ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN

This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73

11 files changed, 155 insertions, 3 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index ac97d037c1..ace012acc7 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -64,7 +64,8 @@ case "$FIRMWARE" in
 	whr-g300n | \
 	wl-351 | \
 	wli-tx4-ag300n | \
-	wr512-3gn)
+	wr512-3gn | \
+	wr6202)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
 
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 65c49e0ebb..174383405a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -23,7 +23,8 @@ ramips_setup_interfaces()
 	argus-atp52b | \
 	b2c | \
 	nw718 | \
-	w502u)
+	w502u | \
+	wr6202)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		;;
 
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index f6884c8477..121b471f4f 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -25,7 +25,8 @@ preinit_set_mac_address() {
 	hw550-3g |\
 	nbg-419n |\
 	omni-emb |\
-	w502u)
+	w502u    |\
+	wr6202)
 		mac=$(ramips_get_mac_binary factory 40)
 		ifconfig eth0 hw ether $mac 2>/dev/null
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index b3c54e82db..5204820fb9 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -128,6 +128,9 @@ ramips_board_name() {
 	*"WR512-3GN-like router")
 		name="wr512-3gn"
 		;;
+	*"AWB WR6202")
+		name="wr6202"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 494e774ef9..2751fdda29 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -29,6 +29,7 @@ platform_check_image() {
 	rt-g32-b1 | \
 	rt-n15 | \
 	w502u |\
+	wr6202 |\
 	v22rw-2x2 | \
 	wl341v3 | \
 	wli-tx4-ag300n | \
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index bec6ff0bec..600e8bf905 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -45,4 +45,5 @@ enum ramips_mach_type {
 	RAMIPS_MACH_WL341V3,		/* Sitecom WL-341 v3 */
 	RAMIPS_MACH_WL351,		/* Sitecom WL-351 v1 002 */
 	RAMIPS_MACH_WR512_3GN,		/* SH-WR512NU/WS-WR512N1-like 3GN*/
+	RAMIPS_MACH_WR6202,		/* Accton WR6202 */
 };
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 826a484fe9..550287e34f 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,11 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
+config RT305X_MACH_WR6202
+	bool "Accton WR6202"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_ALL0256N
 	bool "Allnet ALL0256N support"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 743493e80b..da1952c0ee 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o
 obj-$(CONFIG_RT305X_MACH_WR512_3GN)	+= mach-wr512-3gn.o
 obj-$(CONFIG_RT305X_MACH_WL341V3)	+= mach-wl341v3.o
 obj-$(CONFIG_RT305X_MACH_WL351)		+= mach-wl351.o
+obj-$(CONFIG_RT305X_MACH_WR6202)	+= mach-wr6202.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
new file mode 100644
index 0000000000..64ea20113c
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
@@ -0,0 +1,126 @@
+/*
+ *  AWB WR6202 board support
+ *
+ *  Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include<linux/init.h>
+#include<linux/platform_device.h>
+#include<linux/mtd/mtd.h>
+#include<linux/mtd/partitions.h>
+#include<linux/mtd/physmap.h>
+#include<linux/gpio.h>
+
+#include<asm/mach-ralink/machine.h>
+#include<asm/mach-ralink/dev-gpio-buttons.h>
+#include<asm/mach-ralink/dev-gpio-leds.h>
+#include<asm/mach-ralink/rt305x.h>
+#include<asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define WR6202_GPIO_BUTTON_RESET     10        /* active low */
+#define WR6202_GPIO_BUTTON_WPS        0        /* active low */
+
+#define WR6202_BUTTONS_POLL_INTERVAL 20
+
+#define WR6202_GPIO_USB_POWER	     11
+
+#define WR6202_GPIO_LED_3G	     13
+#define WR6202_GPIO_LED_WPS	     14
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wr6202_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0,
+		.size	= 0x030000,
+	}, {
+		.name	= "uboot-config",
+		.offset	= 0x030000,
+		.size	= 0x040000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x050000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "linux",
+		.offset	= 0x050000,
+		.size	= 0x100000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x150000,
+		.size	= 0x6B0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wr6202_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(wr6202_partitions),
+	.parts		= wr6202_partitions,
+#endif
+};
+
+static struct gpio_led wr6202_leds_gpio[] __initdata = {
+	{
+		.name           = "wr6202:blue:wps",
+		.gpio           = WR6202_GPIO_LED_WPS,
+		.active_low     = 1,
+	}, {
+		.name           = "wr6202:blue:3g",
+		.gpio           = WR6202_GPIO_LED_3G,
+		.active_low     = 1,
+	}
+};
+
+static struct gpio_button wr6202_gpio_buttons[] __initdata = {
+	{
+		.desc           = "reset",
+		.type           = EV_KEY,
+		.code           = KEY_RESTART,
+		.threshold      = 3,
+		.gpio           = WR6202_GPIO_BUTTON_RESET,
+		.active_low     = 1,
+	}, {
+		.desc           = "wps",
+		.type           = EV_KEY,
+		.code           = KEY_WPS_BUTTON,
+		.threshold      = 3,
+		.gpio           = WR6202_GPIO_BUTTON_WPS,
+		.active_low     = 1,
+	}
+};
+
+static void __init wr6202_init(void)
+{
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio),
+				wr6202_leds_gpio);
+	ramips_register_gpio_buttons(-1, WR6202_BUTTONS_POLL_INTERVAL,
+				ARRAY_SIZE(wr6202_gpio_buttons),
+				wr6202_gpio_buttons);
+
+	/* Power to the USB port is controlled by GPIO line */
+	gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER");
+	gpio_direction_output(WR6202_GPIO_USB_POWER, 0);
+	gpio_free(WR6202_GPIO_USB_POWER);
+
+	rt305x_register_flash(0, &wr6202_flash_data);
+	rt305x_register_ethernet();
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+	rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202",
+	     wr6202_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 745edefbae..76f14ca41b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -167,6 +167,16 @@ define Image/Build/Template/NW718
 	$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
 endef
 
+console_WR6202=ttyS1,115200
+mtdlayout_WR6202=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Template/WR6202
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_WR6202),mtdlayout_WR6202,1048576,7012352)
+endef
+
+define Image/Build/Profile/WR6202
+	$(call Image/Build/Template/WR6202,$(1),wr6202,WR6202)
+endef
+
 console_OMNIEMB=ttyS1,57600
 mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
 define Image/Build/Template/OMNIEMB
@@ -328,6 +338,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WR5123GN,$(1))
 	$(call Image/Build/Profile/WL341V3,$(1))
 	$(call Image/Build/Profile/WL351,$(1))
+	$(call Image/Build/Profile/WR6202,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index e9ef379c07..0aa7670a8b 100644
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -112,6 +112,7 @@ CONFIG_RT305X_MACH_WHR_G300N=y
 CONFIG_RT305X_MACH_WL341V3=y
 CONFIG_RT305X_MACH_WL351=y
 CONFIG_RT305X_MACH_WR512_3GN=y
+CONFIG_RT305X_MACH_WR6202=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RT288X=y