summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/brcm63xx/config-2.6.35218
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch125
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch117
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch202
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch178
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch386
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch380
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch11
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch98
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch22
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/140-new_bcm96348gw_leds.patch82
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch107
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch246
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch243
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch25
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch279
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch60
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch536
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/240-spi.patch956
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch22
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch16
-rw-r--r--target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch34
22 files changed, 4343 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/config-2.6.35 b/target/linux/brcm63xx/config-2.6.35
new file mode 100644
index 0000000000..519aab1c26
--- /dev/null
+++ b/target/linux/brcm63xx/config-2.6.35
@@ -0,0 +1,218 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_AR7 is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH_COMMON is not set
+CONFIG_AUDIT=y
+CONFIG_AUDIT_GENERIC=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BITREVERSE=y
+CONFIG_BOARD_BCM963XX=y
+# CONFIG_BOARD_LIVEBOX is not set
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRAMFS=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_CS5535 is not set
+CONFIG_GPIO_DEVICE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_CPU=y
+CONFIG_KEXEC=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM963XX=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_POWERTV is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RAMZSWAP is not set
+CONFIG_RELAY=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+# CONFIG_TINY_RCU is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch
new file mode 100644
index 0000000000..a70b5012e3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch
@@ -0,0 +1,125 @@
+The bcm63xx SOC has an integrated OHCI controller, this patch adds
+platform device registration and change board code to register ohci
+device when necessary.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 6 ++
+ arch/mips/bcm63xx/Makefile | 3 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
+ arch/mips/bcm63xx/dev-usb-ohci.c | 49 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++
+ 5 files changed, 67 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
+ config BCM63XX_CPU_6348
+ bool "support 6348 CPU"
+ select HW_HAS_PCI
++ select USB_ARCH_HAS_OHCI
++ select USB_OHCI_BIG_ENDIAN_DESC
++ select USB_OHCI_BIG_ENDIAN_MMIO
+
+ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
+ select HW_HAS_PCI
++ select USB_ARCH_HAS_OHCI
++ select USB_OHCI_BIG_ENDIAN_DESC
++ select USB_OHCI_BIG_ENDIAN_MMIO
+ endmenu
+
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,5 +1,6 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
++ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
++ dev-usb-ohci.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+ obj-y += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -25,6 +25,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_dsp.h>
+ #include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <board_bcm963xx.h>
+
+ #define PFX "board_bcm963xx: "
+@@ -877,6 +878,9 @@ int __init board_register_devices(void)
+ !board_get_mac_address(board.enet1.mac_addr))
+ bcm63xx_enet_register(1, &board.enet1);
+
++ if (board.has_ohci0)
++ bcm63xx_ohci_register();
++
+ if (board.has_dsp)
+ bcm63xx_dsp_register(&board.dsp);
+
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,49 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++ {
++ /* start & end filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ /* start filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 ohci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ohci_device = {
++ .name = "bcm63xx_ohci",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(ohci_resources),
++ .resource = ohci_resources,
++ .dev = {
++ .dma_mask = &ohci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
++ return 0;
++
++ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++ ohci_resources[0].end = ohci_resources[0].start;
++ ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++ return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch
new file mode 100644
index 0000000000..0c236f0b7c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch
@@ -0,0 +1,117 @@
+The bcm63xx SOC has an integrated EHCI controller, this patch adds
+platform device registration and change board code to register
+EHCI device when necessary.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/Makefile | 2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
+ arch/mips/bcm63xx/dev-usb-ehci.c | 49 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++
+ 5 files changed, 62 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
++ select USB_ARCH_HAS_EHCI
++ select USB_EHCI_BIG_ENDIAN_MMIO
+ endmenu
+
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+- dev-usb-ohci.o
++ dev-usb-ohci.o dev-usb-ehci.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+ obj-y += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_dsp.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <board_bcm963xx.h>
+
+ #define PFX "board_bcm963xx: "
+@@ -878,6 +879,9 @@ int __init board_register_devices(void)
+ !board_get_mac_address(board.enet1.mac_addr))
+ bcm63xx_enet_register(1, &board.enet1);
+
++ if (board.has_ehci0)
++ bcm63xx_ehci_register();
++
+ if (board.has_ohci0)
+ bcm63xx_ohci_register();
+
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,49 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++ {
++ /* start & end filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ /* start filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 ehci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ehci_device = {
++ .name = "bcm63xx_ehci",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(ehci_resources),
++ .resource = ehci_resources,
++ .dev = {
++ .dma_mask = &ehci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++ if (!BCMCPU_IS_6358())
++ return 0;
++
++ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++ ehci_resources[0].end = ehci_resources[0].start;
++ ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++ return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch
new file mode 100644
index 0000000000..179421ccbf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch
@@ -0,0 +1,202 @@
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/usb/host/ohci-bcm63xx.c | 166 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ohci-hcd.c | 5 +
+ drivers/usb/host/ohci.h | 2 +-
+ 3 files changed, 172 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/usb/host/ohci-bcm63xx.c
+
+--- /dev/null
++++ b/drivers/usb/host/ohci-bcm63xx.c
+@@ -0,0 +1,166 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static struct clk *usb_host_clock;
++
++static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int ret;
++
++ /*
++ * port 2 can be shared with USB slave, but all boards seem to
++ * have only one host port populated, so we can hardcode it
++ */
++ ohci->num_ports = 1;
++
++ ret = ohci_init(ohci);
++ if (ret < 0)
++ return ret;
++
++ ret = ohci_run(ohci);
++ if (ret < 0) {
++ err("can't start %s", hcd->self.bus_name);
++ ohci_stop(hcd);
++ return ret;
++ }
++ return 0;
++}
++
++static const struct hc_driver ohci_bcm63xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "BCM63XX integrated OHCI controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_USB11 | HCD_MEMORY,
++ .start = ohci_bcm63xx_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++ .get_frame_number = ohci_get_frame,
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res_mem;
++ struct usb_hcd *hcd;
++ struct ohci_hcd *ohci;
++ u32 reg;
++ int ret, irq;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irq = platform_get_irq(pdev, 0);
++ if (!res_mem || irq < 0)
++ return -ENODEV;
++
++ if (BCMCPU_IS_6348()) {
++ struct clk *clk;
++ /* enable USB host clock */
++ clk = clk_get(&pdev->dev, "usbh");
++ if (IS_ERR(clk))
++ return -ENODEV;
++
++ clk_enable(clk);
++ usb_host_clock = clk;
++ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++
++ } else if (BCMCPU_IS_6358()) {
++ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++ /*
++ * The magic value comes for the original vendor BSP
++ * and is needed for USB to work. Datasheet does not
++ * help, so the magic value is used as-is.
++ */
++ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++ } else
++ return 0;
++
++ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++ if (!hcd)
++ return -ENOMEM;
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_debug("request_mem_region failed\n");
++ ret = -EBUSY;
++ goto out;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ pr_debug("ioremap failed\n");
++ ret = -EIO;
++ goto out1;
++ }
++
++ ohci = hcd_to_ohci(hcd);
++ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
++ OHCI_QUIRK_FRAME_NO;
++ ohci_hcd_init(ohci);
++
++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++ if (ret)
++ goto out2;
++
++ platform_set_drvdata(pdev, hcd);
++ return 0;
++
++out2:
++ iounmap(hcd->regs);
++out1:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(pdev);
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ usb_put_hcd(hcd);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ if (usb_host_clock) {
++ clk_disable(usb_host_clock);
++ clk_put(usb_host_clock);
++ }
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver ohci_hcd_bcm63xx_driver = {
++ .probe = ohci_hcd_bcm63xx_drv_probe,
++ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .name = "bcm63xx_ohci",
++ .owner = THIS_MODULE,
++ },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ohci");
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1061,6 +1061,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_hcd_da8xx_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ohci-bcm63xx.c"
++#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
++#endif
++
+ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -655,7 +655,7 @@ static inline u32 hc32_to_cpup (const st
+ * some big-endian SOC implementations. Same thing happens with PSW access.
+ */
+
+-#ifdef CONFIG_PPC_MPC52xx
++#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
+ #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci) 0
diff --git a/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch
new file mode 100644
index 0000000000..331753bd5a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch
@@ -0,0 +1,178 @@
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ 2 files changed, 159 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-bcm63xx.c
+
+--- /dev/null
++++ b/drivers/usb/host/ehci-bcm63xx.c
+@@ -0,0 +1,154 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int retval;
++
++ retval = ehci_halt(ehci);
++ if (retval)
++ return retval;
++
++ retval = ehci_init(hcd);
++ if (retval)
++ return retval;
++
++ ehci_reset(ehci);
++ ehci_port_power(ehci, 0);
++
++ return retval;
++}
++
++
++static const struct hc_driver ehci_bcm63xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "BCM63XX integrated EHCI controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_bcm63xx_setup,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++};
++
++static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res_mem;
++ struct usb_hcd *hcd;
++ struct ehci_hcd *ehci;
++ u32 reg;
++ int ret, irq;
++
++ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irq = platform_get_irq(pdev, 0);;
++ if (!res_mem || irq < 0)
++ return -ENODEV;
++
++ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
++ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++
++ /*
++ * The magic value comes for the original vendor BSP and is
++ * needed for USB to work. Datasheet does not help, so the
++ * magic value is used as-is.
++ */
++ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++
++ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++ if (!hcd)
++ return -ENOMEM;
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_debug("request_mem_region failed\n");
++ ret = -EBUSY;
++ goto out;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ pr_debug("ioremap failed\n");
++ ret = -EIO;
++ goto out1;
++ }
++
++ ehci = hcd_to_ehci(hcd);
++ ehci->big_endian_mmio = 1;
++ ehci->big_endian_desc = 0;
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++ ehci->sbrn = 0x20;
++
++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++ if (ret)
++ goto out2;
++
++ platform_set_drvdata(pdev, hcd);
++ return 0;
++
++out2:
++ iounmap(hcd->regs);
++out1:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++
++ hcd = platform_get_drvdata(pdev);
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ usb_put_hcd(hcd);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ platform_set_drvdata(pdev, NULL);
++ return 0;
++}
++
++static struct platform_driver ehci_hcd_bcm63xx_driver = {
++ .probe = ehci_hcd_bcm63xx_drv_probe,
++ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .name = "bcm63xx_ehci",
++ .owner = THIS_MODULE,
++ },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ehci");
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_atmel_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ehci-bcm63xx.c"
++#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch b/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch
new file mode 100644
index 0000000000..2a75d06a60
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch
@@ -0,0 +1,386 @@
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
+
+ # PARISC Architecture
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -875,6 +875,16 @@ config TXX9_WDT
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config BCM63XX_WDT
++ tristate "Broadcom BCM63xx hardware watchdog"
++ depends on BCM63XX
++ help
++ Watchdog driver for the built in watchdog hardware in Broadcom
++ BCM63xx SoC.
++
++ To compile thi driver as a loadable module, choose M here.
