diff options
Diffstat (limited to 'package/mac80211/patches/300-pending_work.patch')
| -rw-r--r-- | package/mac80211/patches/300-pending_work.patch | 726 |
1 files changed, 10 insertions, 716 deletions
diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch index fab677f2f9..245a5db1c9 100644 --- a/package/mac80211/patches/300-pending_work.patch +++ b/package/mac80211/patches/300-pending_work.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -2416,6 +2416,22 @@ ath5k_tx_complete_poll_work(struct work_ +@@ -2417,6 +2417,22 @@ ath5k_tx_complete_poll_work(struct work_ * Initialization routines * \*************************/ @@ -23,7 +23,7 @@ int __devinit ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) { -@@ -2437,6 +2453,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const +@@ -2438,6 +2454,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); @@ -33,531 +33,6 @@ /* SW support for IBSS_RSN is provided by mac80211 */ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; ---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -618,19 +618,10 @@ static void ar5008_hw_init_bb(struct ath - u32 synthDelay; - - synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; -- if (IS_CHAN_B(chan)) -- synthDelay = (4 * synthDelay) / 22; -- else -- synthDelay /= 10; -- -- if (IS_CHAN_HALF_RATE(chan)) -- synthDelay *= 2; -- else if (IS_CHAN_QUARTER_RATE(chan)) -- synthDelay *= 4; - - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); - -- udelay(synthDelay + BASE_ACTIVATE_DELAY); -+ ath9k_hw_synth_delay(ah, chan, synthDelay); - } - - static void ar5008_hw_init_chain_masks(struct ath_hw *ah) -@@ -868,7 +859,7 @@ static int ar5008_hw_process_ini(struct - ar5008_hw_set_channel_regs(ah, chan); - ar5008_hw_init_chain_masks(ah); - ath9k_olc_init(ah); -- ath9k_hw_apply_txpower(ah, chan); -+ ath9k_hw_apply_txpower(ah, chan, false); - - /* Write analog registers */ - if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) { -@@ -948,12 +939,8 @@ static bool ar5008_hw_rfbus_req(struct a - static void ar5008_hw_rfbus_done(struct ath_hw *ah) - { - u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; -- if (IS_CHAN_B(ah->curchan)) -- synthDelay = (4 * synthDelay) / 22; -- else -- synthDelay /= 10; - -- udelay(synthDelay + BASE_ACTIVATE_DELAY); -+ ath9k_hw_synth_delay(ah, ah->curchan, synthDelay); - - REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); - } ---- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c -@@ -1000,10 +1000,12 @@ static bool ar9003_hw_init_cal(struct at - if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal) - ar9003_mci_init_cal_req(ah, &is_reusable); - -- txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); -- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); -- udelay(5); -- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); -+ if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) { -+ txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); -+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); -+ udelay(5); -+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); -+ } - - skip_tx_iqcal: - if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { ---- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c -@@ -4281,18 +4281,10 @@ static int ar9003_hw_tx_power_regwrite(s - #undef POW_SM - } - --static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq, -- u8 *targetPowerValT2) -+static void ar9003_hw_get_legacy_target_powers(struct ath_hw *ah, u16 freq, -+ u8 *targetPowerValT2, -+ bool is2GHz) - { -- /* XXX: hard code for now, need to get from eeprom struct */ -- u8 ht40PowerIncForPdadc = 0; -- bool is2GHz = false; -- unsigned int i = 0; -- struct ath_common *common = ath9k_hw_common(ah); -- -- if (freq < 4000) -- is2GHz = true; -- - targetPowerValT2[ALL_TARGET_LEGACY_6_24] = - ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_6_24, freq, - is2GHz); -@@ -4305,6 +4297,11 @@ static void ar9003_hw_set_target_power_e - targetPowerValT2[ALL_TARGET_LEGACY_54] = - ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_54, freq, - is2GHz); -+} -+ -+static void ar9003_hw_get_cck_target_powers(struct ath_hw *ah, u16 freq, -+ u8 *targetPowerValT2) -+{ - targetPowerValT2[ALL_TARGET_LEGACY_1L_5L] = - ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_1L_5L, - freq); -@@ -4314,6 +4311,11 @@ static void ar9003_hw_set_target_power_e - ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11L, freq); - targetPowerValT2[ALL_TARGET_LEGACY_11S] = - ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11S, freq); -+} -+ -+static void ar9003_hw_get_ht20_target_powers(struct ath_hw *ah, u16 freq, -+ u8 *targetPowerValT2, bool is2GHz) -+{ - targetPowerValT2[ALL_TARGET_HT20_0_8_16] = - ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, - is2GHz); -@@ -4356,6 +4358,16 @@ static void ar9003_hw_set_target_power_e - targetPowerValT2[ALL_TARGET_HT20_23] = - ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_23, freq, - is2GHz); -+} -+ -+static void ar9003_hw_get_ht40_target_powers(struct ath_hw *ah, -+ u16 freq, -+ u8 *targetPowerValT2, -+ bool is2GHz) -+{ -+ /* XXX: hard code for now, need to get from eeprom struct */ -+ u8 ht40PowerIncForPdadc = 0; -+ - targetPowerValT2[ALL_TARGET_HT40_0_8_16] = - ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, - is2GHz) + ht40PowerIncForPdadc; -@@ -4399,6 +4411,26 @@ static void ar9003_hw_set_target_power_e - targetPowerValT2[ALL_TARGET_HT40_23] = - ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq, - is2GHz) + ht40PowerIncForPdadc; -+} -+ -+static void ar9003_hw_get_target_power_eeprom(struct ath_hw *ah, -+ struct ath9k_channel *chan, -+ u8 *targetPowerValT2) -+{ -+ bool is2GHz = IS_CHAN_2GHZ(chan); -+ unsigned int i = 0; -+ struct ath_common *common = ath9k_hw_common(ah); -+ u16 freq = chan->channel; -+ -+ if (is2GHz) -+ ar9003_hw_get_cck_target_powers(ah, freq, targetPowerValT2); -+ -+ ar9003_hw_get_legacy_target_powers(ah, freq, targetPowerValT2, is2GHz); -+ ar9003_hw_get_ht20_target_powers(ah, freq, targetPowerValT2, is2GHz); -+ -+ if (IS_CHAN_HT40(chan)) -+ ar9003_hw_get_ht40_target_powers(ah, freq, targetPowerValT2, -+ is2GHz); - - for (i = 0; i < ar9300RateSize; i++) { - ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n", -@@ -4778,9 +4810,6 @@ static void ar9003_hw_set_power_per_rate - scaledPower = ath9k_hw_get_scaled_power(ah, powerLimit, - antenna_reduction); - -- /* -- * Get target powers from EEPROM - our baseline for TX Power -- */ - if (is2ghz) { - /* Setup for CTL modes */ - /* CTL_11B, CTL_11G, CTL_2GHT20 */ -@@ -4952,7 +4981,12 @@ static void ath9k_hw_ar9300_set_txpower( - unsigned int i = 0, paprd_scale_factor = 0; - u8 pwr_idx, min_pwridx = 0; - -- ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2); -+ memset(targetPowerValT2, 0 , sizeof(targetPowerValT2)); -+ -+ /* -+ * Get target powers from EEPROM - our baseline for TX Power -+ */ -+ ar9003_hw_get_target_power_eeprom(ah, chan, targetPowerValT2); - - if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) { - if (IS_CHAN_2GHZ(chan)) ---- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c -@@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw * - - if (val) { - ah->paprd_table_write_done = true; -- ath9k_hw_apply_txpower(ah, chan); -+ ath9k_hw_apply_txpower(ah, chan, false); - } - - REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0, ---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -373,7 +373,7 @@ static void ar9003_hw_spur_ofdm_work(str - else - spur_subchannel_sd = 0; - -- spur_freq_sd = (freq_offset << 9) / 11; -+ spur_freq_sd = ((freq_offset + 10) << 9) / 11; - - } else { - if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL, -@@ -382,7 +382,7 @@ static void ar9003_hw_spur_ofdm_work(str - else - spur_subchannel_sd = 1; - -- spur_freq_sd = (freq_offset << 9) / 11; -+ spur_freq_sd = ((freq_offset - 10) << 9) / 11; - - } - -@@ -526,22 +526,10 @@ static void ar9003_hw_init_bb(struct ath - * Value is in 100ns increments. - */ - synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; -- if (IS_CHAN_B(chan)) -- synthDelay = (4 * synthDelay) / 22; -- else -- synthDelay /= 10; - - /* Activate the PHY (includes baseband activate + synthesizer on) */ - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); -- -- /* -- * There is an issue if the AP starts the calibration before -- * the base band timeout completes. This could result in the -- * rx_clear false triggering. As a workaround we add delay an -- * extra BASE_ACTIVATE_DELAY usecs to ensure this condition -- * does not happen. -- */ -- udelay(synthDelay + BASE_ACTIVATE_DELAY); -+ ath9k_hw_synth_delay(ah, chan, synthDelay); - } - - static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) -@@ -692,7 +680,7 @@ static int ar9003_hw_process_ini(struct - ar9003_hw_override_ini(ah); - ar9003_hw_set_channel_regs(ah, chan); - ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); -- ath9k_hw_apply_txpower(ah, chan); -+ ath9k_hw_apply_txpower(ah, chan, false); - - if (AR_SREV_9462(ah)) { - if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, -@@ -723,6 +711,14 @@ static void ar9003_hw_set_rfmode(struct - - if (IS_CHAN_A_FAST_CLOCK(ah, chan)) - rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); -+ if (IS_CHAN_QUARTER_RATE(chan)) -+ rfMode |= AR_PHY_MODE_QUARTER; -+ if (IS_CHAN_HALF_RATE(chan)) -+ rfMode |= AR_PHY_MODE_HALF; -+ -+ if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)) -+ REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, -+ AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW, 3); - - REG_WRITE(ah, AR_PHY_MODE, rfMode); - } -@@ -793,12 +789,8 @@ static bool ar9003_hw_rfbus_req(struct a - static void ar9003_hw_rfbus_done(struct ath_hw *ah) - { - u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; -- if (IS_CHAN_B(ah->curchan)) -- synthDelay = (4 * synthDelay) / 22; -- else -- synthDelay /= 10; - -- udelay(synthDelay + BASE_ACTIVATE_DELAY); -+ ath9k_hw_synth_delay(ah, ah->curchan, synthDelay); - - REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); - } ---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h -+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h -@@ -468,6 +468,9 @@ - #define AR_PHY_ADDAC_PARA_CTL (AR_SM_BASE + 0x150) - #define AR_PHY_XPA_CFG (AR_SM_BASE + 0x158) - -+#define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW 3 -+#define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW_S 0 -+ - #define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A 0x0001FC00 - #define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A_S 10 - #define AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A 0x3FF ---- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c -@@ -798,6 +798,8 @@ static void ath9k_hw_ar9287_set_txpower( - regulatory->max_power_level = ratesArray[i]; - } - -+ ath9k_hw_update_regulatory_maxpower(ah); -+ - if (test) - return; - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -191,6 +191,22 @@ bool ath9k_hw_wait(struct ath_hw *ah, u3 - } - EXPORT_SYMBOL(ath9k_hw_wait); - -+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, -+ int hw_delay) -+{ -+ if (IS_CHAN_B(chan)) -+ hw_delay = (4 * hw_delay) / 22; -+ else -+ hw_delay /= 10; -+ -+ if (IS_CHAN_HALF_RATE(chan)) -+ hw_delay *= 2; -+ else if (IS_CHAN_QUARTER_RATE(chan)) -+ hw_delay *= 4; -+ -+ udelay(hw_delay + BASE_ACTIVATE_DELAY); -+} -+ - void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, - int column, unsigned int *writecnt) - { -@@ -1020,7 +1036,7 @@ void ath9k_hw_init_global_settings(struc - struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_conf *conf = &common->hw->conf; - const struct ath9k_channel *chan = ah->curchan; -- int acktimeout, ctstimeout; -+ int acktimeout, ctstimeout, ack_offset = 0; - int slottime; - int sifstime; - int rx_lat = 0, tx_lat = 0, eifs = 0; -@@ -1041,6 +1057,11 @@ void ath9k_hw_init_global_settings(struc - rx_lat = 37; - tx_lat = 54; - -+ if (IS_CHAN_5GHZ(chan)) -+ sifstime = 16; -+ else -+ sifstime = 10; -+ - if (IS_CHAN_HALF_RATE(chan)) { - eifs = 175; - rx_lat *= 2; -@@ -1048,8 +1069,9 @@ void ath9k_hw_init_global_settings(struc - if (IS_CHAN_A_FAST_CLOCK(ah, chan)) - tx_lat += 11; - -+ sifstime *= 2; -+ ack_offset = 16; - slottime = 13; -- sifstime = 32; - } else if (IS_CHAN_QUARTER_RATE(chan)) { - eifs = 340; - rx_lat = (rx_lat * 4) - 1; -@@ -1057,8 +1079,9 @@ void ath9k_hw_init_global_settings(struc - if (IS_CHAN_A_FAST_CLOCK(ah, chan)) - tx_lat += 22; - -+ sifstime *= 4; -+ ack_offset = 32; - slottime = 21; -- sifstime = 64; - } else { - if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) { - eifs = AR_D_GBL_IFS_EIFS_ASYNC_FIFO; -@@ -1072,14 +1095,10 @@ void ath9k_hw_init_global_settings(struc - tx_lat = MS(reg, AR_USEC_TX_LAT); - - slottime = ah->slottime; -- if (IS_CHAN_5GHZ(chan)) -- sifstime = 16; -- else -- sifstime = 10; - } - - /* As defined by IEEE 802.11-2007 17.3.8.6 */ -- acktimeout = slottime + sifstime + 3 * ah->coverage_class; -+ acktimeout = slottime + sifstime + 3 * ah->coverage_class + ack_offset; - ctstimeout = acktimeout; - - /* -@@ -1089,7 +1108,8 @@ void ath9k_hw_init_global_settings(struc - * BA frames in some implementations, but it has been found to fix ACK - * timeout issues in other cases as well. - */ -- if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) { -+ if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ && -+ !IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) { - acktimeout += 64 - sifstime - ah->slottime; - ctstimeout += 48 - sifstime - ah->slottime; - } -@@ -1469,6 +1489,10 @@ static bool ath9k_hw_channel_change(stru - CHANNEL_5GHZ)); - mode_diff = (chan->chanmode != ah->curchan->chanmode); - -+ if ((ah->curchan->channelFlags | chan->channelFlags) & -+ (CHANNEL_HALF | CHANNEL_QUARTER)) -+ return false; -+ - for (qnum = 0; qnum < AR_NUM_QCU; qnum++) { - if (ath9k_hw_numtxpending(ah, qnum)) { - ath_dbg(common, QUEUE, -@@ -1502,7 +1526,7 @@ static bool ath9k_hw_channel_change(stru - return false; - } - ath9k_hw_set_clockrate(ah); -- ath9k_hw_apply_txpower(ah, chan); -+ ath9k_hw_apply_txpower(ah, chan, false); - ath9k_hw_rfbus_done(ah); - - if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) -@@ -2773,7 +2797,8 @@ static int get_antenna_gain(struct ath_h - return ah->eep_ops->get_eeprom(ah, gain_param); - } - --void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) -+void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, -+ bool test) - { - struct ath_regulatory *reg = ath9k_hw_regulatory(ah); - struct ieee80211_channel *channel; -@@ -2794,7 +2819,7 @@ void ath9k_hw_apply_txpower(struct ath_h - - ah->eep_ops->set_txpower(ah, chan, - ath9k_regd_get_ctl(reg, chan), -- ant_reduction, new_pwr, false); -+ ant_reduction, new_pwr, test); - } - - void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) -@@ -2807,7 +2832,7 @@ void ath9k_hw_set_txpowerlimit(struct at - if (test) - channel->max_power = MAX_RATE_POWER / 2; - -- ath9k_hw_apply_txpower(ah, chan); -+ ath9k_hw_apply_txpower(ah, chan, test); - - if (test) - channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2); ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -923,6 +923,8 @@ void ath9k_hw_set_gpio(struct ath_hw *ah - void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); - - /* General Operation */ -+void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, -+ int