summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>2009-03-08 15:27:46 +0000
committerflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>2009-03-08 15:27:46 +0000
commitac74991e5e88789fe6d66bf3194525cd77ddaa4e (patch)
tree84e801596fe11bd0f93df3bf9450a8b45f426401 /target
parent1607b793bb8122559d4143f1ca7902037f75c74c (diff)
[brcm63xx] add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14793 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm63xx/config-2.6.2712
-rw-r--r--target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c439
-rw-r--r--target/linux/brcm63xx/patches-2.6.27/050-spi.patch26
3 files changed, 471 insertions, 6 deletions
diff --git a/target/linux/brcm63xx/config-2.6.27 b/target/linux/brcm63xx/config-2.6.27
index 79716aba29..17fe7abc77 100644
--- a/target/linux/brcm63xx/config-2.6.27
+++ b/target/linux/brcm63xx/config-2.6.27
@@ -58,12 +58,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CRAMFS=y
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MANAGER=m
CONFIG_CSRC_R4K=y
CONFIG_DEFAULT_BIC=y
CONFIG_DEFAULT_CFQ=y
@@ -235,6 +229,12 @@ CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPI=y
+CONFIG_SPI_BCM63XX=m
+CONFIG_SPI_BITBANG=m
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_SPIDEV=m
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_VMALLOC=y
CONFIG_SSB=y
diff --git a/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c b/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c
new file mode 100644
index 0000000000..449b1d5adf
--- /dev/null
+++ b/target/linux/brcm63xx/files/drivers/spi/bcm63xx_spi.c
@@ -0,0 +1,439 @@
+/*
+ * Broadcom BCM63xx SPI controller support
+ *
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/gpio.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_spi.h>
+
+#define PFX KBUILD_MODNAME
+#define DRV_VER "0.1.0"
+
+struct bcm63xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ void __iomem *regs;
+ int irq;
+
+ /* Platform data */
+ u32 speed_hz;
+ unsigned msg_fifo_size;
+ unsigned rx_fifo_size;
+
+ /* Data buffers */
+ const unsigned char *tx_ptr;
+ unsigned char *rx_ptr;
+ int remaining_bytes;
+
+ struct clk *clk;
+ struct resource *ioarea;
+ struct platform_device *pdev;
+};
+
+static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on)
+{
+ u16 val;
+
+ val = bcm_spi_readw(SPI_CMD);
+ if (is_on == BITBANG_CS_INACTIVE)
+ val |= SPI_CMD_NOOP;
+ else if (is_on == BITBANG_CS_ACTIVE)
+ val |= (1 << spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
+ bcm_spi_writew(val, SPI_CMD);
+}
+
+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ u8 bits_per_word;
+ u8 clk_cfg;
+ u32 hz;
+ unsigned int div;
+
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+
+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
+ if (bits_per_word != 8) {
+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, bits_per_word);
+ return -EINVAL;
+ }
+
+ if (spi->chip_select > spi->master->num_chipselect) {
+ dev_err(&spi->dev, "%s, unsupported slave %d\n",
+ __func__, spi->chip_select);
+ return -EINVAL;
+ }
+
+ /* Check clock setting */
+ div = (bs->speed_hz / hz);
+ switch (div) {
+ case 2:
+ clk_cfg = SPI_CLK_25MHZ;
+ break;
+ case 4:
+ clk_cfg = SPI_CLK_12_50MHZ;
+ break;
+ case 8:
+ clk_cfg = SPI_CLK_6_250MHZ;
+ break;
+ case 16:
+ clk_cfg = SPI_CLK_3_125MHZ;
+ break;
+ case 32:
+ clk_cfg = SPI_CLK_1_563MHZ;
+ break;
+ case 128:
+ clk_cfg = SPI_CLK_0_781MHZ;
+ break;
+ case 64:
+ default:
+ /* Set to slowest mode for compatibility */
+ clk_cfg = SPI_CLK_0_781MHZ;
+ break;
+ }
+
+ bcm_spi_writeb(clk_cfg, SPI_CLK_CFG);
+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
+ div, hz, clk_cfg);
+
+ return 0;
+}
+
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA)
+
