diff options
22 files changed, 1424 insertions, 1456 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index de3b4c5d26..b1e5a609f4 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c PATCH_DIR:=./patches-old else - PKG_VERSION:=2009-03-13 + PKG_VERSION:=2009-03-18 PKG_RELEASE:=1 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \ http://wireless.kernel.org/download/compat-wireless-2.6 - PKG_MD5SUM:=bc924e8914a78d5a40ce4c17e5d28447 + PKG_MD5SUM:=d46d230f62aed9bdec7a1f168feb221b endif PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2 @@ -428,7 +428,6 @@ define Build/Prepare $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 rm -rf $(PKG_BUILD_DIR)/include/linux/ssb rm -f $(PKG_BUILD_DIR)/include/net/ieee80211.h - rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h endef diff --git a/package/mac80211/patches/007-remove_unused_stuff.patch b/package/mac80211/patches/007-remove_unused_stuff.patch index 965416d147..66b5c47ccb 100644 --- a/package/mac80211/patches/007-remove_unused_stuff.patch +++ b/package/mac80211/patches/007-remove_unused_stuff.patch @@ -1,10 +1,8 @@ -Index: compat-wireless-2009-03-13/config.mk -=================================================================== ---- compat-wireless-2009-03-13.orig/config.mk 2009-03-17 23:34:31.000000000 +0100 -+++ compat-wireless-2009-03-13/config.mk 2009-03-17 23:40:08.000000000 +0100 -@@ -91,10 +91,10 @@ CONFIG_MAC80211_MESH=y +--- a/config.mk ++++ b/config.mk +@@ -104,10 +104,10 @@ CONFIG_MAC80211_MESH=y CONFIG_CFG80211=m - # CONFIG_CFG80211_REG_DEBUG is not set + # CONFIG_CFG80211_REG_DEBUG=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m @@ -14,47 +12,80 @@ Index: compat-wireless-2009-03-13/config.mk +# CONFIG_LIB80211_CRYPT_WEP=m +# CONFIG_LIB80211_CRYPT_CCMP=m +# CONFIG_LIB80211_CRYPT_TKIP=m + # CONFIG_LIB80211_DEBUG=y CONFIG_NL80211=y +@@ -128,54 +128,54 @@ CONFIG_ATH9K=m + # CONFIG_ATH9K_DEBUG=y -@@ -129,18 +129,18 @@ CONFIG_IWL3945_LEDS=y +-CONFIG_IWLWIFI=m +-CONFIG_IWLWIFI_LEDS=y ++# CONFIG_IWLWIFI=m ++# CONFIG_IWLWIFI_LEDS=y + # CONFIG_IWLWIFI_RFKILL=y +-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y ++# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y + # CONFIG_IWLWIFI_DEBUG=y + # CONFIG_IWLWIFI_DEBUGFS=y +-CONFIG_IWLAGN=m +-CONFIG_IWL4965=y +-CONFIG_IWL5000=y +-CONFIG_IWL3945=m +-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y ++# CONFIG_IWLAGN=m ++# CONFIG_IWL4965=y ++# CONFIG_IWL5000=y ++# CONFIG_IWL3945=m ++# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y - CONFIG_B43=m + +-CONFIG_B43=m -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_PCMCIA=y -CONFIG_B43_PIO=y -CONFIG_B43_LEDS=y ++# CONFIG_B43=m +# CONFIG_B43_PCI_AUTOSELECT=y +# CONFIG_B43_PCICORE_AUTOSELECT=y +# CONFIG_B43_PCMCIA=y +# CONFIG_B43_PIO=y +# CONFIG_B43_LEDS=y # CONFIG_B43_RFKILL=y - # CONFIG_B43_DEBUG is not set + # CONFIG_B43_DEBUG=y + # CONFIG_B43_FORCE_PIO=y - CONFIG_B43LEGACY=m - CONFIG_B43LEGACY_PCI_AUTOSELECT=y - CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +-CONFIG_B43LEGACY=m +-CONFIG_B43LEGACY_PCI_AUTOSELECT=y +-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y ++# CONFIG_B43LEGACY=m ++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y ++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +# CONFIG_B43LEGACY_LEDS=y # CONFIG_B43LEGACY_RFKILL=y # CONFIG_B43LEGACY_DEBUG=y - CONFIG_B43LEGACY_DMA=y -@@ -150,17 +150,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y - # CONFIG_B43LEGACY_PIO_MODE is not set +-CONFIG_B43LEGACY_DMA=y +-CONFIG_B43LEGACY_PIO=y +-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y ++# CONFIG_B43LEGACY_DMA=y ++# CONFIG_B43LEGACY_PIO=y ++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y + # CONFIG_B43LEGACY_DMA_MODE=y + # CONFIG_B43LEGACY_PIO_MODE=y # The Intel ipws -CONFIG_LIBIPW=m +# CONFIG_LIBIPW=m - # CONFIG_LIBIPW_DEBUG is not set + # CONFIG_LIBIPW_DEBUG=y + -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2100=m +# CONFIG_IPW2100_MONITOR=y - # CONFIG_IPW2100_DEBUG is not set + # CONFIG_IPW2100_DEBUG=y -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y @@ -65,52 +96,119 @@ Index: compat-wireless-2009-03-13/config.mk +# CONFIG_IPW2200_RADIOTAP=y +# CONFIG_IPW2200_PROMISCUOUS=y +# CONFIG_IPW2200_QOS=y - # CONFIG_IPW2200_DEBUG is not set + # CONFIG_IPW2200_DEBUG=y # The above enables use a second interface prefixed 'rtap'. # Example usage: -@@ -176,13 +176,13 @@ CONFIG_IPW2200_QOS=y +@@ -190,27 +190,27 @@ CONFIG_IPW2200_QOS=y + # # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface - CONFIG_SSB_BLOCKIO=y +-CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -+# CONFIG_SSB_PCIHOST_POSSIBLE=y -+# CONFIG_SSB_PCIHOST=y - CONFIG_SSB_B43_PCI_BRIDGE=y +-CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -CONFIG_SSB_PCMCIAHOST=y --CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y --CONFIG_SSB_DRIVER_PCICORE=y ++# CONFIG_SSB_BLOCKIO=y ++# CONFIG_SSB_PCIHOST_POSSIBLE=y ++# CONFIG_SSB_PCIHOST=y ++# CONFIG_SSB_B43_PCI_BRIDGE=y +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST=y + # CONFIG_SSB_DEBUG=y +-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +-CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +# CONFIG_SSB_DRIVER_PCICORE=y CONFIG_P54_PCI=m -@@ -277,21 +277,21 @@ CONFIG_P54_COMMON=m +-CONFIG_B44=m +-CONFIG_B44_PCI_AUTOSELECT=y +-CONFIG_B44_PCICORE_AUTOSELECT=y +-CONFIG_B44_PCI=y ++# CONFIG_B44=m ++# CONFIG_B44_PCI_AUTOSELECT=y ++# CONFIG_B44_PCICORE_AUTOSELECT=y ++# CONFIG_B44_PCI=y + +-CONFIG_RTL8180=m ++# CONFIG_RTL8180=m + +-CONFIG_ADM8211=m +-CONFIG_PCMCIA_ATMEL=m ++# CONFIG_ADM8211=m ++# CONFIG_PCMCIA_ATMEL=m + + CONFIG_RT2X00_LIB_PCI=m + CONFIG_RT2400PCI=m +@@ -226,16 +226,16 @@ CONFIG_RT61PCI=m + NEED_RT2X00_FIRMWARE=y + endif + +-CONFIG_ATMEL=m +-CONFIG_PCI_ATMEL=m ++# CONFIG_ATMEL=m ++# CONFIG_PCI_ATMEL=m + +-CONFIG_MWL8K=m ++# CONFIG_MWL8K=m + + endif + ## end of PCI + + # This is required for some cards +-CONFIG_EEPROM_93CX6=m ++# CONFIG_EEPROM_93CX6=m + + # USB Drivers + ifneq ($(CONFIG_USB),) +@@ -249,15 +249,15 @@ CONFIG_ZD1211RW=m + # is only wireless RNDIS chip known to date. + # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER + # it also requires new RNDIS_HOST and CDC_ETHER modules which we add +-CONFIG_USB_NET_RNDIS_HOST=m +-CONFIG_USB_NET_RNDIS_WLAN=m +-CONFIG_USB_NET_CDCETHER=m ++# CONFIG_USB_NET_RNDIS_HOST=m ++# CONFIG_USB_NET_RNDIS_WLAN=m ++# CONFIG_USB_NET_CDCETHER=m + + + CONFIG_P54_USB=m +-CONFIG_RTL8187=m ++# CONFIG_RTL8187=m + +-CONFIG_AT76C50X_USB=m ++# CONFIG_AT76C50X_USB=m + + # RT2500USB does not require firmware + CONFIG_RT2500USB=m +@@ -294,20 +294,20 @@ CONFIG_P54_COMMON=m + + # Sonics Silicon Backplane - CONFIG_SSB_POSSIBLE=y - CONFIG_SSB=m +-CONFIG_SSB_POSSIBLE=y +-CONFIG_SSB=m -CONFIG_SSB_SPROM=y ++# CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB=m +# CONFIG_SSB_SPROM=y - # CONFIG_SSB_DEBUG is not set + # CONFIG_SSB_DEBUG=y ifneq ($(CONFIG_USB),) ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m) - CONFIG_LIBERTAS_USB=m +-CONFIG_LIBERTAS_USB=m -NEED_LIBERTAS=y -+#NEED_LIBERTAS=y ++# CONFIG_LIBERTAS_USB=m ++# NEED_LIBERTAS=y endif endif ifneq ($(CONFIG_PCMCIA),) - CONFIG_LIBERTAS_CS=m +-CONFIG_LIBERTAS_CS=m -NEED_LIBERTAS=y -+#NEED_LIBERTAS=y ++# CONFIG_LIBERTAS_CS=m ++# NEED_LIBERTAS=y endif ifeq ($(NEED_LIBERTAS),y) --CONFIG_LIBERTAS=m -+#CONFIG_LIBERTAS=m - # Libertas uses the old stack but not fully, it will soon - # be cleaned. - endif + CONFIG_LIBERTAS=m diff --git a/package/mac80211/patches/201-ath5k_eeprom.patch b/package/mac80211/patches/201-ath5k_eeprom.patch deleted file mode 100644 index b42110d9bf..0000000000 --- a/package/mac80211/patches/201-ath5k_eeprom.patch +++ /dev/null @@ -1,494 +0,0 @@ -Clean up the eeprom parsing code and prepare the pdgain -data for 2413, which will be required for power calibration code. -Also clean up some ugly line wrapping to make the code easier on -the eyes. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> - ---- a/drivers/net/wireless/ath5k/eeprom.c -+++ b/drivers/net/wireless/ath5k/eeprom.c -@@ -541,31 +541,30 @@ ath5k_eeprom_read_freq_list(struct ath5k - { - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - int o = *offset; -- int i = 0; -+ int i = 0 ; - u8 freq1, freq2; - int ret; - u16 val; - -+ ee->ee_n_piers[mode] = 0; - while(i < max) { - AR5K_EEPROM_READ(o++, val); - -- freq1 = (val >> 8) & 0xff; -- freq2 = val & 0xff; -+ freq1 = val & 0xff; -+ if (!freq1) -+ break; - -- if (freq1) { -- pc[i++].freq = ath5k_eeprom_bin2freq(ee, -- freq1, mode); -- ee->ee_n_piers[mode]++; -- } -+ pc[i++].freq = ath5k_eeprom_bin2freq(ee, -+ freq1, mode); -+ ee->ee_n_piers[mode]++; - -- if (freq2) { -- pc[i++].freq = ath5k_eeprom_bin2freq(ee, -- freq2, mode); -- ee->ee_n_piers[mode]++; -- } -- -- if (!freq1 || !freq2) -+ freq2 = (val >> 8) & 0xff; -+ if (!freq2) - break; -+ -+ pc[i++].freq = ath5k_eeprom_bin2freq(ee, -+ freq2, mode); -+ ee->ee_n_piers[mode]++; - } - - /* return new offset */ -@@ -918,84 +917,46 @@ ath5k_cal_data_offset_2413(struct ath5k_ - * curves on eeprom. The final curve (higher power) has an extra - * point for better accuracy like RF5112. - */ -+ - static int --ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) -+ath5k_eeprom_parse_pcal_info_2413(struct ath5k_hw *ah, int mode, u32 offset, -+ struct ath5k_chan_pcal_info *chinfo) - { - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; -- struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info; -- struct ath5k_chan_pcal_info *gen_chan_info; -- unsigned int i, c; -- u32 offset; -+ struct ath5k_chan_pcal_info_rf2413 *pcinfo; -+ unsigned int i; - int ret; - u16 val; -- u8 pd_gains = 0; -- -- if (ee->ee_x_gain[mode] & 0x1) pd_gains++; -- if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++; -- if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++; -- if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++; -- ee->ee_pd_gains[mode] = pd_gains; -- -- offset = ath5k_cal_data_offset_2413(ee, mode); -- ee->ee_n_piers[mode] = 0; -- switch (mode) { -- case AR5K_EEPROM_MODE_11A: -- if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) -- return 0; -- -- ath5k_eeprom_init_11a_pcal_freq(ah, offset); -- offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; -- gen_chan_info = ee->ee_pwr_cal_a; -- break; -- case AR5K_EEPROM_MODE_11B: -- if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) -- return 0; -+ u8 pd_gains; - -- ath5k_eeprom_init_11bg_2413(ah, mode, offset); -- offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; -- gen_chan_info = ee->ee_pwr_cal_b; -- break; -- case AR5K_EEPROM_MODE_11G: -- if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) -- return 0; -- -- ath5k_eeprom_init_11bg_2413(ah, mode, offset); -- offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; -- gen_chan_info = ee->ee_pwr_cal_g; -- break; -- default: -- return -EINVAL; -- } -+ pd_gains = ee->ee_pd_gains[mode]; - - if (pd_gains == 0) - return 0; - - for (i = 0; i < ee->ee_n_piers[mode]; i++) { -- chan_pcal_info = &gen_chan_info[i].rf2413_info; -+ pcinfo = &chinfo[i].rf2413_info; - - /* - * Read pwr_i, pddac_i and the first - * 2 pd points (pwr, pddac) - */ - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr_i[0] = val & 0x1f; -- chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f; -- chan_pcal_info->pwr[0][0] = -- (val >> 12) & 0xf; -+ pcinfo->pwr_i[0] = val & 0x1f; -+ pcinfo->pddac_i[0] = (val >> 5) & 0x7f; -+ pcinfo->pwr[0][0] = (val >> 12) & 0xf; - - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[0][0] = val & 0x3f; -- chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf; -- chan_pcal_info->pddac[0][1] = -- (val >> 10) & 0x3f; -+ pcinfo->pddac[0][0] = val & 0x3f; -+ pcinfo->pwr[0][1] = (val >> 6) & 0xf; -+ pcinfo->pddac[0][1] = (val >> 10) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr[0][2] = val & 0xf; -- chan_pcal_info->pddac[0][2] = -- (val >> 4) & 0x3f; -+ pcinfo->pwr[0][2] = val & 0xf; -+ pcinfo->pddac[0][2] = (val >> 4) & 0x3f; - -- chan_pcal_info->pwr[0][3] = 0; -- chan_pcal_info->pddac[0][3] = 0; -+ pcinfo->pwr[0][3] = 0; -+ pcinfo->pddac[0][3] = 0; - - if (pd_gains > 1) { - /* -@@ -1003,44 +964,36 @@ ath5k_eeprom_read_pcal_info_2413(struct - * so it only has 2 pd points. - * Continue wih pd gain 1. - */ -- chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f; -+ pcinfo->pwr_i[1] = (val >> 10) & 0x1f; - -- chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1; -+ pcinfo->pddac_i[1] = (val >> 15) & 0x1; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1; -+ pcinfo->pddac_i[1] |= (val & 0x3F) << 1; - -- chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf; -- chan_pcal_info->pddac[1][0] = -- (val >> 10) & 0x3f; -+ pcinfo->pwr[1][0] = (val >> 6) & 0xf; -+ pcinfo->pddac[1][0] = (val >> 10) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr[1][1] = val & 0xf; -- chan_pcal_info->pddac[1][1] = -- (val >> 4) & 0x3f; -- chan_pcal_info->pwr[1][2] = -- (val >> 10) & 0xf; -+ pcinfo->pwr[1][1] = val & 0xf; -+ pcinfo->pddac[1][1] = (val >> 4) & 0x3f; -+ pcinfo->pwr[1][2] = (val >> 10) & 0xf; - -- chan_pcal_info->pddac[1][2] = -- (val >> 14) & 0x3; -+ pcinfo->pddac[1][2] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[1][2] |= -- (val & 0xF) << 2; -+ pcinfo->pddac[1][2] |= (val & 0xF) << 2; - -- chan_pcal_info->pwr[1][3] = 0; -- chan_pcal_info->pddac[1][3] = 0; -+ pcinfo->pwr[1][3] = 0; -+ pcinfo->pddac[1][3] = 0; - } else if (pd_gains == 1) { - /* - * Pd gain 0 is the last one so - * read the extra point. - */ -- chan_pcal_info->pwr[0][3] = -- (val >> 10) & 0xf; -+ pcinfo->pwr[0][3] = (val >> 10) & 0xf; - -- chan_pcal_info->pddac[0][3] = -- (val >> 14) & 0x3; -+ pcinfo->pddac[0][3] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[0][3] |= -- (val & 0xF) << 2; -+ pcinfo->pddac[0][3] |= (val & 0xF) << 2; - } - - /* -@@ -1048,105 +1001,159 @@ ath5k_eeprom_read_pcal_info_2413(struct - * as above. - */ - if (pd_gains > 2) { -- chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f; -- chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f; -+ pcinfo->pwr_i[2] = (val >> 4) & 0x1f; -+ pcinfo->pddac_i[2] = (val >> 9) & 0x7f; - - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr[2][0] = -- (val >> 0) & 0xf; -- chan_pcal_info->pddac[2][0] = -- (val >> 4) & 0x3f; -- chan_pcal_info->pwr[2][1] = -- (val >> 10) & 0xf; -- -- chan_pcal_info->pddac[2][1] = -- (val >> 14) & 0x3; -- AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[2][1] |= -- (val & 0xF) << 2; -- -- chan_pcal_info->pwr[2][2] = -- (val >> 4) & 0xf; -- chan_pcal_info->pddac[2][2] = -- (val >> 8) & 0x3f; -+ pcinfo->pwr[2][0] = (val >> 0) & 0xf; -+ pcinfo->pddac[2][0] = (val >> 4) & 0x3f; -+ pcinfo->pwr[2][1] = (val >> 10) & 0xf; - -- chan_pcal_info->pwr[2][3] = 0; -- chan_pcal_info->pddac[2][3] = 0; -+ pcinfo->pddac[2][1] = (val >> 14) & 0x3; -+ AR5K_EEPROM_READ(offset++, val); -+ pcinfo->pddac[2][1] |= (val & 0xF) << 2; -+ -+ pcinfo->pwr[2][2] = (val >> 4) & 0xf; -+ pcinfo->pddac[2][2] = (val >> 8) & 0x3f; -+ -+ pcinfo->pwr[2][3] = 0; -+ pcinfo->pddac[2][3] = 0; - } else if (pd_gains == 2) { -- chan_pcal_info->pwr[1][3] = -- (val >> 4) & 0xf; -- chan_pcal_info->pddac[1][3] = -- (val >> 8) & 0x3f; -+ pcinfo->pwr[1][3] = (val >> 4) & 0xf; -+ pcinfo->pddac[1][3] = (val >> 8) & 0x3f; - } - - if (pd_gains > 3) { -- chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3; -+ pcinfo->pwr_i[3] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2; -+ pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; - -- chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f; -- chan_pcal_info->pwr[3][0] = -- (val >> 10) & 0xf; -- chan_pcal_info->pddac[3][0] = -- (val >> 14) & 0x3; -+ pcinfo->pddac_i[3] = (val >> 3) & 0x7f; -+ pcinfo->pwr[3][0] = (val >> 10) & 0xf; -+ pcinfo->pddac[3][0] = (val >> 14) & 0x3; - - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[3][0] |= -- (val & 0xF) << 2; -- chan_pcal_info->pwr[3][1] = -- (val >> 4) & 0xf; -- chan_pcal_info->pddac[3][1] = -- (val >> 8) & 0x3f; -+ pcinfo->pddac[3][0] |= (val & 0xF) << 2; -+ pcinfo->pwr[3][1] = (val >> 4) & 0xf; -+ pcinfo->pddac[3][1] = (val >> 8) & 0x3f; - -- chan_pcal_info->pwr[3][2] = -- (val >> 14) & 0x3; -+ pcinfo->pwr[3][2] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr[3][2] |= -- ((val >> 0) & 0x3) << 2; -+ pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; - -- chan_pcal_info->pddac[3][2] = -- (val >> 2) & 0x3f; -- chan_pcal_info->pwr[3][3] = -- (val >> 8) & 0xf; -+ pcinfo->pddac[3][2] = (val >> 2) & 0x3f; -+ pcinfo->pwr[3][3] = (val >> 8) & 0xf; - -- chan_pcal_info->pddac[3][3] = -- (val >> 12) & 0xF; -+ pcinfo->pddac[3][3] = (val >> 12) & 0xF; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pddac[3][3] |= -- ((val >> 0) & 0x3) << 4; -+ pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; - } else if (pd_gains == 3) { -- chan_pcal_info->pwr[2][3] = -- (val >> 14) & 0x3; -+ pcinfo->pwr[2][3] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); -- chan_pcal_info->pwr[2][3] |= -- ((val >> 0) & 0x3) << 2; -+ pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; - -- chan_pcal_info->pddac[2][3] = -- (val >> 2) & 0x3f; -+ pcinfo->pddac[2][3] = (val >> 2) & 0x3f; - } -+ } -+ return 0; -+} -+ -+static int -+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, -+ struct ath5k_chan_pcal_info *chinfo, -+ unsigned int *xgains) -+{ -+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; -+ struct ath5k_chan_pcal_info_rf2413 *pcinfo; -+ unsigned int i, j, k; - -- for (c = 0; c < pd_gains; c++) { -- /* Recreate pwr table for this channel using pwr steps */ -- chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2; -- chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0]; -- chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1]; -- chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2]; -- if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2]) -- chan_pcal_info->pwr[c][3] = 0; -- -- /* Recreate pddac table for this channel using pddac steps */ -- chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c]; -- chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0]; -- chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1]; -- chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2]; -- if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2]) -- chan_pcal_info->pddac[c][3] = 0; -+ /* prepare the raw values */ -+ for (i = 0; i < ee->ee_n_piers[mode]; i++) { -+ pcinfo = &chinfo[i].rf2413_info; -+ for (j = 0; j < ee->ee_pd_gains[mode]; j++) { -+ unsigned int idx = xgains[j]; -+ struct ath5k_pdgain_info *pd = &pcinfo->pdgains[idx]; -+ -+ /* one more point for the highest power (lowest gain) */ -+ if (j == ee->ee_pd_gains[mode] - 1) { -+ pd->n_vpd = AR5K_EEPROM_N_PD_POINTS; -+ } else { -+ pd->n_vpd = AR5K_EEPROM_N_PD_POINTS - 1; -+ } -+ -+ pd->vpd[0] = pcinfo->pddac_i[j]; -+ pd->pwr_t4[0] = 4 * pcinfo->pwr_i[j]; -+ for (k = 1; k < pd->n_vpd; k++) { -+ pd->pwr_t4[k] = pd->pwr_t4[k - 1] + 2 * pcinfo->pwr[j][k - 1]; -+ pd->vpd[k] = pd->vpd[k - 1] + pcinfo->pddac[j][k - 1]; -+ } - } - } - - return 0; - } - -+static int -+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) -+{ -+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; -+ struct ath5k_chan_pcal_info *chinfo; -+ unsigned int xgains[AR5K_EEPROM_N_PD_GAINS]; -+ u32 offset; -+ u8 pd_gains = 0; -+ int i, ret; -+ -+ memset(xgains, 0, sizeof(xgains)); -+ for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) { -+ int idx = AR5K_EEPROM_N_PD_GAINS - i - 1; -+ -+ if ((ee->ee_x_gain[mode] >> idx) & 0x1) -+ xgains[pd_gains++] = idx; -+ } -+ ee->ee_pd_gains[mode] = pd_gains; -+ -+ offset = ath5k_cal_data_offset_2413(ee, mode); -+ switch (mode) { -+ case AR5K_EEPROM_MODE_11A: -+ if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) -+ return 0; -+ -+ ath5k_eeprom_init_11a_pcal_freq(ah, offset); -+ offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; -+ chinfo = ee->ee_pwr_cal_a; -+ break; -+ case AR5K_EEPROM_MODE_11B: -+ if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) -+ return 0; -+ -+ ath5k_eeprom_init_11bg_2413(ah, mode, offset); -+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; -+ chinfo = ee->ee_pwr_cal_b; -+ break; -+ case AR5K_EEPROM_MODE_11G: -+ if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) -+ return 0; -+ -+ ath5k_eeprom_init_11bg_2413(ah, mode, offset); -+ offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; -+ chinfo = ee->ee_pwr_cal_g; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ -+ ret = ath5k_eeprom_parse_pcal_info_2413(ah, mode, offset, chinfo); -+ if (ret) -+ return ret; -+ -+ ret = ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo, xgains); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ - /* - * Read per rate target power (this is the maximum tx power - * supported by the card). This info is used when setting -@@ -1264,6 +1271,7 @@ ath5k_eeprom_read_pcal_info(struct ath5k - else - read_pcal = ath5k_eeprom_read_pcal_info_5111; - -+ - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { - err = read_pcal(ah, mode); - if (err) ---- a/drivers/net/wireless/ath5k/eeprom.h -+++ b/drivers/net/wireless/ath5k/eeprom.h -@@ -266,15 +266,27 @@ struct ath5k_chan_pcal_info_rf5112 { - u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; - }; - -+ -+struct ath5k_pdgain_info { -+ u16 n_vpd; -+ u16 vpd[AR5K_EEPROM_N_PD_POINTS]; -+ s16 pwr_t4[AR5K_EEPROM_N_PD_POINTS]; -+}; -+ - struct ath5k_chan_pcal_info_rf2413 { -+ /* --- EEPROM VALUES --- */ - /* Starting pwr/pddac values */ -- s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; -- u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; -+ s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; -+ u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; - /* (pwr,pddac) points */ -- s8 pwr[AR5K_EEPROM_N_PD_GAINS] -- [AR5K_EEPROM_N_PD_POINTS]; -- u8 pddac[AR5K_EEPROM_N_PD_GAINS] -- [AR5K_EEPROM_N_PD_POINTS]; -+ s8 pwr[AR5K_EEPROM_N_PD_GAINS] -+ [AR5K_EEPROM_N_PD_POINTS]; -+ u8 pddac[AR5K_EEPROM_N_PD_GAINS] -+ [AR5K_EEPROM_N_PD_POINTS]; -+ -+ /* --- RAW VALUES --- */ -+ struct ath5k_pdgain_info pdgains -+ [AR5K_EEPROM_N_PD_GAINS]; - }; - - struct ath5k_chan_pcal_info { diff --git a/package/mac80211/patches/202-ath5k_txpower_2413.patch b/package/mac80211/patches/202-ath5k_txpower_2413.patch deleted file mode 100644 index ddecd9e071..0000000000 --- a/package/mac80211/patches/202-ath5k_txpower_2413.patch +++ /dev/null @@ -1,672 +0,0 @@ -Implement the power curve interpolation, which is required for -proper tx on 2413 and newer RF designs. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> - ---- a/drivers/net/wireless/ath5k/phy.c -+++ b/drivers/net/wireless/ath5k/phy.c -@@ -4,6 +4,7 @@ - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> -+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -1438,31 +1439,449 @@ unsigned int ath5k_hw_get_def_antenna(st - */ - - /* -- * Initialize the tx power table (not fully implemented) -+ * find the lower and upper index of the values in the table surrounding the target value - */ --static void ath5k_txpower_table(struct ath5k_hw *ah, -- struct ieee80211_channel *channel, s16 max_power) -+static void -+ath5k_get_table_index(const u16 *tbl, unsigned int tbl_sz, u16 target, -+ unsigned int idx[2]) - { -- unsigned int i, min, max, n; -- u16 txpower, *rates; -+ const u16 *ti; - -- rates = ah->ah_txpower.txp_rates; -+ if (target < tbl[0]) { -+ idx[0] = idx[1] = 0; -+ return; -+ } -+ -+ if (target > tbl[tbl_sz - 1]) { -+ idx[0] = idx[1] = tbl_sz - 1; -+ return; -+ } -+ -+ /* look for the surrounding values */ -+ for (ti = tbl; ti < &tbl[tbl_sz - 1]; ti++) { -+ -+ /* if the value is equal to the target, set lo = hi = index */ -+ if (*ti == target) { -+ idx[0] = idx[1] = ti - tbl; -+ return; -+ } -+ -+ /* if the target is between the current value and the next one, -+ * set lo = cur, hi = lo + 1 */ -+ if (target < ti[1]) { -+ idx[0] = ti - tbl; -+ idx[1] = idx[0] + 1; -+ return; -+ } -+ } -+} -+ -+/* find the lower and upper frequency info */ -+static void -+ath5k_get_freq_tables(struct ath5k_hw *ah, struct ieee80211_channel *channel, -+ struct ath5k_chan_pcal_info **pcinfo_l, -+ struct ath5k_chan_pcal_info **pcinfo_r, -+ struct ath5k_rate_pcal_info *rates) -+{ -+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; -+ struct ath5k_chan_pcal_info *pcinfo; -+ unsigned int idx_l, idx_r; -+ int mode, max, i; -+ unsigned int target = channel->center_freq; -+ struct ath5k_rate_pcal_info *rpinfo; -+ -+ if (!(channel->hw_value & CHANNEL_OFDM)) { -+ pcinfo = ee->ee_pwr_cal_b; -+ rpinfo = ee->ee_rate_tpwr_b; -+ mode = AR5K_EEPROM_MODE_11B; -+ } else if (channel->hw_value & CHANNEL_2GHZ) { -+ pcinfo = ee->ee_pwr_cal_g; -+ rpinfo = ee->ee_rate_tpwr_g; -+ mode = AR5K_EEPROM_MODE_11G; -+ } else { -+ pcinfo = ee->ee_pwr_cal_a; -+ rpinfo = ee->ee_rate_tpwr_a; -+ mode = AR5K_EEPROM_MODE_11A; -+ } -+ max = ee->ee_n_piers[mode] - 1; -+ -+ if (target < pcinfo[0].freq) { -+ idx_l = idx_r = 0; -+ goto done; -+ } -+ -+ if (target > pcinfo[max].freq) { -+ idx_l = idx_r = max; -+ goto done; -+ } -+ -+ /* look for the surrounding values */ -+ for (i = 0; i <= max; i++) { -+ -+ /* if the value is equal to the target, set lo = hi = index */ -+ if (pcinfo[i].freq == target) { -+ idx_l = idx_r = i; -+ goto done; -+ } -+ -+ /* if the target is between the current value and the next one, -+ * set lo = cur, hi = lo + 1 */ -+ if (target < pcinfo[i].freq) { -+ idx_l = i; -+ idx_r = idx_l + 1; -+ goto done; -+ } -+ } -+ -+done: -+ *pcinfo_l = &pcinfo[idx_l]; -+ *pcinfo_r = &pcinfo[idx_r]; -+ -+ if (!rates) -+ return; -+ -+ /* rate info minimum values */ -+ rates->freq = channel->center_freq; -+ rates->target_power_6to24 = -+ min(rpinfo[idx_l].target_power_6to24, -+ rpinfo[idx_r].target_power_6to24); -+ rates->target_power_36 = -+ min(rpinfo[idx_l].target_power_36, -+ rpinfo[idx_r].target_power_36); -+ rates->target_power_48 = -+ min(rpinfo[idx_l].target_power_48, -+ rpinfo[idx_r].target_power_48); -+ rates->target_power_54 = -+ min(rpinfo[idx_l].target_power_54, -+ rpinfo[idx_r].target_power_54); -+} -+ -+ -+/* Fill the VPD table for all indices between pmin and pmax */ -+static void -+ath5k_fill_vpdtable(s16 pmin, s16 pmax, const s16 *pwr, -+ const u16 *vpd, unsigned int intercepts, -+ u16 vpdtable[AR5K_EEPROM_POWER_TABLE_SIZE]) -+{ -+ unsigned int idx[2] = { 0, 0 }; -+ s16 cur_pwr = 2 * pmin; -+ int i; -+ -+ if (intercepts < 2) -+ return; -+ -+ for(i = 0; i <= (pmax - pmin); i++) { -+ ath5k_get_table_index(pwr, intercepts, cur_pwr, idx); -+ -+ if (!idx[1]) -+ idx[1] = 1; -+ -+ if (idx[0] == intercepts - 1) -+ idx[0] = intercepts - 2; -+ -+ if (pwr[idx[0]] == pwr[idx[1]]) -+ vpdtable[i] = vpd[idx[0]]; -+ else -+ vpdtable[i] = (((cur_pwr - pwr[idx[0]]) * vpd[idx[1]] + -+ (pwr[idx[1]] - cur_pwr) * vpd[idx[0]]) / -+ (pwr[idx[1]] - pwr[idx[0]])); -+ -+ cur_pwr += 2; -+ } -+} -+ -+static inline s16 -+ath5k_interpolate_signed(u16 ref, u16 ref_l, u16 ref_r, s16 val_l, s16 val_r) -+{ -+ if (ref_l == ref_r) -+ return val_l; -+ -+ return ((ref - ref_l)*val_r + (ref_r - ref)*val_l) / (ref_r - ref_l); -+} -+ -+static inline s16 -+ath5k_get_min_power_2413(struct ath5k_chan_pcal_info *pcinfo) -+{ -+ struct ath5k_pdgain_info *pd; -+ int i; -+ -+ /* backwards - highest pdgain == lowest power */ -+ for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) { -+ pd = &pcinfo->rf2413_info.pdgains[i]; -+ if (!pd->n_vpd) -+ continue; -+ -+ return pd->pwr_t4[0]; -+ } -+ return 0; -+} -+ -+static inline s16 -+ath5k_get_max_power_2413(struct ath5k_chan_pcal_info *pcinfo) -+{ -+ struct ath5k_pdgain_info *pd; -+ int i; -+ -+ /* forwards: lowest pdgain == highest power */ -+ for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) { -+ pd = &pcinfo->rf2413_info.pdgains[i]; -+ if (!pd->n_vpd) -+ continue; -+ -+ return pd->pwr_t4[pd->n_vpd]; -+ } -+ return 0; -+} -+ -+ -+ -+static int -+ath5k_txpower_table_2413(struct ath5k_hw *ah, struct ieee80211_channel *ch, -+ struct ath5k_chan_pcal_info *pcinfo_l, -+ struct ath5k_chan_pcal_info *pcinfo_r) -+{ -+ struct ath5k_pdgain_info *pd_l, *pd_r; -+ u16 gain_boundaries[4]; -+ u16 *xpd = ah->ah_txpower.txp_xpd; -+ int n_xpd = 0; -+ s16 pmin_t2[AR5K_EEPROM_N_PD_GAINS]; -+ s16 pmax_t2[AR5K_EEPROM_N_PD_GAINS]; -+ u16 *pdadc_out = ah->ah_txpower.txp_pcdac; -+ unsigned int gain_overlap; -+ unsigned int vpd_size, target_idx, max_idx; -+ unsigned int n_pdadc = 0; -+ u16 vpd_step; -+ u16 *pcdacL; -+ u16 *pcdacR; -+ int i, j, s; -+ u32 reg; -+ s16 ch_pmin, ch_pmax; -+ -+ gain_overlap = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) & -+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP; -+ -+ /* loop backwards over pdgains (highest pdgain == lowest power) */ -+ for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) { -+ pd_l = &pcinfo_l->rf2413_info.pdgains[i]; -+ pd_r = &pcinfo_r->rf2413_info.pdgains[i]; -+ pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[n_xpd]; -+ pcdacR = ah->ah_txpower.txp_rfdata.rf2413.pcdacR[n_xpd]; -+ -+ if (!pd_l->n_vpd) -+ continue; -+ -+ xpd[n_xpd] = i; -+ -+ pmin_t2[n_xpd] = min(pd_l->pwr_t4[0], pd_r->pwr_t4[0]) / 2; -+ pmax_t2[n_xpd] = min(pd_l->pwr_t4[pd_l->n_vpd - 1], -+ pd_r->pwr_t4[pd_r->n_vpd - 1]) / 2; -+ -+ if ((u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]) > 64) -+ continue; -+ -+ /* fill vpd tables for left and right frequency info */ -+ ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd], -+ pd_l->pwr_t4, pd_l->vpd, pd_l->n_vpd, pcdacL); -+ -+ /* check if interpolation is necessary */ -+ if (pcinfo_l == pcinfo_r) -+ continue; -+ -+ ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd], -+ pd_r->pwr_t4, pd_r->vpd, pd_r->n_vpd, pcdacR); -+ -+ /* interpolate pcdac values, -+ * reuse pcdacL table for interpolation output */ -+ for (j = 0; j < (u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]); j++) { -+ pcdacL[j] = ath5k_interpolate_signed(ch->center_freq, -+ pcinfo_l->freq, pcinfo_r->freq, -+ (s16) pcdacL[j], (s16) pcdacR[j]); -+ } -+ n_xpd++; -+ } -+ -+ if (!n_xpd) -+ return 0; -+ -+ /* create final table */ -+ for (i = 0, n_pdadc = 0; i < n_xpd; i++) { -+ pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[i]; -+ -+ if (i == n_xpd - 1) { -+ /* 2 db boundary stretch */ -+ gain_boundaries[i] = pmax_t2[i] + 4; -+ } else { -+ gain_boundaries[i] = (pmax_t2[i] + pmin_t2[i + 1]) / 2; -+ } -+ -+ if (gain_boundaries[i] > AR5K_TUNE_MAX_TXPOWER) -+ gain_boundaries[i] = AR5K_TUNE_MAX_TXPOWER; -+ -+ /* find starting index */ -+ if (i == 0) -+ s = 0; -+ else -+ s = (gain_boundaries[i - 1] - pmin_t2[i]) - -+ gain_overlap; -+ -+ if (pcdacL[1] > pcdacL[0]) -+ vpd_step = pcdacL[1] - pcdacL[0]; -+ else -+ vpd_step = 1; -+ -+ /* if s is below 0, we need to extrapolate below this pdgain */ -+ while ((s < 0) && (n_pdadc < 128)) { -+ s16 tmp = pcdacL[0] + s * vpd_step; -+ pdadc_out[n_pdadc++] = (u16) ((tmp < 0) ? 0 : tmp); -+ s++; -+ } -+ -+ vpd_size = pmax_t2[i] - pmin_t2[i]; -+ target_idx = gain_boundaries[i] + gain_overlap - pmin_t2[i]; -+ max_idx = (target_idx < vpd_size) ? target_idx : vpd_size; -+ -+ while ((s < (s16) max_idx) && (n_pdadc < 128)) -+ pdadc_out[n_pdadc++] = pcdacL[s++]; -+ -+ /* need to extrapolate above this pdgain? */ -+ if (target_idx <= max_idx) -+ continue; - -- txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2; -- if (max_power > txpower) -- txpower = max_power > AR5K_TUNE_MAX_TXPOWER ? -- AR5K_TUNE_MAX_TXPOWER : max_power; -+ if (pcdacL[vpd_size - 1] > pcdacL[vpd_size - 2]) -+ vpd_step = pcdacL[vpd_size - 1] - pcdacL[vpd_size - 2]; -+ else -+ vpd_step = 1; - -- for (i = 0; i < AR5K_MAX_RATES; i++) -- rates[i] = txpower; -+ while ((s < (s16) target_idx) && (n_pdadc < 128)) { -+ int tmp = pcdacL[vpd_size - 1] + -+ (s - max_idx) * vpd_step; -+ pdadc_out[n_pdadc++] = (tmp > 127) ? 127 : tmp; -+ s++; -+ } -+ } - -- /* XXX setup target powers by rate */ -+ while (i < AR5K_EEPROM_N_PD_GAINS) { -+ gain_boundaries[i] = gain_boundaries[i - 1]; -+ i++; -+ } -+ -+ while (n_pdadc < 128) { -+ pdadc_out[n_pdadc] = pdadc_out[n_pdadc - 1]; -+ n_pdadc++; -+ } -+ -+ /* select the right xpdgain curves */ -+ reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1); -+ reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 | -+ AR5K_PHY_TPC_RG1_PDGAIN_2 | -+ AR5K_PHY_TPC_RG1_PDGAIN_3 | -+ AR5K_PHY_TPC_RG1_NUM_PD_GAIN); -+ reg |= AR5K_REG_SM(n_xpd, AR5K_PHY_TPC_RG1_NUM_PD_GAIN); -+ switch(n_xpd) { -+ case 3: -+ reg |= AR5K_REG_SM(xpd[2], AR5K_PHY_TPC_RG1_PDGAIN_3); -+ /* fall through */ -+ case 2: -+ reg |= AR5K_REG_SM(xpd[1], AR5K_PHY_TPC_RG1_PDGAIN_2); -+ /* fall through */ -+ case 1: -+ reg |= AR5K_REG_SM(xpd[0], AR5K_PHY_TPC_RG1_PDGAIN_1); -+ break; -+ } -+ ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1); - -+ /* -+ * Write TX power values -+ */ -+ reg = AR5K_PHY_PDADC_TXPOWER_BASE; -+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { -+ ath5k_hw_reg_write(ah, -+ ((pdadc_out[4*i + 0] & 0xff) << 0) | -+ ((pdadc_out[4*i + 1] & 0xff) << 8) | -+ ((pdadc_out[4*i + 2] & 0xff) << 16) | -+ ((pdadc_out[4*i + 3] & 0xff) << 24), reg); -+ reg += 4; -+ } -+ -+ ath5k_hw_reg_write(ah, -+ AR5K_REG_SM(gain_overlap, -+ AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) | -+ AR5K_REG_SM(gain_boundaries[0], -+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) | -+ AR5K_REG_SM(gain_boundaries[1], -+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) | -+ AR5K_REG_SM(gain_boundaries[2], -+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) | -+ AR5K_REG_SM(gain_boundaries[3], -+ AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4), -+ AR5K_PHY_TPC_RG5); -+ -+ ah->ah_txpower.txp_offset = pmin_t2[0]; -+ -+ /* look up power boundaries for this channel */ -+ ch_pmin = ath5k_get_min_power_2413(pcinfo_l); -+ ch_pmax = ath5k_get_max_power_2413(pcinfo_l); -+ -+ if (pcinfo_l != pcinfo_r) { -+ s16 pwr_r; -+ -+ pwr_r = ath5k_get_min_power_2413(pcinfo_r); -+ ch_pmin = ath5k_interpolate_signed(ch->center_freq, -+ pcinfo_l->freq, pcinfo_r->freq, -+ ch_pmin, pwr_r); -+ -+ pwr_r = ath5k_get_max_power_2413(pcinfo_r); -+ ch_pmax = ath5k_interpolate_signed(ch->center_freq, -+ pcinfo_l->freq, pcinfo_r->freq, -+ ch_pmax, pwr_r); -+ } -+ ah->ah_txpower.txp_min = ch_pmin; -+ ah->ah_txpower.txp_max = ch_pmax; -+ -+ return 0; -+} -+ -+static void -+ath5k_setup_rate_table(struct ath5k_hw *ah, u16 max_pwr, -+ struct ath5k_rate_pcal_info *rate_info) -+{ -+ unsigned int i; -+ u16 *rates; -+ -+ max_pwr *= 2; -+ max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max); -+ -+ /* apply rate limits */ -+ rates = ah->ah_txpower.txp_rates; -+ for (i = 0; i < 5; i++) { -+ rates[i] = min(max_pwr, rate_info->target_power_6to24); -+ } -+ rates[5] = min(rates[0], rate_info->target_power_36); -+ rates[6] = min(rates[0], rate_info->target_power_48); -+ rates[7] = min(rates[0], rate_info->target_power_54); -+ rates[8] = min(rates[0], rate_info->target_power_6to24); -+ rates[9] = min(rates[0], rate_info->target_power_36); -+ rates[10] = min(rates[0], rate_info->target_power_36); -+ rates[11] = min(rates[0], rate_info->target_power_48); -+ rates[12] = min(rates[0], rate_info->target_power_48); -+ rates[13] = min(rates[0], rate_info->target_power_54); -+ rates[14] = min(rates[0], rate_info->target_power_54); -+ -+ ah->ah_txpower.txp_tpc = max_pwr; - ah->ah_txpower.txp_min = rates[7]; -- ah->ah_txpower.txp_max = rates[0]; -- ah->ah_txpower.txp_ofdm = rates[0]; -+ ah->ah_txpower.txp_max = min(ah->ah_txpower.txp_max, -+ (s16) rate_info->target_power_36); -+ ah->ah_txpower.txp_ofdm = ah->ah_txpower.txp_max; -+} -+ -+static int -+ath5k_txpower_table(struct ath5k_hw *ah, struct ieee80211_channel *ch, -+ struct ath5k_chan_pcal_info *pcinfo_l, -+ struct ath5k_chan_pcal_info *pcinfo_r, -+ u16 max_pwr) -+{ -+ unsigned int i, min, max, n; - -- /* Calculate the power table */ - n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac); - min = AR5K_EEPROM_PCDAC_START; - max = AR5K_EEPROM_PCDAC_STOP; -@@ -1473,51 +1892,64 @@ static void ath5k_txpower_table(struct a - #else - min; - #endif -+ -+ /* -+ * Write TX power values -+ */ -+ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { -+ ath5k_hw_reg_write(ah, -+ ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | -+ 0xff) & 0xffff) << 16) | -+ (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | -+ 0xff) & 0xffff), -+ AR5K_PHY_PCDAC_TXPOWER(i)); -+ } -+ return 0; - } - -+ - /* - * Set transmition power - */ --int /*O.K. - txpower_table is unimplemented so this doesn't work*/ -+int - ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int txpower) - { -+ struct ath5k_chan_pcal_info *pcinfo_l, *pcinfo_r; -+ struct ath5k_rate_pcal_info rate_info; - bool tpc = ah->ah_txpower.txp_tpc; -- unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - if (txpower > AR5K_TUNE_MAX_TXPOWER) { - ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); - return -EINVAL; - } -- -- /* -- * RF2413 for some reason can't -- * transmit anything if we call -- * this funtion, so we skip it -- * until we fix txpower. -- * -- * XXX: Assume same for RF2425 -- * to be safe. -- */ -- if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425)) -- return 0; -+ if (txpower == 0) -+ txpower = AR5K_TUNE_MAX_TXPOWER; - - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = tpc; -+ ah->ah_txpower.txp_min = 0; -+ ah->ah_txpower.txp_max = AR5K_TUNE_MAX_TXPOWER; - -- /* Initialize TX power table */ -- ath5k_txpower_table(ah, channel, txpower); -+ /* find matching frequency info */ -+ ath5k_get_freq_tables(ah, channel, &pcinfo_l, &pcinfo_r, &rate_info); -+ ath5k_setup_rate_table(ah, txpower, &rate_info); - -- /* -- * Write TX power values -- */ -- for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { -- ath5k_hw_reg_write(ah, -- ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) | -- (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff), -- AR5K_PHY_PCDAC_TXPOWER(i)); -+ /* Initialize TX power table */ -+ switch(ah->ah_radio) { -+ case AR5K_RF2413: -+ case AR5K_RF5413: -+ ath5k_txpower_table_2413(ah, channel, pcinfo_l, pcinfo_r); -+ break; -+ case AR5K_RF2425: -+ /* unimplemented */ -+ return 0; -+ default: -+ /* Default power table */ -+ ath5k_txpower_table(ah, channel, pcinfo_l, pcinfo_r, txpower); -+ break; - } - - ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | -@@ -1536,12 +1968,19 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st - AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | - AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); - -- if (ah->ah_txpower.txp_tpc) -+ if (ah->ah_txpower.txp_tpc) { - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); -- else -+ -+ ath5k_hw_reg_write(ah, -+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) | -+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) | -+ AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), -+ AR5K_TPC); -+ } else { - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); -+ } - - return 0; - } ---- a/drivers/net/wireless/ath5k/ath5k.h -+++ b/drivers/net/wireless/ath5k/ath5k.h -@@ -204,7 +204,7 @@ - #define AR5K_TUNE_CWMAX_11B 1023 - #define AR5K_TUNE_CWMAX_XR 7 - #define AR5K_TUNE_NOISE_FLOOR -72 --#define AR5K_TUNE_MAX_TXPOWER 60 -+#define AR5K_TUNE_MAX_TXPOWER 63 - #define AR5K_TUNE_DEFAULT_TXPOWER 30 - #define AR5K_TUNE_TPC_TXPOWER true - #define AR5K_TUNE_ANT_DIVERSITY true -@@ -1085,11 +1085,23 @@ struct ath5k_hw { - struct ath5k_gain ah_gain; - u8 ah_offset[AR5K_MAX_RF_BANKS]; - -+ - struct { -- u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; -+ union { -+ struct { -+ /* Temporary PCDAC tables for interpolation */ -+ u16 pcdacL[AR5K_EEPROM_N_PD_GAINS] -+ [AR5K_EEPROM_POWER_TABLE_SIZE]; -+ u16 pcdacR[AR5K_EEPROM_N_PD_GAINS] -+ [AR5K_EEPROM_POWER_TABLE_SIZE]; -+ } rf2413; -+ } txp_rfdata; -+ u16 txp_xpd[AR5K_EEPROM_N_XPD_PER_CHANNEL]; -+ u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; - u16 txp_rates[AR5K_MAX_RATES]; - s16 txp_min; - s16 txp_max; -+ s16 txp_offset; - bool txp_tpc; - s16 txp_ofdm; - } ah_txpower; ---- a/drivers/net/wireless/ath5k/reg.h -+++ b/drivers/net/wireless/ath5k/reg.h -@@ -1552,6 +1552,15 @@ - - - /*===5212 Specific PCU registers===*/ -+#define AR5K_TPC 0x80e8 -+#define AR5K_TPC_ACK 0x0000003f /* ack frames */ -+#define AR5K_TPC_ACK_S 0 -+#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ -+#define AR5K_TPC_CTS_S 8 -+#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ -+#define AR5K_TPC_CHIRP_S 16 -+#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ -+#define AR5K_TPC_DOPPLER_S 24 - - /* - * XR (eXtended Range) mode register -@@ -2550,6 +2559,12 @@ - #define AR5K_PHY_TPC_RG1 0xa258 - #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 - #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 -+#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 -+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 -+#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 -+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 -+#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 -+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 - - #define AR5K_PHY_TPC_RG5 0xa26C - #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F ---- a/drivers/net/wireless/ath5k/desc.c -+++ b/drivers/net/wireless/ath5k/desc.c -@@ -194,6 +194,10 @@ static int ath5k_hw_setup_4word_tx_desc( - return -EINVAL; - } - -+ tx_power += ah->ah_txpower.txp_offset; -+ if (tx_power > AR5K_TUNE_MAX_TXPOWER) -+ tx_power = AR5K_TUNE_MAX_TXPOWER; -+ - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); - diff --git a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch new file mode 100644 index 0000000000..91f5a2ad82 --- /dev/null +++ b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch @@ -0,0 +1,150 @@ +From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Sat, 14 Mar 2009 20:02:51 +0100 +Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci + +pci_dev->irq and pci_name(pci_dev) access should be limited +to rt2x00pci only. This is more generic and allows a rt2x00 pci +driver to be controlled as PCI device but also as platform driver +(needed for rt2800pci SoC support). + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- + drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- + drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++---- + drivers/net/wireless/rt2x00/rt61pci.c | 7 +------ + 5 files changed, 33 insertions(+), 12 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2400pci.c ++++ b/drivers/net/wireless/rt2x00/rt2400pci.c +@@ -1361,7 +1361,7 @@ static int rt2400pci_init_eeprom(struct + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, CSR0, ®); +- rt2x00_set_chip(rt2x00dev, RT2460, value, reg); ++ rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && + !rt2x00_rf(&rt2x00dev->chip, RF2421)) { +--- a/drivers/net/wireless/rt2x00/rt2500pci.c ++++ b/drivers/net/wireless/rt2x00/rt2500pci.c +@@ -1525,7 +1525,7 @@ static int rt2500pci_init_eeprom(struct + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, CSR0, ®); +- rt2x00_set_chip(rt2x00dev, RT2560, value, reg); ++ rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && + !rt2x00_rf(&rt2x00dev->chip, RF2523) && +--- a/drivers/net/wireless/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/rt2x00/rt2x00.h +@@ -672,6 +672,12 @@ struct rt2x00_dev { + unsigned long flags; + + /* ++ * Device information, Bus IRQ and name (PCI, SoC) ++ */ ++ int irq; ++ const char *name; ++ ++ /* + * Chipset identification. + */ + struct rt2x00_chip chip; +@@ -860,6 +866,18 @@ static inline void rt2x00_set_chip(struc + rt2x00dev->chip.rev = rev; + } + ++static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev, ++ const u16 rt) ++{ ++ rt2x00dev->chip.rt = rt; ++} ++ ++static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev, ++ const u16 rf, const u32 rev) ++{ ++ rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev); ++} ++ + static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip) + { + return (chipset->rt == chip); +--- a/drivers/net/wireless/rt2x00/rt2x00pci.c ++++ b/drivers/net/wireless/rt2x00/rt2x00pci.c +@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(str + + int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) + { +- struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); + struct data_queue *queue; + int status; + +@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_d + /* + * Register interrupt handler. + */ +- status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler, +- IRQF_SHARED, pci_name(pci_dev), rt2x00dev); ++ status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler, ++ IRQF_SHARED, rt2x00dev->name, rt2x00dev); + if (status) { + ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", +- pci_dev->irq, status); ++ rt2x00dev->irq, status); + goto exit; + } + +@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_ + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; ++ u16 chip; + + retval = pci_request_regions(pci_dev, pci_name(pci_dev)); + if (retval) { +@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_ + rt2x00dev->dev = &pci_dev->dev; + rt2x00dev->ops = ops; + rt2x00dev->hw = hw; ++ rt2x00dev->irq = pci_dev->irq; ++ rt2x00dev->name = pci_name(pci_dev); ++ ++ /* ++ * Determine RT chipset by reading PCI header. ++ */ ++ pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip); ++ rt2x00_set_chip_rt(rt2x00dev, chip); + + retval = rt2x00pci_alloc_reg(rt2x00dev); + if (retval) +--- a/drivers/net/wireless/rt2x00/rt61pci.c ++++ b/drivers/net/wireless/rt2x00/rt61pci.c +@@ -2308,7 +2308,6 @@ static int rt61pci_init_eeprom(struct rt + u32 reg; + u16 value; + u16 eeprom; +- u16 device; + + /* + * Read EEPROM word for configuration. +@@ -2317,14 +2316,10 @@ static int rt61pci_init_eeprom(struct rt + + /* + * Identify RF chipset. +- * To determine the RT chip we have to read the +- * PCI header of the device. + */ +- pci_read_config_word(to_pci_dev(rt2x00dev->dev), +- PCI_CONFIG_HEADER_DEVICE, &device); + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); +- rt2x00_set_chip(rt2x00dev, device, value, reg); ++ rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && + !rt2x00_rf(&rt2x00dev->chip, RF5325) && diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch index 54361a97a2..6106789c3f 100644 --- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch +++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch @@ -1,6 +1,6 @@ -From 48eba0e802443d417a4b011202f956b9e5a74bfb Mon Sep 17 00:00:00 2001 +From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 3 Mar 2009 