hw_delay); - bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); - void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, - int column, unsigned int *writecnt); -@@ -982,7 +984,8 @@ void ath9k_hw_name(struct ath_hw *ah, ch - /* PHY */ - void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, - u32 *coef_mantissa, u32 *coef_exponent); --void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan); -+void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, -+ bool test); - - /* - * Code Specific to AR5008, AR9001 or AR9002, ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -647,6 +647,24 @@ void ath9k_reload_chainmask_settings(str - setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap); - } - -+static const struct ieee80211_iface_limit if_limits[] = { -+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) | -+ BIT(NL80211_IFTYPE_P2P_CLIENT) | -+ BIT(NL80211_IFTYPE_WDS) }, -+ { .max = 8, .types = -+#ifdef CONFIG_MAC80211_MESH -+ BIT(NL80211_IFTYPE_MESH_POINT) | -+#endif -+ BIT(NL80211_IFTYPE_AP) | -+ BIT(NL80211_IFTYPE_P2P_GO) }, -+}; -+ -+static const struct ieee80211_iface_combination if_comb = { -+ .limits = if_limits, -+ .n_limits = ARRAY_SIZE(if_limits), -+ .max_interfaces = 2048, -+ .num_different_channels = 1, -+}; - - void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) - { -@@ -676,6 +694,9 @@ void ath9k_set_hw_capab(struct ath_softc - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); - -+ hw->wiphy->iface_combinations = &if_comb; -+ hw->wiphy->n_iface_combinations = 1; -+ - if (AR_SREV_5416(sc->sc_ah)) - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - ---- a/drivers/net/wireless/ath/ath9k/mac.c -+++ b/drivers/net/wireless/ath/ath9k/mac.c -@@ -133,8 +133,16 @@ EXPORT_SYMBOL(ath9k_hw_updatetxtriglevel - - void ath9k_hw_abort_tx_dma(struct ath_hw *ah) - { -+ int maxdelay = 1000; - int i, q; - -+ if (ah->curchan) { -+ if (IS_CHAN_HALF_RATE(ah->curchan)) -+ maxdelay *= 2; -+ else if (IS_CHAN_QUARTER_RATE(ah->curchan)) -+ maxdelay *= 4; -+ } -+ - REG_WRITE(ah, AR_Q_TXD, AR_Q_TXD_M); - - REG_SET_BIT(ah, AR_PCU_MISC, AR_PCU_FORCE_QUIET_COLL | AR_PCU_CLEAR_VMF); -@@ -142,7 +150,7 @@ void ath9k_hw_abort_tx_dma(struct ath_hw - REG_SET_BIT(ah, AR_D_GBL_IFS_MISC, AR_D_GBL_IFS_MISC_IGNORE_BACKOFF); - - for (q = 0; q < AR_NUM_QCU; q++) { -- for (i = 0; i < 1000; i++) { -+ for (i = 0; i < maxdelay; i++) { - if (i) - udelay(5); - --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -200,6 +200,8 @@ static void ieee80211_send_addba_resp(st @@ -581,7 +56,7 @@ memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); else if (sdata->vif.type == NL80211_IFTYPE_STATION) memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN); -@@ -484,6 +485,7 @@ int ieee80211_start_tx_ba_session(struct +@@ -490,6 +491,7 @@ int ieee80211_start_tx_ba_session(struct sdata->vif.type != NL80211_IFTYPE_MESH_POINT && sdata->vif.type != NL80211_IFTYPE_AP_VLAN && sdata->vif.type != NL80211_IFTYPE_AP && @@ -607,19 +82,7 @@ TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT), --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c -@@ -206,8 +206,10 @@ static void ieee80211_set_default_queues - for (i = 0; i < IEEE80211_NUM_ACS; i++) { - if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) - sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE; -- else -+ else if (local->hw.queues >= IEEE80211_NUM_ACS) - sdata->vif.hw_queue[i] = i; -+ else -+ sdata->vif.hw_queue[i] = 0; - } - sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; - } -@@ -282,7 +284,6 @@ static int ieee80211_do_open(struct net_ +@@ -284,7 +284,6 @@ static int ieee80211_do_open(struct net_ { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = sdata->local; @@ -627,7 +90,7 @@ u32 changed = 0; int res; u32 hw_reconf_flags = 0; -@@ -428,28 +429,6 @@ static int ieee80211_do_open(struct net_ +@@ -430,28 +429,6 @@ static int ieee80211_do_open(struct