summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-03-03 23:12:34 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-03-03 23:12:34 +0000
commit7e450a1c869a5b227e3c91c4e71049059f1193e6 (patch)
treeaae119623b615b3e90d023218905982b73f151c0 /target
parent3fb328e79633a5a789af224d36d640bb01405bef (diff)
upgrade the ixp4xx ethernet driver to v0.3.1, split the Gateway 7001 support to two patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6489 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/ixp4xx-2.6/config/default5
-rw-r--r--target/linux/ixp4xx-2.6/patches/100-npe_driver.patch3598
-rw-r--r--target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch36
-rw-r--r--target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch71
-rw-r--r--target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch131
-rw-r--r--target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch3
-rw-r--r--target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch3
-rw-r--r--target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch99
-rw-r--r--target/linux/ixp4xx-2.6/patches/210-gateway_7001_mac_setup.patch62
9 files changed, 2866 insertions, 1142 deletions
diff --git a/target/linux/ixp4xx-2.6/config/default b/target/linux/ixp4xx-2.6/config/default
index 0acfdf4649..0869aa5147 100644
--- a/target/linux/ixp4xx-2.6/config/default
+++ b/target/linux/ixp4xx-2.6/config/default
@@ -18,7 +18,9 @@ CONFIG_ARCH_AVILA=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXDP425 is not set
+CONFIG_MACH_PRONGHORN=y
+CONFIG_MACH_PRONGHORNMETRO=y
+CONFIG_ARCH_IXDP425=y
CONFIG_ARCH_IXDP4XX=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -203,6 +205,7 @@ CONFIG_IXP4XX_NPE=y
CONFIG_IXP4XX_NPE_FW_LOAD=y
CONFIG_IXP4XX_NPE_FW_MTD=y
CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_CRYPTO=y
CONFIG_IXP4XX_WATCHDOG=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_FS_DEBUG=0
diff --git a/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch b/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch
index 0e13e1f7fb..8db6276587 100644
--- a/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch
+++ b/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch
@@ -1,7 +1,185 @@
-diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.6.17-owrt/Documentation/networking/ixp4xx/IxNpeMicrocode.h
---- linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2006-10-27 12:48:52.000000000 +0200
-@@ -0,0 +1,149 @@
+diff -Naur linux-2.6.19.orig/arch/arm/mach-ixp4xx/common.c linux-2.6.19/arch/arm/mach-ixp4xx/common.c
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/common.c 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/arch/arm/mach-ixp4xx/common.c 2007-01-12 21:54:40.000000000 -0700
+@@ -314,6 +314,90 @@
+ &ixp46x_i2c_controller
+ };
+
++static struct npe_plat_data npea = {
++ .name = "NPE-A",
++ .data_size = 0x800,
++ .inst_size = 0x1000,
++ .id = 0,
++};
++
++static struct npe_plat_data npeb = {
++ .name = "NPE-B",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 1,
++};
++
++static struct npe_plat_data npec = {
++ .name = "NPE-C",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 2,
++};
++
++static struct resource res_npea = {
++ .start = IXP4XX_NPEA_BASE_PHYS,
++ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npeb = {
++ .start = IXP4XX_NPEB_BASE_PHYS,
++ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npec = {
++ .start = IXP4XX_NPEC_BASE_PHYS,
++ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device dev_npea = {
++ .name = "ixp4xx_npe",
++ .id = 0,
++ .dev.platform_data = &npea,
++ .num_resources = 1,
++ .resource = &res_npea,
++};
++
++static struct platform_device dev_npeb = {
++ .name = "ixp4xx_npe",
++ .id = 1,
++ .dev.platform_data = &npeb,
++ .num_resources = 1,
++ .resource = &res_npeb,
++};
++
++static struct platform_device dev_npec = {
++ .name = "ixp4xx_npe",
++ .id = 2,
++ .dev.platform_data = &npec,
++ .num_resources = 1,
++ .resource = &res_npec,
++};
++
++/* QMGR */
++static struct resource res_qmgr[] = {
++{
++ .start = IXP4XX_QMGR_BASE_PHYS,
++ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
++ .flags = IORESOURCE_MEM,
++}, {
++ .start = IRQ_IXP4XX_QM1,
++ .flags = IORESOURCE_IRQ,
++} };
++
++static struct platform_device qmgr = {
++ .name = "ixp4xx_qmgr",
++ .id = 0,
++ .dev = {
++ .coherent_dma_mask = DMA_32BIT_MASK,
++ },
++ .num_resources = ARRAY_SIZE(res_qmgr),
++ .resource = res_qmgr,
++};
++
+ unsigned long ixp4xx_exp_bus_size;
+ EXPORT_SYMBOL(ixp4xx_exp_bus_size);
+
+@@ -333,8 +417,19 @@
+ break;
+ }
+ }
++ npeb.inst_size = 0x1000;
++ npec.inst_size = 0x1000;
+ }
+
++ platform_device_register(&qmgr);
++
++ if (ix_fuse() & IX_FUSE_NPEA)
++ platform_device_register(&dev_npea);
++ if (ix_fuse() & IX_FUSE_NPEB)
++ platform_device_register(&dev_npeb);
++ if (ix_fuse() & IX_FUSE_NPEC)
++ platform_device_register(&dev_npec);
++
+ printk("IXP4xx: Using %luMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
+ }
+diff -Naur linux-2.6.19.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.19/arch/arm/mach-ixp4xx/ixdp425-setup.c
+--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-01-12 21:54:40.000000000 -0700
+@@ -101,10 +101,59 @@
+ .resource = ixdp425_uart_resources
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ &ixdp425_i2c_controller,
+ &ixdp425_flash,
+- &ixdp425_uart
++ &ixdp425_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init ixdp425_init(void)
+diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.6.19/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+--- linux-2.6.19.orig/Documentation/networking/ixp4xx/IxNpeMicrocode.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,143 @@
+/*
+ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
+ *
@@ -16,11 +194,6 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.
+ *
+ * Executing the resulting binary on your build-host creates the
+ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode
-+ * The options -le and -be controll the output format of the microcode
-+ * the default is -be independent of the host endianess
-+ *
-+ * The download functions in the driver are smart enough to discover
-+ * and correct firmware with wrong endianess
+ *
+ * fetch the IxNpeMicrocode.c from the Intel Access Library.
+ * It will include this header.
@@ -46,12 +219,12 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.
+
+
+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++//#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
+// #define IX_NPEDL_NPEIMAGE_NPEB_DMA
+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-+#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
++ #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
+
+
+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
@@ -60,7 +233,7 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.
+// #define IX_NPEDL_NPEIMAGE_NPEC_DMA
+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN
+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL
-+#define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
++ #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL
+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
@@ -114,7 +287,6 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.
+ return EXIT_FAILURE;
+ }
+ }
-+ printf("Output format is %s endian\n", bigendian ? "big" : "little");
+
+ for (image = (struct dl_image *)arrayptr, cnt=0;
+ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d);
@@ -151,85 +323,9 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.
+ close(fd);
+ return 0;
+}
-diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/README linux-2.6.17-owrt/Documentation/networking/ixp4xx/README
---- linux-2.6.17/Documentation/networking/ixp4xx/README 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/README 2006-10-27 12:48:52.000000000 +0200
-@@ -0,0 +1,72 @@
-+Informations about the Networking Driver using the IXP4XX CPU internal NPEs
-+and Queue manager.
-+
-+If this driver is used, the IAL (Intel Access Library) must not be loaded.
-+However, the IAL may be loaded, if this Modules are unloaded:
-+ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
-+
-+This also means that HW crypto accelleration does NOT work when using this
-+driver, unless I have finished my crypto driver for NPE-C
-+
-+
-+Adoption to your custom board:
-+------------------------------
-+use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
-+
-+in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
-+(Ask your hardware designer about the PHY id)
-+If in doubt, try the values from the ixdp425 board.
-+
-+The order of "&mac0" and "&mac1" in the "struct platform_device"
-+determines which of them becomes eth0 and eth1.
-+
-+
-+The Microcode:
-+---------------
-+
-+The Download functions below are endianess independent.
-+If the image comes in wrong endianess, it is swapped automatically.
-+
-+Solution 1)
-+ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
-+ IXP4XX_NPE as module.
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
-+
-+ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
-+ to avoid unnessecary calls:
-+ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
-+
-+Solution 2)
-+ create a char-dev: "mknod /dev/ixp4xx_ucode c 10 184".
-+ If you are using "udev" or busybox "mdev", they will do this
-+ for you automatically during module load.
-+ cat the Microcode into it:
-+ cat /usr/lib/hotplug/firmware/NPE-* > /dev/ixp4xx_ucode
-+ This also works if the driver is linked to the kernel
-+
-+Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
-+is perfectly ok and works.
-+
-+The state of the NPEs can be seen and changed at:
-+/sys/bus/platform/devices/ixp4xx_npe.X/state
-+
-+
-+Obtaining the Microcode:
-+------------------------
-+1) IxNpeMicrocode.h in this directory:
-+ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
-+ It unpacks the Microcode IxNpeMicrocode.c
-+ Read the Licence !
-+ Read the top of IxNpeMicrocode.h for more details.
-+ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
-+ The resulting images can be moved to "/usr/lib/hotplug/firmware"
-+ The endianeess of the written microcode can be controlled by the
-+ switches -le -be. Default is big-endian.
-+
-+2) mc_grab.c in this directory:
-+ Compile and execute it either on the host or on the target
-+ to grab the microcode from a binary image like the RedBoot bootloader.
-+ (big-endian images only)
-+
-diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/mc_grab.c linux-2.6.17-owrt/Documentation/networking/ixp4xx/mc_grab.c
---- linux-2.6.17/Documentation/networking/ixp4xx/mc_grab.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/mc_grab.c 2006-10-27 12:48:52.000000000 +0200
+diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/mc_grab.c linux-2.6.19/Documentation/networking/ixp4xx/mc_grab.c
+--- linux-2.6.19.orig/Documentation/networking/ixp4xx/mc_grab.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/Documentation/networking/ixp4xx/mc_grab.c 2007-01-12 21:54:40.000000000 -0700
@@ -0,0 +1,97 @@
+/*
+ * mc_grab.c - grabs IXP4XX microcode from a binary datastream
@@ -328,261 +424,931 @@ diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/mc_grab.c linux-2.6.17-ow
+ fprintf(stderr, "Error reading Microcode\n");
+ return ret;
+}
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/common.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/common.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/common.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/common.c 2006-10-27 12:50:32.000000000 +0200
-@@ -341,6 +341,97 @@
- &ixp46x_i2c_controller
- };
-
-+static struct npe_plat_data npea = {
-+ .name = "NPE-A",
-+ .data_size = 0x800,
-+ .inst_size = 0x1000,
-+ .id = 0,
-+};
+diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/README linux-2.6.19/Documentation/networking/ixp4xx/README
+--- linux-2.6.19.orig/Documentation/networking/ixp4xx/README 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/Documentation/networking/ixp4xx/README 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,62 @@
++Informations about the Networking Driver using the IXP4XX CPU internal NPEs
++and Queue manager.
+
-+static struct npe_plat_data npeb = {
-+ .name = "NPE-B",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 1,
-+};
++If this driver is used, the IAL (Intel Access Library) must not be loaded.
++However, the IAL may be loaded, if this Modules are unloaded:
++ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
+
-+static struct npe_plat_data npec = {
-+ .name = "NPE-C",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 2,
-+};
++This also means that HW crypto accelleration does NOT work when using this
++driver, unless I have finished my crypto driver for NPE-C
+
-+static struct resource res_npea = {
-+ .start = IXP4XX_NPEA_BASE_PHYS,
-+ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
+
-+static struct resource res_npeb = {
-+ .start = IXP4XX_NPEB_BASE_PHYS,
-+ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
++Adoption to your custom board:
++------------------------------
++use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
+
-+static struct resource res_npec = {
-+ .start = IXP4XX_NPEC_BASE_PHYS,
-+ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
++in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
++(Ask your hardware designer about the PHY id)
+
-+static struct platform_device dev_npea = {
-+ .name = "ixp4xx_npe",
-+ .id = 0,
-+ .dev.platform_data = &npea,
-+ .num_resources = 1,
-+ .resource = &res_npea,
-+};
++The order of "&mac0" and "&mac1" in the "struct platform_device"
++determines which of them becomes eth0 and eth1
+
-+static struct platform_device dev_npeb = {
-+ .name = "ixp4xx_npe",
-+ .id = 1,
-+ .dev.platform_data = &npeb,
-+ .num_resources = 1,
-+ .resource = &res_npeb,
-+};
+
-+static struct platform_device dev_npec = {
-+ .name = "ixp4xx_npe",
-+ .id = 2,
-+ .dev.platform_data = &npec,
-+ .num_resources = 1,
-+ .resource = &res_npec,
-+};
++The Microcode:
++---------------
++Solution 1)
++ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
++ IXP4XX_NPE as module.
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
+
-+/* QMGR */
-+static struct resource res_qmgr[] = {
++ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
++ to avoid unnessecary calls:
++ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
++
++Solution 2)
++ create a char-dev: "mknod /dev/misc/npe c 10 184"
++ cat the Microcode into it:
++ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe
++ This also works if the driver is linked to the kernel
++
++ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
++ is perfectly ok and works.
++
++ The state of the NPEs can be seen and changed at:
++ /sys/bus/platform/devices/ixp4xx_npe.X/state
++
++
++Obtaining the Microcode:
++------------------------
++1) IxNpeMicrocode.h in this directory:
++ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
++ It unpacks the Microcode IxNpeMicrocode.c
++ Read the Licence !
++ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
++ The resulting images can be moved to "/usr/lib/hotplug/firmware"
++
++2) mc_grab.c in this directory:
++ Compile and execute it either on the host or on the target
++ to grab the microcode from a binary image like the RedBoot bootloader.
++
++
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_crypto.c linux-2.6.19/drivers/net/ixp4xx/ixp4xx_crypto.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_crypto.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,851 @@
++/*
++ * ixp4xx_crypto.c - interface to the HW crypto
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/kernel.h>
++#include <linux/ixp_crypto.h>
++
++#define SEND_QID 29
++#define RECV_QID 30
++
++#define NPE_ID 2 /* NPE C */
++
++#define QUEUE_SIZE 64
++#define MY_VERSION "0.0.1"
++
++/* local head for all sa_ctx */
++static struct ix_sa_master sa_master;
++
++static const struct ix_hash_algo _hash_algos[] = {
+{
-+ .start = IXP4XX_QMGR_BASE_PHYS,
-+ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+}, {
-+ .start = IRQ_IXP4XX_QM1,
-+ .flags = IORESOURCE_IRQ,
++ .name = "MD5",
++ .cfgword = 0xAA010004,
++ .digest_len = 16,
++ .icv = "\x01\x23\x45\x67\x89\xAB\xCD\xEF"
++ "\xFE\xDC\xBA\x98\x76\x54\x32\x10",
++ .type = HASH_TYPE_MD5,
++},{
++ .name = "SHA1",
++ .cfgword = 0x00000005,
++ .digest_len = 20,
++ .icv = "\x67\x45\x23\x01\xEF\xCD\xAB\x89\x98\xBA"
++ "\xDC\xFE\x10\x32\x54\x76\xC3\xD2\xE1\xF0",
++ .type = HASH_TYPE_SHA1,
++#if 0
++},{
++ .name = "CBC MAC",
++ .digest_len = 64,
++ .aad_len = 48,
++ .type = HASH_TYPE_CBCMAC,
++#endif
+} };
+
-+static struct platform_device qmgr = {
-+ .name = "ixp4xx_qmgr",
-+ .id = 0,
-+ .dev = {
-+ .coherent_dma_mask = DMA_31BIT_MASK,
-+ },
-+ .num_resources = ARRAY_SIZE(res_qmgr),
-+ .resource = res_qmgr,
-+};
++static const struct ix_cipher_algo _cipher_algos[] = {
++{
++ .name = "DES ECB",
++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_ECB | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_ECB | KEYLEN_192,
++ .block_len = 8,
++ .type = CIPHER_TYPE_DES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "DES CBC",
++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_CBC_ENC | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_CBC_DEC | KEYLEN_192,
++ .iv_len = 8,
++ .block_len = 8,
++ .type = CIPHER_TYPE_DES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "3DES ECB",
++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
++ .block_len = 8,
++ .type = CIPHER_TYPE_3DES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "3DES CBC",
++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_CBC_ENC | KEYLEN_192,
++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_CBC_DEC | KEYLEN_192,
++ .iv_len = 8,
++ .block_len = 8,
++ .type = CIPHER_TYPE_3DES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "AES ECB",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_ECB,
++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_ECB,
++ .block_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_ECB,
++},{
++ .name = "AES CBC",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CBC_ENC,
++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_CBC_DEC,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CBC,
++},{
++ .name = "AES CTR",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CTR,
++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CTR,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CTR,
++#if 0
++},{
++ .name = "AES CCM",
++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CCM_ENC,
++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CCM_DEC,
++ .block_len = 16,
++ .iv_len = 16,
++ .type = CIPHER_TYPE_AES,
++ .mode = CIPHER_MODE_CCM,
++#endif
++} };
+
-+static struct platform_device *npes_qmgr[] __initdata = {
-+ &qmgr,
-+ &dev_npea,
-+ &dev_npeb,
-+ &dev_npec,
-+};
++const struct ix_hash_algo *ix_hash_by_id(int type)
++{
++ int i;
+
- unsigned long ixp4xx_exp_bus_size;
- EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-@@ -360,7 +451,10 @@
- break;
- }
- }
-+ npeb.inst_size = 0x1000;
-+ npec.inst_size = 0x1000;
- }
-+ platform_add_devices(npes_qmgr, ARRAY_SIZE(npes_qmgr));
-
- printk("IXP4xx: Using %luMiB expansion bus window size\n",
- ixp4xx_exp_bus_size >> 20);
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-10-27 12:48:54.000000000 +0200
-@@ -101,10 +101,57 @@
- .resource = ixdp425_uart_resources
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
++ for(i=0; i<ARRAY_SIZE(_hash_algos); i++) {
++ if (_hash_algos[i].type == type)
++ return _hash_algos + i;
++ }
++ return NULL;
++}
+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode)
++{
++ int i;
+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+};
++ for(i=0; i<ARRAY_SIZE(_cipher_algos); i++) {
++ if (_cipher_algos[i].type==type && _cipher_algos[i].mode==mode)
++ return _cipher_algos + i;
++ }
++ return NULL;
++}
+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+};
++static void irqcb_recv(struct qm_queue *queue);
+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
++static int init_sa_master(struct ix_sa_master *master)
++{
++ struct npe_info *npe;
++ int ret = -ENODEV;
+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
++ if (! (ix_fuse() & (IX_FUSE_HASH | IX_FUSE_AES | IX_FUSE_DES))) {
++ printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
++ return ret;
++ }
++ memset(master, 0, sizeof(struct ix_sa_master));
++ master->npe_dev = get_npe_by_id(NPE_ID);
++ if (! master->npe_dev)
++ goto err;
+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
- &ixdp425_flash,
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init ixdp425_init(void)
-diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig
---- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/Kconfig 2006-10-27 12:48:54.000000000 +0200
-@@ -187,6 +187,8 @@
-
- source "drivers/net/arm/Kconfig"
-
-+source "drivers/net/ixp4xx/Kconfig"
++ npe = dev_get_drvdata(master->npe_dev);
+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -Nur linux-2.6.17/drivers/net/Makefile linux-2.6.17-owrt/drivers/net/Makefile
---- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/drivers/net/Makefile 2006-10-27 12:48:54.000000000 +0200
-@@ -208,6 +208,7 @@
- obj-$(CONFIG_IRDA) += irda/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
-
- obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/Kconfig linux-2.6.17-owrt/drivers/net/ixp4xx/Kconfig
---- linux-2.6.17/drivers/net/ixp4xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/Kconfig 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,40 @@
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX Queue manager is a configurable hardware ringbuffer.
