summaryrefslogtreecommitdiff
path: root/openwrt/target
diff options
context:
space:
mode:
Diffstat (limited to 'openwrt/target')
-rwxr-xr-xopenwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig4
-rwxr-xr-xopenwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram26
-rwxr-xr-xopenwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig8
3 files changed, 19 insertions, 19 deletions
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
index 27336e112e..72d5b63ac7 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
@@ -88,10 +88,10 @@ END {
print "# pppoe: PPP over Ethernet"
print "# pptp: Point-to-Point tunneling Protocol"
print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
- print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
print ""
print "wan_proto=dhcp"
p("wan_ifname")
+ print "wan_device=\"" c["wan_ifname"] "\""
print "# wan_ipaddr=\"192.168.0.2\""
print "# wan_netmask=\"255.255.255.0\""
print "# wan_gateway=\"192.168.0.1\""
@@ -99,8 +99,6 @@ END {
print ""
print "## PPP over Ethernet and PPTP"
print "# wan_ifname=\"ppp0\""
- print "# pppoe_ifname=\"" c["wan_ifname"] "\""
- print "# pptp_ifname=\"" c["wan_ifname"] "\""
print "# pptp_server_ip=\"192.168.0.1\""
}
' > /etc/config/network
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
index 70fbd46624..a561b3965b 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
@@ -107,6 +107,14 @@ case "$(nvram get productid)" in
nvram set lan_ifnames="eth1 eth2"
nvram set wan_ifname="none"
;;
+ *)
+ # wl-500g defaults. these are placed here, because WL-HDD and WL-300g
+ # might have the same nvram settings.
+ [ "$(nvram get boardnum)" = "asusX" \
+ -a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+ nvram_default wan_device "eth1"
+ }
+ ;;
esac
# hacks for wap54g hardware
@@ -130,21 +138,12 @@ esac
nvram_default wl0id 0x4320
}
-WAN_PROTO="$(nvram get wan_proto)"
-[ "$WAN_PROTO" = "pptp" \
--o "$WAN_PROTO" = "pppoe" ] && {
- WAN_IFNAME="$(nvram get wan_ifname)"
- [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || {
- nvram set wan_ifname=ppp0
- nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME"
- }
-}
-
# defaults
nvram_default lan_ifname "br0"
nvram_default lan_ifnames "$FAILSAFE_ifnames"
nvram_default wan_ifname "vlan1"
+nvram_default wan_device "vlan1"
nvram_default wan_proto "dhcp"
nvram_default wl0_ssid OpenWrt
@@ -152,6 +151,13 @@ nvram_default wl0_mode ap
nvram_default wl0_infra 1
nvram_default wl0_radio 1
+WAN_PROTO="$(nvram get wan_proto)"
+WAN_IFNAME="$(nvram get wan_ifname)"
+case "$WAN_PROTO" in
+ pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
+ *) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
+esac
+
[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
# if default wifi mac, set two higher than the lan mac
nvram set il0macaddr=$(nvram get et0macaddr|
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
index 0cafa17402..72d5b63ac7 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
@@ -57,9 +57,8 @@ END {
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
- c["lan_ifnames"]="eth1 eth2"
+ c["lan_ifnames"]="eth0 eth1"
c["wan_ifname"]=""
- c["unused_ifnames"]="eth0"
}
print "#### VLAN configuration "
@@ -79,7 +78,6 @@ END {
print "# lan_gateway=\"192.168.1.1\""
print ""
- p("unused_ifnames")
print ""
print "#### WAN configuration"
@@ -90,10 +88,10 @@ END {
print "# pppoe: PPP over Ethernet"
print "# pptp: Point-to-Point tunneling Protocol"
print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
- print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
print ""
print "wan_proto=dhcp"
p("wan_ifname")
+ print "wan_device=\"" c["wan_ifname"] "\""
print "# wan_ipaddr=\"192.168.0.2\""
print "# wan_netmask=\"255.255.255.0\""
print "# wan_gateway=\"192.168.0.1\""
@@ -101,8 +99,6 @@ END {
print ""
print "## PPP over Ethernet and PPTP"
print "# wan_ifname=\"ppp0\""
- print "# pppoe_ifname=\"" c["wan_ifname"] "\""
- print "# pptp_ifname=\"" c["wan_ifname"] "\""
print "# pptp_server_ip=\"192.168.0.1\""
}
' > /etc/config/network