summaryrefslogtreecommitdiff
path: root/target/linux
diff options
context:
space:
mode:
authorlars <lars@3c298f89-4303-0410-b956-a3cf2f4a3e73>2008-09-27 17:48:41 +0000
committerlars <lars@3c298f89-4303-0410-b956-a3cf2f4a3e73>2008-09-27 17:48:41 +0000
commit808ddb3dcd315e8da0a3b491592c77a086ab8389 (patch)
tree14f3a2fb6917a9227b9774fbc441377855080aaa /target/linux
parent133e40341049790927561e3dd1cda24019495920 (diff)
Remove 2.6.23 config, files and patches from olpc target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12742 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/olpc/config-2.6.230
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S1080
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig2183
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c354
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c100
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c785
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S39
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S122
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c320
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c478
-rw-r--r--target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c298
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c554
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h49
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h11
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c365
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c495
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h242
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c272
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c824
-rw-r--r--target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h75
-rw-r--r--target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h16
-rw-r--r--target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h116
-rw-r--r--target/linux/olpc/files-2.6.23/include/asm-i386/prom.h108
-rw-r--r--target/linux/olpc/files-2.6.23/include/linux/battery.h101
-rw-r--r--target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c110
-rw-r--r--target/linux/olpc/patches-2.6.23/100-olpc.patch5880
-rw-r--r--target/linux/olpc/patches-2.6.23/110-olpc_sound.patch414
-rw-r--r--target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch12
-rw-r--r--target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch235
29 files changed, 0 insertions, 15638 deletions
diff --git a/target/linux/olpc/config-2.6.23 b/target/linux/olpc/config-2.6.23
deleted file mode 100644
index e69de29bb2..0000000000
--- a/target/linux/olpc/config-2.6.23
+++ /dev/null
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S b/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S
deleted file mode 100644
index 4cf6e231c5..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S
+++ /dev/null
@@ -1,1080 +0,0 @@
-/*
- * setup.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * setup.s is responsible for getting the system data from the BIOS,
- * and putting them into the appropriate places in system memory.
- * both setup.s and system has been loaded by the bootblock.
- *
- * This code asks the bios for memory/disk/other parameters, and
- * puts them in a "safe" place: 0x90000-0x901FF, ie where the
- * boot-block used to be. It is then up to the protected mode
- * system to read them from there before the area is overwritten
- * for buffer-blocks.
- *
- * Move PS/2 aux init code to psaux.c
- * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
- *
- * some changes and additional features by Christoph Niemann,
- * March 1993/June 1994 (Christoph.Niemann@linux.org)
- *
- * add APM BIOS checking by Stephen Rothwell, May 1994
- * (sfr@canb.auug.org.au)
- *
- * High load stuff, initrd support and position independency
- * by Hans Lermen & Werner Almesberger, February 1996
- * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
- *
- * Video handling moved to video.S by Martin Mares, March 1996
- * <mj@k332.feld.cvut.cz>
- *
- * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
- * parsons) to avoid loadlin confusion, July 1997
- *
- * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
- * <stiker@northlink.com>
- *
- * Fix to work around buggy BIOSes which don't use carry bit correctly
- * and/or report extended memory in CX/DX for e801h memory size detection
- * call. As a result the kernel got wrong figures. The int15/e801h docs
- * from Ralf Brown interrupt list seem to indicate AX/BX should be used
- * anyway. So to avoid breaking many machines (presumably there was a reason
- * to orginally use CX/DX instead of AX/BX), we do a kludge to see
- * if CX/DX have been changed in the e801 call and if so use AX/BX .
- * Michael Miller, April 2001 <michaelm@mjmm.org>
- *
- * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
- * by Robert Schwebel, December 2001 <robert@schwebel.de>
- */
-
-#include <asm/segment.h>
-#include <linux/utsrelease.h>
-#include <linux/compile.h>
-#include <asm/boot.h>
-#include <asm/e820.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-/* Signature words to ensure LILO loaded us right */
-#define SIG1 0xAA55
-#define SIG2 0x5A5A
-
-INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
-SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
-SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
- # ... and the former contents of CS
-
-DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
-
-.code16
-.globl begtext, begdata, begbss, endtext, enddata, endbss
-
-.text
-begtext:
-.data
-begdata:
-.bss
-begbss:
-.text
-
-start:
- jmp trampoline
-
-# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-
- .ascii "HdrS" # header signature
- .word 0x0206 # header version number (>= 0x0105)
- # or else old loadlin-1.5 will fail)
-realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-start_sys_seg: .word SYSSEG
- .word kernel_version # pointing to kernel version string
- # above section of header is compatible
- # with loadlin-1.5 (header v1.5). Don't
- # change it.
-
-type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
- # Bootlin, SYSLX, bootsect...)
- # See Documentation/i386/boot.txt for
- # assigned ids
-
-# flags, unused bits must be zero (RFU) bit within loadflags
-loadflags:
-LOADED_HIGH = 1 # If set, the kernel is loaded high
-CAN_USE_HEAP = 0x80 # If set, the loader also has set
- # heap_end_ptr to tell how much
- # space behind setup.S can be used for
- # heap purposes.
- # Only the loader knows what is free
-#ifndef __BIG_KERNEL__
- .byte 0
-#else
- .byte LOADED_HIGH
-#endif
-
-setup_move_size: .word 0x8000 # size to move, when setup is not
- # loaded at 0x90000. We will move setup
- # to 0x90000 then just before jumping
- # into the kernel. However, only the
- # loader knows how much data behind
- # us also needs to be loaded.
-
-code32_start: # here loaders can put a different
- # start address for 32-bit code.
-#ifndef __BIG_KERNEL__
- .long 0x1000 # 0x1000 = default for zImage
-#else
- .long 0x100000 # 0x100000 = default for big kernel
-#endif
-
-ramdisk_image: .long 0 # address of loaded ramdisk image
- # Here the loader puts the 32-bit
- # address where it loaded the image.
- # This only will be read by the kernel.
-
-ramdisk_size: .long 0 # its size in bytes
-
-bootsect_kludge:
- .long 0 # obsolete
-
-heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
- # space from here (exclusive) down to
- # end of setup code can be used by setup
- # for local heap purposes.
-
-pad1: .word 0
-cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
- # If nonzero, a 32-bit pointer
- # to the kernel command line.
- # The command line should be
- # located between the start of
- # setup and the end of low
- # memory (0xa0000), or it may
- # get overwritten before it
- # gets read. If this field is
- # used, there is no longer
- # anything magical about the
- # 0x90000 segment; the setup
- # can be located anywhere in
- # low memory 0x10000 or higher.
-
-ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
- # (Header version 0x0203 or later)
- # The highest safe address for
- # the contents of an initrd
-
-kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
- #required for protected mode
- #kernel
-#ifdef CONFIG_RELOCATABLE
-relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
-pad2: .byte 0
-pad3: .word 0
-
-cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
- #added with boot protocol
- #version 2.06
-
-trampoline: call start_of_setup
- .align 16
- # The offset at this point is 0x240
- .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-# End of setup header #####################################################
-
-start_of_setup:
-# Bootlin depends on this being done early
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
-
-#ifdef SAFE_RESET_DISK_CONTROLLER
-# Reset the disk controller.
- movw $0x0000, %ax
- movb $0x80, %dl
- int $0x13
-#endif
-
-# Set %ds = %cs, we know that SETUPSEG = %cs at this point
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-# Check signature at end of setup
- cmpw $SIG1, setup_sig1
- jne bad_sig
-
- cmpw $SIG2, setup_sig2
- jne bad_sig
-
- jmp good_sig1
-
-# Routine to print asciiz string at ds:si
-prtstr:
- lodsb
- andb %al, %al
- jz fin
-
- call prtchr
- jmp prtstr
-
-fin: ret
-
-# Space printing
-prtsp2: call prtspc # Print double space
-prtspc: movb $0x20, %al # Print single space (note: fall-thru)
-
-# Part of above routine, this one just prints ascii al
-prtchr: pushw %ax
- pushw %cx
- movw $7,%bx
- movw $0x01, %cx
- movb $0x0e, %ah
- int $0x10
- popw %cx
- popw %ax
- ret
-
-beep: movb $0x07, %al
- jmp prtchr
-
-no_sig_mess: .string "No setup signature found ..."
-
-good_sig1:
- jmp good_sig
-
-# We now have to find the rest of the setup code/data
-bad_sig:
- movw %cs, %ax # SETUPSEG
- subw $DELTA_INITSEG, %ax # INITSEG
- movw %ax, %ds
- xorb %bh, %bh
- movb (497), %bl # get setup sect from bootsect
- subw $4, %bx # LILO loads 4 sectors of setup
- shlw $8, %bx # convert to words (1sect=2^8 words)
- movw %bx, %cx
- shrw $3, %bx # convert to segment
- addw $SYSSEG, %bx
- movw %bx, %cs:start_sys_seg
-# Move rest of setup code/data to here
- movw $2048, %di # four sectors loaded by LILO
- subw %si, %si
- pushw %cs
- popw %es
- movw $SYSSEG, %ax
- movw %ax, %ds
- rep
- movsw
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
- cmpw $SIG1, setup_sig1
- jne no_sig
-
- cmpw $SIG2, setup_sig2
- jne no_sig
-
- jmp good_sig
-
-no_sig:
- lea no_sig_mess, %si
- call prtstr
-
-no_sig_loop:
- hlt
- jmp no_sig_loop
-
-good_sig:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
-# Check if an old loader tries to load a big-kernel
- testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
- jz loader_ok # No, no danger for old loaders.
-
- cmpb $0, %cs:type_of_loader # Do we have a loader that
- # can deal with us?
- jnz loader_ok # Yes, continue.
-
- pushw %cs # No, we have an old loader,
- popw %ds # die.
- lea loader_panic_mess, %si
- call prtstr
-
- jmp no_sig_loop
-
-loader_panic_mess: .string "Wrong loader, giving up..."
-
-# check minimum cpuid
-# we do this here because it is the last place we can actually
-# show a user visible error message. Later the video modus
-# might be already messed up.
-loader_ok:
- call verify_cpu
- testl %eax,%eax
- jz cpu_ok
- movw %cs,%ax # aka SETUPSEG
- movw %ax,%ds
- lea cpu_panic_mess,%si
- call prtstr
-1: jmp 1b
-
-cpu_panic_mess:
- .asciz "PANIC: CPU too old for this kernel."
-
-#include "../kernel/verify_cpu.S"
-
-cpu_ok:
-# Get memory size (extended mem, kB)
-
- xorl %eax, %eax
- movl %eax, (0x1e0)
-#ifndef STANDARD_MEMORY_BIOS_CALL
- movb %al, (E820NR)
-# Try three different memory detection schemes. First, try
-# e820h, which lets us assemble a memory map, then try e801h,
-# which returns a 32-bit memory size, and finally 88h, which
-# returns 0-64m
-
-# method E820H:
-# the memory map from hell. e820h returns memory classified into
-# a whole bunch of different types, and allows memory holes and
-# everything. We scan through this memory map and build a list
-# of the first 32 memory areas, which we return at [E820MAP].
-# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-
-#define SMAP 0x534d4150
-
-meme820:
- xorl %ebx, %ebx # continuation counter
- movw $E820MAP, %di # point into the whitelist
- # so we can have the bios
- # directly write into it.
-
-jmpe820:
- movl $0x0000e820, %eax # e820, upper word zeroed
- movl $SMAP, %edx # ascii 'SMAP'
- movl $20, %ecx # size of the e820rec
- pushw %ds # data record.
- popw %es
- int $0x15 # make the call
- jc bail820 # fall to e801 if it fails
-
- cmpl $SMAP, %eax # check the return is `SMAP'
- jne bail820 # fall to e801 if it fails
-
-# cmpl $1, 16(%di) # is this usable memory?
-# jne again820
-
- # If this is usable memory, we save it by simply advancing %di by
- # sizeof(e820rec).
- #
-good820:
- movb (E820NR), %al # up to 128 entries
- cmpb $E820MAX, %al
- jae bail820
-
- incb (E820NR)
- movw %di, %ax
- addw $20, %ax
- movw %ax, %di
-again820:
- cmpl $0, %ebx # check to see if
- jne jmpe820 # %ebx is set to EOF
-bail820:
-
-
-# method E801H:
-# memory size is in 1k chunksizes, to avoid confusing loadlin.
-# we store the 0xe801 memory size in a completely different place,
-# because it will most likely be longer than 16 bits.
-# (use 1e0 because that's what Larry Augustine uses in his
-# alternative new memory detection scheme, and it's sensible
-# to write everything into the same place.)
-
-meme801:
- stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which don't clear/set
- xorw %dx,%dx # carry on pass/error of
- # e801h memory size call
- # or merely pass cx,dx though
- # without changing them.
- movw $0xe801, %ax
- int $0x15
- jc mem88
-
- cmpw $0x0, %cx # Kludge to handle BIOSes
- jne e801usecxdx # which report their extended
- cmpw $0x0, %dx # memory in AX/BX rather than
- jne e801usecxdx # CX/DX. The spec I have read
- movw %ax, %cx # seems to indicate AX/BX
- movw %bx, %dx # are more reasonable anyway...
-
-e801usecxdx:
- andl $0xffff, %edx # clear sign extend
- shll $6, %edx # and go from 64k to 1k chunks
- movl %edx, (0x1e0) # store extended memory size
- andl $0xffff, %ecx # clear sign extend
- addl %ecx, (0x1e0) # and add lower memory into
- # total size.
-
-# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
-# 64mb, depending on the bios) in ax.
-mem88:
-
-#endif
- movb $0x88, %ah
- int $0x15
- movw %ax, (2)
-
-# Set the keyboard repeat rate to the max
- movw $0x0305, %ax
- xorw %bx, %bx
- int $0x16
-
-#ifndef CONFIG_VGA_NOPROBE
-
-# Check for video adapter and its parameters and allow the
-# user to browse video modes.
- call video # NOTE: we need %ds pointing
- # to bootsector
-#endif
-
-# Get hd0 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x41), %si
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- pushw %ax
- movw %ax, %es
- movw $0x0080, %di
- movw $0x10, %cx
- pushw %cx
- cld
- rep
- movsb
-# Get hd1 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x46), %si
- popw %cx
- popw %es
- movw $0x0090, %di
- rep
- movsb
-# Check that there IS a hd1 :-)
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
- jc no_disk1
-
- cmpb $3, %ah
- je is_disk1
-
-no_disk1:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw $0x0090, %di
- movw $0x10, %cx
- xorw %ax, %ax
- cld
- rep
- stosb
-is_disk1:
-# check for Micro Channel (MCA) bus
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- xorw %ax, %ax
- movw %ax, (0xa0) # set table length to 0
- movb $0xc0, %ah
- stc
- int $0x15 # moves feature table to es:bx
- jc no_mca
-
- pushw %ds
- movw %es, %ax
- movw %ax, %ds
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw %bx, %si
- movw $0xa0, %di
- movw (%si), %cx
- addw $2, %cx # table length is a short
- cmpw $0x10, %cx
- jc sysdesc_ok
-
- movw $0x10, %cx # we keep only first 16 bytes
-sysdesc_ok:
- rep
- movsb
- popw %ds
-no_mca:
-#ifdef CONFIG_X86_VOYAGER
- movb $0xff, 0x40 # flag on config found
- movb $0xc0, %al
- mov $0xff, %ah
- int $0x15 # put voyager config info at es:di
- jc no_voyager
- movw $0x40, %si # place voyager info in apm table
- cld
- movw $7, %cx
-voyager_rep:
- movb %es:(%di), %al
- movb %al,(%si)
- incw %di
- incw %si
- decw %cx
- jnz voyager_rep
-no_voyager:
-#endif
-# Check for PS/2 pointing device
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- movb $0, (0x1ff) # default is no pointing device
- int $0x11 # int 0x11: equipment list
- testb $0x04, %al # check if mouse installed
- jz no_psmouse
-
- movb $0xAA, (0x1ff) # device present
-no_psmouse:
-
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
- movl $0x0000E980, %eax # IST Support
- movl $0x47534943, %edx # Request value
- int $0x15
-
- movl %eax, (96)
- movl %ebx, (100)
- movl %ecx, (104)
- movl %edx, (108)
-#endif
-
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-# Then check for an APM BIOS...
- # %ds points to the bootsector
- movw $0, 0x40 # version = 0 means no APM BIOS
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- int $0x15
- jc done_apm_bios # Nope, no APM BIOS
-
- cmpw $0x0504d, %bx # Check for "PM" signature
- jne done_apm_bios # No signature, no APM BIOS
-
- andw $0x02, %cx # Is 32 bit supported?
- je done_apm_bios # No 32-bit, no (good) APM BIOS
-
- movw $0x05304, %ax # Disconnect first just in case
- xorw %bx, %bx
- int $0x15 # ignore return code
- movw $0x05303, %ax # 32 bit connect
- xorl %ebx, %ebx
- xorw %cx, %cx # paranoia :-)
- xorw %dx, %dx # ...
- xorl %esi, %esi # ...
- xorw %di, %di # ...
- int $0x15
- jc no_32_apm_bios # Ack, error.
-
- movw %ax, (66) # BIOS code segment
- movl %ebx, (68) # BIOS entry point offset
- movw %cx, (72) # BIOS 16 bit code segment
- movw %dx, (74) # BIOS data segment
- movl %esi, (78) # BIOS code segment lengths
- movw %di, (82) # BIOS data segment length
-# Redo the installation check as the 32 bit connect
-# modifies the flags returned on some BIOSs
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- xorw %cx, %cx # paranoia
- int $0x15
- jc apm_disconnect # error -> shouldn't happen
-
- cmpw $0x0504d, %bx # check for "PM" signature
- jne apm_disconnect # no sig -> shouldn't happen
-
- movw %ax, (64) # record the APM BIOS version
- movw %cx, (76) # and flags
- jmp done_apm_bios
-
-apm_disconnect: # Tidy up
- movw $0x05304, %ax # Disconnect
- xorw %bx, %bx
- int $0x15 # ignore return code
-
- jmp done_apm_bios
-
-no_32_apm_bios:
- andw $0xfffd, (76) # remove 32 bit support bit
-done_apm_bios:
-#endif
-
-#include "edd.S"
-
-# Now we want to move to protected mode ...
- cmpw $0, %cs:realmode_swtch
- jz rmodeswtch_normal
-
- lcall *%cs:realmode_swtch
-
- jmp rmodeswtch_end
-
-rmodeswtch_normal:
- pushw %cs
- call default_switch
-
-rmodeswtch_end:
-# Now we move the system to its rightful place ... but we check if we have a
-# big-kernel. In that case we *must* not move it ...
- testb $LOADED_HIGH, %cs:loadflags
- jz do_move0 # .. then we have a normal low
- # loaded zImage
- # .. or else we have a high
- # loaded bzImage
- jmp end_move # ... and we skip moving
-
-do_move0:
- movw $0x100, %ax # start of destination segment
- movw %cs, %bp # aka SETUPSEG
- subw $DELTA_INITSEG, %bp # aka INITSEG
- movw %cs:start_sys_seg, %bx # start of source segment
- cld
-do_move:
- movw %ax, %es # destination segment
- incb %ah # instead of add ax,#0x100
- movw %bx, %ds # source segment
- addw $0x100, %bx
- subw %di, %di
- subw %si, %si
- movw $0x800, %cx
- rep
- movsw
- cmpw %bp, %bx # assume start_sys_seg > 0x200,
- # so we will perhaps read one
- # page more than needed, but
- # never overwrite INITSEG
- # because destination is a
- # minimum one page below source
- jb do_move
-
-end_move:
-# then we load the segment descriptors
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-
-# Check whether we need to be downward compatible with version <=201
- cmpl $0, cmd_line_ptr
- jne end_move_self # loader uses version >=202 features
- cmpb $0x20, type_of_loader
- je end_move_self # bootsect loader, we know of it
-
-# Boot loader doesnt support boot protocol version 2.02.
-# If we have our code not at 0x90000, we need to move it there now.
-# We also then need to move the params behind it (commandline)
-# Because we would overwrite the code on the current IP, we move
-# it in two steps, jumping high after the first one.
- movw %cs, %ax
- cmpw $SETUPSEG, %ax
- je end_move_self
-
- cli # make sure we really have
- # interrupts disabled !
- # because after this the stack
- # should not be used
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ss, %dx
- cmpw %ax, %dx
- jb move_self_1
-
- addw $INITSEG, %dx
- subw %ax, %dx # this will go into %ss after
- # the move
-move_self_1:
- movw %ax, %ds
- movw $INITSEG, %ax # real INITSEG
- movw %ax, %es
- movw %cs:setup_move_size, %cx
- std # we have to move up, so we use
- # direction down because the
- # areas may overlap
- movw %cx, %di
- decw %di
- movw %di, %si
- subw $move_self_here+0x200, %cx
- rep
- movsb
- ljmp $SETUPSEG, $move_self_here
-
-move_self_here:
- movw $move_self_here+0x200, %cx
- rep
- movsb
- movw $SETUPSEG, %ax
- movw %ax, %ds
- movw %dx, %ss
-end_move_self: # now we are at the right place
-
-#
-# Enable A20. This is at the very best an annoying procedure.
-# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
-# AMD Elan bug fix by Robert Schwebel.
-#
-
-#if defined(CONFIG_X86_ELAN)
- movb $0x02, %al # alternate A20 gate
- outb %al, $0x92 # this works on SC410/SC520
-a20_elan_wait:
- call a20_test
- jz a20_elan_wait
- jmp a20_done
-#endif
-
-
-A20_TEST_LOOPS = 32 # Iterations per wait
-A20_ENABLE_LOOPS = 255 # Total loops to try
-
-
-#ifndef CONFIG_X86_VOYAGER
-a20_try_loop:
-
- # First, see if we are on a system with no A20 gate.
-a20_none:
- call a20_test
- jnz a20_done
-
- # Next, try the BIOS (INT 0x15, AX=0x2401)
-a20_bios:
- movw $0x2401, %ax
- pushfl # Be paranoid about flags
- int $0x15
- popfl
-
- call a20_test
- jnz a20_done
-
- # Try enabling A20 through the keyboard controller
-#endif /* CONFIG_X86_VOYAGER */
-a20_kbc:
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- call a20_test # Just in case the BIOS worked
- jnz a20_done # but had a delayed reaction.
-#endif
-
- movb $0xD1, %al # command write
- outb %al, $0x64
- call empty_8042
-
- movb $0xDF, %al # A20 on
- outb %al, $0x60
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- # Wait until a20 really *is* enabled; it can take a fair amount of
- # time on certain systems; Toshiba Tecras are known to have this
- # problem.
-a20_kbc_wait:
- xorw %cx, %cx
-a20_kbc_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_kbc_wait_loop
-
- # Final attempt: use "configuration port A"
-a20_fast:
- inb $0x92, %al # Configuration Port A
- orb $0x02, %al # "fast A20" version
- andb $0xFE, %al # don't accidentally reset
- outb %al, $0x92
-
- # Wait for configuration port A to take effect
-a20_fast_wait:
- xorw %cx, %cx
-a20_fast_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_fast_wait_loop
-
- # A20 is still not responding. Try frobbing it again.
- #
- decb (a20_tries)
- jnz a20_try_loop
-
- movw $a20_err_msg, %si
- call prtstr
-
-a20_die:
- hlt
- jmp a20_die
-
-a20_tries:
- .byte A20_ENABLE_LOOPS
-
-a20_err_msg:
- .ascii "linux: fatal error: A20 gate not responding!"
- .byte 13, 10, 0
-
- # If we get here, all is good
-a20_done:
-
-#endif /* CONFIG_X86_VOYAGER */
-# set up gdt and idt and 32bit start address
- lidt idt_48 # load idt with 0,0
- xorl %eax, %eax # Compute gdt_base
- movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
- shll $4, %eax
- addl %eax, code32
- addl $gdt, %eax
- movl %eax, (gdt_48+2)
- lgdt gdt_48 # load gdt with whatever is
- # appropriate
-
-# make sure any possible coprocessor is properly reset..
- xorw %ax, %ax
- outb %al, $0xf0
- call delay
-
- outb %al, $0xf1
- call delay
-
-# well, that went ok, I hope. Now we mask all interrupts - the rest
-# is done in init_IRQ().
- movb $0xFF, %al # mask all interrupts for now
- outb %al, $0xA1
- call delay
-
- movb $0xFB, %al # mask all irq's but irq2 which
- outb %al, $0x21 # is cascaded
-
-# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-# need no steenking BIOS anyway (except for the initial loading :-).
-# The BIOS-routine wants lots of unnecessary data, and it's less
-# "interesting" anyway. This is how REAL programmers do it.
-#
-# Well, now's the time to actually move into protected mode. To make
-# things as simple as possible, we do no register set-up or anything,
-# we let the gnu-compiled 32-bit programs do that. We just jump to
-# absolute address 0x1000 (or the loader supplied one),
-# in 32-bit protected mode.
-#
-# Note that the short jump isn't strictly needed, although there are
-# reasons why it might be a good idea. It won't hurt in any case.
- movw $1, %ax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp flush_instr
-
-flush_instr:
- xorw %bx, %bx # Flag to indicate a boot
- xorl %esi, %esi # Pointer to real-mode code
- movw %cs, %si
- subw $DELTA_INITSEG, %si
- shll $4, %esi # Convert to 32-bit pointer
-
-# jump to startup_32 in arch/i386/boot/compressed/head.S
-#
-# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__BOOT_CS
-#
-# but we yet haven't reloaded the CS register, so the default size
-# of the target offset still is 16 bit.
-# However, using an operand prefix (0x66), the CPU will properly
-# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-# Manual, Mixing 16-bit and 32-bit code, page 16-6)
-
- .byte 0x66, 0xea # prefix + jmpi-opcode
-code32: .long startup_32 # will be set to %cs+startup_32
- .word __BOOT_CS
-.code32
-startup_32:
- movl $(__BOOT_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %fs
- movl %eax, %gs
- movl %eax, %ss
-
- xorl %eax, %eax
-1: incl %eax # check that A20 really IS enabled
- movl %eax, 0x00000000 # loop forever if it isn't
- cmpl %eax, 0x00100000
- je 1b
-
- # Jump to the 32bit entry point
- jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
-.code16
-
-# Here's a bunch of information about your current kernel..
-kernel_version: .ascii UTS_RELEASE
- .ascii " ("
- .ascii LINUX_COMPILE_BY
- .ascii "@"
- .ascii LINUX_COMPILE_HOST
- .ascii ") "
- .ascii UTS_VERSION
- .byte 0
-
-# This is the default real mode switch routine.
-# to be called just before protected mode transition
-default_switch:
- cli # no interrupts allowed !
- movb $0x80, %al # disable NMI for bootup
- # sequence
- outb %al, $0x70
- lret
-
-
-#ifndef CONFIG_X86_VOYAGER
-# This routine tests whether or not A20 is enabled. If so, it
-# exits with zf = 0.
-#
-# The memory address used, 0x200, is the int $0x80 vector, which
-# should be safe.
-
-A20_TEST_ADDR = 4*0x80
-
-a20_test:
- pushw %cx
- pushw %ax
- xorw %cx, %cx
- movw %cx, %fs # Low memory
- decw %cx
- movw %cx, %gs # High memory area
- movw $A20_TEST_LOOPS, %cx
- movw %fs:(A20_TEST_ADDR), %ax
- pushw %ax
-a20_test_wait:
- incw %ax
- movw %ax, %fs:(A20_TEST_ADDR)
- call delay # Serialize and make delay constant
- cmpw %gs:(A20_TEST_ADDR+0x10), %ax
- loope a20_test_wait
-
- popw %fs:(A20_TEST_ADDR)
- popw %ax
- popw %cx
- ret
-
-#endif /* CONFIG_X86_VOYAGER */
-
-# This routine checks that the keyboard command queue is empty
-# (after emptying the output buffers)
-#
-# Some machines have delusions that the keyboard buffer is always full
-# with no keyboard attached...
-#
-# If there is no keyboard controller, we will usually get 0xff
-# to all the reads. With each IO taking a microsecond and
-# a timeout of 100,000 iterations, this can take about half a
-# second ("delay" == outb to port 0x80). That should be ok,
-# and should also be plenty of time for a real keyboard controller
-# to empty.
-#
-
-empty_8042:
- pushl %ecx
- movl $100000, %ecx
-
-empty_8042_loop:
- decl %ecx
- jz empty_8042_end_loop
-
- call delay
-
- inb $0x64, %al # 8042 status port
- testb $1, %al # output buffer?
- jz no_output
-
- call delay
- inb $0x60, %al # read it
- jmp empty_8042_loop
-
-no_output:
- testb $2, %al # is input buffer full?
- jnz empty_8042_loop # yes - loop
-empty_8042_end_loop:
- popl %ecx
- ret
-
-# Read the cmos clock. Return the seconds in al
-gettime:
- pushw %cx
- movb $0x02, %ah
- int $0x1a
- movb %dh, %al # %dh contains the seconds
- andb $0x0f, %al
- movb %dh, %ah
- movb $0x04, %cl
- shrb %cl, %ah
- aad
- popw %cx
- ret
-
-# Delay is needed after doing I/O
-delay:
- outb %al,$0x80
- ret
-
-# Descriptor tables
-#
-# NOTE: The intel manual says gdt should be sixteen bytes aligned for
-# efficiency reasons. However, there are machines which are known not
-# to boot with misaligned GDTs, so alter this at your peril! If you alter
-# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
-# empty GDT entries (one for NULL and one reserved).
-#
-# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
-# true for the Voyager Quad CPU card which will not boot without
-# This directive. 16 byte aligment is recommended by intel.
-#
- .align 16
-gdt:
- .fill GDT_ENTRY_BOOT_CS,8,0
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9A00 # code read/exec
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-gdt_end:
- .align 4
-
- .word 0 # alignment byte
-idt_48:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
- .word 0 # alignment byte
-gdt_48:
- .word gdt_end - gdt - 1 # gdt limit
- .word 0, 0 # gdt base (filled in later)
-
-#ifndef CONFIG_VGA_NOPROBE
-# Include video setup & detection code
-
-#include "video.S"
-#endif
-
-# Setup signature -- must be last
-setup_sig1: .word SIG1
-setup_sig2: .word SIG2
-
-# After this point, there is some free space which is used by the video mode
-# handling code to store the temporary mode table (not used by the kernel).
-
-modelist:
-
-.text
-endtext:
-.data
-enddata:
-.bss
-endbss:
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig b/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig
deleted file mode 100644
index f1675e8631..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig
+++ /dev/null
@@ -1,2183 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Wed Jun 20 08:26:53 2007
-#
-CONFIG_X86_32=y
-CONFIG_GENERIC_TIME=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_X86=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_SMP is not set
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-CONFIG_MGEODE_LX=y
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
-CONFIG_X86_XADD=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_MODEL=4
-# CONFIG_HPET_TIMER is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_MCE is not set
-# CONFIG_VM86 is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_MICROCODE is not set
-CONFIG_X86_MSR=y
-CONFIG_X86_CPUID=m
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_NR_QUICK=1
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_VGA_NOPROBE is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x400000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-# CONFIG_COMPAT_VDSO is not set
-
-#
-# Power management options (ACPI, APM)
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-CONFIG_PM_DEBUG=y
-CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
-# CONFIG_PM_TRACE is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-# CONFIG_ACPI is not set
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOANY is not set
-CONFIG_PCI_GOOLPC=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_OLPC=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-CONFIG_GEODE_MFGPT_TIMER=y
-CONFIG_OLPC=y
-CONFIG_OLPC_PM=y
-CONFIG_OPEN_FIRMWARE=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_DIAG is not set
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_DEFAULT_BIC=y
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-# CONFIG_NETLABEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-# CONFIG_NET_ACT_IPT is not set
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_CAFE=y
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=m
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_BLK_DEV_CMD640 is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_PRISM54_USB is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ACX_PCI is not set
-# CONFIG_ACX_USB is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-# CONFIG_MOUSE_PS2_ALPS is not set
-# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_OLPC=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_ITCO_WDT is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_PC87413_WDT is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
-CONFIG_HW_RANDOM_GEODE=y
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_NVRAM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_NSC_GPIO is not set
-CONFIG_CS5535_GPIO=m
-# CONFIG_RAW_DRIVER is not set
-CONFIG_HANGCHECK_TIMER=m
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_SCx200_ACB=y
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_BATTERY_OLPC=y
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_OV7670=y
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-CONFIG_VIDEO_CAFE_CCIC=y
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_PROGEAR is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_VGASTATE=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-CONFIG_FB_VESA=y
-# CONFIG_FB_HECUBA is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_FB_GEODE_GX=y
-# CONFIG_FB_GEODE_GX1 is not set
-CONFIG_FB_OLPC_DCON=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FONT_SUN12x22=y
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-# CONFIG_SND_SERIAL_U16550 is not set
-CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-CONFIG_SND_CS5535AUDIO=y
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=m
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AC97_POWER_SAVE=y
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_USX2Y=m
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-CONFIG_USB_PERSIST=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-# CONFIG_EDAC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Virtualization
-#
-# CONFIG_KVM is not set
-
-#
-# Sysprof
-#
-CONFIG_SYSPROF=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_PROMFS_FS=y
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-CONFIG_JFFS2_FS_SECURITY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUG_STACK_USAGE=y
-
-#
-# Page alloc debug is incompatible with Software Suspend on i386
-#
-CONFIG_DEBUG_RODATA=y
-CONFIG_4KSTACKS=y
-CONFIG_DOUBLEFAULT=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-# CONFIG_CRYPTO_DEV_PADLOCK is not set
-CONFIG_CRYPTO_DEV_GEODE=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_KTIME_SCALAR=y
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c
deleted file mode 100644
index 2e62a41e7f..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
- *
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* The MFPGT timers on the CS5536 provide us with suitable timers to use
- * as clock event sources - not as good as a HPET or APIC, but certainly
- * better then the PIT. This isn't a general purpose MFGPT driver, but
- * a simplified one designed specifically to act as a clock event source.
- * For full details about the MFGPT, please consult the CS5536 data sheet.
-*/
-
-/* We are using the 32Khz input clock - its the only one that has the
- * ranges we find desirable. The following table lists the suitable
- * divisors and the associated hz, minimum interval
- * and the maximum interval:
-
- Divisor Hz Min Delta (S) Max Delta (S)
- 1 32000 .0005 2.048
- 2 16000 .001 4.096
- 4 8000 .002 8.192
- 8 4000 .004 16.384
- 16 2000 .008 32.768
- 32 1000 .016 65.536
- 64 500 .032 131.072
- 128 250 .064 262.144
- 256 125 .128 524.288
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <asm/geode.h>
-
-#include "do_timer.h"
-
-#define MFGPT_MAX_TIMERS 8
-
-#define F_AVAIL 0x01
-
-static struct mfgpt_timer_t {
- int flags;
- struct module *owner;
-} mfgpt_timers[MFGPT_MAX_TIMERS];
-
-/* Selected from the table above */
-
-#define MFGPT_DIVISOR 16
-#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
-#define MFGPT_HZ (32000 / MFGPT_DIVISOR)
-#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-static int __init mfgpt_timer_setup(void);
-#else
-#define mfgpt_timer_setup() (0)
-#endif
-
-/* Allow for disabling of MFGPTs */
-static int disable = 0;
-static int __init mfgpt_disable(char *s)
-{
- disable = 1;
- return 1;
-}
-__setup("nomfgpt", mfgpt_disable);
-
-/*
- * Check whether any MFGPTs are available for the kernel to use. In most
- * cases, firmware that uses AMD's VSA code will claim all timers during
- * bootup; we certainly don't want to take them if they're already in use.
- * In other cases (such as with VSAless OpenFirmware), the system firmware
- * leaves timers available for us to use.
- */
-int __init geode_mfgpt_detect(void)
-{
- int count = 0, i;
- u16 val;
-
- if (disable) {
- printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n");
- return 0;
- }
-
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
- if (!(val & MFGPT_SETUP_SETUP)) {
- mfgpt_timers[i].flags = F_AVAIL;
- count++;
- }
- }
-
- /* set up clock event device, if desired */
- i = mfgpt_timer_setup();
-
- return count;
-}
-
-int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
-{
- u32 msr, mask, value, dummy;
- int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- /*
- * The register maps for these are described in sections 6.17.1.x of
- * the AMD Geode CS5536 Companion Device Data Book.
- */
- switch(event) {
- case MFGPT_EVENT_RESET:
- /* XXX: According to the docs, we cannot reset timers above
- * 6; that is, resets for 7 and 8 will be ignored. Is this
- * a problem? */
- msr = MFGPT_NR_MSR;
- mask = 1 << (timer + 24);
- break;
-
- case MFGPT_EVENT_NMI:
- msr = MFGPT_NR_MSR;
- mask = 1 << (timer + shift);
- break;
-
- case MFGPT_EVENT_IRQ:
- msr = MFGPT_IRQ_MSR;
- mask = 1 << (timer + shift);
- break;
-
- default:
- return -EIO;
- }
-
- rdmsr(msr, value, dummy);
-
- if (enable)
- value |= mask;
- else
- value &= ~mask;
-
- wrmsr(msr, value, dummy);
- return 0;
-}
-EXPORT_SYMBOL(geode_mfgpt_toggle_event);
-
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
-{
- u32 val, dummy;
- int offset;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
- return -EIO;
-
- rdmsr(0x51400022, val, dummy);
-
- offset = (timer % 4) * 4;
-
- val &= ~((0xF << offset) | (0xF << (offset + 16)));
-
- if (enable) {
- val |= (irq & 0x0F) << (offset);
- val |= (irq & 0x0F) << (offset + 16);
- }
-
- wrmsr(0x51400022, val, dummy);
- return 0;
-}
-EXPORT_SYMBOL(geode_mfgpt_set_irq);
-
-static int mfgpt_get(int timer, struct module *owner)
-{
- mfgpt_timers[timer].flags &= ~F_AVAIL;
- mfgpt_timers[timer].owner = owner;
- printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
- return timer;
-}
-
-int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner)
-{
- int i;
-
- if (!geode_get_dev_base(GEODE_DEV_MFGPT))
- return -ENODEV;
- if (timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- if (timer < 0) {
- /* Try to find an available timer */
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- if (mfgpt_timers[i].flags & F_AVAIL)
- return mfgpt_get(i, owner);
-
- if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
- break;
- }
- }
- else {
- /* If they requested a specific timer, try to honor that */
- if (mfgpt_timers[timer].flags & F_AVAIL)
- return mfgpt_get(timer, owner);
- }
-
- /* No timers available - too bad */
- return -1;
-}
-EXPORT_SYMBOL(geode_mfgpt_alloc_timer);
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-
-static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
-static u16 mfgpt_event_clock;
-
-static int irq = 7;
-static int __init mfgpt_setup(char *str)
-{
- get_option(&str, &irq);
- return 1;
-}
-__setup("mfgpt_irq=", mfgpt_setup);
-
-static inline void mfgpt_disable_timer(u16 clock)
-{
- u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP);
- geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN);
-}
-
-static int mfgpt_next_event(unsigned long, struct clock_event_device *);
-static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
-
-static struct clock_event_device mfgpt_clockevent = {
- .name = "mfgpt-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = mfgpt_set_mode,
- .set_next_event = mfgpt_next_event,
- .rating = 250,
- .cpumask = CPU_MASK_ALL,
- .shift = 32
-};
-
-static inline void mfgpt_start_timer(u16 clock, u16 delta)
-{
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-}
-
-static void mfgpt_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- mfgpt_disable_timer(mfgpt_event_clock);
-
- if (mode == CLOCK_EVT_MODE_PERIODIC)
- mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC);
-
- mfgpt_tick_mode = mode;
-}
-
-static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- mfgpt_start_timer(mfgpt_event_clock, delta);
- return 0;
-}
-
-/* Assume (foolishly?), that this interrupt was due to our tick */
-
-static irqreturn_t mfgpt_tick(int irq, void *dev_id)
-{
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
- return IRQ_HANDLED;
-
- /* Turn off the clock */
- mfgpt_disable_timer(mfgpt_event_clock);
-
- /* Clear the counter */
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- /* Restart the clock in periodic mode */
-
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
- }
-
- mfgpt_clockevent.event_handler(&mfgpt_clockevent);
- return IRQ_HANDLED;
-}
-
-static struct irqaction mfgptirq = {
- .handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
- .mask = CPU_MASK_NONE,
- .name = "mfgpt-timer"
-};
-
-static int __init mfgpt_timer_setup(void)
-{
- int timer, ret;
- u16 val;
-
- timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE);
- if (timer < 0) {
- printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n");
- return -ENODEV;
- }
-
- mfgpt_event_clock = timer;
- /* Set the clock scale and enable the event mode for CMP2 */
- val = MFGPT_SCALE | (3 << 8);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
-
- /* Set up the IRQ on the MFGPT side */
- if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
- printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
- return -EIO;
- }
-
- /* And register it with the kernel */
- ret = setup_irq(irq, &mfgptirq);
-
- if (ret) {
- printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n");
- goto err;
- }
-
- /* Set up the clock event */
- mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
- mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent);
- mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent);
-
- printk("mfgpt-timer: registering the MFGT timer as a clock event.\n");
- clockevents_register_device(&mfgpt_clockevent);
-
- return 0;
-
-err:
- geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
- printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n");
- return -EIO;
-}
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c
deleted file mode 100644
index fdcd93629a..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * ofw.c - Open Firmware client interface for 32-bit systems.
- * This code is intended to be portable to any 32-bit Open Firmware
- * implementation with a standard client interface that can be
- * called when Linux is running.
