diff options
Diffstat (limited to 'openwrt/package/ppp')
20 files changed, 2459 insertions, 0 deletions
diff --git a/openwrt/package/ppp/Config.in b/openwrt/package/ppp/Config.in new file mode 100644 index 0000000000..1d4aecbfa2 --- /dev/null +++ b/openwrt/package/ppp/Config.in @@ -0,0 +1,37 @@ +config BR2_PACKAGE_PPP + tristate + prompt "PPP daemon" + default y + +config BR2_PACKAGE_PPP_PPPOE + tristate + prompt "PPP over Ethernet plugin" + default y + depends on BR2_PACKAGE_PPP + +config BR2_PACKAGE_PPP_RADIUS + tristate + prompt "PPP RADIUS plugin" + default m + depends on BR2_PACKAGE_PPP + +config BR2_PACKAGE_PPP_CHAT + tristate + prompt "chat utility" + default m + depends on BR2_PACKAGE_PPP + +config BR2_PACKAGE_PPPDUMP + tristate + prompt "pppdump utility" + default m + depends on BR2_PACKAGE_PPP + +config BR2_PACKAGE_PPPSTATS + tristate + prompt "pppstats utility" + default m + depends on BR2_PACKAGE_PPP + + + diff --git a/openwrt/package/ppp/Makefile b/openwrt/package/ppp/Makefile new file mode 100644 index 0000000000..b246a3db33 --- /dev/null +++ b/openwrt/package/ppp/Makefile @@ -0,0 +1,147 @@ +include $(TOPDIR)/rules.mk + +PKG_NAME := ppp +PKG_VERSION := 2.4.3 +PKG_RELEASE := 3 + +PKG_SOURCE_SITE := ftp://ftp.samba.org/pub/ppp/ +PKG_SOURCE_FILE := $(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_SOURCE_CAT := zcat +PKG_SOURCE_DIR := $(PKG_NAME)-$(PKG_VERSION) + +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_SOURCE_DIR) + +PKG_PPP := $(PACKAGE_DIR)/ppp_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk +PKG_PPP_PPPOE_PLUGIN := $(PACKAGE_DIR)/ppp-pppoe-plugin_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk +PKG_PPP_RADIUS_PLUGIN := $(PACKAGE_DIR)/ppp-radius-plugin_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk +PKG_PPPSTATS := $(PACKAGE_DIR)/pppstats_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk +PKG_PPPDUMP := $(PACKAGE_DIR)/pppdump_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk + +I_PPP := $(PKG_BUILD_DIR)/ipkg/ppp +I_PPP_PPPOE_PLUGIN := $(PKG_BUILD_DIR)/ipkg/ppp-pppoe-plugin +I_PPP_RADIUS_PLUGIN := $(PKG_BUILD_DIR)/ipkg/ppp-radius-plugin +I_PPPDUMP := $(PKG_BUILD_DIR)/ipkg/pppdump +I_PPPSTATS := $(PKG_BUILD_DIR)/ipkg/pppstats + +TARGETS := $(PKG_PPP) +ifneq ($(BR2_PACKAGE_PPP_PPPOE),) +TARGETS += $(PKG_PPP_PPPOE_PLUGIN) +endif +ifneq ($(BR2_PACKAGE_PPP_RADIUS),) +TARGETS += $(PKG_PPP_RADIUS_PLUGIN) +endif +ifneq ($(BR2_PACKAGE_PPPDUMP),) +TARGETS += $(PKG_PPPDUMP) +endif +ifneq ($(BR2_PACKAGE_PPPSTATS),) +TARGETS += $(PKG_PPPSTATS) +endif + +$(DL_DIR)/$(PKG_SOURCE_FILE): + mkdir -p $(DL_DIR) + $(WGET) -P $(DL_DIR) $(PKG_SOURCE_SITE)/$(PKG_SOURCE_FILE) + +$(PKG_BUILD_DIR)/.patched: $(DL_DIR)/$(PKG_SOURCE_FILE) + mkdir -p $(TOOL_BUILD_DIR) + $(PKG_SOURCE_CAT) $(DL_DIR)/$(PKG_SOURCE_FILE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + $(PATCH) $(PKG_BUILD_DIR) . $(PKG_NAME).patch + touch $(PKG_BUILD_DIR)/.patched + +$(PKG_BUILD_DIR)/.configured: $(PKG_BUILD_DIR)/.patched + (cd $(PKG_BUILD_DIR); \ + rm -f config.cache; \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --host=$(GNU_TARGET_NAME) \ + --build=$(GNU_HOST_NAME) \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --datadir=/usr/share \ + --infodir=/usr/share/info \ + --libexecdir=/usr/lib \ + --localstatedir=/var \ + --mandir=/usr/share/man \ + --sbindir=/usr/sbin \ + --sysconfdir=/etc \ + $(DISABLE_NLS)) + touch $(PKG_BUILD_DIR)/.configured + +$(PKG_BUILD_DIR)/pppd/pppd $(PKG_BUILD_DIR)/pppd/plugins/radius/radius.so: $(PKG_BUILD_DIR)/.configured + $(MAKE) -C $(PKG_BUILD_DIR) \ + CC=$(TARGET_CC) \ + COPTS="$(TARGET_CFLAGS)" \ + all + +$(PKG_PPP): $(PKG_BUILD_DIR)/pppd/pppd + mkdir -p $(I_PPP) + cp -af ./ipkg/ppp/* $(I_PPP) + $(SCRIPT_DIR)/make-ipkg-dir.sh $(I_PPP) control/ppp.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) + mkdir -p $(I_PPP)/usr/sbin + cp -af $(PKG_BUILD_DIR)/pppd/pppd $(I_PPP)/usr/sbin/ + $(STRIP) $(I_PPP)/usr/sbin/* + mkdir -p $(I_PPP)/usr/lib/pppd + cp $(PKG_BUILD_DIR)/pppd/plugins/*.so $(I_PPP)/usr/lib/pppd/ + $(STRIP) $(I_PPP)/usr/lib/pppd/*.so + mkdir -p $(I_PPP)/$(MODULES_SUBDIR) + cp $(MODULES_DIR)/kernel/drivers/net/ppp_async.o $(I_PPP)/$(MODULES_SUBDIR) + cp $(MODULES_DIR)/kernel/drivers/net/ppp_deflate.o $(I_PPP)/$(MODULES_SUBDIR) + cp $(MODULES_DIR)/kernel/drivers/net/bsd_comp.o $(I_PPP)/$(MODULES_SUBDIR) + $(IPKG_BUILD) $(I_PPP) $(PACKAGE_DIR) + +$(PKG_PPP_PPPOE_PLUGIN): $(PKG_PPP) + $(SCRIPT_DIR)/make-ipkg-dir.sh $(I_PPP_PPPOE_PLUGIN) control/ppp-pppoe-plugin.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) + mkdir -p $(I_PPP_PPPOE_PLUGIN)/usr/lib/pppd/rp-pppoe + cp -af $(PKG_BUILD_DIR)/pppd/plugins/rp-pppoe/rp-pppoe.so \ + $(I_PPP_PPPOE_PLUGIN)/usr/lib/pppd/rp-pppoe + $(STRIP) $(I_PPP_PPPOE_PLUGIN)/usr/lib/pppd/*/*.so + mkdir -p $(I_PPP_PPPOE_PLUGIN)/$(MODULES_SUBDIR) + cp $(MODULES_DIR)/kernel/drivers/net/pppo*.o $(I_PPP_PPPOE_PLUGIN)/$(MODULES_SUBDIR) + $(IPKG_BUILD) $(I_PPP_PPPOE_PLUGIN) $(PACKAGE_DIR) + +$(PKG_PPP_RADIUS_PLUGIN): $(PKG_PPP) + $(SCRIPT_DIR)/make-ipkg-dir.sh $(I_PPP_RADIUS_PLUGIN) control/ppp-radius-plugin.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) + mkdir -p $(I_PPP_RADIUS_PLUGIN)/usr/lib/pppd/radius + cp -af $(PKG_BUILD_DIR)/pppd/plugins/radius/radius.so \ + $(I_PPP_RADIUS_PLUGIN)/usr/lib/pppd/radius/ + $(STRIP) $(I_PPP_RADIUS_PLUGIN)/usr/lib/pppd/*/*.so + $(IPKG_BUILD) $(I_PPP_RADIUS_PLUGIN) $(PACKAGE_DIR) + +$(PKG_PPPDUMP): $(PKG_PPP) + $(SCRIPT_DIR)/make-ipkg-dir.sh $(I_PPPDUMP) control/pppdump.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) + mkdir -p $(I_PPPDUMP)/usr/sbin + cp -af $(PKG_BUILD_DIR)/pppdump/pppdump $(I_PPPDUMP)/usr/sbin/ + $(STRIP) $(I_PPPDUMP)/usr/sbin/* + $(IPKG_BUILD) $(I_PPPDUMP) $(PACKAGE_DIR) + +$(PKG_PPPSTATS): $(PKG_PPP) + $(SCRIPT_DIR)/make-ipkg-dir.sh $(I_PPPSTATS) control/pppstats.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) + mkdir -p $(I_PPPSTATS)/usr/sbin + cp -af $(PKG_BUILD_DIR)/pppstats/pppstats $(I_PPPSTATS)/usr/sbin/ + $(STRIP) $(I_PPPSTATS)/usr/sbin/* + $(IPKG_BUILD) $(I_PPPSTATS) $(PACKAGE_DIR) + + +source: $(DL_DIR)/$(PKG_SOURCE_FILE) +prepare: $(PKG_BUILD_DIR)/.patched +compile: $(TARGETS) +install: compile + $(IPKG) install $(PKG_PPP) +ifeq ($(BR2_PACKAGE_PPP_PPPOE),y) + $(IPKG) install $(PKG_PPP_PPPOE_PLUGIN) +endif +ifeq ($(BR2_PACKAGE_PPP_RADIUS),y) + $(IPKG) install $(PKG_PPP_RADIUS_PLUGIN) +endif +ifeq ($(BR2_PACKAGE_PPPDUMP),y) + $(IPKG) install $(PKG_PPPDUMP) +endif +ifeq ($(BR2_PACKAGE_PPPSTATS),y) + $(IPKG) install $(PKG_PPPSTATS) +endif + +clean: + rm -rf $(PKG_BUILD_DIR) + rm -f $(PKG_PPP) $(PKG_PPP_PPPOE_PLUGIN) $(PKG_PPP_RADIUS_PLUGIN) $(PKG_PPPSTATS) $(PKG_PPPDUMP) diff --git a/openwrt/package/ppp/control/chat.control b/openwrt/package/ppp/control/chat.control new file mode 100644 index 0000000000..7b422fc9f3 --- /dev/null +++ b/openwrt/package/ppp/control/chat.control @@ -0,0 +1,9 @@ +Package: chat +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: Utility for establishing a connection with the ISP's PPP server (e.g. via Modem) +Depends: ppp diff --git a/openwrt/package/ppp/control/ppp-pppoe-plugin.control b/openwrt/package/ppp/control/ppp-pppoe-plugin.control new file mode 100644 index 0000000000..33e6a32199 --- /dev/null +++ b/openwrt/package/ppp/control/ppp-pppoe-plugin.control @@ -0,0 +1,9 @@ +Package: ppp-pppoe-plugin +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: a PPPoE (PPP over Ethernet) plugin for PPP +Depends: ppp diff --git a/openwrt/package/ppp/control/ppp-radius-plugin.control b/openwrt/package/ppp/control/ppp-radius-plugin.control new file mode 100644 index 0000000000..609bf4210a --- /dev/null +++ b/openwrt/package/ppp/control/ppp-radius-plugin.control @@ -0,0 +1,9 @@ +Package: ppp-radius-plugin +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: a RADIUS plugin for PPP +Depends: ppp diff --git a/openwrt/package/ppp/control/ppp.control b/openwrt/package/ppp/control/ppp.control new file mode 100644 index 0000000000..68b2dffb7b --- /dev/null +++ b/openwrt/package/ppp/control/ppp.control @@ -0,0 +1,8 @@ +Package: ppp +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: a PPP (Point-to-Point Protocol) daemon (with MPPE/MPPC support) diff --git a/openwrt/package/ppp/control/pppdump.control b/openwrt/package/ppp/control/pppdump.control new file mode 100644 index 0000000000..fa5d0d967c --- /dev/null +++ b/openwrt/package/ppp/control/pppdump.control @@ -0,0 +1,9 @@ +Package: pppdump +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: an utility to read PPP record file +Depends: ppp diff --git a/openwrt/package/ppp/control/pppstats.control b/openwrt/package/ppp/control/pppstats.control new file mode 100644 index 0000000000..3f6c898d95 --- /dev/null +++ b/openwrt/package/ppp/control/pppstats.control @@ -0,0 +1,9 @@ +Package: pppstats +Priority: optional +Section: net +Version: 2.4.3-3 +Architecture: mipsel +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: an utility to report PPP statistics +Depends: ppp diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/CONTROL/conffiles b/openwrt/package/ppp/ipkg/ppp-radius-plugin/CONTROL/conffiles new file mode 100644 index 0000000000..70fe146d22 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/CONTROL/conffiles @@ -0,0 +1,2 @@ +/etc/ppp/radius.conf +/etc/ppp/radius/servers diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius-options b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius-options new file mode 100644 index 0000000000..1cb1867595 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius-options @@ -0,0 +1,2 @@ +plugin radius.so +radius-config-file /etc/ppp/radius.conf diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius.conf