-+ It is used by the NPEs to exchange data from and to the CPU.
-+ You can either use this OR the Intel Access Library (IAL)
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ switch (npe->img_info[1]) {
++ case 4:
++ printk(KERN_INFO "Crypto AES avaialable\n");
++ break;
++ case 5:
++ printk(KERN_INFO "Crypto AES and CCM avaialable\n");
++ break;
++ default:
++ printk(KERN_WARNING "Current microcode for %s has no"
++ " crypto capabilities\n", npe->plat->name);
++ break;
++ }
++ }
++ rwlock_init(&master->lock);
++ master->dmapool = dma_pool_create("ixp4xx_crypto", master->npe_dev,
++ sizeof(struct npe_crypt_cont), 32, 0);
++ if (!master->dmapool) {
++ ret = -ENOMEM;
++ goto err;
++ }
++ master->sendq = request_queue(SEND_QID, QUEUE_SIZE);
++ if (IS_ERR(master->sendq)) {
++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
++ SEND_QID);
++ ret = PTR_ERR(master->sendq);
++ goto err;
++ }
++ master->recvq = request_queue(RECV_QID, QUEUE_SIZE);
++ if (IS_ERR(master->recvq)) {
++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
++ RECV_QID);
++ ret = PTR_ERR(master->recvq);
++ release_queue(master->sendq);
++ goto err;
++ }
+
-+config IXP4XX_NPE
-+ tristate "IXP4xx NPE support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX NPE driver supports the 3 CPU co-processors called
-+ "Network Processing Engines" (NPE). It adds support fo downloading
-+ the Microcode (firmware) via Hotplug or character-special-device.
-+ More about this at: Documentation/networking/ixp4xx/README.
-+ You can either use this OR the Intel Access Library (IAL)
++ master->recvq->irq_cb = irqcb_recv;
++ queue_set_watermarks(master->recvq, 0, 0);
++ queue_set_irq_src(master->recvq, Q_IRQ_ID_NOT_E);
++ queue_enable_irq(master->recvq);
++ printk(KERN_INFO "ixp4xx_crypto " MY_VERSION " registered successfully\n");
+
-+config IXP4XX_FW_LOAD
-+ bool "Use Firmware hotplug for Microcode download"
-+ depends on IXP4XX_NPE
-+ select HOTPLUG
-+ select FW_LOADER
-+ help
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
++ return 0;
++err:
++ if (master->dmapool)
++ dma_pool_destroy(master->dmapool);
++ if (! master->npe_dev)
++ put_device(master->npe_dev);
++ return ret;
+
-+config IXP4XX_MAC
-+ tristate "IXP4xx MAC support"
-+ depends on IXP4XX_NPE
-+ depends on IXP4XX_QMGR
-+ depends on NET_ETHERNET
-+ select MII
-+ help
-+ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
-+ There are 2 on ixp425 and up to 5 on ixdp465.
-+ You can either use this OR the Intel Access Library (IAL)
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/Makefile linux-2.6.17-owrt/drivers/net/ixp4xx/Makefile
---- linux-2.6.17/drivers/net/ixp4xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/Makefile 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,6 @@
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-+obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
++}
++
++static void release_sa_master(struct ix_sa_master *master)
++{
++ struct npe_crypt_cont *cont;
++ unsigned long flags;
++
++ write_lock_irqsave(&master->lock, flags);
++ while (master->pool) {
++ cont = master->pool;
++ master->pool = cont->next;
++ dma_pool_free(master->dmapool, cont, cont->phys);
++ master->pool_size--;
++ }
++ write_unlock_irqrestore(&master->lock, flags);
++ if (master->pool_size) {
++ printk(KERN_ERR "ixp4xx_crypto: %d items lost from DMA pool\n",
++ master->pool_size);
++ }
++
++ dma_pool_destroy(master->dmapool);
++ release_queue(master->sendq);
++ release_queue(master->recvq);
++ return_npe_dev(master->npe_dev);
++}
++
++static struct npe_crypt_cont *ix_sa_get_cont(struct ix_sa_master *master)
++{
++ unsigned long flags;
++ struct npe_crypt_cont *cont;
++ dma_addr_t handle;
++
++ write_lock_irqsave(&master->lock, flags);
++ if (!master->pool) {
++ cont = dma_pool_alloc(master->dmapool, GFP_ATOMIC, &handle);
++ if (cont) {
++ master->pool_size++;
++ cont->phys = handle;
++ cont->virt = cont;
++ }
++ } else {
++ cont = master->pool;
++ master->pool = cont->next;
++ }
++ write_unlock_irqrestore(&master->lock, flags);
++ return cont;
++}
++
++static void
++ix_sa_return_cont(struct ix_sa_master *master,struct npe_crypt_cont *cont)
++{
++ unsigned long flags;
++
++ write_lock_irqsave(&master->lock, flags);
++ cont->next = master->pool;
++ master->pool = cont;
++ write_unlock_irqrestore(&master->lock, flags);
++}
++
++static void free_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
++{
++ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
++ dma_pool_free(sa_ctx->master->dmapool, dir->npe_ctx,
++ dir->npe_ctx_phys);
++}
++
++static void ix_sa_ctx_destroy(struct ix_sa_ctx *sa_ctx)
++{
++ BUG_ON(sa_ctx->state != STATE_UNLOADING);
++ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
++ free_sa_dir(sa_ctx, &sa_ctx->decrypt);
++ kfree(sa_ctx);
++ module_put(THIS_MODULE);
++}
++
++static void recv_pack(struct qm_queue *queue, u32 phys)
++{
++ struct ix_sa_ctx *sa_ctx;
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++ int failed;
++
++ failed = phys & 0x1;
++ phys &= ~0x3;
++
++ cr_cont = dma_to_virt(queue->dev, phys);
++ cr_cont = cr_cont->virt;
++ sa_ctx = cr_cont->ctl.crypt.sa_ctx;
++
++ phys = npe_to_cpu32(cr_cont->ctl.crypt.src_buf);
++ if (phys) {
++ cont = dma_to_virt(queue->dev, phys);
++ cont = cont->virt;
++ } else {
++ cont = NULL;
++ }
++ if (cr_cont->ctl.crypt.oper_type == OP_PERFORM) {
++ dma_unmap_single(sa_ctx->master->npe_dev,
++ cont->eth.phys_addr,
++ cont->eth.buf_len,
++ DMA_BIDIRECTIONAL);
++ if (sa_ctx->perf_cb)
++ sa_ctx->perf_cb(sa_ctx, cont->data, failed);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++ return;
++ }
++
++ /* We are registering */
++ switch (cr_cont->ctl.crypt.mode) {
++ case NPE_OP_HASH_GEN_ICV:
++ /* 1 out of 2 HMAC preparation operations completed */
++ dma_unmap_single(sa_ctx->master->npe_dev,
++ cont->eth.phys_addr,
++ cont->eth.buf_len,
++ DMA_TO_DEVICE);
++ kfree(cont->data);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ break;
++ case NPE_OP_ENC_GEN_KEY:
++ memcpy(sa_ctx->decrypt.npe_ctx + sizeof(u32),
++ sa_ctx->rev_aes->ctl.rev_aes_key + sizeof(u32),
++ sa_ctx->c_key.len);
++ /* REV AES data not needed anymore, free it */
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ break;
++ default:
++ printk(KERN_ERR "Unknown crypt-register mode: %x\n",
++ cr_cont->ctl.crypt.mode);
++
++ }
++ if (cr_cont->ctl.crypt.oper_type == OP_REG_DONE) {
++ if (sa_ctx->state == STATE_UNREGISTERED)
++ sa_ctx->state = STATE_REGISTERED;
++ if (sa_ctx->reg_cb)
++ sa_ctx->reg_cb(sa_ctx, failed);
++ }
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++}
++
++static void irqcb_recv(struct qm_queue *queue)
++{
++ u32 phys;
++
++ queue_ack_irq(queue);
++ while ((phys = queue_get_entry(queue)))
++ recv_pack(queue, phys);
++}
++
++static int init_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
++{
++ dir->npe_ctx = dma_pool_alloc(sa_ctx->master->dmapool,
++ sa_ctx->gfp_flags, &dir->npe_ctx_phys);
++ if (!dir->npe_ctx) {
++ return 1;
++ }
++ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
++ return 0;
++}
++
++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags)
++{
++ struct ix_sa_ctx *sa_ctx;
++ struct ix_sa_master *master = &sa_master;
++ struct npe_info *npe = dev_get_drvdata(master->npe_dev);
++
++ /* first check if Microcode was downloaded into this NPE */
++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
++ printk(KERN_ERR "%s not running\n", npe->plat->name);
++ return NULL;
++ }
++ switch (npe->img_info[1]) {
++ case 4:
++ case 5:
++ break;
++ default:
++ /* No crypto Microcode */
++ return NULL;
++ }
++ if (!try_module_get(THIS_MODULE)) {
++ return NULL;
++ }
++
++ sa_ctx = kzalloc(sizeof(struct ix_sa_ctx) + priv_len, flags);
++ if (!sa_ctx) {
++ goto err_put;
++ }
++
++ sa_ctx->master = master;
++ sa_ctx->gfp_flags = flags;
++
++ if (init_sa_dir(sa_ctx, &sa_ctx->encrypt))
++ goto err_free;
++ if (init_sa_dir(sa_ctx, &sa_ctx->decrypt)) {
++ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
++ goto err_free;
++ }
++ if (priv_len)
++ sa_ctx->priv = sa_ctx + 1;
++
++ atomic_set(&sa_ctx->use_cnt, 1);
++ return sa_ctx;
++
++err_free:
++ kfree(sa_ctx);
++err_put:
++ module_put(THIS_MODULE);
++ return NULL;
++}
++
++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx)
++{
++ sa_ctx->state = STATE_UNLOADING;
++ if (atomic_dec_and_test(&sa_ctx->use_cnt))
++ ix_sa_ctx_destroy(sa_ctx);
++ else
++ printk("ix_sa_ctx_free -> delayed: %p %d\n",
++ sa_ctx, atomic_read(&sa_ctx->use_cnt));
++}
++
++/* http://www.ietf.org/rfc/rfc2104.txt */
++#define HMAC_IPAD_VALUE 0x36
++#define HMAC_OPAD_VALUE 0x5C
++#define PAD_BLOCKLEN 64
++
++static int register_chain_var(struct ix_sa_ctx *sa_ctx,
++ unsigned char *pad, u32 target, int init_len, u32 ctx_addr, int oper)
++{
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont)
++ return -ENOMEM;
++
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.auth_offs = 0;
++ cr_cont->ctl.crypt.auth_len =cpu_to_npe16(PAD_BLOCKLEN);
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(ctx_addr);
++
++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
++ if (!cont) {
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ return -ENOMEM;
++ }
++
++ cont->data = pad;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(PAD_BLOCKLEN);
++ cont->eth.pkt_len = 0;
++
++ cont->eth.phys_addr = cpu_to_npe32(dma_map_single(
++ sa_ctx->master->npe_dev, pad, PAD_BLOCKLEN, DMA_TO_DEVICE));
++
++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
++ cr_cont->ctl.crypt.oper_type = oper;
++
++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(target);
++ cr_cont->ctl.crypt.mode = NPE_OP_HASH_GEN_ICV;
++ cr_cont->ctl.crypt.init_len = init_len;
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
++ atomic_dec(&sa_ctx->use_cnt);
++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev),
++ cont);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ return -ENOMEM;
++ }
++ return 0;
++}
++
++/* Return value
++ * 0 if nothing registered,
++ * 1 if something registered and
++ * < 0 on error
++ */
++static int ix_sa_ctx_setup_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_hash_algo *algo, int len, int oper, int encrypt)
++{
++ unsigned char *ipad, *opad;
++ u32 itarget, otarget, ctx_addr;
++ unsigned char *cinfo;
++ int init_len, i, ret = 0;
++ struct qm_qmgr *qmgr;
++ struct ix_sa_dir *dir;
++ u32 cfgword;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++
++ qmgr = dev_get_drvdata(sa_ctx->master->sendq->dev);
++
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++ sa_ctx->h_algo = algo;
++
++ if (!algo) {
++ dir->npe_mode |= NPE_OP_HMAC_DISABLE;
++ return 0;
++ }
++ if (algo->type == HASH_TYPE_CBCMAC) {
++ dir->npe_mode |= NPE_OP_CCM_ENABLE | NPE_OP_HMAC_DISABLE;
++ return 0;
++ }
++ if (sa_ctx->h_key.len > 64 || sa_ctx->h_key.len < algo->digest_len)
++ return -EINVAL;
++ if (len > algo->digest_len || (len % 4))
++ return -EINVAL;
++ if (!len)
++ len = algo->digest_len;
++
++ sa_ctx->digest_len = len;
++
++ /* write cfg word to cryptinfo */
++ cfgword = algo->cfgword | ((len/4) << 8);
++ *(u32*)cinfo = cpu_to_be32(cfgword);
++ cinfo += sizeof(cfgword);
++
++ /* write ICV to cryptinfo */
++ memcpy(cinfo, algo->icv, algo->digest_len);
++ cinfo += algo->digest_len;
++
++ itarget = dir->npe_ctx_phys + dir->npe_ctx_idx
++ + sizeof(algo->cfgword);
++ otarget = itarget + algo->digest_len;
++
++ opad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
++ if (!opad) {
++ return -ENOMEM;
++ }
++ ipad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
++ if (!ipad) {
++ kfree(opad);
++ return -ENOMEM;
++ }
++ memcpy(ipad, sa_ctx->h_key.key, sa_ctx->h_key.len);
++ memcpy(opad, sa_ctx->h_key.key, sa_ctx->h_key.len);
++ for (i = 0; i < PAD_BLOCKLEN; i++) {
++ ipad[i] ^= HMAC_IPAD_VALUE;
++ opad[i] ^= HMAC_OPAD_VALUE;
++ }
++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
++ ctx_addr = dir->npe_ctx_phys + dir->npe_ctx_idx;
++
++ dir->npe_ctx_idx += init_len;
++ dir->npe_mode |= NPE_OP_HASH_ENABLE;
++
++ if (!encrypt)
++ dir->npe_mode |= NPE_OP_HASH_VERIFY;
++
++ /* register first chainvar */
++ ret = register_chain_var(sa_ctx, opad, otarget,
++ init_len, ctx_addr, OP_REGISTER);
++ if (ret) {
++ kfree(ipad);
++ kfree(opad);
++ return ret;
++ }
++
++ /* register second chainvar */
++ ret = register_chain_var(sa_ctx, ipad, itarget,
++ init_len, ctx_addr, oper);
++ if (ret) {
++ kfree(ipad);
++ return ret;
++ }
++
++ return 1;
++}
++
++static int gen_rev_aes_key(struct ix_sa_ctx *sa_ctx,
++ u32 keylen_cfg, int cipher_op)
++{
++ unsigned char *cinfo;
++ struct npe_crypt_cont *cr_cont;
++
++ keylen_cfg |= CIPH_ENCR | ALGO_AES | MOD_ECB;
++ sa_ctx->rev_aes = ix_sa_get_cont(sa_ctx->master);
++ if (!sa_ctx->rev_aes)
++ return -ENOMEM;
++
++ cinfo = sa_ctx->rev_aes->ctl.rev_aes_key;
++ *(u32*)cinfo = cpu_to_be32(keylen_cfg);
++ cinfo += sizeof(keylen_cfg);
++
++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont) {
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ return -ENOMEM;
++ }
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.oper_type = cipher_op;
++
++ cr_cont->ctl.crypt.crypt_offs = 0;
++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(AES_BLOCK128);
++ cr_cont->ctl.crypt.addr.rev_aes = cpu_to_npe32(
++ sa_ctx->rev_aes->phys + sizeof(keylen_cfg));
++
++ cr_cont->ctl.crypt.src_buf = 0;
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(sa_ctx->rev_aes->phys);
++ cr_cont->ctl.crypt.mode = NPE_OP_ENC_GEN_KEY;
++ cr_cont->ctl.crypt.init_len = sa_ctx->decrypt.npe_ctx_idx;
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
++ atomic_dec(&sa_ctx->use_cnt);
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
++ sa_ctx->rev_aes = NULL;
++ return -ENOMEM;
++ }
++
++ return 1;
++}
++
++/* Return value
++ * 0 if nothing registered,
++ * 1 if something registered and
++ * < 0 on error
++ */
++static int ix_sa_ctx_setup_cipher(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *algo, int cipher_op, int encrypt)
++{
++ unsigned char *cinfo;
++ int keylen, init_len;
++ u32 cipher_cfg;
++ u32 keylen_cfg = 0;
++ struct ix_sa_dir *dir;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
++
++ sa_ctx->c_algo = algo;
++
++ if (!algo)
++ return 0;
++
++ if (algo->type == CIPHER_TYPE_DES && sa_ctx->c_key.len != 8)
++ return -EINVAL;
++
++ if (algo->type == CIPHER_TYPE_3DES && sa_ctx->c_key.len != 24)
++ return -EINVAL;
++
++ keylen = 24;
++
++ if (encrypt) {
++ cipher_cfg = algo->cfgword_enc;
++ dir->npe_mode |= NPE_OP_CRYPT_ENCRYPT;
++ } else {
++ cipher_cfg = algo->cfgword_dec;
++ }
++ if (algo->type == CIPHER_TYPE_AES) {
++ switch (sa_ctx->c_key.len) {
++ case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break;
++ case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break;
++ case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break;
++ default: return -EINVAL;
++ }
++ keylen = sa_ctx->c_key.len;
++ cipher_cfg |= keylen_cfg;
++ }
++
++ /* write cfg word to cryptinfo */
++ *(u32*)cinfo = cpu_to_be32(cipher_cfg);
++ cinfo += sizeof(cipher_cfg);
++
++ /* write cipher key to cryptinfo */
++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
++ cinfo += keylen;
++
++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
++ dir->npe_ctx_idx += init_len;
++
++ dir->npe_mode |= NPE_OP_CRYPT_ENABLE;
++
++ if (algo->type == CIPHER_TYPE_AES && !encrypt) {
++ return gen_rev_aes_key(sa_ctx, keylen_cfg, cipher_op);
++ }
++
++ return 0;
++}
++
++/* returns 0 on OK, <0 on error and 1 on overflow */
++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
++ int datalen, int c_offs, int c_len, int a_offs, int a_len,
++ int hmac, char *iv, int encrypt)
++{
++ struct npe_crypt_cont *cr_cont;
++ struct npe_cont *cont;
++ u32 data_phys;
++ int ret = -ENOMEM;
++ struct ix_sa_dir *dir;
++
++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
++
++ if (sa_ctx->state != STATE_REGISTERED)
++ return -ENOENT;
++
++ cr_cont = ix_sa_get_cont(sa_ctx->master);
++ if (!cr_cont)
++ return ret;
++
++ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(dir->npe_ctx_phys);
++ cr_cont->ctl.crypt.oper_type = OP_PERFORM;
++ cr_cont->ctl.crypt.mode = dir->npe_mode;
++ cr_cont->ctl.crypt.init_len = dir->npe_ctx_idx;
++
++ if (sa_ctx->c_algo) {
++ cr_cont->ctl.crypt.crypt_offs = cpu_to_npe16(c_offs);
++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(c_len);
++ if (sa_ctx->c_algo->iv_len) {
++ if (!iv) {
++ ret = -EINVAL;
++ goto err_cr;
++ }
++ memcpy(cr_cont->ctl.crypt.iv, iv,
++ sa_ctx->c_algo->iv_len);
++ }
++ }
++
++ if (sa_ctx->h_algo) {
++ /* prepare hashing */
++ cr_cont->ctl.crypt.auth_offs = cpu_to_npe16(a_offs);
++ cr_cont->ctl.crypt.auth_len = cpu_to_npe16(a_len);
++ }
++
++ data_phys = dma_map_single(sa_ctx->master->npe_dev,
++ data, datalen, DMA_BIDIRECTIONAL);
++ if (hmac)
++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(data_phys + hmac);
++
++ /* Prepare the data ptr */
++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
++ if (!cont) {
++ goto err_unmap;
++ }
++
++ cont->data = ptr;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(datalen);
++ cont->eth.pkt_len = 0;
++
++ cont->eth.phys_addr = cpu_to_npe32(data_phys);
++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
++
++ atomic_inc(&sa_ctx->use_cnt);
++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
++ if (queue_stat(sa_ctx->master->sendq) != 2) {
++ return 0;
++ }
++
++ /* overflow */
++ printk("%s: Overflow\n", __FUNCTION__);
++ ret = -EAGAIN;
++ atomic_dec(&sa_ctx->use_cnt);
++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), cont);
++
++err_unmap:
++ dma_unmap_single(sa_ctx->master->npe_dev, data_phys, datalen,
++ DMA_BIDIRECTIONAL);
++err_cr:
++ ix_sa_return_cont(sa_ctx->master, cr_cont);
++
++ return ret;
++}
++
++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *cipher,
++ const struct ix_hash_algo *auth, int len)
++{
++ int ret = 0, sum = 0;
++ int cipher_op;
++
++ if (sa_ctx->state != STATE_UNREGISTERED)
++ return -ENOENT;
++
++ atomic_inc(&sa_ctx->use_cnt);
+
-+ixp4xx_npe-objs := ucode_dl.o npe_mh.o
-+ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/drivers/net/ixp4xx/ixp4xx_qmgr.c
---- linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,390 @@
++ cipher_op = auth ? OP_REGISTER : OP_REG_DONE;
++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, OP_REGISTER, 1)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, cipher_op, 0)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REGISTER, 1)) < 0)
++ goto out;
++ sum += ret;
++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REG_DONE, 0)) < 0)
++ goto out;
++ sum += ret;
++
++ /* Nothing registered ?
