summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-08-25 13:19:54 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-08-25 13:19:54 +0000
commite8f314d901ae0ed940b7226158dd802a4e7bae36 (patch)
treec48eba2ddf48846a95de23369588d4ad94eff6f4 /target
parent28b6b57ae89f7d26dedfa4c85e9a3e4cd6b48ebe (diff)
initial attempt at cleaning up the bcm63xx stuff
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4664 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm63xx-2.6/config4
-rw-r--r--target/linux/brcm63xx-2.6/patches/000-arch_mips.patch131
-rw-r--r--target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch12834
-rw-r--r--target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch9249
-rw-r--r--target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch438
-rw-r--r--target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch70
-rw-r--r--target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch40
-rw-r--r--target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch3226
-rw-r--r--target/linux/brcm63xx-2.6/patches/030-boardparms.patch3186
-rw-r--r--target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch13
10 files changed, 12836 insertions, 16355 deletions
diff --git a/target/linux/brcm63xx-2.6/config b/target/linux/brcm63xx-2.6/config
index f7c7c0b0df..50c4cfc3b6 100644
--- a/target/linux/brcm63xx-2.6/config
+++ b/target/linux/brcm63xx-2.6/config
@@ -1260,8 +1260,8 @@ CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB is not set
-CONFIG_RUNTIME_DEBUG=y
-CONFIG_MIPS_UNCACHED=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
#
# Security options
diff --git a/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch b/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch
deleted file mode 100644
index 0659326fa3..0000000000
--- a/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch
+++ /dev/null
@@ -1,131 +0,0 @@
---- linux-2.6.17/arch/mips/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/Kconfig 2006-07-13 19:08:11.000000000 +0200
-@@ -12,6 +12,15 @@
- prompt "System type"
- default SGI_IP22
-
-+config MIPS_BRCM
-+ bool "Support for the Broadcom boards"
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select IRQ_CPU
-+ help
-+ This is a fmaily of boards based on the Broadcom MIPS32
-+
- config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- select DMA_NONCOHERENT
-@@ -780,6 +789,7 @@
-
- endchoice
-
-+source "arch/mips/brcm-boards/bcm963xx/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- linux-2.6.17/arch/mips/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/Makefile 2006-07-13 18:55:59.000000000 +0200
-@@ -145,6 +145,20 @@
- #
-
- #
-+# Broadcom board
-+#
-+core-$(CONFIG_MIPS_BRCM) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/
-+core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/
-+#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/
-+#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/
-+cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx
-+cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/brcm-boards/generic/include
-+cflags-$(CONFIG_MIPS_BRCM) += -Ibcmdrivers/opensource/include/bcm963xx
-+cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx
-+load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000
-+
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-diff -urN linux-2.6.17/arch/mips/kernel/cpu-probe.c linux-2.6.17-brcm63xx/arch/mips/kernel/cpu-probe.c
---- linux-2.6.17/arch/mips/kernel/cpu-probe.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/kernel/cpu-probe.c 2006-07-13 18:59:04.000000000 +0200
-@@ -568,6 +568,25 @@
- return;
- }
-
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+ decode_configs(c);
-+ switch (c->processor_id & 0xff00) {
-+ case PRID_IMP_BCM6338:
-+ c->cputype = CPU_BCM6338;
-+ break;
-+ case PRID_IMP_BCM6345:
-+ c->cputype = CPU_BCM6345;
-+ break;
-+ case PRID_IMP_BCM6348:
-+ c->cputype = CPU_BCM6348;
-+ break;
-+ default:
-+ c->cputype = CPU_UNKNOWN;
-+ break;
-+ }
-+}
-+
- static inline void cpu_probe_mips(struct cpuinfo_mips *c)
- {
- decode_configs(c);
-@@ -704,6 +723,9 @@
- case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
- break;
-+ case PRID_COMP_BROADCOM:
-+ cpu_probe_broadcom(c);
-+ break;
- case PRID_COMP_MIPS:
- cpu_probe_mips(c);
- break;
-diff -urN linux-2.6.17/arch/mips/kernel/proc.c linux-2.6.17-brcm63xx/arch/mips/kernel/proc.c
---- linux-2.6.17/arch/mips/kernel/proc.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/kernel/proc.c 2006-07-13 19:00:53.000000000 +0200
-@@ -85,6 +85,9 @@
- [CPU_VR4181A] = "NEC VR4181A",
- [CPU_SR71000] = "Sandcraft SR71000",
- [CPU_PR4450] = "Philips PR4450",
-+ [CPU_BCM6338] = "BCM6338",
-+ [CPU_BCM6345] = "BCM6345",
-+ [CPU_BCM6348] = "BCM6348",
- };
-
-
-diff -urN linux-2.6.17/arch/mips/mm/c-r4k.c linux-2.6.17-brcm63xx/arch/mips/mm/c-r4k.c
---- linux-2.6.17/arch/mips/mm/c-r4k.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/mm/c-r4k.c 2006-07-13 19:03:23.000000000 +0200
-@@ -914,6 +914,13 @@
- if (!(config & MIPS_CONF_M))
- panic("Don't know how to probe P-caches on this cpu.");
-
-+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
-+ {
-+ printk("brcm mips: enabling icache and dcache...\n");
-+ /* Enable caches */
-+ write_c0_diag(read_c0_diag() | 0xC0000000);
-+ }
-+
- /*
- * So we seem to be a MIPS32 or MIPS64 CPU
- * So let's probe the I-cache ...
-diff -urN linux-2.6.17/arch/mips/mm/tlbex.c linux-2.6.17-brcm63xx/arch/mips/mm/tlbex.c
---- linux-2.6.17/arch/mips/mm/tlbex.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/arch/mips/mm/tlbex.c 2006-07-13 19:03:57.000000000 +0200
-@@ -882,6 +882,9 @@
- case CPU_4KSC:
- case CPU_20KC:
- case CPU_25KF:
-+ case CPU_BCM6338:
-+ case CPU_BCM6345:
-+ case CPU_BCM6348:
- tlbw(p);
- break;
-
diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
new file mode 100644
index 0000000000..abf9a7b74a
--- /dev/null
+++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
@@ -0,0 +1,12834 @@
+diff -urN linux.old/arch/mips/bcm963xx/bcm63xx_led.c linux.dev/arch/mips/bcm963xx/bcm63xx_led.c
+--- linux.old/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/bcm63xx_led.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,582 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***************************************************************************
++ * File Name : bcm63xx_led.c
++ *
++ * Description:
++ *
++ * This file contains bcm963xx board led control API functions.
++ *
++ * To use it, do the following
++ *
++ * 1). define in the board.c the following led mappping (this is for 6345GW board):
++ * const LED_MAP_PAIR cLedMapping45GW[] =
++ * { // led name Initial state physical pin (ledMask)
++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
++ *
++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
++ * pointer from the above struct
++ *
++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
++ *
++ * 3). Sample call for kernel mode:
++ *
++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
++ *
++ * 4). Sample call for user mode
++ *
++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
++ *
++ *
++ * Created on : 10/28/2002 seanl
++ *
++ ***************************************************************************/
++
++/* Includes. */
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <asm/uaccess.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define k100ms (HZ / 10) // ~100 ms
++#define kFastBlinkCount 0 // ~100ms
++#define kSlowBlinkCount 5 // ~600ms
++
++#define MAX_VIRT_LEDS 12
++
++// uncomment // for debug led
++//#define DEBUG_LED
++
++// global variables:
++struct timer_list gLedTimer;
++int gTimerOn = FALSE;
++int gLedCount = 0;
++
++typedef struct ledinfo
++{
++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
++ BOARD_LED_STATE ledState; // current led state
++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
++} LED_INFO, *PLED_INFO;
++
++static PLED_INFO gLed = NULL;
++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
++
++#if 0 /* BROKEN */
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++static int gLedOffInBridgeMode = 1;
++#elif defined(CONFIG_BCM96345)
++static int gLedOffInBridgeMode = 0;
++#endif
++#endif
++
++void ledTimerExpire(void);
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
++
++//**************************************************************************************
++// LED operations
++//**************************************************************************************
++
++// turn led on and set the ledState
++void ledOn(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMask; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateOn;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOff(PLED_INFO pLed)
++{
++ if( pLed->ledMask )
++ {
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLow )
++ GPIO->GPIOio |= pLed->ledMask; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++// turn led on and set the ledState
++void ledOnFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
++ else
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
++ pLed->ledState = pLed->savedLedState = kLedStateFail;
++ }
++}
++
++
++// turn led off and set the ledState
++void ledOffFail(PLED_INFO pLed)
++{
++ if( pLed->ledMaskFail )
++ {
++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
++ if( pLed->ledActiveLowFail )
++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
++ else
++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
++ pLed->ledState = pLed->savedLedState = kLedStateOff;
++ }
++}
++
++
++// toggle the led and return the current ledState
++BOARD_LED_STATE ledToggle(PLED_INFO pLed)
++{
++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
++ if (GPIO->GPIOio & pLed->ledMask)
++ {
++ GPIO->GPIOio &= ~(pLed->ledMask);
++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
++ }
++ else
++ {
++ GPIO->GPIOio |= pLed->ledMask;
++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
++ }
++}
++
++
++// led timer. Will return if timer is already on
++void ledTimerStart(void)
++{
++ if (gTimerOn)
++ return;
++
++#if defined(DEBUG_LED)
++ printk("led: add_timer\n");
++#endif
++
++ init_timer(&gLedTimer);
++ gLedTimer.function = (void*)ledTimerExpire;
++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
++ add_timer (&gLedTimer);
++ gTimerOn = TRUE;
++}
++
++
++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
++// restart the timer according to ledState
++void ledTimerExpire(void)
++{
++ int i;
++ PLED_INFO pCurLed;
++
++ gTimerOn = FALSE;
++
++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
++ {
++#if defined(DEBUG_LED)
++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
++#endif
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ case kLedStateOff:
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ break;
++
++ case kLedStateBlinkOnce:
++ ledToggle(pCurLed);
++ pCurLed->blinkCountDown = 0; // reset to 0
++ pCurLed->ledState = pCurLed->savedLedState;
++ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
++ pCurLed->ledState == kLedStateFastBlinkContinues)
++ ledTimerStart(); // start timer if in blinkContinues stats
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ if (pCurLed->blinkCountDown-- == 0)
++ {
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ ledToggle(pCurLed);
++ }
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++ }
++}
++
++// initialize the gLedCount and allocate and fill gLed struct
++void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
++{
++ PLED_MAP_PAIR p1, p2;
++ PLED_INFO pCurLed;
++ int needTimer = FALSE;
++ int alreadyUsed = 0;
++
++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
++#endif
++
++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
++
++ gLedCount = 0;
++
++ // Check for multiple LED names and multiple LED GPIO pins that share the
++ // same physical board LED.
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ gLedCount++;
++ }
++
++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
++ if( gLed == NULL )
++ {
++ printk( "LED memory allocation error.\n" );
++ return;
++ }
++
++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
++
++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
++ // (ledMask) the first defined led's ledInitState will be used.
++ pCurLed = gLed;
++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
++ {
++ if( (int) p1->ledName > MAX_VIRT_LEDS )
++ continue;
++
++ alreadyUsed = 0;
++ for( p2 = cLedMapping; p2 != p1; p2++ )
++ {
++ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
++ {
++ alreadyUsed = 1;
++ break;
++ }
++ }
++
++ if( alreadyUsed == 0 )
++ {
++ // Initialize the board LED for the first time.
++ needTimer = initLedInfo( p1, pCurLed );
++ gpVirtLeds[(int) p1->ledName] = pCurLed;
++ pCurLed++;
++ }
++ else
++ {
++ PLED_INFO pLed;
++ for( pLed = gLed; pLed != pCurLed; pLed++ )
++ {
++ // Find the LED_INFO structure that has already been initialized.
++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
++ {
++ // The board LED has already been initialized but possibly
++ // not completely initialized.
++ if( p1->ledMask )
++ {
++ pLed->ledMask = p1->ledMask;
++ pLed->ledActiveLow = p1->ledActiveLow;
++ }
++ if( p1->ledMaskFail )
++ {
++ pLed->ledMaskFail = p1->ledMaskFail;
++ pLed->ledActiveLowFail = p1->ledActiveLowFail;
++ }
++ gpVirtLeds[(int) p1->ledName] = pLed;
++ break;
++ }
++ }
++ }
++ }
++
++ if (needTimer)
++ ledTimerStart();
++
++#if defined(DEBUG_LED)
++ int i;
++ for (i=0; i < gLedCount; i++)
++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
++#endif
++
++}
++
++// Initialize a structure that contains information about a physical board LED
++// control. The board LED may contain more than one GPIO pin to control a
++// normal condition (green) or a failure condition (red).
++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
++{
++ int needTimer = FALSE;
++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
++ pCurLed->ledMask = pCurMap->ledMask;
++ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
++ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
++
++ switch (pCurLed->ledState)
++ {
++ case kLedStateOn:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOn(pCurLed);
++ break;
++ case kLedStateOff:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOff(pCurLed);
++ break;
++ case kLedStateFail:
++ pCurLed->blinkCountDown = 0; // reset the blink count down
++ ledOnFail(pCurLed);
++ break;
++ case kLedStateBlinkOnce:
++ pCurLed->blinkCountDown = 1;
++ needTimer = TRUE;
++ break;
++ case kLedStateSlowBlinkContinues:
++ pCurLed->blinkCountDown = kSlowBlinkCount;
++ needTimer = TRUE;
++ break;
++ case kLedStateFastBlinkContinues:
++ pCurLed->blinkCountDown = kFastBlinkCount;
++ needTimer = TRUE;
++ break;
++ default:
++ printk("Invalid state = %d\n", pCurLed->ledState);
++ }
++
++ return( needTimer );
++}
++
++#if 0 /* BROKEN */
++// Determines if there is at least one interface in bridge mode. Bridge mode
++// is determined by the cfm convention of naming bridge interfaces nas17
++// through nas24.
++static int isBridgedProtocol(void)
++{
++ extern int dev_get(const char *name);
++ const int firstBridgeId = 17;
++ const int lastBridgeId = 24;
++ int i;
++ int ret = FALSE;
++ char name[16];
++
++ for( i = firstBridgeId; i <= lastBridgeId; i++ )
++ {
++ sprintf( name, "nas%d", i );
++
++ if( dev_get(name) )
++ {
++ ret = TRUE;
++ break;
++ }
++ }
++
++ return(ret);
++}
++#endif
++
++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ PLED_INFO ledInfoPtr;
++
++ // do the mapping from virtual to physical led
++ if( (int) ledName < MAX_VIRT_LEDS )
++ ledInfoPtr = gpVirtLeds[(int) ledName];
++ else
++ ledInfoPtr = NULL;
++
++ if (ledInfoPtr == NULL)
++ return;
++
++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
++ {
++ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
++ ledOffFail(ledInfoPtr);
++ return;
++ }
++ else
++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
++ {
++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
++ ledOff(ledInfoPtr);
++ return;
++ }
++
++#if 0 /* BROKEN */
++ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
++ {
++ static int BridgedProtocol = -1;
++
++ if( BridgedProtocol == -1 )
++ BridgedProtocol = isBridgedProtocol();
++
++ if( BridgedProtocol == TRUE )
++ return;
++ }
++#endif
++
++ // If the state is kLedStateFail and there is not a failure LED defined
++ // in the board parameters, change the state to kLedStateFastBlinkContinues.
++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
++ ledState = kLedStateFastBlinkContinues;
++
++ switch (ledState)
++ {
++ case kLedStateOn:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on the specified LED GPIO.
++ ledOn(ledInfoPtr);
++ break;
++
++ case kLedStateOff:
++ // First, turn off the complimentary (failure) LED GPIO.
++ if( ledInfoPtr->ledMaskFail )
++ ledOffFail(ledInfoPtr);
++ else
++ if( gLedHwFailFunc[(int) ledName] )
++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn off the specified LED GPIO.
++ ledOff(ledInfoPtr);
++ break;
++
++ case kLedStateFail:
++ // First, turn off the complimentary (normal) LED GPIO.
++ if( ledInfoPtr->ledMask )
++ ledOff(ledInfoPtr);
++ else
++ if( gLedHwFunc[(int) ledName] )
++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
++
++ // Next, turn on (red) the specified LED GPIO.
++ ledOnFail(ledInfoPtr);
++ break;
++
++ case kLedStateBlinkOnce:
++ // skip blinkOnce if it is already in Slow/Fast blink continues state
++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
++ ;
++ else
++ {
++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
++ {
++ ledToggle(ledInfoPtr);
++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
++ ledInfoPtr->ledState = kLedStateBlinkOnce;
++ ledTimerStart();
++ }
++ }
++ break;
++
++ case kLedStateSlowBlinkContinues:
++ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
++ ledTimerStart();
++ break;
++
++ case kLedStateFastBlinkContinues:
++ ledInfoPtr->blinkCountDown = kFastBlinkCount;
++ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
++ ledTimerStart();
++ break;
++
++ default:
++ printk("Invalid led state\n");
++ }
++}
++
++// This function is called for an LED that is controlled by hardware.
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
++{
++ if( (int) ledName < MAX_VIRT_LEDS )
++ {
++ if( ledFailType == 1 )
++ gLedHwFailFunc[(int) ledName] = ledHwFunc;
++ else
++ gLedHwFunc[(int) ledName] = ledHwFunc;
++ }
++}
++
+diff -urN linux.old/arch/mips/bcm963xx/board.c linux.dev/arch/mips/bcm963xx/board.c
+--- linux.old/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/board.c 2006-08-25 15:16:26.000000000 +0200
+@@ -0,0 +1,555 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Includes. */
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <asm/uaccess.h>
++#include <linux/wait.h>
++#include <linux/poll.h>
++#include <linux/sched.h>
++#include <linux/list.h>
++#include <linux/if.h>
++#include <linux/spinlock.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include <bcmTag.h>
++#include "boardparms.h"
++#include "bcm_intr.h"
++#include "board.h"
++#include "bcm_map_part.h"
++
++static DEFINE_SPINLOCK(board_lock);
++
++/* Typedefs. */
++#if defined (NON_CONSECUTIVE_MAC)
++// used to be the last octet. Now changed to the first 5 bits of the the forth octet
++// to reduced the duplicated MAC addresses.
++#define CHANGED_OCTET 3
++#define SHIFT_BITS 3
++#else
++#define CHANGED_OCTET 1
++#define SHIFT_BITS 0
++#endif
++
++typedef struct
++{
++ unsigned long ulId;
++ char chInUse;
++ char chReserved[3];
++} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
++
++typedef struct
++{
++ unsigned long ulSdramSize;
++ unsigned long ulPsiSize;
++ unsigned long ulNumMacAddrs;
++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ MAC_ADDR_INFO MacAddrs[1];
++} NVRAM_INFO, *PNVRAM_INFO;
++
++typedef struct
++{
++ unsigned long eventmask;
++} BOARD_IOC, *PBOARD_IOC;
++
++
++/*Dyinggasp callback*/
++typedef void (*cb_dgasp_t)(void *arg);
++typedef struct _CB_DGASP__LIST
++{
++ struct list_head list;
++ char name[IFNAMSIZ];
++ cb_dgasp_t cb_dgasp_fn;
++ void *context;
++}CB_DGASP_LIST , *PCB_DGASP_LIST;
++
++
++static LED_MAP_PAIR LedMapping[] =
++{ // led name Initial state physical pin (ledMask)
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
++};
++
++/* Externs. */
++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
++extern unsigned int nr_free_pages (void);
++extern const char *get_system_type(void);
++extern void kerSysFlashInit(void);
++extern unsigned long get_nvram_start_addr(void);
++extern unsigned long get_scratch_pad_start_addr(void);
++extern unsigned long getMemorySize(void);
++extern void __init boardLedInit(PLED_MAP_PAIR);
++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
++ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
++
++/* Prototypes. */
++void __init InitNvramInfo( void );
++
++/* DyingGasp function prototype */
++static void __init kerSysDyingGaspMapIntr(void);
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
++static void __init kerSysInitDyingGaspHandler( void );
++static void __exit kerSysDeinitDyingGaspHandler( void );
++/* -DyingGasp function prototype - */
++
++static PNVRAM_INFO g_pNvramInfo = NULL;
++static int g_ledInitialized = 0;
++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
++
++static int g_wakeup_monitor = 0;
++static struct file *g_monitor_file = NULL;
++static struct task_struct *g_monitor_task = NULL;
++static unsigned int (*g_orig_fop_poll)
++ (struct file *, struct poll_table_struct *) = NULL;
++
++void kerSysMipsSoftReset(void)
++{
++ if (PERF->RevID == 0x634800A1) {
++ typedef void (*FNPTR) (void);
++ FNPTR bootaddr = (FNPTR) FLASH_BASE;
++ int i;
++
++ /* Disable interrupts. */
++ //cli();
++ spin_lock_irq(&board_lock);
++
++ /* Reset all blocks. */
++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
++ for( i = 0; i < 1000000; i++ )
++ ;
++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
++ /* Jump to the power on address. */
++ (*bootaddr) ();
++ }
++ else
++ PERF->pll_control |= SOFT_RESET; // soft reset mips
++}
++
++
++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
++{
++ int nRet = 0;
++ PMAC_ADDR_INFO pMai = NULL;
++ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
++ PMAC_ADDR_INFO pMaiFreeId = NULL;
++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
++
++ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
++ * * à relire plusieurs fois */
++ /* inv_xde */
++ if (boot_loader_type == BOOT_CFE)
++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
++ NVRAM_MAC_ADDRESS_LEN );
++ else {
++ pucaMacAddr[0] = 0x00;
++ pucaMacAddr[1] = 0x07;
++ pucaMacAddr[2] = 0x3A;
++ pucaMacAddr[3] = 0xFF;
++ pucaMacAddr[4] = 0xFF;
++ pucaMacAddr[5] = 0xFF;
++ }
++
++ return nRet;
++} /* kerSysGetMacAddr */
++
++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
++{
++ int nRet = -EINVAL;
++ unsigned long ulIdx = 0;
++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
++
++ // if overflow 255 (negitive), add 256 to have the correct index
++ if (idx < 0)
++ idx += 256;
++ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
++
++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
++ {
++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
++ if( pMai->chInUse == 1 )
++ {
++ pMai->chInUse = 0;
++ nRet = 0;
++ }
++ }
++
++ return( nRet );
++} /* kerSysReleaseMacAddr */
++
++int kerSysGetSdramSize( void )
++{
++ if (boot_loader_type == BOOT_CFE) {
++ return( (int) g_pNvramInfo->ulSdramSize );
++ }
++ else {
++ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
++ return((int)getMemorySize() + 0x00040000);
++ }
++} /* kerSysGetSdramSize */
++
++
++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
++{
++ if (g_ledInitialized)
++ boardLedCtrl(ledName, ledState);
++}
++
++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
++{
++ int mask = (*g_orig_fop_poll) (f, t);
++
++ if( g_wakeup_monitor == 1 && g_monitor_file == f )
++ {
++ /* If g_wakeup_monitor is non-0, the user mode application needs to
++ * return from a blocking select function. Return POLLPRI which will
++ * cause the select to return with the exception descriptor set.
++ */
++ mask |= POLLPRI;
++ g_wakeup_monitor = 0;
++ }
++
++ return( mask );
++}
++
++/* Put the user mode application that monitors link state on a run queue. */
++void kerSysWakeupMonitorTask( void )
++{
++ g_wakeup_monitor = 1;
++ if( g_monitor_task )
++ wake_up_process( g_monitor_task );
++}
++
++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
++int kerSysGetResetHold(void)
++{
++ unsigned short gpio;
++
++ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
++ {
++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
++ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
++
++ if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
++ {
++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
++ gpio_reg = &GPIO->GPIOio_high;
++ }
++ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
++ if(*gpio_reg & gpio_mask) //press down
++ return RESET_BUTTON_UP;
++ }
++ return RESET_BUTTON_PRESSDOWN;
++}
++//<<JUNHON, 2004/09/15
++
++/***************************************************************************
++ * Dying gasp ISR and functions.
++ ***************************************************************************/
++#define KERSYS_DBG printk
++
++#if defined(CONFIG_BCM96345)
++#define CYCLE_PER_US 70
++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
++/* The BCM6348 cycles per microsecond is really variable since the BCM6348
++ * MIPS speed can vary depending on the PLL settings. However, an appoximate
++ * value of 120 will still work OK for the test being done.
++ */
++#define CYCLE_PER_US 120
++#endif
++#define DG_GLITCH_TO (100*CYCLE_PER_US)
++
++static void __init kerSysDyingGaspMapIntr()
++{
++ unsigned long ulIntr;
++
++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ }
++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
++ ulIntr += INTERRUPT_ID_EXTERNAL_0;
++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
++ BcmHalInterruptEnable( ulIntr );
++ }
++#endif
++
++}
++
++void kerSysSetWdTimer(ulong timeUs)
++{
++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
++ TIMER->WatchDogCtl = 0xFF00;
++ TIMER->WatchDogCtl = 0x00FF;
++}
++
++ulong kerSysGetCycleCount(void)
++{
++ ulong cnt;
++#ifdef _WIN32_WCE
++ cnt = 0;
++#else
++ __asm volatile("mfc0 %0, $9":"=d"(cnt));
++#endif
++ return(cnt);
++}
++
++static Bool kerSysDyingGaspCheckPowerLoss(void)
++{
++ ulong clk0;
++ ulong ulIntr;
++
++ ulIntr = 0;
++ clk0 = kerSysGetCycleCount();
++
++ UART->Data = 'D';
++ UART->Data = '%';
++ UART->Data = 'G';
++
++#if defined(CONFIG_BCM96345)
++ BpGetAdslDyingGaspExtIntr( &ulIntr );
++
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
++ do {
++ ulong clk1;
++
++ clk1 = kerSysGetCycleCount(); /* time cleared */
++ /* wait a little to get new reading */
++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
++ ;
++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
++
++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
++ BcmHalInterruptEnable( INTERRUPT_ID_DG );
++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
++ return 0;
++ }
++#endif
++ return 1;
++}
++
++static void kerSysDyingGaspShutdown( void )
++{
++ kerSysSetWdTimer(1000000);
++#if defined(CONFIG_BCM96345)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
++#elif defined(CONFIG_BCM96348)
++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
++#endif
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
++#else
++static unsigned int kerSysDyingGaspIsr(void)
++#endif
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp, *dsl = NULL;
++
++ if (kerSysDyingGaspCheckPowerLoss()) {
++
++ /* first to turn off everything other than dsl */
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(strncmp(tmp->name, "dsl", 3)) {
++ (tmp->cb_dgasp_fn)(tmp->context);
++ }else {
++ dsl = tmp;
++ }
++ }
++
++ /* now send dgasp */
++ if(dsl)
++ (dsl->cb_dgasp_fn)(dsl->context);
++
++ /* reset and shutdown system */
++ kerSysDyingGaspShutdown();
++ }
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++return( IRQ_HANDLED );
++#else
++ return( 1 );
++#endif
++}
++
++static void __init kerSysInitDyingGaspHandler( void )
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head != NULL) {
++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
++ return;
++ }
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ g_cb_dgasp_list_head = new_node;
++
++} /* kerSysInitDyingGaspHandler */
++
++static void __exit kerSysDeinitDyingGaspHandler( void )
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL)
++ return;
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ list_del(pos);
++ kfree(tmp);
++ }
++
++ kfree(g_cb_dgasp_list_head);
++ g_cb_dgasp_list_head = NULL;
++
++} /* kerSysDeinitDyingGaspHandler */
++
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
++{
++ CB_DGASP_LIST *new_node;
++
++ if( g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if( devname == NULL || cbfn == NULL ) {
++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
++ return;
++ }
++
++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
++ INIT_LIST_HEAD(&new_node->list);
++ strncpy(new_node->name, devname, IFNAMSIZ);
++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
++ new_node->context = context;
++ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
++
++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
++
++} /* kerSysRegisterDyingGaspHandler */
++
++void kerSysDeregisterDyingGaspHandler(char *devname)
++{
++ struct list_head *pos;
++ CB_DGASP_LIST *tmp;
++
++ if(g_cb_dgasp_list_head == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
++ return;
++ }
++
++ if(devname == NULL) {
++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
++ return;
++ }
++
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
++
++ list_for_each(pos, &g_cb_dgasp_list_head->list) {
++ tmp = list_entry(pos, CB_DGASP_LIST, list);
++ if(!strcmp(tmp->name, devname)) {
++ list_del(pos);
++ kfree(tmp);
++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
++ return;
++ }
++ }
++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
++
++} /* kerSysDeregisterDyingGaspHandler */
++
++//EXPORT_SYMBOL(kerSysNvRamGet);
++EXPORT_SYMBOL(kerSysGetMacAddress);
++EXPORT_SYMBOL(kerSysReleaseMacAddress);
++EXPORT_SYMBOL(kerSysGetSdramSize);
++EXPORT_SYMBOL(kerSysLedCtrl);
++EXPORT_SYMBOL(kerSysGetResetHold);
++EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
++EXPORT_SYMBOL(BpGetBoardIds);
++EXPORT_SYMBOL(BpGetSdramSize);
++EXPORT_SYMBOL(BpGetPsiSize);
++EXPORT_SYMBOL(BpGetEthernetMacInfo);
++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
++EXPORT_SYMBOL(BpGetVoipResetGpio);
++EXPORT_SYMBOL(BpGetVoipIntrGpio);
++EXPORT_SYMBOL(BpGetPcmciaResetGpio);
++EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
++EXPORT_SYMBOL(BpGetAdslLedGpio);
++EXPORT_SYMBOL(BpGetAdslFailLedGpio);
++EXPORT_SYMBOL(BpGetWirelessLedGpio);
++EXPORT_SYMBOL(BpGetUsbLedGpio);
++EXPORT_SYMBOL(BpGetHpnaLedGpio);
++EXPORT_SYMBOL(BpGetWanDataLedGpio);
++EXPORT_SYMBOL(BpGetPppLedGpio);
++EXPORT_SYMBOL(BpGetPppFailLedGpio);
++EXPORT_SYMBOL(BpGetVoipLedGpio);
++EXPORT_SYMBOL(BpGetWirelessExtIntr);
++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
++EXPORT_SYMBOL(BpGetVoipExtIntr);
++EXPORT_SYMBOL(BpGetHpnaExtIntr);
++EXPORT_SYMBOL(BpGetHpnaChipSelect);
++EXPORT_SYMBOL(BpGetVoipChipSelect);
++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
++EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
++EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
++EXPORT_SYMBOL(kerSysGetCycleCount);
++EXPORT_SYMBOL(kerSysSetWdTimer);
++EXPORT_SYMBOL(kerSysWakeupMonitorTask);
++
+diff -urN linux.old/arch/mips/bcm963xx/boardparms.c linux.dev/arch/mips/bcm963xx/boardparms.c
+--- linux.old/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,2391 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.c
++ *
++ * Description: This file contains the implementation for the BCM63xx board
++ * parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++/* Includes. */
++#include "boardparms.h"
++
++/* Defines. */
++
++/* Default psi size in K bytes */
++#define BP_PSI_DEFAULT_SIZE 24
++
++/* Typedefs */
++typedef struct boardparameters
++{
++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
++ unsigned short usSdramSize; /* SDRAM size and type */
++ unsigned short usPsiSize; /* persistent storage in K bytes */
++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
++ unsigned short usGpioUartRts; /* GPIO pin or not defined */
++ unsigned short usGpioUartCts; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
++ unsigned short usExtIntrWireless; /* ext intr or not defined */
++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
++ unsigned short usExtIntrHpna; /* ext intr or not defined */
++ unsigned short usCsHpna; /* chip select not defined */
++ unsigned short usAntInUseWireless; /* antenna in use or not defined */
++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
++} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
++
++/* Variables */
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++static BOARD_PARAMETERS g_bcm96338sv =
++{
++ "96338SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static BOARD_PARAMETERS g_bcm96338l2m8m =
++{
++ "96338L-2M-8M", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
++#endif
++
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++static BOARD_PARAMETERS g_bcm96345r =
++{
++ "96345R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw2 =
++{
++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
++ * Reset or RTS.
++ */
++ "96345GW2", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_GPIO_0_AH, /* usGpioPhySpiSck */
++ BP_GPIO_4_AH, /* usGpioPhySpiSs */
++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_GPIO, /* usConfigType */
++ BP_ENET_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_GPIO_13_AH, /* usGpioUartRts */
++ BP_GPIO_9_AH, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw =
++{
++ "96345GW", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_GPIO_10_AH, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_EXT_INTR_3, /* usExtIntrHpna */
++ BP_CS_1, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96335r =
++{
++ "96335R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_9_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_8_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_9_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345r0 =
++{
++ "96345R0", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345rs =
++{
++ "96345RS", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
++ &g_bcm96345rs, 0};
++#endif
++
++#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
++
++static BOARD_PARAMETERS g_bcm96348r =
++{
++ "96348R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348lv =
++{
++ "96348LV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x02, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_GPIO_5_AL, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw =
++{
++ "96348GW", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_10 =
++{
++ "96348GW-10", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw_11 =
++{
++ "96348GW-11", /* szBoardId */
++ {{BP_ENET_NO_PHY}, /* ucPhyType */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348sv =
++{
++ "96348SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x1f, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
++{
++ "96348GW-DualDSP", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_UNEQUIPPED, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_DSP, /* ucDspType */
++ 0x01, /* ucDspAddress */
++ BP_EXT_INTR_3, /* usExtIntrVoip */
++ BP_UNEQUIPPED , /* usGpioVoipReset */
++ BP_GPIO_35_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_3}}, /* usCsVoip */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcmCustom_01 =
++{
++ "BCMCUST_01", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_36_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AL, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
++ &g_bcmCustom_01, 0};
++#endif
++
++static PBOARD_PARAMETERS g_pCurrentBp = 0;
++
++/**************************************************************************
++ * Name : bpstrcmp
++ *
++ * Description: String compare for this file so it does not depend on an OS.
++ * (Linux kernel and CFE share this source file.)
++ *
++ * Parameters : [IN] dest - destination string
++ * [IN] src - source string
++ *
++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
++ ***************************************************************************/
++static int bpstrcmp(const char *dest,const char *src);
++static int bpstrcmp(const char *dest,const char *src)
++{
++ while (*src && *dest)
++ {
++ if (*dest < *src) return -1;
++ if (*dest > *src) return 1;
++ dest++;
++ src++;
++ }
++
++ if (*dest && !*src) return 1;
++ if (!*dest && *src) return -1;
++ return 0;
++} /* bpstrcmp */
++
++/**************************************************************************
++ * Name : BpGetVoipDspConfig
++ *
++ * Description: Gets the DSP configuration from the board parameter
++ * structure for a given DSP index.
++ *
++ * Parameters : [IN] dspNum - DSP index (number)
++ *
++ * Returns : Pointer to DSP configuration block if found/valid, NULL
++ * otherwise.
++ ***************************************************************************/
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
++{
++ VOIP_DSP_INFO *pDspConfig = 0;
++ int i;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
++ {
++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
++ {
++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
++ break;
++ }
++ }
++ }
++
++ return pDspConfig;
++}
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId )
++{
++ int nRet = BP_BOARD_ID_NOT_FOUND;
++ PBOARD_PARAMETERS *ppBp;
++
++ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
++ {
++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
++ {
++ g_pCurrentBp = *ppBp;
++ nRet = BP_SUCCESS;
++ break;
++ }
++ }
++
++ return( nRet );
++} /* BpSetBoardId */
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
++{
++ PBOARD_PARAMETERS *ppBp;
++ int i;
++ char *src;
++ char *dest;
++
++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
++ {
++ dest = pszBoardIds;
++ src = (*ppBp)->szBoardId;
++ while( *src )
++ *dest++ = *src++;
++ *dest = '\0';
++ }
++
++ return( i );
++} /* BpGetBoardIds */
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
++{
++ int i, nRet;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ {
++ if( i < BP_MAX_ENET_MACS )
++ {
++ unsigned char *src = (unsigned char *)
++ &g_pCurrentBp->EnetMacInfos[i];
++ unsigned char *dest = (unsigned char *) pEnetInfos;
++ int len = sizeof(ETHERNET_MAC_INFO);
++ while( len-- )
++ *dest++ = *src++;
++ }
++ else
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++ }
++
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetEthernetMacInfo */
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulSdramSize = g_pCurrentBp->usSdramSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulSdramSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetSdramSize */
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulPsiSize = g_pCurrentBp->usPsiSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulPsiSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPsiSize */
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
++
++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusInner = *pusOuter = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetRj11InnerOuterPairGpios */
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
++
++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPressAndHoldResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipReset;
++
++ if( *pusValue != BP_NOT_DEFINED ||
++ *pusValue == BP_UNEQUIPPED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipIntr;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipIntrGpio */
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
++
++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPcmciaResetGpio */
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusRts = g_pCurrentBp->usGpioUartRts;
++ *pusCts = g_pCurrentBp->usGpioUartCts;
++
++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusRts = *pusCts = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUartRtsCtsGpios */
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdsl;
++
++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslLedGpio */
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
++
++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWireless;
++
++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usAntInUseWireless;
++
++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessAntInUse */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
++
++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessSesBtnGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
++
++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesExtIntr */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
++
++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesLedGpio */
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedUsb;
++
++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUsbLedGpio */
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedHpna;
++
++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWanData;
++
++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWanDataLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPpp;
++
++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPppFail;
++
++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
++
++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderPowerOn */
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
++
++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderAlarmLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
++
++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderResetCfgLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlStop;
++
++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderStopLedGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ *
++ * Note : The VoIP structure would allow for having one LED per DSP
++ * however, the board initialization function assumes only one
++ * LED per functionality (ie one LED for VoIP). Therefore in
++ * order to keep this tidy and simple we do not make usage of the
++ * one-LED-per-DSP function. Instead, we assume that the LED for
++ * VoIP is unique and associated with DSP 0 (always present on
++ * any VoIP platform). If changing this to a LED-per-DSP function
++ * then one need to update the board initialization driver in
++ * bcmdrivers\opensource\char\board\bcm963xx\impl1
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioLedVoip;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrWireless;
++
++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessExtIntr */
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
++
++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslDyingGaspExtIntr */
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usExtIntrVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrHpna;
++
++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usCsHpna;
++
++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaChipSelect */
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usCsVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipChipSelect */
++
+diff -urN linux.old/arch/mips/bcm963xx/boardparms.h linux.dev/arch/mips/bcm963xx/boardparms.h
+--- linux.old/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,758 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.h
++ *
++ * Description: This file contains definitions and function prototypes for
++ * the BCM63xx board parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++#if !defined(_BOARDPARMS_H)
++#define _BOARDPARMS_H
++
++/* Return codes. */
++#define BP_SUCCESS 0
++#define BP_BOARD_ID_NOT_FOUND 1
++#define BP_VALUE_NOT_DEFINED 2
++#define BP_BOARD_ID_NOT_SET 3
++
++/* Values for BpGetSdramSize. */
++#define BP_MEMORY_8MB_1_CHIP 0
++#define BP_MEMORY_16MB_1_CHIP 1
++#define BP_MEMORY_32MB_1_CHIP 2
++#define BP_MEMORY_64MB_2_CHIP 3
++#define BP_MEMORY_32MB_2_CHIP 4
++#define BP_MEMORY_16MB_2_CHIP 5
++
++/* Values for EthernetMacInfo PhyType. */
++#define BP_ENET_NO_PHY 0
++#define BP_ENET_INTERNAL_PHY 1
++#define BP_ENET_EXTERNAL_PHY 2
++#define BP_ENET_EXTERNAL_SWITCH 3
++
++/* Values for EthernetMacInfo Configuration type. */
++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
++
++/* Values for EthernetMacInfo Reverse MII. */
++#define BP_ENET_NO_REVERSE_MII 0
++#define BP_ENET_REVERSE_MII 1
++
++/* Values for VoIPDSPInfo DSPType. */
++#define BP_VOIP_NO_DSP 0
++#define BP_VOIP_DSP 1
++
++
++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
++#define BP_ACTIVE_MASK 0x8000
++#define BP_ACTIVE_HIGH 0x0000
++#define BP_ACTIVE_LOW 0x8000
++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
++
++/* Values for external interrupt assignments. */
++#define BP_EXT_INTR_0 0
++#define BP_EXT_INTR_1 1
++#define BP_EXT_INTR_2 2
++#define BP_EXT_INTR_3 3
++
++/* Values for chip select assignments. */
++#define BP_CS_0 0
++#define BP_CS_1 1
++#define BP_CS_2 2
++#define BP_CS_3 3
++
++/* Value for GPIO and external interrupt fields that are not used. */
++#define BP_NOT_DEFINED 0xffff
++#define BP_HW_DEFINED 0xfff0
++#define BP_UNEQUIPPED 0xfff1
++
++/* Maximum size of the board id string. */
++#define BP_BOARD_ID_LEN 16
++
++/* Maximum number of Ethernet MACs. */
++#define BP_MAX_ENET_MACS 2
++
++/* Maximum number of VoIP DSPs. */
++#define BP_MAX_VOIP_DSP 2
++
++/* Wireless Antenna Settings. */
++#define BP_WLAN_ANT_MAIN 0
++#define BP_WLAN_ANT_AUX 1
++#define BP_WLAN_ANT_BOTH 3
++
++#if !defined(__ASSEMBLER__)
++
++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
++ * then the other fields are not valid.
++ */
++typedef struct EthernetMacInfo
++{
++ unsigned char ucPhyType; /* BP_ENET_xxx */
++ unsigned char ucPhyAddress; /* 0 to 31 */
++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
++ unsigned short numSwitchPorts; /* Number of PHY ports */
++ unsigned short usConfigType; /* Configuration type */
++ unsigned short usReverseMii; /* Reverse MII */
++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
++
++
++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
++ * then the other fields are not valid.
++ */
++typedef struct VoIPDspInfo
++{
++ unsigned char ucDspType;
++ unsigned char ucDspAddress;
++ unsigned short usExtIntrVoip;
++ unsigned short usGpioVoipReset;
++ unsigned short usGpioVoipIntr;
++ unsigned short usGpioLedVoip;
++ unsigned short usCsVoip;
++
++} VOIP_DSP_INFO;
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId );
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize );
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize );
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter );
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
++
++#endif /* __ASSEMBLER__ */
++
++#endif /* _BOARDPARMS_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6338_intr.h linux.dev/arch/mips/bcm963xx/include/6338_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6338_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6338_INTR_H
++#define __6338_INTR_H
++
++/*=====================================================================*/
++/* BCM6338 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6338 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
++
++#endif /* __BCM6338_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6338_map_part.h linux.dev/arch/mips/bcm963xx/include/6338_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6338_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,334 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6338_MAP_H
++#define __BCM6338_MAP_H
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define SPI_BASE 0xfffe0c00
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define USBS_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++
++#define SPI_CLK_EN 0x0200
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 unused0;
++ uint32 GPIODir; /* bits 7:0 */
++ uint32 unused1;
++ uint32 GPIOio; /* bits 7:0 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 vRegConfig;
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++/*
++** Spi Controller
++*/
++
++typedef struct SpiControl {
++ uint16 spiCmd; /* (0x0): SPI command */
++#define SPI_CMD_START_IMMEDIATE 3
++
++#define SPI_CMD_COMMAND_SHIFT 0
++#define SPI_CMD_DEVICE_ID_SHIFT 4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
++
++ byte spiIntStatus; /* (0x2): SPI interrupt status */
++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
++
++ byte spiIntMask; /* (0x4): SPI interrupt mask */
++#define SPI_INTR_CMD_DONE 0x01
++#define SPI_INTR_CLEAR_ALL 0x1f
++
++ byte spiStatus; /* (0x5): SPI status */
++
++ byte spiClkCfg; /* (0x6): SPI clock configuration */
++
++ byte spiFillByte; /* (0x7): SPI fill byte */
++
++ byte unused0;
++ byte spiMsgTail; /* (0x9): msgtail */
++ byte unused1;
++ byte spiRxTail; /* (0xB): rxtail */
++
++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
++
++ byte spiMsgCtl; /* (0x40) control byte */
++#define HALF_DUPLEX_W 1
++#define HALF_DUPLEX_R 2
++#define SPI_MSG_TYPE_SHIFT 6
++#define SPI_BYTE_CNT_SHIFT 0
++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
++ byte unused3[64]; /* (0xc0 - 0xff) reserved */
++} SpiControl;
++
++#define SPI ((volatile SpiControl * const) SPI_BASE)
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[1]; /* size chip select configuration */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6345_intr.h linux.dev/arch/mips/bcm963xx/include/6345_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6345_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,72 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6345_INTR_H
++#define __6345_INTR_H
++
++
++/*=====================================================================*/
++/* BCM6345 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6345 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++/* Internal peripheral interrupt IDs */
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
++
++/* DMA channel interrupt IDs */
++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
++
++
++#endif /* __BCM6345_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6345_map_part.h linux.dev/arch/mips/bcm963xx/include/6345_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6345_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6345_MAP_H
++#define __BCM6345_MAP_H
++
++
++#include "bcmtypes.h"
++#include "6345_intr.h"
++
++typedef struct IntControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define USB_CLK_EN 0x0100
++#define EMAC_CLK_EN 0x0080
++#define UART_CLK_EN 0x0008
++#define CPU_CLK_EN 0x0001
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 4
++#define EI_CLEAR_SHFT 8
++#define EI_MASK_SHFT 12
++#define EI_INSENS_SHFT 16
++#define EI_LEVEL_SHFT 20
++} IntControl;
++
++#define INTC_BASE 0xfffe0000
++#define PERF ((volatile IntControl * const) INTC_BASE)
++
++#define TIMR_BASE 0xfffe0200
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++ byte config;
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define XMITBREAK 0x40
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ uint32 baudword;
++
++ byte txf_levl;
++ byte rxf_levl;
++ byte fifocfg;
++ byte prog_out;
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense;
++ byte DeltaIPConfig_Mask;
++ byte DeltaIP_SyncIP;
++ uint16 intMask;
++ uint16 intStatus;
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOEMT 0x0020
++#define RXOVFERR 0x0080
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data;
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART_BASE 0xfffe0300
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint16 unused0;
++ byte unused1;
++ byte TBusSel;
++
++ uint16 unused2;
++ uint16 GPIODir;
++ byte unused3;
++ byte Leds;
++ uint16 GPIOio;
++
++ uint32 UartCtl;
++} GpioControl;
++
++#define GPIO_BASE 0xfffe0400
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++#define GPIO_NUM_MAX_BITS_MASK 0x0f
++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
++
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6348_intr.h linux.dev/arch/mips/bcm963xx/include/6348_intr.h
+--- linux.old/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6348_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,74 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __6348_INTR_H
++#define __6348_INTR_H
++
++
++/*=====================================================================*/
++/* BCM6348 External Interrupt Level Assignments */
++/*=====================================================================*/
++#define INTERRUPT_ID_EXTERNAL_0 3
++#define INTERRUPT_ID_EXTERNAL_1 4
++#define INTERRUPT_ID_EXTERNAL_2 5
++#define INTERRUPT_ID_EXTERNAL_3 6
++
++/*=====================================================================*/
++/* BCM6348 Timer Interrupt Level Assignments */
++/*=====================================================================*/
++#define MIPS_TIMER_INT 7
++
++/*=====================================================================*/
++/* Peripheral ISR Table Offset */
++/*=====================================================================*/
++#define INTERNAL_ISR_TABLE_OFFSET 8
++
++/*=====================================================================*/
++/* Logical Peripheral Interrupt IDs */
++/*=====================================================================*/
++
++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
++
++
++#endif /* __BCM6348_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/include/6348_map_part.h linux.dev/arch/mips/bcm963xx/include/6348_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/6348_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,500 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM6348_MAP_H
++#define __BCM6348_MAP_H
++
++#include "bcmtypes.h"
++
++#define PERF_BASE 0xfffe0000
++#define TIMR_BASE 0xfffe0200
++#define UART_BASE 0xfffe0300
++#define GPIO_BASE 0xfffe0400
++#define MPI_BASE 0xfffe2000 /* MPI control registers */
++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
++
++typedef struct PerfControl {
++ uint32 RevID;
++ uint16 testControl;
++ uint16 blkEnables;
++#define EMAC_CLK_EN 0x0010
++#define SAR_CLK_EN 0x0020
++#define USBS_CLK_EN 0x0040
++#define USBH_CLK_EN 0x0100
++
++ uint32 pll_control;
++#define SOFT_RESET 0x00000001
++
++ uint32 IrqMask;
++ uint32 IrqStatus;
++
++ uint32 ExtIrqCfg;
++#define EI_SENSE_SHFT 0
++#define EI_STATUS_SHFT 5
++#define EI_CLEAR_SHFT 10
++#define EI_MASK_SHFT 15
++#define EI_INSENS_SHFT 20
++#define EI_LEVEL_SHFT 25
++
++ uint32 unused[4]; /* (18) */
++ uint32 BlockSoftReset; /* (28) */
++#define BSR_SPI 0x00000001
++#define BSR_EMAC 0x00000004
++#define BSR_USBH 0x00000008
++#define BSR_USBS 0x00000010
++#define BSR_ADSL 0x00000020
++#define BSR_DMAMEM 0x00000040
++#define BSR_SAR 0x00000080
++#define BSR_ACLC 0x00000100
++#define BSR_ADSL_MIPS_PLL 0x00000400
++#define BSR_ALL_BLOCKS \
++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
++ uint32 unused2[2]; /* (2c) */
++ uint32 PllStrap; /* (34) */
++#define PLL_N1_SHFT 20
++#define PLL_N1_MASK (7<<PLL_N1_SHFT)
++#define PLL_N2_SHFT 15
++#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
++#define PLL_M1_REF_SHFT 12
++#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
++#define PLL_M2_REF_SHFT 9
++#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
++#define PLL_M1_CPU_SHFT 6
++#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
++#define PLL_M1_BUS_SHFT 3
++#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
++#define PLL_M2_BUS_SHFT 0
++#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
++} PerfControl;
++
++#define PERF ((volatile PerfControl * const) PERF_BASE)
++
++typedef struct Timer {
++ uint16 unused0;
++ byte TimerMask;
++#define TIMER0EN 0x01
++#define TIMER1EN 0x02
++#define TIMER2EN 0x04
++ byte TimerInts;
++#define TIMER0 0x01
++#define TIMER1 0x02
++#define TIMER2 0x04
++#define WATCHDOG 0x08
++ uint32 TimerCtl0;
++ uint32 TimerCtl1;
++ uint32 TimerCtl2;
++#define TIMERENABLE 0x80000000
++#define RSTCNTCLR 0x40000000
++ uint32 TimerCnt0;
++ uint32 TimerCnt1;
++ uint32 TimerCnt2;
++ uint32 WatchDogDefCount;
++
++ /* Write 0xff00 0x00ff to Start timer
++ * Write 0xee00 0x00ee to Stop and re-load default count
++ * Read from this register returns current watch dog count
++ */
++ uint32 WatchDogCtl;
++
++ /* Number of 40-MHz ticks for WD Reset pulse to last */
++ uint32 WDResetCount;
++} Timer;
++
++#define TIMER ((volatile Timer * const) TIMR_BASE)
++
++typedef struct UartChannel {
++ byte unused0;
++ byte control;
++#define BRGEN 0x80 /* Control register bit defs */
++#define TXEN 0x40
++#define RXEN 0x20
++#define LOOPBK 0x10
++#define TXPARITYEN 0x08
++#define TXPARITYEVEN 0x04
++#define RXPARITYEN 0x02
++#define RXPARITYEVEN 0x01
++
++ byte config;
++#define XMITBREAK 0x40
++#define BITS5SYM 0x00
++#define BITS6SYM 0x10
++#define BITS7SYM 0x20
++#define BITS8SYM 0x30
++#define ONESTOP 0x07
++#define TWOSTOP 0x0f
++ /* 4-LSBS represent STOP bits/char
++ * in 1/8 bit-time intervals. Zero
++ * represents 1/8 stop bit interval.
++ * Fifteen represents 2 stop bits.
++ */
++ byte fifoctl;
++#define RSTTXFIFOS 0x80
++#define RSTRXFIFOS 0x40
++ /* 5-bit TimeoutCnt is in low bits of this register.
++ * This count represents the number of characters
++ * idle times before setting receive Irq when below threshold
++ */
++ uint32 baudword;
++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
++ */
++
++ byte txf_levl; /* Read-only fifo depth */
++ byte rxf_levl; /* Read-only fifo depth */
++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
++ * RxThreshold. Irq can be asserted
++ * when rx fifo> thresh, txfifo<thresh
++ */
++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
++ * if these bits are also enabled to GPIO_o
++ */
++#define DTREN 0x01
++#define RTSEN 0x02
++
++ byte unused1;
++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
++ * detect irq on rising AND falling
++ * edges for corresponding GPIO_i
++ * if enabled (edge insensitive)
++ */
++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
++ * 0 for negedge sense if
++ * not configured for edge
++ * insensitive (see above)
++ * Lower 4 bits: Mask to enable change
++ * detection IRQ for corresponding
++ * GPIO_i
++ */
++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
++ * have changed (may set IRQ).