b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius.conf new file mode 100644 index 0000000000..0f24a8c7f7 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius.conf @@ -0,0 +1,8 @@ +authserver localhost:1812 +acctserver localhost:1813 +dictionary /etc/ppp/radius/dictionary +servers /etc/ppp/radius/servers +mapfile /dev/null +seqfile /tmp/radius.seq +radius_timeout 5 +radius_retries 3 diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary new file mode 100644 index 0000000000..706d1ce99c --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary @@ -0,0 +1,253 @@ +# +# Updated 97/06/13 to livingston-radius-2.01 miquels@cistron.nl +# +# This file contains dictionary translations for parsing +# requests and generating responses. All transactions are +# composed of Attribute/Value Pairs. The value of each attribute +# is specified as one of 4 data types. Valid data types are: +# +# string - 0-253 octets +# ipaddr - 4 octets in network byte order +# integer - 32 bit value in big endian order (high byte first) +# date - 32 bit value in big endian order - seconds since +# 00:00:00 GMT, Jan. 1, 1970 +# +# Enumerated values are stored in the user file with dictionary +# VALUE translations for easy administration. +# +# Example: +# +# ATTRIBUTE VALUE +# --------------- ----- +# Framed-Protocol = PPP +# 7 = 1 (integer encoding) +# + +# The dictionary format now supports vendor-specific attributes. +# Vendors are introduced like this: +# +# VENDOR vendor_name vendor_number +# +# For example: +# +# VENDOR RoaringPenguin 10055 +# +# Vendor-specific attributes have a fifth field with the name of the +# vendor. For example: +# +# ATTRIBUTE RP-Upstream-Speed-Limit 1 integer RoaringPenguin +# +# introduces a Roaring Penguin vendor-specific attribbute with name +# RP-Upstream-Speed-Limit, number 1, type integer and vendor RoaringPenguin. + +# +# Following are the proper new names. Use these. +# +ATTRIBUTE User-Name 1 string +ATTRIBUTE Password 2 string +ATTRIBUTE CHAP-Password 3 string +ATTRIBUTE NAS-IP-Address 4 ipaddr +ATTRIBUTE NAS-Port-Id 5 integer +ATTRIBUTE Service-Type 6 integer +ATTRIBUTE Framed-Protocol 7 integer +ATTRIBUTE Framed-IP-Address 8 ipaddr +ATTRIBUTE Framed-IP-Netmask 9 ipaddr +ATTRIBUTE Framed-Routing 10 integer +ATTRIBUTE Filter-Id 11 string +ATTRIBUTE Framed-MTU 12 integer +ATTRIBUTE Framed-Compression 13 integer +ATTRIBUTE Login-IP-Host 14 ipaddr +ATTRIBUTE Login-Service 15 integer +ATTRIBUTE Login-TCP-Port 16 integer +ATTRIBUTE Reply-Message 18 string +ATTRIBUTE Callback-Number 19 string +ATTRIBUTE Callback-Id 20 string +ATTRIBUTE Framed-Route 22 string +ATTRIBUTE Framed-IPX-Network 23 ipaddr +ATTRIBUTE State 24 string +ATTRIBUTE Class 25 string +ATTRIBUTE Session-Timeout 27 integer +ATTRIBUTE Idle-Timeout 28 integer +ATTRIBUTE Termination-Action 29 integer +ATTRIBUTE Called-Station-Id 30 string +ATTRIBUTE Calling-Station-Id 31 string +ATTRIBUTE NAS-Identifier 32 string +ATTRIBUTE Acct-Status-Type 40 integer +ATTRIBUTE Acct-Delay-Time 41 integer +ATTRIBUTE Acct-Input-Octets 42 integer +ATTRIBUTE Acct-Output-Octets 43 integer +ATTRIBUTE Acct-Session-Id 44 string +ATTRIBUTE Acct-Authentic 45 integer +ATTRIBUTE Acct-Session-Time 46 integer +ATTRIBUTE Acct-Input-Packets 47 integer +ATTRIBUTE Acct-Output-Packets 48 integer +ATTRIBUTE Acct-Terminate-Cause 49 integer +ATTRIBUTE Chap-Challenge 60 string +ATTRIBUTE NAS-Port-Type 61 integer +ATTRIBUTE Port-Limit 62 integer +ATTRIBUTE Connect-Info 77 string + +# RFC 2869 +ATTRIBUTE Acct-Interim-Interval 85 integer + +# +# Experimental Non Protocol Attributes used by Cistron-Radiusd +# +ATTRIBUTE Huntgroup-Name 221 string +ATTRIBUTE User-Category 1029 string +ATTRIBUTE Group-Name 1030 string +ATTRIBUTE Simultaneous-Use 1034 integer +ATTRIBUTE Strip-User-Name 1035 integer +ATTRIBUTE Fall-Through 1036 integer +ATTRIBUTE Add-Port-To-IP-Address 1037 integer +ATTRIBUTE Exec-Program 1038 string +ATTRIBUTE Exec-Program-Wait 1039 string +ATTRIBUTE Hint 1040 string + +# +# Non-Protocol Attributes +# These attributes are used internally by the server +# +ATTRIBUTE Expiration 21 date +ATTRIBUTE Auth-Type 1000 integer +ATTRIBUTE Menu 1001 string +ATTRIBUTE Termination-Menu 1002 string +ATTRIBUTE Prefix 1003 string +ATTRIBUTE Suffix 1004 string +ATTRIBUTE Group 1005 string +ATTRIBUTE Crypt-Password 1006 string +ATTRIBUTE Connect-Rate 1007 integer + +# +# Experimental, implementation specific attributes +# +# Limit session traffic +ATTRIBUTE Session-Octets-Limit 227 integer +# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out) +ATTRIBUTE Octets-Direction 228 integer + +# +# Integer Translations +# + +# User Types + +VALUE Service-Type Login-User 1 +VALUE Service-Type Framed-User 2 +VALUE Service-Type Callback-Login-User 3 +VALUE Service-Type Callback-Framed-User 4 +VALUE Service-Type Outbound-User 5 +VALUE Service-Type Administrative-User 6 +VALUE Service-Type NAS-Prompt-User 7 + +# Framed Protocols + +VALUE Framed-Protocol PPP 1 +VALUE Framed-Protocol SLIP 2 + +# Framed Routing Values + +VALUE Framed-Routing None 0 +VALUE Framed-Routing Broadcast 1 +VALUE Framed-Routing Listen 2 +VALUE Framed-Routing Broadcast-Listen 3 + +# Framed Compression Types + +VALUE Framed-Compression None 0 +VALUE Framed-Compression Van-Jacobson-TCP-IP 1 + +# Login Services + +VALUE Login-Service Telnet 0 +VALUE Login-Service Rlogin 1 +VALUE Login-Service TCP-Clear 2 +VALUE Login-Service PortMaster 3 + +# Status Types + +VALUE Acct-Status-Type Start 1 +VALUE Acct-Status-Type Stop 2 +VALUE Acct-Status-Type Accounting-On 7 +VALUE Acct-Status-Type Accounting-Off 8 + +# Authentication Types + +VALUE Acct-Authentic RADIUS 1 +VALUE Acct-Authentic Local 2 +VALUE Acct-Authentic PowerLink128 100 + +# Termination Options + +VALUE Termination-Action Default 0 +VALUE Termination-Action RADIUS-Request 1 + +# NAS Port Types, available in 3.3.1 and later + +VALUE NAS-Port-Type Async 0 +VALUE NAS-Port-Type Sync 1 +VALUE NAS-Port-Type ISDN 2 +VALUE NAS-Port-Type ISDN-V120 3 +VALUE NAS-Port-Type ISDN-V110 4 + +# Acct Terminate Causes, available in 3.3.2 and later + +VALUE Acct-Terminate-Cause User-Request 1 +VALUE Acct-Terminate-Cause Lost-Carrier 2 +VALUE Acct-Terminate-Cause Lost-Service 3 +VALUE Acct-Terminate-Cause Idle-Timeout 4 +VALUE Acct-Terminate-Cause Session-Timeout 5 +VALUE Acct-Terminate-Cause Admin-Reset 6 +VALUE Acct-Terminate-Cause Admin-Reboot 7 +VALUE Acct-Terminate-Cause Port-Error 8 +VALUE Acct-Terminate-Cause NAS-Error 9 +VALUE Acct-Terminate-Cause NAS-Request 10 +VALUE Acct-Terminate-Cause NAS-Reboot 11 +VALUE Acct-Terminate-Cause Port-Unneeded 12 +VALUE Acct-Terminate-Cause Port-Preempted 13 +VALUE Acct-Terminate-Cause Port-Suspended 14 +VALUE Acct-Terminate-Cause Service-Unavailable 15 +VALUE Acct-Terminate-Cause Callback 16 +VALUE Acct-Terminate-Cause User-Error 17 +VALUE Acct-Terminate-Cause Host-Request 18 + +# +# Non-Protocol Integer Translations +# + +VALUE Auth-Type Local 0 +VALUE Auth-Type System 1 +VALUE Auth-Type SecurID 2 +VALUE Auth-Type Crypt-Local 3 +VALUE Auth-Type Reject 4 + +# +# Cistron extensions +# +VALUE Auth-Type Pam 253 +VALUE Auth-Type None 254 + +# +# Experimental Non-Protocol Integer Translations for Cistron-Radiusd +# +VALUE Fall-Through No 0 +VALUE Fall-Through Yes 1 +VALUE Add-Port-To-IP-Address No 0 +VALUE Add-Port-To-IP-Address Yes 1 + +# +# Configuration Values +# uncomment these two lines to turn account expiration on +# + +#VALUE Server-Config Password-Expiration 30 +#VALUE Server-Config Password-Warning 5 + +# Octets-Direction +VALUE Octets-Direction Sum 0 +VALUE Octets-Direction Input 1 +VALUE Octets-Direction Output 2 +VALUE Octets-Direction MaxOveral 3 +VALUE Octets-Direction MaxSession 4 + +INCLUDE /etc/ppp/radius/dictionary.microsoft diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.asnet b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.asnet new file mode 100644 index 0000000000..337d1e1407 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.asnet @@ -0,0 +1,3 @@ +VENDOR ASNET 50000 +ATTRIBUTE Speed-Down 1 string ASNET +ATTRIBUTE Speed-Up 2 string ASNET diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.microsoft b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.microsoft new file mode 100644 index 0000000000..09fdbba63f --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/dictionary.microsoft @@ -0,0 +1,81 @@ +# +# Microsoft's VSA's, from RFC 2548 +# +# $Id$ +# + +VENDOR Microsoft 311 Microsoft + +ATTRIBUTE MS-CHAP-Response 1 string Microsoft +ATTRIBUTE MS-CHAP-Error 2 string Microsoft +ATTRIBUTE MS-CHAP-CPW-1 3 string Microsoft +ATTRIBUTE MS-CHAP-CPW-2 4 string Microsoft +ATTRIBUTE MS-CHAP-LM-Enc-PW 5 string Microsoft +ATTRIBUTE MS-CHAP-NT-Enc-PW 6 string Microsoft +ATTRIBUTE MS-MPPE-Encryption-Policy 7 string Microsoft +# This is referred to as both singular and plural in the RFC. +# Plural seems to make more sense. +ATTRIBUTE MS-MPPE-Encryption-Type 8 string Microsoft +ATTRIBUTE MS-MPPE-Encryption-Types 8 string Microsoft +ATTRIBUTE MS-RAS-Vendor 9 integer Microsoft +ATTRIBUTE MS-CHAP-Domain 10 string Microsoft +ATTRIBUTE MS-CHAP-Challenge 11 string Microsoft +ATTRIBUTE MS-CHAP-MPPE-Keys 12 string Microsoft +ATTRIBUTE MS-BAP-Usage 13 integer Microsoft +ATTRIBUTE MS-Link-Utilization-Threshold 14 integer Microsoft +ATTRIBUTE MS-Link-Drop-Time-Limit 15 integer Microsoft +ATTRIBUTE MS-MPPE-Send-Key 16 string Microsoft +ATTRIBUTE MS-MPPE-Recv-Key 17 string Microsoft +ATTRIBUTE MS-RAS-Version 18 string Microsoft +ATTRIBUTE MS-Old-ARAP-Password 19 string Microsoft +ATTRIBUTE MS-New-ARAP-Password 20 string Microsoft +ATTRIBUTE MS-ARAP-PW-Change-Reason 21 integer Microsoft + +ATTRIBUTE MS-Filter 22 string Microsoft +ATTRIBUTE MS-Acct-Auth-Type 23 integer Microsoft +ATTRIBUTE MS-Acct-EAP-Type 24 integer Microsoft + +ATTRIBUTE MS-CHAP2-Response 25 string Microsoft +ATTRIBUTE MS-CHAP2-Success 26 string Microsoft +ATTRIBUTE MS-CHAP2-CPW 27 string Microsoft + +ATTRIBUTE MS-Primary-DNS-Server 28 ipaddr Microsoft +ATTRIBUTE MS-Secondary-DNS-Server 29 ipaddr Microsoft +ATTRIBUTE MS-Primary-NBNS-Server 30 ipaddr Microsoft +ATTRIBUTE MS-Secondary-NBNS-Server 31 ipaddr Microsoft + +#ATTRIBUTE MS-ARAP-Challenge 33 string Microsoft + + +# +# Integer Translations +# + +# MS-BAP-Usage Values + +VALUE MS-BAP-Usage Not-Allowed 0 +VALUE MS-BAP-Usage Allowed 1 +VALUE MS-BAP-Usage Required 2 + +# MS-ARAP-Password-Change-Reason Values + +VALUE MS-ARAP-PW-Change-Reason Just-Change-Password 1 +VALUE MS-ARAP-PW-Change-Reason Expired-Password 2 +VALUE MS-ARAP-PW-Change-Reason Admin-Requires-Password-Change 3 +VALUE MS-ARAP-PW-Change-Reason Password-Too-Short 4 + +# MS-Acct-Auth-Type Values + +VALUE MS-Acct-Auth-Type PAP 1 +VALUE MS-Acct-Auth-Type CHAP 2 +VALUE MS-Acct-Auth-Type MS-CHAP-1 3 +VALUE MS-Acct-Auth-Type MS-CHAP-2 4 +VALUE MS-Acct-Auth-Type EAP 5 + +# MS-Acct-EAP-Type Values + +VALUE MS-Acct-EAP-Type MD5 4 +VALUE MS-Acct-EAP-Type OTP 5 +VALUE MS-Acct-EAP-Type Generic-Token-Card 6 +VALUE MS-Acct-EAP-Type TLS 13 + diff --git a/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/servers b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/servers new file mode 100644 index 0000000000..0c5b3b9add --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp-radius-plugin/etc/ppp/radius/servers @@ -0,0 +1 @@ +localhost secret diff --git a/openwrt/package/ppp/ipkg/ppp/CONTROL/conffiles b/openwrt/package/ppp/ipkg/ppp/CONTROL/conffiles new file mode 100644 index 0000000000..8ad17eb436 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp/CONTROL/conffiles @@ -0,0 +1,2 @@ +/etc/ppp/chap-secrets +/etc/ppp/options diff --git a/openwrt/package/ppp/ipkg/ppp/etc/ppp/chap-secrets b/openwrt/package/ppp/ipkg/ppp/etc/ppp/chap-secrets new file mode 100644 index 0000000000..6ab76e49e9 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp/etc/ppp/chap-secrets @@ -0,0 +1 @@ +#USERNAME PROVIDER PASSWORD IPADDRESS diff --git a/openwrt/package/ppp/ipkg/ppp/etc/ppp/options b/openwrt/package/ppp/ipkg/ppp/etc/ppp/options new file mode 100644 index 0000000000..77170e960a --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp/etc/ppp/options @@ -0,0 +1 @@ +#debug diff --git a/openwrt/package/ppp/ipkg/ppp/etc/ppp/peers/sample b/openwrt/package/ppp/ipkg/ppp/etc/ppp/peers/sample new file mode 100644 index 0000000000..492239c6d3 --- /dev/null +++ b/openwrt/package/ppp/ipkg/ppp/etc/ppp/peers/sample @@ -0,0 +1,3 @@ +#name USERNAME +#remotename PROVIDER +#file /etc/ppp/sample-options diff --git a/openwrt/package/ppp/ppp.patch b/openwrt/package/ppp/ppp.patch new file mode 100644 index 0000000000..cb69791580 --- /dev/null +++ b/openwrt/package/ppp/ppp.patch @@ -0,0 +1,1865 @@ +diff -ruN ppp-2.4.3-orig/chat/Makefile.linux ppp-2.4.3-3/chat/Makefile.linux +--- ppp-2.4.3-orig/chat/Makefile.linux 2004-11-03 12:51:47.000000000 +0100 ++++ ppp-2.4.3-3/chat/Makefile.linux 2004-12-05 17:42:43.000000000 +0100 +@@ -25,7 +25,7 @@ + + install: chat + mkdir -p $(BINDIR) +- $(INSTALL) -s -c chat $(BINDIR) ++ $(INSTALL) -c chat $(BINDIR) + $(INSTALL) -c -m 644 chat.8 $(MANDIR) + + clean: +diff -ruN ppp-2.4.3-orig/include/linux/ppp-comp.h ppp-2.4.3-3/include/linux/ppp-comp.h +--- ppp-2.4.3-orig/include/linux/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 ++++ ppp-2.4.3-3/include/linux/ppp-comp.h 2004-12-16 00:50:53.000000000 +0100 +@@ -36,7 +36,7 @@ + */ + + /* +- * ==FILEVERSION 20020319== ++ * ==FILEVERSION 20020715== + * + * NOTE TO MAINTAINERS: + * If you modify this file at all, please set the above date. +@@ -56,10 +56,10 @@ + */ + + #ifndef DO_BSD_COMPRESS +-#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */ ++#define DO_BSD_COMPRESS 0 /* by default, don't include BSD-Compress */ + #endif + #ifndef DO_DEFLATE +-#define DO_DEFLATE 1 /* by default, include Deflate */ ++#define DO_DEFLATE 0 /* by default, don't include Deflate */ + #endif + #define DO_PREDICTOR_1 0 + #define DO_PREDICTOR_2 0 +@@ -86,7 +86,7 @@ + + /* Compress a packet */ + int (*compress) (void *state, unsigned char *rptr, +- unsigned char *obuf, int isize, int osize); ++ unsigned char *obuf, int isize, int osize); + + /* Return compression statistics */ + void (*comp_stat) (void *state, struct compstat *stats); +@@ -107,7 +107,7 @@ + + /* Decompress a packet. */ + int (*decompress) (void *state, unsigned char *ibuf, int isize, +- unsigned char *obuf, int osize); ++ unsigned char *obuf, int osize); + + /* Update state for an incompressible packet received */ + void (*incomp) (void *state, unsigned char *ibuf, int icnt); +@@ -288,6 +288,33 @@ + opts |= MPPE_OPT_UNKNOWN; \ + } while (/* CONSTCOND */ 0) + ++/* MPPE/MPPC definitions by J.D.*/ ++#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ ++#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ ++#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ ++#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ ++#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ ++ ++/* ++ * Definitions for Stac LZS. ++ */ ++ ++#define CI_LZS 17 /* config option for Stac LZS */ ++#define CILEN_LZS 5 /* length of config option */ ++ ++#define LZS_OVHD 4 /* max. LZS overhead */ ++#define LZS_HIST_LEN 2048 /* LZS history size */ ++#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ ++ ++#define LZS_MODE_NONE 0 ++#define LZS_MODE_LCB 1 ++#define LZS_MODE_CRC 2 ++#define LZS_MODE_SEQ 3 ++#define LZS_MODE_EXT 4 ++ ++#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ ++#define LZS_EXT_BIT_COMP 0x20 /* bit C */ ++ + /* + * Definitions for other, as yet unsupported, compression methods. + */ +diff -ruN ppp-2.4.3-orig/include/net/ppp-comp.h ppp-2.4.3-3/include/net/ppp-comp.h +--- ppp-2.4.3-orig/include/net/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100 ++++ ppp-2.4.3-3/include/net/ppp-comp.h 2004-12-16 00:51:06.000000000 +0100 +@@ -43,10 +43,10 @@ + * various compression methods. + */ + #ifndef DO_BSD_COMPRESS +-#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */ ++#define DO_BSD_COMPRESS 0 /* by default, don't include BSD-Compress */ + #endif + #ifndef DO_DEFLATE +-#define DO_DEFLATE 1 /* by default, include Deflate */ ++#define DO_DEFLATE 0 /* by default, don't include Deflate */ + #endif + #define DO_PREDICTOR_1 0 + #define DO_PREDICTOR_2 0 +@@ -255,6 +255,33 @@ + opts |= MPPE_OPT_UNKNOWN; \ + } while (/* CONSTCOND */ 0) + ++/* MPPE/MPPC definitions by J.D.*/ ++#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */ ++#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */ ++#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */ ++#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */ ++#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */ ++ ++/* ++ * Definitions for Stac LZS. ++ */ ++ ++#define CI_LZS 17 /* config option for Stac LZS */ ++#define CILEN_LZS 5 /* length of config option */ ++ ++#define LZS_OVHD 4 /* max. LZS overhead */ ++#define LZS_HIST_LEN 2048 /* LZS history size */ ++#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ ++ ++#define LZS_MODE_NONE 0 ++#define LZS_MODE_LCB 1 ++#define LZS_MODE_CRC 2 ++#define LZS_MODE_SEQ 3 ++#define LZS_MODE_EXT 4 ++ ++#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ ++#define LZS_EXT_BIT_COMP 0x20 /* bit C */ ++ + /* + * Definitions for other, as yet unsupported, compression methods. + */ +diff -ruN ppp-2.4.3-orig/pppd/Makefile.linux ppp-2.4.3-3/pppd/Makefile.linux +--- ppp-2.4.3-orig/pppd/Makefile.linux 2004-11-13 13:02:22.000000000 +0100 ++++ ppp-2.4.3-3/pppd/Makefile.linux 2004-12-16 04:43:41.000000000 +0100 +@@ -48,19 +48,19 @@ + # Uncomment the next line to include support for PPP packet filtering. + # This requires that the libpcap library and headers be installed + # and that the kernel driver support PPP packet filtering. +-FILTER=y ++#FILTER=y + + # Uncomment the next line to enable multilink PPP (enabled by default) + # Linux distributions: Please leave multilink ENABLED in your builds + # of pppd! +-HAVE_MULTILINK=y ++#HAVE_MULTILINK=y + + # Uncomment the next line to enable the TDB database (enabled by default.) + # If you enable multilink, then TDB is automatically enabled also. + # Linux distributions: Please leave TDB ENABLED in your builds. +-USE_TDB=y ++#USE_TDB=y + +-HAS_SHADOW=y ++#HAS_SHADOW=y + #USE_PAM=y + #HAVE_INET6=y + +@@ -77,7 +77,7 @@ + + INCLUDE_DIRS= -I../include + +-COMPILE_FLAGS= -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MMAP ++COMPILE_FLAGS= -DHAVE_PATHS_H -DHAVE_MMAP + + CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS) + +@@ -99,7 +99,7 @@ + CFLAGS += -DUSE_SRP -DOPENSSL -I/usr/local/ssl/include + LIBS += -lsrp -L/usr/local/ssl/lib -lcrypto + TARGETS += srp-entry +-EXTRAINSTALL = $(INSTALL) -s -c -m 555 srp-entry $(BINDIR)/srp-entry ++EXTRAINSTALL = $(INSTALL) -c -m 555 srp-entry $(BINDIR)/srp-entry + MANPAGES += srp-entry.8 + EXTRACLEAN += srp-entry.o + NEEDDES=y +@@ -117,12 +117,12 @@ + #LIBS += -lshadow $(LIBS) + endif + +-ifneq ($(wildcard /usr/include/crypt.h),) ++#ifneq ($(wildcard /usr/include/crypt.h),) + CFLAGS += -DHAVE_CRYPT_H=1 +-endif +-ifneq ($(wildcard /usr/lib/libcrypt.*),) ++#endif ++#ifneq ($(wildcard /usr/lib/libcrypt.