8_5G_MCSPO + 7, 0xffff}, -- {BRCMS_SROM_MCS5GLPO0, 0x00000100, 0, SROM8_5GL_MCSPO, 0xffff}, -- {BRCMS_SROM_MCS5GLPO1, 0x00000100, 0, SROM8_5GL_MCSPO + 1, 0xffff}, -- {BRCMS_SROM_MCS5GLPO2, 0x00000100, 0, SROM8_5GL_MCSPO + 2, 0xffff}, -- {BRCMS_SROM_MCS5GLPO3, 0x00000100, 0, SROM8_5GL_MCSPO + 3, 0xffff}, -- {BRCMS_SROM_MCS5GLPO4, 0x00000100, 0, SROM8_5GL_MCSPO + 4, 0xffff}, -- {BRCMS_SROM_MCS5GLPO5, 0x00000100, 0, SROM8_5GL_MCSPO + 5, 0xffff}, -- {BRCMS_SROM_MCS5GLPO6, 0x00000100, 0, SROM8_5GL_MCSPO + 6, 0xffff}, -- {BRCMS_SROM_MCS5GLPO7, 0x00000100, 0, SROM8_5GL_MCSPO + 7, 0xffff}, -- {BRCMS_SROM_MCS5GHPO0, 0x00000100, 0, SROM8_5GH_MCSPO, 0xffff}, -- {BRCMS_SROM_MCS5GHPO1, 0x00000100, 0, SROM8_5GH_MCSPO + 1, 0xffff}, -- {BRCMS_SROM_MCS5GHPO2, 0x00000100, 0, SROM8_5GH_MCSPO + 2, 0xffff}, -- {BRCMS_SROM_MCS5GHPO3, 0x00000100, 0, SROM8_5GH_MCSPO + 3, 0xffff}, -- {BRCMS_SROM_MCS5GHPO4, 0x00000100, 0, SROM8_5GH_MCSPO + 4, 0xffff}, -- {BRCMS_SROM_MCS5GHPO5, 0x00000100, 0, SROM8_5GH_MCSPO + 5, 0xffff}, -- {BRCMS_SROM_MCS5GHPO6, 0x00000100, 0, SROM8_5GH_MCSPO + 6, 0xffff}, -- {BRCMS_SROM_MCS5GHPO7, 0x00000100, 0, SROM8_5GH_MCSPO + 7, 0xffff}, -- {BRCMS_SROM_CDDPO, 0x00000100, 0, SROM8_CDDPO, 0xffff}, -- {BRCMS_SROM_STBCPO, 0x00000100, 0, SROM8_STBCPO, 0xffff}, -- {BRCMS_SROM_BW40PO, 0x00000100, 0, SROM8_BW40PO, 0xffff}, -- {BRCMS_SROM_BWDUPPO, 0x00000100, 0, SROM8_BWDUPPO, 0xffff}, -- -- /* power per rate from sromrev 9 */ -- {BRCMS_SROM_CCKBW202GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20, 0xffff}, -- {BRCMS_SROM_CCKBW20UL2GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20UL, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW202GPO, 0xfffffe00, SRFL_MORE, -- SROM9_2GPO_LOFDMBW20, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20 + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW20UL2GPO, 0xfffffe00, SRFL_MORE, -- SROM9_2GPO_LOFDMBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20UL + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW205GLPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GLPO_LOFDMBW20, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20 + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW20UL5GLPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GLPO_LOFDMBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20UL + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW205GMPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GMPO_LOFDMBW20, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20 + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW20UL5GMPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GMPO_LOFDMBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20UL + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW205GHPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GHPO_LOFDMBW20, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20 + 1, 0xffff}, -- {BRCMS_SROM_LEGOFDMBW20UL5GHPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GHPO_LOFDMBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20UL + 1, 0xffff}, -- {BRCMS_SROM_MCSBW202GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW20UL2GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20UL, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20UL + 1, 0xffff}, -- {BRCMS_SROM_MCSBW402GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW40, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW40 