++ * Ok, then we are done and call the callback here.
++ */
++ if (!sum) {
++ if (sa_ctx->state == STATE_UNREGISTERED)
++ sa_ctx->state = STATE_REGISTERED;
++ if (sa_ctx->reg_cb)
++ sa_ctx->reg_cb(sa_ctx, 0);
++ }
++out:
++ atomic_dec(&sa_ctx->use_cnt);
++ return ret;
++}
++
++static int __init init_crypto(void)
++{
++ return init_sa_master(&sa_master);
++}
++
++static void __exit finish_crypto(void)
++{
++ release_sa_master(&sa_master);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(ix_hash_by_id);
++EXPORT_SYMBOL(ix_cipher_by_id);
++
++EXPORT_SYMBOL(ix_sa_ctx_new);
++EXPORT_SYMBOL(ix_sa_ctx_free);
++EXPORT_SYMBOL(ix_sa_ctx_setup_cipher_auth);
++EXPORT_SYMBOL(ix_sa_crypto_perform);
++
++module_init(init_crypto);
++module_exit(finish_crypto);
++
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.19/drivers/net/ixp4xx/ixp4xx_qmgr.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,474 @@
+/*
+ * qmgr.c - reimplementation of the queue configuration interface.
+ *
@@ -600,16 +1366,24 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
++#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <linux/ixp_qmgr.h>
+#include <linux/ixp_npe.h>
+
-+#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.0"
++#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.1"
+
+static struct device *qmgr_dev = NULL;
+
++static int poll_freq = 4000;
++static int poll_enable = 0;
++static u32 timer_countup_ticks;
++
++module_param(poll_freq, int, 0644);
++module_param(poll_enable, int, 0644);
++
+int queue_len(struct qm_queue *queue)
+{
+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
@@ -692,7 +1466,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ return -1;
+}
+
-+static inline int log2(int x)
++static inline int _log2(int x)
+{
+ int r=0;
+ while(x>>=1)
@@ -712,7 +1486,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ */
+static int conf_q_regs(struct qm_queue *queue)
+{
-+ int bsize = log2(queue->len/16);
++ int bsize = _log2(queue->len/16);
+ int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
+
+ /* +2, because baddr is in words and not in bytes */
@@ -721,13 +1495,74 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ return 0;
+}
+
++static void pmu_timer_restart(void)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ __asm__(" mcr p14,0,%0,c1,c1,0\n" /* write current counter */
++ : : "r" (timer_countup_ticks));
++
++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
++ " orr r1,r1,#1; "
++ " mcr p14,0,r1,c5,c1,0; " /* clear overflow */
++ " mcr p14,0,r1,c4,c1,0\n" /* enable interrupts */
++ : : : "r1");
++
++ local_irq_restore(flags);
++}
++
++static void pmu_timer_init(void)
++{
++ u32 controlRegisterMask =
++ BIT(0) | /* enable counters */
++ BIT(2); /* reset clock counter; */
++
++ /*
++ * Compute the number of xscale cycles needed between each
++ * PMU IRQ. This is done from the result of an OS calibration loop.
++ *
++ * For 533MHz CPU, 533000000 tick/s / 4000 times/sec = 138250
++ * 4000 times/sec = 37 mbufs/interrupt at line rate
++ * The pmu timer is reset to -138250 = 0xfffde3f6, to trigger an IRQ
++ * when this up counter overflows.
++ *
++ * The multiplication gives a number of instructions per second.
++ * which is close to the processor frequency, and then close to the
++ * PMU clock rate.
++ *
++ * 2 is the number of instructions per loop
++ *
++ */
++
++ timer_countup_ticks = - ((loops_per_jiffy * HZ * 2) / poll_freq);
++
++ /* enable the CCNT (clock count) timer from the PMU */
++ __asm__(" mcr p14,0,%0,c0,c1,0\n"
++ : : "r" (controlRegisterMask));
++}
++
++static void pmu_timer_disable(void)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
++ " and r1,r1,#0x1e; "
++ " mcr p14,0,r1,c4,c1,0\n" /* disable interrupts */
++ : : : "r1");
++ local_irq_restore(flags);
++}
++
+void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf)
+{
+ u32 val;
+ /* calculate the register values
+ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
-+ ne = log2(ne<<1) & 0x7;
-+ nf = log2(nf<<1) & 0x7;
++ ne = _log2(ne<<1) & 0x7;
++ nf = _log2(nf<<1) & 0x7;
+
+ /* Mask out old watermarks */
+ val = queue_read_cfg_reg(queue) & ~0xfc000000;
@@ -756,6 +1591,9 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ int offs, reg;
+ struct qm_queue *queue;
+
++ if (poll_enable)
++ pmu_timer_restart();
++
+ reg = *(qmgr->addr + QUE_INT_REG0);
+ while(reg) {
+ /*
@@ -851,6 +1689,9 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ kfree(queue);
+}
+
++
++
++
+static int qmgr_probe(struct platform_device *pdev)
+{
+ struct resource *res;
@@ -895,6 +1736,10 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0;
+ }
+
++ if (poll_enable) {
++ pmu_timer_init();
++ qmgr->irq = IRQ_IXP4XX_XSCALE_PMU;
++ }
+ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT,
+ "qmgr", qmgr);
+ if (ret) {
@@ -902,6 +1747,8 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ ret = -EIO;
+ goto out_rel;
+ }
++ if (poll_enable)
++ pmu_timer_restart();
+
+ rwlock_init(&qmgr->lock);
+ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev,
@@ -933,6 +1780,9 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+ }
+ }
+
++ if (poll_enable)
++ pmu_timer_disable();
++
+ synchronize_irq (qmgr->irq);
+ free_irq(qmgr->irq, qmgr);
+
@@ -973,235 +1823,62 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/driver
+EXPORT_SYMBOL(queue_set_irq_src);
+EXPORT_SYMBOL(queue_set_watermarks);
+EXPORT_SYMBOL(queue_len);
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac.h linux-2.6.17-owrt/drivers/net/ixp4xx/mac.h
---- linux-2.6.17/drivers/net/ixp4xx/mac.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/mac.h 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,221 @@
-+/*
-+ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/resource.h>
-+#include <linux/netdevice.h>
-+#include <linux/io.h>
-+#include <linux/mii.h>
-+#include <linux/workqueue.h>
-+#include <asm/hardware.h>
-+#include <linux/ixp_qmgr.h>
-+
-+
-+/* 32 bit offsets to be added to u32 *pointers */
-+#define MAC_TX_CNTRL1 0x00 // 0x000
-+#define MAC_TX_CNTRL2 0x01 // 0x004
-+#define MAC_RX_CNTRL1 0x04 // 0x010
-+#define MAC_RX_CNTRL2 0x05 // 0x014
-+#define MAC_RANDOM_SEED 0x08 // 0x020
-+#define MAC_THRESH_P_EMPTY 0x0c // 0x030
-+#define MAC_THRESH_P_FULL 0x0e // 0x038
-+#define MAC_BUF_SIZE_TX 0x10 // 0x040
-+#define MAC_TX_DEFER 0x14 // 0x050
-+#define MAC_RX_DEFER 0x15 // 0x054
-+#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
-+#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
-+#define MAC_SLOT_TIME 0x1c // 0x070
-+#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
-+#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
-+#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
-+#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
-+#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
-+#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
-+#define MAC_CORE_CNTRL 0x7f // 0x1fC
-+
-+/* TX Control Register 1*/
-+
-+#define TX_CNTRL1_TX_EN BIT(0)
-+#define TX_CNTRL1_DUPLEX BIT(1)
-+#define TX_CNTRL1_RETRY BIT(2)
-+#define TX_CNTRL1_PAD_EN BIT(3)
-+#define TX_CNTRL1_FCS_EN BIT(4)
-+#define TX_CNTRL1_2DEFER BIT(5)
-+#define TX_CNTRL1_RMII BIT(6)
-+
-+/* TX Control Register 2 */
-+#define TX_CNTRL2_RETRIES_MASK 0xf
-+
-+/* RX Control Register 1 */
-+#define RX_CNTRL1_RX_EN BIT(0)
-+#define RX_CNTRL1_PADSTRIP_EN BIT(1)
-+#define RX_CNTRL1_CRC_EN BIT(2)
-+#define RX_CNTRL1_PAUSE_EN BIT(3)
-+#define RX_CNTRL1_LOOP_EN BIT(4)
-+#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
-+#define RX_CNTRL1_RX_RUNT_EN BIT(6)
-+#define RX_CNTRL1_BCAST_DIS BIT(7)
-+
-+/* RX Control Register 2 */
-+#define RX_CNTRL2_DEFER_EN BIT(0)
-+
-+/* Core Control Register */
-+#define CORE_RESET BIT(0)
-+#define CORE_RX_FIFO_FLUSH BIT(1)
-+#define CORE_TX_FIFO_FLUSH BIT(2)
-+#define CORE_SEND_JAM BIT(3)
-+#define CORE_MDC_EN BIT(4)
-+
-+/* Definitions for MII access routines*/
-+
-+#define MII_REG_SHL 16
-+#define MII_ADDR_SHL 21
-+
-+#define MII_GO BIT(31)
-+#define MII_WRITE BIT(26)
-+#define MII_READ_FAIL BIT(31)
-+
-+#define MII_TIMEOUT_10TH_SECS 5
-+#define MII_10TH_SEC_IN_MILLIS 100
-+
-+/*
-+ *
-+ * Default values
-+ *
-+ */
-+
-+
-+#define MAC_TX_CNTRL1_DEFAULT (\
-+ TX_CNTRL1_TX_EN | \
-+ TX_CNTRL1_RETRY | \
-+ TX_CNTRL1_FCS_EN | \
-+ TX_CNTRL1_2DEFER | \
-+ TX_CNTRL1_PAD_EN )
-+
-+#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
-+
-+#define MAC_RX_CNTRL1_DEFAULT ( \
-+ RX_CNTRL1_PADSTRIP_EN | \
-+ RX_CNTRL1_CRC_EN | \
-+ RX_CNTRL1_RX_EN )
-+
-+#define MAC_RX_CNTRL2_DEFAULT 0x0
-+#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
-+
-+/* Thresholds determined by NPE firmware FS */
-+#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
-+#define MAC_THRESH_P_FULL_DEFAULT 0x30
-+
-+/* Number of bytes that must be in the tx fifo before
-+ * transmission commences */
-+#define MAC_BUF_SIZE_TX_DEFAULT 0x8
-+
-+/* One-part deferral values */
-+#define MAC_TX_DEFER_DEFAULT 0x15
-+#define MAC_RX_DEFER_DEFAULT 0x16
-+
-+/* Two-part deferral values... */
-+#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
-+#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
-+
-+/* This value applies to MII */
-+#define MAC_SLOT_TIME_DEFAULT 0x80
-+
-+/* This value applies to RMII */
-+#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
-+
-+#define MAC_ADDR_MASK_DEFAULT 0xFF
-+
-+#define MAC_INT_CLK_THRESH_DEFAULT 0x1
-+/* The following is a value chosen at random */
-+#define RANDOM_SEED_DEFAULT 0x8
-+
-+/* By default we must configure the MAC to generate the MDC clock*/
-+#define CORE_DEFAULT (CORE_MDC_EN)
-+
-+/* End of Intel provided register information */
-+
-+extern int
-+mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
-+extern void
-+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
-+extern void init_mdio(struct net_device *dev, int phy_id);
-+
-+struct mac_info {
-+ u32 __iomem *addr;
-+ struct resource *res;
-+ struct device *npe_dev;
-+ struct qm_qmgr *qmgr;
-+ struct qm_queue *rxq;
-+ struct qm_queue *txq;
-+ u32 irqflags;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct work_struct mdio_thread;
-+ int rxq_pkt;
-+ int unloading;
-+ struct mac_plat_info *plat;
-+};
-+
-+static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
-+{
-+ *(mac->addr + offset) = val;
-+}
-+static inline u32 mac_read_reg(struct mac_info *mac, int offset)
-+{
-+ return *(mac->addr + offset);
-+}
-+static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
-+}
-+static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
-+}
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig linux-2.6.19/drivers/net/ixp4xx/Kconfig
+--- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/Kconfig 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,48 @@
++config IXP4XX_QMGR
++ tristate "IXP4xx Queue Manager support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX Queue manager is a configurable hardware ringbuffer.
++ It is used by the NPEs to exchange data from and to the CPU.
++ You can either use this OR the Intel Access Library (IAL)
+
-+static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
-+{
-+ int i;
-+ for(i=0; i<4; i++) {
-+ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
-+ cmd >>=8;
-+ }
-+}
++config IXP4XX_NPE
++ tristate "IXP4xx NPE support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX NPE driver supports the 3 CPU co-processors called
++ "Network Processing Engines" (NPE). It adds support fo downloading
++ the Microcode (firmware) via Hotplug or character-special-device.
++ More about this at: Documentation/networking/ixp4xx/README.
++ You can either use this OR the Intel Access Library (IAL)
+
-+#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
-+#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
-+static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
-+{
-+ int i;
-+ u32 data = 0;
-+ for(i=0; i<4; i++) {
-+ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
-+ }
-+ return data;
-+}
++config IXP4XX_FW_LOAD
++ bool "Use Firmware hotplug for Microcode download"
++ depends on IXP4XX_NPE
++ select HOTPLUG
++ select FW_LOADER
++ help
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
+
-+static inline u32 mdio_cmd(int phy_addr, int phy_reg)
-+{
-+ return phy_addr << MII_ADDR_SHL |
-+ phy_reg << MII_REG_SHL |
-+ MII_GO;
-+}
++config IXP4XX_MAC
++ tristate "IXP4xx MAC support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ depends on NET_ETHERNET
++ select MII
++ help
++ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
++ There are 2 on ixp425 and up to 5 on ixdp465.
++ You can either use this OR the Intel Access Library (IAL)
+
-+#define MAC_REG_LIST { \
-+ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
-+ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
-+ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
-+ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
-+ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
-+ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
-+ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
-+ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
-+ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
-+ MAC_INT_CLK_THRESH, \
-+ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
-+ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
-+ MAC_CORE_CNTRL \
-+}
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers/net/ixp4xx/mac_driver.c
---- linux-2.6.17/drivers/net/ixp4xx/mac_driver.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/mac_driver.c 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,578 @@
++config IXP4XX_CRYPTO
++ tristate "IXP4xx crypto support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ help
++ This driver is a generic NPE-crypto access layer.
++ You need additional code in OCF for example.
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,849 @@
+/*
+ * mac_driver.c - provide a network interface for each MAC
+ *
@@ -1219,6 +1896,8 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/err.h>
++#include <linux/dma-mapping.h>
++#include <linux/workqueue.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
@@ -1229,21 +1908,19 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+
+#define MDIO_INTERVAL (3*HZ)
+#define RX_QUEUE_PREFILL 64
++#define TX_QUEUE_PREFILL 16
+
+#define IXMAC_NAME "ixp4xx_mac"
-+#define IXMAC_VERSION "0.2.1"
++#define IXMAC_VERSION "0.3.1"
+
+#define MAC_DEFAULT_REG(mac, name) \
+ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT)
+
-+#define RX_DONE_QID 4
+#define TX_DONE_QID 31
+
-+extern int queue_send_skb(struct qm_queue *queue, struct sk_buff *skb);
-+extern int queue_fill_skb(struct qm_queue *queue, struct net_device *dev);
-+extern int queue_drain(struct qm_queue *queue);
-+extern struct sk_buff *queue_return_skb(struct qm_queue *queue);
-+
++#define DMA_ALLOC_SIZE 2048
++#define DMA_HDR_SIZE (sizeof(struct npe_cont))
++#define DMA_BUF_SIZE (DMA_ALLOC_SIZE - DMA_HDR_SIZE)
+
+/* Since the NPEs use 1 Return Q for sent frames, we need a device
+ * independent return Q. We call it tx_doneq.
