diff options
| -rw-r--r-- | package/kernel/linux/modules/can.mk | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/package/kernel/linux/modules/can.mk b/package/kernel/linux/modules/can.mk new file mode 100644 index 0000000000..39c1c969ad --- /dev/null +++ b/package/kernel/linux/modules/can.mk @@ -0,0 +1,222 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +CAN_MENU:=CAN Support + +define KernelPackage/can + SUBMENU:=$(CAN_MENU) + TITLE:=CAN bus support + KCONFIG:=\ + CONFIG_CAN=y \ + CONFIG_CAN_DEV \ + CONFIG_CAN_CALC_BITTIMING=y \ + CONFIG_CAN_LEDS=y \ + CONFIG_CAN_AT91=n \ + CONFIG_CAN_TI_HECC=n \ + CONFIG_CAN_MCP251X=n \ + CONFIG_CAN_BFIN=n \ + CONFIG_CAN_JANZ_ICAN3=n \ + CONFIG_PCH_CAN=n \ + CONFIG_CAN_GRCAN=n \ + CONFIG_CAN_CC770=n \ + CONFIG_CAN_C_CAN=n \ + CONFIG_CAN_MSCAN=n \ + CONFIG_CAN_SJA1000=n \ + CONFIG_CAN_SOFTING=n \ + CONFIG_NET_EMATCH_CANID=n \ + CONFIG_CAN_DEBUG_DEVICES=n + FILES:=$(LINUX_DIR)/drivers/net/can/can-dev.ko + AUTOLOAD:=$(call AutoProbe,can-dev) +endef + +define KernelPackage/can/description + Kernel module for CAN bus support. +endef + +$(eval $(call KernelPackage,can)) + + +define AddDepends/can + SUBMENU:=$(CAN_MENU) + DEPENDS+=kmod-can $(1) +endef + + +define KernelPackage/can-raw + TITLE:=Raw CAN Protcol + KCONFIG:=CONFIG_CAN_RAW + FILES:=$(LINUX_DIR)/net/can/can-raw.ko + AUTOLOAD:=$(call AutoProbe,can-raw) + $(call AddDepends/can) +endef + +define KernelPackage/can-raw/description + The raw CAN protocol option offers access to the CAN bus via + the BSD socket API. +endef + +$(eval $(call KernelPackage,can-raw)) + + +define KernelPackage/can-bcm + TITLE:=Broadcast Manager CAN Protcol + KCONFIG:=CONFIG_CAN_BCM + FILES:=$(LINUX_DIR)/net/can/can-bcm.ko + AUTOLOAD:=$(call AutoProbe,can-bcm) + $(call AddDepends/can) +endef + +define KernelPackage/can-bcm/description + The Broadcast Manager offers content filtering, timeout monitoring, + sending of RTR frames, and cyclic CAN messages without permanent user + interaction. +endef + +$(eval $(call KernelPackage,can-bcm)) + + +define KernelPackage/can-gw + TITLE:=CAN Gateway/Router + KCONFIG:=CONFIG_CAN_GW + FILES:=$(LINUX_DIR)/net/can/can-gw.ko + AUTOLOAD:=$(call AutoProbe,can-gw) + $(call AddDepends/can) +endef + +define KernelPackage/can-gw/description + The CAN Gateway/Router is used to route (and modify) CAN frames. +endef + +$(eval $(call KernelPackage,can-gw)) + + +define KernelPackage/can-vcan + TITLE:=Virtual Local CAN Interface (vcan) + KCONFIG:=CONFIG_CAN_VCAN + FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko + AUTOLOAD:=$(call AutoProbe,vcan) + $(call AddDepends/can) +endef + +define KernelPackage/can-vcan/description + Similar to the network loopback devices, vcan offers a + virtual local CAN interface. +endef + +$(eval $(call KernelPackage,can-vcan)) + + +define KernelPackage/can-slcan + TITLE:=Serial / USB serial CAN Adaptors (slcan) + KCONFIG:=CONFIG_CAN_SLCAN + FILES:=$(LINUX_DIR)/drivers/net/can/slcan.ko + AUTOLOAD:=$(call AutoProbe,slcan) + $(call AddDepends/can) +endef + +define KernelPackage/can-slcan/description + CAN driver for several 'low cost' CAN interfaces that are attached + via serial lines or via USB-to-serial adapters using the LAWICEL + ASCII protocol. +endef + +$(eval $(call KernelPackage,can-slcan)) + + +define KernelPackage/can-flexcan + TITLE:=Support for Freescale FLEXCAN based chips + KCONFIG:=CONFIG_CAN_FLEXCAN + FILES:=$(LINUX_DIR)/drivers/net/can/flexcan.ko + AUTOLOAD:=$(call AutoProbe,flexcan) + $(call AddDepends/can,@TARGET_imx6) +endef + +define KernelPackage/can-flexcan/description + Freescale FLEXCAN CAN bus controller implementation. +endef + +$(eval $(call KernelPackage,can-flexcan)) + + +define KernelPackage/can-usb-ems + TITLE:=EMS CPC-USB/ARM7 CAN/USB interface + KCONFIG:=CONFIG_CAN_EMS_USB + FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko + AUTOLOAD:=$(call AutoProbe,ems_usb) + $(call AddDepends/can,+kmod-usb-core) +endef + +define KernelPackage/can-usb-ems/description + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). +endef + +$(eval $(call KernelPackage,can-usb-ems)) + + +define KernelPackage/can-usb-esd + TITLE:=ESD USB/2 CAN/USB interface + KCONFIG:=CONFIG_CAN_ESD_USB2 + FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko + AUTOLOAD:=$(call AutoProbe,esd_usb2) + $(call AddDepends/can,+kmod-usb-core) +endef + +define KernelPackage/can-usb-esd/description + This driver supports the CAN-USB/2 interface + from esd electronic system design gmbh (http://www.esd.eu). +endef + +$(eval $(call KernelPackage,can-usb-esd)) + + +define KernelPackage/can-usb-kvaser + TITLE:=Kvaser CAN/USB interface + KCONFIG:=CONFIG_CAN_KVASER_USB + FILES:=$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb.ko + AUTOLOAD:=$(call AutoProbe,kvaser_usb) + $(call AddDepends/can,+kmod-usb-core) +endef + +define KernelPackage/can-usb-kvaser/description + This driver adds support for Kvaser CAN/USB devices like Kvaser + Leaf Light. +endef + +$(eval $(call KernelPackage,can-usb-kvaser)) + + +define KernelPackage/can-usb-peak + TITLE:=PEAK PCAN-USB/USB Pro interfaces + KCONFIG:=CONFIG_CAN_PEAK_USB + FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko + AUTOLOAD:=$(call AutoProbe,peak_usb) + $(call AddDepends/can,+kmod-usb-core) +endef + +define KernelPackage/can-usb-peak/description + This driver supports the PCAN-USB and PCAN-USB Pro adapters + from PEAK-System Technik (http://www.peak-system.com). +endef + +$(eval $(call KernelPackage,can-usb-peak)) + + +define KernelPackage/can-usb-8dev + TITLE:=8 devices USB2CAN interface + KCONFIG:=CONFIG_CAN_8DEV_USB + FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko + AUTOLOAD:=$(call AutoProbe,usb_8dev) + $(call AddDepends/can,+kmod-usb-core) +endef + +define KernelPackage/can-usb-8dev/description + This driver supports the USB2CAN interface + from 8 devices (http://www.8devices.com). +endef + +$(eval $(call KernelPackage,can-usb-8dev)) |