++ * read automatically clears bit
++ * Lower 4 bits are actual status
++ */
++
++ uint16 intMask; /* Same Bit defs for Mask and status */
++ uint16 intStatus;
++#define DELTAIP 0x0001
++#define TXUNDERR 0x0002
++#define TXOVFERR 0x0004
++#define TXFIFOTHOLD 0x0008
++#define TXREADLATCH 0x0010
++#define TXFIFOEMT 0x0020
++#define RXUNDERR 0x0040
++#define RXOVFERR 0x0080
++#define RXTIMEOUT 0x0100
++#define RXFIFOFULL 0x0200
++#define RXFIFOTHOLD 0x0400
++#define RXFIFONE 0x0800
++#define RXFRAMERR 0x1000
++#define RXPARERR 0x2000
++#define RXBRK 0x4000
++
++ uint16 unused2;
++ uint16 Data; /* Write to TX, Read from RX */
++ /* bits 11:8 are BRK,PAR,FRM errors */
++
++ uint32 unused3;
++ uint32 unused4;
++} Uart;
++
++#define UART ((volatile Uart * const) UART_BASE)
++
++typedef struct GpioControl {
++ uint32 GPIODir_high; /* bits 36:32 */
++ uint32 GPIODir; /* bits 31:00 */
++ uint32 GPIOio_high; /* bits 36:32 */
++ uint32 GPIOio; /* bits 31:00 */
++ uint32 LEDCtrl;
++#define LED3_STROBE 0x08000000
++#define LED2_STROBE 0x04000000
++#define LED1_STROBE 0x02000000
++#define LED0_STROBE 0x01000000
++#define LED_TEST 0x00010000
++#define LED3_DISABLE_LINK_ACT 0x00008000
++#define LED2_DISABLE_LINK_ACT 0x00004000
++#define LED1_DISABLE_LINK_ACT 0x00002000
++#define LED0_DISABLE_LINK_ACT 0x00001000
++#define LED_INTERVAL_SET_MASK 0x00000f00
++#define LED_INTERVAL_SET_320MS 0x00000500
++#define LED_INTERVAL_SET_160MS 0x00000400
++#define LED_INTERVAL_SET_80MS 0x00000300
++#define LED_INTERVAL_SET_40MS 0x00000200
++#define LED_INTERVAL_SET_20MS 0x00000100
++#define LED3_ON 0x00000080
++#define LED2_ON 0x00000040
++#define LED1_ON 0x00000020
++#define LED0_ON 0x00000010
++#define LED3_ENABLE 0x00000008
++#define LED2_ENABLE 0x00000004
++#define LED1_ENABLE 0x00000002
++#define LED0_ENABLE 0x00000001
++ uint32 SpiSlaveCfg;
++#define SPI_SLAVE_RESET 0x00010000
++#define SPI_RESTRICT 0x00000400
++#define SPI_DELAY_DISABLE 0x00000200
++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
++#define SPI_SER_ADDR_CFG_MASK 0x0000000c
++#define SPI_MODE 0x00000001
++ uint32 GPIOMode;
++#define GROUP4_DIAG 0x00090000
++#define GROUP4_UTOPIA 0x00080000
++#define GROUP4_LEGACY_LED 0x00030000
++#define GROUP4_MII_SNOOP 0x00020000
++#define GROUP4_EXT_EPHY 0x00010000
++#define GROUP3_DIAG 0x00009000
++#define GROUP3_UTOPIA 0x00008000
++#define GROUP3_EXT_MII 0x00007000
++#define GROUP2_DIAG 0x00000900
++#define GROUP2_PCI 0x00000500
++#define GROUP1_DIAG 0x00000090
++#define GROUP1_UTOPIA 0x00000080
++#define GROUP1_SPI_UART 0x00000060
++#define GROUP1_SPI_MASTER 0x00000060
++#define GROUP1_MII_PCCARD 0x00000040
++#define GROUP1_MII_SNOOP 0x00000020
++#define GROUP1_EXT_EPHY 0x00000010
++#define GROUP0_DIAG 0x00000009
++#define GROUP0_EXT_MII 0x00000007
++
++} GpioControl;
++
++#define GPIO ((volatile GpioControl * const) GPIO_BASE)
++
++/* Number to mask conversion macro used for GPIODir and GPIOio */
++#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
++#define GPIO_NUM_MAX_BITS_MASK 0x1f
++#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
++
++/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
++#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
++#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
++
++
++/*
++** External Bus Interface
++*/
++typedef struct EbiChipSelect {
++ uint32 base; /* base address in upper 24 bits */
++#define EBI_SIZE_8K 0
++#define EBI_SIZE_16K 1
++#define EBI_SIZE_32K 2
++#define EBI_SIZE_64K 3
++#define EBI_SIZE_128K 4
++#define EBI_SIZE_256K 5
++#define EBI_SIZE_512K 6
++#define EBI_SIZE_1M 7
++#define EBI_SIZE_2M 8
++#define EBI_SIZE_4M 9
++#define EBI_SIZE_8M 10
++#define EBI_SIZE_16M 11
++#define EBI_SIZE_32M 12
++#define EBI_SIZE_64M 13
++#define EBI_SIZE_128M 14
++#define EBI_SIZE_256M 15
++ uint32 config;
++#define EBI_ENABLE 0x00000001 /* .. enable this range */
++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
++#define EBI_WREN 0x00000020 /* enable posted writes */
++#define EBI_POLARITY 0x00000040 /* .. set to invert something,
++ ** don't know what yet */
++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
++#define EBI_FIFO 0x00000200 /* .. use fifo */
++#define EBI_RE 0x00000400 /* .. Reverse Endian */
++} EbiChipSelect;
++
++typedef struct MpiRegisters {
++ EbiChipSelect cs[7]; /* size chip select configuration */
++#define EBI_CS0_BASE 0
++#define EBI_CS1_BASE 1
++#define EBI_CS2_BASE 2
++#define EBI_CS3_BASE 3
++#define PCMCIA_COMMON_BASE 4
++#define PCMCIA_ATTRIBUTE_BASE 5
++#define PCMCIA_IO_BASE 6
++ uint32 unused0[2]; /* reserved */
++ uint32 ebi_control; /* ebi control */
++ uint32 unused1[4]; /* reserved */
++#define EBI_ACCESS_TIMEOUT 0x000007FF
++ uint32 pcmcia_cntl1; /* pcmcia control 1 */
++#define PCCARD_CARD_RESET 0x00040000
++#define CARDBUS_ENABLE 0x00008000
++#define PCMCIA_ENABLE 0x00004000
++#define PCMCIA_GPIO_ENABLE 0x00002000
++#define CARDBUS_IDSEL 0x00001F00
++#define VS2_OEN 0x00000080
++#define VS1_OEN 0x00000040
++#define VS2_OUT 0x00000020
++#define VS1_OUT 0x00000010
++#define VS2_IN 0x00000008
++#define VS1_IN 0x00000004
++#define CD2_IN 0x00000002
++#define CD1_IN 0x00000001
++#define VS_MASK 0x0000000C
++#define CD_MASK 0x00000003
++ uint32 unused2; /* reserved */
++ uint32 pcmcia_cntl2; /* pcmcia control 2 */
++#define PCMCIA_BYTESWAP_DIS 0x00000002
++#define PCMCIA_HALFWORD_EN 0x00000001
++#define RW_ACTIVE_CNT_BIT 2
++#define INACTIVE_CNT_BIT 8
++#define CE_SETUP_CNT_BIT 16
++#define CE_HOLD_CNT_BIT 24
++ uint32 unused3[40]; /* reserved */
++
++ uint32 sp0range; /* PCI to internal system bus address space */
++ uint32 sp0remap;
++ uint32 sp0cfg;
++ uint32 sp1range;
++ uint32 sp1remap;
++ uint32 sp1cfg;
++
++ uint32 EndianCfg;
++
++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
++
++ uint32 l2pmrange1; /* internal system bus to PCI memory space */
++#define PCI_SIZE_64K 0xFFFF0000
++#define PCI_SIZE_128K 0xFFFE0000
++#define PCI_SIZE_256K 0xFFFC0000
++#define PCI_SIZE_512K 0xFFF80000
++#define PCI_SIZE_1M 0xFFF00000
++#define PCI_SIZE_2M 0xFFE00000
++#define PCI_SIZE_4M 0xFFC00000
++#define PCI_SIZE_8M 0xFF800000
++#define PCI_SIZE_16M 0xFF000000
++#define PCI_SIZE_32M 0xFE000000
++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
++ uint32 l2pmremap1;
++#define CARDBUS_MEM 0x00000004
++#define MEM_WINDOW_EN 0x00000001
++ uint32 l2pmrange2;
++ uint32 l2pmbase2;
++ uint32 l2pmremap2;
++ uint32 l2piorange; /* internal system bus to PCI I/O space */
++ uint32 l2piobase;
++ uint32 l2pioremap;
++
++ uint32 pcimodesel;
++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
++
++ uint32 pciintstat; /* PCI interrupt mask/status */
++#define MAILBOX1_SENT 0x08
++#define MAILBOX0_SENT 0x04
++#define MAILBOX1_MSG_RCV 0x02
++#define MAILBOX0_MSG_RCV 0x01
++ uint32 locbuscntrl; /* internal system bus control */
++#define DIR_U2P_NOSWAP 0x00000002
++#define EN_PCI_GPIO 0x00000001
++ uint32 locintstat; /* internal system bus interrupt mask/status */
++#define CSERR 0x0200
++#define SERR 0x0100
++#define EXT_PCI_INT 0x0080
++#define DIR_FAILED 0x0040
++#define DIR_COMPLETE 0x0020
++#define PCI_CFG 0x0010
++ uint32 unused5[7];
++
++ uint32 mailbox0;
++ uint32 mailbox1;
++
++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
++#define PCI_CFG_REG_WRITE_EN 0x00000080
++#define PCI_CFG_ADDR 0x0000003C
++ uint32 pcicfgdata; /* internal system bus PCI configuration data */
++
++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
++ uint32 locch2intStat;
++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
++ uint32 locch2intMask;
++ uint32 unused6;
++ uint32 locch2descaddr;
++ uint32 locch2status1;
++#define LOCAL_DESC_STATE 0xE0000000
++#define PCI_DESC_STATE 0x1C000000
++#define BYTE_DONE 0x03FFC000
++#define RING_ADDR 0x00003FFF
++ uint32 locch2status2;
++#define BUFPTR_OFFSET 0x1FFF0000
++#define PCI_MASTER_STATE 0x000000C0
++#define LOC_MASTER_STATE 0x00000038
++#define CONTROL_STATE 0x00000007
++ uint32 unused7;
++
++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
++ uint32 locch1intstat;
++ uint32 locch1intmask;
++ uint32 unused8;
++ uint32 locch1descaddr;
++ uint32 locch1status1;
++ uint32 locch1status2;
++ uint32 unused9;
++
++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
++ uint32 pcich1intstat;
++ uint32 pcich1intmask;
++ uint32 pcich1descaddr;
++ uint32 pcich1status1;
++ uint32 pcich1status2;
++
++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
++ uint32 pcich2intstat;
++ uint32 pcich2intmask;
++ uint32 pcich2descaddr;
++ uint32 pcich2status1;
++ uint32 pcich2status2;
++
++ uint32 perm_id; /* permanent device and vendor id */
++ uint32 perm_rev; /* permanent revision id */
++} MpiRegisters;
++
++#define MPI ((volatile MpiRegisters * const) MPI_BASE)
++
++/* PCI configuration address space start offset 0x40 */
++#define BRCM_PCI_CONFIG_TIMER 0x40
++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
++
++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
++
++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcm_intr.h linux.dev/arch/mips/bcm963xx/include/bcm_intr.h
+--- linux.old/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcm_intr.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_INTR_H
++#define __BCM_INTR_H
++
++#ifdef __cplusplus
++ extern "C" {
++#endif
++
++#if defined(CONFIG_BCM96338)
++#include <6338_intr.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_intr.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_intr.h>
++#endif
++
++/* defines */
++struct pt_regs;
++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
++
++/* prototypes */
++extern void enable_brcm_irq(unsigned int irq);
++extern void disable_brcm_irq(unsigned int irq);
++extern int request_external_irq(unsigned int irq,
++ FN_HANDLER handler, unsigned long irqflags,
++ const char * devname, void *dev_id);
++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
++ unsigned int interruptId);
++extern void dump_intr_regs(void);
++
++/* compatibility definitions */
++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
++
++#ifdef __cplusplus
++ }
++#endif
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/bcm_map_part.h linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h
+--- linux.old/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,34 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++#ifndef __BCM_MAP_PART_H
++#define __BCM_MAP_PART_H
++
++#if defined(CONFIG_BCM96338)
++#include <6338_map_part.h>
++#endif
++#if defined(CONFIG_BCM96345)
++#include <6345_map_part.h>
++#endif
++#if defined(CONFIG_BCM96348)
++#include <6348_map_part.h>
++#endif
++
++#endif
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmpci.h linux.dev/arch/mips/bcm963xx/include/bcmpci.h
+--- linux.old/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmpci.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,87 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
++//
++#ifndef BCMPCI_H
++#define BCMPCI_H
++
++/* Memory window in internal system bus address space */
++#define BCM_PCI_MEM_BASE 0x08000000
++/* IO window in internal system bus address space */
++#define BCM_PCI_IO_BASE 0x0C000000
++
++#define BCM_PCI_ADDR_MASK 0x1fffffff
++
++/* Memory window size (range) */
++#define BCM_PCI_MEM_SIZE_16MB 0x01000000
++/* IO window size (range) */
++#define BCM_PCI_IO_SIZE_64KB 0x00010000
++
++/* PCI Configuration and I/O space acesss */
++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
++
++/* fake USB PCI slot */
++#define USB_HOST_SLOT 9
++#define USB_BAR0_MEM_SIZE 0x0800
++
++#define BCM_HOST_MEM_SPACE1 0x10000000
++#define BCM_HOST_MEM_SPACE2 0x00000000
++
++/*
++ * EBI bus clock is 33MHz and share with PCI bus
++ * each clock cycle is 30ns.
++ */
++/* attribute memory access wait cnt for 4306 */
++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
++
++/* common memory access wait cnt for 4306 */
++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
++
++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
++#define PCCARD_VCC_33V 0x00010000
++#define PCCARD_VCC_50V 0x00020000
++
++typedef enum {
++ MPI_CARDTYPE_NONE, // No Card in slot
++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
++} CardType;
++
++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
++
++#define pcmciaAttrOffset 0x00200000
++#define pcmciaMemOffset 0x00000000
++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
++// Base Address is that mapped into the MPI ChipSelect registers.
++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
++#define pcmciaBase 0xbf000000
++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
++#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
++#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmTag.h linux.dev/arch/mips/bcm963xx/include/bcmTag.h
+--- linux.old/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmTag.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,153 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++//**************************************************************************************
++// File Name : bcmTag.h
++//
++// Description: add tag with validation system to the firmware image file to be uploaded
++// via http
++//
++// Created : 02/28/2002 seanl
++//**************************************************************************************
++
++#ifndef _BCMTAG_H_
++#define _BCMTAG_H_
++
++
++#define BCM_SIG_1 "Broadcom Corporation"
++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
++
++#define BCM_TAG_VER "6"
++#define BCM_TAG_VER_LAST "26"
++
++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
++#define TAG_LEN 256
++#define TAG_VER_LEN 4
++#define SIG_LEN 20
++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
++#define CHIP_ID_LEN 6
++#define IMAGE_LEN 10
++#define ADDRESS_LEN 12
++#define FLAG_LEN 2
++#define TOKEN_LEN 20
++#define BOARD_ID_LEN 16
++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
++
++
++// TAG for downloadable image (kernel plus file system)
++typedef struct _FILE_TAG
++{
++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
++ unsigned char signiture_1[SIG_LEN]; // text line for company info
++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
++ unsigned char chipId[CHIP_ID_LEN]; // chip id
++ unsigned char boardId[BOARD_ID_LEN]; // board id
++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
++ unsigned char reserved[RESERVED_LEN]; // reserved for later use
++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
++ // now will be 4 unsigned char crc
++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
++} FILE_TAG, *PFILE_TAG;
++
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC_LEN 4
++
++// only included if for bcmTag.exe program
++#ifdef BCMTAG_EXE_USE
++
++static unsigned long Crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
++#endif // BCMTAG_USE
++
++
++#endif // _BCMTAG_H_
++
+diff -urN linux.old/arch/mips/bcm963xx/include/bcmtypes.h linux.dev/arch/mips/bcm963xx/include/bcmtypes.h
+--- linux.old/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/bcmtypes.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++//
++// bcmtypes.h - misc useful typedefs
++//
++#ifndef BCMTYPES_H
++#define BCMTYPES_H
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++
++#ifndef _TYPEDEFS_H_
++typedef unsigned char uint8;
++typedef unsigned short uint16;
++typedef unsigned long uint32;
++typedef signed char int8;
++typedef signed short int16;
++typedef signed long int32;
++#if !defined(__cplusplus)
++typedef int bool;
++#endif
++#endif
++
++typedef unsigned char byte;
++// typedef unsigned long sem_t;
++
++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
++typedef signed long LONG,*PLONG;
++
++typedef unsigned int *PUINT;
++typedef signed int INT;
++
++typedef unsigned short *PUSHORT;
++typedef signed short SHORT,*PSHORT;
++typedef unsigned short WORD,*PWORD;
++
++typedef unsigned char *PUCHAR;
++typedef signed char *PCHAR;
++
++typedef void *PVOID;
++
++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
++
++typedef unsigned char BYTE,*PBYTE;
++
++//#ifndef __GNUC__
++//The following has been defined in Vxworks internally: vxTypesOld.h
++//redefine under vxworks will cause error
++typedef signed int *PINT;
++
++typedef signed char INT8;
++typedef signed short INT16;
++typedef signed long INT32;
++
++typedef unsigned char UINT8;
++typedef unsigned short UINT16;
++typedef unsigned long UINT32;
++
++typedef unsigned char UCHAR;
++typedef unsigned short USHORT;
++typedef unsigned int UINT;
++typedef unsigned long ULONG;
++
++typedef void VOID;
++typedef unsigned char BOOL;
++
++//#endif /* __GNUC__ */
++
++
++// These are also defined in typedefs.h in the application area, so I need to
++// protect against re-definition.
++#ifndef TYPEDEFS_H
++
++// Maximum and minimum values for a signed 16 bit integer.
++#define MAX_INT16 32767
++#define MIN_INT16 -32768
++
++// Useful for true/false return values. This uses the
++// Taligent notation (k for constant).
++typedef enum
++{
++ kFalse = 0,
++ kTrue = 1
++} Bool;
++
++#endif
++
++/* macros to protect against unaligned accesses */
++
++#if 0
++/* first arg is an address, second is a value */
++#define PUT16( a, d ) { \
++ *((byte *)a) = (byte)((d)>>8); \
++ *(((byte *)a)+1) = (byte)(d); \
++}
++
++#define PUT32( a, d ) { \
++ *((byte *)a) = (byte)((d)>>24); \
++ *(((byte *)a)+1) = (byte)((d)>>16); \
++ *(((byte *)a)+2) = (byte)((d)>>8); \
++ *(((byte *)a)+3) = (byte)(d); \
++}
++
++/* first arg is an address, returns a value */
++#define GET16( a ) ( \
++ (*((byte *)a) << 8) | \
++ (*(((byte *)a)+1)) \
++)
++
++#define GET32( a ) ( \
++ (*((byte *)a) << 24) | \
++ (*(((byte *)a)+1) << 16) | \
++ (*(((byte *)a)+2) << 8) | \
++ (*(((byte *)a)+3)) \
++)
++#endif
++
++#ifndef YES
++#define YES 1
++#endif
++
++#ifndef NO
++#define NO 0
++#endif
++
++#ifndef IN
++#define IN
++#endif
++
++#ifndef OUT
++#define OUT
++#endif
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
++
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/include/board.h linux.dev/arch/mips/bcm963xx/include/board.h
+--- linux.old/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/include/board.h 2006-08-25 01:52:34.000000000 +0200
+@@ -0,0 +1,373 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/***********************************************************************/
++/* */
++/* MODULE: board.h */
++/* DATE: 97/02/18 */
++/* PURPOSE: Board specific information. This module should include */
++/* all base device addresses and board specific macros. */
++/* */
++/***********************************************************************/
++#ifndef _BOARD_H
++#define _BOARD_H
++
++/*****************************************************************************/
++/* Misc board definitions */
++/*****************************************************************************/
++
++#define DYING_GASP_API
++
++/*****************************************************************************/
++/* Physical Memory Map */
++/*****************************************************************************/
++
++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++#define FLASH45_BLKS_BOOT_ROM 1
++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
++
++/*****************************************************************************/
++/* Note that the addresses above are physical addresses and that programs */
++/* have to use converted addresses defined below: */
++/*****************************************************************************/
++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
++
++/*****************************************************************************/
++/* Select the PLL value to get the desired CPU clock frequency. */
++/* */
++/* */
++/*****************************************************************************/
++#define FPERIPH 50000000
++
++#define SDRAM_TYPE_ADDRESS_OFFSET 16
++#define NVRAM_DATA_OFFSET 0x0580
++#define NVRAM_DATA_ID 0x0f1e2d3c
++#define BOARD_SDRAM_TYPE *(unsigned long *) \
++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
++
++#define ONEK 1024
++#define BLK64K (64*ONEK)
++
++// nvram and psi flash definitions for 45
++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
++
++/*****************************************************************************/
++/* NVRAM Offset and definition */
++/*****************************************************************************/
++
++#define NVRAM_VERSION_NUMBER 2
++#define NVRAM_VERSION_NUMBER_ADDRESS 0
++
++#define NVRAM_BOOTLINE_LEN 256
++#define NVRAM_BOARD_ID_STRING_LEN 16
++#define NVRAM_MAC_ADDRESS_LEN 6
++#define NVRAM_MAC_COUNT_MAX 32
++
++/*****************************************************************************/
++/* Misc Offsets */
++/*****************************************************************************/
++
++#define CFE_VERSION_OFFSET 0x0570
++#define CFE_VERSION_MARK_SIZE 5
++#define CFE_VERSION_SIZE 5
++
++typedef struct
++{
++ unsigned long ulVersion;
++ char szBootline[NVRAM_BOOTLINE_LEN];
++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
++ unsigned long ulReserved1[2];
++ unsigned long ulNumMacAddrs;
++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
++ char chReserved[2];
++ unsigned long ulCheckSum;
++} NVRAM_DATA, *PNVRAM_DATA;
++
++
++/*****************************************************************************/
++/* board ioctl calls for flash, led and some other utilities */
++/*****************************************************************************/
++
++
++/* Defines. for board driver */
++#define BOARD_IOCTL_MAGIC 'B'
++#define BOARD_DRV_MAJOR 206
++
++#define MAC_ADDRESS_ANY (unsigned long) -1
++
++#define BOARD_IOCTL_FLASH_INIT \
++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_WRITE \
++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_FLASH_READ \
++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NR_PAGES \
++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_DUMP_ADDR \
++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MEMORY \
++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_MIPS_SOFT_RESET \
++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_LED_CTRL \
++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_PSI_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_SDRAM_SIZE \
++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_MONITOR_FD \
++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_BOOTLINE \
++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CHIP_ID \
++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_NUM_ENET \
++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_CFE_VER \
++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_ENET_CFG \
++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_GET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
++
++#define BOARD_IOCTL_SET_SES_LED \
++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
++
++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
++#define RESET_BUTTON_UP 1
++#define RESET_BUTTON_PRESSDOWN 0
++#define BOARD_IOCTL_GET_RESETHOLD \
++ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
++//>>JUNHON, 2004/09/15
++
++// for the action in BOARD_IOCTL_PARMS for flash operation
++typedef enum
++{
++ PERSISTENT,
++ NVRAM,
++ BCM_IMAGE_CFE,
++ BCM_IMAGE_FS,
++ BCM_IMAGE_KERNEL,
++ BCM_IMAGE_WHOLE,
++ SCRATCH_PAD,
++ FLASH_SIZE,
++} BOARD_IOCTL_ACTION;
++
++
++typedef struct boardIoctParms
++{
++ char *string;
++ char *buf;
++ int strLen;
++ int offset;
++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
++ int result;
++} BOARD_IOCTL_PARMS;
++
++
++// LED defines
++typedef enum
++{
++ kLedAdsl,
++ kLedWireless,
++ kLedUsb,
++ kLedHpna,
++ kLedWanData,
++ kLedPPP,
++ kLedVoip,
++ kLedSes,
++ kLedLan,
++ kLedSelfTest,
++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
++} BOARD_LED_NAME;
++
++typedef enum
++{
++ kLedStateOff, /* turn led off */
++ kLedStateOn, /* turn led on */
++ kLedStateFail, /* turn led on red */
++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
++} BOARD_LED_STATE;
++
++
++// virtual and physical map pair defined in board.c
++typedef struct ledmappair
++{
++ BOARD_LED_NAME ledName; // virtual led name
++ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
++ unsigned short ledMask; // physical GPIO pin mask
++ unsigned short ledActiveLow; // reset bit to turn on LED
++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
++ unsigned short ledActiveLowFail;// reset bit to turn on LED
++} LED_MAP_PAIR, *PLED_MAP_PAIR;
++
++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
++
++/* Flash storage address information that is determined by the flash driver. */
++typedef struct flashaddrinfo
++{
++ int flash_persistent_start_blk;
++ int flash_persistent_number_blk;
++ int flash_persistent_length;
++ unsigned long flash_persistent_blk_offset;
++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
++ int flash_scratch_pad_number_blk;
++ int flash_scratch_pad_length;
++ unsigned long flash_scratch_pad_blk_offset;
++ int flash_nvram_start_blk;
++ int flash_nvram_number_blk;
++ int flash_nvram_length;
++ unsigned long flash_nvram_blk_offset;
++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
++
++// scratch pad defines
++/* SP - Persisten Scratch Pad format:
++ sp header : 32 bytes
++ tokenId-1 : 8 bytes
++ tokenId-1 len : 4 bytes
++ tokenId-1 data
++ ....
++ tokenId-n : 8 bytes
++ tokenId-n len : 4 bytes
++ tokenId-n data
++*/
++
++#define MAGIC_NUM_LEN 8
++#define MAGIC_NUMBER "gOGoBrCm"
++#define TOKEN_NAME_LEN 16
++#define SP_VERSION 1
++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
++#define SP_RESERVERD 16
++
++typedef struct _SP_HEADER
++{
++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
++ int SPVersion; // version number
++ int SPUsedLen; // used sp len
++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
++} SP_HEADER, *PSP_HEADER;
++
++typedef struct _TOKEN_DEF
++{
++ char tokenName[TOKEN_NAME_LEN];
++ int tokenLen;
++} SP_TOKEN, *PSP_TOKEN;
++
++
++/*****************************************************************************/
++/* Function Prototypes */
++/*****************************************************************************/
++#if !defined(__ASM_ASM_H)
++void dumpaddr( unsigned char *pAddr, int nLen );
++
++int kerSysNvRamGet(char *string, int strLen, int offset);
++int kerSysNvRamSet(char *string, int strLen, int offset);
++int kerSysPersistentGet(char *string, int strLen, int offset);
++int kerSysPersistentSet(char *string, int strLen, int offset);
++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
++int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
++int kerSysReleaseMacAddress( unsigned char *pucaAddr );
++int kerSysGetSdramSize( void );
++void kerSysGetBootline(char *string, int strLen);
++void kerSysSetBootline(char *string, int strLen);
++void kerSysMipsSoftReset(void);
++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
++int kerSysFlashSizeGet(void);
++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
++void kerSysDeregisterDyingGaspHandler(char *devname);
++void kerSysWakeupMonitorTask( void );
++#endif
++
++#define BOOT_CFE 0
++#define BOOT_REDBOOT 1
++
++extern int boot_loader_type;
++
++#endif /* _BOARD_H */
++
+diff -urN linux.old/arch/mips/bcm963xx/int-handler.S linux.dev/arch/mips/bcm963xx/int-handler.S
+--- linux.old/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/int-handler.S 2006-08-25 02:13:33.000000000 +0200
+@@ -0,0 +1,59 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic interrupt handler for Broadcom MIPS boards
++ */
++
++#include <linux/config.h>
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/*
++ * MIPS IRQ Source
++ * -------- ------
++ * 0 Software (ignored)
++ * 1 Software (ignored)
++ * 2 Combined hardware interrupt (hw0)
++ * 3 Hardware
++ * 4 Hardware
++ * 5 Hardware
++ * 6 Hardware
++ * 7 R4k timer
++ */
++
++ .text
++ .set noreorder
++ .set noat
++ .align 5
++ NESTED(brcmIRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set noreorder
++ .set at
++
++ jal plat_irq_dispatch
++ move a0, sp
++
++ j ret_from_irq
++ nop
++
++ END(brcmIRQ)
+diff -urN linux.old/arch/mips/bcm963xx/irq.c linux.dev/arch/mips/bcm963xx/irq.c
+--- linux.old/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/irq.c 2006-08-25 03:54:34.000000000 +0200
+@@ -0,0 +1,256 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Interrupt control functions for Broadcom 963xx MIPS boards
++ */
++
++#include <asm/atomic.h>
++
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/signal.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static void irq_dispatch_int(struct pt_regs *regs)
++{
++ unsigned int pendingIrqs;
++ static unsigned int irqBit;
++ static unsigned int isrNumber = 31;
++
++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
++ if (!pendingIrqs) {
++ return;
++ }
++
++ while (1) {
++ irqBit <<= 1;
++ isrNumber++;
++ if (isrNumber == 32) {
++ isrNumber = 0;
++ irqBit = 0x1;
++ }
++ if (pendingIrqs & irqBit) {
++ PERF->IrqMask &= ~irqBit; // mask
++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs);
++ break;
++ }
++ }
++}
++
++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs)
++{
++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
++ printk("**** Ext IRQ mask. Should not dispatch ****\n");
++ }
++ /* disable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ do_IRQ(irq, regs);
++}
++
++
++extern void brcm_timer_interrupt(struct pt_regs *regs);
++
++asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
++{
++ u32 cause;
++ while((cause = (read_c0_cause()& CAUSEF_IP))) {
++ if (cause & CAUSEF_IP7)
++ brcm_timer_interrupt(regs);
++ else if (cause & CAUSEF_IP2)
++ irq_dispatch_int(regs);
++ else if (cause & CAUSEF_IP3)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
++ else if (cause & CAUSEF_IP4)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
++ else if (cause & CAUSEF_IP5)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
++ else if (cause & CAUSEF_IP6)
++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
++ local_irq_disable();
++ }
++}
++
++
++void enable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* enable and clear interrupt in the controller */
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void disable_brcm_irq(unsigned int irq)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
++ }
++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
++ /* disable interrupt in the controller */
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
++ }
++ local_irq_restore(flags);
++}
++
++void ack_brcm_irq(unsigned int irq)
++{
++ /* Already done in brcm_irq_dispatch */
++}
++
++unsigned int startup_brcm_irq(unsigned int irq)
++{
++ enable_brcm_irq(irq);
++
++ return 0; /* never anything pending */
++}
++
++unsigned int startup_brcm_none(unsigned int irq)
++{
++ return 0;
++}
++
++void end_brcm_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_brcm_irq(irq);
++}
++
++void end_brcm_none(unsigned int irq)
++{
++}
++
++static struct hw_interrupt_type brcm_irq_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_irq,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_irq,
++ .set_affinity = NULL
++};
++
++static struct hw_interrupt_type brcm_irq_no_end_type = {
++ .typename = "MIPS",
++ .startup = startup_brcm_none,
++ .shutdown = disable_brcm_irq,
++ .enable = enable_brcm_irq,
++ .disable = disable_brcm_irq,
++ .ack = ack_brcm_irq,
++ .end = end_brcm_none,
++ .set_affinity = NULL
++};
++
++void __init arch_init_irq(void)
++{
++ int i;
++
++ clear_c0_status(ST0_BEV);
++ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4));
++
++ for (i = 0; i < NR_IRQS; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &brcm_irq_type;
++ }
++}
++
++int request_external_irq(unsigned int irq,
++ FN_HANDLER handler,
++ unsigned long irqflags,
++ const char * devname,
++ void *dev_id)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive
++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered
++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level
++
++ local_irq_restore(flags);
++
++ return( request_irq(irq, handler, irqflags, devname, dev_id) );
++}
++
++/* VxWorks compatibility function(s). */
++
++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
++ unsigned int interruptId)
++{
++ int nRet = -1;
++ char *devname;
++
++ devname = kmalloc(16, GFP_KERNEL);
++ if (devname)
++ sprintf( devname, "brcm_%d", interruptId );
++
++ /* Set the IRQ description to not automatically enable the interrupt at
++ * the end of an ISR. The driver that handles the interrupt must
++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
++ * is consistent with interrupt handling on VxWorks.
++ */
++ irq_desc[interruptId].handler = &brcm_irq_no_end_type;
++
++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
++ {
++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
++ {
++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
++ devname, (void *) param );
++ }
++
++ return( nRet );
++}
++
++
++EXPORT_SYMBOL(enable_brcm_irq);
++EXPORT_SYMBOL(disable_brcm_irq);
++EXPORT_SYMBOL(request_external_irq);
++EXPORT_SYMBOL(BcmHalMapInterrupt);
++
+diff -urN linux.old/arch/mips/bcm963xx/Kconfig linux.dev/arch/mips/bcm963xx/Kconfig
+--- linux.old/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/Kconfig 2006-08-25 01:22:39.000000000 +0200
+@@ -0,0 +1,138 @@
++# Kernel and Driver configuration for Broadcom Commengine ADSL board
++choice
++ prompt "Broadcom Commengine ADSL board"
++ depends on MIPS_BRCM
++ default BCM96345
++ help
++ Select different Broadcom ADSL board
++
++config BCM96338
++ bool "96338 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96345
++ bool "96345 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++config BCM96348
++ bool "96348 ADSL board"
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++
++endchoice
++
++config BCM_BOARD
++ bool "Support for Broadcom Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL
++ bool "Support for Serial Port"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET
++ tristate "Support for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB
++ tristate "Support for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN
++ tristate "Support for Wireless"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PCI
++ bool "Support for PCI"
++ depends on BCM96338 || BCM96345 || BCM96348
++ select PCI
++
++config BCM_ATMAPI
++ tristate "Support for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST
++ tristate "Support for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL
++ tristate "Support for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT
++ tristate "Support for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS
++ tristate "Support for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL
++ tristate "Support for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY
++ tristate "Support for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA
++ tristate "Support for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BOARD_IMPL
++ int "Implementation index for ADSL Board"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SERIAL_IMPL
++ int "Implementation index for Serial"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENET_IMPL
++ int "Implementation index for Ethernet"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_USB_IMPL
++ int "Implementation index for USB"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_WLAN_IMPL
++ int "Implementation index for WIRELESS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMAPI_IMPL
++ int "Implementation index for ATM"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ATMTEST_IMPL
++ int "Implementation index for ATM Diagnostic"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_BLAA_IMPL
++ int "Implementation index for BLAA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ADSL_IMPL
++ int "Implementation index for ADSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_ENDPOINT_IMPL
++ int "Implementation index for VOICE"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_PROCFS_IMPL
++ int "Implementation index for PROCFS"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_VDSL_IMPL
++ int "Implementation index for VDSL"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_SECURITY_IMPL
++ int "Implementation index for SECURITY"
++ depends on BCM96338 || BCM96345 || BCM96348
++
++config BCM_HPNA_IMPL
++ int "Implementation index for HPNA"
++ depends on BCM96338 || BCM96345 || BCM96348
++
+diff -urN linux.old/arch/mips/bcm963xx/Makefile linux.dev/arch/mips/bcm963xx/Makefile
+--- linux.old/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/Makefile 2006-08-25 02:04:27.000000000 +0200
+@@ -0,0 +1,23 @@
++#
++# Makefile for generic Broadcom MIPS boards
++#
++# Copyright (C) 2004 Broadcom Corporation
++#
++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
++
++SRCBASE := $(TOPDIR)
++EXTRA_CFLAGS += -I$(SRCBASE)/include
++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
++
++
++ifeq "$(ADSL)" "ANNEX_B"
++EXTRA_CFLAGS += -DADSL_ANNEXB
++endif
++ifeq "$(ADSL)" "SADSL"
++EXTRA_CFLAGS += -DADSL_SADSL
++endif
++ifeq "$(ADSL)" "ANNEX_C"
++EXTRA_CFLAGS += -DADSL_ANNEXC
++endif
++
+diff -urN linux.old/arch/mips/bcm963xx/prom.c linux.dev/arch/mips/bcm963xx/prom.c
+--- linux.old/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/prom.c 2006-08-25 01:49:57.000000000 +0200
+@@ -0,0 +1,128 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * prom.c: PROM library initialization code.
++ *
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <linux/blkdev.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/cpu.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++#include "boardparms.h"
++#include "softdsl/AdslCoreDefs.h"
++
++
++//char arcs_cmdline[CL_SIZE] __initdata = {0};
++/* inv_xde */
++int boot_loader_type;
++
++extern int do_syslog(int, char *, int);
++extern void serial_init(void);
++extern void __init InitNvramInfo( void );
++extern void kerSysFlashInit( void );
++extern unsigned long get_nvram_start_addr(void);
++void __init create_root_nfs_cmdline( char *cmdline );
++
++#define MACH_BCM MACH_BCM96348
++
++const char *get_system_type(void)
++{
++ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
++
++ return( pNvramData->szBoardId );*/
++ return "brcm63xx";
++}
++
++unsigned long getMemorySize(void)
++{
++ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
++
++ unsigned long ulSdramSize;
++
++ switch( ulSdramType )
++ {
++ case BP_MEMORY_16MB_1_CHIP:
++ case BP_MEMORY_16MB_2_CHIP:
++ ulSdramSize = 16 * 1024 * 1024;
++ break;
++ case BP_MEMORY_32MB_1_CHIP:
++ case BP_MEMORY_32MB_2_CHIP:
++ ulSdramSize = 32 * 1024 * 1024;
++ break;
++ case BP_MEMORY_64MB_2_CHIP:
++ ulSdramSize = 64 * 1024 * 1024;
++ break;
++ default:
++ ulSdramSize = 8 * 1024 * 1024;
++ break;
++ }
++ if (boot_loader_type == BOOT_CFE)
++ return ulSdramSize;
++ else
++ // assume that there is one contiguous memory map
++ return boot_mem_map.map[0].size;
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_init
++ -------------------------------------------------------------------------- */
++void __init prom_init(void)
++{
++ extern ulong r4k_interval;
++
++ serial_init();
++
++ /* Need to fixup boot loader detection code
++ * whithout changing prom_init prototype
++ */
++
++ do_syslog(8, NULL, 8);
++
++ printk( "%s prom init\n", get_system_type() );
++
++ PERF->IrqMask = 0;
++
++ arcs_cmdline[0] = '\0';
++
++ if (boot_loader_type == BOOT_CFE)
++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++ else
++ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
++
++ mips_machgroup = MACH_GROUP_BRCM;
++ mips_machtype = MACH_BCM;
++}
++
++/* --------------------------------------------------------------------------
++ Name: prom_free_prom_memory
++Abstract:
++ -------------------------------------------------------------------------- */
++void __init prom_free_prom_memory(void)
++{
++
++}
++
+diff -urN linux.old/arch/mips/bcm963xx/ser_init.c linux.dev/arch/mips/bcm963xx/ser_init.c
+--- linux.old/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/ser_init.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,180 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Broadcom bcm63xx serial port initialization, also prepare for printk
++ * by registering with console_init
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++
++#include <asm/addrspace.h>
++#include <asm/irq.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++#include <asm/mc146818rtc.h>
++
++#include <bcm_map_part.h>
++#include <board.h>
++
++#define SER63XX_DEFAULT_BAUD 115200
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++#define stUart ((volatile Uart * const) UART_BASE)
++
++// Transmit interrupts
++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR)
++// Receive interrupts
++#define RXINT (RXFIFONE | RXOVFERR)
++
++/* --------------------------------------------------------------------------
++ Name: serial_init
++ Purpose: Initalize the UART
++-------------------------------------------------------------------------- */
++void __init serial_init(void)
++{
++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
++ ULONG clockFreqHz;
++
++#if defined(CONFIG_BCM96345)
++ // Make sure clock is ticking
++ PERF->blkEnables |= UART_CLK_EN;
++#endif
++
++ /* Dissable channel's receiver and transmitter. */
++ stUart->control &= ~(BRGEN|TXEN|RXEN);
++
++ /*--------------------------------------------------------------------*/
++ /* Write the table value to the clock select register. */
++ /* DPullen - this is the equation to use: */
++ /* value = clockFreqHz / baud / 32-1; */
++ /* (snmod) Actually you should also take into account any necessary */
++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */
++ /* and subtract 1. If 1, just divide by 2 */
++ /*--------------------------------------------------------------------*/
++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ tmpVal = (clockFreqHz / tmpVal) / 16;
++ if( tmpVal & 0x01 )
++ tmpVal /= 2; //Rounding up, so sub is already accounted for
++ else
++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
++ stUart->baudword = tmpVal;
++
++ /* Finally, re-enable the transmitter and receiver. */
++ stUart->control |= (BRGEN|TXEN|RXEN);
++
++ stUart->config = (BITS8SYM | ONESTOP);
++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA;
++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ stUart->intMask = 0;
++ stUart->intMask = RXINT | TXINT;
++}
++
++
++/* prom_putc()
++ * Output a character to the UART
++ */
++void prom_putc(char c)
++{
++ /* Wait for Tx uffer to empty */
++ while (! (READ16(stUart->intStatus) & TXFIFOEMT));
++ /* Send character */
++ stUart->Data = c;
++}
++
++/* prom_puts()
++ * Write a string to the UART
++ */
++void prom_puts(const char *s)
++{
++ while (*s) {
++ if (*s == '\n') {
++ prom_putc('\r');
++ }
++ prom_putc(*s++);
++ }
++}
++
++
++/* prom_getc_nowait()
++ * Returns a character from the UART
++ * Returns -1 if no characters available or corrupted
++ */
++int prom_getc_nowait(void)
++{
++ uint16 uStatus;
++ int cData = -1;
++
++ uStatus = READ16(stUart->intStatus);
++
++ if (uStatus & RXFIFONE) { /* Do we have a character? */
++ cData = READ16(stUart->Data) & 0xff; /* Read character */
++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */
++ cData = -1;
++ }
++ }
++
++ return cData;
++}
++
++/* prom_getc()
++ * Returns a charcter from the serial port
++ * Will block until it receives a valid character
++*/
++char prom_getc(void)
++{
++ int cData = -1;
++
++ /* Loop until we get a valid character */
++ while(cData == -1) {
++ cData = prom_getc_nowait();
++ }
++ return (char) cData;
++}
++
++/* prom_testc()
++ * Returns 0 if no characters available
++ */
++int prom_testc(void)
++{
++ uint16 uStatus;
++
++ uStatus = READ16(stUart->intStatus);
++
++ return (uStatus & RXFIFONE);
++}
++
++#if defined (CONFIG_REMOTE_DEBUG)
++/* Prevent other code from writing to the serial port */
++void _putc(char c) { }
++void _puts(const char *ptr) { }
++#else
++/* Low level outputs call prom routines */
++void _putc(char c) {
++ prom_putc(c);
++}
++void _puts(const char *ptr) {
++ prom_puts(ptr);
++}
++#endif
+diff -urN linux.old/arch/mips/bcm963xx/setup.c linux.dev/arch/mips/bcm963xx/setup.c
+--- linux.old/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/setup.c 2006-08-25 02:26:58.000000000 +0200
+@@ -0,0 +1,525 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Generic setup routines for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/kdev_t.h>
++#include <linux/types.h>
++#include <linux/console.h>
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/pm.h>
++
++#include <asm/addrspace.h>
++#include <asm/bcache.h>
++#include <asm/irq.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
++#include <asm/gdb-stub.h>
++
++extern void brcm_time_init(void);
++extern void brcm_timer_setup(struct irqaction *irq);
++extern unsigned long getMemorySize(void);
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++#endif
++
++/* This function should be in a board specific directory. For now,
++ * assume that all boards that include this file use a Broadcom chip
++ * with a soft reset bit in the PLL control register.
++ */
++static void brcm_machine_restart(char *command)
++{
++ const unsigned long ulSoftReset = 0x00000001;
++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
++ *pulPllCtrl |= ulSoftReset;
++}
++
++static void brcm_machine_halt(void)
++{
++ printk("System halted\n");
++ while (1);
++}
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++
++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
++{
++ /* write index then value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ mpi->pcicfgdata = value;
++}
++
++static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
++{
++ /* write index then get value */
++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
++ return mpi->pcicfgdata;
++}
++
++/*
++ * mpi_ResetPcCard: Set/Reset the PcCard
++ */
++static void mpi_ResetPcCard(int cardtype, BOOL bReset)
++{
++ if (cardtype == MPI_CARDTYPE_NONE) {
++ return;
++ }
++
++ if (cardtype == MPI_CARDTYPE_CARDBUS) {
++ bReset = ! bReset;
++ }
++
++ if (bReset) {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ } else {
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
++ }
++}
++
++/*
++ * mpi_ConfigCs: Configure an MPI/EBI chip select
++ */
++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
++{
++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
++ mpi->cs[cs].config = flags;
++}
++
++/*
++ * mpi_InitPcmciaSpace
++ */
++static void mpi_InitPcmciaSpace(void)
++{
++ // ChipSelect 4 controls PCMCIA Memory accesses
++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 5 controls PCMCIA Attribute accesses
++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
++ // ChipSelect 6 controls PCMCIA I/O accesses
++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
++
++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) |
++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) |
++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
++
++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
++}
++
++/*
++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
++ *
++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc
++ * CCD1# CCD2# CVS1 CVS2 Type
++ *
++ * GND GND open open 16-bit 5 vdc
++ *
++ * GND GND GND open 16-bit 3.3 vdc
++ *
++ * GND GND open GND 16-bit x.x vdc
++ *
++ * GND GND GND GND 16-bit 3.3 & x.x vdc
++ *
++ *====================================================================
++ *
++ * CVS1 GND CCD1# open CardBus 3.3 vdc
++ *
++ * GND CVS2 open CCD2# CardBus x.x vdc
++ *
++ * GND CVS1 CCD2# open CardBus y.y vdc
++ *
++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc
++ *
++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc
++ *
++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc
++ *
++ */
++static int cardtype_vcc_detect(void)
++{
++ uint32 data32;
++ int cardtype;
++
++ cardtype = MPI_CARDTYPE_NONE;
++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
++ // the CVS pins to 0.
++ data32 = mpi->pcmcia_cntl1;
++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in.
++ {
++ case 0x00000003: // No Card is in the slot.
++ printk("mpi: No Card is in the PCMCIA slot\n");
++ break;
++
++ case 0x00000002: // Partial insertion, No CD2#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
++ break;
++
++ case 0x00000001: // Partial insertion, No CD1#.
++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
++ break;
++
++ case 0x00000000:
++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
++ // float the CVS pins.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ // Read the Register.
++ switch (data32 & 0x0000000C) // See what is on the CVS pins.
++ {
++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++
++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else { // CCD2 is tied to CVS1.
++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ break;
++ }
++ break;
++
++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
++ // 2 valid voltage options.
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
++ printk("mpi: Unknown card plugged into slot\n");
++ } else {// CCD2 is tied to CVS2.
++ printk("mpi: Detected 3.3 and x.x Cardbus card\n");
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ }
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2.
++ // 5 valid voltage options.
++
++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
++ {
++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
++ // This is not a valid combination.
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
++ // CCD1 is tied to ground.
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1.
++ printk("mpi: Detected y.y vdc Cardbus card\n");
++ } else { // CCD2 is tied to CVS2.
++ printk("mpi: Detected x.x vdc Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
++ // CCD2 is tied to ground.
++
++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
++ mdelay(1);
++ data32 = mpi->pcmcia_cntl1;
++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
++ printk("mpi: Detected 3.3 vdc Cardbus card\n");
++ } else { // CCD1 is tied to CVS2.
++ printk("mpi: Detected x.x and y.y Cardbus card\n");
++ }
++ cardtype = MPI_CARDTYPE_CARDBUS;
++ break;
++
++ case 0x00000000: // CCD1 and CCD2 are tied to ground.
++ cardtype = MPI_CARDTYPE_PCMCIA;
++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
++ break;
++ }
++ break;
++
++ default:
++ printk("mpi: Unknown card plugged into slot\n");
++ break;
++
++ }
++ }
++ return cardtype;
++}
++
++/*
++ * mpi_DetectPcCard: Detect the plugged in PC-Card
++ * Return: < 0 => Unknown card detected
++ * 0 => No card detected
++ * 1 => 16-bit card detected
++ * 2 => 32-bit CardBus card detected
++ */
++static int mpi_DetectPcCard(void)
++{
++ int cardtype;
++
++ cardtype = cardtype_vcc_detect();
++ switch(cardtype) {
++ case MPI_CARDTYPE_PCMCIA:
++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
++ mpi_InitPcmciaSpace();
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ case MPI_CARDTYPE_CARDBUS:
++ // 8 => CardBus Enable
++ // 1 => PCI Slot Number
++ // C => Float VS1 & VS2
++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) |
++ CARDBUS_ENABLE |
++ (CARDBUS_SLOT << 8)|
++ VS2_OEN |
++ VS1_OEN;
++ /* access to this memory window will be to/from CardBus */
++ mpi->l2pmremap1 |= CARDBUS_MEM;
++
++ // Need to reset the Cardbus Card. There's no CardManager to do this,
++ // and we need to be ready for PCI configuration.
++ mpi_ResetPcCard(cardtype, FALSE);
++ // Hold card in reset for 10ms
++ mdelay(10);
++ mpi_ResetPcCard(cardtype, TRUE);
++ // Let card come out of reset
++ mdelay(100);
++ break;
++ default:
++ break;
++ }
++ return cardtype;
++}
++
++static int mpi_init(void)
++{
++ unsigned long data;
++ unsigned int chipid;
++ unsigned int chiprev;
++ unsigned int sdramsize;
++
++ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
++ chiprev = (PERF->RevID & 0xFF);
++ sdramsize = getMemorySize();
++ /*
++ * Init the pci interface
++ */
++ data = GPIO->GPIOMode; // GPIO mode register
++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
++ GPIO->GPIOMode = data; // PCI internal arbiter
++
++ /*
++ * In the BCM6348 CardBus support is defaulted to Slot 0
++ * because there is no external IDSEL for CardBus. To disable
++ * the CardBus and allow a standard PCI card in Slot 0
++ * set the cbus_idsel field to 0x1f.
++ */
++ /*
++ uData = mpi->pcmcia_cntl1;
++ uData |= CARDBUS_IDSEL;
++ mpi->pcmcia_cntl1 = uData;
++ */
++ // Setup PCI I/O Window range. Give 64K to PCI I/O
++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
++ // UBUS to PCI I/O base address
++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI I/O Window remap
++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
++
++ // enable PCI related GPIO pins and data swap between system and PCI bus
++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
++
++ /* Enable 6348 BusMaster and Memory access mode */
++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
++
++ /* Configure two 16 MByte PCI to System memory regions. */
++ /* These memory regions are used when PCI device is a bus master */
++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
++ mpi->sp0remap = 0x0;
++
++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
++ mpi->sp1remap = 0x0;
++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
++
++ if ((chipid == 0x6348) && (chiprev == 0xb0)) {
++ mpi->sp0range = ~(sdramsize-1);
++ mpi->sp1range = ~(sdramsize-1);
++ }
++ /*
++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in
++ * first read.
++ */
++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
++ data |= 0x00000080;
++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
++
++ /* enable pci interrupt */
++ mpi->locintstat |= (EXT_PCI_INT << 16);
++
++ mpi_DetectPcCard();
++
++ ioport_resource.start = BCM_PCI_IO_BASE;
++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
++
++#if defined(CONFIG_USB)
++ PERF->blkEnables |= USBH_CLK_EN;
++ mdelay(100);
++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
++#endif
++
++ return 0;
++}
++#endif
++
++static int __init brcm63xx_setup(void)
++{
++ extern int panic_timeout;
++
++ _machine_restart = brcm_machine_restart;
++ _machine_halt = brcm_machine_halt;
++ pm_power_off = brcm_machine_halt;
++
++ board_time_init = brcm_time_init;
++ board_timer_setup = brcm_timer_setup;
++
++ panic_timeout = 5;
++
++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
++ /* mpi initialization */
++ mpi_init();
++#endif
++ return 0;
++}
++
++void plat_setup(void)
++{
++ brcm63xx_setup();
++}
++
++/***************************************************************************
++ * C++ New and delete operator functions
++ ***************************************************************************/
++
++/* void *operator new(unsigned int sz) */
++void *_Znwj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* void *operator new[](unsigned int sz)*/
++void *_Znaj(unsigned int sz)
++{
++ return( kmalloc(sz, GFP_KERNEL) );
++}
++
++/* placement new operator */
++/* void *operator new (unsigned int size, void *ptr) */
++void *ZnwjPv(unsigned int size, void *ptr)
++{
++ return ptr;
++}
++
++/* void operator delete(void *m) */
++void _ZdlPv(void *m)
++{
++ kfree(m);
++}
++
++/* void operator delete[](void *m) */
++void _ZdaPv(void *m)
++{
++ kfree(m);
++}
++
++EXPORT_SYMBOL(_Znwj);
++EXPORT_SYMBOL(_Znaj);
++EXPORT_SYMBOL(ZnwjPv);
++EXPORT_SYMBOL(_ZdlPv);
++EXPORT_SYMBOL(_ZdaPv);
++
+diff -urN linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
+--- linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,2 @@
++#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
++
+diff -urN linux.old/arch/mips/bcm963xx/time.c linux.dev/arch/mips/bcm963xx/time.c
+--- linux.old/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/bcm963xx/time.c 2006-08-25 03:58:22.000000000 +0200
+@@ -0,0 +1,114 @@
++/*
++<:copyright-gpl
++ Copyright 2004 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++/*
++ * Setup time for Broadcom 963xx MIPS boards
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel_stat.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/timex.h>
++
++#include <asm/mipsregs.h>
++#include <asm/ptrace.h>
++#include <asm/div64.h>
++#include <asm/time.h>
++
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static unsigned long r4k_offset; /* Amount to increment compare reg each time */
++static unsigned long r4k_cur; /* What counter should be at next timer irq */
++
++/* *********************************************************************
++ * calculateCpuSpeed()
++ * Calculate the BCM6348 CPU speed by reading the PLL strap register
++ * and applying the following formula:
++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
++ * Input parameters:
++ * none
++ * Return value:
++ * none
++ ********************************************************************* */
++
++static inline unsigned long __init calculateCpuSpeed(void)
++{
++ UINT32 pllStrap = PERF->PllStrap;
++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
++
++ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
++}
++
++
++static inline unsigned long __init cal_r4koff(void)
++{
++ mips_hpt_frequency = calculateCpuSpeed() / 2;
++ return (mips_hpt_frequency / HZ);
++}
++
++
++/*
++ * There are a lot of conceptually broken versions of the MIPS timer interrupt
++ * handler floating around. This one is rather different, but the algorithm
++ * is provably more robust.
++ */
++irqreturn_t brcm_timer_interrupt(struct pt_regs *regs)
++{
++ int irq = MIPS_TIMER_INT;
++
++ irq_enter();
++ kstat_this_cpu.irqs[irq]++;
++
++ timer_interrupt(irq, NULL, regs);
++ irq_exit();
++ return IRQ_HANDLED;
++}
++
++
++void __init brcm_time_init(void)
++{
++ unsigned int est_freq, flags;
++ local_irq_save(flags);
++
++ printk("calculating r4koff... ");
++ r4k_offset = cal_r4koff();
++ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset);
++
++ est_freq = 2 * r4k_offset * HZ;
++ est_freq += 5000; /* round */
++ est_freq -= est_freq % 10000;
++ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000,
++ (est_freq % 1000000) * 100 / 1000000);
++ local_irq_restore(flags);
++}
++
++
++void __init brcm_timer_setup(struct irqaction *irq)
++{
++ r4k_cur = (read_c0_count() + r4k_offset);
++ write_c0_compare(r4k_cur);
++ set_c0_status(IE_IRQ5);
++}
+diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
+--- linux.old/arch/mips/Kconfig 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/Kconfig 2006-08-25 01:57:46.000000000 +0200
+@@ -12,6 +12,15 @@
+ prompt "System type"
+ default SGI_IP22
+
++config MIPS_BRCM
++ bool "Support for the Broadcom boards"
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_CPU_MIPS32_R1
++ select IRQ_CPU
++ help
++ This is a fmaily of boards based on the Broadcom MIPS32
++
+ config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+@@ -780,6 +789,7 @@
+
+ endchoice
+
++source "arch/mips/bcm963xx/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
+--- linux.old/arch/mips/kernel/cpu-probe.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-08-25 00:39:38.000000000 +0200
+@@ -568,6 +568,25 @@
+ return;
+ }
+
++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
++{
++ decode_configs(c);
++ switch (c->processor_id & 0xff00) {
++ case PRID_IMP_BCM6338:
++ c->cputype = CPU_BCM6338;
++ break;
++ case PRID_IMP_BCM6345:
++ c->cputype = CPU_BCM6345;
++ break;
++ case PRID_IMP_BCM6348:
++ c->cputype = CPU_BCM6348;
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ break;
++ }
++}
++
+ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+ {
+ decode_configs(c);
+@@ -704,6 +723,9 @@
+ case PRID_COMP_LEGACY:
+ cpu_probe_legacy(c);
+ break;
++ case PRID_COMP_BROADCOM:
++ cpu_probe_broadcom(c);
++ break;
+ case PRID_COMP_MIPS:
+ cpu_probe_mips(c);
+ break;
+diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
+--- linux.old/arch/mips/kernel/proc.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/kernel/proc.c 2006-08-25 00:39:38.000000000 +0200
+@@ -85,6 +85,9 @@
+ [CPU_VR4181A] = "NEC VR4181A",
+ [CPU_SR71000] = "Sandcraft SR71000",
+ [CPU_PR4450] = "Philips PR4450",
++ [CPU_BCM6338] = "BCM6338",
++ [CPU_BCM6345] = "BCM6345",
++ [CPU_BCM6348] = "BCM6348",
+ };
+
+
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/Makefile 2006-08-25 11:36:41.000000000 +0200
+@@ -145,6 +145,19 @@
+ #
+
+ #
++# Broadcom board
++#
++core-$(CONFIG_MIPS_BRCM) += arch/mips/bcm963xx/
++core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/
++#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/
++#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/
++#cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx
++cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/bcm963xx/include
++cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx
++load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000
++
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
+diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c
+--- linux.old/arch/mips/mm/c-r4k.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/mm/c-r4k.c 2006-08-25 00:39:38.000000000 +0200
+@@ -914,6 +914,13 @@
+ if (!(config & MIPS_CONF_M))
+ panic("Don't know how to probe P-caches on this cpu.");
+
++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
++ {
++ printk("brcm mips: enabling icache and dcache...\n");
++ /* Enable caches */
++ write_c0_diag(read_c0_diag() | 0xC0000000);
++ }
++
+ /*
+ * So we seem to be a MIPS32 or MIPS64 CPU
+ * So let's probe the I-cache ...
+diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
+--- linux.old/arch/mips/mm/tlbex.c 2006-08-25 00:43:39.000000000 +0200
++++ linux.dev/arch/mips/mm/tlbex.c 2006-08-25 00:39:38.000000000 +0200
+@@ -882,6 +882,9 @@
+ case CPU_4KSC:
+ case CPU_20KC:
+ case CPU_25KF:
++ case CPU_BCM6338:
++ case CPU_BCM6345:
++ case CPU_BCM6348:
+ tlbw(p);
+ break;
+
+diff -urN linux.old/arch/mips/pci/fixup-bcm96348.c linux.dev/arch/mips/pci/fixup-bcm96348.c
+--- linux.old/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/pci/fixup-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,85 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++
++#include <bcmpci.h>
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static char irq_tab_bcm96348[] __initdata = {
++ [0] = INTERRUPT_ID_MPI,
++ [1] = INTERRUPT_ID_MPI,
++#if defined(CONFIG_USB)
++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH
++#endif
++};
++
++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return irq_tab_bcm96348[slot];
++}
++
++static void bcm96348_fixup(struct pci_dev *dev)
++{
++ uint32 memaddr;
++ uint32 size;
++
++ memaddr = pci_resource_start(dev, 0);
++ size = pci_resource_len(dev, 0);
++
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0:
++ // UBUS to PCI address range
++ // Memory Window 1. Mask determines which bits are decoded.
++ mpi->l2pmrange1 = ~(size-1);
++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
++ // register.
++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address. Replaces the masked address bits in the
++ // range register with this setting.
++ // Also, enable direct I/O and direct Memory accesses
++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++ case 1:
++ // Memory Window 2
++ mpi->l2pmrange2 = ~(size-1);
++ // UBUS to PCI Memory base address.
++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
++ // UBUS to PCI Remap Address
++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
++ break;
++
++#if defined(CONFIG_USB)
++ case USB_HOST_SLOT:
++ dev->resource[0].start = USB_HOST_BASE;
++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
++ break;
++#endif
++ }
++}
++
++struct pci_fixup pcibios_fixups[] = {
++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
++ {0}
++};
+diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile
+--- linux.old/arch/mips/pci/Makefile 2006-08-25 00:43:29.000000000 +0200
++++ linux.dev/arch/mips/pci/Makefile 2006-08-25 00:39:38.000000000 +0200
+@@ -18,6 +18,7 @@
+ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
+ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
+ obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff -urN linux.old/arch/mips/pci/ops-bcm96348.c linux.dev/arch/mips/pci/ops-bcm96348.c
+--- linux.old/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/pci/ops-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,276 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/addrspace.h>
++
++#include <bcm_intr.h>
++#include <bcm_map_part.h>
++#include <bcmpci.h>
++
++#include <linux/delay.h>
++
++#if defined(CONFIG_USB)
++#if 0
++#define DPRINT(x...) printk(x)
++#else
++#define DPRINT(x...)