++ The module will be called bcm63xx_wdt.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- /dev/null
++++ b/drivers/watchdog/bcm63xx_wdt.c
+@@ -0,0 +1,354 @@
++/*
++ * Broadcom BCM63xx SoC watchdog driver
++ *
++ * Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com>
++ * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/bitops.h>
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/reboot.h>
++#include <linux/types.h>
++#include <linux/uaccess.h>
++#include <linux/watchdog.h>
++#include <linux/timer.h>
++#include <linux/jiffies.h>
++#include <linux/interrupt.h>
++#include <linux/ptrace.h>
++#include <linux/resource.h>
++#include <linux/platform_device.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_timer.h>
++
++#define PFX KBUILD_MODNAME
++
++#define WDT_HZ 50000000 /* Fclk */
++#define WDT_DEFAULT_TIME 30 /* seconds */
++#define WDT_MAX_TIME 256 /* seconds */
++
++static struct {
++ void __iomem *regs;
++ struct timer_list timer;
++ int default_ticks;
++ unsigned long inuse;
++ atomic_t ticks;
++} bcm63xx_wdt_device;
++
++static int expect_close;
++
++static int wdt_time = WDT_DEFAULT_TIME;
++static int nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++/* HW functions */
++static void bcm63xx_wdt_hw_start(void)
++{
++ bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG);
++ bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
++ bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
++}
++
++static void bcm63xx_wdt_hw_stop(void)
++{
++ bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
++ bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
++}
++
++static void bcm63xx_wdt_isr(void *data)
++{
++ struct pt_regs *regs = get_irq_regs();
++
++ die(PFX " fire", regs);
++}
++
++static void bcm63xx_timer_tick(unsigned long unused)
++{
++ if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) {
++ bcm63xx_wdt_hw_start();
++ mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ);
++ } else
++ printk(KERN_CRIT PFX ": watchdog will restart system\n");
++}
++
++static void bcm63xx_wdt_pet(void)
++{
++ atomic_set(&bcm63xx_wdt_device.ticks, wdt_time);
++}
++
++static void bcm63xx_wdt_start(void)
++{
++ bcm63xx_wdt_pet();
++ bcm63xx_timer_tick(0);
++}
++
++static void bcm63xx_wdt_pause(void)
++{
++ del_timer_sync(&bcm63xx_wdt_device.timer);
++ bcm63xx_wdt_hw_stop();
++}
++
++static int bcm63xx_wdt_settimeout(int new_time)
++{
++ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
++ return -EINVAL;
++
++ wdt_time = new_time;
++
++ return 0;
++}
++
++static int bcm63xx_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse))
++ return -EBUSY;
++
++ bcm63xx_wdt_start();
++ return nonseekable_open(inode, file);
++}
++
++static int bcm63xx_wdt_release(struct inode *inode, struct file *file)
++{
++ if (expect_close == 42)
++ bcm63xx_wdt_pause();
++ else {
++ printk(KERN_CRIT PFX
++ ": Unexpected close, not stopping watchdog!\n");
++ bcm63xx_wdt_start();
++ }
++ clear_bit(0, &bcm63xx_wdt_device.inuse);
++ expect_close = 0;
++ return 0;
++}
++
++static ssize_t bcm63xx_wdt_write(struct file *file, const char *data,
++ size_t len, loff_t *ppos)
++{
++ if (len) {
++ if (!nowayout) {
++ size_t i;
++
++ /* In case it was set long ago */
++ expect_close = 0;
++
++ for (i = 0; i != len; i++) {
++ char c;
++ if (get_user(c, data + i))
++ return -EFAULT;
++ if (c == 'V')
++ expect_close = 42;
++ }
++ }
++ bcm63xx_wdt_pet();
++ }
++ return len;
++}
++
++static struct watchdog_info bcm63xx_wdt_info = {
++ .identity = PFX,
++ .options = WDIOF_SETTIMEOUT |
++ WDIOF_KEEPALIVEPING |
++ WDIOF_MAGICCLOSE,
++};
++
++
++static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
++ unsigned long arg)
++{
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++ int new_value, retval = -EINVAL;
++
++ switch (cmd) {
++ case WDIOC_GETSUPPORT:
++ return copy_to_user(argp, &bcm63xx_wdt_info,
++ sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0;
++
++ case WDIOC_GETSTATUS:
++ case WDIOC_GETBOOTSTATUS:
++ return put_user(0, p);
++
++ case WDIOC_SETOPTIONS:
++ if (get_user(new_value, p))
++ return -EFAULT;
++
++ if (new_value & WDIOS_DISABLECARD) {
++ bcm63xx_wdt_pause();
++ retval = 0;
++ }
++ if (new_value & WDIOS_ENABLECARD) {
++ bcm63xx_wdt_start();
++ retval = 0;
++ }
++
++ return retval;
++
++ case WDIOC_KEEPALIVE:
++ bcm63xx_wdt_pet();
++ return 0;
++
++ case WDIOC_SETTIMEOUT:
++ if (get_user(new_value, p))
++ return -EFAULT;
++
++ if (bcm63xx_wdt_settimeout(new_value))
++ return -EINVAL;
++
++ bcm63xx_wdt_pet();
++
++ case WDIOC_GETTIMEOUT:
++ return put_user(wdt_time, p);
++
++ default:
++ return -ENOTTY;
++
++ }
++}
++
++static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
++ unsigned long code, void *unused)
++{
++ if (code == SYS_DOWN || code == SYS_HALT)
++ bcm63xx_wdt_pause();
++ return NOTIFY_DONE;
++}
++
++static const struct file_operations bcm63xx_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = bcm63xx_wdt_write,
++ .unlocked_ioctl = bcm63xx_wdt_ioctl,
++ .open = bcm63xx_wdt_open,
++ .release = bcm63xx_wdt_release,
++};
++
++static struct miscdevice bcm63xx_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &bcm63xx_wdt_fops,
++};
++
++static struct notifier_block bcm63xx_wdt_notifier = {
++ .notifier_call = bcm63xx_wdt_notify_sys,
++};
++
++
++static int bcm63xx_wdt_probe(struct platform_device *pdev)
++{
++ int ret;
++ struct resource *r;
++
++ setup_timer(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0L);
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!r) {
++ printk(KERN_ERR PFX
++ "failed to retrieve resources\n");
++ return -ENODEV;
++ }
++
++ bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start);
++ if (!bcm63xx_wdt_device.regs) {
++ printk(KERN_ERR PFX
++ "failed to remap I/O resources\n");
++ return -ENXIO;
++ }
++
++ ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL);
++ if (ret < 0) {
++ printk(KERN_ERR PFX
++ "failed to register wdt timer isr\n");
++ goto unmap;
++ }
++
++ if (bcm63xx_wdt_settimeout(wdt_time)) {
++ bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME);
++ printk(KERN_INFO PFX
++ ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
++ wdt_time);
++ }
++
++ ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
++ if (ret) {
++ printk(KERN_ERR PFX
++ "failed to register reboot_notifier\n");
++ goto unregister_timer;
++ }
++
++ ret = misc_register(&bcm63xx_wdt_miscdev);
++ if (ret < 0) {
++ printk(KERN_ERR PFX
++ "failed to register watchdog device\n");
++ goto unregister_reboot_notifier;
++ }
++
++ printk(KERN_INFO PFX " started, timer margin: %d sec\n", WDT_DEFAULT_TIME);
++
++ return 0;
++
++unregister_reboot_notifier:
++ unregister_reboot_notifier(&bcm63xx_wdt_notifier);
++unregister_timer:
++ bcm63xx_timer_unregister(TIMER_WDT_ID);
++unmap:
++ iounmap(bcm63xx_wdt_device.regs);
++ return ret;
++}
++
++static int bcm63xx_wdt_remove(struct platform_device *pdev)
++{
++ if (!nowayout)
++ bcm63xx_wdt_pause();
++
++ misc_deregister(&bcm63xx_wdt_miscdev);
++
++ iounmap(bcm63xx_wdt_device.regs);
++
++ unregister_reboot_notifier(&bcm63xx_wdt_notifier);
++ bcm63xx_timer_unregister(TIMER_WDT_ID);
++
++ return 0;
++}
++
++static struct platform_driver bcm63xx_wdt = {
++ .probe = bcm63xx_wdt_probe,
++ .remove = bcm63xx_wdt_remove,
++ .driver = {
++ .name = "bcm63xx-wdt",
++ }
++};
++
++static int __init bcm63xx_wdt_init(void)
++{
++ return platform_driver_register(&bcm63xx_wdt);
++}
++
++static void __exit bcm63xx_wdt_exit(void)
++{
++ platform_driver_unregister(&bcm63xx_wdt);
++}
++
++module_init(bcm63xx_wdt_init);
++module_exit(bcm63xx_wdt_exit);
++
++MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
++MODULE_ALIAS("platform:bcm63xx-wdt");
diff --git a/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch
new file mode 100644
index 0000000000..ad7d73ad1c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch
@@ -0,0 +1,380 @@
+From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ drivers/mtd/maps/Kconfig | 7 +++++++
+ drivers/mtd/maps/Makefile | 1 +
+ drivers/mtd/redboot.c | 13 ++++++++++---
+ 3 files changed, 18 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -251,6 +251,13 @@ config MTD_NETtel
+ help
+ Support for flash chips on NETtel/SecureEdge/SnapGear boards.
+
++config MTD_BCM963XX
++ tristate "BCM963xx Flash device"
++ depends on MIPS && BCM63XX
++ help
++ Flash memory access on BCM963xx boards. Currently only works with
++ RedBoot and CFE.
++
+ config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
+ return 1;
+ }
+
+-static int parse_redboot_partitions(struct mtd_info *master,
++int parse_redboot_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long fis_origin)
+ {
+@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
+ goto out;
+ }
+
++ if (!fis_origin) {
++ for (i = 0; i < numslots; i++) {
++ if (!strncmp(buf[i].name, "RedBoot", 8)) {
++ fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
++ }
++ }
++ }
++
+ for (i = 0; i < numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
+ new_fl->img = &buf[i];
+ if (fis_origin) {
+ buf[i].flash_base -= fis_origin;
+- } else {
+- buf[i].flash_base &= master->size-1;
+ }
++ buf[i].flash_base &= (master->size << 1) - 1;
+
+ /* I'm sure the JFFS2 code has done me permanent damage.