@@ -1252,11 +1929,73 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ */
+
+static struct qm_queue *tx_doneq = NULL;
-+static struct qm_queue *rx_doneq = NULL;
++static int debug = -1;
++module_param(debug, int, 0);
++
++static int init_buffer(struct qm_queue *queue, int count)
++{
++ int i;
++ struct npe_cont *cont;
++
++ for (i=0; i<count; i++) {
++ cont = kmalloc(DMA_ALLOC_SIZE, GFP_KERNEL | GFP_DMA);
++ if (!cont)
++ goto err;
++
++ cont->phys = dma_map_single(queue->dev, cont, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ if (dma_mapping_error(cont->phys))
++ goto err;
++
++ cont->data = cont+1;
++ /* now the buffer is on a 32 bit boundary.
++ * we add 2 bytes for good alignment to SKB */
++ cont->data+=2;
++ cont->eth.next = 0;
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ /* also add 2 alignment bytes from cont->data*/
++ cont->eth.phys_addr = cpu_to_npe32(cont->phys+ DMA_HDR_SIZE+ 2);
++
++ dma_sync_single(queue->dev, cont->phys, DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++
++ queue_put_entry(queue, cont->phys);
++ if (queue_stat(queue) == 2) { /* overflow */
++ dma_unmap_single(queue->dev, cont->phys, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ goto err;
++ }
++ }
++ return i;
++err:
++ if (cont)
++ kfree(cont);
++ return i;
++}
++
++static int destroy_buffer(struct qm_queue *queue, int count)
++{
++ u32 phys;
++ int i;
++ struct npe_cont *cont;
++
++ for (i=0; i<count; i++) {
++ phys = queue_get_entry(queue) & ~0xf;
++ if (!phys)
++ break;
++ dma_unmap_single(queue->dev, phys, DMA_ALLOC_SIZE,
++ DMA_BIDIRECTIONAL);
++ cont = dma_to_virt(queue->dev, phys);
++ kfree(cont);
++ }
++ return i;
++}
+
+static void mac_init(struct mac_info *mac)
+{
+ MAC_DEFAULT_REG(mac, TX_CNTRL2);
++ MAC_DEFAULT_REG(mac, RANDOM_SEED);
+ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY);
+ MAC_DEFAULT_REG(mac, THRESH_P_FULL);
+ MAC_DEFAULT_REG(mac, TX_DEFER);
@@ -1288,7 +2027,10 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+static void update_duplex_mode(struct net_device *dev)
+{
+ struct mac_info *mac = netdev_priv(dev);
-+ printk("Duplex mode %s =%d\n", dev->name, mac->mii.full_duplex);
++ if (netif_msg_link(mac)) {
++ printk(KERN_DEBUG "Link of %s is %s-duplex\n", dev->name,
++ mac->mii.full_duplex ? "full" : "half");
++ }
+ if (mac->mii.full_duplex) {
+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
+ } else {
@@ -1300,48 +2042,112 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+{
+ struct mac_info *mac = netdev_priv(dev);
+
-+ if (mii_check_media(&mac->mii, 1, init)) {
++ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) {
+ update_duplex_mode(dev);
+ return 1;
+ }
+ return 0;
+}
+
++static void get_npe_stats(struct mac_info *mac, u32 *buf, int len, int reset)
++{
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ u32 phys;
++
++ memset(buf, len, 0);
++ phys = dma_map_single(mac->npe_dev, buf, len, DMA_BIDIRECTIONAL);
++ npe_mh_get_stats(npe, mac->plat, phys, reset);
++ dma_unmap_single(mac->npe_dev, phys, len, DMA_BIDIRECTIONAL);
++}
++
+static void irqcb_recv(struct qm_queue *queue)
+{
-+ struct net_device *dev;
-+ struct mac_info *mac;
-+ struct sk_buff *skb;
++ struct net_device *dev = queue->cb_data;
+
+ queue_ack_irq(queue);
-+ skb = queue_return_skb(queue);
-+ while (skb) {
-+ int rc;
-+ dev = skb->dev;
-+ mac = netdev_priv(dev);
-+ skb->protocol = eth_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ rc = netif_rx(skb);
-+ if (rc == NET_RX_DROP) {
-+ mac->stat.rx_dropped++;
-+ } else {
++ queue_disable_irq(queue);
++ if (netif_running(dev))
++ netif_rx_schedule(dev);
++}
++
++int ix_recv(struct net_device *dev, int *budget, struct qm_queue *queue)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct sk_buff *skb;
++ u32 phys;
++ struct npe_cont *cont;
++
++ while (*budget > 0 && netif_running(dev) ) {
++ int len;
++ phys = queue_get_entry(queue) & ~0xf;
++ if (!phys)
++ break;
++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE,
++ DMA_FROM_DEVICE);
++ cont = dma_to_virt(queue->dev, phys);
++ len = npe_to_cpu16(cont->eth.pkt_len) -4; /* strip FCS */
++
++ if (unlikely(netif_msg_rx_status(mac))) {
++ printk(KERN_DEBUG "%s: RX packet size: %u\n",
++ dev->name, len);
++ queue_state(mac->rxq);
++ queue_state(mac->rxdoneq);
++ }
++ skb = dev_alloc_skb(len + 2);
++ if (likely(skb)) {
++ skb->dev = dev;
++ skb_reserve(skb, 2);
++ dma_sync_single(queue->dev, cont->eth.phys_addr, len,
++ DMA_FROM_DEVICE);
++#ifdef CONFIG_NPE_ADDRESS_COHERENT
++ /* swap the payload of the SKB */
++ {
++ u32 *t = (u32*)(skb->data-2);
++ u32 *s = (u32*)(cont->data-2);
++ int i, j = (len+5)/4;
++ for (i=0; i<j; i++)
++ t[i] = cpu_to_be32(s[i]);
++ }
++#else
++ eth_copy_and_sum(skb, cont->data, len, 0);
++#endif
++ skb_put(skb, len);
++ skb->protocol = eth_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ netif_receive_skb(skb);
+ mac->stat.rx_packets++;
+ mac->stat.rx_bytes += skb->len;
++ } else {
++ mac->stat.rx_dropped++;
+ }
-+
-+ if (!mac->unloading)
-+ queue_fill_skb(mac->rxq, dev);
-+ else
-+ mac->rxq_pkt--;
-+
-+ skb = queue_return_skb(queue);
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, DMA_TO_DEVICE);
++ queue_put_entry(mac->rxq, phys);
++ dev->quota--;
++ (*budget)--;
+ }
++
++ return !budget;
+}
+
-+void irqcb_txdone(struct qm_queue *queue)
++static int ix_poll(struct net_device *dev, int *budget)
+{
-+ queue_ack_irq(queue);
-+ while (queue_drain(queue));
++ struct mac_info *mac = netdev_priv(dev);
++ struct qm_queue *queue = mac->rxdoneq;
++
++ for (;;) {
++ if (ix_recv(dev, budget, queue))
++ return 1;
++ netif_rx_complete(dev);
++ queue_enable_irq(queue);
++ if (!queue_len(queue))
++ break;
++ queue_disable_irq(queue);
++ if (netif_rx_reschedule(dev, 0))
++ break;
++ }
++ return 0;
+}
+
+static void ixmac_set_rx_mode (struct net_device *dev)
@@ -1380,46 +2186,118 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+{
+ struct mac_info *mac = netdev_priv(dev);
+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ u32 buf[NPE_STAT_NUM];
+ int i;
++ u32 phys;
+
-+ /* first check if Microcode was downloaded into this NPE */
++ /* first check if the NPE is up and running */
+ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
-+ printk(KERN_ERR "Missing microcode for %s\n", npe->plat->name);
++ printk(KERN_ERR "%s: %s not running\n", dev->name,
++ npe->plat->name);
+ return -EIO;
+ }
-+
-+ for (i=0; i<RX_QUEUE_PREFILL; i++) {
-+ queue_fill_skb(mac->rxq, dev);
++ if (npe_mh_status(npe)) {
++ printk(KERN_ERR "%s: %s not responding\n", dev->name,
++ npe->plat->name);
++ return -EIO;
++ }
++ mac->txq_pkt += init_buffer(mac->txq, TX_QUEUE_PREFILL - mac->txq_pkt);
++ mac->rxq_pkt += init_buffer(mac->rxq, RX_QUEUE_PREFILL - mac->rxq_pkt);
++
++ queue_enable_irq(mac->rxdoneq);
++
++ /* drain all buffers from then RX-done-q to make the IRQ happen */
++ while ((phys = queue_get_entry(mac->rxdoneq) & ~0xf)) {
++ struct npe_cont *cont;
++ cont = dma_to_virt(mac->rxdoneq->dev, phys);
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = 0;
++ dma_sync_single(mac->rxdoneq->dev, phys, DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(mac->rxq, phys);
+ }
-+ mac->rxq_pkt += RX_QUEUE_PREFILL;
-+
+ mac_init(mac);
-+ npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID);
-+ mac_set_uniaddr(dev);
++ npe_mh_set_rxqid(npe, mac->plat, mac->plat->rxdoneq_id);
++ get_npe_stats(mac, buf, sizeof(buf), 1); /* reset stats */
++ get_npe_stats(mac, buf, sizeof(buf), 0);
++ /*
++ * if the extended stats contain random values
++ * the NPE image lacks extendet statistic counters
++ */
++ for (i=NPE_STAT_NUM_BASE; i<NPE_STAT_NUM; i++) {
++ if (buf[i] >10000)
++ break;
++ }
++ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM;
++ mac->npe_stat_num += NPE_Q_STAT_NUM;
+
++ mac_set_uniaddr(dev);
+ media_check(dev, 1);
-+
+ ixmac_set_rx_mode(dev);
-+
+ netif_start_queue(dev);
+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
++ if (netif_msg_ifup(mac)) {
++ printk(KERN_DEBUG "%s: open " IXMAC_NAME
++ " RX queue %d bufs, TX queue %d bufs\n",
++ dev->name, mac->rxq_pkt, mac->txq_pkt);
++ }
+ return 0;
+}
+
+static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+ struct mac_info *mac = netdev_priv(dev);
++ struct npe_cont *cont;
++ u32 phys;
++ struct qm_queue *queue = mac->txq;
+
-+ if (queue_send_skb(mac->txq, skb)) {
-+ mac->stat.tx_packets++;
-+ mac->stat.tx_bytes += skb->len;
-+ } else {
-+ mac->stat.tx_errors++;
++ if (unlikely(skb->len > DMA_BUF_SIZE)) {
+ dev_kfree_skb(skb);
++ mac->stat.tx_errors++;
++ return NETDEV_TX_OK;
+ }
++ phys = queue_get_entry(tx_doneq) & ~0xf;
++ if (!phys)
++ goto busy;
++ cont = dma_to_virt(queue->dev, phys);
++#ifdef CONFIG_NPE_ADDRESS_COHERENT
++ /* swap the payload of the SKB */
++ {
++ u32 *s = (u32*)(skb->data-2);
++ u32 *t = (u32*)(cont->data-2);
++ int i,j = (skb->len+5) / 4;
++ for (i=0; i<j; i++)
++ t[i] = cpu_to_be32(s[i]);
++ }
++#else
++ //skb_copy_and_csum_dev(skb, cont->data);
++ memcpy(cont->data, skb->data, skb->len);
++#endif
++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
++ cont->eth.pkt_len = cpu_to_npe16(skb->len);
++ /* disable VLAN functions in NPE image for now */
++ cont->eth.flags = 0;
++ dma_sync_single(queue->dev, phys, skb->len + DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(queue, phys);
++ if (queue_stat(queue) == 2) { /* overflow */
++ queue_put_entry(tx_doneq, phys);
++ goto busy;
++ }
++ dev_kfree_skb(skb);
+
++ mac->stat.tx_packets++;
++ mac->stat.tx_bytes += skb->len;
+ dev->trans_start = jiffies;
-+ return 0;
++ if (netif_msg_tx_queued(mac)) {
++ printk(KERN_DEBUG "%s: TX packet size %u\n",
++ dev->name, skb->len);
++ queue_state(mac->txq);
++ queue_state(tx_doneq);
++ }
++ return NETDEV_TX_OK;
++busy:
++ return NETDEV_TX_BUSY;
+}
+
+static int ixmac_close (struct net_device *dev)
@@ -1427,20 +2305,18 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ struct mac_info *mac = netdev_priv(dev);
+
+ netif_stop_queue (dev);
++ queue_disable_irq(mac->rxdoneq);
+
-+ if (mac->mdio_thread.pending)
-+ cancel_rearming_delayed_work(&mac->mdio_thread);
++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
+
++ cancel_rearming_delayed_work(&(mac->mdio_thread));
+
-+ /* After doing all our business, the rxfreeq must
-+ * carry as much packets as we gave it during setup.
-+ * Here we calc the missing packets.
-+ */
-+ mac->rxq_pkt -= queue_len(mac->rxq);
-+
-+ while (queue_drain(mac->txq));
-+ while (queue_drain(mac->rxq));
-+
++ if (netif_msg_ifdown(mac)) {
++ printk(KERN_DEBUG "%s: close " IXMAC_NAME
++ " RX queue %d bufs, TX queue %d bufs\n",
++ dev->name, mac->rxq_pkt, mac->txq_pkt);
++ }
+ return 0;
+}
+
@@ -1451,8 +2327,6 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+
+ if (!netif_running(dev))
+ return -EINVAL;
-+
-+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
@@ -1528,17 +2402,73 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ }
+}
+
++static struct {
++ const char str[ETH_GSTRING_LEN];
++} ethtool_stats_keys[NPE_STAT_NUM + NPE_Q_STAT_NUM] = {
++ NPE_Q_STAT_STRINGS
++ NPE_STAT_STRINGS
++};
++
++static void ixmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ memcpy(data, ethtool_stats_keys, mac->npe_stat_num * ETH_GSTRING_LEN);
++}
++
++static int ixmac_get_stats_count(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mac->npe_stat_num;
++}
++
++static u32 ixmac_get_msglevel(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mac->msg_enable;
++}
++
++static void ixmac_set_msglevel(struct net_device *dev, u32 datum)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ mac->msg_enable = datum;
++}
++
++static void ixmac_get_ethtool_stats(struct net_device *dev,
++ struct ethtool_stats *stats, u64 *data)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ u32 buf[NPE_STAT_NUM];
++
++ data[0] = queue_len(mac->rxq);
++ data[1] = queue_len(mac->rxdoneq);
++ data[2] = queue_len(mac->txq);
++ data[3] = queue_len(tx_doneq);
++
++ get_npe_stats(mac, buf, sizeof(buf), 0);
++
++ for (i=0; i<stats->n_stats-4; i++) {
++ data[i+4] = npe_to_cpu32(buf[i]);
++ }
++}
++
+static struct ethtool_ops ixmac_ethtool_ops = {
+ .get_drvinfo = ixmac_get_drvinfo,
+ .get_settings = ixmac_get_settings,
+ .set_settings = ixmac_set_settings,
+ .nway_reset = ixmac_nway_reset,
+ .get_link = ixmac_get_link,
++ .get_msglevel = ixmac_get_msglevel,
++ .set_msglevel = ixmac_set_msglevel,
+ .get_regs_len = ixmac_get_regs_len,
+ .get_regs = ixmac_get_regs,
+ .get_perm_addr = ethtool_op_get_perm_addr,
++ .get_strings = ixmac_get_strings,
++ .get_stats_count = ixmac_get_stats_count,
++ .get_ethtool_stats = ixmac_get_ethtool_stats,
+};
-+static void mac_mdio_thread (void *_data)
++
++static void mac_mdio_thread(void *_data)
+{
+ struct net_device *dev = _data;
+ struct mac_info *mac = netdev_priv(dev);
@@ -1551,7 +2481,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+{
+ struct resource *res;
+ struct mac_info *mac;
-+ struct net_device* dev;
++ struct net_device *dev;
+ struct npe_info *npe;
+ struct mac_plat_info *plat = pdev->dev.platform_data;
+ int size, ret;
@@ -1565,6 +2495,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ mac = netdev_priv(dev);
++ mac->netdev = dev;
+
+ size = res->end - res->start +1;
+ mac->res = request_mem_region(res->start, size, IXMAC_NAME);
@@ -1581,23 +2512,21 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+
+ dev->open = ixmac_open;
+ dev->hard_start_xmit = ixmac_start_xmit;
++ dev->poll = ix_poll;
+ dev->stop = ixmac_close;
+ dev->get_stats = ixmac_stats;
+ dev->do_ioctl = ixmac_ioctl;
+ dev->set_multicast_list = ixmac_set_rx_mode;
+ dev->ethtool_ops = &ixmac_ethtool_ops;
+
++ dev->weight = 16;
++ dev->tx_queue_len = 100;
++
+ mac->npe_dev = get_npe_by_id(plat->npe_id);
+ if (!mac->npe_dev) {
+ ret = -EIO;
+ goto out_unmap;
+ }
-+ if (!try_module_get(mac->npe_dev->driver->owner)) {
-+ put_device(mac->npe_dev);
-+ ret = -EIO;
-+ goto out_unmap;
-+ }
-+
+ npe = dev_get_drvdata(mac->npe_dev);
+
+ mac->rxq = request_queue(plat->rxq_id, 128);
@@ -1609,20 +2538,30 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ mac->txq = request_queue(plat->txq_id, 128);
+ if (IS_ERR(mac->txq)) {
+ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id);
-+ release_queue(mac->rxq);
+ ret = -EBUSY;
+ goto out_putmod;
+ }
++ mac->rxdoneq = request_queue(plat->rxdoneq_id, 128);
++ if (IS_ERR(mac->rxdoneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxdoneq_id);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++ mac->rxdoneq->irq_cb = irqcb_recv;
++ mac->rxdoneq->cb_data = dev;
++ queue_set_watermarks(mac->rxdoneq, 0, 0);
++ queue_set_irq_src(mac->rxdoneq, Q_IRQ_ID_NOT_E);
+
+ mac->qmgr = dev_get_drvdata(mac->rxq->dev);
+ if (register_netdev (dev)) {
-+ release_queue(mac->rxq);
-+ release_queue(mac->txq);
+ ret = -EIO;
+ goto out_putmod;
+ }
+
+ mac->plat = plat;
++ mac->npe_stat_num = NPE_STAT_NUM_BASE;
++ mac->msg_enable = netif_msg_init(debug, MAC_DEF_MSG_ENABLE);
++
+ platform_set_drvdata(pdev, dev);
+
+ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET);
@@ -1638,9 +2577,14 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ * following commands:
+ * "ip link set address 02:03:04:04:04:01 dev eth0"
+ * "ifconfig eth0 hw ether 02:03:04:04:04:07"
-+ */
-+ random_ether_addr(dev->dev_addr);
-+ dev->dev_addr[5] = plat->phy_id;
++ */
++
++ if (is_zero_ether_addr(plat->hwaddr)) {
++ random_ether_addr(dev->dev_addr);
++ dev->dev_addr[5] = plat->phy_id;
++ }
++ else
++ memcpy(dev->dev_addr, plat->hwaddr, 6);
+
+ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
+ ": %s on %s with PHY[%d] initialized\n",
@@ -1649,6 +2593,12 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ return 0;
+
+out_putmod:
++ if (mac->rxq)
++ release_queue(mac->rxq);
++ if (mac->txq)
++ release_queue(mac->txq);
++ if (mac->rxdoneq)
++ release_queue(mac->rxdoneq);
+ module_put(mac->npe_dev->driver->owner);
+out_unmap:
+ iounmap(mac->addr);
@@ -1659,17 +2609,12 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ return ret;
+}
+
-+static int mac_remove(struct platform_device *pdev)
++static void drain_npe(struct mac_info *mac)
+{
-+ struct net_device* dev = platform_get_drvdata(pdev);
-+ struct mac_info *mac = netdev_priv(dev);
+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ struct npe_cont *cont;
++ u32 phys;
+ int loop = 0;
-+ struct sk_buff *skb;
-+
-+ ixmac_close(dev);
-+
-+ mac->unloading = 1;
+
+ /* Now there are some skb hold by the NPE.