- *
- * Copyright (C) 2007 Mitch Bradley <wmb@firmworks.com>
- * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
- */
-
-#include <stdarg.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/ofw.h>
-
-
-int (*call_firmware)(int *);
-
-static DEFINE_SPINLOCK(prom_lock);
-
-#define MAXARGS 20
-
-/*
- * The return value from ofw() in all cases is 0 if the attempt to call the
- * function succeeded, <0 otherwise. That return value is from the
- * gateway function only. Any results from the called function are returned
- * via output argument pointers.
- *
- * Here are call templates for all the standard OFW client services:
- *
- * ofw("test", 1, 1, namestr, &missing);
- * ofw("peer", 1, 1, phandle, &sibling_phandle);
- * ofw("child", 1, 1, phandle, &child_phandle);
- * ofw("parent", 1, 1, phandle, &parent_phandle);
- * ofw("instance_to_package", 1, 1, ihandle, &phandle);
- * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
- * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
- * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
- * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
- * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
- * ofw("finddevice", 1, 1, devspecstr, &phandle);
- * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
- * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
- * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
- * ofw("open", 1, 1, devspecstr, &ihandle);
- * ofw("close", 1, 0, ihandle);
- * ofw("read", 3, 1, ihandle, addr, len, &actual);
- * ofw("write", 3, 1, ihandle, addr, len, &actual);
- * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
- * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
- * ofw("release", 2, 0, virtaddr, size);
- * ofw("boot", 1, 0, bootspecstr);
- * ofw("enter", 0, 0);
- * ofw("exit", 0, 0);
- * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
- * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
- * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
- * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
- * ofw("milliseconds", 0, 1, &ms);
- */
-
-int ofw(char *name, int numargs, int numres, ...)
-{
- va_list ap;
- int argarray[MAXARGS+3];
- int argnum = 3;
- int retval;
- int *intp;
- unsigned long flags;
-
- if (!call_firmware)
- return -1;
- if ((numargs + numres) > MAXARGS)
- return -1; /* spit out an error? */
-
- argarray[0] = (int) name;
- argarray[1] = numargs;
- argarray[2] = numres;
-
- va_start(ap, numres);
- while (numargs) {
- argarray[argnum++] = va_arg(ap, int);
- numargs--;
- }
-
- spin_lock_irqsave(&prom_lock, flags);
- retval = call_firmware(argarray);
- spin_unlock_irqrestore(&prom_lock, flags);
-
- if (retval == 0) {
- while (numres) {
- intp = va_arg(ap, int *);
- *intp = argarray[argnum++];
- numres--;
- }
- }
- va_end(ap);
- return retval;
-}
-EXPORT_SYMBOL(ofw);
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c
deleted file mode 100644
index 93149f1c38..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* olpc-pm.c
- * © 2006 Red Hat, Inc.
- * Portions also copyright 2006 Advanced Micro Devices, Inc.
- * GPLv2
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/suspend.h>
-#include <linux/bootmem.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/mc146818rtc.h>
-#include <asm/io.h>
-
-#include <asm/olpc.h>
-
-/* A few words about accessing the ACPI and PM registers. Long story short,
- byte and word accesses of the ACPI and PM registers is broken. The only
- way to do it really correctly is to use dword accesses, which we do
- throughout this code. For more details, please consult Eratta 17 and 18
- here:
-
- http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
-*/
-
-#define PM_IRQ 3
-
-#define CS5536_PM_PWRBTN (1 << 8)
-#define CS5536_PM_RTC (1 << 10)
-
-#define GPIO_WAKEUP_EC (1 << 31)
-#define GPIO_WAKEUP_LID (1 << 30)
-
-#define PM_MODE_NORMAL 0
-#define PM_MODE_TEST 1
-#define PM_MODE_MAX 2
-
-/* These, and the battery EC commands, should be in an olpc.h. */
-#define EC_WRITE_SCI_MASK 0x1b
-#define EC_READ_SCI_MASK 0x1c
-
-extern void do_olpc_suspend_lowlevel(void);
-
-static struct {
- unsigned long address;
- unsigned short segment;
-} ofw_bios_entry = { 0, __KERNEL_CS };
-
-static int olpc_pm_mode = PM_MODE_NORMAL;
-static unsigned long acpi_base;
-static unsigned long pms_base;
-static int sci_irq;
-static int olpc_lid_flag;
-
-static struct input_dev *pm_inputdev;
-static struct input_dev *lid_inputdev;
-static struct input_dev *ebook_inputdev;
-static struct pm_ops olpc_pm_ops;
-
-static int gpio_wake_events = 0;
-static int ebook_state = -1;
-static u16 olpc_wakeup_mask = 0;
-
-struct platform_device olpc_powerbutton_dev = {
- .name = "powerbutton",
- .id = -1,
-};
-
-struct platform_device olpc_lid_dev = {
- .name = "lid",
- .id = -1,
-};
-
-static void __init init_ebook_state(void)
-{
- if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
- printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n");
- ebook_state = 0;
- }
- ebook_state &= 1;
-
- /* the input layer needs to know what value to default to as well */
- input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
- input_sync(ebook_inputdev);
-}
-
-static void (*battery_callback)(unsigned long);
-static DEFINE_SPINLOCK(battery_callback_lock);
-
-/* propagate_events is non-NULL if run from workqueue,
- NULL when called at init time to flush SCI queue */
-static void process_sci_queue(struct work_struct *propagate_events)
-{
- unsigned char data = 0;
- unsigned char battery_events = 0;
- int ret;
-
- do {
- ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
- if (!ret) {
- printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n",
- data);
-
- switch (data) {
- case EC_SCI_SRC_EMPTY:
- case EC_SCI_SRC_GAME:
- case EC_SCI_SRC_WLAN:
- /* we ignore these for now */
- break;
- case EC_SCI_SRC_BATERR:
- printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n");
- case EC_SCI_SRC_BATSOC:
- case EC_SCI_SRC_BATTERY:
- case EC_SCI_SRC_ACPWR:
- battery_events |= data;
- break;
- case EC_SCI_SRC_EBOOK:
- ebook_state = !ebook_state;
- if (propagate_events) {
- input_report_switch(ebook_inputdev,
- SW_TABLET_MODE, ebook_state);
- input_sync(ebook_inputdev);
- }
- break;
- default:
- printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data);
- }
- }
- } while (data && !ret);
-
- if (battery_events && battery_callback && propagate_events) {
- void (*cbk)(unsigned long);
-
- /* Older EC versions didn't distinguish between AC and battery
- events */
- if (olpc_platform_info.ecver < 0x45)
- battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
-
- spin_lock(&battery_callback_lock);
- cbk = battery_callback;
- spin_unlock(&battery_callback_lock);
-
- cbk(battery_events);
- }
-
- if (ret)
- printk(KERN_WARNING "Failed to clear SCI queue!\n");
-}
-
-static DECLARE_WORK(sci_work, process_sci_queue);
-
-void olpc_register_battery_callback(void (*f)(unsigned long))
-{
- spin_lock(&battery_callback_lock);
- battery_callback = f;
- spin_unlock(&battery_callback_lock);
-}
-EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
-
-void olpc_deregister_battery_callback(void)
-{
- spin_lock(&battery_callback_lock);
- battery_callback = NULL;
- spin_unlock(&battery_callback_lock);
- cancel_work_sync(&sci_work);
-}
-EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
-
-
-static int olpc_pm_interrupt(int irq, void *id)
-{
- uint32_t sts, gpe = 0;
-
- sts = inl(acpi_base + PM1_STS);
- outl(sts | 0xFFFF, acpi_base + PM1_STS);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- gpe = inl(acpi_base + PM_GPE0_STS);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
- }
-
- if (sts & CS5536_PM_PWRBTN) {
- input_report_key(pm_inputdev, KEY_POWER, 1);
- input_sync(pm_inputdev);
- printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n");
- /* Do we need to delay this (and hence schedule_work)? */
- input_report_key(pm_inputdev, KEY_POWER, 0);
- input_sync(pm_inputdev);
- }
-
- if (gpe & GPIO_WAKEUP_EC) {
- geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
- schedule_work(&sci_work);
- }
-
- if (gpe & GPIO_WAKEUP_LID) {
- /* Disable events */
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-
- /* Clear the edge */
-
- if (olpc_lid_flag)
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* Clear the status too */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-
- /* The line is high when the LID is open, but SW_LID
- * should be high when the LID is closed, so we pass the old
- * value of olpc_lid_flag
- */
-
- input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
- input_sync(lid_inputdev);
-
- /* Swap the status */
- olpc_lid_flag = !olpc_lid_flag;
-
- if (olpc_lid_flag)
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* re-enable the event */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * For now, only support STR. We also don't support suspending on
- * B1s, due to difficulties with the cafe FPGA.
- */
-static int olpc_pm_state_valid(suspend_state_t pm_state)
-{
- if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1))
- return 1;
-
- return 0;
-}
-
-/* This is a catchall function for operations that just don't belong
- * anywhere else. Later we will evaluate if these belong in the
- * individual device drivers or the firmware.
- * If you add something to this function, please explain yourself with
- * a comment.
- */
-
-extern void gxfb_flatpanel_control(int state);
-
-static u32 gpio_wakeup[2];
-static u64 irq_sources[4];
-static u64 mfgpt_irq_msr, mfgpt_nr_msr;
-
-void olpc_fixup_wakeup(void)
-{
- u32 base = geode_gpio_base();
- int i;
-
- /* This clears any pending events from the status register -
- * the firmware also does this, but its possible that it tries
- * it too early before the key has a chance to debounce
- */
-
- outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
-
- /* Enable the flatpanel sequencing as early as possible, because
- it takes ~64ms to resume. This probably belongs in the firmware */
-
- //gxfb_flatpanel_control(1);
-
- /* Restore the interrupt sources */
- wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
- wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
- wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
- wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-
- /* Restore the X and Y sources for GPIO */
- outl(gpio_wakeup[0], base + GPIO_MAP_X);
- outl(gpio_wakeup[1], base + GPIO_MAP_Y);
-
- /* Resture the MFGPT MSRs */
- wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
- wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-
- for (i=0;i<2;i++) {
- /* tell the wireless module to restart USB communication */
- olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
- }
-}
-
-void olpc_fixup_sleep(void)
-{
- u32 base = geode_gpio_base();
- int i;
-
- /* Save the X and Y sources for GPIO */
- gpio_wakeup[0] = inl(base + GPIO_MAP_X);
- gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
-
- /* Save the Y and Z unrestricted sources */
-
- rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
- rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
- rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
- rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-
- /* Turn off the MFGPT timers on the way down */
-
- for(i = 0; i < 8; i++) {
- u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
-
- if (val & MFGPT_SETUP_SETUP) {
- val &= ~MFGPT_SETUP_CNTEN;
- geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
- }
- }
-
- /* Save the MFGPT MSRs */
- rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
- rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-
- if (device_may_wakeup(&olpc_powerbutton_dev.dev))
- olpc_wakeup_mask |= CS5536_PM_PWRBTN;
- else
- olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
-
- if (device_may_wakeup(&olpc_lid_dev.dev)) {
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- gpio_wake_events |= GPIO_WAKEUP_LID;
- } else {
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- gpio_wake_events &= ~(GPIO_WAKEUP_LID);
- }
-}
-
-static int olpc_pm_enter(suspend_state_t pm_state)
-{
- /* Only STR is supported */
- if (pm_state != PM_SUSPEND_MEM)
- return -EINVAL;
-
- olpc_fixup_sleep();
-
- /* Set the GPIO wakeup bits */
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-
- /* Save CPU state */
- do_olpc_suspend_lowlevel();
-
- olpc_fixup_wakeup();
-
- /* Restore the SCI wakeup events */
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
-
- return 0;
-}
-
-int asmlinkage olpc_do_sleep(u8 sleep_state)
-{
- void *pgd_addr = __va(read_cr3());
- printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
- * that gcc doesn't optimize
- * away our __va! */
- /* FIXME: Set the SCI bits we want to wake up on here */
-
- /* FIXME: Set any other SCI events that we might want here */
-
- outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
-
- /* If we are in test mode, then just return (simulate a successful
- suspend/resume). Otherwise, if we are doing the real thing,
- then go for the gusto */
-
- if (olpc_pm_mode != PM_MODE_TEST) {
- __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
- __asm__("call *(%%edi); cld"
- : : "D" (&ofw_bios_entry));
- }
-
- return 0;
-}
-
-/* This code will slowly disappear as we fixup the issues in the BIOS */
-
-static void __init olpc_fixup_bios(void)
-{
- unsigned long hi, lo;
-
- if (olpc_has_vsa()) {
- /* The VSA aggressively sets up the ACPI and PM register for
- * trapping - its not enough to force these values in the BIOS -
- * they seem to be changed during PCI init as well.
- */
-
- /* Change the PM registers to decode to the DD */
-
- rdmsr(0x510100e2, lo, hi);
- hi |= 0x80000000;
- wrmsr(0x510100e2, lo, hi);
-
- /* Change the ACPI registers to decode to the DD */
-
- rdmsr(0x510100e3, lo, hi);
- hi |= 0x80000000;
- wrmsr(0x510100e3, lo, hi);
- }
-
- /* GPIO24 controls WORK_AUX */
-
- geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
- geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- /* GPIO10 is connected to the thermal alarm */
- geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
- geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
-
- /* Set up to get LID events */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
-
- /* Clear edge detection and event enable for now */
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-
- /* Set the LID to cause an PME event on group 6 */
- geode_gpio_event_pme(OLPC_GPIO_LID, 6);
-
- /* Set PME group 6 to fire the SCI interrupt */
- geode_gpio_set_irq(6, sci_irq);
- }
-
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
-
- /* Clear pending events */
-
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
-
- //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
-
- /* Set the SCI to cause a PME event on group 7 */
- geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
-
- /* And have group 6 also fire the SCI interrupt */
- geode_gpio_set_irq(7, sci_irq);
-}
-
-/* This provides a control file for setting up testing of the
- power management system. For now, there is just one setting:
- "test" which means that we don't actually enter the power
- off routine.
-*/
-
-static const char * const pm_states[] = {
- [PM_MODE_NORMAL] = "normal",
- [PM_MODE_TEST] = "test",
-};
-
-extern struct mutex pm_mutex;
-extern struct kset power_subsys;
-
-static ssize_t control_show(struct kset *s, char *buf)
-{
- return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
-}
-
-static ssize_t control_store(struct kset *s, const char *buf, size_t n)
-{
- int i, len;
- char *p;
-
- p = memchr(buf, '\n', n);
- len = p ? p - buf : n;
-
- /* Grab the mutex */
- mutex_lock(&pm_mutex);
-
- for(i = 0; i < PM_MODE_MAX; i++) {
- if (!strncmp(buf, pm_states[i], len)) {
- olpc_pm_mode = i;
- break;
- }
- }
-
- mutex_unlock(&pm_mutex);
-
- return (i == PM_MODE_MAX) ? -EINVAL : n;
-}
-
-static struct subsys_attribute control_attr = {
- .attr = {
- .name = "olpc-pm",
- .mode = 0644,
- },
- .show = control_show,
- .store = control_store,
-};
-
-static struct attribute * olpc_attributes[] = {
- &control_attr.attr,
- NULL
-};
-
-static struct attribute_group olpc_attrs = {
- .attrs = olpc_attributes,
-};
-
-static int __init alloc_inputdevs(void)
-{
- int ret = -ENOMEM;
-
- pm_inputdev = input_allocate_device();
- if (!pm_inputdev)
- goto err;
-
- pm_inputdev->name = "OLPC PM";
- pm_inputdev->phys = "olpc_pm/input0";
- set_bit(EV_KEY, pm_inputdev->evbit);
- set_bit(KEY_POWER, pm_inputdev->keybit);
-
- ret = input_register_device(pm_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret);
- goto err;
- }
-
- lid_inputdev = input_allocate_device();
- if (!lid_inputdev)
- goto err;
-
- lid_inputdev->name = "OLPC lid switch";
- lid_inputdev->phys = "olpc_pm/input1";
- set_bit(EV_SW, lid_inputdev->evbit);
- set_bit(SW_LID, lid_inputdev->swbit);
-
- ret = input_register_device(lid_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret);
- goto err;
- }
-
- ebook_inputdev = input_allocate_device();
- if (!ebook_inputdev)
- goto err;
-
- ebook_inputdev->name = "OLPC ebook switch";
- ebook_inputdev->phys = "olpc_pm/input2";
- set_bit(EV_SW, ebook_inputdev->evbit);
- set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
-
- ret = input_register_device(ebook_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret);
- goto err;
- }
-
- return ret;
-err:
- if (ebook_inputdev) {
- input_unregister_device(ebook_inputdev);
- ebook_inputdev = NULL;
- }
- if (lid_inputdev) {
- input_unregister_device(lid_inputdev);
- lid_inputdev = NULL;
- }
- if (pm_inputdev) {
- input_unregister_device(pm_inputdev);
- pm_inputdev = NULL;
- }
-
- return ret;
-}
-
-static int __init olpc_pm_init(void)
-{
- uint32_t lo, hi;
- int ret;
- uint8_t ec_byte;
-
- if (!machine_is_olpc())
- return -ENODEV;
-
- acpi_base = geode_acpi_base();
- pms_base = geode_pms_base();
-
- if (!acpi_base || !pms_base)
- return -ENODEV;
-
- ret = alloc_inputdevs();
- if (ret)
- return ret;
-
- rdmsr(0x51400020, lo, hi);
- sci_irq = (lo >> 20) & 15;
-
- if (sci_irq) {
- printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
- } else {
- /* Zero doesn't mean zero -- it means masked */
- printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
- sci_irq = 3;
- lo |= 0x00300000;
- wrmsrl(0x51400020, lo);
- }
-
- olpc_fixup_bios();
-
- lo = inl(pms_base + PM_FSD);
-
- /* Lock, enable failsafe, 4 seconds */
- outl(0xc001f400, pms_base + PM_FSD);
-
- /* Here we set up the SCI events we're interested in during
- * real-time. We have no sleep button, and the RTC doesn't make
- * sense, so set up the power button
- */
-
- outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- gpio_wake_events |= GPIO_WAKEUP_LID;
-
- /* Get the current value of the GPIO, and set up the edges */
- olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
-
- /* Watch for the opposite edge */
-
- if (olpc_lid_flag)
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* Enable the event */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- }
-
- /* Set up the mask for wakeups the EC will generate SCIs on */
-
- ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1);
- if (ret)
- printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret);
-
- /* Disable battery 1% charge wakeups */
- ec_byte &= ~EC_SCI_SRC_BATSOC;
-
- ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
- if (ret)
- printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret);
-
- /* Set up the EC SCI */
-
- gpio_wake_events |= GPIO_WAKEUP_EC;
-
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-
- /* Select level triggered in PIC */
-
- if (sci_irq < 8) {
- lo = inb(0x4d0);
- lo |= 1 << sci_irq;
- outb(lo, 0x4d0);
- } else {
- lo = inb(0x4d1);
- lo |= 1 << (sci_irq - 8);
- outb(lo, 0x4d1);
- }
- /* Clear pending interrupt */
- outl(inl(acpi_base) | 0xFFFF, acpi_base);
- process_sci_queue(0); /* we just want to flush the queue here */
- init_ebook_state();
-
- /* Enable the interrupt */
-
- ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
-
- if (ret) {
- printk(KERN_ERR "Error registering SCI: %d\n", ret);
- return ret;
- }
-
- ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
- pm_set_ops(&olpc_pm_ops);
-
- sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
-
- return 0;
-}
-
-
-#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
-struct resource rtc_platform_resource[2] = {
- {
- .flags = IORESOURCE_IO,
- .start = RTC_PORT(0),
- .end = RTC_PORT(0) + RTC_IO_EXTENT
- },
- {
- .flags = IORESOURCE_IRQ,
- .start = 8,
- .end = 8,
- },
-};
-
-
-static void rtc_wake_on(struct device *dev)
-{
- olpc_wakeup_mask |= CS5536_PM_RTC;
-}
-
-static void rtc_wake_off(struct device *dev)
-{
- olpc_wakeup_mask &= ~(CS5536_PM_RTC);
-}
-
-static struct cmos_rtc_board_info rtc_info = {
- .rtc_day_alarm = 0,
- .rtc_mon_alarm = 0,
- .rtc_century = 0,
- .wake_on = rtc_wake_on,
- .wake_off = rtc_wake_off,
-};
-
-struct platform_device olpc_rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_platform_resource),
- .dev.platform_data = &rtc_info,
- .resource = rtc_platform_resource,
-};
-
-static int __init olpc_platform_init(void)
-{
- (void)platform_device_register(&olpc_rtc_device);
- device_init_wakeup(&olpc_rtc_device.dev, 1);
-
- (void)platform_device_register(&olpc_powerbutton_dev);
- device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
-
- (void)platform_device_register(&olpc_lid_dev);
- device_init_wakeup(&olpc_lid_dev.dev, 1);
-
- return 0;
-}
-arch_initcall(olpc_platform_init);
-#endif /* CONFIG_RTC_DRV_CMOS */
-
-static void olpc_pm_exit(void)
-{
- /* Clear any pending events, and disable them */
- outl(0xFFFF, acpi_base+2);
-
- free_irq(sci_irq, &acpi_base);
- input_unregister_device(pm_inputdev);
- input_unregister_device(lid_inputdev);
- input_unregister_device(ebook_inputdev);
-}
-
-static struct pm_ops olpc_pm_ops = {
- .valid = olpc_pm_state_valid,
- .enter = olpc_pm_enter,
-};
-
-module_init(olpc_pm_init);
-module_exit(olpc_pm_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S
deleted file mode 100644
index 9535c9a941..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S
+++ /dev/null
@@ -1,39 +0,0 @@
-.text
-
-ENTRY(olpc_sleep_asm)
-olpc_sleep:
- ;; Get the value of PM1_CNT and store it off
-
- add 08h, ax
- mov bx,dx
- in dx,eax
- or 2000h, ax
- mov ax,di
-
- ;; flush the cache
- wbinvd
-
- ;; GX2 must disable refresh before going into self-refresh
- mov 2000000180xh, ecx
- rdmsr
- mov eax, esi
- and 0FF0000FFh, eax
- wrmsr
-
- ;; Now, put the memory into self refresh
- mov 2004, cx
- xor edx, edx
- xor eax, eax
- mov 04h, al
- wrmsr
-
- ;; Thats all she wrote - time to go to sleep
-
- mov bx, dx
- movzx di, eax
- out eax, dx
-
- ;;
-
-
-
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S
deleted file mode 100644
index a92cc61e24..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S
+++ /dev/null
@@ -1,122 +0,0 @@
-.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-
-ALIGN
- .align 4096
-
-wakeup_start:
-# jmp wakeup_start
-
- cli
- cld
-
- # Clear any dangerous flags
-
- pushl $0
- popfl
-
- # Set up %cr3
- movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
- movl %eax, %cr3
-
- movl saved_cr4, %eax
- movl %eax, %cr4
-
- movl saved_cr0, %eax
- movl %eax, %cr0
-
- jmp 1f
-1:
- ljmpl $__KERNEL_CS,$wakeup_return
-
-
-.org 0x1000
-
-wakeup_return:
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
-
- lgdt saved_gdt
- lidt saved_idt
- lldt saved_ldt
- ljmp $(__KERNEL_CS),$1f
-1:
- movl %cr3, %eax
- movl %eax, %cr3
- wbinvd
-
- # Go back to the return point
- jmp ret_point
-
-save_registers:
- sgdt saved_gdt
- sidt saved_idt
- sldt saved_ldt
-
- pushl %edx
- movl %cr4, %edx
- movl %edx, saved_cr4
-
- movl %cr0, %edx
- movl %edx, saved_cr0
-
- popl %edx
-
-
- movl %ebx, saved_context_ebx
- movl %ebp, saved_context_ebp
- movl %esi, saved_context_esi
- movl %edi, saved_context_edi
-
- pushfl
- popl saved_context_eflags
-
- ret
-
-
-restore_registers:
- movl saved_context_ebp, %ebp
- movl saved_context_ebx, %ebx
- movl saved_context_esi, %esi
- movl saved_context_edi, %edi
-
- pushl saved_context_eflags
- popfl
-
- ret
-
-
-ENTRY(do_olpc_suspend_lowlevel)
- call save_processor_state
- call save_registers
-
- # This is the stack context we want to remember
- movl %esp, saved_context_esp
-
- pushl $3
- call olpc_do_sleep
-
- jmp wakeup_start
- .p2align 4,,7
-ret_point:
- movl saved_context_esp, %esp
-
- call restore_registers
- call restore_processor_state
- ret
-
-.data
-ALIGN
-
-saved_gdt: .long 0,0
-saved_idt: .long 0,0
-saved_ldt: .long 0
-saved_cr4: .long 0
-saved_cr0: .long 0
-
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c
deleted file mode 100644
index d540cb0eae..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/* Support for the OLPC DCON and OLPC EC access
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-
-#include <asm/olpc.h>
-#include <asm/ofw.h>
-
-/* This is our new multi-purpose structure used to contain the
- * information about the platform that we detect
- */
-
-struct olpc_platform_t olpc_platform_info;
-EXPORT_SYMBOL_GPL(olpc_platform_info);
-
-/*********************************************************************
- * EC locking and access
- *********************************************************************/
-
-static DEFINE_SPINLOCK(ec_lock);
-
-/* what the timeout *should* be (in ms) */
-#define EC_BASE_TIMEOUT 20
-
-/* the timeout that bugs in the EC might force us to actually use */
-static int ec_timeout = EC_BASE_TIMEOUT;
-
-static int __init olpc_ec_timeout_set(char *str)
-{
- if (get_option(&str, &ec_timeout) != 1) {
- ec_timeout = EC_BASE_TIMEOUT;
- printk(KERN_ERR "olpc-ec: invalid argument to "
- "'olpc_ec_timeout=', ignoring!\n");
- }
- printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
- ec_timeout);
- return 1;
-}
-__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
-
-/*
- * These *bf_status functions return whether the buffers are full or not.
- */
-
-static inline unsigned int ibf_status(unsigned int port)
-{
- return inb(port) & 0x02;
-}
-
-static inline unsigned int obf_status(unsigned int port)
-{
- return inb(port) & 0x01;
-}
-
-#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
-static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
-{
- unsigned int timeo;
- int state = ibf_status(port);
-
- for (timeo = ec_timeout; state != desired && timeo; timeo--) {
- mdelay(1);
- state = ibf_status(port);
- }
-
- if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
- timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
- printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n",
- EC_BASE_TIMEOUT-timeo, line);
- }
-
- return !(state == desired);
-}
-
-#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
-static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
-{
- unsigned int timeo;
- int state = obf_status(port);
-
- for (timeo = ec_timeout; state != desired && timeo; timeo--) {
- mdelay(1);
- state = obf_status(port);
- }
-
- if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
- timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
- printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n",
- EC_BASE_TIMEOUT-timeo, line);
- }
-
- return !(state == desired);
-}
-
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen)
-{
- unsigned long flags;
- int ret = -EIO;
- int i;
-
- spin_lock_irqsave(&ec_lock, flags);
-
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
- "quiesce!\n");
- goto err;
- }
-
-restart:
- /*
- * Note that if we time out during any IBF checks, that's a failure;
- * we have to return. There's no way for the kernel to clear that.
- *
- * If we time out during an OBF check, we can restart the command;
- * reissuing it will clear the OBF flag, and we should be alright.
- * The OBF flag will sometimes misbehave due to what we believe
- * is a hardware quirk..
- */
- printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
- outb(cmd, 0x6c);
-
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
- "command!\n");
- goto err;
- }
-
- if (inbuf && inlen) {
- /* write data to EC */
- for (i = 0; i < inlen; i++) {
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for"
- " EC accept data!\n");
- goto err;
- }
- printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
- inbuf[i]);
- outb(inbuf[i], 0x68);
- }
- }
- if (outbuf && outlen) {
- /* read data from EC */
- for (i = 0; i < outlen; i++) {
- if (wait_on_obf(0x6c, 1)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for"
- " EC to provide data!\n");
- goto restart;
- }
- outbuf[i] = inb(0x68);
- printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
- outbuf[i]);
- }
- }
-
- ret = 0;
-err:
- spin_unlock_irqrestore(&ec_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL_GPL(olpc_ec_cmd);
-
-/*********************************************************************
- * DCON stuff
- *********************************************************************/
-
-static void olpc_power_off(void)
-{
- printk(KERN_INFO "OLPC power off sequence...\n");
- outb(0xff, 0x381);
- outb(0x14, 0x382);
- outb(0x01, 0x383);
- outb(0xff, 0x381);
- outb(0x14, 0x382);
- outb(0x00, 0x383);
-}
-
-static void __init
-ec_detect(void)
-{
- olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
-}
-
-/* Check to see if this version of the OLPC board has VSA built
- * in, and set a flag
- */
-
-static void __init vsa_detect(void)
-{
- u16 rev;
-
- outw(0xFC53, 0xAC1C);
- outw(0x0003, 0xAC1C);
-
- rev = inw(0xAC1E);
-
- if (rev == 0x4132)
- olpc_platform_info.flags |= OLPC_F_VSA;
-}
-
-/* Map OFW revisions to what OLPC_REV_* */
-static const char __initdata *olpc_boardrev_str[] = {
- "A1",
- "preB1",
- "B1",
- "preB2",
- "B2",
- "preB3",
- "B3",
- "B4",
- "C1",
- "R1",
-};
-
-static void __init platform_detect(char *revision, size_t len)
-{
- size_t propsize;
- int i;
-
- BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN);
-
- if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) {
- printk(KERN_ERR "ofw: getprop call failed!\n");
- goto failed;
- }
- if (len < propsize) {
- printk(KERN_ERR "ofw: revision string is too long!\n");
- goto failed;
- }
-
- for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) {
- if (strcmp(revision, olpc_boardrev_str[i]) == 0) {
- olpc_platform_info.boardrev = i;
- return;
- }
- }
-
-failed:
- strncpy(revision, "Unknown", len);
- olpc_platform_info.boardrev = OLPC_REV_UNKNOWN;
-}
-
-static int olpc_dcon_present = -1;
-module_param(olpc_dcon_present, int, 0444);
-
-/* REV_A CMOS map:
- * bit 440; DCON present bit
- */
-
-#define OLPC_CMOS_DCON_OFFSET (440 / 8)
-#define OLPC_CMOS_DCON_MASK 0x01
-
-static int __init olpc_init(void)
-{
- unsigned char *romsig;
- char revision[10];
-
- spin_lock_init(&ec_lock);
-
- romsig = ioremap(0xffffffc0, 16);
-
- if (!romsig)
- return 0;
-
- if (strncmp(romsig, "CL1 Q", 7))
- goto unmap;
- if (strncmp(romsig+6, romsig+13, 3)) {
- printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
- goto unmap;
- }
- printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
-
- olpc_platform_info.flags |= OLPC_F_PRESENT;
-
- pm_power_off = olpc_power_off;
-
- /* Get the platform revision */
- platform_detect(revision, sizeof(revision));
-
- /* If olpc_dcon_present isn't set by the command line, then
- * "detect" it
- */
-
- if (olpc_dcon_present == -1) {
- /* B1 and greater always has a DCON */
- if (olpc_platform_info.boardrev >= OLPC_REV_B1 &&
- olpc_platform_info.boardrev < OLPC_REV_UNKNOWN)
- olpc_dcon_present = 1;
- }
-
- if (olpc_dcon_present)
- olpc_platform_info.flags |= OLPC_F_DCON;
-
- /* Get the EC revision */
- ec_detect();
-
- /* Check to see if the VSA exists */
- vsa_detect();
-
- printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision,
- olpc_platform_info.ecver);
-
- unmap:
- iounmap(romsig);
-
- return 0;
-}
-
-postcore_initcall(olpc_init);
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c
deleted file mode 100644
index d64bb276f2..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Procedures for creating, accessing and interpreting the device tree.
- *
- * Paul Mackerras August 1996.
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
- * {engebret|bergner}@us.ibm.com
- *
- * Adapted for sparc64 by David S. Miller davem@davemloft.net
- *
- * Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/prom.h>
-#include <asm/ofw.h>
-
-/*
- * XXX: This is very much a stub; right now we're keeping 2 device trees
- * in memory (one for promfs, and one here). That will not remain
- * for long!
- */
-
-static struct device_node *allnodes;
-
-/* use when traversing tree through the allnext, child, sibling,
- * or parent members of struct device_node.
- */
-static DEFINE_RWLOCK(devtree_lock);
-
-int of_device_is_compatible(const struct device_node *device,
- const char *compat)
-{
- const char* cp;
- int cplen, l;
-
- cp = of_get_property(device, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(of_device_is_compatible);
-
-struct device_node *of_get_parent(const struct device_node *node)
-{
- struct device_node *np;
-
- if (!node)
- return NULL;
-
- np = node->parent;
-
- return np;
-}
-EXPORT_SYMBOL(of_get_parent);
-
-struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev)
-{
- struct device_node *next;
-
- next = prev ? prev->sibling : node->child;
- for (; next != 0; next = next->sibling) {
- break;
- }
-
- return next;
-}
-EXPORT_SYMBOL(of_get_next_child);
-
-struct device_node *of_find_node_by_path(const char *path)
-{
- struct device_node *np = allnodes;
-
- for (; np != 0; np = np->allnext) {
- if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
- break;
- }
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_path);
-
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
- struct device_node *np;
-
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->node == handle)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != NULL; np = np->allnext)
- if (np->name != NULL && strcmp(np->name, name) == 0)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_name);
-
-struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != 0; np = np->allnext)
- if (np->type != 0 && strcmp(np->type, type) == 0)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_type);
-
-struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compatible)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != 0; np = np->allnext) {
- if (type != NULL
- && !(np->type != 0 && strcmp(np->type, type) == 0))
- continue;
- if (of_device_is_compatible(np, compatible))
- break;
- }
-
- return np;
-}
-EXPORT_SYMBOL(of_find_compatible_node);
-
-struct property *of_find_property(const struct device_node *np,
- const char *name,
- int *lenp)
-{
- struct property *pp;
-
- for (pp = np->properties; pp != 0; pp = pp->next) {
- if (strcasecmp(pp->name, name) == 0) {
- if (lenp != 0)
- *lenp = pp->length;
- break;
- }
- }
- return pp;
-}
-EXPORT_SYMBOL(of_find_property);
-
-/*
- * Find a property with a given name for a given node
- * and return the value.
- */
-const void *of_get_property(const struct device_node *np, const char *name,
- int *lenp)
-{
- struct property *pp = of_find_property(np,name,lenp);
- return pp ? pp->value : NULL;
-}
-EXPORT_SYMBOL(of_get_property);
-
-int of_getintprop_default(struct device_node *np, const char *name, int def)
-{
- struct property *prop;
- int len;
-
- prop = of_find_property(np, name, &len);
- if (!prop || len != 4)
- return def;
-
- return *(int *) prop->value;
-}
-EXPORT_SYMBOL(of_getintprop_default);
-
-int of_n_addr_cells(struct device_node *np)
-{
- const int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = of_get_property(np, "#address-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #address-cells property for the root node, default to 2 */
- return 2;
-}
-EXPORT_SYMBOL(of_n_addr_cells);
-
-int of_n_size_cells(struct device_node *np)
-{
- const int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = of_get_property(np, "#size-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #size-cells property for the root node, default to 1 */
- return 1;
-}
-EXPORT_SYMBOL(of_n_size_cells);
-
-int of_set_property(struct device_node *dp, const char *name, void *val, int len)
-{
- return -EIO;
-}
-EXPORT_SYMBOL(of_set_property);
-
-static unsigned int prom_early_allocated;
-
-static void * __init prom_early_alloc(unsigned long size)
-{
- void *ret;
-
- ret = kmalloc(size, GFP_KERNEL);
- if (ret != NULL)
- memset(ret, 0, size);
- else
- printk(KERN_ERR "ACK! couldn't allocate prom memory!\n");
-
- prom_early_allocated += size;
-
- return ret;
-}
-
-static int is_root_node(const struct device_node *dp)
-{
- if (!dp)
- return 0;
-
- return (dp->parent == NULL);
-}
-
-static char * __init build_path_component(struct device_node *dp)
-{
- int pathlen;
- char *n, *i;
-
- if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
- printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
- return "ERROR";
- }
- n = prom_early_alloc(pathlen + 1);
- if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
- printk(KERN_ERR "PROM: unable to get path name from OFW\n");
-
- if ((i = strrchr(n, '/')))
- n = ++i; /* we only want the file name */
- return n;
-}
-
-static char * __init build_full_name(struct device_node *dp)
-{
- int len, ourlen, plen;
- char *n;
-
- plen = strlen(dp->parent->full_name);
- ourlen = strlen(dp->path_component_name);
- len = ourlen + plen + 2;
-
- n = prom_early_alloc(len);
- strcpy(n, dp->parent->full_name);
- if (!is_root_node(dp->parent)) {
- strcpy(n + plen, "/");
- plen++;
- }
- strcpy(n + plen, dp->path_component_name);
-
- return n;
-}
-
-static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
-{
- static struct property *tmp = NULL;
- struct property *p;
-
- if (tmp) {
- p = tmp;
- memset(p, 0, sizeof(*p) + 32);
- tmp = NULL;
- } else {
- p = prom_early_alloc(sizeof(struct property) + 32);
- }
-
- p->name = (char *) (p + 1);
- if (special_name) {
- strcpy(p->name, special_name);
- p->length = special_len;
- p->value = prom_early_alloc(special_len);
- memcpy(p->value, special_val, special_len);
- } else {
- int fl;
- if (prev == NULL) {
- if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
- printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
- return NULL;
- }
- } else {
- if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
- printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
- return NULL;
- }
- }
- if (strlen(p->name) == 0 || fl != 1) {
- tmp = p;
- return NULL;
- }
- if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
- printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
- return NULL;
- }
- if (p->length <= 0) {
- p->length = 0;
- } else {
- p->value = prom_early_alloc(p->length + 1);
- if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
- printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
- return NULL;
- }
- ((unsigned char *)p->value)[p->length] = '\0';
- }
- }
- return p;
-}
-
-static struct property * __init build_prop_list(phandle node)
-{
- struct property *head, *tail;
-
- head = tail = build_one_prop(node, NULL,
- ".node", &node, sizeof(node));
-
- tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
- tail = tail->next;
- while(tail) {
- tail->next = build_one_prop(node, tail->name,
- NULL, NULL, 0);
- tail = tail->next;
- }
-
- return head;
-}
-
-static char * __init get_one_property(phandle node, const char *name)
-{
- char *buf = "<NULL>";
- int len;
-
- if (ofw("getproplen", 2, 1, node, name, &len)) {
- printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
- return NULL;
- }
- if (len > 0) {
- buf = prom_early_alloc(len);
- if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
- printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
- return NULL;
- }
- }
-
- return buf;
-}
-
-static struct device_node * __init create_node(phandle node, struct device_node *parent)
-{
- struct device_node *dp;
-
- if (!node)
- return NULL;
-
- dp = prom_early_alloc(sizeof(*dp));
- dp->parent = parent;
-
- kref_init(&dp->kref);
-
- dp->name = get_one_property(node, "name");
- dp->type = get_one_property(node, "device_type");
- dp->node = node;
-
- dp->properties = build_prop_list(node);
-
- return dp;
-}
-
-static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
-{
- struct device_node *ret = NULL, *prev_sibling = NULL;
- struct device_node *dp;
- u32 child;
-
- while (1) {
- dp = create_node(node, parent);
- if (!dp)
- break;
-
- if (prev_sibling)
- prev_sibling->sibling = dp;
-
- if (!ret)
- ret = dp;
- prev_sibling = dp;
-
- *(*nextp) = dp;
- *nextp = &dp->allnext;
-
- dp->path_component_name = build_path_component(dp);
- dp->full_name = build_full_name(dp);
-
- if (ofw("child", 1, 1, node, &child)) {
- printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
- return NULL;
- }
- dp->child = build_tree(dp, child, nextp);
-
- if (ofw("peer", 1, 1, node, &node)) {
- printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
- return NULL;
- }
- }
-
- return ret;
-}
-
-static phandle root_node;
-
-void __init prom_build_devicetree(void)
-{
- struct device_node **nextp;
- u32 child;
-
- if (ofw("peer", 1, 1, 0, &root_node)) {
- printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
- return;
- }
-
- allnodes = create_node(root_node, NULL);
- allnodes->path_component_name = "";
- allnodes->full_name = "/";
-
- nextp = &allnodes->allnext;
- if (ofw("child", 1, 1, allnodes->node, &child)) {
- printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
- return;
- }
- allnodes->child = build_tree(allnodes, child, &nextp);
- printk("PROM: Built device tree with %u bytes of memory.\n",
- prom_early_allocated);
-}
diff --git a/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c
deleted file mode 100644
index 1518d254c5..0000000000
--- a/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * olpcpci.c - Low-level PCI config space access for OLPC systems
- * without the VSA PCI virtualization software.
- *
- * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
- * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
- * that more or less behave like PCI devices, but the hardware doesn't
- * directly implement the PCI configuration space headers. AMD provides
- * "VSA" (Virtual System Architecture) software that emulates PCI config
- * space for these devices, by trapping I/O accesses to PCI config register
- * (CF8/CFC) and running some code in System Management Mode interrupt state.
- * On the OLPC platform, we don't want to use that VSA code because
- * (a) it slows down suspend/resume, and (b) recompiling it requires special
- * compilers that are hard to get. So instead of letting the complex VSA
- * code simulate the PCI config registers for the on-chip devices, we
- * just simulate them the easy way, by inserting the code into the
- * pci_write_config and pci_read_config path. Most of the config registers
- * are read-only anyway, so the bulk of the simulation is just table lookup.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/olpc.h>
-#include <asm/geode.h>
-#include "pci.h"
-
-static int is_lx;
-
-/*
- * In the tables below, the first two line (8 longwords) are the
- * size masks that are used when the higher level PCI code determines
- * the size of the region by writing ~0 to a base address register
- * and reading back the result.
- *
- * The following lines are the values that are read during normal
- * PCI config access cycles, i.e. not after just having written
- * ~0 to a base address register.
- */
-
-static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */
- 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */
- 0x0 , 0x0 , 0x0 , 0x28100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
- 0xfffffffd , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */
- 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */
- 0x0 , 0x0 , 0x0 , 0x28100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
- 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */
- 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
- 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */
- 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
- 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */
- 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
- 0x0 , 0x0 , 0x0 , 0x30100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
- 0xffffc000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */
- 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */
- 0x0 , 0x0 , 0x0 , 0x20821022 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-
-static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */
- 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
- 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 ,
-
- 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 ,
- 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
- 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
- 0xffffff81 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 ,
- 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */
- 0x0 , 0x0 , 0x0 , 0x20931022 ,
- 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
- 0xfffff000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20941022 , 0x2300006 , 0xc031002 , 0x0 ,
- 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
- 0x0 , 0x0 , 0x0 , 0x20941022 ,
- 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
- 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
- 0xfffff000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20951022 , 0x2300006 , 0xc032002 , 0x0 ,
- 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
- 0x0 , 0x0 , 0x0 , 0x20951022 ,
- 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
- 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
-#if 0
- 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
-#endif
- 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
- 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */
-};
-
-static u32 ff_loc = ~0;
-static u32 zero_loc = 0;
-
-static int bar_probing = 0; /* Set after a write of ~0 to a BAR */
-
-#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
-#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
-#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
-
-static u32 *hdr_addr(const u32 *hdr, int reg)
-{
- u32 addr;
-
- /*
- * This is a little bit tricky. The header maps consist of
- * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
- * In the normal case, when not probing a BAR's size, we want
- * to access the header data, so we add 0x20 to the reg offset,
- * thus skipping the size mask area.
- * In the BAR probing case, we want to access the size mask for
- * the BAR, so we subtract 0x10 (the config header offset for
- * BAR0), and don't skip the size mask area.
- */
-
- addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
-
- bar_probing = 0;
- return (u32 *)addr;
-}
-
-static int pci_olpc_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value)
-{
- u32 *addr;
-
- /* Use the hardware mechanism for non-simulated devices */
- if (!SIMULATED(bus, devfn))
- return pci_conf1_read(seg, bus, devfn, reg, len, value);
-
- /*
- * No device has config registers past 0x70, so we save table space
- * by not storing entries for the nonexistent registers
- */
- if (reg >= 0x70)
- addr = &zero_loc;
- else {
- switch (devfn) {
- case 0x8:
- addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
- break;
- case 0x9:
- addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
- break;
- case 0xa:
- addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
- break;
- case 0x78:
- addr = hdr_addr(isa_hdr, reg);
- break;
- case 0x7b:
- addr = hdr_addr(ac97_hdr, reg);
- break;
- case 0x7c:
- addr = hdr_addr(ohci_hdr, reg);
- break;
- case 0x7d:
- addr = hdr_addr(ehci_hdr, reg);
- break;
- default:
- addr = &ff_loc;
- break;
- }
- }
- switch (len) {
- case 1:
- *value = *(u8 *) addr;
- break;
- case 2:
- *value = *(u16 *) addr;
- break;
- case 4:
- *value = *addr;
- break;
- default:
- BUG();
- }
-
- return 0;
-}
-
-static int pci_olpc_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value)
-{
- /* Use the hardware mechanism for non-simulated devices */
- if (!SIMULATED(bus, devfn))
- return pci_conf1_write(seg, bus, devfn, reg, len, value);
-
- /* XXX we may want to extend this to simulate EHCI power management */
-
- /*
- * Mostly we just discard writes, but if the write is a size probe
- * (i.e. writing ~0 to a BAR), we remember it and arrange to return
- * the appropriate size mask on the next read. This is cheating
- * to some extent, because it depends on the fact that the next
- * access after such a write will always be a read to the same BAR.
- */
-
- if ((reg >= 0x10) && (reg < 0x2c)) {
- /* Write is to a BAR */
- if (value == ~0)
- bar_probing = 1;
- } else {
- /*
- * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
- * CACHE_LINE_SIZE, or PM registers.
- */
- if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
- (reg != 0x0c) && (reg != 0x44))
- printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
- }
-
- return 0;
-}
-
-static struct pci_raw_ops pci_olpc_conf = {
- .read = pci_olpc_read,
- .write = pci_olpc_write,
-};
-
-void __init pci_olpc_init(void)
-{
- if (!machine_is_olpc() || olpc_has_vsa())
- return;
-
- printk(KERN_INFO "PCI: Using configuration type OLPC\n");
- raw_pci_ops = &pci_olpc_conf;
- is_lx = is_geode_lx();
-}
diff --git a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c
deleted file mode 100644
index dc575ac062..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c
+++ /dev/null
@@ -1,554 +0,0 @@
-/*
- * OLPC touchpad PS/2 mouse driver
- *
- * Copyright (c) 2006 One Laptop Per Child, inc.
- * Authors Zephaniah E. Hull and Andres Salomon <dilinger@laptop.org>
- *
- * This driver is partly based on the ALPS driver, which is:
- *
- * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
- * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
- * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
- * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The touchpad on the OLPC is fairly wide, with the entire area usable
- * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad
- * ("GS mode").
- *
- * Earlier version of the device had simultaneous reporting; however, that
- * was removed. Instead, the device now reports packets in one mode, and
- * tells the driver when a mode switch needs to happen.
- */
-
-#include <linux/input.h>
-#include <linux/serio.h>
-#include <linux/libps2.h>
-#include <linux/delay.h>
-#include <asm/olpc.h>
-
-#include "psmouse.h"
-#include "olpc.h"
-
-static int tpdebug;
-module_param(tpdebug, int, 0644);
-
-#define OLPC_GS 1 /* The GS sensor. */
-#define OLPC_PT 2 /* The PT sensor. */
-
-static struct olpc_model_info olpc_model_data[] = {
- { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */
- { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */
- { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/
- { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */
- { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */
- { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */
-};
-
-#define OLPC_PKT_PT 0xcf
-#define OLPC_PKT_GS 0xff
-
-static int olpc_absolute_mode(struct psmouse *psmouse, int mode);
-
-/*
- * OLPC absolute Mode - single-mode format
- *
- * byte 0: 1 1 0 0 1 1 1 1
- * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
- * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw
- * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw
- * byte 3: 0 y9 y8 y7 1 0 swr swl
- * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
- * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
- *
- * ?'s are not defined in the protocol spec, may vary between models.
- *
- * swr/swl are the left/right buttons.
- *
- * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
- * pen/finger
- */
-
-static void olpc_process_packet_gspt(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- unsigned char *packet = psmouse->packet;
- struct input_dev *dev = psmouse->dev;
- struct input_dev *dev2 = priv->dev2;
- int x, y, z, gs_down = 0, pt_down = 0, left, right;
- struct timeval now_tv;
- s64 now_ns;
-
- left = packet[3] & 1;
- right = packet[3] & 2;
- x = packet[1] | ((packet[2] & 0x78) << 4);
- y = packet[4] | ((packet[3] & 0x70) << 3);
- z = packet[5];
-
- if (psmouse->packet[0] == OLPC_PKT_GS) {
- pt_down = !!(packet[2] & 1);
- gs_down = !!(packet[2] & 2);
- } else if (psmouse->packet[0] == OLPC_PKT_PT) {
- gs_down = !!(packet[2] & 1);
- pt_down = !!(packet[2] & 2);
- }
-
- /*
- * XXX: Kludge.
- * If it's been more than 30ms since the last packet,
- * assume that there was a lift we were never told about.
- */
- do_gettimeofday(&now_tv);
- now_ns = timeval_to_ns (&now_tv);
- if (now_ns >= priv->late) {
- input_report_key(dev, BTN_TOUCH, 0);
- input_report_key(dev, BTN_TOOL_PEN, 0);
- input_report_key(dev2, BTN_TOUCH, 0);
- input_report_key(dev2, BTN_TOOL_FINGER, 0);
-
- input_sync(dev);
- input_sync(dev2);
- }
-
- priv->late = now_ns + (30 * NSEC_PER_MSEC);
-
-
- if (tpdebug) {
- printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__, psmouse->packet[0], psmouse->packet[1],
- psmouse->packet[2], psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
- printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n",
- left, right, pt_down, gs_down, x, y, z);
- }
-
- if (psmouse->packet[0] == OLPC_PKT_PT) {
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- } else if (psmouse->packet[0] == OLPC_PKT_GS) {
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- }
-
- input_report_key(dev, BTN_TOUCH, pt_down);
- input_report_key(dev, BTN_TOOL_PEN, pt_down);
- input_report_key(dev2, BTN_TOUCH, gs_down);
- input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
-
- input_report_abs(dev2, ABS_PRESSURE, z);
-
- if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
- } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) {
- input_report_abs(dev2, ABS_X, x);
- input_report_abs(dev2, ABS_Y, y);
- }
-
- input_sync(dev);
- input_sync(dev2);
-
- if (priv->pending_mode == OLPC_GS &&
- psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
- priv->pending_mode = 0;
- cancel_delayed_work(&priv->mode_switch);
- }
-
- if (priv->i->flags & (OLPC_PT|OLPC_GS)) {
- int pending = 0;
- if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down)
- pending = OLPC_GS;
- else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down)
- pending = OLPC_PT;
-
- if (priv->current_mode == pending) {
- priv->pending_mode = 0;
- pending = priv->current_mode;
- }
- else if (priv->pending_mode != pending) {
- priv->pending_mode = pending;
- if (tpdebug)
- printk(KERN_WARNING "Scheduling mode switch to %s.\n",
- pending == OLPC_GS ? "GS" : "PT");
-
- /*
- * Apply a de-bounce when switching from PT to GS, to allow for
- * spurious PT-up packets.
- */
- if (priv->pending_mode == OLPC_GS)
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
- else
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0);
- }
- }
-}
-
-static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse)
-{
- psmouse_ret_t ret = PSMOUSE_BAD_DATA;
-
- if (psmouse->packet[0] != OLPC_PKT_PT &&
- psmouse->packet[0] != OLPC_PKT_GS)
- goto out;
-
- /* Bytes 2 - 6 should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
- (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
- goto out;
-
- if (psmouse->pktcnt == 6) {
- olpc_process_packet_gspt(psmouse);
- ret = PSMOUSE_FULL_PACKET;
- goto out;
- }
-
- ret = PSMOUSE_GOOD_DATA;
-out:
- if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET)
- printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__, psmouse->pktcnt, psmouse->packet[0],
- psmouse->packet[1], psmouse->packet[2],
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
- return ret;
-}
-
-static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- unsigned char param[4];
- int i;
-
- /*
- * Now try "E7 report". Allowed responses are in
- * olpc_model_data[].signature
- */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x",
- __LINE__, param[0], param[1], param[2]);
-
- for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) {
- if (!memcmp(param, olpc_model_data[i].signature,
- sizeof(olpc_model_data[i].signature))) {
- printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]);
- return olpc_model_data + i;
- }
- }
-
- /*
- * ALPS creates new IDs pretty frequently; rather than listing them
- * all, just assume they support the defaults. We've set aside the
- * first entry of olpc_model_data as the catch-all.
- */
- if (!memcmp(param, olpc_model_data[0].signature, 2)) {
- printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]);
- return &olpc_model_data[0];
- }
-
- return NULL;
-}
-
-static int olpc_find_mode(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- int mode = priv->i->flags;
-
- if (mode & OLPC_GS)
- mode = OLPC_GS;
- else if (mode & OLPC_PT)
- mode = OLPC_PT;
- else
- mode = -1;
-
- return mode;
-}
-
-/*
- * Touchpad should be disabled before calling this!
- */
-static int olpc_new_mode(struct psmouse *psmouse, int mode)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- struct olpc_data *priv = psmouse->private;
- unsigned char param;
- int ret;
-
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies);
-
- if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
- goto failed;
- if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
- goto failed;
- if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
- goto failed;
-
- switch (mode) {
- default:
- printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode);
- case OLPC_GS:
- ret = ps2_command(ps2dev, NULL, 0xE6);
- break;
- case OLPC_PT:
- ret = ps2_command(ps2dev, NULL, 0xE7);
- break;
- }
- if (ret)
- goto failed;
-
- /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
- psmouse->pktcnt = psmouse->out_of_sync = 0;
- psmouse->last = jiffies;
- psmouse->state = PSMOUSE_ACTIVATED;
-
- if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)))
- goto failed;
-
- priv->current_mode = mode;
- priv->pending_mode = 0;
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode);
-
-failed:
- if (ret)
- printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies);
- return ret;
-}
-
-static int olpc_absolute_mode(struct psmouse *psmouse, int mode)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
-
- /* Switch to 'Advanced mode.', four disables in a row. */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- return -1;
-
- return olpc_new_mode(psmouse, mode);
-}
-
-/*
- * olpc_poll() - poll the touchpad for current motion packet.
- * Used in resync.
- * Note: We can't poll, so always return failure.
- */
-static int olpc_poll(struct psmouse *psmouse)
-{
- return -1;
-}
-
-static int olpc_reconnect(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- int mode;
-
- if (olpc_rev_after(OLPC_REV_B2))
- if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
- return 0;
-
- psmouse_reset(psmouse);
-
- if (!(priv->i = olpc_get_model(psmouse)))
- return -1;
-
- mode = olpc_find_mode(psmouse);
- if (mode < 0)
- return -1;
-
- if (olpc_absolute_mode(psmouse, mode)) {
- printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n");
- return -1;
- }
-
- return 0;
-}
-
-static void olpc_disconnect(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
-
- psmouse_reset(psmouse);
- input_unregister_device(priv->dev2);
- kfree(priv);
-}
-
-static void olpc_mode_switch(struct work_struct *w)
-{
- struct delayed_work *work = container_of(w, struct delayed_work, work);
- struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch);
- struct psmouse *psmouse = priv->psmouse;
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- int pending_mode, ret;
-
- if (priv->pending_mode == priv->current_mode) {
- priv->pending_mode = 0;
- printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n");
- return;
- }
-
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies);
-
- /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
- psmouse->state = PSMOUSE_INITIALIZING;
-
- ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
- if (ret) {
- /* XXX: if this ever fails, we need to do a full reset! */
- printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies);
- return;
- }
-
- /*
- * ALPS tells us that it may take up to 20msec for the disable to
- * take effect; however, ps2_command() will wait up to 200msec for
- * the ACK to come back (and I'm assuming that by the time the
- * hardware sends back its ACK, it has stopped sending bytes).
- */
- pending_mode = priv->pending_mode;
-
- if (olpc_new_mode(psmouse, priv->pending_mode))
- goto bad;
-
- /*
- * Deal with a potential race condition.
- *
- * If there is a brief tap of a stylus or a fingernail that
- * triggers a mode switch to PT mode, and the stylus/fingernail is
- * lifted after the DISABLE above, but before we reenable in the new mode,
- * then we can get stuck in PT mode.
- */
- if (pending_mode == OLPC_PT) {
- priv->pending_mode = OLPC_GS;
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
- }
-
- return;
-
-bad:
- printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n");
- olpc_reconnect(psmouse);
-}
-
-int olpc_init(struct psmouse *psmouse)
-{
- struct olpc_data *priv;
- struct input_dev *dev = psmouse->dev;
- struct input_dev *dev2;
- int mode;
-
- priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
- dev2 = input_allocate_device();
- if (!priv || !dev2)
- goto init_fail;
-
- psmouse->private = priv;
- priv->dev2 = dev2;
- priv->psmouse = psmouse;
-
- psmouse_reset(psmouse);
- if (!(priv->i = olpc_get_model(psmouse)))
- goto init_fail;
-
- mode = olpc_find_mode(psmouse);
- if (mode < 0) {
- printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n");
- goto init_fail;
- }
-
- if (olpc_absolute_mode(psmouse, mode)) {
- printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n");
- goto init_fail;
- }
-
- /*
- * Unset some of the default bits for things we don't have.
- */
- dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL);
- dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y));
- dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE);
-
- dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
- dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-
- dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0);
- input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0);
-
- snprintf(priv->phys, sizeof(priv->phys),
- "%s/input1", psmouse->ps2dev.serio->phys);
- dev2->phys = priv->phys;
- dev2->name = "OLPC ALPS GlideSensor";
- dev2->id.bustype = BUS_I8042;
- dev2->id.vendor = 0x0002;
- dev2->id.product = PSMOUSE_OLPC;
- dev2->id.version = 0x0000;
-
- dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
- dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-
- dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0);
- input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0);
- input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
-
- if (input_register_device(dev2)) {
- printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n");
- goto init_fail;
- }
-
- psmouse->protocol_handler = olpc_process_byte;
- psmouse->poll = olpc_poll;
- psmouse->disconnect = olpc_disconnect;
- psmouse->reconnect = olpc_reconnect;
- psmouse->pktsize = 6;
-
- /* Disable the idle resync. */
- psmouse->resync_time = 0;
- /* Reset after a lot of bad bytes. */
- psmouse->resetafter = 1024;
-
- INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch);
-
- return 0;
-
-init_fail:
- input_free_device(dev2);
- kfree(priv);
- return -1;
-}
-
-int olpc_detect(struct psmouse *psmouse, int set_properties)
-{
- if (!olpc_get_model(psmouse))
- return -1;
-
- if (set_properties) {
- psmouse->vendor = "ALPS";
- psmouse->name = "PenTablet";
- psmouse->model = 0;
- }
- return 0;
-}
-
diff --git a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h
deleted file mode 100644
index 426f8b4ea9..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * OLPC touchpad PS/2 mouse driver
- *
- * Copyright (c) 2006 One Laptop Per Child, inc.
- *
- * This driver is partly based on the ALPS driver.
- * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
- * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _OLPC_H
-#define _OLPC_H
-
-struct olpc_model_info {
- unsigned char signature[3];
- unsigned char flags;
-};
-
-struct olpc_data {
- struct input_dev *dev2; /* Relative device */
- struct psmouse *psmouse;
- char name[32]; /* Name */
- char phys[32]; /* Phys */
- struct olpc_model_info *i; /* Info */
- int pending_mode;
- int current_mode;
- s64 late;
- struct delayed_work mode_switch;
-};
-
-#ifdef CONFIG_MOUSE_PS2_OLPC
-int olpc_detect(struct psmouse *psmouse, int set_properties);
-int olpc_init(struct psmouse *psmouse);
-#else
-inline int olpc_detect(struct psmouse *psmouse, int set_properties)
-{
- return -ENOSYS;
-}
-inline int olpc_init(struct psmouse *psmouse)
-{
- return -ENOSYS;
-}
-#endif
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h
deleted file mode 100644
index a33251f4b8..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* linux/drivers/mtd/mtdcore.h
- *
- * Header file for driver private mtdcore exports
- *
- */
-
-/* These are exported solely for the purpose of mtd_blkdevs.c. You
- should not use them for _anything_ else */
-
-extern struct mutex mtd_table_mutex;
-extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c
deleted file mode 100644
index cfc28ab4a3..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * MTD Oops/Panic logger
- *
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/vmalloc.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/mtd/mtd.h>
-
-#define OOPS_PAGE_SIZE 4096
-
-static struct mtdoops_context {
- int mtd_index;
- struct work_struct work;
- struct mtd_info *mtd;
- int oops_pages;
- int nextpage;
- int nextcount;
-
- void *oops_buf;
- int ready;
- int writecount;
-} oops_cxt;
-
-static void mtdoops_erase_callback(struct erase_info *done)
-{
- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
- wake_up(wait_q);
-}
-
-static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
-{
- struct erase_info erase;
- DECLARE_WAITQUEUE(wait, current);
- wait_queue_head_t wait_q;
- int ret;
-
- init_waitqueue_head(&wait_q);
- erase.mtd = mtd;
- erase.callback = mtdoops_erase_callback;
- erase.addr = offset;
- if (mtd->erasesize < OOPS_PAGE_SIZE)
- erase.len = OOPS_PAGE_SIZE;
- else
- erase.len = mtd->erasesize;
- erase.priv = (u_long)&wait_q;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&wait_q, &wait);
-
- ret = mtd->erase(mtd, &erase);
- if (ret) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_q, &wait);
- printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
- "on \"%s\" failed\n",
- erase.addr, erase.len, mtd->name);
- return ret;
- }
-
- schedule(); /* Wait for erase to finish. */
- remove_wait_queue(&wait_q, &wait);
-
- return 0;
-}
-
-static int mtdoops_inc_counter(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- size_t retlen;
- u32 count;
- int ret;
-
- cxt->nextpage++;
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- cxt->nextcount++;
- if (cxt->nextcount == 0xffffffff)
- cxt->nextcount = 0;
-
- ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
- &retlen, (u_char *) &count);
- if ((retlen != 4) || (ret < 0)) {
- printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)"
- ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
- retlen, ret);
- return 1;
- }
-
- /* See if we need to erase the next block */
- if (count != 0xffffffff)
- return 1;
-
- printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
- cxt->nextpage, cxt->nextcount);
- cxt->ready = 1;
- return 0;
-}
-
-static void mtdoops_prepare(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- int i = 0, j, ret, mod;
-
- /* We were unregistered */
- if (!mtd)
- return;
-
- mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
- if (mod != 0) {
- cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- }
-
- while (mtd->block_isbad &&
- mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
-badblock:
- printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
- cxt->nextpage * OOPS_PAGE_SIZE);
- i++;
- cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
- printk(KERN_ERR "mtdoops: All blocks bad!\n");
- return;
- }
- }
-
- for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
- ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
-
- if (ret < 0) {
- if (mtd->block_markbad)
- mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
- goto badblock;
- }
-
- printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
-
- cxt->ready = 1;
-}
-
-static void mtdoops_workfunc(struct work_struct *work)
-{
- struct mtdoops_context *cxt =
- container_of(work, struct mtdoops_context, work);
-
- mtdoops_prepare(cxt);
-}
-
-static int find_next_position(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- int page, maxpos = 0;
- u32 count, maxcount = 0xffffffff;
- size_t retlen;
-
- for (page = 0; page < cxt->oops_pages; page++) {
- mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
- if (count == 0xffffffff)
- continue;
- if (maxcount == 0xffffffff) {
- maxcount = count;
- maxpos = page;
- } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
- maxcount = count;
- maxpos = page;
- } else if ((count > maxcount) && (count < 0xc0000000)) {
- maxcount = count;
- maxpos = page;
- } else if ((count > maxcount) && (count > 0xc0000000)
- && (maxcount > 0x80000000)) {
- maxcount = count;
- maxpos = page;
- }
- }
- if (maxcount == 0xffffffff) {
- cxt->nextpage = 0;
- cxt->nextcount = 1;
- cxt->ready = 1;
- printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
- cxt->nextpage, cxt->nextcount);
- return 0;
- }
-
- cxt->nextpage = maxpos;
- cxt->nextcount = maxcount;
-
- return mtdoops_inc_counter(cxt);
-}
-
-
-static void mtdoops_notify_add(struct mtd_info *mtd)
-{
- struct mtdoops_context *cxt = &oops_cxt;
- int ret;
-
- if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
- return;
-
- if (mtd->size < (mtd->erasesize * 2)) {
- printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
- mtd->index);
- return;
- }
-
- cxt->mtd = mtd;
- cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
-
- ret = find_next_position(cxt);
- if (ret == 1)
- mtdoops_prepare(cxt);
-
- printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
-}
-
-static void mtdoops_notify_remove(struct mtd_info *mtd)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
- return;
-
- cxt->mtd = NULL;
- flush_scheduled_work();
-}
-
-
-static void
-mtdoops_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct mtdoops_context *cxt = co->data;
- struct mtd_info *mtd = cxt->mtd;
- int i, ret;
-
- if (!cxt->ready || !mtd)
- return;
-
- if (!oops_in_progress && cxt->writecount != 0) {
- size_t retlen;
- if (cxt->writecount < OOPS_PAGE_SIZE)
- memset(cxt->oops_buf + cxt->writecount, 0xff,
- OOPS_PAGE_SIZE - cxt->writecount);
-
- ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
- OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
- cxt->ready = 0;
- cxt->writecount = 0;
-
- if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
- printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d"
- " written), err %d.\n",
- cxt->nextpage * OOPS_PAGE_SIZE, retlen,
- OOPS_PAGE_SIZE, ret);
-
- ret = mtdoops_inc_counter(cxt);
- if (ret == 1)
- schedule_work(&cxt->work);
- }
-
- if (!oops_in_progress)
- return;
-
- if (cxt->writecount == 0) {
- u32 *stamp = cxt->oops_buf;
- *stamp = cxt->nextcount;
- cxt->writecount = 4;
- }
-
- if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
- count = OOPS_PAGE_SIZE - cxt->writecount;
-
- for (i = 0; i < count; i++, s++)
- *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
-
- cxt->writecount = cxt->writecount + count;
-}
-
-static int __init mtdoops_console_setup(struct console *co, char *options)
-{
- struct mtdoops_context *cxt = co->data;
-
- if (cxt->mtd_index != -1)
- return -EBUSY;
- if (co->index == -1)
- return -EINVAL;
-
- cxt->mtd_index = co->index;
- return 0;
-}
-
-static struct mtd_notifier mtdoops_notifier = {
- .add = mtdoops_notify_add,
- .remove = mtdoops_notify_remove,
-};
-
-static struct console mtdoops_console = {
- .name = "ttyMTD",
- .write = mtdoops_console_write,
- .setup = mtdoops_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &oops_cxt,
-};
-
-static int __init mtdoops_console_init(void)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- cxt->mtd_index = -1;
- cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
-
- if (!cxt->oops_buf) {
- printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
- return -ENOMEM;
- }
-
- INIT_WORK(&cxt->work, mtdoops_workfunc);
-
- register_console(&mtdoops_console);
- register_mtd_user(&mtdoops_notifier);
- return 0;
-}
-
-static void __exit mtdoops_console_exit(void)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- unregister_mtd_user(&mtdoops_notifier);
- unregister_console(&mtdoops_console);
- vfree(cxt->oops_buf);
-}
-
-
-subsys_initcall(mtdoops_console_init);
-module_exit(mtdoops_console_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c b/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c
deleted file mode 100644
index b80667309b..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- * linux/drivers/mtd/onenand/onenand_sim.c
- *
- * The OneNAND simulator
- *
- * Copyright © 2005-2007 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <linux/io.h>
-
-#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
-#endif
-#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
-#endif
-#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
-#endif
-
-static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
-static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
-static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
-
-struct onenand_flash {
- void __iomem *base;
- void __iomem *data;
-};
-
-#define ONENAND_CORE(flash) (flash->data)
-#define ONENAND_CORE_SPARE(flash, this, offset) \
- ((flash->data) + (this->chipsize) + (offset >> 5))
-
-#define ONENAND_MAIN_AREA(this, offset) \
- (this->base + ONENAND_DATARAM + offset)
-
-#define ONENAND_SPARE_AREA(this, offset) \
- (this->base + ONENAND_SPARERAM + offset)
-
-#define ONENAND_GET_WP_STATUS(this) \
- (readw(this->base + ONENAND_REG_WP_STATUS))
-
-#define ONENAND_SET_WP_STATUS(v, this) \
- (writew(v, this->base + ONENAND_REG_WP_STATUS))
-
-/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE (2048 + 64)
-static unsigned char *ffchars;
-
-static struct mtd_partition os_partitions[] = {
- {
- .name = "OneNAND simulator partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/*
- * OneNAND simulator mtd
- */
-struct onenand_info {
- struct mtd_info mtd;
- struct mtd_partition *parts;
- struct onenand_chip onenand;
- struct onenand_flash flash;
-};
-
-struct onenand_info *info;
-
-#define DPRINTK(format, args...) \
-do { \
- printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
- __LINE__, ##args); \
-} while (0)
-
-/**
- * onenand_lock_handle - Handle Lock scheme
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Send lock command to OneNAND device.
- * The lock scheme is depends on chip type.
- */
-static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-{
- int block_lock_scheme;
- int status;
-
- status = ONENAND_GET_WP_STATUS(this);
- block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
- break;
-
- case ONENAND_CMD_LOCK:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
- break;
-
- case ONENAND_CMD_LOCK_TIGHT:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_bootram_handle - Handle BootRAM area
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
- */
-static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-{
- switch (cmd) {
- case ONENAND_CMD_READID:
- writew(manuf_id, this->base);
- writew(device_id, this->base + 2);
- writew(version_id, this->base + 4);
- break;
-
- default:
- /* REVIST: Handle other commands */
- break;
- }
-}
-
-/**
- * onenand_update_interrupt - Set interrupt register
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Update interrupt register. The status is depends on command.
- */
-static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-{
- int interrupt = ONENAND_INT_MASTER;
-
- switch (cmd) {
- case ONENAND_CMD_READ:
- case ONENAND_CMD_READOOB:
- interrupt |= ONENAND_INT_READ;
- break;
-
- case ONENAND_CMD_PROG:
- case ONENAND_CMD_PROGOOB:
- interrupt |= ONENAND_INT_WRITE;
- break;
-
- case ONENAND_CMD_ERASE:
- interrupt |= ONENAND_INT_ERASE;
- break;
-
- case ONENAND_CMD_RESET:
- interrupt |= ONENAND_INT_RESET;
- break;
-
- default:
- break;
- }
-
- writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-}
-
-/**
- * onenand_check_overwrite - Check over-write if happend
- * @param dest The destination pointer
- * @param src The source pointer
- * @param count The length to be check
- * @return 0 on same, otherwise 1
- *
- * Compare the source with destination
- */
-static int onenand_check_overwrite(void *dest, void *src, size_t count)
-{
- unsigned int *s = (unsigned int *) src;
- unsigned int *d = (unsigned int *) dest;
- int i;
-
- count >>= 2;
- for (i = 0; i < count; i++)
- if ((*s++ ^ *d++) != 0)
- return 1;
-
- return 0;
-}
-
-/**
- * onenand_data_handle - Handle OneNAND Core and DataRAM
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- * @param dataram Which dataram used
- * @param offset The offset to OneNAND Core
- *
- * Copy data from OneNAND Core to DataRAM (read)
- * Copy data from DataRAM to OneNAND Core (write)
- * Erase the OneNAND Core (erase)
- */
-static void onenand_data_handle(struct onenand_chip *this, int cmd,
- int dataram, unsigned int offset)
-{
- struct mtd_info *mtd = &info->mtd;
- struct onenand_flash *flash = this->priv;
- int main_offset, spare_offset;
- void __iomem *src;
- void __iomem *dest;
- unsigned int i;
-
- if (dataram) {
- main_offset = mtd->writesize;
- spare_offset = mtd->oobsize;
- } else {
- main_offset = 0;
- spare_offset = 0;
- }
-
- switch (cmd) {
- case ONENAND_CMD_READ:
- src = ONENAND_CORE(flash) + offset;
- dest = ONENAND_MAIN_AREA(this, main_offset);
- memcpy(dest, src, mtd->writesize);
- /* Fall through */
-
- case ONENAND_CMD_READOOB:
- src = ONENAND_CORE_SPARE(flash, this, offset);
- dest = ONENAND_SPARE_AREA(this, spare_offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_PROG:
- src = ONENAND_MAIN_AREA(this, main_offset);
- dest = ONENAND_CORE(flash) + offset;
- /* To handle partial write */
- for (i = 0; i < (1 << mtd->subpage_sft); i++) {
- int off = i * this->subpagesize;
- if (!memcmp(src + off, ffchars, this->subpagesize))
- continue;
- if (memcmp(dest + off, ffchars, this->subpagesize) &&
- onenand_check_overwrite(dest + off, src + off, this->subpagesize))
- printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
- memcpy(dest + off, src + off, this->subpagesize);
- }
- /* Fall through */
-
- case ONENAND_CMD_PROGOOB:
- src = ONENAND_SPARE_AREA(this, spare_offset);
- /* Check all data is 0xff chars */
- if (!memcmp(src, ffchars, mtd->oobsize))
- break;
-
- dest = ONENAND_CORE_SPARE(flash, this, offset);
- if (memcmp(dest, ffchars, mtd->oobsize) &&
- onenand_check_overwrite(dest, src, mtd->oobsize))
- printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
- offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_ERASE:
- memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
- memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
- (mtd->erasesize >> 5));
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_command_handle - Handle command
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Emulate OneNAND command.
- */
-static void onenand_command_handle(struct onenand_chip *this, int cmd)
-{
- unsigned long offset = 0;
- int block = -1, page = -1, bufferram = -1;
- int dataram = 0;
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- case ONENAND_CMD_LOCK:
- case ONENAND_CMD_LOCK_TIGHT:
- case ONENAND_CMD_UNLOCK_ALL:
- onenand_lock_handle(this, cmd);
- break;
-
- case ONENAND_CMD_BUFFERRAM:
- /* Do nothing */
- return;
-
- default:
- block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
- if (block & (1 << ONENAND_DDP_SHIFT)) {
- block &= ~(1 << ONENAND_DDP_SHIFT);
- /* The half of chip block */
- block += this->chipsize >> (this->erase_shift + 1);
- }
- if (cmd == ONENAND_CMD_ERASE)
- break;
-
- page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
- page = (page >> ONENAND_FPA_SHIFT);
- bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
- bufferram >>= ONENAND_BSA_SHIFT;
- bufferram &= ONENAND_BSA_DATARAM1;
- dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
- break;
- }
-
- if (block != -1)
- offset += block << this->erase_shift;
-
- if (page != -1)
- offset += page << this->page_shift;
-
- onenand_data_handle(this, cmd, dataram, offset);
-
- onenand_update_interrupt(this, cmd);
-}
-
-/**
- * onenand_writew - [OneNAND Interface] Emulate write operation
- * @param value value to write
- * @param addr address to write
- *
- * Write OneNAND register with value
- */
-static void onenand_writew(unsigned short value, void __iomem * addr)
-{
- struct onenand_chip *this = info->mtd.priv;
-
- /* BootRAM handling */
- if (addr < this->base + ONENAND_DATARAM) {
- onenand_bootram_handle(this, value);
- return;
- }
- /* Command handling */
- if (addr == this->base + ONENAND_REG_COMMAND)
- onenand_command_handle(this, value);
-
- writew(value, addr);
-}
-
-/**
- * flash_init - Initialize OneNAND simulator
- * @param flash OneNAND simulaotr data strucutres
- *
- * Initialize OneNAND simulator.
- */
-static int __init flash_init(struct onenand_flash *flash)
-{
- int density, size;
- int buffer_size;
-
- flash->base = kzalloc(131072, GFP_KERNEL);
- if (!flash->base) {
- printk(KERN_ERR "Unable to allocate base address.\n");
- return -ENOMEM;
- }
-
- density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
- size = ((16 << 20) << density);
-
- ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
- if (!ONENAND_CORE(flash)) {
- printk(KERN_ERR "Unable to allocate nand core address.\n");
- kfree(flash->base);
- return -ENOMEM;
- }
-
- memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-
- /* Setup registers */
- writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
- writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
- writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
-
- if (density < 2)
- buffer_size = 0x0400; /* 1KiB page */
- else
- buffer_size = 0x0800; /* 2KiB page */
- writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-
- return 0;
-}
-
-/**
- * flash_exit - Clean up OneNAND simulator
- * @param flash OneNAND simulaotr data strucutres
- *
- * Clean up OneNAND simulator.
- */
-static void flash_exit(struct onenand_flash *flash)
-{
- vfree(ONENAND_CORE(flash));
- kfree(flash->base);
- kfree(flash);
-}
-
-static int __init onenand_sim_init(void)
-{
- /* Allocate all 0xff chars pointer */
- ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
- if (!ffchars) {
- printk(KERN_ERR "Unable to allocate ff chars.\n");
- return -ENOMEM;
- }
- memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-
- /* Allocate OneNAND simulator mtd pointer */
- info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
- if (!info) {
- printk(KERN_ERR "Unable to allocate core structures.\n");
- kfree(ffchars);
- return -ENOMEM;
- }
-
- /* Override write_word function */
- info->onenand.write_word = onenand_writew;
-
- if (flash_init(&info->flash)) {
- printk(KERN_ERR "Unable to allocat flash.\n");
- kfree(ffchars);
- kfree(info);
- return -ENOMEM;
- }
-
- info->parts = os_partitions;
-
- info->onenand.base = info->flash.base;
- info->onenand.priv = &info->flash;
-
- info->mtd.name = "OneNAND simulator";
- info->mtd.priv = &info->onenand;
- info->mtd.owner = THIS_MODULE;
-
- if (onenand_scan(&info->mtd, 1)) {
- flash_exit(&info->flash);
- kfree(ffchars);
- kfree(info);
- return -ENXIO;
- }
-
- add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
-
- return 0;
-}
-
-static void __exit onenand_sim_exit(void)
-{
- struct onenand_chip *this = info->mtd.priv;
- struct onenand_flash *flash = this->priv;
-
- onenand_release(&info->mtd);
- flash_exit(flash);
- kfree(ffchars);
- kfree(info);
-}
-
-module_init(onenand_sim_init);
-module_exit(onenand_sim_exit);
-
-MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
-MODULE_DESCRIPTION("The OneNAND flash simulator");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h b/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h
deleted file mode 100644
index 9e75505a88..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* This header file defines the registers and suspend/resume
- structures for the Geode GX and LX. The lxfb driver defines
- _GEODELX_ before including this file, which will unlock the
- extra registers that are only valid for LX.
-*/
-
-#ifndef _GEODE_REGS_H_
-#define _GEODE_REGS_H_
-
-/* MSRs */
-
-#define GX_VP_MSR_PAD_SELECT 0xC0002011
-#define LX_VP_MSR_PAD_SELECT 0x48000011
-
-#define GEODE_MSR_GLCP_DOTPLL 0x4c000015
-
-#define GLCP_DOTPLL_RESET (1 << 0)
-#define GLCP_DOTPLL_BYPASS (1 << 15)
-#define GLCP_DOTPLL_HALFPIX (1 << 24)
-#define GLCP_DOTPLL_LOCK (1 << 25)
-
-/* Registers */
-#define VP_FP_START 0x400
-
-
-#ifdef _GEODELX_
-
-#define GP_REG_SIZE 0x7C
-#define DC_REG_SIZE 0xF0
-#define VP_REG_SIZE 0x158
-#define FP_REG_SIZE 0x70
-
-#else
-
-#define GP_REG_SIZE 0x50
-#define DC_REG_SIZE 0x90
-#define VP_REG_SIZE 0x138
-#define FP_REG_SIZE 0x70
-
-#endif
-
-#define DC_PAL_SIZE 0x105
-
-struct geoderegs {
-
- struct {
- u64 padsel;
- u64 dotpll;
-
-#ifdef _GEODELX_
- u64 dfglcfg;
- u64 dcspare;
-#else
- u64 rstpll;
-#endif
- } msr;
-
- union {
- unsigned char b[GP_REG_SIZE];
- struct {
- u32 dst_offset; /* 0x00 */
- u32 src_offset; /* 0x04 */
- u32 stride; /* 0x08 */
- u32 wid_height; /* 0x0C */
- u32 src_color_fg; /* 0x10 */
- u32 src_color_bg; /* 0x14 */
- u32 pat_color_0; /* 0x18 */
- u32 pat_color_1; /* 0x1C */
- u32 pat_color_2; /* 0x20 */
- u32 pat_color_3; /* 0x24 */
- u32 pat_color_4; /* 0x28 */
- u32 pat_color_5; /* 0x2C */
- u32 pat_data_0; /* 0x30 */
- u32 pat_data_1; /* 0x34 */
- u32 raster_mode; /* 0x38 */
- u32 vector_mode; /* 0x3C */
- u32 blt_mode; /* 0x40 */
- u32 blit_status; /* 0x4C */
- u32 hst_src; /* 0x48 */
- u32 base_offset; /* 0x4C */
-
-#ifdef _GEODELX_
- u32 cmd_top; /* 0x50 */
- u32 cmd_bot; /* 0x54 */
- u32 cmd_read; /* 0x58 */
- u32 cmd_write; /* 0x5C */
- u32 ch3_offset; /* 0x60 */
- u32 ch3_mode_str; /* 0x64 */
- u32 ch3_width; /* 0x68 */
- u32 ch3_hsrc; /* 0x6C */
- u32 lut_index; /* 0x70 */
- u32 lut_data; /* 0x74 */
- u32 int_cntrl; /* 0x78 */
-#endif
- } r;
- } gp;
-
- union {
- unsigned char b[DC_REG_SIZE];
-
- struct {
- u32 unlock; /* 0x00 */
- u32 gcfg; /* 0x04 */
- u32 dcfg; /* 0x08 */
- u32 arb; /* 0x0C */
- u32 fb_st_offset; /* 0x10 */
- u32 cb_st_offset; /* 0x14 */
- u32 curs_st_offset; /* 0x18 */
- u32 icon_st_offset; /* 0x1C */
- u32 vid_y_st_offset; /* 0x20 */
- u32 vid_u_st_offset; /* 0x24 */
- u32 vid_v_st_offset; /* 0x28 */
- u32 dctop; /* 0x2c */
- u32 line_size; /* 0x30 */
- u32 gfx_pitch; /* 0x34 */
- u32 vid_yuv_pitch; /* 0x38 */
- u32 rsvd2; /* 0x3C */
- u32 h_active_timing; /* 0x40 */
- u32 h_blank_timing; /* 0x44 */
- u32 h_sync_timing; /* 0x48 */
- u32 rsvd3; /* 0x4C */
- u32 v_active_timing; /* 0x50 */
- u32 v_blank_timing; /* 0x54 */
- u32 v_sync_timing; /* 0x58 */
- u32 fbactive; /* 0x5C */
- u32 dc_cursor_x; /* 0x60 */
- u32 dc_cursor_y; /* 0x64 */
- u32 dc_icon_x; /* 0x68 */
- u32 dc_line_cnt; /* 0x6C */
- u32 rsvd5; /* 0x70 - palette address */
- u32 rsvd6; /* 0x74 - palette data */
- u32 dfifo_diag; /* 0x78 */
- u32 cfifo_diag; /* 0x7C */
- u32 dc_vid_ds_delta; /* 0x80 */
- u32 gliu0_mem_offset; /* 0x84 */
- u32 dv_ctl; /* 0x88 - added by LX */
- u32 dv_acc; /* 0x8C */
-
-#ifdef _GEODELX_
- u32 gfx_scale;
- u32 irq_filt_ctl;
- u32 filt_coeff1;
- u32 filt_coeff2;
- u32 vbi_event_ctl;
- u32 vbi_odd_ctl;
- u32 vbi_hor;
- u32 vbi_ln_odd;
- u32 vbi_ln_event;
- u32 vbi_pitch;
- u32 clr_key;
- u32 clr_key_mask;
- u32 clr_key_x;
- u32 clr_key_y;
- u32 irq;
- u32 rsvd8;
- u32 genlk_ctrl;
- u32 vid_even_y_st_offset; /* 0xD8 */
- u32 vid_even_u_st_offset; /* 0xDC */
- u32 vid_even_v_st_offset; /* 0xE0 */
- u32 v_active_even_timing; /* 0xE4 */
- u32 v_blank_even_timing; /* 0xE8 */
- u32 v_sync_even_timing; /* 0xEC */
-#endif
- } r;
- } dc;
-
- union {
- unsigned char b[VP_REG_SIZE];
-
- struct {
- u64 vcfg; /* 0x00 */
- u64 dcfg; /* 0x08 */
- u64 vx; /* 0x10 */
- u64 vy; /* 0x18 */
- u64 vs; /* 0x20 */
- u64 vck; /* 0x28 */
- u64 vcm; /* 0x30 */
- u64 rsvd1; /* 0x38 - Gamma address*/
- u64 rsvd2; /* 0x40 - Gamma data*/
- u64 rsvd3; /* 0x48 */
- u64 misc; /* 0x50 */
- u64 ccs; /* 0x58 */
- u64 rsvd4[3]; /* 0x60-0x70 */
- u64 vdc; /* 0x78 */
- u64 vco; /* 0x80 */
- u64 crc; /* 0x88 */
- u64 crc32; /* 0x90 */
- u64 vde; /* 0x98 */
- u64 cck; /* 0xA0 */
- u64 ccm; /* 0xA8 */
- u64 cc1; /* 0xB0 */
- u64 cc2; /* 0xB8 */
- u64 a1x; /* 0xC0 */
- u64 a1y; /* 0xC8 */
- u64 a1c; /* 0xD0 */
- u64 a1t; /* 0xD8 */
- u64 a2x; /* 0xE0 */
- u64 a2y; /* 0xE8 */
- u64 a2c; /* 0xF0 */
- u64 a2t; /* 0xF8 */
- u64 a3x; /* 0x100 */
- u64 a3y; /* 0x108 */
- u64 a3c; /* 0x110 */
- u64 a3t; /* 0x118 */
- u64 vrr; /* 0x120 */
- u64 awt; /* 0x128 */
- u64 vtm; /* 0x130 */
-#ifdef _GEODELX_
- u64 vye; /* 0x138 */
- u64 a1ye; /* 0x140 */
- u32 a2ye; /* 0x148 */
- u32 a3ye; /* 0x150 */
-#endif
- } r;
- } vp;
-
- union {
- unsigned char b[FP_REG_SIZE];
-
- struct {
- u64 pt1; /* 0x400 */
- u64 pt2; /* 0x408 */
- u64 pm; /* 0x410 */
- u64 dfc; /* 0x418 */
- u64 blfsr; /* 0x420 */
- u64 rlfsr; /* 0x428 */
- u64 fmi; /* 0x430 */
- u64 fmd; /* 0x438 */
- u64 rsvd; /* 0x440 */
- u64 dca; /* 0x448 */
- u64 dmd; /* 0x450 */
- u64 crc; /* 0x458 */
- u64 fbb; /* 0x460 */
- u64 crc32; /* 0x468 */
- } r;
- } fp;
-
- u32 pal[DC_PAL_SIZE];
- u32 gamma[256];
-};
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c b/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c
deleted file mode 100644
index 43c25bea5a..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c
+++ /dev/null
@@ -1,272 +0,0 @@
-#include <linux/fb.h>
-#include <asm/io.h>
-#include <asm/msr.h>
-
-#include "geodefb.h"
-#include "video_gx.h"
-
-void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
-{
- int timeout = 1000;
-
- u64 rstpll, dotpll;
-
- rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- dotpll &= 0x00000000ffffffffull;
- dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
-
- dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
- dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
-
- wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- rstpll |= (regs->msr.rstpll &
- ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 |
- MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
- MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
-
- wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
- dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
- wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- do {
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
- } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
-}
-
-/* FIXME: Make sure nothing is read to clear */
-
-void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
-{
- struct geodefb_par *par = info->par;
- int i;
-
- /* Wait for the BLT engine to stop being busy */
- while(readl(par->gp_regs + 0x44) & 0x05);
-
- rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
- rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
- rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
-
- writel(0x4758, par->dc_regs + 0x00);
-
- memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
- memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
- memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
- memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
-
- /* Save the palettes */
- writel(0, par->dc_regs + 0x70);
-
- for(i = 0; i < DC_PAL_SIZE; i++)
- regs->pal[i] = readl(par->dc_regs + 0x74);
-
- writel(0, par->vid_regs + 0x38);
-
- for(i = 0; i < 0xFF; i++)
- regs->gamma[i] = readl(par->vid_regs + 0x40);
-}
-
-void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
-{
- struct geodefb_par *par = info->par;
- u32 val, i;
-
- /* DOTPLL */
- gx_set_dotpll(info, regs);
-
- /* GP */
-
- writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
- writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
- writel(regs->gp.r.stride, par->gp_regs + 0x08);
- writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
- writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
- writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
- writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
- writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
- writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
- writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
- writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
- writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
- writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
- writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
-
- /* Don't write the raster / vector / blt mode regs */
- /* status register is read only */
-
- writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
- writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
-
- /* DC */
-
- /* Write the unlock value */
- writel(0x4758, par->dc_regs + 0x00);
-
- writel(0, par->dc_regs + 0x70);
-
- for(i = 0; i < DC_PAL_SIZE; i++)
- writel(regs->pal[i], par->dc_regs + 0x74);
-
- /* Write the gcfg register without the enables */
- writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
-
- /* Write the vcfg register without the enables */
- writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
-
- /* Write the rest of the active registers */
-
- writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
- writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
- writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
- writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
- writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
- writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
- writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
- writel(regs->dc.r.line_size, par->dc_regs + 0x30);
- writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
- writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
- writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
- writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
- writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
- writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
- writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
- writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
- writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
- writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
- writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
-
- /* Don't write the line_cnt or diag registers */
-
- writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
- writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
- writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
-
- /* VP */
-
- /* MSR */
- wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
-
- writel(0, par->vid_regs + 0x38);
-
- for(i = 0; i < 0xFF; i++)
- writel((u32) regs->gamma[i], par->vid_regs + 0x40);
-
- /* Don't enable video yet */
- writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
-
- /* Don't enable the CRT yet */
- writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
-
- /* Write the rest of the VP registers */
-
- writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
- writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
- writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
- writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
- writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
- writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
- writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
- writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
- writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
- writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
- writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
- writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
- writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
- writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
- writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
- writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
- writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
- writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
- writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
- writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
- writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
- writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
- writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
- writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
- writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
- writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
- writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
- writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
-
-
- /* FP registers */
-
- writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
- writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
-
- writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
- writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
- writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
- writel(regs->fp.r.fmi, par->vid_regs + 0x430);
- writel(regs->fp.r.fmd, par->vid_regs + 0x438);
- writel(regs->fp.r.dca, par->vid_regs + 0x448);
- writel(regs->fp.r.dmd, par->vid_regs + 0x450);
- writel(regs->fp.r.crc, par->vid_regs + 0x458);
- writel(regs->fp.r.fbb, par->vid_regs + 0x460);
-
- /* Final enables */
-
- val = readl(par->vid_regs + 0x410);
-
- /* Control the panel */
- if (regs->fp.r.pm & (1 << 24)) {
-
- if (!(val & 0x09))
- writel(regs->fp.r.pm, par->vid_regs + 0x410);
- }
- else {
- if (!(val & 0x05))
- writel(regs->fp.r.pm, par->vid_regs + 0x410);
- }
-
- /* Turn everything on */
-
- writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
- writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
- writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
- writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
-}
-
-
-#ifdef DEBUG
-
-void dump_regs(struct fb_info *info, int mode) {
-
- struct geodefb_par *par = info->par;
- u32 val;
- int i;
-
- if (mode == 0) {
- for(i = 0; i < GP_REG_SIZE; i += 4) {
- val = readl(par->gp_regs + i);
- }
- }
-
- if (mode == 1) {
- writel(0x4758, par->dc_regs + 0x00);
-
- for(i = 0; i < DC_REG_SIZE; i += 4) {
- val = readl(par->dc_regs + i);
- printk("DC%x: %x\n", i, val);
- }
- }
-
- if (mode == 2) {
- for(i = 0; i < VP_REG_SIZE; i += 8) {
- val = readl(par->vid_regs + i);
- printk("VP%x: %x\n", i, val);
- }
- }
-
- if (mode == 3) {
- for(i = 0; i < FP_REG_SIZE; i += 8) {
- val = readl(par->vid_regs + 0x400 + i);
- printk("FP%x: %x\n", i, val);
- }
- }
-}
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c
deleted file mode 100644
index d4ef138676..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c
+++ /dev/null
@@ -1,824 +0,0 @@
-/*
- * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
- *
- * Copyright © 2006-2007 Red Hat, Inc.
- * Copyright © 2006-2007 Advanced Micro Devices, Inc.
- *
- * This program is free software. You can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-id.h>
-#include <linux/pci.h>
-#include <linux/vt_kern.h>
-#include <linux/pci_ids.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/backlight.h>
-#include <linux/device.h>
-#include <asm/uaccess.h>
-#include <linux/ctype.h>
-#include <linux/reboot.h>
-#include <asm/tsc.h>
-#include <asm/olpc.h>
-
-#include "olpc_dcon.h"
-
-/* Module definitions */
-
-static int resumeline = 898;
-module_param(resumeline, int, 0444);
-
-static int noinit;
-module_param(noinit, int, 0444);
-
-/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
-static int useaa = 1;
-module_param(useaa, int, 0444);
-
-/* I2C structures */
-
-static struct i2c_driver dcon_driver;
-static struct i2c_client *dcon_client;
-
-/* Platform devices */
-static struct platform_device *dcon_device;
-
-/* Backlight device */
-static struct backlight_device *dcon_bl_dev;
-
-/* Base address of the GPIO registers */
-static unsigned long gpio_base;
-
-static struct fb_info *fbinfo;
-
-/* Current source, initialized at probe time */
-static int dcon_source;
-
-/* Desired source */
-static int dcon_pending;
-
-/* Current output type */
-static int dcon_output = DCON_OUTPUT_COLOR;
-
-/* Current sleep status (not yet implemented) */
-static int dcon_sleep_val = DCON_ACTIVE;
-
-/* Shadow register for the DCON_REG_MODE register */
-static unsigned short dcon_disp_mode;
-
-/* Variables used during switches */
-static int dcon_switched;
-
-static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
-
-static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
-#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
-
-/* The current backlight value - this saves us some smbus traffic */
-static int bl_val = -1;
-
-/* ===== API functions - these are called by a variety of users ==== */
-
-/* Backlight notes - turning off the backlight enable bit in the DCON
- * doesn't save us any power over just pushing the BL to zero, so we
- * don't use that bit in this code.
- */
-
-static int dcon_get_backlight(void)
-{
- if (dcon_client == NULL)
- return 0;
-
- if (bl_val == -1)
- bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
-
- return bl_val;
-}
-
-static void dcon_set_backlight(int level)
-{
- if (dcon_client == NULL)
- return;
-
- if (bl_val == (level & 0x0F))
- return;
-
- bl_val = level & 0x0F;
- dcon_write(DCON_REG_BRIGHT, bl_val);
-
- /* Purposely turn off the backlight when we go to level 0 */
-
- if (bl_val == 0) {
- dcon_disp_mode &= ~MODE_BL_ENABLE;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- }
- else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
- dcon_disp_mode |= MODE_BL_ENABLE;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- }
-}
-
-/* Set the output type to either color or mono */
-
-static int dcon_set_output(int arg)
-{
- if (dcon_output == arg)
- return 0;
-
- dcon_output = arg;
-
- if (arg == DCON_OUTPUT_MONO) {
- dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
- dcon_disp_mode |= MODE_MONO_LUMA;
- }
- else {
- dcon_disp_mode &= ~(MODE_MONO_LUMA);
- dcon_disp_mode |= MODE_CSWIZZLE;
- if (useaa)
- dcon_disp_mode |= MODE_COL_AA;
- }
-
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- return 0;
-}
-
-/* For now, this will be really stupid - we need to address how
- * DCONLOAD works in a sleep and account for it accordingly
- */
-
-static void dcon_sleep(int state)
-{
- /* Turn off the backlight and put the DCON to sleep */
-
- if (state == dcon_sleep_val)
- return;
-
- if (state == DCON_SLEEP) {
- dcon_disp_mode &= ~MODE_BL_ENABLE;
- dcon_disp_mode |= MODE_SLEEP;
- }
- else {
- /* Only re-enable the backlight if the backlight value is set */
-
- if (bl_val != 0)
- dcon_disp_mode |= MODE_BL_ENABLE;
-
- dcon_disp_mode &= ~MODE_SLEEP;
- }
-
- dcon_sleep_val = state;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
-
- /* We should turn off some stuff in the framebuffer - but what? */
-}
-
-/* Set the source of the display (CPU or DCON) */
-
-static void dcon_source_switch(struct work_struct *work)
-{
- DECLARE_WAITQUEUE(wait, current);
- int source = dcon_pending;
-
- if (dcon_source == source)
- return;
-
- dcon_switched = 0;
-
- switch (source) {
- case DCON_SOURCE_CPU:
-
- /* Enable the scanline interrupt bit */
- if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
- printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n");
- else {
- /* Wait up to one second for the scanline interrupt */
- wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
- }
-
- if (!dcon_switched)
- printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n");
-
- /*
- * Ideally we'd like to disable interrupts here so that the
- * fb_powerup and DCON turn on happen at a known time value;
- * however, we can't do that right now with fb_set_suspend
- * messing with semaphores.
- *
- * For now, we just hope..
- */
- if (fb_powerup(fbinfo)) {
- printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n");
- dcon_pending = DCON_SOURCE_DCON;
- return;
- }
-
- /* And turn off the DCON */
- outl(1<<11, gpio_base + GPIOx_OUT_VAL);
-
- /* Turn off the scanline interrupt */
- if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
- printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n");
-
- printk(KERN_INFO "olpc-dcon: The CPU has control\n");
- break;
- case DCON_SOURCE_DCON:
- {
- int t;
-
- add_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_UNINTERRUPTIBLE);
-
- /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
- control */
-
- outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
-
- t = schedule_timeout(HZ/2);
- remove_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_RUNNING);
-
- if (!dcon_switched)
- printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
-
- /* Turn off the graphics engine completely */
- fb_powerdown(fbinfo);
-
- printk(KERN_INFO "olpc-dcon: The DCON has control\n");
- break;
- }
- default:
- BUG();
- }
-
- dcon_source = source;
-}
-
-static DECLARE_WORK(dcon_work, dcon_source_switch);
-
-static int dcon_set_source(int arg)
-{
- if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
- return -EINVAL;
-
- if (dcon_pending == arg)
- return 0;
-
- dcon_pending = arg;
- if ((dcon_source != arg) && !work_pending(&dcon_work))
- schedule_work(&dcon_work);
-
- return 0;
-}
-
-static int dcon_set_source_sync(int arg)
-{
- int ret = dcon_set_source(arg);
- if (!ret)
- flush_scheduled_work();
- return ret;
-}
-
-static int dconbl_set(struct backlight_device *dev) {
-
- int level = dev->props.brightness;
-
- if (dev->props.power != FB_BLANK_UNBLANK)
- level = 0;
-
- dcon_set_backlight(level);
- return 0;
-}
-
-static int dconbl_get(struct backlight_device *dev) {
- return dcon_get_backlight();
-}
-
-static ssize_t dcon_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%4.4X\n", dcon_disp_mode);
-}
-
-static ssize_t dcon_sleep_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_sleep_val);
-}
-
-static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
- return sprintf(buf, "%d\n", dcon_source);
-}
-
-static ssize_t dcon_freeze_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
-}
-
-static ssize_t dcon_output_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_output);
-}
-
-static ssize_t dcon_resumeline_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", resumeline);
-}
-
-static int _strtoul(const char *buf, int len, unsigned int *val)
-{
-
- char *endp;
- unsigned int output = simple_strtoul(buf, &endp, 0);
- int size = endp - buf;
-
- if (*endp && isspace(*endp))
- size++;
-
- if (size != len)
- return -EINVAL;
-
- *val = output;
- return 0;
-}
-
-static ssize_t dcon_output_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
- dcon_set_output(output);
- rc = count;
- }
-
- return rc;
-}
-
-static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- dcon_set_source(output);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_freeze_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &output))
- return rc;
-
- dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_resumeline_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int rl;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &rl))
- return rc;
-
- resumeline = rl;
- dcon_write(DCON_REG_SCAN_INT, resumeline);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_sleep_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
-
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
- return count;
-}
-
-static struct device_attribute dcon_device_files[] = {
- __ATTR(mode, 0444, dcon_mode_show, NULL),
- __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
- __ATTR(source, 0644, dcon_source_show, dcon_source_store),
- __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
- __ATTR(output, 0644, dcon_output_show, dcon_output_store),
- __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
-};
-
-static struct backlight_ops dcon_bl_ops = {
- .get_brightness = dconbl_get,
- .update_status = dconbl_set
-};
-
-/* List of GPIOs that we care about:
- (in) GPIO12 -- DCONBLNK
- (in) GPIO[56] -- DCONSTAT[01]
- (out) GPIO11 -- DCONLOAD
-*/
-
-#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
-#define OUT_GPIOS (1<<11)
-
-static irqreturn_t dcon_interrupt(int, void *);
-
-static int dcon_request_irq(void)
-{
- unsigned long lo, hi;
- unsigned char lob;
-
- rdmsr(MSR_LBAR_GPIO, lo, hi);
-
- /* Check the mask and whether GPIO is enabled (sanity check) */
- if (hi != 0x0000f001) {
- printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
- return -ENODEV;
- }
-
- /* Mask off the IO base address */
- gpio_base = lo & 0x0000ff00;
-
- /* Turn off the event enable for GPIO7 just to be safe */
- outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
-
- /* Set the directions for the GPIO pins */
- outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
- outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
-
- /* Set up the interrupt mappings */
-
- /* Set the IRQ to pair 2 */
- geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
-
- /* Enable group 2 to trigger the DCON interrupt */
- geode_gpio_set_irq(2, DCON_IRQ);
-
- /* Select edge level for interrupt (in PIC) */
-
- lob = inb(0x4d0);
- lob &= ~(1 << DCON_IRQ);
- outb(lob, 0x4d0);
-
- /* Register the interupt handler */
- if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
- return -EIO;
-
- /* Clear INV_EN for GPIO7 (DCONIRQ) */
- outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
-
- /* Enable filter for GPIO12 (DCONBLANK) */
- outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
-
- /* Disable filter for GPIO7 */
- outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
-
- /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
-
- outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
- outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
-
- /* Add GPIO12 to the Filter Event Pair #7 */
- outb(12, gpio_base + GPIO_FE7_SEL);
-
- /* Turn off negative Edge Enable for GPIO12 */
- outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
-
- /* Enable negative Edge Enable for GPIO7 */
- outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
-
- /* Zero the filter amount for Filter Event Pair #7 */
- outw(0, gpio_base + GPIO_FLT7_AMNT);
-
- /* Clear the negative edge status for GPIO7 and GPIO12 */
- outl((1<<7) | (1<<12), gpio_base+0x4c);
-
- /* FIXME: Clear the posiitive status as well, just to be sure */
- outl((1<<7) | (1<<12), gpio_base+0x48);
-
- /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
- outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
-
- /* Determine the current state by reading the GPIO bit */
- /* Earlier stages of the boot process have established the state */
- dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
- ? DCON_SOURCE_CPU
- : DCON_SOURCE_DCON;
- dcon_pending = dcon_source;
-
- return 0;
-}
-
-static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
-{
- if (dcon_client == NULL)
- return 0;
-
- /* Turn off the DCON. Entirely. */
- dcon_write(DCON_REG_MODE, 0x39);
- dcon_write(DCON_REG_MODE, 0x32);
- return 0;
-}
-
-static int dcon_conswitch_notify(struct notifier_block *nb,
- unsigned long mode, void *dummy)
-{
- if (mode == CONSOLE_EVENT_SWITCH_TEXT)
- dcon_sleep(DCON_ACTIVE);
-
- return 0;
-}
-
-static struct notifier_block dcon_nb = {
- .notifier_call = dcon_reboot_notify,
- .priority = -1,
-};
-
-static struct notifier_block dcon_console_nb = {
- .notifier_call = dcon_conswitch_notify,
- .priority = -1,
-};
-
-static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
-{
- struct i2c_client *client;
- uint16_t ver;
- int rc, i;
-
- if (!olpc_has_dcon()) {
- printk("olpc-dcon: No DCON is attached.\n");
- return -ENODEV;
- }
-
- if (num_registered_fb >= 1)
- fbinfo = registered_fb[0];
-
- if (adap->id != I2C_HW_SMBUS_SCX200) {
- printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
- adap->id, I2C_HW_SMBUS_SCX200);
- return -ENXIO;
- }
-
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
-
- strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
- client->addr = addr;
- client->adapter = adap;
- client->driver = &dcon_driver;
-
- if ((rc = i2c_attach_client(client)) != 0) {
- printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
- goto eclient;
- }
-
- ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
-
- if ((ver >> 8) != 0xDC) {
- printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
- rc = -ENXIO;
- goto ei2c;
- }
-
- if ((rc = dcon_request_irq())) {
- printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
- goto ei2c;
- }
-
- if (ver < 0xdc02 && !noinit) {
- /* Initialize the DCON registers */
-
- /* Start with work-arounds for DCON ASIC */
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x0b, 0x007a);
- i2c_smbus_write_word_data(client, 0x36, 0x025c);
- i2c_smbus_write_word_data(client, 0x37, 0x025e);
-
- /* Initialise SDRAM */
-
- i2c_smbus_write_word_data(client, 0x3b, 0x002b);
- i2c_smbus_write_word_data(client, 0x41, 0x0101);
- i2c_smbus_write_word_data(client, 0x42, 0x0101);
- }
-
- /* Colour swizzle, AA, no passthrough, backlight */
-
- dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
- if (useaa)
- dcon_disp_mode |= MODE_COL_AA;
- i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
-
-
- /* Set the scanline to interrupt on during resume */
-
- i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
-
- /* Add the DCON device */
-
- dcon_device = platform_device_alloc("dcon", -1);
-
- if (dcon_device == NULL) {
- printk(KERN_ERR "dcon: Unable to create the DCON device\n");
- rc = -ENOMEM;
- goto eirq;
- }
-
- if ((rc = platform_device_add(dcon_device))) {
- printk(KERN_ERR "dcon: Unable to add the DCON device\n");
- goto edev;
- }
-
- for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
- device_create_file(&dcon_device->dev, &dcon_device_files[i]);
-
- /* Add the backlight device for the DCON */
-
- dcon_client = client;
-
- dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
- NULL, &dcon_bl_ops);
-
- if (IS_ERR(dcon_bl_dev)) {
- printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
- dcon_bl_dev = NULL;
- }
- else {
- dcon_bl_dev->props.max_brightness = 15;
- dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
- dcon_bl_dev->props.brightness = dcon_get_backlight();
-
- backlight_update_status(dcon_bl_dev);
- }
-
- register_reboot_notifier(&dcon_nb);
- console_event_register(&dcon_console_nb);
-
- printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF);
-
- return 0;
-
- edev:
- platform_device_unregister(dcon_device);
- dcon_device = NULL;
- eirq:
- free_irq(DCON_IRQ, &dcon_driver);
- ei2c:
- i2c_detach_client(client);
- eclient:
- kfree(client);
-
- return rc;
-}
-
-static int dcon_attach(struct i2c_adapter *adap)
-{
- int ret;
-
- ret = i2c_probe(adap, &addr_data, dcon_probe);
-
- if (dcon_client == NULL)
- printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
-
- return ret;
-}
-
-static int dcon_detach(struct i2c_client *client)
-{
- int rc;
- dcon_client = NULL;
-
- unregister_reboot_notifier(&dcon_nb);
- console_event_unregister(&dcon_console_nb);
-
- free_irq(DCON_IRQ, &dcon_driver);
-
- if ((rc = i2c_detach_client(client)) == 0)
- kfree(i2c_get_clientdata(client));
-
- if (dcon_bl_dev != NULL)
- backlight_device_unregister(dcon_bl_dev);
-
- if (dcon_device != NULL)
- platform_device_unregister(dcon_device);
- cancel_work_sync(&dcon_work);
-
- return rc;
-}
-
-
-#ifdef CONFIG_PM
-static int dcon_suspend(struct i2c_client *client, pm_message_t state)
-{
- if (dcon_sleep_val != DCON_ACTIVE)
- return 0;
-
- /* Set up the DCON to have the source */
- return dcon_set_source_sync(DCON_SOURCE_DCON);
-}
-
-static int dcon_resume(struct i2c_client *client)
-{
- int x;
- if (dcon_sleep_val != DCON_ACTIVE)
- return 0;
-
- /* HACK: ensure the bus is stable */
- do {
- x = dcon_read(DCON_REG_ID);
- } while (x < 0);
-
- return dcon_set_source(DCON_SOURCE_CPU);
-}
-
-#endif
-
-static irqreturn_t dcon_interrupt(int irq, void *id)
-{
- int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
-
- /* Clear the negative edge status for GPIO7 */
- outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
-
- switch (status & 3) {
- case 3:
- printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
- break;
- case 2: /* switch to DCON mode */
- case 1: /* switch to CPU mode */
- dcon_switched = 1;
- wake_up(&dcon_wait_queue);
- break;
- case 0:
- printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
- }
-
- return IRQ_HANDLED;
-}
-
-static struct i2c_driver dcon_driver = {
- .driver = {
- .name = "OLPC-DCON",
- },
- .id = I2C_DRIVERID_DCON,
- .attach_adapter = dcon_attach,
- .detach_client = dcon_detach,
-#ifdef CONFIG_PM
- .suspend = dcon_suspend,
- .resume = dcon_resume,
-#endif
-};
-
-
-static int __init olpc_dcon_init(void)
-{
- i2c_add_driver(&dcon_driver);
- return 0;
-}
-
-static void __exit olpc_dcon_exit(void)
-{
- i2c_del_driver(&dcon_driver);
-}
-
-module_init(olpc_dcon_init);
-module_exit(olpc_dcon_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h
deleted file mode 100644
index 6453ca4ba0..0000000000
--- a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef OLPC_DCON_H_
-#define OLPC_DCON_H_
-
-/* DCON registers */
-
-#define DCON_REG_ID 0
-#define DCON_REG_MODE 1
-
-#define MODE_PASSTHRU (1<<0)
-#define MODE_SLEEP (1<<1)
-#define MODE_SLEEP_AUTO (1<<2)
-#define MODE_BL_ENABLE (1<<3)
-#define MODE_BLANK (1<<4)
-#define MODE_CSWIZZLE (1<<5)
-#define MODE_COL_AA (1<<6)
-#define MODE_MONO_LUMA (1<<7)
-#define MODE_SCAN_INT (1<<8)
-#define MODE_CLOCKDIV (1<<9)
-#define MODE_DEBUG (1<<14)
-#define MODE_SELFTEST (1<<15)
-
-#define DCON_REG_HRES 2
-#define DCON_REG_HTOTAL 3
-#define DCON_REG_HSYNC_WIDTH 4
-#define DCON_REG_VRES 5
-#define DCON_REG_VTOTAL 6
-#define DCON_REG_VSYNC_WIDTH 7
-#define DCON_REG_TIMEOUT 8
-#define DCON_REG_SCAN_INT 9
-#define DCON_REG_BRIGHT 10
-
-/* GPIO registers (CS5536) */
-
-#define MSR_LBAR_GPIO 0x5140000C
-
-#define GPIOx_OUT_VAL 0x00
-#define GPIOx_OUT_EN 0x04
-#define GPIOx_IN_EN 0x20
-#define GPIOx_INV_EN 0x24
-#define GPIOx_IN_FLTR_EN 0x28
-#define GPIOx_EVNTCNT_EN 0x2C
-#define GPIOx_READ_BACK 0x30
-#define GPIOx_EVNT_EN 0x38
-#define GPIOx_NEGEDGE_EN 0x44
-#define GPIOx_NEGEDGE_STS 0x4C
-#define GPIO_FLT7_AMNT 0xD8
-#define GPIO_MAP_X 0xE0
-#define GPIO_MAP_Y 0xE4
-#define GPIO_FE7_SEL 0xF7
-
-
-/* Status values */
-
-#define DCONSTAT_SCANINT 0
-#define DCONSTAT_SCANINT_DCON 1
-#define DCONSTAT_DISPLAYLOAD 2
-#define DCONSTAT_MISSED 3
-
-/* Source values */
-
-#define DCON_SOURCE_DCON 0
-#define DCON_SOURCE_CPU 1
-
-/* Output values */
-#define DCON_OUTPUT_COLOR 0
-#define DCON_OUTPUT_MONO 1
-
-/* Sleep values */
-#define DCON_ACTIVE 0
-#define DCON_SLEEP 1
-
-/* Interrupt */
-#define DCON_IRQ 6
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h b/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h
deleted file mode 100644
index 79b08b164f..0000000000
--- a/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Definitions for Open Firmware client interface on 32-bit system.
- * OF Cell size is 4. Integer properties are encoded big endian,
- * as with all OF implementations.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _OFW_H
-#define _OFW_H
-
-extern int ofw(char *, int, int, ...);
-
-#endif
diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h b/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h
deleted file mode 100644
index 26bc1a8d3f..0000000000
--- a/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* OLPC machine specific definitions */
-
-#ifndef ASM_OLPC_H_
-#define ASM_OLPC_H_
-
-#include <asm/geode.h>
-
-struct olpc_platform_t {
- int flags;
- int boardrev;
- int ecver;
-};
-
-#define OLPC_F_PRESENT 0x01
-#define OLPC_F_DCON 0x02
-#define OLPC_F_VSA 0x04
-
-enum
-{
- OLPC_REV_A = 0,
-
- OLPC_REV_PRE_B1,
- OLPC_REV_B1,
- OLPC_REV_PRE_B2,
- OLPC_REV_B2,
- OLPC_REV_PRE_B3,
- OLPC_REV_B3,
- OLPC_REV_B4,
- OLPC_REV_C1,
- OLPC_REV_R1,
- OLPC_REV_UNKNOWN /* this should always come last */
-};
-
-#ifndef CONFIG_OLPC
-
-static inline int machine_is_olpc(void) { return 0; }
-static inline int olpc_has_dcon(void) { return 0; }
-static inline int olpc_has_vsa(void) { return 0; }
-static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; }
-
-#else
-
-extern struct olpc_platform_t olpc_platform_info;
-
-static inline int
-machine_is_olpc(void)
-{
- return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
-}
-
-static inline int
-olpc_has_dcon(void)
-{
- return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
-}
-
-static inline int
-olpc_has_vsa(void)
-{
- return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-static inline int
-olpc_get_rev(void)
-{
- return olpc_platform_info.boardrev;
-}
-
-static inline int
-olpc_rev_after(int rev)
-{
- return olpc_platform_info.boardrev > rev &&
- olpc_platform_info.boardrev != OLPC_REV_UNKNOWN;
-}
-
-static inline int
-olpc_rev_before(int rev)
-{
- return olpc_platform_info.boardrev < rev ||
- olpc_platform_info.boardrev == OLPC_REV_UNKNOWN;
-}
-
-#endif
-
-/* EC functions */
-
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen);
-
-void olpc_register_battery_callback(void (*f)(unsigned long));
-void olpc_deregister_battery_callback(void);
-
-/* EC commands and responses */
-
-/* SCI source values */
-
-#define EC_SCI_SRC_EMPTY 0x00
-#define EC_SCI_SRC_GAME 0x01
-#define EC_SCI_SRC_BATTERY 0x02
-#define EC_SCI_SRC_BATSOC 0x04
-#define EC_SCI_SRC_BATERR 0x08
-#define EC_SCI_SRC_EBOOK 0x10
-#define EC_SCI_SRC_WLAN 0x20
-#define EC_SCI_SRC_ACPWR 0x40
-
-/* GPIO assignments */
-
-#define OLPC_GPIO_MIC_AC 1
-#define OLPC_GPIO_DCON_IRQ 7
-#define OLPC_GPIO_THRM_ALRM 10
-#define OLPC_GPIO_WORKAUX 24
-#define OLPC_GPIO_LID 26
-#define OLPC_GPIO_ECSCI 27
-
-#endif
-
diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h b/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h
deleted file mode 100644
index 59d3bddccf..0000000000
--- a/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _I386_PROM_H
-#define _I386_PROM_H
-#ifdef __KERNEL__
-
-
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- * Updates for SPARC64 by David S. Miller
- * Updates for i386/OLPC by Andres Salomon
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <asm/atomic.h>
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
- char *name;
- int length;
- void *value;
- struct property *next;
-};
-
-struct device_node {
- const char *name;
- const char *type;
- phandle node;
-// phandle linux_phandle;
- char *path_component_name;
- char *full_name;
-
- struct property *properties;
- struct property *deadprops; /* removed properties */
- struct device_node *parent;
- struct device_node *child;
- struct device_node *sibling;
- struct device_node *next; /* next device of same type */
- struct device_node *allnext; /* next in list of all nodes */
- struct proc_dir_entry *pde; /* this node's proc directory */
- struct kref kref;
- unsigned long _flags;
- void *data;
-};
-
-/* flag descriptions */
-#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
-
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
-#define OF_BAD_ADDR ((u64)-1)
-
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
- dn->pde = de;
-}
-
-extern struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name);
-#define for_each_node_by_name(dn, name) \
- for (dn = of_find_node_by_name(NULL, name); dn; \
- dn = of_find_node_by_name(dn, name))
-extern struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type);
-#define for_each_node_by_type(dn, type) \
- for (dn = of_find_node_by_type(NULL, type); dn; \
- dn = of_find_node_by_type(dn, type))
-extern struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compat);
-extern struct device_node *of_find_node_by_path(const char *path);
-extern struct device_node *of_find_node_by_phandle(phandle handle);
-extern struct device_node *of_get_parent(const struct device_node *node);
-extern struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev);
-extern struct property *of_find_property(const struct device_node *np,
- const char *name,
- int *lenp);
-//extern struct device_node *of_node_get(struct device_node *node);
-//extern void of_node_put(struct device_node *node);
-extern int of_device_is_compatible(const struct device_node *device,
- const char *);
-extern const void *of_get_property(const struct device_node *node,
- const char *name,
- int *lenp);
-#define get_property(node,name,lenp) of_get_property(node,name,lenp)
-extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
-extern int of_getintprop_default(struct device_node *np,
- const char *name,
- int def);
-extern int of_n_addr_cells(struct device_node *np);
-extern int of_n_size_cells(struct device_node *np);
-
-extern void prom_build_devicetree(void);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/target/linux/olpc/files-2.6.23/include/linux/battery.h b/target/linux/olpc/files-2.6.23/include/linux/battery.h
deleted file mode 100644
index 2f856a0d75..0000000000
--- a/target/linux/olpc/files-2.6.23/include/linux/battery.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Driver model for batteries
- *
- * © 2006 David Woodhouse <dwmw2@infradead.org>
- *
- * Based on LED Class support, by John Lenz and Richard Purdie:
- *
- * © 2005 John Lenz <lenz@cs.wisc.edu>
- * © 2005-2006 Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __LINUX_BATTERY_H__
-#define __LINUX_BATTERY_H__
-
-struct device;
-struct class_device;
-
-/*
- * Battery Core
- */
-#define PWRDEV_TYPE_BATTERY 0
-#define PWRDEV_TYPE_AC 1
-
-#define BAT_STAT_PRESENT (1<<0)
-#define BAT_STAT_LOW (1<<1)
-#define BAT_STAT_FULL (1<<2)
-#define BAT_STAT_CHARGING (1<<3)
-#define BAT_STAT_DISCHARGING (1<<4)
-#define BAT_STAT_OVERTEMP (1<<5)
-#define BAT_STAT_CRITICAL (1<<6)
-#define BAT_STAT_FIRE (1<<7)
-#define BAT_STAT_CHARGE_DONE (1<<8)
-
-/* Thou shalt not export any attributes in sysfs except these, and
- with these units: */
-#define BAT_INFO_STATUS "status" /* Not free-form. Use
- provided function */
-#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */
-#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */
-
-#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */
-#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */
-
-#define BAT_INFO_VOLTAGE "voltage" /* mV */
-#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */
-
-#define BAT_INFO_CURRENT "current" /* mA */
-#define BAT_INFO_CURRENT_NOW "current_now" /* mA */
-
-#define BAT_INFO_POWER "power" /* mW */
-#define BAT_INFO_POWER_NOW "power_now" /* mW */
-
-/* The following capacity/charge properties are represented in either
- mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
-#define BAT_INFO_RATE "rate" /* CAP_UNITS */
-#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be
- either mA or mW */
-
-#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */
-
-#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */
-#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */
-#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */
-#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */
-
-#define BAT_INFO_MANUFACTURER "manufacturer" /* string */
-#define BAT_INFO_TECHNOLOGY "technology" /* string */
-#define BAT_INFO_MODEL "model" /* string */
-#define BAT_INFO_SERIAL "serial" /* string */
-#define BAT_INFO_OEM_INFO "oem_info" /* string */
-
-#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */
-#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */
-#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */
-
-struct battery_dev {
- int status_cap;
- int id;
- int type;
- const char *name;
-
- struct device *dev;
-};
-
-int battery_device_register(struct device *parent,
- struct battery_dev *battery_cdev);
-void battery_device_unregister(struct battery_dev *battery_cdev);
-
-
-ssize_t battery_attribute_show_status(char *buf, unsigned long status);
-ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
-#endif /* __LINUX_BATTERY_H__ */
diff --git a/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c b/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c
deleted file mode 100644
index 791be73bfb..0000000000
--- a/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c
+++ /dev/null
@@ -1,110 +0,0 @@
-#include <sound/driver.h>
-#include <sound/core.h>
-#include <sound/info.h>
-#include <sound/control.h>
-#include <sound/ac97_codec.h>
-
-#include <asm/olpc.h>
-#include "cs5535audio.h"
-
-/*
- * OLPC has an additional feature on top of the regular AD1888 codec features.
- * It has an Analog Input mode that is switched into (after disabling the
- * High Pass Filter) via GPIO. It is only supported on B2 and later models.
- */
-
-int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
-{
- int err;
-
- /*
- * update the High Pass Filter (via AC97_AD_TEST2), and then set
- * Analog Input mode through a GPIO.
- */
-
- if (val) {
- err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
- 1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
- geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
- }
- else {
- err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
- 1<<AC97_AD_HPFD_SHIFT, 0);
- geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
- }
- if (err < 0)
- snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(olpc_ai_enable);
-
-static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
-
-static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
- GPIO_OUTPUT_VAL);
- return 0;
-}
-
-static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
- struct snd_ac97 *ac97 = cs5535au->ac97;
-
- olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
-
- return 1;
-}
-
-static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
-{
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "DC Mode Enable",
- .info = snd_cs5535audio_ai_info,
- .get = snd_cs5535audio_ai_get,
- .put = snd_cs5535audio_ai_put,
- .private_value = 0
-};
-
-void __devinit olpc_prequirks(struct snd_card *card,
- struct snd_ac97_template *ac97)
-{
- /* Bail if this isn't an OLPC platform */
- if (!machine_is_olpc())
- return;
-
- /* If on an OLPC B3 or higher, invert EAPD. */
- if (olpc_rev_after(OLPC_REV_B2))
- ac97->scaps |= AC97_SCAP_INV_EAPD;
-}
-
-int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
-{
- struct snd_ctl_elem_id elem;
-
- /* Bail if this isn't an OLPC platform */
- if (!machine_is_olpc())
- return 0;
-
- /* drop the original ad1888 HPF control */
- memset(&elem, 0, sizeof(elem));
- elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
- strcpy(elem.name, "High Pass Filter Enable");
- snd_ctl_remove_id(card, &elem);
-
- /* add the override for OLPC's HPF */
- return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
- ac97->private_data));
-}
diff --git a/target/linux/olpc/patches-2.6.23/100-olpc.patch b/target/linux/olpc/patches-2.6.23/100-olpc.patch
deleted file mode 100644
index 4607aeda68..0000000000
--- a/target/linux/olpc/patches-2.6.23/100-olpc.patch
+++ /dev/null
@@ -1,5880 +0,0 @@
-Index: linux-2.6.23.17/arch/i386/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/Kconfig
-+++ linux-2.6.23.17/arch/i386/Kconfig
-@@ -796,6 +796,15 @@ config SECCOMP
-
- If unsure, say Y. Only embedded should say N here.