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW205GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW20, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW20UL5GLPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GLPO_MCSBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20UL + 1, 0xffff}, -- {BRCMS_SROM_MCSBW405GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW40, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW40 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW205GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW20, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW20UL5GMPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GMPO_MCSBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20UL + 1, 0xffff}, -- {BRCMS_SROM_MCSBW405GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW40, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW40 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW205GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW20, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20 + 1, 0xffff}, -- {BRCMS_SROM_MCSBW20UL5GHPO, 0xfffffe00, SRFL_MORE, -- SROM9_5GHPO_MCSBW20UL, 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20UL + 1, 0xffff}, -- {BRCMS_SROM_MCSBW405GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW40, -- 0xffff}, -- {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW40 + 1, 0xffff}, -- {BRCMS_SROM_MCS32PO, 0xfffffe00, 0, SROM9_PO_MCS32, 0xffff}, -- {BRCMS_SROM_LEGOFDM40DUPPO, 0xfffffe00, 0, SROM9_PO_LOFDM40DUP, 0xffff}, -- -- {BRCMS_SROM_NULL, 0, 0, 0, 0} --}; -- --static const struct brcms_sromvar perpath_pci_sromvars[] = { -- {BRCMS_SROM_MAXP2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0x00ff}, -- {BRCMS_SROM_ITT2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0xff00}, -- {BRCMS_SROM_ITT5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0xff00}, -- {BRCMS_SROM_PA2GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA, 0xffff}, -- {BRCMS_SROM_PA2GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 1, 0xffff}, -- {BRCMS_SROM_PA2GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 2, 0xffff}, -- {BRCMS_SROM_MAXP5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0x00ff}, -- {BRCMS_SROM_MAXP5GHA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0x00ff}, -- {BRCMS_SROM_MAXP5GLA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0xff00}, -- {BRCMS_SROM_PA5GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA, 0xffff}, -- {BRCMS_SROM_PA5GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 1, 0xffff}, -- {BRCMS_SROM_PA5GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 2, 0xffff}, -- {BRCMS_SROM_PA5GLW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA, 0xffff}, -- {BRCMS_SROM_PA5GLW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 1, -- 0xffff}, -- {BRCMS_SROM_PA5GLW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 2, -- 0xffff}, -- {BRCMS_SROM_PA5GHW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA, 0xffff}, -- {BRCMS_SROM_PA5GHW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 1, -- 0xffff}, -- {BRCMS_SROM_PA5GHW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 2, -- 0xffff}, -- {BRCMS_SROM_NULL, 0, 0, 0, 0} --}; -- --/* crc table has the same contents for every device instance, so it can be -- * shared between devices. */ --static u8 brcms_srom_crc8_table[CRC8_TABLE_SIZE]; -- --static uint mask_shift(u16 mask) --{ -- uint i; -- for (i = 0; i < (sizeof(mask) << 3); i++) { -- if (mask & (1 << i)) -- return i; -- } -- return 0; --} -- --static uint mask_width(u16 mask) --{ -- int i; -- for (i = (sizeof(mask) << 3) - 1; i >= 