+ * We switch the MAC in loopback mode and send a pseudo packet
@@ -1677,6 +2622,9 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ * We will also try to isolate the PHY to keep the packets internal.
+ */
+
++ if (mac->txq_pkt <2)
++ mac->txq_pkt += init_buffer(tx_doneq, 5);
++
+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
@@ -1685,18 +2633,27 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ mdelay(200);
+
+ while (mac->rxq_pkt && loop++ < 2000 ) {
-+ skb = dev_alloc_skb(128);
-+ skb_put(skb, 64);
++ phys = queue_get_entry(tx_doneq) & ~0xf;
++ if (!phys)
++ break;
++ cont = dma_to_virt(queue->dev, phys);
+ /* actually the packets should never leave the system,
+ * but if they do, they shall contain 0s instead of
+ * intresting random data....
+ */
-+ memset(skb->data, 0, skb->len);
-+ queue_send_skb(mac->txq, skb);
-+
++ memset(cont->data, 0, 64);
++ cont->eth.pkt_len = 64;
++ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(mac->txq, phys);
++ if (queue_stat(mac->txq) == 2) { /* overflow */
++ queue_put_entry(tx_doneq, phys);
++ break;
++ }
+ mdelay(1);
++ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq,
++ mac->rxq_pkt);
+ }
-+
+ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
+ }
+ /* Flush MAC TX fifo to drain the bogus packages */
@@ -1706,16 +2663,32 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++}
++
++static int mac_remove(struct platform_device *pdev)
++{
++ struct net_device* dev = platform_get_drvdata(pdev);
++ struct mac_info *mac = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
-+ while (queue_drain(mac->txq));
++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
++ if (mac->rxq_pkt)
++ drain_npe(mac);
++
++ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt);
++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
++
++ if (mac->rxq_pkt || mac->txq_pkt)
++ printk("Buffers lost in NPE: RX:%d, TX:%d\n",
++ mac->rxq_pkt, mac->txq_pkt);
++
+ release_queue(mac->txq);
-+ while (queue_drain(mac->rxq));
+ release_queue(mac->rxq);
++ release_queue(mac->rxdoneq);
+
-+ module_put(mac->npe_dev->driver->owner);
-+ put_device(mac->npe_dev);
++ flush_scheduled_work();
++ return_npe_dev(mac->npe_dev);
+
+ iounmap(mac->addr);
+ release_resource(mac->res);
@@ -1738,24 +2711,6 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
+ return -EBUSY;
+ }
-+ tx_doneq->irq_cb = irqcb_txdone;
-+ /* drain the TX queue if it is half full */
-+ queue_set_watermarks(tx_doneq, 0, 64);
-+ queue_set_irq_src(tx_doneq, Q_IRQ_ID_NF);
-+ queue_enable_irq(tx_doneq);
-+
-+ /* RX Queue handles SKBs with a valid frame */
-+ rx_doneq = request_queue(RX_DONE_QID, 128);
-+ if (IS_ERR(rx_doneq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", RX_DONE_QID);
-+ return -EBUSY;
-+ }
-+ irqcb_recv(rx_doneq);
-+ rx_doneq->irq_cb = irqcb_recv;
-+ queue_set_watermarks(rx_doneq, 0, 0);
-+ queue_set_irq_src(rx_doneq, Q_IRQ_ID_NOT_E);
-+ queue_enable_irq(rx_doneq);
-+
+ return platform_driver_register(&ixp4xx_mac);
+}
+
@@ -1763,15 +2718,8 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+{
+ platform_driver_unregister(&ixp4xx_mac);
+ if (tx_doneq) {
-+ queue_disable_irq(tx_doneq);
-+ while (queue_drain(tx_doneq));
+ release_queue(tx_doneq);
+ }
-+ if (rx_doneq) {
-+ queue_disable_irq(rx_doneq);
-+ while (queue_drain(rx_doneq));
-+ release_queue(rx_doneq);
-+ }
+}
+
+module_init(init_mac);
@@ -1780,10 +2728,595 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
+
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/npe_mh.c linux-2.6.17-owrt/drivers/net/ixp4xx/npe_mh.c
---- linux-2.6.17/drivers/net/ixp4xx/npe_mh.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/npe_mh.c 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,137 @@
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/mac.h linux-2.6.19/drivers/net/ixp4xx/mac.h
+--- linux-2.6.19.orig/drivers/net/ixp4xx/mac.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/mac.h 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,275 @@
++/*
++ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/resource.h>
++#include <linux/netdevice.h>
++#include <linux/io.h>
++#include <linux/mii.h>
++#include <linux/workqueue.h>
++#include <asm/hardware.h>
++#include <linux/ixp_qmgr.h>
++
++/* 32 bit offsets to be added to u32 *pointers */
++#define MAC_TX_CNTRL1 0x00 // 0x000
++#define MAC_TX_CNTRL2 0x01 // 0x004
++#define MAC_RX_CNTRL1 0x04 // 0x010
++#define MAC_RX_CNTRL2 0x05 // 0x014
++#define MAC_RANDOM_SEED 0x08 // 0x020
++#define MAC_THRESH_P_EMPTY 0x0c // 0x030
++#define MAC_THRESH_P_FULL 0x0e // 0x038
++#define MAC_BUF_SIZE_TX 0x10 // 0x040
++#define MAC_TX_DEFER 0x14 // 0x050
++#define MAC_RX_DEFER 0x15 // 0x054
++#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
++#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
++#define MAC_SLOT_TIME 0x1c // 0x070
++#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
++#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
++#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
++#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
++#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
++#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
++#define MAC_CORE_CNTRL 0x7f // 0x1fC
++
++/* TX Control Register 1*/
++
++#define TX_CNTRL1_TX_EN BIT(0)
++#define TX_CNTRL1_DUPLEX BIT(1)
++#define TX_CNTRL1_RETRY BIT(2)
++#define TX_CNTRL1_PAD_EN BIT(3)
++#define TX_CNTRL1_FCS_EN BIT(4)
++#define TX_CNTRL1_2DEFER BIT(5)
++#define TX_CNTRL1_RMII BIT(6)
++
++/* TX Control Register 2 */
++#define TX_CNTRL2_RETRIES_MASK 0xf
++
++/* RX Control Register 1 */
++#define RX_CNTRL1_RX_EN BIT(0)
++#define RX_CNTRL1_PADSTRIP_EN BIT(1)
++#define RX_CNTRL1_CRC_EN BIT(2)
++#define RX_CNTRL1_PAUSE_EN BIT(3)
++#define RX_CNTRL1_LOOP_EN BIT(4)
++#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
++#define RX_CNTRL1_RX_RUNT_EN BIT(6)
++#define RX_CNTRL1_BCAST_DIS BIT(7)
++
++/* RX Control Register 2 */
++#define RX_CNTRL2_DEFER_EN BIT(0)
++
++/* Core Control Register */
++#define CORE_RESET BIT(0)
++#define CORE_RX_FIFO_FLUSH BIT(1)
++#define CORE_TX_FIFO_FLUSH BIT(2)
++#define CORE_SEND_JAM BIT(3)
++#define CORE_MDC_EN BIT(4)
++
++/* Definitions for MII access routines*/
++
++#define MII_REG_SHL 16
++#define MII_ADDR_SHL 21
++
++#define MII_GO BIT(31)
++#define MII_WRITE BIT(26)
++#define MII_READ_FAIL BIT(31)
++
++#define MII_TIMEOUT_10TH_SECS 5
++#define MII_10TH_SEC_IN_MILLIS 100
++
++/*
++ *
++ * Default values
++ *
++ */
++
++#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
++
++#define MAC_TX_CNTRL1_DEFAULT (\
++ TX_CNTRL1_TX_EN | \
++ TX_CNTRL1_RETRY | \
++ TX_CNTRL1_FCS_EN | \
++ TX_CNTRL1_2DEFER | \
++ TX_CNTRL1_PAD_EN )
++
++#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
++
++#define MAC_RX_CNTRL1_DEFAULT ( \
++ RX_CNTRL1_PADSTRIP_EN | \
++ RX_CNTRL1_CRC_EN | \
++ RX_CNTRL1_RX_EN )
++
++#define MAC_RX_CNTRL2_DEFAULT 0x0
++#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
++
++/* Thresholds determined by NPE firmware FS */
++#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
++#define MAC_THRESH_P_FULL_DEFAULT 0x30
++
++/* Number of bytes that must be in the tx fifo before
++ * transmission commences */
++#define MAC_BUF_SIZE_TX_DEFAULT 0x8
++
++/* One-part deferral values */
++#define MAC_TX_DEFER_DEFAULT 0x15
++#define MAC_RX_DEFER_DEFAULT 0x16
++
++/* Two-part deferral values... */
++#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
++#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
++
++/* This value applies to MII */
++#define MAC_SLOT_TIME_DEFAULT 0x80
++
++/* This value applies to RMII */
++#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
++
++#define MAC_ADDR_MASK_DEFAULT 0xFF
++
++#define MAC_INT_CLK_THRESH_DEFAULT 0x1
++/* The following is a value chosen at random */
++#define MAC_RANDOM_SEED_DEFAULT 0x8
++
++/* By default we must configure the MAC to generate the MDC clock*/
++#define CORE_DEFAULT (CORE_MDC_EN)
++
++/* End of Intel provided register information */
++
++extern int
++mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
++extern void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
++extern void init_mdio(struct net_device *dev, int phy_id);
++
++struct mac_info {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct device *npe_dev;
++ struct net_device *netdev;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *rxq;
++ struct qm_queue *txq;
++ struct qm_queue *rxdoneq;
++ u32 irqflags;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct work_struct mdio_thread;
++ int rxq_pkt;
++ int txq_pkt;
++ int unloading;
++ struct mac_plat_info *plat;
++ int npe_stat_num;
++ spinlock_t rx_lock;
++ u32 msg_enable;
++};
++
++static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
++{
++ *(mac->addr + offset) = val;
++}
++static inline u32 mac_read_reg(struct mac_info *mac, int offset)
++{
++ return *(mac->addr + offset);
++}
++static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
++}
++static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
++}
++
++static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
++{
++ int i;
++ for(i=0; i<4; i++) {
++ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
++ cmd >>=8;
++ }
++}
++
++#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
++#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
++static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
++{
++ int i;
++ u32 data = 0;
++ for(i=0; i<4; i++) {
++ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
++ }
++ return data;
++}
++
++static inline u32 mdio_cmd(int phy_addr, int phy_reg)
++{
++ return phy_addr << MII_ADDR_SHL |
++ phy_reg << MII_REG_SHL |
++ MII_GO;
++}
++
++#define MAC_REG_LIST { \
++ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
++ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
++ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
++ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
++ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
++ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
++ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
++ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
++ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
++ MAC_INT_CLK_THRESH, \
++ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
++ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
++ MAC_CORE_CNTRL \
++}
++
++#define NPE_STAT_NUM 34
++#define NPE_STAT_NUM_BASE 22
++#define NPE_Q_STAT_NUM 4
++
++#define NPE_Q_STAT_STRINGS \
++ {"RX ready to use queue len "}, \
++ {"RX received queue len "}, \
++ {"TX to be send queue len "}, \
++ {"TX done queue len "},
++
++#define NPE_STAT_STRINGS \
++ {"StatsAlignmentErrors "}, \
++ {"StatsFCSErrors "}, \
++ {"StatsInternalMacReceiveErrors "}, \
++ {"RxOverrunDiscards "}, \
++ {"RxLearnedEntryDiscards "}, \
++ {"RxLargeFramesDiscards "}, \
++ {"RxSTPBlockedDiscards "}, \
++ {"RxVLANTypeFilterDiscards "}, \
++ {"RxVLANIdFilterDiscards "}, \
++ {"RxInvalidSourceDiscards "}, \
++ {"RxBlackListDiscards "}, \
++ {"RxWhiteListDiscards "}, \
++ {"RxUnderflowEntryDiscards "}, \
++ {"StatsSingleCollisionFrames "}, \
++ {"StatsMultipleCollisionFrames "}, \
++ {"StatsDeferredTransmissions "}, \
++ {"StatsLateCollisions "}, \
++ {"StatsExcessiveCollsions "}, \
++ {"StatsInternalMacTransmitErrors"}, \
++ {"StatsCarrierSenseErrors "}, \
++ {"TxLargeFrameDiscards "}, \
++ {"TxVLANIdFilterDiscards "}, \
++\
++ {"RxValidFramesTotalOctets "}, \
++ {"RxUcastPkts "}, \
++ {"RxBcastPkts "}, \
++ {"RxMcastPkts "}, \
++ {"RxPkts64Octets "}, \
++ {"RxPkts65to127Octets "}, \
++ {"RxPkts128to255Octets "}, \
++ {"RxPkts256to511Octets "}, \
++ {"RxPkts512to1023Octets "}, \
++ {"RxPkts1024to1518Octets "}, \
++ {"RxInternalNPEReceiveErrors "}, \
++ {"TxInternalNPETransmitErrors "}
++
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/Makefile linux-2.6.19/drivers/net/ixp4xx/Makefile
+--- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/Makefile 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,7 @@
++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
++obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
++obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
++
++ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o
++ixp4xx_mac-objs := mac_driver.o phy.o
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/npe.c linux-2.6.19/drivers/net/ixp4xx/npe.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/npe.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/npe.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,291 @@
++
++#include <linux/ixp_npe.h>
++#include <asm/hardware.h>
++
++#define RESET_NPE_PARITY 0x0800
++#define PARITY_BIT_MASK 0x3F00FFFF
++#define CONFIG_CTRL_REG_MASK 0x3F3FFFFF
++#define MAX_RETRIES 1000000
++#define NPE_PHYS_REG 32
++#define RESET_MBST_VAL 0x0000F0F0
++#define NPE_REGMAP 0x0000001E
++#define INSTR_WR_REG_SHORT 0x0000C000
++#define INSTR_WR_REG_BYTE 0x00004000
++#define MASK_ECS_REG_0_NEXTPC 0x1FFF0000
++
++#define INSTR_RD_FIFO 0x0F888220
++#define INSTR_RESET_MBOX 0x0FAC8210
++
++#define ECS_REG_0_LDUR 8
++#define ECS_REG_1_CCTXT 16
++#define ECS_REG_1_SELCTXT 0
++
++#define ECS_BG_CTXT_REG_0 0x00
++#define ECS_BG_CTXT_REG_1 0x01
++#define ECS_BG_CTXT_REG_2 0x02
++#define ECS_PRI_1_CTXT_REG_0 0x04
++#define ECS_PRI_1_CTXT_REG_1 0x05
++#define ECS_PRI_1_CTXT_REG_2 0x06
++#define ECS_PRI_2_CTXT_REG_0 0x08
++#define ECS_PRI_2_CTXT_REG_1 0x09
++#define ECS_PRI_2_CTXT_REG_2 0x0A
++#define ECS_DBG_CTXT_REG_0 0x0C
++#define ECS_DBG_CTXT_REG_1 0x0D
++#define ECS_DBG_CTXT_REG_2 0x0E
++#define ECS_INSTRUCT_REG 0x11
++
++#define ECS_BG_CTXT_REG_0_RESET 0xA0000000
++#define ECS_BG_CTXT_REG_1_RESET 0x01000000
++#define ECS_BG_CTXT_REG_2_RESET 0x00008000
++#define ECS_PRI_1_CTXT_REG_0_RESET 0x20000080
++#define ECS_PRI_1_CTXT_REG_1_RESET 0x01000000
++#define ECS_PRI_1_CTXT_REG_2_RESET 0x00008000
++#define ECS_PRI_2_CTXT_REG_0_RESET 0x20000080
++#define ECS_PRI_2_CTXT_REG_1_RESET 0x01000000
++#define ECS_PRI_2_CTXT_REG_2_RESET 0x00008000
++#define ECS_DBG_CTXT_REG_0_RESET 0x20000000
++#define ECS_DBG_CTXT_REG_1_RESET 0x00000000
++#define ECS_DBG_CTXT_REG_2_RESET 0x001E0000
++#define ECS_INSTRUCT_REG_RESET 0x1003C00F
++
++static struct { u32 reg; u32 val; } ecs_reset[] =
++{
++ { ECS_BG_CTXT_REG_0, ECS_BG_CTXT_REG_0_RESET },
++ { ECS_BG_CTXT_REG_1, ECS_BG_CTXT_REG_1_RESET },
++ { ECS_BG_CTXT_REG_2, ECS_BG_CTXT_REG_2_RESET },
++ { ECS_PRI_1_CTXT_REG_0, ECS_PRI_1_CTXT_REG_0_RESET },
++ { ECS_PRI_1_CTXT_REG_1, ECS_PRI_1_CTXT_REG_1_RESET },
++ { ECS_PRI_1_CTXT_REG_2, ECS_PRI_1_CTXT_REG_2_RESET },
++ { ECS_PRI_2_CTXT_REG_0, ECS_PRI_2_CTXT_REG_0_RESET },
++ { ECS_PRI_2_CTXT_REG_1, ECS_PRI_2_CTXT_REG_1_RESET },
++ { ECS_PRI_2_CTXT_REG_2, ECS_PRI_2_CTXT_REG_2_RESET },
++ { ECS_DBG_CTXT_REG_0, ECS_DBG_CTXT_REG_0_RESET },
++ { ECS_DBG_CTXT_REG_1, ECS_DBG_CTXT_REG_1_RESET },
++ { ECS_DBG_CTXT_REG_2, ECS_DBG_CTXT_REG_2_RESET },
++ { ECS_INSTRUCT_REG, ECS_INSTRUCT_REG_RESET }
++};
++
++/* actually I have no idea what I'm doing here !!