+ * I now think the following is _normal_
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy
+ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
+--- /dev/null
++++ b/drivers/mtd/maps/bcm963xx-flash.c
+@@ -0,0 +1,267 @@
++/*
++ * Copyright (C) 2006-2008 Florian Fainelli <florian@openwrt.org>
++ * Mike Albon <malbon@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/platform_device.h>
++
++#include <bcm_tag.h>
++#include <asm/io.h>
++
++#define BUSWIDTH 2 /* Buswidth */
++#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
++
++#define PFX KBUILD_MODNAME ": "
++
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
++static struct mtd_partition *parsed_parts;
++
++static struct mtd_info *bcm963xx_mtd_info;
++
++static struct map_info bcm963xx_map = {
++ .name = "bcm963xx",
++ .bankwidth = BUSWIDTH,
++};
++
++
++static int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts)
++{
++ int nrparts = 3, curpart = 0; /* CFE,NVRAM and global LINUX are always present. */
++ struct bcm_tag *buf;
++ struct mtd_partition *parts;
++ int ret;
++ size_t retlen;
++ unsigned int rootfsaddr, kerneladdr, spareaddr;
++ unsigned int rootfslen, kernellen, sparelen, totallen;
++ int namelen = 0;
++ int i;
++ char *boardid;
++ char *tagversion;
++
++ /* Allocate memory for buffer */
++ buf = vmalloc(sizeof(struct bcm_tag));
++ if (!buf)
++ return -ENOMEM;
++
++ /* Get the tag */
++ ret = master->read(master, master->erasesize, sizeof(struct bcm_tag), &retlen, (void *)buf);
++ if (retlen != sizeof(struct bcm_tag)){
++ vfree(buf);
++ return -EIO;
++ }
++
++ sscanf(buf->kernelAddress, "%u", &kerneladdr);
++ sscanf(buf->kernelLength, "%u", &kernellen);
++ sscanf(buf->totalLength, "%u", &totallen);
++ tagversion = &(buf->tagVersion[0]);
++ boardid = &(buf->boardid[0]);
++
++ printk(KERN_INFO PFX "CFE boot tag found with version %s and board type %s\n",tagversion, boardid);
++
++ kerneladdr = kerneladdr - EXTENDED_SIZE;
++ rootfsaddr = kerneladdr + kernellen;
++ spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
++ sparelen = master->size - spareaddr - master->erasesize;
++ rootfslen = spareaddr - rootfsaddr;
++
++ /* Determine number of partitions */
++ namelen = 8;
++ if (rootfslen > 0){
++ nrparts++;
++ namelen =+ 6;
++ };
++ if (kernellen > 0) {
++ nrparts++;
++ namelen =+ 6;
++ };
++
++ /* Ask kernel for more memory */
++ parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
++ if (!parts) {
++ vfree(buf);
++ return -ENOMEM;
++ };
++
++ /* Start building partition list */
++ parts[curpart].name = "CFE";
++ parts[curpart].offset = 0;
++ parts[curpart].size = master->erasesize;
++ curpart++;
++
++ if (kernellen > 0) {
++ parts[curpart].name = "kernel";
++ parts[curpart].offset = kerneladdr;
++ parts[curpart].size = kernellen;
++ curpart++;
++ };
++
++ if (rootfslen > 0) {
++ parts[curpart].name = "rootfs";
++ parts[curpart].offset = rootfsaddr;
++ parts[curpart].size = rootfslen;
++ if (sparelen > 0)
++ parts[curpart].size += sparelen;
++ curpart++;
++ };
++
++ parts[curpart].name = "nvram";
++ parts[curpart].offset = master->size - master->erasesize;
++ parts[curpart].size = master->erasesize;
++
++ /* Global partition "linux" to make easy firmware upgrade */
++ curpart++;
++ parts[curpart].name = "linux";
++ parts[curpart].offset = parts[0].size;
++ parts[curpart].size = master->size - parts[0].size - parts[3].size;
++
++ for (i = 0; i < nrparts; i++)
++ printk(KERN_INFO PFX "Partition %d is %s offset %lx and length %lx\n", i, parts[i].name, (long unsigned int)(parts[i].offset), (long unsigned int)(parts[i].size));
++
++ printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n", spareaddr, sparelen);
++ *pparts = parts;
++ vfree(buf);
++
++ return nrparts;
++};
++
++static int bcm963xx_detect_cfe(struct mtd_info *master)
++{
++ int idoffset = 0x4e0;
++ static char idstring[8] = "CFE1CFE1";
++ char buf[9];
++ int ret;
++ size_t retlen;
++
++ ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
++ buf[retlen] = 0;
++ printk(KERN_INFO PFX "Read Signature value of %s\n", buf);
++
++ return strncmp(idstring, buf, 8);
++}
++
++static int bcm963xx_probe(struct platform_device *pdev)
++{
++ int err = 0;
++ int parsed_nr_parts = 0;
++ char *part_type;
++ struct resource *r;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ bcm963xx_map.phys = r->start;
++ bcm963xx_map.size = (r->end - r->start) + 1;
++ bcm963xx_map.virt = ioremap(r->start, r->end - r->start + 1);
++
++ if (!bcm963xx_map.virt) {
++ printk(KERN_ERR PFX "Failed to ioremap\n");
++ return -EIO;
++ }
++ printk(KERN_INFO PFX "0x%08lx at 0x%08x\n", bcm963xx_map.size, bcm963xx_map.phys);
++
++ simple_map_init(&bcm963xx_map);
++
++ bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
++ if (!bcm963xx_mtd_info) {
++ printk(KERN_ERR PFX "Failed to probe using CFI\n");
++ err = -EIO;
++ goto err_probe;
++ }
++
++ bcm963xx_mtd_info->owner = THIS_MODULE;
++
++ /* This is mutually exclusive */
++ if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) {
++ printk(KERN_INFO PFX "CFE bootloader detected\n");
++ if (parsed_nr_parts == 0) {
++ int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts);
++ if (ret > 0) {
++ part_type = "CFE";
++ parsed_nr_parts = ret;
++ }
++ }
++ } else {
++ printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
++ if (bcm963xx_mtd_info->size > 0x00400000) {
++ printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
++ bcm963xx_map.virt = (u32)(EXTENDED_SIZE);
++ }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ if (parsed_nr_parts == 0) {
++ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
++ if (ret > 0) {
++ part_type = "RedBoot";
++ parsed_nr_parts = ret;
++ }
++ }
++#endif
++ }
++
++ return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
++
++err_probe:
++ iounmap(bcm963xx_map.virt);
++ return err;
++}
++
++static int bcm963xx_remove(struct platform_device *pdev)
++{
++ if (bcm963xx_mtd_info) {
++ del_mtd_partitions(bcm963xx_mtd_info);
++ map_destroy(bcm963xx_mtd_info);
++ }
++
++ if (bcm963xx_map.virt) {
++ iounmap(bcm963xx_map.virt);
++ bcm963xx_map.virt = 0;
++ }
++
++ return 0;
++}
++
++static struct platform_driver bcm63xx_mtd_dev = {
++ .probe = bcm963xx_probe,
++ .remove = bcm963xx_remove,
++ .driver = {
++ .name = "bcm963xx-flash",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init bcm963xx_mtd_init(void)
++{
++ return platform_driver_register(&bcm63xx_mtd_dev);
++}
++
++static void __exit bcm963xx_mtd_exit(void)
++{
++ platform_driver_unregister(&bcm63xx_mtd_dev);
++}
++
++module_init(bcm963xx_mtd_init);
++module_exit(bcm963xx_mtd_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Broadcom BCM63xx MTD partition parser/mapping for CFE and RedBoot");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -816,20 +816,6 @@ void __init board_setup(void)
+ panic("unexpected CPU for bcm963xx board");
+ }
+
+-static struct mtd_partition mtd_partitions[] = {
+- {
+- .name = "cfe",
+- .offset = 0x0,
+- .size = 0x40000,
+- }
+-};
+-
+-static struct physmap_flash_data flash_data = {
+- .width = 2,
+- .nr_parts = ARRAY_SIZE(mtd_partitions),
+- .parts = mtd_partitions,
+-};
+-
+ static struct resource mtd_resources[] = {
+ {
+ .start = 0, /* filled at runtime */
+@@ -839,12 +825,9 @@ static struct resource mtd_resources[] =
+ };
+
+ static struct platform_device mtd_dev = {
+- .name = "physmap-flash",
++ .name = "bcm963xx-flash",
+ .resource = mtd_resources,
+ .num_resources = ARRAY_SIZE(mtd_resources),
+- .dev = {
+- .platform_data = &flash_data,
+- },
+ };
+
+ static struct gpio_led_platform_data bcm63xx_led_data;
diff --git a/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644
index 0000000000..e9fe0d9144
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch
@@ -0,0 +1,11 @@
+--- a/drivers/net/bcm63xx_enet.c
++++ b/drivers/net/bcm63xx_enet.c
+@@ -1520,7 +1520,7 @@ static int compute_hw_mtu(struct bcm_ene
+ actual_mtu = mtu;
+
+ /* add ethernet header + vlan tag size */
+- actual_mtu += VLAN_ETH_HLEN;
++ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+
+ if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
+ return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch b/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch
new file mode 100644
index 0000000000..786c18b777
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch
@@ -0,0 +1,98 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -15,6 +15,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/gpio_buttons.h>
++#include <linux/input.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -296,6 +298,16 @@ static struct board_info __initdata boar
+ .active_low = 1,
+ },
+ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
+ };
+
+ static struct board_info __initdata board_96348gw = {
+@@ -354,6 +366,16 @@ static struct board_info __initdata boar
+ .active_low = 1,
+ },
+ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 36,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
+ };
+
+ static struct board_info __initdata board_FAST2404 = {
+@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp
+ .dev.platform_data = &bcm63xx_led_data,
+ };
+
++static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
++ .poll_interval = 20,
++};
++
++static struct platform_device bcm63xx_gpio_buttons_device = {
++ .name = "gpio-buttons",
++ .id = 0,
++ .dev.platform_data = &bcm63xx_gpio_buttons_data,
++};
++
+ /*
+ * third stage init callback, register all board devices.
+ */
+ int __init board_register_devices(void)
+ {
+ u32 val;
++ int button_count = 0;
+
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+@@ -888,5 +921,16 @@ int __init board_register_devices(void)
+
+ platform_device_register(&bcm63xx_gpio_leds);
+
++ /* count number of BUTTONs defined by this device */
++ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++ button_count++;
++
++ if (button_count) {
++ bcm63xx_gpio_buttons_data.nbuttons = button_count;
++ bcm63xx_gpio_buttons_data.buttons = board.buttons;
++
++ platform_device_register(&bcm63xx_gpio_buttons_device);
++ }
++
+ return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -57,6 +57,9 @@ struct board_info {
+
+ /* GPIO LEDs */
+ struct gpio_led leds[5];
++
++ /* Buttons */
++ struct gpio_button buttons[2];
+ };
+
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch b/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch
new file mode 100644
index 0000000000..99ee29f910
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -852,6 +852,10 @@ static struct platform_device mtd_dev =
+ .num_resources = ARRAY_SIZE(mtd_resources),
+ };
+
++static struct resource gpiodev_resource = {
++ .start = 0xFFFFFFFF,
++};
++
+ static struct gpio_led_platform_data bcm63xx_led_data;
+
+ static struct platform_device bcm63xx_gpio_leds = {
+@@ -916,6 +920,8 @@ int __init board_register_devices(void)
+
+ platform_device_register(&mtd_dev);
+
++ platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
++
+ bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+ bcm63xx_led_data.leds = board.leds;
+
diff --git a/target/linux/brcm63xx/patches-2.6.35/140-new_bcm96348gw_leds.patch b/target/linux/brcm63xx/patches-2.6.35/140-new_bcm96348gw_leds.patch
new file mode 100644
index 0000000000..5d3fcfd0f5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/140-new_bcm96348gw_leds.patch
@@ -0,0 +1,82 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -345,24 +345,39 @@ static struct board_info __initdata boar
+ .active_low = 1,
+ },
+ {
+- .name = "ppp",
+- .gpio = 3,
++ .name = "power",
++ .gpio = 0,
+ .active_low = 1,
++ .default_trigger = "default-on",
+ },
+ {
+- .name = "ppp-fail",
++ .name = "stop",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "line1",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+- .name = "power",
+- .gpio = 0,
++ .name = "line2",
++ .gpio = 5,
+ .active_low = 1,
+- .default_trigger = "default-on",
+ },
+ {
+- .name = "stop",
+- .gpio = 1,
++ .name = "line3",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ {
++ .name = "tel",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "eth",
++ .gpio = 35,
+ .active_low = 1,
+ },
+ },
+@@ -880,6 +895,7 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+ u32 val;
++ int led_count = 0;
+ int button_count = 0;
+
+ if (board.has_uart0)
+@@ -922,7 +938,11 @@ int __init board_register_devices(void)
+
+ platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
+
+- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
++ /* count number of LEDs defined by this device */
++ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++ led_count++;
++
++ bcm63xx_led_data.num_leds = led_count;
+ bcm63xx_led_data.leds = board.leds;
+
+ platform_device_register(&bcm63xx_gpio_leds);
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -56,7 +56,7 @@ struct board_info {
+ struct bcm63xx_dsp_platform_data dsp;
+
+ /* GPIO LEDs */
+- struct gpio_led leds[5];
++ struct gpio_led leds[8];
+
+ /* Buttons */
+ struct gpio_button buttons[2];
diff --git a/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch
new file mode 100644
index 0000000000..a13a9434cf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch
@@ -0,0 +1,107 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -603,6 +603,93 @@ static struct board_info __initdata boar
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
++
++ .leds = {
++ /*Each led on alice gate is bi-color */
++ {
++ .name = "power:red",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "power:green",
++ .gpio = 4,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "service:red",
++ .gpio = 7,
++ .active_low = 1,
++ },
++ {
++ .name = "service:green",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ {
++ .name = "adsl:red",
++ .gpio = 9,
++ .active_low = 1,
++ },
++ {
++ .name = "adsl:green",
++ .gpio = 10,
++ .active_low = 1,
++ },
++ {
++ .name = "wifi:red",
++ .gpio = 23,
++ .active_low = 1,
++ },
++ {
++ .name = "wifi:green",
++ .gpio = 22,
++ .active_low = 1,
++ },
++ {
++ .name = "internet:red",
++ .gpio = 25,
++ .active_low = 1,
++ },
++ {
++ .name = "internet:green",
++ .gpio = 24,
++ .active_low = 1,
++ },
++ {
++ .name = "usr1:red",
++ .gpio = 27,
++ .active_low = 1,
++ },
++ {
++ .name = "usr1:green",
++ .gpio = 26,
++ .active_low = 1,
++ },
++ {
++ .name = "usr2:red",
++ .gpio = 30,
++ .active_low = 1,
++ },
++ {
++ .name = "usr2:green",
++ .gpio = 29,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "sw2",
++ .gpio = 37,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
++ /* sw1 is connected to gpio34*/
+ };
+
+ static struct board_info __initdata board_DWVS0 = {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -56,7 +56,7 @@ struct board_info {
+ struct bcm63xx_dsp_platform_data dsp;
+
+ /* GPIO LEDs */
+- struct gpio_led leds[8];
++ struct gpio_led leds[14];
+
+ /* Buttons */
+ struct gpio_button buttons[2];
diff --git a/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch b/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch
new file mode 100644
index 0000000000..02354d573c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch
@@ -0,0 +1,246 @@
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -8,4 +8,10 @@ config BOARD_BCM963XX
+ select SSB
+ help
+
++config BOARD_LIVEBOX
++ bool "Inventel Livebox(es) boards"
++ select SSB
++ help
++ Inventel Livebox boards using the RedBoot bootloader.