net_ set_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -656,7 +119,7 @@ /* * set_multicast_list will be invoked by the networking core * which will check whether any increments here were done in -@@ -846,6 +825,72 @@ static void ieee80211_if_setup(struct ne +@@ -848,6 +825,72 @@ static void ieee80211_if_setup(struct ne dev->destructor = free_netdev; } @@ -729,7 +192,7 @@ static void ieee80211_iface_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = -@@ -950,6 +995,9 @@ static void ieee80211_iface_work(struct +@@ -952,6 +995,9 @@ static void ieee80211_iface_work(struct break; ieee80211_mesh_rx_queued_mgmt(sdata, skb); break; @@ -741,7 +204,7 @@ break; --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c -@@ -2283,6 +2283,7 @@ ieee80211_rx_h_action(struct ieee80211_r +@@ -2284,6 +2284,7 @@ ieee80211_rx_h_action(struct ieee80211_r sdata->vif.type != NL80211_IFTYPE_MESH_POINT && sdata->vif.type != NL80211_IFTYPE_AP_VLAN && sdata->vif.type != NL80211_IFTYPE_AP && @@ -749,7 +212,7 @@ sdata->vif.type != NL80211_IFTYPE_ADHOC) break; -@@ -2497,14 +2498,15 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_ +@@ -2498,14 +2499,15 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_ if (!ieee80211_vif_is_mesh(&sdata->vif) && sdata->vif.type != NL80211_IFTYPE_ADHOC && @@ -767,7 +230,7 @@ break; case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): -@@ -2838,10 +2840,16 @@ static int prepare_for_handlers(struct i +@@ -2839,10 +2841,16 @@ static int prepare_for_handlers(struct i } break; case NL80211_IFTYPE_WDS: @@ -804,172 +267,3 @@ WLAN_STA_CLEAR_PS_FILT, WLAN_STA_MFP, WLAN_STA_BLOCK_BA, ---- a/drivers/net/wireless/iwlwifi/iwl-agn.h -+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h -@@ -425,6 +425,7 @@ void iwl_testmode_cleanup(struct iwl_pri - #ifdef CONFIG_IWLWIFI_DEBUG - void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid); -+int iwl_alloc_traffic_mem(struct iwl_priv *priv); - #else - static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid) -@@ -510,7 +511,6 @@ void iwl_setup_deferred_work(struct iwl_ - int iwl_send_wimax_coex(struct iwl_priv *priv); - int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type); - void iwl_debug_config(struct iwl_priv *priv); --int iwl_alloc_traffic_mem(struct iwl_priv *priv); - void iwl_set_hw_params(struct iwl_priv *priv); - void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags); - int iwl_init_drv(struct iwl_priv *priv); ---- a/drivers/net/wireless/libertas/firmware.c -+++ b/drivers/net/wireless/libertas/firmware.c -@@ -5,6 +5,7 @@ - #include <linux/firmware.h> - #include <linux/firmware.h> - #include <linux/module.h> -+#include <linux/sched.h> - - #include "dev.h" - #include "decl.h" ---- a/drivers/net/wireless/ath/ath9k/recv.c -+++ b/drivers/net/wireless/ath/ath9k/recv.c -@@ -812,6 +812,7 @@ static bool ath9k_rx_accept(struct ath_c - is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && - test_bit(rx_stats->rs_keyix, common->tkip_keymap); - strip_mic = is_valid_tkip && ieee80211_is_data(fc) && -+ ieee80211_has_protected(fc) && - !(rx_stats->rs_status & - (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC | - ATH9K_RXERR_KEYMISS)); ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -1005,6 +1005,9 @@ static int ieee80211_change_station(stru - } - - if (params->vlan && params->vlan != sta->sdata->dev) { -+ bool prev_4addr = false; -+ bool new_4addr = false; -+ - vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - - if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN && -@@ -1020,9 +1023,25 @@ static int ieee80211_change_station(stru - } - - rcu_assign_pointer(vlansdata->u.vlan.sta, sta); -+ new_4addr = true; -+ } -+ -+ if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && -+ sta->sdata->u.vlan.sta) { -+ rcu_assign_pointer(sta->sdata->u.vlan.sta, NULL); -+ prev_4addr = true; - } - - sta->sdata = vlansdata; -+ -+ if (sta->sta_state == IEEE80211_STA_AUTHORIZED && -+ prev_4addr != new_4addr) { -+ if (new_4addr) -+ atomic_dec(&sta->sdata->bss->num_mcast_sta); -+ else -+ atomic_inc(&sta->sdata->bss->num_mcast_sta); -+ } -+ - ieee80211_send_layer2_update(sta); - } - ---- a/net/mac80211/debugfs_netdev.c -+++ b/net/mac80211/debugfs_netdev.c -@@ -394,7 +394,7 @@ static ssize_t ieee80211_if_parse_uapsd_ - __IEEE80211_IF_FILE_W(uapsd_max_sp_len); - - /* AP attributes */ --IEEE80211_IF_FILE(num_sta_authorized, u.ap.num_sta_authorized, ATOMIC); -+IEEE80211_IF_FILE(num_mcast_sta, u.ap.num_mcast_sta, ATOMIC); - IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC); - IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC); - -@@ -540,7 +540,7 @@ static void add_sta_files(struct ieee802 - - static void add_ap_files(struct ieee80211_sub_if_data *sdata) - { -- DEBUGFS_ADD(num_sta_authorized); -+ DEBUGFS_ADD(num_mcast_sta); - DEBUGFS_ADD(num_sta_ps); - DEBUGFS_ADD(dtim_count); - DEBUGFS_ADD(num_buffered_multicast); ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -282,7 +282,7 @@ struct ieee80211_if_ap { - u8 tim[sizeof(unsigned long) * BITS_TO_LONGS(IEEE80211_MAX_AID + 1)]; - struct sk_buff_head ps_bc_buf; - atomic_t num_sta_ps; /* number of stations in PS mode */ -- atomic_t num_sta_authorized; /* number of authorized stations */ -+ atomic_t num_mcast_sta; /* number of stations receiving multicast */ - int dtim_count; - bool dtim_bc_mc; - }; ---- a/net/mac80211/sta_info.c -+++ b/net/mac80211/sta_info.c -@@ -1417,15 +1417,19 @@ int sta_info_move_state(struct sta_info - if (sta->sta_state == IEEE80211_STA_AUTH) { - set_bit(WLAN_STA_ASSOC, &sta->_flags); - } else if (sta->sta_state == IEEE80211_STA_AUTHORIZED) { -- if (sta->sdata->vif.type == NL80211_IFTYPE_AP) -- atomic_dec(&sta->sdata->u.ap.num_sta_authorized); -+ if (sta->sdata->vif.type == NL80211_IFTYPE_AP || -+ (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && -+ !sta->sdata->u.vlan.sta)) -+ atomic_dec(&sta->sdata->bss->num_mcast_sta); - clear_bit(WLAN_STA_AUTHORIZED, &sta->_flags); - } - break; - case IEEE80211_STA_AUTHORIZED: - if (sta->sta_state == IEEE80211_STA_ASSOC) { -- if (sta->sdata->vif.type == NL80211_IFTYPE_AP) -- atomic_inc(&sta->sdata->u.ap.num_sta_authorized); -+ if (sta->sdata->vif.type == NL80211_IFTYPE_AP || -+ (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && -+ !sta->sdata->u.vlan.sta)) -+ atomic_inc(&sta->sdata->bss->num_mcast_sta); - set_bit(WLAN_STA_AUTHORIZED, &sta->_flags); - } - break; ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -306,7 +306,7 @@ ieee80211_tx_h_check_assoc(struct ieee80 - } - } else if (unlikely(tx->sdata->vif.type == NL80211_IFTYPE_AP && - ieee80211_is_data(hdr->frame_control) && -- !atomic_read(&tx->sdata->u.ap.num_sta_authorized))) { -+ !atomic_read(&tx->sdata->u.ap.num_mcast_sta))) { - /* - * No associated STAs - no need to send multicast - * frames. -@@ -1159,7 +1159,8 @@ ieee80211_tx_prepare(struct ieee80211_su - tx->sta = rcu_dereference(sdata->u.vlan.sta); - if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) - return TX_DROP; -- } else if (info->flags & IEEE80211_TX_CTL_INJECTED) { -+ } else if (info->flags & IEEE80211_TX_CTL_INJECTED || -+ tx->sdata->control_port_protocol == tx->skb->protocol) { - tx->sta = sta_info_get_bss(sdata, hdr->addr1); - } - if (!tx->sta) ---- a/net/wireless/scan.c -+++ b/net/wireless/scan.c -@@ -378,7 +378,11 @@ static int cmp_bss_core(struct cfg80211_ - b->len_information_elements); - } - -- return compare_ether_addr(a->bssid, b->bssid); -+ /* -+ * we can't use compare_ether_addr here since we need a < > operator. -+ * The binary return value of compare_ether_addr isn't enough -+ */ -+ return memcmp(a->bssid, b->bssid, sizeof(a->bssid)); - } - - static int cmp_bss(struct cfg80211_bss *a, |