diff options
| author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-01-31 17:56:43 +0000 |
|---|---|---|
| committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2010-01-31 17:56:43 +0000 |
| commit | e79a74f292b5ec764382c3cda43581b4ad774f09 (patch) | |
| tree | 8cc77d43fe9e73ba563e4a1385f39c9e46b4212f /target | |
| parent | 052aabe37a34967fc0d8d0ad459ff22f9facb9da (diff) | |
ar71xx: nuke 2.6.3[01] stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19467 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
64 files changed, 0 insertions, 2318 deletions
diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30 deleted file mode 100644 index 89146ecd11..0000000000 --- a/target/linux/ar71xx/config-2.6.30 +++ /dev/null @@ -1,238 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -CONFIG_AR71XX_DEV_AP91_PCI=y -CONFIG_AR71XX_DEV_AP94_PCI=y -CONFIG_AR71XX_DEV_AR913X_WMAC=y -CONFIG_AR71XX_DEV_DSA=y -CONFIG_AR71XX_DEV_GPIO_BUTTONS=y -CONFIG_AR71XX_DEV_LEDS_GPIO=y -CONFIG_AR71XX_DEV_M25P80=y -CONFIG_AR71XX_DEV_PB42_PCI=y -CONFIG_AR71XX_DEV_USB=y -CONFIG_AR71XX_MACH_AP81=y -CONFIG_AR71XX_MACH_AP83=y -CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR_600_A1=y -CONFIG_AR71XX_MACH_DIR_615_C1=y -CONFIG_AR71XX_MACH_DIR_825_B1=y -CONFIG_AR71XX_MACH_MZK_W04NU=y -CONFIG_AR71XX_MACH_MZK_W300NH=y -CONFIG_AR71XX_MACH_PB42=y -CONFIG_AR71XX_MACH_PB44=y -CONFIG_AR71XX_MACH_RB_4XX=y -CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_WR1043ND=y -CONFIG_AR71XX_MACH_TL_WR741ND=y -CONFIG_AR71XX_MACH_TL_WR841N_V1=y -CONFIG_AR71XX_MACH_TL_WR941ND=y -CONFIG_AR71XX_MACH_UBNT=y -CONFIG_AR71XX_MACH_WNDR3700=y -CONFIG_AR71XX_MACH_WNR2000=y -CONFIG_AR71XX_MACH_WP543=y -CONFIG_AR71XX_MACH_WRT160NL=y -CONFIG_AR71XX_MACH_WRT400N=y -CONFIG_AR71XX_MACH_WZR_HP_G300NH=y -CONFIG_AR71XX_NVRAM=y -CONFIG_AR71XX_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATHEROS_AR71XX=y -# CONFIG_BCM47XX is not set -# CONFIG_BINARY_PRINTF is not set -CONFIG_BITREVERSE=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR2=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_ICPLUS_PHY=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_WNDR3700_USB is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_M25PXX_USE_FAST_READ is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MICREL_PHY=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD_AR91XX_FLASH=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_RB4XX=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_WRT160NL_PARTS=y -CONFIG_MYLOADER=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -CONFIG_NET_DSA_TAG_TRAILER=y -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366S_PHY_DEBUG_FS=y -CONFIG_RTL8366_SMI=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -# CONFIG_SLOW_WORK is not set -CONFIG_SLUB=y -CONFIG_SPI=y -CONFIG_SPI_AP83=y -CONFIG_SPI_AR71XX=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_PB44=y -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_VSC7385 is not set -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TRACING_SUPPORT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_SUPPORT=y -CONFIG_YAFFS_9BYTE_TAGS=y -CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31 deleted file mode 100644 index 3b8529b222..0000000000 --- a/target/linux/ar71xx/config-2.6.31 +++ /dev/null @@ -1,240 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -# CONFIG_AR7 is not set -CONFIG_AR71XX_DEV_AP91_PCI=y -CONFIG_AR71XX_DEV_AP94_PCI=y -CONFIG_AR71XX_DEV_AR913X_WMAC=y -CONFIG_AR71XX_DEV_DSA=y -CONFIG_AR71XX_DEV_GPIO_BUTTONS=y -CONFIG_AR71XX_DEV_LEDS_GPIO=y -CONFIG_AR71XX_DEV_M25P80=y -CONFIG_AR71XX_DEV_PB42_PCI=y -CONFIG_AR71XX_DEV_USB=y -CONFIG_AR71XX_MACH_AP81=y -CONFIG_AR71XX_MACH_AP83=y -CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR_600_A1=y -CONFIG_AR71XX_MACH_DIR_615_C1=y -CONFIG_AR71XX_MACH_DIR_825_B1=y -CONFIG_AR71XX_MACH_MZK_W04NU=y -CONFIG_AR71XX_MACH_MZK_W300NH=y -CONFIG_AR71XX_MACH_PB42=y -CONFIG_AR71XX_MACH_PB44=y -CONFIG_AR71XX_MACH_RB_4XX=y -CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_WR1043ND=y -CONFIG_AR71XX_MACH_TL_WR741ND=y -CONFIG_AR71XX_MACH_TL_WR841N_V1=y -CONFIG_AR71XX_MACH_TL_WR941ND=y -CONFIG_AR71XX_MACH_UBNT=y -CONFIG_AR71XX_MACH_WNDR3700=y -CONFIG_AR71XX_MACH_WNR2000=y -CONFIG_AR71XX_MACH_WP543=y -CONFIG_AR71XX_MACH_WRT160NL=y -CONFIG_AR71XX_MACH_WRT400N=y -CONFIG_AR71XX_MACH_WZR_HP_G300NH=y -CONFIG_AR71XX_NVRAM=y -CONFIG_AR71XX_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATHEROS_AR71XX=y -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR2=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -# CONFIG_FSNOTIFY is not set -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_ICPLUS_PHY=y -CONFIG_IMAGE_CMDLINE_HACK=y -# CONFIG_INITRAMFS_COMPRESSION_LZO is not set -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_WNDR3700_USB is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_M25PXX_USE_FAST_READ is not set -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MICREL_PHY=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD_AR91XX_FLASH=y -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_RB4XX=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_WRT160NL_PARTS=y -CONFIG_MYLOADER=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_TAG_DSA is not set -# CONFIG_NET_DSA_TAG_EDSA is not set -CONFIG_NET_DSA_TAG_TRAILER=y -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366S_PHY=y -# CONFIG_RTL8366S_PHY_DEBUG_FS is not set -CONFIG_RTL8366_SMI=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SPI=y -CONFIG_SPI_AP83=y -CONFIG_SPI_AR71XX=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_PB44=y -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_VSC7385 is not set -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_SUPPORT=y -CONFIG_YAFFS_9BYTE_TAGS=y -CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/patches-2.6.30/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.30/001-ar71xx_core.patch deleted file mode 100644 index b94aff751a..