*),) + LIBS += -lcrypt +-endif ++#endif + + ifdef NEEDDES + ifndef USE_CRYPT +@@ -202,7 +202,7 @@ + install: pppd + mkdir -p $(BINDIR) $(MANDIR) + $(EXTRAINSTALL) +- $(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd ++ $(INSTALL) -c -m 555 pppd $(BINDIR)/pppd + if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \ + chmod o-rx,u+s $(BINDIR)/pppd; fi + $(INSTALL) -c -m 444 pppd.8 $(MANDIR) +diff -ruN ppp-2.4.3-orig/pppd/ccp.c ppp-2.4.3-3/pppd/ccp.c +--- ppp-2.4.3-orig/pppd/ccp.c 2004-11-13 03:28:15.000000000 +0100 ++++ ppp-2.4.3-3/pppd/ccp.c 2004-12-05 17:51:27.000000000 +0100 +@@ -62,12 +62,10 @@ + static char bsd_value[8]; + static char deflate_value[8]; + +-/* +- * Option variables. +- */ + #ifdef MPPE +-bool refuse_mppe_stateful = 1; /* Allow stateful mode? */ +-#endif ++static int setmppe(char **); ++static int setnomppe(void); ++#endif /* MPPE */ + + static option_t ccp_option_list[] = { + { "noccp", o_bool, &ccp_protent.enabled_flag, +@@ -108,54 +106,36 @@ + "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, + &ccp_allowoptions[0].predictor_1 }, + ++ { "lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_PRIO }, ++ { "+lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_ALIAS | OPT_PRIO }, ++ { "nolzs", o_bool, &ccp_wantoptions[0].lzs, ++ "don't allow Stac LZS", OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].lzs }, ++ { "-lzs", o_bool, &ccp_wantoptions[0].lzs, ++ "don't allow Stac LZS", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].lzs }, ++ + #ifdef MPPE +- /* MPPE options are symmetrical ... we only set wantoptions here */ +- { "require-mppe", o_bool, &ccp_wantoptions[0].mppe, +- "require MPPE encryption", +- OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, +- { "+mppe", o_bool, &ccp_wantoptions[0].mppe, +- "require MPPE encryption", +- OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, +- { "nomppe", o_bool, &ccp_wantoptions[0].mppe, +- "don't allow MPPE encryption", OPT_PRIO }, +- { "-mppe", o_bool, &ccp_wantoptions[0].mppe, +- "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO }, +- +- /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */ +- { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 40-bit encryption", +- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, +- { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 40-bit encryption", +- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, +- &ccp_wantoptions[0].mppe }, +- +- { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, +- { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "require MPPE 128-bit encryption", +- OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, +- { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 128-bit encryption", +- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, +- { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe, +- "don't allow MPPE 128-bit encryption", +- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, +- &ccp_wantoptions[0].mppe }, +- +- /* strange one; we always request stateless, but will we allow stateful? */ +- { "mppe-stateful", o_bool, &refuse_mppe_stateful, +- "allow MPPE stateful mode", OPT_PRIO }, +- { "nomppe-stateful", o_bool, &refuse_mppe_stateful, +- "disallow MPPE stateful mode", OPT_PRIO | 1 }, ++ { "mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "request MPPC compression", 1, &ccp_allowoptions[0].mppc }, ++ { "+mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "request MPPC compression", 1, &ccp_allowoptions[0].mppc, OPT_ALIAS }, ++ { "nomppc", o_bool, &ccp_wantoptions[0].mppc, ++ "don't allow MPPC compression", OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].mppc }, ++ { "-mppc", o_bool, &ccp_wantoptions[0].mppc, ++ "don't allow MPPC compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, ++ &ccp_allowoptions[0].mppc }, ++ { "mppe", o_special, (void *)setmppe, ++ "request MPPE encryption" }, ++ { "+mppe", o_special, (void *)setmppe, ++ "request MPPE encryption" }, ++ { "nomppe", o_special_noarg, (void *)setnomppe, ++ "don't allow MPPE encryption" }, ++ { "-mppe", o_special_noarg, (void *)setnomppe, ++ "don't allow MPPE encryption" }, + #endif /* MPPE */ + + { NULL } +@@ -241,7 +221,7 @@ + */ + #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \ + || (opt).predictor_1 || (opt).predictor_2 \ +- || (opt).mppe) ++ || (opt).lzs || (opt).mppc || (opt).mppe) + + /* + * Local state (mainly for handling reset-reqs and reset-acks). +@@ -344,6 +324,100 @@ + return 1; + } + ++#ifdef MPPE ++/* ++ * Functions called from config options ++ */ ++/* ++ MPPE suboptions: ++ required - require MPPE; disconnect if peer doesn't support it ++ stateless - use stateless mode ++ no40 - disable 40 bit keys ++ no56 - disable 56 bit keys ++ no128 - disable 128 bit keys ++*/ ++int setmppe(char **argv) ++{ ++ int i; ++ char *str, cmdbuf[16]; ++ ++ ccp_allowoptions[0].mppe = 1; ++ ccp_allowoptions[0].mppe_40 = 1; ++ ccp_allowoptions[0].mppe_56 = 1; ++ ccp_allowoptions[0].mppe_128 = 1; ++ ccp_allowoptions[0].mppe_stateless = 0; ++ ccp_wantoptions[0].mppe = 0; ++ ++ str = *argv; ++ ++ while (1) { ++ i = 0; ++ memset(cmdbuf, '\0', 16); ++ while ((i < 16) && (*str != ',') && (*str != '\0')) ++ cmdbuf[i++] = *str++; ++ cmdbuf[i] = '\0'; ++ if (!strncasecmp(cmdbuf, "no40", strlen("no40"))) { ++ ccp_allowoptions[0].mppe_40 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "no56", strlen("no56"))) { ++ ccp_allowoptions[0].mppe_56 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "no128", strlen("no128"))) { ++ ccp_allowoptions[0].mppe_128 = 0; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "stateless", strlen("stateless"))) { ++ ccp_allowoptions[0].mppe_stateless = 1; ++ goto next_param; ++ } else if (!strncasecmp(cmdbuf, "required", strlen("required"))) { ++ ccp_wantoptions[0].mppe = 1; ++ goto next_param; ++ } else { ++ option_error("invalid parameter '%s' for mppe option", cmdbuf); ++ return 0; ++ } ++ ++ next_param: ++ if (*str == ',') { ++ str++; ++ continue; ++ } ++ if (*str == '\0') { ++ if (!(ccp_allowoptions[0].mppe_40 || ccp_allowoptions[0].mppe_56 || ++ ccp_allowoptions[0].mppe_128)) { ++ if (ccp_wantoptions[0].mppe == 1) { ++ option_error("You require MPPE but you have switched off " ++ "all encryption key lengths."); ++ return 0; ++ } ++ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_stateless = ++ ccp_allowoptions[0].mppe_stateless = 0; ++ } else { ++ ccp_allowoptions[0].mppe = 1; ++ ccp_wantoptions[0].mppe_stateless = ++ ccp_allowoptions[0].mppe_stateless; ++ if (ccp_wantoptions[0].mppe == 1) { ++ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40; ++ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56; ++ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128; ++ } ++ } ++ return 1; ++ } ++ } ++} ++ ++int setnomppe(void) ++{ ++ ccp_wantoptions[0].mppe = ccp_allowoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_40 = ccp_allowoptions[0].mppe_40 = 0; ++ ccp_wantoptions[0].mppe_56 = ccp_allowoptions[0].mppe_56 = 0; ++ ccp_wantoptions[0].mppe_128 = ccp_allowoptions[0].mppe_128 = 0; ++ ccp_wantoptions[0].mppe_stateless = ccp_allowoptions[0].mppe_stateless = 0; ++ return 1; ++} ++#endif /* MPPE */ ++ + /* + * ccp_init - initialize CCP. + */ +@@ -378,6 +452,30 @@ + ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS; + + ccp_allowoptions[0].predictor_1 = 1; ++ ++ ccp_wantoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ ++ ccp_wantoptions[0].lzs_mode = LZS_MODE_SEQ; ++ ccp_wantoptions[0].lzs_hists = 1; ++ ccp_allowoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */ ++ ccp_allowoptions[0].lzs_mode = LZS_MODE_SEQ; ++ ccp_allowoptions[0].lzs_hists = 1; ++ ++#ifdef MPPE ++ /* by default allow and request MPPC... */ ++ ccp_wantoptions[0].mppc = ccp_allowoptions[0].mppc = 1; ++ ++ /* ... and allow but don't request MPPE */ ++ ccp_allowoptions[0].mppe = 1; ++ ccp_allowoptions[0].mppe_40 = 1; ++ ccp_allowoptions[0].mppe_56 = 1; ++ ccp_allowoptions[0].mppe_128 = 1; ++ ccp_allowoptions[0].mppe_stateless = 1; ++ ccp_wantoptions[0].mppe = 0; ++ ccp_wantoptions[0].mppe_40 = 0; ++ ccp_wantoptions[0].mppe_56 = 0; ++ ccp_wantoptions[0].mppe_128 = 0; ++ ccp_wantoptions[0].mppe_stateless = 0; ++#endif /* MPPE */ + } + + /* +@@ -455,11 +553,11 @@ + if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) { + notice("Compression disabled by peer."); + #ifdef MPPE +- if (ccp_gotoptions[unit].mppe) { ++ if (ccp_wantoptions[unit].mppe) { + error("MPPE disabled, closing LCP"); + lcp_close(unit, "MPPE disabled by peer"); + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -487,6 +585,15 @@ + break; + /* send a reset-ack, which the transmitter will see and + reset its compression state. */ ++ ++ /* In case of MPPE/MPPC or LZS we shouldn't send CCP_RESETACK, ++ but we do it in order to reset compressor; CCP_RESETACK is ++ then silently discarded. See functions ppp_send_frame and ++ ppp_ccp_peek in ppp_generic.c (Linux only !!!). All the ++ confusion is caused by the fact that CCP code is splited ++ into two parts - one part is handled by pppd, the other one ++ is handled by kernel. */ ++ + fsm_sdata(f, CCP_RESETACK, id, NULL, 0); + break; + +@@ -515,12 +622,11 @@ + fsm_lowerdown(&ccp_fsm[unit]); + + #ifdef MPPE +- if (ccp_gotoptions[unit].mppe) { ++ if (ccp_wantoptions[unit].mppe) { + error("MPPE required but peer negotiation failed"); + lcp_close(unit, "MPPE required but peer negotiation failed"); + } +-#endif +- ++#endif /* MPPE */ + } + + /* +@@ -537,7 +643,7 @@ + all_rejected[f->unit] = 0; + + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc) { + ccp_options *ao = &ccp_allowoptions[f->unit]; + int auth_mschap_bits = auth_done[f->unit]; + int numbits; +@@ -551,80 +657,109 @@ + * NB: If MPPE is required, all other compression opts are invalid. + * So, we return right away if we can't do it. + */ ++ if (ccp_wantoptions[f->unit].mppe) { ++ /* Leave only the mschap auth bits set */ ++ auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | ++ CHAP_MS2_WITHPEER | CHAP_MS2_PEER); ++ /* Count the mschap auths */ ++ auth_mschap_bits >>= CHAP_MS_SHIFT; ++ numbits = 0; ++ do { ++ numbits += auth_mschap_bits & 1; ++ auth_mschap_bits >>= 1; ++ } while (auth_mschap_bits); ++ if (numbits > 1) { ++ error("MPPE required, but auth done in both directions."