diff options
Diffstat (limited to 'openwrt/docs/hardware/linksys/wrt54g_v20')
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/cpuinfo.txt | 11 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt | 97 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt | 46 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/info.txt | 19 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt | 113 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt | 37 |
6 files changed, 0 insertions, 323 deletions
diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/cpuinfo.txt deleted file mode 100644 index 122914e50f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/cpuinfo.txt +++ /dev/null @@ -1,11 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 199.47 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt deleted file mode 100644 index 83b60125f2..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt +++ /dev/null @@ -1,97 +0,0 @@ -PU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 -Determined physical RAM map: - memory: 02000000 @ 00000000 (usable) -On node 0 totalpages: 8192 -zone(0): 8192 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 200 MHz -Using 100.000 MHz high precision timer. -Calibrating delay loop... 199.47 BogoMIPS -Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) -Inode cache hash table entries: 2048 (order: 2, 16384 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 8192 (order: 3, 32768 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x2000,blocks=8 -1: offset=0x10000,size=0x10000,blocks=63 -Using word write method -Flash device: 0x400000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000f0000-0x003f0000 : "rootfs" -0x003f0000-0x00400000 : "nvram" -sflash: found no supported devices -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 2048 bind 4096) -ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> -All bugs added by David S. Miller <davem@redhat.com> -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000101 -using v2 hardware -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -5325E VLAN programming for BCM5325E-MDIO I/F switch -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: Setting MAC address to 00 0a 48 06 82 50. -vlan1: add 01:00:5e:00:00:01 mcast address to master interface -device br0 entered promiscuous mode -device br0 left promiscuous mode -device br0 entered promiscuous mode -device br0 left promiscuous mode - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt deleted file mode 100644 index 97922e093a..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/ifconfig.txt +++ /dev/null @@ -1,46 +0,0 @@ -br0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:370 errors:0 dropped:0 overruns:0 frame:0 - TX packets:232 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:22641 (22.1 KiB) TX bytes:37549 (36.6 KiB) - -eth0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 - RX packets:110 errors:0 dropped:0 overruns:0 frame:0 - TX packets:548 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:23978 (23.4 KiB) TX bytes:69928 (68.2 KiB) - Interrupt:5 Base address:0x2000 - -eth1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:90 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:479 errors:0 dropped:0 overruns:0 frame:2 - TX packets:407 errors:4 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:1000 - RX bytes:37211 (36.3 KiB) TX bytes:73096 (71.3 KiB) - Interrupt:4 Base address:0x1000 - -lo Link encap:Local Loopback - inet addr:127.0.0.1 Mask:255.0.0.0 - UP LOOPBACK RUNNING MTU:16436 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) - -vlan0 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:110 errors:0 dropped:0 overruns:0 frame:0 - TX packets:276 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:21998 (21.4 KiB) TX bytes:29605 (28.9 KiB) - -vlan1 Link encap:Ethernet HWaddr 00:0F:66:D3:11:8E - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:272 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:0 - RX bytes:0 (0.0 B) TX bytes:40323 (39.3 KiB) - diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt deleted file mode 100644 index 8278e098ef..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt +++ /dev/null @@ -1,19 +0,0 @@ -Linksys WRT54G v2.0 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 - -CPU: BCM4712 at 200 MHz -RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731) -Flash: 4 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after OpenWRT upgrade -cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) -ifconfig.txt: output of ifconfig (2.4.29) -pci.txt: contents of /proc/pci (2.4.29) -dmesg-2_4_29.txt: dmesg (XH model, 2.4.29) diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt deleted file mode 100644 index 6c37ad6550..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/nvram.txt +++ /dev/null @@ -1,113 +0,0 @@ -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=on -il0macaddr=00:0f:66:d3:11:90 -boardrev=0x10 -et0macaddr=00:0F:66:D3:11:8E -wl0_wep_buf= -watchdog=5000 -boot_wait=on -wl0_macmode1=disabled -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -wl0_ap_ssid= -pmon_ver=CFE 3.51.21.0 -wl0_ifname=eth1 -gpio2=adm_eecs -gpio3=adm_eesk -ifnames=vlan0 vlan1 -vlan0ports=1 2 3 4 5* -gpio5=adm_eedi -gpio6=adm_rc -wl0_mrate=0 -wl0_mode=ap -wl0_ap_isolate=0 -os_flash_addr=bfc40000 -wl0_gmode=1 -sromrev=2 -boardtype=0x0101 -wl0_wep_last= -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=b0rken -wl0_key1= -wl0id=0x4320 -wl0_key2= -wl0_key3= -wl0_key4= -wl_auth_mode=open -ag0=255 -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=1 -wl0_macmode=disabled -wl0_radioids=BCM2050 -wl0_phytype=g -wl0gpio2=0 -wl0_lazywds=1 -wl0gpio3=0 -boardflags2=0 -wl0_afterburner=auto -lan_hwaddr=00:0F:66:D3:11:8E -wl0_antdiv=-1 -wl0_mac_list= -wl0_unit=0 -wl_country_code=AU -pa0itssit=62 -wl0_wds= -cctl=0 -lan_ifnames=vlan0 vlan1 eth1 -wl0_radius_port=1812 -wl0_mac_deny= -wl0_auth=0 -wl0_radius_ipaddr= -pa0maxpwr=0x48 -wan_ifnames=vlan1 -wl_crypto=tkip -lan_proto=static -lan_ipaddr=192.168.1.1 -clkfreq=200 -aa0=3 -vlan1hwname=et0 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -sdram_config=0x0032 -wl0_country=Worldwide -vlan1ports=0 5 -scratch=a0180000 -ccode=0 -wl0_rateset=default -wl0_wep_bit=64 -lan_ifname=br0 -boardflags=0x0188 -wl0_afterburner_override=-1 -sdram_refresh=0x0000 -sdram_ncdl=0x25 -wl0_passphrase= -wl0_rts=2347 -wl_wep=disabled -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -wl0_active_mac= -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:0F:66:D3:11:90 -wl0_wep_gen= -wl0_gmode_protection=auto -pa0b0=0x170c -wl0_maclist= -pa0b1=0xfa24 -pa0b2=0xfe70 -sdram_init=0x0000 -vlan0hwname=et0 -dl_ram_addr=a0001000 -wl0_radius_key= -wl0_corerev=7 -wl0_channel=6 -wl0_auth_mode=open -boot_ver=v2.3 -boardnum=42 -wl0_ap_ip= diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt deleted file mode 100644 index cd7aafc136..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. |