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/001-ar71xx_core.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -607,6 +607,13 @@ ifdef CONFIG_PHYSICAL_START - load-y = $(CONFIG_PHYSICAL_START) - endif - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 -+ - # temporary until string.h is fixed - cflags-y += -ffreestanding - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -22,6 +22,23 @@ choice - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ - config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K -@@ -634,6 +651,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - endchoice - - source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/basler/excite/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/lasat/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.30/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.30/002-ar71xx_pci.patch deleted file mode 100644 index 737c21f10b..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/002-ar71xx_pci.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o - obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o - obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o -+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.30/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.30/003-ar71xx_usb_host.patch deleted file mode 100644 index 4a08987bec..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/003-ar71xx_usb_host.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -78,6 +78,13 @@ config USB_EHCI_BIG_ENDIAN_DESC - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) - default y - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -151,6 +158,13 @@ config USB_OHCI_HCD - To compile this driver as a module, choose M here: the - module will be called ohci-hcd. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1075,6 +1075,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_USB_EHCI_AR71XX -+#include "ehci-ar71xx.c" -+#define PLATFORM_DRIVER ehci_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1081,6 +1081,11 @@ MODULE_LICENSE ("GPL"); - #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver - #endif - -+#ifdef CONFIG_USB_OHCI_AR71XX -+#include "ohci-ar71xx.c" -+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ diff --git a/target/linux/ar71xx/patches-2.6.30/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.30/004-ar71xx_spi_controller.patch deleted file mode 100644 index 9c196e077e..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/004-ar71xx_spi_controller.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -53,6 +53,13 @@ if SPI_MASTER - - comment "SPI Master Controller Drivers" - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -11,6 +11,7 @@ endif - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o - obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.30/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.30/005-ar71xx_mac_driver.patch deleted file mode 100644 index e780ba954c..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/005-ar71xx_mac_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -2087,6 +2087,8 @@ config ACENIC_OMIT_TIGON_I - - The safe and default value for this is N. - -+source drivers/net/ag71xx/Kconfig -+ - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -97,6 +97,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o - obj-$(CONFIG_MII) += mii.o - obj-$(CONFIG_PHYLIB) += phy/ - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_SUNDANCE) += sundance.o - obj-$(CONFIG_HAMACHI) += hamachi.o - obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/target/linux/ar71xx/patches-2.6.30/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.30/006-ar71xx_wdt_driver.patch deleted file mode 100644 index 2c3b68ff54..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/006-ar71xx_wdt_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -764,6 +764,13 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - - # PARISC Architecture - diff --git a/target/linux/ar71xx/patches-2.6.30/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.30/007-ar91xx_flash_driver.patch deleted file mode 100644 index 943af6e42f..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/007-ar91xx_flash_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -268,6 +268,13 @@ config MTD_ALCHEMY - help - Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards - -+config MTD_AR91XX_FLASH -+ tristate "Atheros AR91xx parallel flash support" -+ depends on ATHEROS_AR71XX -+ select MTD_COMPLEX_MAPPINGS -+ help -+ Parallel flash driver for the Atheros AR91xx based boards. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/ar71xx/patches-2.6.30/100-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/ar71xx/patches-2.6.30/100-mtd_m25p80_add_pm25lv_flash_support.patch deleted file mode 100644 index 2fac990c7c..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/100-mtd_m25p80_add_pm25lv_flash_support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -500,6 +500,10 @@ static struct flash_info __devinitdata m - { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, }, - { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, }, - -+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ -+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, -+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, -+ - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ diff --git a/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch deleted file mode 100644 index 2a09911e1d..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/101-ksz8041_phy_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -108,6 +108,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.30/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.30/102-mtd_m25p80_add_myloader_parser.patch deleted file mode 100644 index 4fde6ed43e..