++ * I only rewrite the "reset" sequence the way Intel does it.
++ */
++
++static void npe_debg_preexec(struct npe_info *npe)
++{
++ u32 r = IX_NPEDL_MASK_ECS_DBG_REG_2_IF | IX_NPEDL_MASK_ECS_DBG_REG_2_IE;
++
++ npe->exec_count = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCT);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, 0);
++ npe->ctx_reg2 = npe_read_ecs_reg(npe, ECS_DBG_CTXT_REG_2);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2 | r);
++}
++
++static void npe_debg_postexec(struct npe_info *npe)
++{
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0, 0);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, npe->exec_count);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2);
++}
++
++static int
++npe_debg_inst_exec(struct npe_info *npe, u32 instr, u32 ctx, u32 ldur)
++{
++ u32 regval, wc;
++ int c = 0;
++
++ regval = IX_NPEDL_MASK_ECS_REG_0_ACTIVE |
++ (ldur << ECS_REG_0_LDUR);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0 , regval);
++ /* set CCTXT at ECS DEBUG L3 to specify in which context
++ * to execute the instruction
++ */
++ regval = (ctx << ECS_REG_1_CCTXT) |
++ (ctx << ECS_REG_1_SELCTXT);
++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_1, regval);
++
++ /* clear the pipeline */
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++
++ /* load NPE instruction into the instruction register */
++ npe_write_ecs_reg(npe, ECS_INSTRUCT_REG, instr);
++ /* we need this value later to wait for
++ * completion of NPE execution step
++ */
++ wc = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STEP);
++
++ /* Watch Count register increments when NPE completes an instruction */
++ while (wc == npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC) &&
++ ++c < MAX_RETRIES);
++
++ if (c >= MAX_RETRIES) {
++ printk(KERN_ERR "%s reset:npe_debg_inst_exec(): Timeout\n",
++ npe->plat->name);
++ return 1;
++ }
++ return 0;
++}
++
++static int npe_logical_reg_write8(struct npe_info *npe, u32 addr, u32 val)
++{
++ u32 instr;
++ val &= 0xff;
++ /* here we build the NPE assembler instruction:
++ * mov8 d0, #0 */
++ instr = INSTR_WR_REG_BYTE | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1f) << (18-5);/* higher 3 bits to CoProc instr. */
++ /* and execute it */
++ return npe_debg_inst_exec(npe, instr, 0, 1);
++}
++
++static int npe_logical_reg_write16(struct npe_info *npe, u32 addr, u32 val)
++{
++ u32 instr;
++ /* here we build the NPE assembler instruction:
++ * mov16 d0, #0 */
++ val &= 0xffff;
++ instr = INSTR_WR_REG_SHORT | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1f) << (18-5);/* higher 11 bits to CoProc instr. */
++ /* and execute it */
++ return npe_debg_inst_exec(npe, instr, 0, 1);
++}
++
++static int npe_logical_reg_write32(struct npe_info *npe, u32 addr, u32 val)
++{
++ /* write in 16 bit steps first the high and then the low value */
++ npe_logical_reg_write16(npe, addr, val >> 16);
++ return npe_logical_reg_write16(npe, addr+2, val & 0xffff);
++}
++
++void npe_reset(struct npe_info *npe)
++{
++ u32 reg, cfg_ctrl;
++ int i;
++ struct { u32 reset; int addr; int size; } ctx_reg[] = {
++ { 0x80, 0x1b, 8 },
++ { 0, 0x1c, 16 },
++ { 0x820, 0x1e, 16 },
++ { 0, 0x1f, 8 }
++ }, *cr;
++
++ cfg_ctrl = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
++ cfg_ctrl |= 0x3F000000;
++ /* disable the parity interrupt */
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, cfg_ctrl & PARITY_BIT_MASK);
++
++ npe_debg_preexec(npe);
++
++ /* clear the FIFOs */
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WFIFO) ==
++ IX_NPEDL_MASK_WFIFO_VALID);
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
++ IX_NPEDL_MASK_STAT_OFNE)
++ {
++ u32 reg;
++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_FIFO);
++ printk("%s reset: Read FIFO:=%x\n", npe->plat->name, reg);
++ }
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
++ IX_NPEDL_MASK_STAT_IFNE) {
++ npe_debg_inst_exec(npe, INSTR_RD_FIFO, 0, 0);
++ }
++
++ /* Reset the mailbox reg */
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_MBST, RESET_MBST_VAL);
++ npe_debg_inst_exec(npe, INSTR_RESET_MBOX, 0, 0);
++
++ /* Reset the physical registers in the NPE register file */
++ for (i=0; i<NPE_PHYS_REG; i++) {
++ npe_logical_reg_write16(npe, NPE_REGMAP, i >> 1);
++ npe_logical_reg_write32(npe, (i&1) *4, 0);
++ }
++
++ /* Reset the context store. Iterate over the 16 ctx s */
++ for(i=0; i<16; i++) {
++ for (reg=0; reg<4; reg++) {
++ /* There is no (STEVT) register for Context 0.
++ * ignore if register=0 and ctx=0 */
++ if (!(reg || i))
++ continue;
++ /* Context 0 has no STARTPC. Instead, this value is
++ * used to set NextPC for Background ECS,
++ * to set where NPE starts executing code
++ */
++ if (!i && reg==1) {
++ u32 r;
++ r = npe_read_ecs_reg(npe, ECS_BG_CTXT_REG_0);
++ r &= ~MASK_ECS_REG_0_NEXTPC;
++ r |= (cr->reset << 16) & MASK_ECS_REG_0_NEXTPC;
++ continue;
++ }
++ cr = ctx_reg + reg;
++ switch (cr->size) {
++ case 8:
++ npe_logical_reg_write8(npe, cr->addr,
++ cr->reset);
++ break;
++ case 16:
++ npe_logical_reg_write16(npe, cr->addr,
++ cr->reset);
++ }
++ }
++ }
++ npe_debg_postexec(npe);
++
++ for (i=0; i< ARRAY_SIZE(ecs_reset); i++) {
++ npe_write_ecs_reg(npe, ecs_reset[i].reg, ecs_reset[i].val);
++ }
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT);
++
++ for (i=IX_NPEDL_REG_OFFSET_EXCT; i<=IX_NPEDL_REG_OFFSET_AP3; i+=4) {
++ npe_reg_write(npe, i, 0);
++ }
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_WC, 0);
++
++ reg = *IXP4XX_EXP_CFG2;
++ reg |= 0x800 << npe->plat->id; /* IX_FUSE_NPE[ABC] */
++ *IXP4XX_EXP_CFG2 = reg;
++ reg &= ~(0x800 << npe->plat->id); /* IX_FUSE_NPE[ABC] */
++ *IXP4XX_EXP_CFG2 = reg;
++
++ npe_stop(npe);
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL,
++ cfg_ctrl & CONFIG_CTRL_REG_MASK);
++ npe->loaded = 0;
++}
++
++
++void npe_stop(struct npe_info *npe)
++{
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++}
++
++static void npe_reset_active(struct npe_info *npe, u32 reg)
++{
++ u32 regval;
++
++ regval = npe_read_ecs_reg(npe, reg);
++ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
++ npe_write_ecs_reg(npe, reg, regval);
++}
++
++void npe_start(struct npe_info *npe)
++{
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0);
++
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START);
++}
++
++EXPORT_SYMBOL(npe_stop);
++EXPORT_SYMBOL(npe_start);
++EXPORT_SYMBOL(npe_reset);
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/npe_mh.c linux-2.6.19/drivers/net/ixp4xx/npe_mh.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/npe_mh.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/npe_mh.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,170 @@
+/*
+ * npe_mh.c - NPE message handler.
+ *
@@ -1846,8 +3379,14 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/npe_mh.c linux-2.6.17-owrt/drivers/net
+ j++;
+ }
+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-+ printk("Unexpected answer: Send %08x:%08x Ret %08x:%08x\n",
-+ send[0], send[1], recv[0], recv[1]);
++ if (send[0] || send[1]) {
++ /* all CMDs return the complete message as answer,
++ * only GETSTATUS returns the ImageID of the NPE
++ */
++ printk("Unexpected answer: "
++ "Send %08x:%08x Ret %08x:%08x\n",
++ send[0], send[1], recv[0], recv[1]);
++ }
+ }
+ return 0;
+}
@@ -1856,13 +3395,25 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/npe_mh.c linux-2.6.17-owrt/drivers/net
+#define PORT 1
+#define MAC 2
+
++#define IX_ETHNPE_NPE_GETSTATUS 0x00
+#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01
++#define IX_ETHNPE_GETSTATS 0x04
++#define IX_ETHNPE_RESETSTATS 0x05
+#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E
+#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B
+#define IX_ETHNPE_SETLOOPBACK_MODE 0x12
+
+#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf))
+
++int npe_mh_status(struct npe_info *npe)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_NPE_GETSTATUS;
++ return send_message(npe, &msg);
++}
++
+int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp,
+ u8 *macaddr)
+{
@@ -1917,13 +3468,28 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/npe_mh.c linux-2.6.17-owrt/drivers/net
+ return 0;
+}
+
++int npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys,
++ int reset)
++{
++ struct npe_mh_msg msg;
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = reset ? IX_ETHNPE_RESETSTATS : IX_ETHNPE_GETSTATS;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.data[1] = cpu_to_npe32(cpu_to_be32(phys));
++
++ return send_message(npe, &msg);
++}
++
++
++EXPORT_SYMBOL(npe_mh_status);
+EXPORT_SYMBOL(npe_mh_setportaddr);
+EXPORT_SYMBOL(npe_mh_disable_firewall);
+EXPORT_SYMBOL(npe_mh_set_rxqid);
+EXPORT_SYMBOL(npe_mh_npe_loopback_mode);
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/phy.c linux-2.6.17-owrt/drivers/net/ixp4xx/phy.c
---- linux-2.6.17/drivers/net/ixp4xx/phy.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/phy.c 2006-10-27 12:48:54.000000000 +0200
++EXPORT_SYMBOL(npe_mh_get_stats);
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/phy.c linux-2.6.19/drivers/net/ixp4xx/phy.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/phy.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/phy.c 2007-01-12 21:54:40.000000000 -0700
@@ -0,0 +1,113 @@
+/*
+ * phy.c - MDIO functions and mii initialisation
@@ -2038,141 +3604,10 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/phy.c linux-2.6.17-owrt/drivers/net/ix
+ mac->mii.mdio_write = mdio_write_register;
+}
+
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/qmgr_eth.c linux-2.6.17-owrt/drivers/net/ixp4xx/qmgr_eth.c
---- linux-2.6.17/drivers/net/ixp4xx/qmgr_eth.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/qmgr_eth.c 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,127 @@
-+/*
-+ * qmgr_eth.c - Glue between qmgr and MAC. Linked to mac to keep qmgr.ko
-+ * more virtual
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/skbuff.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/netdevice.h>
-+#include <linux/ixp_qmgr.h>
-+
-+#define SKB_SIZE 1688
-+
-+int queue_send_skb(struct qm_queue *queue, struct sk_buff *skb)
-+{
-+ struct npe_cont *cont;
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+
-+ cont = qmgr_get_cont(qmgr);
-+ if (!cont)
-+ return 0;
-+
-+ cont->h.skb = skb;
-+#ifndef __ARMEB__
-+ /* swap the payload of the SKB */
-+ {
-+ u32 *p = (u32*)((unsigned)skb->data & ~0x3);
-+ u32 *e = (u32*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
-+ while (p < e)
-+ *p = cpu_to_be32(*p), ++p;
-+ }
-+#endif
-+ /* fill the NPE information record */
-+ cont->ctl.eth.next = 0;
-+ cont->ctl.eth.buf_len = skb->end - skb->head;
-+ cont->ctl.eth.pkt_len = skb->len;
-+ cont->ctl.eth.phys_addr =
-+ dma_map_single(queue->dev, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ queue_put_entry(queue, cont->phys);
-+
-+ if (queue_stat(queue) == 2) { /* overflow */
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+int queue_fill_skb(struct qm_queue *queue, struct net_device *dev)
-+{
-+ struct npe_cont *cont;
-+ struct sk_buff *skb;
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ int len;
-+
-+ cont = qmgr_get_cont(qmgr);
-+ if (!cont)
-+ return 0;
-+ skb = dev_alloc_skb(SKB_SIZE);
-+ if (!skb) {
-+ qmgr_return_cont(qmgr, cont);
-+ return 0;
-+ }
-+ len = skb->end - skb->data;
-+ skb->dev = dev;
-+ cont->h.skb = skb;
-+ cont->ctl.eth.next = 0;
-+ cont->ctl.eth.buf_len = len;
-+ cont->ctl.eth.pkt_len = 0;
-+ cont->ctl.eth.phys_addr =
-+ dma_map_single(queue->dev, skb->data, len, DMA_FROM_DEVICE);
-+
-+ queue_put_entry(queue, cont->phys);
-+
-+ /* TODO: check quelen ?
-+ * The current use guarantees that this queues will never overflow.
-+ */
-+ return 1;
-+}
-+
-+int queue_drain(struct qm_queue *queue)
-+{
-+ u32 phys = *queue->acc_reg & ~0xf;
-+ struct npe_cont *cont;
-+
-+ if (!phys)
-+ return 0;
-+ cont = dma_to_virt(queue->dev, phys);
-+ cont = cont->virt;
-+ dev_kfree_skb_any(cont->h.skb);
-+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
-+ return 1;
-+}
-+
-+struct sk_buff *queue_return_skb(struct qm_queue *queue)
-+{
-+ u32 phys = *queue->acc_reg & ~0xf;
-+ struct sk_buff *skb;
-+ struct npe_cont *cont;
-+ int len, buflen;
-+
-+ if (!phys)
-+ return NULL;
-+
-+ cont = dma_to_virt(queue->dev, phys);
-+ cont = cont->virt;
-+ skb = cont->h.skb;
-+ buflen = cont->ctl.eth.buf_len;
-+ len = cont->ctl.eth.pkt_len;
-+ dma_unmap_single(queue->dev, cont->ctl.eth.phys_addr,
-+ buflen, DMA_FROM_DEVICE);
-+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
-+ skb_put(skb, len);
-+#ifndef __ARMEB__
-+ /* swap the payload of the SKB */
-+ {
-+ u32 *p = (u32*)((unsigned)skb->data & ~0x3);
-+ u32 *e = (u32*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
-+ while (p < e)
-+ *p = cpu_to_be32(*p), ++p;
-+ }
-+#endif
-+ return skb;
-+}
-+
-diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/net/ixp4xx/ucode_dl.c
---- linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/drivers/net/ixp4xx/ucode_dl.c 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,466 @@
+diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+--- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,479 @@
+/*
+ * ucode_dl.c - provide an NPE device and a char-dev for microcode download
+ *
@@ -2196,7 +3631,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+
+#include <linux/ixp_npe.h>
+
-+#define IXNPE_VERSION "IXP4XX NPE driver Version 0.2.0"
++#define IXNPE_VERSION "IXP4XX NPE driver Version 0.3.0"
+
+#define DL_MAGIC 0xfeedf00d
+#define DL_MAGIC_SWAP 0x0df0edfe
@@ -2236,28 +3671,35 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+
+static struct platform_driver ixp4xx_npe_driver;
+
-+static void npe_stop(struct npe_info *npe)
++static int match_by_npeid(struct device *dev, void *id)
+{
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ struct npe_info *npe = dev_get_drvdata(dev);
++ if (!npe->plat)
++ return 0;
++ return (npe->plat->id == *(int*)id);
+}
-+static void npe_reset_active(struct npe_info *npe, u32 reg)
-+{
-+ u32 regval;
+
-+ regval = npe_read_ecs_reg(npe, reg);
-+ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
-+ npe_write_ecs_reg(npe, reg, regval);
++struct device *get_npe_by_id(int id)
++{
++ struct device *dev = driver_find_device(&ixp4xx_npe_driver.driver,
++ NULL, &id, match_by_npeid);
++ if (dev) {
++ struct npe_info *npe = dev_get_drvdata(dev);
++ if (!try_module_get(THIS_MODULE)) {
++ put_device(dev);
++ return NULL;
++ }
++ npe->usage++;
++ }
++ return dev;
+}
+
-+static void npe_start(struct npe_info *npe)
++void return_npe_dev(struct device *dev)
+{
-+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
-+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
-+ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0);
-+
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START);
++ struct npe_info *npe = dev_get_drvdata(dev);
++ put_device(dev);
++ module_put(THIS_MODULE);
++ npe->usage--;
+}
+
+static int
@@ -2295,20 +3737,6 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+ return 0;
+}
+
-+static int match_by_npeid(struct device *dev, void *id)
-+{
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+ if (!npe->plat)
-+ return 0;
-+ return (npe->plat->id == *(int*)id);
-+}
-+
-+struct device *get_npe_by_id(int id)
-+{
-+ return driver_find_device(&ixp4xx_npe_driver.driver, NULL,
-+ &id, match_by_npeid);
-+}
-+
+static int store_npe_image(struct dl_image *image, struct device *dev)
+{
+ struct dl_block *blk;
@@ -2318,19 +3746,24 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+
+ if (!dev) {
+ dev = get_npe_by_id( (image->id >> 24) & 0xf);
-+ put_device(dev);
++ return_npe_dev(dev);
+ }
+ if (!dev)
+ return -ENODEV;
+
+ npe = dev_get_drvdata(dev);
-+
-+ if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ if (npe->loaded && (npe->usage > 0)) {
+ printk(KERN_INFO "Cowardly refusing to reload an Image "
-+ "into the running %s\n", npe->plat->name);
++ "into the used and running %s\n", npe->plat->name);
+ return 0; /* indicate success anyway... */
+ }
++ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xf)) {
++ printk(KERN_INFO "IXP46x NPE image ignored on IXP42x\n");
++ return -EIO;
++ }
++
+ npe_stop(npe);
++ npe_reset(npe);
+
+ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) {
+ if (blk->offset > image->size) {
@@ -2351,6 +3784,10 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
+ npe->plat->name, npe->img_info[1], npe->img_info[2],
+ npe->img_info[3], npe_status(npe));
++ if (npe_mh_status(npe)) {
++ printk(KERN_ERR "%s not responding\n", npe->plat->name);
++ }
++ npe->loaded = 1;
+ return 0;
+}
+
@@ -2495,6 +3932,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
+ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE);
+ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE;
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, reg);
+}
+
+static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr,
@@ -2512,14 +3950,20 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+{
+ struct npe_info *npe = dev_get_drvdata(dev);
+
++ if (npe->usage) {
++ printk("%s in use: read-only\n", npe->plat->name);
++ return count;
++ }
+ if (!strncmp(buf, "start", 5)) {
-+ printk("NPE start\n");
+ npe_start(npe);
+ }
+ if (!strncmp(buf, "stop", 4)) {
-+ printk("NPE stop\n");
+ npe_stop(npe);
+ }
++ if (!strncmp(buf, "reset", 5)) {
++ npe_stop(npe);
++ npe_reset(npe);
++ }
+ return count;
+}
+
@@ -2530,7 +3974,7 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+ struct resource *res;
+ struct npe_info *npe;
+ struct npe_plat_data *plat = pdev->dev.platform_data;
-+ int size, ret=0;
++ int err, size, ret=0;
+
+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
+ return -EIO;
@@ -2559,12 +4003,15 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+
+ platform_set_drvdata(pdev, npe);
+
-+ device_create_file(&pdev->dev, &dev_attr_state);
++ err = device_create_file(&pdev->dev, &dev_attr_state);
++ if (err)
++ goto out_rel;
+
+ npe->plat = plat;
+ disable_npe_irq(npe);
-+ if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
-+ npe_firmware_probe(&pdev->dev);
++ npe->usage = 0;
++ npe_reset(npe);
++ npe_firmware_probe(&pdev->dev);
+
+ return 0;
+
@@ -2639,9 +4086,33 @@ diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/n
+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
+
+EXPORT_SYMBOL(get_npe_by_id);
-diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-10-27 12:48:54.000000000 +0200
++EXPORT_SYMBOL(return_npe_dev);
+diff -Naur linux-2.6.19.orig/drivers/net/Kconfig linux-2.6.19/drivers/net/Kconfig
+--- linux-2.6.19.orig/drivers/net/Kconfig 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/drivers/net/Kconfig 2007-01-12 21:54:40.000000000 -0700
+@@ -190,6 +190,8 @@
+
+ source "drivers/net/arm/Kconfig"
+
++source "drivers/net/ixp4xx/Kconfig"
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+diff -Naur linux-2.6.19.orig/drivers/net/Makefile linux-2.6.19/drivers/net/Makefile
