[PATCH 1/1] geos: backport driver from linux-next to 3.2 and 3.3

The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30022 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 376 insertions, 0 deletions

diff --git a/target/linux/x86/patches-3.2/002-geos_platform.patch b/target/linux/x86/patches-3.2/002-geos_platform.patch
new file mode 100644
index 0000000000..cdb8dc2f14
--- /dev/null
+++ b/target/linux/x86/patches-3.2/002-geos_platform.patch
@@ -0,0 +1,188 @@
+From 31bc84d45320dad2392384381ad4d818ab21087a Mon Sep 17 00:00:00 2001
+From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
+Date: Wed, 18 Jan 2012 11:15:33 -0700
+Subject: [PATCH 1/1] geos: Platform driver for Geos and Geos2 single-board
+ computers.
+
+Trivial platform driver for Traverse Technologies Geos and Geos2
+single-board computers. Uses SMBIOS to identify platform.
+Based on progressive revisions of the leds-net5501 driver that
+was rewritten by Ed Wildgoose as a platform driver.
+
+Supports GPIO-based LEDs (3) and 1 polled button which is
+typically used for a soft reset.
+
+Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
+Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
+Acked-by: Andres Salomon <dilinger@queued.net>
+Cc: Richard Purdie <rpurdie@rpsys.net>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+---
+ arch/x86/Kconfig                 |    7 ++
+ arch/x86/platform/geode/Makefile |    1 +
+ arch/x86/platform/geode/geos.c   |  128 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 136 insertions(+), 0 deletions(-)
+ create mode 100644 arch/x86/platform/geode/geos.c
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 07c3f15..4ee921b 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -2168,6 +2168,13 @@ config ALIX
+ 
+ 	  Note: You have to set alix.force=1 for boards with Award BIOS.
+ 
++config GEOS
++	bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
++	select GPIOLIB
++	depends on DMI
++	---help---
++	  This option enables system support for the Traverse Technologies GEOS.
++
+ endif # X86_32
+ 
+ config AMD_NB
+diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
+index 07c9cd0..d8ba564 100644
+--- a/arch/x86/platform/geode/Makefile
++++ b/arch/x86/platform/geode/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_ALIX)		+= alix.o
++obj-$(CONFIG_GEOS)		+= geos.o
+diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
+new file mode 100644
+index 0000000..c2e6d53
+--- /dev/null
++++ b/arch/x86/platform/geode/geos.c
+@@ -0,0 +1,128 @@
++/*
++ * System Specific setup for Traverse Technologies GEOS.
++ * At the moment this means setup of GPIO control of LEDs.
++ *
++ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
++ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
++ *                and Philip Prindeville <philipp@redfish-solutions.com>
++ *
++ * TODO: There are large similarities with leds-net5501.c
++ * by Alessandro Zummo <a.zummo@towertech.it>
++ * In the future leds-net5501.c should be migrated over to platform
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/string.h>
++#include <linux/module.h>
++#include <linux/leds.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++#include <linux/dmi.h>
++
++#include <asm/geode.h>
++
++static struct gpio_keys_button geos_gpio_buttons[] = {
++	{
++		.code = KEY_RESTART,
++		.gpio = 3,
++		.active_low = 1,
++		.desc = "Reset button",
++		.type = EV_KEY,
++		.wakeup = 0,
++		.debounce_interval = 100,
++		.can_disable = 0,
++	}
++};
++static struct gpio_keys_platform_data geos_buttons_data = {
++	.buttons = geos_gpio_buttons,
++	.nbuttons = ARRAY_SIZE(geos_gpio_buttons),
++	.poll_interval = 20,
++};
++
++static struct platform_device geos_buttons_dev = {
++	.name = "gpio-keys-polled",
++	.id = 1,
++	.dev = {
++		.platform_data = &geos_buttons_data,
++	}
++};
++
++static struct gpio_led geos_leds[] = {
++	{
++		.name = "geos:1",
++		.gpio = 6,
++		.default_trigger = "default-on",
++		.active_low = 1,
++	},
++	{
++		.name = "geos:2",
++		.gpio = 25,
++		.default_trigger = "default-off",
++		.active_low = 1,
++	},
++	{
++		.name = "geos:3",
++		.gpio = 27,
++		.default_trigger = "default-off",
++		.active_low = 1,
++	},
++};
++
++static struct gpio_led_platform_data geos_leds_data = {
++	.num_leds = ARRAY_SIZE(geos_leds),
++	.leds = geos_leds,
++};
++
++static struct platform_device geos_leds_dev = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev.platform_data = &geos_leds_data,
++};
++
++static struct __initdata platform_device *geos_devs[] = {
++	&geos_buttons_dev,
++	&geos_leds_dev,
++};
++
++static void __init register_geos(void)
++{
++	/* Setup LED control through leds-gpio driver */
++	platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
++}
++
++static int __init geos_init(void)
++{
++	const char *vendor, *product;
++
++	if (!is_geode())
++		return 0;
++
++	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
++	if (!vendor || strcmp(vendor, "Traverse Technologies"))
++		return 0;
++
++	product = dmi_get_system_info(DMI_PRODUCT_NAME);
++	if (!product || strcmp(product, "Geos"))
++		return 0;
++
++	printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
++	       KBUILD_MODNAME, vendor, product);
++
++	register_geos();
++
++	return 0;
++}
++
++module_init(geos_init);
++
++MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
++MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
++MODULE_LICENSE("GPL");
+-- 
+1.7.7.4
+
diff --git a/target/linux/x86/patches-3.3/002-geos_platform.patch b/target/linux/x86/patches-3.3/002-geos_platform.patch
new file mode 100644
index 0000000000..cdb8dc2f14
--- /dev/null
+++ b/target/linux/x86/patches-3.3/002-geos_platform.patch
@@ -0,0 +1,188 @@
+From 31bc84d45320dad2392384381ad4d818ab21087a Mon Sep 17 00:00:00 2001
+From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
+Date: Wed, 18 Jan 2012 11:15:33 -0700
+Subject: [PATCH 1/1] geos: Platform driver for Geos and Geos2 single-board
+ computers.