++#endif
++
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
++
++static bool usb_mem_size_rd = FALSE;
++static uint32 usb_mem_base = 0;
++static uint32 usb_cfg_space_cmd_reg = 0;
++#endif
++static bool pci_mem_size_rd = FALSE;
++
++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
++
++static void mpi_SetupPciConfigAccess(uint32 addr)
++{
++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
++}
++
++static void mpi_ClearPciConfigAccess(void)
++{
++ mpi->l2pcfgctl = 0x00000000;
++}
++
++#if defined(CONFIG_USB)
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_write
++Abstract: PCI Config write on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
++{
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ switch (size) {
++ case 1:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_COMMAND:
++ usb_cfg_space_cmd_reg = *value;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 4:
++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ switch (where) {
++ case PCI_BASE_ADDRESS_0:
++ if (*value == 0xffffffff) {
++ usb_mem_size_rd = TRUE;
++ } else {
++ usb_mem_base = *value;
++ }
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++/* --------------------------------------------------------------------------
++ Name: pci63xx_int_read
++Abstract: PCI Config read on internal device(s)
++ -------------------------------------------------------------------------- */
++static int
++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
++{
++ uint32 retValue = 0xFFFFFFFF;
++
++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
++ return PCIBIOS_SUCCESSFUL;
++ }
++
++ // For now, this is specific to the USB Host controller. We can
++ // make it more general if we have to...
++ // Emulate PCI Config accesses
++ switch (where) {
++ case PCI_VENDOR_ID:
++ case PCI_DEVICE_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
++ break;
++ case PCI_COMMAND:
++ case PCI_STATUS:
++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
++ break;
++ case PCI_CLASS_REVISION:
++ case PCI_CLASS_DEVICE:
++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
++ break;
++ case PCI_BASE_ADDRESS_0:
++ if (usb_mem_size_rd) {
++ retValue = USB_BAR0_MEM_SIZE;
++ } else {
++ if (usb_mem_base != 0)
++ retValue = usb_mem_base;
++ else
++ retValue = USB_HOST_BASE;
++ }
++ usb_mem_size_rd = FALSE;
++ break;
++ case PCI_CACHE_LINE_SIZE:
++ case PCI_LATENCY_TIMER:
++ retValue = 0;
++ break;
++ case PCI_HEADER_TYPE:
++ retValue = PCI_HEADER_TYPE_NORMAL;
++ break;
++ case PCI_SUBSYSTEM_VENDOR_ID:
++ retValue = PCI_VENDOR_ID_BROADCOM;
++ break;
++ case PCI_SUBSYSTEM_ID:
++ retValue = 0x6300;
++ break;
++ case PCI_INTERRUPT_LINE:
++ retValue = INTERRUPT_ID_USBH;
++ break;
++ default:
++ break;
++ }
++
++ switch (size) {
++ case 1:
++ *value = (retValue >> ((where & 3) << 3)) & 0xff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 2:
++ *value = (retValue >> ((where & 3) << 3)) & 0xffff;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ case 4:
++ *value = retValue;
++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n",
++ PCI_SLOT(devfn), where, size, *value);
++ break;
++ default:
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++#endif
++
++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 * val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_read(devfn, where, val, size);
++#endif
++
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (pci_mem_size_rd) {
++ /* bcm6348 PCI memory window minimum size is 64K */
++ *val &= PCI_SIZE_64K;
++ }
++ }
++ break;
++ default:
++ break;
++ }
++ pci_mem_size_rd = FALSE;
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
++ uint32 data;
++
++#if defined(CONFIG_USB)
++ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
++ return pci63xx_int_write(devfn, where, &val, size);
++#endif
++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
++ data = *(uint32 *)ioBase;
++ switch(size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ /* Special case for reading PCI device range */
++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
++ if (val == 0xffffffff)
++ pci_mem_size_rd = TRUE;
++ }
++ break;
++ default:
++ break;
++ }
++ *(uint32 *)ioBase = data;
++ udelay(500);
++ mpi_ClearPciConfigAccess();
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops bcm96348_pci_ops = {
++ .read = bcm96348_pcibios_read,
++ .write = bcm96348_pcibios_write
++};
+diff -urN linux.old/arch/mips/pci/pci-bcm96348.c linux.dev/arch/mips/pci/pci-bcm96348.c
+--- linux.old/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/pci/pci-bcm96348.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++
++#include <asm/pci_channel.h>
++#include <bcmpci.h>
++
++static struct resource bcm_pci_io_resource = {
++ .name = "bcm96348 pci IO space",
++ .start = BCM_PCI_IO_BASE,
++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
++ .flags = IORESOURCE_IO
++};
++
++static struct resource bcm_pci_mem_resource = {
++ .name = "bcm96348 pci memory space",
++ .start = BCM_PCI_MEM_BASE,
++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
++ .flags = IORESOURCE_MEM
++};
++
++extern struct pci_ops bcm96348_pci_ops;
++
++struct pci_controller bcm96348_controller = {
++ .pci_ops = &bcm96348_pci_ops,
++ .io_resource = &bcm_pci_io_resource,
++ .mem_resource = &bcm_pci_mem_resource,
++};
++
++static void bcm96348_pci_init(void)
++{
++ register_pci_controller(&bcm96348_controller);
++}
++
++arch_initcall(bcm96348_pci_init);
+diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c
+--- linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,1056 @@
++/*
++<:copyright-gpl
++ Copyright 2002 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++:>
++*/
++
++/* Description: Serial port driver for the BCM963XX. */
++
++#define CARDNAME "bcm963xx_serial driver"
++#define VERSION "2.0"
++#define VER_STR CARDNAME " v" VERSION "\n"
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++
++/* for definition of struct console */
++#include <linux/console.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/serial.h>
++#include <asm/uaccess.h>
++
++#include <bcmtypes.h>
++#include <board.h>
++#include <bcm_map_part.h>
++#include <bcm_intr.h>
++
++static DEFINE_SPINLOCK(bcm963xx_serial_lock);
++
++extern void _putc(char);
++extern void _puts(const char *);
++
++typedef struct bcm_serial {
++ volatile Uart * port;
++ int type;
++ int flags;
++ int irq;
++ int baud_base;
++ int blocked_open;
++ unsigned short close_delay;
++ unsigned short closing_wait;
++ unsigned short line; /* port/line number */
++ unsigned short cflags; /* line configuration flag */
++ unsigned short x_char; /* xon/xoff character */
++ unsigned short read_status_mask; /* mask for read condition */
++ unsigned short ignore_status_mask; /* mask for ignore condition */
++ unsigned long event; /* mask used in BH */
++ int xmit_head; /* Position of the head */
++ int xmit_tail; /* Position of the tail */
++ int xmit_cnt; /* Count of the chars in the buffer */
++ int count; /* indicates how many times it has been opened */
++ int magic;
++
++ struct async_icount icount; /* keep track of things ... */
++ struct tty_struct *tty; /* tty associated */
++ struct termios normal_termios;
++
++ wait_queue_head_t open_wait;
++ wait_queue_head_t close_wait;
++
++ long session; /* Session of opening process */
++ long pgrp; /* pgrp of opening process */
++
++ unsigned char is_initialized;
++} Context;
++
++
++/*---------------------------------------------------------------------*/
++/* Define bits in the Interrupt Enable register */
++/*---------------------------------------------------------------------*/
++/* Enable receive interrupt */
++#define RXINT (RXFIFONE|RXOVFERR)
++
++/* Enable transmit interrupt */
++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
++
++/* Enable receiver line status interrupt */
++#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
++
++#define BCM_NUM_UARTS 1
++
++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
++
++
++static struct bcm_serial multi[BCM_NUM_UARTS];
++static struct bcm_serial *lines[BCM_NUM_UARTS];
++static struct tty_driver serial_driver;
++static struct tty_struct *serial_table[BCM_NUM_UARTS];
++static struct termios *serial_termios[BCM_NUM_UARTS];
++static struct termios *serial_termios_locked[BCM_NUM_UARTS];
++static int serial_refcount;
++
++
++static void bcm_stop (struct tty_struct *tty);
++static void bcm_start (struct tty_struct *tty);
++static inline void receive_chars (struct bcm_serial * info);
++static int startup (struct bcm_serial *info);
++static void shutdown (struct bcm_serial * info);
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count);
++static int bcm63xx_cons_write_room (struct tty_struct *tty);
++static int bcm_chars_in_buffer (struct tty_struct *tty);
++static void bcm_flush_buffer (struct tty_struct *tty);
++static void bcm_throttle (struct tty_struct *tty);
++static void bcm_unthrottle (struct tty_struct *tty);
++static void bcm_send_xchar (struct tty_struct *tty, char ch);
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
++static void send_break (struct bcm_serial *info, int duration);
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg);
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
++static void bcm_hangup (struct tty_struct *tty);
++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
++static int __init bcm63xx_serialinit(void);
++
++
++/*
++ * ------------------------------------------------------------
++ * rs_stop () and rs_start ()
++ *
++ * These routines are called before setting or resetting
++ * tty->stopped. They enable or disable transmitter interrupts,
++ * as necessary.
++ * ------------------------------------------------------------
++ */
++static void bcm_stop (struct tty_struct *tty)
++{
++}
++
++static void bcm_start (struct tty_struct *tty)
++{
++ _puts(CARDNAME " Start\n");
++}
++
++/*
++ * ------------------------------------------------------------
++ * receive_char ()
++ *
++ * This routine deals with inputs from any lines.
++ * ------------------------------------------------------------
++ */
++static inline void receive_chars (struct bcm_serial * info)
++{
++ struct tty_struct *tty = 0;
++ struct async_icount * icount;
++ int ignore = 0;
++ unsigned short status, tmp;
++ UCHAR ch = 0;
++ while ((status = info->port->intStatus) & RXINT)
++ {
++ char flag_char = 0;
++
++ if (status & RXFIFONE)
++ ch = info->port->Data; // Read the character
++ tty = info->tty; /* now tty points to the proper dev */
++ icount = &info->icount;
++ if (! tty)
++ break;
++ if (!tty_buffer_request_room(tty, 1))
++ break;
++ icount->rx++;
++ if (status & RXBRK)
++ {
++ flag_char = TTY_BREAK;
++ icount->brk++;
++ }
++ // keep track of the statistics
++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
++ {
++ if (status & RXPARERR) /* parity error */
++ icount->parity++;
++ else
++ if (status & RXFRAMERR) /* frame error */
++ icount->frame++;
++ if (status & RXOVFERR)
++ {
++ // Overflow. Reset the RX FIFO
++ info->port->fifoctl |= RSTRXFIFOS;
++ icount->overrun++;
++ }
++ // check to see if we should ignore the character
++ // and mask off conditions that should be ignored
++ if (status & info->ignore_status_mask)
++ {
++ if (++ignore > 100 )
++ break;
++ goto ignore_char;
++ }
++ // Mask off the error conditions we want to ignore
++ tmp = status & info->read_status_mask;
++ if (tmp & RXPARERR)
++ {
++ flag_char = TTY_PARITY;
++ }
++ else
++ if (tmp & RXFRAMERR)
++ {
++ flag_char = TTY_FRAME;
++ }
++ if (tmp & RXOVFERR)
++ {
++ tty_insert_flip_char(tty, ch, flag_char);
++ ch = 0;
++ flag_char = TTY_OVERRUN;
++ if (!tty_buffer_request_room(tty, 1))
++ break;
++ }
++ }
++ tty_insert_flip_char(tty, ch, flag_char);
++ }
++ignore_char:
++ if (tty)
++ tty_flip_buffer_push(tty);
++}
++
++
++/*
++ * ------------------------------------------------------------
++ * bcm_interrupt ()
++ *
++ * this is the main interrupt routine for the chip.
++ * It deals with the multiple ports.
++ * ------------------------------------------------------------
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#else
++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
++#endif
++{
++ struct bcm_serial * info = lines[0];
++ UINT16 intStat;
++
++ /* get pending interrupt flags from UART */
++
++ /* Mask with only the serial interrupts that are enabled */
++ intStat = info->port->intStatus & info->port->intMask;
++ while (intStat)
++ {
++ if (intStat & RXINT)
++ receive_chars (info);
++ else
++ if (intStat & TXINT)
++ info->port->intStatus = TXINT;
++ else /* don't know what it was, so let's mask it */
++ info->port->intMask &= ~intStat;
++
++ intStat = info->port->intStatus & info->port->intMask;
++ }
++
++ // Clear the interrupt
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ return IRQ_HANDLED;
++#endif
++}
++
++/*
++ * -------------------------------------------------------------------
++ * startup ()
++ *
++ * various initialization tasks
++ * -------------------------------------------------------------------
++ */
++static int startup (struct bcm_serial *info)
++{
++ // Port is already started...
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * shutdown ()
++ *
++ * This routine will shutdown a serial port; interrupts are disabled, and
++ * DTR is dropped if the hangup on close termio flag is on.
++ * -------------------------------------------------------------------
++ */
++static void shutdown (struct bcm_serial * info)
++{
++ unsigned long flags;
++ if (!info->is_initialized)
++ return;
++
++
++ /*save_flags (flags);
++ cli ();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ info->port->control &= ~(BRGEN|TXEN|RXEN);
++ if (info->tty)
++ set_bit (TTY_IO_ERROR, &info->tty->flags);
++ info->is_initialized = 0;
++
++ //restore_flags (flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++}
++/*
++ * -------------------------------------------------------------------
++ * change_speed ()
++ *
++ * Set the baud rate, character size, parity and stop bits.
++ * -------------------------------------------------------------------
++ */
++static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
++{
++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
++ /*save_flags(ulFlags);
++ cli();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
++
++ switch( cFlag & (CBAUD | CBAUDEX) )
++ {
++ case B115200:
++ ulBaud = 115200;
++ break;
++ case B57600:
++ ulBaud = 57600;
++ break;
++ case B38400:
++ ulBaud = 38400;
++ break;
++ case B19200:
++ ulBaud = 19200;
++ break;
++ case B9600:
++ ulBaud = 9600;
++ break;
++ case B4800:
++ ulBaud = 4800;
++ break;
++ case B2400:
++ ulBaud = 2400;
++ break;
++ case B1800:
++ ulBaud = 1800;
++ break;
++ case B1200:
++ ulBaud = 1200;
++ break;
++ case B600:
++ ulBaud = 600;
++ break;
++ case B300:
++ ulBaud = 300;
++ break;
++ case B200:
++ ulBaud = 200;
++ break;
++ case B150:
++ ulBaud = 150;
++ break;
++ case B134:
++ ulBaud = 134;
++ break;
++ case B110:
++ ulBaud = 110;
++ break;
++ case B75:
++ ulBaud = 75;
++ break;
++ case B50:
++ ulBaud = 50;
++ break;
++ default:
++ ulBaud = 115200;
++ break;
++ }
++
++ /* Calculate buad rate. */
++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
++ ulTmp = (ulClockFreqHz / ulBaud) / 16;
++ if( ulTmp & 0x01 )
++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
++ else
++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
++ pUart->baudword = ulTmp;
++
++ /* Set character size, stop bits and parity. */
++ switch( cFlag & CSIZE )
++ {
++ case CS5:
++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
++ break;
++ case CS6:
++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
++ break;
++ case CS7:
++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
++ break;
++ /*case CS8:*/
++ default:
++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
++ break;
++ }
++ if( cFlag & CSTOPB )
++ ulTmp |= TWOSTOP; /* select 2 stop bits */
++ else
++ ulTmp |= ONESTOP; /* select one stop bit */
++
++ /* Write these values into the config reg. */
++ pUart->config = ulTmp;
++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
++ switch( cFlag & (PARENB | PARODD) )
++ {
++ case PARENB|PARODD:
++ pUart->control |= RXPARITYEN | TXPARITYEN;
++ break;
++ case PARENB:
++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
++ break;
++ default:
++ pUart->control |= 0;
++ break;
++ }
++
++ /* Reset and flush uart */
++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
++ //restore_flags( ulFlags );
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_char ()
++ *
++ * Nothing to flush. Polled I/O is used.
++ * -------------------------------------------------------------------
++ */
++static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
++{
++}
++
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write ()
++ *
++ * Main output routine using polled I/O.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
++ const unsigned char *buf, int count)
++{
++ int c;
++
++ for (c = 0; c < count; c++)
++ _putc(buf[c]);
++ return count;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm63xx_cons_write_room ()
++ *
++ * Compute the amount of space available for writing.
++ * -------------------------------------------------------------------
++ */
++static int bcm63xx_cons_write_room (struct tty_struct *tty)
++{
++ /* Pick a number. Any number. Polled I/O is used. */
++ return 1024;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_chars_in_buffer ()
++ *
++ * compute the amount of char left to be transmitted
++ * -------------------------------------------------------------------
++ */
++static int bcm_chars_in_buffer (struct tty_struct *tty)
++{
++ return 0;
++}
++
++/*
++ * -------------------------------------------------------------------
++ * bcm_flush_buffer ()
++ *
++ * Empty the output buffer
++ * -------------------------------------------------------------------
++ */
++static void bcm_flush_buffer (struct tty_struct *tty)
++{
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm_throttle () and bcm_unthrottle ()
++ *
++ * This routine is called by the upper-layer tty layer to signal that
++ * incoming characters should be throttled (or not).
++ * ------------------------------------------------------------
++ */
++static void bcm_throttle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ info->x_char = STOP_CHAR(tty);
++}
++
++static void bcm_unthrottle (struct tty_struct *tty)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ if (I_IXOFF(tty))
++ {
++ if (info->x_char)
++ info->x_char = 0;
++ else
++ info->x_char = START_CHAR(tty);
++ }
++}
++
++static void bcm_send_xchar (struct tty_struct *tty, char ch)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++ info->x_char = ch;
++ if (ch)
++ bcm_start (info->tty);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_ioctl () and friends
++ * ------------------------------------------------------------
++ */
++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
++{
++ struct serial_struct tmp;
++
++ if (!retinfo)
++ return -EFAULT;
++
++ memset (&tmp, 0, sizeof(tmp));
++ tmp.type = info->type;
++ tmp.line = info->line;
++ tmp.port = (int) info->port;
++ tmp.irq = info->irq;
++ tmp.flags = 0;
++ tmp.baud_base = info->baud_base;
++ tmp.close_delay = info->close_delay;
++ tmp.closing_wait = info->closing_wait;
++
++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
++}
++
++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
++{
++ struct serial_struct new_serial;
++ struct bcm_serial old_info;
++ int retval = 0;
++
++ if (!new_info)
++ return -EFAULT;
++
++ copy_from_user (&new_serial, new_info, sizeof(new_serial));
++ old_info = *info;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++
++ if (info->count > 1)
++ return -EBUSY;
++
++ /* OK, past this point, all the error checking has been done.
++ * At this point, we start making changes.....
++ */
++ info->baud_base = new_serial.baud_base;
++ info->type = new_serial.type;
++ info->close_delay = new_serial.close_delay;
++ info->closing_wait = new_serial.closing_wait;
++ retval = startup (info);
++ return retval;
++}
++
++/*
++ * get_lsr_info - get line status register info
++ *
++ * Purpose: Let user call ioctl() to get info when the UART physically
++ * is emptied. On bus types like RS485, the transmitter must
++ * release the bus after transmitting. This must be done when
++ * the transmit shift register is empty, not be done when the
++ * transmit holding register is empty. This functionality
++ * allows an RS485 driver to be written in user space.
++ */
++static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
++{
++ return( 0 );
++}
++
++/*
++ * This routine sends a break character out the serial port.
++ */
++static void send_break (struct bcm_serial *info, int duration)
++{
++ unsigned long flags;
++
++ if (!info->port)
++ return;
++
++ current->state = TASK_INTERRUPTIBLE;
++
++ /*save_flags (flags);
++ cli();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ info->port->control |= XMITBREAK;
++ schedule_timeout(duration);
++ info->port->control &= ~XMITBREAK;
++
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ //restore_flags (flags);
++}
++
++static int bcm_ioctl (struct tty_struct * tty, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ int error;
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ int retval;
++
++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
++ {
++ if (tty->flags & (1 << TTY_IO_ERROR))
++ return -EIO;
++ }
++ switch (cmd)
++ {
++
++ case TCSBRK: /* SVID version: non-zero arg --> no break */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ if (!arg)
++ send_break (info, HZ/4); /* 1/4 second */
++ return 0;
++
++ case TCSBRKP: /* support for POSIX tcsendbreak() */
++ retval = tty_check_change (tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent (tty, 0);
++ send_break (info, arg ? arg*(HZ/10) : HZ/4);
++ return 0;
++
++ case TIOCGSOFTCAR:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
++ if (!error)
++ return -EFAULT;
++ else
++ {
++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
++ return 0;
++ }
++
++ case TIOCSSOFTCAR:
++ error = get_user (arg, (unsigned long *)arg);
++ if (error)
++ return error;
++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
++ return 0;
++
++ case TIOCGSERIAL:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
++ if (!error)
++ return -EFAULT;
++ else
++ return get_serial_info (info, (struct serial_struct *)arg);
++
++ case TIOCSSERIAL:
++ return set_serial_info (info, (struct serial_struct *) arg);
++
++ case TIOCSERGETLSR: /* Get line status register */
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
++ if (!error)
++ return -EFAULT;
++ else
++ return get_lsr_info (info, (unsigned int *)arg);
++
++ case TIOCSERGSTRUCT:
++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
++ if (!error)
++ return -EFAULT;
++ else
++ {
++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
++ return 0;
++ }
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
++{
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ if( tty->termios->c_cflag != old_termios->c_cflag )
++ change_speed (info->port, tty->termios->c_cflag);
++}
++
++/*
++ * ------------------------------------------------------------
++ * bcm63xx_cons_close()
++ *
++ * This routine is called when the serial port gets closed. First, we
++ * wait for the last remaining data to be sent. Then, we turn off
++ * the transmit enable and receive enable flags.
++ * ------------------------------------------------------------
++ */
++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
++{
++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
++ unsigned long flags;
++
++ if (!info)
++ return;
++
++ /*save_flags (flags);
++ cli();*/
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ if (tty_hung_up_p (filp))
++ {
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ //restore_flags (flags);
++ return;
++ }
++
++ if ((tty->count == 1) && (info->count != 1))
++ {
++
++ /* Uh, oh. tty->count is 1, which means that the tty
++ * structure will be freed. Info->count should always
++ * be one in these conditions. If it's greater than
++ * one, we've got real problems, since it means the
++ * serial port won't be shutdown.
++ */
++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
++ "info->count is %d\n", info->count);
++ info->count = 1;
++ }
++
++ if (--info->count < 0)
++ {
++ printk("ds_close: bad serial port count for ttys%d: %d\n",
++ info->line, info->count);
++ info->count = 0;
++ }
++
++ if (info->count)
++ {
++ //restore_flags (flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ return;
++ }
++
++ /* Now we wait for the transmit buffer to clear; and we notify
++ * the line discipline to only process XON/XOFF characters.
++ */
++ tty->closing = 1;
++
++ /* At this point we stop accepting input. To do this, we
++ * disable the receive line status interrupts.
++ */
++ shutdown (info);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ if (tty->driver->flush_buffer)
++ tty->driver->flush_buffer (tty);
++#else
++ if (tty->driver.flush_buffer)
++ tty->driver.flush_buffer (tty);
++#endif
++ if (tty->ldisc.flush_buffer)
++ tty->ldisc.flush_buffer (tty);
++
++ tty->closing = 0;
++ info->event = 0;
++ info->tty = 0;
++ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
++ {
++ if (tty->ldisc.close)
++ (tty->ldisc.close)(tty);
++ tty->ldisc = *tty_ldisc_get(N_TTY);
++ tty->termios->c_line = N_TTY;
++ if (tty->ldisc.open)
++ (tty->ldisc.open)(tty);
++ }
++ if (info->blocked_open)
++ {
++ if (info->close_delay)
++ {
++ current->state = TASK_INTERRUPTIBLE;
++ schedule_timeout(info->close_delay);
++ }
++ wake_up_interruptible (&info->open_wait);
++ }
++ wake_up_interruptible (&info->close_wait);
++
++ //restore_flags (flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++}
++
++/*
++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
++ */
++static void bcm_hangup (struct tty_struct *tty)
++{
++
++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
++
++ shutdown (info);
++ info->event = 0;
++ info->count = 0;
++ info->tty = 0;
++ wake_up_interruptible (&info->open_wait);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_open() and friends
++ * ------------------------------------------------------------
++ */
++static int block_til_ready (struct tty_struct *tty, struct file *filp,
++ struct bcm_serial *info)
++{
++ return 0;
++}
++
++/*
++ * This routine is called whenever a serial port is opened. It
++ * enables interrupts for a serial port. It also performs the
++ * serial-specific initialization for the tty structure.
++ */
++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
++{
++ struct bcm_serial *info;
++ int retval, line;
++
++ // Make sure we're only opening on of the ports we support
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
++#else
++ line = MINOR(tty->device) - tty->driver.minor_start;
++#endif
++
++ if ((line < 0) || (line >= BCM_NUM_UARTS))
++ return -ENODEV;
++
++ info = lines[line];
++
++ info->port->intMask = 0; /* Clear any pending interrupts */
++ info->port->intMask = RXINT; /* Enable RX */
++
++ info->count++;
++ tty->driver_data = info;
++ info->tty = tty;
++ BcmHalInterruptEnable (INTERRUPT_ID_UART);
++
++ // Start up serial port
++ retval = startup (info);
++ if (retval)
++ return retval;
++
++ retval = block_til_ready (tty, filp, info);
++ if (retval)
++ return retval;
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ info->pgrp = process_group(current);
++ info->session = current->signal->session;
++#else
++ info->session = current->session;
++ info->pgrp = current->pgrp;
++#endif
++
++ return 0;
++}
++
++/* --------------------------------------------------------------------------
++ Name: bcm63xx_serialinit
++ Purpose: Initialize our BCM63xx serial driver
++-------------------------------------------------------------------------- */
++static int __init bcm63xx_serialinit(void)
++{
++ int i, flags;
++ struct bcm_serial * info;
++
++ // Print the driver version information
++ printk(VER_STR);
++
++ memset(&serial_driver, 0, sizeof(struct tty_driver));
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.owner = THIS_MODULE;
++ serial_driver.devfs_name = "tts/";
++#endif
++ serial_driver.magic = TTY_DRIVER_MAGIC;
++ serial_driver.name = "ttyS";
++ serial_driver.major = TTY_MAJOR;
++ serial_driver.minor_start = 64;
++ serial_driver.num = BCM_NUM_UARTS;
++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver.subtype = SERIAL_TYPE_NORMAL;
++ serial_driver.init_termios = tty_std_termios;
++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
++ serial_driver.flags = TTY_DRIVER_REAL_RAW;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ serial_driver.refcount = serial_refcount;
++ serial_driver.ttys = serial_table;
++#else
++ serial_driver.refcount = &serial_refcount;
++ serial_driver.table = serial_table;
++#endif
++
++ serial_driver.termios = serial_termios;
++ serial_driver.termios_locked = serial_termios_locked;
++ serial_driver.open = bcm63xx_cons_open;
++ serial_driver.close = bcm63xx_cons_close;
++ serial_driver.write = bcm63xx_cons_write;
++ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
++ serial_driver.write_room = bcm63xx_cons_write_room;
++ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
++ serial_driver.flush_buffer = bcm_flush_buffer;
++ serial_driver.ioctl = bcm_ioctl;
++ serial_driver.throttle = bcm_throttle;
++ serial_driver.unthrottle = bcm_unthrottle;
++ serial_driver.send_xchar = bcm_send_xchar;
++ serial_driver.set_termios = bcm_set_termios;
++ serial_driver.stop = bcm_stop;
++ serial_driver.start = bcm_start;
++ serial_driver.hangup = bcm_hangup;
++
++ if (tty_register_driver (&serial_driver))
++ panic("Couldn't register serial driver\n");
++
++ //save_flags(flags); cli();
++ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
++
++ for (i = 0; i < BCM_NUM_UARTS; i++)
++ {
++ info = &multi[i];
++ lines[i] = info;
++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
++ info->irq = (2 - i) + 8;
++ info->line = i;
++ info->tty = 0;
++ info->close_delay = 50;
++ info->closing_wait = 3000;
++ info->x_char = 0;
++ info->event = 0;
++ info->count = 0;
++ info->blocked_open = 0;
++ info->normal_termios = serial_driver.init_termios;
++ init_waitqueue_head(&info->open_wait);
++ init_waitqueue_head(&info->close_wait);
++
++ /* If we are pointing to address zero then punt - not correctly
++ * set up in setup.c to handle this.
++ */
++ if (! info->port)
++ return 0;
++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
++ }
++
++ /* order matters here... the trick is that flags
++ * is updated... in request_irq - to immediatedly obliterate
++ * it is unwise.
++ */
++ //restore_flags(flags);
++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
++ return 0;
++}
++
++module_init(bcm63xx_serialinit);
++
++/* --------------------------------------------------------------------------
++ Name: bcm_console_print
++ Purpose: bcm_console_print is registered for printk.
++ The console_lock must be held when we get here.
++-------------------------------------------------------------------------- */
++static void bcm_console_print (struct console * cons, const char * str,
++ unsigned int count)
++{
++ unsigned int i;
++ //_puts(str);
++ for(i=0; i<count; i++, str++)
++ {
++ _putc(*str);
++ if (*str == 10)
++ {
++ _putc(13);
++ }
++ }
++}
++
++static struct tty_driver * bcm_console_device(struct console * c, int *index)
++{
++ *index = c->index;
++ return &serial_driver;
++}
++
++static int __init bcm_console_setup(struct console * co, char * options)
++{
++ return 0;
++}
++
++static struct console bcm_sercons = {
++ .name = "ttyS",
++ .write = bcm_console_print,
++ .device = bcm_console_device,
++ .setup = bcm_console_setup,
++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
++ .index = -1,
++};
++
++static int __init bcm63xx_console_init(void)
++{
++ register_console(&bcm_sercons);
++ return 0;
++}
++
++console_initcall(bcm63xx_console_init);
+diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile
+--- linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,13 @@
++# File: bcmdrivers/opensource/char/serial
++#
++# Makefile for the BCM63xx serial/console driver
++
++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
++
++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
++
++-include $(TOPDIR)/Rules.make
++
++clean:
++ rm -f core *.o *.a *.s
++
+diff -urN linux.old/boardparms/bcm963xx/boardparms.c linux.dev/boardparms/bcm963xx/boardparms.c
+--- linux.old/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/boardparms/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,2392 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.c
++ *
++ * Description: This file contains the implementation for the BCM63xx board
++ * parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++/* Includes. */
++#include <linux/config.h>
++#include "boardparms.h"
++
++/* Defines. */
++
++/* Default psi size in K bytes */
++#define BP_PSI_DEFAULT_SIZE 24
++
++/* Typedefs */
++typedef struct boardparameters
++{
++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
++ unsigned short usSdramSize; /* SDRAM size and type */
++ unsigned short usPsiSize; /* persistent storage in K bytes */
++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
++ unsigned short usGpioUartRts; /* GPIO pin or not defined */
++ unsigned short usGpioUartCts; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
++ unsigned short usExtIntrWireless; /* ext intr or not defined */
++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
++ unsigned short usExtIntrHpna; /* ext intr or not defined */
++ unsigned short usCsHpna; /* chip select not defined */
++ unsigned short usAntInUseWireless; /* antenna in use or not defined */
++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
++} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
++
++/* Variables */
++#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
++static BOARD_PARAMETERS g_bcm96338sv =
++{
++ "96338SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static BOARD_PARAMETERS g_bcm96338l2m8m =
++{
++ "96338L-2M-8M", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
++#endif
++
++#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
++static BOARD_PARAMETERS g_bcm96345r =
++{
++ "96345R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw2 =
++{
++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
++ * Reset or RTS.
++ */
++ "96345GW2", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_GPIO_0_AH, /* usGpioPhySpiSck */
++ BP_GPIO_4_AH, /* usGpioPhySpiSs */
++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_GPIO, /* usConfigType */
++ BP_ENET_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_GPIO_13_AH, /* usGpioUartRts */
++ BP_GPIO_9_AH, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345gw =
++{
++ "96345GW", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_1, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_15_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_GPIO_2_AH, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_GPIO_10_AH, /* usGpioLedWireless */
++ BP_GPIO_7_AH, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_EXT_INTR_2, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_EXT_INTR_3, /* usExtIntrHpna */
++ BP_CS_1, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96335r =
++{
++ "96335R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_9_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_8_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_9_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345r0 =
++{
++ "96345R0", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_9_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96345rs =
++{
++ "96345RS", /* szBoardId */
++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_GPIO_8_AH, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_8_AH, /* usGpioLedWanData */
++ BP_GPIO_9_AH, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
++ BP_GPIO_8_AH, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
++ &g_bcm96345rs, 0};
++#endif
++
++#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
++
++static BOARD_PARAMETERS g_bcm96348r =
++{
++ "96348R", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY}}, /* ucPhyType */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348lv =
++{
++ "96348LV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x02, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_GPIO_5_AL, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw =
++{
++ "96348GW", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_10 =
++{
++ "96348GW-10", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_6_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348gw_11 =
++{
++ "96348GW-11", /* szBoardId */
++ {{BP_ENET_NO_PHY}, /* ucPhyType */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x04, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static BOARD_PARAMETERS g_bcm96348sv =
++{
++ "96348SV", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
++ 0x1f, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}}, /* usReverseMii */
++ {{BP_VOIP_NO_DSP}, /* ucDspType */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_NOT_DEFINED, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_NOT_DEFINED, /* usGpioLedWanData */
++ BP_NOT_DEFINED, /* usGpioLedPpp */
++ BP_NOT_DEFINED, /* usGpioLedPppFail */
++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
++ BP_NOT_DEFINED, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
++{
++ "96348GW-DualDSP", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x03, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_UNEQUIPPED, /* usGpioVoipReset */
++ BP_GPIO_34_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_DSP, /* ucDspType */
++ 0x01, /* ucDspAddress */
++ BP_EXT_INTR_3, /* usExtIntrVoip */
++ BP_UNEQUIPPED , /* usGpioVoipReset */
++ BP_GPIO_35_AH, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_3}}, /* usCsVoip */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++
++static BOARD_PARAMETERS g_bcmCustom_01 =
++{
++ "BCMCUST_01", /* szBoardId */
++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
++ 0x01, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_MDIO, /* usConfigType */
++ BP_NOT_DEFINED}, /* usReverseMii */
++ {BP_ENET_NO_PHY, /* ucPhyType */
++ 0x00, /* ucPhyAddress */
++ BP_NOT_DEFINED, /* usGpioPhySpiSck */
++ BP_NOT_DEFINED, /* usGpioPhySpiSs */
++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
++ BP_NOT_DEFINED, /* usGpioPhyReset */
++ 0x01, /* numSwitchPorts */
++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
++ BP_ENET_REVERSE_MII}}, /* usReverseMii */
++ {{BP_VOIP_DSP, /* ucDspType */
++ 0x00, /* ucDspAddress */
++ BP_EXT_INTR_2, /* usExtIntrVoip */
++ BP_GPIO_36_AH, /* usGpioVoipReset */
++ BP_GPIO_34_AL, /* usGpioVoipIntr */
++ BP_NOT_DEFINED, /* usGpioLedVoip */
++ BP_CS_2}, /* usCsVoip */
++ {BP_VOIP_NO_DSP}}, /* ucDspType */
++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
++ BP_NOT_DEFINED, /* usGpioPcmciaReset */
++ BP_NOT_DEFINED, /* usGpioUartRts */
++ BP_NOT_DEFINED, /* usGpioUartCts */
++ BP_NOT_DEFINED, /* usGpioLedAdsl */
++ BP_GPIO_2_AL, /* usGpioLedAdslFail */
++ BP_NOT_DEFINED, /* usGpioLedWireless */
++ BP_NOT_DEFINED, /* usGpioLedUsb */
++ BP_NOT_DEFINED, /* usGpioLedHpna */
++ BP_GPIO_3_AL, /* usGpioLedWanData */
++ BP_GPIO_3_AL, /* usGpioLedPpp */
++ BP_GPIO_4_AL, /* usGpioLedPppFail */
++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
++ BP_GPIO_1_AL, /* usGpioLedBlStop */
++ BP_NOT_DEFINED, /* usExtIntrWireless */
++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
++ BP_NOT_DEFINED, /* usExtIntrHpna */
++ BP_NOT_DEFINED, /* usCsHpna */
++ BP_NOT_DEFINED, /* usAntInUseWireless */
++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
++ BP_NOT_DEFINED /* usGpioLedSesWireless */
++};
++
++static PBOARD_PARAMETERS g_BoardParms[] =
++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
++ &g_bcmCustom_01, 0};
++#endif
++
++static PBOARD_PARAMETERS g_pCurrentBp = 0;
++
++/**************************************************************************
++ * Name : bpstrcmp
++ *
++ * Description: String compare for this file so it does not depend on an OS.
++ * (Linux kernel and CFE share this source file.)
++ *
++ * Parameters : [IN] dest - destination string
++ * [IN] src - source string
++ *
++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
++ ***************************************************************************/
++static int bpstrcmp(const char *dest,const char *src);
++static int bpstrcmp(const char *dest,const char *src)
++{
++ while (*src && *dest)
++ {
++ if (*dest < *src) return -1;
++ if (*dest > *src) return 1;
++ dest++;
++ src++;
++ }
++
++ if (*dest && !*src) return 1;
++ if (!*dest && *src) return -1;
++ return 0;
++} /* bpstrcmp */
++
++/**************************************************************************
++ * Name : BpGetVoipDspConfig
++ *
++ * Description: Gets the DSP configuration from the board parameter
++ * structure for a given DSP index.
++ *
++ * Parameters : [IN] dspNum - DSP index (number)
++ *
++ * Returns : Pointer to DSP configuration block if found/valid, NULL
++ * otherwise.
++ ***************************************************************************/
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
++{
++ VOIP_DSP_INFO *pDspConfig = 0;
++ int i;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
++ {
++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
++ {
++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
++ break;
++ }
++ }
++ }
++
++ return pDspConfig;
++}
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId )
++{
++ int nRet = BP_BOARD_ID_NOT_FOUND;
++ PBOARD_PARAMETERS *ppBp;
++
++ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
++ {
++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
++ {
++ g_pCurrentBp = *ppBp;
++ nRet = BP_SUCCESS;
++ break;
++ }
++ }
++
++ return( nRet );
++} /* BpSetBoardId */
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
++{
++ PBOARD_PARAMETERS *ppBp;
++ int i;
++ char *src;
++ char *dest;
++
++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
++ {
++ dest = pszBoardIds;
++ src = (*ppBp)->szBoardId;
++ while( *src )
++ *dest++ = *src++;
++ *dest = '\0';
++ }
++
++ return( i );
++} /* BpGetBoardIds */
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
++{
++ int i, nRet;
++
++ if( g_pCurrentBp )
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ {
++ if( i < BP_MAX_ENET_MACS )
++ {
++ unsigned char *src = (unsigned char *)
++ &g_pCurrentBp->EnetMacInfos[i];
++ unsigned char *dest = (unsigned char *) pEnetInfos;
++ int len = sizeof(ETHERNET_MAC_INFO);
++ while( len-- )
++ *dest++ = *src++;
++ }
++ else
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++ }
++
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
++
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetEthernetMacInfo */
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulSdramSize = g_pCurrentBp->usSdramSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulSdramSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetSdramSize */
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulPsiSize = g_pCurrentBp->usPsiSize;
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ *pulPsiSize = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPsiSize */
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
++
++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusInner = *pusOuter = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetRj11InnerOuterPairGpios */
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
++
++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPressAndHoldResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipReset;
++
++ if( *pusValue != BP_NOT_DEFINED ||
++ *pusValue == BP_UNEQUIPPED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipResetGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioVoipIntr;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipIntrGpio */
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
++
++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPcmciaResetGpio */
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusRts = g_pCurrentBp->usGpioUartRts;
++ *pusCts = g_pCurrentBp->usGpioUartCts;
++
++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusRts = *pusCts = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUartRtsCtsGpios */
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdsl;
++
++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslLedGpio */
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
++
++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWireless;
++
++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usAntInUseWireless;
++
++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessAntInUse */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
++
++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessSesBtnGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
++
++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesExtIntr */
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
++
++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++
++} /* BpGetWirelessSesLedGpio */
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedUsb;
++
++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetUsbLedGpio */
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedHpna;
++
++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedWanData;
++
++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWanDataLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPpp;
++
++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppLedGpio */
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedPppFail;
++
++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetPppFailLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
++
++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderPowerOn */
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
++
++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderAlarmLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
++
++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderResetCfgLedGpio */
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pusValue = g_pCurrentBp->usGpioLedBlStop;
++
++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetBootloaderStopLedGpio */
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ *
++ * Note : The VoIP structure would allow for having one LED per DSP
++ * however, the board initialization function assumes only one
++ * LED per functionality (ie one LED for VoIP). Therefore in
++ * order to keep this tidy and simple we do not make usage of the
++ * one-LED-per-DSP function. Instead, we assume that the LED for
++ * VoIP is unique and associated with DSP 0 (always present on
++ * any VoIP platform). If changing this to a LED-per-DSP function
++ * then one need to update the board initialization driver in
++ * bcmdrivers\opensource\char\board\bcm963xx\impl1
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
++
++ if( pDspInfo )
++ {
++ *pusValue = pDspInfo->usGpioLedVoip;
++
++ if( *pusValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pusValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipLedGpio */
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrWireless;
++
++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetWirelessExtIntr */
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
++
++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetAdslDyingGaspExtIntr */
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usExtIntrVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usExtIntrHpna;
++
++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaExtIntr */
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ *pulValue = g_pCurrentBp->usCsHpna;
++
++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetHpnaChipSelect */
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
++{
++ int nRet;
++
++ if( g_pCurrentBp )
++ {
++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
++
++ if( pDspInfo )
++ {
++ *pulValue = pDspInfo->usCsVoip;
++
++ if( *pulValue != BP_NOT_DEFINED )
++ {
++ nRet = BP_SUCCESS;
++ }
++ else
++ {
++ nRet = BP_VALUE_NOT_DEFINED;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_FOUND;
++ }
++ }
++ else
++ {
++ *pulValue = BP_NOT_DEFINED;
++ nRet = BP_BOARD_ID_NOT_SET;
++ }
++
++ return( nRet );
++} /* BpGetVoipChipSelect */
++
+diff -urN linux.old/boardparms/bcm963xx/boardparms.h linux.dev/boardparms/bcm963xx/boardparms.h
+--- linux.old/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/boardparms/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,766 @@
++/*
++<:copyright-gpl
++
++ Copyright 2003 Broadcom Corp. All Rights Reserved.
++
++ This program is free software; you can distribute it and/or modify it
++ under the terms of the GNU General Public License (Version 2) as
++ published by the Free Software Foundation.
++
++ This program is distributed in the hope it will be useful, but WITHOUT
++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ for more details.
++
++ You should have received a copy of the GNU General Public License along
++ with this program; if not, write to the Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++
++:>
++*/
++/**************************************************************************
++ * File Name : boardparms.h
++ *
++ * Description: This file contains definitions and function prototypes for
++ * the BCM63xx board parameter access functions.
++ *
++ * Updates : 07/14/2003 Created.
++ ***************************************************************************/
++
++#if !defined(_BOARDPARMS_H)
++#define _BOARDPARMS_H
++
++#if __cplusplus
++extern "C" {
++#endif
++
++/* Return codes. */
++#define BP_SUCCESS 0
++#define BP_BOARD_ID_NOT_FOUND 1
++#define BP_VALUE_NOT_DEFINED 2
++#define BP_BOARD_ID_NOT_SET 3
++
++/* Values for BpGetSdramSize. */
++#define BP_MEMORY_8MB_1_CHIP 0
++#define BP_MEMORY_16MB_1_CHIP 1
++#define BP_MEMORY_32MB_1_CHIP 2
++#define BP_MEMORY_64MB_2_CHIP 3
++#define BP_MEMORY_32MB_2_CHIP 4
++#define BP_MEMORY_16MB_2_CHIP 5
++
++/* Values for EthernetMacInfo PhyType. */
++#define BP_ENET_NO_PHY 0
++#define BP_ENET_INTERNAL_PHY 1
++#define BP_ENET_EXTERNAL_PHY 2
++#define BP_ENET_EXTERNAL_SWITCH 3
++
++/* Values for EthernetMacInfo Configuration type. */
++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
++
++/* Values for EthernetMacInfo Reverse MII. */
++#define BP_ENET_NO_REVERSE_MII 0
++#define BP_ENET_REVERSE_MII 1
++
++/* Values for VoIPDSPInfo DSPType. */
++#define BP_VOIP_NO_DSP 0
++#define BP_VOIP_DSP 1
++
++
++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
++#define BP_ACTIVE_MASK 0x8000
++#define BP_ACTIVE_HIGH 0x0000
++#define BP_ACTIVE_LOW 0x8000
++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
++
++/* Values for external interrupt assignments. */
++#define BP_EXT_INTR_0 0
++#define BP_EXT_INTR_1 1
++#define BP_EXT_INTR_2 2
++#define BP_EXT_INTR_3 3
++
++/* Values for chip select assignments. */
++#define BP_CS_0 0
++#define BP_CS_1 1
++#define BP_CS_2 2
++#define BP_CS_3 3
++
++/* Value for GPIO and external interrupt fields that are not used. */
++#define BP_NOT_DEFINED 0xffff
++#define BP_HW_DEFINED 0xfff0
++#define BP_UNEQUIPPED 0xfff1
++
++/* Maximum size of the board id string. */
++#define BP_BOARD_ID_LEN 16
++
++/* Maximum number of Ethernet MACs. */
++#define BP_MAX_ENET_MACS 2
++
++/* Maximum number of VoIP DSPs. */
++#define BP_MAX_VOIP_DSP 2
++
++/* Wireless Antenna Settings. */
++#define BP_WLAN_ANT_MAIN 0
++#define BP_WLAN_ANT_AUX 1
++#define BP_WLAN_ANT_BOTH 3
++
++#if !defined(__ASSEMBLER__)
++
++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
++ * then the other fields are not valid.
++ */
++typedef struct EthernetMacInfo
++{
++ unsigned char ucPhyType; /* BP_ENET_xxx */
++ unsigned char ucPhyAddress; /* 0 to 31 */
++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
++ unsigned short numSwitchPorts; /* Number of PHY ports */
++ unsigned short usConfigType; /* Configuration type */
++ unsigned short usReverseMii; /* Reverse MII */
++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
++
++
++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
++ * then the other fields are not valid.
++ */
++typedef struct VoIPDspInfo
++{
++ unsigned char ucDspType;
++ unsigned char ucDspAddress;
++ unsigned short usExtIntrVoip;
++ unsigned short usGpioVoipReset;
++ unsigned short usGpioVoipIntr;
++ unsigned short usGpioLedVoip;
++ unsigned short usCsVoip;
++
++} VOIP_DSP_INFO;
++
++
++/**************************************************************************
++ * Name : BpSetBoardId
++ *
++ * Description: This function find the BOARD_PARAMETERS structure for the
++ * specified board id string and assigns it to a global, static
++ * variable.
++ *
++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
++ * have a board parameters configuration record.
++ ***************************************************************************/
++int BpSetBoardId( char *pszBoardId );
++
++/**************************************************************************
++ * Name : BpGetBoardIds
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
++ * boundary.
++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
++ * were allocated in pszBoardIds.
++ *
++ * Returns : Number of board id strings returned.
++ ***************************************************************************/
++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
++
++/**************************************************************************
++ * Name : BpGetEthernetMacInfo
++ *
++ * Description: This function returns all of the supported board id strings.
++ *
++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
++ * buffers.
++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
++ * are pointed to by pEnetInfos.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
++
++/**************************************************************************
++ * Name : BpGetSdramSize
++ *
++ * Description: This function returns a constant that describees the board's
++ * SDRAM type and size.
++ *
++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
++ * is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetSdramSize( unsigned long *pulSdramSize );
++
++/**************************************************************************
++ * Name : BpGetPsiSize
++ *
++ * Description: This function returns the persistent storage size in K bytes.
++ *
++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
++ * storage size is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ ***************************************************************************/
++int BpGetPsiSize( unsigned long *pulPsiSize );
++
++/**************************************************************************
++ * Name : BpGetRj11InnerOuterPairGpios
++ *
++ * Description: This function returns the GPIO pin assignments for changing
++ * between the RJ11 inner pair and RJ11 outer pair.
++ *
++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
++ * GPIO pin is returned in.
++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
++ unsigned short *pusOuter );
++
++/**************************************************************************
++ * Name : BpGetPressAndHoldResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the press
++ * and hold reset button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the press and hold
++ * reset button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipIntrGpio
++ *
++ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
++ * GPIO pin is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPcmciaResetGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PCMCIA
++ * Reset operation.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPcmciaResetGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUartRtsCtsGpios
++ *
++ * Description: This function returns the GPIO pin assignments for RTS and CTS
++ * UART signals.
++ *
++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
++ * pin is returned in.
++ * [OUT] pusCts - Address of short word that the UART CTS GPIO
++ * pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, values are returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
++
++/**************************************************************************
++ * Name : BpGetAdslLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetAdslFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the ADSL
++ * LED that is used when there is a DSL connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessAntInUse
++ *
++ * Description: This function returns the antennas in use for wireless
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
++ * is in use.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessAntInUse( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesBtnGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Button GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesExtIntr
++ *
++ * Description: This function returns the external interrupt number for the
++ * Wireless Ses Button.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * external interrup is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesExtIntr( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessSesLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the Wireless
++ * Ses Led.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
++ * Led GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessSesLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetUsbLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the USB
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the USB LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetUsbLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the HPNA
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWanDataLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the WAN Data
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWanDataLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetPppFailLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the PPP
++ * LED that is used when there is a PPP connection failure.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetPppFailLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetVoipLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the VOIP
++ * LED.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderPowerOnLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the power
++ * on LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderAlarmLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the alarm
++ * LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
++ * GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderResetCfgLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the reset
++ * configuration LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the reset
++ * configuration LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetBootloaderStopLedGpio
++ *
++ * Description: This function returns the GPIO pin assignment for the break
++ * into bootloader LED that is set by the bootloader.
++ *
++ * Parameters : [OUT] pusValue - Address of short word that the break into
++ * bootloader LED GPIO pin is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
++
++/**************************************************************************
++ * Name : BpGetWirelessExtIntr
++ *
++ * Description: This function returns the Wireless external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the wireless
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetWirelessExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetAdslDyingGaspExtIntr
++ *
++ * Description: This function returns the ADSL Dying Gasp external interrupt
++ * number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipExtIntr
++ *
++ * Description: This function returns the VOIP external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * external interrupt number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaExtIntr
++ *
++ * Description: This function returns the HPNA external interrupt number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * external interrupt number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaExtIntr( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetHpnaChipSelect
++ *
++ * Description: This function returns the HPNA chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the HPNA
++ * chip select number is returned in.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetHpnaChipSelect( unsigned long *pulValue );
++
++/**************************************************************************
++ * Name : BpGetVoipChipSelect
++ *
++ * Description: This function returns the VOIP chip select number.
++ *
++ * Parameters : [OUT] pulValue - Address of short word that the VOIP
++ * chip select number is returned in.
++ * [IN] dspNum - Address of the DSP to query.
++ *
++ * Returns : BP_SUCCESS - Success, value is returned.
++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
++ * for the board.
++ ***************************************************************************/
++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
++
++#endif /* __ASSEMBLER__ */
++
++#if __cplusplus
++}
++#endif
++
++#endif /* _BOARDPARMS_H */
++
+diff -urN linux.old/boardparms/bcm963xx/Makefile linux.dev/boardparms/bcm963xx/Makefile
+--- linux.old/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/boardparms/bcm963xx/Makefile 2006-08-25 00:39:38.000000000 +0200
+@@ -0,0 +1,16 @@
++
++ifeq ($(CONFIG_MIPS_BRCM),y)
++
++# Linux
++obj-y += boardparms.o
++EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP)
++-include $(TOPDIR)/Rules.make
++
++else
++
++# CFE
++BSPOBJS += boardparms.o
++
++endif
++
++
+diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
+--- linux.old/include/asm-mips/bootinfo.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/bootinfo.h 2006-08-25 00:39:38.000000000 +0200
+@@ -218,6 +218,14 @@
+ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
+ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
+
++/*
++ * Valid machtype for group BRCM
++ */
++#define MACH_GROUP_BRCM 23 /* Broadcom boards */
++#define MACH_BCM96338 0
++#define MACH_BCM96345 1
++#define MACH_BCM96348 2
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
+diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
+--- linux.old/include/asm-mips/cpu.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/cpu.h 2006-08-25 00:39:38.000000000 +0200
+@@ -103,6 +103,13 @@
+
+ #define PRID_IMP_SR71000 0x0400
+
++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
++ */
++
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
++
+ /*
+ * Definitions for 7:0 on legacy processors
+ */
+@@ -200,7 +207,10 @@
+ #define CPU_SB1A 62
+ #define CPU_74K 63
+ #define CPU_R14000 64
+-#define CPU_LAST 64
++#define CPU_BCM6338 65
++#define CPU_BCM6345 66
++#define CPU_BCM6348 67
++#define CPU_LAST 67
+
+ /*
+ * ISA Level encodings
+diff -urN linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
+--- linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-08-25 11:27:40.000000000 +0200
+@@ -0,0 +1,36 @@
++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb 1
++#define cpu_has_4kex 4
++#define cpu_has_4ktlb 8
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 0x40
++#define cpu_has_watch 0
++#define cpu_has_mips16 0
++#define cpu_has_divec 0x200
++#define cpu_has_vce 0
++#define cpu_has_cache_cdex_p 0
++#define cpu_has_cache_cdex_s 0
++#define cpu_has_prefetch 0x40000
++#define cpu_has_mcheck 0x2000
++#define cpu_has_ejtag 0x4000
++#define cpu_has_llsc 0x10000
++#define cpu_has_vtag_icache 0
++#define cpu_has_dc_aliases 0
++#define cpu_has_ic_fills_f_dc 0
++
++#define cpu_has_nofpuex 0
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++#define cpu_has_subset_pcaches 0
++
++#define cpu_dcache_line_size() 16
++#define cpu_icache_line_size() 16
++#define cpu_scache_line_size() 0
++
++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
+diff -urN linux.old/include/asm-mips/mach-generic/param.h linux.dev/include/asm-mips/mach-generic/param.h
+--- linux.old/include/asm-mips/mach-generic/param.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/mach-generic/param.h 2006-08-25 00:39:38.000000000 +0200
+@@ -8,6 +8,6 @@
+ #ifndef __ASM_MACH_GENERIC_PARAM_H
+ #define __ASM_MACH_GENERIC_PARAM_H
+
+-#define HZ 1000 /* Internal kernel timer frequency */
++#define HZ 200 /* Internal kernel timer frequency */
+
+ #endif /* __ASM_MACH_GENERIC_PARAM_H */
+diff -urN linux.old/include/asm-mips/module.h linux.dev/include/asm-mips/module.h
+--- linux.old/include/asm-mips/module.h 2006-08-25 00:43:22.000000000 +0200
++++ linux.dev/include/asm-mips/module.h 2006-08-25 00:39:38.000000000 +0200
+@@ -113,6 +113,12 @@
+ #define MODULE_PROC_FAMILY "RM9000 "
+ #elif defined CONFIG_CPU_SB1
+ #define MODULE_PROC_FAMILY "SB1 "
++#elif defined CONFIG_CPU_BCM6338
++#define MODULE_PROC_FAMILY "BCM6338 "
++#elif defined CONFIG_CPU_BCM6345
++#define MODULE_PROC_FAMILY "BCM6345 "
++#elif defined CONFIG_CPU_BCM6348
++#define MODULE_PROC_FAMILY "BCM6348 "
+ #else
+ #error MODULE_PROC_FAMILY undefined for your processor configuration
+ #endif
diff --git a/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch b/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch
deleted file mode 100644
index 9e66798985..0000000000
--- a/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch
+++ /dev/null
@@ -1,9249 +0,0 @@
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,775 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ ***************************************************************************
-+ * File Name : bcm63xx_flash.c
-+ *
-+ * Description: This file contains the flash device driver APIs for bcm63xx board.
-+ *
-+ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
-+ *
-+ ***************************************************************************/
-+
-+
-+/* Includes. */
-+#include <linux/fs.h>
-+#include <linux/capability.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <asm/uaccess.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+#define BCMTAG_EXE_USE
-+#include <bcmTag.h>
-+#include "cfiflash.h"
-+#include "boardparms.h"
-+
-+//#define DEBUG_FLASH
-+
-+static FLASH_ADDR_INFO fInfo;
-+static int flashInitialized = 0;
-+
-+void *retriedKmalloc(size_t size)
-+{
-+ void *pBuf;
-+ int tryCount = 0;
-+
-+ // try 1000 times before quit
-+ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000))
-+ {
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule_timeout(HZ/10);
-+ }
-+ if (tryCount >= 1000)
-+ pBuf = NULL;
-+ else
-+ memset(pBuf, 0, size);
-+
-+ return pBuf;
-+}
-+
-+void retriedKfree(void *pBuf)
-+{
-+ kfree(pBuf);
-+}
-+
-+/***************************************************************************
-+// Function Name: getCrc32
-+// Description : caculate the CRC 32 of the given data.
-+// Parameters : pdata - array of data.
-+// size - number of input data bytes.
-+// crc - either CRC32_INIT_VALUE or previous return value.
-+// Returns : crc.