+--- linux-2.6.19.orig/drivers/net/Makefile 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/drivers/net/Makefile 2007-01-12 21:54:40.000000000 -0700
+@@ -209,6 +209,7 @@
+ obj-$(CONFIG_IRDA) += irda/
+ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+ obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
+
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.19/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-01-12 21:54:40.000000000 -0700
@@ -22,6 +22,8 @@
#ifndef _ASM_ARM_IXP4XX_H_
#define _ASM_ARM_IXP4XX_H_
@@ -2651,9 +4122,101 @@ diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.17-ow
/*
* IXP4xx Linux Memory Map:
*
-diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/npe_regs.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/npe_regs.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/npe_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/npe_regs.h 2006-10-27 12:48:54.000000000 +0200
+@@ -44,6 +46,12 @@
+ */
+
+ /*
++ * PCI Memory Space
++ */
++#define IXP4XX_PCIMEM_BASE_PHYS (0x48000000)
++#define IXP4XX_PCIMEM_REGION_SIZE (0x04000000)
++#define IXP4XX_PCIMEM_BAR_SIZE (0x01000000)
++/*
+ * Queue Manager
+ */
+ #define IXP4XX_QMGR_BASE_PHYS (0x60000000)
+@@ -322,7 +330,13 @@
+ #define PCI_ATPDMA0_LENADDR_OFFSET 0x48
+ #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
+ #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
+-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
++#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
++#define PCI_PTADMA0_AHBADDR_OFFSET 0x58
++#define PCI_PTADMA0_PCIADDR_OFFSET 0x5c
++#define PCI_PTADMA0_LENADDR_OFFSET 0x60
++#define PCI_PTADMA1_AHBADDR_OFFSET 0x64
++#define PCI_PTADMA1_PCIADDR_OFFSET 0x68
++#define PCI_PTADMA1_LENADDR_OFFSET 0x6c
+
+ /*
+ * PCI Control/Status Registers
+@@ -351,6 +365,12 @@
+ #define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+ #define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+ #define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
++#define PCI_PTADMA0_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA0_AHBADDR_OFFSET)
++#define PCI_PTADMA0_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA0_PCIADDR_OFFSET)
++#define PCI_PTADMA0_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA0_LENADDR_OFFSET)
++#define PCI_PTADMA1_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA1_AHBADDR_OFFSET)
++#define PCI_PTADMA1_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA1_PCIADDR_OFFSET)
++#define PCI_PTADMA1_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA1_LENADDR_OFFSET)
+
+ /*
+ * PCI register values and bit definitions
+@@ -607,6 +627,34 @@
+
+ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
++
++/* Fuse Bits of IXP_EXP_CFG2 */
++#define IX_FUSE_RCOMP (1 << 0)
++#define IX_FUSE_USB (1 << 1)
++#define IX_FUSE_HASH (1 << 2)
++#define IX_FUSE_AES (1 << 3)
++#define IX_FUSE_DES (1 << 4)
++#define IX_FUSE_HDLC (1 << 5)
++#define IX_FUSE_AAL (1 << 6)
++#define IX_FUSE_HSS (1 << 7)
++#define IX_FUSE_UTOPIA (1 << 8)
++#define IX_FUSE_ETH0 (1 << 9)
++#define IX_FUSE_ETH1 (1 << 10)
++#define IX_FUSE_NPEA (1 << 11)
++#define IX_FUSE_NPEB (1 << 12)
++#define IX_FUSE_NPEC (1 << 13)
++#define IX_FUSE_PCI (1 << 14)
++#define IX_FUSE_ECC (1 << 15)
++#define IX_FUSE_UTOPIA_PHY_LIMIT (3 << 16)
++#define IX_FUSE_USB_HOST (1 << 18)
++#define IX_FUSE_NPEA_ETH (1 << 19)
++#define IX_FUSE_NPEB_ETH (1 << 20)
++#define IX_FUSE_RSA (1 << 21)
++#define IX_FUSE_XSCALE_MAX_FREQ (3 << 22)
++
++#define IX_FUSE_IXP46X_ONLY IX_FUSE_XSCALE_MAX_FREQ | IX_FUSE_RSA | \
++ IX_FUSE_NPEB_ETH | IX_FUSE_NPEA_ETH | IX_FUSE_USB_HOST | IX_FUSE_ECC
++
+ #ifndef __ASSEMBLY__
+ static inline int cpu_is_ixp46x(void)
+ {
+@@ -620,6 +668,15 @@
+ #endif
+ return 0;
+ }
++
++static inline u32 ix_fuse(void)
++{
++ unsigned int fuses = ~(*IXP4XX_EXP_CFG2);
++ if (!cpu_is_ixp46x())
++ fuses &= ~IX_FUSE_IXP46X_ONLY;
++
++ return fuses;
++}
+ #endif
+
+ #endif
+diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/npe_regs.h linux-2.6.19/include/asm-arm/arch-ixp4xx/npe_regs.h
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/npe_regs.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-01-12 21:54:40.000000000 -0700
@@ -0,0 +1,82 @@
+#ifndef NPE_REGS_H
+#define NPE_REGS_H
@@ -2737,12 +4300,12 @@ diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/npe_regs.h linux-2.6.17-owrt/
+
+#endif
+
-diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/platform.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/platform.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/platform.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/platform.h 2006-10-27 12:48:54.000000000 +0200
-@@ -86,6 +86,22 @@
- unsigned long scl_pin;
- };
+diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h 2006-11-29 14:57:37.000000000 -0700
++++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h 2007-01-12 21:54:40.000000000 -0700
+@@ -89,6 +89,25 @@
+
+ struct sys_timer;
+struct npe_plat_data {
+ const char *name;
@@ -2756,17 +4319,216 @@ diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/platform.h linux-2.6.17-owrt/
+ int port_id; /* Port ID for NPE-B @ ixp465 */
+ int eth_id; /* Physical ID */
+ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
-+ int rxq_id; /* Queue ID of the RX-free q*/
++ int rxq_id; /* Queue ID of the RX-free q */
++ int rxdoneq_id; /* where incoming packets are returned */
+ int txq_id; /* Where to push the outgoing packets */
++ unsigned char hwaddr[6]; /* Desired hardware address */
++
+};
+
-
- struct sys_timer;
-
-diff -Nur linux-2.6.17/include/linux/ixp_npe.h linux-2.6.17-owrt/include/linux/ixp_npe.h
---- linux-2.6.17/include/linux/ixp_npe.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/include/linux/ixp_npe.h 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,85 @@
+ /*
+ * Frequency of clock used for primary clocksource
+ */
+diff -Naur linux-2.6.19.orig/include/linux/ixp_crypto.h linux-2.6.19/include/linux/ixp_crypto.h
+--- linux-2.6.19.orig/include/linux/ixp_crypto.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/include/linux/ixp_crypto.h 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,192 @@
++
++#ifndef IX_CRYPTO_H
++#define IX_CRYPTO_H
++
++#define MAX_KEYLEN 64
++#define NPE_CTX_LEN 80
++#define AES_BLOCK128 16
++
++#define NPE_OP_HASH_GEN_ICV 0x50
++#define NPE_OP_ENC_GEN_KEY 0xc9
++
++
++#define NPE_OP_HASH_VERIFY 0x01
++#define NPE_OP_CCM_ENABLE 0x04
++#define NPE_OP_CRYPT_ENABLE 0x08
++#define NPE_OP_HASH_ENABLE 0x10
++#define NPE_OP_NOT_IN_PLACE 0x20
++#define NPE_OP_HMAC_DISABLE 0x40
++#define NPE_OP_CRYPT_ENCRYPT 0x80
++
++#define MOD_ECB 0x0000
++#define MOD_CTR 0x1000
++#define MOD_CBC_ENC 0x2000
++#define MOD_CBC_DEC 0x3000
++#define MOD_CCM_ENC 0x4000
++#define MOD_CCM_DEC 0x5000
++
++#define ALGO_AES 0x0800
++#define CIPH_DECR 0x0000
++#define CIPH_ENCR 0x0400
++
++#define MOD_DES 0x0000
++#define MOD_TDEA2 0x0100
++#define MOD_TDEA3 0x0200
++#define MOD_AES128 0x0000
++#define MOD_AES192 0x0100
++#define MOD_AES256 0x0200
++
++#define KEYLEN_128 4
++#define KEYLEN_192 6
++#define KEYLEN_256 8
++
++#define CIPHER_TYPE_NULL 0
++#define CIPHER_TYPE_DES 1
++#define CIPHER_TYPE_3DES 2
++#define CIPHER_TYPE_AES 3
++
++#define CIPHER_MODE_ECB 1
++#define CIPHER_MODE_CTR 2
++#define CIPHER_MODE_CBC 3
++#define CIPHER_MODE_CCM 4
++
++#define HASH_TYPE_NULL 0
++#define HASH_TYPE_MD5 1
++#define HASH_TYPE_SHA1 2
++#define HASH_TYPE_CBCMAC 3
++
++#define OP_REG_DONE 1
++#define OP_REGISTER 2
++#define OP_PERFORM 3
++
++#define STATE_UNREGISTERED 0
++#define STATE_REGISTERED 1
++#define STATE_UNLOADING 2
++
++struct crypt_ctl {
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
++ u8 mode; /* NPE operation */
++ u8 init_len;
++ u16 reserved;
++#else
++ u16 reserved;
++ u8 init_len;
++ u8 mode; /* NPE operation */
++#endif
++ u8 iv[16]; /* IV for CBC mode or CTR IV for CTR mode */
++ union {
++ u32 icv;
++ u32 rev_aes;
++ } addr;
++ u32 src_buf;
++ u32 dest_buf;
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
++ u16 auth_offs; /* Authentication start offset */
++ u16 auth_len; /* Authentication data length */
++ u16 crypt_offs; /* Cryption start offset */
++ u16 crypt_len; /* Cryption data length */
++#else
++ u16 auth_len; /* Authentication data length */
++ u16 auth_offs; /* Authentication start offset */
++ u16 crypt_len; /* Cryption data length */
++ u16 crypt_offs; /* Cryption start offset */
++#endif
++ u32 aadAddr; /* Additional Auth Data Addr for CCM mode */
++ u32 crypto_ctx; /* NPE Crypto Param structure address */
++
++ /* Used by Host */
++ struct ix_sa_ctx *sa_ctx;
++ int oper_type;
++};
++
++struct npe_crypt_cont {
++ union {
++ struct crypt_ctl crypt;
++ u8 rev_aes_key[NPE_CTX_LEN];
++ } ctl;
++ struct npe_crypt_cont *next;
++ struct npe_crypt_cont *virt;
++ dma_addr_t phys;
++};
++
++struct ix_hash_algo {
++ char *name;
++ u32 cfgword;
++ int digest_len;
++ int aad_len;
++ unsigned char *icv;
++ int type;
++};
++
++struct ix_cipher_algo {
++ char *name;
++ u32 cfgword_enc;
++ u32 cfgword_dec;
++ int block_len;
++ int iv_len;
++ int type;
++ int mode;
++};
++
++struct ix_key {
++ u8 key[MAX_KEYLEN];
++ int len;
++};
++
++struct ix_sa_master {
++ struct device *npe_dev;
++ struct qm_queue *sendq;
++ struct qm_queue *recvq;
++ struct dma_pool *dmapool;
++ struct npe_crypt_cont *pool;
++ int pool_size;
++ rwlock_t lock;
++};
++
++struct ix_sa_dir {
++ unsigned char *npe_ctx;
++ dma_addr_t npe_ctx_phys;
++ int npe_ctx_idx;
++ u8 npe_mode;
++};
++
++struct ix_sa_ctx {
++ struct list_head list;
++ struct ix_sa_master *master;
++
++ const struct ix_hash_algo *h_algo;
++ const struct ix_cipher_algo *c_algo;
++ struct ix_key c_key;
++ struct ix_key h_key;
++
++ int digest_len;
++
++ struct ix_sa_dir encrypt;
++ struct ix_sa_dir decrypt;
++
++ struct npe_crypt_cont *rev_aes;
++ gfp_t gfp_flags;
++
++ int state;
++ void *priv;
++
++ void(*reg_cb)(struct ix_sa_ctx*, int);
++ void(*perf_cb)(struct ix_sa_ctx*, void*, int);
++ atomic_t use_cnt;
++};
++
++const struct ix_hash_algo *ix_hash_by_id(int type);
++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode);
++
++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags);
++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx);
++
++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
++ int datalen, int c_offs, int c_len, int a_offs, int a_len,
++ int hmac, char *iv, int encrypt);
++
++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
++ const struct ix_cipher_algo *cipher,
++ const struct ix_hash_algo *auth, int len);
++
++#endif
+diff -Naur linux-2.6.19.orig/include/linux/ixp_npe.h linux-2.6.19/include/linux/ixp_npe.h
+--- linux-2.6.19.orig/include/linux/ixp_npe.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/include/linux/ixp_npe.h 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
+ *
@@ -2779,11 +4541,34 @@ diff -Nur linux-2.6.17/include/linux/ixp_npe.h linux-2.6.17-owrt/include/linux/i
+#include <linux/miscdevice.h>
+#include <asm/hardware.h>
+
++#ifdef __ARMEB__
++#undef CONFIG_NPE_ADDRESS_COHERENT
++#else
++#define CONFIG_NPE_ADDRESS_COHERENT
++#endif
++
++#if defined(__ARMEB__) || defined (CONFIG_NPE_ADDRESS_COHERENT)
++#define npe_to_cpu32(x) (x)
++#define npe_to_cpu16(x) (x)
++#define cpu_to_npe32(x) (x)
++#define cpu_to_npe16(x) (x)
++#else
++#error NPE_DATA_COHERENT
++#define NPE_DATA_COHERENT
++#define npe_to_cpu32(x) be32_to_cpu(x)
++#define npe_to_cpu16(x) be16_to_cpu(x)
++#define cpu_to_npe32(x) cpu_to_be32(x)
++#define cpu_to_npe16(x) cpu_to_be16(x)
++#endif
++
++
+struct npe_info {
+ struct resource *res;
+ void __iomem *addr;
+ struct npe_plat_data *plat;
+ u8 img_info[4];
++ int usage;
++ int loaded;
+ u32 exec_count;
+ u32 ctx_reg2;
+};
@@ -2839,10 +4624,17 @@ diff -Nur linux-2.6.17/include/linux/ixp_npe.h linux-2.6.17-owrt/include/linux/i
+ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG);
+}
+
++extern void npe_stop(struct npe_info *npe);
++extern void npe_start(struct npe_info *npe);
++extern void npe_reset(struct npe_info *npe);
++
+extern struct device *get_npe_by_id(int id);
++extern void return_npe_dev(struct device *dev);
+
+/* NPE Messages */
+extern int
++npe_mh_status(struct npe_info *npe);
++extern int
+npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr);
+extern int
+npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp);
@@ -2850,12 +4642,14 @@ diff -Nur linux-2.6.17/include/linux/ixp_npe.h linux-2.6.17-owrt/include/linux/i
+npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid);
+extern int
+npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable);
++extern int
++npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset);
+
+#endif
-diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/ixp_qmgr.h
---- linux-2.6.17/include/linux/ixp_qmgr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/include/linux/ixp_qmgr.h 2006-10-27 12:48:54.000000000 +0200
-@@ -0,0 +1,188 @@
+diff -Naur linux-2.6.19.orig/include/linux/ixp_qmgr.h linux-2.6.19/include/linux/ixp_qmgr.h
+--- linux-2.6.19.orig/include/linux/ixp_qmgr.h 1969-12-31 17:00:00.000000000 -0700
++++ linux-2.6.19/include/linux/ixp_qmgr.h 2007-01-12 21:54:40.000000000 -0700
+@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
+ *
@@ -2870,6 +4664,7 @@ diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/
+#include <linux/if_ether.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
++#include <linux/ixp_npe.h>
+#include <asm/atomic.h>
+
+/* All offsets are in 32bit words */
@@ -2920,15 +4715,11 @@ diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/
+ void *cb_data;
+};
+
++#ifndef CONFIG_NPE_ADDRESS_COHERENT
+struct eth_ctl {
+ u32 next;
-+#ifdef __ARMEB__
+ u16 buf_len;
+ u16 pkt_len;
-+#else
-+ u16 pkt_len;
-+ u16 buf_len;
-+#endif
+ u32 phys_addr;
+ u8 dest_id;
+ u8 src_id;
@@ -2940,14 +4731,26 @@ diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/
+ u8 src_mac[ETH_ALEN];
+};
+
++#else
++struct eth_ctl {
++ u32 next;
++ u16 pkt_len;
++ u16 buf_len;
++ u32 phys_addr;
++ u16 flags;
++ u8 src_id;
++ u8 dest_id;
++ u16 vlan_tci;
++ u8 padlen;
++ u8 qos;
++ u8 dest_mac[ETH_ALEN];
++ u8 src_mac[ETH_ALEN];
++};
++#endif
++
+struct npe_cont {
-+ union {
-+ struct eth_ctl eth;
-+ } ctl;
-+ union {
-+ struct sk_buff *skb;
-+ void *ptr;
-+ } h;
++ struct eth_ctl eth;
++ void *data;
+ struct npe_cont *next;
+ struct npe_cont *virt;
+ dma_addr_t phys;
@@ -2994,7 +4797,12 @@ diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/
+
+static inline void queue_put_entry(struct qm_queue *queue, u32 entry)
+{
-+ *(queue->acc_reg) = entry;
++ *(queue->acc_reg) = npe_to_cpu32(entry);
++}
++
++static inline u32 queue_get_entry(struct qm_queue *queue)
++{
++ return cpu_to_npe32(*queue->acc_reg);
+}
+
+static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr)
diff --git a/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch b/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch
deleted file mode 100644
index 7e2a4a12df..0000000000
--- a/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-
----
- drivers/net/ixp4xx/ixp4xx_qmgr.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- linux-ixp4xx.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-15 18:52:35.000000000 +0200
-+++ linux-ixp4xx/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-15 18:54:32.000000000 +0200
-@@ -107,7 +107,7 @@ static int get_free_qspace(struct qm_qmg
- return -1;
- }
-
--static inline int log2(int x)
-+static inline int _log2(int x)
- {
- int r=0;
- while(x>>=1)
-@@ -127,7 +127,7 @@ static inline int log2(int x)
- */
- static int conf_q_regs(struct qm_queue *queue)
- {
-- int bsize = log2(queue->len/16);
-+ int bsize = _log2(queue->len/16);
- int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
-
- /* +2, because baddr is in words and not in bytes */
-@@ -141,8 +141,8 @@ void queue_set_watermarks(struct qm_queu
- u32 val;
- /* calculate the register values
- * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
-- ne = log2(ne<<1) & 0x7;
-- nf = log2(nf<<1) & 0x7;
-+ ne = _log2(ne<<1) & 0x7;
-+ nf = _log2(nf<<1) & 0x7;
-
- /* Mask out old watermarks */
- val = queue_read_cfg_reg(queue) & ~0xfc000000;
diff --git a/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch b/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch
index a808e4dfa9..d632b3045b 100644
--- a/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch
+++ b/target/linux/ixp4xx-2.6/patches/133-ixp4xx_net_driver_improve_mac_handling.patch
@@ -1,31 +1,10 @@
-Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
-@@ -100,6 +100,7 @@ struct mac_plat_info {
- int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
- int rxq_id; /* Queue ID of the RX-free q*/
- int txq_id; /* Where to push the outgoing packets */
-+ unsigned char hwaddr[6]; /* Desired hardware address */
- };
+diff -Naupr a/drivers/net/ixp4xx/mac_driver.c b/drivers/net/ixp4xx/mac_driver.c
+--- a/drivers/net/ixp4xx/mac_driver.c 2007-01-12 21:54:40.000000000 -0700
++++ b/drivers/net/ixp4xx/mac_driver.c 2007-01-12 22:27:18.000000000 -0700
+@@ -350,6 +350,16 @@ static int ixmac_open (struct net_device
+ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM;
+ mac->npe_stat_num += NPE_Q_STAT_NUM;
-
-Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
-===================================================================
---- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c
-+++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
-@@ -189,6 +189,24 @@ static int ixmac_open (struct net_device
- }
- mac->rxq_pkt += RX_QUEUE_PREFILL;
-
-+ /* printk(KERN_INFO "...Platform MAC=0x%02x%02x%02x%02x%02x%02x\n",
-+ mac->plat->hwaddr[0],
-+ mac->plat->hwaddr[1],
-+ mac->plat->hwaddr[2],
-+ mac->plat->hwaddr[3],
-+ mac->plat->hwaddr[4],
-+ mac->plat->hwaddr[5]
-+ ); */
+ /* Only use platform or random if there's currently no device hw addr */
+ if (is_zero_ether_addr(dev->dev_addr)) {
+ if (is_zero_ether_addr(mac->plat->hwaddr)) {
@@ -36,25 +15,27 @@ Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
+ memcpy(dev->dev_addr, mac->plat->hwaddr, 6);
+ }
+
- mac_init(mac);
- npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID);
mac_set_uniaddr(dev);
-@@ -434,9 +452,15 @@ static int mac_probe(struct platform_dev
- * following commands:
- * "ip link set address 02:03:04:04:04:01 dev eth0"
- * "ifconfig eth0 hw ether 02:03:04:04:04:07"
-- */
-- random_ether_addr(dev->dev_addr);
-- dev->dev_addr[5] = plat->phy_id;
-+ */
-+/* Note: moved to ixmac_open to allow notifiers to run for compiled in modules
-+ if (is_zero_ether_addr(plat->hwaddr)) {
-+ random_ether_addr(dev->dev_addr);
-+ dev->dev_addr[5] = plat->phy_id;
-+ }
-+ else
-+ memcpy(dev->dev_addr, plat->hwaddr, 6);
-+*/
+ media_check(dev, 1);
+ ixmac_set_rx_mode(dev);
+@@ -691,20 +701,6 @@ static int mac_probe(struct platform_dev
+
+ INIT_WORK(&mac->mdio_thread, mac_mdio_thread, dev);
+- /* The place of the MAC address is very system dependent.