++
+ endchoice
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o
+
+ EXTRA_CFLAGS += -Werror
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,223 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/gpio_buttons.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <board_bcm963xx.h>
++
++#define PFX "board_livebox: "
++
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox = {
++ .name = "Livebox",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++ &board_livebox
++#endif
++};
++
++/*
++ * early init callback
++ */
++void __init board_prom_init(void)
++{
++ u32 val;
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++
++ /* assume board is a Livebox */
++ memcpy(&board, bcm963xx_boards[0], sizeof(board));
++
++ /* setup pin multiplexing depending on board enabled device,
++ * this has to be done this early since PCI init is done
++ * inside arch_initcall */
++ val = 0;
++
++ if (board.has_pci) {
++ bcm63xx_pci_enabled = 1;
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G2_PCI;
++ }
++
++ if (board.has_pccard) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G1_MII_PCCARD;
++ }
++
++ if (board.has_enet0 && !board.enet0.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ if (board.has_enet1 && !board.enet1.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++ if (!board.name[0])
++ panic("unable to detect bcm963xx board");
++ printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++ /* make sure we're running on expected cpu */
++ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++ panic("unexpected CPU for bcm963xx board");
++}
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++ return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++
++static int board_get_mac_address(u8 *mac)
++{
++ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
++ u8 *p;
++ int count;
++
++ memcpy(mac, default_mac, ETH_ALEN);
++
++ p = mac + ETH_ALEN - 1;
++ count = mac_addr_used;
++
++ while (count--) {
++ do {
++ (*p)++;
++ if (*p != 0)
++ break;
++ p--;
++ } while (p != mac);
++ }
++
++ if (p == mac) {
++ printk(KERN_ERR PFX "unable to fetch mac address\n");
++ return -ENODEV;
++ }
++ mac_addr_used++;
++
++ return 0;
++}
++
++static struct resource mtd_resources[] = {
++ {
++ .start = 0, /* filled at runtime */
++ .end = 0, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device mtd_dev = {
++ .name = "bcm963xx-flash",
++ .resource = mtd_resources,
++ .num_resources = ARRAY_SIZE(mtd_resources),
++};
++
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++ u32 val;
++
++ if (board.has_pccard)
++ bcm63xx_pcmcia_register();
++
++ if (board.has_enet0 &&
++ !board_get_mac_address(board.enet0.mac_addr))
++ bcm63xx_enet_register(0, &board.enet0);
++
++ if (board.has_enet1 &&
++ !board_get_mac_address(board.enet1.mac_addr))
++ bcm63xx_enet_register(1, &board.enet1);
++
++ if (board.has_ohci0)
++ bcm63xx_ohci_register();
++
++ if (board.has_ehci0)
++ bcm63xx_ehci_register();
++
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++ mtd_resources[0].start = val;
++ mtd_resources[0].end = 0x1FFFFFFF;
++
++ platform_device_register(&mtd_dev);
++
++ return 0;
++}
++
diff --git a/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch
new file mode 100644
index 0000000000..57016d510c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch
@@ -0,0 +1,243 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -29,6 +29,7 @@
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_usb_udc.h>
+ #include <board_bcm963xx.h>
+
+ #define PFX "board_bcm963xx: "
+@@ -415,6 +416,8 @@ static struct board_info __initdata boar
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
++
++ .has_udc0 = 1,
+ };
+
+ static struct board_info __initdata board_rta1025w_16 = {
+@@ -913,6 +916,9 @@ void __init board_prom_init(void)
+
+ bcm_gpio_writel(val, GPIO_MODE_REG);
+
++ if (board.has_udc0)
++ bcm63xx_udc_register();
++
+ /* Generate MAC address for WLAN and
+ * register our SPROM */
+ #ifdef CONFIG_SSB_PCIHOST
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-udc.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++
++static struct resource udc_resources[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 udc_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_udc_device = {
++ .name = "bcm63xx-udc",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(udc_resources),
++ .resource = udc_resources,
++ .dev = {
++ .dma_mask = &udc_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++
++int __init bcm63xx_udc_register(void)
++{
++ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
++ return 0;
++
++ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
++ udc_resources[0].end = udc_resources[0].start;
++ udc_resources[0].end += RSET_UDC_SIZE - 1;
++ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
++ return platform_device_register(&bcm63xx_udc_device);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6338_UART1_BASE (0xdeadbeef)
+ #define BCM_6338_GPIO_BASE (0xfffe0400)
+ #define BCM_6338_SPI_BASE (0xfffe0c00)
+-#define BCM_6338_UDC0_BASE (0xdeadbeef)
++#define BCM_6338_UDC0_BASE (0xfffe3000)
+ #define BCM_6338_USBDMA_BASE (0xfffe2400)
+ #define BCM_6338_OHCI0_BASE (0xdeadbeef)
+ #define BCM_6338_OHCI_PRIV_BASE (0xfffe3000)
+@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_UART1_BASE (0xdeadbeef)
+ #define BCM_6345_GPIO_BASE (0xfffe0400)
+ #define BCM_6345_SPI_BASE (0xdeadbeef)
+-#define BCM_6345_UDC0_BASE (0xdeadbeef)
++#define BCM_6345_UDC0_BASE (0xfffe2100)
+ #define BCM_6345_USBDMA_BASE (0xfffe2800)
+ #define BCM_6345_ENET0_BASE (0xfffe1800)
+ #define BCM_6345_ENETDMA_BASE (0xfffe2800)
+@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_UART1_BASE (0xfffe0120)
+ #define BCM_6358_GPIO_BASE (0xfffe0080)
+ #define BCM_6358_SPI_BASE (0xdeadbeef)
+-#define BCM_6358_UDC0_BASE (0xfffe0800)
++#define BCM_6358_UDC0_BASE (0xfffe0400)
+ #define BCM_6358_OHCI0_BASE (0xfffe1400)
+ #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
+ #define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
+@@ -444,6 +444,7 @@ enum bcm63xx_irq {
+ IRQ_UART0,
+ IRQ_UART1,
+ IRQ_DSL,
++ IRQ_UDC0,
+ IRQ_ENET0,
+ IRQ_ENET1,
+ IRQ_ENET_PHY,
+@@ -486,7 +487,7 @@ enum bcm63xx_irq {
+ #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
+ #define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4)
+-#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5)
++#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5)
+ #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+ #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+ #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
+@@ -508,10 +509,17 @@ enum bcm63xx_irq {
+ #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+ #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
++#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6)
+ #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
+ #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
+ #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
+ #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
++#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14)
++#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15)
++#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16)
++#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17)
++#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18)
++#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19)
+ #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
+ #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21)
+ #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22)
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_UDC_H_
++#define BCM63XX_DEV_USB_UDC_H_
++
++int bcm63xx_udc_register(void);
++
++#endif /* BCM63XX_DEV_USB_UDC_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -47,6 +47,7 @@ struct board_info {
+ unsigned int has_dsp:1;
+ unsigned int has_uart0:1;
+ unsigned int has_uart1:1;
++ unsigned int has_udc0:1;
+
+ /* ethernet config */
+ struct bcm63xx_enet_platform_data enet0;
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+- dev-usb-ohci.o dev-usb-ehci.o
++ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+ obj-y += boards/
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
+ };
+
+ /*
++ * USB slave clock
++ */
++static void usbs_set(struct clk *clk, int enable)
++{
++ u32 mask;
++
++ switch(bcm63xx_get_cpu_id()) {
++ case BCM6338_CPU_ID:
++ mask = CKCTL_6338_USBS_EN;
++ break;
++ case BCM6348_CPU_ID:
++ mask = CKCTL_6348_USBS_EN;
++ break;
++ default:
++ return;
++ }
++ bcm_hwclock_set(mask, enable);
++}
++
++static struct clk clk_usbs = {
++ .set = usbs_set,
++};
++
++/*
+ * SPI clock
+ */
+ static void spi_set(struct clk *clk, int enable)
+@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
+ return &clk_ephy;
+ if (!strcmp(id, "usbh"))
+ return &clk_usbh;
++ if (!strcmp(id, "usbs"))
++ return &clk_usbs;
+ if (!strcmp(id, "spi"))
+ return &clk_spi;
+ if (!strcmp(id, "periph"))
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
++ select USB_ARCH_HAS_UDC
+
+ config BCM63XX_CPU_6345
+ bool "support 6345 CPU"
+@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
++ select USB_ARCH_HAS_UDC
+
+ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
diff --git a/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch
new file mode 100644
index 0000000000..ebff6d1ba9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1051,5 +1051,9 @@ int __init board_register_devices(void)
+ platform_device_register(&bcm63xx_gpio_buttons_device);
+ }
+
++ if (board.num_devs) {
++ platform_add_devices(board.devs, board.num_devs);
++ }
++
+ return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -61,6 +61,10 @@ struct board_info {
+
+ /* Buttons */
+ struct gpio_button buttons[2];
++
++ /* Additional platform devices */
++ struct platform_device **devs;
++ unsigned int num_devs;
+ };
+
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch b/target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch
new file mode 100644
index 0000000000..db88c16963
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch
@@ -0,0 +1,279 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -343,4 +343,12 @@ config GPIO_JANZ_TTL
+ This driver provides support for driving the pins in output
+ mode only. Input mode is not supported.
+
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC164
++ tristate "NXP 74HC164 Output expanders"
++ help
++ Platform driver for NXP 74HC164 8-output Expanders. This
++ provides a GPIO interface supporting outputs.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
+ obj-$(CONFIG_GPIO_MAX732X) += max732x.o
+ obj-$(CONFIG_GPIO_MC33880) += mc33880.o
+ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
++obj-$(CONFIG_GPIO_NXP_74HC164) += nxp_74hc164.o
+ obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
+ obj-$(CONFIG_GPIO_PL061) += pl061.o
+--- /dev/null
++++ b/drivers/gpio/nxp_74hc164.c
+@@ -0,0 +1,226 @@
++/*
++ * NXP 74HC164 - output expander GPIO driver
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Copy from nxp_74hc153.c code
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/gpio.h>
++#include <linux/bitops.h>
++#include <linux/platform_device.h>
++#include <linux/nxp_74hc164.h>
++
++#define NXP_74HC164_NUM_GPIOS 8
++
++struct nxp_74hc164_chip {
++ struct device *parent;
++ struct gpio_chip gpio_chip;
++ struct mutex lock;
++ long mask;
++};
++
++static void nxp_74hc164_set_value(struct gpio_chip *, unsigned, int);
++
++static struct nxp_74hc164_chip *gpio_to_nxp(struct gpio_chip *gc)
++{
++ return container_of(gc, struct nxp_74hc164_chip, gpio_chip);
++}
++
++static int nxp_74hc164_direction_input(struct gpio_chip *gc, unsigned offset)
++{
++ WARN_ON(1);
++ return -EINVAL;
++}
++
++static int nxp_74hc164_direction_output(struct gpio_chip *gc,
++ unsigned offset, int val)
++{
++ nxp_74hc164_set_value(gc, offset, val);
++ return 0;
++}
++
++static int nxp_74hc164_get_value(struct gpio_chip *gc, unsigned offset)
++{
++ struct nxp_74hc164_chip *nxp = gpio_to_nxp(gc);
++ int ret;
++
++ mutex_lock(&nxp->lock);
++ ret = test_bit(offset, &nxp->mask);
++ mutex_unlock(&nxp->lock);
++
++ return ret;
++}
++
++static void nxp_74hc164_set_value(struct gpio_chip *gc,
++ unsigned offset, int val)
++{
++ struct nxp_74hc164_chip *nxp;
++ struct nxp_74hc164_platform_data *pdata;
++ long mask;
++ int refresh;
++ int i;
++
++ nxp = gpio_to_nxp(gc);
++ pdata = nxp->parent->platform_data;
++
++ mutex_lock(&nxp->lock);
++ if (val)
++ refresh = (test_and_set_bit(offset, &nxp->mask) != val);
++ else
++ refresh = (test_and_clear_bit(offset, &nxp->mask) != val);
++
++ if (refresh) {
++ mask = nxp->mask;
++ for (i = 8; i > 0; --i, mask <<= 1) {
++ gpio_set_value(pdata->gpio_pin_data, mask & 0x80);
++ gpio_set_value(pdata->gpio_pin_clk, 1);
++ gpio_set_value(pdata->gpio_pin_clk, 0);
++ }
++ }
++ mutex_unlock(&nxp->lock);
++}
++
++static int __devinit nxp_74hc164_probe(struct platform_device *pdev)
++{
++ struct nxp_74hc164_platform_data *pdata;
++ struct nxp_74hc164_chip *nxp;
++ struct gpio_chip *gc;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (pdata == NULL) {
++ dev_dbg(&pdev->dev, "no platform data specified\n");
++ return -EINVAL;
++ }
++
++ nxp = kzalloc(sizeof(struct nxp_74hc164_chip), GFP_KERNEL);
++ if (nxp == NULL) {
++ dev_err(&pdev->dev, "no memory for private data\n");
++ return -ENOMEM;
++ }
++
++ err = gpio_request(pdata->gpio_pin_clk, dev_name(&pdev->dev));
++ if (err) {
++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++ pdata->gpio_pin_clk, err);
++ goto err_free_nxp;
++ }
++
++ err = gpio_request(pdata->gpio_pin_data, dev_name(&pdev->dev));
++ if (err) {
++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++ pdata->gpio_pin_data, err);
++ goto err_free_clk;
++ }
++
++ err = gpio_direction_output(pdata->gpio_pin_clk, 0);
++ if (err) {
++ dev_err(&pdev->dev,
++ "unable to set direction of gpio %u, err=%d\n",
++ pdata->gpio_pin_clk, err);
++ goto err_free_data;
++ }
++
++ err = gpio_direction_output(pdata->gpio_pin_data, 0);
++ if (err) {
++ dev_err(&pdev->dev,
++ "unable to set direction of gpio %u, err=%d\n",
++ pdata->gpio_pin_data, err);
++ goto err_free_data;
++ }
++
++ nxp->parent = &pdev->dev;
++ mutex_init(&nxp->lock);
++
++ gc = &nxp->gpio_chip;
++
++ gc->direction_input = nxp_74hc164_direction_input;
++ gc->direction_output = nxp_74hc164_direction_output;
++ gc->get = nxp_74hc164_get_value;
++ gc->set = nxp_74hc164_set_value;
++ gc->can_sleep = 1;
++
++ gc->base = pdata->gpio_base;
++ gc->ngpio = NXP_74HC164_NUM_GPIOS;
++ gc->label = dev_name(nxp->parent);
++ gc->dev = nxp->parent;
++ gc->owner = THIS_MODULE;
++
++ err = gpiochip_add(&nxp->gpio_chip);
++ if (err) {
++ dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
++ goto err_free_data;
++ }
++
++ platform_set_drvdata(pdev, nxp);
++ return 0;
++
++ err_free_data:
++ gpio_free(pdata->gpio_pin_data);
++ err_free_clk:
++ gpio_free(pdata->gpio_pin_clk);
++ err_free_nxp:
++ kfree(nxp);
++ return err;
++}
++
++static int nxp_74hc164_remove(struct platform_device *pdev)
++{
++ struct nxp_74hc164_chip *nxp = platform_get_drvdata(pdev);
++ struct nxp_74hc164_platform_data *pdata = pdev->dev.platform_data;
++
++ if (nxp) {
++ int err;
++
++ err = gpiochip_remove(&nxp->gpio_chip);
++ if (err) {
++ dev_err(&pdev->dev,
++ "unable to remove gpio chip, err=%d\n",
++ err);
++ return err;
++ }
++
++ gpio_free(pdata->gpio_pin_clk);
++ gpio_free(pdata->gpio_pin_data);
++
++ kfree(nxp);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static struct platform_driver nxp_74hc164_driver = {
++ .probe = nxp_74hc164_probe,
++ .remove = __devexit_p(nxp_74hc164_remove),
++ .driver = {
++ .name = NXP_74HC164_DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init nxp_74hc164_init(void)
++{
++ return platform_driver_register(&nxp_74hc164_driver);
++}
++subsys_initcall(nxp_74hc164_init);
++
++static void __exit nxp_74hc164_exit(void)
++{
++ platform_driver_unregister(&nxp_74hc164_driver);
++}
++module_exit(nxp_74hc164_exit);
++
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
++MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC164");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME);
+--- /dev/null
++++ b/include/linux/nxp_74hc164.h
+@@ -0,0 +1,22 @@
++/*
++ * NXP 74HC164 - Dual 4-input multiplexer defines
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _NXP_74HC164_H
++#define _NXP_74HC164_H
++
++#define NXP_74HC164_DRIVER_NAME "nxp-74hc164"
++
++struct nxp_74hc164_platform_data {
++ unsigned gpio_base;
++ unsigned gpio_pin_data;
++ unsigned gpio_pin_clk;
++};
++
++#endif /* _NXP_74HC164_H */
diff --git a/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch b/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch
new file mode 100644
index 0000000000..b1d022cfd0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch
@@ -0,0 +1,60 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -479,6 +479,49 @@ static struct board_info __initdata boar
+
+ .has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++ .name = "D-4P-W",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .leds = {
++ {
++ .name = "ppp",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ {
++ .name = "ppp-fail",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++
++ },
++ },
++
++};
++
+ #endif
+
+ /*
+@@ -737,6 +780,7 @@ static const struct board_info __initdat
+ &board_DV201AMR,
+ &board_96348gw_a,
+ &board_rta1025w_16,
++ &board_96348_D4PW,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch b/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch
new file mode 100644
index 0000000000..c2c93d20e6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch
@@ -0,0 +1,536 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -17,6 +17,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_buttons.h>
+ #include <linux/input.h>
++#include <linux/nxp_74hc164.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -34,6 +35,12 @@
+
+ #define PFX "board_bcm963xx: "
+
++#define NEUFBOX4_PID_OFFSET 0xff80
++#define NEUFBOX4_EXP_GPIO_BASE 64
++#define NEUFBOX4_GPIO_74HC164_DATA 7
++#define NEUFBOX4_GPIO_74HC164_CLK 6
++#define NXP_74HC64_GPIO(X) (NEUFBOX4_EXP_GPIO_BASE + (X))
++
+ static struct bcm963xx_nvram nvram;
+ static unsigned int mac_addr_used;
+ static struct board_info board;
+@@ -758,6 +765,471 @@ static struct board_info __initdata boar
+
+ .has_ohci0 = 1,
+ };
++
++static struct nxp_74hc164_platform_data neufbox4_74hc164_data = {
++ .gpio_base = NEUFBOX4_EXP_GPIO_BASE,
++ .gpio_pin_data = NEUFBOX4_GPIO_74HC164_DATA,
++ .gpio_pin_clk = NEUFBOX4_GPIO_74HC164_CLK,
++
++};
++
++static struct platform_device neufbox4_74hc164 = {
++ .name = NXP_74HC164_DRIVER_NAME,
++ .id = -1,
++ .dev = {
++ .platform_data = &neufbox4_74hc164_data,
++ }
++};
++
++static struct platform_device * __initdata neufbox4_devices[] = {
++ &neufbox4_74hc164,
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++ .name = "NB4-SER-r0",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "adsl",
++ .gpio = NXP_74HC64_GPIO(4),
++ .active_low = 1,
++ },
++ {
++ .name = "traffic",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "tel",
++ .gpio = NXP_74HC64_GPIO(3),
++ .active_low = 1,
++ },
++ {
++ .name = "tv",
++ .gpio = NXP_74HC64_GPIO(2),
++ .active_low = 1,
++ },
++ {
++ .name = "wifi",
++ .gpio = 15,
++ .active_low = 1,
++ },
++ {
++ .name = "alarm",
++ .gpio = NXP_74HC64_GPIO(0),
++ .active_low = 1,
++ },
++ {
++ .name = "service:red",
++ .gpio = 29,
++ .active_low = 1,
++ },
++ {
++ .name = "service:green",
++ .gpio = 30,
++ .active_low = 1,
++ },
++ {
++ .name = "service:blue",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 37,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++ .devs = neufbox4_devices,
++ .num_devs = ARRAY_SIZE(neufbox4_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r1 = {
++ .name = "NB4-SER-r1",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "adsl",
++ .gpio = NXP_74HC64_GPIO(4),
++ .active_low = 1,
++ },
++ {
++ .name = "traffic",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "tel",
++ .gpio = NXP_74HC64_GPIO(3),
++ .active_low = 1,
++ },
++ {
++ .name = "tv",
++ .gpio = NXP_74HC64_GPIO(2),
++ .active_low = 1,
++ },
++ {
++ .name = "wifi",
++ .gpio = 15,
++ .active_low = 1,
++ },
++ {
++ .name = "alarm",
++ .gpio = NXP_74HC64_GPIO(0),
++ .active_low = 1,
++ },
++ {
++ .name = "service:red",
++ .gpio = 29,
++ .active_low = 1,
++ },
++ {
++ .name = "service:green",
++ .gpio = 30,
++ .active_low = 1,
++ },
++ {
++ .name = "service:blue",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 37,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++ .devs = neufbox4_devices,
++ .num_devs = ARRAY_SIZE(neufbox4_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r2 = {
++ .name = "NB4-SER-r2",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++
++ .leds = {
++ {
++ .name = "adsl",
++ .gpio = NXP_74HC64_GPIO(4),
++ .active_low = 1,
++ },
++ {
++ .name = "traffic",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "tel",
++ .gpio = NXP_74HC64_GPIO(3),
++ .active_low = 1,
++ },
++ {
++ .name = "tv",
++ .gpio = NXP_74HC64_GPIO(2),
++ .active_low = 1,
++ },
++ {
++ .name = "wifi",
++ .gpio = 15,
++ .active_low = 1,
++ },
++ {
++ .name = "alarm",
++ .gpio = NXP_74HC64_GPIO(0),
++ .active_low = 1,
++ },
++ {
++ .name = "service:red",
++ .gpio = 29,
++ .active_low = 1,
++ },
++ {
++ .name = "service:green",
++ .gpio = 30,
++ .active_low = 1,
++ },
++ {
++ .name = "service:blue",
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 37,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++ .devs = neufbox4_devices,
++ .num_devs = ARRAY_SIZE(neufbox4_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++ .name = "NB4-FXC-r1",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "adsl",
++ .gpio = NXP_74HC64_GPIO(4),
++ .active_low = 1,
++ },
++ {
++ .name = "traffic",
++ .gpio = 2,
++ },
++ {
++ .name = "tel",
++ .gpio = NXP_74HC64_GPIO(3),
++ .active_low = 1,
++ },
++ {
++ .name = "tv",
++ .gpio = NXP_74HC64_GPIO(2),
++ .active_low = 1,
++ },
++ {
++ .name = "wifi",
++ .gpio = 15,
++ },
++ {
++ .name = "alarm",
++ .gpio = NXP_74HC64_GPIO(0),
++ .active_low = 1,
++ },
++ {
++ .name = "service:red",
++ .gpio = 29,
++ },
++ {
++ .name = "service:green",
++ .gpio = 30,
++ },
++ {
++ .name = "service:blue",
++ .gpio = 4,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 37,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++ .devs = neufbox4_devices,
++ .num_devs = ARRAY_SIZE(neufbox4_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r2 = {
++ .name = "NB4-FXC-r2",
++ .expected_cpu_id = 0x6358,
++
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++
++ .has_ohci0 = 1,
++ .has_pccard = 1,
++ .has_ehci0 = 1,
++
++ .leds = {
++ {
++ .name = "adsl",
++ .gpio = NXP_74HC64_GPIO(4),
++ .active_low = 1,
++ },
++ {
++ .name = "traffic",
++ .gpio = 2,
++ },
++ {
++ .name = "tel",
++ .gpio = NXP_74HC64_GPIO(3),
++ .active_low = 1,
++ },
++ {
++ .name = "tv",
++ .gpio = NXP_74HC64_GPIO(2),
++ .active_low = 1,
++ },
++ {
++ .name = "wifi",
++ .gpio = 15,
++ },
++ {
++ .name = "alarm",
++ .gpio = NXP_74HC64_GPIO(0),
++ .active_low = 1,
++ },
++ {
++ .name = "service:red",
++ .gpio = 29,
++ },
++ {
++ .name = "service:green",
++ .gpio = 30,
++ },
++ {
++ .name = "service:blue",
++ .gpio = 4,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 37,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++ .devs = neufbox4_devices,
++ .num_devs = ARRAY_SIZE(neufbox4_devices),
++};
+ #endif
+
+ /*
+@@ -788,9 +1260,30 @@ static const struct board_info __initdat
+ &board_96358vw2,
+ &board_AGPFS0,
+ &board_DWVS0,
++ &board_nb4_ser_r0,
++ &board_nb4_ser_r1,
++ &board_nb4_ser_r2,
++ &board_nb4_fxc_r1,
++ &board_nb4_fxc_r2,
+ #endif
+ };
+
++static void __init neufbox4_nvram_fixup(void)
++{
++ u8 *boot_addr, *p;
++ u32 val;
++
++ if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++ boot_addr = (u8 *)KSEG1ADDR(val);
++ /* Extract neufbox4 PID */
++ p = boot_addr + NEUFBOX4_PID_OFFSET;
++ if (!memcmp(p, "NB4-", 4))
++ memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
++ }
++}
++
+ /*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+@@ -908,6 +1401,9 @@ void __init board_prom_init(void)
+ return;
+ }
+
++ /* Fixup broken neufbox4 board name */
++ neufbox4_nvram_fixup();
++
+ /* find board by name */
+ for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+ if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch
new file mode 100644
index 0000000000..79e7ac6305
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch
@@ -0,0 +1,956 @@
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -56,6 +56,7 @@ static const unsigned long bcm96338_regs
+
+ static const int bcm96338_irqs[] = {
+ [IRQ_TIMER] = BCM_6338_TIMER_IRQ,
++ [IRQ_SPI] = BCM_6338_SPI_IRQ,
+ [IRQ_UART0] = BCM_6338_UART0_IRQ,
+ [IRQ_DSL] = BCM_6338_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6338_ENET0_IRQ,
+@@ -130,6 +131,7 @@ static const unsigned long bcm96348_regs
+
+ static const int bcm96348_irqs[] = {
+ [IRQ_TIMER] = BCM_6348_TIMER_IRQ,
++ [IRQ_SPI] = BCM_6348_SPI_IRQ,
+ [IRQ_UART0] = BCM_6348_UART0_IRQ,
+ [IRQ_DSL] = BCM_6348_DSL_IRQ,
+ [IRQ_ENET0] = BCM_6348_ENET0_IRQ,
+@@ -173,6 +175,7 @@ static const unsigned long bcm96358_regs
+
+ static const int bcm96358_irqs[] = {
+ [IRQ_TIMER] = BCM_6358_TIMER_IRQ,
++ [IRQ_SPI] = BCM_6358_SPI_IRQ,
+ [IRQ_UART0] = BCM_6358_UART0_IRQ,
+ [IRQ_UART1] = BCM_6358_UART1_IRQ,
+ [IRQ_DSL] = BCM_6358_DSL_IRQ,
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -0,0 +1,60 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_spi.h>
++#include <bcm63xx_regs.h>
++
++static struct resource spi_resources[] = {
++ {
++ .start = -1, /* filled at runtime */
++ .end = -1, /* filled at runtime */
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = -1, /* filled at runtime */
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct bcm63xx_spi_pdata spi_pdata = {
++ .bus_num = 0,
++ .num_chipselect = 4,
++ .speed_hz = 50000000, /* Fclk */
++};
++
++static struct platform_device bcm63xx_spi_device = {
++ .name = "bcm63xx-spi",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(spi_resources),
++ .resource = spi_resources,
++ .dev = {
++ .platform_data = &spi_pdata,
++ },
++};
++
++int __init bcm63xx_spi_register(void)
++{
++ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
++ spi_resources[0].end = spi_resources[0].start;
++ spi_resources[0].end += RSET_SPI_SIZE - 1;
++ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
++
++ /* Fill in platform data */
++ if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
++ spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE;
++
++ if (BCMCPU_IS_6358())
++ spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE;
++
++ return platform_device_register(&bcm63xx_spi_device);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -109,6 +109,7 @@ enum bcm63xx_regs_set {
+ #define RSET_WDT_SIZE 12
+ #define RSET_ENET_SIZE 2048
+ #define RSET_ENETDMA_SIZE 2048
++#define RSET_SPI_SIZE 256
+ #define RSET_UART_SIZE 24
+ #define RSET_UDC_SIZE 256
+ #define RSET_OHCI_SIZE 256
+@@ -214,7 +215,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_UART0_BASE (0xfffe0100)
+ #define BCM_6358_UART1_BASE (0xfffe0120)
+ #define BCM_6358_GPIO_BASE (0xfffe0080)
+-#define BCM_6358_SPI_BASE (0xdeadbeef)
++#define BCM_6358_SPI_BASE (0xfffe0800)
+ #define BCM_6358_UDC0_BASE (0xfffe0400)
+ #define BCM_6358_OHCI0_BASE (0xfffe1400)
+ #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
+@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs
+ */
+ enum bcm63xx_irq {
+ IRQ_TIMER = 0,
++ IRQ_SPI,
+ IRQ_UART0,
+ IRQ_UART1,
+ IRQ_DSL,
+@@ -507,6 +509,7 @@ enum bcm63xx_irq {
+ * 6348 irqs
+ */
+ #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
++#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
+ #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
+ #define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6)
+@@ -531,6 +534,7 @@ enum bcm63xx_irq {
+ * 6358 irqs
+ */
+ #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
++#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
+ #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
+ #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -769,4 +769,116 @@
+ #define DMIPSPLLCFG_N2_SHIFT 29
+ #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT)
+
++/*************************************************************************
++ * _REG relative to RSET_SPI
++ *************************************************************************/
++
++/* BCM 6338 SPI core */
++#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */
++#define SPI_BCM_6338_SPI_INT_STATUS 0x02
++#define SPI_BCM_6338_SPI_MASK_INT_ST 0x03
++#define SPI_BCM_6338_SPI_INT_MASK 0x04
++#define SPI_BCM_6338_SPI_ST 0x05
++#define SPI_BCM_6338_SPI_CLK_CFG 0x06
++#define SPI_BCM_6338_SPI_FILL_BYTE 0x07
++#define SPI_BCM_6338_SPI_MSG_TAIL 0x09
++#define SPI_BCM_6338_SPI_RX_TAIL 0x0b
++#define SPI_BCM_6338_SPI_MSG_CTL 0x40
++#define SPI_BCM_6338_SPI_MSG_DATA 0x41
++#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f
++#define SPI_BCM_6338_SPI_RX_DATA 0x80
++#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f
++
++/* BCM 6348 SPI core */
++#define SPI_BCM_6348_SPI_MASK_INT_ST 0x00
++#define SPI_BCM_6348_SPI_INT_STATUS 0x01
++#define SPI_BCM_6348_SPI_CMD 0x02 /* 16-bits register */
++#define SPI_BCM_6348_SPI_FILL_BYTE 0x04
++#define SPI_BCM_6348_SPI_CLK_CFG 0x05
++#define SPI_BCM_6348_SPI_ST 0x06
++#define SPI_BCM_6348_SPI_INT_MASK 0x07
++#define SPI_BCM_6348_SPI_RX_TAIL 0x08
++#define SPI_BCM_6348_SPI_MSG_TAIL 0x10
++#define SPI_BCM_6348_SPI_MSG_DATA 0x40
++#define SPI_BCM_6348_SPI_MSG_CTL 0x42
++#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f
++#define SPI_BCM_6348_SPI_RX_DATA 0x80
++#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f
++
++/* BCM 6358 SPI core */
++#define SPI_BCM_6358_MSG_CTL 0x00 /* 16-bits register */
++
++#define SPI_BCM_6358_SPI_MSG_DATA 0x02
++#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e
++
++#define SPI_BCM_6358_SPI_RX_DATA 0x400
++#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220
++
++#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */
++
++#define SPI_BCM_6358_SPI_INT_STATUS 0x702
++#define SPI_BCM_6358_SPI_MASK_INT_ST 0x703
++
++#define SPI_BCM_6358_SPI_INT_MASK 0x704
++
++#define SPI_BCM_6358_SPI_STATUS 0x705
++
++#define SPI_BCM_6358_SPI_CLK_CFG 0x706
++
++#define SPI_BCM_6358_SPI_FILL_BYTE 0x707
++#define SPI_BCM_6358_SPI_MSG_TAIL 0x709
++#define SPI_BCM_6358_SPI_RX_TAIL 0x70B
++
++/* Shared SPI definitions */
++
++/* Message configuration */
++#define SPI_FD_RW 0x00
++#define SPI_HD_W 0x01
++#define SPI_HD_R 0x02
++#define SPI_BYTE_CNT_SHIFT 0
++#define SPI_MSG_TYPE_SHIFT 14
++
++/* Command */
++#define SPI_CMD_NOOP 0x01
++#define SPI_CMD_SOFT_RESET 0x02
++#define SPI_CMD_HARD_RESET 0x04
++#define SPI_CMD_START_IMMEDIATE 0x08
