diff options
Diffstat (limited to 'package/libertas/src/main.c')
-rw-r--r-- | package/libertas/src/main.c | 194 |
1 files changed, 138 insertions, 56 deletions
diff --git a/package/libertas/src/main.c b/package/libertas/src/main.c index 406d874075..91b2f2398a 100644 --- a/package/libertas/src/main.c +++ b/package/libertas/src/main.c @@ -6,7 +6,6 @@ #include <linux/moduleparam.h> #include <linux/delay.h> -#include <linux/freezer.h> #include <linux/etherdevice.h> #include <linux/netdevice.h> #include <linux/if_arp.h> @@ -256,7 +255,7 @@ static int lbs_add_rtap(struct lbs_private *priv); static void lbs_remove_rtap(struct lbs_private *priv); static int lbs_add_mesh(struct lbs_private *priv); static void lbs_remove_mesh(struct lbs_private *priv); - + /** * Get function for sysfs attribute rtap @@ -345,10 +344,10 @@ static ssize_t lbs_mesh_set(struct device *dev, if (enable == !!priv->mesh_dev) return count; - ret = lbs_mesh_config(priv, enable); + ret = lbs_mesh_config(priv, enable, priv->curbssparams.channel); if (ret) return ret; - + if (enable) lbs_add_mesh(priv); else @@ -402,7 +401,7 @@ static int lbs_dev_open(struct net_device *dev) netif_carrier_on(dev); } else { priv->infra_open = 1; - + if (priv->connect_status == LBS_CONNECTED) netif_carrier_on(dev); else @@ -434,7 +433,7 @@ static int lbs_mesh_stop(struct net_device *dev) netif_stop_queue(dev); netif_carrier_off(dev); - + spin_unlock_irq(&priv->driver_lock); return 0; } @@ -454,7 +453,7 @@ static int lbs_eth_stop(struct net_device *dev) priv->infra_open = 0; netif_stop_queue(dev); - + spin_unlock_irq(&priv->driver_lock); return 0; } @@ -477,6 +476,13 @@ static void lbs_tx_timeout(struct net_device *dev) to kick it somehow? */ lbs_host_to_card_done(priv); + /* More often than not, this actually happens because the + firmware has crapped itself -- rather than just a very + busy medium. So send a harmless command, and if/when + _that_ times out, we'll kick it in the head. */ + lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, + 0, 0, NULL); + lbs_deb_leave(LBS_DEB_TX); } @@ -489,19 +495,9 @@ void lbs_host_to_card_done(struct lbs_private *priv) priv->dnld_sent = DNLD_RES_RECEIVED; /* Wake main thread if commands are pending */ - if (!priv->cur_cmd) + if (!priv->cur_cmd || priv->tx_pending_len > 0) wake_up_interruptible(&priv->waitq); - /* Don't wake netif queues if we're in monitor mode and - a TX packet is already pending, or if there are commands - queued to be sent. */ - if (!priv->currenttxskb && list_empty(&priv->cmdpendingq)) { - if (priv->dev && priv->connect_status == LBS_CONNECTED) - netif_wake_queue(priv->dev); - - if (priv->mesh_dev && priv->mesh_connect_status == LBS_CONNECTED) - netif_wake_queue(priv->mesh_dev); - } spin_unlock_irqrestore(&priv->driver_lock, flags); } EXPORT_SYMBOL_GPL(lbs_host_to_card_done); @@ -663,8 +659,6 @@ static int lbs_thread(void *data) init_waitqueue_entry(&wait, current); - set_freezable(); - for (;;) { int shouldsleep; @@ -675,12 +669,16 @@ static int lbs_thread(void *data) set_current_state(TASK_INTERRUPTIBLE); spin_lock_irq(&priv->driver_lock); - if (priv->surpriseremoved) + if (kthread_should_stop()) shouldsleep = 0; /* Bye */ + else if (priv->surpriseremoved) + shouldsleep = 1; /* We need to wait until we're _told_ to die */ else if (priv->psstate == PS_STATE_SLEEP) shouldsleep = 1; /* Sleep mode. Nothing we