+static int bcm63xx_spi_setup(struct spi_device *spi)
+{
+ struct spi_bitbang *bitbang;
+ struct bcm63xx_spi *bs;
+ int retval;
+
+ bs = spi_master_get_devdata(spi->master);
+ bitbang = &bs->bitbang;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if (spi->mode & ~MODEBITS) {
+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
+ __func__, spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
+ retval = bcm63xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return retval;
+ }
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
+
+ return 0;
+}
+
+/* Fill the TX FIFO with as many bytes as possible */
+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
+{
+ u8 tail;
+
+ /* Fill the Tx FIFO with as many bytes as possible */
+ tail = bcm_spi_readb(SPI_MSG_TAIL);
+ while ((tail < bs->msg_fifo_size) && (bs->remaining_bytes > 0)) {
+ if (bs->tx_ptr)
+ bcm_spi_writeb(*bs->tx_ptr++, SPI_MSG_DATA);
+ else
+ bcm_spi_writeb(0, SPI_MSG_DATA);
+ bs->remaining_bytes--;
+ tail = bcm_spi_readb(SPI_MSG_TAIL);
+ }
+}
+
+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ u8 msg_ctl;
+ u16 cmd;
+
+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+ t->tx_buf, t->rx_buf, t->len);
+
+ /* Transmitter is inhibited */
+ bs->tx_ptr = t->tx_buf;
+ bs->rx_ptr = t->rx_buf;
+ bs->remaining_bytes = t->len;
+ init_completion(&bs->done);
+
+ bcm63xx_spi_fill_tx_fifo(bs);
+
+ /* Enable the command done interrupt which
+ * we use to determine completion of a command */
+ bcm_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK);
+
+ /* Fill in the Message control register */
+ msg_ctl = bcm_spi_readb(SPI_MSG_CTL);
+ msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT);
+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
+ bcm_spi_writeb(msg_ctl, SPI_MSG_CTL);
+
+ /* Issue the transfer */
+ cmd = bcm_spi_readb(SPI_CMD);
+ cmd |= SPI_CMD_START_IMMEDIATE;
+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ bcm_spi_writeb(cmd, SPI_CMD);
+
+ wait_for_completion(&bs->done);
+
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(~(SPI_INTR_CMD_DONE), SPI_INT_MASK);
+
+ return t->len - bs->remaining_bytes;
+}
+
+/* This driver supports single master mode only. Hence
+ * CMD_DONE is the only interrupt we care about
+ */
+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = (struct spi_master *)dev_id;
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ u8 intr;
+ u16 cmd;
+
+ /* Read interupts and clear them immediately */
+ intr = bcm_spi_readb(SPI_INT_STATUS);
+ bcm_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
+
+ /* A tansfer completed */
+ if (intr & SPI_INTR_CMD_DONE) {
+ u8 rx_empty;
+
+ rx_empty = bcm_spi_readb(SPI_ST);
+ /* Read out all the data */
+ while ((rx_empty & SPI_RX_EMPTY) == 0) {
+ u8 data;
+
+ data = bcm_spi_readb(SPI_RX_DATA);
+ if (bs->rx_ptr)
+ *bs->rx_ptr++ = data;
+
+ rx_empty = bcm_spi_readb(SPI_RX_EMPTY);
+ }
+
+ /* See if there is more data to send */
+ if (bs->remaining_bytes > 0) {
+ bcm63xx_spi_fill_tx_fifo(bs);
+
+ /* Start the transfer */
+ cmd = bcm_spi_readb(SPI_CMD);
+ cmd |= SPI_CMD_START_IMMEDIATE;
+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+ bcm_spi_writeb(cmd, SPI_CMD);
+ } else
+ complete(&bs->done);
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+static int __init bcm63xx_spi_probe(struct platform_device *pdev)
+{
+ struct resource *r;
+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
+ int irq;
+ struct spi_master *master;
+ struct clk *clk;
+ struct bcm63xx_spi *bs;
+ int ret;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ clk = clk_get(&pdev->dev, "spi");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "No clock for device\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi));
