diff options
| author | hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-20 16:27:42 +0000 |
|---|---|---|
| committer | hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-20 16:27:42 +0000 |
| commit | 82c4f96e0155ea2b344fc12e2613f2a558b28ba9 (patch) | |
| tree | 136db11a5fc8f4ef4dd9e448bb7c17945e605cd9 /target/linux | |
| parent | a348226cd2f1e87f82d2489e8b04b665cd0fcc20 (diff) | |
[atheros]: Add initial kernel 2.6.28 support for atheros target.
The include files moved from /include/asm-mips/mach-atheros/ to /arch/mips/include/asm/mach-atheros/
This patch is based on the old kernel 2.6.27 patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14584 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux')
39 files changed, 6984 insertions, 0 deletions
diff --git a/target/linux/atheros/config-2.6.28 b/target/linux/atheros/config-2.6.28 new file mode 100644 index 0000000000..b088e19328 --- /dev/null +++ b/target/linux/atheros/config-2.6.28 @@ -0,0 +1,235 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_AR2313=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ATHEROS=y +CONFIG_ATHEROS_AR5312=y +CONFIG_ATHEROS_AR5315=y +CONFIG_ATHEROS_AR5315_PCI=y +CONFIG_ATHEROS_WDT=y +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BCM47XX is not set +CONFIG_BITREVERSE=y +# CONFIG_BT is not set +CONFIG_CEVT_R4K=y +CONFIG_CLASSIC_RCU=y +CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit" +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CSRC_R4K=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_FIXED_PHY is not set +# CONFIG_FREEZER is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GPIO_DEVICE=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HERMES is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +# CONFIG_I2C is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +CONFIG_ICPLUS_PHY=y +# CONFIG_IDE is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +CONFIG_KMOD=y +# CONFIG_LEDS_ALIX is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_MYLOADER_PARTS=y +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_START=0x0 +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_SPIFLASH=y +# CONFIG_NET_PCI is not set +CONFIG_NF_CT_ACCT=y +CONFIG_NF_DEFRAG_IPV4=m +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_PHYLIB=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set +CONFIG_RFKILL_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SND_MIPS=y +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SOUND_OSS_CORE=y +CONFIG_SSB_POSSIBLE=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_TICK_ONESHOT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_STORAGE_CYPRESS_ATACB=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_WDM=m +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig new file mode 100644 index 0000000000..953f0cb5b1 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig @@ -0,0 +1,27 @@ +config ATHEROS_AR5312 + bool "Atheros 5312/2312+ support" + depends on ATHEROS + default y + +config ATHEROS_AR5315 + bool "Atheros 5315/2315+ support" + depends on ATHEROS + select DMA_NONCOHERENT + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_GPIO + default y + +config ATHEROS_AR5315_PCI + bool "PCI support" + select HW_HAS_PCI + select PCI + select USB_ARCH_HAS_HCD + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + depends on ATHEROS_AR5315 + default n diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile new file mode 100644 index 0000000000..2c2b991bc4 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile @@ -0,0 +1,13 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2006 FON Technology, SL. +# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> +# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> +# + +obj-y += board.o prom.o reset.o +obj-$(CONFIG_ATHEROS_AR5312) += ar5312/ +obj-$(CONFIG_ATHEROS_AR5315) += ar5315/ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile new file mode 100644 index 0000000000..6c50d9931d --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile @@ -0,0 +1,11 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2007 FON Technology, SL. +# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> +# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> +# + +obj-y := board.o irq.o diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c new file mode 100644 index 0000000000..938db11bc8 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c @@ -0,0 +1,473 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Platform devices for Atheros SoCs + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <ar531x.h> +#include <linux/leds.h> + +#define NO_PHY 0x1f + +static int is_5312 = 0; +static struct platform_device *ar5312_devs[6]; + +static struct resource ar5312_eth0_res[] = { + { + .name = "eth0_membase", + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(AR531X_ENET0), + .end = KSEG1ADDR(AR531X_ENET0 + 0x2000), + }, + { + .name = "eth0_irq", + .flags = IORESOURCE_IRQ, + .start = AR5312_IRQ_ENET0_INTRS, + .end = AR5312_IRQ_ENET0_INTRS, + }, +}; +static struct ar531x_eth ar5312_eth0_data = { + .phy = NO_PHY, + .mac = 0, + .reset_base = AR531X_RESET, + .reset_mac = AR531X_RESET_ENET0, + .reset_phy = AR531X_RESET_EPHY0, + .phy_base = KSEG1ADDR(AR531X_ENET0), +}; + +static struct resource ar5312_eth1_res[] = { + { + .name = "eth1_membase", + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(AR531X_ENET1), + .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), + }, + { + .name = "eth1_irq", + .flags = IORESOURCE_IRQ, + .start = AR5312_IRQ_ENET1_INTRS, + .end = AR5312_IRQ_ENET1_INTRS, + }, +}; +static struct ar531x_eth ar5312_eth1_data = { + .phy = NO_PHY, + .mac = 1, + .reset_base = AR531X_RESET, + .reset_mac = AR531X_RESET_ENET1, + .reset_phy = AR531X_RESET_EPHY1, + .phy_base = KSEG1ADDR(AR531X_ENET1), +}; + +static struct platform_device ar5312_eth[] = { + { + .id = 0, + .name = "ar531x-eth", + .dev.platform_data = &ar5312_eth0_data, + .resource = ar5312_eth0_res, + .num_resources = ARRAY_SIZE(ar5312_eth0_res) + }, + { + .id = 1, + .name = "ar531x-eth", + .dev.platform_data = &ar5312_eth1_data, + .resource = ar5312_eth1_res, + .num_resources = ARRAY_SIZE(ar5312_eth1_res) + }, +}; + + +/* + * AR2312/3 ethernet uses the PHY of ENET0, but the MAC + * of ENET1. Atheros calls it 'twisted' for a reason :) + */ +static struct resource ar231x_eth0_res[] = { + { + .name = "eth0_membase", + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(AR531X_ENET1), + .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), + }, + { + .name = "eth0_irq", + .flags = IORESOURCE_IRQ, + .start = AR5312_IRQ_ENET1_INTRS, + .end = AR5312_IRQ_ENET1_INTRS, + }, +}; +static struct ar531x_eth ar231x_eth0_data = { + .phy = 1, + .mac = 1, + .reset_base = AR531X_RESET, + .reset_mac = AR531X_RESET_ENET1, + .reset_phy = AR531X_RESET_EPHY1, + .phy_base = KSEG1ADDR(AR531X_ENET0), +}; +static struct platform_device ar231x_eth0 = { + .id = 0, + .name = "ar531x-eth", + .dev.platform_data = &ar231x_eth0_data, + .resource = ar231x_eth0_res, + .num_resources = ARRAY_SIZE(ar231x_eth0_res) +}; + + +static struct platform_device ar5312_wmac[] = { + { + .id = 0, + .name = "ar531x-wmac", + }, + { + .id = 1, + .name = "ar531x-wmac", + }, +}; + +static struct physmap_flash_data ar5312_flash_data = { + .width = 2, +}; + +static struct resource ar5312_flash_resource = { + .start = AR531X_FLASH, + .end = AR531X_FLASH + 0x800000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ar5312_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ar5312_flash_data, + }, + .num_resources = 1, + .resource = &ar5312_flash_resource, +}; + +#ifdef CONFIG_LEDS_GPIO +static struct gpio_led ar5312_leds[] = { + { .name = "wlan", .gpio = 0, .active_low = 1, }, +}; + +static const struct gpio_led_platform_data ar5312_led_data = { + .num_leds = ARRAY_SIZE(ar5312_leds), + .leds = (void *) ar5312_leds, +}; + +static struct platform_device ar5312_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = (void *) &ar5312_led_data, + } +}; +#endif + +/* + * NB: This mapping size is larger than the actual flash size, + * but this shouldn't be a problem here, because the flash + * will simply be mapped multiple times. + */ +static char __init *ar5312_flash_limit(void) +{ + u32 ctl; + /* + * Configure flash bank 0. + * Assume 8M window size. Flash will be aliased if it's smaller + */ + ctl = FLASHCTL_E | + FLASHCTL_AC_8M | + FLASHCTL_RBLE | + (0x01 << FLASHCTL_IDCY_S) | + (0x07 << FLASHCTL_WST1_S) | + (0x07 << FLASHCTL_WST2_S) | + (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW); + + sysRegWrite(AR531X_FLASHCTL0, ctl); + + /* Disable other flash banks */ + sysRegWrite(AR531X_FLASHCTL1, + sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); + + sysRegWrite(AR531X_FLASHCTL2, + sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); + + return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); +} + +static struct ar531x_config __init *init_wmac(int unit) +{ + struct ar531x_config *config; + + config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); + config->board = board_config; + config->radio = radio_config; + config->unit = unit; + config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP); + + return config; +} + +int __init ar5312_init_devices(void) +{ + struct ar531x_boarddata *bcfg; + char *radio, *c; + int dev = 0; + uint32_t fctl = 0; + + if (!is_5312) + return 0; + + /* Locate board/radio config data */ + ar531x_find_config(ar5312_flash_limit()); + bcfg = (struct ar531x_boarddata *) board_config; + + + /* + * Chip IDs and hardware detection for some Atheros + * models are really broken! + * + * Atheros uses a disabled WMAC0 and Silicon ID of AR5312 + * as indication for AR2312, which is otherwise + * indistinguishable from the real AR5312. + */ + if (radio_config) { + radio = radio_config + AR531X_RADIO_MASK_OFF; + if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0) + bcfg->config |= BD_ISCASPER; + } else + radio = NULL; + + /* AR2313 has CPU minor rev. 10 */ + if ((current_cpu_data.processor_id & 0xff) == 0x0a) + mips_machtype = MACH_ATHEROS_AR2313; + + /* AR2312 shares the same Silicon ID as AR5312 */ + else if (bcfg->config & BD_ISCASPER) + mips_machtype = MACH_ATHEROS_AR2312; + + /* Everything else is probably AR5312 or compatible */ + else + mips_machtype = MACH_ATHEROS_AR5312; + + ar5312_eth0_data.board_config = board_config; + ar5312_eth1_data.board_config = board_config; + + /* fixup flash width */ + fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW; + switch (fctl) { + case FLASHCTL_MWx16: + ar5312_flash_data.width = 2; + break; + case FLASHCTL_MWx8: + default: + ar5312_flash_data.width = 1; + break; + } + + ar5312_devs[dev++] = &ar5312_physmap_flash; + +#ifdef CONFIG_LEDS_GPIO + ar5312_leds[0].gpio = bcfg->sysLedGpio; + ar5312_devs[dev++] = &ar5312_gpio_leds; +#endif + + if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6)) + memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6); + + if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) { + /* ENET0 and ENET1 have the same mac. + * Increment the one from ENET1 */ + c = bcfg->enet1Mac + 5; + while ((c >= (char *) bcfg->enet1Mac) && !(++(*c))) + c--; + } + + switch(mips_machtype) { + case MACH_ATHEROS_AR5312: + ar5312_eth0_data.macaddr = bcfg->enet0Mac; + ar5312_eth1_data.macaddr = bcfg->enet1Mac; + ar5312_devs[dev++] = &ar5312_eth[0]; + ar5312_devs[dev++] = &ar5312_eth[1]; + break; + case MACH_ATHEROS_AR2312: + case MACH_ATHEROS_AR2313: + ar231x_eth0_data.macaddr = bcfg->enet0Mac; + ar5312_devs[dev++] = &ar231x_eth0; + ar5312_flash_data.width = 1; + break; + } + + if (radio) { + if (mips_machtype == MACH_ATHEROS_AR5312) { + if (*((u32 *) radio) & AR531X_RADIO0_MASK) { + ar5312_wmac[0].dev.platform_data = init_wmac(0); + ar5312_devs[dev++] = &ar5312_wmac[0]; + } + } + if (*((u32 *) radio) & AR531X_RADIO1_MASK) { + ar5312_wmac[1].dev.platform_data = init_wmac(1); + ar5312_devs[dev++] = &ar5312_wmac[1]; + } + } + + return platform_add_devices(ar5312_devs, dev); +} + + +static void ar5312_halt(void) +{ + while (1); +} + +static void ar5312_power_off(void) +{ + ar5312_halt(); +} + + +static void ar5312_restart(char *command) +{ + /* reset the system */ + for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM); +} + + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ +static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { + 1, + 2, + 4, + 5 +}; + + +static unsigned int __init ar5312_cpu_frequency(void) +{ + unsigned int result; + unsigned int predivide_mask, predivide_shift; + unsigned int multiplier_mask, multiplier_shift; + unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; + unsigned int doubler_mask; + unsigned int wisoc_revision; + + /* Trust the bootrom's idea of cpu frequency. */ + if ((result = sysRegRead(AR5312_SCRATCH))) + return result; + + wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; + if (wisoc_revision == AR531X_REV_MAJ_AR2313) { + predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; + } else { /* AR5312 and AR2312 */ + predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; + } + + /* + * Clocking is derived from a fixed 40MHz input clock. + * + * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) + * sysFreq = cpuFreq / 4 (used for APB clock, serial, + * flash, Timer, Watchdog Timer) + * + * cntFreq = cpuFreq / 2 (use for CPU count/compare) + * + * So, for example, with a PLL multiplier of 5, we have + * + * cpuFreq = 200MHz + * sysFreq = 50MHz + * cntFreq = 100MHz + * + * We compute the CPU frequency, based on PLL settings. + */ + + clockCtl1 = sysRegRead(AR5312_CLOCKCTL1); + preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; + preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; + multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; + + if (clockCtl1 & doubler_mask) { + multiplier = multiplier << 1; + } + return (40000000 / preDivisor) * multiplier; +} + +static inline int ar5312_sys_frequency(void) +{ + return ar5312_cpu_frequency() / 4; +} + +static void __init ar5312_time_init(void) +{ + mips_hpt_frequency = ar5312_cpu_frequency() / 2; +} + + +void __init ar5312_prom_init(void) +{ + u32 memsize, memcfg, bank0AC, bank1AC; + + is_5312 = 1; + + /* Detect memory size */ + memcfg = sysRegRead(AR531X_MEM_CFG1); + bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; + bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; + memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) + + (bank1AC ? (1 << (bank1AC+1)) : 0); + memsize <<= 20; + add_memory_region(0, memsize, BOOT_MEM_RAM); + + /* Initialize it to AR5312 for now. Real detection will be done + * in ar5312_init_devices() */ + mips_machtype = MACH_ATHEROS_AR5312; +} + +void __init ar5312_plat_setup(void) +{ + /* Clear any lingering AHB errors */ + sysRegRead(AR531X_PROCADDR); + sysRegRead(AR531X_DMAADDR); + sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); + + board_time_init = ar5312_time_init; + + _machine_restart = ar5312_restart; + _machine_halt = ar5312_halt; + pm_power_off = ar5312_power_off; + + serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency()); +} + +arch_initcall(ar5312_init_devices); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c new file mode 100644 index 0000000000..0cbdc8ed22 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c @@ -0,0 +1,174 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Platform devices for Atheros SoCs + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <asm/bootinfo.h> +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <ar531x.h> +#include <gpio.h> + +/* + * Called when an interrupt is received, this function + * determines exactly which interrupt it was, and it + * invokes the appropriate handler. + * + * Implicitly, we also define interrupt priority by + * choosing which to dispatch first. + */ +asmlinkage void ar5312_irq_dispatch(void) +{ + int pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP2) + do_IRQ(AR5312_IRQ_WLAN0_INTRS); + else if (pending & CAUSEF_IP3) + do_IRQ(AR5312_IRQ_ENET0_INTRS); + else if (pending & CAUSEF_IP4) + do_IRQ(AR5312_IRQ_ENET1_INTRS); + else if (pending & CAUSEF_IP5) + do_IRQ(AR5312_IRQ_WLAN1_INTRS); + else if (pending & CAUSEF_IP6) { + unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR); + + if (ar531x_misc_intrs & AR531X_ISR_TIMER) { + do_IRQ(AR531X_MISC_IRQ_TIMER); + (void)sysRegRead(AR531X_TIMER); + } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) + do_IRQ(AR531X_MISC_IRQ_AHB_PROC); + else if ((ar531x_misc_intrs & AR531X_ISR_UART0)) + do_IRQ(AR531X_MISC_IRQ_UART0); + else if (ar531x_misc_intrs & AR531X_ISR_WD) + do_IRQ(AR531X_MISC_IRQ_WATCHDOG); + else + do_IRQ(AR531X_MISC_IRQ_NONE); + } else if (pending & CAUSEF_IP7) { + do_IRQ(AR531X_IRQ_CPU_CLOCK); + } +} + + +/* Enable the specified AR531X_MISC_IRQ interrupt */ +static void +ar5312_misc_intr_enable(unsigned int irq) +{ + unsigned int imr; + + imr = sysRegRead(AR531X_IMR); + imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); + sysRegWrite(AR531X_IMR, imr); + sysRegRead(AR531X_IMR); /* flush write buffer */ +} + +/* Disable the specified AR531X_MISC_IRQ interrupt */ +static void +ar5312_misc_intr_disable(unsigned int irq) +{ + unsigned int imr; + + imr = sysRegRead(AR531X_IMR); + imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); + sysRegWrite(AR531X_IMR, imr); + sysRegRead(AR531X_IMR); /* flush write buffer */ +} + +/* Turn on the specified AR531X_MISC_IRQ interrupt */ +static unsigned int +ar5312_misc_intr_startup(unsigned int irq) +{ + ar5312_misc_intr_enable(irq); + return 0; +} + +/* Turn off the specified AR531X_MISC_IRQ interrupt */ +static void +ar5312_misc_intr_shutdown(unsigned int irq) +{ + ar5312_misc_intr_disable(irq); +} + +static void +ar5312_misc_intr_ack(unsigned int irq) +{ + ar5312_misc_intr_disable(irq); +} + +static void +ar5312_misc_intr_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ar5312_misc_intr_enable(irq); +} + +static struct irq_chip ar5312_misc_intr_controller = { + .typename = "AR5312 misc", + .startup = ar5312_misc_intr_startup, + .shutdown = ar5312_misc_intr_shutdown, + .enable = ar5312_misc_intr_enable, + .disable = ar5312_misc_intr_disable, + .ack = ar5312_misc_intr_ack, + .end = ar5312_misc_intr_end, +}; + +static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) +{ + u32 proc1 = sysRegRead(AR531X_PROC1); + u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */ + u32 dma1 = sysRegRead(AR531X_DMA1); + u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */ + + printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", + procAddr, proc1, dmaAddr, dma1); + + machine_restart("AHB error"); /* Catastrophic failure */ + return IRQ_HANDLED; +} + + +static struct irqaction ar5312_ahb_proc_interrupt = { + .handler = ar5312_ahb_proc_handler, + .flags = IRQF_DISABLED, + .name = "ar5312_ahb_proc_interrupt", +}; + + +static struct irqaction cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "cascade", +}; + +void __init ar5312_misc_intr_init(int irq_base) +{ + int i; + + for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &ar5312_misc_intr_controller; + } + setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt); + setup_irq(AR5312_IRQ_MISC_INTRS, &cascade); +} + + diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile new file mode 100644 index 0000000000..9b900113ff --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile @@ -0,0 +1,12 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2007 FON Technology, SL. +# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> +# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> +# + +obj-y := board.o irq.o +obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c new file mode 100644 index 0000000000..6ee75a966e --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c @@ -0,0 +1,414 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Platform devices for Atheros SoCs + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/delay.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <ar531x.h> +#include <linux/leds.h> +#include <asm/gpio.h> + +static int is_5315 = 0; + +static struct resource ar5315_eth_res[] = { + { + .name = "eth0_membase", + .flags = IORESOURCE_MEM, + .start = AR5315_ENET0, + .end = AR5315_ENET0 + 0x2000, + }, + { + .name = "eth0_irq", + .flags = IORESOURCE_IRQ, + .start = AR5315_IRQ_ENET0_INTRS, + .end = AR5315_IRQ_ENET0_INTRS, + }, +}; + +static struct ar531x_eth ar5315_eth_data = { + .phy = 1, + .mac = 0, + .reset_base = AR5315_RESET, + .reset_mac = AR5315_RESET_ENET0, + .reset_phy = AR5315_RESET_EPHY0, + .phy_base = AR5315_ENET0 +}; + +static struct platform_device ar5315_eth = { + .id = 0, + .name = "ar531x-eth", + .dev.platform_data = &ar5315_eth_data, + .resource = ar5315_eth_res, + .num_resources = ARRAY_SIZE(ar5315_eth_res) +}; + +static struct platform_device ar5315_wmac = { + .id = 0, + .name = "ar531x-wmac", + /* FIXME: add resources */ +}; + +static struct resource ar5315_spiflash_res[] = { + { + .name = "flash_base", + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(AR5315_SPI_READ), + .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000, + }, + { + .name = "flash_regs", + .flags = IORESOURCE_MEM, + .start = 0x11300000, + .end = 0x11300012, + }, +}; + +static struct platform_device ar5315_spiflash = { + .id = 0, + .name = "spiflash", + .resource = ar5315_spiflash_res, + .num_resources = ARRAY_SIZE(ar5315_spiflash_res) +}; + +#ifdef CONFIG_LEDS_GPIO +static struct gpio_led ar5315_leds[8]; + +static struct gpio_led_platform_data ar5315_led_data = { + .num_leds = ARRAY_SIZE(ar5315_leds), + .leds = (void *) ar5315_leds, +}; + +static struct platform_device ar5315_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = (void *) &ar5315_led_data, + } +}; +#endif + +static struct platform_device ar5315_wdt = +{ + .id = 0, + .name = "ar2315_wdt", +}; + +static __initdata struct platform_device *ar5315_devs[6]; + +static void *flash_regs; + +static inline __u32 spiflash_regread32(int reg) +{ + volatile __u32 *data = (__u32 *)(flash_regs + reg); + + return (*data); +} + +static inline void spiflash_regwrite32(int reg, __u32 data) +{ + volatile __u32 *addr = (__u32 *)(flash_regs + reg); + + *addr = data; +} + +#define SPI_FLASH_CTL 0x00 +#define SPI_FLASH_OPCODE 0x04 +#define SPI_FLASH_DATA 0x08 + +static __u8 spiflash_probe(void) +{ + __u32 reg; + + do { + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 | + (1 << 4) | SPI_CTL_START; + + spiflash_regwrite32(SPI_FLASH_CTL, reg); + + do { + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); + reg &= 0xff; + + return (u8) reg; +} + + +#define STM_8MBIT_SIGNATURE 0x13 +#define STM_16MBIT_SIGNATURE 0x14 +#define STM_32MBIT_SIGNATURE 0x15 +#define STM_64MBIT_SIGNATURE 0x16 +#define STM_128MBIT_SIGNATURE 0x17 + + +static char __init *ar5315_flash_limit(void) +{ + u8 sig; + u32 flash_size = 0; + + /* probe the flash chip size */ + flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start); + sig = spiflash_probe(); + iounmap(flash_regs); + + switch(sig) { + case STM_8MBIT_SIGNATURE: + flash_size = 0x00100000; + break; + case STM_16MBIT_SIGNATURE: + flash_size = 0x00200000; + break; + case STM_32MBIT_SIGNATURE: + flash_size = 0x00400000; + break; + case STM_64MBIT_SIGNATURE: + flash_size = 0x00800000; + break; + case STM_128MBIT_SIGNATURE: + flash_size = 0x01000000; + break; + } + + ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size; + return (char *) ar5315_spiflash_res[0].end; +} + +int __init ar5315_init_devices(void) +{ + struct ar531x_config *config; + struct ar531x_boarddata *bcfg; + int dev = 0; +#ifdef CONFIG_LEDS_GPIO + int i; + char *tmp; +#endif + + if (!is_5315) + return 0; + + /* Find board configuration */ + ar531x_find_config(ar5315_flash_limit()); + bcfg = (struct ar531x_boarddata *) board_config; + + config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); + config->board = board_config; + config->radio = radio_config; + config->unit = 0; + config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP); + + ar5315_eth_data.board_config = board_config; + ar5315_eth_data.macaddr = bcfg->enet0Mac; + ar5315_wmac.dev.platform_data = config; + + ar5315_devs[dev++] = &ar5315_eth; + ar5315_devs[dev++] = &ar5315_wmac; + ar5315_devs[dev++] = &ar5315_spiflash; + ar5315_devs[dev++] = &ar5315_wdt; + +#ifdef CONFIG_LEDS_GPIO + ar5315_led_data.num_leds = 0; + for(i = 1; i < 8; i++) + { + if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio)) + { + if(i == bcfg->sysLedGpio) + { + tmp = kstrdup("wlan", GFP_KERNEL); + } else { + tmp = kmalloc(6, GFP_KERNEL); + if(tmp) + sprintf((char*)tmp, "gpio%d", i); + } + if(tmp) + { + ar5315_leds[ar5315_led_data.num_leds].name = tmp; + ar5315_leds[ar5315_led_data.num_leds].gpio = i; + ar5315_leds[ar5315_led_data.num_leds].active_low = 0; + ar5315_led_data.num_leds++; + } else { + printk("failed to alloc led string\n"); + continue; + } + } + } + ar5315_devs[dev++] = &ar5315_gpio_leds; +#endif + + return platform_add_devices(ar5315_devs, dev); +} + +static void ar5315_halt(void) +{ + while (1); +} + +static void ar5315_power_off(void) +{ + ar5315_halt(); +} + + +static void ar5315_restart(char *command) +{ + void (*mips_reset_vec)(void) = (void *) 0xbfc00000; + + /* reset the system */ + sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM); + + /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. + * give it some time to attempt a gpio based hardware reset + * (atheros reference design workaround) */ + gpio_direction_output(AR5315_RESET_GPIO, 0); + mdelay(100); + + /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic + * workaround. Attempt to jump to the mips reset location - + * the boot loader itself might be able to recover the system */ + mips_reset_vec(); +} + + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ +static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { + 1, + 2, + 4, + 5 +}; + +static int __initdata PLLC_DIVIDE_TABLE[5] = { + 2, + 3, + 4, + 6, + 3 +}; + +static unsigned int __init +ar5315_sys_clk(unsigned int clockCtl) +{ + unsigned int pllcCtrl,cpuDiv; + unsigned int pllcOut,refdiv,fdiv,divby2; + unsigned int clkDiv; + + pllcCtrl = sysRegRead(AR5315_PLLC_CTL); + refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; + refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; + fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; + divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; + divby2 += 1; + pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; + + + /* clkm input selected */ + switch(clockCtl & CPUCLK_CLK_SEL_M) { + case 0: + case 1: + clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; + break; + case 2: + clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; + break; + default: + pllcOut = 40000000; + clkDiv = 1; + break; + } + cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; + cpuDiv = cpuDiv * 2 ?: 1; + return (pllcOut/(clkDiv * cpuDiv)); +} + +static inline unsigned int ar5315_cpu_frequency(void) +{ + return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK)); +} + +static inline unsigned int ar5315_apb_frequency(void) +{ + return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK)); +} + +static void __init ar5315_time_init(void) +{ + mips_hpt_frequency = ar5315_cpu_frequency() / 2; +} + +void __init ar5315_prom_init(void) +{ + u32 memsize, memcfg, devid; + + is_5315 = 1; + memcfg = sysRegRead(AR5315_MEM_CFG); + memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); + memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); + memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); + memsize <<= 3; + add_memory_region(0, memsize, BOOT_MEM_RAM); + + /* Detect the hardware based on the device ID */ + devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP; + switch(devid) { + case 0x90: + case 0x91: + mips_machtype = MACH_ATHEROS_AR2317; + break; + default: + mips_machtype = MACH_ATHEROS_AR2315; + break; + } +} + +void __init ar5315_plat_setup(void) +{ + unsigned int config = read_c0_config(); + + /* Clear any lingering AHB errors */ + write_c0_config(config & ~0x3); + sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); + sysRegRead(AR5315_AHB_ERR1); + sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION); + + board_time_init = ar5315_time_init; + + _machine_restart = ar5315_restart; + _machine_halt = ar5315_halt; + pm_power_off = ar5315_power_off; + + serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency()); +} + +arch_initcall(ar5315_init_devices); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c new file mode 100644 index 0000000000..581b1a4a10 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c @@ -0,0 +1,359 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Platform devices for Atheros SoCs + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <asm/bootinfo.h> +#include <asm/irq_cpu.h> +#include <asm/io.h> + +#include <ar531x.h> +#include <gpio.h> + +static u32 gpiointmask = 0, gpiointval = 0; + +static inline void ar5315_gpio_irq(void) +{ + u32 pend; + sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO); + + /* only do one gpio interrupt at a time */ + pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask; + if (!pend) + return; + + do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1); +} + + +/* + * Called when an interrupt is received, this function + * determines exactly which interrupt it was, and it + * invokes the appropriate handler. + * + * Implicitly, we also define interrupt priority by + * choosing which to dispatch first. + */ +asmlinkage void ar5315_irq_dispatch(void) +{ + int pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP3) + do_IRQ(AR5315_IRQ_WLAN0_INTRS); + else if (pending & CAUSEF_IP4) + do_IRQ(AR5315_IRQ_ENET0_INTRS); +#ifdef CONFIG_PCI + else if (pending & CAUSEF_IP5) + ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI); +#endif + else if (pending & CAUSEF_IP2) { + unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR); + + if (ar531x_misc_intrs & AR5315_ISR_SPI) + do_IRQ(AR531X_MISC_IRQ_SPI); + else if (ar531x_misc_intrs & AR5315_ISR_TIMER) + do_IRQ(AR531X_MISC_IRQ_TIMER); + else if (ar531x_misc_intrs & AR5315_ISR_AHB) + do_IRQ(AR531X_MISC_IRQ_AHB_PROC); + else if (ar531x_misc_intrs & AR5315_ISR_GPIO) + ar5315_gpio_irq(); + else if (ar531x_misc_intrs & AR5315_ISR_UART0) + do_IRQ(AR531X_MISC_IRQ_UART0); + else if (ar531x_misc_intrs & AR5315_ISR_WD) + do_IRQ(AR531X_MISC_IRQ_WATCHDOG); + else + do_IRQ(AR531X_MISC_IRQ_NONE); + } else if (pending & CAUSEF_IP7) + do_IRQ(AR531X_IRQ_CPU_CLOCK); +} + +#ifdef CONFIG_PCI +static inline void pci_abort_irq(void) +{ + sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT); + (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */ +} + +static inline void pci_ack_irq(void) +{ + sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT); + (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */ +} + +void ar5315_pci_irq(int irq) +{ + if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT) + pci_abort_irq(); + else { + do_IRQ(irq); + pci_ack_irq(); + } +} +#endif + +static void ar5315_gpio_intr_enable(unsigned int irq) +{ + u32 gpio, mask; + gpio = irq - AR531X_GPIO_IRQ_BASE; + mask = 1 << gpio; + gpiointmask |= mask; + + /* reconfigure GPIO line as input */ + sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio)); + + /* Enable interrupt with edge detection */ + sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3)); +} + +static void ar5315_gpio_intr_disable(unsigned int irq) +{ + u32 gpio, mask; + gpio = irq - AR531X_GPIO_IRQ_BASE; + mask = 1 << gpio; + + gpiointmask &= ~mask; + + /* Disable interrupt with edge detection */ + sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0)); +} + +/* Turn on the specified AR531X_MISC_IRQ interrupt */ +static unsigned int ar5315_gpio_intr_startup(unsigned int irq) +{ + ar5315_gpio_intr_enable(irq); + return 0; +} + +/* Turn off the specified AR531X_MISC_IRQ interrupt */ +static void +ar5315_gpio_intr_shutdown(unsigned int irq) +{ + ar5315_gpio_intr_disable(irq); +} + +static void +ar5315_gpio_intr_ack(unsigned int irq) +{ + ar5315_gpio_intr_disable(irq); +} + +static void +ar5315_gpio_intr_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ar5315_gpio_intr_enable(irq); +} + +static struct irq_chip ar5315_gpio_intr_controller = { + .typename = "AR5315 GPIO", + .startup = ar5315_gpio_intr_startup, + .shutdown = ar5315_gpio_intr_shutdown, + .enable = ar5315_gpio_intr_enable, + .disable = ar5315_gpio_intr_disable, + .ack = ar5315_gpio_intr_ack, + .end = ar5315_gpio_intr_end, +}; + + +/* Enable the specified AR531X_MISC_IRQ interrupt */ +static void +ar5315_misc_intr_enable(unsigned int irq) +{ + unsigned int imr; + + imr = sysRegRead(AR5315_IMR); + switch(irq) + { + case AR531X_MISC_IRQ_SPI: + imr |= AR5315_ISR_SPI; + break; + + case AR531X_MISC_IRQ_TIMER: + imr |= AR5315_ISR_TIMER; + break; + + case AR531X_MISC_IRQ_AHB_PROC: + imr |= AR5315_ISR_AHB; + break; + + case AR531X_MISC_IRQ_AHB_DMA: + imr |= 0/* ?? */; + break; + + case AR531X_MISC_IRQ_GPIO: + imr |= AR5315_ISR_GPIO; + break; + + case AR531X_MISC_IRQ_UART0: + imr |= AR5315_ISR_UART0; + break; + + + case AR531X_MISC_IRQ_WATCHDOG: + imr |= AR5315_ISR_WD; + break; + + case AR531X_MISC_IRQ_LOCAL: + imr |= 0/* ?? */; + break; + + } + sysRegWrite(AR5315_IMR, imr); + imr=sysRegRead(AR5315_IMR); /* flush write buffer */ +} + +/* Disable the specified AR531X_MISC_IRQ interrupt */ +static void +ar5315_misc_intr_disable(unsigned int irq) +{ + unsigned int imr; + + imr = sysRegRead(AR5315_IMR); + switch(irq) + { + case AR531X_MISC_IRQ_SPI: + imr &= ~AR5315_ISR_SPI; + break; + + case AR531X_MISC_IRQ_TIMER: + imr &= (~AR5315_ISR_TIMER); + break; + + case AR531X_MISC_IRQ_AHB_PROC: + imr &= (~AR5315_ISR_AHB); + break; + + case AR531X_MISC_IRQ_AHB_DMA: + imr &= 0/* ?? */; + break; + + case AR531X_MISC_IRQ_GPIO: + imr &= ~AR5315_ISR_GPIO; + break; + + case AR531X_MISC_IRQ_UART0: + imr &= (~AR5315_ISR_UART0); + break; + + case AR531X_MISC_IRQ_WATCHDOG: + imr &= (~AR5315_ISR_WD); + break; + + case AR531X_MISC_IRQ_LOCAL: + imr &= ~0/* ?? */; + break; + + } + sysRegWrite(AR5315_IMR, imr); + sysRegRead(AR5315_IMR); /* flush write buffer */ +} + +/* Turn on the specified AR531X_MISC_IRQ interrupt */ +static unsigned int +ar5315_misc_intr_startup(unsigned int irq) +{ + ar5315_misc_intr_enable(irq); + return 0; +} + +/* Turn off the specified AR531X_MISC_IRQ interrupt */ +static void +ar5315_misc_intr_shutdown(unsigned int irq) +{ + ar5315_misc_intr_disable(irq); +} + +static void +ar5315_misc_intr_ack(unsigned int irq) +{ + ar5315_misc_intr_disable(irq); +} + +static void +ar5315_misc_intr_end(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + ar5315_misc_intr_enable(irq); +} + +static struct irq_chip ar5315_misc_intr_controller = { + .typename = "AR5315 misc", + .startup = ar5315_misc_intr_startup, + .shutdown = ar5315_misc_intr_shutdown, + .enable = ar5315_misc_intr_enable, + .disable = ar5315_misc_intr_disable, + .ack = ar5315_misc_intr_ack, + .end = ar5315_misc_intr_end, +}; + +static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id) +{ + sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); + sysRegRead(AR5315_AHB_ERR1); + + printk("AHB fatal error\n"); + machine_restart("AHB error"); /* Catastrophic failure */ + + return IRQ_HANDLED; +} + +static struct irqaction ar5315_ahb_proc_interrupt = { + .handler = ar5315_ahb_proc_handler, + .flags = IRQF_DISABLED, + .name = "ar5315_ahb_proc_interrupt", +}; + + +static struct irqaction cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "cascade", +}; + +static void ar5315_gpio_intr_init(int irq_base) +{ + int i; + + for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &ar5315_gpio_intr_controller; + } + setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); + gpiointval = sysRegRead(AR5315_GPIO_DI); +} + +void ar5315_misc_intr_init(int irq_base) +{ + int i; + + for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &ar5315_misc_intr_controller; + } + setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt); + setup_irq(AR5315_IRQ_MISC_INTRS, &cascade); + ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE); +} + diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c new file mode 100644 index 0000000000..166fa1cf97 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c @@ -0,0 +1,265 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/bootinfo.h> +#include <asm/paccess.h> +#include <asm/irq_cpu.h> +#include <asm/io.h> +#include "ar531x.h" + +#define AR531X_MEM_BASE 0x80800000UL +#define AR531X_MEM_SIZE 0x00ffffffUL +#define AR531X_IO_SIZE 0x00007fffUL +#define IDSEL_SHIFT 13 + +static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED; +static u32 cfgaddr; + +static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write) +{ + u32 address; /* Address to read from */ + u32 reg; + unsigned long flags; + int ret = -1; + if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2)) + return ret; + + spin_lock_irqsave(&ar531x_pci_lock, flags); + + /* Select Configuration access */ + reg = sysRegRead(AR5315_PCI_MISC_CONFIG); + reg |= AR5315_PCIMISC_CFG_SEL; + sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); + (void)sysRegRead(AR5315_PCI_MISC_CONFIG); + + address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where; + + if (size == 1) + address ^= 0x3; + else if (size == 2) + address ^= 0x2; + + if (write) { + if (size == 1) + ret = put_dbe(ptr, (u8 *) address); + else if (size == 2) + ret = put_dbe(ptr, (u16 *) address); + else if (size == 4) + ret = put_dbe(ptr, (u32 *) address); + } else { + if (size == 1) + ret = get_dbe(*((u32 *)ptr), (u8 *) address); + else if (size == 2) + ret = get_dbe(*((u32 *)ptr), (u16 *) address); + else if (size == 4) + ret = get_dbe(*((u32 *)ptr), (u32 *) address); + } + + /* Select Memory access */ + reg = sysRegRead(AR5315_PCI_MISC_CONFIG); + reg &= ~AR5315_PCIMISC_CFG_SEL; + sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); + (void)sysRegRead(AR5315_PCI_MISC_CONFIG); + + spin_unlock_irqrestore(&ar531x_pci_lock, flags); + + if (ret) { + *((u32 *)ptr) = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) +{ + return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0); +} + +static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1); +} + +struct pci_ops ar531x_pci_ops = { + .read = ar531x_pci_read, + .write = ar531x_pci_write, +}; + +static struct resource ar531x_mem_resource = { + .name = "AR531x PCI MEM", + .start = AR531X_MEM_BASE, + .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000, + .flags = IORESOURCE_MEM, +}; + +static struct resource ar531x_io_resource = { + .name = "AR531x PCI I/O", + .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE, + .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +struct pci_controller ar531x_pci_controller = { + .pci_ops = &ar531x_pci_ops, + .mem_resource = &ar531x_mem_resource, + .io_resource = &ar531x_io_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return AR5315_IRQ_LCBUS_PCI; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + u32 reg; + + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5); + pci_write_config_word(dev, 0x40, 0); + + /* Clear any pending Abort or external Interrupts + * and enable interrupt processing */ + reg = sysRegRead(AR5315_PCI_INTEN_REG); + reg &= ~AR5315_PCI_INT_ENABLE; + sysRegWrite(AR5315_PCI_INTEN_REG, reg); + + reg = sysRegRead(AR5315_PCI_INT_STATUS); + reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT); + sysRegWrite(AR5315_PCI_INT_STATUS, reg); + + reg = sysRegRead(AR5315_PCI_INT_MASK); + reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT); + sysRegWrite(AR5315_PCI_INT_MASK, reg); + + reg = sysRegRead(AR5315_PCI_INTEN_REG); + reg |= AR5315_PCI_INT_ENABLE; + sysRegWrite(AR5315_PCI_INTEN_REG, reg); + + return 0; +} + +static void ar5315_pci_fixup(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + + if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0)) + return; + +#define _DEV bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn) + printk("PCI: fixing up device %d,%d,%d\n", _DEV); + /* fix up mbars */ + config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1); + config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1); + config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1); + config_access(_DEV, PCI_COMMAND, 4, + PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| + PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR| + PCI_COMMAND_FAST_BACK, 1); +#undef _DEV +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup); + +int __init ar5315_pci_init(void) +{ + u32 reg; + + if (mips_machtype != MACH_ATHEROS_AR2315) + return -ENODEV; + + printk("AR531x PCI init... \n"); + + cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */ + ar531x_pci_controller.io_map_base = + (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE); + set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */ + + reg = sysRegRead(AR5315_RESET); + sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA); + + udelay(10*1000); + + sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA); + sysRegRead(AR5315_RESET); /* read after */ + + udelay(10*1000); + + reg = sysRegRead(AR5315_ENDIAN_CTL); + reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE; + + sysRegWrite(AR5315_ENDIAN_CTL, reg); + + reg = sysRegRead(AR5315_PCICLK); + reg = 4; + sysRegWrite(AR5315_PCICLK, reg); + + reg = sysRegRead(AR5315_AHB_ARB_CTL); + reg |= (ARB_PCI); + sysRegWrite(AR5315_AHB_ARB_CTL, reg); + + reg = sysRegRead(AR5315_IF_CTL); + reg &= ~(IF_PCI_CLK_MASK | IF_MASK); + reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT)); + + sysRegWrite(AR5315_IF_CTL, reg); + + /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */ + reg = sysRegRead(AR5315_PCI_MISC_CONFIG); + reg &= ~(AR5315_PCIMISC_RST_MODE); + reg |= AR5315_PCIRST_LOW; + sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); + + /* wait for 100 ms */ + udelay(100*1000); + + /* Bring the PCI out of reset */ + reg = sysRegRead(AR5315_PCI_MISC_CONFIG); + reg &= ~(AR5315_PCIMISC_RST_MODE); + reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8); + sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); + + sysRegWrite(AR5315_PCI_UNCACHE_CFG, + 0x1E | /* 1GB uncached */ + (1 << 5) | /* Enable uncached */ + (0x2 << 30) /* Base: 0x80000000 */ + ); + (void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */ + + udelay(500*1000); + + /* dirty hack - anyone with a datasheet that knows the memory map ? */ + ioport_resource.start = 0x10000000; + ioport_resource.end = 0xffffffff; + iomem_resource.start = 0x10000000; + iomem_resource.end = 0xffffffff; + + register_pci_controller(&ar531x_pci_controller); + + printk("done\n"); + return 0; +} + +arch_initcall(ar5315_pci_init); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c new file mode 100644 index 0000000000..4a224933ae --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c @@ -0,0 +1,299 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Platform devices for Atheros SoCs + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/random.h> +#include <asm/bootinfo.h> +#include <asm/irq_cpu.h> +#include <asm/io.h> +#include <ar531x.h> + +char *board_config = NULL; +char *radio_config = NULL; +int broken_boarddata = 0; + +extern int early_serial_setup(struct uart_port *port); + +static inline bool +check_radio_magic(unsigned char *addr) +{ + addr += 0x7a; /* offset for flash magic */ + if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) { + return 1; + } + return 0; +} + +static inline bool +check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken) +{ + /* config magic found */ + if ( *(int *)addr == 0x35333131) + return 1; + + if (!broken) + return 0; + + if (check_radio_magic(addr + 0xf8)) + radio_config = addr + 0xf8; + if ((addr < flash_limit + 0x10000) && + check_radio_magic(addr + 0x10000)) + radio_config = addr + 0x10000; + + if (radio_config) { + /* broken board data detected, use radio data to find the offset, + * user will fix this */ + broken_boarddata = 1; + return 1; + } + return 0; +} + +static u8 *find_board_config(char *flash_limit, bool broken) +{ + char *addr; + int found = 0; + + for (addr = (char *) (flash_limit - 0x1000); + addr >= (char *) (flash_limit - 0x30000); + addr -= 0x1000) { + + if (check_board_data(flash_limit, addr, broken)) { + found = 1; + break; + } + } + + if (!found) + addr = NULL; + + return addr; +} + +static u8 *find_radio_config(char *flash_limit, char *board_config) +{ + int dataFound; + char *radio_config; + + /* + * Now find the start of Radio Configuration data, using heuristics: + * Search forward from Board Configuration data by 0x1000 bytes + * at a time until we find non-0xffffffff. + */ + dataFound = 0; + for (radio_config = board_config + 0x1000; + (radio_config < flash_limit); + radio_config += 0x1000) { + if ((*(u32 *)radio_config != 0xffffffff) && + check_radio_magic(radio_config)) { + dataFound = 1; + break; + } + } + +#ifdef CONFIG_ATHEROS_AR5315 + if (!dataFound) { /* AR2316 relocates radio config to new location */ + for (radio_config = board_config + 0xf8; + (radio_config < flash_limit - 0x1000 + 0xf8); + radio_config += 0x1000) { + if ((*(u32 *)radio_config != 0xffffffff) && + check_radio_magic(radio_config)) { + dataFound = 1; + break; + } + } + } +#endif + + if (!dataFound) { + printk("Could not find Radio Configuration data\n"); + radio_config = 0; + } + + return (u8 *) radio_config; +} + +int __init ar531x_find_config(char *flash_limit) +{ + struct ar531x_boarddata *bd; + unsigned int rcfg_size; + char *bcfg, *rcfg; + + /* Copy the board and radio data to RAM, because with the new + * spiflash driver, accessing the mapped memory directly is no + * longer safe */ + + bcfg = find_board_config(flash_limit, false); + if (!bcfg) + bcfg = find_board_config(flash_limit, true); + if (!bcfg) { + printk("WARNING: No board configuration data found!\n"); + return -ENODEV; + } + + board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); + memcpy(board_config, bcfg, 0x100); + if (broken_boarddata) { + printk("WARNING: broken board data detected\n"); + bd = (struct ar531x_boarddata *)board_config; + if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) { + printk("Fixing up empty mac addresses\n"); + bd->enet0Mac[1] = 0x13; + bd->enet0Mac[2] = 0x37; + get_random_bytes(bd->enet0Mac + 3, 3); + bd->wlan0Mac[1] = 0x13; + bd->wlan0Mac[2] = 0x37; + get_random_bytes(bd->wlan0Mac + 3, 3); + } + } + + + /* Radio config starts 0x100 bytes after board config, regardless + * of what the physical layout on the flash chip looks like */ + + if (radio_config) + rcfg = radio_config; + else + rcfg = find_radio_config(flash_limit, bcfg); + + if (!rcfg) + return -ENODEV; + + radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff); + printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config); + rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config); + memcpy(radio_config, rcfg, rcfg_size); + + return 0; +} + +void __init serial_setup(unsigned long mapbase, unsigned int uartclk) +{ + struct uart_port s; + + memset(&s, 0, sizeof(s)); + + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + s.iotype = UPIO_MEM; + s.irq = AR531X_MISC_IRQ_UART0; + s.regshift = 2; + s.mapbase = mapbase; + s.uartclk = uartclk; + s.membase = (void __iomem *)s.mapbase; + + early_serial_setup(&s); +} + +void __init plat_mem_setup(void) +{ + DO_AR5312(ar5312_plat_setup();) + DO_AR5315(ar5315_plat_setup();) + + /* Disable data watchpoints */ + write_c0_watchlo0(0); +} + +const char *get_system_type(void) +{ + switch (mips_machtype) { +#ifdef CONFIG_ATHEROS_AR5312 + case MACH_ATHEROS_AR5312: + return "Atheros AR5312"; + + case MACH_ATHEROS_AR2312: + return "Atheros AR2312"; + + case MACH_ATHEROS_AR2313: + return "Atheros AR2313"; +#endif +#ifdef CONFIG_ATHEROS_AR5315 + case MACH_ATHEROS_AR2315: + return "Atheros AR2315"; + case MACH_ATHEROS_AR2316: + return "Atheros AR2316"; + case MACH_ATHEROS_AR2317: + return "Atheros AR2317"; + case MACH_ATHEROS_AR2318: + return "Atheros AR2318"; +#endif + } + return "Atheros (unknown)"; +} + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) +void __init plat_timer_setup(struct irqaction *irq) +{ + unsigned int count; + + /* Usually irq is timer_irqaction (timer_interrupt) */ + setup_irq(AR531X_IRQ_CPU_CLOCK, irq); + + /* to generate the first CPU timer interrupt */ + count = read_c0_count(); + write_c0_compare(count + 1000); +} +#endif + +asmlinkage void plat_irq_dispatch(void) +{ + DO_AR5312(ar5312_irq_dispatch();) + DO_AR5315(ar5315_irq_dispatch();) +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) +void (*board_time_init)(void); +void __init plat_time_init(void) { + board_time_init(); +} +#endif + +void __init arch_init_irq(void) +{ + clear_c0_status(ST0_IM); + mips_cpu_irq_init(); + + /* Initialize interrupt controllers */ + DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);) + DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);) +} + +static int __init ar531x_register_gpiodev(void) +{ + static struct resource res = { + .start = 0xFFFFFFFF, + }; + struct platform_device *pdev; + + printk(KERN_INFO "ar531x: Registering GPIODEV device\n"); + + pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); + + if (!pdev) { + printk(KERN_ERR "ar531x: GPIODEV init failed\n"); + return -ENODEV; + } + + return 0; +} + +device_initcall(ar531x_register_gpiodev); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c new file mode 100644 index 0000000000..82617cdd3c --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright MontaVista Software Inc + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +/* + * Prom setup file for ar531x + */ + +#include <linux/init.h> +#include <linux/autoconf.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/bootmem.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> +#include <ar531x.h> + +void __init prom_init(void) +{ + char **argv; + + mips_machtype = -1; + + DO_AR5312(ar5312_prom_init();) + DO_AR5315(ar5315_prom_init();) +#if 0 + argv = (char **)fw_arg1; + /* RedBoot desired command line is argv[1] */ + strcat(arcs_cmdline, argv[1]); +#endif +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c new file mode 100644 index 0000000000..eb525da207 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c @@ -0,0 +1,162 @@ +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/kobject.h> +#include <linux/workqueue.h> +#include <linux/skbuff.h> +#include <linux/netlink.h> +#include <net/sock.h> +#include <asm/uaccess.h> +#include <ar531x.h> + +#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio)) + +struct event_t { + struct work_struct wq; + int set; + unsigned long jiffies; +}; + +static struct ar531x_boarddata *bcfg; +static struct timer_list rst_button_timer; + +extern struct sock *uevent_sock; +extern u64 uevent_next_seqnum(void); +static unsigned long seen; + +static inline void add_msg(struct sk_buff *skb, char *msg) +{ + char *scratch; + scratch = skb_put(skb, strlen(msg) + 1); + sprintf(scratch, msg); +} + +static void hotplug_button(struct work_struct *wq) +{ + struct sk_buff *skb; + struct event_t *event; + size_t len; + char *scratch, *s; + char buf[128]; + + event = container_of(wq, struct event_t, wq); + if (!uevent_sock) + goto done; + + /* allocate message with the maximum possible size */ + s = event->set ? "pressed" : "released"; + len = strlen(s) + 2; + skb = alloc_skb(len + 2048, GFP_KERNEL); + if (!skb) + goto done; + + /* add header */ + scratch = skb_put(skb, len); + sprintf(scratch, "%s@",s); + + /* copy keys to our continuous event payload buffer */ + add_msg(skb, "HOME=/"); + add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); + add_msg(skb, "SUBSYSTEM=button"); + add_msg(skb, "BUTTON=reset"); + add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released")); + sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ); + add_msg(skb, buf); + snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); + add_msg(skb, buf); + + NETLINK_CB(skb).dst_group = 1; + netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); + +done: + kfree(event); +} + +static int no_release_workaround = 1; + +static void +reset_button_poll(unsigned long unused) +{ + struct event_t *event; + int gpio = ~0; + + if(!no_release_workaround) + return; + + DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) + gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE); + if(gpio) + { + rst_button_timer.expires = jiffies + (HZ / 4); + add_timer(&rst_button_timer); + } else { + event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); + if (!event) + { + printk("Could not alloc hotplug event\n"); + return; + } + event->set = 0; + event->jiffies = jiffies; + INIT_WORK(&event->wq, (void *)(void *)hotplug_button); + schedule_work(&event->wq); + } +} + +static irqreturn_t button_handler(int irq, void *dev_id) +{ + static int pressed = 0; + struct event_t *event; + u32 gpio = ~0; + + event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); + if (!event) + return IRQ_NONE; + + pressed = !pressed; + + DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) + gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE); + + event->set = gpio; + if(!event->set) + no_release_workaround = 0; + + event->jiffies = jiffies; + + INIT_WORK(&event->wq, (void *)(void *)hotplug_button); + schedule_work(&event->wq); + + seen = jiffies; + if(event->set && no_release_workaround) + mod_timer(&rst_button_timer, jiffies + (HZ / 4)); + + return IRQ_HANDLED; +} + +void ar531x_disable_reset_button(void) +{ + disable_irq(AR531X_RESET_GPIO_IRQ); +} + +EXPORT_SYMBOL(ar531x_disable_reset_button); + +int __init ar531x_init_reset(void) +{ + bcfg = (struct ar531x_boarddata *) board_config; + + seen = jiffies; + + init_timer(&rst_button_timer); + rst_button_timer.function = reset_button_poll; + rst_button_timer.expires = jiffies + HZ / 50; + add_timer(&rst_button_timer); + + request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL); + + return 0; +} + + + +module_init(ar531x_init_reset); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h new file mode 100644 index 0000000000..afa3aefdad --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h @@ -0,0 +1,234 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +#ifndef AR5312_H +#define AR5312_H + +#include <asm/addrspace.h> + +/* + * IRQs + */ + +#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ +#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ +#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ +#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ +#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ + + +/* Address Map */ +#define AR531X_WLAN0 0x18000000 +#define AR531X_WLAN1 0x18500000 +#define AR531X_ENET0 0x18100000 +#define AR531X_ENET1 0x18200000 +#define AR531X_SDRAMCTL 0x18300000 +#define AR531X_FLASHCTL 0x18400000 +#define AR531X_APBBASE 0x1c000000 +#define AR531X_FLASH 0x1e000000 +#define AR531X_UART0 0xbc000003 /* UART MMR */ + +/* + * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that + * should be considered available. The AR5312 supports 2 enet MACS, + * even though many reference boards only actually use 1 of them + * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. + * The AR2312 supports 1 enet MAC. + */ +#define AR531X_NUM_ENET_MAC 2 + +/* + * Need these defines to determine true number of ethernet MACs + */ +#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ +#define AR531X_RADIO_MASK_OFF 0xc8 +#define AR531X_RADIO0_MASK 0x0003 +#define AR531X_RADIO1_MASK 0x000c +#define AR531X_RADIO1_S 2 + +/* + * AR531X_NUM_WMAC defines the number of Wireless MACs that\ + * should be considered available. + */ +#define AR531X_NUM_WMAC 2 + +/* Reset/Timer Block Address Map */ +#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) +#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ +#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ +#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ +#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ +#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ +#define AR531X_RESET (AR531X_RESETTMR + 0x0020) +#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) +#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) +#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) +#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) +#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) +#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) +#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ +#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ + +/* AR531X_WD_CTRL register bit field definitions */ +#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 +#define AR531X_WD_CTRL_NMI 0x0001 +#define AR531X_WD_CTRL_RESET 0x0002 + +/* AR531X_ISR register bit field definitions */ +#define AR531X_ISR_NONE 0x0000 +#define AR531X_ISR_TIMER 0x0001 +#define AR531X_ISR_AHBPROC 0x0002 +#define AR531X_ISR_AHBDMA 0x0004 +#define AR531X_ISR_GPIO 0x0008 +#define AR531X_ISR_UART0 0x0010 +#define AR531X_ISR_UART0DMA 0x0020 +#define AR531X_ISR_WD 0x0040 +#define AR531X_ISR_LOCAL 0x0080 + +/* AR531X_RESET register bit field definitions */ +#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ +#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ +#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ +#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ +#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ +#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ +#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ +#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ +#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ +#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ +#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ +#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ +#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ +#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ +#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ +#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ +#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ +#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ + +#define AR531X_RESET_WMAC0_BITS \ + AR531X_RESET_WLAN0 |\ + AR531X_RESET_WARM_WLAN0_MAC |\ + AR531X_RESET_WARM_WLAN0_BB + +#define AR531X_RESERT_WMAC1_BITS \ + AR531X_RESET_WLAN1 |\ + AR531X_RESET_WARM_WLAN1_MAC |\ + AR531X_RESET_WARM_WLAN1_BB + +/* AR5312_CLOCKCTL1 register bit field definitions */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR5312 and AR2312 */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR2313 */ +#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 +#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 +#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 +#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 +#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 + + +/* AR531X_ENABLE register bit field definitions */ +#define AR531X_ENABLE_WLAN0 0x0001 +#define AR531X_ENABLE_ENET0 0x0002 +#define AR531X_ENABLE_ENET1 0x0004 +#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ +#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ +#define AR531X_ENABLE_WLAN1 \ + (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) + +/* AR531X_REV register bit field definitions */ +#define AR531X_REV_WMAC_MAJ 0xf000 +#define AR531X_REV_WMAC_MAJ_S 12 +#define AR531X_REV_WMAC_MIN 0x0f00 +#define AR531X_REV_WMAC_MIN_S 8 +#define AR531X_REV_MAJ 0x00f0 +#define AR531X_REV_MAJ_S 4 +#define AR531X_REV_MIN 0x000f +#define AR531X_REV_MIN_S 0 +#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define AR531X_REV_MAJ_AR5312 0x4 +#define AR531X_REV_MAJ_AR2313 0x5 + +/* Minor revision numbers, bits 3..0 of Revision ID register */ +#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ +#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ + +/* AR531X_FLASHCTL register bit field definitions */ +#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ +#define FLASHCTL_IDCY_S 0 +#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ +#define FLASHCTL_WST1_S 5 +#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ +#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ +#define FLASHCTL_WST2_S 11 +#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ +#define FLASHCTL_AC_S 16 +#define FLASHCTL_AC_128K 0x00000000 +#define FLASHCTL_AC_256K 0x00010000 +#define FLASHCTL_AC_512K 0x00020000 +#define FLASHCTL_AC_1M 0x00030000 +#define FLASHCTL_AC_2M 0x00040000 +#define FLASHCTL_AC_4M 0x00050000 +#define FLASHCTL_AC_8M 0x00060000 +#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ +#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ +#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ +#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ +#define FLASHCTL_WP 0x04000000 /* Write protect */ +#define FLASHCTL_BM 0x08000000 /* Burst mode */ +#define FLASHCTL_MW 0x30000000 /* Memory width */ +#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ +#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ +#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ +#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ +#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ +#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ + +/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ +#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) +#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) +#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) + +/* ARM SDRAM Controller -- just enough to determine memory size */ +#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) +#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ +#define MEM_CFG1_AC0_S 8 +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ +#define MEM_CFG1_AC1_S 12 + +/* GPIO Address Map */ +#define AR531X_GPIO (AR531X_APBBASE + 0x2000) +#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ +#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ +#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ + +/* GPIO Control Register bit field definitions */ +#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ +#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ +#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ +#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ +#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ + +#endif + diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h new file mode 100644 index 0000000000..8ad8810b3c --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h @@ -0,0 +1,694 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + */ + +#ifndef AR5315_H +#define AR5315_H + +/* + * IRQs + */ +#define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ +#define AR5315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ +#define AR5315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ +#define AR5315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ +#define AR5315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ + + +/* + * Address map + */ +#define AR5315_SDRAM0 0x00000000 /* DRAM */ +#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */ +#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */ +#define AR5315_PCI 0xB0100000 /* PCI MMR */ +#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */ +#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */ +#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */ +#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ +#define AR5315_UART0 0xB1100003 /* UART MMR */ +#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */ +#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ +#define AR5315_RAM1 0x40000000 /* ram alias */ +#define AR5315_PCIEXT 0x80000000 /* pci external */ +#define AR5315_RAM2 0xc0000000 /* ram alias */ +#define AR5315_RAM3 0xe0000000 /* ram alias */ + +/* + * Reset Register + */ +#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000) + +/* Cold Reset */ +#define RESET_COLD_AHB 0x00000001 +#define RESET_COLD_APB 0x00000002 +#define RESET_COLD_CPU 0x00000004 +#define RESET_COLD_CPUWARM 0x00000008 +#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ + +#define AR5317_RESET_SYSTEM 0x00000010 + +/* Warm Reset */ + +#define AR5315_RESET (AR5315_DSLBASE + 0x0004) + +#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ +#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ +#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ +#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ +#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ +#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */ +#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ +#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */ +#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */ +#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ +#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ +#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ + +/* + * AHB master arbitration control + */ +#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008) + +#define ARB_CPU 0x00000001 /* CPU, default */ +#define ARB_WLAN 0x00000002 /* WLAN */ +#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ +#define ARB_LOCAL 0x00000008 /* LOCAL */ +#define ARB_PCI 0x00000010 /* PCI */ +#define ARB_ETHERNET 0x00000020 /* Ethernet */ +#define ARB_RETRY 0x00000100 /* retry policy, debug only */ + +/* + * Config Register + */ +#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c) + +#define AR5315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ +#define AR5315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ +#define AR5315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ +#define AR5315_CONFIG_PCI 0x00000008 /* PCI byteswap */ +#define AR5315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ +#define AR5315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ +#define AR5315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ + +#define AR5315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ +#define AR5315_CONFIG_CPU 0x00000400 /* CPU big endian */ +#define AR5315_CONFIG_PCIAHB 0x00000800 +#define AR5315_CONFIG_PCIAHB_BRIDGE 0x00001000 +#define AR5315_CONFIG_SPI 0x00008000 /* SPI byteswap */ +#define AR5315_CONFIG_CPU_DRAM 0x00010000 +#define AR5315_CONFIG_CPU_PCI 0x00020000 +#define AR5315_CONFIG_CPU_MMR 0x00040000 +#define AR5315_CONFIG_BIG 0x00000400 + + +/* + * NMI control + */ +#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010) + +#define NMI_EN 1 + +/* + * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). + */ +#define AR5315_SREV (AR5315_DSLBASE + 0x0014) + +#define AR5315_REV_MAJ 0x00f0 +#define AR5315_REV_MAJ_S 4 +#define AR5315_REV_MIN 0x000f +#define AR5315_REV_MIN_S 0 +#define AR5315_REV_CHIP (AR5315_REV_MAJ|AR5315_REV_MIN) + +/* + * Interface Enable + */ +#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018) + +#define IF_MASK 0x00000007 +#define IF_DISABLED 0 +#define IF_PCI 1 +#define IF_TS_LOCAL 2 +#define IF_ALL 3 /* only for emulation with separate pins */ +#define IF_LOCAL_HOST 0x00000008 +#define IF_PCI_HOST 0x00000010 +#define IF_PCI_INTR 0x00000020 +#define IF_PCI_CLK_MASK 0x00030000 +#define IF_PCI_CLK_INPUT 0 +#define IF_PCI_CLK_OUTPUT_LOW 1 +#define IF_PCI_CLK_OUTPUT_CLK 2 +#define IF_PCI_CLK_OUTPUT_HIGH 3 +#define IF_PCI_CLK_SHIFT 16 + + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define REV_MAJ_AR5311 0x01 +#define REV_MAJ_AR5312 0x04 +#define REV_MAJ_AR5315 0x0B + +/* + * APB Interrupt control + */ + +#define AR5315_ISR (AR5315_DSLBASE + 0x0020) +#define AR5315_IMR (AR5315_DSLBASE + 0x0024) +#define AR5315_GISR (AR5315_DSLBASE + 0x0028) + +#define AR5315_ISR_UART0 0x0001 /* high speed UART */ +#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */ +#define AR5315_ISR_SPI 0x0004 /* SPI bus */ +#define AR5315_ISR_AHB 0x0008 /* AHB error */ +#define AR5315_ISR_APB 0x0010 /* APB error */ +#define AR5315_ISR_TIMER 0x0020 /* timer */ +#define AR5315_ISR_GPIO 0x0040 /* GPIO */ +#define AR5315_ISR_WD 0x0080 /* watchdog */ +#define AR5315_ISR_IR_RSVD 0x0100 /* IR */ + +#define AR5315_GISR_MISC 0x0001 +#define AR5315_GISR_WLAN0 0x0002 +#define AR5315_GISR_MPEGTS_RSVD 0x0004 +#define AR5315_GISR_LOCALPCI 0x0008 +#define AR5315_GISR_WMACPOLL 0x0010 +#define AR5315_GISR_TIMER 0x0020 +#define AR5315_GISR_ETHERNET 0x0040 + +/* + * Interrupt routing from IO to the processor IP bits + * Define our inter mask and level + */ +#define AR5315_INTR_MISCIO SR_IBIT3 +#define AR5315_INTR_WLAN0 SR_IBIT4 +#define AR5315_INTR_ENET0 SR_IBIT5 +#define AR5315_INTR_LOCALPCI SR_IBIT6 +#define AR5315_INTR_WMACPOLL SR_IBIT7 +#define AR5315_INTR_COMPARE SR_IBIT8 + +/* + * Timers + */ +#define AR5315_TIMER (AR5315_DSLBASE + 0x0030) +#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034) +#define AR5315_WD (AR5315_DSLBASE + 0x0038) +#define AR5315_WDC (AR5315_DSLBASE + 0x003c) + +#define WDC_RESET 0x00000002 /* reset on watchdog */ +#define WDC_NMI 0x00000001 /* NMI on watchdog */ +#define WDC_IGNORE_EXPIRATION 0x00000000 + +/* + * CPU Performance Counters + */ +#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048) +#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c) + +#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ +#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ +#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ +#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ +#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ +#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ +#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ + +#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ +#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ +#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ +#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ +#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ +#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ +#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ + +/* + * AHB Error Reporting. + */ +#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */ +#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */ +#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */ +#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */ +#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */ + +#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ + /* write 1 to clear all bits in ERR0 */ +#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ +#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ + +#define PROCERR_HMAST 0x0000000f +#define PROCERR_HMAST_DFLT 0 +#define PROCERR_HMAST_WMAC 1 +#define PROCERR_HMAST_ENET 2 +#define PROCERR_HMAST_PCIENDPT 3 +#define PROCERR_HMAST_LOCAL 4 +#define PROCERR_HMAST_CPU 5 +#define PROCERR_HMAST_PCITGT 6 + +#define PROCERR_HMAST_S 0 +#define PROCERR_HWRITE 0x00000010 +#define PROCERR_HSIZE 0x00000060 +#define PROCERR_HSIZE_S 5 +#define PROCERR_HTRANS 0x00000180 +#define PROCERR_HTRANS_S 7 +#define PROCERR_HBURST 0x00000e00 +#define PROCERR_HBURST_S 9 + + + +/* + * Clock Control + */ +#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064) +#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068) +#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c) +#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070) +#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074) +#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080) +#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084) + +/* PLLc Control fields */ +#define PLLC_REF_DIV_M 0x00000003 +#define PLLC_REF_DIV_S 0 +#define PLLC_FDBACK_DIV_M 0x0000007C +#define PLLC_FDBACK_DIV_S 2 +#define PLLC_ADD_FDBACK_DIV_M 0x00000080 +#define PLLC_ADD_FDBACK_DIV_S 7 +#define PLLC_CLKC_DIV_M 0x0001c000 +#define PLLC_CLKC_DIV_S 14 +#define PLLC_CLKM_DIV_M 0x00700000 +#define PLLC_CLKM_DIV_S 20 + +/* CPU CLK Control fields */ +#define CPUCLK_CLK_SEL_M 0x00000003 +#define CPUCLK_CLK_SEL_S 0 +#define CPUCLK_CLK_DIV_M 0x0000000c +#define CPUCLK_CLK_DIV_S 2 + +/* AMBA CLK Control fields */ +#define AMBACLK_CLK_SEL_M 0x00000003 +#define AMBACLK_CLK_SEL_S 0 +#define AMBACLK_CLK_DIV_M 0x0000000c +#define AMBACLK_CLK_DIV_S 2 + +#if defined(COBRA_EMUL) +#define AR5315_AMBA_CLOCK_RATE 20000000 +#define AR5315_CPU_CLOCK_RATE 40000000 +#else +#if defined(DEFAULT_PLL) +#define AR5315_AMBA_CLOCK_RATE 40000000 +#define AR5315_CPU_CLOCK_RATE 40000000 +#else +#define AR5315_AMBA_CLOCK_RATE 92000000 +#define AR5315_CPU_CLOCK_RATE 184000000 +#endif /* ! DEFAULT_PLL */ +#endif /* ! COBRA_EMUL */ + +#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE +#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE + +/* + * The UART computes baud rate as: + * baud = clock / (16 * divisor) + * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). + */ +#define DESIRED_BAUD_RATE 38400 + + +#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ + + + /* + * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. + */ +#define ASSOC_STATUS_M 0x00000003 +#define ASSOC_STATUS_NONE 0 +#define ASSOC_STATUS_PENDING 1 +#define ASSOC_STATUS_ASSOCIATED 2 +#define LED_MODE_M 0x0000001c +#define LED_BLINK_THRESHOLD_M 0x000000e0 +#define LED_SLOW_BLINK_MODE 0x00000100 + +/* + * GPIO + */ + +#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088) +#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090) +#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098) +#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0) + +#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ +#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */ +#define AR5315_GPIO_CR_I(x) (0) /* input */ + +#define AR5315_GPIO_INT_S(x) (x) /* interrupt enable */ +#define AR5315_GPIO_INT_M (0x3F) /* mask for int */ +#define AR5315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ +#define AR5315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ + +#define AR5315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */ +#define AR5315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ +#define AR5315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ +#define AR5315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ +#define AR5315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ + +#define AR5315_RESET_GPIO 5 +#define AR5315_NUM_GPIO 22 + + +/* + * PCI Clock Control + */ + +#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4) + +#define AR5315_PCICLK_INPUT_M 0x3 +#define AR5315_PCICLK_INPUT_S 0 + +#define AR5315_PCICLK_PLLC_CLKM 0 +#define AR5315_PCICLK_PLLC_CLKM1 1 +#define AR5315_PCICLK_PLLC_CLKC 2 +#define AR5315_PCICLK_REF_CLK 3 + +#define AR5315_PCICLK_DIV_M 0xc +#define AR5315_PCICLK_DIV_S 2 + +#define AR5315_PCICLK_IN_FREQ 0 +#define AR5315_PCICLK_IN_FREQ_DIV_6 1 +#define AR5315_PCICLK_IN_FREQ_DIV_8 2 +#define AR5315_PCICLK_IN_FREQ_DIV_10 3 + +/* + * Observation Control Register + */ +#define AR5315_OCR (AR5315_DSLBASE + 0x00b0) +#define OCR_GPIO0_IRIN 0x0040 +#define OCR_GPIO1_IROUT 0x0080 +#define OCR_GPIO3_RXCLR 0x0200 + +/* + * General Clock Control + */ + +#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4) +#define MISCCLK_PLLBYPASS_EN 0x00000001 +#define MISCCLK_PROCREFCLK 0x00000002 + +/* + * SDRAM Controller + * - No read or write buffers are included. + */ +#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00) +#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c) +#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10) + +#define SDRAM_DATA_WIDTH_M 0x00006000 +#define SDRAM_DATA_WIDTH_S 13 + +#define SDRAM_COL_WIDTH_M 0x00001E00 +#define SDRAM_COL_WIDTH_S 9 + +#define SDRAM_ROW_WIDTH_M 0x000001E0 +#define SDRAM_ROW_WIDTH_S 5 + +#define SDRAM_BANKADDR_BITS_M 0x00000018 +#define SDRAM_BANKADDR_BITS_S 3 + +/* + * SPI Flash Interface Registers + */ + +#define AR5315_SPI_CTL (AR5315_SPI + 0x00) +#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04) +#define AR5315_SPI_DATA (AR5315_SPI + 0x08) + +#define SPI_CTL_START 0x00000100 +#define SPI_CTL_BUSY 0x00010000 +#define SPI_CTL_TXCNT_MASK 0x0000000f +#define SPI_CTL_RXCNT_MASK 0x000000f0 +#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff +#define SPI_CTL_SIZE_MASK 0x00060000 + +#define SPI_CTL_CLK_SEL_MASK 0x03000000 +#define SPI_OPCODE_MASK 0x000000ff + +/* + * PCI-MAC Configuration registers + */ +#define PCI_MAC_RC (AR5315_PCI + 0x4000) +#define PCI_MAC_SCR (AR5315_PCI + 0x4004) +#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008) +#define PCI_MAC_SFR (AR5315_PCI + 0x400C) +#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010) +#define PCI_MAC_SREV (AR5315_PCI + 0x4020) + +#define PCI_MAC_RC_MAC 0x00000001 +#define PCI_MAC_RC_BB 0x00000002 + +#define PCI_MAC_SCR_SLMODE_M 0x00030000 +#define PCI_MAC_SCR_SLMODE_S 16 +#define PCI_MAC_SCR_SLM_FWAKE 0 +#define PCI_MAC_SCR_SLM_FSLEEP 1 +#define PCI_MAC_SCR_SLM_NORMAL 2 + +#define PCI_MAC_SFR_SLEEP 0x00000001 + +#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 + + +/* + * PCI Bus Interface Registers + */ +#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008) +#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c) +#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ +#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ +#define AR5315_PCIMISC_RST_MODE 0x00000030 +#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ +#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ +#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ +#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ +#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ +#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ +#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ +#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ + +#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010) + +#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014) + +#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100) +#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */ +#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */ +#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */ +#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */ + +#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104) +#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ +#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ +#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ +#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ + +#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200) + +#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400) +#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ + +#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404) +#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ + +#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408) + +#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */ +#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */ +#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */ +#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */ +#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ +#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */ +#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */ +#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */ +#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ +#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ +#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */ +#define AR5315_PCI_EXT_INT 0x02000000 +#define AR5315_PCI_ABORT_INT 0x04000000 + +#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */ + +#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508) +#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ +#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ + +#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800) +#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804) +#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810) +#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900) +#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904) +#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908) + + +/* + * Local Bus Interface Registers + */ +#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000) +#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ +#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ +#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ +#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ +#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ +#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ +#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ +#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ +#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ +#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ +#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ +#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ +#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ +#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ +#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ +#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ +#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ +#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ +#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ +#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ +#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ +#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ +#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ +#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ +#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ + +#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004) +#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */ + +#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008) +#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C) +#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ +#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ +#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ +#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ +#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80 +#define AR5315_LBM_TIMEOUT_SHFT 7 +#define AR5315_LBM_PORTMUX 0x07000000 + + +#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010) + +#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100) +#define AR5315_LB_TXEN_0 0x01 +#define AR5315_LB_TXEN_1 0x02 +#define AR5315_LB_TXEN_2 0x04 +#define AR5315_LB_TXEN_3 0x08 + +#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104) +#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200) + +#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400) +#define AR5315_LB_RXEN 0x01 + +#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404) +#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408) + +#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500) +#define AR5315_INT_TX_DESC 0x0001 +#define AR5315_INT_TX_OK 0x0002 +#define AR5315_INT_TX_ERR 0x0004 +#define AR5315_INT_TX_EOF 0x0008 +#define AR5315_INT_RX_DESC 0x0010 +#define AR5315_INT_RX_OK 0x0020 +#define AR5315_INT_RX_ERR 0x0040 +#define AR5315_INT_RX_EOF 0x0080 +#define AR5315_INT_TX_TRUNC 0x0100 +#define AR5315_INT_TX_STARVE 0x0200 +#define AR5315_INT_LB_TIMEOUT 0x0400 +#define AR5315_INT_LB_ERR 0x0800 +#define AR5315_INT_MBOX_WR 0x1000 +#define AR5315_INT_MBOX_RD 0x2000 + +/* Bit definitions for INT MASK are the same as INT_STATUS */ +#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504) + +#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508) +#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600) + + + +/* + * IR Interface Registers + */ +#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000) + +#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */ + +#define AR5315_IR_CONTROL (AR5315_IR + 0x0800) +#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */ +#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */ +#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ +#define AR5315_IRCTL_SAMPLECLK_SHFT 1 +#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ +#define AR5315_IRCTL_OUTPUTCLK_SHFT 14 + +#define AR5315_IR_STATUS (AR5315_IR + 0x0804) +#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */ +#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */ + +#define AR5315_IR_CONFIG (AR5315_IR + 0x0808) +#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */ +#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ +#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ +#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ +#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ +#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ +#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ +#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ +#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ + +/* + * PCI memory constants: Memory area 1 and 2 are the same size - + * (twice the PCI_TLB_PAGE_SIZE). The definition of + * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine + * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size + * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. + */ + +#define CPU_TO_PCI_MEM_BASE1 0xE0000000 +#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) + + +/* TLB attributes for PCI transactions */ + +#define PCI_MMU_PAGEMASK 0x00003FFF +#define MMU_PAGE_UNCACHED 0x00000010 +#define MMU_PAGE_DIRTY 0x00000004 +#define MMU_PAGE_VALID 0x00000002 +#define MMU_PAGE_GLOBAL 0x00000001 +#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ + MMU_PAGE_VALID|MMU_PAGE_GLOBAL) +#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ +#define PCI_MEMORY_SPACE1_PHYS 0x80000000 +#define PCI_TLB_PAGE_SIZE 0x01000000 +#define TLB_HI_MASK 0xFFFFE000 +#define TLB_LO_MASK 0x3FFFFFFF +#define PAGEMASK_SHIFT 11 +#define TLB_LO_SHIFT 6 + +#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ + +#define HOST_PCI_DEV_ID 3 +#define HOST_PCI_MBAR0 0x10000000 +#define HOST_PCI_MBAR1 0x20000000 +#define HOST_PCI_MBAR2 0x30000000 + +#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 +#define PCI_DEVICE_MEM_SPACE 0x800000 + +#endif + diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h new file mode 100644 index 0000000000..8148b76fba --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h @@ -0,0 +1,149 @@ +#ifndef __AR531X_H +#define __AR531X_H + +#include <linux/version.h> +#include <asm/cpu-info.h> +#include <ar531x_platform.h> +#include <ar5312/ar5312.h> +#include <ar5315/ar5315.h> + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) +extern void (*board_time_init)(void); +#endif + +/* + * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are + * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime. + */ +#ifdef CONFIG_ATHEROS_AR5312 +#define DO_AR5312(...) \ + if (current_cpu_data.cputype != CPU_4KEC) { \ + __VA_ARGS__ \ + } +#else +#define DO_AR5312(...) +#endif +#ifdef CONFIG_ATHEROS_AR5315 +#define DO_AR5315(...) \ + if (current_cpu_data.cputype == CPU_4KEC) { \ + __VA_ARGS__ \ + } +#else +#define DO_AR5315(...) +#endif + +#define AR531X_MISC_IRQ_BASE 0x20 +#define AR531X_GPIO_IRQ_BASE 0x30 + +/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ +#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 +#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ + +/* Miscellaneous interrupts, which share IP6 */ +#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 +#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 +#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 +#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 +#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 +#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 +#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 +#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 +#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 +#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9 +#define AR531X_MISC_IRQ_COUNT 10 + +/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ +#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0 +#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n +#define AR531X_GPIO_IRQ_COUNT 22 + +#define sysRegRead(phys) \ + (*(volatile u32 *)KSEG1ADDR(phys)) + +#define sysRegWrite(phys, val) \ + ((*(volatile u32 *)KSEG1ADDR(phys)) = (val)) + +/* + * This is board-specific data that is stored in a "fixed" location in flash. + * It is shared across operating systems, so it should not be changed lightly. + * The main reason we need it is in order to extract the ethernet MAC + * address(es). + */ +struct ar531x_boarddata { + u32 magic; /* board data is valid */ +#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ + u16 cksum; /* checksum (starting with BD_REV 2) */ + u16 rev; /* revision of this struct */ +#define BD_REV 4 + char boardName[64]; /* Name of board */ + u16 major; /* Board major number */ + u16 minor; /* Board minor number */ + u32 config; /* Board configuration */ +#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ +#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ +#define BD_UART1 0x00000004 /* UART1 is stuffed */ +#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ +#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ +#define BD_SYSLED 0x00000020 /* System LED stuffed */ +#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ +#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ +#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ + u16 resetConfigGpio; /* Reset factory GPIO pin */ + u16 sysLedGpio; /* System LED GPIO pin */ + + u32 cpuFreq; /* CPU core frequency in Hz */ + u32 sysFreq; /* System frequency in Hz */ + u32 cntFreq; /* Calculated C0_COUNT frequency */ + + u8 wlan0Mac[6]; + u8 enet0Mac[6]; + u8 enet1Mac[6]; + + u16 pciId; /* Pseudo PCIID for common code */ + u16 memCap; /* cap bank1 in MB */ + + /* version 3 */ + u8 wlan1Mac[6]; /* (ar5212) */ +}; + +#define BOARD_CONFIG_BUFSZ 0x1000 + +extern char *board_config, *radio_config; +extern void serial_setup(unsigned long mapbase, unsigned int uartclk); +extern int ar531x_find_config(char *flash_limit); + +extern void ar5312_prom_init(void); +extern void ar5312_misc_intr_init(int irq_base); +extern void ar5312_plat_setup(void); +extern asmlinkage void ar5312_irq_dispatch(void); + +extern void ar5315_prom_init(void); +extern void ar5315_misc_intr_init(int irq_base); +extern void ar5315_plat_setup(void); +extern asmlinkage void ar5315_irq_dispatch(void); +extern void ar5315_pci_irq(int irq); +static inline u32 sysRegMask(u32 phys, u32 mask, u32 value) +{ + u32 reg; + + reg = sysRegRead(phys); + reg &= ~mask; + reg |= value & mask; + sysRegWrite(phys, reg); + reg = sysRegRead(phys); /* flush write to the hardware */ + + return reg; +} + +#define AR531X_NUM_GPIO 8 + +#endif diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h new file mode 100644 index 0000000000..bddcd59a0b --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h @@ -0,0 +1,28 @@ +#ifndef __AR531X_PLATFORM_H +#define __AR531X_PLATFORM_H + +/* + * Board support data. The driver is required to locate + * and fill-in this information before passing a reference to + * this structure as the HAL_BUS_TAG parameter supplied to + * ath_hal_attach. + */ +struct ar531x_config { + const char *board; /* board config data */ + const char *radio; /* radio config data */ + int unit; /* unit number [0, 1] */ + u32 tag; /* used as devid for now */ +}; + +struct ar531x_eth { + int phy; + int mac; + u32 reset_base; + u32 reset_mac; + u32 reset_phy; + u32 phy_base; + char *board_config; + char *macaddr; +}; + +#endif /* __AR531X_PLATFORM_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h new file mode 100644 index 0000000000..97f904b5f2 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h @@ -0,0 +1,84 @@ +/* + * Atheros SoC specific CPU feature overrides + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H + +/* + * The ATHEROS SoCs have MIPS 4Kc/4KEc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +/* #define cpu_has_divec ? */ +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 + +#if !defined(CONFIG_ATHEROS_AR5312) +# define cpu_has_llsc 1 +#else +/* + * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the + * ll/sc instructions. + */ +# define cpu_has_llsc 0 +#endif + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 + +#if !defined(CONFIG_ATHEROS_AR5312) +# define cpu_has_mips32r2 1 +#endif + +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +/* #define cpu_dcache_line_size() ? */ +/* #define cpu_icache_line_size() ? */ + +#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h new file mode 100644 index 0000000000..fe53556881 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h @@ -0,0 +1,41 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * + */ +#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H +#define __ASM_MACH_GENERIC_DMA_COHERENCE_H + +#define PCI_DMA_OFFSET 0x20000000 + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h new file mode 100644 index 0000000000..d09e59d2b4 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h @@ -0,0 +1,118 @@ +#ifndef _ATHEROS_GPIO_H_ +#define _ATHEROS_GPIO_H_ + +#include "ar531x.h" + +/* Common AR531X global variables */ +/* extern u32 ar531x_gpio_intr_Mask; */ + +/* AR5312 exported routines */ +#ifdef CONFIG_ATHEROS_AR5312 +asmlinkage void ar5312_gpio_irq_dispatch(void); +#endif + +/* AR5315 exported routines */ +#ifdef CONFIG_ATHEROS_AR5315 +asmlinkage void ar5315_gpio_irq_dispatch(void); +#endif + +/* + * Wrappers for the generic GPIO layer + */ + +/* Sets a gpio to input, or returns ENXIO for non-existent gpio */ +static inline int gpio_direction_input(unsigned gpio) { + DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \ + return -ENXIO; \ + } else { \ + sysRegWrite(AR531X_GPIO_CR, \ + sysRegRead(AR531X_GPIO_CR) | \ + AR531X_GPIO_CR_I(gpio) ); \ + return 0; \ + } \ + ) + DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \ + return -ENXIO; \ + } else { \ + sysRegWrite(AR5315_GPIO_CR, \ + ( sysRegRead(AR5315_GPIO_CR) & \ + ~(AR5315_GPIO_CR_M(gpio)) ) | \ + AR5315_GPIO_CR_I(gpio) ); \ + return 0; \ + } \ + ) + return -ENXIO; +} + +/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */ +static inline int gpio_direction_output(unsigned gpio, int value) { + DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \ + return -ENXIO; \ + } else { \ + sysRegWrite(AR531X_GPIO_DO, \ + ( (sysRegRead(AR531X_GPIO_DO) & \ + ~(1 << gpio) ) | \ + ((value!=0) << gpio)) ); \ + sysRegWrite(AR531X_GPIO_CR, \ + ( sysRegRead(AR531X_GPIO_CR) & \ + ~(AR531X_GPIO_CR_M(gpio)) )); \ + return 0; \ + } \ + ) + DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \ + return -ENXIO; \ + } else { \ + sysRegWrite(AR5315_GPIO_DO, \ + ( (sysRegRead(AR5315_GPIO_DO) & \ + ~(1 << gpio)) | \ + ((value!=0) << gpio)) ); \ + sysRegWrite(AR5315_GPIO_CR, \ + sysRegRead(AR5315_GPIO_CR) | \ + AR5315_GPIO_CR_O(gpio) ); \ + return 0; \ + } \ + ) + return -ENXIO; +} + +/* Reads the gpio pin. Unchecked function */ +static inline int gpio_get_value(unsigned gpio) { + DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));) + DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));) + return 0; +} + +/* Writes to the gpio pin. Unchecked function */ +static inline void gpio_set_value(unsigned gpio, int value) { + DO_AR5312( sysRegWrite(AR531X_GPIO_DO, \ + ( (sysRegRead(AR531X_GPIO_DO) & \ + ~(1 << gpio)) | \ + ((value!=0) << gpio)) ); \ + ) + DO_AR5315( sysRegWrite(AR5315_GPIO_DO, \ + ( (sysRegRead(AR5315_GPIO_DO) & \ + ~(1 << gpio)) | \ + ((value!=0) << gpio)) ); \ + ) +} + +static inline int gpio_request(unsigned gpio, const char *label) { + return 0; +} + +static inline void gpio_free(unsigned gpio) { +} + +/* Returns IRQ to attach for gpio. Unchecked function */ +static inline int gpio_to_irq(unsigned gpio) { + return AR531X_GPIO_IRQ(gpio); +} + +/* Returns gpio for IRQ attached. Unchecked function */ +static inline int irq_to_gpio(unsigned irq) { + return (irq - (AR531X_GPIO_IRQ(0))); +} + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +#endif diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h new file mode 100644 index 0000000000..e9fa4c5b16 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h @@ -0,0 +1,6 @@ +#ifndef __AR531X_RESET_H +#define __AR531X_RESET_H + +void ar531x_disable_reset_button(void); + +#endif /* __AR531X_RESET_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h new file mode 100644 index 0000000000..354c6e6fd1 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + */ +#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H +#define __ASM_MIPS_MACH_ATHEROS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */ diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c new file mode 100644 index 0000000000..92d4fff997 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c @@ -0,0 +1,533 @@ + +/* + * MTD driver for the SPI Flash Memory support. + * + * Copyright (c) 2005-2006 Atheros Communications Inc. + * Copyright (C) 2006-2007 FON Technology, SL. + * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/*=========================================================================== +** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT +** +** This module contains the Serial Flash access routines for the Atheros SOC. +** The Atheros SOC integrates a SPI flash controller that is used to access +** serial flash parts. The SPI flash controller executes in "Little Endian" +** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be +** BYTESWAPPED! The SPI Flash controller hardware by default performs READ +** ONLY byteswapping when accessed via the SPI Flash Alias memory region +** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the +** flash sectors is stored in "Little Endian" format. +** +** The spiflash_write() routine performs byteswapping on all write +** operations. +**===========================================================================*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/version.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/squashfs_fs.h> +#include <linux/root_dev.h> +#include <linux/delay.h> +#include <asm/delay.h> +#include <asm/io.h> +#include "spiflash.h" + +#ifndef __BIG_ENDIAN +#error This driver currently only works with big endian CPU. +#endif + +#define MAX_PARTS 32 + +#define SPIFLASH "spiflash: " + +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + +#define busy_wait(condition, wait) \ + do { \ + while (condition) { \ + spin_unlock_bh(&spidata->mutex); \ + if (wait > 1) \ + msleep(wait); \ + else if ((wait == 1) && need_resched()) \ + schedule(); \ + else \ + udelay(1); \ + spin_lock_bh(&spidata->mutex); \ + } \ + } while (0) + + +static __u32 spiflash_regread32(int reg); +static void spiflash_regwrite32(int reg, __u32 data); +static __u32 spiflash_sendcmd (int op, u32 addr); + +int __init spiflash_init (void); +void __exit spiflash_exit (void); +static int spiflash_probe_chip (void); +static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr); +static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf); +static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf); + +/* Flash configuration table */ +struct flashconfig { + __u32 byte_cnt; + __u32 sector_cnt; + __u32 sector_size; + __u32 cs_addrmask; +} flashconfig_tbl[MAX_FLASH] = + { + { 0, 0, 0, 0}, + { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0}, + { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0}, + { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0}, + { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0}, + { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0} + }; + +/* Mapping of generic opcodes to STM serial flash opcodes */ +#define SPI_WRITE_ENABLE 0 +#define SPI_WRITE_DISABLE 1 +#define SPI_RD_STATUS 2 +#define SPI_WR_STATUS 3 +#define SPI_RD_DATA 4 +#define SPI_FAST_RD_DATA 5 +#define SPI_PAGE_PROGRAM 6 +#define SPI_SECTOR_ERASE 7 +#define SPI_BULK_ERASE 8 +#define SPI_DEEP_PWRDOWN 9 +#define SPI_RD_SIG 10 +#define SPI_MAX_OPCODES 11 + +struct opcodes { + __u16 code; + __s8 tx_cnt; + __s8 rx_cnt; +} stm_opcodes[] = { + {STM_OP_WR_ENABLE, 1, 0}, + {STM_OP_WR_DISABLE, 1, 0}, + {STM_OP_RD_STATUS, 1, 1}, + {STM_OP_WR_STATUS, 1, 0}, + {STM_OP_RD_DATA, 4, 4}, + {STM_OP_FAST_RD_DATA, 5, 0}, + {STM_OP_PAGE_PGRM, 8, 0}, + {STM_OP_SECTOR_ERASE, 4, 0}, + {STM_OP_BULK_ERASE, 1, 0}, + {STM_OP_DEEP_PWRDOWN, 1, 0}, + {STM_OP_RD_SIG, 4, 1}, +}; + +/* Driver private data structure */ +struct spiflash_data { + struct mtd_info *mtd; + struct mtd_partition *parsed_parts; /* parsed partitions */ + void *readaddr; /* memory mapped data for read */ + void *mmraddr; /* memory mapped register space */ + wait_queue_head_t wq; + spinlock_t mutex; + int state; +}; +enum { + FL_READY, + FL_READING, + FL_ERASING, + FL_WRITING +}; + +static struct spiflash_data *spidata; + +extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); + +/***************************************************************************************************/ + +static __u32 +spiflash_regread32(int reg) +{ + volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg); + + return (*data); +} + +static void +spiflash_regwrite32(int reg, __u32 data) +{ + volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg); + + *addr = data; + return; +} + + +static __u32 +spiflash_sendcmd (int op, u32 addr) +{ + u32 reg; + u32 mask; + struct opcodes *ptr_opcode; + + ptr_opcode = &stm_opcodes[op]; + busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0); + spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8)); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | + (ptr_opcode->rx_cnt << 4) | SPI_CTL_START; + + spiflash_regwrite32(SPI_FLASH_CTL, reg); + busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0); + + if (!ptr_opcode->rx_cnt) + return 0; + + reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); + + switch (ptr_opcode->rx_cnt) { + case 1: + mask = 0x000000ff; + break; + case 2: + mask = 0x0000ffff; + break; + case 3: + mask = 0x00ffffff; + break; + default: + mask = 0xffffffff; + break; + } + reg &= mask; + + return reg; +} + + + +/* Probe SPI flash device + * Function returns 0 for failure. + * and flashconfig_tbl array index for success. + */ +static int +spiflash_probe_chip (void) +{ + __u32 sig; + int flash_size; + + /* Read the signature on the flash device */ + spin_lock_bh(&spidata->mutex); + sig = spiflash_sendcmd(SPI_RD_SIG, 0); + spin_unlock_bh(&spidata->mutex); + + switch (sig) { + case STM_8MBIT_SIGNATURE: + flash_size = FLASH_1MB; + break; + case STM_16MBIT_SIGNATURE: + flash_size = FLASH_2MB; + break; + case STM_32MBIT_SIGNATURE: + flash_size = FLASH_4MB; + break; + case STM_64MBIT_SIGNATURE: + flash_size = FLASH_8MB; + break; + case STM_128MBIT_SIGNATURE: + flash_size = FLASH_16MB; + break; + default: + printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n"); + return (0); + } + + return (flash_size); +} + + +/* wait until the flash chip is ready and grab a lock */ +static int spiflash_wait_ready(int state) +{ + DECLARE_WAITQUEUE(wait, current); + +retry: + spin_lock_bh(&spidata->mutex); + if (spidata->state != FL_READY) { + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&spidata->wq, &wait); + spin_unlock_bh(&spidata->mutex); + schedule(); + remove_wait_queue(&spidata->wq, &wait); + + if(signal_pending(current)) + return 0; + + goto retry; + } + spidata->state = state; + + return 1; +} + +static inline void spiflash_done(void) +{ + spidata->state = FL_READY; + spin_unlock_bh(&spidata->mutex); + wake_up(&spidata->wq); +} + +static int +spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) +{ + struct opcodes *ptr_opcode; + u32 temp, reg; + + /* sanity checks */ + if (instr->addr + instr->len > mtd->size) return (-EINVAL); + + if (!spiflash_wait_ready(FL_ERASING)) + return -EINTR; + + spiflash_sendcmd(SPI_WRITE_ENABLE, 0); + busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0); + reg = spiflash_regread32(SPI_FLASH_CTL); + + ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE]; + temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code); + spiflash_regwrite32(SPI_FLASH_OPCODE, temp); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START; + spiflash_regwrite32(SPI_FLASH_CTL, reg); + + /* this will take some time */ + spin_unlock_bh(&spidata->mutex); + msleep(800); + spin_lock_bh(&spidata->mutex); + + busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20); + spiflash_done(); + + instr->state = MTD_ERASE_DONE; + if (instr->callback) instr->callback (instr); + + return 0; +} + +static int +spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) +{ + u8 *read_addr; + + /* sanity checks */ + if (!len) return (0); + if (from + len > mtd->size) return (-EINVAL); + + /* we always read len bytes */ + *retlen = len; + + if (!spiflash_wait_ready(FL_READING)) + return -EINTR; + read_addr = (u8 *)(spidata->readaddr + from); + memcpy(buf, read_addr, len); + spiflash_done(); + + return 0; +} + +static int +spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) +{ + u32 opcode, bytes_left; + + *retlen = 0; + + /* sanity checks */ + if (!len) return (0); + if (to + len > mtd->size) return (-EINVAL); + + opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; + bytes_left = len; + + do { + u32 xact_len, reg, page_offset, spi_data = 0; + + xact_len = MIN(bytes_left, sizeof(__u32)); + + /* 32-bit writes cannot span across a page boundary + * (256 bytes). This types of writes require two page + * program operations to handle it correctly. The STM part + * will write the overflow data to the beginning of the + * current page as opposed to the subsequent page. + */ + page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len; + + if (page_offset > STM_PAGE_SIZE) { + xact_len -= (page_offset - STM_PAGE_SIZE); + } + + if (!spiflash_wait_ready(FL_WRITING)) + return -EINTR; + + spiflash_sendcmd(SPI_WRITE_ENABLE, 0); + switch (xact_len) { + case 1: + spi_data = (u32) ((u8) *buf); + break; + case 2: + spi_data = (buf[1] << 8) | buf[0]; + break; + case 3: + spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + break; + case 4: + spi_data = (buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; + break; + default: + spi_data = 0; + break; + } + + spiflash_regwrite32(SPI_FLASH_DATA, spi_data); + opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8); + spiflash_regwrite32(SPI_FLASH_OPCODE, opcode); + + reg = spiflash_regread32(SPI_FLASH_CTL); + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START; + spiflash_regwrite32(SPI_FLASH_CTL, reg); + + /* give the chip some time before we start busy waiting */ + spin_unlock_bh(&spidata->mutex); + schedule(); + spin_lock_bh(&spidata->mutex); + + busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0); + spiflash_done(); + + bytes_left -= xact_len; + to += xact_len; + buf += xact_len; + + *retlen += xact_len; + } while (bytes_left != 0); + + return 0; +} + + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL }; +#endif + + +static int spiflash_probe(struct platform_device *pdev) +{ + int result = -1; + int index, num_parts; + struct mtd_info *mtd; + + spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); + spin_lock_init(&spidata->mutex); + init_waitqueue_head(&spidata->wq); + spidata->state = FL_READY; + + if (!spidata->mmraddr) { + printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); + kfree(spidata); + spidata = NULL; + } + + mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd) { + kfree(spidata); + return -ENXIO; + } + + if (!(index = spiflash_probe_chip())) { + printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); + goto error; + } + + spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); + if (!spidata->readaddr) { + printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); + goto error; + } + + mtd->name = "spiflash"; + mtd->type = MTD_NORFLASH; + mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); + mtd->size = flashconfig_tbl[index].byte_cnt; + mtd->erasesize = flashconfig_tbl[index].sector_size; + mtd->writesize = 1; + mtd->numeraseregions = 0; + mtd->eraseregions = NULL; + mtd->erase = spiflash_erase; + mtd->read = spiflash_read; + mtd->write = spiflash_write; + mtd->owner = THIS_MODULE; + + /* parse redboot partitions */ + num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0); + if (!num_parts) + goto error; + + result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts); + spidata->mtd = mtd; + + return (result); + +error: + kfree(mtd); + kfree(spidata); + return -ENXIO; +} + +static int spiflash_remove (struct platform_device *pdev) +{ + del_mtd_partitions (spidata->mtd); + kfree(spidata->mtd); + return 0; +} + +struct platform_driver spiflash_driver = { + .driver.name = "spiflash", + .probe = spiflash_probe, + .remove = spiflash_remove, +}; + +int __init +spiflash_init (void) +{ + spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); + if (!spidata) + return (-ENXIO); + + spin_lock_init(&spidata->mutex); + platform_driver_register(&spiflash_driver); + + return 0; +} + +void __exit +spiflash_exit (void) +{ + kfree(spidata); +} + +module_init (spiflash_init); +module_exit (spiflash_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc"); +MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); + diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h new file mode 100644 index 0000000000..2553c6f50f --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h @@ -0,0 +1,120 @@ +/* + * SPI Flash Memory support header file. + * + * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $ + * + * + * Copyright (c) 2005, Atheros Communications Inc. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#define FLASH_1MB 1 +#define FLASH_2MB 2 +#define FLASH_4MB 3 +#define FLASH_8MB 4 +#define FLASH_16MB 5 +#define MAX_FLASH 6 + +#define STM_PAGE_SIZE 256 + +#define SFI_WRITE_BUFFER_SIZE 4 +#define SFI_FLASH_ADDR_MASK 0x00ffffff + +#define STM_8MBIT_SIGNATURE 0x13 +#define STM_M25P80_BYTE_COUNT 1048576 +#define STM_M25P80_SECTOR_COUNT 16 +#define STM_M25P80_SECTOR_SIZE 0x10000 + +#define STM_16MBIT_SIGNATURE 0x14 +#define STM_M25P16_BYTE_COUNT 2097152 +#define STM_M25P16_SECTOR_COUNT 32 +#define STM_M25P16_SECTOR_SIZE 0x10000 + +#define STM_32MBIT_SIGNATURE 0x15 +#define STM_M25P32_BYTE_COUNT 4194304 +#define STM_M25P32_SECTOR_COUNT 64 +#define STM_M25P32_SECTOR_SIZE 0x10000 + +#define STM_64MBIT_SIGNATURE 0x16 +#define STM_M25P64_BYTE_COUNT 8388608 +#define STM_M25P64_SECTOR_COUNT 128 +#define STM_M25P64_SECTOR_SIZE 0x10000 + +#define STM_128MBIT_SIGNATURE 0x17 +#define STM_M25P128_BYTE_COUNT 16777216 +#define STM_M25P128_SECTOR_COUNT 256 +#define STM_M25P128_SECTOR_SIZE 0x10000 + +#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT +#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT +#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE +#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT +#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT +#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE +#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT +#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT +#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE +#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT +#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT +#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE +#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT +#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT +#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE + +/* + * ST Microelectronics Opcodes for Serial Flash + */ + +#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ +#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ +#define STM_OP_RD_STATUS 0x05 /* Read Status */ +#define STM_OP_WR_STATUS 0x01 /* Write Status */ +#define STM_OP_RD_DATA 0x03 /* Read Data */ +#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ +#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ +#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ +#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ +#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ +#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ + +#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ +#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ +#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ +#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ +#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ +#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ + +/* + * SPI Flash Interface Registers + */ +#define AR531XPLUS_SPI_READ 0x08000000 +#define AR531XPLUS_SPI_MMR 0x11300000 +#define AR531XPLUS_SPI_MMR_SIZE 12 + +#define AR531XPLUS_SPI_CTL 0x00 +#define AR531XPLUS_SPI_OPCODE 0x04 +#define AR531XPLUS_SPI_DATA 0x08 + +#define SPI_FLASH_READ AR531XPLUS_SPI_READ +#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR +#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE +#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL +#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE +#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA + +#define SPI_CTL_START 0x00000100 +#define SPI_CTL_BUSY 0x00010000 +#define SPI_CTL_TXCNT_MASK 0x0000000f +#define SPI_CTL_RXCNT_MASK 0x000000f0 +#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff +#define SPI_CTL_SIZE_MASK 0x00060000 + +#define SPI_CTL_CLK_SEL_MASK 0x03000000 +#define SPI_OPCODE_MASK 0x000000ff + +#define SPI_STATUS_WIP STM_STATUS_WIP diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile new file mode 100644 index 0000000000..9eb63e46b6 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the AR2313 ethernet driver +# + +obj-$(CONFIG_AR2313) += ar2313.o diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c new file mode 100644 index 0000000000..727d190b37 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c @@ -0,0 +1,1409 @@ +/* + * ar2313.c: Linux driver for the Atheros AR231x Ethernet device. + * + * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com> + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org> + * + * Thanks to Atheros for providing hardware and documentation + * enabling me to write this driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Additional credits: + * This code is taken from John Taylor's Sibyte driver and then + * modified for the AR2313. + */ + +#include <linux/autoconf.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/sockios.h> +#include <linux/pkt_sched.h> +#include <linux/compile.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/ethtool.h> +#include <linux/ctype.h> +#include <linux/platform_device.h> + +#include <net/sock.h> +#include <net/ip.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> +#include <asm/bootinfo.h> + +#define AR2313_MTU 1692 +#define AR2313_PRIOS 1 +#define AR2313_QUEUES (2*AR2313_PRIOS) +#define AR2313_DESCR_ENTRIES 64 + +#undef INDEX_DEBUG +#define DEBUG 0 +#define DEBUG_TX 0 +#define DEBUG_RX 0 +#define DEBUG_INT 0 +#define DEBUG_MC 0 +#define DEBUG_ERR 1 + +#ifndef min +#define min(a,b) (((a)<(b))?(a):(b)) +#endif + +#ifndef SMP_CACHE_BYTES +#define SMP_CACHE_BYTES L1_CACHE_BYTES +#endif + +#define AR2313_MBOX_SET_BIT 0x8 + +#define BOARD_IDX_STATIC 0 +#define BOARD_IDX_OVERFLOW -1 + +#include "dma.h" +#include "ar2313.h" + +/* + * New interrupt handler strategy: + * + * An old interrupt handler worked using the traditional method of + * replacing an skbuff with a new one when a packet arrives. However + * the rx rings do not need to contain a static number of buffer + * descriptors, thus it makes sense to move the memory allocation out + * of the main interrupt handler and do it in a bottom half handler + * and only allocate new buffers when the number of buffers in the + * ring is below a certain threshold. In order to avoid starving the + * NIC under heavy load it is however necessary to force allocation + * when hitting a minimum threshold. The strategy for alloction is as + * follows: + * + * RX_LOW_BUF_THRES - allocate buffers in the bottom half + * RX_PANIC_LOW_THRES - we are very low on buffers, allocate + * the buffers in the interrupt handler + * RX_RING_THRES - maximum number of buffers in the rx ring + * + * One advantagous side effect of this allocation approach is that the + * entire rx processing can be done without holding any spin lock + * since the rx rings and registers are totally independent of the tx + * ring and its registers. This of course includes the kmalloc's of + * new skb's. Thus start_xmit can run in parallel with rx processing + * and the memory allocation on SMP systems. + * + * Note that running the skb reallocation in a bottom half opens up + * another can of races which needs to be handled properly. In + * particular it can happen that the interrupt handler tries to run + * the reallocation while the bottom half is either running on another + * CPU or was interrupted on the same CPU. To get around this the + * driver uses bitops to prevent the reallocation routines from being + * reentered. + * + * TX handling can also be done without holding any spin lock, wheee + * this is fun! since tx_csm is only written to by the interrupt + * handler. + */ + +/* + * Threshold values for RX buffer allocation - the low water marks for + * when to start refilling the rings are set to 75% of the ring + * sizes. It seems to make sense to refill the rings entirely from the + * intrrupt handler once it gets below the panic threshold, that way + * we don't risk that the refilling is moved to another CPU when the + * one running the interrupt handler just got the slab code hot in its + * cache. + */ +#define RX_RING_SIZE AR2313_DESCR_ENTRIES +#define RX_PANIC_THRES (RX_RING_SIZE/4) +#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) +#define CRC_LEN 4 +#define RX_OFFSET 2 + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define VLAN_HDR 4 +#else +#define VLAN_HDR 0 +#endif + +#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET) + +#ifdef MODULE +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>"); +MODULE_DESCRIPTION("AR2313 Ethernet driver"); +#endif + +#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) + +// prototypes +#ifdef TX_TIMEOUT +static void ar2313_tx_timeout(struct net_device *dev); +#endif +static void ar2313_halt(struct net_device *dev); +static void rx_tasklet_func(unsigned long data); +static void rx_tasklet_cleanup(struct net_device *dev); +static void ar2313_multicast_list(struct net_device *dev); + +static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); +static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); +static int mdiobus_reset(struct mii_bus *bus); +static int mdiobus_probe (struct net_device *dev); +static void ar2313_adjust_link(struct net_device *dev); + +#ifndef ERR +#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) +#endif + + +int __init ar2313_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct ar2313_private *sp; + struct resource *res; + unsigned long ar_eth_base; + char buf[64]; + + dev = alloc_etherdev(sizeof(struct ar2313_private)); + + if (dev == NULL) { + printk(KERN_ERR + "ar2313: Unable to allocate net_device structure!