summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-05-16 00:20:17 +0000
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>2010-05-16 00:20:17 +0000
commit388a290343da898bb3770a39a74d695c05178b1c (patch)
treead7ff33b39148fe64db001ba35c7573d9e1352c7 /target
parent684873897636aee59fae0e68e6322959870a978c (diff)
get rid of CRLF encoding in various files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21462 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h98
-rw-r--r--target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h40
-rw-r--r--target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h60
-rw-r--r--target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile84
4 files changed, 141 insertions, 141 deletions
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
index 4235086d5e..9d5c9bf951 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
@@ -1,49 +1,49 @@
-#ifndef _LINUX_ETRAXI2C_H
-#define _LINUX_ETRAXI2C_H
-
-/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
-
-#define ETRAXI2C_IOCTYPE 44
-
-/* supported ioctl _IOC_NR's */
-
-/* in write operations, the argument contains both i2c
- * slave, register and value.
- */
-
-#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
-#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
-
-#define I2C_ARGSLAVE(arg) ((arg) >> 16)
-#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
-#define I2C_ARGVALUE(arg) ((arg) & 0xff)
-
-#define I2C_WRITEREG 0x1 /* write to an I2C register */
-#define I2C_READREG 0x2 /* read from an I2C register */
-
-/*
-EXAMPLE usage:
-
- i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
- ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
-
- i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
- val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
-
-*/
-
-/* Extended part */
-#define I2C_READ 0x4 /* reads from I2C device */
-#define I2C_WRITE 0x3 /* writes to I2C device */
-#define I2C_WRITEREAD 0x5 /* writes to I2C device where to start reading */
-
-typedef struct _I2C_DATA
-{
- unsigned char slave; /* I2C address (8-bit representation) of slave device */
- unsigned char wbuf[256]; /* Write buffer (length = 256 bytes) */
- unsigned int wlen; /* Number of bytes to write from wbuf[] */
- unsigned char rbuf[256]; /* Read buffer (length = 256 bytes) */
- unsigned int rlen; /* Number of bytes to read into rbuf[] */
-} I2C_DATA;
-
-#endif
+#ifndef _LINUX_ETRAXI2C_H
+#define _LINUX_ETRAXI2C_H
+
+/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
+
+#define ETRAXI2C_IOCTYPE 44
+
+/* supported ioctl _IOC_NR's */
+
+/* in write operations, the argument contains both i2c
+ * slave, register and value.
+ */
+
+#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
+#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
+
+#define I2C_ARGSLAVE(arg) ((arg) >> 16)
+#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
+#define I2C_ARGVALUE(arg) ((arg) & 0xff)
+
+#define I2C_WRITEREG 0x1 /* write to an I2C register */
+#define I2C_READREG 0x2 /* read from an I2C register */
+
+/*
+EXAMPLE usage:
+
+ i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+ ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+
+ i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+ val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+*/
+
+/* Extended part */
+#define I2C_READ 0x4 /* reads from I2C device */
+#define I2C_WRITE 0x3 /* writes to I2C device */
+#define I2C_WRITEREAD 0x5 /* writes to I2C device where to start reading */
+
+typedef struct _I2C_DATA
+{
+ unsigned char slave; /* I2C address (8-bit representation) of slave device */
+ unsigned char wbuf[256]; /* Write buffer (length = 256 bytes) */
+ unsigned int wlen; /* Number of bytes to write from wbuf[] */
+ unsigned char rbuf[256]; /* Read buffer (length = 256 bytes) */
+ unsigned int rlen; /* Number of bytes to read into rbuf[] */
+} I2C_DATA;
+
+#endif
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
index 7de4ad62c0..ddd99b0e5b 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
@@ -1,20 +1,20 @@
-#ifndef _I2C_ERRNO_H
-#define _I2C_ERRNO_H
-
-#define EI2CNOERRORS 0 /* All fine */
-#define EI2CBUSNFREE 1 /* I2C bus not free */
-#define EI2CWADDRESS 2 /* Address write failed */
-#define EI2CRADDRESS 3 /* Address read failed */
-#define EI2CSENDDATA 4 /* Sending data failed */
-#define EI2CRECVDATA 5 /* Receiving data failed */
-#define EI2CSTRTCOND 6 /* Start condition failed */
-#define EI2CRSTACOND 7 /* Repeated start condition failed */
-#define EI2CSTOPCOND 8 /* Stop condition failed */
-#define EI2CNOSNDBYT 9 /* Number of send bytes is 0, while there's a send buffer defined */
-#define EI2CNOSNDBUF 10 /* No send buffer defined, while number of send bytes is not 0 */
-#define EI2CNORCVBYT 11 /* Number of receive bytes is 0, while there's a receive buffer defined */
-#define EI2CNORCVBUF 12 /* No receive buffer defined, while number of receive bytes is not 0 */
-#define EI2CNOACKNLD 13 /* No acknowledge received from slave */
-#define EI2CNOMNUMBR 14 /* No MAJOR number received from kernel while registering the device */
-
-#endif /* _I2C_ERRNO_H */
+#ifndef _I2C_ERRNO_H
+#define _I2C_ERRNO_H
+
+#define EI2CNOERRORS 0 /* All fine */
+#define EI2CBUSNFREE 1 /* I2C bus not free */