19:14:51 +0100 +Date: Sat, 14 Mar 2009 20:06:48 +0100 Subject: [PATCH] rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch index cfb8a97e54..9cd2289e06 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch @@ -1,6 +1,6 @@ -From b11cae133872a0ff531a1d2646f1e46378510fe0 Mon Sep 17 00:00:00 2001 +From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 3 Mar 2009 19:18:56 +0100 +Date: Sat, 14 Mar 2009 20:41:58 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800pci Add support for the rt2800pci chipset. @@ -15,10 +15,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/Kconfig | 15 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 2831 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800pci.h | 1867 ++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2x00.h | 4 + - 5 files changed, 4718 insertions(+), 0 deletions(-) + drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2x00.h | 6 + + 5 files changed, 4937 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h @@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> obj-$(CONFIG_RT73USB) += rt73usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -0,0 +1,2831 @@ +@@ -0,0 +1,3035 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> @@ -67,12 +67,21 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> ++#include <linux/platform_device.h> +#include <linux/eeprom_93cx6.h> + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt2800pci.h" + ++/* FIXME: Make Kconfig dependent */ ++#ifdef CONFIG_PCI ++#define CONFIG_RT2800PCI_PCI ++#endif ++#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) ++#define CONFIG_RT2800PCI_WISOC ++#endif ++ +/* + * Allow hardware encryption to be disabled. + */ @@ -208,6 +217,44 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + mutex_unlock(&rt2x00dev->csr_mutex); +} + ++static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) ++{ ++ unsigned int i; ++ u32 reg; ++ ++ for (i = 0; i < 200; i++) { ++ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); ++ ++ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || ++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || ++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || ++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) ++ break; ++ ++ udelay(REGISTER_BUSY_DELAY); ++ } ++ ++ if (i == 200) ++ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n"); ++ ++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); ++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); ++} ++ ++#ifdef CONFIG_RT2800PCI_WISOC ++static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) ++{ ++ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ ++ ++ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); ++} ++#else ++static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) ++{ ++} ++#endif /* CONFIG_RT2800PCI_WISOC */ ++ ++#ifdef CONFIG_RT2800PCI_PCI +static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; @@ -238,6 +285,32 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); +} + ++static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) ++{ ++ struct eeprom_93cx6 eeprom; ++ u32 reg; ++ ++ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); ++ ++ eeprom.data = rt2x00dev; ++ eeprom.register_read = rt2800pci_eepromregister_read; ++ eeprom.register_write = rt2800pci_eepromregister_write; ++ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? ++ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; ++ eeprom.reg_data_in = 0; ++ eeprom.reg_data_out = 0; ++ eeprom.reg_data_clock = 0; ++ eeprom.reg_chip_select = 0; ++ ++ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, ++ EEPROM_SIZE / sizeof(u16)); ++} ++#else ++static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) ++{ ++} ++#endif /* CONFIG_RT2800PCI_PCI */ ++ +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +static const struct rt2x00debug rt2800pci_rt2x00debug = { + .owner = THIS_MODULE, @@ -372,10 +445,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00pci_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, ++ (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); @@ -429,10 +503,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ -+ field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1)); ++ field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + -+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2); ++ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); ++ + rt2x00pci_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); @@ -456,9 +531,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID -+ * equals our hw_key_idx. ++ * equals our hw_key_idx. Make sure the WCID starts _after_ the ++ * last possible shared key entry. + */ -+ key->hw_key_idx = crypto->aid; ++ if (crypto->aid > (256 - 32)) ++ return -ENOSPC; ++ ++ key->hw_key_idx = 32 + crypto->aid; ++ + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); @@ -929,9 +1009,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + -+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0); ++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } else { -+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); ++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); @@ -1530,8 +1610,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ -+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0x00000000); -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0x00000000); ++ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0); ++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { @@ -1747,9 +1827,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +{ + rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + -+ if (state == STATE_AWAKE) -+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); -+ else ++ if (state == STATE_AWAKE) { ++ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); ++ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); ++ } else + rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + + return 0; @@ -2016,7 +2097,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * decryption. This prevents us from correct providing + * correct statistics through debugfs. + */ -+ rxdesc->cipher = CIPHER_NONE; ++ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); + rxdesc->cipher_status = + rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); + } @@ -2055,7 +2136,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ -+ if (rxdesc->dev_flags == RATE_MODE_CCK) ++ if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + rxdesc->rssi = @@ -2071,7 +2152,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Remove TXWI descriptor from start of buffer. + */ -+ skb_pull(entry->skb, TXWI_DESC_SIZE); ++ skb_pull(entry->skb, RXWI_DESC_SIZE); + skb_trim(entry->skb, rxdesc->size); +} + @@ -2195,26 +2276,22 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ +static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ -+ struct eeprom_93cx6 eeprom; -+ u32 reg; + u16 word; + u8 *mac; + u8 default_lna_gain; + -+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); -+ -+ eeprom.data = rt2x00dev; -+ eeprom.register_read = rt2800pci_eepromregister_read; -+ eeprom.register_write = rt2800pci_eepromregister_write; -+ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? -+ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; -+ eeprom.reg_data_in = 0; -+ eeprom.reg_data_out = 0; -+ eeprom.reg_data_clock = 0; -+ eeprom.reg_chip_select = 0; -+ -+ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, -+ EEPROM_SIZE / sizeof(u16)); ++ /* ++ * Read EEPROM into buffer ++ */ ++ switch(rt2x00dev->chip.rt) { ++ case RT2880: ++ case RT3052: ++ rt2800pci_read_eeprom_soc(rt2x00dev); ++ break; ++ default: ++ rt2800pci_read_eeprom_pci(rt2x00dev); ++ break; ++ } + + /* + * Start validation of the data that has been read. @@ -2320,7 +2397,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + u32 reg; + u16 value; + u16 eeprom; -+ u16 device; + + /* + * Read EEPROM word for configuration. @@ -2329,21 +2405,18 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + + /* + * Identify RF chipset. -+ * To determine the RT chip we have to read the -+ * PCI header of the device. + */ -+ pci_read_config_word(to_pci_dev(rt2x00dev->dev), -+ PCI_CONFIG_HEADER_DEVICE, &device); + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); -+ rt2x00_set_chip(rt2x00dev, device, value, reg); ++ rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF2020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3052)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } @@ -2490,7 +2563,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + if (rt2x00_rf(&rt2x00dev->chip, RF2820) || -+ rt2x00_rf(&rt2x00dev->chip, RF2720)) { ++ rt2x00_rf(&rt2x00dev->chip, RF2720) || ++ rt2x00_rf(&rt2x00dev->chip, RF3052)) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || @@ -2824,6 +2898,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +/* + * RT2800pci module information. + */ ++#ifdef CONFIG_RT2800PCI_PCI +static struct pci_device_id rt2800pci_device_table[] = { + { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, @@ -2835,15 +2910,130 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { 0, } +}; ++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); ++#endif /* CONFIG_RT2800PCI_PCI */ + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); -+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); +MODULE_FIRMWARE(FIRMWARE_RT2860); +MODULE_LICENSE("GPL"); + ++#ifdef CONFIG_RT2800PCI_WISOC ++ ++#ifdef CONFIG_RALINK_RT288X ++#define WSOC_RT_CHIPSET RT2880 ++#endif /* CONFIG_RALINK_RT288X */ ++ ++#ifdef CONFIG_RALINK_RT305X ++#define WSOC_RT_CHIPSET RT3052 ++#endif /* CONFIG_RALINK_RT305X */ ++ ++static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev) ++{ ++ kfree(rt2x00dev->rf); ++ rt2x00dev->rf = NULL; ++ ++ kfree(rt2x00dev->eeprom); ++ rt2x00dev->eeprom = NULL; ++} ++ ++static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev) ++{ ++ struct platform_device *pdev = to_platform_device(rt2x00dev->dev); ++ struct resource *res; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ ERROR_PROBE("Failed to get MMIO resource\n"); ++ return -ENODEV; ++ } ++ ++ rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start); ++ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); ++ if (!rt2x00dev->eeprom) ++ goto exit; ++ ++ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); ++ if (!rt2x00dev->rf) ++ goto exit; ++ ++ return 0; ++ ++exit: ++ ERROR_PROBE("Failed to allocate registers.\n"); ++ rt2800soc_free_reg(rt2x00dev); ++ ++ return -ENOMEM; ++} ++ ++static int rt2800soc_probe(struct platform_device *pdev) ++{ ++ const struct rt2x00_ops *ops = &rt2800pci_ops; ++ struct ieee80211_hw *hw; ++ struct rt2x00_dev *rt2x00dev; ++ int retval; ++ ++ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); ++ if (!hw) { ++ ERROR_PROBE("Failed to allocate hardware.