-
-+config VGA_NOPROBE
-+ bool "Don't probe VGA at boot" if EMBEDDED
-+ default n
-+ help
-+ Saying Y here will cause the kernel to not probe VGA at boot time.
-+ This will break everything that depends on the probed screen
-+ data. Say N here unless you are absolutely sure this is what you
-+ want.
-+
- source kernel/Kconfig.hz
-
- config KEXEC
-@@ -1120,6 +1129,9 @@ config PCI_GODIRECT
- config PCI_GOANY
- bool "Any"
-
-+config PCI_GOOLPC
-+ bool "OLPC"
-+
- endchoice
-
- config PCI_BIOS
-@@ -1129,7 +1141,7 @@ config PCI_BIOS
-
- config PCI_DIRECT
- bool
-- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
-+ depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
- default y
-
- config PCI_MMCONFIG
-@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG
- depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
- default y
-
-+config PCI_OLPC
-+ bool
-+ depends on PCI && PCI_GOOLPC
-+ default y
-+
- source "drivers/pci/pcie/Kconfig"
-
- source "drivers/pci/Kconfig"
-@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER
- processor goes idle (as is done by the scheduler). The
- other workaround is idle=poll boot option.
-
-+config GEODE_MFGPT_TIMER
-+ bool "Geode Multi-Function General Purpose Timer (mfgpt) Support"
-+ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-+ default y
-+ help
-+ This driver provides a clock event source based on the MFGPT
-+ timer(s) in the CS5535 and CS5536 companion chip for the geode.
-+ MFGPTs have a better resolution and max interval than the
-+ generic PIT, and are suitable for use as high-res timers.
-+
- config K8_NB
- def_bool y
- depends on AGP_AMD64
-
-+config OLPC
-+ bool "OLPC Support"
-+ default n
-+ help
-+ Add support for detecting the unique features of the OLPC
-+ Childrens Machine
-+
-+config OLPC_PM
-+ tristate "OLPC power management support"
-+ default y
-+ depends on OLPC
-+ help
-+ Add support for the Geode power management facilities on the
-+ OLPC Childrens Machine
-+
-+config OPEN_FIRMWARE
-+ bool "Support for Open Firmware"
-+ default y if OLPC
-+ help
-+ This option adds support for the implementation of Open Firmware
-+ that is used on the OLPC Children's Machine.
-+ If unsure, say N here.
-+
- source "drivers/pcmcia/Kconfig"
-
- source "drivers/pci/hotplug/Kconfig"
-Index: linux-2.6.23.17/arch/i386/kernel/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/Makefile
-+++ linux-2.6.23.17/arch/i386/kernel/Makefile
-@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
- obj-$(CONFIG_HPET_TIMER) += hpet.o
- obj-$(CONFIG_K8_NB) += k8.o
--obj-$(CONFIG_MGEODE_LX) += geode.o
-+obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o
-
- obj-$(CONFIG_VMI) += vmi.o vmiclock.o
- obj-$(CONFIG_PARAVIRT) += paravirt.o
- obj-y += pcspeaker.o
-
- obj-$(CONFIG_SCx200) += scx200.o
-+obj-$(CONFIG_OLPC) += olpc.o
-+obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o
-+obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o
-+obj-$(CONFIG_PROMFS_FS) += prom.o
-
- # vsyscall.o contains the vsyscall DSO images as __initdata.
- # We must build both images before we can assemble it.
-Index: linux-2.6.23.17/arch/i386/kernel/geode.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/geode.c
-+++ linux-2.6.23.17/arch/i386/kernel/geode.c
-@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event
-
- static int __init geode_southbridge_init(void)
- {
-+ int timers;
-+
- if (!is_geode())
- return -ENODEV;
-
- init_lbars();
-+ timers = geode_mfgpt_detect();
-+ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers);
- return 0;
- }
-
-Index: linux-2.6.23.17/arch/i386/kernel/head.S
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/head.S
-+++ linux-2.6.23.17/arch/i386/kernel/head.S
-@@ -117,8 +117,34 @@ ENTRY(startup_32)
- movl $(COMMAND_LINE_SIZE/4),%ecx
- rep
- movsl
-+
-+#ifdef CONFIG_OPEN_FIRMWARE
-+/*
-+ * If Open Firmware booted us, save the OFW client interface callback address
-+ * and preserve the OFW page mappings by priming the kernel's new page
-+ * directory area with a copy of the OFW page directory. That lets OFW stay
-+ * resident in high memory (high in both the virtual and physical spaces)
-+ * for at least long enough to copy out the device tree.
-+ */
- 1:
-+ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp
-+ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */
-+ jne 1f
-+
-+ mov 0x8(%ebp), %eax /* Save callback address */
-+ mov %eax, call_firmware - __PAGE_OFFSET
-+
-+ /* Copy the OFW pdir into swapper_pg_dir */
-+ movl %esi, %edx /* save %esi */
-+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi
-+ movl %cr3, %esi /* Source is current pg_dir base address */
-+ movl $1024, %ecx /* Number of page directory entries */
-+ rep
-+ movsl
-+ movl %edx, %esi /* restore %esi */
-+#endif
-
-+1:
- /*
- * Initialize page tables. This creates a PDE and a set of page
- * tables, which are located immediately beyond _end. The variable
-@@ -129,6 +155,7 @@ ENTRY(startup_32)
- * Warning: don't use %esi or the stack in this code. However, %esp
- * can be used as a GPR if you really need it...
- */
-+
- page_pde_offset = (__PAGE_OFFSET >> 20);
-
- movl $(pg0 - __PAGE_OFFSET), %edi
-Index: linux-2.6.23.17/arch/i386/kernel/setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/setup.c
-+++ linux-2.6.23.17/arch/i386/kernel/setup.c
-@@ -362,8 +362,10 @@ void __init zone_sizes_init(void)
- {
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-+#ifdef CONFIG_ZONE_DMA
- max_zone_pfns[ZONE_DMA] =
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-+#endif
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- #ifdef CONFIG_HIGHMEM
- max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void
- */
- acpi_reserve_bootmem();
- #endif
-+#ifdef CONFIG_OLPC_PM
-+ reserve_bootmem(0xf0000, PAGE_SIZE);
-+#endif
- #ifdef CONFIG_X86_FIND_SMP_CONFIG
- /*
- * Find and reserve possible boot-time SMP configuration:
-Index: linux-2.6.23.17/arch/i386/pci/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/Makefile
-+++ linux-2.6.23.17/arch/i386/pci/Makefile
-@@ -3,6 +3,7 @@ obj-y := i386.o init.o
- obj-$(CONFIG_PCI_BIOS) += pcbios.o
- obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
- obj-$(CONFIG_PCI_DIRECT) += direct.o
-+obj-$(CONFIG_PCI_OLPC) += olpc.o
-
- pci-y := fixup.o
- pci-$(CONFIG_ACPI) += acpi.o
-Index: linux-2.6.23.17/arch/i386/pci/init.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/init.c
-+++ linux-2.6.23.17/arch/i386/pci/init.c
-@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
- #ifdef CONFIG_PCI_MMCONFIG
- pci_mmcfg_init(type);
- #endif
-+#ifdef CONFIG_PCI_OLPC
-+ pci_olpc_init();
-+#endif
- if (raw_pci_ops)
- return 0;
- #ifdef CONFIG_PCI_BIOS
-Index: linux-2.6.23.17/arch/i386/pci/pci.h
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/pci.h
-+++ linux-2.6.23.17/arch/i386/pci/pci.h
-@@ -93,6 +93,7 @@ extern void pci_direct_init(int type);
- extern void pci_pcbios_init(void);
- extern void pci_mmcfg_init(int type);
- extern void pcibios_sort(void);
-+extern void pci_olpc_init(void);
-
- /* pci-mmconfig.c */
-
-Index: linux-2.6.23.17/drivers/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/Makefile
-+++ linux-2.6.23.17/drivers/Makefile
-@@ -23,6 +23,8 @@ obj-y += char/
-
- obj-$(CONFIG_CONNECTOR) += connector/
-
-+obj-$(CONFIG_SYSPROF) += sysprof/
-+
- # i810fb and intelfb depend on char/agp/
- obj-$(CONFIG_FB_I810) += video/i810/
- obj-$(CONFIG_FB_INTEL) += video/intelfb/
-Index: linux-2.6.23.17/drivers/char/vt_ioctl.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c
-+++ linux-2.6.23.17/drivers/char/vt_ioctl.c
-@@ -37,6 +37,9 @@
- char vt_dont_switch;
- extern struct tty_driver *console_driver;
-
-+/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
-+RAW_NOTIFIER_HEAD(console_notifier_list);
-+
- #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
- #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
-
-@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str
- vc->vc_mode = (unsigned char) arg;
- if (console != fg_console)
- return 0;
-+
-+ /* Notify listeners if the current fg_console has switched */
-+
-+ raw_notifier_call_chain(&console_notifier_list,
-+ (arg == KD_TEXT) ?
-+ CONSOLE_EVENT_SWITCH_TEXT :
-+ CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
-+
- /*
- * explicitly blank/unblank the screen if switching modes
- */
-Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c
-+++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
-@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
- module_param_array(base, int, NULL, 0);
- MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
-
-+static unsigned int smbclk = 0x70;
-+module_param(smbclk, uint, 0);
-+MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
-+
- #define POLL_TIMEOUT (HZ/5)
-
- enum scx200_acb_state {
-@@ -108,6 +112,7 @@ struct scx200_acb_iface {
- #define ACBADDR (iface->base + 4)
- #define ACBCTL2 (iface->base + 5)
- #define ACBCTL2_ENABLE 0x01
-+#define ACBCTL3 (iface->base + 6)
-
- /************************************************************************/
-
-@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
- {
- u8 val;
-
-- /* Disable the ACCESS.bus device and Configure the SCL
-- frequency: 16 clock cycles */
-- outb(0x70, ACBCTL2);
-+ /* Disable the ACCESS.bus device and Configure the SCL */
-+
-+ outb((smbclk & 0x7F) << 1, ACBCTL2);
-+
-+ outb((smbclk >> 7) & 0xFF, ACBCTL3);
-
-- if (inb(ACBCTL2) != 0x70) {
-+ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
- pr_debug(NAME ": ACBCTL2 readback failed\n");
- return -ENXIO;
- }
-Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c
-+++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c
-@@ -63,12 +63,25 @@ static int atkbd_extra;
- module_param_named(extra, atkbd_extra, bool, 0);
- MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
-
-+#define ATKBD_KEY_UNKNOWN 0
-+#define ATKBD_KEY_NULL 0xFF0000FF
-+
-+#define ATKBD_SCR_1 0xFF0000FE
-+#define ATKBD_SCR_2 0xFF0000FD
-+#define ATKBD_SCR_4 0xFF0000FC
-+#define ATKBD_SCR_8 0xFF0000FB
-+#define ATKBD_SCR_CLICK 0xFF0000FA
-+#define ATKBD_SCR_LEFT 0xFF0000F9
-+#define ATKBD_SCR_RIGHT 0xFF0000F8
-+
-+#define ATKBD_SPECIAL 0xFF0000F8
-+
- /*
- * Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
- */
-
--static unsigned char atkbd_set2_keycode[512] = {
-+static unsigned int atkbd_set2_keycode[512] = {
-
- #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
-
-@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
- 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
-
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
-+
-+ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0,
-+ 156, 0, 0, 0, 0, 0, 0,125,
-+
- 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
- 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
- 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
-- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
-+
-+ 226, 0, 0, 0, 0, 0, 0, 0,
-+ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0,
-+
- 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
- 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
-
-@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
- #define ATKBD_RET_HANGEUL 0xf2
- #define ATKBD_RET_ERR 0xff
-
--#define ATKBD_KEY_UNKNOWN 0
--#define ATKBD_KEY_NULL 255
--
--#define ATKBD_SCR_1 254
--#define ATKBD_SCR_2 253
--#define ATKBD_SCR_4 252
--#define ATKBD_SCR_8 251
--#define ATKBD_SCR_CLICK 250
--#define ATKBD_SCR_LEFT 249
--#define ATKBD_SCR_RIGHT 248
--
--#define ATKBD_SPECIAL 248
--
- #define ATKBD_LED_EVENT_BIT 0
- #define ATKBD_REP_EVENT_BIT 1
-
-@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
- #define ATKBD_XL_HANJA 0x20
-
- static struct {
-- unsigned char keycode;
-+ unsigned int keycode;
- unsigned char set2;
- } atkbd_scroll_keys[] = {
- { ATKBD_SCR_1, 0xc5 },
-@@ -200,7 +206,7 @@ struct atkbd {
- char phys[32];
-
- unsigned short id;
-- unsigned char keycode[512];
-+ unsigned int keycode[512];
- unsigned char set;
- unsigned char translated;
- unsigned char extra;
-@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
- unsigned int code = data;
- int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
- int value;
-- unsigned char keycode;
-+ unsigned int keycode;
-
- #ifdef ATKBD_DEBUG
- printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
- atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
- }
- } else if (atkbd->set == 3) {
-- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
-+ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
-+ atkbd->keycode[i] = atkbd_set3_keycode[i];
- } else {
-- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
-+ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
-+ atkbd->keycode[i] = atkbd_set2_keycode[i];
-
- if (atkbd->scroll)
- for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
-@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc
- }
-
- input_dev->keycode = atkbd->keycode;
-- input_dev->keycodesize = sizeof(unsigned char);
-- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
-+ input_dev->keycodesize = sizeof(unsigned int);
-+ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
-
- for (i = 0; i < 512; i++)
- if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s
- return err;
- }
-
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- /*
- * atkbd_reconnect() tries to restore keyboard into a sane state and is
- * most likely called on resume.
-@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio
- struct atkbd *atkbd = serio_get_drvdata(serio);
- struct serio_driver *drv = serio->drv;
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_after(OLPC_REV_B2))
-+ if (serio->dev.power.power_state.event != PM_EVENT_ON)
-+ return 0;
-+#endif
-+
- if (!atkbd || !drv) {
- printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
- return -1;
-Index: linux-2.6.23.17/drivers/input/mouse/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig
-+++ linux-2.6.23.17/drivers/input/mouse/Kconfig
-@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
-
- If unsure, say N.
-
-+config MOUSE_PS2_OLPC
-+ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
-+ default n
-+ depends on MOUSE_PS2 && OLPC
-+ ---help---
-+ Say Y here if you have an OLPC PS/2 touchpad connected to
-+ your system.
-+
-+ If unsure, say N.
-+
- config MOUSE_SERIAL
- tristate "Serial mouse"
- select SERIO
-Index: linux-2.6.23.17/drivers/input/mouse/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/Makefile
-+++ linux-2.6.23.17/drivers/input/mouse/Makefile
-@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
- psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
- psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
- psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
-+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
-Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c
-+++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
-@@ -26,6 +26,7 @@
- #include "synaptics.h"
- #include "logips2pp.h"
- #include "alps.h"
-+#include "olpc.h"
- #include "lifebook.h"
- #include "trackpoint.h"
- #include "touchkit_ps2.h"
-@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
- */
- static DEFINE_MUTEX(psmouse_mutex);
-
--static struct workqueue_struct *kpsmoused_wq;
-+struct workqueue_struct *kpsmoused_wq;
-
- struct psmouse_protocol {
- enum psmouse_type type;
-@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
- goto out;
- }
-
-- if (psmouse->packet[1] == PSMOUSE_RET_ID) {
-+ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
- __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- serio_reconnect(serio);
- goto out;
-@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
- }
- }
-
-+/*
-+ * Try OLPC touchpad.
-+ */
- if (max_proto > PSMOUSE_IMEX) {
-+ if (olpc_detect(psmouse, set_properties) == 0) {
-+ if (!set_properties || olpc_init(psmouse) == 0)
-+ return PSMOUSE_OLPC;
-+/*
-+ * Init failed, try basic relative protocols
-+ */
-+ max_proto = PSMOUSE_IMEX;
-+ }
-+ }
-
-+ if (max_proto > PSMOUSE_IMEX) {
- if (genius_detect(psmouse, set_properties) == 0)
- return PSMOUSE_GENPS;
-
-@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm
- .detect = touchkit_ps2_detect,
- },
- #endif
-+#ifdef CONFIG_MOUSE_PS2_OLPC
-+ {
-+ .type = PSMOUSE_OLPC,
-+ .name = "OLPC",
-+ .alias = "olpc",
-+ .detect = olpc_detect,
-+ },
-+#endif
- {
- .type = PSMOUSE_CORTRON,
- .name = "CortronPS/2",
-Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h
-+++ linux-2.6.23.17/drivers/input/mouse/psmouse.h
-@@ -89,6 +89,7 @@ enum psmouse_type {
- PSMOUSE_TRACKPOINT,
- PSMOUSE_TOUCHKIT_PS2,
- PSMOUSE_CORTRON,
-+ PSMOUSE_OLPC,
- PSMOUSE_AUTO /* This one should always be last */
- };
-
-@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous
- int psmouse_reset(struct psmouse *psmouse);
- void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
-
-+extern struct workqueue_struct *kpsmoused_wq;
-
- struct psmouse_attribute {
- struct device_attribute dattr;
-Index: linux-2.6.23.17/drivers/input/serio/i8042.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/serio/i8042.c
-+++ linux-2.6.23.17/drivers/input/serio/i8042.c
-@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count
- #undef DELAY
-
- #ifdef CONFIG_PM
-+
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- /*
- * Here we try to restore the original BIOS settings. We only want to
- * do that once, when we really suspend, not when we taking memory
-@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count
- static int i8042_suspend(struct platform_device *dev, pm_message_t state)
- {
- if (dev->dev.power.power_state.event != state.event) {
-+#ifdef CONFIG_OLPC
-+ /* Anything newer than B2 remains powered; no reset needed */
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- if (state.event == PM_EVENT_SUSPEND)
- i8042_controller_reset();
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- dev->dev.power.power_state = state;
- }
-@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_
- if (dev->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- error = i8042_controller_check();
- if (error)
- return error;
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- error = i8042_controller_selftest();
- if (error)
-Index: linux-2.6.23.17/drivers/input/serio/serio.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/serio/serio.c
-+++ linux-2.6.23.17/drivers/input/serio/serio.c
-@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d
- #endif /* CONFIG_HOTPLUG */
-
- #ifdef CONFIG_PM
-+
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- static int serio_suspend(struct device *dev, pm_message_t state)
- {
- if (dev->power.power_state.event != state.event) {
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- if (state.event == PM_EVENT_SUSPEND)
- serio_cleanup(to_serio_port(dev));
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- dev->power.power_state = state;
- }
-Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c
-+++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c
-@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video");
- */
-
- #define MAX_DMA_BUFS 3
--static int alloc_bufs_at_load = 0;
--module_param(alloc_bufs_at_load, bool, 0444);
--MODULE_PARM_DESC(alloc_bufs_at_load,
-- "Non-zero value causes DMA buffers to be allocated at module "
-- "load time. This increases the chances of successfully getting "
-- "those buffers, but at the cost of nailing down the memory from "
-- "the outset.");
-+static int alloc_bufs_at_read = 0;
-+module_param(alloc_bufs_at_read, bool, 0444);
-+MODULE_PARM_DESC(alloc_bufs_at_read,
-+ "Non-zero value causes DMA buffers to be allocated when the "
-+ "video capture device is read, rather than at module load "
-+ "time. This saves memory, but decreases the chances of "
-+ "successfully getting those buffers.");
-
- static int n_dma_bufs = 3;
- module_param(n_dma_bufs, uint, 0644);
-@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct
- rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
- cafe_reg_write(cam, REG_TWSIC1, rval);
- spin_unlock_irqrestore(&cam->dev_lock, flags);
-+ mdelay(2); /* It'll probably take about 900µs anyway, and the
-+ CAFÉ is apparently quite sensitive to being poked
-+ at this point. If we can work out precisely what's
-+ going on and reduce this delay, it would be nice. */
-
- /*
- * Time to wait for the write to complete. THIS IS A RACY
-@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode
- }
- if (cam->users == 0) {
- cafe_ctlr_power_down(cam);
-- if (! alloc_bufs_at_load)
-+ if (alloc_bufs_at_read)
- cafe_free_dma_bufs(cam);
- }
- mutex_unlock(&cam->s_mutex);
-@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev
- /*
- * If so requested, try to get our DMA buffers now.
- */
-- if (alloc_bufs_at_load) {
-+ if (!alloc_bufs_at_read) {
- if (cafe_alloc_dma_bufs(cam, 1))
- cam_warn(cam, "Unable to alloc DMA buffers at load"
- " will try again later.");
-Index: linux-2.6.23.17/drivers/misc/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/misc/Kconfig
-+++ linux-2.6.23.17/drivers/misc/Kconfig
-@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY
-
- If you are not sure, say Y here.
-
-+config EEPROM_93CX6
-+ tristate "EEPROM 93CX6 support"
-+ ---help---
-+ This is a driver for the EEPROM chipsets 93c46 and 93c66.
-+ The driver supports both read as well as write commands.
-
- endif # MISC_DEVICES
-Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c
-+++ linux-2.6.23.17/drivers/mmc/host/sdhci.c
-@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd
- break;
- }
-
-+ /*
-+ * There's an off-by-one error in the hw that we need to
-+ * compensate for.
-+ */
-+ count++;
-+
- if (count >= 0xF) {
- printk(KERN_WARNING "%s: Too large timeout requested!\n",
- mmc_hostname(host->mmc));
-@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci
- if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
-- pwr = SDHCI_POWER_ON;
--
- switch (1 << power) {
- case MMC_VDD_165_195:
-- pwr |= SDHCI_POWER_180;
-+ pwr = SDHCI_POWER_180;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
-- pwr |= SDHCI_POWER_300;
-+ pwr = SDHCI_POWER_300;
- break;
- case MMC_VDD_32_33:
- case MMC_VDD_33_34:
-- pwr |= SDHCI_POWER_330;
-+ pwr = SDHCI_POWER_330;
- break;
- default:
- BUG();
-@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci
-
- writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
-
-+ pwr |= SDHCI_POWER_ON;
-+
-+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
-+
- out:
- host->power = power;
- }
-Index: linux-2.6.23.17/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/Kconfig
-@@ -288,6 +288,14 @@ config SSFDC
- This enables read only access to SmartMedia formatted NAND
- flash. You can mount it with FAT file system.
-
-+config MTD_OOPS
-+ tristate "Log panic/oops to an MTD buffer"
-+ depends on MTD
-+ help
-+ This enables panic and oops messages to be logged to a circular
-+ buffer in a flash partition where it can be read back at some
-+ later point.
-+
- source "drivers/mtd/chips/Kconfig"
-
- source "drivers/mtd/maps/Kconfig"
-Index: linux-2.6.23.17/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/Makefile
-+++ linux-2.6.23.17/drivers/mtd/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o
- obj-$(CONFIG_INFTL) += inftl.o
- obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
- obj-$(CONFIG_SSFDC) += ssfdc.o
-+obj-$(CONFIG_MTD_OOPS) += mtdoops.o
-
- nftl-objs := nftlcore.o nftlmount.o
- inftl-objs := inftlcore.o inftlmount.o
-Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(
- struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-
- /*
-- * Probing of multi-partition flash ships.
-+ * Probing of multi-partition flash chips.
- *
- * To support multiple partitions when available, we simply arrange
- * for each of them to have their own flchip structure even if they
-@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st
- return ret;
- }
-
--int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
-+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
- {
- unsigned long ofs, len;
- int ret;
-@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_
- printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
- __FUNCTION__, ofs, len);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_
- printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
- __FUNCTION__, ret);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- return ret;
-@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt
- printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
- __FUNCTION__, ofs, len);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt
- printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
- __FUNCTION__, ret);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- return ret;
-@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru
- adr = region->offset + block * len;
-
- status = cfi_varsize_frob(mtd,
-- do_getlockstatus_oneblock, adr, len, 0);
-+ do_getlockstatus_oneblock, adr, len, NULL);
- if (status)
- set_bit(block, region->lockmap);
- else
-Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st
- }
-
-
--int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
-+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
- {
- unsigned long ofs, len;
- int ret;
-Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
-@@ -70,6 +70,7 @@
-
- /* Fujitsu */
- #define MBM29F040C 0x00A4
-+#define MBM29F800BA 0x2258
- #define MBM29LV650UE 0x22D7
- #define MBM29LV320TE 0x22F6
- #define MBM29LV320BE 0x22F9
-@@ -129,6 +130,7 @@
- #define LH28F640BF 0x00b0
-
- /* ST - www.st.com */
-+#define M29F800AB 0x0058
- #define M29W800DT 0x00D7
- #define M29W800DB 0x005B
- #define M29W160DT 0x22C4
-@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec
- }
- }, {
- .mfr_id = MANUFACTURER_FUJITSU,
-+ .dev_id = MBM29F800BA,
-+ .name = "Fujitsu MBM29F800BA",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x04000,1),
-+ ERASEINFO(0x02000,2),
-+ ERASEINFO(0x08000,1),
-+ ERASEINFO(0x10000,15),
-+ }
-+ }, {
-+ .mfr_id = MANUFACTURER_FUJITSU,
- .dev_id = MBM29LV650UE,
- .name = "Fujitsu MBM29LV650UE",
- .uaddr = {
-@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x1000,256)
- }
-
-+ }, {
-+ .mfr_id = MANUFACTURER_ST,
-+ .dev_id = M29F800AB,
-+ .name = "ST M29F800AB",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x04000,1),
-+ ERASEINFO(0x02000,2),
-+ ERASEINFO(0x08000,1),
-+ ERASEINFO(0x10000,15),
-+ }
- }, {
- .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */
- .dev_id = M29W800DT,
-Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/devices/Kconfig
-@@ -69,12 +69,21 @@ config MTD_DATAFLASH26
- If you have such a board and such a DataFlash, say 'Y'.
-
- config MTD_M25P80
-- tristate "Support for M25 SPI Flash"
-+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
- depends on SPI_MASTER && EXPERIMENTAL
- help
-- This enables access to ST M25P80 and similar SPI flash chips,
-- used for program and data storage. Set up your spi devices
-- with the right board-specific platform data.
-+ This enables access to most modern SPI flash chips, used for
-+ program and data storage. Series supported include Atmel AT26DF,
-+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
-+ are supported as well. See the driver source for the current list,
-+ or to add other chips.
-+
-+ Note that the original DataFlash chips (AT45 series, not AT26DF),
-+ need an entirely different driver.
-+
-+ Set up your spi devices with the right board-specific platform data,
-+ if you want to specify device partitioning or to use a device which
-+ doesn't support the JEDEC ID instruction.
-
- config MTD_SLRAM
- tristate "Uncached system RAM"
-Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c
-+++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c
-@@ -1,5 +1,5 @@
- /*
-- * MTD SPI driver for ST M25Pxx flash chips
-+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
- *
- * Author: Mike Lavender, mike@steroidmicros.com
- *
-@@ -19,33 +19,32 @@
- #include <linux/module.h>
- #include <linux/device.h>
- #include <linux/interrupt.h>
--#include <linux/interrupt.h>
-+#include <linux/mutex.h>
-+
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
--#include <asm/semaphore.h>
--
--
--/* NOTE: AT 25F and SST 25LF series are very similar,
-- * but commands for sector erase and chip id differ...
-- */
-
- #define FLASH_PAGESIZE 256
-
- /* Flash opcodes. */
--#define OPCODE_WREN 6 /* Write enable */
--#define OPCODE_RDSR 5 /* Read status register */
--#define OPCODE_READ 3 /* Read data bytes */
--#define OPCODE_PP 2 /* Page program */
--#define OPCODE_SE 0xd8 /* Sector erase */
--#define OPCODE_RES 0xab /* Read Electronic Signature */
-+#define OPCODE_WREN 0x06 /* Write enable */
-+#define OPCODE_RDSR 0x05 /* Read status register */
-+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
-+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
-+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
-+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
- #define OPCODE_RDID 0x9f /* Read JEDEC ID */
-
- /* Status Register bits. */
- #define SR_WIP 1 /* Write in progress */
- #define SR_WEL 2 /* Write enable latch */
-+/* meaning of other SR_* bits may differ between vendors */
- #define SR_BP0 4 /* Block protect 0 */
- #define SR_BP1 8 /* Block protect 1 */
- #define SR_BP2 0x10 /* Block protect 2 */
-@@ -65,9 +64,10 @@
-
- struct m25p {
- struct spi_device *spi;
-- struct semaphore lock;
-+ struct mutex lock;
- struct mtd_info mtd;
-- unsigned partitioned;
-+ unsigned partitioned:1;
-+ u8 erase_opcode;
- u8 command[4];
- };
-
-@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *
- */
- static int erase_sector(struct m25p *flash, u32 offset)
- {
-- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id,
-- __FUNCTION__, offset);
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
-+ flash->spi->dev.bus_id, __FUNCTION__,
-+ flash->mtd.erasesize / 1024, offset);
-
- /* Wait until finished previous write command. */
- if (wait_till_ready(flash))
-@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla
- write_enable(flash);
-
- /* Set up command buffer. */
-- flash->command[0] = OPCODE_SE;
-+ flash->command[0] = flash->erase_opcode;
- flash->command[1] = offset >> 16;
- flash->command[2] = offset >> 8;
- flash->command[3] = offset;
-@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info
- addr = instr->addr;
- len = instr->len;
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-+
-+ /* REVISIT in some cases we could speed up erasing large regions
-+ * by using OPCODE_SE instead of OPCODE_BE_4K
-+ */
-
- /* now erase those sectors */
- while (len) {
- if (erase_sector(flash, addr)) {
- instr->state = MTD_ERASE_FAILED;
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
- return -EIO;
- }
-
-@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info
- len -= mtd->erasesize;
- }
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
-@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *
- if (retlen)
- *retlen = 0;
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
- return 1;
- }
-
-- /* NOTE: OPCODE_FAST_READ (if available) is faster... */
-+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
-+ * clocks; and at this writing, every chip this driver handles
-+ * supports that opcode.
-+ */
-
- /* Set up the write data buffer. */
- flash->command[0] = OPCODE_READ;
-@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *
-
- *retlen = m.actual_length - sizeof(flash->command);
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- return 0;
- }
-@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info
- t[1].tx_buf = buf;
- spi_message_add_tail(&t[1], &m);
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-
- /* Wait until finished previous write command. */
- if (wait_till_ready(flash))
-@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info
- if (retlen)
- *retlen += m.actual_length
- - sizeof(flash->command);
-- }
-- }
-+ }
-+ }
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- return 0;
- }
-@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info
-
- struct flash_info {
- char *name;
-- u8 id;
-- u16 jedec_id;
-+
-+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-+ * a high byte of zero plus three data bytes: the manufacturer id,
-+ * then a two byte device id.
-+ */
-+ u32 jedec_id;
-+
-+ /* The size listed here is what works with OPCODE_SE, which isn't
-+ * necessarily called a "sector" by the vendor.
-+ */
- unsigned sector_size;
-- unsigned n_sectors;
-+ u16 n_sectors;
-+
-+ u16 flags;
-+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
- };
-
-+
-+/* NOTE: double check command sets and memory organization when you add
-+ * more flash chips. This current list focusses on newer chips, which
-+ * have been converging on command sets which including JEDEC ID.
-+ */
- static struct flash_info __devinitdata m25p_data [] = {
-- /* REVISIT: fill in JEDEC ids, for parts that have them */
-- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
-- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
-- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
-- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
-- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
-- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
-- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
-- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
-+
-+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
-+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
-+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
-+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
-+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
-+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
-+
-+ /* Spansion -- single (large) sector size only, at least
-+ * for the chips listed here (without boot sectors).
-+ */
-+ { "s25sl004a", 0x010212, 64 * 1024, 8, },
-+ { "s25sl008a", 0x010213, 64 * 1024, 16, },
-+ { "s25sl016a", 0x010214, 64 * 1024, 32, },
-+ { "s25sl032a", 0x010215, 64 * 1024, 64, },
-+ { "s25sl064a", 0x010216, 64 * 1024, 128, },
-+
-+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
-+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
-+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
-+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
-+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
-+
-+ /* ST Microelectronics -- newer production may have feature updates */
-+ { "m25p05", 0x202010, 32 * 1024, 2, },
-+ { "m25p10", 0x202011, 32 * 1024, 4, },
-+ { "m25p20", 0x202012, 64 * 1024, 4, },
-+ { "m25p40", 0x202013, 64 * 1024, 8, },
-+ { "m25p80", 0, 64 * 1024, 16, },
-+ { "m25p16", 0x202015, 64 * 1024, 32, },
-+ { "m25p32", 0x202016, 64 * 1024, 64, },
-+ { "m25p64", 0x202017, 64 * 1024, 128, },
-+ { "m25p128", 0x202018, 256 * 1024, 64, },
-+
-+ { "m45pe80", 0x204014, 64 * 1024, 16, },
-+ { "m45pe16", 0x204015, 64 * 1024, 32, },
-+
-+ { "m25pe80", 0x208014, 64 * 1024, 16, },
-+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
-+
-+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
-+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
-+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
-+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
-+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
-+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
-+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
- };
-
-+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
-+{
-+ int tmp;
-+ u8 code = OPCODE_RDID;
-+ u8 id[3];
-+ u32 jedec;
-+ struct flash_info *info;
-+
-+ /* JEDEC also defines an optional "extended device information"
-+ * string for after vendor-specific data, after the three bytes
-+ * we use here. Supporting some chips might require using it.
-+ */
-+ tmp = spi_write_then_read(spi, &code, 1, id, 3);
-+ if (tmp < 0) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
-+ spi->dev.bus_id, tmp);
-+ return NULL;
-+ }
-+ jedec = id[0];
-+ jedec = jedec << 8;
-+ jedec |= id[1];
-+ jedec = jedec << 8;
-+ jedec |= id[2];
-+
-+ for (tmp = 0, info = m25p_data;
-+ tmp < ARRAY_SIZE(m25p_data);
-+ tmp++, info++) {
-+ if (info->jedec_id == jedec)
-+ return info;
-+ }
-+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
-+ return NULL;
-+}
-+
-+
- /*
- * board specific setup should have ensured the SPI clock used here
- * matches what the READ command supports, at least until this driver
-@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s
- unsigned i;
-
- /* Platform data helps sort out which chip type we have, as
-- * well as how this board partitions it.
-+ * well as how this board partitions it. If we don't have
-+ * a chip ID, try the JEDEC id commands; they'll work for most
-+ * newer chips, even if we don't recognize the particular chip.
- */
- data = spi->dev.platform_data;
-- if (!data || !data->type) {
-- /* FIXME some chips can identify themselves with RES
-- * or JEDEC get-id commands. Try them ...
-- */
-- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
-- spi->dev.bus_id);
-- return -ENODEV;
-- }
-+ if (data && data->type) {
-+ for (i = 0, info = m25p_data;
-+ i < ARRAY_SIZE(m25p_data);
-+ i++, info++) {
-+ if (strcmp(data->type, info->name) == 0)
-+ break;
-+ }
-
-- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) {
-- if (strcmp(data->type, info->name) == 0)
-- break;
-- }
-- if (i == ARRAY_SIZE(m25p_data)) {
-- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
-- spi->dev.bus_id, data->type);
-+ /* unrecognized chip? */
-+ if (i == ARRAY_SIZE(m25p_data)) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
-+ spi->dev.bus_id, data->type);
-+ info = NULL;
-+
-+ /* recognized; is that chip really what's there? */
-+ } else if (info->jedec_id) {
-+ struct flash_info *chip = jedec_probe(spi);
-+
-+ if (!chip || chip != info) {
-+ dev_warn(&spi->dev, "found %s, expected %s\n",
-+ chip ? chip->name : "UNKNOWN",
-+ info->name);
-+ info = NULL;
-+ }
-+ }
-+ } else
-+ info = jedec_probe(spi);
-+
-+ if (!info)
- return -ENODEV;
-- }
-
- flash = kzalloc(sizeof *flash, GFP_KERNEL);
- if (!flash)
- return -ENOMEM;
-
- flash->spi = spi;
-- init_MUTEX(&flash->lock);
-+ mutex_init(&flash->lock);
- dev_set_drvdata(&spi->dev, flash);
-
-- if (data->name)
-+ if (data && data->name)
- flash->mtd.name = data->name;
- else
- flash->mtd.name = spi->dev.bus_id;
-@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s
- flash->mtd.writesize = 1;
- flash->mtd.flags = MTD_CAP_NORFLASH;
- flash->mtd.size = info->sector_size * info->n_sectors;
-- flash->mtd.erasesize = info->sector_size;
- flash->mtd.erase = m25p80_erase;
- flash->mtd.read = m25p80_read;
- flash->mtd.write = m25p80_write;
-
-+ /* prefer "small sector" erase if possible */
-+ if (info->flags & SECT_4K) {
-+ flash->erase_opcode = OPCODE_BE_4K;
-+ flash->mtd.erasesize = 4096;
-+ } else {
-+ flash->erase_opcode = OPCODE_SE;
-+ flash->mtd.erasesize = info->sector_size;
-+ }
-+
- dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
- flash->mtd.size / 1024);
-
- DEBUG(MTD_DEBUG_LEVEL2,
-- "mtd .name = %s, .size = 0x%.8x (%uM) "
-- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n",
-+ "mtd .name = %s, .size = 0x%.8x (%uMiB) "
-+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
- flash->mtd.name,
- flash->mtd.size, flash->mtd.size / (1024*1024),
- flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s
- for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%.8x, "
-- ".erasesize = 0x%.8x (%uK), "
-+ ".erasesize = 0x%.8x (%uKiB), "
- ".numblocks = %d }\n",
- i, flash->mtd.eraseregions[i].offset,
- flash->mtd.eraseregions[i].erasesize,
-@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s
- }
-
- if (nr_parts > 0) {
-- for (i = 0; i < data->nr_parts; i++) {
-+ for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%.8x, "
-- ".size = 0x%.8x (%uK) }\n",
-- i, data->parts[i].name,
-- data->parts[i].offset,
-- data->parts[i].size,
-- data->parts[i].size / 1024);
-+ ".size = 0x%.8x (%uKiB) }\n",
-+ i, parts[i].name,
-+ parts[i].offset,
-+ parts[i].size,
-+ parts[i].size / 1024);
- }
- flash->partitioned = 1;
- return add_mtd_partitions(&flash->mtd, parts, nr_parts);
-@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver =
- },
- .probe = m25p_probe,
- .remove = __devexit_p(m25p_remove),
-+
-+ /* REVISIT: many of these chips have deep power-down modes, which
-+ * should clearly be entered on suspend() to minimize power use.
-+ * And also when they're otherwise idle...
-+ */
- };
-
-
-Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c
-+++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
-@@ -14,6 +14,7 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/device.h>
-+#include <linux/mutex.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
-@@ -89,7 +90,7 @@ struct dataflash {
- unsigned short page_offset; /* offset in flash address */
- unsigned int page_size; /* of bytes per page */
-
-- struct semaphore lock;
-+ struct mutex lock;
- struct spi_device *spi;
-
- struct mtd_info mtd;
-@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in
- x.len = 4;
- spi_message_add_tail(&x, &msg);
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
- while (instr->len > 0) {
- unsigned int pageaddr;
- int status;
-@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in
- instr->len -= priv->page_size;
- }
- }
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- /* Inform MTD subsystem that erase is complete */
- instr->state = MTD_ERASE_DONE;
-@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf
- x[1].len = len;
- spi_message_add_tail(&x[1], &msg);
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
-
- /* Continuous read, max clock = f(car) which may be less than
- * the peak rate available. Some chips support commands with
-@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf
- /* plus 4 "don't care" bytes */
-
- status = spi_sync(priv->spi, &msg);
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- if (status >= 0) {
- *retlen = msg.actual_length - 8;
-@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in
- else
- writelen = len;
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
- while (remaining > 0) {
- DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
- pageaddr, offset, writelen);
-@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in
- else
- writelen = remaining;
- }
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- return status;
- }
-@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch
- if (!priv)
- return -ENOMEM;
-
-- init_MUTEX(&priv->lock);
-+ mutex_init(&priv->lock);
- priv->spi = spi;
- priv->page_size = pagesize;
- priv->page_offset = pageoffset;
-Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c
-+++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c
-@@ -30,8 +30,8 @@
- *
- * Notes:
- * Due to what I assume is more buggy SROM, the 64M PMC551 I
-- * have available claims that all 4 of it's DRAM banks have 64M
-- * of ram configured (making a grand total of 256M onboard).
-+ * have available claims that all 4 of its DRAM banks have 64MiB
-+ * of ram configured (making a grand total of 256MiB onboard).
- * This is slightly annoying since the BAR0 size reflects the
- * aperture size, not the dram size, and the V370PDC supplies no
- * other method for memory size discovery. This problem is
-@@ -70,7 +70,7 @@
- * made the memory unusable, added a fix to code to touch up
- * the DRAM some.