+#define EI2CWADDRESS 2 /* Address write failed */
+#define EI2CRADDRESS 3 /* Address read failed */
+#define EI2CSENDDATA 4 /* Sending data failed */
+#define EI2CRECVDATA 5 /* Receiving data failed */
+#define EI2CSTRTCOND 6 /* Start condition failed */
+#define EI2CRSTACOND 7 /* Repeated start condition failed */
+#define EI2CSTOPCOND 8 /* Stop condition failed */
+#define EI2CNOSNDBYT 9 /* Number of send bytes is 0, while there's a send buffer defined */
+#define EI2CNOSNDBUF 10 /* No send buffer defined, while number of send bytes is not 0 */
+#define EI2CNORCVBYT 11 /* Number of receive bytes is 0, while there's a receive buffer defined */
+#define EI2CNORCVBUF 12 /* No receive buffer defined, while number of receive bytes is not 0 */
+#define EI2CNOACKNLD 13 /* No acknowledge received from slave */
+#define EI2CNOMNUMBR 14 /* No MAJOR number received from kernel while registering the device */
+
+#endif /* _I2C_ERRNO_H */
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
index e4d4d2c7fe..cac2d4689b 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
@@ -1,30 +1,30 @@
-#ifndef _I2C_H
-#define _I2C_H
-
-int i2c_init(void);
-
-/* High level I2C actions */
-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-/* Low level I2C */
-int i2c_start(void);
-int i2c_stop(void);
-int i2c_outbyte(unsigned char x);
-unsigned char i2c_inbyte(void);
-int i2c_getack(void);
-void i2c_sendack(void);
-void i2c_sendnack(void);
-
-/**GVC**/
-/* New low level I2C functions */
-int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );
-int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );
-int i2c_writeread( unsigned char slave
- , unsigned char* wbuf
- , unsigned char wlen
- , unsigned char* rbuf
- , unsigned char rlen
- );
-/**END GVC**/
-#endif /* _I2C_H */
+#ifndef _I2C_H
+#define _I2C_H
+
+int i2c_init(void);
+
+/* High level I2C actions */
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+int i2c_start(void);
+int i2c_stop(void);
+int i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
+void i2c_sendnack(void);
+
+/**GVC**/
+/* New low level I2C functions */
+int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );
+int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );
+int i2c_writeread( unsigned char slave
+ , unsigned char* wbuf
+ , unsigned char wlen
+ , unsigned char* rbuf
+ , unsigned char rlen
+ );
+/**END GVC**/
+#endif /* _I2C_H */
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
index 9b41329852..90f36e63c4 100644
--- a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
+++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
@@ -1,42 +1,42 @@
-#
-# linux/arch/mips/boot/compressed/Makefile
-#
-# create a compressed zImage from the original vmlinux
-#
-
-targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o
-
-OBJS := $(obj)/head.o $(obj)/misc.o
-
-LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic
-OBJCOPY_ARGS := -O elf32-tradlittlemips
-
-ENTRY := $(obj)/../tools/entry
-FILESIZE := $(obj)/../tools/filesize
-
-drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags = $(addprefix --remove-section=,$(drop-sections))
-
-
-$(obj)/vmlinux.bin.gz: vmlinux
- rm -f $(obj)/vmlinux.bin.gz
- $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin
- gzip -v9f $(obj)/vmlinux.bin
-
-$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux
- $(CC) $(KBUILD_AFLAGS) \
- -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \
- -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \
- -DLOADADDR=$(loadaddr) \
- -c -o $(obj)/head.o $<
-
-$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o
- $(OBJCOPY) \
- --add-section=.image=$(obj)/vmlinux.bin.gz \
- --set-section-flags=.image=contents,alloc,load,readonly,data \
- $(obj)/dummy.o $(obj)/piggy.o
- $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o
- $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
-
-zImage: $(obj)/vmlinuz
- $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage
+#
+# linux/arch/mips/boot/compressed/Makefile
+#
+# create a compressed zImage from the original vmlinux
+#
+
+targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o
+
+OBJS := $(obj)/head.o $(obj)/misc.o
+
+LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic
+OBJCOPY_ARGS := -O elf32-tradlittlemips
+
+ENTRY := $(obj)/../tools/entry
+FILESIZE := $(obj)/../tools/filesize
+
+drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags = $(addprefix --remove-section=,$(drop-sections))
+
+
+$(obj)/vmlinux.bin.gz: vmlinux
+ rm -f $(obj)/vmlinux.bin.gz
+ $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin
+ gzip -v9f $(obj)/vmlinux.bin
+
+$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux
+ $(CC) $(KBUILD_AFLAGS) \
+ -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \
+ -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \
+ -DLOADADDR=$(loadaddr) \
+ -c -o $(obj)/head.o $<
+
+$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o
+ $(OBJCOPY) \
+ --add-section=.image=$(obj)/vmlinux.bin.gz \
+ --set-section-flags=.image=contents,alloc,load,readonly,data \
+ $(obj)/dummy.o $(obj)/piggy.o
+ $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o
+ $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
+
+zImage: $(obj)/vmlinuz
+ $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage