[tools] introduce missing-macros meta package, this will supply needed m4 macros which are used but not shipped by various packages in feeds

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24753 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 1108 insertions, 0 deletions

diff --git a/tools/missing-macros/src/m4/lib-ld.m4 b/tools/missing-macros/src/m4/lib-ld.m4
new file mode 100644
index 0000000000..ebb30528bd
--- /dev/null
+++ b/tools/missing-macros/src/m4/lib-ld.m4
@@ -0,0 +1,110 @@
+# lib-ld.m4 serial 4 (gettext-0.18)
+dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes ;;
+*)
+  acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]* | [A-Za-z]:[\\/]*)]
+      [re_direlt='/[^/][^/]*/\.\./']
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL([acl_cv_path_LD],
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break ;;
+      *)
+        test "$with_gnu_ld" != yes && break ;;
+      esac
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT([$LD])
+else
+  AC_MSG_RESULT([no])
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/tools/missing-macros/src/m4/lib-link.m4 b/tools/missing-macros/src/m4/lib-link.m4
new file mode 100644
index 0000000000..c73bd8e3a4
--- /dev/null
+++ b/tools/missing-macros/src/m4/lib-link.m4
@@ -0,0 +1,774 @@
+# lib-link.m4 serial 21 (gettext-0.18)
+dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.54])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[translit([$1],[./-], [___])])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[translit([$1],[./-], [___])])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+    dnl because these -l options might require -L options that are present in
+    dnl LIBS. -l options benefit only from the -L options listed before it.
+    dnl Otherwise, add it to the front of LIBS, because it may be a static
+    dnl library that depends on another static library that is present in LIBS.
+    dnl Static libraries benefit only from the static libraries listed after
+    dnl it.
+    case " $LIB[]NAME" in
+      *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+      *)       LIBS="$LIB[]NAME $LIBS" ;;
+    esac
+    AC_TRY_LINK([$3], [$4],
+      [ac_cv_lib[]Name=yes],
+      [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+  m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE([rpath],
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  define([acl_frompackage_]NAME, [$2])
+  popdef([NAME])
+  pushdef([PACK],[$2])
+  pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+                                  [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  define([acl_libsinpackage_]PACKUP,
+    m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1])
+  popdef([PACKUP])
+  popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+  pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+                                  [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+  dnl Autoconf >= 2.61 supports dots in --with options.
+  pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH(P_A_C_K[-prefix],
+[[  --with-]]P_A_C_K[[-prefix[=DIR]  search for ]PACKLIBS[ in DIR/include and DIR/lib
+  --without-]]P_A_C_K[[-prefix     don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  LIB[]NAME[]_PREFIX=
+  dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+  dnl computed. So it has to be reset here.
+  HAVE_LIB[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$acl_hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+  popdef([P_A_C_K])
+  popdef([PACKLIBS])
+  popdef([PACKUP])
+  popdef([PACK])
+  popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem" \
+             && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem" \
+                    && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
diff --git a/tools/missing-macros/src/m4/lib-prefix.m4 b/tools/missing-macros/src/m4/lib-prefix.m4
new file mode 100644
index 0000000000..1601ceaefd
--- /dev/null
+++ b/tools/missing-macros/src/m4/lib-prefix.m4
@@ -0,0 +1,224 @@
+# lib-prefix.m4 serial 7 (gettext-0.18)
+dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_LIB_ARG_WITH([lib-prefix],
+[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl   "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl   acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl   "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+  dnl There is no formal standard regarding lib and lib64.
+  dnl On glibc systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+  dnl the compiler's default mode by looking at the compiler's library search
+  dnl path. If at least one of its elements ends in /lib64 or points to a
+  dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+  dnl Otherwise we use the default, namely "lib".
+  dnl On Solaris systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+  dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+      dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+      dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
+      dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+      dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+      dnl symlink is missing, so we set acl_libdirstem2 too.
+      AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+        [AC_EGREP_CPP([sixtyfour bits], [
+#ifdef _LP64
+sixtyfour bits
+#endif
+           ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+        ])
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+])