-+****************************************************************************/
-+UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc)
-+{
-+ while (size-- > 0)
-+ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff];
-+
-+ return crc;
-+}
-+
-+// get the nvram start addr
-+//
-+unsigned long get_nvram_start_addr(void)
-+{
-+ return ((unsigned long)
-+ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset));
-+}
-+
-+// get the scratch_pad start addr
-+//
-+unsigned long get_scratch_pad_start_addr(void)
-+{
-+ return ((unsigned long)
-+ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset));
-+}
-+
-+
-+
-+/* *********************************************************************
-+ * kerSysImageTagGet()
-+ * Get the image tag
-+ * Input parameters:
-+ * none
-+ * Return value:
-+ * point to tag -- Found
-+ * NULL -- failed
-+ ********************************************************************* */
-+PFILE_TAG kerSysImageTagGet(void)
-+{
-+ int i;
-+ int totalBlks = flash_get_numsectors();
-+ UINT32 crc;
-+ unsigned char *sectAddr;
-+ PFILE_TAG pTag;
-+
-+#if defined(DEBUG_FLASH)
-+ printk("totalblks in tagGet=%d\n", totalBlks);
-+#endif
-+
-+ // start from 2nd blk, assume 1st one is always CFE
-+ for (i = 1; i < totalBlks; i++)
-+ {
-+ sectAddr = flash_get_memptr((byte) i);
-+ crc = CRC32_INIT_VALUE;
-+ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc);
-+ pTag = (PFILE_TAG) sectAddr;
-+
-+#if defined(DEBUG_FLASH)
-+ printk("Check Tag crc on blk [%d]\n", i);
-+#endif
-+
-+ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken)))
-+ return pTag;
-+ }
-+
-+ return (PFILE_TAG) NULL;
-+}
-+
-+// Initialize the flash and fill out the fInfo structure
-+void kerSysFlashInit( void )
-+{
-+ int i = 0;
-+ int totalBlks = 0;
-+ int totalSize = 0;
-+ int startAddr = 0;
-+ int usedBlkSize = 0;
-+ NVRAM_DATA nvramData;
-+ UINT32 crc = CRC32_INIT_VALUE, savedCrc;
-+ PFILE_TAG pTag = NULL;
-+ unsigned long kernelEndAddr = 0;
-+ unsigned long spAddr = 0;
-+
-+ if (flashInitialized)
-+ return;
-+
-+ flashInitialized = 1;
-+ flash_init();
-+
-+ totalBlks = flash_get_numsectors();
-+ totalSize = flash_get_total_size();
-+
-+ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks);
-+
-+ /* nvram is always at the end of flash */
-+ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM;
-+ fInfo.flash_nvram_start_blk = 0; /* always the first block */
-+ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */
-+ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET;
-+
-+ // check nvram CRC
-+ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA));
-+ savedCrc = nvramData.ulCheckSum;
-+ nvramData.ulCheckSum = 0;
-+ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc);
-+
-+ BpSetBoardId( nvramData.szBoardId );
-+
-+ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT;
-+ if (savedCrc != crc)
-+ {
-+ printk("***Board is not initialized****: Using the default PSI size: %d\n",
-+ fInfo.flash_persistent_length);
-+ }
-+ else
-+ {
-+ unsigned long ulPsiSize;
-+ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS )
-+ fInfo.flash_persistent_length = ulPsiSize;
-+ else
-+ {
-+ printk("***Board id is not set****: Using the default PSI size: %d\n",
-+ fInfo.flash_persistent_length);
-+ }
-+ }
-+
-+ fInfo.flash_persistent_length *= ONEK;
-+ startAddr = totalSize - fInfo.flash_persistent_length;
-+ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG);
-+ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk;
-+ // save abs SP address (Scratch Pad). it is before PSI
-+ spAddr = startAddr - SP_MAX_LEN ;
-+ // find out the offset in the start_blk
-+ usedBlkSize = 0;
-+ for (i = fInfo.flash_persistent_start_blk;
-+ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++)
-+ {
-+ usedBlkSize += flash_get_sector_size((byte) i);
-+ }
-+ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length;
-+
-+ // get the info for sp
-+ if (!(pTag = kerSysImageTagGet()))
-+ {
-+ printk("Failed to read image tag from flash\n");
-+ return;
-+ }
-+ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \
-+ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10);
-+
-+ // make suer sp does not share kernel block
-+ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG);
-+ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr))
-+ {
-+ fInfo.flash_scratch_pad_length = SP_MAX_LEN;
-+ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk
-+ {
-+#if 1 /* do not used scratch pad unless it's in its own sector */
-+ printk("Scratch pad is not used for this flash part.\n");
-+ fInfo.flash_scratch_pad_length = 0; // no sp
-+#else /* allow scratch pad to share a sector with another section such as PSI */
-+ fInfo.flash_scratch_pad_number_blk = 1;
-+ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length;
-+#endif
-+ }
-+ else // on different blk
-+ {
-+ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\
-+ - fInfo.flash_scratch_pad_start_blk;
-+ // find out the offset in the start_blk
-+ usedBlkSize = 0;
-+ for (i = fInfo.flash_scratch_pad_start_blk;
-+ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++)
-+ usedBlkSize += flash_get_sector_size((byte) i);
-+ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length;
-+ }
-+ }
-+ else
-+ {
-+ printk("No flash for scratch pad!\n");
-+ fInfo.flash_scratch_pad_length = 0; // no sp
-+ }
-+
-+#if defined(DEBUG_FLASH)
-+ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk);
-+ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk);
-+ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length);
-+ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset);
-+
-+ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk);
-+ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset);
-+ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk);
-+
-+ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG);
-+ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk);
-+ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset);
-+ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk);
-+#endif
-+
-+}
-+
-+
-+
-+/***********************************************************************
-+ * Function Name: kerSysFlashAddrInfoGet
-+ * Description : Fills in a structure with information about the NVRAM
-+ * and persistent storage sections of flash memory.
-+ * Fro physmap.c to mount the fs vol.
-+ * Returns : None.
-+ ***********************************************************************/
-+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info)
-+{
-+ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset;
-+ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length;
-+ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk;
-+ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk;
-+ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset;
-+ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length;
-+ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk;
-+ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk;
-+}
-+
-+
-+// get shared blks into *** pTempBuf *** which has to be released bye the caller!
-+// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer
-+// !NULL -- ok
-+// NULL -- fail
-+static char *getSharedBlks(int start_blk, int end_blk)
-+{
-+ int i = 0;
-+ int usedBlkSize = 0;
-+ int sect_size = 0;
-+ char *pTempBuf = NULL;
-+ char *pBuf = NULL;
-+
-+ for (i = start_blk; i < end_blk; i++)
-+ usedBlkSize += flash_get_sector_size((byte) i);
-+
-+#if defined(DEBUG_FLASH)
-+ printk("usedBlkSize = %d\n", usedBlkSize);
-+#endif
-+
-+ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL)
-+ {
-+ printk("failed to allocate memory with size: %d\n", usedBlkSize);
-+ return pTempBuf;
-+ }
-+
-+ pBuf = pTempBuf;
-+ for (i = start_blk; i < end_blk; i++)
-+ {
-+ sect_size = flash_get_sector_size((byte) i);
-+
-+#if defined(DEBUG_FLASH)
-+ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk);
-+#endif
-+ flash_read_buf((byte)i, 0, pBuf, sect_size);
-+ pBuf += sect_size;
-+ }
-+
-+ return pTempBuf;
-+}
-+
-+
-+
-+// Set the pTempBuf to flash from start_blk to end_blk
-+// return:
-+// 0 -- ok
-+// -1 -- fail
-+static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf)
-+{
-+ int i = 0;
-+ int sect_size = 0;
-+ int sts = 0;
-+ char *pBuf = pTempBuf;
-+
-+ for (i = start_blk; i < end_blk; i++)
-+ {
-+ sect_size = flash_get_sector_size((byte) i);
-+ flash_sector_erase_int(i);
-+ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size)
-+ {
-+ printk("Error writing flash sector %d.", i);
-+ sts = -1;
-+ break;
-+ }
-+ pBuf += sect_size;
-+ }
-+
-+ return sts;
-+}
-+
-+
-+
-+/*******************************************************************************
-+ * NVRAM functions
-+ *******************************************************************************/
-+
-+// get nvram data
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysNvRamGet(char *string, int strLen, int offset)
-+{
-+ char *pBuf = NULL;
-+
-+ if (!flashInitialized)
-+ kerSysFlashInit();
-+
-+ if (strLen > FLASH45_LENGTH_NVRAM)
-+ return -1;
-+
-+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
-+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
-+ return -1;
-+
-+ // get string off the memory buffer
-+ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen);
-+
-+ retriedKfree(pBuf);
-+
-+ return 0;
-+}
-+
-+
-+// set nvram
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysNvRamSet(char *string, int strLen, int offset)
-+{
-+ int sts = 0;
-+ char *pBuf = NULL;
-+
-+ if (strLen > FLASH45_LENGTH_NVRAM)
-+ return -1;
-+
-+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk,
-+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL)
-+ return -1;
-+
-+ // set string to the memory buffer
-+ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen);
-+
-+ if (setSharedBlks(fInfo.flash_nvram_start_blk,
-+ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0)
-+ sts = -1;
-+
-+ retriedKfree(pBuf);
-+
-+ return sts;
-+}
-+
-+
-+/***********************************************************************
-+ * Function Name: kerSysEraseNvRam
-+ * Description : Erase the NVRAM storage section of flash memory.
-+ * Returns : 1 -- ok, 0 -- fail
-+ ***********************************************************************/
-+int kerSysEraseNvRam(void)
-+{
-+ int sts = 1;
-+ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM);
-+
-+ // just write the whole buf with '0xff' to the flash
-+ if (!tempStorage)
-+ sts = 0;
-+ else
-+ {
-+ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM);
-+ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0)
-+ sts = 0;
-+ retriedKfree(tempStorage);
-+ }
-+
-+ return sts;
-+}
-+
-+
-+/*******************************************************************************
-+ * PSI functions
-+ *******************************************************************************/
-+// get psi data
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysPersistentGet(char *string, int strLen, int offset)
-+{
-+ char *pBuf = NULL;
-+
-+ if (strLen > fInfo.flash_persistent_length)
-+ return -1;
-+
-+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
-+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
-+ return -1;
-+
-+ // get string off the memory buffer
-+ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen);
-+
-+ retriedKfree(pBuf);
-+
-+ return 0;
-+}
-+
-+
-+// set psi
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysPersistentSet(char *string, int strLen, int offset)
-+{
-+ int sts = 0;
-+ char *pBuf = NULL;
-+
-+ if (strLen > fInfo.flash_persistent_length)
-+ return -1;
-+
-+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk,
-+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL)
-+ return -1;
-+
-+ // set string to the memory buffer
-+ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen);
-+
-+ if (setSharedBlks(fInfo.flash_persistent_start_blk,
-+ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0)
-+ sts = -1;
-+
-+ retriedKfree(pBuf);
-+
-+ return sts;
-+}
-+
-+
-+// flash bcm image
-+// return:
-+// 0 - ok
-+// !0 - the sector number fail to be flashed (should not be 0)
-+int kerSysBcmImageSet( int flash_start_addr, char *string, int size)
-+{
-+ int sts;
-+ int sect_size;
-+ int blk_start;
-+ int i;
-+ char *pTempBuf = NULL;
-+ int whole_image = 0;
-+
-+ blk_start = flash_get_blk(flash_start_addr);
-+ if( blk_start < 0 )
-+ return( -1 );
-+
-+ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM)
-+ whole_image = 1;
-+
-+ /* write image to flash memory */
-+ do
-+ {
-+ sect_size = flash_get_sector_size(blk_start);
-+// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now.
-+// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
-+// {
-+// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
-+// kerSysMipsSoftReset(); // reset the board right away.
-+// }
-+ // for whole image, no check on psi
-+ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi
-+ {
-+ if (size > (sect_size - fInfo.flash_persistent_length))
-+ {
-+ printk("Image is too big\n");
-+ break; // image is too big. Can not overwrite to nvram
-+ }
-+ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL)
-+ {
-+ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size);
-+ kerSysMipsSoftReset(); // reset the board right away.
-+ }
-+ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size);
-+ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0)
-+ break; // failed ?
-+ flash_sector_erase_int(blk_start); // erase blk before flash
-+ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size)
-+ size = 0; // break out and say all is ok
-+ retriedKfree(pTempBuf);
-+ break;
-+ }
-+
-+ flash_sector_erase_int(blk_start); // erase blk before flash
-+
-+ if (sect_size > size)
-+ {
-+ if (size & 1)
-+ size++;
-+ sect_size = size;
-+ }
-+
-+ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) {
-+ break;
-+ }
-+ blk_start++;
-+ string += sect_size;
-+ size -= sect_size;
-+ } while (size > 0);
-+
-+ if (whole_image)
-+ {
-+ // If flashing a whole image, erase to end of flash.
-+ int total_blks = flash_get_numsectors();
-+ while( blk_start < total_blks )
-+ {
-+ flash_sector_erase_int(blk_start);
-+ blk_start++;
-+ }
-+ }
-+ if (pTempBuf)
-+ retriedKfree(pTempBuf);
-+
-+ if( size == 0 )
-+ sts = 0; // ok
-+ else
-+ sts = blk_start; // failed to flash this sector
-+
-+ return sts;
-+}
-+
-+/*******************************************************************************
-+ * SP functions
-+ *******************************************************************************/
-+// get sp data. NOTE: memcpy work here -- not using copy_from/to_user
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen)
-+{
-+ PSP_HEADER pHead = NULL;
-+ PSP_TOKEN pToken = NULL;
-+ char *pBuf = NULL;
-+ char *pShareBuf = NULL;
-+ char *startPtr = NULL;
-+ char *endPtr = NULL;
-+ char *spEndPtr = NULL;
-+ int sts = -1;
-+
-+ if (fInfo.flash_scratch_pad_length == 0)
-+ return sts;
-+
-+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
-+ {
-+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
-+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
-+ return sts;
-+ }
-+
-+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
-+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
-+ return sts;
-+
-+ // pBuf points to SP buf
-+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
-+
-+ pHead = (PSP_HEADER) pBuf;
-+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
-+ {
-+ printk("Scrap pad is not initialized.\n");
-+ return sts;
-+ }
-+
-+ // search up to SPUsedLen for the token
-+ startPtr = pBuf + sizeof(SP_HEADER);
-+ endPtr = pBuf + pHead->SPUsedLen;
-+ spEndPtr = pBuf + SP_MAX_LEN;
-+ while (startPtr < endPtr && startPtr < spEndPtr)
-+ {
-+ pToken = (PSP_TOKEN) startPtr;
-+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
-+ {
-+ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen);
-+ sts = 0;
-+ break;
-+ }
-+ // get next token
-+ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
-+ }
-+
-+ retriedKfree(pShareBuf);
-+
-+ return sts;
-+}
-+
-+
-+// set sp. NOTE: memcpy work here -- not using copy_from/to_user
-+// return:
-+// 0 - ok
-+// -1 - fail
-+int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen)
-+{
-+ PSP_TOKEN pToken = NULL;
-+ PSP_HEADER pHead = NULL;
-+ char *pShareBuf = NULL;
-+ char *pBuf = NULL;
-+ SP_HEADER SPHead;
-+ SP_TOKEN SPToken;
-+ char *curPtr;
-+ int sts = -1;
-+
-+ if (fInfo.flash_scratch_pad_length == 0)
-+ return sts;
-+
-+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN)))
-+ {
-+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \
-+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN));
-+ return sts;
-+ }
-+
-+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk,
-+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL)
-+ return sts;
-+
-+ // pBuf points to SP buf
-+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset;
-+ pHead = (PSP_HEADER) pBuf;
-+
-+ // form header info. SPUsedLen later on...
-+ memset((char *)&SPHead, 0, sizeof(SP_HEADER));
-+ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN);
-+ SPHead.SPVersion = SP_VERSION;
-+
-+ // form token info.
-+ memset((char*)&SPToken, 0, sizeof(SP_TOKEN));
-+ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1);
-+ SPToken.tokenLen = bufLen;
-+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0)
-+ {
-+ // new sp, so just flash the token
-+ printk("No Scrap pad found. Initialize scratch pad...\n");
-+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen;
-+ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER));
-+ curPtr = pBuf + sizeof(SP_HEADER);
-+ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN));
-+ curPtr += sizeof(SP_TOKEN);
-+ memcpy(curPtr, tokBuf, bufLen);
-+ }
-+ else
-+ {
-+ // need search for the token, if exist with same size overwrite it. if sizes differ,
-+ // move over the later token data over and put the new one at the end
-+ char *endPtr = pBuf + pHead->SPUsedLen;
-+ char *spEndPtr = pBuf + SP_MAX_LEN;
-+ curPtr = pBuf + sizeof(SP_HEADER);
-+ while (curPtr < endPtr && curPtr < spEndPtr)
-+ {
-+ pToken = (PSP_TOKEN) curPtr;
-+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0)
-+ {
-+ if (pToken->tokenLen == bufLen) // overwirte it
-+ {
-+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen);
-+ break;
-+ }
-+ else // move later data over and put the new token at the end
-+ {
-+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~
-+ break;
-+ }
-+ }
-+ else // not same token ~~~
-+ {
-+ }
-+ // get next token
-+ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen;
-+ } // end while
-+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~
-+ if (SPHead.SPUsedLen > SP_MAX_LEN)
-+ {
-+ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN);
-+ return sts;
-+ }
-+
-+ } // else if not new sp
-+
-+ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk,
-+ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf);
-+
-+ retriedKfree(pShareBuf);
-+
-+ return sts;
-+
-+
-+}
-+
-+int kerSysFlashSizeGet(void)
-+{
-+ return flash_get_total_size();
-+}
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,582 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/***************************************************************************
-+ * File Name : bcm63xx_led.c
-+ *
-+ * Description:
-+ *
-+ * This file contains bcm963xx board led control API functions.
-+ *
-+ * To use it, do the following
-+ *
-+ * 1). define in the board.c the following led mappping (this is for 6345GW board):
-+ * const LED_MAP_PAIR cLedMapping45GW[] =
-+ * { // led name Initial state physical pin (ledMask)
-+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
-+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
-+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
-+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
-+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
-+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
-+ *
-+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
-+ * pointer from the above struct
-+ *
-+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
-+ *
-+ * 3). Sample call for kernel mode:
-+ *
-+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
-+ *
-+ * 4). Sample call for user mode
-+ *
-+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
-+ *
-+ *
-+ * Created on : 10/28/2002 seanl
-+ *
-+ ***************************************************************************/
-+
-+/* Includes. */
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/capability.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <asm/uaccess.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+
-+#define k100ms (HZ / 10) // ~100 ms
-+#define kFastBlinkCount 0 // ~100ms
-+#define kSlowBlinkCount 5 // ~600ms
-+
-+#define MAX_VIRT_LEDS 12
-+
-+// uncomment // for debug led
-+//#define DEBUG_LED
-+
-+// global variables:
-+struct timer_list gLedTimer;
-+int gTimerOn = FALSE;
-+int gLedCount = 0;
-+
-+typedef struct ledinfo
-+{
-+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
-+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
-+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
-+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
-+ BOARD_LED_STATE ledState; // current led state
-+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
-+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
-+} LED_INFO, *PLED_INFO;
-+
-+static PLED_INFO gLed = NULL;
-+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
-+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
-+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
-+
-+#if 0 /* BROKEN */
-+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-+static int gLedOffInBridgeMode = 1;
-+#elif defined(CONFIG_BCM96345)
-+static int gLedOffInBridgeMode = 0;
-+#endif
-+#endif
-+
-+void ledTimerExpire(void);
-+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
-+
-+//**************************************************************************************
-+// LED operations
-+//**************************************************************************************
-+
-+// turn led on and set the ledState
-+void ledOn(PLED_INFO pLed)
-+{
-+ if( pLed->ledMask )
-+ {
-+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
-+ if( pLed->ledActiveLow )
-+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
-+ else
-+ GPIO->GPIOio |= pLed->ledMask; // turn on the led
-+ pLed->ledState = pLed->savedLedState = kLedStateOn;
-+ }
-+}
-+
-+
-+// turn led off and set the ledState
-+void ledOff(PLED_INFO pLed)
-+{
-+ if( pLed->ledMask )
-+ {
-+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
-+ if( pLed->ledActiveLow )
-+ GPIO->GPIOio |= pLed->ledMask; // turn off the led
-+ else
-+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
-+ pLed->ledState = pLed->savedLedState = kLedStateOff;
-+ }
-+}
-+
-+// turn led on and set the ledState
-+void ledOnFail(PLED_INFO pLed)
-+{
-+ if( pLed->ledMaskFail )
-+ {
-+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
-+ if( pLed->ledActiveLowFail )
-+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
-+ else
-+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
-+ pLed->ledState = pLed->savedLedState = kLedStateFail;
-+ }
-+}
-+
-+
-+// turn led off and set the ledState
-+void ledOffFail(PLED_INFO pLed)
-+{
-+ if( pLed->ledMaskFail )
-+ {
-+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
-+ if( pLed->ledActiveLowFail )
-+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
-+ else
-+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
-+ pLed->ledState = pLed->savedLedState = kLedStateOff;
-+ }
-+}
-+
-+
-+// toggle the led and return the current ledState
-+BOARD_LED_STATE ledToggle(PLED_INFO pLed)
-+{
-+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
-+ if (GPIO->GPIOio & pLed->ledMask)
-+ {
-+ GPIO->GPIOio &= ~(pLed->ledMask);
-+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
-+ }
-+ else
-+ {
-+ GPIO->GPIOio |= pLed->ledMask;
-+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
-+ }
-+}
-+
-+
-+// led timer. Will return if timer is already on
-+void ledTimerStart(void)
-+{
-+ if (gTimerOn)
-+ return;
-+
-+#if defined(DEBUG_LED)
-+ printk("led: add_timer\n");
-+#endif
-+
-+ init_timer(&gLedTimer);
-+ gLedTimer.function = (void*)ledTimerExpire;
-+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
-+ add_timer (&gLedTimer);
-+ gTimerOn = TRUE;
-+}
-+
-+
-+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
-+// restart the timer according to ledState
-+void ledTimerExpire(void)
-+{
-+ int i;
-+ PLED_INFO pCurLed;
-+
-+ gTimerOn = FALSE;
-+
-+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
-+ {
-+#if defined(DEBUG_LED)
-+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
-+#endif
-+ switch (pCurLed->ledState)
-+ {
-+ case kLedStateOn:
-+ case kLedStateOff:
-+ case kLedStateFail:
-+ pCurLed->blinkCountDown = 0; // reset the blink count down
-+ break;
-+
-+ case kLedStateBlinkOnce:
-+ ledToggle(pCurLed);
-+ pCurLed->blinkCountDown = 0; // reset to 0
-+ pCurLed->ledState = pCurLed->savedLedState;
-+ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
-+ pCurLed->ledState == kLedStateFastBlinkContinues)
-+ ledTimerStart(); // start timer if in blinkContinues stats
-+ break;
-+
-+ case kLedStateSlowBlinkContinues:
-+ if (pCurLed->blinkCountDown-- == 0)
-+ {
-+ pCurLed->blinkCountDown = kSlowBlinkCount;
-+ ledToggle(pCurLed);
-+ }
-+ ledTimerStart();
-+ break;
-+
-+ case kLedStateFastBlinkContinues:
-+ if (pCurLed->blinkCountDown-- == 0)
-+ {
-+ pCurLed->blinkCountDown = kFastBlinkCount;
-+ ledToggle(pCurLed);
-+ }
-+ ledTimerStart();
-+ break;
-+
-+ default:
-+ printk("Invalid state = %d\n", pCurLed->ledState);
-+ }
-+ }
-+}
-+
-+// initialize the gLedCount and allocate and fill gLed struct
-+void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
-+{
-+ PLED_MAP_PAIR p1, p2;
-+ PLED_INFO pCurLed;
-+ int needTimer = FALSE;
-+ int alreadyUsed = 0;
-+
-+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
-+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
-+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
-+#endif
-+
-+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
-+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
-+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
-+
-+ gLedCount = 0;
-+
-+ // Check for multiple LED names and multiple LED GPIO pins that share the
-+ // same physical board LED.
-+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-+ {
-+ alreadyUsed = 0;
-+ for( p2 = cLedMapping; p2 != p1; p2++ )
-+ {
-+ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-+ {
-+ alreadyUsed = 1;
-+ break;
-+ }
-+ }
-+
-+ if( alreadyUsed == 0 )
-+ gLedCount++;
-+ }
-+
-+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
-+ if( gLed == NULL )
-+ {
-+ printk( "LED memory allocation error.\n" );
-+ return;
-+ }
-+
-+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
-+
-+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
-+ // (ledMask) the first defined led's ledInitState will be used.
-+ pCurLed = gLed;
-+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-+ {
-+ if( (int) p1->ledName > MAX_VIRT_LEDS )
-+ continue;
-+
-+ alreadyUsed = 0;
-+ for( p2 = cLedMapping; p2 != p1; p2++ )
-+ {
-+ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-+ {
-+ alreadyUsed = 1;
-+ break;
-+ }
-+ }
-+
-+ if( alreadyUsed == 0 )
-+ {
-+ // Initialize the board LED for the first time.
-+ needTimer = initLedInfo( p1, pCurLed );
-+ gpVirtLeds[(int) p1->ledName] = pCurLed;
-+ pCurLed++;
-+ }
-+ else
-+ {
-+ PLED_INFO pLed;
-+ for( pLed = gLed; pLed != pCurLed; pLed++ )
-+ {
-+ // Find the LED_INFO structure that has already been initialized.
-+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
-+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
-+ {
-+ // The board LED has already been initialized but possibly
-+ // not completely initialized.
-+ if( p1->ledMask )
-+ {
-+ pLed->ledMask = p1->ledMask;
-+ pLed->ledActiveLow = p1->ledActiveLow;
-+ }
-+ if( p1->ledMaskFail )
-+ {
-+ pLed->ledMaskFail = p1->ledMaskFail;
-+ pLed->ledActiveLowFail = p1->ledActiveLowFail;
-+ }
-+ gpVirtLeds[(int) p1->ledName] = pLed;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+
-+ if (needTimer)
-+ ledTimerStart();
-+
-+#if defined(DEBUG_LED)
-+ int i;
-+ for (i=0; i < gLedCount; i++)
-+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
-+#endif
-+
-+}
-+
-+// Initialize a structure that contains information about a physical board LED
-+// control. The board LED may contain more than one GPIO pin to control a
-+// normal condition (green) or a failure condition (red).
-+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
-+{
-+ int needTimer = FALSE;
-+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
-+ pCurLed->ledMask = pCurMap->ledMask;
-+ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
-+ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
-+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
-+
-+ switch (pCurLed->ledState)
-+ {
-+ case kLedStateOn:
-+ pCurLed->blinkCountDown = 0; // reset the blink count down
-+ ledOn(pCurLed);
-+ break;
-+ case kLedStateOff:
-+ pCurLed->blinkCountDown = 0; // reset the blink count down
-+ ledOff(pCurLed);
-+ break;
-+ case kLedStateFail:
-+ pCurLed->blinkCountDown = 0; // reset the blink count down
-+ ledOnFail(pCurLed);
-+ break;
-+ case kLedStateBlinkOnce:
-+ pCurLed->blinkCountDown = 1;
-+ needTimer = TRUE;
-+ break;
-+ case kLedStateSlowBlinkContinues:
-+ pCurLed->blinkCountDown = kSlowBlinkCount;
-+ needTimer = TRUE;
-+ break;
-+ case kLedStateFastBlinkContinues:
-+ pCurLed->blinkCountDown = kFastBlinkCount;
-+ needTimer = TRUE;
-+ break;
-+ default:
-+ printk("Invalid state = %d\n", pCurLed->ledState);
-+ }
-+
-+ return( needTimer );
-+}
-+
-+#if 0 /* BROKEN */
-+// Determines if there is at least one interface in bridge mode. Bridge mode
-+// is determined by the cfm convention of naming bridge interfaces nas17
-+// through nas24.
-+static int isBridgedProtocol(void)
-+{
-+ extern int dev_get(const char *name);
-+ const int firstBridgeId = 17;
-+ const int lastBridgeId = 24;
-+ int i;
-+ int ret = FALSE;
-+ char name[16];
-+
-+ for( i = firstBridgeId; i <= lastBridgeId; i++ )
-+ {
-+ sprintf( name, "nas%d", i );
-+
-+ if( dev_get(name) )
-+ {
-+ ret = TRUE;
-+ break;
-+ }
-+ }
-+
-+ return(ret);
-+}
-+#endif
-+
-+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
-+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-+{
-+ PLED_INFO ledInfoPtr;
-+
-+ // do the mapping from virtual to physical led
-+ if( (int) ledName < MAX_VIRT_LEDS )
-+ ledInfoPtr = gpVirtLeds[(int) ledName];
-+ else
-+ ledInfoPtr = NULL;
-+
-+ if (ledInfoPtr == NULL)
-+ return;
-+
-+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
-+ {
-+ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
-+ ledOffFail(ledInfoPtr);
-+ return;
-+ }
-+ else
-+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
-+ {
-+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
-+ ledOff(ledInfoPtr);
-+ return;
-+ }
-+
-+#if 0 /* BROKEN */
-+ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
-+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
-+ {
-+ static int BridgedProtocol = -1;
-+
-+ if( BridgedProtocol == -1 )
-+ BridgedProtocol = isBridgedProtocol();
-+
-+ if( BridgedProtocol == TRUE )
-+ return;
-+ }
-+#endif
-+
-+ // If the state is kLedStateFail and there is not a failure LED defined
-+ // in the board parameters, change the state to kLedStateFastBlinkContinues.
-+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
-+ ledState = kLedStateFastBlinkContinues;
-+
-+ switch (ledState)
-+ {
-+ case kLedStateOn:
-+ // First, turn off the complimentary (failure) LED GPIO.
-+ if( ledInfoPtr->ledMaskFail )
-+ ledOffFail(ledInfoPtr);
-+ else
-+ if( gLedHwFailFunc[(int) ledName] )
-+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-+
-+ // Next, turn on the specified LED GPIO.
-+ ledOn(ledInfoPtr);
-+ break;
-+
-+ case kLedStateOff:
-+ // First, turn off the complimentary (failure) LED GPIO.
-+ if( ledInfoPtr->ledMaskFail )
-+ ledOffFail(ledInfoPtr);
-+ else
-+ if( gLedHwFailFunc[(int) ledName] )
-+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-+
-+ // Next, turn off the specified LED GPIO.
-+ ledOff(ledInfoPtr);
-+ break;
-+
-+ case kLedStateFail:
-+ // First, turn off the complimentary (normal) LED GPIO.
-+ if( ledInfoPtr->ledMask )
-+ ledOff(ledInfoPtr);
-+ else
-+ if( gLedHwFunc[(int) ledName] )
-+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
-+
-+ // Next, turn on (red) the specified LED GPIO.
-+ ledOnFail(ledInfoPtr);
-+ break;
-+
-+ case kLedStateBlinkOnce:
-+ // skip blinkOnce if it is already in Slow/Fast blink continues state
-+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
-+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
-+ ;
-+ else
-+ {
-+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
-+ {
-+ ledToggle(ledInfoPtr);
-+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
-+ ledInfoPtr->ledState = kLedStateBlinkOnce;
-+ ledTimerStart();
-+ }
-+ }
-+ break;
-+
-+ case kLedStateSlowBlinkContinues:
-+ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
-+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
-+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
-+ ledTimerStart();
-+ break;
-+
-+ case kLedStateFastBlinkContinues:
-+ ledInfoPtr->blinkCountDown = kFastBlinkCount;
-+ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
-+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
-+ ledTimerStart();
-+ break;
-+
-+ default:
-+ printk("Invalid led state\n");
-+ }
-+}
-+
-+// This function is called for an LED that is controlled by hardware.
-+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
-+ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
-+{
-+ if( (int) ledName < MAX_VIRT_LEDS )
-+ {
-+ if( ledFailType == 1 )
-+ gLedHwFailFunc[(int) ledName] = ledHwFunc;
-+ else
-+ gLedHwFunc[(int) ledName] = ledHwFunc;
-+ }
-+}
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/board.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c 2006-08-03 16:37:21.000000000 +0200
-@@ -0,0 +1,1781 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/***************************************************************************
-+ * File Name : board.c
-+ *
-+ * Description: This file contains Linux character device driver entry
-+ * for the board related ioctl calls: flash, get free kernel
-+ * page and dump kernel memory, etc.
-+ *
-+ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific)
-+ *
-+ ***************************************************************************/
-+
-+
-+/* Includes. */
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/capability.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/pagemap.h>
-+#include <asm/uaccess.h>
-+#include <linux/wait.h>
-+#include <linux/poll.h>
-+#include <linux/sched.h>
-+#include <linux/list.h>
-+#include <linux/if.h>
-+#include <linux/spinlock.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+#include <bcmTag.h>
-+#include "boardparms.h"
-+#include "cfiflash.h"
-+#include "bcm_intr.h"
-+#include "board.h"
-+#include "bcm_map_part.h"
-+
-+static DEFINE_SPINLOCK(board_lock);
-+
-+/* Typedefs. */
-+#if defined (NON_CONSECUTIVE_MAC)
-+// used to be the last octet. Now changed to the first 5 bits of the the forth octet
-+// to reduced the duplicated MAC addresses.
-+#define CHANGED_OCTET 3
-+#define SHIFT_BITS 3
-+#else
-+#define CHANGED_OCTET 1
-+#define SHIFT_BITS 0
-+#endif
-+
-+#if defined (WIRELESS)
-+#define SES_BTN_PRESSED 0x00000001
-+#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/
-+#define SES_LED_OFF 0
-+#define SES_LED_ON 1
-+#define SES_LED_BLINK 2
-+#endif
-+
-+typedef struct
-+{
-+ unsigned long ulId;
-+ char chInUse;
-+ char chReserved[3];
-+} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
-+
-+typedef struct
-+{
-+ unsigned long ulSdramSize;
-+ unsigned long ulPsiSize;
-+ unsigned long ulNumMacAddrs;
-+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-+ MAC_ADDR_INFO MacAddrs[1];
-+} NVRAM_INFO, *PNVRAM_INFO;
-+
-+typedef struct
-+{
-+ unsigned long eventmask;
-+} BOARD_IOC, *PBOARD_IOC;
-+
-+
-+/*Dyinggasp callback*/
-+typedef void (*cb_dgasp_t)(void *arg);
-+typedef struct _CB_DGASP__LIST
-+{
-+ struct list_head list;
-+ char name[IFNAMSIZ];
-+ cb_dgasp_t cb_dgasp_fn;
-+ void *context;
-+}CB_DGASP_LIST , *PCB_DGASP_LIST;
-+
-+
-+static LED_MAP_PAIR LedMapping[] =
-+{ // led name Initial state physical pin (ledMask)
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
-+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
-+};
-+
-+/* Externs. */
-+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
-+extern unsigned int nr_free_pages (void);
-+extern const char *get_system_type(void);
-+extern void kerSysFlashInit(void);
-+extern unsigned long get_nvram_start_addr(void);
-+extern unsigned long get_scratch_pad_start_addr(void);
-+extern unsigned long getMemorySize(void);
-+extern void __init boardLedInit(PLED_MAP_PAIR);
-+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
-+ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
-+
-+/* Prototypes. */
-+void __init InitNvramInfo( void );
-+static int board_open( struct inode *inode, struct file *filp );
-+static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg );
-+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos);
-+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait);
-+static int board_release(struct inode *inode, struct file *filp);
-+
-+static BOARD_IOC* borad_ioc_alloc(void);
-+static void borad_ioc_free(BOARD_IOC* board_ioc);
-+
-+/* DyingGasp function prototype */
-+static void __init kerSysDyingGaspMapIntr(void);
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs);
-+#else
-+static unsigned int kerSysDyingGaspIsr(void);
-+#endif
-+static void __init kerSysInitDyingGaspHandler( void );
-+static void __exit kerSysDeinitDyingGaspHandler( void );
-+/* -DyingGasp function prototype - */
-+
-+
-+#if defined (WIRELESS)
-+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs);
-+static void __init sesBtn_mapGpio(void);
-+static void __init sesBtn_mapIntr(int context);
-+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait);
-+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos);
-+static void __init sesLed_mapGpio(void);
-+static void sesLed_ctrl(int action);
-+static void __init ses_board_init(void);
-+static void __exit ses_board_deinit(void);
-+#endif
-+
-+static PNVRAM_INFO g_pNvramInfo = NULL;
-+static int g_ledInitialized = 0;
-+static wait_queue_head_t g_board_wait_queue;
-+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
-+
-+static int g_wakeup_monitor = 0;
-+static struct file *g_monitor_file = NULL;
-+static struct task_struct *g_monitor_task = NULL;
-+static unsigned int (*g_orig_fop_poll)
-+ (struct file *, struct poll_table_struct *) = NULL;
-+
-+static struct file_operations board_fops =
-+{
-+ open: board_open,
-+ ioctl: board_ioctl,
-+ poll: board_poll,
-+ read: board_read,
-+ release: board_release,
-+};
-+
-+uint32 board_major = 0;
-+
-+#if defined (WIRELESS)
-+static unsigned short sesBtn_irq = BP_NOT_DEFINED;
-+static unsigned short sesBtn_gpio = BP_NOT_DEFINED;
-+static unsigned short sesLed_gpio = BP_NOT_DEFINED;
-+#endif
-+
-+#if defined(MODULE)
-+int init_module(void)
-+{
-+ return( brcm_board_init() );
-+}
-+
-+void cleanup_module(void)
-+{
-+ if (MOD_IN_USE)
-+ printk("brcm flash: cleanup_module failed because module is in use\n");
-+ else
-+ brcm_board_cleanup();
-+}
-+#endif //MODULE
-+
-+
-+
-+static int __init brcm_board_init( void )
-+{
-+ typedef int (*BP_LED_FUNC) (unsigned short *);
-+ static struct BpLedInformation
-+ {
-+ BOARD_LED_NAME ledName;
-+ BP_LED_FUNC bpFunc;
-+ BP_LED_FUNC bpFuncFail;
-+ } bpLedInfo[] =
-+ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio},
-+ {kLedWireless, BpGetWirelessLedGpio, NULL},
-+ {kLedUsb, BpGetUsbLedGpio, NULL},
-+ {kLedHpna, BpGetHpnaLedGpio, NULL},
-+ {kLedWanData, BpGetWanDataLedGpio, NULL},
-+ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio},
-+ {kLedVoip, BpGetVoipLedGpio, NULL},
-+ {kLedSes, BpGetWirelessSesLedGpio, NULL},
-+ {kLedEnd, NULL, NULL}
-+ };
-+
-+ int ret;
-+
-+ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops );
-+ if (ret < 0)
-+ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR);
-+ else
-+ {
-+ PLED_MAP_PAIR pLedMap = LedMapping;
-+ unsigned short gpio;
-+ struct BpLedInformation *pInfo;
-+
-+ printk("brcmboard: brcm_board_init entry\n");
-+ board_major = BOARD_DRV_MAJOR;
-+ if (boot_loader_type == BOOT_CFE)
-+ InitNvramInfo();
-+
-+#if !defined(CONFIG_BCM96338)
-+ GPIO->GPIOMode &= ~(0x000F0000);
-+#endif
-+
-+ pLedMap[0].ledName = kLedSelfTest ;
-+ pLedMap[0].ledMask = GPIO_NUM_TO_MASK(0);
-+ pLedMap[0].ledActiveLow = 0;
-+
-+ pLedMap[1].ledName = kLedAdsl;
-+ pLedMap[1].ledMask = GPIO_NUM_TO_MASK(1);
-+ pLedMap[1].ledActiveLow = 0;
-+
-+ pLedMap[2].ledName = kLedLan ;
-+ pLedMap[2].ledMask = GPIO_NUM_TO_MASK(2);
-+ pLedMap[2].ledActiveLow = 0;
-+
-+ pLedMap[3].ledName = kLedVoip ;
-+ pLedMap[3].ledMask = GPIO_NUM_TO_MASK(3);
-+ pLedMap[3].ledActiveLow = 0;
-+
-+ pLedMap[4].ledName = kLedWireless ;
-+ pLedMap[4].ledMask = GPIO_NUM_TO_MASK(4);
-+ pLedMap[4].ledActiveLow = 0;
-+
-+ pLedMap[5].ledName = kLedEnd;
-+
-+#if 0
-+ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ )
-+ {
-+ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS )
-+ {
-+ pLedMap->ledName = pInfo->ledName;
-+ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio);
-+ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
-+ }
-+ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS )
-+ {
-+ pLedMap->ledName = pInfo->ledName;
-+ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio);
-+ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0;
-+ }
-+ if( pLedMap->ledName != kLedEnd )
-+ pLedMap++;
-+ }
-+#endif
-+ init_waitqueue_head(&g_board_wait_queue);
-+#if defined (WIRELESS)
-+ ses_board_init();
-+#endif
-+ kerSysInitDyingGaspHandler();
-+ kerSysDyingGaspMapIntr();
-+
-+ boardLedInit(LedMapping);
-+ g_ledInitialized = 1;
-+ }
-+
-+ return ret;
-+}
-+
-+void __init InitNvramInfo( void )
-+{
-+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-+ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs;
-+
-+ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX )
-+ {
-+ unsigned long ulNvramInfoSize =
-+ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs);
-+
-+ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL );
-+
-+ if( g_pNvramInfo )
-+ {
-+ unsigned long ulPsiSize;
-+ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS )
-+ ulPsiSize = NVRAM_PSI_DEFAULT;
-+ memset( g_pNvramInfo, 0x00, ulNvramInfoSize );
-+ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024;
-+ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs;
-+ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr,
-+ NVRAM_MAC_ADDRESS_LEN );
-+ g_pNvramInfo->ulSdramSize = getMemorySize();
-+ }
-+ else
-+ printk("ERROR - Could not allocate memory for NVRAM data\n");
-+ }
-+ else
-+ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n",
-+ ulNumMacAddrs);
-+}
-+
-+void __exit brcm_board_cleanup( void )
-+{
-+ printk("brcm_board_cleanup()\n");
-+
-+ if (board_major != -1)
-+ {
-+#if defined (WIRELESS)
-+ ses_board_deinit();
-+#endif
-+ kerSysDeinitDyingGaspHandler();
-+ unregister_chrdev(board_major, "board_ioctl");
-+ }
-+}
-+
-+static BOARD_IOC* borad_ioc_alloc(void)
-+{
-+ BOARD_IOC *board_ioc =NULL;
-+ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL );
-+ if(board_ioc)
-+ {
-+ memset(board_ioc, 0, sizeof(BOARD_IOC));
-+ }
-+ return board_ioc;
-+}
-+
-+static void borad_ioc_free(BOARD_IOC* board_ioc)
-+{
-+ if(board_ioc)
-+ {
-+ kfree(board_ioc);
-+ }
-+}
-+
-+
-+static int board_open( struct inode *inode, struct file *filp )
-+{
-+ filp->private_data = borad_ioc_alloc();
-+
-+ if (filp->private_data == NULL)
-+ return -ENOMEM;
-+
-+ return( 0 );
-+}
-+
-+static int board_release(struct inode *inode, struct file *filp)
-+{
-+ BOARD_IOC *board_ioc = filp->private_data;
-+
-+ wait_event_interruptible(g_board_wait_queue, 1);
-+ borad_ioc_free(board_ioc);
-+
-+ return( 0 );
-+}
-+
-+
-+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait)
-+{
-+ unsigned int mask = 0;
-+#if defined (WIRELESS)
-+ BOARD_IOC *board_ioc = filp->private_data;
-+#endif
-+
-+ poll_wait(filp, &g_board_wait_queue, wait);
-+#if defined (WIRELESS)
-+ if(board_ioc->eventmask & SES_EVENTS){
-+ mask |= sesBtn_poll(filp, wait);
-+ }
-+#endif
-+
-+ return mask;
-+}
-+
-+
-+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos)
-+{
-+#if defined (WIRELESS)
-+ BOARD_IOC *board_ioc = filp->private_data;
-+ if(board_ioc->eventmask & SES_EVENTS){
-+ return sesBtn_read(filp, buffer, count, ppos);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+//**************************************************************************************
-+// Utitlities for dump memory, free kernel pages, mips soft reset, etc.
-+//**************************************************************************************
-+
-+/***********************************************************************
-+ * Function Name: dumpaddr
-+ * Description : Display a hex dump of the specified address.
-+ ***********************************************************************/
-+void dumpaddr( unsigned char *pAddr, int nLen )
-+{
-+ static char szHexChars[] = "0123456789abcdef";
-+ char szLine[80];
-+ char *p = szLine;
-+ unsigned char ch, *q;
-+ int i, j;
-+ unsigned long ul;
-+
-+ while( nLen > 0 )
-+ {
-+ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr );
-+ p = szLine + strlen(szLine);
-+
-+ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long))
-+ {
-+ ul = *(unsigned long *) &pAddr[i];
-+ q = (unsigned char *) &ul;
-+ for( j = 0; j < sizeof(long); j++ )
-+ {
-+ *p++ = szHexChars[q[j] >> 4];
-+ *p++ = szHexChars[q[j] & 0x0f];
-+ *p++ = ' ';
-+ }
-+ }
-+
-+ for( j = 0; j < 16 - i; j++ )
-+ *p++ = ' ', *p++ = ' ', *p++ = ' ';
-+
-+ *p++ = ' ', *p++ = ' ', *p++ = ' ';
-+
-+ for( j = 0; j < i; j++ )
-+ {
-+ ch = pAddr[j];
-+ *p++ = (ch > ' ' && ch < '~') ? ch : '.';
-+ }
-+
-+ *p++ = '\0';
-+ printk( "%s\r\n", szLine );
-+
-+ pAddr += i;
-+ }
-+ printk( "\r\n" );
-+} /* dumpaddr */
-+
-+
-+void kerSysMipsSoftReset(void)
-+{
-+#if defined(CONFIG_BCM96348)
-+ if (PERF->RevID == 0x634800A1) {
-+ typedef void (*FNPTR) (void);
-+ FNPTR bootaddr = (FNPTR) FLASH_BASE;
-+ int i;
-+
-+ /* Disable interrupts. */
-+ //cli();
-+ spin_lock_irq(&board_lock);
-+
-+ /* Reset all blocks. */
-+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
-+ for( i = 0; i < 1000000; i++ )
-+ ;
-+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
-+ /* Jump to the power on address. */
-+ (*bootaddr) ();
-+ }
-+ else
-+ PERF->pll_control |= SOFT_RESET; // soft reset mips
-+#else
-+ PERF->pll_control |= SOFT_RESET; // soft reset mips
-+#endif
-+}
-+
-+
-+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
-+{
-+ int nRet = 0;
-+ PMAC_ADDR_INFO pMai = NULL;
-+ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
-+ PMAC_ADDR_INFO pMaiFreeId = NULL;
-+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
-+
-+ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
-+ * * à relire plusieurs fois */
-+ /* inv_xde */
-+ if (boot_loader_type == BOOT_CFE)
-+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
-+ NVRAM_MAC_ADDRESS_LEN );
-+ else {
-+ pucaMacAddr[0] = 0x00;
-+ pucaMacAddr[1] = 0x07;
-+ pucaMacAddr[2] = 0x3A;
-+ pucaMacAddr[3] = 0xFF;
-+ pucaMacAddr[4] = 0xFF;
-+ pucaMacAddr[5] = 0xFF;
-+ }
-+
-+ return nRet;
-+#if 0
-+ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs;
-+ i++, pMai++ )
-+ {
-+ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY )
-+ {
-+ /* This MAC address has been used by the caller in the past. */
-+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
-+ NVRAM_MAC_ADDRESS_LEN );
-+ shiftedIdx = i;
-+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
-+ pMai->chInUse = 1;
-+ pMaiFreeNoId = pMaiFreeId = NULL;
-+ break;
-+ }
-+ else
-+ if( pMai->chInUse == 0 )
-+ {
-+ if( pMai->ulId == 0 && pMaiFreeNoId == NULL )
-+ {
-+ /* This is an available MAC address that has never been
-+ * used.
-+ */
-+ pMaiFreeNoId = pMai;
-+ ulIdxNoId = i;
-+ }
-+ else
-+ if( pMai->ulId != 0 && pMaiFreeId == NULL )
-+ {
-+ /* This is an available MAC address that has been used
-+ * before. Use addresses that have never been used
-+ * first, before using this one.
-+ */
-+ pMaiFreeId = pMai;
-+ ulIdxId = i;
-+ }
-+ }
-+ }
-+
-+ if( pMaiFreeNoId || pMaiFreeId )
-+ {
-+ /* An available MAC address was found. */
-+ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN);
-+ if( pMaiFreeNoId )
-+ {
-+ shiftedIdx = ulIdxNoId;
-+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
-+ pMaiFreeNoId->ulId = ulId;
-+ pMaiFreeNoId->chInUse = 1;
-+ }
-+ else
-+ {
-+ shiftedIdx = ulIdxId;
-+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS);
-+ pMaiFreeId->ulId = ulId;
-+ pMaiFreeId->chInUse = 1;
-+ }
-+ }
-+ else
-+ if( i == g_pNvramInfo->ulNumMacAddrs )
-+ nRet = -EADDRNOTAVAIL;
-+
-+ return( nRet );
-+#endif
-+} /* kerSysGetMacAddr */
-+
-+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
-+{
-+ int nRet = -EINVAL;
-+ unsigned long ulIdx = 0;
-+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
-+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
-+
-+ // if overflow 255 (negitive), add 256 to have the correct index
-+ if (idx < 0)
-+ idx += 256;
-+ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
-+
-+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
-+ {
-+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
-+ if( pMai->chInUse == 1 )
-+ {
-+ pMai->chInUse = 0;
-+ nRet = 0;
-+ }
-+ }
-+
-+ return( nRet );
-+} /* kerSysReleaseMacAddr */
-+
-+int kerSysGetSdramSize( void )
-+{
-+ if (boot_loader_type == BOOT_CFE) {
-+ return( (int) g_pNvramInfo->ulSdramSize );
-+ }
-+ else {
-+ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
-+ return((int)getMemorySize() + 0x00040000);
-+ }
-+} /* kerSysGetSdramSize */
-+
-+
-+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-+{
-+ if (g_ledInitialized)
-+ boardLedCtrl(ledName, ledState);
-+}
-+
-+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
-+{
-+ int mask = (*g_orig_fop_poll) (f, t);
-+
-+ if( g_wakeup_monitor == 1 && g_monitor_file == f )
-+ {
-+ /* If g_wakeup_monitor is non-0, the user mode application needs to
-+ * return from a blocking select function. Return POLLPRI which will
-+ * cause the select to return with the exception descriptor set.
-+ */
-+ mask |= POLLPRI;
-+ g_wakeup_monitor = 0;
-+ }
-+
-+ return( mask );
-+}
-+
-+/* Put the user mode application that monitors link state on a run queue. */
-+void kerSysWakeupMonitorTask( void )
-+{
-+ g_wakeup_monitor = 1;
-+ if( g_monitor_task )
-+ wake_up_process( g_monitor_task );
-+}
-+
-+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-+int kerSysGetResetHold(void)
-+{
-+ unsigned short gpio;
-+
-+ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
-+ {
-+#if defined(CONFIG_BCM96338)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(CONFIG_BCM96345)
-+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(gpio);
-+ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(CONFIG_BCM96348)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+
-+ if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
-+ {
-+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
-+ gpio_reg = &GPIO->GPIOio_high;
-+ }
-+#endif
-+ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
-+ if(*gpio_reg & gpio_mask) //press down
-+ return RESET_BUTTON_UP;
-+ }
-+ return RESET_BUTTON_PRESSDOWN;
-+}
-+//<<JUNHON, 2004/09/15
-+
-+//********************************************************************************************
-+// misc. ioctl calls come to here. (flash, led, reset, kernel memory access, etc.)
-+//********************************************************************************************
-+static int board_ioctl( struct inode *inode, struct file *flip,
-+ unsigned int command, unsigned long arg )
-+{
-+ int ret = 0;
-+ BOARD_IOCTL_PARMS ctrlParms;
-+ unsigned char ucaMacAddr[NVRAM_MAC_ADDRESS_LEN];
-+ int allowedSize;
-+
-+ switch (command)
-+ {
-+ case BOARD_IOCTL_FLASH_INIT:
-+ // not used for now. kerSysBcmImageInit();
-+ break;
-+
-+
-+ case BOARD_IOCTL_FLASH_WRITE:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ NVRAM_DATA SaveNvramData;
-+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-+
-+ switch (ctrlParms.action)
-+ {
-+ case SCRATCH_PAD:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysScratchPadSet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case PERSISTENT:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysPersistentSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case NVRAM:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysNvRamSet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BCM_IMAGE_CFE:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > FLASH45_LENGTH_BOOT_ROM )
-+ {
-+ printk("Illegal CFE size [%d]. Size allowed: [%d]\n",
-+ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM);
-+ ret = -1;
-+ break;
-+ }
-+
-+ // save NVRAM data into a local structure
-+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
-+
-+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
-+
-+ // if nvram is not valid, restore the current nvram settings
-+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
-+ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
-+ {
-+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
-+ }
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+ case BCM_IMAGE_FS:
-+ if (boot_loader_type == BOOT_CFE) {
-+ allowedSize = (int) flash_get_total_size() - FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM;
-+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize)
-+ {
-+ printk("Illegal root file system size [%d]. Size allowed: [%d]\n",
-+ ctrlParms.strLen, ctrlParms.offset - allowedSize);
-+ ret = -1;
-+ break;
-+ }
-+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
-+ kerSysMipsSoftReset();
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BCM_IMAGE_KERNEL: // not used for now.
-+ if (boot_loader_type == BOOT_CFE) {
-+ allowedSize = (int) flash_get_total_size() - FLASH_RESERVED_AT_END - TAG_LEN - ctrlParms.offset;
-+
-+ printk("kernel size = [%d]. Allowed size = [%d]\n", ctrlParms.strLen, allowedSize);
-+
-+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize )
-+ {
-+ printk("Kernel size is over the limit by [%d] bytes\n",
-+ ctrlParms.strLen - allowedSize);
-+ ret = -1;
-+ break;
-+ }
-+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+ case BCM_IMAGE_WHOLE:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if(ctrlParms.strLen <= 0)
-+ {
-+ printk("Illegal flash image size [%d].\n", ctrlParms.strLen);
-+ ret = -1;
-+ break;
-+ }
-+
-+ // save NVRAM data into a local structure
-+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) );
-+
-+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen);
-+
-+ // if nvram is not valid, restore the current nvram settings
-+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS &&
-+ *(unsigned long *) pNvramData == NVRAM_DATA_ID )
-+ {
-+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0);
-+ }
-+
-+ kerSysMipsSoftReset();
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ default:
-+ ret = -EINVAL;
-+ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action);
-+ break;
-+ }
-+ ctrlParms.result = ret;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ }
-+ else
-+ ret = -EFAULT;
-+ break;
-+
-+ case BOARD_IOCTL_FLASH_READ:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ switch (ctrlParms.action)
-+ {
-+ case SCRATCH_PAD:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case PERSISTENT:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case NVRAM:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset);
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case FLASH_SIZE:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ret = kerSysFlashSizeGet();
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ default:
-+ ret = -EINVAL;
-+ printk("Not supported. invalid command %d\n", ctrlParms.action);
-+ break;
-+ }
-+ ctrlParms.result = ret;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ }
-+ else
-+ ret = -EFAULT;
-+ break;
-+
-+ case BOARD_IOCTL_GET_NR_PAGES:
-+ ctrlParms.result = nr_free_pages() + get_page_cache_size();
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ break;
-+
-+ case BOARD_IOCTL_DUMP_ADDR:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen );
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else
-+ ret = -EFAULT;
-+ break;
-+
-+ case BOARD_IOCTL_SET_MEMORY:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ unsigned long *pul = (unsigned long *) ctrlParms.string;
-+ unsigned short *pus = (unsigned short *) ctrlParms.string;
-+ unsigned char *puc = (unsigned char *) ctrlParms.string;
-+ switch( ctrlParms.strLen )
-+ {
-+ case 4:
-+ *pul = (unsigned long) ctrlParms.offset;
-+ break;
-+ case 2:
-+ *pus = (unsigned short) ctrlParms.offset;
-+ break;
-+ case 1:
-+ *puc = (unsigned char) ctrlParms.offset;
-+ break;
-+ }
-+ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) );
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else
-+ ret = -EFAULT;
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_MIPS_SOFT_RESET:
-+ kerSysMipsSoftReset();
-+ break;
-+
-+ case BOARD_IOCTL_LED_CTRL:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset);
-+ ret = 0;
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_ID:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg,
-+ sizeof(ctrlParms)) == 0)
-+ {
-+ if( ctrlParms.string )
-+ {
-+ char *p = (char *) get_system_type();
-+ if( strlen(p) + 1 < ctrlParms.strLen )
-+ ctrlParms.strLen = strlen(p) + 1;
-+ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen);
-+ }
-+
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
-+ sizeof(BOARD_IOCTL_PARMS));
-+ }
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_MAC_ADDRESS:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr,
-+ ctrlParms.offset );
-+
-+ if( ctrlParms.result == 0 )
-+ {
-+ __copy_to_user(ctrlParms.string, ucaMacAddr,
-+ sizeof(ucaMacAddr));
-+ }
-+
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
-+ sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else
-+ ret = -EFAULT;
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_RELEASE_MAC_ADDRESS:
-+ if (boot_loader_type == BOOT_CFE) {
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \
-+ NVRAM_MAC_ADDRESS_LEN) == 0)
-+ {
-+ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr );
-+ }
-+ else
-+ {
-+ ctrlParms.result = -EACCES;
-+ }
-+
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
-+ sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else
-+ ret = -EFAULT;
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_PSI_SIZE:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_SDRAM_SIZE:
-+ if (boot_loader_type == BOOT_CFE) {
-+ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else {
-+ printk("RedBoot : not supported\n");
-+ return(-EINVAL);
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0)
-+ {
-+ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN);
-+ ctrlParms.result = 0;
-+
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms,
-+ sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else
-+ ret = -EFAULT;
-+ break;
-+
-+ case BOARD_IOCTL_GET_CHIP_ID:
-+ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ break;
-+
-+ case BOARD_IOCTL_GET_NUM_ENET: {
-+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
-+ int i, numeth = 0;
-+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
-+ for( i = 0; i < BP_MAX_ENET_MACS; i++) {
-+ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) {
-+ numeth++;
-+ }
-+ }
-+ ctrlParms.result = numeth;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+ }
-+
-+ case BOARD_IOCTL_GET_CFE_VER:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET);
-+ if (ctrlParms.strLen < CFE_VERSION_SIZE) {
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = -EFAULT;
-+ }
-+ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ else {
-+ ctrlParms.result = 1;
-+ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE);
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ }
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_ENET_CFG:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS];
-+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) {
-+ if (ctrlParms.strLen == sizeof(EnetInfos)) {
-+ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos));
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ } else
-+ ret = -EFAULT;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-+ case BOARD_IOCTL_GET_RESETHOLD:
-+ ctrlParms.result = kerSysGetResetHold();
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ break;
-+//>>JUNHON, 2004/09/15
-+
-+
-+#if defined (WIRELESS)
-+ case BOARD_IOCTL_GET_WLAN_ANT_INUSE:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ unsigned short antInUse = 0;
-+ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) {
-+ if (ctrlParms.strLen == sizeof(antInUse)) {
-+ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse));
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ } else
-+ ret = -EFAULT;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+#endif
-+ case BOARD_IOCTL_SET_TRIGGER_EVENT:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
-+ ctrlParms.result = -EFAULT;
-+ ret = -EFAULT;
-+ if (ctrlParms.strLen == sizeof(unsigned long)) {
-+ board_ioc->eventmask |= *((int*)ctrlParms.string);
-+#if defined (WIRELESS)
-+ if((board_ioc->eventmask & SES_EVENTS)) {
-+ if(sesBtn_irq != BP_NOT_DEFINED) {
-+ BcmHalInterruptEnable(sesBtn_irq);
-+ ctrlParms.result = 0;
-+ ret = 0;
-+ }
-+ }
-+#endif
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ }
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_GET_TRIGGER_EVENT:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
-+ if (ctrlParms.strLen == sizeof(unsigned long)) {
-+ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long));
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ } else
-+ ret = -EFAULT;
-+
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_UNSET_TRIGGER_EVENT:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ if (ctrlParms.strLen == sizeof(unsigned long)) {
-+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data;
-+ board_ioc->eventmask &= (~(*((int*)ctrlParms.string)));
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ } else
-+ ret = -EFAULT;
-+
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+#if defined (WIRELESS)
-+ case BOARD_IOCTL_SET_SES_LED:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ if (ctrlParms.strLen == sizeof(int)) {
-+ sesLed_ctrl(*(int*)ctrlParms.string);
-+ ctrlParms.result = 0;
-+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS));
-+ ret = 0;
-+ } else
-+ ret = -EFAULT;
-+
-+ break;
-+ }
-+ else {
-+ ret = -EFAULT;
-+ }
-+ break;
-+#endif
-+
-+ case BOARD_IOCTL_SET_MONITOR_FD:
-+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) {
-+ int fput_needed = 0;
-+
-+ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed );
-+ if( g_monitor_file ) {
-+ /* Hook this file descriptor's poll function in order to set
-+ * the exception descriptor when there is a change in link
-+ * state.
-+ */
-+ g_monitor_task = current;
-+ g_orig_fop_poll = kerSysMonitorPollHook;
-+ /*g_orig_fop_poll = g_monitor_file->f_op->poll;
-+ g_monitor_file->f_op->poll = kerSysMonitorPollHook;*/
-+ }
-+ }
-+ break;
-+
-+ case BOARD_IOCTL_WAKEUP_MONITOR_TASK:
-+ kerSysWakeupMonitorTask();
-+ break;
-+
-+ default:
-+ ret = -EINVAL;
-+ ctrlParms.result = 0;
-+ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command));
-+ break;
-+
-+ } /* switch */
-+
-+ return (ret);
-+
-+} /* board_ioctl */
-+
-+/***************************************************************************
-+ * SES Button ISR/GPIO/LED functions.
-+ ***************************************************************************/
-+#if defined (WIRELESS)
-+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs)
-+{
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+
-+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
-+ {
-+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
-+ gpio_reg = &GPIO->GPIOio_high;
-+ }
-+#endif
-+
-+ if (!(*gpio_reg & gpio_mask)){
-+ wake_up_interruptible(&g_board_wait_queue);
-+ return IRQ_RETVAL(1);
-+ } else {
-+ return IRQ_RETVAL(0);
-+ }
-+}
-+
-+static void __init sesBtn_mapGpio()
-+{
-+ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS )
-+ {
-+ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio);
-+ }
-+}
-+
-+static void __init sesBtn_mapIntr(int context)
-+{
-+ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS )
-+ {
-+ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq);
-+ }
-+ else
-+ return;
-+
-+ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0;
-+
-+ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) {
-+ printk("SES: Interrupt mapping failed\n");
-+ }
-+ BcmHalInterruptEnable(sesBtn_irq);
-+}
-+
-+
-+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait)
-+{
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+
-+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
-+ {
-+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
-+ gpio_reg = &GPIO->GPIOio_high;
-+ }
-+#endif
-+
-+ if (!(*gpio_reg & gpio_mask)){
-+ return POLLIN;
-+ }
-+ return 0;
-+}
-+
-+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
-+{
-+ volatile unsigned int event=0;
-+ ssize_t ret=0;
-+
-+#if defined(_BCM96338_) || defined (CONFIG_BCM96338)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96345_) || defined (CONFIG_BCM96345)
-+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned short *gpio_reg = &GPIO->GPIOio;
-+#endif
-+#if defined(_BCM96348_) || defined (CONFIG_BCM96348)
-+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio);
-+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-+
-+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 )
-+ {
-+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio);
-+ gpio_reg = &GPIO->GPIOio_high;
-+ }
-+#endif
-+
-+ if(*gpio_reg & gpio_mask){
-+ BcmHalInterruptEnable(sesBtn_irq);
-+ return ret;
-+ }
-+ event = SES_EVENTS;
-+ __copy_to_user((char*)buffer, (char*)&event, sizeof(event));
-+ BcmHalInterruptEnable(sesBtn_irq);
-+ count -= sizeof(event);
-+ buffer += sizeof(event);
-+ ret += sizeof(event);
-+ return ret;
-+}
-+
-+static void __init sesLed_mapGpio()
-+{
-+ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS )
-+ {
-+ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio);
-+ }
-+}
-+
-+static void sesLed_ctrl(int action)
-+{
-+
-+ //char status = ((action >> 8) & 0xff); /* extract status */
-+ //char event = ((action >> 16) & 0xff); /* extract event */
-+ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */
-+
-+ BOARD_LED_STATE led;
-+
-+ if(sesLed_gpio == BP_NOT_DEFINED)
-+ return;
-+
-+ action &= 0xff; /* extract led */
-+
-+ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status);
-+
-+ switch (action)
-+ {
-+ case SES_LED_ON:
-+ //printk("SES: led on\n");
-+ led = kLedStateOn;
-+ break;
-+ case SES_LED_BLINK:
-+ //printk("SES: led blink\n");
-+ led = kLedStateSlowBlinkContinues;
-+ break;
-+ case SES_LED_OFF:
-+ default:
-+ //printk("SES: led off\n");
-+ led = kLedStateOff;
-+ }
-+
-+ kerSysLedCtrl(kLedSes, led);
-+}
-+
-+static void __init ses_board_init()
-+{
-+ sesBtn_mapGpio();
-+ sesBtn_mapIntr(0);
-+ sesLed_mapGpio();
-+}
-+static void __exit ses_board_deinit()
-+{
-+ if(sesBtn_irq)
-+ BcmHalInterruptDisable(sesBtn_irq);
-+}
-+#endif
-+
-+/***************************************************************************
-+ * Dying gasp ISR and functions.
-+ ***************************************************************************/
-+#define KERSYS_DBG printk
-+
-+#if defined(CONFIG_BCM96345)
-+#define CYCLE_PER_US 70
-+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-+/* The BCM6348 cycles per microsecond is really variable since the BCM6348
-+ * MIPS speed can vary depending on the PLL settings. However, an appoximate
-+ * value of 120 will still work OK for the test being done.
-+ */
-+#define CYCLE_PER_US 120
-+#endif
-+#define DG_GLITCH_TO (100*CYCLE_PER_US)
-+
-+static void __init kerSysDyingGaspMapIntr()
-+{
-+ unsigned long ulIntr;
-+
-+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
-+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
-+ BcmHalInterruptEnable( INTERRUPT_ID_DG );
-+ }
-+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
-+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-+ ulIntr += INTERRUPT_ID_EXTERNAL_0;
-+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
-+ BcmHalInterruptEnable( ulIntr );
-+ }
-+#endif
-+
-+}
-+
-+void kerSysSetWdTimer(ulong timeUs)
-+{
-+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
-+ TIMER->WatchDogCtl = 0xFF00;
-+ TIMER->WatchDogCtl = 0x00FF;
-+}
-+
-+ulong kerSysGetCycleCount(void)
-+{
-+ ulong cnt;
-+#ifdef _WIN32_WCE
-+ cnt = 0;
-+#else
-+ __asm volatile("mfc0 %0, $9":"=d"(cnt));
-+#endif
-+ return(cnt);
-+}
-+
-+static Bool kerSysDyingGaspCheckPowerLoss(void)
-+{
-+ ulong clk0;
-+ ulong ulIntr;
-+
-+ ulIntr = 0;
-+ clk0 = kerSysGetCycleCount();
-+
-+ UART->Data = 'D';
-+ UART->Data = '%';
-+ UART->Data = 'G';
-+
-+#if defined(CONFIG_BCM96345)
-+ BpGetAdslDyingGaspExtIntr( &ulIntr );
-+
-+ do {
-+ ulong clk1;
-+
-+ clk1 = kerSysGetCycleCount(); /* time cleared */
-+ /* wait a little to get new reading */
-+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-+ ;
-+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-+
-+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
-+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
-+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-+ return 0;
-+ }
-+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
-+ do {
-+ ulong clk1;
-+
-+ clk1 = kerSysGetCycleCount(); /* time cleared */
-+ /* wait a little to get new reading */
-+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-+ ;
-+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-+
-+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
-+ BcmHalInterruptEnable( INTERRUPT_ID_DG );
-+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-+ return 0;
-+ }
-+#endif
-+ return 1;
-+}
-+
-+static void kerSysDyingGaspShutdown( void )
-+{
-+ kerSysSetWdTimer(1000000);
-+#if defined(CONFIG_BCM96345)
-+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
-+#elif defined(CONFIG_BCM96348)
-+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
-+#endif
-+}
-+
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs)
-+#else
-+static unsigned int kerSysDyingGaspIsr(void)
-+#endif
-+{
-+ struct list_head *pos;
-+ CB_DGASP_LIST *tmp, *dsl = NULL;
-+
-+ if (kerSysDyingGaspCheckPowerLoss()) {
-+
-+ /* first to turn off everything other than dsl */
-+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
-+ tmp = list_entry(pos, CB_DGASP_LIST, list);
-+ if(strncmp(tmp->name, "dsl", 3)) {
-+ (tmp->cb_dgasp_fn)(tmp->context);
-+ }else {
-+ dsl = tmp;
-+ }
-+ }
-+
-+ /* now send dgasp */
-+ if(dsl)
-+ (dsl->cb_dgasp_fn)(dsl->context);
-+
-+ /* reset and shutdown system */
-+ kerSysDyingGaspShutdown();
-+ }
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-+return( IRQ_HANDLED );
-+#else
-+ return( 1 );
-+#endif
-+}
-+
-+static void __init kerSysInitDyingGaspHandler( void )
-+{
-+ CB_DGASP_LIST *new_node;
-+
-+ if( g_cb_dgasp_list_head != NULL) {
-+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
-+ return;
-+ }
-+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
-+ INIT_LIST_HEAD(&new_node->list);
-+ g_cb_dgasp_list_head = new_node;
-+
-+} /* kerSysInitDyingGaspHandler */
-+
-+static void __exit kerSysDeinitDyingGaspHandler( void )
-+{
-+ struct list_head *pos;
-+ CB_DGASP_LIST *tmp;
-+
-+ if(g_cb_dgasp_list_head == NULL)
-+ return;
-+
-+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
-+ tmp = list_entry(pos, CB_DGASP_LIST, list);
-+ list_del(pos);
-+ kfree(tmp);
-+ }
-+
-+ kfree(g_cb_dgasp_list_head);
-+ g_cb_dgasp_list_head = NULL;
-+
-+} /* kerSysDeinitDyingGaspHandler */
-+
-+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
-+{
-+ CB_DGASP_LIST *new_node;
-+
-+ if( g_cb_dgasp_list_head == NULL) {
-+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
-+ return;
-+ }
-+
-+ if( devname == NULL || cbfn == NULL ) {
-+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
-+ return;
-+ }
-+
-+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
-+ INIT_LIST_HEAD(&new_node->list);
-+ strncpy(new_node->name, devname, IFNAMSIZ);
-+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
-+ new_node->context = context;
-+ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
-+
-+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
-+
-+} /* kerSysRegisterDyingGaspHandler */
-+
-+void kerSysDeregisterDyingGaspHandler(char *devname)
-+{
-+ struct list_head *pos;
-+ CB_DGASP_LIST *tmp;
-+
-+ if(g_cb_dgasp_list_head == NULL) {
-+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
-+ return;
-+ }
-+
-+ if(devname == NULL) {
-+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
-+ return;
-+ }
-+
-+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
-+
-+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
-+ tmp = list_entry(pos, CB_DGASP_LIST, list);
-+ if(!strcmp(tmp->name, devname)) {
-+ list_del(pos);
-+ kfree(tmp);
-+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
-+ return;
-+ }
-+ }
-+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
-+
-+} /* kerSysDeregisterDyingGaspHandler */
-+
-+/***************************************************************************
-+ * MACRO to call driver initialization and cleanup functions.
-+ ***************************************************************************/
-+module_init( brcm_board_init );
-+module_exit( brcm_board_cleanup );
-+
-+EXPORT_SYMBOL(kerSysNvRamGet);
-+EXPORT_SYMBOL(dumpaddr);
-+EXPORT_SYMBOL(kerSysGetMacAddress);
-+EXPORT_SYMBOL(kerSysReleaseMacAddress);
-+EXPORT_SYMBOL(kerSysGetSdramSize);
-+EXPORT_SYMBOL(kerSysLedCtrl);
-+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-+EXPORT_SYMBOL(kerSysGetResetHold);
-+//>>JUNHON, 2004/09/15
-+EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
-+EXPORT_SYMBOL(BpGetBoardIds);
-+EXPORT_SYMBOL(BpGetSdramSize);
-+EXPORT_SYMBOL(BpGetPsiSize);
-+EXPORT_SYMBOL(BpGetEthernetMacInfo);
-+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
-+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
-+EXPORT_SYMBOL(BpGetVoipResetGpio);
-+EXPORT_SYMBOL(BpGetVoipIntrGpio);
-+EXPORT_SYMBOL(BpGetPcmciaResetGpio);
-+EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
-+EXPORT_SYMBOL(BpGetAdslLedGpio);
-+EXPORT_SYMBOL(BpGetAdslFailLedGpio);
-+EXPORT_SYMBOL(BpGetWirelessLedGpio);
-+EXPORT_SYMBOL(BpGetUsbLedGpio);
-+EXPORT_SYMBOL(BpGetHpnaLedGpio);
-+EXPORT_SYMBOL(BpGetWanDataLedGpio);
-+EXPORT_SYMBOL(BpGetPppLedGpio);
-+EXPORT_SYMBOL(BpGetPppFailLedGpio);
-+EXPORT_SYMBOL(BpGetVoipLedGpio);
-+EXPORT_SYMBOL(BpGetWirelessExtIntr);
-+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
-+EXPORT_SYMBOL(BpGetVoipExtIntr);
-+EXPORT_SYMBOL(BpGetHpnaExtIntr);
-+EXPORT_SYMBOL(BpGetHpnaChipSelect);
-+EXPORT_SYMBOL(BpGetVoipChipSelect);
-+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
-+EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
-+EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
-+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
-+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
-+EXPORT_SYMBOL(kerSysGetCycleCount);
-+EXPORT_SYMBOL(kerSysSetWdTimer);
-+EXPORT_SYMBOL(kerSysWakeupMonitorTask);
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,2391 @@
-+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.c
-+ *
-+ * Description: This file contains the implementation for the BCM63xx board
-+ * parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
-+
-+/* Includes. */
-+#include "boardparms.h"
-+
-+/* Defines. */
-+
-+/* Default psi size in K bytes */
-+#define BP_PSI_DEFAULT_SIZE 24
-+
-+/* Typedefs */
-+typedef struct boardparameters
-+{
-+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
-+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
-+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
-+ unsigned short usSdramSize; /* SDRAM size and type */
-+ unsigned short usPsiSize; /* persistent storage in K bytes */
-+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
-+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
-+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
-+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
-+ unsigned short usGpioUartRts; /* GPIO pin or not defined */
-+ unsigned short usGpioUartCts; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
-+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
-+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
-+ unsigned short usExtIntrWireless; /* ext intr or not defined */
-+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
-+ unsigned short usExtIntrHpna; /* ext intr or not defined */
-+ unsigned short usCsHpna; /* chip select not defined */
-+ unsigned short usAntInUseWireless; /* antenna in use or not defined */
-+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
-+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
-+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
-+} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-+
-+/* Variables */
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+static BOARD_PARAMETERS g_bcm96338sv =
-+{
-+ "96338SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static BOARD_PARAMETERS g_bcm96338l2m8m =
-+{
-+ "96338L-2M-8M", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-+#endif
-+
-+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-+static BOARD_PARAMETERS g_bcm96345r =
-+{
-+ "96345R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw2 =
-+{
-+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
-+ * Reset or RTS.
-+ */
-+ "96345GW2", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_GPIO_0_AH, /* usGpioPhySpiSck */
-+ BP_GPIO_4_AH, /* usGpioPhySpiSs */
-+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
-+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_GPIO, /* usConfigType */
-+ BP_ENET_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_GPIO_13_AH, /* usGpioUartRts */
-+ BP_GPIO_9_AH, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw =
-+{
-+ "96345GW", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_GPIO_10_AH, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_EXT_INTR_3, /* usExtIntrHpna */
-+ BP_CS_1, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96335r =
-+{
-+ "96335R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_9_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_8_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_9_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345r0 =
-+{
-+ "96345R0", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345rs =
-+{
-+ "96345RS", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
-+ &g_bcm96345rs, 0};
-+#endif
-+
-+#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-+
-+static BOARD_PARAMETERS g_bcm96348r =
-+{
-+ "96348R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348lv =
-+{
-+ "96348LV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x02, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_GPIO_5_AL, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw =
-+{
-+ "96348GW", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_10 =
-+{
-+ "96348GW-10", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw_11 =
-+{
-+ "96348GW-11", /* szBoardId */
-+ {{BP_ENET_NO_PHY}, /* ucPhyType */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348sv =
-+{
-+ "96348SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x1f, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-+{
-+ "96348GW-DualDSP", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_UNEQUIPPED, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_DSP, /* ucDspType */
-+ 0x01, /* ucDspAddress */
-+ BP_EXT_INTR_3, /* usExtIntrVoip */
-+ BP_UNEQUIPPED , /* usGpioVoipReset */
-+ BP_GPIO_35_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_3}}, /* usCsVoip */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcmCustom_01 =
-+{
-+ "BCMCUST_01", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_36_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AL, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
-+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
-+ &g_bcmCustom_01, 0};
-+#endif
-+
-+static PBOARD_PARAMETERS g_pCurrentBp = 0;
-+
-+/**************************************************************************
-+ * Name : bpstrcmp
-+ *
-+ * Description: String compare for this file so it does not depend on an OS.
-+ * (Linux kernel and CFE share this source file.)
-+ *
-+ * Parameters : [IN] dest - destination string
-+ * [IN] src - source string
-+ *
-+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
-+ ***************************************************************************/
-+static int bpstrcmp(const char *dest,const char *src);
-+static int bpstrcmp(const char *dest,const char *src)
-+{
-+ while (*src && *dest)
-+ {
-+ if (*dest < *src) return -1;
-+ if (*dest > *src) return 1;
-+ dest++;
-+ src++;
-+ }
-+
-+ if (*dest && !*src) return 1;
-+ if (!*dest && *src) return -1;
-+ return 0;
-+} /* bpstrcmp */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipDspConfig
-+ *
-+ * Description: Gets the DSP configuration from the board parameter
-+ * structure for a given DSP index.
-+ *
-+ * Parameters : [IN] dspNum - DSP index (number)
-+ *
-+ * Returns : Pointer to DSP configuration block if found/valid, NULL
-+ * otherwise.
-+ ***************************************************************************/
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-+{
-+ VOIP_DSP_INFO *pDspConfig = 0;
-+ int i;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
-+ {
-+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
-+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
-+ {
-+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ return pDspConfig;
-+}
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId )
-+{
-+ int nRet = BP_BOARD_ID_NOT_FOUND;
-+ PBOARD_PARAMETERS *ppBp;
-+
-+ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
-+ {
-+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
-+ {
-+ g_pCurrentBp = *ppBp;
-+ nRet = BP_SUCCESS;
-+ break;
-+ }
-+ }
-+
-+ return( nRet );
-+} /* BpSetBoardId */
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-+{
-+ PBOARD_PARAMETERS *ppBp;
-+ int i;
-+ char *src;
-+ char *dest;
-+
-+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
-+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
-+ {
-+ dest = pszBoardIds;
-+ src = (*ppBp)->szBoardId;
-+ while( *src )
-+ *dest++ = *src++;
-+ *dest = '\0';
-+ }
-+
-+ return( i );
-+} /* BpGetBoardIds */
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-+{
-+ int i, nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ {
-+ if( i < BP_MAX_ENET_MACS )
-+ {
-+ unsigned char *src = (unsigned char *)
-+ &g_pCurrentBp->EnetMacInfos[i];
-+ unsigned char *dest = (unsigned char *) pEnetInfos;
-+ int len = sizeof(ETHERNET_MAC_INFO);
-+ while( len-- )
-+ *dest++ = *src++;
-+ }
-+ else
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+ }
-+
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetEthernetMacInfo */
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulSdramSize = g_pCurrentBp->usSdramSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulSdramSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetSdramSize */
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulPsiSize = g_pCurrentBp->usPsiSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulPsiSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPsiSize */
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
-+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-+
-+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusInner = *pusOuter = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetRj11InnerOuterPairGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-+
-+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPressAndHoldResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipReset;
-+
-+ if( *pusValue != BP_NOT_DEFINED ||
-+ *pusValue == BP_UNEQUIPPED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipIntr;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipIntrGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-+
-+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPcmciaResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusRts = g_pCurrentBp->usGpioUartRts;
-+ *pusCts = g_pCurrentBp->usGpioUartCts;
-+
-+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusRts = *pusCts = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUartRtsCtsGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdsl;
-+
-+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-+
-+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWireless;
-+
-+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usAntInUseWireless;
-+
-+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessAntInUse */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-+
-+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessSesBtnGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-+
-+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-+
-+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedUsb;
-+
-+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUsbLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedHpna;
-+
-+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWanData;
-+
-+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWanDataLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPpp;
-+
-+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPppFail;
-+
-+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-+
-+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderPowerOn */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-+
-+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderAlarmLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-+
-+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderResetCfgLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlStop;
-+
-+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderStopLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ *
-+ * Note : The VoIP structure would allow for having one LED per DSP
-+ * however, the board initialization function assumes only one
-+ * LED per functionality (ie one LED for VoIP). Therefore in
-+ * order to keep this tidy and simple we do not make usage of the
-+ * one-LED-per-DSP function. Instead, we assume that the LED for
-+ * VoIP is unique and associated with DSP 0 (always present on
-+ * any VoIP platform). If changing this to a LED-per-DSP function
-+ * then one need to update the board initialization driver in
-+ * bcmdrivers\opensource\char\board\bcm963xx\impl1
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioLedVoip;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrWireless;
-+
-+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-+
-+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslDyingGaspExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usExtIntrVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrHpna;
-+
-+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usCsHpna;
-+
-+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaChipSelect */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usCsVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipChipSelect */
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,758 @@
-+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.h
-+ *
-+ * Description: This file contains definitions and function prototypes for
-+ * the BCM63xx board parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
-+
-+#if !defined(_BOARDPARMS_H)
-+#define _BOARDPARMS_H
-+
-+/* Return codes. */
-+#define BP_SUCCESS 0
-+#define BP_BOARD_ID_NOT_FOUND 1
-+#define BP_VALUE_NOT_DEFINED 2
-+#define BP_BOARD_ID_NOT_SET 3
-+
-+/* Values for BpGetSdramSize. */
-+#define BP_MEMORY_8MB_1_CHIP 0
-+#define BP_MEMORY_16MB_1_CHIP 1
-+#define BP_MEMORY_32MB_1_CHIP 2
-+#define BP_MEMORY_64MB_2_CHIP 3
-+#define BP_MEMORY_32MB_2_CHIP 4
-+#define BP_MEMORY_16MB_2_CHIP 5
-+
-+/* Values for EthernetMacInfo PhyType. */
-+#define BP_ENET_NO_PHY 0
-+#define BP_ENET_INTERNAL_PHY 1
-+#define BP_ENET_EXTERNAL_PHY 2
-+#define BP_ENET_EXTERNAL_SWITCH 3
-+
-+/* Values for EthernetMacInfo Configuration type. */
-+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
-+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
-+
-+/* Values for EthernetMacInfo Reverse MII. */
-+#define BP_ENET_NO_REVERSE_MII 0
-+#define BP_ENET_REVERSE_MII 1
-+
-+/* Values for VoIPDSPInfo DSPType. */
-+#define BP_VOIP_NO_DSP 0
-+#define BP_VOIP_DSP 1
-+
-+
-+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-+#define BP_ACTIVE_MASK 0x8000
-+#define BP_ACTIVE_HIGH 0x0000
-+#define BP_ACTIVE_LOW 0x8000
-+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
-+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
-+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
-+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
-+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
-+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
-+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
-+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
-+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
-+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
-+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
-+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
-+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
-+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
-+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
-+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
-+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
-+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
-+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
-+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
-+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
-+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
-+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
-+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
-+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
-+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
-+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
-+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
-+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
-+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
-+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
-+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
-+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
-+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
-+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
-+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
-+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
-+
-+/* Values for external interrupt assignments. */
-+#define BP_EXT_INTR_0 0
-+#define BP_EXT_INTR_1 1
-+#define BP_EXT_INTR_2 2
-+#define BP_EXT_INTR_3 3
-+
-+/* Values for chip select assignments. */
-+#define BP_CS_0 0
-+#define BP_CS_1 1
-+#define BP_CS_2 2
-+#define BP_CS_3 3
-+
-+/* Value for GPIO and external interrupt fields that are not used. */
-+#define BP_NOT_DEFINED 0xffff
-+#define BP_HW_DEFINED 0xfff0
-+#define BP_UNEQUIPPED 0xfff1
-+
-+/* Maximum size of the board id string. */
-+#define BP_BOARD_ID_LEN 16
-+
-+/* Maximum number of Ethernet MACs. */
-+#define BP_MAX_ENET_MACS 2
-+
-+/* Maximum number of VoIP DSPs. */
-+#define BP_MAX_VOIP_DSP 2
-+
-+/* Wireless Antenna Settings. */
-+#define BP_WLAN_ANT_MAIN 0
-+#define BP_WLAN_ANT_AUX 1
-+#define BP_WLAN_ANT_BOTH 3
-+
-+#if !defined(__ASSEMBLER__)
-+
-+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
-+ * then the other fields are not valid.
-+ */
-+typedef struct EthernetMacInfo
-+{
-+ unsigned char ucPhyType; /* BP_ENET_xxx */
-+ unsigned char ucPhyAddress; /* 0 to 31 */
-+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
-+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
-+ unsigned short numSwitchPorts; /* Number of PHY ports */
-+ unsigned short usConfigType; /* Configuration type */
-+ unsigned short usReverseMii; /* Reverse MII */
-+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-+
-+
-+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
-+ * then the other fields are not valid.
-+ */
-+typedef struct VoIPDspInfo
-+{
-+ unsigned char ucDspType;
-+ unsigned char ucDspAddress;
-+ unsigned short usExtIntrVoip;
-+ unsigned short usGpioVoipReset;
-+ unsigned short usGpioVoipIntr;
-+ unsigned short usGpioLedVoip;
-+ unsigned short usCsVoip;
-+
-+} VOIP_DSP_INFO;
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId );
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize );
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize );
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter );
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-+
-+#endif /* __ASSEMBLER__ */
-+
-+#endif /* _BOARDPARMS_H */
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,692 @@
-+/************************************************************************/
-+/* */
-+/* AMD CFI Enabled Flash Memory Drivers */
-+/* File name: CFIFLASH.C */
-+/* Revision: 1.0 5/07/98 */
-+/* */
-+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
-+/* This software is unpublished and contains the trade secrets and */
-+/* confidential proprietary information of AMD. Unless otherwise */
-+/* provided in the Software Agreement associated herewith, it is */
-+/* licensed in confidence "AS IS" and is not to be reproduced in whole */
-+/* or part by any means except for backup. Use, duplication, or */
-+/* disclosure by the Government is subject to the restrictions in */
-+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
-+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
-+/* Software owned by */
-+/* Advanced Micro Devices, Inc., */
-+/* One AMD Place, */
-+/* P.O. Box 3453 */
-+/* Sunnyvale, CA 94088-3453. */
-+/************************************************************************/
-+/* This software constitutes a basic shell of source code for */
-+/* programming all AMD Flash components. AMD */
-+/* will not be responsible for misuse or illegal use of this */
-+/* software for devices not supported herein. AMD is providing */
-+/* this source code "AS IS" and will not be responsible for */
-+/* issues arising from incorrect user implementation of the */
-+/* source code herein. It is the user's responsibility to */
-+/* properly design-in this source code. */
-+/* */
-+/************************************************************************/
-+#ifdef _CFE_
-+#include "lib_types.h"
-+#include "lib_printf.h"
-+#include "lib_string.h"
-+#include "cfe_timer.h"
-+#define printk printf
-+#else // linux
-+#include <linux/param.h>
-+#include <linux/sched.h>
-+#include <linux/timer.h>
-+#endif
-+
-+#include "cfiflash.h"
-+
-+static int flash_wait(WORD sector, int offset, UINT16 data);
-+static UINT16 flash_get_device_id(void);
-+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily);
-+static int flash_write(WORD sector, int offset, byte *buf, int nbytes);
-+static void flash_command(int command, WORD sector, int offset, UINT16 data);
-+
-+/*********************************************************************/
-+/* 'meminfo' should be a pointer, but most C compilers will not */
-+/* allocate static storage for a pointer without calling */
-+/* non-portable functions such as 'new'. We also want to avoid */
-+/* the overhead of passing this pointer for every driver call. */
-+/* Systems with limited heap space will need to do this. */
-+/*********************************************************************/
-+struct flashinfo meminfo; /* Flash information structure */
-+static int flashFamily = FLASH_UNDEFINED;
-+static int totalSize = 0;
-+static struct cfi_query query;
-+
-+static UINT16 cfi_data_struct_29W160[] = {
-+ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000,
-+ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004,
-+ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015,
-+ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040,
-+ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080,
-+ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff,
-+ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001,
-+ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
-+};
-+
-+
-+/*********************************************************************/
-+/* Init_flash is used to build a sector table from the information */
-+/* provided through the CFI query. This information is translated */
-+/* from erase_block information to base:offset information for each */
-+/* individual sector. This information is then stored in the meminfo */
-+/* structure, and used throughout the driver to access sector */
-+/* information. */
-+/* */
-+/* This is more efficient than deriving the sector base:offset */
-+/* information every time the memory map switches (since on the */
-+/* development platform can only map 64k at a time). If the entire */
-+/* flash memory array can be mapped in, then the addition static */
-+/* allocation for the meminfo structure can be eliminated, but the */
-+/* drivers will have to be re-written. */
-+/* */
-+/* The meminfo struct occupies 653 bytes of heap space, depending */
-+/* on the value of the define MAXSECTORS. Adjust to suit */
-+/* application */
-+/*********************************************************************/
-+byte flash_init(void)
-+{
-+ int i=0, j=0, count=0;
-+ int basecount=0L;
-+ UINT16 device_id;
-+ int flipCFIGeometry = FALSE;
-+
-+ /* First, assume
-+ * a single 8k sector for sector 0. This is to allow
-+ * the system to perform memory mapping to the device,
-+ * even though the actual physical layout is unknown.
-+ * Once mapped in, the CFI query will produce all
-+ * relevant information.
-+ */
-+ meminfo.addr = 0L;
-+ meminfo.areg = 0;
-+ meminfo.nsect = 1;
-+ meminfo.bank1start = 0;
-+ meminfo.bank2start = 0;
-+
-+ meminfo.sec[0].size = 8192;
-+ meminfo.sec[0].base = 0x00000;
-+ meminfo.sec[0].bank = 1;
-+
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+
-+ device_id = flash_get_device_id();
-+
-+ switch (device_id) {
-+ case ID_I28F160C3B:
-+ case ID_I28F320C3B:
-+ case ID_I28F160C3T:
-+ case ID_I28F320C3T:
-+ flashFamily = FLASH_INTEL;
-+ break;
-+ case ID_AM29DL800B:
-+ case ID_AM29LV800B:
-+ case ID_AM29LV400B:
-+ case ID_AM29LV160B:
-+ case ID_AM29LV320B:
-+ case ID_MX29LV320AB:
-+ case ID_AM29LV320MB:
-+ case ID_AM29DL800T:
-+ case ID_AM29LV800T:
-+ case ID_AM29LV160T:
-+ case ID_AM29LV320T:
-+ case ID_MX29LV320AT:
-+ case ID_AM29LV320MT:
-+ flashFamily = FLASH_AMD;
-+ break;
-+ case ID_SST39VF1601:
-+ case ID_SST39VF3201:
-+ flashFamily = FLASH_SST;
-+ break;
-+ default:
-+ printk("Flash memory not supported! Device id = %x\n", device_id);
-+ return -1;
-+ }
-+
-+ if (flash_get_cfi(&query, 0, flashFamily) == -1) {
-+ switch(device_id) {
-+ case ID_AM29LV160T:
-+ case ID_AM29LV160B:
-+ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily);
-+ break;
-+ default:
-+ printk("CFI data structure not found. Device id = %x\n", device_id);
-+ return -1;
-+ }
-+ }
-+
-+ // need to determine if it top or bottom boot here
-+ switch (device_id)
-+ {
-+ case ID_AM29DL800B:
-+ case ID_AM29LV800B:
-+ case ID_AM29LV400B:
-+ case ID_AM29LV160B:
-+ case ID_AM29LV320B:
-+ case ID_MX29LV320AB:
-+ case ID_AM29LV320MB:
-+ case ID_I28F160C3B:
-+ case ID_I28F320C3B:
-+ case ID_I28F160C3T:
-+ case ID_I28F320C3T:
-+ case ID_SST39VF1601:
-+ case ID_SST39VF3201:
-+ flipCFIGeometry = FALSE;
-+ break;
-+ case ID_AM29DL800T:
-+ case ID_AM29LV800T:
-+ case ID_AM29LV160T:
-+ case ID_AM29LV320T:
-+ case ID_MX29LV320AT:
-+ case ID_AM29LV320MT:
-+ flipCFIGeometry = TRUE;
-+ break;
-+ default:
-+ printk("Flash memory not supported! Device id = %x\n", device_id);
-+ return -1;
-+ }
-+
-+ count=0;basecount=0L;
-+
-+ if (!flipCFIGeometry)
-+ {
-+ for (i=0; i<query.num_erase_blocks; i++) {
-+ for(j=0; j<query.erase_block[i].num_sectors; j++) {
-+ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
-+ meminfo.sec[count].base = (int) basecount;
-+ basecount += (int) query.erase_block[i].sector_size;
-+ count++;
-+ }
-+ }
-+ }
-+ else
-+ {
-+ for (i = (query.num_erase_blocks - 1); i >= 0; i--) {
-+ for(j=0; j<query.erase_block[i].num_sectors; j++) {
-+ meminfo.sec[count].size = (int) query.erase_block[i].sector_size;
-+ meminfo.sec[count].base = (int) basecount;
-+ basecount += (int) query.erase_block[i].sector_size;
-+ count++;
-+ }
-+ }
-+ }
-+
-+ meminfo.nsect = count;
-+ totalSize = meminfo.sec[count-1].base + meminfo.sec[count-1].size;
-+ return (0);
-+}
-+
-+/*********************************************************************/
-+/* Flash_sector_erase_int() is identical to flash_sector_erase(), */
-+/* except it will wait until the erase is completed before returning */
-+/* control to the calling function. This can be used in cases which */
-+/* require the program to hold until a sector is erased, without */
-+/* adding the wait check external to this function. */
-+/*********************************************************************/
-+byte flash_sector_erase_int(WORD sector)
-+{
-+ int i;
-+
-+ for( i = 0; i < 3; i++ ) {
-+ flash_command(FLASH_SERASE, sector, 0, 0);
-+ if (flash_wait(sector, 0, 0xffff) == STATUS_READY)
-+ break;
-+ }
-+
-+ return(1);
-+}
-+
-+/*********************************************************************/
-+/* flash_read_buf() reads buffer of data from the specified */
-+/* offset from the sector parameter. */
-+/*********************************************************************/
-+int flash_read_buf(WORD sector, int offset,
-+ byte *buffer, int numbytes)
-+{
-+ byte *fwp;
-+
-+ fwp = (byte *)flash_get_memptr(sector);
-+
-+ while (numbytes) {
-+ *buffer++ = *(fwp + offset);
-+ numbytes--;
-+ fwp++;
-+ }
-+
-+ return (1);
-+}
-+
-+/*********************************************************************/
-+/* flash_write_buf() utilizes */
-+/* the unlock bypass mode of the flash device. This can remove */
-+/* significant overhead from the bulk programming operation, and */
-+/* when programming bulk data a sizeable performance increase can be */
-+/* observed. */
-+/*********************************************************************/
-+int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes)
-+{
-+ int ret = -1;
-+ int i;
-+ unsigned char *p = flash_get_memptr(sector) + offset;
-+
-+ /* After writing the flash block, compare the contents to the source
-+ * buffer. Try to write the sector successfully up to three times.
-+ */
-+ for( i = 0; i < 3; i++ ) {
-+ ret = flash_write(sector, offset, buffer, numbytes);
-+ if( !memcmp( p, buffer, numbytes ) )
-+ break;
-+ /* Erase and try again */
-+ flash_sector_erase_int(sector);
-+ ret = -1;
-+ }
-+
-+ if( ret == -1 )
-+ printk( "Flash write error. Verify failed\n" );
-+
-+ return( ret );
-+}
-+
-+/*********************************************************************/
-+/* Usefull funtion to return the number of sectors in the device. */
-+/* Can be used for functions which need to loop among all the */
-+/* sectors, or wish to know the number of the last sector. */
-+/*********************************************************************/
-+int flash_get_numsectors(void)
-+{
-+ return meminfo.nsect;
-+}
-+
-+/*********************************************************************/
-+/* flash_get_sector_size() is provided for cases in which the size */
-+/* of a sector is required by a host application. The sector size */
-+/* (in bytes) is returned in the data location pointed to by the */
-+/* 'size' parameter. */
-+/*********************************************************************/
-+int flash_get_sector_size(WORD sector)
-+{
-+ return meminfo.sec[sector].size;
-+}
-+
-+/*********************************************************************/
-+/* The purpose of flash_get_memptr() is to return a memory pointer */
-+/* which points to the beginning of memory space allocated for the */
-+/* flash. All function pointers are then referenced from this */
-+/* pointer. */
-+/* */
-+/* Different systems will implement this in different ways: */
-+/* possibilities include: */
-+/* - A direct memory pointer */
-+/* - A pointer to a memory map */
-+/* - A pointer to a hardware port from which the linear */
-+/* address is translated */
-+/* - Output of an MMU function / service */
-+/* */
-+/* Also note that this function expects the pointer to a specific */
-+/* sector of the device. This can be provided by dereferencing */
-+/* the pointer from a translated offset of the sector from a */
-+/* global base pointer (e.g. flashptr = base_pointer + sector_offset)*/
-+/* */
-+/* Important: Many AMD flash devices need both bank and or sector */
-+/* address bits to be correctly set (bank address bits are A18-A16, */
-+/* and sector address bits are A18-A12, or A12-A15). Flash parts */
-+/* which do not need these bits will ignore them, so it is safe to */
-+/* assume that every part will require these bits to be set. */
-+/*********************************************************************/
-+unsigned char *flash_get_memptr(WORD sector)
-+{
-+ unsigned char *memptr = (unsigned char*)(FLASH_BASE_ADDR_REG + meminfo.sec[sector].base);
-+
-+ return (memptr);
-+}
-+
-+/*********************************************************************/
-+/* The purpose of flash_get_blk() is to return a the block number */
-+/* for a given memory address. */
-+/*********************************************************************/
-+int flash_get_blk(int addr)
-+{
-+ int blk_start, i;
-+ int last_blk = flash_get_numsectors();
-+ int relative_addr = addr - (int) FLASH_BASE_ADDR_REG;
-+
-+ for(blk_start=0, i=0; i < relative_addr && blk_start < last_blk; blk_start++)
-+ i += flash_get_sector_size(blk_start);
-+
-+ if( i > relative_addr )
-+ {
-+ blk_start--; // last blk, dec by 1
-+ }
-+ else
-+ if( blk_start == last_blk )
-+ {
-+ printk("Address is too big.\n");
-+ blk_start = -1;
-+ }
-+
-+ return( blk_start );
-+}
-+
-+/************************************************************************/
-+/* The purpose of flash_get_total_size() is to return the total size of */
-+/* the flash */
-+/************************************************************************/
-+int flash_get_total_size()
-+{
-+ return totalSize;
-+}
-+
-+/*********************************************************************/
-+/* Flash_command() is the main driver function. It performs */
-+/* every possible command available to AMD B revision */
-+/* flash parts. Note that this command is not used directly, but */
-+/* rather called through the API wrapper functions provided below. */
-+/*********************************************************************/
-+static void flash_command(int command, WORD sector, int offset, UINT16 data)
-+{
-+ volatile UINT16 *flashptr;
-+ volatile UINT16 *flashbase;
-+
-+ flashptr = (UINT16 *) flash_get_memptr(sector);
-+ flashbase = (UINT16 *) flash_get_memptr(0);
-+
-+ switch (flashFamily) {
-+ case FLASH_UNDEFINED:
-+ /* These commands should work for AMD, Intel and SST flashes */
-+ switch (command) {
-+ case FLASH_RESET:
-+ flashptr[0] = 0xF0;
-+ flashptr[0] = 0xFF;
-+ break;
-+ case FLASH_READ_ID:
-+ flashptr[0x5555] = 0xAA; /* unlock 1 */
-+ flashptr[0x2AAA] = 0x55; /* unlock 2 */
-+ flashptr[0x5555] = 0x90;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case FLASH_AMD:
-+ switch (command) {
-+ case FLASH_RESET:
-+ flashptr[0] = 0xF0;
-+ break;
-+ case FLASH_READ_ID:
-+ flashptr[0x555] = 0xAA; /* unlock 1 */
-+ flashptr[0x2AA] = 0x55; /* unlock 2 */
-+ flashptr[0x555] = 0x90;
-+ break;
-+ case FLASH_CFIQUERY:
-+ flashptr[0x55] = 0x98;
-+ break;
-+ case FLASH_UB:
-+ flashptr[0x555] = 0xAA; /* unlock 1 */
-+ flashptr[0x2AA] = 0x55; /* unlock 2 */
-+ flashptr[0x555] = 0x20;
-+ break;
-+ case FLASH_PROG:
-+ flashptr[0] = 0xA0;
-+ flashptr[offset/2] = data;
-+ break;
-+ case FLASH_UBRESET:
-+ flashptr[0] = 0x90;
-+ flashptr[0] = 0x00;
-+ break;
-+ case FLASH_SERASE:
-+ flashptr[0x555] = 0xAA; /* unlock 1 */
-+ flashptr[0x2AA] = 0x55; /* unlock 2 */
-+ flashptr[0x555] = 0x80;
-+ flashptr[0x555] = 0xAA;
-+ flashptr[0x2AA] = 0x55;
-+ flashptr[0] = 0x30;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case FLASH_INTEL:
-+ switch (command) {
-+ case FLASH_RESET:
-+ flashptr[0] = 0xFF;
-+ break;
-+ case FLASH_READ_ID:
-+ flashptr[0] = 0x90;
-+ break;
-+ case FLASH_CFIQUERY:
-+ flashptr[0] = 0x98;
-+ break;
-+ case FLASH_PROG:
-+ flashptr[0] = 0x40;
-+ flashptr[offset/2] = data;
-+ break;
-+ case FLASH_SERASE:
-+ flashptr[0] = 0x60;
-+ flashptr[0] = 0xD0;
-+ flashptr[0] = 0x20;
-+ flashptr[0] = 0xD0;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case FLASH_SST:
-+ switch (command) {
-+ case FLASH_RESET:
-+ flashbase[0x5555] = 0xAA; /* unlock 1 */
-+ flashbase[0x2AAA] = 0x55; /* unlock 2 */
-+ flashbase[0x5555] = 0xf0;
-+ break;
-+ case FLASH_READ_ID:
-+ flashbase[0x5555] = 0xAA; /* unlock 1 */
-+ flashbase[0x2AAA] = 0x55; /* unlock 2 */
-+ flashbase[0x5555] = 0x90;
-+ break;
-+ case FLASH_CFIQUERY:
-+ flashbase[0x5555] = 0xAA; /* unlock 1 */
-+ flashbase[0x2AAA] = 0x55; /* unlock 2 */
-+ flashbase[0x5555] = 0x98;
-+ break;
-+ case FLASH_UB:
-+ break;
-+ case FLASH_PROG:
-+ flashbase[0x5555] = 0xAA; /* unlock 1 */
-+ flashbase[0x2AAA] = 0x55; /* unlock 2 */
-+ flashbase[0x5555] = 0xa0;
-+ flashptr[offset/2] = data;
-+ break;
-+ case FLASH_UBRESET:
-+ break;
-+ case FLASH_SERASE:
-+ flashbase[0x5555] = 0xAA; /* unlock 1 */
-+ flashbase[0x2AAA] = 0x55; /* unlock 2 */
-+ flashbase[0x5555] = 0x80;
-+ flashbase[0x5555] = 0xAA;
-+ flashbase[0x2AAA] = 0x55;
-+ flashptr[0] = 0x30;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+/*********************************************************************/
-+/* flash_write extends the functionality of flash_program() by */
-+/* providing an faster way to program multiple data words, without */
-+/* needing the function overhead of looping algorithms which */
-+/* program word by word. This function utilizes fast pointers */
-+/* to quickly loop through bulk data. */
-+/*********************************************************************/
-+static int flash_write(WORD sector, int offset, byte *buf, int nbytes)
-+{
-+ UINT16 *src;
-+ src = (UINT16 *)buf;
-+
-+ if ((nbytes | offset) & 1) {
-+ return -1;
-+ }
-+
-+ flash_command(FLASH_UB, 0, 0, 0);
-+ while (nbytes > 0) {
-+ flash_command(FLASH_PROG, sector, offset, *src);
-+ if (flash_wait(sector, offset, *src) != STATUS_READY)
-+ break;
-+ offset +=2;
-+ nbytes -=2;
-+ src++;
-+ }
-+ flash_command(FLASH_UBRESET, 0, 0, 0);
-+
-+ return (byte*)src - buf;
-+}
-+
-+/*********************************************************************/
-+/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */
-+/* described in the flash data book. It can quickly ascertain the */
-+/* operational status of the flash device, and return an */
-+/* appropriate status code (defined in flash.h) */
-+/*********************************************************************/
-+static int flash_wait(WORD sector, int offset, UINT16 data)
-+{
-+ volatile UINT16 *flashptr; /* flash window */
-+ UINT16 d1;
-+
-+ flashptr = (UINT16 *) flash_get_memptr(sector);
-+
-+ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) {
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+ do {
-+ d1 = flashptr[offset/2];
-+ if (d1 == data)
-+ return STATUS_READY;
-+ } while (!(d1 & 0x20));
-+
-+ d1 = flashptr[offset/2];
-+
-+ if (d1 != data) {
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return STATUS_TIMEOUT;
-+ }
-+#else
-+ do {
-+ d1 = *flashptr; /* read data */
-+ d1 ^= *flashptr; /* read it again and see what toggled */
-+ if (d1 == 0) /* no toggles, nothing's happening */
-+ return STATUS_READY;
-+ } while (!(d1 & 0x20));
-+
-+ d1 = *flashptr; /* read data */
-+ d1 ^= *flashptr; /* read it again and see what toggled */
-+
-+ if (d1 != 0) {
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return STATUS_TIMEOUT;
-+ }
-+#endif
-+ } else if (flashFamily == FLASH_INTEL) {
-+ flashptr[0] = 0x70;
-+ /* Wait for completion */
-+ while(!(*flashptr & 0x80));
-+ if (*flashptr & 0x30) {
-+ flashptr[0] = 0x50;
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return STATUS_TIMEOUT;
-+ }
-+ flashptr[0] = 0x50;
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ }
-+
-+ return STATUS_READY;
-+}
-+
-+/*********************************************************************/
-+/* flash_get_device_id() will perform an autoselect sequence on the */
-+/* flash device, and return the device id of the component. */
-+/* This function automatically resets to read mode. */
-+/*********************************************************************/
-+static UINT16 flash_get_device_id()
-+{
-+ volatile UINT16 *fwp; /* flash window */
-+ UINT16 answer;
-+
-+ fwp = (UINT16 *)flash_get_memptr(0);
-+
-+ flash_command(FLASH_READ_ID, 0, 0, 0);
-+ answer = *(fwp + 1);
-+ if (answer == ID_AM29LV320M) {
-+ answer = *(fwp + 0xe);
-+ answer = *(fwp + 0xf);
-+ }
-+
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return( (UINT16) answer );
-+}
-+
-+/*********************************************************************/
-+/* flash_get_cfi() is the main CFI workhorse function. Due to it's */
-+/* complexity and size it need only be called once upon */
-+/* initializing the flash system. Once it is called, all operations */
-+/* are performed by looking at the meminfo structure. */
-+/* All possible care was made to make this algorithm as efficient as */
-+/* possible. 90% of all operations are memory reads, and all */
-+/* calculations are done using bit-shifts when possible */
-+/*********************************************************************/
-+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily)
-+{
-+ volatile UINT16 *fwp; /* flash window */
-+ int i=0;
-+
-+ flash_command(FLASH_CFIQUERY, 0, 0, 0);
-+
-+ if (cfi_struct == 0)
-+ fwp = (UINT16 *)flash_get_memptr(0);
-+ else
-+ fwp = cfi_struct;
-+
-+ /* Initial house-cleaning */
-+ for(i=0; i < 8; i++) {
-+ query->erase_block[i].sector_size = 0;
-+ query->erase_block[i].num_sectors = 0;
-+ }
-+
-+ /* If not 'QRY', then we dont have a CFI enabled device in the socket */
-+ if( fwp[0x10] != 'Q' &&
-+ fwp[0x11] != 'R' &&
-+ fwp[0x12] != 'Y') {
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return(-1);
-+ }
-+
-+ query->num_erase_blocks = fwp[0x2C];
-+ if(flashFamily == FLASH_SST)
-+ query->num_erase_blocks = 1;
-+
-+ for(i=0; i < query->num_erase_blocks; i++) {
-+ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8);
-+ query->erase_block[i].num_sectors++;
-+ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]);
-+ }
-+
-+ flash_command(FLASH_RESET, 0, 0, 0);
-+ return(1);
-+}
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,142 @@
-+/************************************************************************/
-+/* */
-+/* AMD CFI Enabled Flash Memory Drivers */
-+/* File name: CFIFLASH.H */
-+/* Revision: 1.0 5/07/98 */
-+/* */
-+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */
-+/* This software is unpublished and contains the trade secrets and */
-+/* confidential proprietary information of AMD. Unless otherwise */
-+/* provided in the Software Agreement associated herewith, it is */
-+/* licensed in confidence "AS IS" and is not to be reproduced in whole */
-+/* or part by any means except for backup. Use, duplication, or */
-+/* disclosure by the Government is subject to the restrictions in */
-+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */
-+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */
-+/* Software owned by */
-+/* Advanced Micro Devices, Inc., */
-+/* One AMD Place, */
-+/* P.O. Box 3453 */
-+/* Sunnyvale, CA 94088-3453. */
-+/************************************************************************/
-+/* This software constitutes a basic shell of source code for */
-+/* programming all AMD Flash components. AMD */
-+/* will not be responsible for misuse or illegal use of this */
-+/* software for devices not supported herein. AMD is providing */
-+/* this source code "AS IS" and will not be responsible for */
-+/* issues arising from incorrect user implementation of the */
-+/* source code herein. It is the user's responsibility to */
-+/* properly design-in this source code. */
-+/* */
-+/************************************************************************/
-+#ifndef _CFIFLASH_H
-+#define _CFIFLASH_H
-+
-+/* include board/CPU specific definitions */
-+#include "bcmtypes.h"
-+#include "board.h"
-+
-+#define FLASH_BASE_ADDR_REG FLASH_BASE
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#define MAXSECTORS 1024 /* maximum number of sectors supported */
-+
-+/* A structure for identifying a flash part. There is one for each
-+ * of the flash part definitions. We need to keep track of the
-+ * sector organization, the address register used, and the size
-+ * of the sectors.
-+ */
-+struct flashinfo {
-+ char *name; /* "Am29DL800T", etc. */
-+ unsigned long addr; /* physical address, once translated */
-+ int areg; /* Can be set to zero for all parts */
-+ int nsect; /* # of sectors -- 19 in LV, 22 in DL */
-+ int bank1start; /* first sector # in bank 1 */
-+ int bank2start; /* first sector # in bank 2, if DL part */
-+ struct {
-+ long size; /* # of bytes in this sector */
-+ long base; /* offset from beginning of device */
-+ int bank; /* 1 or 2 for DL; 1 for LV */
-+ } sec[MAXSECTORS]; /* per-sector info */
-+};
-+
-+/*
-+ * This structure holds all CFI query information as defined
-+ * in the JEDEC standard. All information up to
-+ * primary_extended_query is standard among all manufactures
-+ * with CFI enabled devices.
-+ */
-+
-+struct cfi_query {
-+ int num_erase_blocks; /* Number of sector defs. */
-+ struct {
-+ unsigned long sector_size; /* byte size of sector */
-+ int num_sectors; /* Num sectors of this size */
-+ } erase_block[8]; /* Max of 256, but 8 is good */
-+};
-+
-+/* Standard Boolean declarations */
-+#define TRUE 1
-+#define FALSE 0
-+
-+/* Define different type of flash */
-+#define FLASH_UNDEFINED 0
-+#define FLASH_AMD 1
-+#define FLASH_INTEL 2
-+#define FLASH_SST 3
-+
-+/* Command codes for the flash_command routine */
-+#define FLASH_RESET 0 /* reset to read mode */
-+#define FLASH_READ_ID 1 /* read device ID */
-+#define FLASH_CFIQUERY 2 /* CFI query */
-+#define FLASH_UB 3 /* go into unlock bypass mode */
-+#define FLASH_PROG 4 /* program a word */
-+#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */
-+#define FLASH_SERASE 6 /* sector erase */
-+
-+/* Return codes from flash_status */
-+#define STATUS_READY 0 /* ready for action */
-+#define STATUS_TIMEOUT 1 /* operation timed out */
-+
-+/* A list of AMD compatible device ID's - add others as needed */
-+#define ID_AM29DL800T 0x224A
-+#define ID_AM29DL800B 0x22CB
-+#define ID_AM29LV800T 0x22DA
-+#define ID_AM29LV800B 0x225B
-+#define ID_AM29LV400B 0x22BA
-+
-+#define ID_AM29LV160B 0x2249
-+#define ID_AM29LV160T 0x22C4
-+
-+#define ID_AM29LV320T 0x22F6
-+#define ID_MX29LV320AT 0x22A7
-+#define ID_AM29LV320B 0x22F9
-+#define ID_MX29LV320AB 0x22A8
-+
-+#define ID_AM29LV320M 0x227E
-+#define ID_AM29LV320MB 0x2200
-+#define ID_AM29LV320MT 0x2201
-+
-+#define ID_SST39VF1601 0x234B
-+#define ID_SST39VF3201 0x235B
-+
-+/* A list of Intel compatible device ID's - add others as needed */
-+#define ID_I28F160C3T 0x88C2
-+#define ID_I28F160C3B 0x88C3
-+#define ID_I28F320C3T 0x88C4
-+#define ID_I28F320C3B 0x88C5
-+
-+extern byte flash_init(void);
-+extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes);
-+extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes);
-+extern byte flash_sector_erase_int(WORD sector);
-+extern int flash_get_numsectors(void);
-+extern int flash_get_sector_size(WORD sector);
-+extern int flash_get_total_size(void);
-+extern unsigned char *flash_get_memptr(WORD sector);
-+extern int flash_get_blk(int addr);
-+
-+#endif
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/irq.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,299 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * Interrupt control functions for Broadcom 963xx MIPS boards
-+ */
-+
-+#include <asm/atomic.h>
-+
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/irq.h>
-+#include <asm/mipsregs.h>
-+#include <asm/addrspace.h>
-+#include <asm/signal.h>
-+#include <bcm_map_part.h>
-+#include <bcm_intr.h>
-+
-+static DEFINE_SPINLOCK(irq_lock);
-+
-+static void irq_dispatch_int(struct pt_regs *regs)
-+{
-+ unsigned int pendingIrqs;
-+ static unsigned int irqBit;
-+ static unsigned int isrNumber = 31;
-+
-+ pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
-+ if (!pendingIrqs) {
-+ return;
-+ }
-+
-+ while (1) {
-+ irqBit <<= 1;
-+ isrNumber++;
-+ if (isrNumber == 32) {
-+ isrNumber = 0;
-+ irqBit = 0x1;
-+ }
-+ if (pendingIrqs & irqBit) {
-+ PERF->IrqMask &= ~irqBit; // mask
-+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs);
-+ break;
-+ }
-+ }
-+}
-+
-+static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs)
-+{
-+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
-+ printk("**** Ext IRQ mask. Should not dispatch ****\n");
-+ }
-+ /* disable and clear interrupt in the controller */
-+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
-+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-+ do_IRQ(irq, regs);
-+}
-+
-+void brcm_irq_dispatch(struct pt_regs *regs)
-+{
-+ u32 cause;
-+ while((cause = (read_c0_cause()& CAUSEF_IP))) {
-+ if (cause & CAUSEF_IP7)
-+ do_IRQ(MIPS_TIMER_INT, regs);
-+ else if (cause & CAUSEF_IP2)
-+ irq_dispatch_int(regs);
-+ else if (cause & CAUSEF_IP3)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
-+ else if (cause & CAUSEF_IP4)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
-+ else if (cause & CAUSEF_IP5)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
-+ else if (cause & CAUSEF_IP6)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
-+ //cli();
-+ spin_lock_irq(&irq_lock);
-+ }
-+}
-+
-+void plat_irq_dispatch(struct pt_regs *regs)
-+{
-+ u32 cause;
-+ while((cause = (read_c0_cause()& CAUSEF_IP))) {
-+ if (cause & CAUSEF_IP7)
-+ do_IRQ(MIPS_TIMER_INT, regs);
-+ else if (cause & CAUSEF_IP2)
-+ irq_dispatch_int(regs);
-+ else if (cause & CAUSEF_IP3)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs);
-+ else if (cause & CAUSEF_IP4)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs);
-+ else if (cause & CAUSEF_IP5)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs);
-+ else if (cause & CAUSEF_IP6)
-+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs);
-+ //cli();
-+ spin_lock_irq(&irq_lock);
-+ }
-+}
-+
-+
-+void enable_brcm_irq(unsigned int irq)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
-+ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
-+ }
-+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
-+ /* enable and clear interrupt in the controller */
-+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
-+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+void disable_brcm_irq(unsigned int irq)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
-+ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
-+ }
-+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
-+ /* disable interrupt in the controller */
-+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+void ack_brcm_irq(unsigned int irq)
-+{
-+ /* Already done in brcm_irq_dispatch */
-+}
-+
-+unsigned int startup_brcm_irq(unsigned int irq)
-+{
-+ enable_brcm_irq(irq);
-+
-+ return 0; /* never anything pending */
-+}
-+
-+unsigned int startup_brcm_none(unsigned int irq)
-+{
-+ return 0;
-+}
-+
-+void end_brcm_irq(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-+ enable_brcm_irq(irq);
-+}
-+
-+void end_brcm_none(unsigned int irq)
-+{
-+}
-+
-+#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
-+
-+static void __init brcm_irq_setup(void)
-+{
-+ extern asmlinkage void brcmIRQ(void);
-+
-+ clear_c0_status(ST0_BEV);
-+ set_except_vector(0, brcmIRQ);
-+ change_c0_status(ST0_IM, ALLINTS_NOTIMER);
-+
-+#ifdef CONFIG_REMOTE_DEBUG
-+ rs_kgdb_hook(0);
-+#endif
-+}
-+
-+static struct hw_interrupt_type brcm_irq_type = {
-+ .typename = "MIPS",
-+ .startup = startup_brcm_irq,
-+ .shutdown = disable_brcm_irq,
-+ .enable = enable_brcm_irq,
-+ .disable = disable_brcm_irq,
-+ .ack = ack_brcm_irq,
-+ .end = end_brcm_irq,
-+ .set_affinity = NULL
-+};
-+
-+static struct hw_interrupt_type brcm_irq_no_end_type = {
-+ .typename = "MIPS",
-+ .startup = startup_brcm_none,
-+ .shutdown = disable_brcm_irq,
-+ .enable = enable_brcm_irq,
-+ .disable = disable_brcm_irq,
-+ .ack = ack_brcm_irq,
-+ .end = end_brcm_none,
-+ .set_affinity = NULL
-+};
-+
-+void __init arch_init_irq(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < NR_IRQS; i++) {
-+ irq_desc[i].status = IRQ_DISABLED;
-+ irq_desc[i].action = 0;
-+ irq_desc[i].depth = 1;
-+ irq_desc[i].handler = &brcm_irq_type;
-+ }
-+
-+ brcm_irq_setup();
-+}
-+
-+int request_external_irq(unsigned int irq,
-+ FN_HANDLER handler,
-+ unsigned long irqflags,
-+ const char * devname,
-+ void *dev_id)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear
-+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask
-+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive
-+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered
-+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level
-+
-+ local_irq_restore(flags);
-+
-+ return( request_irq(irq, handler, irqflags, devname, dev_id) );
-+}
-+
-+/* VxWorks compatibility function(s). */
-+
-+unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
-+ unsigned int interruptId)
-+{
-+ int nRet = -1;
-+ char *devname;
-+
-+ devname = kmalloc(16, GFP_KERNEL);
-+ if (devname)
-+ sprintf( devname, "brcm_%d", interruptId );
-+
-+ /* Set the IRQ description to not automatically enable the interrupt at
-+ * the end of an ISR. The driver that handles the interrupt must
-+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
-+ * is consistent with interrupt handling on VxWorks.
-+ */
-+ irq_desc[interruptId].handler = &brcm_irq_no_end_type;
-+
-+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
-+ {
-+ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
-+ devname, (void *) param );
-+ }
-+ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
-+ {
-+ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
-+ devname, (void *) param );
-+ }
-+
-+ return( nRet );
-+}
-+
-+
-+/* Debug function. */
-+
-+void dump_intr_regs(void)
-+{
-+ printk("PERF->ExtIrqCfg [%08x]\n", *(&(PERF->ExtIrqCfg)));
-+}
-+
-+EXPORT_SYMBOL(enable_brcm_irq);
-+EXPORT_SYMBOL(disable_brcm_irq);
-+EXPORT_SYMBOL(request_external_irq);
-+EXPORT_SYMBOL(BcmHalMapInterrupt);
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Kconfig linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,172 @@
-+# Kernel and Driver configuration for Broadcom Commengine ADSL board
-+choice
-+ prompt "Broadcom Commengine ADSL board"
-+ depends on MIPS_BRCM
-+ default BCM96345
-+ help
-+ Select different Broadcom ADSL board
-+
-+config BCM96338
-+ bool "96338 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+
-+config BCM96345
-+ bool "96345 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+
-+config BCM96348
-+ bool "96348 ADSL board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+
-+endchoice
-+
-+config BCM_BOARD
-+ bool "Support for Broadcom Board"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SERIAL
-+ bool "Support for Serial Port"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENET
-+ tristate "Support for Ethernet"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_USB
-+ tristate "Support for USB"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_WLAN
-+ tristate "Support for Wireless"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_PCI
-+ bool "Support for PCI"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+ select PCI
-+
-+config BCM_ATMAPI
-+ tristate "Support for ATM"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ATMTEST
-+ tristate "Support for ATM Diagnostic"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ADSL
-+ tristate "Support for ADSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENDPOINT
-+ tristate "Support for VOICE"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_PROCFS
-+ tristate "Support for PROCFS"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_VDSL
-+ tristate "Support for VDSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SECURITY
-+ tristate "Support for SECURITY"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_HPNA
-+ tristate "Support for HPNA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_BOARD_IMPL
-+ int "Implementation index for ADSL Board"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SERIAL_IMPL
-+ int "Implementation index for Serial"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENET_IMPL
-+ int "Implementation index for Ethernet"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_USB_IMPL
-+ int "Implementation index for USB"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_WLAN_IMPL
-+ int "Implementation index for WIRELESS"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ATMAPI_IMPL
-+ int "Implementation index for ATM"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ATMTEST_IMPL
-+ int "Implementation index for ATM Diagnostic"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_BLAA_IMPL
-+ int "Implementation index for BLAA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ADSL_IMPL
-+ int "Implementation index for ADSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_ENDPOINT_IMPL
-+ int "Implementation index for VOICE"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_PROCFS_IMPL
-+ int "Implementation index for PROCFS"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_VDSL_IMPL
-+ int "Implementation index for VDSL"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_SECURITY_IMPL
-+ int "Implementation index for SECURITY"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+config BCM_HPNA_IMPL
-+ int "Implementation index for HPNA"
-+ depends on BCM96338 || BCM96345 || BCM96348
-+
-+choice
-+ prompt "Root File System"
-+ depends on MIPS_BRCM
-+ default ROOTFS_SQUASHFS
-+ help
-+ Select root file system on the board flash.
-+
-+config ROOTFS_SQUASHFS
-+ bool "SQUASHFS"
-+config ROOTFS_CRAMFS
-+ bool "CRAMFS"
-+config ROOTFS_JFFS2
-+ bool "JFFS2"
-+config ROOTFS_NFS
-+ bool "NFS"
-+
-+endchoice
-+
-+config ROOT_FLASHFS
-+ string "flash partition"
-+ depends on ROOTFS_SQUASHFS || ROOTFS_CRAMFS || ROOTFS_JFFS2
-+ default "root=31:0 ro noinitrd" if ROOTFS_SQUASHFS = y || ROOTFS_CRAMFS = y
-+ default "root=31:2 ro noinitrd" if ROOTFS_JFFS2 = y
-+ help
-+ This is the root file system partition on flash memory
-+
-+config ROOT_NFS_DIR
-+ string "NFS server path"
-+ depends on ROOTFS_NFS
-+ default "/opt/bcm96338/targets/96338R/fs" if BCM96338 = y
-+ default "/opt/bcm96345/targets/96345R/fs" if BCM96345 = y
-+ default "/opt/bcm96348/targets/96348R/fs" if BCM96348 = y
-+ help
-+ This is the path of NFS server (host system)
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Makefile linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,23 @@
-+#
-+# Makefile for generic Broadcom MIPS boards
-+#
-+# Copyright (C) 2004 Broadcom Corporation
-+#
-+obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_flash.o bcm63xx_led.o board.o boardparms.o cfiflash.o
-+
-+SRCBASE := $(TOPDIR)
-+EXTRA_CFLAGS += -I$(SRCBASE)/include
-+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
-+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
-+
-+
-+ifeq "$(ADSL)" "ANNEX_B"
-+EXTRA_CFLAGS += -DADSL_ANNEXB
-+endif
-+ifeq "$(ADSL)" "SADSL"
-+EXTRA_CFLAGS += -DADSL_SADSL
-+endif
-+ifeq "$(ADSL)" "ANNEX_C"
-+EXTRA_CFLAGS += -DADSL_ANNEXC
-+endif
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/prom.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c 2006-08-03 16:40:27.000000000 +0200
-@@ -0,0 +1,250 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * prom.c: PROM library initialization code.
-+ *
-+ */
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <linux/blkdev.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/cpu.h>
-+#include <asm/time.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+#include "boardparms.h"
-+#include "softdsl/AdslCoreDefs.h"
-+
-+
-+//char arcs_cmdline[CL_SIZE] __initdata = {0};
-+/* inv_xde */
-+int boot_loader_type;
-+
-+extern int do_syslog(int, char *, int);
-+extern void serial_init(void);
-+extern void __init InitNvramInfo( void );
-+extern void kerSysFlashInit( void );
-+extern unsigned long get_nvram_start_addr(void);
-+void __init create_root_nfs_cmdline( char *cmdline );
-+
-+#if defined(CONFIG_BCM96338)
-+#define CPU_CLOCK 240000000
-+#define MACH_BCM MACH_BCM96338
-+#endif
-+#if defined(CONFIG_BCM96345)
-+#define CPU_CLOCK 140000000
-+#define MACH_BCM MACH_BCM96345
-+#endif
-+#if defined(CONFIG_BCM96348)
-+void __init calculateCpuSpeed(void);
-+static unsigned long cpu_speed;
-+#define CPU_CLOCK cpu_speed
-+#define MACH_BCM MACH_BCM96348
-+#endif
-+
-+const char *get_system_type(void)
-+{
-+ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-+
-+ return( pNvramData->szBoardId );*/
-+ return "brcm63xx";
-+}
-+
-+unsigned long getMemorySize(void)
-+{
-+ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
-+
-+ unsigned long ulSdramSize;
-+
-+ switch( ulSdramType )
-+ {
-+ case BP_MEMORY_16MB_1_CHIP:
-+ case BP_MEMORY_16MB_2_CHIP:
-+ ulSdramSize = 16 * 1024 * 1024;
-+ break;
-+ case BP_MEMORY_32MB_1_CHIP:
-+ case BP_MEMORY_32MB_2_CHIP:
-+ ulSdramSize = 32 * 1024 * 1024;
-+ break;
-+ case BP_MEMORY_64MB_2_CHIP:
-+ ulSdramSize = 64 * 1024 * 1024;
-+ break;
-+ default:
-+ ulSdramSize = 8 * 1024 * 1024;
-+ break;
-+ }
-+ if (boot_loader_type == BOOT_CFE)
-+ return ulSdramSize;
-+ else
-+ // assume that there is one contiguous memory map
-+ return boot_mem_map.map[0].size;
-+}
-+
-+/* --------------------------------------------------------------------------
-+ Name: prom_init
-+ -------------------------------------------------------------------------- */
-+void __init prom_init(void)
-+{
-+ extern ulong r4k_interval;
-+
-+ serial_init();
-+
-+ /* Need to fixup boot loader detection code
-+ * whithout changing prom_init prototype
-+ */
-+
-+ if (boot_loader_type == BOOT_CFE)
-+ kerSysFlashInit();
-+
-+ do_syslog(8, NULL, 8);
-+
-+ printk( "%s prom init\n", get_system_type() );
-+
-+ PERF->IrqMask = 0;
-+
-+ arcs_cmdline[0] = '\0';
-+#if defined(CONFIG_ROOT_NFS)
-+ create_root_nfs_cmdline( arcs_cmdline );
-+#elif defined(CONFIG_ROOT_FLASHFS)
-+ strcpy(arcs_cmdline, CONFIG_ROOT_FLASHFS);
-+#endif
-+//#define ADSL_SDRAM_IMAGE_SIZE 0x40000
-+ /* inv_xde */
-+ //add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-+ if (boot_loader_type == BOOT_CFE)
-+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-+ else
-+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-+#if defined(CONFIG_BCM96348)
-+ calculateCpuSpeed();
-+#endif
-+ /* Count register increments every other clock */
-+ r4k_interval = CPU_CLOCK / HZ / 2;
-+ mips_hpt_frequency = CPU_CLOCK / 2;
-+
-+ mips_machgroup = MACH_GROUP_BRCM;
-+ mips_machtype = MACH_BCM;
-+}
-+
-+/* --------------------------------------------------------------------------
-+ Name: prom_free_prom_memory
-+Abstract:
-+ -------------------------------------------------------------------------- */
-+void __init prom_free_prom_memory(void)
-+{
-+
-+}
-+
-+#if 0
-+#if defined(CONFIG_ROOT_NFS)
-+/* This function reads in a line that looks something like this:
-+ *
-+ *
-+ * CFE bootline=bcmEnet(0,0)host:vmlinux e=192.169.0.100:ffffff00 h=192.169.0.1
-+ *
-+ *
-+ * and retuns in the cmdline parameter some that looks like this:
-+ *
-+ * CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/opt/targets/96345R/fs
-+ * ip=192.168.0.100:192.168.0.1::255.255.255.0::eth0:off rw"
-+ */
-+#define BOOT_LINE_ADDR 0x0
-+#define HEXDIGIT(d) ((d >= '0' && d <= '9') ? (d - '0') : ((d | 0x20) - 'W'))
-+#define HEXBYTE(b) (HEXDIGIT((b)[0]) << 4) + HEXDIGIT((b)[1])
-+extern unsigned long get_nvram_start_addr(void);
-+
-+void __init create_root_nfs_cmdline( char *cmdline )
-+{
-+ char root_nfs_cl[] = "root=/dev/nfs nfsroot=%s:" CONFIG_ROOT_NFS_DIR
-+ " ip=%s:%s::%s::eth0:off rw";
-+
-+ char *localip = NULL;
-+ char *hostip = NULL;
-+ char mask[16] = "";
-+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-+ char bootline[128] = "";
-+ char *p = bootline;
-+
-+ memcpy(bootline, pNvramData->szBootline, sizeof(bootline));
-+ while( *p )
-+ {
-+ if( p[0] == 'e' && p[1] == '=' )
-+ {
-+ /* Found local ip address */
-+ p += 2;
-+ localip = p;
-+ while( *p && *p != ' ' && *p != ':' )
-+ p++;
-+ if( *p == ':' )
-+ {
-+ /* Found network mask (eg FFFFFF00 */
-+ *p++ = '\0';
-+ sprintf( mask, "%u.%u.%u.%u", HEXBYTE(p), HEXBYTE(p + 2),
-+ HEXBYTE(p + 4), HEXBYTE(p + 6) );
-+ p += 4;
-+ }
-+ else if( *p == ' ' )
-+ *p++ = '\0';
-+ }
-+ else if( p[0] == 'h' && p[1] == '=' )
-+ {
-+ /* Found host ip address */
-+ p += 2;
-+ hostip = p;
-+ while( *p && *p != ' ' )
-+ p++;
-+ if( *p == ' ' )
-+ *p++ = '\0';
-+ }
-+ else
-+ p++;
-+ }
-+
-+ if( localip && hostip )
-+ sprintf( cmdline, root_nfs_cl, hostip, localip, hostip, mask );
-+}
-+#endif
-+#endif
-+
-+#if defined(CONFIG_BCM96348)
-+/* *********************************************************************
-+ * calculateCpuSpeed()
-+ * Calculate the BCM6348 CPU speed by reading the PLL strap register
-+ * and applying the following formula:
-+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
-+ * Input parameters:
-+ * none
-+ * Return value:
-+ * none
-+ ********************************************************************* */
-+void __init calculateCpuSpeed(void)
-+{
-+ UINT32 pllStrap = PERF->PllStrap;
-+ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
-+ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
-+ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
-+
-+ cpu_speed = (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
-+}
-+#endif
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/ser_init.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,180 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * Broadcom bcm63xx serial port initialization, also prepare for printk
-+ * by registering with console_init
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/console.h>
-+#include <linux/sched.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/irq.h>
-+#include <asm/reboot.h>
-+#include <asm/gdb-stub.h>
-+#include <asm/mc146818rtc.h>
-+
-+#include <bcm_map_part.h>
-+#include <board.h>
-+
-+#define SER63XX_DEFAULT_BAUD 115200
-+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
-+#define stUart ((volatile Uart * const) UART_BASE)
-+
-+// Transmit interrupts
-+#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR)
-+// Receive interrupts
-+#define RXINT (RXFIFONE | RXOVFERR)
-+
-+/* --------------------------------------------------------------------------
-+ Name: serial_init
-+ Purpose: Initalize the UART
-+-------------------------------------------------------------------------- */
-+void __init serial_init(void)
-+{
-+ UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
-+ ULONG clockFreqHz;
-+
-+#if defined(CONFIG_BCM96345)
-+ // Make sure clock is ticking
-+ PERF->blkEnables |= UART_CLK_EN;
-+#endif
-+
-+ /* Dissable channel's receiver and transmitter. */
-+ stUart->control &= ~(BRGEN|TXEN|RXEN);
-+
-+ /*--------------------------------------------------------------------*/
-+ /* Write the table value to the clock select register. */
-+ /* DPullen - this is the equation to use: */
-+ /* value = clockFreqHz / baud / 32-1; */
-+ /* (snmod) Actually you should also take into account any necessary */
-+ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */
-+ /* and subtract 1. If 1, just divide by 2 */
-+ /*--------------------------------------------------------------------*/
-+ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
-+ tmpVal = (clockFreqHz / tmpVal) / 16;
-+ if( tmpVal & 0x01 )
-+ tmpVal /= 2; //Rounding up, so sub is already accounted for
-+ else
-+ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
-+ stUart->baudword = tmpVal;
-+
-+ /* Finally, re-enable the transmitter and receiver. */
-+ stUart->control |= (BRGEN|TXEN|RXEN);
-+
-+ stUart->config = (BITS8SYM | ONESTOP);
-+ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA;
-+ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
-+ stUart->intMask = 0;
-+ stUart->intMask = RXINT | TXINT;
-+}
-+
-+
-+/* prom_putc()
-+ * Output a character to the UART
-+ */
-+void prom_putc(char c)
-+{
-+ /* Wait for Tx uffer to empty */
-+ while (! (READ16(stUart->intStatus) & TXFIFOEMT));
-+ /* Send character */
-+ stUart->Data = c;
-+}
-+
-+/* prom_puts()
-+ * Write a string to the UART
-+ */
-+void prom_puts(const char *s)
-+{
-+ while (*s) {
-+ if (*s == '\n') {
-+ prom_putc('\r');
-+ }
-+ prom_putc(*s++);
-+ }
-+}
-+
-+
-+/* prom_getc_nowait()
-+ * Returns a character from the UART
-+ * Returns -1 if no characters available or corrupted
-+ */
-+int prom_getc_nowait(void)
-+{
-+ uint16 uStatus;
-+ int cData = -1;
-+
-+ uStatus = READ16(stUart->intStatus);
-+
-+ if (uStatus & RXFIFONE) { /* Do we have a character? */
-+ cData = READ16(stUart->Data) & 0xff; /* Read character */
-+ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */
-+ cData = -1;
-+ }
-+ }
-+
-+ return cData;
-+}
-+
-+/* prom_getc()
-+ * Returns a charcter from the serial port
-+ * Will block until it receives a valid character
-+*/
-+char prom_getc(void)
-+{
-+ int cData = -1;
-+
-+ /* Loop until we get a valid character */
-+ while(cData == -1) {
-+ cData = prom_getc_nowait();
-+ }
-+ return (char) cData;
-+}
-+
-+/* prom_testc()
-+ * Returns 0 if no characters available
-+ */
-+int prom_testc(void)
-+{
-+ uint16 uStatus;
-+
-+ uStatus = READ16(stUart->intStatus);
-+
-+ return (uStatus & RXFIFONE);
-+}
-+
-+#if defined (CONFIG_REMOTE_DEBUG)
-+/* Prevent other code from writing to the serial port */
-+void _putc(char c) { }
-+void _puts(const char *ptr) { }
-+#else
-+/* Low level outputs call prom routines */
-+void _putc(char c) {
-+ prom_putc(c);
-+}
-+void _puts(const char *ptr) {
-+ prom_puts(ptr);
-+}
-+#endif
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/setup.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,523 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * Generic setup routines for Broadcom 963xx MIPS boards
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/kdev_t.h>
-+#include <linux/types.h>
-+#include <linux/console.h>
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/pm.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/bcache.h>
-+#include <asm/irq.h>
-+#include <asm/time.h>
-+#include <asm/reboot.h>
-+#include <asm/gdb-stub.h>
-+
-+extern void brcm_timer_setup(struct irqaction *irq);
-+extern unsigned long getMemorySize(void);
-+
-+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <bcm_map_part.h>
-+#include <bcmpci.h>
-+
-+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-+#endif
-+
-+/* This function should be in a board specific directory. For now,
-+ * assume that all boards that include this file use a Broadcom chip
-+ * with a soft reset bit in the PLL control register.
-+ */
-+static void brcm_machine_restart(char *command)
-+{
-+ const unsigned long ulSoftReset = 0x00000001;
-+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
-+ *pulPllCtrl |= ulSoftReset;
-+}
-+
-+static void brcm_machine_halt(void)
-+{
-+ printk("System halted\n");
-+ while (1);
-+}
-+
-+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
-+
-+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
-+{
-+ /* write index then value */
-+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
-+ mpi->pcicfgdata = value;
-+}
-+
-+static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
-+{
-+ /* write index then get value */
-+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
-+ return mpi->pcicfgdata;
-+}
-+
-+/*
-+ * mpi_ResetPcCard: Set/Reset the PcCard
-+ */
-+static void mpi_ResetPcCard(int cardtype, BOOL bReset)
-+{
-+ if (cardtype == MPI_CARDTYPE_NONE) {
-+ return;
-+ }
-+
-+ if (cardtype == MPI_CARDTYPE_CARDBUS) {
-+ bReset = ! bReset;
-+ }
-+
-+ if (bReset) {
-+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
-+ } else {
-+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
-+ }
-+}
-+
-+/*
-+ * mpi_ConfigCs: Configure an MPI/EBI chip select
-+ */
-+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
-+{
-+ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
-+ mpi->cs[cs].config = flags;
-+}
-+
-+/*
-+ * mpi_InitPcmciaSpace
-+ */
-+static void mpi_InitPcmciaSpace(void)
-+{
-+ // ChipSelect 4 controls PCMCIA Memory accesses
-+ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
-+ // ChipSelect 5 controls PCMCIA Attribute accesses
-+ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
-+ // ChipSelect 6 controls PCMCIA I/O accesses
-+ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
-+
-+ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) |
-+ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) |
-+ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) |
-+ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
-+
-+ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
-+}
-+
-+/*
-+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
-+ *
-+ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc
-+ * CCD1# CCD2# CVS1 CVS2 Type
-+ *
-+ * GND GND open open 16-bit 5 vdc
-+ *
-+ * GND GND GND open 16-bit 3.3 vdc
-+ *
-+ * GND GND open GND 16-bit x.x vdc
-+ *
-+ * GND GND GND GND 16-bit 3.3 & x.x vdc
-+ *
-+ *====================================================================
-+ *
-+ * CVS1 GND CCD1# open CardBus 3.3 vdc
-+ *
-+ * GND CVS2 open CCD2# CardBus x.x vdc
-+ *
-+ * GND CVS1 CCD2# open CardBus y.y vdc
-+ *
-+ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc
-+ *
-+ * CVS2 GND open CCD1# CardBus x.x & y.y vdc
-+ *
-+ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc
-+ *
-+ */
-+static int cardtype_vcc_detect(void)
-+{
-+ uint32 data32;
-+ int cardtype;
-+
-+ cardtype = MPI_CARDTYPE_NONE;
-+ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
-+ // the CVS pins to 0.
-+ data32 = mpi->pcmcia_cntl1;
-+ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in.
-+ {
-+ case 0x00000003: // No Card is in the slot.
-+ printk("mpi: No Card is in the PCMCIA slot\n");
-+ break;
-+
-+ case 0x00000002: // Partial insertion, No CD2#.
-+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
-+ break;
-+
-+ case 0x00000001: // Partial insertion, No CD1#.
-+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
-+ break;
-+
-+ case 0x00000000:
-+ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
-+ // float the CVS pins.
-+ mdelay(1);
-+ data32 = mpi->pcmcia_cntl1;
-+ // Read the Register.
-+ switch (data32 & 0x0000000C) // See what is on the CVS pins.
-+ {
-+ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
-+ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
-+ cardtype = MPI_CARDTYPE_PCMCIA;
-+ break;
-+
-+ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
-+ // 2 valid voltage options.
-+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
-+ {
-+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
-+ // This is not a valid combination.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
-+ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
-+ mdelay(1);
-+ data32 = mpi->pcmcia_cntl1;
-+ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ } else { // CCD2 is tied to CVS1.
-+ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
-+ cardtype = MPI_CARDTYPE_CARDBUS;
-+ }
-+ break;
-+
-+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-+ // This is not a valid combination.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
-+ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
-+ cardtype = MPI_CARDTYPE_PCMCIA;
-+ break;
-+ }
-+ break;
-+
-+ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
-+ // 2 valid voltage options.
-+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
-+ {
-+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
-+ // This is not a valid combination.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
-+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-+ mdelay(1);
-+ data32 = mpi->pcmcia_cntl1;
-+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ } else {// CCD2 is tied to CVS2.
-+ printk("mpi: Detected 3.3 and x.x Cardbus card\n");
-+ cardtype = MPI_CARDTYPE_CARDBUS;
-+ }
-+ break;
-+
-+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-+ // This is not a valid combination.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
-+ cardtype = MPI_CARDTYPE_PCMCIA;
-+ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
-+ break;
-+ }
-+ break;
-+
-+ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2.
-+ // 5 valid voltage options.
-+
-+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
-+ {
-+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
-+ // This is not a valid combination.
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
-+ // CCD1 is tied to ground.
-+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-+ mdelay(1);
-+ data32 = mpi->pcmcia_cntl1;
-+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1.
-+ printk("mpi: Detected y.y vdc Cardbus card\n");
-+ } else { // CCD2 is tied to CVS2.
-+ printk("mpi: Detected x.x vdc Cardbus card\n");
-+ }
-+ cardtype = MPI_CARDTYPE_CARDBUS;
-+ break;
-+
-+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-+ // CCD2 is tied to ground.
-+
-+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-+ mdelay(1);
-+ data32 = mpi->pcmcia_cntl1;
-+ if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
-+ printk("mpi: Detected 3.3 vdc Cardbus card\n");
-+ } else { // CCD1 is tied to CVS2.
-+ printk("mpi: Detected x.x and y.y Cardbus card\n");
-+ }
-+ cardtype = MPI_CARDTYPE_CARDBUS;
-+ break;
-+
-+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
-+ cardtype = MPI_CARDTYPE_PCMCIA;
-+ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ printk("mpi: Unknown card plugged into slot\n");
-+ break;
-+
-+ }
-+ }
-+ return cardtype;
-+}
-+
-+/*
-+ * mpi_DetectPcCard: Detect the plugged in PC-Card
-+ * Return: < 0 => Unknown card detected
-+ * 0 => No card detected
-+ * 1 => 16-bit card detected
-+ * 2 => 32-bit CardBus card detected
-+ */
-+static int mpi_DetectPcCard(void)
-+{
-+ int cardtype;
-+
-+ cardtype = cardtype_vcc_detect();
-+ switch(cardtype) {
-+ case MPI_CARDTYPE_PCMCIA:
-+ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
-+ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
-+ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
-+ mpi_InitPcmciaSpace();
-+ mpi_ResetPcCard(cardtype, FALSE);
-+ // Hold card in reset for 10ms
-+ mdelay(10);
-+ mpi_ResetPcCard(cardtype, TRUE);
-+ // Let card come out of reset
-+ mdelay(100);
-+ break;
-+ case MPI_CARDTYPE_CARDBUS:
-+ // 8 => CardBus Enable
-+ // 1 => PCI Slot Number
-+ // C => Float VS1 & VS2
-+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) |
-+ CARDBUS_ENABLE |
-+ (CARDBUS_SLOT << 8)|
-+ VS2_OEN |
-+ VS1_OEN;
-+ /* access to this memory window will be to/from CardBus */
-+ mpi->l2pmremap1 |= CARDBUS_MEM;
-+
-+ // Need to reset the Cardbus Card. There's no CardManager to do this,
-+ // and we need to be ready for PCI configuration.
-+ mpi_ResetPcCard(cardtype, FALSE);
-+ // Hold card in reset for 10ms
-+ mdelay(10);
-+ mpi_ResetPcCard(cardtype, TRUE);
-+ // Let card come out of reset
-+ mdelay(100);
-+ break;
-+ default:
-+ break;
-+ }
-+ return cardtype;
-+}
-+
-+static int mpi_init(void)
-+{
-+ unsigned long data;
-+ unsigned int chipid;
-+ unsigned int chiprev;
-+ unsigned int sdramsize;
-+
-+ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
-+ chiprev = (PERF->RevID & 0xFF);
-+ sdramsize = getMemorySize();
-+ /*
-+ * Init the pci interface
-+ */
-+ data = GPIO->GPIOMode; // GPIO mode register
-+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
-+ GPIO->GPIOMode = data; // PCI internal arbiter
-+
-+ /*
-+ * In the BCM6348 CardBus support is defaulted to Slot 0
-+ * because there is no external IDSEL for CardBus. To disable
-+ * the CardBus and allow a standard PCI card in Slot 0
-+ * set the cbus_idsel field to 0x1f.
-+ */
-+ /*
-+ uData = mpi->pcmcia_cntl1;
-+ uData |= CARDBUS_IDSEL;
-+ mpi->pcmcia_cntl1 = uData;
-+ */
-+ // Setup PCI I/O Window range. Give 64K to PCI I/O
-+ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
-+ // UBUS to PCI I/O base address
-+ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
-+ // UBUS to PCI I/O Window remap
-+ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
-+
-+ // enable PCI related GPIO pins and data swap between system and PCI bus
-+ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
-+
-+ /* Enable 6348 BusMaster and Memory access mode */
-+ data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
-+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-+ mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
-+
-+ /* Configure two 16 MByte PCI to System memory regions. */
-+ /* These memory regions are used when PCI device is a bus master */
-+ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
-+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
-+ mpi->sp0remap = 0x0;
-+
-+ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
-+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
-+ mpi->sp1remap = 0x0;
-+ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
-+
-+ if ((chipid == 0x6348) && (chiprev == 0xb0)) {
-+ mpi->sp0range = ~(sdramsize-1);
-+ mpi->sp1range = ~(sdramsize-1);
-+ }
-+ /*
-+ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
-+ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in
-+ * first read.
-+ */
-+ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
-+ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
-+ data |= 0x00000080;
-+ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
-+
-+ /* enable pci interrupt */
-+ mpi->locintstat |= (EXT_PCI_INT << 16);
-+
-+ mpi_DetectPcCard();
-+
-+ ioport_resource.start = BCM_PCI_IO_BASE;
-+ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
-+
-+#if defined(CONFIG_USB)
-+ PERF->blkEnables |= USBH_CLK_EN;
-+ mdelay(100);
-+ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
-+#endif
-+
-+ return 0;
-+}
-+#endif
-+
-+static int __init brcm63xx_setup(void)
-+{
-+ extern int panic_timeout;
-+
-+ _machine_restart = brcm_machine_restart;
-+ _machine_halt = brcm_machine_halt;
-+ pm_power_off = brcm_machine_halt;
-+
-+ board_timer_setup = brcm_timer_setup;
-+
-+ panic_timeout = 5;
-+
-+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
-+ /* mpi initialization */
-+ mpi_init();
-+#endif
-+ return 0;
-+}
-+
-+void plat_setup(void)
-+{
-+ brcm63xx_setup();
-+}
-+
-+/***************************************************************************
-+ * C++ New and delete operator functions
-+ ***************************************************************************/
-+
-+/* void *operator new(unsigned int sz) */
-+void *_Znwj(unsigned int sz)
-+{
-+ return( kmalloc(sz, GFP_KERNEL) );
-+}
-+
-+/* void *operator new[](unsigned int sz)*/
-+void *_Znaj(unsigned int sz)
-+{
-+ return( kmalloc(sz, GFP_KERNEL) );
-+}
-+
-+/* placement new operator */
-+/* void *operator new (unsigned int size, void *ptr) */
-+void *ZnwjPv(unsigned int size, void *ptr)
-+{
-+ return ptr;
-+}
-+
-+/* void operator delete(void *m) */
-+void _ZdlPv(void *m)
-+{
-+ kfree(m);
-+}
-+
-+/* void operator delete[](void *m) */
-+void _ZdaPv(void *m)
-+{
-+ kfree(m);
-+}
-+
-+EXPORT_SYMBOL(_Znwj);
-+EXPORT_SYMBOL(_Znaj);
-+EXPORT_SYMBOL(ZnwjPv);
-+EXPORT_SYMBOL(_ZdlPv);
-+EXPORT_SYMBOL(_ZdaPv);
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,2 @@
-+#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/time.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c
---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,277 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * Setup time for Broadcom 963xx MIPS boards
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/timex.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/ptrace.h>
-+#include <asm/div64.h>
-+#include <asm/time.h>
-+
-+#include <bcm_map_part.h>
-+#include <bcm_intr.h>
-+
-+unsigned long r4k_interval; /* Amount to increment compare reg each time */
-+static unsigned long r4k_cur; /* What counter should be at next timer irq */
-+
-+/* Cycle counter value at the previous timer interrupt.. */
-+static unsigned int timerhi = 0, timerlo = 0;
-+
-+extern volatile unsigned long wall_jiffies;
-+
-+/* Optional board-specific timer routine */
-+void (*board_timer_interrupt)(int irq, void *dev_id, struct pt_regs * regs);
-+
-+static inline void ack_r4ktimer(unsigned long newval)
-+{
-+ write_c0_compare(newval);
-+}
-+
-+/*
-+ * There are a lot of conceptually broken versions of the MIPS timer interrupt
-+ * handler floating around. This one is rather different, but the algorithm
-+ * is provably more robust.
-+ */
-+static irqreturn_t brcm_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ unsigned int count;
-+
-+ if (r4k_interval == 0)
-+ goto null;
-+
-+ do {
-+ do_timer(regs);
-+
-+ if (board_timer_interrupt)
-+ board_timer_interrupt(irq, dev_id, regs);
-+
-+ r4k_cur += r4k_interval;
-+ ack_r4ktimer(r4k_cur);
-+
-+ } while (((count = (unsigned long)read_c0_count())
-+ - r4k_cur) < 0x7fffffff);
-+
-+ if (!jiffies) {
-+ /*
-+ * If jiffies has overflowed in this timer_interrupt we must
-+ * update the timer[hi]/[lo] to make do_fast_gettimeoffset()
-+ * quotient calc still valid. -arca
-+ */
-+ timerhi = timerlo = 0;
-+ } else {
-+ /*
-+ * The cycle counter is only 32 bit which is good for about
-+ * a minute at current count rates of upto 150MHz or so.
-+ */
-+ timerhi += (count < timerlo); /* Wrap around */
-+ timerlo = count;
-+ }
-+
-+ return IRQ_HANDLED;
-+
-+null:
-+ ack_r4ktimer(0);
-+ return IRQ_NONE;
-+}
-+
-+static struct irqaction brcm_timer_action = {
-+ .handler = brcm_timer_interrupt,
-+ .flags = SA_INTERRUPT,
-+ .mask = CPU_MASK_NONE,
-+ .name = "timer",
-+ .next = NULL,
-+ .dev_id = brcm_timer_interrupt,
-+};
-+
-+
-+void __init brcm_timer_setup(struct irqaction *irq)
-+{
-+ r4k_cur = (read_c0_count() + r4k_interval);
-+ write_c0_compare(r4k_cur);
-+
-+ /* we are using the cpu counter for timer interrupts */
-+ irq->handler = no_action; /* we use our own handler */
-+ setup_irq(MIPS_TIMER_INT, &brcm_timer_action);
-+ set_c0_status(IE_IRQ5);
-+}
-+
-+#if 0
-+/* This is for machines which generate the exact clock. */
-+#define USECS_PER_JIFFY (1000000/HZ)
-+#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff)
-+
-+static void call_do_div64_32( unsigned long *res, unsigned int high,
-+ unsigned int low, unsigned long base )
-+{
-+ do_div64_32(*res, high, low, base);
-+}
-+
-+/*
-+ * FIXME: Does playing with the RP bit in c0_status interfere with this code?
-+ */
-+static unsigned long do_fast_gettimeoffset(void)
-+{
-+ u32 count;
-+ unsigned long res, tmp;
-+
-+ /* Last jiffy when do_fast_gettimeoffset() was called. */
-+ static unsigned long last_jiffies=0;
-+ unsigned long quotient;
-+
-+ /*
-+ * Cached "1/(clocks per usec)*2^32" value.
-+ * It has to be recalculated once each jiffy.
-+ */
-+ static unsigned long cached_quotient=0;
-+
-+ tmp = jiffies;
-+
-+ quotient = cached_quotient;
-+
-+ if (tmp && last_jiffies != tmp) {
-+ last_jiffies = tmp;
-+#ifdef CONFIG_CPU_MIPS32
-+ if (last_jiffies != 0) {
-+
-+ unsigned long r0;
-+ /* gcc 3.0.1 gets an internal compiler error if there are two
-+ * do_div64_32 inline macros. To work around this problem,
-+ * do_div64_32 is called as a function.
-+ */
-+ call_do_div64_32(&r0, timerhi, timerlo, tmp);
-+ call_do_div64_32(&quotient, USECS_PER_JIFFY,
-+ USECS_PER_JIFFY_FRAC, r0);
-+
-+ cached_quotient = quotient;
-+
-+ }
-+#else
-+ __asm__(".set\tnoreorder\n\t"
-+ ".set\tnoat\n\t"
-+ ".set\tmips3\n\t"
-+ "lwu\t%0,%2\n\t"
-+ "dsll32\t$1,%1,0\n\t"
-+ "or\t$1,$1,%0\n\t"
-+ "ddivu\t$0,$1,%3\n\t"
-+ "mflo\t$1\n\t"
-+ "dsll32\t%0,%4,0\n\t"
-+ "nop\n\t"
-+ "ddivu\t$0,%0,$1\n\t"
-+ "mflo\t%0\n\t"
-+ ".set\tmips0\n\t"
-+ ".set\tat\n\t"
-+ ".set\treorder"
-+ :"=&r" (quotient)
-+ :"r" (timerhi),
-+ "m" (timerlo),
-+ "r" (tmp),
-+ "r" (USECS_PER_JIFFY)
-+ :"$1");
-+ cached_quotient = quotient;
-+#endif
-+ }
-+
-+ /* Get last timer tick in absolute kernel time */
-+ count = read_c0_count();
-+
-+ /* .. relative to previous jiffy (32 bits is enough) */
-+ count -= timerlo;
-+
-+ __asm__("multu\t%1,%2\n\t"
-+ "mfhi\t%0"
-+ :"=r" (res)
-+ :"r" (count),
-+ "r" (quotient));
-+
-+ /*
-+ * Due to possible jiffies inconsistencies, we need to check
-+ * the result so that we'll get a timer that is monotonic.
-+ */
-+ if (res >= USECS_PER_JIFFY)
-+ res = USECS_PER_JIFFY-1;
-+
-+ return res;
-+}
-+
-+void do_gettimeofday(struct timeval *tv)
-+{
-+ unsigned int flags;
-+
-+ read_lock_irqsave (&xtime_lock, flags);
-+ tv->tv_sec = xtime.tv_sec;
-+ tv->tv_usec = xtime.tv_nsec/1000;
-+ tv->tv_usec += do_fast_gettimeoffset();
-+
-+ /*
-+ * xtime is atomically updated in timer_bh. jiffies - wall_jiffies
-+ * is nonzero if the timer bottom half hasnt executed yet.
-+ */
-+ if (jiffies - wall_jiffies)
-+ tv->tv_usec += USECS_PER_JIFFY;
-+
-+ read_unlock_irqrestore (&xtime_lock, flags);
-+
-+ if (tv->tv_usec >= 1000000) {
-+ tv->tv_usec -= 1000000;
-+ tv->tv_sec++;
-+ }
-+}
-+
-+EXPORT_SYMBOL(do_gettimeofday);
-+
-+int do_settimeofday(struct timespec *tv)
-+{
-+ write_lock_irq (&xtime_lock);
-+
-+ /* This is revolting. We need to set the xtime.tv_usec correctly.
-+ * However, the value in this location is is value at the last tick.
-+ * Discover what correction gettimeofday would have done, and then
-+ * undo it!
-+ */
-+ tv->tv_nsec -= do_fast_gettimeoffset()*NSEC_PER_USEC;
-+
-+ if (tv->tv_nsec < 0) {
-+ tv->tv_nsec += 1000000*NSEC_PER_USEC;
-+ tv->tv_sec--;
-+ }
-+
-+ xtime.tv_sec = tv->tv_sec;
-+ xtime.tv_nsec = tv->tv_nsec;
-+ time_adjust = 0; /* stop active adjtime() */
-+ time_status |= STA_UNSYNC;
-+ time_maxerror = NTP_PHASE_LIMIT;
-+ time_esterror = NTP_PHASE_LIMIT;
-+
-+ write_unlock_irq (&xtime_lock);
-+}
-+
-+EXPORT_SYMBOL(do_settimeofday);
-+
-+#endif
-diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/dbg_io.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c
---- linux-2.6.17/arch/mips/brcm-boards/generic/dbg_io.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,260 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#include <linux/config.h>
-+#include <linux/tty.h>
-+#include <linux/major.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/sched.h>
-+
-+#include <bcm_map_part.h>
-+
-+#undef PRNT /* define for debug printing */
-+
-+#define UART16550_BAUD_2400 2400
-+#define UART16550_BAUD_4800 4800
-+#define UART16550_BAUD_9600 9600
-+#define UART16550_BAUD_19200 19200
-+#define UART16550_BAUD_38400 38400
-+#define UART16550_BAUD_57600 57600
-+#define UART16550_BAUD_115200 115200
-+
-+#define UART16550_PARITY_NONE 0
-+#define UART16550_PARITY_ODD 0x08
-+#define UART16550_PARITY_EVEN 0x18
-+#define UART16550_PARITY_MARK 0x28
-+#define UART16550_PARITY_SPACE 0x38
-+
-+#define UART16550_DATA_5BIT 0x0
-+#define UART16550_DATA_6BIT 0x1
-+#define UART16550_DATA_7BIT 0x2
-+#define UART16550_DATA_8BIT 0x3
-+
-+#define UART16550_STOP_1BIT 0x0
-+#define UART16550_STOP_2BIT 0x4
-+
-+volatile Uart * stUart = UART_BASE;
-+
-+#define WRITE16(addr, value) ((*(volatile UINT16 *)((ULONG)&addr)) = value)
-+
-+/* Low level UART routines from promcon.c */
-+extern void prom_putc(char c);
-+extern char prom_getc(void);
-+extern int prom_getc_nowait(void);
-+extern int prom_testc(void);
-+
-+extern void set_debug_traps(void);
-+extern void breakpoint(void);
-+extern void enable_brcm_irq(unsigned int);
-+extern void set_async_breakpoint(unsigned int epc);
-+
-+#ifdef CONFIG_GDB_CONSOLE
-+extern void register_gdb_console(void);
-+#endif
-+
-+int gdb_initialized = 0;
-+
-+#define GDB_BUF_SIZE 512 /* power of 2, please */
-+
-+static char gdb_buf[GDB_BUF_SIZE] ;
-+static int gdb_buf_in_inx ;
-+static atomic_t gdb_buf_in_cnt ;
-+static int gdb_buf_out_inx ;
-+
-+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-+{
-+ /* Do nothing, assume boot loader has already set up serial port */
-+ printk("debugInit called\n");
-+}
-+
-+/*
-+ * Get a char if available, return -1 if nothing available.
-+ * Empty the receive buffer first, then look at the interface hardware.
-+ */
-+static int read_char(void)
-+{
-+ if (atomic_read(&gdb_buf_in_cnt) != 0) /* intr routine has q'd chars */
-+ {
-+ int chr ;
-+
-+ chr = gdb_buf[gdb_buf_out_inx++] ;
-+ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1) ;
-+ atomic_dec(&gdb_buf_in_cnt) ;
-+ return(chr) ;
-+ }
-+ return(prom_getc_nowait()) ; /* read from hardware */
-+} /* read_char */
-+
-+/*
-+ * This is the receiver interrupt routine for the GDB stub.
-+ * It will receive a limited number of characters of input
-+ * from the gdb host machine and save them up in a buffer.
-+ *
-+ * When the gdb stub routine getDebugChar() is called it
-+ * draws characters out of the buffer until it is empty and
-+ * then reads directly from the serial port.
-+ *
-+ * We do not attempt to write chars from the interrupt routine
-+ * since the stubs do all of that via putDebugChar() which
-+ * writes one byte after waiting for the interface to become
-+ * ready.
-+ *
-+ * The debug stubs like to run with interrupts disabled since,
-+ * after all, they run as a consequence of a breakpoint in
-+ * the kernel.
-+ *
-+ * Perhaps someone who knows more about the tty driver than I
-+ * care to learn can make this work for any low level serial
-+ * driver.
-+ */
-+static void gdb_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ int chr ;
-+ int more;
-+ do
-+ {
-+ chr = prom_getc_nowait() ;
-+ more = prom_testc();
-+ if (chr < 0) continue ;
-+
-+ /* If we receive a Ctrl-C then this is GDB trying to break in */
-+ if (chr == 3)
-+ {
-+ /* Replace current instruction with breakpoint */
-+ set_async_breakpoint(regs->cp0_epc);
-+ //breakpoint();
-+ }
-+
-+#ifdef PRNT
-+ printk("gdb_interrupt: chr=%02x '%c', more = %x\n",
-+ chr, chr > ' ' && chr < 0x7F ? chr : ' ', more) ;
-+#endif
-+
-+ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE)
-+ { /* buffer overflow, clear it */
-+ gdb_buf_in_inx = 0 ;
-+ atomic_set(&gdb_buf_in_cnt, 0) ;
-+ gdb_buf_out_inx = 0 ;
-+ break ;
-+ }
-+
-+ gdb_buf[gdb_buf_in_inx++] = chr ;
-+ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1) ;
-+ atomic_inc(&gdb_buf_in_cnt) ;
-+ }
-+ while (more !=0);
-+
-+} /* gdb_interrupt */
-+
-+/*
-+ * getDebugChar
-+ *
-+ * This is a GDB stub routine. It waits for a character from the
-+ * serial interface and then returns it. If there is no serial
-+ * interface connection then it returns a bogus value which will
-+ * almost certainly cause the system to hang.
-+ */
-+int getDebugChar(void)
-+{
-+ volatile int chr ;
-+
-+#ifdef PRNT
-+ printk("getDebugChar: ") ;
-+#endif
-+
-+ while ( (chr = read_char()) < 0 ) ;
-+
-+#ifdef PRNT
-+ printk("%c\n", chr > ' ' && chr < 0x7F ? chr : ' ') ;
-+#endif
-+ return(chr) ;
-+
-+} /* getDebugChar */
-+
-+/*
-+ * putDebugChar
-+ *
-+ * This is a GDB stub routine. It waits until the interface is ready
-+ * to transmit a char and then sends it. If there is no serial
-+ * interface connection then it simply returns to its caller, having
-+ * pretended to send the char.
-+ */
-+int putDebugChar(unsigned char chr)
-+{
-+#ifdef PRNT
-+ printk("putDebugChar: chr=%02x '%c'\n", chr,
-+ chr > ' ' && chr < 0x7F ? chr : ' ') ;
-+#endif
-+
-+ prom_putc(chr) ; /* this routine will wait */
-+ return 1;
-+
-+} /* putDebugChar */
-+
-+/* Just a NULL routine for testing. */
-+void gdb_null(void)
-+{
-+}
-+
-+void rs_kgdb_hook(int tty_no)
-+{
-+ printk("rs_kgdb_hook: tty %d\n", tty_no);
-+
-+ /* Call GDB routine to setup the exception vectors for the debugger */
-+ set_debug_traps();
-+
-+ printk("Breaking into debugger...\n");
-+ breakpoint();
-+ gdb_null() ;
-+ printk("Connected.\n");
-+
-+ gdb_initialized = 1;
-+
-+#ifdef CONFIG_GDB_CONSOLE
-+ register_gdb_console();
-+#endif
-+}
-+
-+void kgdb_hook_irq()
-+{
-+ int retval ;
-+ uint16 uMask;
-+
-+ printk("GDB: Hooking UART interrupt\n");
-+
-+ retval = request_irq(INTERRUPT_ID_UART,
-+ gdb_interrupt,
-+ SA_INTERRUPT,
-+ "GDB-stub", NULL);
-+
-+ if (retval != 0)
-+ printk("gdb_hook: request_irq(irq=%d) failed: %d\n", INTERRUPT_ID_UART, retval);
-+
-+ // Enable UART config Rx not empty IRQ
-+ uMask = READ16(stUart->intMask) ;
-+ // printk("intMask: 0x%x\n", uMask);
-+ WRITE16(stUart->intMask, uMask | RXFIFONE);
-+}
-+
-+
-diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/int-handler.S linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S
---- linux-2.6.17/arch/mips/brcm-boards/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,59 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/*
-+ * Generic interrupt handler for Broadcom MIPS boards
-+ */
-+
-+#include <linux/config.h>
-+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+/*
-+ * MIPS IRQ Source
-+ * -------- ------
-+ * 0 Software (ignored)
-+ * 1 Software (ignored)
-+ * 2 Combined hardware interrupt (hw0)
-+ * 3 Hardware
-+ * 4 Hardware
-+ * 5 Hardware
-+ * 6 Hardware
-+ * 7 R4k timer
-+ */
-+
-+ .text
-+ .set noreorder
-+ .set noat
-+ .align 5
-+ NESTED(brcmIRQ, PT_SIZE, sp)
-+ SAVE_ALL
-+ CLI
-+ .set noreorder
-+ .set at
-+
-+ jal brcm_irq_dispatch
-+ move a0, sp
-+
-+ j ret_from_irq
-+ nop
-+
-+ END(brcmIRQ)
-diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/Makefile linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/Makefile
---- linux-2.6.17/arch/mips/brcm-boards/generic/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/Makefile 2006-08-03 16:36:58.000000000 +0200
-@@ -0,0 +1,11 @@
-+#
-+# Makefile for generic Broadcom MIPS boards
-+#
-+# Copyright (C) 2001 Broadcom Corporation
-+#
-+obj-y := int-handler.o
-+
-+ifdef CONFIG_REMOTE_DEBUG
-+obj-y += dbg_io.o
-+endif
-+
diff --git a/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch b/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch
deleted file mode 100644
index 7d0936cb83..0000000000
--- a/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch
+++ /dev/null
@@ -1,438 +0,0 @@
-diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile linux-2.6.16.7-patched/arch/mips/pci/Makefile
---- linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile 2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7-patched/arch/mips/pci/Makefile 2006-07-05 15:21:58.000000000 +0200
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
- obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o
- obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
- obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
-+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
-diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c
---- linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,85 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+
-+#include <bcmpci.h>
-+#include <bcm_intr.h>
-+#include <bcm_map_part.h>
-+
-+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-+
-+static char irq_tab_bcm96348[] __initdata = {
-+ [0] = INTERRUPT_ID_MPI,
-+ [1] = INTERRUPT_ID_MPI,
-+#if defined(CONFIG_USB)
-+ [USB_HOST_SLOT] = INTERRUPT_ID_USBH
-+#endif
-+};
-+
-+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return irq_tab_bcm96348[slot];
-+}
-+
-+static void bcm96348_fixup(struct pci_dev *dev)
-+{
-+ uint32 memaddr;
-+ uint32 size;
-+
-+ memaddr = pci_resource_start(dev, 0);
-+ size = pci_resource_len(dev, 0);
-+
-+ switch (PCI_SLOT(dev->devfn)) {
-+ case 0:
-+ // UBUS to PCI address range
-+ // Memory Window 1. Mask determines which bits are decoded.
-+ mpi->l2pmrange1 = ~(size-1);
-+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
-+ // register.
-+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
-+ // UBUS to PCI Remap Address. Replaces the masked address bits in the
-+ // range register with this setting.
-+ // Also, enable direct I/O and direct Memory accesses
-+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
-+ break;
-+
-+ case 1:
-+ // Memory Window 2
-+ mpi->l2pmrange2 = ~(size-1);
-+ // UBUS to PCI Memory base address.
-+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
-+ // UBUS to PCI Remap Address
-+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
-+ break;
-+
-+#if defined(CONFIG_USB)
-+ case USB_HOST_SLOT:
-+ dev->resource[0].start = USB_HOST_BASE;
-+ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
-+ break;
-+#endif
-+ }
-+}
-+
-+struct pci_fixup pcibios_fixups[] = {
-+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
-+ {0}
-+};
-diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c
---- linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,276 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <asm/addrspace.h>
-+
-+#include <bcm_intr.h>
-+#include <bcm_map_part.h>
-+#include <bcmpci.h>
-+
-+#include <linux/delay.h>
-+
-+#if defined(CONFIG_USB)
-+#if 0
-+#define DPRINT(x...) printk(x)
-+#else
-+#define DPRINT(x...)
-+#endif
-+
-+static int
-+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
-+static int
-+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
-+
-+static bool usb_mem_size_rd = FALSE;
-+static uint32 usb_mem_base = 0;
-+static uint32 usb_cfg_space_cmd_reg = 0;
-+#endif
-+static bool pci_mem_size_rd = FALSE;
-+
-+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-+
-+static void mpi_SetupPciConfigAccess(uint32 addr)
-+{
-+ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
-+}
-+
-+static void mpi_ClearPciConfigAccess(void)
-+{
-+ mpi->l2pcfgctl = 0x00000000;
-+}
-+
-+#if defined(CONFIG_USB)
-+/* --------------------------------------------------------------------------
-+ Name: pci63xx_int_write
-+Abstract: PCI Config write on internal device(s)
-+ -------------------------------------------------------------------------- */
-+static int
-+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
-+{
-+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-+ return PCIBIOS_SUCCESSFUL;
-+ }
-+
-+ switch (size) {
-+ case 1:
-+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ break;
-+ case 2:
-+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ switch (where) {
-+ case PCI_COMMAND:
-+ usb_cfg_space_cmd_reg = *value;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 4:
-+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ switch (where) {
-+ case PCI_BASE_ADDRESS_0:
-+ if (*value == 0xffffffff) {
-+ usb_mem_size_rd = TRUE;
-+ } else {
-+ usb_mem_base = *value;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+/* --------------------------------------------------------------------------
-+ Name: pci63xx_int_read
-+Abstract: PCI Config read on internal device(s)
-+ -------------------------------------------------------------------------- */
-+static int
-+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
-+{
-+ uint32 retValue = 0xFFFFFFFF;
-+
-+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-+ return PCIBIOS_SUCCESSFUL;
-+ }
-+
-+ // For now, this is specific to the USB Host controller. We can
-+ // make it more general if we have to...
-+ // Emulate PCI Config accesses
-+ switch (where) {
-+ case PCI_VENDOR_ID:
-+ case PCI_DEVICE_ID:
-+ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
-+ break;
-+ case PCI_COMMAND:
-+ case PCI_STATUS:
-+ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
-+ break;
-+ case PCI_CLASS_REVISION:
-+ case PCI_CLASS_DEVICE:
-+ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
-+ break;
-+ case PCI_BASE_ADDRESS_0:
-+ if (usb_mem_size_rd) {
-+ retValue = USB_BAR0_MEM_SIZE;
-+ } else {
-+ if (usb_mem_base != 0)
-+ retValue = usb_mem_base;
-+ else
-+ retValue = USB_HOST_BASE;
-+ }
-+ usb_mem_size_rd = FALSE;
-+ break;
-+ case PCI_CACHE_LINE_SIZE:
-+ case PCI_LATENCY_TIMER:
-+ retValue = 0;
-+ break;
-+ case PCI_HEADER_TYPE:
-+ retValue = PCI_HEADER_TYPE_NORMAL;
-+ break;
-+ case PCI_SUBSYSTEM_VENDOR_ID:
-+ retValue = PCI_VENDOR_ID_BROADCOM;
-+ break;
-+ case PCI_SUBSYSTEM_ID:
-+ retValue = 0x6300;
-+ break;
-+ case PCI_INTERRUPT_LINE:
-+ retValue = INTERRUPT_ID_USBH;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ switch (size) {
-+ case 1:
-+ *value = (retValue >> ((where & 3) << 3)) & 0xff;
-+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ break;
-+ case 2:
-+ *value = (retValue >> ((where & 3) << 3)) & 0xffff;
-+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ break;
-+ case 4:
-+ *value = retValue;
-+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n",
-+ PCI_SLOT(devfn), where, size, *value);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+#endif
-+
-+static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 * val)
-+{
-+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-+ uint32 data;
-+
-+#if defined(CONFIG_USB)
-+ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-+ return pci63xx_int_read(devfn, where, val, size);
-+#endif
-+
-+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-+ data = *(uint32 *)ioBase;
-+ switch(size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ /* Special case for reading PCI device range */
-+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-+ if (pci_mem_size_rd) {
-+ /* bcm6348 PCI memory window minimum size is 64K */
-+ *val &= PCI_SIZE_64K;
-+ }
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+ pci_mem_size_rd = FALSE;
-+ mpi_ClearPciConfigAccess();
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-+ uint32 data;
-+
-+#if defined(CONFIG_USB)
-+ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-+ return pci63xx_int_write(devfn, where, &val, size);
-+#endif
-+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-+ data = *(uint32 *)ioBase;
-+ switch(size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ /* Special case for reading PCI device range */
-+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-+ if (val == 0xffffffff)
-+ pci_mem_size_rd = TRUE;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+ *(uint32 *)ioBase = data;
-+ udelay(500);
-+ mpi_ClearPciConfigAccess();
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+struct pci_ops bcm96348_pci_ops = {
-+ .read = bcm96348_pcibios_read,
-+ .write = bcm96348_pcibios_write
-+};
-diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c
---- linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,54 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+
-+#include <asm/pci_channel.h>
-+#include <bcmpci.h>
-+
-+static struct resource bcm_pci_io_resource = {
-+ .name = "bcm96348 pci IO space",
-+ .start = BCM_PCI_IO_BASE,
-+ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
-+ .flags = IORESOURCE_IO
-+};
-+
-+static struct resource bcm_pci_mem_resource = {
-+ .name = "bcm96348 pci memory space",
-+ .start = BCM_PCI_MEM_BASE,
-+ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
-+ .flags = IORESOURCE_MEM
-+};
-+
-+extern struct pci_ops bcm96348_pci_ops;
-+
-+struct pci_controller bcm96348_controller = {
-+ .pci_ops = &bcm96348_pci_ops,
-+ .io_resource = &bcm_pci_io_resource,
-+ .mem_resource = &bcm_pci_mem_resource,
-+};
-+
-+static void bcm96348_pci_init(void)
-+{
-+ register_pci_controller(&bcm96348_controller);
-+}
-+
-+arch_initcall(bcm96348_pci_init);
diff --git a/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch b/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch
deleted file mode 100644
index 8efe11fcd6..0000000000
--- a/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- linux-2.6.17/include/asm-mips/bootinfo.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/include/asm-mips/bootinfo.h 2006-07-13 19:14:01.000000000 +0200
-@@ -218,6 +218,14 @@
- #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
- #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
-
-+/*
-+ * Valid machtype for group BRCM
-+ */
-+#define MACH_GROUP_BRCM 23 /* Broadcom boards */
-+#define MACH_BCM96338 0
-+#define MACH_BCM96345 1
-+#define MACH_BCM96348 2
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
---- linux-2.6.17/include/asm-mips/cpu.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/include/asm-mips/cpu.h 2006-07-13 19:15:17.000000000 +0200
-@@ -103,6 +103,13 @@
-
- #define PRID_IMP_SR71000 0x0400
-
-+/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
-+ */
-+
-+#define PRID_IMP_BCM6338 0x9000
-+#define PRID_IMP_BCM6345 0x8000
-+#define PRID_IMP_BCM6348 0x9100
-+
- /*
- * Definitions for 7:0 on legacy processors
- */
-@@ -200,7 +207,10 @@
- #define CPU_SB1A 62
- #define CPU_74K 63
- #define CPU_R14000 64
--#define CPU_LAST 64
-+#define CPU_BCM6338 65
-+#define CPU_BCM6345 66
-+#define CPU_BCM6348 67
-+#define CPU_LAST 67
-
- /*
- * ISA Level encodings
---- linux-2.6.17/include/asm-mips/mach-generic/param.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/include/asm-mips/mach-generic/param.h 2006-07-13 19:17:26.000000000 +0200
-@@ -8,6 +8,6 @@
- #ifndef __ASM_MACH_GENERIC_PARAM_H
- #define __ASM_MACH_GENERIC_PARAM_H
-
--#define HZ 1000 /* Internal kernel timer frequency */
-+#define HZ 200 /* Internal kernel timer frequency */
-
- #endif /* __ASM_MACH_GENERIC_PARAM_H */
---- linux-2.6.17/include/asm-mips/module.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-brcm63xx/include/asm-mips/module.h 2006-07-13 19:18:34.000000000 +0200
-@@ -113,6 +113,12 @@
- #define MODULE_PROC_FAMILY "RM9000 "
- #elif defined CONFIG_CPU_SB1
- #define MODULE_PROC_FAMILY "SB1 "
-+#elif defined CONFIG_CPU_BCM6338
-+#define MODULE_PROC_FAMILY "BCM6338 "
-+#elif defined CONFIG_CPU_BCM6345
-+#define MODULE_PROC_FAMILY "BCM6345 "
-+#elif defined CONFIG_CPU_BCM6348
-+#define MODULE_PROC_FAMILY "BCM6348 "
- #else
- #error MODULE_PROC_FAMILY undefined for your processor configuration
- #endif
diff --git a/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch
deleted file mode 100644
index ad0cbbba56..0000000000
--- a/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-diff -Naurp linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
---- linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,36 @@
-+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 4
-+#define cpu_has_4ktlb 8
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 0x40
-+#define cpu_has_watch 0
-+#define cpu_has_mips16 0
-+#define cpu_has_divec 0x200
-+#define cpu_has_vce 0
-+#define cpu_has_cache_cdex_p 0
-+#define cpu_has_cache_cdex_s 0
-+#define cpu_has_prefetch 0x40000
-+#define cpu_has_mcheck 0x2000
-+#define cpu_has_ejtag 0x4000
-+#define cpu_has_llsc 0x10000
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 0
-+#define cpu_has_ic_fills_f_dc 0
-+
-+#define cpu_has_nofpuex 0
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+#define cpu_has_subset_pcaches 0
-+
-+#define cpu_dcache_line_size() 16
-+#define cpu_icache_line_size() 16
-+#define cpu_scache_line_size() 0
-+
-+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch b/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch
deleted file mode 100644
index 5d6d6c9205..0000000000
--- a/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch
+++ /dev/null
@@ -1,3226 +0,0 @@
-diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c
---- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,1056 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+/* Description: Serial port driver for the BCM963XX. */
-+
-+#define CARDNAME "bcm963xx_serial driver"
-+#define VERSION "2.0"
-+#define VER_STR CARDNAME " v" VERSION "\n"
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+
-+/* for definition of struct console */
-+#include <linux/console.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/serial.h>
-+#include <asm/uaccess.h>
-+
-+#include <bcmtypes.h>
-+#include <board.h>
-+#include <bcm_map_part.h>
-+#include <bcm_intr.h>
-+
-+static DEFINE_SPINLOCK(bcm963xx_serial_lock);
-+
-+extern void _putc(char);
-+extern void _puts(const char *);
-+
-+typedef struct bcm_serial {
-+ volatile Uart * port;
-+ int type;
-+ int flags;
-+ int irq;
-+ int baud_base;
-+ int blocked_open;
-+ unsigned short close_delay;
-+ unsigned short closing_wait;
-+ unsigned short line; /* port/line number */
-+ unsigned short cflags; /* line configuration flag */
-+ unsigned short x_char; /* xon/xoff character */
-+ unsigned short read_status_mask; /* mask for read condition */
-+ unsigned short ignore_status_mask; /* mask for ignore condition */
-+ unsigned long event; /* mask used in BH */
-+ int xmit_head; /* Position of the head */
-+ int xmit_tail; /* Position of the tail */
-+ int xmit_cnt; /* Count of the chars in the buffer */
-+ int count; /* indicates how many times it has been opened */
-+ int magic;
-+
-+ struct async_icount icount; /* keep track of things ... */
-+ struct tty_struct *tty; /* tty associated */
-+ struct termios normal_termios;
-+
-+ wait_queue_head_t open_wait;
-+ wait_queue_head_t close_wait;
-+
-+ long session; /* Session of opening process */
-+ long pgrp; /* pgrp of opening process */
-+
-+ unsigned char is_initialized;
-+} Context;
-+
-+
-+/*---------------------------------------------------------------------*/
-+/* Define bits in the Interrupt Enable register */
-+/*---------------------------------------------------------------------*/
-+/* Enable receive interrupt */
-+#define RXINT (RXFIFONE|RXOVFERR)
-+
-+/* Enable transmit interrupt */
-+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
-+
-+/* Enable receiver line status interrupt */
-+#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
-+
-+#define BCM_NUM_UARTS 1
-+
-+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
-+
-+
-+static struct bcm_serial multi[BCM_NUM_UARTS];
-+static struct bcm_serial *lines[BCM_NUM_UARTS];
-+static struct tty_driver serial_driver;
-+static struct tty_struct *serial_table[BCM_NUM_UARTS];
-+static struct termios *serial_termios[BCM_NUM_UARTS];
-+static struct termios *serial_termios_locked[BCM_NUM_UARTS];
-+static int serial_refcount;
-+
-+
-+static void bcm_stop (struct tty_struct *tty);
-+static void bcm_start (struct tty_struct *tty);
-+static inline void receive_chars (struct bcm_serial * info);
-+static int startup (struct bcm_serial *info);
-+static void shutdown (struct bcm_serial * info);
-+static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
-+static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
-+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
-+ const unsigned char *buf, int count);
-+static int bcm63xx_cons_write_room (struct tty_struct *tty);
-+static int bcm_chars_in_buffer (struct tty_struct *tty);
-+static void bcm_flush_buffer (struct tty_struct *tty);
-+static void bcm_throttle (struct tty_struct *tty);
-+static void bcm_unthrottle (struct tty_struct *tty);
-+static void bcm_send_xchar (struct tty_struct *tty, char ch);
-+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
-+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
-+static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
-+static void send_break (struct bcm_serial *info, int duration);
-+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
-+ unsigned int cmd, unsigned long arg);
-+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
-+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
-+static void bcm_hangup (struct tty_struct *tty);
-+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
-+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
-+static int __init bcm63xx_serialinit(void);
-+
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_stop () and rs_start ()
-+ *
-+ * These routines are called before setting or resetting
-+ * tty->stopped. They enable or disable transmitter interrupts,
-+ * as necessary.
-+ * ------------------------------------------------------------
-+ */
-+static void bcm_stop (struct tty_struct *tty)
-+{
-+}
-+
-+static void bcm_start (struct tty_struct *tty)
-+{
-+ _puts(CARDNAME " Start\n");
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * receive_char ()
-+ *
-+ * This routine deals with inputs from any lines.
-+ * ------------------------------------------------------------
-+ */
-+static inline void receive_chars (struct bcm_serial * info)
-+{
-+ struct tty_struct *tty = 0;
-+ struct async_icount * icount;
-+ int ignore = 0;
-+ unsigned short status, tmp;
-+ UCHAR ch = 0;
-+ while ((status = info->port->intStatus) & RXINT)
-+ {
-+ char flag_char = 0;
-+
-+ if (status & RXFIFONE)
-+ ch = info->port->Data; // Read the character
-+ tty = info->tty; /* now tty points to the proper dev */
-+ icount = &info->icount;
-+ if (! tty)
-+ break;
-+ if (!tty_buffer_request_room(tty, 1))
-+ break;
-+ icount->rx++;
-+ if (status & RXBRK)
-+ {
-+ flag_char = TTY_BREAK;
-+ icount->brk++;
-+ }
-+ // keep track of the statistics
-+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
-+ {
-+ if (status & RXPARERR) /* parity error */
-+ icount->parity++;
-+ else
-+ if (status & RXFRAMERR) /* frame error */
-+ icount->frame++;
-+ if (status & RXOVFERR)
-+ {
-+ // Overflow. Reset the RX FIFO
-+ info->port->fifoctl |= RSTRXFIFOS;
-+ icount->overrun++;
-+ }
-+ // check to see if we should ignore the character
-+ // and mask off conditions that should be ignored
-+ if (status & info->ignore_status_mask)
-+ {
-+ if (++ignore > 100 )
-+ break;
-+ goto ignore_char;
-+ }
-+ // Mask off the error conditions we want to ignore
-+ tmp = status & info->read_status_mask;
-+ if (tmp & RXPARERR)
-+ {
-+ flag_char = TTY_PARITY;
-+ }
-+ else
-+ if (tmp & RXFRAMERR)
-+ {
-+ flag_char = TTY_FRAME;
-+ }
-+ if (tmp & RXOVFERR)
-+ {
-+ tty_insert_flip_char(tty, ch, flag_char);
-+ ch = 0;
-+ flag_char = TTY_OVERRUN;
-+ if (!tty_buffer_request_room(tty, 1))
-+ break;
-+ }
-+ }
-+ tty_insert_flip_char(tty, ch, flag_char);
-+ }
-+ignore_char:
-+ if (tty)
-+ tty_flip_buffer_push(tty);
-+}
-+
-+
-+/*
-+ * ------------------------------------------------------------
-+ * bcm_interrupt ()
-+ *
-+ * this is the main interrupt routine for the chip.
-+ * It deals with the multiple ports.
-+ * ------------------------------------------------------------
-+ */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
-+#else
-+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
-+#endif
-+{
-+ struct bcm_serial * info = lines[0];
-+ UINT16 intStat;
-+
-+ /* get pending interrupt flags from UART */
-+
-+ /* Mask with only the serial interrupts that are enabled */
-+ intStat = info->port->intStatus & info->port->intMask;
-+ while (intStat)
-+ {
-+ if (intStat & RXINT)
-+ receive_chars (info);
-+ else
-+ if (intStat & TXINT)
-+ info->port->intStatus = TXINT;
-+ else /* don't know what it was, so let's mask it */
-+ info->port->intMask &= ~intStat;
-+
-+ intStat = info->port->intStatus & info->port->intMask;
-+ }
-+
-+ // Clear the interrupt
-+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ return IRQ_HANDLED;
-+#endif
-+}
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * startup ()
-+ *
-+ * various initialization tasks
-+ * -------------------------------------------------------------------
-+ */
-+static int startup (struct bcm_serial *info)
-+{
-+ // Port is already started...
-+ return 0;
-+}
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * shutdown ()
-+ *
-+ * This routine will shutdown a serial port; interrupts are disabled, and
-+ * DTR is dropped if the hangup on close termio flag is on.
-+ * -------------------------------------------------------------------
-+ */
-+static void shutdown (struct bcm_serial * info)
-+{
-+ unsigned long flags;
-+ if (!info->is_initialized)
-+ return;
-+
-+
-+ /*save_flags (flags);
-+ cli ();*/
-+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-+
-+ info->port->control &= ~(BRGEN|TXEN|RXEN);
-+ if (info->tty)
-+ set_bit (TTY_IO_ERROR, &info->tty->flags);
-+ info->is_initialized = 0;
-+
-+ //restore_flags (flags);
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+}
-+/*
-+ * -------------------------------------------------------------------
-+ * change_speed ()
-+ *
-+ * Set the baud rate, character size, parity and stop bits.
-+ * -------------------------------------------------------------------
-+ */
-+static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
-+{
-+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
-+ /*save_flags(ulFlags);
-+ cli();*/
-+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
-+
-+ switch( cFlag & (CBAUD | CBAUDEX) )
-+ {
-+ case B115200:
-+ ulBaud = 115200;
-+ break;
-+ case B57600:
-+ ulBaud = 57600;
-+ break;
-+ case B38400:
-+ ulBaud = 38400;
-+ break;
-+ case B19200:
-+ ulBaud = 19200;
-+ break;
-+ case B9600:
-+ ulBaud = 9600;
-+ break;
-+ case B4800:
-+ ulBaud = 4800;
-+ break;
-+ case B2400:
-+ ulBaud = 2400;
-+ break;
-+ case B1800:
-+ ulBaud = 1800;
-+ break;
-+ case B1200:
-+ ulBaud = 1200;
-+ break;
-+ case B600:
-+ ulBaud = 600;
-+ break;
-+ case B300:
-+ ulBaud = 300;
-+ break;
-+ case B200:
-+ ulBaud = 200;
-+ break;
-+ case B150:
-+ ulBaud = 150;
-+ break;
-+ case B134:
-+ ulBaud = 134;
-+ break;
-+ case B110:
-+ ulBaud = 110;
-+ break;
-+ case B75:
-+ ulBaud = 75;
-+ break;
-+ case B50:
-+ ulBaud = 50;
-+ break;
-+ default:
-+ ulBaud = 115200;
-+ break;
-+ }
-+
-+ /* Calculate buad rate. */
-+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
-+ ulTmp = (ulClockFreqHz / ulBaud) / 16;
-+ if( ulTmp & 0x01 )
-+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
-+ else
-+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
-+ pUart->baudword = ulTmp;
-+
-+ /* Set character size, stop bits and parity. */
-+ switch( cFlag & CSIZE )
-+ {
-+ case CS5:
-+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
-+ break;
-+ case CS6:
-+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
-+ break;
-+ case CS7:
-+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
-+ break;
-+ /*case CS8:*/
-+ default:
-+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
-+ break;
-+ }
-+ if( cFlag & CSTOPB )
-+ ulTmp |= TWOSTOP; /* select 2 stop bits */
-+ else
-+ ulTmp |= ONESTOP; /* select one stop bit */
-+
-+ /* Write these values into the config reg. */
-+ pUart->config = ulTmp;
-+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
-+ switch( cFlag & (PARENB | PARODD) )
-+ {
-+ case PARENB|PARODD:
-+ pUart->control |= RXPARITYEN | TXPARITYEN;
-+ break;
-+ case PARENB:
-+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
-+ break;
-+ default:
-+ pUart->control |= 0;
-+ break;
-+ }
-+
-+ /* Reset and flush uart */
-+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
-+ //restore_flags( ulFlags );
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
-+}
-+
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * bcm_flush_char ()
-+ *
-+ * Nothing to flush. Polled I/O is used.
-+ * -------------------------------------------------------------------
-+ */
-+static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
-+{
-+}
-+
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * bcm63xx_cons_write ()
-+ *
-+ * Main output routine using polled I/O.
-+ * -------------------------------------------------------------------
-+ */
-+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
-+ const unsigned char *buf, int count)
-+{
-+ int c;
-+
-+ for (c = 0; c < count; c++)
-+ _putc(buf[c]);
-+ return count;
-+}
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * bcm63xx_cons_write_room ()
-+ *
-+ * Compute the amount of space available for writing.
-+ * -------------------------------------------------------------------
-+ */
-+static int bcm63xx_cons_write_room (struct tty_struct *tty)
-+{
-+ /* Pick a number. Any number. Polled I/O is used. */
-+ return 1024;
-+}
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * bcm_chars_in_buffer ()
-+ *
-+ * compute the amount of char left to be transmitted
-+ * -------------------------------------------------------------------
-+ */
-+static int bcm_chars_in_buffer (struct tty_struct *tty)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * bcm_flush_buffer ()
-+ *
-+ * Empty the output buffer
-+ * -------------------------------------------------------------------
-+ */
-+static void bcm_flush_buffer (struct tty_struct *tty)
-+{
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * bcm_throttle () and bcm_unthrottle ()
-+ *
-+ * This routine is called by the upper-layer tty layer to signal that
-+ * incoming characters should be throttled (or not).
-+ * ------------------------------------------------------------
-+ */
-+static void bcm_throttle (struct tty_struct *tty)
-+{
-+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
-+ if (I_IXOFF(tty))
-+ info->x_char = STOP_CHAR(tty);
-+}
-+
-+static void bcm_unthrottle (struct tty_struct *tty)
-+{
-+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
-+ if (I_IXOFF(tty))
-+ {
-+ if (info->x_char)
-+ info->x_char = 0;
-+ else
-+ info->x_char = START_CHAR(tty);
-+ }
-+}
-+
-+static void bcm_send_xchar (struct tty_struct *tty, char ch)
-+{
-+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
-+ info->x_char = ch;
-+ if (ch)
-+ bcm_start (info->tty);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_ioctl () and friends
-+ * ------------------------------------------------------------
-+ */
-+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
-+{
-+ struct serial_struct tmp;
-+
-+ if (!retinfo)
-+ return -EFAULT;
-+
-+ memset (&tmp, 0, sizeof(tmp));
-+ tmp.type = info->type;
-+ tmp.line = info->line;
-+ tmp.port = (int) info->port;
-+ tmp.irq = info->irq;
-+ tmp.flags = 0;
-+ tmp.baud_base = info->baud_base;
-+ tmp.close_delay = info->close_delay;
-+ tmp.closing_wait = info->closing_wait;
-+
-+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
-+}
-+
-+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
-+{
-+ struct serial_struct new_serial;
-+ struct bcm_serial old_info;
-+ int retval = 0;
-+
-+ if (!new_info)
-+ return -EFAULT;
-+
-+ copy_from_user (&new_serial, new_info, sizeof(new_serial));
-+ old_info = *info;
-+
-+ if (!capable(CAP_SYS_ADMIN))
-+ return -EPERM;
-+
-+
-+ if (info->count > 1)
-+ return -EBUSY;
-+
-+ /* OK, past this point, all the error checking has been done.
-+ * At this point, we start making changes.....
-+ */
-+ info->baud_base = new_serial.baud_base;
-+ info->type = new_serial.type;
-+ info->close_delay = new_serial.close_delay;
-+ info->closing_wait = new_serial.closing_wait;
-+ retval = startup (info);
-+ return retval;
-+}
-+
-+/*
-+ * get_lsr_info - get line status register info
-+ *
-+ * Purpose: Let user call ioctl() to get info when the UART physically
-+ * is emptied. On bus types like RS485, the transmitter must
-+ * release the bus after transmitting. This must be done when
-+ * the transmit shift register is empty, not be done when the
-+ * transmit holding register is empty. This functionality
-+ * allows an RS485 driver to be written in user space.
-+ */
-+static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
-+{
-+ return( 0 );
-+}
-+
-+/*
-+ * This routine sends a break character out the serial port.
-+ */
-+static void send_break (struct bcm_serial *info, int duration)
-+{
-+ unsigned long flags;
-+
-+ if (!info->port)
-+ return;
-+
-+ current->state = TASK_INTERRUPTIBLE;
-+
-+ /*save_flags (flags);
-+ cli();*/
-+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-+
-+ info->port->control |= XMITBREAK;
-+ schedule_timeout(duration);
-+ info->port->control &= ~XMITBREAK;
-+
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+ //restore_flags (flags);
-+}
-+
-+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int error;
-+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
-+ int retval;
-+
-+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
-+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
-+ {
-+ if (tty->flags & (1 << TTY_IO_ERROR))
-+ return -EIO;
-+ }
-+ switch (cmd)
-+ {
-+
-+ case TCSBRK: /* SVID version: non-zero arg --> no break */
-+ retval = tty_check_change (tty);
-+ if (retval)
-+ return retval;
-+ tty_wait_until_sent (tty, 0);
-+ if (!arg)
-+ send_break (info, HZ/4); /* 1/4 second */
-+ return 0;
-+
-+ case TCSBRKP: /* support for POSIX tcsendbreak() */
-+ retval = tty_check_change (tty);
-+ if (retval)
-+ return retval;
-+ tty_wait_until_sent (tty, 0);
-+ send_break (info, arg ? arg*(HZ/10) : HZ/4);
-+ return 0;
-+
-+ case TIOCGSOFTCAR:
-+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
-+ if (!error)
-+ return -EFAULT;
-+ else
-+ {
-+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
-+ return 0;
-+ }
-+
-+ case TIOCSSOFTCAR:
-+ error = get_user (arg, (unsigned long *)arg);
-+ if (error)
-+ return error;
-+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
-+ return 0;
-+
-+ case TIOCGSERIAL:
-+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
-+ if (!error)
-+ return -EFAULT;
-+ else
-+ return get_serial_info (info, (struct serial_struct *)arg);
-+
-+ case TIOCSSERIAL:
-+ return set_serial_info (info, (struct serial_struct *) arg);
-+
-+ case TIOCSERGETLSR: /* Get line status register */
-+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
-+ if (!error)
-+ return -EFAULT;
-+ else
-+ return get_lsr_info (info, (unsigned int *)arg);
-+
-+ case TIOCSERGSTRUCT:
-+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
-+ if (!error)
-+ return -EFAULT;
-+ else
-+ {
-+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
-+ return 0;
-+ }
-+
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+ return 0;
-+}
-+
-+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
-+{
-+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
-+
-+ if( tty->termios->c_cflag != old_termios->c_cflag )
-+ change_speed (info->port, tty->termios->c_cflag);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * bcm63xx_cons_close()
-+ *
-+ * This routine is called when the serial port gets closed. First, we
-+ * wait for the last remaining data to be sent. Then, we turn off
-+ * the transmit enable and receive enable flags.
-+ * ------------------------------------------------------------
-+ */
-+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
-+{
-+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (!info)
-+ return;
-+
-+ /*save_flags (flags);
-+ cli();*/
-+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-+
-+ if (tty_hung_up_p (filp))
-+ {
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+ //restore_flags (flags);
-+ return;
-+ }
-+
-+ if ((tty->count == 1) && (info->count != 1))
-+ {
-+
-+ /* Uh, oh. tty->count is 1, which means that the tty
-+ * structure will be freed. Info->count should always
-+ * be one in these conditions. If it's greater than
-+ * one, we've got real problems, since it means the
-+ * serial port won't be shutdown.
-+ */
-+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
-+ "info->count is %d\n", info->count);
-+ info->count = 1;
-+ }
-+
-+ if (--info->count < 0)
-+ {
-+ printk("ds_close: bad serial port count for ttys%d: %d\n",
-+ info->line, info->count);
-+ info->count = 0;
-+ }
-+
-+ if (info->count)
-+ {
-+ //restore_flags (flags);
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+ return;
-+ }
-+
-+ /* Now we wait for the transmit buffer to clear; and we notify
-+ * the line discipline to only process XON/XOFF characters.
-+ */
-+ tty->closing = 1;
-+
-+ /* At this point we stop accepting input. To do this, we
-+ * disable the receive line status interrupts.
-+ */
-+ shutdown (info);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ if (tty->driver->flush_buffer)
-+ tty->driver->flush_buffer (tty);
-+#else
-+ if (tty->driver.flush_buffer)
-+ tty->driver.flush_buffer (tty);
-+#endif
-+ if (tty->ldisc.flush_buffer)
-+ tty->ldisc.flush_buffer (tty);
-+
-+ tty->closing = 0;
-+ info->event = 0;
-+ info->tty = 0;
-+ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
-+ {
-+ if (tty->ldisc.close)
-+ (tty->ldisc.close)(tty);
-+ tty->ldisc = *tty_ldisc_get(N_TTY);
-+ tty->termios->c_line = N_TTY;
-+ if (tty->ldisc.open)
-+ (tty->ldisc.open)(tty);
-+ }
-+ if (info->blocked_open)
-+ {
-+ if (info->close_delay)
-+ {
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule_timeout(info->close_delay);
-+ }
-+ wake_up_interruptible (&info->open_wait);
-+ }
-+ wake_up_interruptible (&info->close_wait);
-+
-+ //restore_flags (flags);
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+}
-+
-+/*
-+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
-+ */
-+static void bcm_hangup (struct tty_struct *tty)
-+{
-+
-+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
-+
-+ shutdown (info);
-+ info->event = 0;
-+ info->count = 0;
-+ info->tty = 0;
-+ wake_up_interruptible (&info->open_wait);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_open() and friends
-+ * ------------------------------------------------------------
-+ */
-+static int block_til_ready (struct tty_struct *tty, struct file *filp,
-+ struct bcm_serial *info)
-+{
-+ return 0;
-+}
-+
-+/*
-+ * This routine is called whenever a serial port is opened. It
-+ * enables interrupts for a serial port. It also performs the
-+ * serial-specific initialization for the tty structure.
-+ */
-+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
-+{
-+ struct bcm_serial *info;
-+ int retval, line;
-+
-+ // Make sure we're only opening on of the ports we support
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
-+#else
-+ line = MINOR(tty->device) - tty->driver.minor_start;
-+#endif
-+
-+ if ((line < 0) || (line >= BCM_NUM_UARTS))
-+ return -ENODEV;
-+
-+ info = lines[line];
-+
-+ info->port->intMask = 0; /* Clear any pending interrupts */
-+ info->port->intMask = RXINT; /* Enable RX */
-+
-+ info->count++;
-+ tty->driver_data = info;
-+ info->tty = tty;
-+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
-+
-+ // Start up serial port
-+ retval = startup (info);
-+ if (retval)
-+ return retval;
-+
-+ retval = block_til_ready (tty, filp, info);
-+ if (retval)
-+ return retval;
-+
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ info->pgrp = process_group(current);
-+ info->session = current->signal->session;
-+#else
-+ info->session = current->session;
-+ info->pgrp = current->pgrp;
-+#endif
-+
-+ return 0;
-+}
-+
-+/* --------------------------------------------------------------------------
-+ Name: bcm63xx_serialinit
-+ Purpose: Initialize our BCM63xx serial driver
-+-------------------------------------------------------------------------- */
-+static int __init bcm63xx_serialinit(void)
-+{
-+ int i, flags;
-+ struct bcm_serial * info;
-+
-+ // Print the driver version information
-+ printk(VER_STR);
-+
-+ memset(&serial_driver, 0, sizeof(struct tty_driver));
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ serial_driver.owner = THIS_MODULE;
-+ serial_driver.devfs_name = "tts/";
-+#endif
-+ serial_driver.magic = TTY_DRIVER_MAGIC;
-+ serial_driver.name = "ttyS";
-+ serial_driver.major = TTY_MAJOR;
-+ serial_driver.minor_start = 64;
-+ serial_driver.num = BCM_NUM_UARTS;
-+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
-+ serial_driver.subtype = SERIAL_TYPE_NORMAL;
-+ serial_driver.init_termios = tty_std_termios;
-+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
-+ serial_driver.flags = TTY_DRIVER_REAL_RAW;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ serial_driver.refcount = serial_refcount;
-+ serial_driver.ttys = serial_table;
-+#else
-+ serial_driver.refcount = &serial_refcount;
-+ serial_driver.table = serial_table;
-+#endif
-+
-+ serial_driver.termios = serial_termios;
-+ serial_driver.termios_locked = serial_termios_locked;
-+ serial_driver.open = bcm63xx_cons_open;
-+ serial_driver.close = bcm63xx_cons_close;
-+ serial_driver.write = bcm63xx_cons_write;
-+ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
-+ serial_driver.write_room = bcm63xx_cons_write_room;
-+ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
-+ serial_driver.flush_buffer = bcm_flush_buffer;
-+ serial_driver.ioctl = bcm_ioctl;
-+ serial_driver.throttle = bcm_throttle;
-+ serial_driver.unthrottle = bcm_unthrottle;
-+ serial_driver.send_xchar = bcm_send_xchar;
-+ serial_driver.set_termios = bcm_set_termios;
-+ serial_driver.stop = bcm_stop;
-+ serial_driver.start = bcm_start;
-+ serial_driver.hangup = bcm_hangup;
-+
-+ if (tty_register_driver (&serial_driver))
-+ panic("Couldn't register serial driver\n");
-+
-+ //save_flags(flags); cli();
-+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-+
-+ for (i = 0; i < BCM_NUM_UARTS; i++)
-+ {
-+ info = &multi[i];
-+ lines[i] = info;
-+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
-+ info->irq = (2 - i) + 8;
-+ info->line = i;
-+ info->tty = 0;
-+ info->close_delay = 50;
-+ info->closing_wait = 3000;
-+ info->x_char = 0;
-+ info->event = 0;
-+ info->count = 0;
-+ info->blocked_open = 0;
-+ info->normal_termios = serial_driver.init_termios;
-+ init_waitqueue_head(&info->open_wait);
-+ init_waitqueue_head(&info->close_wait);
-+
-+ /* If we are pointing to address zero then punt - not correctly
-+ * set up in setup.c to handle this.
-+ */
-+ if (! info->port)
-+ return 0;
-+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
-+ }
-+
-+ /* order matters here... the trick is that flags
-+ * is updated... in request_irq - to immediatedly obliterate
-+ * it is unwise.
-+ */
-+ //restore_flags(flags);
-+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-+ return 0;
-+}
-+
-+module_init(bcm63xx_serialinit);
-+
-+/* --------------------------------------------------------------------------
-+ Name: bcm_console_print
-+ Purpose: bcm_console_print is registered for printk.
-+ The console_lock must be held when we get here.
-+-------------------------------------------------------------------------- */
-+static void bcm_console_print (struct console * cons, const char * str,
-+ unsigned int count)
-+{
-+ unsigned int i;
-+ //_puts(str);
-+ for(i=0; i<count; i++, str++)
-+ {
-+ _putc(*str);
-+ if (*str == 10)
-+ {
-+ _putc(13);
-+ }
-+ }
-+}
-+
-+static struct tty_driver * bcm_console_device(struct console * c, int *index)
-+{
-+ *index = c->index;
-+ return &serial_driver;
-+}
-+
-+static int __init bcm_console_setup(struct console * co, char * options)
-+{
-+ return 0;
-+}
-+
-+static struct console bcm_sercons = {
-+ .name = "ttyS",
-+ .write = bcm_console_print,
-+ .device = bcm_console_device,
-+ .setup = bcm_console_setup,
-+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
-+ .index = -1,
-+};
-+
-+static int __init bcm63xx_console_init(void)
-+{
-+ register_console(&bcm_sercons);
-+ return 0;
-+}
-+
-+console_initcall(bcm63xx_console_init);
-diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile
---- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,13 @@
-+# File: bcmdrivers/opensource/char/serial
-+#
-+# Makefile for the BCM63xx serial/console driver
-+
-+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
-+
-+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
-+
-+-include $(TOPDIR)/Rules.make
-+
-+clean:
-+ rm -f core *.o *.a *.s
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,64 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __6338_INTR_H
-+#define __6338_INTR_H
-+
-+/*=====================================================================*/
-+/* BCM6338 External Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define INTERRUPT_ID_EXTERNAL_0 3
-+#define INTERRUPT_ID_EXTERNAL_1 4
-+#define INTERRUPT_ID_EXTERNAL_2 5
-+#define INTERRUPT_ID_EXTERNAL_3 6
-+
-+/*=====================================================================*/
-+/* BCM6338 Timer Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define MIPS_TIMER_INT 7
-+
-+/*=====================================================================*/
-+/* Peripheral ISR Table Offset */
-+/*=====================================================================*/
-+#define INTERNAL_ISR_TABLE_OFFSET 8
-+
-+/*=====================================================================*/
-+/* Logical Peripheral Interrupt IDs */
-+/*=====================================================================*/
-+
-+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
-+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
-+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
-+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
-+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
-+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
-+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
-+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
-+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
-+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
-+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
-+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
-+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
-+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
-+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
-+
-+#endif /* __BCM6338_H */
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,334 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __BCM6338_MAP_H
-+#define __BCM6338_MAP_H
-+
-+#include "bcmtypes.h"
-+
-+#define PERF_BASE 0xfffe0000
-+#define TIMR_BASE 0xfffe0200
-+#define UART_BASE 0xfffe0300
-+#define GPIO_BASE 0xfffe0400
-+#define SPI_BASE 0xfffe0c00
-+
-+typedef struct PerfControl {
-+ uint32 RevID;
-+ uint16 testControl;
-+ uint16 blkEnables;
-+#define EMAC_CLK_EN 0x0010
-+#define USBS_CLK_EN 0x0010
-+#define SAR_CLK_EN 0x0020
-+
-+#define SPI_CLK_EN 0x0200
-+
-+ uint32 pll_control;
-+#define SOFT_RESET 0x00000001
-+
-+ uint32 IrqMask;
-+ uint32 IrqStatus;
-+
-+ uint32 ExtIrqCfg;
-+#define EI_SENSE_SHFT 0
-+#define EI_STATUS_SHFT 5
-+#define EI_CLEAR_SHFT 10
-+#define EI_MASK_SHFT 15
-+#define EI_INSENS_SHFT 20
-+#define EI_LEVEL_SHFT 25
-+
-+ uint32 unused[4]; /* (18) */
-+ uint32 BlockSoftReset; /* (28) */
-+#define BSR_SPI 0x00000001
-+#define BSR_EMAC 0x00000004
-+#define BSR_USBH 0x00000008
-+#define BSR_USBS 0x00000010
-+#define BSR_ADSL 0x00000020
-+#define BSR_DMAMEM 0x00000040
-+#define BSR_SAR 0x00000080
-+#define BSR_ACLC 0x00000100
-+#define BSR_ADSL_MIPS_PLL 0x00000400
-+#define BSR_ALL_BLOCKS \
-+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
-+} PerfControl;
-+
-+#define PERF ((volatile PerfControl * const) PERF_BASE)
-+
-+
-+typedef struct Timer {
-+ uint16 unused0;
-+ byte TimerMask;
-+#define TIMER0EN 0x01
-+#define TIMER1EN 0x02
-+#define TIMER2EN 0x04
-+ byte TimerInts;
-+#define TIMER0 0x01
-+#define TIMER1 0x02
-+#define TIMER2 0x04
-+#define WATCHDOG 0x08
-+ uint32 TimerCtl0;
-+ uint32 TimerCtl1;
-+ uint32 TimerCtl2;
-+#define TIMERENABLE 0x80000000
-+#define RSTCNTCLR 0x40000000
-+ uint32 TimerCnt0;
-+ uint32 TimerCnt1;
-+ uint32 TimerCnt2;
-+ uint32 WatchDogDefCount;
-+
-+ /* Write 0xff00 0x00ff to Start timer
-+ * Write 0xee00 0x00ee to Stop and re-load default count
-+ * Read from this register returns current watch dog count
-+ */
-+ uint32 WatchDogCtl;
-+
-+ /* Number of 40-MHz ticks for WD Reset pulse to last */
-+ uint32 WDResetCount;
-+} Timer;
-+
-+#define TIMER ((volatile Timer * const) TIMR_BASE)
-+typedef struct UartChannel {
-+ byte unused0;
-+ byte control;
-+#define BRGEN 0x80 /* Control register bit defs */
-+#define TXEN 0x40
-+#define RXEN 0x20
-+#define LOOPBK 0x10
-+#define TXPARITYEN 0x08
-+#define TXPARITYEVEN 0x04
-+#define RXPARITYEN 0x02
-+#define RXPARITYEVEN 0x01
-+
-+ byte config;
-+#define XMITBREAK 0x40
-+#define BITS5SYM 0x00
-+#define BITS6SYM 0x10
-+#define BITS7SYM 0x20
-+#define BITS8SYM 0x30
-+#define ONESTOP 0x07
-+#define TWOSTOP 0x0f
-+ /* 4-LSBS represent STOP bits/char
-+ * in 1/8 bit-time intervals. Zero
-+ * represents 1/8 stop bit interval.
-+ * Fifteen represents 2 stop bits.
-+ */
-+ byte fifoctl;
-+#define RSTTXFIFOS 0x80
-+#define RSTRXFIFOS 0x40
-+ /* 5-bit TimeoutCnt is in low bits of this register.
-+ * This count represents the number of characters
-+ * idle times before setting receive Irq when below threshold
-+ */
-+ uint32 baudword;
-+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-+ */
-+
-+ byte txf_levl; /* Read-only fifo depth */
-+ byte rxf_levl; /* Read-only fifo depth */
-+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
-+ * RxThreshold. Irq can be asserted
-+ * when rx fifo> thresh, txfifo<thresh
-+ */
-+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
-+ * if these bits are also enabled to GPIO_o
-+ */
-+#define DTREN 0x01
-+#define RTSEN 0x02
-+
-+ byte unused1;
-+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
-+ * detect irq on rising AND falling
-+ * edges for corresponding GPIO_i
-+ * if enabled (edge insensitive)
-+ */
-+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
-+ * 0 for negedge sense if
-+ * not configured for edge
-+ * insensitive (see above)
-+ * Lower 4 bits: Mask to enable change
-+ * detection IRQ for corresponding
-+ * GPIO_i
-+ */
-+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
-+ * have changed (may set IRQ).
-+ * read automatically clears bit
-+ * Lower 4 bits are actual status
-+ */
-+
-+ uint16 intMask; /* Same Bit defs for Mask and status */
-+ uint16 intStatus;
-+#define DELTAIP 0x0001
-+#define TXUNDERR 0x0002
-+#define TXOVFERR 0x0004
-+#define TXFIFOTHOLD 0x0008
-+#define TXREADLATCH 0x0010
-+#define TXFIFOEMT 0x0020
-+#define RXUNDERR 0x0040
-+#define RXOVFERR 0x0080
-+#define RXTIMEOUT 0x0100
-+#define RXFIFOFULL 0x0200
-+#define RXFIFOTHOLD 0x0400
-+#define RXFIFONE 0x0800
-+#define RXFRAMERR 0x1000
-+#define RXPARERR 0x2000
-+#define RXBRK 0x4000
-+
-+ uint16 unused2;
-+ uint16 Data; /* Write to TX, Read from RX */
-+ /* bits 11:8 are BRK,PAR,FRM errors */
-+
-+ uint32 unused3;
-+ uint32 unused4;
-+} Uart;
-+
-+#define UART ((volatile Uart * const) UART_BASE)
-+
-+typedef struct GpioControl {
-+ uint32 unused0;
-+ uint32 GPIODir; /* bits 7:0 */
-+ uint32 unused1;
-+ uint32 GPIOio; /* bits 7:0 */
-+ uint32 LEDCtrl;
-+#define LED3_STROBE 0x08000000
-+#define LED2_STROBE 0x04000000
-+#define LED1_STROBE 0x02000000
-+#define LED0_STROBE 0x01000000
-+#define LED_TEST 0x00010000
-+#define LED3_DISABLE_LINK_ACT 0x00008000
-+#define LED2_DISABLE_LINK_ACT 0x00004000
-+#define LED1_DISABLE_LINK_ACT 0x00002000
-+#define LED0_DISABLE_LINK_ACT 0x00001000
-+#define LED_INTERVAL_SET_MASK 0x00000f00
-+#define LED_INTERVAL_SET_320MS 0x00000500
-+#define LED_INTERVAL_SET_160MS 0x00000400
-+#define LED_INTERVAL_SET_80MS 0x00000300
-+#define LED_INTERVAL_SET_40MS 0x00000200
-+#define LED_INTERVAL_SET_20MS 0x00000100
-+#define LED3_ON 0x00000080
-+#define LED2_ON 0x00000040
-+#define LED1_ON 0x00000020
-+#define LED0_ON 0x00000010
-+#define LED3_ENABLE 0x00000008
-+#define LED2_ENABLE 0x00000004
-+#define LED1_ENABLE 0x00000002
-+#define LED0_ENABLE 0x00000001
-+ uint32 SpiSlaveCfg;
-+#define SPI_SLAVE_RESET 0x00010000
-+#define SPI_RESTRICT 0x00000400
-+#define SPI_DELAY_DISABLE 0x00000200
-+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
-+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
-+#define SPI_MODE 0x00000001
-+ uint32 vRegConfig;
-+} GpioControl;
-+
-+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-+
-+/* Number to mask conversion macro used for GPIODir and GPIOio */
-+#define GPIO_NUM_MAX_BITS_MASK 0x0f
-+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-+
-+/*
-+** Spi Controller
-+*/
-+
-+typedef struct SpiControl {
-+ uint16 spiCmd; /* (0x0): SPI command */
-+#define SPI_CMD_START_IMMEDIATE 3
-+
-+#define SPI_CMD_COMMAND_SHIFT 0
-+#define SPI_CMD_DEVICE_ID_SHIFT 4
-+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
-+
-+ byte spiIntStatus; /* (0x2): SPI interrupt status */
-+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
-+
-+ byte spiIntMask; /* (0x4): SPI interrupt mask */
-+#define SPI_INTR_CMD_DONE 0x01
-+#define SPI_INTR_CLEAR_ALL 0x1f
-+
-+ byte spiStatus; /* (0x5): SPI status */
-+
-+ byte spiClkCfg; /* (0x6): SPI clock configuration */
-+
-+ byte spiFillByte; /* (0x7): SPI fill byte */
-+
-+ byte unused0;
-+ byte spiMsgTail; /* (0x9): msgtail */
-+ byte unused1;
-+ byte spiRxTail; /* (0xB): rxtail */
-+
-+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
-+
-+ byte spiMsgCtl; /* (0x40) control byte */
-+#define HALF_DUPLEX_W 1
-+#define HALF_DUPLEX_R 2
-+#define SPI_MSG_TYPE_SHIFT 6
-+#define SPI_BYTE_CNT_SHIFT 0
-+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
-+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
-+ byte unused3[64]; /* (0xc0 - 0xff) reserved */
-+} SpiControl;
-+
-+#define SPI ((volatile SpiControl * const) SPI_BASE)
-+
-+/*
-+** External Bus Interface
-+*/
-+typedef struct EbiChipSelect {
-+ uint32 base; /* base address in upper 24 bits */
-+#define EBI_SIZE_8K 0
-+#define EBI_SIZE_16K 1
-+#define EBI_SIZE_32K 2
-+#define EBI_SIZE_64K 3
-+#define EBI_SIZE_128K 4
-+#define EBI_SIZE_256K 5
-+#define EBI_SIZE_512K 6
-+#define EBI_SIZE_1M 7
-+#define EBI_SIZE_2M 8
-+#define EBI_SIZE_4M 9
-+#define EBI_SIZE_8M 10
-+#define EBI_SIZE_16M 11
-+#define EBI_SIZE_32M 12
-+#define EBI_SIZE_64M 13
-+#define EBI_SIZE_128M 14
-+#define EBI_SIZE_256M 15
-+ uint32 config;
-+#define EBI_ENABLE 0x00000001 /* .. enable this range */
-+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
-+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
-+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
-+#define EBI_WREN 0x00000020 /* enable posted writes */
-+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
-+ ** don't know what yet */
-+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
-+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
-+#define EBI_FIFO 0x00000200 /* .. use fifo */
-+#define EBI_RE 0x00000400 /* .. Reverse Endian */
-+} EbiChipSelect;
-+
-+typedef struct MpiRegisters {
-+ EbiChipSelect cs[1]; /* size chip select configuration */
-+} MpiRegisters;
-+
-+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-+
-+
-+#endif
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,72 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __6345_INTR_H
-+#define __6345_INTR_H
-+
-+
-+/*=====================================================================*/
-+/* BCM6345 External Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define INTERRUPT_ID_EXTERNAL_0 3
-+#define INTERRUPT_ID_EXTERNAL_1 4
-+#define INTERRUPT_ID_EXTERNAL_2 5
-+#define INTERRUPT_ID_EXTERNAL_3 6
-+
-+/*=====================================================================*/
-+/* BCM6345 Timer Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define MIPS_TIMER_INT 7
-+
-+/*=====================================================================*/
-+/* Peripheral ISR Table Offset */
-+/*=====================================================================*/
-+#define INTERNAL_ISR_TABLE_OFFSET 8
-+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
-+
-+/*=====================================================================*/
-+/* Logical Peripheral Interrupt IDs */
-+/*=====================================================================*/
-+
-+/* Internal peripheral interrupt IDs */
-+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
-+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
-+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
-+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
-+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
-+
-+/* DMA channel interrupt IDs */
-+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
-+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
-+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
-+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
-+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
-+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
-+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
-+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
-+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
-+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
-+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
-+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
-+
-+
-+#endif /* __BCM6345_H */
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,163 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __BCM6345_MAP_H
-+#define __BCM6345_MAP_H
-+
-+
-+#include "bcmtypes.h"
-+#include "6345_intr.h"
-+
-+typedef struct IntControl {
-+ uint32 RevID;
-+ uint16 testControl;
-+ uint16 blkEnables;
-+#define USB_CLK_EN 0x0100
-+#define EMAC_CLK_EN 0x0080
-+#define UART_CLK_EN 0x0008
-+#define CPU_CLK_EN 0x0001
-+
-+ uint32 pll_control;
-+#define SOFT_RESET 0x00000001
-+
-+ uint32 IrqMask;
-+ uint32 IrqStatus;
-+
-+ uint32 ExtIrqCfg;
-+#define EI_SENSE_SHFT 0
-+#define EI_STATUS_SHFT 4
-+#define EI_CLEAR_SHFT 8
-+#define EI_MASK_SHFT 12
-+#define EI_INSENS_SHFT 16
-+#define EI_LEVEL_SHFT 20
-+} IntControl;
-+
-+#define INTC_BASE 0xfffe0000
-+#define PERF ((volatile IntControl * const) INTC_BASE)
-+
-+#define TIMR_BASE 0xfffe0200
-+typedef struct Timer {
-+ uint16 unused0;
-+ byte TimerMask;
-+#define TIMER0EN 0x01
-+#define TIMER1EN 0x02
-+#define TIMER2EN 0x04
-+ byte TimerInts;
-+#define TIMER0 0x01
-+#define TIMER1 0x02
-+#define TIMER2 0x04
-+#define WATCHDOG 0x08
-+ uint32 TimerCtl0;
-+ uint32 TimerCtl1;
-+ uint32 TimerCtl2;
-+#define TIMERENABLE 0x80000000
-+#define RSTCNTCLR 0x40000000
-+ uint32 TimerCnt0;
-+ uint32 TimerCnt1;
-+ uint32 TimerCnt2;
-+ uint32 WatchDogDefCount;
-+
-+ /* Write 0xff00 0x00ff to Start timer
-+ * Write 0xee00 0x00ee to Stop and re-load default count
-+ * Read from this register returns current watch dog count
-+ */
-+ uint32 WatchDogCtl;
-+
-+ /* Number of 40-MHz ticks for WD Reset pulse to last */
-+ uint32 WDResetCount;
-+} Timer;
-+
-+#define TIMER ((volatile Timer * const) TIMR_BASE)
-+
-+typedef struct UartChannel {
-+ byte unused0;
-+ byte control;
-+#define BRGEN 0x80 /* Control register bit defs */
-+#define TXEN 0x40
-+#define RXEN 0x20
-+#define TXPARITYEN 0x08
-+#define TXPARITYEVEN 0x04
-+#define RXPARITYEN 0x02
-+#define RXPARITYEVEN 0x01
-+ byte config;
-+#define BITS5SYM 0x00
-+#define BITS6SYM 0x10
-+#define BITS7SYM 0x20
-+#define BITS8SYM 0x30
-+#define XMITBREAK 0x40
-+#define ONESTOP 0x07
-+#define TWOSTOP 0x0f
-+
-+ byte fifoctl;
-+#define RSTTXFIFOS 0x80
-+#define RSTRXFIFOS 0x40
-+ uint32 baudword;
-+
-+ byte txf_levl;
-+ byte rxf_levl;
-+ byte fifocfg;
-+ byte prog_out;
-+
-+ byte unused1;
-+ byte DeltaIPEdgeNoSense;
-+ byte DeltaIPConfig_Mask;
-+ byte DeltaIP_SyncIP;
-+ uint16 intMask;
-+ uint16 intStatus;
-+#define TXUNDERR 0x0002
-+#define TXOVFERR 0x0004
-+#define TXFIFOEMT 0x0020
-+#define RXOVFERR 0x0080
-+#define RXFIFONE 0x0800
-+#define RXFRAMERR 0x1000
-+#define RXPARERR 0x2000
-+#define RXBRK 0x4000
-+
-+ uint16 unused2;
-+ uint16 Data;
-+ uint32 unused3;
-+ uint32 unused4;
-+} Uart;
-+
-+#define UART_BASE 0xfffe0300
-+#define UART ((volatile Uart * const) UART_BASE)
-+
-+typedef struct GpioControl {
-+ uint16 unused0;
-+ byte unused1;
-+ byte TBusSel;
-+
-+ uint16 unused2;
-+ uint16 GPIODir;
-+ byte unused3;
-+ byte Leds;
-+ uint16 GPIOio;
-+
-+ uint32 UartCtl;
-+} GpioControl;
-+
-+#define GPIO_BASE 0xfffe0400
-+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-+
-+#define GPIO_NUM_MAX_BITS_MASK 0x0f
-+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-+
-+
-+#endif
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,74 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __6348_INTR_H
-+#define __6348_INTR_H
-+
-+
-+/*=====================================================================*/
-+/* BCM6348 External Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define INTERRUPT_ID_EXTERNAL_0 3
-+#define INTERRUPT_ID_EXTERNAL_1 4
-+#define INTERRUPT_ID_EXTERNAL_2 5
-+#define INTERRUPT_ID_EXTERNAL_3 6
-+
-+/*=====================================================================*/
-+/* BCM6348 Timer Interrupt Level Assignments */
-+/*=====================================================================*/
-+#define MIPS_TIMER_INT 7
-+
-+/*=====================================================================*/
-+/* Peripheral ISR Table Offset */
-+/*=====================================================================*/
-+#define INTERNAL_ISR_TABLE_OFFSET 8
-+
-+/*=====================================================================*/
-+/* Logical Peripheral Interrupt IDs */
-+/*=====================================================================*/
-+
-+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
-+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
-+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
-+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
-+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
-+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
-+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
-+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
-+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
-+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
-+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
-+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
-+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
-+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
-+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
-+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
-+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
-+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
-+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
-+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
-+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
-+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
-+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
-+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
-+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
-+
-+
-+#endif /* __BCM6348_H */
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,500 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __BCM6348_MAP_H
-+#define __BCM6348_MAP_H
-+
-+#include "bcmtypes.h"
-+
-+#define PERF_BASE 0xfffe0000
-+#define TIMR_BASE 0xfffe0200
-+#define UART_BASE 0xfffe0300
-+#define GPIO_BASE 0xfffe0400
-+#define MPI_BASE 0xfffe2000 /* MPI control registers */
-+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
-+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
-+
-+typedef struct PerfControl {
-+ uint32 RevID;
-+ uint16 testControl;
-+ uint16 blkEnables;
-+#define EMAC_CLK_EN 0x0010
-+#define SAR_CLK_EN 0x0020
-+#define USBS_CLK_EN 0x0040
-+#define USBH_CLK_EN 0x0100
-+
-+ uint32 pll_control;
-+#define SOFT_RESET 0x00000001
-+
-+ uint32 IrqMask;
-+ uint32 IrqStatus;
-+
-+ uint32 ExtIrqCfg;
-+#define EI_SENSE_SHFT 0
-+#define EI_STATUS_SHFT 5
-+#define EI_CLEAR_SHFT 10
-+#define EI_MASK_SHFT 15
-+#define EI_INSENS_SHFT 20
-+#define EI_LEVEL_SHFT 25
-+
-+ uint32 unused[4]; /* (18) */
-+ uint32 BlockSoftReset; /* (28) */
-+#define BSR_SPI 0x00000001
-+#define BSR_EMAC 0x00000004
-+#define BSR_USBH 0x00000008
-+#define BSR_USBS 0x00000010
-+#define BSR_ADSL 0x00000020
-+#define BSR_DMAMEM 0x00000040
-+#define BSR_SAR 0x00000080
-+#define BSR_ACLC 0x00000100
-+#define BSR_ADSL_MIPS_PLL 0x00000400
-+#define BSR_ALL_BLOCKS \
-+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
-+ uint32 unused2[2]; /* (2c) */
-+ uint32 PllStrap; /* (34) */
-+#define PLL_N1_SHFT 20
-+#define PLL_N1_MASK (7<<PLL_N1_SHFT)
-+#define PLL_N2_SHFT 15
-+#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
-+#define PLL_M1_REF_SHFT 12
-+#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
-+#define PLL_M2_REF_SHFT 9
-+#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
-+#define PLL_M1_CPU_SHFT 6
-+#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
-+#define PLL_M1_BUS_SHFT 3
-+#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
-+#define PLL_M2_BUS_SHFT 0
-+#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
-+} PerfControl;
-+
-+#define PERF ((volatile PerfControl * const) PERF_BASE)
-+
-+typedef struct Timer {
-+ uint16 unused0;
-+ byte TimerMask;
-+#define TIMER0EN 0x01
-+#define TIMER1EN 0x02
-+#define TIMER2EN 0x04
-+ byte TimerInts;
-+#define TIMER0 0x01
-+#define TIMER1 0x02
-+#define TIMER2 0x04
-+#define WATCHDOG 0x08
-+ uint32 TimerCtl0;
-+ uint32 TimerCtl1;
-+ uint32 TimerCtl2;
-+#define TIMERENABLE 0x80000000
-+#define RSTCNTCLR 0x40000000
-+ uint32 TimerCnt0;
-+ uint32 TimerCnt1;
-+ uint32 TimerCnt2;
-+ uint32 WatchDogDefCount;
-+
-+ /* Write 0xff00 0x00ff to Start timer
-+ * Write 0xee00 0x00ee to Stop and re-load default count
-+ * Read from this register returns current watch dog count
-+ */
-+ uint32 WatchDogCtl;
-+
-+ /* Number of 40-MHz ticks for WD Reset pulse to last */
-+ uint32 WDResetCount;
-+} Timer;
-+
-+#define TIMER ((volatile Timer * const) TIMR_BASE)
-+
-+typedef struct UartChannel {
-+ byte unused0;
-+ byte control;
-+#define BRGEN 0x80 /* Control register bit defs */
-+#define TXEN 0x40
-+#define RXEN 0x20
-+#define LOOPBK 0x10
-+#define TXPARITYEN 0x08
-+#define TXPARITYEVEN 0x04
-+#define RXPARITYEN 0x02
-+#define RXPARITYEVEN 0x01
-+
-+ byte config;
-+#define XMITBREAK 0x40
-+#define BITS5SYM 0x00
-+#define BITS6SYM 0x10
-+#define BITS7SYM 0x20
-+#define BITS8SYM 0x30
-+#define ONESTOP 0x07
-+#define TWOSTOP 0x0f
-+ /* 4-LSBS represent STOP bits/char
-+ * in 1/8 bit-time intervals. Zero
-+ * represents 1/8 stop bit interval.
