summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/kernel-build.mk2
-rw-r--r--package/broadcom-diag/src/diag.c43
-rw-r--r--package/broadcom-diag/src/diag.h1
-rw-r--r--package/kernel/modules/netfilter.mk1
-rw-r--r--package/kernel/modules/other.mk8
-rwxr-xr-xscripts/metadata.pl6
-rw-r--r--target/imagebuilder/files/Makefile2
-rw-r--r--target/linux/brcm-2.4/Makefile11
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/init.d/netconfig11
-rw-r--r--target/linux/brcm-2.4/config2
-rw-r--r--target/linux/brcm-2.4/patches/012-aec62xx.patch101
11 files changed, 183 insertions, 5 deletions
diff --git a/include/kernel-build.mk b/include/kernel-build.mk
index 9a1e36328b..26f3054998 100644
--- a/include/kernel-build.mk
+++ b/include/kernel-build.mk
@@ -26,7 +26,7 @@ endif
FEATURES:=$(sort $(FEATURES))
# For target profile selection - the default set
-DEFAULT_PACKAGES:=base-files libgcc uclibc bridge busybox dnsmasq dropbear iptables mtd ppp ppp-mod-pppoe mtd
+DEFAULT_PACKAGES:=base-files libgcc uclibc bridge busybox dnsmasq dropbear iptables mtd ppp ppp-mod-pppoe mtd kmod-ipt-nathelper
ifeq ($(DUMP),1)
all: dumpinfo
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 66e86ccdc3..4dcc0bf15f 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -63,6 +63,7 @@ enum {
WL500GD,
WL500GP,
ASUS_4702,
+ WL700GE,
/* Buffalo */
WBR2_G54,
@@ -101,6 +102,20 @@ enum {
TEW411BRPP,
};
+static void __init wl700ge_init(void) {
+ int pin = 1 << 3;
+
+ /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
+ printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
+ gpio_outen(pin, pin);
+ gpio_control(pin, 0);
+ gpio_out(pin, pin);
+
+ /* Wait 5s, so the HDD can spin up */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ * 5);
+}
+
static struct platform_t __initdata platforms[] = {
/* Linksys */
[WAP54GV1] = {
@@ -244,6 +259,25 @@ static struct platform_t __initdata platforms[] = {
{ .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
},
},
+ [WL700GE] = {
+ .name = "ASUS WL-700gE",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
+ { .name = "ses", .gpio = 1 << 4 }, // on back, actual name ezsetup
+ { .name = "power", .gpio = 1 << 0 }, // on front
+ { .name = "copy", .gpio = 1 << 6 }, // on front
+ },
+ .leds = {
+#if 0
+ // GPIO that controls power led also enables/disables some essential functions
+ // - power to HDD
+ // - switch leds
+ { .name = "power", .gpio = 1 << 3, .polarity = NORMAL }, // actual name power
+#endif
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+ },
+ .platform_init = wl700ge_init,
+ },
/* Buffalo */
[WHR_G54S] = {
.name = "Buffalo WHR-G54S",
@@ -478,10 +512,14 @@ static struct platform_t __init *platform_detect(void)
boardnum = getvar("boardnum");
boardtype = getvar("boardtype");
+
+ if (strncmp(getvar("model_no"), "WL700",5) == 0) {
+ return &platforms[WL700GE]; }
+
if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
/* CFE based - newer hardware */
if (!strcmp(boardnum, "42")) { /* Linksys */
- if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), 1))
+ if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
return &platforms[WRT350N];
if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
@@ -873,6 +911,9 @@ static int __init diag_init(void)
memcpy(&platform, detected, sizeof(struct platform_t));
printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+ if (platform.platform_init != NULL) {
+ platform.platform_init();
+ }
if (!(diag = proc_mkdir("diag", NULL))) {
printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
diff --git a/package/broadcom-diag/src/diag.h b/package/broadcom-diag/src/diag.h
index 30791cffe3..af30823aae 100644