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_COMMAND_MASK 0x000f
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++#define SPI_CMD_ONE_BYTE_SHIFT 11
++#define SPI_CMD_ONE_WIRE_SHIFT 12
++#define SPI_DEV_ID_0 0
++#define SPI_DEV_ID_1 1
++#define SPI_DEV_ID_2 2
++#define SPI_DEV_ID_3 3
++
++/* Interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_RX_OVERFLOW 0x02
++#define SPI_INTR_TX_UNDERFLOW 0x04
++#define SPI_INTR_TX_OVERFLOW 0x08
++#define SPI_INTR_RX_UNDERFLOW 0x10
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++/* Status */
++#define SPI_RX_EMPTY 0x02
++#define SPI_CMD_BUSY 0x04
++#define SPI_SERIAL_BUSY 0x08
++
++/* Clock configuration */
++#define SPI_CLK_20MHZ 0x00
++#define SPI_CLK_0_391MHZ 0x01
++#define SPI_CLK_0_781MHZ 0x02 /* default */
++#define SPI_CLK_1_563MHZ 0x03
++#define SPI_CLK_3_125MHZ 0x04
++#define SPI_CLK_6_250MHZ 0x05
++#define SPI_CLK_12_50MHZ 0x06
++#define SPI_CLK_25MHZ 0x07
++#define SPI_CLK_MASK 0x07
++#define SPI_SSOFFTIME_MASK 0x38
++#define SPI_SSOFFTIME_SHIFT 3
++#define SPI_BYTE_SWAP 0x80
++
+ #endif /* BCM63XX_REGS_H_ */
+--- /dev/null
++++ b/drivers/spi/bcm63xx_spi.c
+@@ -0,0 +1,628 @@
++/*
++ * Broadcom BCM63xx SPI controller support
++ *
++ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/gpio.h>
++#include <linux/completion.h>
++#include <linux/err.h>
++
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_dev_spi.h>
++
++#define PFX KBUILD_MODNAME
++#define DRV_VER "0.1.2"
++
++enum bcm63xx_regs_spi {
++ SPI_CMD,
++ SPI_INT_STATUS,
++ SPI_INT_MASK_ST,
++ SPI_INT_MASK,
++ SPI_ST,
++ SPI_CLK_CFG,
++ SPI_FILL_BYTE,
++ SPI_MSG_TAIL,
++ SPI_RX_TAIL,
++ SPI_MSG_CTL,
++ SPI_MSG_DATA,
++ SPI_RX_DATA,
++};
++
++/*
++ * register offsets
++ */
++static const unsigned long bcm96338_regs_spi[] = {
++ [SPI_CMD] = SPI_BCM_6338_SPI_CMD,
++ [SPI_INT_STATUS] = SPI_BCM_6338_SPI_INT_STATUS,
++ [SPI_INT_MASK_ST] = SPI_BCM_6338_SPI_MASK_INT_ST,
++ [SPI_INT_MASK] = SPI_BCM_6338_SPI_INT_MASK,
++ [SPI_ST] = SPI_BCM_6338_SPI_ST,
++ [SPI_CLK_CFG] = SPI_BCM_6338_SPI_CLK_CFG,
++ [SPI_FILL_BYTE] = SPI_BCM_6338_SPI_FILL_BYTE,
++ [SPI_MSG_TAIL] = SPI_BCM_6338_SPI_MSG_TAIL,
++ [SPI_RX_TAIL] = SPI_BCM_6338_SPI_RX_TAIL,
++ [SPI_MSG_CTL] = SPI_BCM_6338_SPI_MSG_CTL,
++ [SPI_MSG_DATA] = SPI_BCM_6338_SPI_MSG_DATA,
++ [SPI_RX_DATA] = SPI_BCM_6338_SPI_RX_DATA,
++};
++
++static const unsigned long bcm96348_regs_spi[] = {
++ [SPI_CMD] = SPI_BCM_6348_SPI_CMD,
++ [SPI_INT_STATUS] = SPI_BCM_6348_SPI_INT_STATUS,
++ [SPI_INT_MASK_ST] = SPI_BCM_6348_SPI_MASK_INT_ST,
++ [SPI_INT_MASK] = SPI_BCM_6348_SPI_INT_MASK,
++ [SPI_ST] = SPI_BCM_6348_SPI_ST,
++ [SPI_CLK_CFG] = SPI_BCM_6348_SPI_CLK_CFG,
++ [SPI_FILL_BYTE] = SPI_BCM_6348_SPI_FILL_BYTE,
++ [SPI_MSG_TAIL] = SPI_BCM_6348_SPI_MSG_TAIL,
++ [SPI_RX_TAIL] = SPI_BCM_6348_SPI_RX_TAIL,
++ [SPI_MSG_CTL] = SPI_BCM_6348_SPI_MSG_CTL,
++ [SPI_MSG_DATA] = SPI_BCM_6348_SPI_MSG_DATA,
++ [SPI_RX_DATA] = SPI_BCM_6348_SPI_RX_DATA,
++};
++
++static const unsigned long bcm96358_regs_spi[] = {
++ [SPI_CMD] = SPI_BCM_6358_SPI_CMD,
++ [SPI_INT_STATUS] = SPI_BCM_6358_SPI_INT_STATUS,
++ [SPI_INT_MASK_ST] = SPI_BCM_6358_SPI_MASK_INT_ST,
++ [SPI_INT_MASK] = SPI_BCM_6358_SPI_INT_MASK,
++ [SPI_ST] = SPI_BCM_6358_SPI_STATUS,
++ [SPI_CLK_CFG] = SPI_BCM_6358_SPI_CLK_CFG,
++ [SPI_FILL_BYTE] = SPI_BCM_6358_SPI_FILL_BYTE,
++ [SPI_MSG_TAIL] = SPI_BCM_6358_SPI_MSG_TAIL,
++ [SPI_RX_TAIL] = SPI_BCM_6358_SPI_RX_TAIL,
++ [SPI_MSG_CTL] = SPI_BCM_6358_MSG_CTL,
++ [SPI_MSG_DATA] = SPI_BCM_6358_SPI_MSG_DATA,
++ [SPI_RX_DATA] = SPI_BCM_6358_SPI_RX_DATA,
++};
++
++
++#ifdef BCMCPU_RUNTIME_DETECT
++static const unsigned long *bcm63xx_regs_spi;
++
++static __init void bcm63xx_spi_regs_init(void)
++{
++ if (BCMCPU_IS_6338())
++ bcm63xx_regs_spi = bcm96338_regs_spi;
++ if (BCMCPU_IS_6348())
++ bcm63xx_regs_spi = bcm96348_regs_spi;
++ if (BCMCPU_IS_6358())
++ bcm63xx_regs_spi = bcm96358_regs_spi;
++}
++#else
++static __init void bcm63xx_spi_regs_init(void) { }
++#endif
++
++static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
++{
++#ifdef BCMCPU_RUNTIME_DETECT
++ return bcm63xx_regs_spi[reg];
++#else
++#ifdef CONFIG_BCM63XX_CPU_6338
++switch (reg) {
++ case SPI_CMD:
++ return SPI_BCM_6338_SPI_CMD;
++ case SPI_INT_STATUS:
++ return SPI_BCM_6338_SPI_INT_STATUS;
++ case SPI_INT_MASK_ST:
++ return SPI_BCM_6338_SPI_MASK_INT_ST;
++ case SPI_INT_MASK:
++ return SPI_BCM_6338_SPI_INT_MASK;
++ case SPI_ST:
++ return SPI_BCM_6338_SPI_ST;
++ case SPI_CLK_CFG:
++ return SPI_BCM_6338_SPI_CLK_CFG;
++ case SPI_FILL_BYTE:
++ return SPI_BCM_6338_SPI_FILL_BYTE;
++ case SPI_MSG_TAIL:
++ return SPI_BCM_6338_SPI_MSG_TAIL;
++ case SPI_RX_TAIL:
++ return SPI_BCM_6338_SPI_RX_TAIL;
++ case SPI_MSG_CTL:
++ return SPI_BCM_6338_SPI_MSG_CTL;
++ case SPI_MSG_DATA:
++ return SPI_BCM_6338_SPI_MSG_DATA;
++ case SPI_RX_DATA:
++ return SPI_BCM_6338_SPI_RX_DATA;
++}
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6348
++switch (reg) {
++ case SPI_CMD:
++ return SPI_BCM_6348_SPI_CMD;
++ case SPI_INT_MASK_ST:
++ return SPI_BCM_6348_SPI_MASK_INT_ST;
++ case SPI_INT_MASK:
++ return SPI_BCM_6348_SPI_INT_MASK;
++ case SPI_INT_STATUS:
++ return SPI_BCM_6348_SPI_INT_STATUS;
++ case SPI_ST:
++ return SPI_BCM_6348_SPI_ST;
++ case SPI_CLK_CFG:
++ return SPI_BCM_6348_SPI_CLK_CFG;
++ case SPI_FILL_BYTE:
++ return SPI_BCM_6348_SPI_FILL_BYTE;
++ case SPI_MSG_TAIL:
++ return SPI_BCM_6348_SPI_MSG_TAIL;
++ case SPI_RX_TAIL:
++ return SPI_BCM_6348_SPI_RX_TAIL;
++ case SPI_MSG_CTL:
++ return SPI_BCM_6348_SPI_MSG_CTL;
++ case SPI_MSG_DATA:
++ return SPI_BCM_6348_SPI_MSG_DATA;
++ case SPI_RX_DATA:
++ return SPI_BCM_6348_SPI_RX_DATA;
++}
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6358
++switch (reg) {
++ case SPI_CMD:
++ return SPI_BCM_6358_SPI_CMD;
++ case SPI_INT_STATUS:
++ return SPI_BCM_6358_SPI_INT_STATUS;
++ case SPI_INT_MASK_ST:
++ return SPI_BCM_6358_SPI_MASK_INT_ST;
++ case SPI_INT_MASK:
++ return SPI_BCM_6358_SPI_INT_MASK;
++ case SPI_ST:
++ return SPI_BCM_6358_SPI_STATUS;
++ case SPI_CLK_CFG:
++ return SPI_BCM_6358_SPI_CLK_CFG;
++ case SPI_FILL_BYTE:
++ return SPI_BCM_6358_SPI_FILL_BYTE;
++ case SPI_MSG_TAIL:
++ return SPI_BCM_6358_SPI_MSG_TAIL;
++ case SPI_RX_TAIL:
++ return SPI_BCM_6358_SPI_RX_TAIL;
++ case SPI_MSG_CTL:
++ return SPI_BCM_6358_MSG_CTL;
++ case SPI_MSG_DATA:
++ return SPI_BCM_6358_SPI_MSG_DATA;
++ case SPI_RX_DATA:
++ return SPI_BCM_6358_SPI_RX_DATA;
++}
++#endif
++#endif
++ return 0;
++}
++
++/*
++ * helpers for the SPI register sets
++ */
++#define bcm_spi_readb(b,o) bcm_readb((b) + bcm63xx_spireg(o))
++#define bcm_spi_readw(b,o) bcm_readw((b) + bcm63xx_spireg(o))
++#define bcm_spi_writeb(v,b,o) bcm_writeb((v), (b) + bcm63xx_spireg(o))
++#define bcm_spi_writew(v,b,o) bcm_writew((v), (b) + bcm63xx_spireg(o))
++
++struct bcm63xx_spi {
++ /* bitbang has to be first */
++ struct spi_bitbang bitbang;
++ struct completion done;
++
++ void __iomem *regs;
++ int irq;
++
++ /* Platform data */
++ u32 speed_hz;
++ unsigned fifo_size;
++
++ /* Data buffers */
++ const unsigned char *tx_ptr;
++ unsigned char *rx_ptr;
++ int remaining_bytes;
++
++ struct clk *clk;
++ struct resource *ioarea;
++ struct platform_device *pdev;
++};
++
++static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on)
++{
++ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++ u16 val;
++
++ val = bcm_spi_readw(bs->regs, SPI_CMD);
++ if (is_on == BITBANG_CS_INACTIVE)
++ val |= SPI_CMD_NOOP;
++ else if (is_on == BITBANG_CS_ACTIVE)
++ val |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
++
++ bcm_spi_writew(val, bs->regs, SPI_CMD);
++}
++
++static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ u8 bits_per_word;
++ u8 clk_cfg;
++ u32 hz;
++ unsigned int div;
++
++ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++
++ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
++ hz = (t) ? t->speed_hz : spi->max_speed_hz;
++ if (bits_per_word != 8) {
++ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
++ __func__, bits_per_word);
++ return -EINVAL;
++ }
++
++ if (spi->chip_select > spi->master->num_chipselect) {
++ dev_err(&spi->dev, "%s, unsupported slave %d\n",
++ __func__, spi->chip_select);
++ return -EINVAL;
++ }
++
++ /* Check clock setting */
++ div = (bs->speed_hz / hz);
++ switch (div) {
++ case 2:
++ clk_cfg = SPI_CLK_25MHZ;
++ break;
++ case 4:
++ clk_cfg = SPI_CLK_12_50MHZ;
++ break;
++ case 8:
++ clk_cfg = SPI_CLK_6_250MHZ;
++ break;
++ case 16:
++ clk_cfg = SPI_CLK_3_125MHZ;
++ break;
++ case 32:
++ clk_cfg = SPI_CLK_1_563MHZ;
++ break;
++ case 128:
++ clk_cfg = SPI_CLK_0_781MHZ;
++ break;
++ case 64:
++ default:
++ /* Set to slowest mode for compatibility */
++ clk_cfg = SPI_CLK_0_781MHZ;
++ break;
++ }
++
++ bcm_spi_writeb(clk_cfg, bs->regs, SPI_CLK_CFG);
++ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
++ div, hz, clk_cfg);
++
++ return 0;
++}
++
++/* the spi->mode bits understood by this driver: */
++#define MODEBITS (SPI_CPOL | SPI_CPHA)
++
++static int bcm63xx_spi_setup(struct spi_device *spi)
++{
++ struct spi_bitbang *bitbang;
++ struct bcm63xx_spi *bs;
++ int retval;
++
++ bs = spi_master_get_devdata(spi->master);
++ bitbang = &bs->bitbang;
++
++ if (!spi->bits_per_word)
++ spi->bits_per_word = 8;
++
++ if (spi->mode & ~MODEBITS) {
++ dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
++ __func__, spi->mode & ~MODEBITS);
++ return -EINVAL;
++ }
++
++ retval = bcm63xx_spi_setup_transfer(spi, NULL);
++ if (retval < 0) {
++ dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
++ spi->mode & ~MODEBITS);
++ return retval;
++ }
++
++ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
++ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
++
++ return 0;
++}
++
++/* Fill the TX FIFO with as many bytes as possible */
++static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
++{
++ u8 tail;
++
++ /* Fill the Tx FIFO with as many bytes as possible */
++ tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
++ while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) {
++ if (bs->tx_ptr)
++ bcm_spi_writeb(*bs->tx_ptr++, bs->regs, SPI_MSG_DATA);
++ else
++ bcm_spi_writeb(0, bs->regs, SPI_MSG_DATA);
++ bs->remaining_bytes--;
++ tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
++ }
++}
++
++static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++ u8 msg_ctl;
++ u16 cmd;
++
++ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