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; ++ } ++ if (!numbits) { ++ error("MPPE required, but MS-CHAP[v2] auth not performed."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; ++ } + +- /* Leave only the mschap auth bits set */ +- auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | +- CHAP_MS2_WITHPEER | CHAP_MS2_PEER); +- /* Count the mschap auths */ +- auth_mschap_bits >>= CHAP_MS_SHIFT; +- numbits = 0; +- do { +- numbits += auth_mschap_bits & 1; +- auth_mschap_bits >>= 1; +- } while (auth_mschap_bits); +- if (numbits > 1) { +- error("MPPE required, but auth done in both directions."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; +- } +- if (!numbits) { +- error("MPPE required, but MS-CHAP[v2] auth not performed."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; +- } +- +- /* A plugin (eg radius) may not have obtained key material. */ +- if (!mppe_keys_set) { +- error("MPPE required, but keys are not available. " +- "Possible plugin problem?"); +- lcp_close(f->unit, "MPPE required but not available"); +- return; +- } +- +- /* LM auth not supported for MPPE */ +- if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) { +- /* This might be noise */ +- if (go->mppe & MPPE_OPT_40) { +- notice("Disabling 40-bit MPPE; MS-CHAP LM not supported"); +- go->mppe &= ~MPPE_OPT_40; +- ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40; ++ /* A plugin (eg radius) may not have obtained key material. */ ++ if (!mppe_keys_set) { ++ error("MPPE required, but keys are not available. " ++ "Possible plugin problem?"); ++ lcp_close(f->unit, "MPPE required but not available"); ++ return; + } + } + +- /* Last check: can we actually negotiate something? */ +- if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) { +- /* Could be misconfig, could be 40-bit disabled above. */ +- error("MPPE required, but both 40-bit and 128-bit disabled."); +- lcp_close(f->unit, "MPPE required but not available"); +- return; ++ /* ++ * Check whether the kernel knows about the various ++ * compression methods we might request. Key material ++ * unimportant here. ++ */ ++ if (go->mppc) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = 0; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_MPPC; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 0) <= 0) ++ go->mppc = 0; ++ } ++ if (go->mppe_40) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_40BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_40 = 0; ++ } ++ if (go->mppe_56) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_56BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_56 = 0; ++ } ++ if (go->mppe_128) { ++ opt_buf[0] = CI_MPPE; ++ opt_buf[1] = CILEN_MPPE; ++ opt_buf[2] = MPPE_STATELESS; ++ opt_buf[3] = 0; ++ opt_buf[4] = 0; ++ opt_buf[5] = MPPE_128BIT; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) ++ go->mppe_128 = 0; ++ } ++ if (!go->mppe_40 && !go->mppe_56 && !go->mppe_128) { ++ if (ccp_wantoptions[f->unit].mppe) { ++ error("MPPE required, but kernel has no support."); ++ lcp_close(f->unit, "MPPE required but not available"); ++ } ++ go->mppe = go->mppe_stateless = 0; ++ } else { ++ /* MPPE is not compatible with other compression types */ ++ if (ccp_wantoptions[f->unit].mppe) { ++ ao->bsd_compress = go->bsd_compress = 0; ++ ao->predictor_1 = go->predictor_1 = 0; ++ ao->predictor_2 = go->predictor_2 = 0; ++ ao->deflate = go->deflate = 0; ++ ao->lzs = go->lzs = 0; ++ } + } +- +- /* sync options */ +- ao->mppe = go->mppe; +- /* MPPE is not compatible with other compression types */ +- ao->bsd_compress = go->bsd_compress = 0; +- ao->predictor_1 = go->predictor_1 = 0; +- ao->predictor_2 = go->predictor_2 = 0; +- ao->deflate = go->deflate = 0; + } + #endif /* MPPE */ +- +- /* +- * Check whether the kernel knows about the various +- * compression methods we might request. +- */ +-#ifdef MPPE +- if (go->mppe) { +- opt_buf[0] = CI_MPPE; +- opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); +- /* Key material unimportant here. */ +- if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) { +- error("MPPE required, but kernel has no support."); +- lcp_close(f->unit, "MPPE required but not available"); +- } ++ if (go->lzs) { ++ opt_buf[0] = CI_LZS; ++ opt_buf[1] = CILEN_LZS; ++ opt_buf[2] = go->lzs_hists >> 8; ++ opt_buf[3] = go->lzs_hists & 0xff; ++ opt_buf[4] = LZS_MODE_SEQ; ++ if (ccp_test(f->unit, opt_buf, CILEN_LZS, 0) <= 0) ++ go->lzs = 0; + } +-#endif + if (go->bsd_compress) { + opt_buf[0] = CI_BSD_COMPRESS; + opt_buf[1] = CILEN_BSD_COMPRESS; +@@ -679,7 +814,8 @@ + + (go->deflate? CILEN_DEFLATE: 0) + + (go->predictor_1? CILEN_PREDICTOR_1: 0) + + (go->predictor_2? CILEN_PREDICTOR_2: 0) +- + (go->mppe? CILEN_MPPE: 0); ++ + (go->lzs? CILEN_LZS: 0) ++ + ((go->mppe || go->mppc)? CILEN_MPPE: 0); + } + + /* +@@ -693,6 +829,8 @@ + { + int res; + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + u_char *p0 = p; + + /* +@@ -701,22 +839,43 @@ + * in case it gets Acked. + */ + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { + u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; + +- p[0] = opt_buf[0] = CI_MPPE; +- p[1] = opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &p[2]); +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); ++ p[0] = CI_MPPE; ++ p[1] = CILEN_MPPE; ++ p[2] = (go->mppe_stateless ? MPPE_STATELESS : 0); ++ p[3] = 0; ++ p[4] = 0; ++ p[5] = (go->mppe_40 ? MPPE_40BIT : 0) | (go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppe_128 ? MPPE_128BIT : 0) | (go->mppc ? MPPE_MPPC : 0); ++ ++ BCOPY(p, opt_buf, CILEN_MPPE); + BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN); + res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0); +- if (res > 0) ++ if (res > 0) { + p += CILEN_MPPE; +- else ++ } else { + /* This shouldn't happen, we've already tested it! */ +- lcp_close(f->unit, "MPPE required but not available in kernel"); ++ go->mppe = go->mppe_40 = go->mppe_56 = go->mppe_128 = ++ go->mppe_stateless = go->mppc = 0; ++ if (ccp_wantoptions[f->unit].mppe) ++ lcp_close(f->unit, "MPPE required but not available in kernel"); ++ } ++ } ++#endif /* MPPE */ ++ if (go->lzs) { ++ p[0] = CI_LZS; ++ p[1] = CILEN_LZS; ++ p[2] = go->lzs_hists >> 8; ++ p[3] = go->lzs_hists & 0xff; ++ p[4] = LZS_MODE_SEQ; ++ res = ccp_test(f->unit, p, CILEN_LZS, 0); ++ if (res > 0) { ++ p += CILEN_LZS; ++ } else ++ go->lzs = 0; + } +-#endif + if (go->deflate) { + p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT; + p[1] = CILEN_DEFLATE; +@@ -802,7 +961,7 @@ + + /* + * ccp_ackci - process a received configure-ack, and return +- * 1 iff the packet was OK. ++ * 1 if the packet was OK. + */ + static int + ccp_ackci(f, p, len) +@@ -811,24 +970,44 @@ + int len; + { + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + u_char *p0 = p; + + #ifdef MPPE +- if (go->mppe) { +- u_char opt_buf[CILEN_MPPE]; +- +- opt_buf[0] = CI_MPPE; +- opt_buf[1] = CILEN_MPPE; +- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); +- if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE)) ++ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) { ++ if (len < CILEN_MPPE ++ || p[1] != CILEN_MPPE || p[0] != CI_MPPE ++ || p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) ++ || p[3] != 0 ++ || p[4] != 0 ++ || (p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)) ++ && p[5] != ((go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)) ++ && p[5] != ((go->mppe_128 ? MPPE_128BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0)))) + return 0; ++ if (go->mppe_40 || go->mppe_56 || go->mppe_128) ++ go->mppe = 1; + p += CILEN_MPPE; + len -= CILEN_MPPE; ++ /* Cope with first/fast ack */ ++ if (p == p0 && len == 0) ++ return 1; ++ } ++#endif /* MPPE */ ++ if (go->lzs) { ++ if (len < CILEN_LZS || p[0] != CI_LZS || p[1] != CILEN_LZS ++ || p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) ++ || p[4] != LZS_MODE_SEQ) ++ return 0; ++ p += CILEN_LZS; ++ len -= CILEN_LZS; + /* XXX Cope with first/fast ack */ +- if (len == 0) ++ if (p == p0 && len == 0) + return 1; + } +-#endif + if (go->deflate) { + if (len < CILEN_DEFLATE + || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) +@@ -891,7 +1070,7 @@ + + /* + * ccp_nakci - process received configure-nak. +- * Returns 1 iff the nak was OK. ++ * Returns 1 if the nak was OK. + */ + static int + ccp_nakci(f, p, len, treat_as_reject) +@@ -900,6 +1079,8 @@ + int len; + { + ccp_options *go = &ccp_gotoptions[f->unit]; ++ ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + ccp_options no; /* options we've seen already */ + ccp_options try; /* options to ask for next time */ + +@@ -907,28 +1088,100 @@ + try = *go; + + #ifdef MPPE +- if (go->mppe && len >= CILEN_MPPE +- && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { +- no.mppe = 1; +- /* +- * Peer wants us to use a different strength or other setting. +- * Fail if we aren't willing to use his suggestion. +- */ +- MPPE_CI_TO_OPTS(&p[2], try.mppe); +- if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) { +- error("Refusing MPPE stateful mode offered by peer"); +- try.mppe = 0; +- } else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) { +- /* Peer must have set options we didn't request (suggest) */ +- try.mppe = 0; +- } ++ if ((go->mppe || go->mppc || (!wo->mppe && ao->mppe)) && ++ len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { + +- if (!try.mppe) { +- error("MPPE required but peer negotiation failed"); +- lcp_close(f->unit, "MPPE required but peer negotiation failed"); ++ if (go->mppc) { ++ no.mppc = 1; ++ if (!