0; i--) { -- if (mask & (1 << i)) -- return (uint) (i - mask_shift(mask) + 1); -- } -- return 0; --} -- --static inline void le16_to_cpu_buf(u16 *buf, uint nwords) --{ -- while (nwords--) -- *(buf + nwords) = le16_to_cpu(*(__le16 *)(buf + nwords)); --} -- --static inline void cpu_to_le16_buf(u16 *buf, uint nwords) --{ -- while (nwords--) -- *(__le16 *)(buf + nwords) = cpu_to_le16(*(buf + nwords)); --} -- --/* -- * convert binary srom data into linked list of srom variable items. -- */ --static int --_initvars_srom_pci(u8 sromrev, u16 *srom, struct list_head *var_list) --{ -- struct brcms_srom_list_head *entry; -- enum brcms_srom_id id; -- u16 w; -- u32 val = 0; -- const struct brcms_sromvar *srv; -- uint width; -- uint flags; -- u32 sr = (1 << sromrev); -- uint p; -- uint pb = SROM8_PATH0; -- const uint psz = SROM8_PATH1 - SROM8_PATH0; -- -- /* first store the srom revision */ -- entry = kzalloc(sizeof(struct brcms_srom_list_head), GFP_KERNEL); -- if (!entry) -- return -ENOMEM; -- -- entry->varid = BRCMS_SROM_REV; -- entry->var_type = BRCMS_SROM_UNUMBER; -- entry->uval = sromrev; -- list_add(&entry->var_list, var_list); -- -- for (srv = pci_sromvars; srv->varid != BRCMS_SROM_NULL; srv++) { -- enum brcms_srom_var_type type; -- u8 ea[ETH_ALEN]; -- u8 extra_space = 0; -- -- if ((srv->revmask & sr) == 0) -- continue; -- -- flags = srv->flags; -- id = srv->varid; -- -- /* This entry is for mfgc only. Don't generate param for it, */ -- if (flags & SRFL_NOVAR) -- continue; -- -- if (flags & SRFL_ETHADDR) { -- /* -- * stored in string format XX:XX:XX:XX:XX:XX (17 chars) -- */ -- ea[0] = (srom[srv->off] >> 8) & 0xff; -- ea[1] = srom[srv->off] & 0xff; -- ea[2] = (srom[srv->off + 1] >> 8) & 0xff; -- ea[3] = srom[srv->off + 1] & 0xff; -- ea[4] = (srom[srv->off + 2] >> 8) & 0xff; -- ea[5] = srom[srv->off + 2] & 0xff; -- /* 17 characters + string terminator - union size */ -- extra_space = 18 - sizeof(s32); -- type = BRCMS_SROM_STRING; -- } else { -- w = srom[srv->off]; -- val = (w & srv->mask) >> mask_shift(srv->mask); -- width = mask_width(srv->mask); -- -- while (srv->flags & SRFL_MORE) { -- srv++; -- if (srv->off == 0) -- continue; -- -- w = srom[srv->off]; -- val += -- ((w & srv->mask) >> mask_shift(srv-> -- mask)) << -- width; -- width += mask_width(srv->mask); -- } -- -- if ((flags & SRFL_NOFFS) -- && ((int)val == (1 << width) - 1)) -- continue; -- -- if (flags & SRFL_CCODE) { -- type = BRCMS_SROM_STRING; -- } else if (flags & SRFL_LEDDC) { -- /* LED Powersave duty cycle has to be scaled: -- *(oncount >> 24) (offcount >> 8) -- */ -- u32 w32 = /* oncount */ -- (((val >> 8) & 0xff) << 24) | -- /* offcount */ -- (((val & 0xff)) << 8); -- type = BRCMS_SROM_UNUMBER; -- val = w32; -- } else if ((flags & SRFL_PRSIGN) -- && (val & (1 << (width - 1)))) { -- type = BRCMS_SROM_SNUMBER; -- val |= ~0 << width; -- } else -- type = BRCMS_SROM_UNUMBER; -- } -- -- entry = kzalloc(sizeof(struct brcms_srom_list_head) + -- extra_space, GFP_KERNEL); -- if (!entry) -- return -ENOMEM; -- entry->varid = id; -- entry->var_type = type; -- if (flags & SRFL_ETHADDR) { -- snprintf(entry->buf, 18, "%pM", ea); -- } else if (flags & SRFL_CCODE) { -- if (val == 0) -- entry->buf[0] = '\0'; -- else -- snprintf(entry->buf, 3, "%c%c", -- (val >> 8), (val & 0xff)); -- } else { -- entry->uval = val; -- } -- -- list_add(&entry->var_list, var_list); -- } -- -- for (p = 0; p < MAX_PATH_SROM; p++) { -- for (srv = perpath_pci_sromvars; -- srv->varid != BRCMS_SROM_NULL; srv++) { -- if ((srv->revmask & sr) == 