12 files changed, 0 insertions, 534 deletions
diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
deleted file mode 100644
index b04b3501f5..0000000000
--- a/CVSROOT/checkoutlist
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
diff --git a/CVSROOT/ciabot.pl b/CVSROOT/ciabot.pl
deleted file mode 100755
index a4869ed437..0000000000
--- a/CVSROOT/ciabot.pl
+++ /dev/null
@@ -1,327 +0,0 @@
-#!/usr/bin/perl -w
-#
-# ciabot -- Mail a CVS log message to a given address, for the purposes of CIA
-#
-# Loosely based on cvslog by Russ Allbery <rra@stanford.edu>
-# Copyright 1998  Board of Trustees, Leland Stanford Jr. University
-#
-# Copyright 2001, 2003, 2004  Petr Baudis <pasky@ucw.cz>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License version 2, as published by the
-# Free Software Foundation.
-#
-# The master location of this file is
-# http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl.
-#
-# This program is designed to run from the loginfo CVS administration file. It
-# takes a log message, massaging it and mailing it to the address given below.
-#
-# Its record in the loginfo file should look like:
-#
-#       ALL        $CVSROOT/CVSROOT/ciabot.pl %s $USER project from_email dest_email ignore_regexp
-#
-# Note that the last four parameters are optional, you can alternatively change
-# the defaults below in the configuration section.
-#
-# If it does not work, try to disable $xml_rpc in the configuration section
-# below.
-#
-# ciabot.pl,v 1.110 2004/01/09 17:40:13 pasky
-# $Id$
-
-use strict;
-use vars qw ($project $from_email $dest_email $rpc_uri $sendmail $sync_delay
-		$xml_rpc $ignore_regexp $alt_local_message_target);
-
-
-
-
-### Configuration
-
-# Project name (as known to CIA).
-$project = 'ELinks';
-
-# The from address in generated mails.
-$from_email = 'pasky@ucw.cz';
-
-# Mail all reports to this address.
-$dest_email = 'cia@navi.cx';
-
-# If using XML-RPC, connect to this URI.
-$rpc_uri = 'http://cia.navi.cx/RPC2';
-
-# Path to your USCD sendmail compatible binary (your mailer daemon created this
-# program somewhere).
-$sendmail = '/usr/sbin/sendmail';
-
-# Number of seconds to wait for possible concurrent instances. CVS calls up
-# this script for each involved directory separately and this is the sync
-# delay. 5s looks as a safe value, but feel free to increase if you are running
-# this on a slower (or overloaded) machine or if you have really a lot of
-# directories.
-$sync_delay = 5;
-
-# This script can communicate with CIA either by mail or by an XML-RPC
-# interface. The XML-RPC interface is faster and more efficient, however you
-# need to have RPC::XML perl module installed, and some large CVS hosting sites
-# (like Savannah or Sourceforge) might not allow outgoing HTTP connections
-# while they allow outgoing mail. Also, this script will hang and eventually
-# not deliver the event at all if CIA server happens to be down, which is
-# unfortunately not an uncommon condition.
-$xml_rpc = 0;
-
-# You can make this bot to totally ignore events concerning the objects
-# specified below. Each object is composed of <module>/<path>/<filename>,
-# therefore file Manifest in root directory of module gentoo will be called
-# "gentoo/Manifest", while file src/bfu/inphist.c of module elinks will be
-# called "elinks/src/bfu/inphist.c". Easy, isn't it?
-#
-# This variable should contain regexp, against which will each object be
-# checked, and if the regexp is matched, the file is ignored. Therefore ie.  to
-# ignore all changes in the two files above and everything concerning module
-# 'admin', use:
-#
-#$ignore_regexp = "^(gentoo/Manifest|elinks/src/bfu/inphist.c|admin/)";
-$ignore_regexp = "/Manifest\$";
-
-# It can be useful to also grab the generated XML message by some other
-# programs and ie. autogenerate some content based on it. Here you can specify
-# a file to which it will be appended.