(p[5] & MPPE_MPPC)) ++ try.mppc = 0; ++ } ++ ++ if (go->mppe) ++ no.mppe = 1; ++ if (go->mppe_40) ++ no.mppe_40 = 1; ++ if (go->mppe_56) ++ no.mppe_56 = 1; ++ if (go->mppe_128) ++ no.mppe_128 = 1; ++ if (go->mppe_stateless) ++ no.mppe_stateless = 1; ++ ++ if (ao->mppe_40) { ++ if ((p[5] & MPPE_40BIT)) ++ try.mppe_40 = 1; ++ else ++ try.mppe_40 = (p[5] == 0) ? 1 : 0; ++ } ++ if (ao->mppe_56) { ++ if ((p[5] & MPPE_56BIT)) ++ try.mppe_56 = 1; ++ else ++ try.mppe_56 = (p[5] == 0) ? 1 : 0; ++ } ++ if (ao->mppe_128) { ++ if ((p[5] & MPPE_128BIT)) ++ try.mppe_128 = 1; ++ else ++ try.mppe_128 = (p[5] == 0) ? 1 : 0; ++ } ++ ++ if (ao->mppe_stateless) { ++ if ((p[2] & MPPE_STATELESS) || wo->mppe_stateless) ++ try.mppe_stateless = 1; ++ else ++ try.mppe_stateless = 0; ++ } ++ ++ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) { ++ try.mppe = try.mppe_stateless = 0; ++ if (wo->mppe) { ++ /* we require encryption, but peer doesn't support it ++ so we close connection */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " ++ "key length"); ++ } ++ } ++ if (wo->mppe && (wo->mppe_40 != try.mppe_40) && ++ (wo->mppe_56 != try.mppe_56) && (wo->mppe_128 != try.mppe_128)) { ++ /* cannot negotiate key length */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "Cannot negotiate MPPE key length"); + } ++ if (try.mppe_40 && try.mppe_56 && try.mppe_128) ++ try.mppe_40 = try.mppe_56 = 0; ++ else ++ if (try.mppe_56 && try.mppe_128) ++ try.mppe_56 = 0; ++ else ++ if (try.mppe_40 && try.mppe_128) ++ try.mppe_40 = 0; ++ else ++ if (try.mppe_40 && try.mppe_56) ++ try.mppe_40 = 0; ++ ++ p += CILEN_MPPE; ++ len -= CILEN_MPPE; + } + #endif /* MPPE */ ++ ++ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { ++ no.lzs = 1; ++ if (((p[2]<<8)|p[3]) > 1 || (p[4] != LZS_MODE_SEQ && ++ p[4] != LZS_MODE_EXT)) ++ try.lzs = 0; ++ else { ++ try.lzs_mode = p[4]; ++ try.lzs_hists = (p[2] << 8) | p[3]; ++ } ++ p += CILEN_LZS; ++ len -= CILEN_LZS; ++ } ++ + if (go->deflate && len >= CILEN_DEFLATE + && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) + && p[1] == CILEN_DEFLATE) { +@@ -1001,14 +1254,50 @@ + return -1; + + #ifdef MPPE +- if (go->mppe && len >= CILEN_MPPE ++ if ((go->mppe || go->mppc) && len >= CILEN_MPPE + && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { +- error("MPPE required but peer refused"); +- lcp_close(f->unit, "MPPE required but peer refused"); ++ ccp_options *wo = &ccp_wantoptions[f->unit]; ++ if (p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) || ++ p[3] != 0 || ++ p[4] != 0 || ++ p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) | ++ (go->mppe_56 ? MPPE_56BIT : 0) | ++ (go->mppe_128 ? MPPE_128BIT : 0) | ++ (go->mppc ? MPPE_MPPC : 0))) ++ return 0; ++ if (go->mppc) ++ try.mppc = 0; ++ if (go->mppe) { ++ try.mppe = 0; ++ if (go->mppe_40) ++ try.mppe_40 = 0; ++ if (go->mppe_56) ++ try.mppe_56 = 0; ++ if (go->mppe_128) ++ try.mppe_128 = 0; ++ if (go->mppe_stateless) ++ try.mppe_stateless = 0; ++ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) ++ try.mppe = try.mppe_stateless = 0; ++ if (wo->mppe) { /* we want MPPE but cannot negotiate key length */ ++ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 = ++ wo->mppe_56 = wo->mppe_128 = 0; ++ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE " ++ "key length"); ++ } ++ } + p += CILEN_MPPE; + len -= CILEN_MPPE; + } +-#endif ++#endif /* MPPE */ ++ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) { ++ if (p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff) ++ || p[4] != go->lzs_mode) ++ return 0; ++ try.lzs = 0; ++ p += CILEN_LZS; ++ len -= CILEN_LZS; ++ } + if (go->deflate_correct && len >= CILEN_DEFLATE + && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) { + if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size) +@@ -1072,14 +1361,15 @@ + int dont_nak; + { + int ret, newret, res; +- u_char *p0, *retp; ++ u_char *p0, *retp, p2, p5; + int len, clen, type, nb; + ccp_options *ho = &ccp_hisoptions[f->unit]; + ccp_options *ao = &ccp_allowoptions[f->unit]; ++ ccp_options *wo = &ccp_wantoptions[f->unit]; + #ifdef MPPE +- bool rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */ +- /* CI_MPPE, or due to other options? */ +-#endif ++ u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; ++/* int mtu; */ ++#endif /* MPPE */ + + ret = CONFACK; + retp = p0 = p; +@@ -1102,103 +1392,305 @@ + switch (type) { + #ifdef MPPE + case CI_MPPE: +- if (!ao->mppe || clen != CILEN_MPPE) { ++ if ((!ao->mppc && !ao->mppe) || clen != CILEN_MPPE) { + newret = CONFREJ; + break; + } +- MPPE_CI_TO_OPTS(&p[2], ho->mppe); + +- /* Nak if anything unsupported or unknown are set. */ +- if (ho->mppe & MPPE_OPT_UNSUPPORTED) { +- newret = CONFNAK; +- ho->mppe &= ~MPPE_OPT_UNSUPPORTED; +- } +- if (ho->mppe & MPPE_OPT_UNKNOWN) { ++ p2 = p[2]; ++ p5 = p[5]; ++ /* not sure what they want, tell 'em what we got */ ++ if (((p[2] & ~MPPE_STATELESS) != 0 || p[3] != 0 || p[4] != 0 || ++ (p[5] & ~(MPPE_40BIT | MPPE_56BIT | MPPE_128BIT | ++ MPPE_MPPC)) != 0 || p[5] == 0) || ++ (p[2] == 0 && p[3] == 0 && p[4] == 0 && p[5] == 0)) { + newret = CONFNAK; +- ho->mppe &= ~MPPE_OPT_UNKNOWN; ++ p[2] = (wo->mppe_stateless ? MPPE_STATELESS : 0); ++ p[3] = 0; ++ p[4] = 0; ++ p[5] = (wo->mppe_40 ? MPPE_40BIT : 0) | ++ (wo->mppe_56 ? MPPE_56BIT : 0) | ++ (wo->mppe_128 ? MPPE_128BIT : 0) | ++ (wo->mppc ? MPPE_MPPC : 0); ++ break; + } + +- /* Check state opt */ +- if (ho->mppe & MPPE_OPT_STATEFUL) { +- /* +- * We can Nak and request stateless, but it's a +- * lot easier to just assume the peer will request +- * it if he can do it; stateful mode is bad over +- * the Internet -- which is where we expect MPPE. +- */ +- if (refuse_mppe_stateful) { +- error("Refusing MPPE stateful mode offered by peer"); ++ if ((p[5] & MPPE_MPPC)) { ++ if (ao->mppc) { ++ ho->mppc = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ opt_buf[2] = opt_buf[3] = opt_buf[4] = 0; ++ opt_buf[5] = MPPE_MPPC; ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 1) <= 0) { ++ ho->mppc = 0; ++ p[5] &= ~MPPE_MPPC; ++ newret = CONFNAK; ++ } ++ } else { + newret = CONFREJ; +- break; ++ if (wo->mppe || ao->mppe) { ++ p[5] &= ~MPPE_MPPC; ++ newret = CONFNAK; ++ } ++ } ++ } ++ ++ if (ao->mppe) ++ ho->mppe = 1; ++ ++ if ((p[2] & MPPE_STATELESS)) { ++ if (ao->mppe_stateless) { ++ if (wo->mppe_stateless) ++ ho->mppe_stateless = 1; ++ else { ++ newret = CONFNAK; ++ if (!dont_nak) ++ p[2] &= ~MPPE_STATELESS; ++ } ++ } else { ++ newret = CONFNAK; ++ if (!dont_nak) ++ p[2] &= ~MPPE_STATELESS; ++ } ++ } else { ++ if (wo->mppe_stateless && !dont_nak) { ++ wo->mppe_stateless = 0; ++ newret = CONFNAK; ++ p[2] |= MPPE_STATELESS; + } + } + +- /* Find out which of {S,L} are set. */ +- if ((ho->mppe & MPPE_OPT_128) +- && (ho->mppe & MPPE_OPT_40)) { +- /* Both are set, negotiate the strongest. */ ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT|MPPE_128BIT)) { + newret = CONFNAK; +- if (ao->mppe & MPPE_OPT_128) +- ho->mppe &= ~MPPE_OPT_40; +- else if (ao->mppe & MPPE_OPT_40) +- ho->mppe &= ~MPPE_OPT_128; +- else { +- newret = CONFREJ; +- break; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~(MPPE_40BIT|MPPE_56BIT); ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= (MPPE_40BIT|MPPE_56BIT); ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56_40; ++ } ++ goto check_mppe; + } +- } else if (ho->mppe & MPPE_OPT_128) { +- if (!(ao->mppe & MPPE_OPT_128)) { +- newret = CONFREJ; +- break; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56_40; ++ } ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_56BIT|MPPE_128BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~MPPE_56BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= MPPE_56BIT; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56; ++ } ++ goto check_mppe; + } +- } else if (ho->mppe & MPPE_OPT_40) { +- if (!(ao->mppe & MPPE_OPT_40)) { +- newret = CONFREJ; +- break; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_56; ++ } ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_128BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ p[5] &= ~MPPE_40BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] |= MPPE_40BIT; ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_40; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_128BIT; ++ goto check_mppe_40; ++ } ++ if ((p[5] & ~MPPE_MPPC) == MPPE_128BIT) { ++ if (ao->mppe_128) { ++ ho->mppe_128 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_128 = 0; ++ p[5] &= ~MPPE_128BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_128BIT; ++ newret = CONFNAK; ++ goto check_mppe; ++ } ++ check_mppe_56_40: ++ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT)) { ++ newret = CONFNAK; ++ if (ao->mppe_56) { ++ ho->mppe_56 = 1; ++ p[5] &= ~MPPE_40BIT; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_56 = 0; ++ p[5] |= MPPE_40BIT; ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ goto check_mppe_40; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_56BIT; ++ goto check_mppe_40; ++ } ++ check_mppe_56: ++ if ((p[5] & ~MPPE_MPPC) == MPPE_56BIT) { ++ if (ao->mppe_56) { ++ ho->mppe_56 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_56 = 0; ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_56BIT; ++ newret = CONFNAK; ++ goto check_mppe; ++ } ++ check_mppe_40: ++ if ((p[5] & ~MPPE_MPPC) == MPPE_40BIT) { ++ if (ao->mppe_40) { ++ ho->mppe_40 = 1; ++ BCOPY(p, opt_buf, CILEN_MPPE); ++ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], ++ MPPE_MAX_KEY_LEN); ++ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + ++ MPPE_MAX_KEY_LEN, 1) <= 0) { ++ ho->mppe_40 = 0; ++ p[5] &= ~MPPE_40BIT; ++ newret = CONFNAK; ++ } ++ goto check_mppe; ++ } ++ p[5] &= ~MPPE_40BIT; ++ } ++ ++ check_mppe: ++ if (!ho->mppe_40 && !ho->mppe_56 && !ho->mppe_128) { ++ if (wo->mppe_40 || wo->mppe_56 || wo->mppe_128) { ++ newret = CONFNAK; ++ p[2] |= (wo->mppe_stateless ? MPPE_STATELESS : 0); ++ p[5] |= (wo->mppe_40 ? MPPE_40BIT : 0) | ++ (wo->mppe_56 ? MPPE_56BIT : 0) | ++ (wo->mppe_128 ? MPPE_128BIT : 0) | ++ (wo->mppc ? MPPE_MPPC : 0); ++ } else { ++ ho->mppe = ho->mppe_stateless = 0; + } + } else { +- /* Neither are set. */ ++ /* MPPE is not compatible with other compression types */ ++ if (wo->mppe) { ++ ao->bsd_compress = 0; ++ ao->predictor_1 = 0; ++ ao->predictor_2 = 0; ++ ao->deflate = 0; ++ ao->lzs = 0; ++ } ++ } ++ if ((!ho->mppc || !ao->mppc) && !ho->mppe) { ++ p[2] = p2; ++ p[5] = p5; + newret = CONFREJ; + break; + } + +- /* rebuild the opts */ +- MPPE_OPTS_TO_CI(ho->mppe, &p[2]); +- if (newret == CONFACK) { +- u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN]; +- int mtu; +- +- BCOPY(p, opt_buf, CILEN_MPPE); +- BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE], +- MPPE_MAX_KEY_LEN); +- if (ccp_test(f->unit, opt_buf, +- CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) { +- /* This shouldn't happen, we've already tested it! */ +- error("MPPE required, but kernel has no support."); +- lcp_close(f->unit, "MPPE required but not available"); +- newret = CONFREJ; +- break; +- } +- /* +- * We need to decrease the interface MTU by MPPE_PAD +- * because MPPE frames **grow**. The kernel [must] +- * allocate MPPE_PAD extra bytes in xmit buffers. +- */ +- mtu = netif_get_mtu(f->unit); +- if (mtu) +- netif_set_mtu(f->unit, mtu - MPPE_PAD); +- else +- newret = CONFREJ; +- } ++ /* ++ * I have commented the code below because according to RFC1547 ++ * MTU is only information for higher level protocols about ++ * "the maximum allowable length for a packet (q.v.) transmitted ++ * over a point-to-point link without incurring network layer ++ * fragmentation." Of course a PPP implementation should be able ++ * to handle overhead added by MPPE - in our case apropriate code ++ * is located in drivers/net/ppp_generic.c in the kernel sources. ++ * ++ * According to RFC1661: ++ * - when negotiated MRU is less than 1500 octets, a PPP ++ * implementation must still be able to receive at least 1500 ++ * octets, ++ * - when PFC is negotiated, a PPP implementation is still ++ * required to receive frames with uncompressed protocol field. ++ * ++ * So why not to handle MPPE overhead without changing MTU value? ++ * I am sure that RFC3078, unfortunately silently, assumes that. ++ */ + + /* +- * We have accepted MPPE or are willing to negotiate +- * MPPE parameters. A CONFREJ is due to subsequent +- * (non-MPPE) processing. ++ * We need to decrease the interface MTU by MPPE_PAD ++ * because MPPE frames **grow**. The kernel [must] ++ * allocate MPPE_PAD extra bytes in xmit buffers. + */ +- rej_for_ci_mppe = 0; ++/* ++ mtu = netif_get_mtu(f->unit); ++ if (mtu) { ++ netif_set_mtu(f->unit, mtu - MPPE_PAD); ++ } else { ++ newret = CONFREJ; ++ if (ccp_wantoptions[f->unit].mppe) { ++ error("Cannot adjust MTU needed by MPPE."); ++ lcp_close(f->unit, "Cannot adjust MTU needed by MPPE."); ++ } ++ } ++*/ + break; + #endif /* MPPE */ ++ ++ case CI_LZS: ++ if (!ao->lzs || clen != CILEN_LZS) { ++ newret = CONFREJ; ++ break; ++ } ++ ++ ho->lzs = 1; ++ ho->lzs_hists = (p[2] << 8) | p[3]; ++ ho->lzs_mode = p[4]; ++ if ((ho->lzs_hists != ao->lzs_hists) || ++ (ho->lzs_mode != ao->lzs_mode)) { ++ newret = CONFNAK; ++ if (!dont_nak) { ++ p[2] = ao->lzs_hists >> 8; ++ p[3] = ao->lzs_hists & 0xff; ++ p[4] = ao->lzs_mode; ++ } else ++ break; ++ } ++ ++ if (p == p0 && ccp_test(f->unit, p, CILEN_LZS, 1) <= 0) { ++ newret = CONFREJ; ++ } ++ break; ++ + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (!ao->deflate || clen != CILEN_DEFLATE +@@ -1340,12 +1832,6 @@ + else + *lenp = retp - p0; + } +-#ifdef MPPE +- if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) { +- error("MPPE required but peer negotiation failed"); +- lcp_close(f->unit, "MPPE required but peer negotiation failed"); +- } +-#endif + return ret; + } + +@@ -1367,24 +1853,35 @@ + char *p = result; + char *q = result + sizeof(result); /* 1 past result */ + +- slprintf(p, q - p, "MPPE "); +- p += 5; +- if (opt->mppe & MPPE_OPT_128) { +- slprintf(p, q - p, "128-bit "); +- p += 8; +- } +- if (opt->mppe & MPPE_OPT_40) { +- slprintf(p, q - p, "40-bit "); +- p += 7; +- } +- if (opt->mppe & MPPE_OPT_STATEFUL) +- slprintf(p, q - p, "stateful"); +- else +- slprintf(p, q - p, "stateless"); +- ++ if (opt->mppe) { ++ if (opt->mppc) { ++ slprintf(p, q - p, "MPPC/MPPE "); ++ p += 10; ++ } else { ++ slprintf(p, q - p, "MPPE "); ++ p += 5; ++ } ++ if (opt->mppe_128) { ++ slprintf(p, q - p, "128-bit "); ++ p += 8; ++ } else if (opt->mppe_56) { ++ slprintf(p, q - p, "56-bit "); ++ p += 7; ++ } else if (opt->mppe_40) { ++ slprintf(p, q - p, "40-bit "); ++ p += 7; ++ } ++ if (opt->mppe_stateless) ++ slprintf(p, q - p, "stateless"); ++ else ++ slprintf(p, q - p, "stateful"); ++ } else if (opt->mppc) ++ slprintf(p, q - p, "MPPC"); + break; + } +-#endif ++#endif /* MPPE */ ++ case CI_LZS: ++ return "Stac LZS"; + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (opt2 != NULL && opt2->deflate_size != opt->deflate_size) +@@ -1440,12 +1937,12 @@ + } else if (ANY_COMPRESS(*ho)) + notice("%s transmit compression enabled", method_name(ho, NULL)); + #ifdef MPPE +- if (go->mppe) { ++ if (go->mppe || go->mppc) { + BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN); + BZERO(mppe_send_key, MPPE_MAX_KEY_LEN); + continue_networks(f->unit); /* Bring up IP et al */ + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -1468,7 +1965,7 @@ + lcp_close(f->unit, "MPPE disabled"); + } + } +-#endif ++#endif /* MPPE */ + } + + /* +@@ -1528,24 +2025,28 @@ + #ifdef MPPE + case CI_MPPE: + if (optlen >= CILEN_MPPE) { +- u_char mppe_opts; +- +- MPPE_CI_TO_OPTS(&p[2], mppe_opts); +- printer(arg, "mppe %s %s %s %s %s %s%s", +- (p[2] & MPPE_H_BIT)? "+H": "-H", +- (p[5] & MPPE_M_BIT)? "+M": "-M", +- (p[5] & MPPE_S_BIT)? "+S": "-S", +- (p[5] & MPPE_L_BIT)? "+L": "-L", ++ printer(arg, "mppe %s %s %s %s %s %s", ++ (p[2] & MPPE_STATELESS)? "+H": "-H", ++ (p[5] & MPPE_56BIT)? "+M": "-M", ++ (p[5] & MPPE_128BIT)? "+S": "-S", ++ (p[5] & MPPE_40BIT)? "+L": "-L", + (p[5] & MPPE_D_BIT)? "+D": "-D", +- (p[5] & MPPE_C_BIT)? "+C": "-C", +- (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": ""); +- if (mppe_opts & MPPE_OPT_UNKNOWN) ++ (p[5] & MPPE_MPPC)? "+C": "-C"); ++ if ((p[5] & ~(MPPE_56BIT | MPPE_128BIT | MPPE_40BIT | ++ MPPE_D_BIT | MPPE_MPPC)) || ++ (p[2] & ~MPPE_STATELESS)) + printer(arg, " (%.2x %.2x %.2x %.2x)", + p[2], p[3], p[4], p[5]); + p += CILEN_MPPE; + } + break; +-#endif ++#endif /* MPPE */ ++ case CI_LZS: ++ if (optlen >= CILEN_LZS) { ++ printer(arg, "lzs %.2x %.2x %.2x", p[2], p[3], p[4]); ++ p += CILEN_LZS; ++ } ++ break; + case CI_DEFLATE: + case CI_DEFLATE_DRAFT: + if (optlen >= CILEN_DEFLATE) { +@@ -1631,6 +2132,7 @@ + error("Lost compression sync: disabling compression"); + ccp_close(unit, "Lost compression sync"); + #ifdef MPPE ++ /* My module dosn't need this. J.D., 2003-07-06 */ + /* + * If we were doing MPPE, we must also take the link down. + */ +@@ -1638,9 +2140,18 @@ + error("Too many MPPE errors, closing LCP"); + lcp_close(unit, "Too many MPPE errors"); + } +-#endif ++#endif /* MPPE */ + } else { + /* ++ * When LZS or MPPE/MPPC is negotiated we just send CCP_RESETREQ ++ * and don't wait for CCP_RESETACK ++ */ ++ if ((ccp_gotoptions[f->unit].method == CI_LZS) || ++ (ccp_gotoptions[f->unit].method == CI_MPPE)) { ++ fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0); ++ return; ++ } ++ /* + * Send a reset-request to reset the peer's compressor. + * We don't do that if we are still waiting for an + * acknowledgement to a previous reset-request. +@@ -1671,4 +2182,3 @@ + } else + ccp_localstate[f->unit] &= ~RACK_PENDING; + } +- +diff -ruN ppp-2.4.3-orig/pppd/ccp.h ppp-2.4.3-3/pppd/ccp.h +--- ppp-2.4.3-orig/pppd/ccp.h 2004-11-04 11:02:26.000000000 +0100 ++++ ppp-2.4.3-3/pppd/ccp.h 2004-12-05 17:51:27.000000000 +0100 +@@ -37,9 +37,17 @@ + bool predictor_2; /* do Predictor-2? */ + bool deflate_correct; /* use correct code for deflate? */ + bool deflate_draft; /* use draft RFC code for deflate? */ ++ bool lzs; /* do Stac LZS? */ ++ bool mppc; /* do MPPC? */ + bool mppe; /* do MPPE? */ ++ bool mppe_40; /* allow 40 bit encryption? */ ++ bool mppe_56; /* allow 56 bit encryption? */ ++ bool mppe_128; /* allow 128 bit encryption? */ ++ bool mppe_stateless; /* allow stateless encryption */ + u_short bsd_bits; /* # bits/code for BSD Compress */ + u_short deflate_size; /* lg(window size) for Deflate */ ++ u_short lzs_mode; /* LZS check mode */ ++ u_short lzs_hists; /* number of LZS histories */ + short method; /* code for chosen compression method */ + } ccp_options; + +diff -ruN ppp-2.4.3-orig/pppd/chap_ms.c ppp-2.4.3-3/pppd/chap_ms.c +--- ppp-2.4.3-orig/pppd/chap_ms.c 2004-11-12 10:57:43.000000000 +0100 ++++ ppp-2.4.3-3/pppd/chap_ms.c 2004-12-05 17:51:27.000000000 +0100 +@@ -895,13 +895,17 @@ + /* + * Disable undesirable encryption types. Note that we don't ENABLE + * any encryption types, to avoid overriding manual configuration. ++ * ++ * It seems that 56 bit keys are unsupported in MS-RADIUS (see RFC 2548) + */ + switch(types) { + case MPPE_ENC_TYPES_RC4_40: +- ccp_wantoptions[0].mppe &= ~MPPE_OPT_128; /* disable 128-bit */ ++ ccp_wantoptions[0].mppe_128 = 0; /* disable 128-bit */ ++ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ + break; + case MPPE_ENC_TYPES_RC4_128: +- ccp_wantoptions[0].mppe &= ~MPPE_OPT_40; /* disable 40-bit */ ++ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */ ++ ccp_wantoptions[0].mppe_40 = 0; /* disable 40-bit */ + break; + default: + break; +diff -ruN ppp-2.4.3-orig/pppd/plugins/Makefile.linux ppp-2.4.3-3/pppd/plugins/Makefile.linux +--- ppp-2.4.3-orig/pppd/plugins/Makefile.linux 2004-11-14 08:57:35.