ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)

The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 118 insertions, 0 deletions

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 53d42a04eb..286323fe12 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -21,6 +21,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_DIR_300_REVB,	/* D-Link DIR-300 rev B */
 
 	/* RT3052 based machines */
+	RAMIPS_MACH_PWH2004,		/* Prolink 2004H / Abocom 5205 */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */
 	RAMIPS_MACH_V22RW_2X2,		/* Ralink AP-RT3052-V22RW-2X2 */
 	RAMIPS_MACH_WHR_G300N,		/* Buffalo WHR-G300N */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index e43261ed39..f50328b109 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -32,6 +32,12 @@ config RT305X_MACH_FONERA20N
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_PWH2004
+	bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
+	default y
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 endmenu
 
 endif
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 28cb88c630..75f65700bc 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_RT305X_MACH_V22RW_2X2)	+= mach-v22rw-2x2.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o
 obj-$(CONFIG_RT305X_MACH_FONERA20N)	+= mach-fonera20n.o
+obj-$(CONFIG_RT305X_MACH_PWH2004)	+= mach-pwh2004.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c
new file mode 100644
index 0000000000..090a797683
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c
@@ -0,0 +1,103 @@
+/*
+ *  Prolink PWH2004 support (or Abocom WR5205)
+ *
+ *  Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define PWH2004_GPIO_BUTTON_WPS		12
+#define PWH2004_GPIO_LED_POWER		9
+#define PWH2004_GPIO_LED_WIFI		14
+#define PWH2004_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition pwh2004_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "config",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x7b0000,
+	}, {
+		.name	= "openwrt",
+		.offset	= 0x050000,
+		.size	= 0x7b0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data pwh2004_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(pwh2004_partitions),
+	.parts		= pwh2004_partitions,
+#endif
+};
+
+static struct gpio_led pwh2004_leds_gpio[] __initdata = {
+	{
+		.name		= "pwh2004:red:wifi",
+		.gpio		= PWH2004_GPIO_LED_WIFI,
+		.active_low	= 1,
+	}, {
+		.name		= "pwh2004:green:power",
+		.gpio		= PWH2004_GPIO_LED_POWER,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button pwh2004_gpio_buttons[] __initdata = {
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= PWH2004_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init pwh2004_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+	rt305x_register_flash(0, &pwh2004_flash_data);
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio),
+				  pwh2004_leds_gpio);
+	ramips_register_gpio_buttons(-1, PWH2004_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(pwh2004_gpio_buttons),
+				     pwh2004_gpio_buttons);
+	rt305x_register_ethernet();
+	rt305x_register_wifi();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004",
+	     pwh2004_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 03be7647ce..acd328317c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -88,6 +88,10 @@ define Image/Build/Profile/FONERA20N
 	$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
 endef
 
+define Image/Build/Template/PWH2004
+	$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
+endef
+
 define Image/Build/Profile/V22RW2X2
 	$(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
 endef
@@ -114,6 +118,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR300B1,$(1))
 	$(call Image/Build/Profile/FONERA20N,$(1))
 	$(call Image/Build/Profile/V22RW2X2,$(1))
+	$(call Image/Build/Profile/PWH2004,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))
 	$(call Image/Build/Profile/WCR150GN,$(1))
 endef
diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32
index a3575651e2..1d29c914f7 100644
--- a/target/linux/ramips/rt305x/config-2.6.32
+++ b/target/linux/ramips/rt305x/config-2.6.32
@@ -119,6 +119,7 @@ CONFIG_RALINK_RT305X=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
 CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_PWH2004=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34
index 8234717bb2..91b7e56426 100644
--- a/target/linux/ramips/rt305x/config-2.6.34
+++ b/target/linux/ramips/rt305x/config-2.6.34
@@ -129,6 +129,7 @@ CONFIG_RALINK_RT305X=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
 CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
+CONFIG_RT305X_MACH_PWH2004=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y