\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, hw); ++ ++ rt2x00dev = hw->priv; ++ rt2x00dev->dev = &pdev->dev; ++ rt2x00dev->ops = ops; ++ rt2x00dev->hw = hw; ++ rt2x00dev->irq = platform_get_irq(pdev, 0); ++ rt2x00dev->name = pdev->dev.driver->name; ++ ++ rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET); ++ ++ retval = rt2800soc_alloc_reg(rt2x00dev); ++ if (retval) ++ goto exit_free_device; ++ ++ retval = rt2x00lib_probe_dev(rt2x00dev); ++ if (retval) ++ goto exit_free_reg; ++ ++ return 0; ++ ++exit_free_reg: ++ rt2800soc_free_reg(rt2x00dev); ++ ++exit_free_device: ++ ieee80211_free_hw(hw); ++ ++ return retval; ++} ++ ++static int rt2800soc_remove(struct platform_device *pdev) ++{ ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ ++ /* ++ * Free all allocated data. ++ */ ++ rt2x00lib_remove_dev(rt2x00dev); ++ rt2800soc_free_reg(rt2x00dev); ++ ieee80211_free_hw(hw); ++ ++ return 0; ++} ++ ++static struct platform_driver rt2800soc_driver = { ++ .driver.name = "rt2800_wmac", ++ .probe = rt2800soc_probe, ++ .remove = rt2800soc_remove, ++}; ++#endif /* CONFIG_RT2800PCI_WISOC */ ++ ++#ifdef CONFIG_RT2800PCI_PCI +static struct pci_driver rt2800pci_driver = { + .name = KBUILD_MODNAME, + .id_table = rt2800pci_device_table, @@ -2852,22 +3042,36 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; ++#endif /* CONFIG_RT2800PCI_PCI */ + +static int __init rt2800pci_init(void) +{ -+ return pci_register_driver(&rt2800pci_driver); ++ int ret = 0; ++ ++#ifdef CONFIG_RT2800PCI_WISOC ++ ret = platform_driver_register(&rt2800soc_driver); ++#endif ++#ifdef CONFIG_RT2800PCI_PCI ++ ret = pci_register_driver(&rt2800pci_driver); ++#endif ++ return ret; +} + +static void __exit rt2800pci_exit(void) +{ ++#ifdef CONFIG_RT2800PCI_PCI + pci_unregister_driver(&rt2800pci_driver); ++#endif ++#ifdef CONFIG_RT2800PCI_WISOC ++ platform_driver_unregister(&rt2800soc_driver); ++#endif +} + +module_init(rt2800pci_init); +module_exit(rt2800pci_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -0,0 +1,1867 @@ +@@ -0,0 +1,1880 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> @@ -2906,6 +3110,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G ++ * RF3052 2.4G 2T2R + */ +#define RF2820 0x0001 +#define RF2850 0x0002 @@ -2913,6 +3118,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define RF2750 0x0004 +#define RF3020 0x0005 +#define RF2020 0x0006 ++#define RF3052 0x0008 + +/* + * RT2860 version @@ -4233,6 +4439,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * H2M_MAILBOX_CID: + */ +#define H2M_MAILBOX_CID 0x7014 ++#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) ++#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) ++#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) ++#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) + +/* + * H2M_MAILBOX_STATUS: @@ -4530,6 +4740,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 ++#define MCU_RADIO_OFF 0x35 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x51 +#define MCU_LED_1 0x52 @@ -4537,6 +4748,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define MCU_LED_3 0x54 +#define MCU_RADAR 0x60 +#define MCU_BOOT_SIGNAL 0x72 ++#define MCU_BBP_SIGNAL 0x80 ++ ++/* ++ * MCU mailbox tokens ++ */ ++#define TOKEN_WAKUP 3 + +/* + * DMA descriptor defines. @@ -4737,7 +4954,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#endif /* RT2800PCI_H */ --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -138,6 +138,10 @@ struct rt2x00_chip { +@@ -138,6 +138,12 @@ struct rt2x00_chip { #define RT2561 0x0302 #define RT2661 0x0401 #define RT2571 0x1300 @@ -4745,6 +4962,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */ +#define RT2890 0x0701 /* 2.4GHz PCIe */ +#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */ ++#define RT2880 0x2880 /* WSOC */ ++#define RT3052 0x3052 /* WSOC */ u16 rf; u32 rev; diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch index 7a25490195..c9152fd366 100644 --- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch +++ b/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch @@ -1,6 +1,6 @@ -From b249bc450f982cd2491448c91faf797ed37b69b8 Mon Sep 17 00:00:00 2001 +From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 3 Mar 2009 19:25:49 +0100 +Date: Sat, 14 Mar 2009 20:46:40 +0100 Subject: [PATCH] rt2x00: Implement support for rt2800usb Add support for the rt2800usb chipset. @@ -16,9 +16,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800usb.h | 1932 ++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 7 + - 5 files changed, 4986 insertions(+), 0 deletions(-) + 5 files changed, 4988 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h @@ -397,10 +397,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, ++ (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); ++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2x00usb_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); @@ -459,10 +460,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ -+ field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1)); ++ field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + -+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2); ++ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + rt2x00usb_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, @@ -488,9 +489,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID -+ * equals our hw_key_idx. ++ * equals our hw_key_idx. Make sure the WCID starts _after_ the ++ * last possible shared key entry. + */ -+ key->hw_key_idx = crypto->aid; ++ if (crypto->aid > (256 - 32)) ++ return -ENOSPC; ++ ++ key->hw_key_idx = 32 + crypto->aid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); @@ -2183,12 +2188,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { -+ /* -+ * Unfortunately we don't know the cipher type used during -+ * decryption. This prevents us from correct providing -+ * correct statistics through debugfs. -+ */ -+ rxdesc->cipher = CIPHER_NONE; ++ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); + rxdesc->cipher_status = + rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); + } @@ -2227,7 +2227,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ -+ if (rxdesc->dev_flags == RATE_MODE_CCK) ++ if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + rxdesc->rssi = @@ -3066,7 +3066,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +module_exit(rt2800usb_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.h -@@ -0,0 +1,1932 @@ +@@ -0,0 +1,1934 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> @@ -4783,6 +4783,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 ++#define MCU_RADIO_OFF 0x35 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x51 +#define MCU_LED_1 0x52 @@ -4790,6 +4791,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#define MCU_LED_3 0x54 +#define MCU_RADAR 0x60 +#define MCU_BOOT_SIGNAL 0x72 ++#define MCU_BBP_SIGNAL 0x80 + +/* + * DMA descriptor defines. @@ -5001,15 +5003,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +#endif /* RT2800USB_H */ --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -142,6 +142,7 @@ struct rt2x00_chip { - #define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */ - #define RT2890 0x0701 /* 2.4GHz PCIe */ +@@ -144,6 +144,7 @@ struct rt2x00_chip { #define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */ + #define RT2880 0x2880 /* WSOC */ + #define RT3052 0x3052 /* WSOC */ +#define RT2870 0x1600 u16 rf; u32 rev; -@@ -780,6 +781,12 @@ struct rt2x00_dev { +@@ -788,6 +789,12 @@ struct rt2x00_dev { u8 freq_offset; /* diff --git a/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch b/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch deleted file mode 100644 index 898a209504..0000000000 --- a/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch +++ /dev/null @@ -1,35 +0,0 @@ -From f23c3d3175e55ebac81d6e29f1c1415491a78d60 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 3 Mar 2009 20:12:44 +0100 -Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800pci) - -Use UDF field in WCID entry to pass the cipher type -to the RXWI fields. This will allow keeping track of -the number of frames received with a particular cipher type -which is exported through debugfs. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 4 ++-- - 1 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -339,7 +339,7 @@ static void rt2800pci_config_wcid_attr(s - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); -- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00pci_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); -@@ -1980,7 +1980,7 @@ static void rt2800pci_fill_rxdone(struct - * decryption. This prevents us from correct providing - * correct statistics through debugfs. - */ -- rxdesc->cipher = CIPHER_NONE; -+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); - rxdesc->cipher_status = - rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); - } diff --git a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch new file mode 100644 index 0000000000..2bd4eb295b --- /dev/null +++ b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch @@ -0,0 +1,25 @@ +From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Sat, 14 Mar 2009 20:57:27 +0100 +Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt61pci.h | 6 ------ + 1 files changed, 0 insertions(+), 6 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt61pci.h ++++ b/drivers/net/wireless/rt2x00/rt61pci.h +@@ -63,12 +63,6 @@ + */ + + /* +- * PCI Configuration Header +- */ +-#define PCI_CONFIG_HEADER_VENDOR 0x0000 +-#define PCI_CONFIG_HEADER_DEVICE 0x0002 +- +-/* + * HOST_CMD_CSR: For HOST to interrupt embedded processor + */ + #define HOST_CMD_CSR 0x0008 diff --git a/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch b/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch deleted file mode 100644 index 831dda0015..0000000000 --- a/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 35c7358f5f7ba03daeecdf1fdceabd48ebcd029a Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Tue, 3 Mar 2009 20:15:17 +0100 -Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800usb) - -Use UDF field in WCID entry to pass the cipher type -to the RXWI fields. This will allow keeping track of -the number of frames received with a particular cipher type -which is exported through debugfs. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 9 ++------- - 1 files changed, 2 insertions(+), 7 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -366,7 +366,7 @@ static void rt2800usb_config_wcid_attr(s - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); -- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); -@@ -2149,12 +2149,7 @@ static void rt2800usb_fill_rxdone(struct - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { -- /* -- * Unfortunately we don't know the cipher type used during -- * decryption. This prevents us from correct providing -- * correct statistics through debugfs. -- */ -- rxdesc->cipher = CIPHER_NONE; -+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); - rxdesc->cipher_status = - rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); - } diff --git a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch new file mode 100644 index 0000000000..783a6d609e --- /dev/null +++ b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch @@ -0,0 +1,25 @@ +From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Sat, 14 Mar 2009 20:58:12 +0100 +Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.h | 6 ------ + 1 files changed, 0 insertions(+), 6 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.h ++++ b/drivers/net/wireless/rt2x00/rt2800pci.h +@@ -83,12 +83,6 @@ + */ + + /* +- * PCI Configuration Header +- */ +-#define PCI_CONFIG_HEADER_VENDOR 0x0000 +-#define PCI_CONFIG_HEADER_DEVICE 0x0002 +- +-/* + * E2PROM_CSR: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE: 0: 93c46, 1:93c66. diff --git a/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch b/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch deleted file mode 100644 index 1fbef6c434..0000000000 --- a/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch +++ /dev/null @@ -1,36 +0,0 @@ -From e63585e28192e854707c549547645c669e6daa2a Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Wed, 4 Mar 2009 20:25:43 +0100 -Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 8 +++++--- - 1 files changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -336,7 +336,8 @@ static void rt2800pci_config_wcid_attr(s - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, -+ (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); -@@ -393,10 +394,11 @@ static int rt2800pci_config_shared_key(s - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ -- field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1)); -+ field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - -- offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2); -+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); -+ - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); diff --git a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch new file mode 100644 index 0000000000..4f832939c9 --- /dev/null +++ b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch @@ -0,0 +1,32 @@ +From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Sun, 15 Mar 2009 15:13:58 +0100 +Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.c | 9 +++++++++ + 1 files changed, 9 insertions(+), 0 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/rt2x00/rt2800pci.c +@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void) + + #ifdef CONFIG_RT2800PCI_WISOC + ret = platform_driver_register(&rt2800soc_driver); ++ if (ret) ++ return ret; + #endif + #ifdef CONFIG_RT2800PCI_PCI + ret = pci_register_driver(&rt2800pci_driver); ++ if (ret) { ++#ifdef CONFIG_RT2800PCI_WISOC ++ platform_driver_unregister(&rt2800soc_driver); ++#endif ++ return ret; ++ } + #endif ++ + return ret; + } + diff --git a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch new file mode 100644 index 0000000000..d08e5fecfd --- /dev/null +++ b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch @@ -0,0 +1,80 @@ +From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Sun, 15 Mar 2009 15:37:29 +0100 +Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.c | 52 +++++++++++++++++++++++++++++-- + 1 files changed, 49 insertions(+), 3 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/rt2x00/rt2800pci.c +@@ -2934,7 +2934,7 @@ exit: + + static int rt2800soc_probe(struct platform_device *pdev) + { +- const struct rt2x00_ops *ops = &rt2800pci_ops; ++ struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p; + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; +@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf + return 0; + } + ++#ifdef CONFIG_PM ++int rt2x00soc_suspend(struct device *dev, pm_message_t state) ++{ ++ struct ieee80211_hw *hw = dev_get_drvdata(dev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ int retval; ++ ++ retval = rt2x00lib_suspend(rt2x00dev, state); ++ if (retval) ++ return retval; ++ ++ rt2800soc_free_reg(rt2x00dev); ++ ++ return 0; ++} ++ ++int rt2x00soc_resume(struct device *dev) ++{ ++ struct ieee80211_hw *hw = dev_get_drvdata(dev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ int retval; ++ ++ retval = rt2x00soc_alloc_reg(rt2x00dev); ++ if (retval) ++ return retval; ++ ++ retval = rt2x00lib_resume(rt2x00dev); ++ if (retval) ++ goto exit_free_reg; ++ ++ return 0; ++ ++exit_free_reg: ++ rt2x00pci_free_reg(rt2x00dev); ++ ++ return retval; ++} ++#endif /* CONFIG_PM */ ++ + static struct platform_driver rt2800soc_driver = { +- .driver.name = "rt2800_wmac", ++ .driver = { ++ .name = "rt2800_wmac", ++ .owner = THIS_MODULE, ++ .mod_name = KBUILD_MODNAME, ++ .p = &rt2800pci_ops; ++ } + .probe = rt2800soc_probe, +- .remove = rt2800soc_remove, ++ .remove = __devexit_p(rt2800soc_remove), ++ .suspend = rt2x00soc_suspend, ++ .resume = rt2x00soc_resume, + }; + #endif /* CONFIG_RT2800PCI_WISOC */ + diff --git a/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch b/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch deleted file mode 100644 index 11a915e6b6..0000000000 --- a/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch +++ /dev/null @@ -1,35 +0,0 @@ -From d6368d8b77bb8568aa0c92adf1e507fb4198ff41 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Wed, 4 Mar 2009 20:26:27 +0100 -Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800usb) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800usb.c | 7 ++++--- - 1 files changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -363,7 +363,8 @@ static void rt2800usb_config_wcid_attr(s - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, -+ (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); -@@ -425,10 +426,10 @@ static int rt2800usb_config_shared_key(s - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ -- field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1)); -+ field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - -- offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2); -+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, diff --git a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch new file mode 100644 index 0000000000..3bb5c2e0fb --- /dev/null +++ b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch @@ -0,0 +1,535 @@ +From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Mon, 16 Mar 2009 20:16:59 +0100 +Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci) + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.c | 320 +++++++++++++++++++++++++++++-- + drivers/net/wireless/rt2x00/rt2800pci.h | 57 ++++++- + 2 files changed, 361 insertions(+), 16 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/rt2x00/rt2800pci.c +@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har + */ + #define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) ++#define WAIT_FOR_RFCSR(__dev, __reg) \ ++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) + #define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) + #define WAIT_FOR_MCU(__dev, __reg) \ +@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt + mutex_unlock(&rt2x00dev->csr_mutex); + } + ++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, const u8 value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the new data into the register. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); ++ } ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ ++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, u8 *value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the read request into the register. ++ * After the data has been written, we wait until hardware ++ * returns the correct value, if at any time the register ++ * doesn't become available in time, reg will be 0xffffffff ++ * which means we return 0xff to the caller. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); ++ ++ WAIT_FOR_RFCSR(rt2x00dev, ®); ++ } ++ ++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ + static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) + { +@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct + { + u32 reg; + ++ /* ++ * RT2880 and RT3052 don't support MCU requests. ++ */ ++ if (rt2x00_rt(&rt2x00dev->chip, RT2880) || ++ rt2x00_rt(&rt2x00dev->chip, RT3052)) ++ return; ++ + mutex_lock(&rt2x00dev->csr_mutex); + + /* +@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st + rt2x00dev->lna_gain = lna_gain; + } + +-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, +- struct ieee80211_conf *conf, +- struct rf_channel *rf, +- struct channel_info *info) ++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) + { +- u32 reg; +- unsigned int tx_pin; + u16 eeprom; + + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); +@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + +- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); +- } + + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); +@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str + rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); + rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); ++} ++ ++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u8 rfcsr; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1); ++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); ++ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, ++ TXPOWER_G_TO_DEV(info->tx_power1)); ++ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); ++ ++ if (conf_is_ht40(conf)) ++ rt2800pci_rfcsr_write(rt2x00dev, 24, ++ rt2x00dev->calibration_bw40); ++ else ++ rt2800pci_rfcsr_write(rt2x00dev, 24, ++ rt2x00dev->calibration_bw20); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); ++} ++ ++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u32 reg; ++ unsigned int tx_pin; ++ u16 eeprom; ++ u8 bbp; ++ ++ /* ++ * Determine antenna settings from EEPROM ++ */ ++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); ++ else ++ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings +@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str + + rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ rt2800pci_bbp_read(rt2x00dev, 3, &bbp); ++ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); ++ rt2800pci_bbp_write(rt2x00dev, 3, bbp); ++ ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { ++ if (conf_is_ht40(conf)) { ++ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a); ++ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); ++ rt2800pci_bbp_write(rt2x00dev, 73, 0x16); ++ } else { ++ rt2800pci_bbp_write(rt2x00dev, 69, 0x16); ++ rt2800pci_bbp_write(rt2x00dev, 70, 0x08); ++ rt2800pci_bbp_write(rt2x00dev, 73, 0x11); ++ } ++ } ++ + msleep(1); + } + +@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); +- rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0); ++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); + rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); + + /* +@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2 + rt2800pci_bbp_write(rt2x00dev, 91, 0x04); + rt2800pci_bbp_write(rt2x00dev, 92, 0x00); + rt2800pci_bbp_write(rt2x00dev, 103, 0x00); +- rt2800pci_bbp_write(rt2x00dev, 105, 0x05); ++ rt2800pci_bbp_write(rt2x00dev, 105, 0x01); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800pci_bbp_write(rt2x00dev, 69, 0x16); +@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2 + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800pci_bbp_write(rt2x00dev, 84, 0x19); + ++ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { ++ rt2800pci_bbp_write(rt2x00dev, 31, 0x08); ++ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e); ++ rt2800pci_bbp_write(rt2x00dev, 80, 0x08); ++ } ++ + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + +@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2 + return 0; + } + ++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev, ++ bool bw40, u8 rfcsr24, u8 filter_target) ++{ ++ unsigned int i; ++ u8 bbp; ++ u8 rfcsr; ++ u8 passband; ++ u8 stopband; ++ u8 overtuned = 0; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * Set power & frequency of passband test tone ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800pci_bbp_read(rt2x00dev, 55, &passband); ++ if (passband) ++ break; ++ } ++ ++ /* ++ * Set power & frequency of stopband test tone ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0x06); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800pci_bbp_read(rt2x00dev, 55, &stopband); ++ ++ if ((passband - stopband) <= filter_target) { ++ rfcsr24++; ++ overtuned += ((passband - stopband) == filter_target); ++ } else ++ break; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ } ++ ++ rfcsr24 -= !!overtuned; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ return rfcsr24; ++} ++ ++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfcsr; ++ u8 bbp; ++ ++ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3021) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) ++ return 0; ++ ++ /* ++ * Init RF calibration. ++ */ ++ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); ++ msleep(1); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); ++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50); ++ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01); ++ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7); ++ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40); ++ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03); ++ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02); ++ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50); ++ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39); ++ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f); ++ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60); ++ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21); ++ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90); ++ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58); ++ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3); ++ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92); ++ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c); ++ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02); ++ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba); ++ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31); ++ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08); ++ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01); ++ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25); ++ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23); ++ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13); ++ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83); ++ ++ /* ++ * Set RX Filter calibration for 20MHz and 40MHz ++ */ ++ rt2x00dev->calibration_bw20 = ++ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16); ++ rt2x00dev->calibration_bw40 = ++ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19); ++ ++ /* ++ * Set back to initial state ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * set BBP back to BW20 ++ */ ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ return 0; ++} ++ + /* + * Device state switch handlers. + */ +@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct + rt2800pci_init_queues(rt2x00dev) || + rt2800pci_init_registers(rt2x00dev) || + rt2800pci_wait_wpdma_ready(rt2x00dev) || +- rt2800pci_init_bbp(rt2x00dev))) ++ rt2800pci_init_bbp(rt2x00dev) || ++ rt2800pci_init_rfcsr(rt2x00dev))) + return -EIO; + + /* +@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* ++ * Set RX IDX in register to inform hardware that we have handled ++ * this entry and it is available for reuse again. ++ */ ++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); ++ ++ /* + * Remove TXWI descriptor from start of buffer. + */ + skb_pull(entry->skb, RXWI_DESC_SIZE); +@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020) && +- !rt2x00_rf(&rt2x00dev->chip, RF3052)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF3021) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } +@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc + + if (rt2x00_rf(&rt2x00dev->chip, RF2820) || + rt2x00_rf(&rt2x00dev->chip, RF2720) || +- rt2x00_rf(&rt2x00dev->chip, RF3052)) { ++ rt2x00_rf(&rt2x00dev->chip, RF3021) || ++ rt2x00_rf(&rt2x00dev->chip, RF3022)) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || +@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2 + /* + * This device requires firmware. + */ +- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); ++ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && ++ !rt2x00_rt(&rt2x00dev->chip, RT3052)) ++ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + +--- a/drivers/net/wireless/rt2x00/rt2800pci.h ++++ b/drivers/net/wireless/rt2x00/rt2800pci.h +@@ -36,7 +36,8 @@ + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G +- * RF3052 2.4G 2T2R ++ * RF3021 2.4G 1T2R ++ * RF3022 2.4G 2T2R + */ + #define RF2820 0x0001 + #define RF2850 0x0002 +@@ -44,7 +45,8 @@ + #define RF2750 0x0004 + #define RF3020 0x0005 + #define RF2020 0x0006 +-#define RF3052 0x0008 ++#define RF3021 0x0007 ++#define RF3022 0x0008 + + /* + * RT2860 version +@@ -373,6 +375,15 @@ + #define PBF_DBG 0x043c + + /* ++ * RF registers ++ */ ++#define RF_CSR_CFG 0x0500 ++#define RF_CSR_CFG_DATA FIELD32(0x000000ff) ++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) ++#define RF_CSR_CFG_WRITE FIELD32(0x00010000) ++#define RF_CSR_CFG_BUSY FIELD32(0x00020000) ++ ++/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ +@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry { + * BBP 3: RX Antenna + */ + #define BBP3_RX_ANTENNA FIELD8(0x18) ++#define BBP3_HT40_PLUS FIELD8(0x20) ++ ++/* ++ * BBP 4: Bandwidth ++ */ ++#define BBP4_TX_BF FIELD8(0x01) ++#define BBP4_BANDWIDTH FIELD8(0x18) ++ ++/* ++ * RFCSR registers ++ * The wordsize of the RFCSR is 8 bits. ++ */ ++ ++/* ++ * RFCSR 6: ++ */ ++#define RFCSR6_R FIELD8(0x03) ++ ++/* ++ * RFCSR 7: ++ */ ++#define RFCSR7_RF_TUNING FIELD8(0x01) ++ ++/* ++ * RFCSR 12: ++ */ ++#define RFCSR12_TX_POWER FIELD8(0x1f) ++ ++/* ++ * RFCSR 22: ++ */ ++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) ++ ++/* ++ * RFCSR 23: ++ */ ++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) ++ ++/* ++ * RFCSR 30: ++ */ ++#define RFCSR30_RF_CALIBRATION FIELD8(0x80) + + /* + * RF registers diff --git a/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch deleted file mode 100644 index 3cb6147030..0000000000 --- a/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 89950075234deb1f98ff52b225487ffc5b8199b0 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sun, 8 Mar 2009 16:47:28 +0100 -Subject: [PATCH] rt2x00: Fix fill_rxdone (rt2800pci) - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -2037,7 +2037,7 @@ static void rt2800pci_fill_rxdone(struct - /* - * Remove TXWI descriptor from start of buffer. - */ -- skb_pull(entry->skb, TXWI_DESC_SIZE); -+ skb_pull(entry->skb, RXWI_DESC_SIZE); - skb_trim(entry->skb, rxdesc->size); - } - diff --git a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch new file mode 100644 index 0000000000..25c07791f0 --- /dev/null +++ b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch @@ -0,0 +1,136 @@ +From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Tue, 17 Mar 2009 14:01:29 +0100 +Subject: [PATCH] rt2x00: Fix compile errors for SoC + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.c | 37 +++++++++++++++---------------- + 1 files changed, 18 insertions(+), 19 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/rt2x00/rt2800pci.c +@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL"); + #define WSOC_RT_CHIPSET RT3052 + #endif /* CONFIG_RALINK_RT305X */ + +-static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev) ++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) + { + kfree(rt2x00dev->rf); + rt2x00dev->rf = NULL; +@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt + rt2x00dev->eeprom = NULL; + } + +-static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev) ++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) + { + struct platform_device *pdev = to_platform_device(rt2x00dev->dev); + struct resource *res; +@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt + + exit: + ERROR_PROBE("Failed to allocate registers.\n"); +- rt2800soc_free_reg(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); + + return -ENOMEM; + } + +-static int rt2800soc_probe(struct platform_device *pdev) ++static int rt2x00soc_probe(struct platform_device *pdev) + { +- struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p; ++ const struct rt2x00_ops *ops = &rt2800pci_ops; + struct ieee80211_hw *hw; + struct rt2x00_dev *rt2x00dev; + int retval; +@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo + + rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET); + +- retval = rt2800soc_alloc_reg(rt2x00dev); ++ retval = rt2x00soc_alloc_reg(rt2x00dev); + if (retval) + goto exit_free_device; + +@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo + return 0; + + exit_free_reg: +- rt2800soc_free_reg(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); + + exit_free_device: + ieee80211_free_hw(hw); +@@ -3267,7 +3267,7 @@ exit_free_device: + return retval; + } + +-static int rt2800soc_remove(struct platform_device *pdev) ++static int rt2x00soc_remove(struct platform_device *pdev) + { + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; +@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf + * Free all allocated data. + */ + rt2x00lib_remove_dev(rt2x00dev); +- rt2800soc_free_reg(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); + ieee80211_free_hw(hw); + + return 0; + } + + #ifdef CONFIG_PM +-int rt2x00soc_suspend(struct device *dev, pm_message_t state) ++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) + { +- struct ieee80211_hw *hw = dev_get_drvdata(dev); ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + +@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev + if (retval) + return retval; + +- rt2800soc_free_reg(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); + + return 0; + } + +-int rt2x00soc_resume(struct device *dev) ++int rt2x00soc_resume(struct platform_device *pdev) + { +- struct ieee80211_hw *hw = dev_get_drvdata(dev); ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct rt2x00_dev *rt2x00dev = hw->priv; + int retval; + +@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev) + return 0; + + exit_free_reg: +- rt2x00pci_free_reg(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); + + return retval; + } +@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_ + .name = "rt2800_wmac", + .owner = THIS_MODULE, + .mod_name = KBUILD_MODNAME, +- .p = &rt2800pci_ops; +- } +- .probe = rt2800soc_probe, +- .remove = __devexit_p(rt2800soc_remove), ++ }, ++ .probe = rt2x00soc_probe, ++ .remove = __devexit_p(rt2x00soc_remove), + .suspend = rt2x00soc_suspend, + .resume = rt2x00soc_resume, + }; diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch index 5fe8a3a1f4..4fe0e46ccb 100644 --- a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch +++ b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c -@@ -1024,6 +1024,9 @@ static void ath_unregister_led(struct at +@@ -1031,6 +1031,9 @@ static void ath_unregister_led(struct at static void ath_deinit_leds(struct ath_softc *sc) { @@ -10,7 +10,7 @@ cancel_delayed_work_sync(&sc->ath_led_blink_work); ath_unregister_led(&sc->assoc_led); sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; -@@ -1038,6 +1041,9 @@ static void ath_init_leds(struct ath_sof +@@ -1045,6 +1048,9 @@ static void ath_init_leds(struct ath_sof char *trigger; int ret; diff --git a/package/mac80211/patches/402-ath9k-enable-debug.patch b/package/mac80211/patches/402-ath9k-enable-debug.patch index d1e800ca2f..24234eb224 100644 --- a/package/mac80211/patches/402-ath9k-enable-debug.patch +++ b/package/mac80211/patches/402-ath9k-enable-debug.patch @@ -1,11 +1,11 @@ --- a/config.mk +++ b/config.mk -@@ -111,7 +111,7 @@ ifneq ($(CONFIG_PCI),) +@@ -125,7 +125,7 @@ ifneq ($(CONFIG_PCI),) CONFIG_ATH5K=m - # CONFIG_ATH5K_DEBUG is not set + # CONFIG_ATH5K_DEBUG=y CONFIG_ATH9K=m --# CONFIG_ATH9K_DEBUG is not set +-# CONFIG_ATH9K_DEBUG=y +CONFIG_ATH9K_DEBUG=y - CONFIG_IWLWIFI=m + # CONFIG_IWLWIFI=m diff --git a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch index 8f41b5b8df..69d32103b0 100644 --- a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch +++ b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c -@@ -494,11 +494,18 @@ static int ath9k_hw_init_macaddr(struct +@@ -513,11 +513,18 @@ static int ath9k_hw_init_macaddr(struct ah->macaddr[2 * i] = eeval >> 8; ah->macaddr[2 * i + 1] = eeval & 0xff; } |