-$alt_local_message_target = "";
-
-
-
-
-### The code itself
-
-use vars qw ($user $module $tag @files $logmsg $message);
-
-my @dir; # This array stores all the affected directories
-my @dirfiles;  # This array is mapped to the @dir array and contains files
-               # affected in each directory
-
-
-
-### Input data loading
-
-
-# These arguments are from %s; first the relative path in the repository
-# and then the list of files modified.
-
-@files = split (' ', ($ARGV[0] or ''));
-$dir[0] = shift @files or die "$0: no directory specified\n";
-$dirfiles[0] = "@files" or die "$0: no files specified\n";
-
-
-# Guess module name.
-
-$module = $dir[0]; $module =~ s#/.*##;
-
-
-# Figure out who is doing the update.
-
-$user = $ARGV[1];
-
-
-# Use the optional parameters, if supplied.
-
-$project = $ARGV[2] if $ARGV[2];
-$from_email = $ARGV[3] if $ARGV[3];
-$dest_email = $ARGV[4] if $ARGV[4];
-$ignore_regexp = $ARGV[5] if $ARGV[5];
-
-
-# Parse stdin (what's interesting is the tag and log message)
-
-while (<STDIN>) {
-  $tag = $1 if /^\s*Tag: ([a-zA-Z0-9_-]+)/;
-  last if /^Log Message/;
-}
-
-while (<STDIN>) {
-  next unless ($_ and $_ ne "\n" and $_ ne "\r\n");
-  s/&/&amp;/g;
-  s/</&lt;/g;
-  s/>/&gt;/g;
-  $logmsg .= $_;
-}
-
-
-
-### Remove to-be-ignored files
-
-$dirfiles[0] = join (' ',
-  grep {
-    my $f = "$module/$dir[0]/$_";
-    $f !~ m/$ignore_regexp/;
-  } split (/\s+/, $dirfiles[0])
-) if ($ignore_regexp);
-exit unless $dirfiles[0];
-
-
-
-### Sync between the multiple instances potentially being ran simultanously
-
-my $sum; # _VERY_ simple hash of the log message. It is really weak, but I'm
-         # lazy and it's really sorta exceptional to even get more commits
-         # running simultanously anyway.
-map { $sum += ord $_ } split(//, $logmsg);
-
-my $syncfile; # Name of the file used for syncing
-$syncfile = "/tmp/cvscia.$project.$module.$sum";
-
-
-if (-f $syncfile and -w $syncfile) {
-  # The synchronization file for this file already exists, so we are not the
-  # first ones. So let's just dump what we know and exit.
-
-  open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
-  print FF "$dirfiles[0]!@!$dir[0]\n";
-  close(FF);
-  exit;
-
-} else {
-  # We are the first one! Thus, we'll fork, exit the original instance, and
-  # wait a bit with the new one. Then we'll grab what the others collected and
-  # go on.
-
-  # We don't need to care about permissions since all the instances of the one
-  # commit will obviously live as the same user.
