diff options
Diffstat (limited to 'openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt')
-rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt deleted file mode 100644 index 6ff7fba698..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt +++ /dev/null @@ -1,88 +0,0 @@ -Intel_firmware_version=v1.41.8 -boardnum=42 -boardtype=bcm94710dev -boot_date=Fri Sep 26 00:34:47 2003 -boot_ver=v1.5 -boot_wait=on -clkfreq=125 -dl_ram_addr=a0001000 -et0macaddr=00:0C:41:B3:3C:55 -et0mdcport=0 -et0phyaddr=30 -et1macaddr=00:0C:41:B3:3C:56 -et1mdcport=1 -et1phyaddr=30 -firmware_version=v1.42.2 -flash_type=AMD 29lv320DT 2Mx16 TopB -lan_ipaddr=192.168.1.1 -lan_netmask=255.255.255.0 -os_flash_addr=bfc40000 -os_ram_addr=80001000 -pmon_ver=PMON 3.31.15.0 -scratch=a0180000 -sdram_config=0x0000 -sdram_init=0x0419 -sdram_ncdl=0x00000000 -sdram_refresh=0x8040 -watchdog=5000 -wl0_active_mac= -wl0_afterburner=auto -wl0_afterburner_override=-1 -wl0_antdiv=-1 -wl0_ap_ip= -wl0_ap_isolate=0 -wl0_ap_ssid= -wl0_auth=0 -wl0_auth_mode=disabled -wl0_bcn=100 -wl0_channel=6 -wl0_closed=0 -wl0_corerev=5 -wl0_country=Worldwide -wl0_country_code=AU -wl0_crypto=tkip -wl0_dtim=1 -wl0_frag=2346 -wl0_frameburst=on -wl0_gmode=1 -wl0_gmode_protection=auto -wl0_hwaddr=00:0C:41:B3:3C:57 -wl0_ifname=eth2 -wl0_infra=1 -wl0_key1= -wl0_key2= -wl0_key3= -wl0_key4= -wl0_key=1 -wl0_lazywds=1 -wl0_mac_deny= -wl0_mac_list= -wl0_maclist= -wl0_macmode1=disabled -wl0_macmode=disabled -wl0_mode=ap -wl0_mrate=0 -wl0_net_mode=mixed -wl0_passphrase= -wl0_phytype=g -wl0_phytypes=g -wl0_plcphdr=long -wl0_radio=1 -wl0_radioids=BCM2050 -wl0_radius_ipaddr= -wl0_radius_key= -wl0_radius_port=1812 -wl0_rate=0 -wl0_rateset=default -wl0_rts=2347 -wl0_ssid=linksys -wl0_unit=0 -wl0_wds= -wl0_wep=off -wl0_wep_bit=64 -wl0_wep_buf= -wl0_wep_gen= -wl0_wep_last= -wl0_wpa_gtk_rekey=3600 -wl0_wpa_psk= -wl_country_code=AU |