- *
-- * Bugs/FIXME's:
-+ * Bugs/FIXMEs:
- * * MUST fix the init function to not spin on a register
- * waiting for it to set .. this does not safely handle busted
- * devices that never reset the register correctly which will
-@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *
- /*
- * Some screen fun
- */
-- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
-+ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
- "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
- size >> 10 : size >> 20,
-- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
-+ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
- ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
- (unsigned long long)pci_resource_start(dev, 0));
-
-@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION);
- * Stuff these outside the ifdef so as to not bust compiled in driver support
- */
- static int msize = 0;
--#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
--static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE;
--#else
- static int asize = 0;
--#endif
-
- module_param(msize, int, 0);
--MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
-+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
- module_param(asize, int, 0);
- MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
-
-@@ -799,8 +795,7 @@ static int __init init_pmc551(void)
- mtd->owner = THIS_MODULE;
-
- if (add_mtd_device(mtd)) {
-- printk(KERN_NOTICE "pmc551: Failed to register new "
-- "device\n");
-+ printk(KERN_NOTICE "pmc551: Failed to register new device\n");
- pci_iounmap(PCI_Device, priv->start);
- kfree(mtd->priv);
- kfree(mtd);
-@@ -811,13 +806,13 @@ static int __init init_pmc551(void)
- pci_dev_get(PCI_Device);
-
- printk(KERN_NOTICE "Registered pmc551 memory device.\n");
-- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
-+ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
- priv->asize >> 20,
- priv->start, priv->start + priv->asize);
-- printk(KERN_NOTICE "Total memory is %d%c\n",
-+ printk(KERN_NOTICE "Total memory is %d%sB\n",
- (length < 1024) ? length :
- (length < 1048576) ? length >> 10 : length >> 20,
-- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
-+ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
- priv->nextpmc551 = pmc551list;
- pmc551list = mtd;
- found++;
-@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void)
- pmc551list = priv->nextpmc551;
-
- if (priv->start) {
-- printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
-+ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
- "0x%p\n", priv->asize >> 20, priv->start);
- pci_iounmap(priv->dev, priv->start);
- }
-Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c
-+++ linux-2.6.23.17/drivers/mtd/maps/nettel.c
-@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti
- nettel_reboot_notifier, NULL, 0
- };
-
--/*
-- * Erase the configuration file system.
-- * Used to support the software reset button.
-- */
--static void nettel_erasecallback(struct erase_info *done)
--{
-- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-- wake_up(wait_q);
--}
--
--static struct erase_info nettel_erase;
--
--int nettel_eraseconfig(void)
--{
-- struct mtd_info *mtd;
-- DECLARE_WAITQUEUE(wait, current);
-- wait_queue_head_t wait_q;
-- int ret;
--
-- init_waitqueue_head(&wait_q);
-- mtd = get_mtd_device(NULL, 2);
-- if (!IS_ERR(mtd)) {
-- nettel_erase.mtd = mtd;
-- nettel_erase.callback = nettel_erasecallback;
-- nettel_erase.callback = NULL;
-- nettel_erase.addr = 0;
-- nettel_erase.len = mtd->size;
-- nettel_erase.priv = (u_long) &wait_q;
-- nettel_erase.priv = 0;
--
-- set_current_state(TASK_INTERRUPTIBLE);
-- add_wait_queue(&wait_q, &wait);
--
-- ret = mtd->erase(mtd, &nettel_erase);
-- if (ret) {
-- set_current_state(TASK_RUNNING);
-- remove_wait_queue(&wait_q, &wait);
-- put_mtd_device(mtd);
-- return(ret);
-- }
--
-- schedule(); /* Wait for erase to finish. */
-- remove_wait_queue(&wait_q, &wait);
--
-- put_mtd_device(mtd);
-- }
--
-- return(0);
--}
--
--#else
--
--int nettel_eraseconfig(void)
--{
-- return(0);
--}
--
- #endif
-
- /****************************************************************************/
-
--int __init nettel_init(void)
-+static int __init nettel_init(void)
- {
- volatile unsigned long *amdpar;
- unsigned long amdaddr, maxsize;
-@@ -421,10 +364,6 @@ int __init nettel_init(void)
-
- intel_mtd->owner = THIS_MODULE;
-
--#ifndef CONFIG_BLK_DEV_INITRD
-- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
--#endif
--
- num_intel_partitions = sizeof(nettel_intel_partitions) /
- sizeof(nettel_intel_partitions[0]);
-
-@@ -477,7 +416,7 @@ out_unmap2:
-
- /****************************************************************************/
-
--void __exit nettel_cleanup(void)
-+static void __exit nettel_cleanup(void)
- {
- #ifdef CONFIG_MTD_CFI_INTELEXT
- unregister_reboot_notifier(&nettel_notifier_block);
-Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c
-+++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
-@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
- rr_mtd->owner = THIS_MODULE;
-
- add_mtd_device(rr_mtd);
-- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index);
-
- return 0;
- }
-Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c
-+++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
-@@ -24,10 +24,9 @@
- #include <linux/kthread.h>
- #include <asm/uaccess.h>
-
--static LIST_HEAD(blktrans_majors);
-+#include "mtdcore.h"
-
--extern struct mutex mtd_table_mutex;
--extern struct mtd_info *mtd_table[];
-+static LIST_HEAD(blktrans_majors);
-
- struct mtd_blkcore_priv {
- struct task_struct *thread;
-@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *
- }
- }
-
--struct block_device_operations mtd_blktrans_ops = {
-+static struct block_device_operations mtd_blktrans_ops = {
- .owner = THIS_MODULE,
- .open = blktrans_open,
- .release = blktrans_release,
-Index: linux-2.6.23.17/drivers/mtd/mtdchar.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c
-+++ linux-2.6.23.17/drivers/mtd/mtdchar.c
-@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode
-
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
-
-- if (mtd->sync)
-+ /* Only sync if opened RW */
-+ if ((file->f_mode & 2) && mtd->sync)
- mtd->sync(mtd);
-
- put_mtd_device(mtd);
-Index: linux-2.6.23.17/drivers/mtd/mtdcore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c
-+++ linux-2.6.23.17/drivers/mtd/mtdcore.c
-@@ -22,6 +22,8 @@
-
- #include <linux/mtd/mtd.h>
-
-+#include "mtdcore.h"
-+
- /* These are exported solely for the purpose of mtd_blkdevs.c. You
- should not use them for _anything_ else */
- DEFINE_MUTEX(mtd_table_mutex);
-Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/nand/Kconfig
-@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC
-
- config MTD_NAND_NDFC
- tristate "NDFC NanD Flash Controller"
-- depends on 44x
-+ depends on 4xx
- select MTD_NAND_ECC_SMC
- help
-- NDFC Nand Flash Controllers are integrated in EP44x SoCs
-+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
- config MTD_NAND_S3C2410_CLKSTOP
- bool "S3C2410 NAND IDLE clock stop"
-@@ -237,7 +237,7 @@ config MTD_NAND_CAFE
- select REED_SOLOMON
- select REED_SOLOMON_DEC16
- help
-- Use NAND flash attached to the CAFÉ chip designed for the $100
-+ Use NAND flash attached to the CAFÉ chip designed for the OLPC
- laptop.
-
- config MTD_NAND_CS553X
-Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c
-+++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
-@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb
-
- MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
-
-+static int cafe_nand_resume(struct pci_dev *pdev)
-+{
-+ uint32_t timing1, timing2, timing3;
-+ uint32_t ctrl;
-+ struct mtd_info *mtd = pci_get_drvdata(pdev);
-+ struct cafe_priv *cafe = mtd->priv;
-+
-+ timing1 = timing2 = timing3 = 0xffffffff;
-+ /* Start off by resetting the NAND controller completely */
-+ cafe_writel(cafe, 1, NAND_RESET);
-+ cafe_writel(cafe, 0, NAND_RESET);
-+ cafe_writel(cafe, timing1, NAND_TIMING1);
-+ cafe_writel(cafe, timing2, NAND_TIMING2);
-+ cafe_writel(cafe, timing3, NAND_TIMING3);
-+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
-+
-+ /* Disable master reset, enable NAND clock */
-+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
-+ ctrl &= 0xffffeff0;
-+ ctrl |= 0x00007000;
-+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
-+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
-+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
-+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
-+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
-+
-+ /* Set up DMA address */
-+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
-+ if (sizeof(cafe->dmaaddr) > 4)
-+ /* Shift in two parts to shut the compiler up */
-+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
-+ else
-+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
-+
-+ /* Enable NAND IRQ in global IRQ mask register */
-+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
-+ return 0;
-+}
-+
- static struct pci_driver cafe_nand_pci_driver = {
- .name = "CAFÉ NAND",
- .id_table = cafe_nand_tbl,
- .probe = cafe_nand_probe,
- .remove = __devexit_p(cafe_nand_remove),
-+ .resume = cafe_nand_resume,
- #ifdef CONFIG_PMx
- .suspend = cafe_nand_suspend,
-- .resume = cafe_nand_resume,
- #endif
- };
-
-Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c
-+++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c
-@@ -24,7 +24,11 @@
- #include <linux/platform_device.h>
-
- #include <asm/io.h>
-+#ifdef CONFIG_40x
-+#include <asm/ibm405.h>
-+#else
- #include <asm/ibm44x.h>
-+#endif
-
- struct ndfc_nand_mtd {
- struct mtd_info mtd;
-@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo
- struct ndfc_controller *ndfc = &ndfc_ctrl;
- unsigned long long phys = settings->ndfc_erpn | res->start;
-
-+#ifndef CONFIG_PHYS_64BIT
-+ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1);
-+#else
- ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
-+#endif
- if (!ndfc->ndfcbase) {
- printk(KERN_ERR "NDFC: ioremap failed\n");
- return -EIO;
-Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig
-@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
-
- OTP block is fully-guaranteed to be a valid block.
-
-+config MTD_ONENAND_2X_PROGRAM
-+ bool "OneNAND 2X program support"
-+ help
-+ The 2X Program is an extension of Program Operation.
-+ Since the device is equipped with two DataRAMs, and two-plane NAND
-+ Flash memory array, these two component enables simultaneous program
-+ of 4KiB. Plane1 has only even blocks such as block0, block2, block4
-+ while Plane2 has only odd blocks such as block1, block3, block5.
-+ So MTD regards it as 4KiB page size and 256KiB block size
-+
-+ Now the following chips support it. (KFXXX16Q2M)
-+ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
-+ Mux: KFM2G16Q2M, KFN4G16Q2M,
-+
-+ And more recent chips
-+
-+config MTD_ONENAND_SIM
-+ tristate "OneNAND simulator support"
-+ depends on MTD_PARTITIONS
-+ help
-+ The simulator may simulate various OneNAND flash chips for the
-+ OneNAND MTD layer.
-+
- endif # MTD_ONENAND
-Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile
-+++ linux-2.6.23.17/drivers/mtd/onenand/Makefile
-@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
- # Board specific.
- obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
-
-+# Simulator
-+obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
-+
- onenand-objs = onenand_base.o onenand_bbt.o
-Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c
-+++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
-@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in
- default:
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
-+
-+ if (ONENAND_IS_2PLANE(this)) {
-+ /* Make the even block number */
-+ block &= ~1;
-+ /* Is it the odd plane? */
-+ if (addr & this->writesize)
-+ block++;
-+ page >>= 1;
-+ }
- page &= this->page_mask;
- break;
- }
-@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in
- value = onenand_bufferram_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
-
-- /* Switch to the next data buffer */
-- ONENAND_SET_NEXT_BUFFERRAM(this);
-+ if (ONENAND_IS_2PLANE(this))
-+ /* It is always BufferRAM0 */
-+ ONENAND_SET_BUFFERRAM0(this);
-+ else
-+ /* Switch to the next data buffer */
-+ ONENAND_SET_NEXT_BUFFERRAM(this);
-
- return 0;
- }
-@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in
- break;
-
- default:
-+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
-+ cmd = ONENAND_CMD_2X_PROG;
- dataram = ONENAND_CURRENT_BUFFERRAM(this);
- break;
- }
-@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs
- struct onenand_chip *this = mtd->priv;
-
- if (ONENAND_CURRENT_BUFFERRAM(this)) {
-+ /* Note: the 'this->writesize' is a real page size */
- if (area == ONENAND_DATARAM)
-- return mtd->writesize;
-+ return this->writesize;
- if (area == ONENAND_SPARERAM)
- return mtd->oobsize;
- }
-@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc
- }
-
- /**
-+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
-+ * @param mtd MTD data structure
-+ * @param addr address to check
-+ * @return blockpage address
-+ *
-+ * Get blockpage address at 2x program mode
-+ */
-+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
-+{
-+ struct onenand_chip *this = mtd->priv;
-+ int blockpage, block, page;
-+
-+ /* Calculate the even block number */
-+ block = (int) (addr >> this->erase_shift) & ~1;
-+ /* Is it the odd plane? */
-+ if (addr & this->writesize)
-+ block++;
-+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
-+ blockpage = (block << 7) | page;
-+
-+ return blockpage;
-+}
-+
-+/**
- * onenand_check_bufferram - [GENERIC] Check BufferRAM information
- * @param mtd MTD data structure
- * @param addr address to check
-@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc
- int blockpage, found = 0;
- unsigned int i;
-
-- blockpage = (int) (addr >> this->page_shift);
-+ if (ONENAND_IS_2PLANE(this))
-+ blockpage = onenand_get_2x_blockpage(mtd, addr);
-+ else
-+ blockpage = (int) (addr >> this->page_shift);
-
- /* Is there valid data? */
- i = ONENAND_CURRENT_BUFFERRAM(this);
-@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str
- int blockpage;
- unsigned int i;
-
-- blockpage = (int) (addr >> this->page_shift);
-+ if (ONENAND_IS_2PLANE(this))
-+ blockpage = onenand_get_2x_blockpage(mtd, addr);
-+ else
-+ blockpage = (int) (addr >> this->page_shift);
-
- /* Invalidate another BufferRAM */
- i = ONENAND_NEXT_BUFFERRAM(this);
-@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info
- int read = 0, column;
- int thislen;
- int ret = 0, boundary = 0;
-+ int writesize = this->writesize;
-
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-
-@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info
- /* Do first load to bufferRAM */
- if (read < len) {
- if (!onenand_check_bufferram(mtd, from)) {
-- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
- }
- }
-
-- thislen = min_t(int, mtd->writesize, len - read);
-- column = from & (mtd->writesize - 1);
-- if (column + thislen > mtd->writesize)
-- thislen = mtd->writesize - column;
-+ thislen = min_t(int, writesize, len - read);
-+ column = from & (writesize - 1);
-+ if (column + thislen > writesize)
-+ thislen = writesize - column;
-
- while (!ret) {
- /* If there is more to load then start next load */
- from += thislen;
- if (read + thislen < len) {
-- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
- /*
- * Chip boundary handling in DDP
- * Now we issued chip 1 read and pointed chip 1
-@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info
- this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
- buf += thislen;
-- thislen = min_t(int, mtd->writesize, len - read);
-+ thislen = min_t(int, writesize, len - read);
- column = 0;
- cond_resched();
- /* Now wait for load */
-@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info
- /* Read more? */
- if (read < len) {
- /* Update Page size */
-- from += mtd->writesize;
-+ from += this->writesize;
- column = 0;
- }
- }
-@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf
- int thislen, column;
-
- while (len != 0) {
-- thislen = min_t(int, mtd->writesize, len);
-- column = addr & (mtd->writesize - 1);
-- if (column + thislen > mtd->writesize)
-- thislen = mtd->writesize - column;
-+ thislen = min_t(int, this->writesize, len);
-+ column = addr & (this->writesize - 1);
-+ if (column + thislen > this->writesize)
-+ thislen = this->writesize - column;
-
-- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
-
- onenand_update_bufferram(mtd, addr, 0);
-
-@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info
-
- /* In partial page write we don't update bufferram */
- onenand_update_bufferram(mtd, to, !ret && !subpage);
-+ if (ONENAND_IS_2PLANE(this)) {
-+ ONENAND_SET_BUFFERRAM1(this);
-+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
-+ }
-
- if (ret) {
- printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
-@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m
- this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
-
- onenand_update_bufferram(mtd, to, 0);
-+ if (ONENAND_IS_2PLANE(this)) {
-+ ONENAND_SET_BUFFERRAM1(this);
-+ onenand_update_bufferram(mtd, to + this->writesize, 0);
-+ }
-
- ret = this->wait(mtd, FL_WRITING);
- if (ret) {
-@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st
- *
- * Check and set OneNAND features
- * - lock scheme
-+ * - two plane
- */
- static void onenand_check_features(struct mtd_info *mtd)
- {
-@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc
- process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
-
- /* Lock scheme */
-- if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
-+ switch (density) {
-+ case ONENAND_DEVICE_DENSITY_4Gb:
-+ this->options |= ONENAND_HAS_2PLANE;
-+
-+ case ONENAND_DEVICE_DENSITY_2Gb:
-+ /* 2Gb DDP don't have 2 plane */
-+ if (!ONENAND_IS_DDP(this))
-+ this->options |= ONENAND_HAS_2PLANE;
-+ this->options |= ONENAND_HAS_UNLOCK_ALL;
-+
-+ case ONENAND_DEVICE_DENSITY_1Gb:
- /* A-Die has all block unlock */
-- if (process) {
-- printk(KERN_DEBUG "Chip support all block unlock\n");
-+ if (process)
- this->options |= ONENAND_HAS_UNLOCK_ALL;
-- }
-- } else {
-- /* Some OneNAND has continues lock scheme */
-- if (!process) {
-- printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
-+ break;
-+
-+ default:
-+ /* Some OneNAND has continuous lock scheme */
-+ if (!process)
- this->options |= ONENAND_HAS_CONT_LOCK;
-- }
-+ break;
- }
-+
-+ if (this->options & ONENAND_HAS_CONT_LOCK)
-+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
-+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
-+ printk(KERN_DEBUG "Chip support all block unlock\n");
-+ if (this->options & ONENAND_HAS_2PLANE)
-+ printk(KERN_DEBUG "Chip has 2 plane\n");
- }
-
- /**
-@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info
- this->erase_shift = ffs(mtd->erasesize) - 1;
- this->page_shift = ffs(mtd->writesize) - 1;
- this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
-+ /* It's real page size */
-+ this->writesize = mtd->writesize;
-
- /* REVIST: Multichip handling */
-
-@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info
- /* Check OneNAND features */
- onenand_check_features(mtd);
-
-+ /*
-+ * We emulate the 4KiB page and 256KiB erase block size
-+ * But oobsize is still 64 bytes.
-+ * It is only valid if you turn on 2X program support,
-+ * Otherwise it will be ignored by compiler.
-+ */
-+ if (ONENAND_IS_2PLANE(this)) {
-+ mtd->writesize <<= 1;
-+ mtd->erasesize <<= 1;
-+ }
-+
- return 0;
- }
-
-Index: linux-2.6.23.17/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/pci/quirks.c
-+++ linux-2.6.23.17/drivers/pci/quirks.c
-@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
-
- /*
-+ * According to Tom Sylla, the Geode does not support PCI power management
-+ * transition, so we shouldn't need the D3hot delay.
-+ */
-+static void __init quirk_geode_pci_pm(struct pci_dev *dev)
-+{
-+ pci_pm_d3_delay = 0;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
-+
-+/*
- * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
- * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
- * Re-allocate the region if needed...
-Index: linux-2.6.23.17/drivers/video/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/Kconfig
-+++ linux-2.6.23.17/drivers/video/Kconfig
-@@ -594,7 +594,7 @@ config FB_TGA
-
- config FB_VESA
- bool "VESA VGA graphics support"
-- depends on (FB = y) && X86
-+ depends on (FB = y) && X86 && !VGA_NOPROBE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH
-
- config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
-- depends on FB && EXPERIMENTAL && PCI && X86
-+ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
- select AGP
- select AGP_INTEL
- select FB_MODE_HELPERS
-@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL
-
- config FB_SIS
- tristate "SiS/XGI display support"
-- depends on FB && PCI
-+ depends on FB && PCI && !VGA_NOPROBE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M
- The default value can be overridden on the kernel command line
- using the "ps3fb" option (e.g. "ps3fb=9M");
-
-+config FB_OLPC_DCON
-+ tristate "One Laptop Per Child Display CONtroller support"
-+ depends on OLPC
-+ select I2C
-+ ---help---
-+ Add support for the OLPC DCON controller. This controller is only
-+ available on OLPC platforms. Unless you have one of these
-+ platforms, you will want to say 'N'.
-+
- config FB_XILINX
- tristate "Xilinx frame buffer support"
- depends on FB && XILINX_VIRTEX
-Index: linux-2.6.23.17/drivers/video/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/Makefile
-+++ linux-2.6.23.17/drivers/video/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
- obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
- obj-$(CONFIG_FB_PS3) += ps3fb.o
- obj-$(CONFIG_FB_SM501) += sm501fb.o
-+obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o
- obj-$(CONFIG_FB_XILINX) += xilinxfb.o
- obj-$(CONFIG_FB_OMAP) += omap/
-
-Index: linux-2.6.23.17/drivers/video/fbmem.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/fbmem.c
-+++ linux-2.6.23.17/drivers/video/fbmem.c
-@@ -820,6 +820,53 @@ static void try_to_load(int fb)
- #endif /* CONFIG_KMOD */
-
- int
-+fb_powerup(struct fb_info *info)
-+{
-+ int ret = 0;
-+
-+ if (!info || info->state == FBINFO_STATE_RUNNING)
-+ return 0;
-+
-+ if (info->fbops->fb_powerup)
-+ ret = info->fbops->fb_powerup(info);
-+
-+ if (!ret) {
-+ acquire_console_sem();
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+ }
-+
-+ return ret;
-+}
-+
-+int
-+fb_powerdown(struct fb_info *info)
-+{
-+ int ret = 0;
-+
-+ if (!info || info->state == FBINFO_STATE_SUSPENDED)
-+ return 0;
-+
-+ /* Tell everybody that the fbdev is going down */
-+ acquire_console_sem();
-+ fb_set_suspend(info, 1);
-+ release_console_sem();
-+
-+ if (info->fbops->fb_powerdown)
-+ ret = info->fbops->fb_powerdown(info);
-+
-+ /* If the power down failed, then un-notify */
-+
-+ if (ret) {
-+ acquire_console_sem();
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+ }
-+
-+ return ret;
-+}
-+
-+int
- fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
- {
- struct fb_fix_screeninfo *fix = &info->fix;
-Index: linux-2.6.23.17/drivers/video/geode/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/Makefile
-+++ linux-2.6.23.17/drivers/video/geode/Makefile
-@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
- obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
-
- gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
--gxfb-objs := gxfb_core.o display_gx.o video_gx.o
-+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
- lxfb-objs := lxfb_core.o lxfb_ops.o
-Index: linux-2.6.23.17/drivers/video/geode/display_gx.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c
-+++ linux-2.6.23.17/drivers/video/geode/display_gx.c
-@@ -11,26 +11,44 @@
- * Free Software Foundation; either version 2 of the License, or * (at your
- * option) any later version.
- */
-+
-+#include <linux/kernel.h>
- #include <linux/spinlock.h>
- #include <linux/fb.h>
- #include <linux/delay.h>
- #include <asm/io.h>
- #include <asm/div64.h>
- #include <asm/delay.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "display_gx.h"
-
--#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
--unsigned int gx_frame_buffer_size(void)
-+static inline void rmwl(u32 val, u32 *reg)
- {
-- return CONFIG_FB_GEODE_GX_FBSIZE;
-+ u32 in = readl(reg);
-+ if (in != val)
-+ writel(val, reg);
- }
--#else
-+
- unsigned int gx_frame_buffer_size(void)
- {
- unsigned int val;
-
-+#ifdef CONFIG_OLPC
-+ if (machine_is_olpc() && !olpc_has_vsa()) {
-+ u32 hi,lo;
-+ rdmsr(GLIU0_P2D_RO0, lo, hi);
-+
-+ /* Top page number */
-+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
-+
-+ val -= (lo & 0x000fffff); /* Subtract bottom page number */
-+ val += 1; /* Adjust page count */
-+ return (val << 12);
-+ }
-+#endif
-+
- /* FB size is reported by a virtual register */
- /* Virtual register class = 0x02 */
- /* VG_MEM_SIZE(512Kb units) = 0x00 */
-@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
- val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
- return (val << 19);
- }
--#endif
-
- int gx_line_delta(int xres, int bpp)
- {
-@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
- gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
- dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
-
-- /* Disable the timing generator. */
-- dcfg &= ~(DC_DCFG_TGEN);
-- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
--
-- /* Wait for pending memory requests before disabling the FIFO load. */
-- udelay(100);
--
-- /* Disable FIFO load and compression. */
-- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
--
-- /* Setup DCLK and its divisor. */
-- par->vid_ops->set_dclk(info);
--
-- /*
-- * Setup new mode.
-- */
-+ /* Programming the clock is costly and ugly, so avoid if if we can */
-+
-+ if (par->curdclk != info->var.pixclock) {
-+ /* Disable the timing generator. */
-+ dcfg &= ~(DC_DCFG_TGEN);
-+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-+
-+ /* Wait for pending memory requests before disabling the FIFO load. */
-+ udelay(100);
-+
-+ /* Disable FIFO load and compression. */
-+ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
-+
-+ /* Setup DCLK and its divisor. */
-+ par->vid_ops->set_dclk(info);
-+ }
-
- /* Clear all unused feature bits. */
- gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
-@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
- gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
-
- /* Framebuffer start offset. */
-- writel(0, par->dc_regs + DC_FB_ST_OFFSET);
-+ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
-
- /* Line delta and line buffer length. */
-- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-- par->dc_regs + DC_LINE_SIZE);
-+ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-+
-+ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-+ par->dc_regs + DC_LINE_SIZE);
-
-
- /* Enable graphics and video data and unmask address lines. */
-@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
- vblankend = vsyncend + info->var.upper_margin;
- vtotal = vblankend;
-
-- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
-- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
--
-- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
-- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
-+ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
-+ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-+ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
-+ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
-+ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-+ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
-
- /* Write final register values. */
-- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
-+ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-+ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
-
- par->vid_ops->configure_display(info);
-
-Index: linux-2.6.23.17/drivers/video/geode/display_gx.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h
-+++ linux-2.6.23.17/drivers/video/geode/display_gx.h
-@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
- #define GLD_MSR_CONFIG 0xC0002001
- #define GLD_MSR_CONFIG_DM_FP 0x40
-
-+/* Used for memory dection on the OLPC */
-+#define GLIU0_P2D_RO0 0x10000029
-+
- /* Display controller registers */
-
- #define DC_UNLOCK 0x00
-Index: linux-2.6.23.17/drivers/video/geode/geodefb.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h
-+++ linux-2.6.23.17/drivers/video/geode/geodefb.h
-@@ -12,6 +12,10 @@
- #ifndef __GEODEFB_H__
- #define __GEODEFB_H__
-
-+#define FB_POWER_STATE_OFF 0
-+#define FB_POWER_STATE_SUSPEND 1
-+#define FB_POWER_STATE_ON 2
-+
- struct geodefb_info;
-
- struct geode_dc_ops {
-@@ -21,18 +25,24 @@ struct geode_dc_ops {
-
- struct geode_vid_ops {
- void (*set_dclk)(struct fb_info *);
-+ unsigned int (*get_dclk)(struct fb_info *);
- void (*configure_display)(struct fb_info *);
- int (*blank_display)(struct fb_info *, int blank_mode);
- };
-
- struct geodefb_par {
- int enable_crt;
-+ int fbactive; /* True if the current console is in KD_GRAPHICS mode */
- int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
- int panel_y;
-+ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */
- void __iomem *dc_regs;
- void __iomem *vid_regs;
-+ void __iomem *gp_regs;
- struct geode_dc_ops *dc_ops;
- struct geode_vid_ops *vid_ops;
-+
-+ int state;
- };
-
- #endif /* !__GEODEFB_H__ */
-Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c
-+++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c
-@@ -30,12 +30,31 @@
- #include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/notifier.h>
-+#include <linux/vt_kern.h>
-+#include <linux/console.h>
-+#include <asm/uaccess.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "display_gx.h"
- #include "video_gx.h"
-
-+#define FBIOSGAMMA _IOW('F', 0x20, void *)
-+#define FBIOGGAMMA _IOW('F', 0x21, void *)
-+
-+#ifdef DEBUG
-+
-+#define FBIODUMPGP _IOW('F', 0x22, void *)
-+#define FBIODUMPDC _IOW('F', 0x23, void *)
-+#define FBIODUMPVP _IOW('F', 0x24, void *)
-+#define FBIODUMPFP _IOW('F', 0x25, void *)
-+
-+#endif
-+
- static char *mode_option;
-+static int noclear;
-+struct fb_info *gxfb_info;
-
- /* Modes relevant to the GX (taken from modedb.c) */
- static const struct fb_videomode gx_modedb[] __initdata = {
-@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
- { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1200x900-75 - CRT timings for the OLPC mode */
-+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
- };
-
-+#ifdef CONFIG_OLPC
-+static const struct fb_videomode gx_dcon_modedb[] __initdata = {
-+ /* The only mode the DCON has is 1200x900 */
-+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
-+};
-+#endif
-+
-+
- static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- {
- if (var->xres > 1600 || var->yres > 1200)
-@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
- return 0;
- }
-
--static int gxfb_set_par(struct fb_info *info)
-+int gxfb_set_par(struct fb_info *info)
- {
- struct geodefb_par *par = info->par;
-
-@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
- return par->vid_ops->blank_display(info, blank_mode);
- }
-
-+static int fbsize;
-+
- static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
- {
- struct geodefb_par *par = info->par;
-- int fb_len;
- int ret;
-
- ret = pci_enable_device(dev);
- if (ret < 0)
- return ret;
-
-+ ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
-+ if (ret < 0)
-+ return ret;
-+
-+ par->gp_regs = ioremap(pci_resource_start(dev, 1),
-+ pci_resource_len(dev, 1));
-+ if (!par->gp_regs)
-+ return -ENOMEM;
-+
- ret = pci_request_region(dev, 3, "gxfb (video processor)");
- if (ret < 0)
- return ret;
-@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
- ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
- if (ret < 0)
- return ret;
-- if ((fb_len = gx_frame_buffer_size()) < 0)
-- return -ENOMEM;
-+
-+ /* If the fbsize wasn't specified then try to probe it */
-+
-+ if (!fbsize) {
-+ fbsize = gx_frame_buffer_size();
-+ if (fbsize == 0)
-+ return -ENOMEM;
-+ }
-+
- info->fix.smem_start = pci_resource_start(dev, 0);
-- info->fix.smem_len = fb_len;
-+ info->fix.smem_len = fbsize;
- info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
- if (!info->screen_base)
- return -ENOMEM;
-
-- /* Set the 16MB aligned base address of the graphics memory region
-+ /* Set the 16MiB aligned base address of the graphics memory region
- * in the display controller */
-
- writel(info->fix.smem_start & 0xFF000000,
- par->dc_regs + DC_GLIU0_MEM_OFFSET);
-
-- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
-+ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
- info->fix.smem_len / 1024, info->fix.smem_start);
-
- return 0;
- }
-
-+static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ unsigned int gamma[GXFB_GAMMA_DWORDS];
-+ int ret = -EINVAL;
-+ struct geodefb_par *par = info->par;
-+ int i;
-+
-+ switch(cmd) {
-+ case FBIOSGAMMA:
-+ /* Read the gamma information from the user - 256 dwords */
-+
-+ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
-+ return -EFAULT;
-+
-+ writel(0, par->vid_regs + GX_GAR);
-+
-+ /* Sequential writes to the data register will increment the
-+ address automatically */
-+
-+ for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
-+ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
-+
-+ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
-+ par->vid_regs + GX_MISC);
-+
-+ ret = 0;
-+ break;
-+
-+ case FBIOGGAMMA:
-+ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
-+ return -EINVAL;
-+
-+ memset(gamma, 0, GXFB_GAMMA_SIZE);
-+ writel(0, par->vid_regs + GX_GAR);
-+
-+ for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
-+ gamma[i] = readl(par->vid_regs + GX_GDR);
-+
-+ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
-+ ret = -EFAULT;
-+ else
-+ ret = 0;
-+
-+ break;
-+
-+#ifdef DEBUG
-+ case FBIODUMPGP:
-+ ret = 0;
-+ dump_regs(info, 0);
-+ break;
-+
-+ case FBIODUMPDC:
-+ ret = 0;
-+ dump_regs(info, 1);
-+ break;
-+
-+ case FBIODUMPVP:
-+ ret = 0;
-+ dump_regs(info, 2);
-+ break;
-+
-+ case FBIODUMPFP:
-+ ret = 0;
-+ dump_regs(info, 3);
-+ break;
-+#endif
-+ }
-+
-+ return ret;
-+}
-+
- static struct fb_ops gxfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = gxfb_check_var,
- .fb_set_par = gxfb_set_par,
- .fb_setcolreg = gxfb_setcolreg,
- .fb_blank = gxfb_blank,
-+ .fb_ioctl = gxfb_ioctl,
- /* No HW acceleration for now. */
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-+ .fb_powerdown = gxfb_powerdown,
-+ .fb_powerup = gxfb_powerup,
- };
-
- static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
-@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
- return info;
- }
-
--static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-+static int gxfb_console_notify(struct notifier_block *self,
-+ unsigned long action, void *data)
-+{
-+ if (gxfb_info != NULL) {
-+ struct geodefb_par *par = gxfb_info->par;
-+ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
-+ }
-+
-+ return NOTIFY_OK;
-+}
-+
-+static struct notifier_block gxfb_console_notifier = {
-+ .notifier_call = gxfb_console_notify
-+};
-+
-+#ifdef CONFIG_PM
-+
-+static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+ struct geodefb_par *par = info->par;
-+
-+ if (pdev->dev.power.power_state.event == state.event)
-+ return 0;
-+
-+ if (state.event == PM_EVENT_SUSPEND) {
-+
-+ acquire_console_sem();
-+ gxfb_powerdown(info);
-+
-+ par->state = FB_POWER_STATE_OFF;
-+ fb_set_suspend(info, 1);
-+
-+ release_console_sem();
-+ }
-+
-+ pdev->dev.power.power_state = state;
-+ return 0;
-+}
-+
-+static int gxfb_resume(struct pci_dev *pdev)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ acquire_console_sem();
-+
-+ /* Turn the engine completely on */
-+
-+ if (gxfb_powerup(info))
-+ printk(KERN_ERR "gxfb: Powerup failed\n");
-+
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+
-+ pdev->dev.power.power_state = PMSG_ON;
-+ return 0;
-+}
-+#endif
-+
-+static int __init gxfb_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id)
- {
- struct geodefb_par *par;
-- struct fb_info *info;
- int ret;
- unsigned long val;
-
-- info = gxfb_init_fbinfo(&pdev->dev);
-- if (!info)
-+ struct fb_videomode *modedb_ptr;
-+ int modedb_size;
-+
-+ gxfb_info = gxfb_init_fbinfo(&pdev->dev);
-+ if (gxfb_info == NULL)
- return -ENOMEM;
-- par = info->par;
-+
-+ par = gxfb_info->par;
-
- /* GX display controller and GX video device. */
- par->dc_ops = &gx_dc_ops;
- par->vid_ops = &gx_vid_ops;
-
-- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
-+ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
- dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
- goto err;
- }
-@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
- else
- par->enable_crt = 1;
-
-- ret = fb_find_mode(&info->var, info, mode_option,
-- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
-+ /* Get the current dotclock */
-+
-+ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
-+
-+ /* We need to determine a display mode right now, so we will
-+ * check to see if the DCON was previously detected by the BIOS
-+ * and use that to make our mode database decision.