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/102-mtd_m25p80_add_myloader_parser.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -718,6 +718,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - -+#ifdef CONFIG_MTD_MYLOADER_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "MyLoader", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif -+ - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.30/103-mtd_m25p80_add_en25pxx_support.patch b/target/linux/ar71xx/patches-2.6.30/103-mtd_m25p80_add_en25pxx_support.patch deleted file mode 100644 index 4bd8bfaf15..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/103-mtd_m25p80_add_en25pxx_support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -500,6 +500,10 @@ static struct flash_info __devinitdata m - { "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, }, - { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, }, - -+ /* EON -- en25pxx */ -+ { "en25p32", 0x1c2016, 0, 64 * 1024, 64, }, -+ { "en25p64", 0x1c2017, 0, 64 * 1024, 128, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.30/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.30/104-mtd_m25p80_add_redboot_parser.patch deleted file mode 100644 index 45731ed258..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/104-mtd_m25p80_add_redboot_parser.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -732,6 +732,15 @@ static int __devinit m25p_probe(struct s - } - #endif - -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "RedBoot", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.30/105-mtd_m25p80_add_mx25lxxx_support.patch b/target/linux/ar71xx/patches-2.6.30/105-mtd_m25p80_add_mx25lxxx_support.patch deleted file mode 100644 index a9acede4fb..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/105-mtd_m25p80_add_mx25lxxx_support.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -504,6 +504,11 @@ static struct flash_info __devinitdata m - { "en25p32", 0x1c2016, 0, 64 * 1024, 64, }, - { "en25p64", 0x1c2017, 0, 64 * 1024, 128, }, - -+ /* Macronix -- mx25lxxx */ -+ { "mx25l32", 0xc22016, 0, 64 * 1024, 64, }, -+ { "mx25l64", 0xc22017, 0, 64 * 1024, 128, }, -+ { "mx25l128", 0xc22018, 0, 64 * 1024, 256, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.30/106-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/ar71xx/patches-2.6.30/106-mtd_m25p80_add_xxxs33b_support.patch deleted file mode 100644 index 5bd20a7692..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/106-mtd_m25p80_add_xxxs33b_support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -509,6 +509,11 @@ static struct flash_info __devinitdata m - { "mx25l64", 0xc22017, 0, 64 * 1024, 128, }, - { "mx25l128", 0xc22018, 0, 64 * 1024, 256, }, - -+ /* Numonyx -- xxxs33b */ -+ { "160s33b", 0x898911, 0, 64 * 1024, 64, }, -+ { "320s33b", 0x898912, 0, 64 * 1024, 128, }, -+ { "640s33b", 0x898913, 0, 64 * 1024, 256, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, -@@ -656,11 +661,12 @@ static int __devinit m25p_probe(struct s - dev_set_drvdata(&spi->dev, flash); - - /* -- * Atmel serial flash tend to power up -+ * Atmel and Intel/Numonyx serial flash tend to power up - * with the software protection bits set - */ - -- if (info->jedec_id >> 16 == 0x1f) { -+ if (info->jedec_id >> 16 == 0x1f || -+ info->jedec_id >> 16 == 0x89) { - write_enable(flash); - write_sr(flash, 0); - } diff --git a/target/linux/ar71xx/patches-2.6.30/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.30/107-mtd-SST39VF6401B-support.patch deleted file mode 100644 index d04f6bb536..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/107-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -160,6 +160,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39LF512 0x00D4 - #define SST39LF010 0x00D5 - #define SST39LF020 0x00D6 -@@ -1518,6 +1519,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = MANUFACTURER_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = MANUFACTURER_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-2.6.30/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.30/108-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index 2ddd0d3dd3..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/108-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1152,8 +1152,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1169,6 +1169,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1515,7 +1517,6 @@ static int cfi_amdstd_write_buffers(stru - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1579,8 +1580,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1600,6 +1601,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - put_chip(map, chip, adr); -@@ -1667,9 +1669,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -1691,6 +1693,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - put_chip(map, chip, adr); - spin_unlock(chip->mutex); diff --git a/target/linux/ar71xx/patches-2.6.30/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.30/109-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index 5696d39651..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/109-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -752,6 +752,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - #endif -+ -+#ifdef CONFIG_MTD_WRT160NL_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "wrt160nl", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -180,6 +180,12 @@ config MTD_AR7_PARTS - ---help--- - TI AR7 partitioning support - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX) ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - diff --git a/target/linux/ar71xx/patches-2.6.30/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.30/110-usb-ehci-add-war-for-synopsys-hc-bug.patch deleted file mode 100644 index a34155a205..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/110-usb-ehci-add-war-for-synopsys-hc-bug.