diff options
Diffstat (limited to 'obsolete-buildroot/Makefile')
| -rw-r--r-- | obsolete-buildroot/Makefile | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/obsolete-buildroot/Makefile b/obsolete-buildroot/Makefile deleted file mode 100644 index 45c1e85dfd..0000000000 --- a/obsolete-buildroot/Makefile +++ /dev/null @@ -1,264 +0,0 @@ -# Makefile for a simple busybox/uClibc root filesystem -# -# Copyright (C) 2001-2004 Erik Andersen <andersen@codepoet.org> -# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU Library General Public License as -# published by the Free Software Foundation; either version 2 of the -# License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Library General Public License for more details. -# -# You should have received a copy of the GNU Library General Public -# License along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA - - -############################################################# -# -# EDIT this stuff to suit your system and preferences -# -# Use := when possible to get precomputation, thereby -# speeding up the build process. -# -############################################################# - -SNAPSHOT:=20050101 - -ARCH:=mipsel -#USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT) -USE_UCLIBC_LDSO_0_9_24:=false -#USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT) -USE_NETFILTER_SNAPSHOT:=20041009 -USE_BRIDGE_VERSION:=1.0.4 -BUILD_WITH_LARGEFILE:=true - -OPTIMIZE_FOR_CPU=$(ARCH) - -# Command used to download source code -WGET:=wget --passive-ftp - -# Soft floating point options. -# Notes: -# Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc. -# (i386 support will be added back in at some point.) -# Only tested with multilib enabled. -# For i386, long double is the same as double (64 bits). While this -# is unusual for x86, it seemed the best approach considering the -# limitations in the gcc floating point emulation library. -# For arm, soft float uses the usual libfloat routines. -# Custom specs files are used to set the default gcc mode to soft float -# as a convenience, since you shouldn't link hard and soft float -# together. In fact, arm won't even let you. -# (Un)comment the appropriate line below. -#SOFT_FLOAT:=true -SOFT_FLOAT:=false - -TARGET_OPTIMIZATION=-Os -mips2 -TARGET_DEBUGGING= #-g - -# Currently the unwind stuff seems to work for staticly linked apps but -# not dynamic. So use setjmp/longjmp exceptions by default. -# GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions -GCC_USE_SJLJ_EXCEPTIONS:= - -# Any additional gcc options you may want to include.... -EXTRA_GCC_CONFIG_OPTIONS:= - -# Enable the following if you want locale/gettext/i18n support. -# NOTE! Currently the pregnerated locale stuff only works for x86! -#ENABLE_LOCALE:=true -ENABLE_LOCALE:=false - -# If you want multilib enabled, enable this... -MULTILIB:=--enable-multilib - -# Build/install c++ compiler and libstdc++? -#INSTALL_LIBSTDCPP:=true -INSTALL_LIBSTDCPP:=false - -# Build/install java compiler and libgcj? (requires c++) -# WARNING!!! DOES NOT BUILD FOR TARGET WITHOUT INTERVENTION!!! mjn3 -#INSTALL_LIBGCJ:=true -INSTALL_LIBGCJ:=false - -# For SMP machines some stuff can be run in parallel -#JLEVEL=-j3 - -############################################################# -# -# The list of stuff to build for the target filesystem -# -############################################################# -TARGETS:=host-sed openwrt-code.bin - -PACKAGES:=oidentd iproute2 kmod-sched wshaper zlib openssl openssh pppoecd dropbear chillispot dhcp-fwd ip6tables kmod-ipt6 kmod-ipv6 kmod-nfs kmod-ppp-async kmod-ppp-mppe-mppc ppp pppoecd pptp-server kmod-tun fprobe libpcap libpthread pptp-client vsftpd matrixssl ntpclient radvd strace - -############################################################# -# -# You should probably leave this stuff alone unless you know -# what you are doing. -# -############################################################# - -ifeq ($(SOFT_FLOAT),true) -SOFT_FLOAT_CONFIG_OPTION:=--without-float -TARGET_SOFT_FLOAT:=-msoft-float -ARCH_FPU_SUFFIX:=_nofpu -else -SOFT_FLOAT_CONFIG_OPTION:= -TARGET_SOFT_FLOAT:= -ARCH_FPU_SUFFIX:= -endif - -ifeq ($(INSTALL_LIBGCJ),true) -INSTALL_LIBSTDCPP:=true -endif - -# WARNING -- uClibc currently disables large file support on cris. -ifeq ("$(strip $(ARCH))","cris") -BUILD_WITH_LARGEFILE:=false -endif - -ifneq ($(BUILD_WITH_LARGEFILE),true) -DISABLE_LARGEFILE= --disable-largefile -endif -TARGET_CFLAGS=$(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) - -HOSTCC:=gcc -BASE_DIR:=${shell pwd} -SOURCE_DIR:=$(BASE_DIR)/sources -DL_DIR:=$(SOURCE_DIR)/dl -PATCH_DIR=$(SOURCE_DIR)/patches -BUILD_DIR:=$(BASE_DIR)/build_$(ARCH)$(ARCH_FPU_SUFFIX) -TARGET_DIR:=$(BUILD_DIR)/root -STAGING_DIR=$(BUILD_DIR)/staging_dir -TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX) -TARGET_PATH=$(STAGING_DIR)/bin:/bin:/sbin:/usr/bin:/usr/sbin -IMAGE:=$(BASE_DIR)/root_fs_$(ARCH)$(ARCH_FPU_SUFFIX) -REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux-uclibc -GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux -KERNEL_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc- -TARGET_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc- -TARGET_CC=$(TARGET_CROSS)gcc -#STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded -STRIP=$(STAGING_DIR)/bin/sstrip - -HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \ - -e 's/sparc.*/sparc/' \ - -e 's/arm.*/arm/g' \ - -e 's/m68k.*/m68k/' \ - -e 's/ppc/powerpc/g' \ - -e 's/v850.*/v850/g' \ - -e 's/sh[234]/sh/' \ - -e 's/mips-.*/mips/' \ - -e 's/mipsel-.*/mipsel/' \ - -e 's/cris.*/cris/' \ - -e 's/i[3-9]86/i386/' \ - ) -GNU_HOST_NAME:=$(HOST_ARCH)-pc-linux-gnu -TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \ - AR=$(TARGET_CROSS)ar \ - AS=$(TARGET_CROSS)as \ - LD=$(TARGET_CROSS)ld \ - NM=$(TARGET_CROSS)nm \ - CC=$(TARGET_CROSS)gcc \ - GCC=$(TARGET_CROSS)gcc \ - CXX=$(TARGET_CROSS)g++ \ - RANLIB=$(TARGET_CROSS)ranlib - -ifeq ($(ENABLE_LOCALE),true) -DISABLE_NLS:= -else -DISABLE_NLS:=--disable-nls -endif - -all: world - -TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS)) -TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS)) -TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS)) - - -PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES)) -OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg - -world: $(DL_DIR) $(TARGETS_SOURCE) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS) - @echo "ALL DONE." - -packages: ipkg-utils $(PACKAGES_IPK) - -@mkdir -p $(BASE_DIR)/packages - { \ - cd $(BASE_DIR)/packages; \ - mv $(BUILD_DIR)/*.ipk .; \ - $(IPKG_MAKE_INDEX) . > Packages; \ - } - @echo "ALL DONE." - -.PHONY: all world clean dirclean distclean source $(TARGETS) \ - $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) - -include make/*.mk - -############################################################# -# -# staging and target directories do NOT list these as -# dependancies anywhere else -# -############################################################# -$(DL_DIR): - mkdir $(DL_DIR) - -$(BUILD_DIR): - mkdir $(BUILD_DIR) - -$(STAGING_DIR): - rm -rf $(STAGING_DIR) - mkdir -p $(STAGING_DIR)/lib - mkdir -p $(STAGING_DIR)/usr - ln -fs $(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/include - ln -fs ../lib $(STAGING_DIR)/usr/lib - ln -fs ../$(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/usr/include - - -$(TARGET_DIR): - rm -rf $(TARGET_DIR) - cp -a $(SOURCE_DIR)/openwrt/root/ $(TARGET_DIR) - -find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1 - -source: $(TARGETS_SOURCE) - -############################################################# -# -# Cleanup and misc junk -# -############################################################# -clean: - rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(IMAGE) \ - $(BASE_DIR)/packages \ - openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \ - openwrt-kmodules.tar.bz2 - -dirclean: $(TARGETS_DIRCLEAN) - rm -rf $(TARGET_DIR) $(STAGING_DIR) $(IMAGE) \ - $(BASE_DIR)/packages \ - openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \ - openwrt-kmodules.tar.bz2 - -distclean: - rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE) \ - openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \ - openwrt-kmodules.tar.bz2 - -sourceball: - rm -rf $(BUILD_DIR) - set -e; \ - cd ..; \ - rm -f buildroot.tar.bz2; \ - tar -cvf buildroot.tar buildroot; \ - bzip2 -9 buildroot.tar; \ |