diff options
5 files changed, 29 insertions, 36 deletions
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S10boot b/openwrt/target/default/target_skeleton/etc/init.d/S10boot index 47a255dd0f..0722dc0b76 100755 --- a/openwrt/target/default/target_skeleton/etc/init.d/S10boot +++ b/openwrt/target/default/target_skeleton/etc/init.d/S10boot @@ -40,5 +40,3 @@ vconfig set_name_type VLAN_PLUS_VID_NO_PAD [ -z "$FAILSAFE" ] && { { mount | grep jffs2 1>&-; } || firstboot } - -sysctl -p diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S45firewall b/openwrt/target/default/target_skeleton/etc/init.d/S45firewall index da9fd550f3..7b55643123 100755 --- a/openwrt/target/default/target_skeleton/etc/init.d/S45firewall +++ b/openwrt/target/default/target_skeleton/etc/init.d/S45firewall @@ -32,13 +32,13 @@ iptables -t nat -N postrouting_rule iptables -A INPUT -i \! $WAN -j ACCEPT # allow from lan/wifi interfaces iptables -A INPUT -p icmp -j ACCEPT # allow ICMP iptables -A INPUT -p 47 -j ACCEPT # allow GRE + iptables -A INPUT -p tcp --syn --tcp-option \! 2 -j DROP # # insert accept rule or to jump to new accept-check table here # iptables -A INPUT -j input_rule # reject (what to do with anything not allowed earlier) - iptables -A INPUT -p tcp --syn --tcp-option \! 2 -j DROP iptables -A INPUT -p tcp -j REJECT --reject-with tcp-reset iptables -A INPUT -j REJECT --reject-with icmp-port-unreachable diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S99done b/openwrt/target/default/target_skeleton/etc/init.d/S99done index 70eef460d7..e69691c4b1 100755 --- a/openwrt/target/default/target_skeleton/etc/init.d/S99done +++ b/openwrt/target/default/target_skeleton/etc/init.d/S99done @@ -1,3 +1,4 @@ #!/bin/sh # set leds to normal state echo "0x00" > /proc/sys/diag +sysctl -np diff --git a/openwrt/target/default/target_skeleton/etc/nvram.overrides b/openwrt/target/default/target_skeleton/etc/nvram.overrides index 8132c08e72..03cb2e0798 100644 --- a/openwrt/target/default/target_skeleton/etc/nvram.overrides +++ b/openwrt/target/default/target_skeleton/etc/nvram.overrides @@ -9,27 +9,35 @@ # linksys bug; remove when not using static configuration for lan NVRAM_lan_proto="static" +remap () { + for type in lan wifi wan pppoe + do + for s in '' s + do + eval NVRAM_${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" + done + done +} + # hacks for wrt54g 1.x hardware [ "$(nvram get boardnum)" = "42" ] && \ [ "$(nvram get boardtype)" = "bcm94710dev" ] && { - - # remap eth0 => vlan2, eth1 => vlan1 - # for all *_ifname(s) - debug "### wrt54g 1.x hack ###" NVRAM_vlan1hwname="et0" NVRAM_vlan2hwname="et0" FAILSAFE_ifnames="vlan1 vlan2 eth2" + remap eth0 vlan2 + remap eth1 vlan1 +} - remap () { - eval NVRAM_$1=\"$(nvram get $1 | awk 'gsub("eth0","vlan2") gsub("eth1","vlan1")')\" - } - - for type in lan wifi wan pppoe - do - remap ${type}_ifname - remap ${type}_ifnames - done +# hacks for asus wl-500g deluxe +[ "$(nvram get boardtype)" = "bcm95365r" ] && \ +[ "$(nvram get boardnum)" = "45" ] && { + debug "### wl-500g deluxe hacks ###" + NVRAM_vlan0hwname="et0" + NVRAM_vlan1hwname="et0" + FAILSAFE_ifnames="vlan0 vlan1 eth2" + remap eth0. vlan } # hacks for wap54g hardware @@ -44,48 +52,33 @@ NVRAM_lan_proto="static" [ "$(nvram get boardnum)" = "00" ] && \ [ "$(nvram get product_name)" = "Product_name" ] && { debug "### wla2-g54l hacks ###" - NVRAM_lan_ifnames="vlan0" NVRAM_wan_ifname="none" + NVRAM_lan_ifnames="vlan0" } # hack for asus wl-500g hardware [ "$(nvram get boardnum)" = "asusX" ] && \ [ "$(nvram get boardtype)" = "bcm94710dev" ] && { - FAILSAFE_lan_ifnames="eth0 eth2" -} - -# hacks for asus wl-500g deluxe -[ "$(nvram get boardtype)" = "bcm95365r" ] && \ -[ "$(nvram get boardnum)" = "45" ] && { - debug "### wl-500g deluxe hacks ###" - NVRAM_vlan0hwname="et0" - NVRAM_vlan1hwname="et0" - NVRAM_lan_ifnames="vlan0 eth1" - [ "$(nvram get wan_ifname)" = "eth0.1" ] && { - NVRAM_wan_ifname="vlan1" - } + FAILSAFE_ifnames="eth0 eth2" } # defaults if lan_ifname is missing [ -z "$(nvram get lan_ifname)" ] && { NVRAM_lan_ifname="br0" - NVRAM_lan_ifnames=${FAILSAFE_lan_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"} + NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"} } # defaults if wan_ifname is missing [ -z "$(nvram get wan_ifname)" ] && { NVRAM_wan_ifname="vlan1" NVRAM_wan_proto="dhcp" - [ "$asus" ] && { - NVRAM_wan_ifname="eth1" - } } # failsafe if reset is held [ "$FAILSAFE" = "true" ] && { echo "### YOU ARE IN FAILSAFE MODE ####" NVRAM_lan_ifname="br0" - NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"} + NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"} NVRAM_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"} NVRAM_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"} NVRAM_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"} diff --git a/openwrt/target/default/target_skeleton/sbin/ifup b/openwrt/target/default/target_skeleton/sbin/ifup index 72efa69012..4236de06b6 100755 --- a/openwrt/target/default/target_skeleton/sbin/ifup +++ b/openwrt/target/default/target_skeleton/sbin/ifup @@ -45,11 +45,12 @@ } done ;; dhcp) + ip=$(nvram get ${type}_ipaddr) pidfile=/tmp/dhcp-${type}.pid if [ -f $pidfile ]; then $DEBUG kill $(cat $pidfile) fi - ${DEBUG:-eval} "udhcpc -i $if -b -p $pidfile &" + ${DEBUG:-eval} "udhcpc -i $if ${ip:+-r $ip} -b -p $pidfile &" ;; pppoe) # handled by /etc/init.d/S50pppoe |