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/usb/host/ehci-q.c -+++ b/drivers/usb/host/ehci-q.c -@@ -1127,6 +1127,9 @@ static void end_unlink_async (struct ehc - ehci->reclaim = NULL; - start_unlink_async (ehci, next); - } -+ -+ if (ehci->has_synopsys_hc_bug) -+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } - - /* makes sure the async qh will become idle */ ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -125,6 +125,7 @@ struct ehci_hcd { /* one per controlle - unsigned big_endian_mmio:1; - unsigned big_endian_desc:1; - unsigned has_amcc_usb23:1; -+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/ar71xx/patches-2.6.30/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.30/111-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 8c966d272d..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/111-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -55,7 +55,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -190,6 +192,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) - { - struct map_info *map = mtd->priv; -@@ -199,6 +202,7 @@ static void fixup_use_write_buffers(stru - mtd->write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) -@@ -1326,6 +1330,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1437,7 +1442,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1516,6 +1520,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-2.6.30/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.30/120-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index b58aeedc38..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/120-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-2.6.30/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.30/121-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1a11a69c6f..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/121-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag - # switch drivers - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o - obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o - diff --git a/target/linux/ar71xx/patches-2.6.30/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.30/140-redboot_partition_scan.patch deleted file mode 100644 index 289d4eb990..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/140-redboot_partition_scan.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; - } - } else { - offset = directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - offset += master->erasesize; - if (offset == master->size) - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; -- - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); - -@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.30/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.30/200-rb4xx_nand_driver.patch deleted file mode 100644 index 1ca9f6ed79..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/200-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -446,4 +446,8 @@ config MTD_NAND_SOCRATES - help - Enables support for NAND Flash chips wired onto Socrates board. - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATHEROS_AR71XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.30/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.30/201-ap83_spi_controller.patch deleted file mode 100644 index a8e889a7bd..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/201-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -11,6 +11,7 @@ endif - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AP83) += ap83_spi.o - obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -53,6 +53,14 @@ if SPI_MASTER - - comment "SPI Master Controller Drivers" - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && AR71XX_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_AR71XX - tristate "Atheros AR71xx SPI Controller" - depends on SPI_MASTER && ATHEROS_AR71XX diff --git a/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch deleted file mode 100644 index b071d5d21c..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -272,6 +272,11 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -37,6 +37,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - - # SPI protocol drivers (device/link on bus) - obj-$(CONFIG_SPI_SPIDEV) += spidev.o -+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... - diff --git a/target/linux/ar71xx/patches-2.6.30/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.30/203-pb44_spi_controller.patch deleted file mode 100644 index e48710ca91..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/203-pb44_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -68,6 +68,14 @@ config SPI_AR71XX - help - This is the SPI contoller driver for Atheros AR71xx. - -+config SPI_PB44 -+ tristate "Atheros PB44 board specific SPI controller" -+ depends on SPI_MASTER && AR71XX_MACH_PB44 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros PB44 -+ reference board. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -+obj-$(CONFIG_SPI_PB44) += pb44_spi.o - obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o - obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o - obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o diff --git a/target/linux/ar71xx/patches-2.6.30/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.30/205-wndr3700-usb-led-driver.patch deleted file mode 100644 index 8284f9a036..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/205-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -227,6 +227,13 @@ config LEDS_BD2802 - This option enables support for BD2802GU RGB LED driver chips - accessed via the I2C bus. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_LEDS_PCA955X) += leds-pca9 - obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - - # LED SPI Drivers - obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/target/linux/ar71xx/patches-2.6.30/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.30/206-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index 0f1613c84d..