+ if (!master) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ bs = spi_master_get_devdata(master);
+ bs->bitbang.master = spi_master_get(master);
+ bs->bitbang.chipselect = bcm63xx_spi_chipselect;
+ bs->bitbang.setup_transfer = bcm63xx_spi_setup_transfer;
+ bs->bitbang.txrx_bufs = bcm63xx_txrx_bufs;
+ bs->bitbang.master->setup = bcm63xx_spi_setup;
+ init_completion(&bs->done);
+
+ platform_set_drvdata(pdev, master);
+ bs->pdev = pdev;
+
+ bs->regs = ioremap_nocache(r->start, r->end - r->start);
+ if (!bs->regs) {
+ printk(KERN_ERR PFX " unable to ioremap regs\n");
+ ret = -ENOMEM;
+ goto out_free;
+ }
+ bs->irq = irq;
+ bs->clk = clk;
+ bs->msg_fifo_size = pdata->msg_fifo_size;
+ bs->rx_fifo_size = pdata->rx_fifo_size;
+
+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0,
+ pdev->dev.bus_id, master);
+ if (ret) {
+ printk(KERN_ERR PFX " unable to request irq\n");
+ goto out_unmap;
+ }
+
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->num_chipselect;
+ bs->speed_hz = pdata->speed_hz;
+
+ /* Initialize hardware */
+ clk_enable(bs->clk);
+ bcm_spi_writew(SPI_CMD_HARD_RESET, SPI_CMD);
+ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_MASK);
+
+ dev_info(&pdev->dev, PFX " at 0x%08x (irq %d) %s\n",
+ r->start, irq, DRV_VER);
+
+ ret = spi_bitbang_start(&bs->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_bitbang_start FAILED\n");
+ goto out_reset_hw;
+ }
+
+ return ret;
+
+out_reset_hw:
+ clk_disable(clk);
+ free_irq(irq, master);
+out_unmap:
+ iounmap(bs->regs);
+out_free:
+ clk_put(clk);
+ spi_master_put(master);
+out:
+ return ret;
+}
+
+static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&bs->bitbang);
+ clk_disable(bs->clk);
+ clk_put(bs->clk);
+ free_irq(bs->irq, master);
+ iounmap(bs->regs);
+ platform_set_drvdata(pdev, 0);
+ spi_master_put(bs->bitbang.master);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ clk_disable(bs->clk);
+
+ return 0;
+}
+
+static int bcm63xx_spi_resume(struct platform_device *pdev)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ clk_enable(bs->clk);
+
+ return 0;
+}
+#else
+#define bcm63xx_spi_suspend NULL
+#define bcm63xx_spi_resume NULL
+#endif
+
+static struct platform_driver bcm63xx_spi_driver = {
+ .driver = {
+ .name = "bcm63xx-spi",
+ .owner = THIS_MODULE,
+ },
+ .probe = bcm63xx_spi_probe,
+ .remove = bcm63xx_spi_remove,
+ .suspend = bcm63xx_spi_suspend,
+ .resume = bcm63xx_spi_resume,
+};
+
+
+static int __init bcm63xx_spi_init(void)
+{
+ return platform_driver_register(&bcm63xx_spi_driver);
+}
+
+static void __exit bcm63xx_spi_exit(void)
+{
+ platform_driver_unregister(&bcm63xx_spi_driver);
+}
+
+module_init(bcm63xx_spi_init);
+module_exit(bcm63xx_spi_exit);
+
+MODULE_ALIAS("platform:bcm63xx_spi");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-2.6.27/050-spi.patch b/target/linux/brcm63xx/patches-2.6.27/050-spi.patch
new file mode 100644
index 0000000000..7dea3172c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.27/050-spi.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig 2009-03-06 02:24:35.000000000 +0100
++++ b/drivers/spi/Kconfig 2009-03-06 02:25:01.000000000 +0100
+@@ -217,6 +217,13 @@
+ See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
+ Product Specification document (DS464) for hardware details.
+
++config SPI_BCM63XX
++ tristate "Broadcom BCM63xx SPI controller"
++ depends on BCM63XX
++ select SPI_BITBANG
++ help
++ SPI driver for the Broadcom BCM63xx SPI controller.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile 2009-03-06 02:25:07.000000000 +0100
++++ b/drivers/spi/Makefile 2009-03-06 02:24:13.000000000 +0100
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
++obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)