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/Makefile.linux 2004-12-05 17:03:59.000000000 +0100 +@@ -9,7 +9,7 @@ + MANDIR = $(DESTDIR)/share/man/man8 + LIBDIR = $(DESTDIR)/lib/pppd/$(VERSION) + +-SUBDIRS := rp-pppoe pppoatm radius ++SUBDIRS := rp-pppoe radius + # Uncomment the next line to include the radius authentication plugin + # SUBDIRS += radius + PLUGINS := minconn.so passprompt.so passwordfd.so winbind.so +diff -ruN ppp-2.4.3-orig/pppd/plugins/radius/Makefile.linux ppp-2.4.3-3/pppd/plugins/radius/Makefile.linux +--- ppp-2.4.3-orig/pppd/plugins/radius/Makefile.linux 2004-11-14 08:02:31.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/radius/Makefile.linux 2004-12-05 17:43:17.000000000 +0100 +@@ -12,7 +12,8 @@ + INSTALL = install + + PLUGIN=radius.so radattr.so radrealms.so +-CFLAGS=-I. -I../.. -I../../../include -O2 -fPIC -DRC_LOG_FACILITY=LOG_DAEMON ++COPTS = -O2 ++CFLAGS=-I. -I../.. -I../../../include $(COPTS) -fPIC -DRC_LOG_FACILITY=LOG_DAEMON + + # Uncomment the next line to include support for Microsoft's + # MS-CHAP authentication protocol. +@@ -36,9 +37,9 @@ + + install: all + $(INSTALL) -d -m 755 $(LIBDIR) +- $(INSTALL) -s -c -m 755 radius.so $(LIBDIR) +- $(INSTALL) -s -c -m 755 radattr.so $(LIBDIR) +- $(INSTALL) -s -c -m 755 radrealms.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radius.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radattr.so $(LIBDIR) ++ $(INSTALL) -c -m 755 radrealms.so $(LIBDIR) + $(INSTALL) -c -m 444 pppd-radius.8 $(MANDIR) + $(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR) + +diff -ruN ppp-2.4.3-orig/pppd/plugins/radius/config.c ppp-2.4.3-3/pppd/plugins/radius/config.c +--- ppp-2.4.3-orig/pppd/plugins/radius/config.c 2004-11-14 08:26:26.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/radius/config.c 2004-12-16 04:03:46.000000000 +0100 +@@ -369,31 +369,37 @@ + } + #endif + ++#if 0 + if (rc_conf_int("login_tries") <= 0) + { + error("%s: login_tries <= 0 is illegal", filename); + return (-1); + } ++#endif + if (rc_conf_str("seqfile") == NULL) + { + error("%s: seqfile not specified", filename); + return (-1); + } ++#if 0 + if (rc_conf_int("login_timeout") <= 0) + { + error("%s: login_timeout <= 0 is illegal", filename); + return (-1); + } ++#endif + if (rc_conf_str("mapfile") == NULL) + { + error("%s: mapfile not specified", filename); + return (-1); + } ++#if 0 + if (rc_conf_str("nologin") == NULL) + { + error("%s: nologin not specified", filename); + return (-1); + } ++#endif + + return 0; + } +diff -ruN ppp-2.4.3-orig/pppd/plugins/radius/options.h ppp-2.4.3-3/pppd/plugins/radius/options.h +--- ppp-2.4.3-orig/pppd/plugins/radius/options.h 2004-11-14 08:26:26.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/radius/options.h 2004-12-16 04:09:16.000000000 +0100 +@@ -31,24 +31,21 @@ + static SERVER acctserver = {0}; + static SERVER authserver = {0}; + +-int default_tries = 4; +-int default_timeout = 60; +- + static OPTION config_options[] = { + /* internally used options */ + {"config_file", OT_STR, ST_UNDEF, NULL}, + /* General options */ + {"auth_order", OT_AUO, ST_UNDEF, NULL}, +-{"login_tries", OT_INT, ST_UNDEF, &default_tries}, +-{"login_timeout", OT_INT, ST_UNDEF, &default_timeout}, +-{"nologin", OT_STR, ST_UNDEF, "/etc/nologin"}, +-{"issue", OT_STR, ST_UNDEF, "/etc/radiusclient/issue"}, ++{"login_tries", OT_INT, ST_UNDEF, NULL}, ++{"login_timeout", OT_INT, ST_UNDEF, NULL}, ++{"nologin", OT_STR, ST_UNDEF, NULL}, ++{"issue", OT_STR, ST_UNDEF, NULL}, + /* RADIUS specific options */ + {"authserver", OT_SRV, ST_UNDEF, &authserver}, + {"acctserver", OT_SRV, ST_UNDEF, &acctserver}, + {"servers", OT_STR, ST_UNDEF, NULL}, + {"dictionary", OT_STR, ST_UNDEF, NULL}, +-{"login_radius", OT_STR, ST_UNDEF, "/usr/sbin/login.radius"}, ++{"login_radius", OT_STR, ST_UNDEF, NULL}, + {"seqfile", OT_STR, ST_UNDEF, NULL}, + {"mapfile", OT_STR, ST_UNDEF, NULL}, + {"default_realm", OT_STR, ST_UNDEF, NULL}, +diff -ruN ppp-2.4.3-orig/pppd/plugins/rp-pppoe/Makefile.linux ppp-2.4.3-3/pppd/plugins/rp-pppoe/Makefile.linux +--- ppp-2.4.3-orig/pppd/plugins/rp-pppoe/Makefile.linux 2004-11-14 08:58:37.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/rp-pppoe/Makefile.linux 2004-12-05 17:43:23.000000000 +0100 +@@ -39,9 +39,9 @@ + + install: all + $(INSTALL) -d -m 755 $(LIBDIR) +- $(INSTALL) -s -c -m 4550 rp-pppoe.so $(LIBDIR) ++ $(INSTALL) -c -m 4550 rp-pppoe.so $(LIBDIR) + $(INSTALL) -d -m 755 $(BINDIR) +- $(INSTALL) -s -c -m 555 pppoe-discovery $(BINDIR) ++ $(INSTALL) -c -m 555 pppoe-discovery $(BINDIR) + + clean: + rm -f *.o *.so +diff -ruN ppp-2.4.3-orig/pppd/plugins/rp-pppoe/plugin.c ppp-2.4.3-3/pppd/plugins/rp-pppoe/plugin.c +--- ppp-2.4.3-orig/pppd/plugins/rp-pppoe/plugin.c 2004-11-04 11:07:37.000000000 +0100 ++++ ppp-2.4.3-3/pppd/plugins/rp-pppoe/plugin.c 2004-12-16 01:07:22.000000000 +0100 +@@ -286,7 +286,7 @@ + /* Strip off "nic-" */ + cmd += 4; + } else if (strlen(cmd) < 4 +- || (strncmp(cmd, "eth", 3) && strncmp(cmd, "nas", 3) ++ || (strncmp(cmd, "eth", 3) && strncmp(cmd, "nas", 3) && strncmp(cmd, "vlan", 4) + && strncmp(cmd, "tap", 3) && strncmp(cmd, "br", 2))) { + return 0; + } +diff -ruN ppp-2.4.3-orig/pppd/pppd.8 ppp-2.4.3-3/pppd/pppd.8 +--- ppp-2.4.3-orig/pppd/pppd.8 2004-11-13 13:22:49.000000000 +0100 ++++ ppp-2.4.3-3/pppd/pppd.8 2004-12-05 17:51:27.000000000 +0100 +@@ -622,9 +622,29 @@ + Enables the use of PPP multilink; this is an alias for the `multilink' + option. This option is currently only available under Linux. + .TP +-.B mppe\-stateful +-Allow MPPE to use stateful mode. Stateless mode is still attempted first. +-The default is to disallow stateful mode. ++.B mppc ++Enables MPPC (Microsoft Point to Point Compression). This is the default. ++.TP ++.B mppe \fIsubopt1[,subopt2[,subopt3[..]]] ++Modify MPPE (Microsoft Point to Point Encryption) parameters. In order ++for MPPE to successfully come up, you must have authenticated with either ++MS-CHAP or MS-CHAPv2. By default MPPE is optional, it means that pppd will ++not propose MPPE to the peer, but will negotiate MPPE if peer wants that. ++You can change this using \fIrequired\fR suboption. ++This option is presently only supported under Linux, and only if your ++kernel has been configured to include MPPE support. ++.IP ++MPPE suboptions: ++.br ++\fIrequired\fR - require MPPE; disconnect if peer doesn't support it, ++.br ++\fIstateless\fR - try to negotiate stateless mode; default is stateful, ++.br ++\fIno40\fR - disable 40 bit keys, ++.br ++\fIno56\fR - disable 56 bit keys, ++.br ++\fIno128\fR - disable 128 bit keys + .TP + .B mpshortseq + Enables the use of short (12-bit) sequence numbers in multilink +@@ -757,17 +777,11 @@ + Disables the use of PPP multilink. This option is currently only + available under Linux. + .TP +-.B nomppe +-Disables MPPE (Microsoft Point to Point Encryption). This is the default. +-.TP +-.B nomppe\-40 +-Disable 40-bit encryption with MPPE. ++.B nomppc ++Disables MPPC (Microsoft Point to Point Compression). + .TP +-.B nomppe\-128 +-Disable 128-bit encryption with MPPE. +-.TP +-.B nomppe\-stateful +-Disable MPPE stateful mode. This is the default. ++.B nomppe ++Disables MPPE (Microsoft Point to Point Encryption). + .TP + .B nompshortseq + Disables the use of short (12-bit) sequence numbers in the PPP +@@ -948,19 +962,6 @@ + Require the peer to authenticate itself using CHAP [Challenge + Handshake Authentication Protocol] authentication. + .TP +-.B require\-mppe +-Require the use of MPPE (Microsoft Point to Point Encryption). This +-option disables all other compression types. This option enables +-both 40-bit and 128-bit encryption. In order for MPPE to successfully +-come up, you must have authenticated with either MS\-CHAP or MS\-CHAPv2. +-This option is presently only supported under Linux, and only if your +-kernel has been configured to include MPPE support. +-.TP +-.B require\-mppe\-40 +-Require the use of MPPE, with 40-bit encryption. +-.TP +-.B require\-mppe\-128 +-Require the use of MPPE, with 128-bit encryption. + .TP + .B require\-mschap + Require the peer to authenticate itself using MS\-CHAP [Microsoft Challenge +diff -ruN ppp-2.4.3-orig/pppdump/Makefile.linux ppp-2.4.3-3/pppdump/Makefile.linux +--- ppp-2.4.3-orig/pppdump/Makefile.linux 2004-10-31 02:36:52.000000000 +0200 ++++ ppp-2.4.3-3/pppdump/Makefile.linux 2004-12-05 17:50:34.000000000 +0100 +@@ -2,7 +2,8 @@ + BINDIR = $(DESTDIR)/sbin + MANDIR = $(DESTDIR)/share/man/man8 + +-CFLAGS= -O -I../include/net ++COPTS = -O ++CFLAGS= $(COPTS) -I../include/net + OBJS = pppdump.o bsd-comp.o deflate.o zlib.o + + INSTALL= install +@@ -17,5 +18,5 @@ + + install: + mkdir -p $(BINDIR) $(MANDIR) +- $(INSTALL) -s -c pppdump $(BINDIR) ++ $(INSTALL) -c pppdump $(BINDIR) + $(INSTALL) -c -m 444 pppdump.8 $(MANDIR) +diff -ruN ppp-2.4.3-orig/pppstats/Makefile.linux ppp-2.4.3-3/pppstats/Makefile.linux +--- ppp-2.4.3-orig/pppstats/Makefile.linux 2004-10-31 23:09:03.000000000 +0100 ++++ ppp-2.4.3-3/pppstats/Makefile.linux 2004-12-05 17:43:38.000000000 +0100 +@@ -22,7 +22,7 @@ + + install: pppstats + -mkdir -p $(MANDIR) +- $(INSTALL) -s -c pppstats $(BINDIR) ++ $(INSTALL) -c pppstats $(BINDIR) + $(INSTALL) -c -m 444 pppstats.8 $(MANDIR) + + pppstats: $(PPPSTATSRCS) |