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/206-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -176,4 +176,12 @@ config GPIO_MCP23S08 - SPI driver for Microchip MCP23S08 I/O expander. This provides - a GPIO interface supporting inputs and outputs. - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting inputs. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -7,6 +7,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o - obj-$(CONFIG_GPIO_MAX7301) += max7301.o - obj-$(CONFIG_GPIO_MAX732X) += max732x.o - obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o - obj-$(CONFIG_GPIO_PCA953X) += pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o - obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.30/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.30/300-mips_fw_myloader.patch deleted file mode 100644 index 55e7e8bde9..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/300-mips_fw_myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -165,6 +165,7 @@ endif - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -829,6 +829,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-2.6.30/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.30/901-get_c0_compare_irq_function.patch deleted file mode 100644 index adb8044af6..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/901-get_c0_compare_irq_function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -48,6 +48,7 @@ - #include <asm/types.h> - #include <asm/stacktrace.h> - #include <asm/irq.h> -+#include <asm/time.h> - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1542,6 +1543,8 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif - diff --git a/target/linux/ar71xx/patches-2.6.30/902-mips_clocksource_init_war.patch b/target/linux/ar71xx/patches-2.6.30/902-mips_clocksource_init_war.patch deleted file mode 100644 index 03a66ff133..0000000000 --- a/target/linux/ar71xx/patches-2.6.30/902-mips_clocksource_init_war.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -15,6 +15,22 @@ - #include <asm/cevt-r4k.h> - - /* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ -+/* - * The SMTC Kernel for the 34K, 1004K, et. al. replaces several - * of these routines with SMTC-specific variants. - */ -@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - return res; - } -@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void) - return (read_c0_cause() >> cp0_compare_irq) & 0x100; - } - --/* -- * Compare interrupt can be routed and latched outside the core, -- * so a single execution hazard barrier may not be enough to give -- * it time to clear as seen in the Cause register. 4 time the -- * pipeline depth seems reasonably conservative, and empirically -- * works better in configurations with high CPU/bus clock ratios. -- */ -- --#define compare_change_hazard() \ -- do { \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- } while (0) -- - int c0_compare_int_usable(void) - { - unsigned int delta; diff --git a/target/linux/ar71xx/patches-2.6.31/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.31/001-ar71xx_core.patch deleted file mode 100644 index 9c84eeae98..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/001-ar71xx_core.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -612,6 +612,13 @@ else - load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000 - endif - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 -+ - # temporary until string.h is fixed - cflags-y += -ffreestanding - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -42,6 +42,23 @@ config AR7 - Support for the Texas Instruments AR7 System-on-a-Chip - family: TNETD7100, 7200 and 7300. - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ - config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K -@@ -659,6 +676,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - endchoice - - source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/basler/excite/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/lasat/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.31/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.31/002-ar71xx_pci.patch deleted file mode 100644 index 737c21f10b..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/002-ar71xx_pci.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o - obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o - obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o -+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.31/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.31/003-ar71xx_usb_host.patch deleted file mode 100644 index 0294faf990..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/003-ar71xx_usb_host.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -98,6 +98,13 @@ config USB_EHCI_BIG_ENDIAN_DESC - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) - default y - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -171,6 +178,13 @@ config USB_OHCI_HCD - To compile this driver as a module, choose M here: the - module will be called ohci-hcd. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1119,6 +1119,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_USB_EHCI_AR71XX -+#include "ehci-ar71xx.c" -+#define PLATFORM_DRIVER ehci_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1086,6 +1086,11 @@ MODULE_LICENSE ("GPL"); - #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver - #endif - -+#ifdef CONFIG_USB_OHCI_AR71XX -+#include "ohci-ar71xx.c" -+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ diff --git a/target/linux/ar71xx/patches-2.6.31/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.31/004-ar71xx_spi_controller.patch deleted file mode 100644 index 9c196e077e..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/004-ar71xx_spi_controller.