+
+Trivial platform driver for Traverse Technologies Geos and Geos2
+single-board computers. Uses SMBIOS to identify platform.
+Based on progressive revisions of the leds-net5501 driver that
+was rewritten by Ed Wildgoose as a platform driver.
+
+Supports GPIO-based LEDs (3) and 1 polled button which is
+typically used for a soft reset.
+
+Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
+Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
+Acked-by: Andres Salomon <dilinger@queued.net>
+Cc: Richard Purdie <rpurdie@rpsys.net>
+Cc: Andrew Morton <akpm@linux-foundation.org>
+---
+ arch/x86/Kconfig                 |    7 ++
+ arch/x86/platform/geode/Makefile |    1 +
+ arch/x86/platform/geode/geos.c   |  128 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 136 insertions(+), 0 deletions(-)
+ create mode 100644 arch/x86/platform/geode/geos.c
+
+diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
+index 07c3f15..4ee921b 100644
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -2168,6 +2168,13 @@ config ALIX
+ 
+ 	  Note: You have to set alix.force=1 for boards with Award BIOS.
+ 
++config GEOS
++	bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
++	select GPIOLIB
++	depends on DMI
++	---help---
++	  This option enables system support for the Traverse Technologies GEOS.
++
+ endif # X86_32
+ 
+ config AMD_NB
+diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
+index 07c9cd0..d8ba564 100644
+--- a/arch/x86/platform/geode/Makefile
++++ b/arch/x86/platform/geode/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_ALIX)		+= alix.o
++obj-$(CONFIG_GEOS)		+= geos.o
+diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
+new file mode 100644
+index 0000000..c2e6d53
+--- /dev/null
++++ b/arch/x86/platform/geode/geos.c
+@@ -0,0 +1,128 @@
++/*
++ * System Specific setup for Traverse Technologies GEOS.
++ * At the moment this means setup of GPIO control of LEDs.
++ *
++ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
++ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
++ *                and Philip Prindeville <philipp@redfish-solutions.com>
++ *
++ * TODO: There are large similarities with leds-net5501.c
++ * by Alessandro Zummo <a.zummo@towertech.it>
++ * In the future leds-net5501.c should be migrated over to platform
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/string.h>
++#include <linux/module.h>
++#include <linux/leds.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++#include <linux/dmi.h>
++
++#include <asm/geode.h>
++
++static struct gpio_keys_button geos_gpio_buttons[] = {
++	{
++		.code = KEY_RESTART,
++		.gpio = 3,
++		.active_low = 1,
++		.desc = "Reset button",
++		.type = EV_KEY,
++		.wakeup = 0,
++		.debounce_interval = 100,
++		.can_disable = 0,
++	}
++};
++static struct gpio_keys_platform_data geos_buttons_data = {
++	.buttons = geos_gpio_buttons,
++	.nbuttons = ARRAY_SIZE(geos_gpio_buttons),
++	.poll_interval = 20,
++};
++
++static struct platform_device geos_buttons_dev = {
++	.name = "gpio-keys-polled",
++	.id = 1,
++	.dev = {
++		.platform_data = &geos_buttons_data,
++	}
++};
++
++static struct gpio_led geos_leds[] = {
++	{
++		.name = "geos:1",
++		.gpio = 6,
++		.default_trigger = "default-on",
++		.active_low = 1,
++	},
++	{
++		.name = "geos:2",
++		.gpio = 25,
++		.default_trigger = "default-off",
++		.active_low = 1,
++	},
++	{
++		.name = "geos:3",
++		.gpio = 27,
++		.default_trigger = "default-off",
++		.active_low = 1,
++	},
++};
++
++static struct gpio_led_platform_data geos_leds_data = {
++	.num_leds = ARRAY_SIZE(geos_leds),
++	.leds = geos_leds,
++};
++
++static struct platform_device geos_leds_dev = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev.platform_data = &geos_leds_data,
++};
++
++static struct __initdata platform_device *geos_devs[] = {
++	&geos_buttons_dev,
++	&geos_leds_dev,
++};
++
++static void __init register_geos(void)
++{
++	/* Setup LED control through leds-gpio driver */
++	platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
++}
++
++static int __init geos_init(void)
++{
++	const char *vendor, *product;
++
++	if (!is_geode())
++		return 0;
++
++	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
++	if (!vendor || strcmp(vendor, "Traverse Technologies"))
++		return 0;
++
++	product = dmi_get_system_info(DMI_PRODUCT_NAME);
++	if (!product || strcmp(product, "Geos"))
++		return 0;
++
++	printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
++	       KBUILD_MODNAME, vendor, product);
++
++	register_geos();
++
++	return 0;
++}
++
++module_init(geos_init);
++
++MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
++MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
++MODULE_LICENSE("GPL");
+-- 
+1.7.7.4
+