--- a/package/broadcom-diag/src/diag.h
+++ b/package/broadcom-diag/src/diag.h
@@ -66,6 +66,7 @@ struct platform_t {
struct button_t buttons[MAX_GPIO];
u32 button_mask;
u32 button_polarity;
+ void (*platform_init)(void);
struct led_t leds[MAX_GPIO];
};
diff --git a/package/kernel/modules/netfilter.mk b/package/kernel/modules/netfilter.mk
index e14cdb8090..5f7efe61f5 100644
--- a/package/kernel/modules/netfilter.mk
+++ b/package/kernel/modules/netfilter.mk
@@ -87,7 +87,6 @@ $(eval $(call KernelPackage,ipt-nat))
define KernelPackage/ipt-nathelper
TITLE:=Default Conntrack and NAT helpers
- DEFAULT:=y
DESCRIPTION:=\
Default Netfilter (IPv4) Conntrack and NAT helpers \\\
\\\
diff --git a/package/kernel/modules/other.mk b/package/kernel/modules/other.mk
index a5cc4de8f9..d0975e01c7 100644
--- a/package/kernel/modules/other.mk
+++ b/package/kernel/modules/other.mk
@@ -64,6 +64,14 @@ define KernelPackage/ide-pdc202xx
endef
$(eval $(call KernelPackage,ide-pdc202xx))
+define KernelPackage/ide-aec62xx
+ TITLE:=AEC62xx IDE driver
+ SUBMENU:=$(EMENU)
+ KCONFIG:=$(CONFIG_BLK_DEV_AEC62XX)
+ FILES:=$(MODULES_DIR)/kernel/drivers/ide/pci/aec62xx.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,aec62xx)
+endef
+$(eval $(call KernelPackage,ide-aec62xx))
define KernelPackage/lp
TITLE:=Parallel port and line printer support
diff --git a/scripts/metadata.pl b/scripts/metadata.pl
index 396954a2c7..ded38058a4 100755
--- a/scripts/metadata.pl
+++ b/scripts/metadata.pl
@@ -297,8 +297,12 @@ config LINUX_$target->{conf}_$profile->{id}
bool "$profile->{name}"
depends LINUX_$target->{conf}
EOF
+ my %pkgs;
foreach my $pkg (@{$target->{packages}}, @{$profile->{packages}}) {
- print "\tselect DEFAULT_$pkg\n";
+ $pkgs{$pkg} = 1;
+ }
+ foreach my $pkg (keys %pkgs) {
+ print "\tselect DEFAULT_$pkg\n" unless ($pkg =~ /^-/ or $pkgs{"-$pkg"});
}
print "\n";
}
diff --git a/target/imagebuilder/files/Makefile b/target/imagebuilder/files/Makefile
index fbcfa0d49a..7b35e545dd 100644
--- a/target/imagebuilder/files/Makefile
+++ b/target/imagebuilder/files/Makefile
@@ -87,6 +87,8 @@ $(TOPDIR)/tmp/ipkg.conf: FORCE
BUILD_PACKAGES:=$(sort $(DEFAULT_PACKAGES) $(PACKAGES) $($(PROFILE)_PACKAGES) kernel)
BUILD_PACKAGES:=$(patsubst base-files,base-files-$(BOARD)-$(KERNEL),$(BUILD_PACKAGES))
+# "-pkgname" in the package list means remove "pkgname" from the package list
+BUILD_PACKAGES:=$(filter-out $(filter -%,$(BUILD_PACKAGES)) $(patsubst -%,%,$(filter -%,$(BUILD_PACKAGES))),$(BUILD_PACKAGES)
image:
if [ -z "$($(PROFILE)_NAME)" ]; then \
diff --git a/target/linux/brcm-2.4/Makefile b/target/linux/brcm-2.4/Makefile
index 0091360c73..28ee7b9205 100644
--- a/target/linux/brcm-2.4/Makefile
+++ b/target/linux/brcm-2.4/Makefile
@@ -112,4 +112,15 @@ define Profile/WLHDD/Description
endef
$(eval $(call Profile,WLHDD))
+define Profile/WL700GE
+ NAME:=WL-700gE
+ PACKAGES:=-ppp -ppp-mod-pppoe -kmod-ipt-nathelper -iptables -dnsmasq -bridge kmod-ide-core kmod-ide-aec62xx kmod-fs-ext3 fdisk e2fsprogs
+endef
+
+define Profile/WL700GE/Description
+ Minimal package set optimized for booting the WL-700gE from flash with a writable filesystem
+ and the utilities to create a new filesystem on the HDD
+endef
+$(eval $(call Profile,WL700GE))
+
$(eval $(call BuildKernel))
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 7e3ebcdbf1..4cc23d233b 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -101,6 +101,17 @@ start() {
c["wan_ifname"]=""
}
+ # ASUS WL-700gE
+ # These are actually same as defaults above. For some reason this script applies
+ # Generic BCM94704 settings instead so we revert to proper settings here.
+ # Hopefully someone will fix this properly soon.
+ if (model == "ASUS WL-700gE") {
+ c["lan_ifname"]="eth0.0"
+ c["wan_ifname"]="eth0.1"
+ c["vlan0ports"]="1 2 3 4 5*"
+ c["vlan1ports"]="0 5"
+ }
+
print "#### VLAN configuration "
print "config switch eth0"
p("vlan0", "vlan0ports")
diff --git a/target/linux/brcm-2.4/config b/target/linux/brcm-2.4/config
index 8ac37b10aa..91bd41ac9d 100644
--- a/target/linux/brcm-2.4/config
+++ b/target/linux/brcm-2.4/config
@@ -598,7 +598,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
+CONFIG_BLK_DEV_AEC62XX=m
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
diff --git a/target/linux/brcm-2.4/patches/012-aec62xx.patch b/target/linux/brcm-2.4/patches/012-aec62xx.patch
new file mode 100644
index 0000000000..75d7d72ac5
--- /dev/null
+++ b/target/linux/brcm-2.4/patches/012-aec62xx.patch
@@ -0,0 +1,101 @@
+--- linux-2.4.34/drivers/ide/pci/aec62xx.c.old 2006-12-23 22:34:20.000000000 +0200
++++ linux-2.4.34/drivers/ide/pci/aec62xx.c 2007-01-14 12:06:05.000000000 +0200
+@@ -3,6 +3,8 @@
+ *
+ * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
+ *
++ * With Broadcom 4780 patches
++ *
+ */
+
+ #include <linux/module.h>
+@@ -329,7 +331,11 @@
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+- if ((id->capability & 1) && drive->autodma) {
++#ifndef CONFIG_BCM947XX
++ if ((id->capability & 1) && drive->autodma) {
++#else
++ if (1) {
++#endif
+ /* Consult the list of known "bad" drives */
+ if (hwif->ide_dma_bad_drive(drive))
+ goto fast_ata_pio;
+@@ -414,10 +416,60 @@
+ {
+ int bus_speed = system_bus_clock();
+
++#ifndef CONFIG_BCM947XX
+ if (dev->resource[PCI_ROM_RESOURCE].start) {
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
+ printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
+ }
++#else
++ if (dev->resource[PCI_ROM_RESOURCE].start) {
++ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
++ dev->resource[PCI_ROM_RESOURCE].
++ start | PCI_ROM_ADDRESS_ENABLE);
++ } else {
++ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
++ dev->resource[PCI_ROM_RESOURCE].
++ start);
++ }
++
++ /* Set IDE controller parameters manually - FIXME: replace magic values */
++ {
++ byte setting;
++
++ pci_write_config_word(dev, PCI_COMMAND, 0x0007);
++ //pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x5A);
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x13);
++
++ pci_write_config_byte(dev, 0x40, 0x31);
++ pci_write_config_byte(dev, 0x41, 0x31);
++ pci_write_config_byte(dev, 0x42, 0x31);
++ pci_write_config_byte(dev, 0x43, 0x31);
++ // Set IDE Command Speed
++ pci_write_config_byte(dev, 0x48, 0x31);
++
++ // Disable WriteSubSysID & PIOROM
++ pci_read_config_byte(dev, 0x49, &setting);
++ setting &= 0x07;
++ pci_write_config_byte(dev, 0x49, setting);
++
++ // Enable PCI burst & INTA & PCI memory read multiple, FIFO threshold=80
++ pci_read_config_byte(dev, 0x4A, &setting);
++ //setting = (setting & 0xFE) | 0xA8;
++ setting = (setting & 0xFE) | 0xD8;
++ setting = (setting & 0xF7);
++ pci_write_config_byte(dev, 0x4A, setting);
++
++ //pci_write_config_byte(dev, 0x4B, 0x20);
++ pci_write_config_byte(dev, 0x4B, 0x2C);
++ //pci_write_config_byte(dev, 0x4B, 0x0C);
++
++ // Set PreRead count: 512 byte
++ pci_write_config_byte(dev, 0x4C, 0);
++ pci_write_config_word(dev, 0x4D, 0x0002);
++ pci_write_config_byte(dev, 0x54, 0);
++ pci_write_config_word(dev, 0x55, 0x0002);
++ }
++#endif
+
+ #if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
+ aec_devs[n_aec_devs++] = dev;
+@@ -500,6 +552,7 @@
+
+ static void __init init_setup_aec6x80 (struct pci_dev *dev, ide_pci_device_t *d)
+ {
++#ifndef CONFIG_BCM947XX /* Causes OOPS on BCM4780 */
+ unsigned long bar4reg = pci_resource_start(dev, 4);
+
+ if (inb(bar4reg+2) & 0x10) {
+@@ -512,6 +565,7 @@
+ strcpy(d->name, "AEC6280R");
+ }
+
++#endif
+ ide_setup_pci_device(dev, d);
+ }
+