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -53,6 +53,13 @@ if SPI_MASTER - - comment "SPI Master Controller Drivers" - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -11,6 +11,7 @@ endif - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o - obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.31/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.31/005-ar71xx_mac_driver.patch deleted file mode 100644 index 043a3ec2c3..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/005-ar71xx_mac_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -2103,6 +2103,8 @@ config ACENIC_OMIT_TIGON_I - - The safe and default value for this is N. - -+source drivers/net/ag71xx/Kconfig -+ - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -103,6 +103,7 @@ obj-$(CONFIG_MII) += mii.o - obj-$(CONFIG_MDIO) += mdio.o - obj-$(CONFIG_PHYLIB) += phy/ - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_SUNDANCE) += sundance.o - obj-$(CONFIG_HAMACHI) += hamachi.o - obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/target/linux/ar71xx/patches-2.6.31/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.31/006-ar71xx_wdt_driver.patch deleted file mode 100644 index 08e58e2216..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/006-ar71xx_wdt_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -805,6 +805,13 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -110,6 +110,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - - # PARISC Architecture - diff --git a/target/linux/ar71xx/patches-2.6.31/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.31/007-ar91xx_flash_driver.patch deleted file mode 100644 index 244d820da5..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/007-ar91xx_flash_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -259,6 +259,13 @@ config MTD_ALCHEMY - help - Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards - -+config MTD_AR91XX_FLASH -+ tristate "Atheros AR91xx parallel flash support" -+ depends on ATHEROS_AR71XX -+ select MTD_COMPLEX_MAPPINGS -+ help -+ Parallel flash driver for the Atheros AR91xx based boards. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/ar71xx/patches-2.6.31/100-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/ar71xx/patches-2.6.31/100-mtd_m25p80_add_pm25lv_flash_support.patch deleted file mode 100644 index d5b89ad82d..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/100-mtd_m25p80_add_pm25lv_flash_support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m - /* Macronix */ - { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, }, - -+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ -+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, -+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, -+ - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ diff --git a/target/linux/ar71xx/patches-2.6.31/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.31/101-ksz8041_phy_driver.patch deleted file mode 100644 index 2a09911e1d..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/101-ksz8041_phy_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -108,6 +108,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.31/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.31/102-mtd_m25p80_add_myloader_parser.patch deleted file mode 100644 index be84b35a79..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/102-mtd_m25p80_add_myloader_parser.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -722,6 +722,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - -+#ifdef CONFIG_MTD_MYLOADER_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "MyLoader", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif -+ - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.31/103-mtd_m25p80_add_en25pxx_support.patch b/target/linux/ar71xx/patches-2.6.31/103-mtd_m25p80_add_en25pxx_support.patch deleted file mode 100644 index 0b53151ae5..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/103-mtd_m25p80_add_en25pxx_support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m - /* Macronix */ - { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, }, - -+ /* EON -- en25pxx */ -+ { "en25p32", 0x1c2016, 0, 64 * 1024, 64, }, -+ { "en25p64", 0x1c2017, 0, 64 * 1024, 128, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.31/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.31/104-mtd_m25p80_add_redboot_parser.patch deleted file mode 100644 index 105778a991..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/104-mtd_m25p80_add_redboot_parser.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -736,6 +736,15 @@ static int __devinit m25p_probe(struct s - } - #endif - -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "RedBoot", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.31/105-mtd_m25p80_add_mx25lxxx_support.patch b/target/linux/ar71xx/patches-2.6.31/105-mtd_m25p80_add_mx25lxxx_support.patch deleted file mode 100644 index d4b8ee93e8..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/105-mtd_m25p80_add_mx25lxxx_support.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m - { "en25p32", 0x1c2016, 0, 64 * 1024, 64, }, - { "en25p64", 0x1c2017, 0, 64 * 1024, 128, }, - -+ /* Macronix -- mx25lxxx */ -+ { "mx25l32", 0xc22016, 0, 64 * 1024, 64, }, -+ { "mx25l64", 0xc22017, 0, 64 * 1024, 128, }, -+ { "mx25l128", 0xc22018, 0, 64 * 1024, 256, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.31/106-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/ar71xx/patches-2.6.31/106-mtd_m25p80_add_xxxs33b_support.patch deleted file mode 100644 index dfd855a499..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/106-mtd_m25p80_add_xxxs33b_support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m - { "mx25l64", 0xc22017, 0, 64 * 1024, 128, }, - { "mx25l128", 0xc22018, 0, 64 * 1024, 256, }, - -+ /* Numonyx -- xxxs33b */ -+ { "160s33b", 0x898911, 0, 64 * 1024, 64, }, -+ { "320s33b", 0x898912, 0, 64 * 1024, 128, }, -+ { "640s33b", 0x898913, 0, 64 * 1024, 256, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, -@@ -660,11 +665,12 @@ static int __devinit m25p_probe(struct s - dev_set_drvdata(&spi->dev, flash); - - /* -- * Atmel serial flash tend to power up -+ * Atmel and Intel/Numonyx serial flash tend to power up - * with the software protection bits set - */ - -- if (info->jedec_id >> 16 == 0x1f) { -+ if (info->jedec_id >> 16 == 0x1f || -+ info->jedec_id >> 16 == 0x89) { - write_enable(flash); - write_sr(flash, 0); - } diff --git a/target/linux/ar71xx/patches-2.6.31/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.31/107-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 93f9176b26..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/107-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -160,6 +160,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39LF512 0x00D4 - #define SST39LF010 0x00D5 - #define SST39LF020 0x00D6 -@@ -1531,6 +1532,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = MANUFACTURER_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = MANUFACTURER_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-2.6.31/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.31/108-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index d4272ab1b3..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/108-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1141,8 +1141,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1158,6 +1158,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1504,7 +1506,6 @@ static int cfi_amdstd_write_buffers(stru - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1568,8 +1569,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1589,6 +1590,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - put_chip(map, chip, adr); -@@ -1656,9 +1658,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -1680,6 +1682,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - put_chip(map, chip, adr); - spin_unlock(chip->mutex); diff --git a/target/linux/ar71xx/patches-2.6.31/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.31/109-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index ccf4b66b60..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/109-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -756,6 +756,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - #endif -+ -+#ifdef CONFIG_MTD_WRT160NL_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "wrt160nl", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -181,6 +181,12 @@ config MTD_AR7_PARTS - ---help--- - TI AR7 partitioning support - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX) ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - diff --git a/target/linux/ar71xx/patches-2.6.31/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.31/110-usb-ehci-add-war-for-synopsys-hc-bug.patch deleted file mode 100644 index 2e607ab236..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/110-usb-ehci-add-war-for-synopsys-hc-bug.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/usb/host/ehci-q.c -+++ b/drivers/usb/host/ehci-q.c -@@ -1140,6 +1140,9 @@ static void end_unlink_async (struct ehc - ehci->reclaim = NULL; - start_unlink_async (ehci, next); - } -+ -+ if (ehci->has_synopsys_hc_bug) -+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } - - /* makes sure the async qh will become idle */ ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -128,6 +128,7 @@ struct ehci_hcd { /* one per controlle - unsigned big_endian_desc:1; - unsigned has_amcc_usb23:1; - unsigned broken_periodic:1; -+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/ar71xx/patches-2.6.31/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.31/111-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 4be025d870..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/111-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -55,7 +55,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -190,6 +192,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) - { - struct map_info *map = mtd->priv; -@@ -199,6 +202,7 @@ static void fixup_use_write_buffers(stru - mtd->write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) -@@ -1315,6 +1319,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1426,7 +1431,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1505,6 +1509,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-2.6.31/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.31/120-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index b58aeedc38..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/120-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-2.6.31/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.31/121-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1a11a69c6f..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/121-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag - # switch drivers - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o - obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o - diff --git a/target/linux/ar71xx/patches-2.6.31/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.31/140-redboot_partition_scan.patch deleted file mode 100644 index 289d4eb990..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/140-redboot_partition_scan.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; - } - } else { - offset = directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - offset += master->erasesize; - if (offset == master->size) - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; -- - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); - -@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.31/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.31/200-rb4xx_nand_driver.patch deleted file mode 100644 index 0207930869..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/200-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -452,4 +452,8 @@ config MTD_NAND_SOCRATES - help - Enables support for NAND Flash chips wired onto Socrates board. - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATHEROS_AR71XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.31/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.31/201-ap83_spi_controller.patch deleted file mode 100644 index a8e889a7bd..