-+ */
-+
-+ modedb_ptr = (struct fb_videomode *) gx_modedb;
-+ modedb_size = ARRAY_SIZE(gx_modedb);
-+
-+#ifdef CONFIG_OLPC
-+ if (olpc_has_dcon()) {
-+ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
-+ modedb_size = ARRAY_SIZE(gx_dcon_modedb);
-+ }
-+#endif
-+
-+ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
-+ modedb_ptr, modedb_size, NULL, 16);
-+
- if (ret == 0 || ret == 4) {
- dev_err(&pdev->dev, "could not find valid video mode\n");
- ret = -EINVAL;
- goto err;
- }
-
-+ /* Clear the screen of garbage, unless noclear was specified,
-+ * in which case we assume the user knows what he is doing */
-+
-+ if (!noclear)
-+ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
-+
-+ gxfb_check_var(&gxfb_info->var, gxfb_info);
-+ gxfb_set_par(gxfb_info);
-+
-+ /* We are powered up */
-+ par->state = FB_POWER_STATE_ON;
-
-- /* Clear the frame buffer of garbage. */
-- memset_io(info->screen_base, 0, info->fix.smem_len);
-
-- gxfb_check_var(&info->var, info);
-- gxfb_set_par(info);
-+ console_event_register(&gxfb_console_notifier);
-
-- if (register_framebuffer(info) < 0) {
-+ if (register_framebuffer(gxfb_info) < 0) {
- ret = -EINVAL;
- goto err;
- }
-- pci_set_drvdata(pdev, info);
-- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
-+ pci_set_drvdata(pdev, gxfb_info);
-+ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
- return 0;
-
- err:
-- if (info->screen_base) {
-- iounmap(info->screen_base);
-+ if (gxfb_info->screen_base) {
-+ iounmap(gxfb_info->screen_base);
- pci_release_region(pdev, 0);
- }
- if (par->vid_regs) {
-@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
- pci_release_region(pdev, 2);
- }
-
-- if (info)
-- framebuffer_release(info);
-+ if (gxfb_info)
-+ framebuffer_release(gxfb_info);
-+
- return ret;
- }
-
-@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
- }
-
- static struct pci_device_id gxfb_id_table[] = {
-- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
-- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
-- 0xff0000, 0 },
-+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
- { 0, }
- };
-
-@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
- .id_table = gxfb_id_table,
- .probe = gxfb_probe,
- .remove = gxfb_remove,
-+#ifdef CONFIG_PM
-+ .suspend = gxfb_suspend,
-+ .resume = gxfb_resume
-+#endif
- };
-
- #ifndef MODULE
--static int __init gxfb_setup(char *options)
--{
-+static int __init gxfb_setup(char *options) {
-
- char *opt;
-
- if (!options || !*options)
- return 0;
-
-- while ((opt = strsep(&options, ",")) != NULL) {
-+ while((opt = strsep(&options, ",")) != NULL) {
- if (!*opt)
- continue;
-
-- mode_option = opt;
-+ if (!strncmp(opt, "fbsize:", 7))
-+ fbsize = simple_strtoul(opt+7, NULL, 0);
-+ else if (!strcmp(opt, "noclear"))
-+ noclear = 1;
-+ else
-+ mode_option = opt;
- }
-
- return 0;
-@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
- #endif
- return pci_register_driver(&gxfb_driver);
- }
--
- static void __exit gxfb_cleanup(void)
- {
- pci_unregister_driver(&gxfb_driver);
-@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
- module_param(mode_option, charp, 0);
- MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
-
-+module_param(fbsize, int, 0);
-+MODULE_PARM_DESC(fbsize, "video memory size");
-+
- MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
- MODULE_LICENSE("GPL");
-Index: linux-2.6.23.17/drivers/video/geode/lxfb.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h
-+++ linux-2.6.23.17/drivers/video/geode/lxfb.h
-@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
- void lx_get_gamma(struct fb_info *, unsigned int *, int);
- void lx_set_gamma(struct fb_info *, unsigned int *, int);
- unsigned int lx_framebuffer_size(void);
-+int lx_shutdown(struct fb_info *);
-+int lx_powerup(struct fb_info *);
- int lx_blank_display(struct fb_info *, int);
- void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
- unsigned int, unsigned int);
-
-+
-+
-+/* ioctl() defines */
-+
-+#define FBIOSGAMMA _IOW('F', 0x20, void *)
-+#define FBIOGGAMMA _IOW('F', 0x21, void *)
-+
-+/* General definitions */
-+#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
-+#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
-+
- /* MSRS */
-
- #define MSR_LX_GLD_CONFIG 0x48002001
-Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c
-+++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c
-@@ -22,6 +22,7 @@
- #include <linux/init.h>
- #include <linux/pci.h>
- #include <linux/uaccess.h>
-+#include <asm/olpc.h>
-
- #include "lxfb.h"
-
-@@ -35,186 +36,84 @@ static int fbsize;
- */
-
- const struct fb_videomode geode_modedb[] __initdata = {
-- /* 640x480-60 */
-- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
-+ /* 640x480-60 VESA */
-+ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 640x480-75 VESA */
-+ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 640x480-85 VESA */
-+ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-60 VESA */
-+ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-75 VESA */
-+ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-85 VESA */
-+ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-60 VESA */
-+ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-75 VESA */
-+ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-85 VESA */
-+ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-60 VESA */
-+ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-85 VESA */
-+ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-60 VESA */
-+ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-75 VESA */
-+ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-85 VESA */
-+ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x400-70 */
-- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
-- FB_SYNC_HOR_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-70 */
-- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-72 */
-- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-75 */
-- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-85 */
-- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-90 */
-- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-100 */
-- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-60 */
-- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-56 */
-- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-60 */
-- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-70 */
-- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-72 */
-- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-75 */
-- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-85 */
-- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-90 */
-- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-100 */
-- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-60 */
-- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-60 */
-- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-70 */
-- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-72 */
-- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-75 */
-- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-85 */
-- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-90 */
-- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-100 */
-- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-60 */
-- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-60 */
-- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-70 */
-- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-72 */
-- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-75 */
-- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-85 */
-- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-90 */
-- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-100 */
-- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-60 */
-- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-60 */
-- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-70 */
-- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-72 */
-- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-75 */
-- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-85 */
-- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-90 */
-- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-100 */
-- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-60 */
-- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-60 */
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-60 VESA */
- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-70 */
-- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-72 */
-- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-75 */
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-75 VESA */
- { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-85 */
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-85 VESA */
- { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-90 */
-- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-100 */
-- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-60 */
-- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-60 */
-- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-70 */
-- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-72 */
-- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-75 */
-- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-85 */
-- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1200x900-75 - CRT timings for the OLPC mode */
-+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
- };
-
-+#ifdef CONFIG_OLPC
-+const struct fb_videomode olpc_dcon_modedb[] __initdata = {
-+ /* The only mode the DCON has is 1200x900 */
-+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, 0 }
-+};
-+#endif
-+
- static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- {
- if (var->xres > 1920 || var->yres > 1440)
-@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(
- return 0;
- }
-
-+static int lxfb_set_gamma(struct fb_info *info, void * __user data)
-+{
-+ unsigned int gamma[LXFB_GAMMA_DWORDS];
-+
-+ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
-+ return -EFAULT;
-+
-+ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
-+ return 0;
-+}
-+
-+static int lxfb_get_gamma(struct fb_info *info, void * __user data)
-+{
-+ unsigned int gamma[LXFB_GAMMA_DWORDS];
-+ memset(gamma, 0, sizeof(gamma));
-+
-+ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
-+
-+ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
-+ -EFAULT : 0;
-+}
-+
-+static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ switch(cmd) {
-+ case FBIOSGAMMA:
-+ return lxfb_set_gamma(info, (void * __user) arg);
-+
-+ case FBIOGGAMMA:
-+ return lxfb_get_gamma(info, (void * __user) arg);
-+ }
-+
-+ return -ENOTTY;
-+}
-+
- static struct fb_ops lxfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = lxfb_check_var,
- .fb_set_par = lxfb_set_par,
- .fb_setcolreg = lxfb_setcolreg,
- .fb_blank = lxfb_blank,
-+ .fb_ioctl = lxfb_ioctl,
- /* No HW acceleration for now. */
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-+ .fb_powerdown = lx_shutdown,
-+ .fb_powerup = lx_powerup,
- };
-
- static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
-@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init
- return info;
- }
-
-+#ifdef CONFIG_PM
-+
-+static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ if (pdev->dev.power.power_state.event == state.event)
-+ return 0;
-+
-+ if (state.event == PM_EVENT_SUSPEND) {
-+
-+ acquire_console_sem();
-+ lx_shutdown(info);
-+ fb_set_suspend(info, 1);
-+ release_console_sem();
-+ }
-+
-+ pdev->dev.power.power_state = state;
-+ return 0;
-+}
-+
-+static int lxfb_resume(struct pci_dev *pdev)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ acquire_console_sem();
-+
-+ /* Turn the engine completely on */
-+
-+ lx_powerup(info);
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+
-+ pdev->dev.power.power_state = PMSG_ON;
-+ return 0;
-+}
-+
-+#endif
-+
- static int __init lxfb_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
- {
-@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_
- modedb_ptr = (struct fb_videomode *) geode_modedb;
- modedb_size = ARRAY_SIZE(geode_modedb);
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_has_dcon()) {
-+ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
-+ modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
-+ }
-+#endif
-+
- ret = fb_find_mode(&info->var, info, mode_option,
- modedb_ptr, modedb_size, NULL, 16);
-
-@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = {
- .id_table = lxfb_id_table,
- .probe = lxfb_probe,
- .remove = lxfb_remove,
-+#ifdef CONFIG_PM
-+ .suspend = lxfb_suspend,
-+ .resume = lxfb_resume
-+#endif
- };
-
- #ifndef MODULE
-Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c
-+++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
-@@ -13,9 +13,13 @@
- #include <linux/fb.h>
- #include <linux/uaccess.h>
- #include <linux/delay.h>
-+#include <asm/olpc.h>
-
- #include "lxfb.h"
-
-+#define _GEODELX_
-+#include "geode_regs.h"
-+
- /* TODO
- * Support panel scaling
- * Add acceleration
-@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
- {
- unsigned int val;
-
-+#ifdef CONFIG_OLPC
-+ if (machine_is_olpc() && !olpc_has_vsa()) {
-+ u32 hi,lo;
-+ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
-+
-+ /* Top page number */
-+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
-+ val -= (lo & 0x000fffff); /* Subtract bottom page number */
-+ val += 1; /* Adjust page count */
-+ return (val << 12);
-+ }
-+#endif
-+
- /* The frame buffer size is reported by a VSM in VSA II */
- /* Virtual Register Class = 0x02 */
- /* VG_MEM_SIZE (1MB units) = 0x00 */
-@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
- return (val << 20);
- }
-
-+void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
-+{
-+ int i;
-+ struct lxfb_par *par = info->par;
-+
-+ writel(0, par->df_regs + DF_PAR);
-+
-+ /* Sequential writes to the data register will increment the
-+ address automatically */
-+
-+ for(i = 0; i < len; i++)
-+ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
-+
-+ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
-+ par->df_regs + DF_MISC);
-+}
-+
-+void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
-+{
-+ int i;
-+ struct lxfb_par *par = info->par;
-+
-+ writel(0, par->df_regs + DF_PAR);
-+
-+ for(i = 0; i < len;i++)
-+ gamma[i] = readl(par->df_regs + DF_PDR);
-+}
-+
- void lx_set_mode(struct fb_info *info)
- {
- struct lxfb_par *par = info->par;
-@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
- int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
-
- /* Unlock the DC registers */
-+ readl(par->dc_regs + DC_UNLOCK);
- writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
-
- lx_graphics_disable(info);
-@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf
-
- return 0;
- }
-+
-+static struct geoderegs saved_regs;
-+
-+static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct lxfb_par *par = info->par;
-+ int i;
-+
-+ /* Wait for the command buffer to empty */
-+ while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
-+
-+ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
-+ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
-+ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
-+ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
-+
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
-+ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
-+ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
-+ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
-+
-+ /* Save the palettes */
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ regs->pal[i] = readl(par->dc_regs + 0x74);
-+
-+ writel(0, par->df_regs + 0x38);
-+
-+ for(i = 0; i <= 0xFF; i++)
-+ regs->gamma[i] = readl(par->df_regs + 0x40);
-+}
-+
-+static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct lxfb_par *par = info->par;
-+ u32 val, i;
-+
-+ /* == DOTPLL == */
-+
-+ lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
-+
-+ /* MSRs */
-+
-+ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
-+
-+ /* == GP == */
-+
-+ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
-+ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
-+ writel(regs->gp.r.stride, par->gp_regs + 0x08);
-+ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
-+ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
-+ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
-+ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
-+ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
-+ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
-+ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
-+ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
-+ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
-+ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
-+ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
-+
-+ /* Writing to these registers would cause a blt to happen */
-+ /* 0x38, 0x3c, 0x40 */
-+
-+ /* Status register (0x44) is read only */
-+
-+ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
-+ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
-+ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
-+ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
-+ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
-+ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
-+ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
-+ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
-+ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
-+ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
-+
-+ /* FIXME: Restore the LUT data here */
-+
-+ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
-+
-+ /* == DC == */
-+
-+ /* Write the unlock value */
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ /* Write the palette data first */
-+
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ writel(regs->pal[i], par->dc_regs + 0x74);
-+
-+ /* MSRs */
-+ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
-+
-+ /* Write the gcfg register without the enables */
-+ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
-+
-+ /* Write the vcfg register without the enables */
-+ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
-+
-+ /* Write the rest of the active registers */
-+ writel(regs->dc.r.arb, par->dc_regs + 0x0C);
-+ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
-+ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
-+ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
-+ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
-+ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
-+ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
-+ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
-+ writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
-+ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
-+ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
-+ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
-+ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
-+ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
-+ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
-+ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
-+ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
-+ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
-+ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
-+ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
-+ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
-+ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
-+
-+ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette),
-+ 0x78 (diagnostic), and 0x7c (diagnostic)
-+ */
-+
-+ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
-+ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
-+ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88);
-+ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
-+
-+ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
-+ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
-+ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98);
-+ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C);
-+ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
-+
-+ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
-+ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
-+ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
-+ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
-+ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
-+ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
-+ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
-+
-+ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
-+ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
-+ writel(regs->dc.r.irq, par->dc_regs + 0xC8);
-+ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
-+
-+ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
-+ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
-+ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
-+
-+ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
-+ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
-+ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
-+
-+ /* == VP == */
-+
-+ /* MSR */
-+ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
-+
-+ /* Write gamma information first */
-+
-+ writel(0, par->df_regs + 0x38);
-+
-+ for(i = 0; i <= 0xFF; i++)
-+ writel((u32) regs->gamma[i], par->df_regs + 0x40);
-+
-+ /* Don't enable video yet */
-+ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00);
-+
-+ /* Don't enable the CRT yet */
-+ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08);
-+
-+ /* Write the rest of the VP registers */
-+
-+ writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
-+ writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
-+ writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
-+ writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
-+ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
-+ writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
-+ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58);
-+ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78);
-+ writel((u32) regs->vp.r.vco, par->df_regs + 0x80);
-+ writel((u32) regs->vp.r.crc, par->df_regs + 0x88);
-+ writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
-+ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
-+ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
-+ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
-+ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
-+ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
-+ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
-+ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
-+ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
-+ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
-+ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
-+ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
-+ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
-+ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
-+ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
-+ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
-+ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
-+ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
-+
-+ writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
-+ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
-+ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
-+ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
-+
-+ /* == FP == */
-+
-+ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
-+ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
-+ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
-+ writel(regs->fp.r.dca, par->df_regs + 0x448);
-+ writel(regs->fp.r.dmd, par->df_regs + 0x450);
-+ writel(regs->fp.r.crc, par->df_regs + 0x458);
-+
-+ /* Final enables */
-+
-+ val = readl(par->df_regs + 0x410);
-+
-+ /* Control the panel */
-+ if (regs->fp.r.pm & (1 << 24)) {
-+
-+ if (!(val & 0x09))
-+ writel(regs->fp.r.pm, par->df_regs + 0x410);
-+ }
-+ else {
-+ if (!(val & 0x05))
-+ writel(regs->fp.r.pm, par->df_regs + 0x410);
-+ }
-+
-+ /* Turn everything on */
-+
-+ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
-+ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
-+ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
-+ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
-+}
-+
-+static int lx_power_on = 1;
-+
-+int lx_shutdown(struct fb_info *info)
-+{
-+ struct lxfb_par *par = info->par;
-+
-+ if (lx_power_on == 0)
-+ return 0;
-+
-+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
-+ lx_save_regs(info, &saved_regs);
-+ lx_graphics_disable(info);
-+
-+ lx_power_on = 0;
-+ return 0;
-+}
-+
-+int lx_powerup(struct fb_info *info)
-+{
-+ struct lxfb_par *par = info->par;
-+
-+ if (lx_power_on == 1)
-+ return 0;
-+
-+ lx_restore_regs(info, &saved_regs);
-+ writel(0, par->dc_regs + DC_UNLOCK);
-+
-+ lx_power_on = 1;
-+ return 0;
-+}
-Index: linux-2.6.23.17/drivers/video/geode/video_gx.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c
-+++ linux-2.6.23.17/drivers/video/geode/video_gx.c
-@@ -16,10 +16,14 @@
- #include <asm/io.h>
- #include <asm/delay.h>
- #include <asm/msr.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "video_gx.h"
-+#include "display_gx.h"
-
-+/* This structure is used to store the saved registers during suspend */
-+static struct geoderegs gx_saved_regs;
-
- /*
- * Tables of register settings for various DOTCLKs.
-@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
- { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
- { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
- { 13333, 0, 0x00000052 }, /* 75.0000 */
-- { 12698, 0, 0x00000056 }, /* 78.7500 */
-+ { 12698, 0, 0x00000056 }, /* 78.7500 */
- { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
- { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
- { 10582, 0, 0x000002D2 }, /* 94.5000 */
-@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
- { 4357, 0, 0x0000057D }, /* 229.5000 */
- };
-
--static void gx_set_dclk_frequency(struct fb_info *info)
-+void gx_set_dclk_frequency(struct fb_info *info)
- {
-+ struct geodefb_par *par = info->par;
- const struct gx_pll_entry *pll_table;
- int pll_table_len;
- int i, best_i;
-@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
- do {
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
- } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
-+
-+ par->curdclk = pll_table[best_i].dotpll_value;
- }
-
--static void
--gx_configure_tft(struct fb_info *info)
-+/* Find out the current clock - we will use this information to avoid
-+ re-programming it if we don't need to */
-+
-+unsigned int gx_get_dclk(struct fb_info *info)
- {
-- struct geodefb_par *par = info->par;
-- unsigned long val;
-- unsigned long fp;
-+ const struct gx_pll_entry *pll_table;
-+ int pll_table_len;
-+ u64 dotpll;
-+ int i;
-
-- /* Set up the DF pad select MSR */
-+ if (cpu_data->x86_mask == 1) {
-+ pll_table = gx_pll_table_14MHz;
-+ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
-+ } else {
-+ pll_table = gx_pll_table_48MHz;
-+ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
-+ }
-
-- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
-- val &= ~GX_VP_PAD_SELECT_MASK;
-- val |= GX_VP_PAD_SELECT_TFT;
-- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
-+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-
-- /* Turn off the panel */
-+ for(i = 0; i < pll_table_len; i++) {
-+ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
-+ break;
-+ }
-+
-+ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
-+}
-
-- fp = readl(par->vid_regs + GX_FP_PM);
-- fp &= ~GX_FP_PM_P;
-- writel(fp, par->vid_regs + GX_FP_PM);
-
-- /* Set timing 1 */
-+#define CMP(val, mask, res) (((val) & (mask)) == (res))
-
-- fp = readl(par->vid_regs + GX_FP_PT1);
-- fp &= GX_FP_PT1_VSIZE_MASK;
-- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-- writel(fp, par->vid_regs + GX_FP_PT1);
-+static void
-+gx_configure_tft(struct fb_info *info) {
-
-- /* Timing 2 */
-- /* Set bits that are always on for TFT */
-+ struct geodefb_par *par = info->par;
-+ u32 val, fp = 0, fp1, fp2, sync = 0;
-
-- fp = 0x0F100000;
-+ /* Set up the DF pad select MSR */
-
-- /* Add sync polarity */
-+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
-+
-+ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
-+ val &= ~GX_VP_PAD_SELECT_MASK;
-+ val |= GX_VP_PAD_SELECT_TFT;
-+ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
-+ }
-
- if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-- fp |= GX_FP_PT2_VSP;
-+ sync |= GX_FP_PT2_VSP;
-
- if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-- fp |= GX_FP_PT2_HSP;
-+ sync |= GX_FP_PT2_HSP;
-
-- writel(fp, par->vid_regs + GX_FP_PT2);
-+ /* We only need to turn off the panel if something changed */
-
-- /* Set the dither control */
-- writel(0x70, par->vid_regs + GX_FP_DFC);
-+ fp1 = readl(par->vid_regs + GX_FP_PT1);
-+ fp2 = readl(par->vid_regs + GX_FP_PT2);
-+
-+ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
-+ (fp2 != (0x0F100000 | sync))) {
-+
-+ /* Turn off the panel */
-+
-+#ifdef NOTUSED
-+ /* Do we really need to turn off the panel? */
-+ /* Possibly - we have a glitch somewhere */
-
-- /* Enable the FP data and power (in case the BIOS didn't) */
-+ fp = readl(par->vid_regs + GX_FP_PM);
-+ fp &= ~GX_FP_PM_P;
-+ writel(fp, par->vid_regs + GX_FP_PM);
-+#endif
-
-- fp = readl(par->vid_regs + GX_DCFG);
-- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
-- writel(fp, par->vid_regs + GX_DCFG);
-+ /* Timing 1 */
-+ fp1 &= GX_FP_PT1_VSIZE_MASK;
-+ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-+ writel(fp, par->vid_regs + GX_FP_PT1);
-
-- /* Unblank the panel */
-+ /* Timing 2 */
-+ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
-+ }
-+
-+ /* Set the dither control */
-+ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
-+ writel(0x70, par->vid_regs + GX_FP_DFC);
-+ }
-+
-+ /* Turn on the panel */
-
- fp = readl(par->vid_regs + GX_FP_PM);
-- fp |= GX_FP_PM_P;
-- writel(fp, par->vid_regs + GX_FP_PM);
-+
-+ if (!(fp & 0x09))
-+ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
- }
-
-+#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
-+GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
-+
- static void gx_configure_display(struct fb_info *info)
- {
- struct geodefb_par *par = info->par;
-- u32 dcfg, misc;
-+ u32 dcfg, misc, sync = 0;
-
- /* Set up the MISC register */
--
- misc = readl(par->vid_regs + GX_MISC);
-
-- /* Power up the DAC */
-- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ /* We leave gamma enabled if it was already enabled.
-+ Although the hardware enables it without setting
-+ up the gamma table, the BIOS or bootloader ought
-+ to have either disabled it or loaded a table by now */
-
-- /* Disable gamma correction */
-- misc |= GX_MISC_GAM_EN;
-
-- writel(misc, par->vid_regs + GX_MISC);
-
-- /* Write the display configuration */
-- dcfg = readl(par->vid_regs + GX_DCFG);
-+ if (par->enable_crt) {
-+ /* Power up the CRT DACs */
-+ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
-+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ writel(misc, par->vid_regs + GX_MISC);
-+ }
-
-- /* Disable hsync and vsync */
-- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-- writel(dcfg, par->vid_regs + GX_DCFG);
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ sync |= GX_DCFG_CRT_HSYNC_POL;
-
-- /* Clear bits from existing mode. */
-- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
-- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
-- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ sync |= GX_DCFG_CRT_VSYNC_POL;
-+ }
-+ else {
-+ /* Turn off the CRT DACs in FP mode - we don't need them */
-+ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
-+ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ writel(misc, par->vid_regs + GX_MISC);
-+ }
-+ }
-
-- /* Set default sync skew. */
-- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
-+ /* Write the display configuration */
-+ dcfg = readl(par->vid_regs + GX_DCFG);
-
-- /* Enable hsync and vsync. */
-- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
-+ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
-+ DCFG_DEFAULT_VAL | sync)) {
-
-- /* Sync polarities. */
-- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
-- dcfg |= GX_DCFG_CRT_HSYNC_POL;
-- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
-- dcfg |= GX_DCFG_CRT_VSYNC_POL;
-+ /* Disable hsync and vsync */
-+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-+ writel(dcfg, par->vid_regs + GX_DCFG);
-
-- /* Enable the display logic */
-- /* Set up the DACS to blank normally */
-+ /* Clear bits from existing mode. */
-+ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
-+ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
-+ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-
-- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
-+ /* Set default sync skew. */
-+ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
-
-- /* Enable the external DAC VREF? */
-+ /* Enable hsync and vsync. */
-+ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
-
-- writel(dcfg, par->vid_regs + GX_DCFG);
-+ /* Enable the display logic */
-+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
-+
-+ writel(dcfg, par->vid_regs + GX_DCFG);
-+ }
-
- /* Set up the flat panel (if it is enabled) */
-
-@@ -289,6 +348,100 @@ static void gx_configure_display(struct
- gx_configure_tft(info);
- }
-
-+int gxfb_powerdown(struct fb_info *info)
-+{
-+ struct geodefb_par *par = info->par;
-+
-+ /* We're already suspended */
-+
-+ if (par->state != FB_POWER_STATE_ON)
-+ return 0;
-+
-+ /* Save the registers */
-+ gx_save_regs(info, &gx_saved_regs);
-+
-+ /* Shut down the engine */
-+
-+ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
-+ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
-+
-+ /* Turn off the flat panel unless we are attached to a DCON */
-+ if (!olpc_has_dcon())
-+ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
-+
-+ writel(0x4758, par->dc_regs + DC_UNLOCK);
-+
-+ writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
-+ par->dc_regs + DC_GENERAL_CFG);
-+
-+ writel(gx_saved_regs.dc.r.dcfg & ~0x19,
-+ par->dc_regs + DC_DISPLAY_CFG);
-+
-+ par->state = FB_POWER_STATE_SUSPEND;
-+
-+ return 0;
-+}
-+
-+int gxfb_powerup(struct fb_info *info)
-+{
-+ struct geodefb_par *par = info->par;
-+ u32 val;
-+
-+ if (par->state == FB_POWER_STATE_SUSPEND) {
-+
-+ writel(gx_saved_regs.dc.r.dcfg,
-+ par->dc_regs + DC_DISPLAY_CFG);
-+
-+ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
-+ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
-+
-+ val = readl(par->vid_regs + GX_FP_PM);
-+
-+ /* power up the panel if it needs it; we don't always power it down */
-+ if (!(val & 0x09)) {
-+ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
-+ mdelay(64);
-+ }
-+ }
-+
-+ /* If the panel is currently on its way up, then wait up to 100ms
-+ for it */
-+
-+ if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
-+ int i;
-+
-+ for(i = 0; i < 10; i++) {
-+ if (readl(par->vid_regs + GX_FP_PM) & 0x01)
-+ break;
-+
-+ mdelay(10);
-+ }
-+
-+ if (i == 10)
-+ printk(KERN_ERR "gxfb: Panel power up timed out\n");
-+ }
-+
-+ if (par->state == FB_POWER_STATE_ON)
-+ return 0;
-+
-+ switch(par->state) {
-+ case FB_POWER_STATE_OFF:
-+ gx_restore_regs(info, &gx_saved_regs);
-+ break;
-+
-+ case FB_POWER_STATE_SUSPEND:
-+ /* Do this because it will turn on the FIFO which will
-+ start the line count */
-+ writel(gx_saved_regs.dc.r.gcfg,
-+ par->dc_regs + DC_GENERAL_CFG);
-+ writel(0x0, par->dc_regs + DC_UNLOCK);
-+ break;
-+ }
-+
-+ par->state = FB_POWER_STATE_ON;
-+ return 0;
-+}
-+
- static int gx_blank_display(struct fb_info *info, int blank_mode)
- {
- struct geodefb_par *par = info->par;
-@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
- default:
- return -EINVAL;
- }
-+
- dcfg = readl(par->vid_regs + GX_DCFG);
- dcfg &= ~(GX_DCFG_DAC_BL_EN
- | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
-@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
- dcfg |= GX_DCFG_VSYNC_EN;
- writel(dcfg, par->vid_regs + GX_DCFG);
-
-- /* Power on/off flat panel. */
-+ /* Power on/off flat panel */
-
- if (par->enable_crt == 0) {
- fp_pm = readl(par->vid_regs + GX_FP_PM);
-@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
- return 0;
- }
-
-+extern struct fb_info *gxfb_info;
-+
-+/* This function controls the flatpanel power sequencing - this is used
-+ by the OLPC power management engine to enable the FP sequencing much
-+ earlier in the resume process
-+*/
-+
-+void gxfb_flatpanel_control(int state)
-+{
-+ struct geodefb_par *par = gxfb_info->par;
-+ u32 val, fp = readl(par->vid_regs + GX_FP_PM);
-+ val = fp;
-+
-+ /* Turn on the panel if it isn't aleady */
-+
-+ if (state) {
-+ if (!(val & 0x01))
-+ val |= GX_FP_PM_P;
-+ }
-+ else {
-+ if (!(val & 0x02))
-+ val &= ~GX_FP_PM_P;
-+ }
-+
-+ if (val != fp)
-+ writel(val, par->vid_regs + GX_FP_PM);
-+}
-+
- struct geode_vid_ops gx_vid_ops = {
- .set_dclk = gx_set_dclk_frequency,
-+ .get_dclk = gx_get_dclk,
- .configure_display = gx_configure_display,
- .blank_display = gx_blank_display,
- };
-Index: linux-2.6.23.17/drivers/video/geode/video_gx.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h
-+++ linux-2.6.23.17/drivers/video/geode/video_gx.h
-@@ -11,6 +11,8 @@
- #ifndef __VIDEO_GX_H__
- #define __VIDEO_GX_H__
-
-+#include "geode_regs.h"
-+
- extern struct geode_vid_ops gx_vid_ops;
-
- /* GX Flatpanel control MSR */
-@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
-
- /* Geode GX video processor registers */
-
-+#define GX_VCFG 0x0000
-+
- #define GX_DCFG 0x0008
- # define GX_DCFG_CRT_EN 0x00000001
- # define GX_DCFG_HSYNC_EN 0x00000002
-@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
- #define GX_MISC_DAC_PWRDN 0x00000400
- #define GX_MISC_A_PWRDN 0x00000800
-
-+/* Gamma correction RAM - address and data registers */
-+
-+#define GX_GAR 0x038
-+#define GX_GDR 0x040
-+
-+#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
-+#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
-+
- /* Geode GX flat panel display control registers */
-
- #define GX_FP_PT1 0x0400
-@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
- # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
- # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
-
-+int gxfb_powerdown(struct fb_info *info);
-+int gxfb_powerup(struct fb_info *info);
-+
-+void gx_set_dclk_frequency(struct fb_info *info);
-+unsigned int gx_get_dclk(struct fb_info *info);
-+
-+void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
-+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
-+
- #endif /* !__VIDEO_GX_H__ */
-Index: linux-2.6.23.17/drivers/video/modedb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/modedb.c
-+++ linux-2.6.23.17/drivers/video/modedb.c
-@@ -33,6 +33,8 @@ const char *global_mode_option;
- * Standard video mode definitions (taken from XFree86)
- */
-
-+#define DEFAULT_MODEDB_INDEX 0
-+
- static const struct fb_videomode modedb[] = {
- {
- /* 640x400 @ 70 Hz, 31.5 kHz hsync */
-@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf
- }
-
- if (!default_mode)
-- default_mode = &db[0];
-+ default_mode = (db == modedb) ?
-+ &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
-
- if (!default_bpp)
- default_bpp = 8;
-Index: linux-2.6.23.17/fs/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/fs/Kconfig
-+++ linux-2.6.23.17/fs/Kconfig
-@@ -1003,6 +1003,23 @@ config HUGETLBFS
- config HUGETLB_PAGE
- def_bool HUGETLBFS
-
-+config PROMFS_FS
-+ tristate "PromFS IEEE 1275 file system support"
-+ depends on SPARC || PPC || OLPC
-+ help
-+ PromFS is a file system interface to various IEEE-1275 compatible
-+ firmwares. If you have such a firmware (Sparc64, PowerPC, and
-+ some other architectures and embedded systems have such firmwares,
-+ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
-+ to be able to access the firmware's device-tree from Linux.
-+
-+ The firmware device-tree is available as a virtual file system,
-+ can be mounted under /prom with the command "mount -t promfs
-+ none /prom".
-+
-+ To compile PromFS support as a module, choose M here; the module
-+ will be called promfs. If unsure, choose M.
-+
- config RAMFS
- bool
- default y
-@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER
- - NOR flash with transparent ECC
- - DataFlash
-
-+config JFFS2_FS_WBUF_VERIFY
-+ bool "Verify JFFS2 write-buffer reads"
-+ depends on JFFS2_FS_WRITEBUFFER
-+ default n
-+ help
-+ This causes JFFS2 to read back every page written through the
-+ write-buffer, and check for errors.
-+
- config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
-@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
-- help
-- Zlib is designed to be a free, general-purpose, legally unencumbered,
-- lossless data-compression library for use on virtually any computer
-- hardware and operating system. See <http://www.gzip.org/zlib/> for
-- further information.
-+ help
-+ Zlib is designed to be a free, general-purpose, legally unencumbered,
-+ lossless data-compression library for use on virtually any computer
-+ hardware and operating system. See <http://www.gzip.org/zlib/> for
-+ further information.
-
-- Say 'Y' if unsure.
-+ Say 'Y' if unsure.
-
- config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
-- help
-- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-+ help
-+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
- config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
-- help
-- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-+ help
-+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
- choice
-- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-- default JFFS2_CMODE_PRIORITY
-- depends on JFFS2_FS
-- help
-- You can set here the default compression mode of JFFS2 from
-- the available compression modes. Don't touch if unsure.
-+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-+ default JFFS2_CMODE_PRIORITY
-+ depends on JFFS2_FS
-+ help
-+ You can set here the default compression mode of JFFS2 from
-+ the available compression modes. Don't touch if unsure.
-
- config JFFS2_CMODE_NONE
-- bool "no compression"
-- help
-- Uses no compression.
-+ bool "no compression"
-+ help
-+ Uses no compression.
-
- config JFFS2_CMODE_PRIORITY
-- bool "priority"
-- help
-- Tries the compressors in a predefined order and chooses the first
-- successful one.
-+ bool "priority"
-+ help
-+ Tries the compressors in a predefined order and chooses the first
-+ successful one.
-
- config JFFS2_CMODE_SIZE
-- bool "size (EXPERIMENTAL)"
-- help
-- Tries all compressors and chooses the one which has the smallest
-- result.
-+ bool "size (EXPERIMENTAL)"
-+ help
-+ Tries all compressors and chooses the one which has the smallest
-+ result.
-
- endchoice
-
-Index: linux-2.6.23.17/fs/Makefile
-===================================================================
---- linux-2.6.23.17.orig/fs/Makefile
-+++ linux-2.6.23.17/fs/Makefile
-@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
- obj-$(CONFIG_FUSE_FS) += fuse/
- obj-$(CONFIG_UDF_FS) += udf/
- obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
-+obj-$(CONFIG_PROMFS_FS) += promfs/
- obj-$(CONFIG_JFS_FS) += jfs/
- obj-$(CONFIG_XFS_FS) += xfs/
- obj-$(CONFIG_9P_FS) += 9p/
-Index: linux-2.6.23.17/fs/jffs2/background.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/background.c
-+++ linux-2.6.23.17/fs/jffs2/background.c
-@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(
- void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
- {
- spin_lock(&c->erase_completion_lock);
-- if (c->gc_task && jffs2_thread_should_wake(c))
-- send_sig(SIGHUP, c->gc_task, 1);
-+ if (c->gc_task && jffs2_thread_should_wake(c))
-+ send_sig(SIGHUP, c->gc_task, 1);
- spin_unlock(&c->erase_completion_lock);
- }
-
-Index: linux-2.6.23.17/fs/jffs2/compr.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr.c
-+++ linux-2.6.23.17/fs/jffs2/compr.c
-@@ -5,7 +5,7 @@
- * Created by Arjan van de Ven <arjanv@redhat.com>
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0
- * *datalen accordingly to show the amount of data which were compressed.
- */
- uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- unsigned char *data_in, unsigned char **cpage_out,
-- uint32_t *datalen, uint32_t *cdatalen)
-+ unsigned char *data_in, unsigned char **cpage_out,
-+ uint32_t *datalen, uint32_t *cdatalen)
- {
- int ret = JFFS2_COMPR_NONE;
-- int compr_ret;
-- struct jffs2_compressor *this, *best=NULL;
-- unsigned char *output_buf = NULL, *tmp_buf;
-- uint32_t orig_slen, orig_dlen;
-- uint32_t best_slen=0, best_dlen=0;
--
-- switch (jffs2_compression_mode) {
-- case JFFS2_COMPR_MODE_NONE:
-- break;
-- case JFFS2_COMPR_MODE_PRIORITY:
-- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-- if (!output_buf) {
-- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-- goto out;
-- }
-- orig_slen = *datalen;
-- orig_dlen = *cdatalen;
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- /* Skip decompress-only backwards-compatibility and disabled modules */
-- if ((!this->compress)||(this->disabled))
-- continue;
--
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- *datalen = orig_slen;
-- *cdatalen = orig_dlen;
-- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->usecount--;
-- if (!compr_ret) {
-- ret = this->compr;
-- this->stat_compr_blocks++;
-- this->stat_compr_orig_size += *datalen;
-- this->stat_compr_new_size += *cdatalen;
-- break;
-- }
-- }
-- spin_unlock(&jffs2_compressor_list_lock);
-- if (ret == JFFS2_COMPR_NONE) kfree(output_buf);
-- break;
-- case JFFS2_COMPR_MODE_SIZE:
-- orig_slen = *datalen;
-- orig_dlen = *cdatalen;
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- /* Skip decompress-only backwards-compatibility and disabled modules */
-- if ((!this->compress)||(this->disabled))
-- continue;
-- /* Allocating memory for output buffer if necessary */
-- if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- kfree(this->compr_buf);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->compr_buf_size=0;
-- this->compr_buf=NULL;
-- }
-- if (!this->compr_buf) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
-- spin_lock(&jffs2_compressor_list_lock);
-- if (!tmp_buf) {
-- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
-- continue;
-- }
-- else {
-- this->compr_buf = tmp_buf;
-- this->compr_buf_size = orig_dlen;
-- }
-- }
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- *datalen = orig_slen;
-- *cdatalen = orig_dlen;
-- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->usecount--;
-- if (!compr_ret) {
-- if ((!best_dlen)||(best_dlen>*cdatalen)) {
-- best_dlen = *cdatalen;
-- best_slen = *datalen;
-- best = this;
-- }
-- }
-- }
-- if (best_dlen) {
-- *cdatalen = best_dlen;
-- *datalen = best_slen;
-- output_buf = best->compr_buf;
-- best->compr_buf = NULL;
-- best->compr_buf_size = 0;
-- best->stat_compr_blocks++;
-- best->stat_compr_orig_size += best_slen;
-- best->stat_compr_new_size += best_dlen;
-- ret = best->compr;
-- }
-- spin_unlock(&jffs2_compressor_list_lock);
-- break;
-- default:
-- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
-- }
-+ int compr_ret;
-+ struct jffs2_compressor *this, *best=NULL;
-+ unsigned char *output_buf = NULL, *tmp_buf;
-+ uint32_t orig_slen, orig_dlen;
-+ uint32_t best_slen=0, best_dlen=0;
-+
-+ switch (jffs2_compression_mode) {
-+ case JFFS2_COMPR_MODE_NONE:
-+ break;
-+ case JFFS2_COMPR_MODE_PRIORITY:
-+ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-+ if (!output_buf) {
-+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-+ goto out;
-+ }
-+ orig_slen = *datalen;
-+ orig_dlen = *cdatalen;
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ /* Skip decompress-only backwards-compatibility and disabled modules */
-+ if ((!this->compress)||(this->disabled))
-+ continue;
-+
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ *datalen = orig_slen;
-+ *cdatalen = orig_dlen;
-+ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->usecount--;
-+ if (!compr_ret) {
-+ ret = this->compr;
-+ this->stat_compr_blocks++;
-+ this->stat_compr_orig_size += *datalen;
-+ this->stat_compr_new_size += *cdatalen;
-+ break;
-+ }
-+ }
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ if (ret == JFFS2_COMPR_NONE)
-+ kfree(output_buf);
-+ break;
-+ case JFFS2_COMPR_MODE_SIZE:
-+ orig_slen = *datalen;
-+ orig_dlen = *cdatalen;
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ /* Skip decompress-only backwards-compatibility and disabled modules */
-+ if ((!this->compress)||(this->disabled))
-+ continue;
-+ /* Allocating memory for output buffer if necessary */
-+ if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ kfree(this->compr_buf);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->compr_buf_size=0;
-+ this->compr_buf=NULL;
-+ }
-+ if (!this->compr_buf) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ if (!tmp_buf) {
-+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
-+ continue;
-+ }
-+ else {
-+ this->compr_buf = tmp_buf;
-+ this->compr_buf_size = orig_dlen;
-+ }
-+ }
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ *datalen = orig_slen;
-+ *cdatalen = orig_dlen;
-+ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->usecount--;
-+ if (!compr_ret) {
-+ if ((!best_dlen)||(best_dlen>*cdatalen)) {
-+ best_dlen = *cdatalen;
-+ best_slen = *datalen;
-+ best = this;
-+ }
-+ }
-+ }
-+ if (best_dlen) {
-+ *cdatalen = best_dlen;
-+ *datalen = best_slen;
-+ output_buf = best->compr_buf;
-+ best->compr_buf = NULL;
-+ best->compr_buf_size = 0;
-+ best->stat_compr_blocks++;
-+ best->stat_compr_orig_size += best_slen;
-+ best->stat_compr_new_size += best_dlen;
-+ ret = best->compr;
-+ }
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ break;
-+ default:
-+ printk(KERN_ERR "JFFS2: unknow compression mode.\n");
-+ }
- out:
-- if (ret == JFFS2_COMPR_NONE) {
-- *cpage_out = data_in;
-- *datalen = *cdatalen;
-- none_stat_compr_blocks++;
-- none_stat_compr_size += *datalen;
-- }
-- else {
-- *cpage_out = output_buf;
-- }
-+ if (ret == JFFS2_COMPR_NONE) {
-+ *cpage_out = data_in;
-+ *datalen = *cdatalen;
-+ none_stat_compr_blocks++;
-+ none_stat_compr_size += *datalen;
-+ }
-+ else {
-+ *cpage_out = output_buf;
-+ }
- return ret;
- }
-
-@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf
- uint16_t comprtype, unsigned char *cdata_in,
- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
- {
-- struct jffs2_compressor *this;
-- int ret;
-+ struct jffs2_compressor *this;
-+ int ret;
-
- /* Older code had a bug where it would write non-zero 'usercompr'
- fields. Deal with it. */
-@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf
- case JFFS2_COMPR_NONE:
- /* This should be special-cased elsewhere, but we might as well deal with it */
- memcpy(data_out, cdata_in, datalen);
-- none_stat_decompr_blocks++;
-+ none_stat_decompr_blocks++;
- break;
- case JFFS2_COMPR_ZERO:
- memset(data_out, 0, datalen);
- break;
- default:
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- if (comprtype == this->compr) {
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- if (ret) {
-- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
-- }
-- else {
-- this->stat_decompr_blocks++;
-- }
-- this->usecount--;
-- spin_unlock(&jffs2_compressor_list_lock);
-- return ret;
-- }
-- }
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ if (comprtype == this->compr) {
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ if (ret) {
-+ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
-+ }
-+ else {
-+ this->stat_decompr_blocks++;
-+ }
-+ this->usecount--;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ return ret;
-+ }
-+ }
- printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
-- spin_unlock(&jffs2_compressor_list_lock);
-+ spin_unlock(&jffs2_compressor_list_lock);
- return -EIO;
- }
- return 0;
-@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf
-
- int jffs2_register_compressor(struct jffs2_compressor *comp)
- {
-- struct jffs2_compressor *this;
-+ struct jffs2_compressor *this;
-
-- if (!comp->name) {
-- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
-- return -1;
-- }
-- comp->compr_buf_size=0;
-- comp->compr_buf=NULL;
-- comp->usecount=0;
-- comp->stat_compr_orig_size=0;
-- comp->stat_compr_new_size=0;
-- comp->stat_compr_blocks=0;
-- comp->stat_decompr_blocks=0;
-- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
--
-- spin_lock(&jffs2_compressor_list_lock);
--
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- if (this->priority < comp->priority) {
-- list_add(&comp->list, this->list.prev);
-- goto out;
-- }
-- }
-- list_add_tail(&comp->list, &jffs2_compressor_list);
-+ if (!comp->name) {
-+ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
-+ return -1;
-+ }
-+ comp->compr_buf_size=0;
-+ comp->compr_buf=NULL;
-+ comp->usecount=0;
-+ comp->stat_compr_orig_size=0;
-+ comp->stat_compr_new_size=0;
-+ comp->stat_compr_blocks=0;
-+ comp->stat_decompr_blocks=0;
-+ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
-+
-+ spin_lock(&jffs2_compressor_list_lock);
-+
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ if (this->priority < comp->priority) {
-+ list_add(&comp->list, this->list.prev);
-+ goto out;
-+ }
-+ }
-+ list_add_tail(&comp->list, &jffs2_compressor_list);
- out:
-- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-- })
-+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-+ })
-
-- spin_unlock(&jffs2_compressor_list_lock);
-+ spin_unlock(&jffs2_compressor_list_lock);
-
-- return 0;
-+ return 0;
- }
-
- int jffs2_unregister_compressor(struct jffs2_compressor *comp)
- {
-- D2(struct jffs2_compressor *this;)
-+ D2(struct jffs2_compressor *this;)
-+
-+ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
-
-- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
-+ spin_lock(&jffs2_compressor_list_lock);
-
-- spin_lock(&jffs2_compressor_list_lock);
-+ if (comp->usecount) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-+ return -1;
-+ }
-+ list_del(&comp->list);
-
-- if (comp->usecount) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-- return -1;
-- }
-- list_del(&comp->list);
--
-- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-- })
-- spin_unlock(&jffs2_compressor_list_lock);
-- return 0;
-+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-+ })
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ return 0;
- }
-
- void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
- {
-- if (orig != comprbuf)
-- kfree(comprbuf);
-+ if (orig != comprbuf)
-+ kfree(comprbuf);
- }
-
- int __init jffs2_compressors_init(void)
- {
- /* Registering compressors */
- #ifdef CONFIG_JFFS2_ZLIB
-- jffs2_zlib_init();
-+ jffs2_zlib_init();
- #endif
- #ifdef CONFIG_JFFS2_RTIME
-- jffs2_rtime_init();
-+ jffs2_rtime_init();
- #endif
- #ifdef CONFIG_JFFS2_RUBIN
-- jffs2_rubinmips_init();
-- jffs2_dynrubin_init();
-+ jffs2_rubinmips_init();
-+ jffs2_dynrubin_init();
- #endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
-- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
-+ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
- #else
- #ifdef CONFIG_JFFS2_CMODE_SIZE
-- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
-- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
-+ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
- #else
-- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
- #endif
- #endif
-- return 0;
-+ return 0;
- }
-
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
- #ifdef CONFIG_JFFS2_RUBIN
-- jffs2_dynrubin_exit();
-- jffs2_rubinmips_exit();
-+ jffs2_dynrubin_exit();
-+ jffs2_rubinmips_exit();
- #endif
- #ifdef CONFIG_JFFS2_RTIME
-- jffs2_rtime_exit();
-+ jffs2_rtime_exit();
- #endif
- #ifdef CONFIG_JFFS2_ZLIB
-- jffs2_zlib_exit();
-+ jffs2_zlib_exit();
- #endif
-- return 0;
-+ return 0;
- }
-Index: linux-2.6.23.17/fs/jffs2/compr.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr.h
-+++ linux-2.6.23.17/fs/jffs2/compr.h
-@@ -2,7 +2,7 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-@@ -32,29 +32,29 @@
- #define JFFS2_ZLIB_PRIORITY 60
-
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
--#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-+#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-
- #define JFFS2_COMPR_MODE_NONE 0
- #define JFFS2_COMPR_MODE_PRIORITY 1
- #define JFFS2_COMPR_MODE_SIZE 2
-
- struct jffs2_compressor {
-- struct list_head list;
-- int priority; /* used by prirority comr. mode */
-- char *name;
-- char compr; /* JFFS2_COMPR_XXX */
-- int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
-- uint32_t *srclen, uint32_t *destlen, void *model);
-- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
-- uint32_t cdatalen, uint32_t datalen, void *model);
-- int usecount;
-- int disabled; /* if seted the compressor won't compress */
-- unsigned char *compr_buf; /* used by size compr. mode */
-- uint32_t compr_buf_size; /* used by size compr. mode */
-- uint32_t stat_compr_orig_size;
-- uint32_t stat_compr_new_size;
-- uint32_t stat_compr_blocks;
-- uint32_t stat_decompr_blocks;
-+ struct list_head list;
-+ int priority; /* used by prirority comr. mode */
-+ char *name;
-+ char compr; /* JFFS2_COMPR_XXX */
-+ int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t *srclen, uint32_t *destlen, void *model);
-+ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
-+ uint32_t cdatalen, uint32_t datalen, void *model);
-+ int usecount;
-+ int disabled; /* if set the compressor won't compress */
-+ unsigned char *compr_buf; /* used by size compr. mode */
-+ uint32_t compr_buf_size; /* used by size compr. mode */
-+ uint32_t stat_compr_orig_size;
-+ uint32_t stat_compr_new_size;
-+ uint32_t stat_compr_blocks;
-+ uint32_t stat_decompr_blocks;
- };
-
- int jffs2_register_compressor(struct jffs2_compressor *comp);
-@@ -64,12 +64,12 @@ int jffs2_compressors_init(void);
- int jffs2_compressors_exit(void);
-
- uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- unsigned char *data_in, unsigned char **cpage_out,
-- uint32_t *datalen, uint32_t *cdatalen);
-+ unsigned char *data_in, unsigned char **cpage_out,
-+ uint32_t *datalen, uint32_t *cdatalen);
-
- int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- uint16_t comprtype, unsigned char *cdata_in,
-- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
-+ uint16_t comprtype, unsigned char *cdata_in,
-+ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
-
- void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
-
-Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c
-+++ linux-2.6.23.17/fs/jffs2/compr_rtime.c
-@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign
- }
- }
- }
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_rtime_comp = {
-Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c
-+++ linux-2.6.23.17/fs/jffs2/compr_rubin.c
-@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un
- void *model)
- {
- rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
-- return 0;
-+ return 0;
- }
-
- static int jffs2_dynrubin_decompress(unsigned char *data_in,
-@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns
- bits[c] = data_in[c];
-
- rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_rubinmips_comp = {
-Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c
-+++ linux-2.6.23.17/fs/jffs2/compr_zlib.c
-@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne
- }
- zlib_inflateEnd(&inf_strm);
- mutex_unlock(&inflate_mutex);
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_zlib_comp = {
-@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void)
-
- ret = alloc_workspaces();
- if (ret)
-- return ret;
-+ return ret;
-
- ret = jffs2_register_compressor(&jffs2_zlib_comp);
- if (ret)
-- free_workspaces();
-+ free_workspaces();
-
- return ret;
- }
-Index: linux-2.6.23.17/fs/jffs2/dir.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/dir.c
-+++ linux-2.6.23.17/fs/jffs2/dir.c
-@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s
- static int jffs2_rmdir (struct inode *,struct dentry *);
- static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
- static int jffs2_rename (struct inode *, struct dentry *,
-- struct inode *, struct dentry *);
-+ struct inode *, struct dentry *);
-
- const struct file_operations jffs2_dir_operations =
- {
-@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di
- }
-
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
-- struct inode *new_dir_i, struct dentry *new_dentry)
-+ struct inode *new_dir_i, struct dentry *new_dentry)
- {
- int ret;
- struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
-Index: linux-2.6.23.17/fs/jffs2/erase.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/erase.c
-+++ linux-2.6.23.17/fs/jffs2/erase.c
-@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff
- #ifdef __ECOS
- ret = jffs2_flash_erase(c, jeb);
- if (!ret) {
-- jffs2_erase_succeeded(c, jeb);
-- return;
-+ jffs2_erase_succeeded(c, jeb);
-+ return;
- }
- bad_offset = jeb->offset;
- #else /* Linux */
-@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff
- instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
- if (!instr) {
- printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-
-@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff
- if (ret == -ENOMEM || ret == -EAGAIN) {
- /* Erase failed immediately. Refile it on the list */
- D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-
-@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j
- jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
- list_del(&jeb->list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- jffs2_mark_erased_block(c, jeb);
-
- if (!--count) {
-@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j
- jffs2_free_jeb_node_refs(c, jeb);
- list_add(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
-
- jffs2_erase_block(c, jeb);
-
-@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j
- }
-
- /* Be nice */
-- cond_resched();
-+ yield();
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- }
-
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- done:
- D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n"));
--
-- up(&c->erase_free_sem);
- }
-
- static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
- {
- D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset));
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move_tail(&jeb->list, &c->erase_complete_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- /* Ensure that kupdated calls us again to mark them clean */
- jffs2_erase_pending_trigger(c);
- }
-@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf
- failed too many times. */
- if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
- /* We'd like to give this block another try. */
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
- }
-
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- c->erasing_size -= c->sector_size;
- c->bad_size += c->sector_size;
- list_move(&jeb->list, &c->bad_list);
- c->nr_erasing_blocks--;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- wake_up(&c->erase_wait);
- }
-
-@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc
- size_t retlen;
- int ret = -EIO;
-
-+ if (c->mtd->point) {
-+ unsigned long *wordebuf;
-+
-+ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
-+ if (ret) {
-+ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
-+ goto do_flash_read;
-+ }
-+ if (retlen < c->sector_size) {
-+ /* Don't muck about if it won't let us point to the whole erase sector */
-+ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
-+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
-+ goto do_flash_read;
-+ }
-+ wordebuf = ebuf-sizeof(*wordebuf);
-+ retlen /= sizeof(*wordebuf);
-+ do {
-+ if (*++wordebuf != ~0)
-+ break;
-+ } while(--retlen);
-+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
-+ if (retlen)
-+ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n",
-+ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
-+ return 0;
-+ }
-+ do_flash_read:
- ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!ebuf) {
- printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
-@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru
- jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
- }
-
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- c->erasing_size -= c->sector_size;
- c->free_size += jeb->free_size;
-@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru
- c->nr_erasing_blocks--;
- c->nr_free_blocks++;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- wake_up(&c->erase_wait);
- return;
-
- filebad:
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_add(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- jffs2_erase_failed(c, jeb, bad_offset);
- return;
-
- refile:
- /* Stick it back on the list from whence it came and come back later */
- jffs2_erase_pending_trigger(c);
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_add(&jeb->list, &c->erase_complete_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-Index: linux-2.6.23.17/fs/jffs2/gc.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/gc.c
-+++ linux-2.6.23.17/fs/jffs2/gc.c
-@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin
-
- node = kmalloc(rawlen, GFP_KERNEL);
- if (!node)
-- return -ENOMEM;
-+ return -ENOMEM;
-
- ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
- if (!ret && retlen != rawlen)
-@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin
-
- if (ret || (retlen != rawlen)) {
- printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
-- rawlen, phys_ofs, ret, retlen);
-+ rawlen, phys_ofs, ret, retlen);
- if (retlen) {
- jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
- } else {
-Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h
-+++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
-@@ -106,6 +106,9 @@ struct jffs2_sb_info {
-
- uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ unsigned char *wbuf_verify; /* read-back buffer for verification */
-+#endif
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- unsigned char *wbuf; /* Write-behind buffer for NAND flash */
- uint32_t wbuf_ofs;
-Index: linux-2.6.23.17/fs/jffs2/nodelist.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/nodelist.h
-+++ linux-2.6.23.17/fs/jffs2/nodelist.h
-@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *
- return ((struct jffs2_inode_cache *)raw);
- }
-
-- /* flash_offset & 3 always has to be zero, because nodes are
-+ /* flash_offset & 3 always has to be zero, because nodes are
- always aligned at 4 bytes. So we have a couple of extra bits
- to play with, which indicate the node's status; see below: */
- #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */
-@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
- #define RAWNODE_CLASS_XATTR_DATUM 1
- #define RAWNODE_CLASS_XATTR_REF 2
-
--#define INOCACHE_HASHSIZE 128
-+#define INOCACHE_HASHSIZE 1024
-
- #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
-
-Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c
-+++ linux-2.6.23.17/fs/jffs2/nodemgmt.c
-@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_
- while(ret == -EAGAIN) {
- ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
- if (ret) {
-- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
-+ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
- }
- }
- spin_unlock(&c->erase_completion_lock);
-@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy
- even after refiling c->nextblock */
- if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
- && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
-- printk(KERN_WARNING "argh. node added in wrong place\n");
-+ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3);
-+ if (c->nextblock)
-+ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset);
-+ else
-+ printk(KERN_WARNING "No nextblock");
-+ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size));
- return ERR_PTR(-EINVAL);
- }
- #endif
-Index: linux-2.6.23.17/fs/jffs2/readinode.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/readinode.c
-+++ linux-2.6.23.17/fs/jffs2/readinode.c
-@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s
- * ordering.
- *
- * Returns 0 if the node was handled (including marking it obsolete)
-- * < 0 an if error occurred
-+ * < 0 an if error occurred
- */
- static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
- struct jffs2_readinode_info *rii,
-@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf
- JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
- ref_offset(ref));
- JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
-- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
-- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
-+ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
-+ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
- jffs2_mark_node_obsolete(c, ref);
- return 0;
- }
-Index: linux-2.6.23.17/fs/jffs2/scan.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/scan.c
-+++ linux-2.6.23.17/fs/jffs2/scan.c
-@@ -877,7 +877,7 @@ scan_more:
- switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
- case JFFS2_FEATURE_ROCOMPAT:
- printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
-- c->flags |= JFFS2_SB_FLAG_RO;
-+ c->flags |= JFFS2_SB_FLAG_RO;
- if (!(jffs2_is_readonly(c)))
- return -EROFS;
- if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
-Index: linux-2.6.23.17/fs/jffs2/security.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/security.c
-+++ linux-2.6.23.17/fs/jffs2/security.c
-@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in
- }
- rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
-
-- kfree(name);
-- kfree(value);
-- return rc;
-+ kfree(name);
-+ kfree(value);
-+ return rc;
- }
-
- /* ---- XATTR Handler for "security.*" ----------------- */
-Index: linux-2.6.23.17/fs/jffs2/summary.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/summary.c
-+++ linux-2.6.23.17/fs/jffs2/summary.c
-@@ -2,10 +2,10 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * Zoltan Sogor <weth@inf.u-szeged.hu>,
-- * Patrik Kluba <pajko@halom.u-szeged.hu>,
-- * University of Szeged, Hungary
-- * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
-+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
-+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
-+ * University of Szeged, Hungary
-+ * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-Index: linux-2.6.23.17/fs/jffs2/summary.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/summary.h
-+++ linux-2.6.23.17/fs/jffs2/summary.h
-@@ -2,9 +2,9 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * Zoltan Sogor <weth@inf.u-szeged.hu>,
-- * Patrik Kluba <pajko@halom.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
-+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-Index: linux-2.6.23.17/fs/jffs2/wbuf.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/wbuf.c
-+++ linux-2.6.23.17/fs/jffs2/wbuf.c
-@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2
- return NULL;
- }
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
-+ uint32_t ofs)
-+{
-+ int ret;
-+ size_t retlen;
-+ char *eccstr;
-+
-+ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
-+ if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
-+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret);
-+ return ret;
-+ } else if (retlen != c->wbuf_pagesize) {
-+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize);
-+ return -EIO;
-+ }
-+ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize))
-+ return 0;
-+
-+ if (ret == -EUCLEAN)
-+ eccstr = "corrected";
-+ else if (ret == -EBADMSG)
-+ eccstr = "correction failed";
-+ else
-+ eccstr = "OK or unused";
-+
-+ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
-+ eccstr, c->wbuf_ofs);
-+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ c->wbuf, c->wbuf_pagesize, 0);
-+
-+ printk(KERN_WARNING "Read back:\n");
-+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ c->wbuf_verify, c->wbuf_pagesize, 0);
-+
-+ return -EIO;
-+}
-+#else
-+#define jffs2_verify_write(c,b,o) (0)
-+#endif
-+
- /* Recover from failure to write wbuf. Recover the nodes up to the
- * wbuf, not the one which we were starting to try to write. */
-
-@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf
- ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
- rewrite_buf);
-
-- if (ret || retlen != towrite) {
-+ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
- /* Argh. We tried. Really we did. */
- printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
- kfree(buf);
-@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff
-
- ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
-
-- if (ret || retlen != c->wbuf_pagesize) {
-- if (ret)
-- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret);
-- else {
-- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
-- retlen, c->wbuf_pagesize);
-- ret = -EIO;
-- }
--
-+ if (ret) {
-+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret);
-+ goto wfail;
-+ } else if (retlen != c->wbuf_pagesize) {
-+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
-+ retlen, c->wbuf_pagesize);
-+ ret = -EIO;
-+ goto wfail;
-+ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
-+ wfail:
- jffs2_wbuf_recover(c);
-
- return ret;
-@@ -966,8 +1008,8 @@ exit:
-
- #define NR_OOB_SCAN_PAGES 4
-
--/* For historical reasons we use only 12 bytes for OOB clean marker */
--#define OOB_CM_SIZE 12
-+/* For historical reasons we use only 8 bytes for OOB clean marker */
-+#define OOB_CM_SIZE 8
-
- static const struct jffs2_unknown_node oob_cleanmarker =
- {
-@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s
- /*
- * Check for a valid cleanmarker.
- * Returns: 0 if a valid cleanmarker was found
-- * 1 if no cleanmarker was found
-- * negative error code if an error occurred
-+ * 1 if no cleanmarker was found
-+ * negative error code if an error occurred
- */
- int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
- struct jffs2_eraseblock *jeb)
-@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_
- return -ENOMEM;
- }
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
-+ if (!c->wbuf_verify) {
-+ kfree(c->oobbuf);
-+ kfree(c->wbuf);
-+ return -ENOMEM;
-+ }
-+#endif
- return 0;
- }
-
- void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
- {
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ kfree(c->wbuf_verify);
-+#endif
- kfree(c->wbuf);
- kfree(c->oobbuf);
- }
-Index: linux-2.6.23.17/fs/jffs2/xattr.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/xattr.h
-+++ linux-2.6.23.17/fs/jffs2/xattr.h
-@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(
- extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
-
- extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
-- uint32_t xid, uint32_t version);
-+ uint32_t xid, uint32_t version);
-
- extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
- extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
-Index: linux-2.6.23.17/fs/jffs2/xattr_user.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c
-+++ linux-2.6.23.17/fs/jffs2/xattr_user.c
-@@ -17,7 +17,7 @@
- #include "nodelist.h"
-
- static int jffs2_user_getxattr(struct inode *inode, const char *name,
-- void *buffer, size_t size)
-+ void *buffer, size_t size)
- {
- if (!strcmp(name, ""))
- return -EINVAL;
-@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in
- }
-
- static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
-- size_t size, int flags)
-+ size_t size, int flags)
- {
- if (!strcmp(name, ""))
- return -EINVAL;
-Index: linux-2.6.23.17/include/asm-i386/geode.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-i386/geode.h
-+++ linux-2.6.23.17/include/asm-i386/geode.h
-@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(
- geode_gpio_setup_event(gpio, pair, 1);
- }
-
-+/* MFGPT */
-+
-+#define MFGPT_TIMER_ANY -1
-+
-+#define MFGPT_DOMAIN_WORKING 1
-+#define MFGPT_DOMAIN_STANDBY 2
-+#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-+
-+#define MFGPT_CMP1 0
-+#define MFGPT_CMP2 1
-+
-+#define MFGPT_EVENT_IRQ 0
-+#define MFGPT_EVENT_NMI 1
-+#define MFGPT_EVENT_RESET 3
-+
-+#define MFGPT_REG_CMP1 0
-+#define MFGPT_REG_CMP2 2
-+#define MFGPT_REG_COUNTER 4
-+#define MFGPT_REG_SETUP 6
-+
-+#define MFGPT_SETUP_CNTEN (1 << 15)
-+#define MFGPT_SETUP_CMP2 (1 << 14)
-+#define MFGPT_SETUP_CMP1 (1 << 13)
-+#define MFGPT_SETUP_SETUP (1 << 12)
-+#define MFGPT_SETUP_STOPEN (1 << 11)
-+#define MFGPT_SETUP_EXTEN (1 << 10)
-+#define MFGPT_SETUP_REVEN (1 << 5)
-+#define MFGPT_SETUP_CLKSEL (1 << 4)
-+
-+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
-+{
-+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-+ outw(value, base + reg + (timer * 8));
-+}
-+
-+static inline u16 geode_mfgpt_read(int timer, u16 reg)
-+{
-+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-+ return inw(base + reg + (timer * 8));
-+}
-+
-+extern int __init geode_mfgpt_detect(void);
-+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-+extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
-+extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner);
-+
-+#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1)
-+#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0)
-+
- /* Specific geode tests */
-
- static inline int is_geode_gx(void)
-Index: linux-2.6.23.17/include/asm-i386/setup.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-i386/setup.h
-+++ linux-2.6.23.17/include/asm-i386/setup.h
-@@ -24,6 +24,7 @@
- #define OLD_CL_BASE_ADDR 0x90000
- #define OLD_CL_OFFSET 0x90022
- #define NEW_CL_POINTER 0x228 /* Relative to real mode data */
-+#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */
-
- #ifndef __ASSEMBLY__
-
-Index: linux-2.6.23.17/include/linux/console.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/console.h
-+++ linux-2.6.23.17/include/linux/console.h
-@@ -121,14 +121,11 @@ extern void console_stop(struct console
- extern void console_start(struct console *);
- extern int is_console_locked(void);
-
--#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND
-+extern int serial_console_suspend_enabled;
-+
- /* Suspend and resume console messages over PM events */
- extern void suspend_console(void);
- extern void resume_console(void);
--#else
--static inline void suspend_console(void) {}
--static inline void resume_console(void) {}
--#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */
-
- int mda_console_init(void);
- void prom_con_init(void);
-Index: linux-2.6.23.17/include/linux/fb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/fb.h
-+++ linux-2.6.23.17/include/linux/fb.h
-@@ -664,6 +664,12 @@ struct fb_ops {
- /* restore saved state */
- void (*fb_restore_state)(struct fb_info *info);
-
-+ /* Shut down the graphics engine to save power */
-+ int (*fb_powerdown)(struct fb_info *info);
-+
-+ /* Power it back up */
-+ int (*fb_powerup)(struct fb_info *info);
-+
- /* get capability given var */
- void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
- struct fb_var_screeninfo *var);
-@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_
- extern int fb_get_options(char *name, char **option);
- extern int fb_new_modelist(struct fb_info *info);
-
-+extern int fb_powerdown(struct fb_info *info);
-+extern int fb_powerup(struct fb_info *info);
-+
- extern struct fb_info *registered_fb[FB_MAX];
- extern int num_registered_fb;
- extern struct class *fb_class;
-Index: linux-2.6.23.17/include/linux/mtd/onenand.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/mtd/onenand.h
-+++ linux-2.6.23.17/include/linux/mtd/onenand.h
-@@ -60,6 +60,7 @@ struct onenand_bufferram {
- * @erase_shift: [INTERN] number of address bits in a block
- * @page_shift: [INTERN] number of address bits in a page
- * @page_mask: [INTERN] a page per block mask
-+ * @writesize: [INTERN] a real page size
- * @bufferram_index: [INTERN] BufferRAM index
- * @bufferram: [INTERN] BufferRAM info
- * @readw: [REPLACEABLE] hardware specific function for read short
-@@ -100,6 +101,7 @@ struct onenand_chip {
- unsigned int erase_shift;
- unsigned int page_shift;
- unsigned int page_mask;
-+ unsigned int writesize;
-
- unsigned int bufferram_index;
- struct onenand_bufferram bufferram[MAX_BUFFERRAM];
-@@ -140,6 +142,8 @@ struct onenand_chip {
- #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
- #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
- #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
-+#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
-+#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
-
- #define ONENAND_GET_SYS_CFG1(this) \
- (this->read_word(this->base + ONENAND_REG_SYS_CFG1))
-@@ -149,6 +153,13 @@ struct onenand_chip {
- #define ONENAND_IS_DDP(this) \
- (this->device_id & ONENAND_DEVICE_IS_DDP)
-
-+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
-+#define ONENAND_IS_2PLANE(this) \
-+ (this->options & ONENAND_HAS_2PLANE)
-+#else
-+#define ONENAND_IS_2PLANE(this) (0)
-+#endif
-+
- /* Check byte access in OneNAND */
- #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
-
-@@ -157,6 +168,7 @@ struct onenand_chip {
- */
- #define ONENAND_HAS_CONT_LOCK (0x0001)
- #define ONENAND_HAS_UNLOCK_ALL (0x0002)
-+#define ONENAND_HAS_2PLANE (0x0004)
- #define ONENAND_PAGEBUF_ALLOC (0x1000)
- #define ONENAND_OOBBUF_ALLOC (0x2000)
-
-Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h
-+++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h
-@@ -74,6 +74,8 @@
-
- #define ONENAND_DEVICE_DENSITY_512Mb (0x002)
- #define ONENAND_DEVICE_DENSITY_1Gb (0x003)
-+#define ONENAND_DEVICE_DENSITY_2Gb (0x004)
-+#define ONENAND_DEVICE_DENSITY_4Gb (0x005)
-
- /*
- * Version ID Register F002h (R)
-@@ -111,6 +113,8 @@
- #define ONENAND_CMD_READOOB (0x13)
- #define ONENAND_CMD_PROG (0x80)
- #define ONENAND_CMD_PROGOOB (0x1A)
-+#define ONENAND_CMD_2X_PROG (0x7D)
-+#define ONENAND_CMD_2X_CACHE_PROG (0x7F)
- #define ONENAND_CMD_UNLOCK (0x23)
- #define ONENAND_CMD_LOCK (0x2A)
- #define ONENAND_CMD_LOCK_TIGHT (0x2C)
-Index: linux-2.6.23.17/include/linux/vt_kern.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/vt_kern.h
-+++ linux-2.6.23.17/include/linux/vt_kern.h
-@@ -95,4 +95,23 @@ struct vt_spawn_console {
- };
- extern struct vt_spawn_console vt_spawn_con;
-
-+/* A notifier list for console events */
-+extern struct raw_notifier_head console_notifier_list;
-+
-+/* Called when the FG console switches to KD_TEXT mode */
-+#define CONSOLE_EVENT_SWITCH_TEXT 0x01
-+
-+/* Called when the FG console switches to KD_GRAPHICS mode */
-+#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
-+
-+static inline int console_event_register(struct notifier_block *n)
-+{
-+ return raw_notifier_chain_register(&console_notifier_list, n);
-+}
-+
-+static inline int console_event_unregister(struct notifier_block *n)
-+{
-+ return raw_notifier_chain_unregister(&console_notifier_list, n);
-+}
-+
- #endif /* _VT_KERN_H */
-Index: linux-2.6.23.17/kernel/power/console.c
-===================================================================
---- linux-2.6.23.17.orig/kernel/power/console.c
-+++ linux-2.6.23.17/kernel/power/console.c
-@@ -9,7 +9,7 @@
- #include <linux/console.h>
- #include "power.h"
-
--#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
-+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
- #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
-
- static int orig_fgconsole, orig_kmsg;
diff --git a/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch b/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch
deleted file mode 100644
index c322e46f53..0000000000
--- a/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch
+++ /dev/null
@@ -1,414 +0,0 @@
-Index: linux-2.6.23.17/include/sound/ac97_codec.h
-===================================================================
---- linux-2.6.23.17.orig/include/sound/ac97_codec.h
-+++ linux-2.6.23.17/include/sound/ac97_codec.h
-@@ -281,10 +281,12 @@
- /* specific - Analog Devices */
- #define AC97_AD_TEST 0x5a /* test register */
- #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
-+#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
- #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
- #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
- #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
- #define AC97_AD_MISC 0x76 /* Misc Control Bits */
-+#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
-
- /* specific - Cirrus Logic */
- #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
-Index: linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_codec.c
-+++ linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
-@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444
- MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
-
- #ifdef CONFIG_SND_AC97_POWER_SAVE
--static int power_save;
-+static int power_save = 1;
- module_param(power_save, bool, 0644);
- MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
- #endif
-Index: linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_patch.c
-+++ linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
-@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd
- .get = snd_ac97_ad1888_lohpsel_get,
- .put = snd_ac97_ad1888_lohpsel_put
- },
-- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
-- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
-+ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
-+ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
-+ AC97_AD_HPFD_SHIFT, 1, 1),
- AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-Index: linux-2.6.23.17/sound/pci/cs5535audio/Makefile
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/Makefile
-+++ linux-2.6.23.17/sound/pci/cs5535audio/Makefile
-@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y)
- snd-cs5535audio-objs += cs5535audio_pm.o
- endif
-
-+ifdef CONFIG_OLPC
-+snd-cs5535audio-objs += cs5535audio_olpc.o
-+endif
-+
- # Toplevel Module Dependency
- obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
-@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
- return snd_cs5535audio_codec_read(cs5535au, reg);
- }
-
--static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
-+static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
- {
- struct snd_card *card = cs5535au->card;
- struct snd_ac97_bus *pbus;
-@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct
- return err;
-
- memset(&ac97, 0, sizeof(ac97));
-- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
-+ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
-+ | AC97_SCAP_POWER_SAVE;
- ac97.private_data = cs5535au;
- ac97.pci = cs5535au->pci;
-
-+ /* olpc_prequirks is dummied out if not olpc */
-+ olpc_prequirks(card, &ac97);
-+
- if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
- snd_printk(KERN_ERR "mixer failed\n");
- return err;
-@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct
-
- snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
-
-+ /* olpc_quirks is dummied out if not olpc */
-+ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
-+ snd_printk(KERN_ERR "olpc quirks failed\n");
-+ return err;
-+ }
-+
- return 0;
- }
-
-@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs553
- static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
- {
- u16 acc_irq_stat;
-- u8 bm_stat;
- unsigned char count;
- struct cs5535audio *cs5535au = dev_id;
-
-@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_inter
-
- if (!acc_irq_stat)
- return IRQ_NONE;
-- for (count = 0; count < 10; count++) {
-+ for (count = 0; count < 4; count++) {
- if (acc_irq_stat & (1 << count)) {
- switch (count) {
- case IRQ_STS:
-@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_inter
- case BM1_IRQ_STS:
- process_bm1_irq(cs5535au);
- break;
-- case BM2_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS);
-- break;
-- case BM3_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS);
-- break;
-- case BM4_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS);
-- break;
-- case BM5_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS);
-- break;
-- case BM6_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS);
-- break;
-- case BM7_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS);
-- break;
- default:
-- snd_printk(KERN_ERR "Unexpected irq src\n");
-+ snd_printk(KERN_ERR "Unexpected irq src: "
-+ "0x%x\n", acc_irq_stat);
- break;
- }
- }
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.h
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
-@@ -16,57 +16,28 @@
- #define ACC_IRQ_STATUS 0x12
- #define ACC_BM0_CMD 0x20
- #define ACC_BM1_CMD 0x28
--#define ACC_BM2_CMD 0x30
--#define ACC_BM3_CMD 0x38
--#define ACC_BM4_CMD 0x40
--#define ACC_BM5_CMD 0x48
--#define ACC_BM6_CMD 0x50
--#define ACC_BM7_CMD 0x58
- #define ACC_BM0_PRD 0x24
- #define ACC_BM1_PRD 0x2C
--#define ACC_BM2_PRD 0x34
--#define ACC_BM3_PRD 0x3C
--#define ACC_BM4_PRD 0x44
--#define ACC_BM5_PRD 0x4C
--#define ACC_BM6_PRD 0x54
--#define ACC_BM7_PRD 0x5C
- #define ACC_BM0_STATUS 0x21
- #define ACC_BM1_STATUS 0x29
--#define ACC_BM2_STATUS 0x31
--#define ACC_BM3_STATUS 0x39
--#define ACC_BM4_STATUS 0x41
--#define ACC_BM5_STATUS 0x49
--#define ACC_BM6_STATUS 0x51
--#define ACC_BM7_STATUS 0x59
- #define ACC_BM0_PNTR 0x60
- #define ACC_BM1_PNTR 0x64
--#define ACC_BM2_PNTR 0x68
--#define ACC_BM3_PNTR 0x6C
--#define ACC_BM4_PNTR 0x70
--#define ACC_BM5_PNTR 0x74
--#define ACC_BM6_PNTR 0x78
--#define ACC_BM7_PNTR 0x7C
-+
- /* acc_codec bar0 reg bits */
- /* ACC_IRQ_STATUS */
- #define IRQ_STS 0
- #define WU_IRQ_STS 1
- #define BM0_IRQ_STS 2
- #define BM1_IRQ_STS 3
--#define BM2_IRQ_STS 4
--#define BM3_IRQ_STS 5
--#define BM4_IRQ_STS 6
--#define BM5_IRQ_STS 7
--#define BM6_IRQ_STS 8
--#define BM7_IRQ_STS 9
- /* ACC_BMX_STATUS */
- #define EOP (1<<0)
- #define BM_EOP_ERR (1<<1)
- /* ACC_BMX_CTL */
--#define BM_CTL_EN 0x00000001
--#define BM_CTL_PAUSE 0x00000011
--#define BM_CTL_DIS 0x00000000
--#define BM_CTL_BYTE_ORD_LE 0x00000000
--#define BM_CTL_BYTE_ORD_BE 0x00000100
-+#define BM_CTL_EN 0x01
-+#define BM_CTL_PAUSE 0x03
-+#define BM_CTL_DIS 0x00
-+#define BM_CTL_BYTE_ORD_LE 0x00
-+#define BM_CTL_BYTE_ORD_BE 0x04
- /* cs5535 specific ac97 codec register defines */
- #define CMD_MASK 0xFF00FFFF
- #define CMD_NEW 0x00010000
-@@ -106,8 +77,8 @@ struct cs5535audio_dma {
- struct snd_pcm_substream *substream;
- unsigned int buf_addr, buf_bytes;
- unsigned int period_bytes, periods;
-- int suspended;
- u32 saved_prd;
-+ int pcm_open_flag;
- };
-
- struct cs5535audio {
-@@ -123,8 +94,21 @@ struct cs5535audio {
- struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
- };
-
-+#ifdef CONFIG_PM
- int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
- int snd_cs5535audio_resume(struct pci_dev *pci);
-+#endif
-+
-+#ifdef CONFIG_OLPC
-+void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
-+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
-+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
-+#else
-+#define olpc_prequirks(arg,arg2) do {} while (0)
-+#define olpc_quirks(arg,arg2) (0)
-+#define olpc_ai_enable(a, v) (0)
-+#endif
-+
- int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
-
- #endif /* __SOUND_CS5535AUDIO_H */
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pcm.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
-@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets
- jmpprd_addr = cpu_to_le32(lastdesc->addr +
- (sizeof(struct cs5535audio_dma_desc)*periods));
-
-+ dma->substream = substream;
- dma->period_bytes = period_bytes;
- dma->periods = periods;
- spin_lock_irq(&cs5535au->reg_lock);
-@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packet
- {
- snd_dma_free_pages(&dma->desc_buf);
- dma->desc_buf.area = NULL;
-+ dma->substream = NULL;
- }
-
- static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
-@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(str
- err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
- params_periods(hw_params),
- params_period_bytes(hw_params));
-+ if (!err)
-+ dma->pcm_open_flag = 1;
-+
- return err;
- }
-
-@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struc
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct cs5535audio_dma *dma = substream->runtime->private_data;
-
-+ if (dma->pcm_open_flag) {
-+ if (substream == cs5535au->playback_substream)
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_FRONT_DAC_RATE, 0);
-+ else
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_LR_ADC_RATE, 0);
-+ dma->pcm_open_flag = 0;
-+ }
- cs5535audio_clear_dma_packets(cs5535au, dma, substream);
- return snd_pcm_lib_free_pages(substream);
- }
-@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struc
- break;
- case SNDRV_PCM_TRIGGER_RESUME:
- dma->ops->enable_dma(cs5535au);
-- dma->suspended = 0;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- dma->ops->disable_dma(cs5535au);
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- dma->ops->disable_dma(cs5535au);
-- dma->suspended = 1;
- break;
- default:
- snd_printk(KERN_ERR "unhandled trigger\n");
-@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(
- int err;
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-
- runtime->hw = snd_cs5535audio_capture;
- cs5535au->capture_substream = substream;
-@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(
- if ((err = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
- return err;
-- return 0;
-+
-+#ifdef CONFIG_OLPC
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Enable V_ref bias while recording. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
-+#endif
-+ return err;
- }
-
- static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
- {
-+#ifdef CONFIG_OLPC
-+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-+
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Disable V_ref bias. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
-+ 1<<AC97_AD_VREFD_SHIFT);
-+#endif
-+
- return 0;
- }
-
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pm.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
-@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_d
- int i;
-
- snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-+ snd_pcm_suspend_all(cs5535au->pcm);
-+ snd_ac97_suspend(cs5535au->ac97);
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && !dma->suspended)
-+ if (dma && dma->substream)
- dma->saved_prd = dma->ops->read_prd(cs5535au);
- }
-- snd_pcm_suspend_all(cs5535au->pcm);
-- snd_ac97_suspend(cs5535au->ac97);
- /* save important regs, then disable aclink in hw */
- snd_cs5535audio_stop_hardware(cs5535au);
-
-+ if (pci_save_state(pci)) {
-+ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
-+ return -EIO;
-+ }
- pci_disable_device(pci);
-- pci_save_state(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
- return 0;
- }
-@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_de
- int i;
-
- pci_set_power_state(pci, PCI_D0);
-- pci_restore_state(pci);
-+ if (pci_restore_state(pci) < 0) {
-+ printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
-+ "disabling device\n");
-+ snd_card_disconnect(card);
-+ return -EIO;
-+ }
- if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
- "disabling device\n");
-@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_de
- if (!timeout)
- snd_printk(KERN_ERR "Failure getting AC Link ready\n");
-
-- /* we depend on ac97 to perform the codec power up */
-- snd_ac97_resume(cs5535au->ac97);
- /* set up rate regs, dma. actual initiation is done in trig */
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && dma->suspended) {
-+ if (dma && dma->substream) {
- dma->substream->ops->prepare(dma->substream);
- dma->ops->setup_prd(cs5535au, dma->saved_prd);
- }
- }
--
-+
-+ /* we depend on ac97 to perform the codec power up */
-+ snd_ac97_resume(cs5535au->ac97);
- snd_power_change_state(card, SNDRV_CTL_POWER_D0);
-
- return 0;
diff --git a/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch b/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch
deleted file mode 100644
index 73860f9b84..0000000000
--- a/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Index: linux-2.6.23.17/include/linux/i2c-id.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/i2c-id.h
-+++ linux-2.6.23.17/include/linux/i2c-id.h
-@@ -119,6 +119,7 @@
- #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
- #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
- #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
-+#define I2C_DRIVERID_DCON 93
-
- #define I2C_DRIVERID_I2CDEV 900
- #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
diff --git a/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch b/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch
deleted file mode 100644
index a922b4e2a9..0000000000
--- a/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-Index: linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/block2mtd.c
-+++ linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
-@@ -20,6 +20,8 @@
- #include <linux/buffer_head.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-
- #define VERSION "$Revision: 1.30 $"
-
-@@ -27,6 +29,12 @@
- #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
- #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
-
-+struct retry {
-+ struct list_head list;
-+ const char *val;
-+};
-+
-+static LIST_HEAD(retry_list);
-
- /* Info for the block device */
- struct block2mtd_dev {
-@@ -38,10 +46,36 @@ struct block2mtd_dev {
- char devname[0];
- };
-
-+static int block2mtd_setup2(const char *val);
-
- /* Static info about the MTD, used in cleanup_module */
- static LIST_HEAD(blkmtd_device_list);
-
-+static int add_retry(const char *val)
-+{
-+ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
-+
-+ INIT_LIST_HEAD(&r->list);
-+ r->val = val;
-+ list_add(&r->list, &retry_list);
-+
-+ return 0;
-+}
-+
-+static int __init process_retries(void)
-+{
-+ struct list_head *p, *tmp;
-+
-+ list_for_each_safe(p, tmp, &retry_list) {
-+ struct retry *r = list_entry(p, struct retry, list);
-+ block2mtd_setup2(r->val);
-+ msleep(100);
-+ list_del(p);
-+ kfree(r);
-+ }
-+ return 0;
-+}
-+rootfs_initcall(process_retries);
-
- static struct page *page_read(struct address_space *mapping, int index)
- {
-@@ -518,7 +552,10 @@ static int block2mtd_setup2(const char *
- if (token[2] && (strlen(token[2]) + 1 > 80))
- parse_err("mtd device name too long");
-
-- add_device(name, erase_size, token[2]);
-+ if (add_device(name, erase_size, token[2]) == NULL) {
-+ add_retry(val);
-+ return 0;
-+ }
-
- return 0;
- }
-@@ -534,8 +571,11 @@ static int block2mtd_setup(const char *v
- and block2mtd_init() has already been called,
- we can parse the argument now. */
-
-- if (block2mtd_init_called)
-+ if (block2mtd_init_called) {
-+ /* if the call failed (e.g. because the device does not exist yet)
-+ * then try again just before attempting to mount the rootfs */
- return block2mtd_setup2(val);
-+ }
-
- /* During early boot stage, we only save the parameters
- here. We must parse them later: if the param passed
-Index: linux-2.6.23.17/init/do_mounts.c
-===================================================================
---- linux-2.6.23.17.orig/init/do_mounts.c
-+++ linux-2.6.23.17/init/do_mounts.c
-@@ -241,16 +241,8 @@ static int __init fs_names_setup(char *s
- return 1;
- }
-
--static unsigned int __initdata root_delay;
--static int __init root_delay_setup(char *str)
--{
-- root_delay = simple_strtoul(str, NULL, 0);
-- return 1;
--}
--
- __setup("rootflags=", root_data_setup);
- __setup("rootfstype=", fs_names_setup);
--__setup("rootdelay=", root_delay_setup);
-
- static void __init get_fs_names(char *page)
- {
-@@ -426,18 +418,6 @@ void __init prepare_namespace(void)
- {
- int is_floppy;
-
-- if (root_delay) {
-- printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
-- root_delay);
-- ssleep(root_delay);
-- }
--
-- /* wait for the known devices to complete their probing */
-- while (driver_probe_done() != 0)
-- msleep(100);
--
-- md_run_setup();
--
- if (saved_root_name[0]) {
- root_device_name = saved_root_name;
- if (!strncmp(root_device_name, "mtd", 3)) {
-Index: linux-2.6.23.17/init/main.c
-===================================================================
---- linux-2.6.23.17.orig/init/main.c
-+++ linux-2.6.23.17/init/main.c
-@@ -65,6 +65,7 @@
- #ifdef CONFIG_X86_LOCAL_APIC
- #include <asm/smp.h>
- #endif
-+#include "do_mounts.h"
-
- /*
- * This is one of the first .c files built. Error out early if we have compiler
-@@ -662,13 +663,14 @@ static int __init initcall_debug_setup(c
- __setup("initcall_debug", initcall_debug_setup);
-
- extern initcall_t __initcall_start[], __initcall_end[];
-+extern initcall_t __root_initcall_start[], __root_initcall_end[];
-
--static void __init do_initcalls(void)
-+static void __init do_initcalls(initcall_t *start, initcall_t *end)
- {
- initcall_t *call;
- int count = preempt_count();
-
-- for (call = __initcall_start; call < __initcall_end; call++) {
-+ for (call = start; call < end; call++) {
- ktime_t t0, t1, delta;
- char *msg = NULL;
- char msgbuf[40];
-@@ -737,7 +739,7 @@ static void __init do_basic_setup(void)
- usermodehelper_init();
- driver_init();
- init_irq_proc();
-- do_initcalls();
-+ do_initcalls(__initcall_start, __initcall_end);
- }
-
- static int __initdata nosoftlockup;
-@@ -810,6 +812,14 @@ static int noinline init_post(void)
- panic("No init found. Try passing init= option to kernel.");
- }
-
-+static unsigned int __initdata root_delay;
-+static int __init root_delay_setup(char *str)
-+{
-+ root_delay = simple_strtoul(str, NULL, 0);
-+ return 1;
-+}
-+__setup("rootdelay=", root_delay_setup);
-+
- static int __init kernel_init(void * unused)
- {
- lock_kernel();
-@@ -851,6 +861,17 @@ static int __init kernel_init(void * unu
-
- if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
- ramdisk_execute_command = NULL;
-+ if (root_delay) {
-+ printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
-+ root_delay);
-+ ssleep(root_delay);
-+ }
-+ /* wait for the known devices to complete their probing */
-+ while (driver_probe_done() != 0)
-+ msleep(100);
-+ md_run_setup();
-+ do_initcalls(__root_initcall_start, __root_initcall_end);
-+
- prepare_namespace();
- }
-
-Index: linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/vmlinux.lds.S
-+++ linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
-@@ -146,6 +146,11 @@ SECTIONS
- INITCALLS
- __initcall_end = .;
- }
-+ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
-+ __root_initcall_start = .;
-+ INITCALLS_ROOT
-+ __root_initcall_end = .;
-+ }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
-Index: linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-generic/vmlinux.lds.h
-+++ linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
-@@ -243,12 +243,14 @@
- *(.initcall4s.init) \
- *(.initcall5.init) \
- *(.initcall5s.init) \
-- *(.initcallrootfs.init) \
- *(.initcall6.init) \
- *(.initcall6s.init) \
- *(.initcall7.init) \
- *(.initcall7s.init)
-
-+#define INITCALLS_ROOT \
-+ *(.initcallrootfs.init)
-+
- #define PERCPU(align) \
- . = ALIGN(align); \
- __per_cpu_start = .; \