+- * Here we use a random one to be replaced by one of the
+- * following commands:
+- * "ip link set address 02:03:04:04:04:01 dev eth0"
+- * "ifconfig eth0 hw ether 02:03:04:04:04:07"
+- */
+-
+- if (is_zero_ether_addr(plat->hwaddr)) {
+- random_ether_addr(dev->dev_addr);
+- dev->dev_addr[5] = plat->phy_id;
+- }
+- else
+- memcpy(dev->dev_addr, plat->hwaddr, 6);
+-
printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
": %s on %s with PHY[%d] initialized\n",
+ dev->name, npe->plat->name, plat->phy_id);
diff --git a/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
index 532c80080b..0f81a0a0ed 100644
--- a/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
+++ b/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
@@ -1,7 +1,6 @@
-Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig
-===================================================================
---- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig
-+++ linux-2.6.19/drivers/net/ixp4xx/Kconfig
+diff -Naupr a/drivers/net/ixp4xx/Kconfig b/drivers/net/ixp4xx/Kconfig
+--- a/drivers/net/ixp4xx/Kconfig 2007-01-12 21:54:40.000000000 -0700
++++ b/drivers/net/ixp4xx/Kconfig 2007-01-12 23:28:50.000000000 -0700
@@ -11,6 +11,7 @@ config IXP4XX_NPE
tristate "IXP4xx NPE support"
depends on ARCH_IXP4XX
@@ -33,22 +32,19 @@ Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig
config IXP4XX_MAC
tristate "IXP4xx MAC support"
depends on IXP4XX_NPE
-Index: linux-2.6.19/drivers/net/ixp4xx/Makefile
-===================================================================
---- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile
-+++ linux-2.6.19/drivers/net/ixp4xx/Makefile
-@@ -1,6 +1,7 @@
+diff -Naupr a/drivers/net/ixp4xx/Makefile b/drivers/net/ixp4xx/Makefile
+--- a/drivers/net/ixp4xx/Makefile 2007-01-12 21:54:40.000000000 -0700
++++ b/drivers/net/ixp4xx/Makefile 2007-01-12 23:28:50.000000000 -0700
+@@ -1,5 +1,6 @@
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
- obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o
+ obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
+ obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
- ixp4xx_npe-objs := ucode_dl.o npe_mh.o
- ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o
-Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
-===================================================================
---- /dev/null
-+++ linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
+diff -Naupr a/drivers/net/ixp4xx/npe_ucode.c b/drivers/net/ixp4xx/npe_ucode.c
+--- a/drivers/net/ixp4xx/npe_ucode.c 1969-12-31 17:00:00.000000000 -0700
++++ b/drivers/net/ixp4xx/npe_ucode.c 2007-01-12 23:28:50.000000000 -0700
@@ -0,0 +1,185 @@
+/*
+ * Provide an NPE platform device for microcode handling
@@ -235,10 +231,9 @@ Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
-===================================================================
---- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c
-+++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+diff -Naupr a/drivers/net/ixp4xx/ucode_dl.c b/drivers/net/ixp4xx/ucode_dl.c
+--- a/drivers/net/ixp4xx/ucode_dl.c 2007-01-12 21:54:40.000000000 -0700
++++ b/drivers/net/ixp4xx/ucode_dl.c 2007-01-12 23:28:50.000000000 -0700
@@ -16,6 +16,7 @@
#include <linux/firmware.h>
#include <linux/dma-mapping.h>
@@ -247,9 +242,9 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
#include <asm/uaccess.h>
#include <asm/io.h>
-@@ -30,6 +31,12 @@
- #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
- sizeof(struct dl_image))
+@@ -26,6 +27,12 @@
+ #define DL_MAGIC 0xfeedf00d
+ #define DL_MAGIC_SWAP 0x0df0edfe
+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
+#define IMG_REV_MINOR(id) ((id) & 0x0f)
@@ -257,9 +252,9 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
+
- #define BT_INSTR 0
- #define BT_DATA 1
-
+ #define EOF_BLOCK 0xf
+ #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
+ sizeof(struct dl_image))
@@ -38,21 +45,6 @@ enum blk_type {
data,
};
@@ -282,8 +277,8 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
struct dl_codeblock {
u32 npe_addr;
u32 size;
-@@ -134,23 +126,41 @@ struct device *get_npe_by_id(int id)
- &id, match_by_npeid);
+@@ -127,20 +119,33 @@ download_block(struct npe_info *npe, str
+ return 0;
}
-static int store_npe_image(struct dl_image *image, struct device *dev)
@@ -292,21 +287,14 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
struct dl_block *blk;
struct dl_codeblock *cb;
struct npe_info *npe;
-- int ret=0;
-+ int ret = 0;
+ int ret=0;
+ u16 crc;
if (!dev) {
- dev = get_npe_by_id( (image->id >> 24) & 0xf);
-- put_device(dev);
+ dev = get_npe_by_id(IMG_NPE(image->id));
-+ if (dev)
-+ put_device(dev);
-+ // XXX shouldn't this put_device be outside if(!dev) ?
-+ else
-+ printk(KERN_ERR "npe: cannot find npe for image %x\n", IMG_NPE(image->id));
+ return_npe_dev(dev);
}
-+
if (!dev)
return -ENODEV;
@@ -323,25 +311,9 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
+ crc = crc16(0, (u8 *) image, IMG_SIZE(image));
+
npe = dev_get_drvdata(dev);
-
-- if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
-+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
+ if (npe->loaded && (npe->usage > 0)) {
printk(KERN_INFO "Cowardly refusing to reload an Image "
- "into the running %s\n", npe->plat->name);
- return 0; /* indicate success anyway... */
-@@ -173,9 +183,9 @@ static int store_npe_image(struct dl_ima
- *(u32*)npe->img_info = cpu_to_be32(image->id);
- npe_start(npe);
-
-- printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
-+ printk(KERN_INFO "npe: firmware loaded to %s, func: %02x, rev: %x.%x, status: %x, crc: %x\n",
- npe->plat->name, npe->img_info[1], npe->img_info[2],
-- npe->img_info[3], npe_status(npe));
-+ npe->img_info[3], npe_status(npe), crc);
- return 0;
- }
-
-@@ -265,8 +275,7 @@ static ssize_t ucode_write(struct file *
+@@ -267,8 +272,7 @@ static ssize_t ucode_write(struct file *
static void npe_firmware_probe(struct device *dev)
{
@@ -351,27 +323,17 @@ Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
const struct firmware *fw_entry;
struct npe_info *npe = dev_get_drvdata(dev);
struct dl_image *image;
-@@ -388,7 +397,7 @@ static int npe_probe(struct platform_dev
-
- npe->plat = plat;
- disable_npe_irq(npe);
-- if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
-+ if (!(npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
- npe_firmware_probe(&pdev->dev);
-
- return 0;
-@@ -464,3 +473,4 @@ MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
+@@ -477,3 +481,4 @@ MODULE_AUTHOR("Christian Hohnstaedt <cho
EXPORT_SYMBOL(get_npe_by_id);
+ EXPORT_SYMBOL(return_npe_dev);
+EXPORT_SYMBOL(store_npe_image);
-Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
-@@ -86,6 +86,20 @@ struct ixp4xx_i2c_pins {
- unsigned long scl_pin;
- };
+diff -Naupr a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
+--- a/include/asm-arm/arch-ixp4xx/platform.h 2007-01-12 21:54:40.000000000 -0700
++++ b/include/asm-arm/arch-ixp4xx/platform.h 2007-01-12 23:28:50.000000000 -0700
+@@ -89,6 +89,21 @@ struct ixp4xx_i2c_pins {
+
+ struct sys_timer;
+struct dl_block {
+ u32 type;
@@ -387,27 +349,28 @@ Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
+ struct dl_block block[0];
+ } u;
+};
++
struct npe_plat_data {
const char *name;
int data_size;
-@@ -103,6 +117,9 @@ struct mac_plat_info {
- unsigned char hwaddr[6]; /* Desired hardware address */
+@@ -108,6 +123,10 @@ struct mac_plat_info {
+
};
+struct npe_ucode_platform_data {
+ unsigned char *mtd_partition;
+};
-
- struct sys_timer;
-
-Index: linux-2.6.19/include/linux/ixp_npe.h
-===================================================================
---- linux-2.6.19.orig/include/linux/ixp_npe.h
-+++ linux-2.6.19/include/linux/ixp_npe.h
-@@ -71,6 +71,7 @@ static inline u32 npe_read_ecs_reg(struc
- }
++
+ /*
+ * Frequency of clock used for primary clocksource
+ */
+diff -Naupr a/include/linux/ixp_npe.h b/include/linux/ixp_npe.h
+--- a/include/linux/ixp_npe.h 2007-01-12 21:54:40.000000000 -0700
++++ b/include/linux/ixp_npe.h 2007-01-12 23:28:50.000000000 -0700
+@@ -99,6 +99,7 @@ extern void npe_reset(struct npe_info *n
extern struct device *get_npe_by_id(int id);
+ extern void return_npe_dev(struct device *dev);
+extern int store_npe_image(struct dl_image *image, struct device *dev);
/* NPE Messages */
diff --git a/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch
index 932fa9d412..cada1bd544 100644
--- a/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch
@@ -2,7 +2,7 @@ Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -137,6 +137,28 @@ static struct platform_device nslu2_uart
+@@ -137,6 +137,29 @@ static struct platform_device nslu2_uart
.resource = nslu2_uart_resources,
};
@@ -18,6 +18,7 @@ Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
+ .eth_id = 0,
+ .rxq_id = 27,
+ .txq_id = 24,
++ .rxdoneq_id = 4,
+};
+
+static struct platform_device mac0 = {
diff --git a/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch
index 7c3e589c12..9256324b10 100644
--- a/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch
+++ b/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch
@@ -2,7 +2,7 @@ Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -123,12 +123,35 @@ static struct platform_device nas100d_ua
+@@ -123,12 +123,36 @@ static struct platform_device nas100d_ua
.resource = nas100d_uart_resources,
};
@@ -18,6 +18,7 @@ Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
+ .eth_id = 0,
+ .rxq_id = 27,
+ .txq_id = 24,
++ .rxdoneq_id = 4,
+};
+
+static struct platform_device mac0 = {
diff --git a/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
index 6d2f52114c..5064f29d6e 100644
--- a/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
+++ b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
@@ -1,6 +1,6 @@
-diff -Nur linux-2.6.19/arch/arm/boot/compressed/head-xscale.S linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.19/arch/arm/boot/compressed/head-xscale.S 2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S 2006-12-19 13:17:38.000000000 +0100
+diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S
+--- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-03-03 22:42:42.000000000 +0100
@@ -46,6 +46,11 @@
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
@@ -13,9 +13,9 @@ diff -Nur linux-2.6.19/arch/arm/boot/compressed/head-xscale.S linux-2.6.19-owrt/
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
-diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.19-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
---- linux-2.6.19/arch/arm/mach-ixp4xx/coyote-setup.c 2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-12-19 13:17:38.000000000 +0100
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/coyote-setup.c 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2007-03-03 23:33:35.000000000 +0100
@@ -1,9 +1,10 @@
/*
* arch/arm/mach-ixp4xx/coyote-setup.c
@@ -28,71 +28,12 @@ diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.19-owrt/arc
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*/
-@@ -73,9 +74,57 @@
- .resource = &coyote_uart_resource,
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &mac0,
-+ &mac1
- };
-
- static void __init coyote_init(void)
-@@ -111,6 +160,19 @@
+@@ -111,6 +112,19 @@
MACHINE_END
#endif
+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001")
++MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
@@ -107,9 +48,9 @@ diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.19-owrt/arc
/*
* IXDPG425 is identical to Coyote except for which serial port
* is connected.
-diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
---- linux-2.6.19/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-12-19 13:18:18.000000000 +0100
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-03-03 22:42:42.000000000 +0100
@@ -0,0 +1,68 @@
+/*
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
@@ -179,9 +120,9 @@ diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19-owrt/
+}
+
+subsys_initcall(gateway7001_pci_init);
-diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig 2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-12-19 13:17:38.000000000 +0100
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-03-03 22:42:42.000000000 +0100
@@ -33,6 +33,14 @@
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -197,9 +138,9 @@ diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19-owrt/arch/arm/m
config ARCH_IXDP425
bool "IXDP425"
help
-diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/Makefile linux-2.6.19-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.19/arch/arm/mach-ixp4xx/Makefile 2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19-owrt/arch/arm/mach-ixp4xx/Makefile 2006-12-19 13:17:38.000000000 +0100
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-03-03 22:42:42.000000000 +0100
@@ -20,5 +20,6 @@
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
@@ -207,9 +148,9 @@ diff -Nur linux-2.6.19/arch/arm/mach-ixp4xx/Makefile linux-2.6.19-owrt/arch/arm/
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-diff -Nur linux-2.6.19/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.19/include/asm-arm/arch-ixp4xx/uncompress.h 2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-12-19 13:17:38.000000000 +0100
+diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-03-03 22:42:42.000000000 +0100
@@ -38,9 +38,9 @@
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
diff --git a/target/linux/ixp4xx-2.6/patches/210-gateway_7001_mac_setup.patch b/target/linux/ixp4xx-2.6/patches/210-gateway_7001_mac_setup.patch
new file mode 100644
index 0000000000..2cf3bd2aa7
--- /dev/null
+++ b/target/linux/ixp4xx-2.6/patches/210-gateway_7001_mac_setup.patch
@@ -0,0 +1,62 @@
+diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
+--- linux-2.6.19.2/arch/arm/mach-ixp4xx/coyote-setup.c 2007-03-03 23:34:46.000000000 +0100
++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2007-03-03 23:42:47.000000000 +0100
+@@ -74,9 +74,57 @@
+ .resource = &coyote_uart_resource,
+ };
+
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 1,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 2,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *coyote_devices[] __initdata = {
+ &coyote_flash,
+- &coyote_uart
++ &coyote_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init coyote_init(void)
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 05:21:26 +0000