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/201-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -11,6 +11,7 @@ endif - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AP83) += ap83_spi.o - obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -53,6 +53,14 @@ if SPI_MASTER - - comment "SPI Master Controller Drivers" - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && AR71XX_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_AR71XX - tristate "Atheros AR71xx SPI Controller" - depends on SPI_MASTER && ATHEROS_AR71XX diff --git a/target/linux/ar71xx/patches-2.6.31/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.31/202-spi_vsc7385_driver.patch deleted file mode 100644 index d8f61bb909..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/202-spi_vsc7385_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -279,6 +279,11 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - - # SPI protocol drivers (device/link on bus) - obj-$(CONFIG_SPI_SPIDEV) += spidev.o -+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... - diff --git a/target/linux/ar71xx/patches-2.6.31/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.31/203-pb44_spi_controller.patch deleted file mode 100644 index e48710ca91..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/203-pb44_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -68,6 +68,14 @@ config SPI_AR71XX - help - This is the SPI contoller driver for Atheros AR71xx. - -+config SPI_PB44 -+ tristate "Atheros PB44 board specific SPI controller" -+ depends on SPI_MASTER && AR71XX_MACH_PB44 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros PB44 -+ reference board. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -+obj-$(CONFIG_SPI_PB44) += pb44_spi.o - obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o - obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o - obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o diff --git a/target/linux/ar71xx/patches-2.6.31/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.31/205-wndr3700-usb-led-driver.patch deleted file mode 100644 index d9fba35b33..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/205-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -229,6 +229,13 @@ config LEDS_BD2802 - This option enables support for BD2802GU RGB LED driver chips - accessed via the I2C bus. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_PCA955X) += leds-pca9 - obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - - # LED SPI Drivers - obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/target/linux/ar71xx/patches-2.6.31/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.31/206-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index c722f34e8c..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/206-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -188,4 +188,12 @@ config GPIO_MCP23S08 - SPI driver for Microchip MCP23S08 I/O expander. This provides - a GPIO interface supporting inputs and outputs. - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting inputs. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -7,6 +7,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o - obj-$(CONFIG_GPIO_MAX7301) += max7301.o - obj-$(CONFIG_GPIO_MAX732X) += max732x.o - obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o - obj-$(CONFIG_GPIO_PCA953X) += pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o - obj-$(CONFIG_GPIO_PL061) += pl061.o diff --git a/target/linux/ar71xx/patches-2.6.31/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.31/300-mips_fw_myloader.patch deleted file mode 100644 index bad0423eb4..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/300-mips_fw_myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -165,6 +165,7 @@ endif - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -863,6 +863,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-2.6.31/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.31/901-get_c0_compare_irq_function.patch deleted file mode 100644 index cf9c405cad..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/901-get_c0_compare_irq_function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -48,6 +48,7 @@ - #include <asm/types.h> - #include <asm/stacktrace.h> - #include <asm/irq.h> -+#include <asm/time.h> - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1538,6 +1539,8 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif - diff --git a/target/linux/ar71xx/patches-2.6.31/902-mips_clocksource_init_war.patch b/target/linux/ar71xx/patches-2.6.31/902-mips_clocksource_init_war.patch deleted file mode 100644 index 894eed1e5b..0000000000 --- a/target/linux/ar71xx/patches-2.6.31/902-mips_clocksource_init_war.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -16,6 +16,22 @@ - #include <asm/cevt-r4k.h> - - /* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ -+/* - * The SMTC Kernel for the 34K, 1004K, et. al. replaces several - * of these routines with SMTC-specific variants. - */ -@@ -31,6 +47,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - return res; - } -@@ -100,22 +117,6 @@ static int c0_compare_int_pending(void) - return (read_c0_cause() >> cp0_compare_irq) & 0x100; - } - --/* -- * Compare interrupt can be routed and latched outside the core, -- * so a single execution hazard barrier may not be enough to give -- * it time to clear as seen in the Cause register. 4 time the -- * pipeline depth seems reasonably conservative, and empirically -- * works better in configurations with high CPU/bus clock ratios. -- */ -- --#define compare_change_hazard() \ -- do { \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- irq_disable_hazard(); \ -- } while (0) -- - int c0_compare_int_usable(void) - { - unsigned int delta; |