++ t->tx_buf, t->rx_buf, t->len);
++
++ /* Transmitter is inhibited */
++ bs->tx_ptr = t->tx_buf;
++ bs->rx_ptr = t->rx_buf;
++ bs->remaining_bytes = t->len;
++ init_completion(&bs->done);
++
++ bcm63xx_spi_fill_tx_fifo(bs);
++
++ /* Enable the command done interrupt which
++ * we use to determine completion of a command */
++ bcm_spi_writeb(SPI_INTR_CMD_DONE, bs->regs, SPI_INT_MASK);
++
++ /* Fill in the Message control register */
++ msg_ctl = bcm_spi_readb(bs->regs, SPI_MSG_CTL);
++ msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT);
++ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
++ bcm_spi_writeb(msg_ctl, bs->regs, SPI_MSG_CTL);
++
++ /* Issue the transfer */
++ cmd = bcm_spi_readw(bs->regs, SPI_CMD);
++ cmd |= SPI_CMD_START_IMMEDIATE;
++ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
++ bcm_spi_writew(cmd, bs->regs, SPI_CMD);
++
++ wait_for_completion(&bs->done);
++
++ /* Disable the CMD_DONE interrupt */
++ bcm_spi_writeb(~(SPI_INTR_CMD_DONE), bs->regs, SPI_INT_MASK);
++
++ return t->len - bs->remaining_bytes;
++}
++
++/* This driver supports single master mode only. Hence
++ * CMD_DONE is the only interrupt we care about
++ */
++static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
++{
++ struct spi_master *master = (struct spi_master *)dev_id;
++ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++ u8 intr;
++ u16 cmd;
++
++ /* Read interupts and clear them immediately */
++ intr = bcm_spi_readb(bs->regs, SPI_INT_STATUS);
++ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK);
++
++ /* A tansfer completed */
++ if (intr & SPI_INTR_CMD_DONE) {
++ u8 rx_empty;
++
++ rx_empty = bcm_spi_readb(bs->regs, SPI_ST);
++ /* Read out all the data */
++ while ((rx_empty & SPI_RX_EMPTY) == 0) {
++ u8 data;
++
++ data = bcm_spi_readb(bs->regs, SPI_RX_DATA);
++ if (bs->rx_ptr)
++ *bs->rx_ptr++ = data;
++
++ rx_empty = bcm_spi_readb(bs->regs, SPI_RX_EMPTY);
++ }
++
++ /* See if there is more data to send */
++ if (bs->remaining_bytes > 0) {
++ bcm63xx_spi_fill_tx_fifo(bs);
++
++ /* Start the transfer */
++ cmd = bcm_spi_readw(bs->regs, SPI_CMD);
++ cmd |= SPI_CMD_START_IMMEDIATE;
++ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
++ bcm_spi_writew(cmd, bs->regs, SPI_CMD);
++ } else
++ complete(&bs->done);
++ }
++
++ return IRQ_HANDLED;
++}
++
++
++static int __init bcm63xx_spi_probe(struct platform_device *pdev)
++{
++ struct resource *r;
++ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
++ int irq;
++ struct spi_master *master;
++ struct clk *clk;
++ struct bcm63xx_spi *bs;
++ int ret;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!r) {
++ ret = -ENXIO;
++ goto out;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ ret = -ENXIO;
++ goto out;
++ }
++
++ bcm63xx_spi_regs_init();
++
++ clk = clk_get(&pdev->dev, "spi");
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "No clock for device\n");
++ ret = -ENODEV;
++ goto out;
++ }
++
++ master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi));
++ if (!master) {
++ ret = -ENOMEM;
++ goto out_free;
++ }
++
++ bs = spi_master_get_devdata(master);
++ bs->bitbang.master = spi_master_get(master);
++ bs->bitbang.chipselect = bcm63xx_spi_chipselect;
++ bs->bitbang.setup_transfer = bcm63xx_spi_setup_transfer;
++ bs->bitbang.txrx_bufs = bcm63xx_txrx_bufs;
++ bs->bitbang.master->setup = bcm63xx_spi_setup;
++ init_completion(&bs->done);
++
++ platform_set_drvdata(pdev, master);
++ bs->pdev = pdev;
++
++ if (!request_mem_region(r->start,
++ r->end - r->start, PFX)) {
++ ret = -ENXIO;
++ goto out_free;
++ }
++
++ bs->regs = ioremap_nocache(r->start, r->end - r->start);
++ if (!bs->regs) {
++ printk(KERN_ERR PFX " unable to ioremap regs\n");
++ ret = -ENOMEM;
++ goto out_free;
++ }
++ bs->irq = irq;
++ bs->clk = clk;
++ bs->fifo_size = pdata->fifo_size;
++
++ ret = request_irq(irq, bcm63xx_spi_interrupt, 0,
++ pdev->name, master);
++ if (ret) {
++ printk(KERN_ERR PFX " unable to request irq\n");
++ goto out_unmap;
++ }
++
++ master->bus_num = pdata->bus_num;
++ master->num_chipselect = pdata->num_chipselect;
++ bs->speed_hz = pdata->speed_hz;
++
++ /* Initialize hardware */
++ clk_enable(bs->clk);
++ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK);
++
++ dev_info(&pdev->dev, " at 0x%08x (irq %d, FIFOs size %d) v%s\n",
++ r->start, irq, bs->fifo_size, DRV_VER);
++
++ ret = spi_bitbang_start(&bs->bitbang);
++ if (ret) {
++ dev_err(&pdev->dev, "spi_bitbang_start FAILED\n");
++ goto out_reset_hw;
++ }
++
++ return ret;
++
++out_reset_hw:
++ clk_disable(clk);
++ free_irq(irq, master);
++out_unmap:
++ iounmap(bs->regs);
++out_free:
++ clk_put(clk);
++ spi_master_put(master);
++out:
++ return ret;
++}
++
++static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master = platform_get_drvdata(pdev);
++ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++
++ spi_bitbang_stop(&bs->bitbang);
++ clk_disable(bs->clk);
++ clk_put(bs->clk);
++ free_irq(bs->irq, master);
++ iounmap(bs->regs);
++ platform_set_drvdata(pdev, 0);
++ spi_master_put(bs->bitbang.master);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++ struct spi_master *master = platform_get_drvdata(pdev);
++ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++
++ clk_disable(bs->clk);
++
++ return 0;
++}
++
++static int bcm63xx_spi_resume(struct platform_device *pdev)
++{
++ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++
++ clk_enable(bs->clk);
++
++ return 0;
++}
++#else
++#define bcm63xx_spi_suspend NULL
++#define bcm63xx_spi_resume NULL
++#endif
++
++static struct platform_driver bcm63xx_spi_driver = {
++ .driver = {
++ .name = "bcm63xx-spi",
++ .owner = THIS_MODULE,
++ },
++ .probe = bcm63xx_spi_probe,
++ .remove = bcm63xx_spi_remove,
++ .suspend = bcm63xx_spi_suspend,
++ .resume = bcm63xx_spi_resume,
++};
++
++
++static int __init bcm63xx_spi_init(void)
++{
++ return platform_driver_register(&bcm63xx_spi_driver);
++}
++
++static void __exit bcm63xx_spi_exit(void)
++{
++ platform_driver_unregister(&bcm63xx_spi_driver);
++}
++
++module_init(bcm63xx_spi_init);
++module_exit(bcm63xx_spi_exit);
++
++MODULE_ALIAS("platform:bcm63xx_spi");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VER);
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -60,6 +60,13 @@ config SPI_ATMEL
+ This selects a driver for the Atmel SPI Controller, present on
+ many AT32 (AVR32) and AT91 (ARM) chips.
+
++config SPI_BCM63XX
++ tristate "Broadcom BCM63xx SPI controller"
++ depends on BCM63XX
++ select SPI_BITBANG
++ help
++ This is the SPI controller master driver for Broadcom BCM63xx SoC.
++
+ config SPI_BFIN
+ tristate "SPI controller driver for ADI Blackfin5xx"
+ depends on BLACKFIN
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
+ obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
+ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+ obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
++obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o
+
+ # special build for s3c24xx spi driver with fiq support
+ spi_s3c24xx_hw-y := spi_s3c24xx.o
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -0,0 +1,15 @@
++#ifndef BCM63XX_DEV_SPI_H
++#define BCM63XX_DEV_SPI_H
++
++#include <linux/types.h>
++
++int __init bcm63xx_spi_register(void);
++
++struct bcm63xx_spi_pdata {
++ unsigned int fifo_size;
++ int bus_num;
++ int num_chipselect;
++ u32 speed_hz;
++};
++
++#endif /* BCM63XX_DEV_SPI_H */
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+- dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
++ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+ obj-y += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -31,6 +31,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_udc.h>
++#include <bcm63xx_dev_spi.h>
+ #include <board_bcm963xx.h>
+
+ #define PFX "board_bcm963xx: "
+@@ -1459,6 +1460,9 @@ void __init board_prom_init(void)
+ if (board.has_udc0)
+ bcm63xx_udc_register();
+
++ if (!BCMCPU_IS_6345())
++ bcm63xx_spi_register();
++
+ /* Generate MAC address for WLAN and
+ * register our SPROM */
+ #ifdef CONFIG_SSB_PCIHOST
diff --git a/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch
new file mode 100644
index 0000000000..07b97311f0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1453,6 +1453,8 @@ void __init board_prom_init(void)
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G3_EXT_MII |
+ GPIO_MODE_6348_G0_EXT_MII;
++ else if (BCMCPU_IS_6358())
++ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+ }
+
+ bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -402,6 +402,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED (1 << 10)
+ #define GPIO_MODE_6358_UTOPIA (1 << 12)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
+
+
+ /*************************************************************************
diff --git a/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch
new file mode 100644
index 0000000000..c060710a8e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch
@@ -0,0 +1,16 @@
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -837,11 +837,13 @@ static int ehci_hub_control (
+ * power switching; they're allowed to just limit the
+ * current. khubd will turn the power back on.
+ */
++#ifndef CONFIG_BCM63XX
+ if (HCS_PPC (ehci->hcs_params)){
+ ehci_writel(ehci,
+ temp & ~(PORT_RWC_BITS | PORT_POWER),
+ status_reg);
+ }
++#endif
+ }
+
+ /* whoever resumes must GetPortStatus to complete it!! */
diff --git a/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch b/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch
new file mode 100644
index 0000000000..d9f7547fa5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch
@@ -0,0 +1,34 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -47,6 +47,13 @@ static unsigned int mac_addr_used;
+ static struct board_info board;
+
+ /*
++ * Required export for WL
++ */
++#define NVRAM_SPACE 0x8000
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
++
++/*
+ * known 6338 boards
+ */
+ #ifdef CONFIG_BCM63XX_CPU_6338
+@@ -1387,6 +1394,7 @@ void __init board_prom_init(void)
+
+ /* extract nvram data */
+ memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
++ memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
+
+ /* check checksum before using data */
+ if (nvram.version <= 4)
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+
+ #endif /* CONFIG_DMA_NONCOHERENT */
+