diff options
Diffstat (limited to 'openwrt/target/linux/linux-2.4')
| -rw-r--r-- | openwrt/target/linux/linux-2.4/README | 3 | ||||
| -rw-r--r-- | openwrt/target/linux/linux-2.4/broadcom.mk | 3 | ||||
| -rw-r--r-- | openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch | 278 |
3 files changed, 0 insertions, 284 deletions
diff --git a/openwrt/target/linux/linux-2.4/README b/openwrt/target/linux/linux-2.4/README index d5e2d6392e..8dff7fcccb 100644 --- a/openwrt/target/linux/linux-2.4/README +++ b/openwrt/target/linux/linux-2.4/README @@ -89,9 +89,6 @@ brcm/ 003-bcm47xx_cache_fixes.patch -004-diag_led.patch - OpenWrt diag (led and reset button) driver - ar7/ TI AR7 specific patches diff --git a/openwrt/target/linux/linux-2.4/broadcom.mk b/openwrt/target/linux/linux-2.4/broadcom.mk index 4fc1424909..bde9e1491d 100644 --- a/openwrt/target/linux/linux-2.4/broadcom.mk +++ b/openwrt/target/linux/linux-2.4/broadcom.mk @@ -6,9 +6,6 @@ ############################################################# # broadcom specific kmod packages -$(eval $(call KMOD_template,DIAG,diag,\ - $(MODULES_DIR)/kernel/drivers/net/diag/diag.o \ -)) $(eval $(call KMOD_template,BRCM_WL,brcm-wl,\ $(MODULES_DIR)/kernel/drivers/net/wl/wl.o \ ,CONFIG_WL)) diff --git a/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch b/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch deleted file mode 100644 index 7ec20df572..0000000000 --- a/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch +++ /dev/null @@ -1,278 +0,0 @@ -diff -urN linux-2.4.30.dev/drivers/net/Makefile linux-2.4.30.dev2/drivers/net/Makefile ---- linux-2.4.30.dev/drivers/net/Makefile 2005-08-22 01:41:45.930653216 +0200 -+++ linux-2.4.30.dev2/drivers/net/Makefile 2005-08-22 01:58:04.162939304 +0200 -@@ -41,6 +41,8 @@ - obj-$(CONFIG_ISDN) += slhc.o - endif - -+subdir-m += diag -+ - subdir-$(CONFIG_HND) += hnd - subdir-$(CONFIG_ET) += et - subdir-$(CONFIG_WL) += wl -diff -urN linux-2.4.30.dev/drivers/net/diag/Makefile linux-2.4.30.dev2/drivers/net/diag/Makefile ---- linux-2.4.30.dev/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.30.dev2/drivers/net/diag/Makefile 2005-08-22 00:12:23.655170000 +0200 -@@ -0,0 +1,13 @@ -+#$Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $ -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -+ -+O_TARGET := diag.o -+ -+MAC_OBJS := diag_led.o -+ -+export-objs := -+obj-y := $(MAC_OBJS) -+obj-m := $(O_TARGET) -+ -+include $(TOPDIR)/Rules.make -diff -urN linux-2.4.30.dev/drivers/net/diag/diag_led.c linux-2.4.30.dev2/drivers/net/diag/diag_led.c ---- linux-2.4.30.dev/drivers/net/diag/diag_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.30.dev2/drivers/net/diag/diag_led.c 2005-08-22 03:37:58.112053448 +0200 -@@ -0,0 +1,245 @@ -+/* -+ * diag_led.c - replacement diag module -+ * -+ * Copyright (C) 2004 Mike Baker, -+ * Imre Kaloz <kaloz@dune.hu> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * $Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $ -+ */ -+ -+/* -+ * ChangeLog: -+ * 2004/03/28 initial release -+ * 2004/08/26 asus & buffalo support added -+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added -+ * 2005/04/13 added licensing informations -+ * 2005/04/18 base reset polarity off initial readings -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/sysctl.h> -+#include <asm/io.h> -+#include <typedefs.h> -+#include <bcmdevs.h> -+#include <sbutils.h> -+ -+extern char * nvram_get(const char *name); -+static void *sbh; -+ -+// v2.x - - - - - -+#define DIAG_GPIO (1<<1) -+#define DMZ_GPIO (1<<7) -+ -+static void set_gpio(uint32 mask, uint32 value) { -+ sb_gpiocontrol(sbh,mask,0); -+ sb_gpioouten(sbh,mask,mask); -+ sb_gpioout(sbh,mask,value); -+} -+ -+static void v2_set_diag(u8 state) { -+ set_gpio(DIAG_GPIO,state); -+} -+static void v2_set_dmz(u8 state) { -+ set_gpio(DMZ_GPIO,state); -+} -+ -+// v1.x - - - - - -+#define LED_DIAG 0x13 -+#define LED_DMZ 0x12 -+ -+static void v1_set_diag(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); -+ } -+} -+static void v1_set_dmz(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); -+ } -+} -+ -+// - - - - - -+static void ignore(u8 ignored) {}; -+ -+// - - - - - -+#define BIT_DMZ 0x01 -+#define BIT_DIAG 0x04 -+ -+void (*set_diag)(u8 state); -+void (*set_dmz)(u8 state); -+ -+static unsigned int diag = 0; -+ -+static void diag_change() -+{ -+ set_diag(0xFF); // off -+ set_dmz(0xFF); // off -+ -+ if(diag & BIT_DIAG) -+ set_diag(0x00); // on -+ if(diag & BIT_DMZ) -+ set_dmz(0x00); // on -+} -+ -+static int proc_diag(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp) -+{ -+ int r; -+ r = proc_dointvec(table, write, filp, buffer, lenp); -+ if (write && !r) { -+ diag_change(); -+ } -+ return r; -+} -+ -+// - - - - - -+static unsigned char reset_gpio = 0; -+static unsigned char reset_polarity = 0; -+static unsigned int reset = 0; -+ -+static int proc_reset(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp) -+{ -+ -+ if (reset_gpio) { -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset=!(sb_gpioin(sbh)&reset_gpio); -+ -+ if (reset_polarity) reset=!reset; -+ } else { -+ reset=0; -+ } -+ -+ return proc_dointvec(table, write, filp, buffer, lenp); -+} -+ -+// - - - - - -+static struct ctl_table_header *diag_sysctl_header; -+ -+static ctl_table sys_diag[] = { -+ { -+ ctl_name: 2000, -+ procname: "diag", -+ data: &diag, -+ maxlen: sizeof(diag), -+ mode: 0644, -+ proc_handler: proc_diag -+ }, -+ { -+ ctl_name: 2001, -+ procname: "reset", -+ data: &reset, -+ maxlen: sizeof(reset), -+ mode: 0444, -+ proc_handler: proc_reset -+ }, -+ { 0 } -+}; -+ -+static int __init diag_init() -+{ -+ char *buf; -+ u32 board_type; -+ sbh = sb_kattach(); -+ sb_gpiosetcore(sbh); -+ -+ board_type = sb_boardtype(sbh); -+ printk(KERN_INFO "diag boardtype: %08x\n",board_type); -+ -+ set_diag=ignore; -+ set_dmz=ignore; -+ -+ buf=nvram_get("boardrev"); -+ if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) { -+ buf=nvram_get("boardtype")?:""; -+ if (!strcmp(buf,"bcm94710dev")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // wrt54g v1.x -+ set_diag=v1_set_diag; -+ set_dmz=v1_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"asusX")) { -+ //asus wl-500g -+ reset_gpio=(1<<6); -+ } -+ } -+ if (!strcmp(buf,"bcm94710ap")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // buffalo -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<4); -+ } -+ if (!strcmp(buf,"44")) { -+ //dell truemobile -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<0); -+ } -+ } -+ } else { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ //linksys -+ set_diag=v2_set_diag; -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"44")) { -+ //motorola -+ reset_gpio=(1<<5); -+ } -+ if (!strcmp(buf,"00")) { -+ //buffalo -+ reset_gpio=(1<<7); -+ } -+ if (!strcmp(buf,"45")) { -+ //wl-500g deluxe -+ reset_gpio=(1<<6); -+ } -+ } -+ -+ -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio); -+ -+ diag_sysctl_header = register_sysctl_table(sys_diag, 0); -+ diag_change(); -+ -+ return 0; -+} -+ -+static void __exit diag_exit() -+{ -+ unregister_sysctl_table(diag_sysctl_header); -+} -+ -+EXPORT_NO_SYMBOLS; -+MODULE_AUTHOR("openwrt.org"); -+MODULE_LICENSE("GPL"); -+ -+module_init(diag_init); -+module_exit(diag_exit); |