0) -- continue; -- -- if (srv->flags & SRFL_NOVAR) -- continue; -- -- w = srom[pb + srv->off]; -- val = (w & srv->mask) >> mask_shift(srv->mask); -- width = mask_width(srv->mask); -- -- /* Cheating: no per-path var is more than -- * 1 word */ -- if ((srv->flags & SRFL_NOFFS) -- && ((int)val == (1 << width) - 1)) -- continue; -- -- entry = -- kzalloc(sizeof(struct brcms_srom_list_head), -- GFP_KERNEL); -- if (!entry) -- return -ENOMEM; -- entry->varid = srv->varid+p; -- entry->var_type = BRCMS_SROM_UNUMBER; -- entry->uval = val; -- list_add(&entry->var_list, var_list); -- } -- pb += psz; -- } -- return 0; --} -- --/* -- * The crc check is done on a little-endian array, we need -- * to switch the bytes around before checking crc (and -- * then switch it back). -- */ --static int do_crc_check(u16 *buf, unsigned nwords) --{ -- u8 crc; -- -- cpu_to_le16_buf(buf, nwords); -- crc = crc8(brcms_srom_crc8_table, (void *)buf, nwords << 1, CRC8_INIT_VALUE); -- le16_to_cpu_buf(buf, nwords); -- -- return crc == CRC8_GOOD_VALUE(brcms_srom_crc8_table); --} -- --/* -- * Read in and validate sprom. -- * Return 0 on success, nonzero on error. -- */ --static int --sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc) --{ -- int err = 0; -- uint i; -- struct bcma_device *core; -- uint sprom_offset; -- -- /* determine core to read */ -- if (ai_get_ccrev(sih) < 32) { -- core = ai_findcore(sih, BCMA_CORE_80211, 0); -- sprom_offset = PCI_BAR0_SPROM_OFFSET; -- } else { -- core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); -- sprom_offset = CHIPCREGOFFS(sromotp); -- } -- -- /* read the sprom */ -- for (i = 0; i < nwords; i++) -- buf[i] = bcma_read16(core, sprom_offset+i*2); -- -- if (buf[0] == 0xffff) -- /* -- * The hardware thinks that an srom that starts with -- * 0xffff is blank, regardless of the rest of the -- * content, so declare it bad. -- */ -- return -ENODATA; -- -- if (check_crc && !do_crc_check(buf, nwords)) -- err = -EIO; -- -- return err; --} -- --static int otp_read_pci(struct si_pub *sih, u16 *buf, uint nwords) --{ -- u8 *otp; -- uint sz = OTP_SZ_MAX / 2; /* size in words */ -- int err = 0; -- -- otp = kzalloc(OTP_SZ_MAX, GFP_ATOMIC); -- if (otp == NULL) -- return -ENOMEM; -- -- err = otp_read_region(sih, OTP_HW_RGN, (u16 *) otp, &sz); -- -- sz = min_t(uint, sz, nwords); -- memcpy(buf, otp, sz * 2); -- -- kfree(otp); -- -- /* Check CRC */ -- if (buf[0] == 0xffff) -- /* The hardware thinks that an srom that starts with 0xffff -- * is blank, regardless of the rest of the content, so declare -- * it bad. -- */ -- return -ENODATA; -- -- /* fixup the endianness so crc8 will pass */ -- cpu_to_le16_buf(buf, sz); -- if (crc8(brcms_srom_crc8_table, (u8 *) buf, sz * 2, -- CRC8_INIT_VALUE) != CRC8_GOOD_VALUE(brcms_srom_crc8_table)) -- err = -EIO; -- else -- /* now correct the endianness of the byte array */ -- le16_to_cpu_buf(buf, sz); -- -- return err; --} -- --/* -- * Initialize nonvolatile variable table from sprom. -- * Return 0 on success, nonzero on error. -- */ --int srom_var_init(struct si_pub *sih) --{ -- u16 *srom; -- u8 sromrev = 0; -- u32 sr; -- int err = 0; -- -- /* -- * Apply CRC over SROM content regardless SROM is present or not. -- */ -- srom = kmalloc(SROM_MAX, GFP_ATOMIC); -- if (!srom) -- return -ENOMEM; -- -- crc8_populate_lsb(brcms_srom_crc8_table, SROM_CRC8_POLY); -- if (ai_is_sprom_available(sih)) { -- err = sprom_read_pci(sih, srom, SROM4_WORDS, true); -- -- if (err == 0) -- /* srom read and passed crc */ -- /* top word of sprom contains version