-+ * Fifteen represents 2 stop bits.
-+ */
-+ byte fifoctl;
-+#define RSTTXFIFOS 0x80
-+#define RSTRXFIFOS 0x40
-+ /* 5-bit TimeoutCnt is in low bits of this register.
-+ * This count represents the number of characters
-+ * idle times before setting receive Irq when below threshold
-+ */
-+ uint32 baudword;
-+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-+ */
-+
-+ byte txf_levl; /* Read-only fifo depth */
-+ byte rxf_levl; /* Read-only fifo depth */
-+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
-+ * RxThreshold. Irq can be asserted
-+ * when rx fifo> thresh, txfifo<thresh
-+ */
-+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
-+ * if these bits are also enabled to GPIO_o
-+ */
-+#define DTREN 0x01
-+#define RTSEN 0x02
-+
-+ byte unused1;
-+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
-+ * detect irq on rising AND falling
-+ * edges for corresponding GPIO_i
-+ * if enabled (edge insensitive)
-+ */
-+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
-+ * 0 for negedge sense if
-+ * not configured for edge
-+ * insensitive (see above)
-+ * Lower 4 bits: Mask to enable change
-+ * detection IRQ for corresponding
-+ * GPIO_i
-+ */
-+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
-+ * have changed (may set IRQ).
-+ * read automatically clears bit
-+ * Lower 4 bits are actual status
-+ */
-+
-+ uint16 intMask; /* Same Bit defs for Mask and status */
-+ uint16 intStatus;
-+#define DELTAIP 0x0001
-+#define TXUNDERR 0x0002
-+#define TXOVFERR 0x0004
-+#define TXFIFOTHOLD 0x0008
-+#define TXREADLATCH 0x0010
-+#define TXFIFOEMT 0x0020
-+#define RXUNDERR 0x0040
-+#define RXOVFERR 0x0080
-+#define RXTIMEOUT 0x0100
-+#define RXFIFOFULL 0x0200
-+#define RXFIFOTHOLD 0x0400
-+#define RXFIFONE 0x0800
-+#define RXFRAMERR 0x1000
-+#define RXPARERR 0x2000
-+#define RXBRK 0x4000
-+
-+ uint16 unused2;
-+ uint16 Data; /* Write to TX, Read from RX */
-+ /* bits 11:8 are BRK,PAR,FRM errors */
-+
-+ uint32 unused3;
-+ uint32 unused4;
-+} Uart;
-+
-+#define UART ((volatile Uart * const) UART_BASE)
-+
-+typedef struct GpioControl {
-+ uint32 GPIODir_high; /* bits 36:32 */
-+ uint32 GPIODir; /* bits 31:00 */
-+ uint32 GPIOio_high; /* bits 36:32 */
-+ uint32 GPIOio; /* bits 31:00 */
-+ uint32 LEDCtrl;
-+#define LED3_STROBE 0x08000000
-+#define LED2_STROBE 0x04000000
-+#define LED1_STROBE 0x02000000
-+#define LED0_STROBE 0x01000000
-+#define LED_TEST 0x00010000
-+#define LED3_DISABLE_LINK_ACT 0x00008000
-+#define LED2_DISABLE_LINK_ACT 0x00004000
-+#define LED1_DISABLE_LINK_ACT 0x00002000
-+#define LED0_DISABLE_LINK_ACT 0x00001000
-+#define LED_INTERVAL_SET_MASK 0x00000f00
-+#define LED_INTERVAL_SET_320MS 0x00000500
-+#define LED_INTERVAL_SET_160MS 0x00000400
-+#define LED_INTERVAL_SET_80MS 0x00000300
-+#define LED_INTERVAL_SET_40MS 0x00000200
-+#define LED_INTERVAL_SET_20MS 0x00000100
-+#define LED3_ON 0x00000080
-+#define LED2_ON 0x00000040
-+#define LED1_ON 0x00000020
-+#define LED0_ON 0x00000010
-+#define LED3_ENABLE 0x00000008
-+#define LED2_ENABLE 0x00000004
-+#define LED1_ENABLE 0x00000002
-+#define LED0_ENABLE 0x00000001
-+ uint32 SpiSlaveCfg;
-+#define SPI_SLAVE_RESET 0x00010000
-+#define SPI_RESTRICT 0x00000400
-+#define SPI_DELAY_DISABLE 0x00000200
-+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
-+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
-+#define SPI_MODE 0x00000001
-+ uint32 GPIOMode;
-+#define GROUP4_DIAG 0x00090000
-+#define GROUP4_UTOPIA 0x00080000
-+#define GROUP4_LEGACY_LED 0x00030000
-+#define GROUP4_MII_SNOOP 0x00020000
-+#define GROUP4_EXT_EPHY 0x00010000
-+#define GROUP3_DIAG 0x00009000
-+#define GROUP3_UTOPIA 0x00008000
-+#define GROUP3_EXT_MII 0x00007000
-+#define GROUP2_DIAG 0x00000900
-+#define GROUP2_PCI 0x00000500
-+#define GROUP1_DIAG 0x00000090
-+#define GROUP1_UTOPIA 0x00000080
-+#define GROUP1_SPI_UART 0x00000060
-+#define GROUP1_SPI_MASTER 0x00000060
-+#define GROUP1_MII_PCCARD 0x00000040
-+#define GROUP1_MII_SNOOP 0x00000020
-+#define GROUP1_EXT_EPHY 0x00000010
-+#define GROUP0_DIAG 0x00000009
-+#define GROUP0_EXT_MII 0x00000007
-+
-+} GpioControl;
-+
-+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-+
-+/* Number to mask conversion macro used for GPIODir and GPIOio */
-+#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
-+#define GPIO_NUM_MAX_BITS_MASK 0x1f
-+#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
-+
-+/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
-+#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
-+#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
-+
-+
-+/*
-+** External Bus Interface
-+*/
-+typedef struct EbiChipSelect {
-+ uint32 base; /* base address in upper 24 bits */
-+#define EBI_SIZE_8K 0
-+#define EBI_SIZE_16K 1
-+#define EBI_SIZE_32K 2
-+#define EBI_SIZE_64K 3
-+#define EBI_SIZE_128K 4
-+#define EBI_SIZE_256K 5
-+#define EBI_SIZE_512K 6
-+#define EBI_SIZE_1M 7
-+#define EBI_SIZE_2M 8
-+#define EBI_SIZE_4M 9
-+#define EBI_SIZE_8M 10
-+#define EBI_SIZE_16M 11
-+#define EBI_SIZE_32M 12
-+#define EBI_SIZE_64M 13
-+#define EBI_SIZE_128M 14
-+#define EBI_SIZE_256M 15
-+ uint32 config;
-+#define EBI_ENABLE 0x00000001 /* .. enable this range */
-+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
-+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
-+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
-+#define EBI_WREN 0x00000020 /* enable posted writes */
-+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
-+ ** don't know what yet */
-+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
-+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
-+#define EBI_FIFO 0x00000200 /* .. use fifo */
-+#define EBI_RE 0x00000400 /* .. Reverse Endian */
-+} EbiChipSelect;
-+
-+typedef struct MpiRegisters {
-+ EbiChipSelect cs[7]; /* size chip select configuration */
-+#define EBI_CS0_BASE 0
-+#define EBI_CS1_BASE 1
-+#define EBI_CS2_BASE 2
-+#define EBI_CS3_BASE 3
-+#define PCMCIA_COMMON_BASE 4
-+#define PCMCIA_ATTRIBUTE_BASE 5
-+#define PCMCIA_IO_BASE 6
-+ uint32 unused0[2]; /* reserved */
-+ uint32 ebi_control; /* ebi control */
-+ uint32 unused1[4]; /* reserved */
-+#define EBI_ACCESS_TIMEOUT 0x000007FF
-+ uint32 pcmcia_cntl1; /* pcmcia control 1 */
-+#define PCCARD_CARD_RESET 0x00040000
-+#define CARDBUS_ENABLE 0x00008000
-+#define PCMCIA_ENABLE 0x00004000
-+#define PCMCIA_GPIO_ENABLE 0x00002000
-+#define CARDBUS_IDSEL 0x00001F00
-+#define VS2_OEN 0x00000080
-+#define VS1_OEN 0x00000040
-+#define VS2_OUT 0x00000020
-+#define VS1_OUT 0x00000010
-+#define VS2_IN 0x00000008
-+#define VS1_IN 0x00000004
-+#define CD2_IN 0x00000002
-+#define CD1_IN 0x00000001
-+#define VS_MASK 0x0000000C
-+#define CD_MASK 0x00000003
-+ uint32 unused2; /* reserved */
-+ uint32 pcmcia_cntl2; /* pcmcia control 2 */
-+#define PCMCIA_BYTESWAP_DIS 0x00000002
-+#define PCMCIA_HALFWORD_EN 0x00000001
-+#define RW_ACTIVE_CNT_BIT 2
-+#define INACTIVE_CNT_BIT 8
-+#define CE_SETUP_CNT_BIT 16
-+#define CE_HOLD_CNT_BIT 24
-+ uint32 unused3[40]; /* reserved */
-+
-+ uint32 sp0range; /* PCI to internal system bus address space */
-+ uint32 sp0remap;
-+ uint32 sp0cfg;
-+ uint32 sp1range;
-+ uint32 sp1remap;
-+ uint32 sp1cfg;
-+
-+ uint32 EndianCfg;
-+
-+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
-+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
-+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
-+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
-+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
-+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
-+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
-+
-+ uint32 l2pmrange1; /* internal system bus to PCI memory space */
-+#define PCI_SIZE_64K 0xFFFF0000
-+#define PCI_SIZE_128K 0xFFFE0000
-+#define PCI_SIZE_256K 0xFFFC0000
-+#define PCI_SIZE_512K 0xFFF80000
-+#define PCI_SIZE_1M 0xFFF00000
-+#define PCI_SIZE_2M 0xFFE00000
-+#define PCI_SIZE_4M 0xFFC00000
-+#define PCI_SIZE_8M 0xFF800000
-+#define PCI_SIZE_16M 0xFF000000
-+#define PCI_SIZE_32M 0xFE000000
-+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
-+ uint32 l2pmremap1;
-+#define CARDBUS_MEM 0x00000004
-+#define MEM_WINDOW_EN 0x00000001
-+ uint32 l2pmrange2;
-+ uint32 l2pmbase2;
-+ uint32 l2pmremap2;
-+ uint32 l2piorange; /* internal system bus to PCI I/O space */
-+ uint32 l2piobase;
-+ uint32 l2pioremap;
-+
-+ uint32 pcimodesel;
-+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
-+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
-+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
-+
-+ uint32 pciintstat; /* PCI interrupt mask/status */
-+#define MAILBOX1_SENT 0x08
-+#define MAILBOX0_SENT 0x04
-+#define MAILBOX1_MSG_RCV 0x02
-+#define MAILBOX0_MSG_RCV 0x01
-+ uint32 locbuscntrl; /* internal system bus control */
-+#define DIR_U2P_NOSWAP 0x00000002
-+#define EN_PCI_GPIO 0x00000001
-+ uint32 locintstat; /* internal system bus interrupt mask/status */
-+#define CSERR 0x0200
-+#define SERR 0x0100
-+#define EXT_PCI_INT 0x0080
-+#define DIR_FAILED 0x0040
-+#define DIR_COMPLETE 0x0020
-+#define PCI_CFG 0x0010
-+ uint32 unused5[7];
-+
-+ uint32 mailbox0;
-+ uint32 mailbox1;
-+
-+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
-+#define PCI_CFG_REG_WRITE_EN 0x00000080
-+#define PCI_CFG_ADDR 0x0000003C
-+ uint32 pcicfgdata; /* internal system bus PCI configuration data */
-+
-+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
-+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
-+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
-+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
-+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
-+ uint32 locch2intStat;
-+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
-+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
-+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
-+ uint32 locch2intMask;
-+ uint32 unused6;
-+ uint32 locch2descaddr;
-+ uint32 locch2status1;
-+#define LOCAL_DESC_STATE 0xE0000000
-+#define PCI_DESC_STATE 0x1C000000
-+#define BYTE_DONE 0x03FFC000
-+#define RING_ADDR 0x00003FFF
-+ uint32 locch2status2;
-+#define BUFPTR_OFFSET 0x1FFF0000
-+#define PCI_MASTER_STATE 0x000000C0
-+#define LOC_MASTER_STATE 0x00000038
-+#define CONTROL_STATE 0x00000007
-+ uint32 unused7;
-+
-+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
-+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
-+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
-+ uint32 locch1intstat;
-+ uint32 locch1intmask;
-+ uint32 unused8;
-+ uint32 locch1descaddr;
-+ uint32 locch1status1;
-+ uint32 locch1status2;
-+ uint32 unused9;
-+
-+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
-+ uint32 pcich1intstat;
-+ uint32 pcich1intmask;
-+ uint32 pcich1descaddr;
-+ uint32 pcich1status1;
-+ uint32 pcich1status2;
-+
-+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
-+ uint32 pcich2intstat;
-+ uint32 pcich2intmask;
-+ uint32 pcich2descaddr;
-+ uint32 pcich2status1;
-+ uint32 pcich2status2;
-+
-+ uint32 perm_id; /* permanent device and vendor id */
-+ uint32 perm_rev; /* permanent revision id */
-+} MpiRegisters;
-+
-+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-+
-+/* PCI configuration address space start offset 0x40 */
-+#define BRCM_PCI_CONFIG_TIMER 0x40
-+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
-+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
-+
-+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
-+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
-+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
-+
-+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
-+
-+#endif
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,59 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __BCM_INTR_H
-+#define __BCM_INTR_H
-+
-+#ifdef __cplusplus
-+ extern "C" {
-+#endif
-+
-+#if defined(CONFIG_BCM96338)
-+#include <6338_intr.h>
-+#endif
-+#if defined(CONFIG_BCM96345)
-+#include <6345_intr.h>
-+#endif
-+#if defined(CONFIG_BCM96348)
-+#include <6348_intr.h>
-+#endif
-+
-+/* defines */
-+struct pt_regs;
-+typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
-+
-+/* prototypes */
-+extern void enable_brcm_irq(unsigned int irq);
-+extern void disable_brcm_irq(unsigned int irq);
-+extern int request_external_irq(unsigned int irq,
-+ FN_HANDLER handler, unsigned long irqflags,
-+ const char * devname, void *dev_id);
-+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
-+ unsigned int interruptId);
-+extern void dump_intr_regs(void);
-+
-+/* compatibility definitions */
-+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
-+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
-+
-+#ifdef __cplusplus
-+ }
-+#endif
-+
-+#endif
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,34 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+#ifndef __BCM_MAP_PART_H
-+#define __BCM_MAP_PART_H
-+
-+#if defined(CONFIG_BCM96338)
-+#include <6338_map_part.h>
-+#endif
-+#if defined(CONFIG_BCM96345)
-+#include <6345_map_part.h>
-+#endif
-+#if defined(CONFIG_BCM96348)
-+#include <6348_map_part.h>
-+#endif
-+
-+#endif
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,87 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2004 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+//
-+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
-+//
-+#ifndef BCMPCI_H
-+#define BCMPCI_H
-+
-+/* Memory window in internal system bus address space */
-+#define BCM_PCI_MEM_BASE 0x08000000
-+/* IO window in internal system bus address space */
-+#define BCM_PCI_IO_BASE 0x0C000000
-+
-+#define BCM_PCI_ADDR_MASK 0x1fffffff
-+
-+/* Memory window size (range) */
-+#define BCM_PCI_MEM_SIZE_16MB 0x01000000
-+/* IO window size (range) */
-+#define BCM_PCI_IO_SIZE_64KB 0x00010000
-+
-+/* PCI Configuration and I/O space acesss */
-+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
-+
-+/* fake USB PCI slot */
-+#define USB_HOST_SLOT 9
-+#define USB_BAR0_MEM_SIZE 0x0800
-+
-+#define BCM_HOST_MEM_SPACE1 0x10000000
-+#define BCM_HOST_MEM_SPACE2 0x00000000
-+
-+/*
-+ * EBI bus clock is 33MHz and share with PCI bus
-+ * each clock cycle is 30ns.
-+ */
-+/* attribute memory access wait cnt for 4306 */
-+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
-+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
-+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
-+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
-+
-+/* common memory access wait cnt for 4306 */
-+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
-+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
-+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
-+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
-+
-+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
-+#define PCCARD_VCC_33V 0x00010000
-+#define PCCARD_VCC_50V 0x00020000
-+
-+typedef enum {
-+ MPI_CARDTYPE_NONE, // No Card in slot
-+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
-+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
-+} CardType;
-+
-+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
-+
-+#define pcmciaAttrOffset 0x00200000
-+#define pcmciaMemOffset 0x00000000
-+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
-+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
-+// Base Address is that mapped into the MPI ChipSelect registers.
-+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
-+#define pcmciaBase 0xbf000000
-+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
-+#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
-+#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
-+
-+#endif
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,153 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+//**************************************************************************************
-+// File Name : bcmTag.h
-+//
-+// Description: add tag with validation system to the firmware image file to be uploaded
-+// via http
-+//
-+// Created : 02/28/2002 seanl
-+//**************************************************************************************
-+
-+#ifndef _BCMTAG_H_
-+#define _BCMTAG_H_
-+
-+
-+#define BCM_SIG_1 "Broadcom Corporation"
-+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
-+
-+#define BCM_TAG_VER "6"
-+#define BCM_TAG_VER_LAST "26"
-+
-+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
-+#define TAG_LEN 256
-+#define TAG_VER_LEN 4
-+#define SIG_LEN 20
-+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
-+#define CHIP_ID_LEN 6
-+#define IMAGE_LEN 10
-+#define ADDRESS_LEN 12
-+#define FLAG_LEN 2
-+#define TOKEN_LEN 20
-+#define BOARD_ID_LEN 16
-+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
-+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
-+
-+
-+// TAG for downloadable image (kernel plus file system)
-+typedef struct _FILE_TAG
-+{
-+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
-+ unsigned char signiture_1[SIG_LEN]; // text line for company info
-+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
-+ unsigned char chipId[CHIP_ID_LEN]; // chip id
-+ unsigned char boardId[BOARD_ID_LEN]; // board id
-+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
-+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
-+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
-+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
-+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
-+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
-+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
-+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
-+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
-+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
-+ unsigned char reserved[RESERVED_LEN]; // reserved for later use
-+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
-+ // now will be 4 unsigned char crc
-+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
-+} FILE_TAG, *PFILE_TAG;
-+
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC_LEN 4
-+
-+// only included if for bcmTag.exe program
-+#ifdef BCMTAG_EXE_USE
-+
-+static unsigned long Crc32_table[256] = {
-+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
-+#endif // BCMTAG_USE
-+
-+
-+#endif // _BCMTAG_H_
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,163 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+
-+//
-+// bcmtypes.h - misc useful typedefs
-+//
-+#ifndef BCMTYPES_H
-+#define BCMTYPES_H
-+
-+// These are also defined in typedefs.h in the application area, so I need to
-+// protect against re-definition.
-+
-+#ifndef _TYPEDEFS_H_
-+typedef unsigned char uint8;
-+typedef unsigned short uint16;
-+typedef unsigned long uint32;
-+typedef signed char int8;
-+typedef signed short int16;
-+typedef signed long int32;
-+#if !defined(__cplusplus)
-+typedef int bool;
-+#endif
-+#endif
-+
-+typedef unsigned char byte;
-+// typedef unsigned long sem_t;
-+
-+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
-+typedef signed long LONG,*PLONG;
-+
-+typedef unsigned int *PUINT;
-+typedef signed int INT;
-+
-+typedef unsigned short *PUSHORT;
-+typedef signed short SHORT,*PSHORT;
-+typedef unsigned short WORD,*PWORD;
-+
-+typedef unsigned char *PUCHAR;
-+typedef signed char *PCHAR;
-+
-+typedef void *PVOID;
-+
-+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
-+
-+typedef unsigned char BYTE,*PBYTE;
-+
-+//#ifndef __GNUC__
-+//The following has been defined in Vxworks internally: vxTypesOld.h
-+//redefine under vxworks will cause error
-+typedef signed int *PINT;
-+
-+typedef signed char INT8;
-+typedef signed short INT16;
-+typedef signed long INT32;
-+
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned long UINT32;
-+
-+typedef unsigned char UCHAR;
-+typedef unsigned short USHORT;
-+typedef unsigned int UINT;
-+typedef unsigned long ULONG;
-+
-+typedef void VOID;
-+typedef unsigned char BOOL;
-+
-+//#endif /* __GNUC__ */
-+
-+
-+// These are also defined in typedefs.h in the application area, so I need to
-+// protect against re-definition.
-+#ifndef TYPEDEFS_H
-+
-+// Maximum and minimum values for a signed 16 bit integer.
-+#define MAX_INT16 32767
-+#define MIN_INT16 -32768
-+
-+// Useful for true/false return values. This uses the
-+// Taligent notation (k for constant).
-+typedef enum
-+{
-+ kFalse = 0,
-+ kTrue = 1
-+} Bool;
-+
-+#endif
-+
-+/* macros to protect against unaligned accesses */
-+
-+#if 0
-+/* first arg is an address, second is a value */
-+#define PUT16( a, d ) { \
-+ *((byte *)a) = (byte)((d)>>8); \
-+ *(((byte *)a)+1) = (byte)(d); \
-+}
-+
-+#define PUT32( a, d ) { \
-+ *((byte *)a) = (byte)((d)>>24); \
-+ *(((byte *)a)+1) = (byte)((d)>>16); \
-+ *(((byte *)a)+2) = (byte)((d)>>8); \
-+ *(((byte *)a)+3) = (byte)(d); \
-+}
-+
-+/* first arg is an address, returns a value */
-+#define GET16( a ) ( \
-+ (*((byte *)a) << 8) | \
-+ (*(((byte *)a)+1)) \
-+)
-+
-+#define GET32( a ) ( \
-+ (*((byte *)a) << 24) | \
-+ (*(((byte *)a)+1) << 16) | \
-+ (*(((byte *)a)+2) << 8) | \
-+ (*(((byte *)a)+3)) \
-+)
-+#endif
-+
-+#ifndef YES
-+#define YES 1
-+#endif
-+
-+#ifndef NO
-+#define NO 0
-+#endif
-+
-+#ifndef IN
-+#define IN
-+#endif
-+
-+#ifndef OUT
-+#define OUT
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+
-+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
-+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
-+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
-+
-+#endif
-diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h
---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h 2006-08-03 16:42:46.000000000 +0200
-@@ -0,0 +1,374 @@
-+/*
-+<:copyright-gpl
-+ Copyright 2002 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+:>
-+*/
-+/***********************************************************************/
-+/* */
-+/* MODULE: board.h */
-+/* DATE: 97/02/18 */
-+/* PURPOSE: Board specific information. This module should include */
-+/* all base device addresses and board specific macros. */
-+/* */
-+/***********************************************************************/
-+#ifndef _BOARD_H
-+#define _BOARD_H
-+
-+/*****************************************************************************/
-+/* Misc board definitions */
-+/*****************************************************************************/
-+
-+#define DYING_GASP_API
-+
-+/*****************************************************************************/
-+/* Physical Memory Map */
-+/*****************************************************************************/
-+
-+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
-+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
-+
-+/*****************************************************************************/
-+/* Note that the addresses above are physical addresses and that programs */
-+/* have to use converted addresses defined below: */
-+/*****************************************************************************/
-+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
-+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
-+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
-+
-+/*****************************************************************************/
-+/* Select the PLL value to get the desired CPU clock frequency. */
-+/* */
-+/* */
-+/*****************************************************************************/
-+#define FPERIPH 50000000
-+
-+#define ONEK 1024
-+#define BLK64K (64*ONEK)
-+#define FLASH45_BLKS_BOOT_ROM 1
-+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
-+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
-+
-+/*****************************************************************************/
-+/* Note that the addresses above are physical addresses and that programs */
-+/* have to use converted addresses defined below: */
-+/*****************************************************************************/
-+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
-+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
-+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
-+
-+/*****************************************************************************/
-+/* Select the PLL value to get the desired CPU clock frequency. */
-+/* */
-+/* */
-+/*****************************************************************************/
-+#define FPERIPH 50000000
-+
-+#define SDRAM_TYPE_ADDRESS_OFFSET 16
-+#define NVRAM_DATA_OFFSET 0x0580
-+#define NVRAM_DATA_ID 0x0f1e2d3c
-+#define BOARD_SDRAM_TYPE *(unsigned long *) \
-+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
-+
-+#define ONEK 1024
-+#define BLK64K (64*ONEK)
-+
-+// nvram and psi flash definitions for 45
-+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
-+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
-+
-+/*****************************************************************************/
-+/* NVRAM Offset and definition */
-+/*****************************************************************************/
-+
-+#define NVRAM_VERSION_NUMBER 2
-+#define NVRAM_VERSION_NUMBER_ADDRESS 0
-+
-+#define NVRAM_BOOTLINE_LEN 256
-+#define NVRAM_BOARD_ID_STRING_LEN 16
-+#define NVRAM_MAC_ADDRESS_LEN 6
-+#define NVRAM_MAC_COUNT_MAX 32
-+
-+/*****************************************************************************/
-+/* Misc Offsets */
-+/*****************************************************************************/
-+
-+#define CFE_VERSION_OFFSET 0x0570
-+#define CFE_VERSION_MARK_SIZE 5
-+#define CFE_VERSION_SIZE 5
-+
-+typedef struct
-+{
-+ unsigned long ulVersion;
-+ char szBootline[NVRAM_BOOTLINE_LEN];
-+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
-+ unsigned long ulReserved1[2];
-+ unsigned long ulNumMacAddrs;
-+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-+ char chReserved[2];
-+ unsigned long ulCheckSum;
-+} NVRAM_DATA, *PNVRAM_DATA;
-+
-+
-+/*****************************************************************************/
-+/* board ioctl calls for flash, led and some other utilities */
-+/*****************************************************************************/
-+
-+
-+/* Defines. for board driver */
-+#define BOARD_IOCTL_MAGIC 'B'
-+#define BOARD_DRV_MAJOR 206
-+
-+#define MAC_ADDRESS_ANY (unsigned long) -1
-+
-+#define BOARD_IOCTL_FLASH_INIT \
-+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_FLASH_WRITE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_FLASH_READ \
-+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_NR_PAGES \
-+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_DUMP_ADDR \
-+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_SET_MEMORY \
-+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_MIPS_SOFT_RESET \
-+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_LED_CTRL \
-+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_ID \
-+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_MAC_ADDRESS \
-+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
-+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_PSI_SIZE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_SDRAM_SIZE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_SET_MONITOR_FD \
-+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
-+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_BOOTLINE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_SET_BOOTLINE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
-+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_CHIP_ID \
-+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_NUM_ENET \
-+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_CFE_VER \
-+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_ENET_CFG \
-+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
-+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_SET_TRIGGER_EVENT \
-+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_GET_TRIGGER_EVENT \
-+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
-+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
-+
-+#define BOARD_IOCTL_SET_SES_LED \
-+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
-+
-+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-+#define RESET_BUTTON_UP 1
-+#define RESET_BUTTON_PRESSDOWN 0
-+#define BOARD_IOCTL_GET_RESETHOLD \
-+ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
-+//>>JUNHON, 2004/09/15
-+
-+// for the action in BOARD_IOCTL_PARMS for flash operation
-+typedef enum
-+{
-+ PERSISTENT,
-+ NVRAM,
-+ BCM_IMAGE_CFE,
-+ BCM_IMAGE_FS,
-+ BCM_IMAGE_KERNEL,
-+ BCM_IMAGE_WHOLE,
-+ SCRATCH_PAD,
-+ FLASH_SIZE,
-+} BOARD_IOCTL_ACTION;
-+
-+
-+typedef struct boardIoctParms
-+{
-+ char *string;
-+ char *buf;
-+ int strLen;
-+ int offset;
-+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
-+ int result;
-+} BOARD_IOCTL_PARMS;
-+
-+
-+// LED defines
-+typedef enum
-+{
-+ kLedAdsl,
-+ kLedWireless,
-+ kLedUsb,
-+ kLedHpna,
-+ kLedWanData,
-+ kLedPPP,
-+ kLedVoip,
-+ kLedSes,
-+ kLedLan,
-+ kLedSelfTest,
-+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
-+} BOARD_LED_NAME;
-+
-+typedef enum
-+{
-+ kLedStateOff, /* turn led off */
-+ kLedStateOn, /* turn led on */
-+ kLedStateFail, /* turn led on red */
-+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
-+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
-+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
-+} BOARD_LED_STATE;
-+
-+
-+// virtual and physical map pair defined in board.c
-+typedef struct ledmappair
-+{
-+ BOARD_LED_NAME ledName; // virtual led name
-+ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
-+ unsigned short ledMask; // physical GPIO pin mask
-+ unsigned short ledActiveLow; // reset bit to turn on LED
-+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
-+ unsigned short ledActiveLowFail;// reset bit to turn on LED
-+} LED_MAP_PAIR, *PLED_MAP_PAIR;
-+
-+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
-+
-+/* Flash storage address information that is determined by the flash driver. */
-+typedef struct flashaddrinfo
-+{
-+ int flash_persistent_start_blk;
-+ int flash_persistent_number_blk;
-+ int flash_persistent_length;
-+ unsigned long flash_persistent_blk_offset;
-+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
-+ int flash_scratch_pad_number_blk;
-+ int flash_scratch_pad_length;
-+ unsigned long flash_scratch_pad_blk_offset;
-+ int flash_nvram_start_blk;
-+ int flash_nvram_number_blk;
-+ int flash_nvram_length;
-+ unsigned long flash_nvram_blk_offset;
-+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
-+
-+// scratch pad defines
-+/* SP - Persisten Scratch Pad format:
-+ sp header : 32 bytes
-+ tokenId-1 : 8 bytes
-+ tokenId-1 len : 4 bytes
-+ tokenId-1 data
-+ ....
-+ tokenId-n : 8 bytes
-+ tokenId-n len : 4 bytes
-+ tokenId-n data
-+*/
-+
-+#define MAGIC_NUM_LEN 8
-+#define MAGIC_NUMBER "gOGoBrCm"
-+#define TOKEN_NAME_LEN 16
-+#define SP_VERSION 1
-+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
-+#define SP_RESERVERD 16
-+
-+typedef struct _SP_HEADER
-+{
-+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
-+ int SPVersion; // version number
-+ int SPUsedLen; // used sp len
-+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
-+} SP_HEADER, *PSP_HEADER;
-+
-+typedef struct _TOKEN_DEF
-+{
-+ char tokenName[TOKEN_NAME_LEN];
-+ int tokenLen;
-+} SP_TOKEN, *PSP_TOKEN;
-+
-+
-+/*****************************************************************************/
-+/* Function Prototypes */
-+/*****************************************************************************/
-+#if !defined(__ASM_ASM_H)
-+void dumpaddr( unsigned char *pAddr, int nLen );
-+
-+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info);
-+int kerSysNvRamGet(char *string, int strLen, int offset);
-+int kerSysNvRamSet(char *string, int strLen, int offset);
-+int kerSysPersistentGet(char *string, int strLen, int offset);
-+int kerSysPersistentSet(char *string, int strLen, int offset);
-+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
-+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
-+int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
-+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
-+int kerSysReleaseMacAddress( unsigned char *pucaAddr );
-+int kerSysGetSdramSize( void );
-+void kerSysGetBootline(char *string, int strLen);
-+void kerSysSetBootline(char *string, int strLen);
-+void kerSysMipsSoftReset(void);
-+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
-+int kerSysFlashSizeGet(void);
-+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
-+void kerSysDeregisterDyingGaspHandler(char *devname);
-+void kerSysWakeupMonitorTask( void );
-+#endif
-+
-+#define BOOT_CFE 0
-+#define BOOT_REDBOOT 1
-+
-+extern int boot_loader_type;
-+
-+#endif /* _BOARD_H */
-+
-diff -urN linux-2.6.17/bcmdrivers/opensource/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile
---- linux-2.6.17/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile 2006-08-03 16:42:38.000000000 +0200
-@@ -0,0 +1,20 @@
-+# File: modules/drivers/Makefile
-+#
-+# Makefile for the GPLed Linux kernel modules.
-+#
-+
-+LN_NAME=bcm9$(BRCM_CHIP)
-+LN_DRIVER_DIRS =
-+
-+-include $(KERNEL_DIR)/.config
-+
-+ifneq ($(CONFIG_BCM_SERIAL),)
-+ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME);
-+endif
-+
-+obj-$(CONFIG_BCM_SERIAL) += char/serial/impl$(CONFIG_BCM_SERIAL_IMPL)/
-+
-+
-+symlinks:
-+ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";"
-+ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)"
diff --git a/target/linux/brcm63xx-2.6/patches/030-boardparms.patch b/target/linux/brcm63xx-2.6/patches/030-boardparms.patch
deleted file mode 100644
index f6ce12ce34..0000000000
--- a/target/linux/brcm63xx-2.6/patches/030-boardparms.patch
+++ /dev/null
@@ -1,3186 +0,0 @@
-diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile
---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,16 @@
-+
-+ifeq ($(CONFIG_MIPS_BRCM),y)
-+
-+# Linux
-+obj-y += boardparms.o
-+EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP)
-+-include $(TOPDIR)/Rules.make
-+
-+else
-+
-+# CFE
-+BSPOBJS += boardparms.o
-+
-+endif
-+
-+
-diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c
---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,2392 @@
-+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.c
-+ *
-+ * Description: This file contains the implementation for the BCM63xx board
-+ * parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
-+
-+/* Includes. */
-+#include <linux/config.h>
-+#include "boardparms.h"
-+
-+/* Defines. */
-+
-+/* Default psi size in K bytes */
-+#define BP_PSI_DEFAULT_SIZE 24
-+
-+/* Typedefs */
-+typedef struct boardparameters
-+{
-+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
-+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
-+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
-+ unsigned short usSdramSize; /* SDRAM size and type */
-+ unsigned short usPsiSize; /* persistent storage in K bytes */
-+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
-+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
-+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
-+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
-+ unsigned short usGpioUartRts; /* GPIO pin or not defined */
-+ unsigned short usGpioUartCts; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
-+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
-+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
-+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
-+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
-+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
-+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
-+ unsigned short usExtIntrWireless; /* ext intr or not defined */
-+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
-+ unsigned short usExtIntrHpna; /* ext intr or not defined */
-+ unsigned short usCsHpna; /* chip select not defined */
-+ unsigned short usAntInUseWireless; /* antenna in use or not defined */
-+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
-+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
-+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
-+} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-+
-+/* Variables */
-+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-+static BOARD_PARAMETERS g_bcm96338sv =
-+{
-+ "96338SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static BOARD_PARAMETERS g_bcm96338l2m8m =
-+{
-+ "96338L-2M-8M", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-+#endif
-+
-+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-+static BOARD_PARAMETERS g_bcm96345r =
-+{
-+ "96345R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw2 =
-+{
-+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
-+ * Reset or RTS.
-+ */
-+ "96345GW2", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_GPIO_0_AH, /* usGpioPhySpiSck */
-+ BP_GPIO_4_AH, /* usGpioPhySpiSs */
-+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
-+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_GPIO, /* usConfigType */
-+ BP_ENET_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_GPIO_13_AH, /* usGpioUartRts */
-+ BP_GPIO_9_AH, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345gw =
-+{
-+ "96345GW", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_1, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_15_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_GPIO_10_AH, /* usGpioLedWireless */
-+ BP_GPIO_7_AH, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_EXT_INTR_2, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_EXT_INTR_3, /* usExtIntrHpna */
-+ BP_CS_1, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96335r =
-+{
-+ "96335R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_9_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_8_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_9_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345r0 =
-+{
-+ "96345R0", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_9_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96345rs =
-+{
-+ "96345RS", /* szBoardId */
-+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
-+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
-+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_GPIO_8_AH, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_8_AH, /* usGpioLedWanData */
-+ BP_GPIO_9_AH, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
-+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
-+ BP_GPIO_8_AH, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
-+ &g_bcm96345rs, 0};
-+#endif
-+
-+#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-+
-+static BOARD_PARAMETERS g_bcm96348r =
-+{
-+ "96348R", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY}}, /* ucPhyType */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348lv =
-+{
-+ "96348LV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x02, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_GPIO_5_AL, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw =
-+{
-+ "96348GW", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_10 =
-+{
-+ "96348GW-10", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_6_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348gw_11 =
-+{
-+ "96348GW-11", /* szBoardId */
-+ {{BP_ENET_NO_PHY}, /* ucPhyType */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x04, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static BOARD_PARAMETERS g_bcm96348sv =
-+{
-+ "96348SV", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
-+ 0x1f, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}}, /* usReverseMii */
-+ {{BP_VOIP_NO_DSP}, /* ucDspType */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_NOT_DEFINED, /* usGpioLedWanData */
-+ BP_NOT_DEFINED, /* usGpioLedPpp */
-+ BP_NOT_DEFINED, /* usGpioLedPppFail */
-+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
-+ BP_NOT_DEFINED, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-+{
-+ "96348GW-DualDSP", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x03, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_UNEQUIPPED, /* usGpioVoipReset */
-+ BP_GPIO_34_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_DSP, /* ucDspType */
-+ 0x01, /* ucDspAddress */
-+ BP_EXT_INTR_3, /* usExtIntrVoip */
-+ BP_UNEQUIPPED , /* usGpioVoipReset */
-+ BP_GPIO_35_AH, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_3}}, /* usCsVoip */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+
-+static BOARD_PARAMETERS g_bcmCustom_01 =
-+{
-+ "BCMCUST_01", /* szBoardId */
-+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
-+ 0x01, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_MDIO, /* usConfigType */
-+ BP_NOT_DEFINED}, /* usReverseMii */
-+ {BP_ENET_NO_PHY, /* ucPhyType */
-+ 0x00, /* ucPhyAddress */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
-+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
-+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
-+ BP_NOT_DEFINED, /* usGpioPhyReset */
-+ 0x01, /* numSwitchPorts */
-+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
-+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
-+ {{BP_VOIP_DSP, /* ucDspType */
-+ 0x00, /* ucDspAddress */
-+ BP_EXT_INTR_2, /* usExtIntrVoip */
-+ BP_GPIO_36_AH, /* usGpioVoipReset */
-+ BP_GPIO_34_AL, /* usGpioVoipIntr */
-+ BP_NOT_DEFINED, /* usGpioLedVoip */
-+ BP_CS_2}, /* usCsVoip */
-+ {BP_VOIP_NO_DSP}}, /* ucDspType */
-+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
-+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
-+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
-+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
-+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
-+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
-+ BP_NOT_DEFINED, /* usGpioUartRts */
-+ BP_NOT_DEFINED, /* usGpioUartCts */
-+ BP_NOT_DEFINED, /* usGpioLedAdsl */
-+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
-+ BP_NOT_DEFINED, /* usGpioLedWireless */
-+ BP_NOT_DEFINED, /* usGpioLedUsb */
-+ BP_NOT_DEFINED, /* usGpioLedHpna */
-+ BP_GPIO_3_AL, /* usGpioLedWanData */
-+ BP_GPIO_3_AL, /* usGpioLedPpp */
-+ BP_GPIO_4_AL, /* usGpioLedPppFail */
-+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
-+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
-+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
-+ BP_GPIO_1_AL, /* usGpioLedBlStop */
-+ BP_NOT_DEFINED, /* usExtIntrWireless */
-+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
-+ BP_NOT_DEFINED, /* usExtIntrHpna */
-+ BP_NOT_DEFINED, /* usCsHpna */
-+ BP_NOT_DEFINED, /* usAntInUseWireless */
-+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
-+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
-+ BP_NOT_DEFINED /* usGpioLedSesWireless */
-+};
-+
-+static PBOARD_PARAMETERS g_BoardParms[] =
-+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
-+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
-+ &g_bcmCustom_01, 0};
-+#endif
-+
-+static PBOARD_PARAMETERS g_pCurrentBp = 0;
-+
-+/**************************************************************************
-+ * Name : bpstrcmp
-+ *
-+ * Description: String compare for this file so it does not depend on an OS.
-+ * (Linux kernel and CFE share this source file.)
-+ *
-+ * Parameters : [IN] dest - destination string
-+ * [IN] src - source string
-+ *
-+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
-+ ***************************************************************************/
-+static int bpstrcmp(const char *dest,const char *src);
-+static int bpstrcmp(const char *dest,const char *src)
-+{
-+ while (*src && *dest)
-+ {
-+ if (*dest < *src) return -1;
-+ if (*dest > *src) return 1;
-+ dest++;
-+ src++;
-+ }
-+
-+ if (*dest && !*src) return 1;
-+ if (!*dest && *src) return -1;
-+ return 0;
-+} /* bpstrcmp */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipDspConfig
-+ *
-+ * Description: Gets the DSP configuration from the board parameter
-+ * structure for a given DSP index.
-+ *
-+ * Parameters : [IN] dspNum - DSP index (number)
-+ *
-+ * Returns : Pointer to DSP configuration block if found/valid, NULL
-+ * otherwise.
-+ ***************************************************************************/
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-+{
-+ VOIP_DSP_INFO *pDspConfig = 0;
-+ int i;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
-+ {
-+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
-+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
-+ {
-+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ return pDspConfig;
-+}
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId )
-+{
-+ int nRet = BP_BOARD_ID_NOT_FOUND;
-+ PBOARD_PARAMETERS *ppBp;
-+
-+ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
-+ {
-+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
-+ {
-+ g_pCurrentBp = *ppBp;
-+ nRet = BP_SUCCESS;
-+ break;
-+ }
-+ }
-+
-+ return( nRet );
-+} /* BpSetBoardId */
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-+{
-+ PBOARD_PARAMETERS *ppBp;
-+ int i;
-+ char *src;
-+ char *dest;
-+
-+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
-+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
-+ {
-+ dest = pszBoardIds;
-+ src = (*ppBp)->szBoardId;
-+ while( *src )
-+ *dest++ = *src++;
-+ *dest = '\0';
-+ }
-+
-+ return( i );
-+} /* BpGetBoardIds */
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-+{
-+ int i, nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ {
-+ if( i < BP_MAX_ENET_MACS )
-+ {
-+ unsigned char *src = (unsigned char *)
-+ &g_pCurrentBp->EnetMacInfos[i];
-+ unsigned char *dest = (unsigned char *) pEnetInfos;
-+ int len = sizeof(ETHERNET_MAC_INFO);
-+ while( len-- )
-+ *dest++ = *src++;
-+ }
-+ else
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+ }
-+
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-+
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetEthernetMacInfo */
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulSdramSize = g_pCurrentBp->usSdramSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulSdramSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetSdramSize */
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulPsiSize = g_pCurrentBp->usPsiSize;
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ *pulPsiSize = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPsiSize */
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
-+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-+
-+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusInner = *pusOuter = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetRj11InnerOuterPairGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-+
-+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPressAndHoldResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipReset;
-+
-+ if( *pusValue != BP_NOT_DEFINED ||
-+ *pusValue == BP_UNEQUIPPED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioVoipIntr;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipIntrGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-+
-+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPcmciaResetGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusRts = g_pCurrentBp->usGpioUartRts;
-+ *pusCts = g_pCurrentBp->usGpioUartCts;
-+
-+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
-+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusRts = *pusCts = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUartRtsCtsGpios */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdsl;
-+
-+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-+
-+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWireless;
-+
-+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usAntInUseWireless;
-+
-+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessAntInUse */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-+
-+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessSesBtnGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-+
-+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-+
-+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+
-+} /* BpGetWirelessSesLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedUsb;
-+
-+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetUsbLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedHpna;
-+
-+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedWanData;
-+
-+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWanDataLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPpp;
-+
-+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedPppFail;
-+
-+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetPppFailLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-+
-+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderPowerOn */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-+
-+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderAlarmLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-+
-+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderResetCfgLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pusValue = g_pCurrentBp->usGpioLedBlStop;
-+
-+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetBootloaderStopLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ *
-+ * Note : The VoIP structure would allow for having one LED per DSP
-+ * however, the board initialization function assumes only one
-+ * LED per functionality (ie one LED for VoIP). Therefore in
-+ * order to keep this tidy and simple we do not make usage of the
-+ * one-LED-per-DSP function. Instead, we assume that the LED for
-+ * VoIP is unique and associated with DSP 0 (always present on
-+ * any VoIP platform). If changing this to a LED-per-DSP function
-+ * then one need to update the board initialization driver in
-+ * bcmdrivers\opensource\char\board\bcm963xx\impl1
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-+
-+ if( pDspInfo )
-+ {
-+ *pusValue = pDspInfo->usGpioLedVoip;
-+
-+ if( *pusValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pusValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipLedGpio */
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrWireless;
-+
-+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetWirelessExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-+
-+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetAdslDyingGaspExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usExtIntrVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usExtIntrHpna;
-+
-+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaExtIntr */
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ *pulValue = g_pCurrentBp->usCsHpna;
-+
-+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetHpnaChipSelect */
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-+{
-+ int nRet;
-+
-+ if( g_pCurrentBp )
-+ {
-+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-+
-+ if( pDspInfo )
-+ {
-+ *pulValue = pDspInfo->usCsVoip;
-+
-+ if( *pulValue != BP_NOT_DEFINED )
-+ {
-+ nRet = BP_SUCCESS;
-+ }
-+ else
-+ {
-+ nRet = BP_VALUE_NOT_DEFINED;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_FOUND;
-+ }
-+ }
-+ else
-+ {
-+ *pulValue = BP_NOT_DEFINED;
-+ nRet = BP_BOARD_ID_NOT_SET;
-+ }
-+
-+ return( nRet );
-+} /* BpGetVoipChipSelect */
-+
-diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h
---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h 2006-07-05 15:21:58.000000000 +0200
-@@ -0,0 +1,766 @@
-+/*
-+<:copyright-gpl
-+
-+ Copyright 2003 Broadcom Corp. All Rights Reserved.
-+
-+ This program is free software; you can distribute it and/or modify it
-+ under the terms of the GNU General Public License (Version 2) as
-+ published by the Free Software Foundation.
-+
-+ This program is distributed in the hope it will be useful, but WITHOUT
-+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ for more details.
-+
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+
-+:>
-+*/
-+/**************************************************************************
-+ * File Name : boardparms.h
-+ *
-+ * Description: This file contains definitions and function prototypes for
-+ * the BCM63xx board parameter access functions.
-+ *
-+ * Updates : 07/14/2003 Created.
-+ ***************************************************************************/
-+
-+#if !defined(_BOARDPARMS_H)
-+#define _BOARDPARMS_H
-+
-+#if __cplusplus
-+extern "C" {
-+#endif
-+
-+/* Return codes. */
-+#define BP_SUCCESS 0
-+#define BP_BOARD_ID_NOT_FOUND 1
-+#define BP_VALUE_NOT_DEFINED 2
-+#define BP_BOARD_ID_NOT_SET 3
-+
-+/* Values for BpGetSdramSize. */
-+#define BP_MEMORY_8MB_1_CHIP 0
-+#define BP_MEMORY_16MB_1_CHIP 1
-+#define BP_MEMORY_32MB_1_CHIP 2
-+#define BP_MEMORY_64MB_2_CHIP 3
-+#define BP_MEMORY_32MB_2_CHIP 4
-+#define BP_MEMORY_16MB_2_CHIP 5
-+
-+/* Values for EthernetMacInfo PhyType. */
-+#define BP_ENET_NO_PHY 0
-+#define BP_ENET_INTERNAL_PHY 1
-+#define BP_ENET_EXTERNAL_PHY 2
-+#define BP_ENET_EXTERNAL_SWITCH 3
-+
-+/* Values for EthernetMacInfo Configuration type. */
-+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
-+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
-+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
-+
-+/* Values for EthernetMacInfo Reverse MII. */
-+#define BP_ENET_NO_REVERSE_MII 0
-+#define BP_ENET_REVERSE_MII 1
-+
-+/* Values for VoIPDSPInfo DSPType. */
-+#define BP_VOIP_NO_DSP 0
-+#define BP_VOIP_DSP 1
-+
-+
-+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-+#define BP_ACTIVE_MASK 0x8000
-+#define BP_ACTIVE_HIGH 0x0000
-+#define BP_ACTIVE_LOW 0x8000
-+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
-+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
-+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
-+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
-+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
-+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
-+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
-+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
-+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
-+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
-+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
-+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
-+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
-+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
-+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
-+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
-+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
-+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
-+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
-+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
-+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
-+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
-+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
-+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
-+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
-+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
-+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
-+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
-+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
-+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
-+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
-+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
-+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
-+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
-+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
-+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
-+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
-+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
-+
-+/* Values for external interrupt assignments. */
-+#define BP_EXT_INTR_0 0
-+#define BP_EXT_INTR_1 1
-+#define BP_EXT_INTR_2 2
-+#define BP_EXT_INTR_3 3
-+
-+/* Values for chip select assignments. */
-+#define BP_CS_0 0
-+#define BP_CS_1 1
-+#define BP_CS_2 2
-+#define BP_CS_3 3
-+
-+/* Value for GPIO and external interrupt fields that are not used. */
-+#define BP_NOT_DEFINED 0xffff
-+#define BP_HW_DEFINED 0xfff0
-+#define BP_UNEQUIPPED 0xfff1
-+
-+/* Maximum size of the board id string. */
-+#define BP_BOARD_ID_LEN 16
-+
-+/* Maximum number of Ethernet MACs. */
-+#define BP_MAX_ENET_MACS 2
-+
-+/* Maximum number of VoIP DSPs. */
-+#define BP_MAX_VOIP_DSP 2
-+
-+/* Wireless Antenna Settings. */
-+#define BP_WLAN_ANT_MAIN 0
-+#define BP_WLAN_ANT_AUX 1
-+#define BP_WLAN_ANT_BOTH 3
-+
-+#if !defined(__ASSEMBLER__)
-+
-+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
-+ * then the other fields are not valid.
-+ */
-+typedef struct EthernetMacInfo
-+{
-+ unsigned char ucPhyType; /* BP_ENET_xxx */
-+ unsigned char ucPhyAddress; /* 0 to 31 */
-+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
-+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
-+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
-+ unsigned short numSwitchPorts; /* Number of PHY ports */
-+ unsigned short usConfigType; /* Configuration type */
-+ unsigned short usReverseMii; /* Reverse MII */
-+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-+
-+
-+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
-+ * then the other fields are not valid.
-+ */
-+typedef struct VoIPDspInfo
-+{
-+ unsigned char ucDspType;
-+ unsigned char ucDspAddress;
-+ unsigned short usExtIntrVoip;
-+ unsigned short usGpioVoipReset;
-+ unsigned short usGpioVoipIntr;
-+ unsigned short usGpioLedVoip;
-+ unsigned short usCsVoip;
-+
-+} VOIP_DSP_INFO;
-+
-+
-+/**************************************************************************
-+ * Name : BpSetBoardId
-+ *
-+ * Description: This function find the BOARD_PARAMETERS structure for the
-+ * specified board id string and assigns it to a global, static
-+ * variable.
-+ *
-+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
-+ * have a board parameters configuration record.
-+ ***************************************************************************/
-+int BpSetBoardId( char *pszBoardId );
-+
-+/**************************************************************************
-+ * Name : BpGetBoardIds
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
-+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
-+ * boundary.
-+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
-+ * were allocated in pszBoardIds.
-+ *
-+ * Returns : Number of board id strings returned.
-+ ***************************************************************************/
-+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-+
-+/**************************************************************************
-+ * Name : BpGetEthernetMacInfo
-+ *
-+ * Description: This function returns all of the supported board id strings.
-+ *
-+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
-+ * buffers.
-+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
-+ * are pointed to by pEnetInfos.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-+
-+/**************************************************************************
-+ * Name : BpGetSdramSize
-+ *
-+ * Description: This function returns a constant that describees the board's
-+ * SDRAM type and size.
-+ *
-+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
-+ * is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetSdramSize( unsigned long *pulSdramSize );
-+
-+/**************************************************************************
-+ * Name : BpGetPsiSize
-+ *
-+ * Description: This function returns the persistent storage size in K bytes.
-+ *
-+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
-+ * storage size is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ ***************************************************************************/
-+int BpGetPsiSize( unsigned long *pulPsiSize );
-+
-+/**************************************************************************
-+ * Name : BpGetRj11InnerOuterPairGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for changing
-+ * between the RJ11 inner pair and RJ11 outer pair.
-+ *
-+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
-+ * GPIO pin is returned in.
-+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-+ unsigned short *pusOuter );
-+
-+/**************************************************************************
-+ * Name : BpGetPressAndHoldResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the press
-+ * and hold reset button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
-+ * reset button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipIntrGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
-+ * GPIO pin is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPcmciaResetGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PCMCIA
-+ * Reset operation.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPcmciaResetGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUartRtsCtsGpios
-+ *
-+ * Description: This function returns the GPIO pin assignments for RTS and CTS
-+ * UART signals.
-+ *
-+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
-+ * pin is returned in.
-+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
-+ * pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, values are returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the ADSL
-+ * LED that is used when there is a DSL connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessAntInUse
-+ *
-+ * Description: This function returns the antennas in use for wireless
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
-+ * is in use.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessAntInUse( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesBtnGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Button GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesExtIntr
-+ *
-+ * Description: This function returns the external interrupt number for the
-+ * Wireless Ses Button.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * external interrup is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessSesLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the Wireless
-+ * Ses Led.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
-+ * Led GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetUsbLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the USB
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetUsbLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the HPNA
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWanDataLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the WAN Data
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWanDataLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetPppFailLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the PPP
-+ * LED that is used when there is a PPP connection failure.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetPppFailLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the VOIP
-+ * LED.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderPowerOnLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the power
-+ * on LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderAlarmLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the alarm
-+ * LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
-+ * GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderResetCfgLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the reset
-+ * configuration LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the reset
-+ * configuration LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetBootloaderStopLedGpio
-+ *
-+ * Description: This function returns the GPIO pin assignment for the break
-+ * into bootloader LED that is set by the bootloader.
-+ *
-+ * Parameters : [OUT] pusValue - Address of short word that the break into
-+ * bootloader LED GPIO pin is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-+
-+/**************************************************************************
-+ * Name : BpGetWirelessExtIntr
-+ *
-+ * Description: This function returns the Wireless external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the wireless
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetWirelessExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetAdslDyingGaspExtIntr
-+ *
-+ * Description: This function returns the ADSL Dying Gasp external interrupt
-+ * number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipExtIntr
-+ *
-+ * Description: This function returns the VOIP external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * external interrupt number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaExtIntr
-+ *
-+ * Description: This function returns the HPNA external interrupt number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * external interrupt number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaExtIntr( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetHpnaChipSelect
-+ *
-+ * Description: This function returns the HPNA chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
-+ * chip select number is returned in.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetHpnaChipSelect( unsigned long *pulValue );
-+
-+/**************************************************************************
-+ * Name : BpGetVoipChipSelect
-+ *
-+ * Description: This function returns the VOIP chip select number.
-+ *
-+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
-+ * chip select number is returned in.
-+ * [IN] dspNum - Address of the DSP to query.
-+ *
-+ * Returns : BP_SUCCESS - Success, value is returned.
-+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
-+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
-+ * for the board.
-+ ***************************************************************************/
-+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-+
-+#endif /* __ASSEMBLER__ */
-+
-+#if __cplusplus
-+}
-+#endif
-+
-+#endif /* _BOARDPARMS_H */
-+
diff --git a/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch b/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch
deleted file mode 100644
index 737a70a48d..0000000000
--- a/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff -Naurp linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c linux-2.6.16.7-patched/net/ipv4/af_inet.c
---- linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c 2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7-patched/net/ipv4/af_inet.c 2006-07-05 15:33:47.000000000 +0200
-@@ -940,7 +940,9 @@ void inet_register_protosw(struct inet_p
- out:
- spin_unlock_bh(&inetsw_lock);
-
-+#ifndef CONFIG_MIPS_BRCM
- synchronize_net();
-+#endif
-
- return;
-
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 11:00:43 +0000