can do till it wakes */ else if (priv->intcounter) shouldsleep = 0; /* Interrupt pending. Deal with it now */ + else if (priv->cmd_timed_out) + shouldsleep = 0; /* Command timed out. Recover */ else if (!priv->fw_ready) shouldsleep = 1; /* Firmware not ready. We're waiting for it */ else if (priv->dnld_sent) @@ -708,17 +706,19 @@ static int lbs_thread(void *data) set_current_state(TASK_RUNNING); remove_wait_queue(&priv->waitq, &wait); - try_to_freeze(); lbs_deb_thread("main-thread 333: intcounter=%d currenttxskb=%p dnld_sent=%d\n", priv->intcounter, priv->currenttxskb, priv->dnld_sent); - if (kthread_should_stop() || priv->surpriseremoved) { - lbs_deb_thread("main-thread: break from main thread: surpriseremoved=0x%x\n", - priv->surpriseremoved); + if (kthread_should_stop()) { + lbs_deb_thread("main-thread: break from main thread\n"); break; } + if (priv->surpriseremoved) { + lbs_deb_thread("adapter removed; waiting to die...\n"); + continue; + } spin_lock_irq(&priv->driver_lock); @@ -749,6 +749,26 @@ static int lbs_thread(void *data) spin_lock_irq(&priv->driver_lock); } + if (priv->cmd_timed_out && priv->cur_cmd) { + struct cmd_ctrl_node *cmdnode = priv->cur_cmd; + + if (++priv->nr_retries > 10) { + lbs_pr_info("Excessive timeouts submitting command %x\n", + le16_to_cpu(cmdnode->cmdbuf->command)); + lbs_complete_command(priv, cmdnode, -ETIMEDOUT); + priv->nr_retries = 0; + } else { + priv->cur_cmd = NULL; + lbs_pr_info("requeueing command %x due to timeout (#%d)\n", + le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries); + + /* Stick it back at the _top_ of the pending queue + for immediate resubmission */ + list_add(&cmdnode->list, &priv->cmdpendingq); + } + } + priv->cmd_timed_out = 0; + /* Any Card Event */ if (priv->hisregcpy & MRVDRV_CARDEVENT) { lbs_deb_thread("main-thread: Card Event Activity\n"); @@ -834,6 +854,58 @@ static int lbs_thread(void *data) return 0; } +static int lbs_suspend_callback(struct lbs_private *priv, unsigned long dummy, + struct cmd_header *cmd) +{ + lbs_deb_fw("HOST_SLEEP_ACTIVATE succeeded\n"); + + netif_device_detach(priv->dev); + if (priv->mesh_dev) + netif_device_detach(priv->mesh_dev); + + priv->fw_ready = 0; + return 0; +} + + +int lbs_suspend(struct lbs_private *priv) +{ + struct cmd_header cmd; + int ret; + + if (priv->wol_criteria == 0xffffffff) { + lbs_pr_info("Suspend attempt without configuring wake params!\n"); + return -EINVAL; + } + + memset(&cmd, 0, sizeof(cmd)); + + ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_ACTIVATE, &cmd, + sizeof(cmd), lbs_suspend_callback, 0); + if (ret) + lbs_pr_info("HOST_SLEEP_ACTIVATE failed: %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(lbs_suspend); + +int lbs_resume(struct lbs_private *priv) +{ + priv->fw_ready = 1; + + /* Firmware doesn't seem to give us RX packets any more + until we send it some command. Might as well update */ + lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, + 0, 0, NULL); + + netif_device_attach(priv->dev); + if (priv->mesh_dev) + netif_device_attach(priv->mesh_dev); + + return 0; +} +EXPORT_SYMBOL_GPL(lbs_resume); + /** * @brief This function downloads firmware image, gets * HW spec from firmware and set basic parameters to @@ -879,35 +951,21 @@ done: static void command_timer_fn(unsigned long data) { struct lbs_private *priv = (struct lbs_private *)data; - struct cmd_ctrl_node *node; unsigned long flags; - node = priv->cur_cmd; - if (node == NULL) { - lbs_deb_fw("ptempnode empty\n"); - return; - } + spin_lock_irqsave(&priv->driver_lock, flags); - if (!node->cmdbuf) { - lbs_deb_fw("cmd is NULL\n"); - return; + if (!priv->cur_cmd) { + lbs_pr_info("Command timer expired; no pending command\n"); + goto out; } - lbs_deb_fw("command_timer_fn fired, cmd %x\n", node->cmdbuf->command); - - if (!priv->fw_ready) - return; - - spin_lock_irqsave(&priv->driver_lock, flags); - priv->cur_cmd = NULL; - spin_unlock_irqrestore(&priv->driver_lock, flags); - - lbs_deb_fw("re-sending same command because of timeout\n"); - lbs_queue_cmd(priv, node, 0); + lbs_pr_info("Command %x timed out\n", le16_to_cpu(priv->cur_cmd->cmdbuf->command)); + priv->cmd_timed_out = 1; wake_up_interruptible(&priv->waitq); - - return; + out: + spin_unlock_irqrestore(&priv->driver_lock, flags); } static int lbs_init_adapter(struct lbs_private *priv) @@ -1055,6 +1113,9 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev) sprintf(priv->mesh_ssid, "mesh"); priv->mesh_ssid_len = 4; + priv->wol_criteria = 0xffffffff; + priv->wol_gpio = 0xff; + goto done; err_init_adapter: @@ -1130,8 +1191,33 @@ int lbs_start_card(struct lbs_private *priv) } if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) lbs_pr_err("cannot register lbs_rtap attribute\n"); - if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) - lbs_pr_err("cannot register lbs_mesh attribute\n"); + + /* Enable mesh, if supported, and work out which TLV it uses. + 0x100 + 291 is an unofficial value used in 5.110.20.pXX + 0x100 + 37 is the official value used in 5.110.21.pXX + but we check them in that order because 20.pXX doesn't + give an error -- it just silently fails. */ + + /* 5.110.20.pXX firmware will fail the command if the channel + doesn't match the existing channel. But only if the TLV + is correct. If the channel is wrong, _BOTH_ versions will + give an error to 0x100+291, and allow 0x100+37 to succeed. + It's just that 5.110.20.pXX will not have done anything + useful */ + + lbs_update_channel(priv); + priv->mesh_tlv = 0x100 + 291; + if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) { + priv->mesh_tlv = 0x100 + 37; + if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) + priv->mesh_tlv = 0; + } + if (priv->mesh_tlv) { + lbs_add_mesh(priv); + + if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) + lbs_pr_err("cannot register lbs_mesh attribute\n"); + } lbs_debugfs_init_one(priv, dev); @@ -1160,11 +1246,13 @@ int lbs_stop_card(struct lbs_private *priv) lbs_debugfs_remove_one(priv); device_remove_file(&dev->dev, &dev_attr_lbs_rtap); - device_remove_file(&dev->dev, &dev_attr_lbs_mesh); + if (priv->mesh_tlv) + device_remove_file(&dev->dev, &dev_attr_lbs_mesh); /* Flush pending command nodes */ spin_lock_irqsave(&priv->driver_lock, flags); list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { + cmdnode->result = -ENOENT; cmdnode->cmdwaitqwoken = 1; wake_up_interruptible(&cmdnode->cmdwait_q); } @@ -1347,12 +1435,6 @@ void lbs_interrupt(struct lbs_private *priv) lbs_deb_thread("lbs_interrupt: intcounter=%d\n", priv->intcounter); - if (!spin_trylock(&priv->driver_lock)) { - spin_unlock(&priv->driver_lock); - printk(KERN_CRIT "%s called without driver_lock held\n", __func__); - WARN_ON(1); - } - priv->intcounter++; if (priv->psstate == PS_STATE_SLEEP) |