and crc8 */ -- sromrev = srom[SROM4_CRCREV] & 0xff; -- } else { -- /* Use OTP if SPROM not available */ -- err = otp_read_pci(sih, srom, SROM4_WORDS); -- if (err == 0) -- /* OTP only contain SROM rev8/rev9 for now */ -- sromrev = srom[SROM4_CRCREV] & 0xff; -- } -- -- if (!err) { -- struct si_info *sii = (struct si_info *)sih; -- -- /* Bitmask for the sromrev */ -- sr = 1 << sromrev; -- -- /* -- * srom version check: Current valid versions: 8, 9 -- */ -- if ((sr & 0x300) == 0) { -- err = -EINVAL; -- goto errout; -- } -- -- INIT_LIST_HEAD(&sii->var_list); -- -- /* parse SROM into name=value pairs. */ -- err = _initvars_srom_pci(sromrev, srom, &sii->var_list); -- if (err) -- srom_free_vars(sih); -- } -- --errout: -- kfree(srom); -- return err; --} -- --void srom_free_vars(struct si_pub *sih) --{ -- struct si_info *sii; -- struct brcms_srom_list_head *entry, *next; -- -- sii = (struct si_info *)sih; -- list_for_each_entry_safe(entry, next, &sii->var_list, var_list) { -- list_del(&entry->var_list); -- kfree(entry); -- } --} -- --/* -- * Search the name=value vars for a specific one and return its value. -- * Returns NULL if not found. -- */ --char *getvar(struct si_pub *sih, enum brcms_srom_id id) --{ -- struct si_info *sii; -- struct brcms_srom_list_head *entry; -- -- sii = (struct si_info *)sih; -- -- list_for_each_entry(entry, &sii->var_list, var_list) -- if (entry->varid == id) -- return &entry->buf[0]; -- -- /* nothing found */ -- return NULL; --} -- --/* -- * Search the vars for a specific one and return its value as -- * an integer. Returns 0 if not found.- -- */ --int getintvar(struct si_pub *sih, enum brcms_srom_id id) --{ -- struct si_info *sii; -- struct brcms_srom_list_head *entry; -- unsigned long res; -- -- sii = (struct si_info *)sih; -- -- list_for_each_entry(entry, &sii->var_list, var_list) -- if (entry->varid == id) { -- if (entry->var_type == BRCMS_SROM_SNUMBER || -- entry->var_type == BRCMS_SROM_UNUMBER) -- return (int)entry->sval; -- else if (!kstrtoul(&entry->buf[0], 0, &res)) -- return (int)res; -- } -- -- return 0; --} ---- a/drivers/net/wireless/brcm80211/brcmsmac/srom.h -+++ /dev/null -@@ -1,29 +0,0 @@ --/* -- * Copyright (c) 2010 Broadcom Corporation -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY -- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION -- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN -- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -- */ -- --#ifndef _BRCM_SROM_H_ --#define _BRCM_SROM_H_ -- --#include "types.h" -- --/* Prototypes */ --extern int srom_var_init(struct si_pub *sih); --extern void srom_free_vars(struct si_pub *sih); -- --extern int srom_read(struct si_pub *sih, uint bus, void *curmap, -- uint byteoff, uint nbytes, u16 *buf, bool check_crc); -- --#endif /* _BRCM_SROM_H_ */ ---- a/drivers/net/wireless/brcm80211/brcmsmac/stf.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/stf.c -@@ -370,9 +370,11 @@ void brcms_c_stf_phy_txant_upd(struct br - - void brcms_c_stf_phy_chain_calc(struct brcms_c_info *wlc) - { -+ struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; -+ - /* get available rx/tx chains */ -- wlc->stf->hw_txchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_TXCHAIN); -- wlc->stf->hw_rxchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_RXCHAIN); -+ wlc->stf->hw_txchain = sprom->txchain; -+ wlc->stf->hw_rxchain = sprom->rxchain; - - /* these parameter are intended to be used for all PHY types */ - if (wlc->stf->hw_txchain == 0 || wlc->stf->hw_txchain == 0xf) { |