-
-  # system("touch") in a different way
-  open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
-  close(FF);
-
-  exit if (fork);
-  sleep($sync_delay);
-
-  open(FF, $syncfile);
-  my ($dirnum) = 1; # 0 is the one we got triggerred for
-  while (<FF>) {
-    chomp;
-    ($dirfiles[$dirnum], $dir[$dirnum]) = split(/!@!/);
-    $dirnum++;
-  }
-  close(FF);
-
-  unlink($syncfile);
-}
-
-
-
-### Compose the mail message
-
-
-my ($VERSION) = '$Revision$' =~ / (\d+\.\d+) /;
-my $ts = time;
-
-$message = <<EM
-<message>
-   <generator>
-       <name>CIA Perl client for CVS</name>
-       <version>$VERSION</version>
-       <url>http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl</url>
-   </generator>
-   <source>
-       <project>$project</project>
-       <module>$module</module>
-EM
-;
-$message .= "       <branch>$tag</branch>" if ($tag);
-$message .= <<EM
-   </source>
-   <timestamp>
-       $ts
-   </timestamp>
-   <body>
-       <commit>
-           <author>$user</author>
-           <files>
-EM
-;
-
-for (my $dirnum = 0; $dirnum < @dir; $dirnum++) {
-  map {
-    $_ = $dir[$dirnum] . '/' . $_;
-    s#^.*?/##; # weed out the module name
-    s/&/&amp;/g;
-    s/</&lt;/g;
-    s/>/&gt;/g;
-    $message .= "  <file>$_</file>\n";
-  } split(/ /, $dirfiles[$dirnum]);
-}
-
-$message .= <<EM
-           </files>
-           <log>
-$logmsg
-           </log>
-       </commit>
-   </body>
-</message>
-EM
-;
-
-
-
-### Write the message to an alt-target
-
-if ($alt_local_message_target and open (ALT, ">>$alt_local_message_target")) {
-  print ALT $message;
-  close ALT;
-}
-
-
-
-### Send out the XML-RPC message
-
-
-if ($xml_rpc) {
-  # We gotta be careful from now on. We silence all the warnings because
-  # RPC::XML code is crappy and works with undefs etc.
-  $^W = 0;
-  $RPC::XML::ERROR if (0); # silence perl's compile-time warning
-
-  require RPC::XML;
-  require RPC::XML::Client;
-
-  my $rpc_client = new RPC::XML::Client $rpc_uri;
-  my $rpc_request = RPC::XML::request->new('hub.deliver', $message);
-  my $rpc_response = $rpc_client->send_request($rpc_request);
-
-  unless (ref $rpc_response) {
-    die "XML-RPC Error: $RPC::XML::ERROR\n";
-  }
-  exit;
-}
-
-
-
-### Send out the mail
-
-
-# Open our mail program
-
-open (MAIL, "| $sendmail -t -oi -oem") or die "Cannot execute $sendmail : " . ($?>>8);
-
-
-# The mail header
-
-print MAIL <<EOM;
-From: $from_email
-To: $dest_email
-Content-type: text/xml
-Subject: DeliverXML
-
-EOM
-
-print MAIL $message;
-
-
-# Close the mail
-
-close MAIL;
-die "$0: sendmail exit status " . ($? >> 8) . "\n" unless ($? == 0);
-
-# vi: set sw=2:
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
deleted file mode 100644
index b19e7b7a63..0000000000
--- a/CVSROOT/commitinfo
+++ /dev/null
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/config b/CVSROOT/config
deleted file mode 100644
index ff43ec005a..0000000000
--- a/CVSROOT/config
+++ /dev/null
@@ -1,14 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
deleted file mode 100644
index 0accaf1b15..0000000000
--- a/CVSROOT/cvswrappers
+++ /dev/null
@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
deleted file mode 100644
index d78886c152..0000000000
--- a/CVSROOT/editinfo
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
deleted file mode 100644
index c5847835b7..0000000000
--- a/CVSROOT/loginfo
+++ /dev/null
@@ -1,29 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-
-#^buildroot     ( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
-#^root	( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
diff --git a/CVSROOT/modules b/CVSROOT/modules
deleted file mode 100644
index cb9e9efc94..0000000000
--- a/CVSROOT/modules
+++ /dev/null
@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
diff --git a/CVSROOT/notify b/CVSROOT/notify
deleted file mode 100644
index 34f0bc2888..0000000000
--- a/CVSROOT/notify
+++ /dev/null
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
deleted file mode 100644
index 49e59f4d0d..0000000000
--- a/CVSROOT/rcsinfo
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
deleted file mode 100644
index 274a46dd5b..0000000000
--- a/CVSROOT/taginfo
+++ /dev/null
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
deleted file mode 100644
index 86f747ce22..0000000000
--- a/CVSROOT/verifymsg
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.