\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, dev); + + sp = netdev_priv(dev); + sp->dev = dev; + sp->cfg = pdev->dev.platform_data; + + sprintf(buf, "eth%d_membase", pdev->id); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); + if (!res) + return -ENODEV; + + sp->link = 0; + ar_eth_base = res->start; + sp->phy = sp->cfg->phy; + + sprintf(buf, "eth%d_irq", pdev->id); + dev->irq = platform_get_irq_byname(pdev, buf); + + spin_lock_init(&sp->lock); + + /* initialize func pointers */ + dev->open = &ar2313_open; + dev->stop = &ar2313_close; + dev->hard_start_xmit = &ar2313_start_xmit; + + dev->set_multicast_list = &ar2313_multicast_list; +#ifdef TX_TIMEOUT + dev->tx_timeout = ar2313_tx_timeout; + dev->watchdog_timeo = AR2313_TX_TIMEOUT; +#endif + dev->do_ioctl = &ar2313_ioctl; + + // SAMEER: do we need this? + dev->features |= NETIF_F_HIGHDMA; + + tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev); + tasklet_disable(&sp->rx_tasklet); + + sp->eth_regs = + ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs)); + if (!sp->eth_regs) { + printk("Can't remap eth registers\n"); + return (-ENXIO); + } + + /* + * When there's only one MAC, PHY regs are typically on ENET0, + * even though the MAC might be on ENET1. + * Needto remap PHY regs separately in this case + */ + if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs)) + sp->phy_regs = sp->eth_regs; + else { + sp->phy_regs = + ioremap_nocache(virt_to_phys(sp->cfg->phy_base), + sizeof(*sp->phy_regs)); + if (!sp->phy_regs) { + printk("Can't remap phy registers\n"); + return (-ENXIO); + } + } + + sp->dma_regs = + ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000), + sizeof(*sp->dma_regs)); + dev->base_addr = (unsigned int) sp->dma_regs; + if (!sp->dma_regs) { + printk("Can't remap DMA registers\n"); + return (-ENXIO); + } + + sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4); + if (!sp->int_regs) { + printk("Can't remap INTERRUPT registers\n"); + return (-ENXIO); + } + + strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); + sp->name[sizeof(sp->name) - 1] = '\0'; + memcpy(dev->dev_addr, sp->cfg->macaddr, 6); + sp->board_idx = BOARD_IDX_STATIC; + + if (ar2313_init(dev)) { + /* + * ar2313_init() calls ar2313_init_cleanup() on error. + */ + kfree(dev); + return -ENODEV; + } + + if (register_netdev(dev)) { + printk("%s: register_netdev failed\n", __func__); + return -1; + } + + printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n", + dev->name, sp->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); + + sp->mii_bus.priv = dev; + sp->mii_bus.read = mdiobus_read; + sp->mii_bus.write = mdiobus_write; + sp->mii_bus.reset = mdiobus_reset; + sp->mii_bus.name = "ar2313_eth_mii"; + sp->mii_bus.id = 0; + sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); + *sp->mii_bus.irq = PHY_POLL; + + mdiobus_register(&sp->mii_bus); + + if (mdiobus_probe(dev) != 0) { + printk(KERN_ERR "ar2313: mdiobus_probe failed"); + rx_tasklet_cleanup(dev); + ar2313_init_cleanup(dev); + unregister_netdev(dev); + kfree(dev); + } else { + /* start link poll timer */ + ar2313_setup_timer(dev); + } + + return 0; +} + +#if 0 +static void ar2313_dump_regs(struct net_device *dev) +{ + unsigned int *ptr, i; + struct ar2313_private *sp = netdev_priv(dev); + + ptr = (unsigned int *) sp->eth_regs; + for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int)); + i++, ptr++) { + printk("ENET: %08x = %08x\n", (int) ptr, *ptr); + } + + ptr = (unsigned int *) sp->dma_regs; + for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) { + printk("DMA: %08x = %08x\n", (int) ptr, *ptr); + } + + ptr = (unsigned int *) sp->int_regs; + for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) { + printk("INT: %08x = %08x\n", (int) ptr, *ptr); + } + + for (i = 0; i < AR2313_DESCR_ENTRIES; i++) { + ar2313_descr_t *td = &sp->tx_ring[i]; + printk("Tx desc %2d: %08x %08x %08x %08x\n", i, + td->status, td->devcs, td->addr, td->descr); + } +} +#endif + +#ifdef TX_TIMEOUT +static void ar2313_tx_timeout(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + unsigned long flags; + +#if DEBUG_TX + printk("Tx timeout\n"); +#endif + spin_lock_irqsave(&sp->lock, flags); + ar2313_restart(dev); + spin_unlock_irqrestore(&sp->lock, flags); +} +#endif + +#if DEBUG_MC +static void printMcList(struct net_device *dev) +{ + struct dev_mc_list *list = dev->mc_list; + int num = 0, i; + while (list) { + printk("%d MC ADDR ", num); + for (i = 0; i < list->dmi_addrlen; i++) { + printk(":%02x", list->dmi_addr[i]); + } + list = list->next; + printk("\n"); + } +} +#endif + +/* + * Set or clear the multicast filter for this adaptor. + * THIS IS ABSOLUTE CRAP, disabled + */ +static void ar2313_multicast_list(struct net_device *dev) +{ + /* + * Always listen to broadcasts and + * treat IFF bits independently + */ + struct ar2313_private *sp = netdev_priv(dev); + unsigned int recognise; + + recognise = sp->eth_regs->mac_control; + + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + recognise |= MAC_CONTROL_PR; + } else { + recognise &= ~MAC_CONTROL_PR; + } + + if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) { +#if DEBUG_MC + printMcList(dev); + printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, + dev->mc_count); +#endif + recognise |= MAC_CONTROL_PM; /* all multicast */ + } else if (dev->mc_count > 0) { +#if DEBUG_MC + printMcList(dev); + printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count); +#endif + recognise |= MAC_CONTROL_PM; /* for the time being */ + } +#if DEBUG_MC + printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs, + recognise); +#endif + + sp->eth_regs->mac_control = recognise; +} + +static void rx_tasklet_cleanup(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + + /* + * Tasklet may be scheduled. Need to get it removed from the list + * since we're about to free the struct. + */ + + sp->unloading = 1; + tasklet_enable(&sp->rx_tasklet); + tasklet_kill(&sp->rx_tasklet); +} + +static int __exit ar2313_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + rx_tasklet_cleanup(dev); + ar2313_init_cleanup(dev); + unregister_netdev(dev); + kfree(dev); + return 0; +} + + +/* + * Restart the AR2313 ethernet controller. + */ +static int ar2313_restart(struct net_device *dev) +{ + /* disable interrupts */ + disable_irq(dev->irq); + + /* stop mac */ + ar2313_halt(dev); + + /* initialize */ + ar2313_init(dev); + + /* enable interrupts */ + enable_irq(dev->irq); + + return 0; +} + +static struct platform_driver ar2313_driver = { + .driver.name = "ar531x-eth", + .probe = ar2313_probe, + .remove = ar2313_remove, +}; + +int __init ar2313_module_init(void) +{ + return platform_driver_register(&ar2313_driver); +} + +void __exit ar2313_module_cleanup(void) +{ + platform_driver_unregister(&ar2313_driver); +} + +module_init(ar2313_module_init); +module_exit(ar2313_module_cleanup); + + +static void ar2313_free_descriptors(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + if (sp->rx_ring != NULL) { + kfree((void *) KSEG0ADDR(sp->rx_ring)); + sp->rx_ring = NULL; + sp->tx_ring = NULL; + } +} + + +static int ar2313_allocate_descriptors(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + int size; + int j; + ar2313_descr_t *space; + + if (sp->rx_ring != NULL) { + printk("%s: already done.\n", __FUNCTION__); + return 0; + } + + size = + (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES)); + space = kmalloc(size, GFP_KERNEL); + if (space == NULL) + return 1; + + /* invalidate caches */ + dma_cache_inv((unsigned int) space, size); + + /* now convert pointer to KSEG1 */ + space = (ar2313_descr_t *) KSEG1ADDR(space); + + memset((void *) space, 0, size); + + sp->rx_ring = space; + space += AR2313_DESCR_ENTRIES; + + sp->tx_ring = space; + space += AR2313_DESCR_ENTRIES; + + /* Initialize the transmit Descriptors */ + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + ar2313_descr_t *td = &sp->tx_ring[j]; + td->status = 0; + td->devcs = DMA_TX1_CHAINED; + td->addr = 0; + td->descr = + virt_to_phys(&sp-> + tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]); + } + + return 0; +} + + +/* + * Generic cleanup handling data allocated during init. Used when the + * module is unloaded or if an error occurs during initialization + */ +static void ar2313_init_cleanup(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + struct sk_buff *skb; + int j; + + ar2313_free_descriptors(dev); + + if (sp->eth_regs) + iounmap((void *) sp->eth_regs); + if (sp->dma_regs) + iounmap((void *) sp->dma_regs); + + if (sp->rx_skb) { + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + skb = sp->rx_skb[j]; + if (skb) { + sp->rx_skb[j] = NULL; + dev_kfree_skb(skb); + } + } + kfree(sp->rx_skb); + sp->rx_skb = NULL; + } + + if (sp->tx_skb) { + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + skb = sp->tx_skb[j]; + if (skb) { + sp->tx_skb[j] = NULL; + dev_kfree_skb(skb); + } + } + kfree(sp->tx_skb); + sp->tx_skb = NULL; + } +} + +static int ar2313_setup_timer(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + + init_timer(&sp->link_timer); + + sp->link_timer.function = ar2313_link_timer_fn; + sp->link_timer.data = (int) dev; + sp->link_timer.expires = jiffies + HZ; + + add_timer(&sp->link_timer); + return 0; + +} + +static void ar2313_link_timer_fn(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct ar2313_private *sp = netdev_priv(dev); + + // see if the link status changed + // This was needed to make sure we set the PHY to the + // autonegotiated value of half or full duplex. + ar2313_check_link(dev); + + // Loop faster when we don't have link. + // This was needed to speed up the AP bootstrap time. + if (sp->link == 0) { + mod_timer(&sp->link_timer, jiffies + HZ / 2); + } else { + mod_timer(&sp->link_timer, jiffies + LINK_TIMER); + } +} + +static void ar2313_check_link(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + u16 phyData; + + phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR); + if (sp->phyData != phyData) { + if (phyData & BMSR_LSTATUS) { + /* link is present, ready link partner ability to deterine + duplexity */ + int duplex = 0; + u16 reg; + + sp->link = 1; + reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR); + if (reg & BMCR_ANENABLE) { + /* auto neg enabled */ + reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA); + duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; + } else { + /* no auto neg, just read duplex config */ + duplex = (reg & BMCR_FULLDPLX) ? 1 : 0; + } + + printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", + dev->name, (duplex) ? "full" : "half"); + + if (duplex) { + /* full duplex */ + sp->eth_regs->mac_control = + ((sp->eth_regs-> + mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO); + } else { + /* half duplex */ + sp->eth_regs->mac_control = + ((sp->eth_regs-> + mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F); + } + } else { + /* no link */ + sp->link = 0; + } + sp->phyData = phyData; + } +} + +static int ar2313_reset_reg(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + unsigned int ethsal, ethsah; + unsigned int flags; + + *sp->int_regs |= sp->cfg->reset_mac; + mdelay(10); + *sp->int_regs &= ~sp->cfg->reset_mac; + mdelay(10); + *sp->int_regs |= sp->cfg->reset_phy; + mdelay(10); + *sp->int_regs &= ~sp->cfg->reset_phy; + mdelay(10); + + sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); + mdelay(10); + sp->dma_regs->bus_mode = + ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); + + /* enable interrupts */ + sp->dma_regs->intr_ena = (DMA_STATUS_AIS | + DMA_STATUS_NIS | + DMA_STATUS_RI | + DMA_STATUS_TI | DMA_STATUS_FBE); + sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); + sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); + sp->dma_regs->control = + (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); + + sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); + sp->eth_regs->vlan_tag = (0x8100); + + /* Enable Ethernet Interface */ + flags = (MAC_CONTROL_TE | /* transmit enable */ + MAC_CONTROL_PM | /* pass mcast */ + MAC_CONTROL_F | /* full duplex */ + MAC_CONTROL_HBD); /* heart beat disabled */ + + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + flags |= MAC_CONTROL_PR; + } + sp->eth_regs->mac_control = flags; + + /* Set all Ethernet station address registers to their initial values */ + ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); + + ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | + (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | + (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); + + sp->eth_regs->mac_addr[0] = ethsah; + sp->eth_regs->mac_addr[1] = ethsal; + + mdelay(10); + + return (0); +} + + +static int ar2313_init(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + int ecode = 0; + + /* + * Allocate descriptors + */ + if (ar2313_allocate_descriptors(dev)) { + printk("%s: %s: ar2313_allocate_descriptors failed\n", + dev->name, __FUNCTION__); + ecode = -EAGAIN; + goto init_error; + } + + /* + * Get the memory for the skb rings. + */ + if (sp->rx_skb == NULL) { + sp->rx_skb = + kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, + GFP_KERNEL); + if (!(sp->rx_skb)) { + printk("%s: %s: rx_skb kmalloc failed\n", + dev->name, __FUNCTION__); + ecode = -EAGAIN; + goto init_error; + } + } + memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); + + if (sp->tx_skb == NULL) { + sp->tx_skb = + kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, + GFP_KERNEL); + if (!(sp->tx_skb)) { + printk("%s: %s: tx_skb kmalloc failed\n", + dev->name, __FUNCTION__); + ecode = -EAGAIN; + goto init_error; + } + } + memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); + + /* + * Set tx_csm before we start receiving interrupts, otherwise + * the interrupt handler might think it is supposed to process + * tx ints before we are up and running, which may cause a null + * pointer access in the int handler. + */ + sp->rx_skbprd = 0; + sp->cur_rx = 0; + sp->tx_prd = 0; + sp->tx_csm = 0; + + /* + * Zero the stats before starting the interface + */ + memset(&dev->stats, 0, sizeof(dev->stats)); + + /* + * We load the ring here as there seem to be no way to tell the + * firmware to wipe the ring without re-initializing it. + */ + ar2313_load_rx_ring(dev, RX_RING_SIZE); + + /* + * Init hardware + */ + ar2313_reset_reg(dev); + + /* + * Get the IRQ + */ + ecode = + request_irq(dev->irq, &ar2313_interrupt, + IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + dev->name, dev); + if (ecode) { + printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", + dev->name, __FUNCTION__, dev->irq); + goto init_error; + } + + + tasklet_enable(&sp->rx_tasklet); + + return 0; + + init_error: + ar2313_init_cleanup(dev); + return ecode; +} + +/* + * Load the rx ring. + * + * Loading rings is safe without holding the spin lock since this is + * done only before the device is enabled, thus no interrupts are + * generated and by the interrupt handler/tasklet handler. + */ +static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) +{ + + struct ar2313_private *sp = netdev_priv(dev); + short i, idx; + + idx = sp->rx_skbprd; + + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + ar2313_descr_t *rd; + + if (sp->rx_skb[idx]) { +#if DEBUG_RX + printk(KERN_INFO "ar2313 rx refill full\n"); +#endif /* DEBUG */ + break; + } + // partha: create additional room for the second GRE fragment + skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC); + if (!skb) { + printk("\n\n\n\n %s: No memory in system\n\n\n\n", + __FUNCTION__); + break; + } + // partha: create additional room in the front for tx pkt capture + skb_reserve(skb, 32); + + /* + * Make sure IP header starts on a fresh cache line. + */ + skb->dev = dev; + skb_reserve(skb, RX_OFFSET); + sp->rx_skb[idx] = skb; + + rd = (ar2313_descr_t *) & sp->rx_ring[idx]; + + /* initialize dma descriptor */ + rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | + DMA_RX1_CHAINED); + rd->addr = virt_to_phys(skb->data); + rd->descr = + virt_to_phys(&sp-> + rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]); + rd->status = DMA_RX_OWN; + + idx = DSC_NEXT(idx); + } + + if (!i) { +#if DEBUG_ERR + printk(KERN_INFO + "Out of memory when allocating standard receive buffers\n"); +#endif /* DEBUG */ + } else { + sp->rx_skbprd = idx; + } + + return; +} + +#define AR2313_MAX_PKTS_PER_CALL 64 + +static int ar2313_rx_int(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + struct sk_buff *skb, *skb_new; + ar2313_descr_t *rxdesc; + unsigned int status; + u32 idx; + int pkts = 0; + int rval; + + idx = sp->cur_rx; + + /* process at most the entire ring and then wait for another interrupt + */ + while (1) { + + rxdesc = &sp->rx_ring[idx]; + status = rxdesc->status; + if (status & DMA_RX_OWN) { + /* SiByte owns descriptor or descr not yet filled in */ + rval = 0; + break; + } + + if (++pkts > AR2313_MAX_PKTS_PER_CALL) { + rval = 1; + break; + } +#if DEBUG_RX + printk("index %d\n", idx); + printk("RX status %08x\n", rxdesc->status); + printk("RX devcs %08x\n", rxdesc->devcs); + printk("RX addr %08x\n", rxdesc->addr); + printk("RX descr %08x\n", rxdesc->descr); +#endif + + if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) && + (!(status & DMA_RX_LONG))) { +#if DEBUG_RX + printk("%s: rx ERROR %08x\n", __FUNCTION__, status); +#endif + dev->stats.rx_errors++; + dev->stats.rx_dropped++; + + /* add statistics counters */ + if (status & DMA_RX_ERR_CRC) + dev->stats.rx_crc_errors++; + if (status & DMA_RX_ERR_COL) + dev->stats.rx_over_errors++; + if (status & DMA_RX_ERR_LENGTH) + dev->stats.rx_length_errors++; + if (status & DMA_RX_ERR_RUNT) + dev->stats.rx_over_errors++; + if (status & DMA_RX_ERR_DESC) + dev->stats.rx_over_errors++; + + } else { + /* alloc new buffer. */ + skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); + if (skb_new != NULL) { + + skb = sp->rx_skb[idx]; + /* set skb */ + skb_put(skb, + ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); + + dev->stats.rx_bytes += skb->len; + skb->protocol = eth_type_trans(skb, dev); + /* pass the packet to upper layers */ + netif_rx(skb); + + skb_new->dev = dev; + /* 16 bit align */ + skb_reserve(skb_new, RX_OFFSET + 32); + /* reset descriptor's curr_addr */ + rxdesc->addr = virt_to_phys(skb_new->data); + + dev->stats.rx_packets++; + sp->rx_skb[idx] = skb_new; + } else { + dev->stats.rx_dropped++; + } + } + + rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | + DMA_RX1_CHAINED); + rxdesc->status = DMA_RX_OWN; + + idx = DSC_NEXT(idx); + } + + sp->cur_rx = idx; + + return rval; +} + + +static void ar2313_tx_int(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + u32 idx; + struct sk_buff *skb; + ar2313_descr_t *txdesc; + unsigned int status = 0; + + idx = sp->tx_csm; + + while (idx != sp->tx_prd) { + + txdesc = &sp->tx_ring[idx]; + +#if DEBUG_TX + printk + ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n", + dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status, + txdesc->devcs, txdesc->addr, txdesc->descr); +#endif /* DEBUG */ + + if ((status = txdesc->status) & DMA_TX_OWN) { + /* ar2313 dma still owns descr */ + break; + } + /* done with this descriptor */ + dma_unmap_single(NULL, txdesc->addr, + txdesc->devcs & DMA_TX1_BSIZE_MASK, + DMA_TO_DEVICE); + txdesc->status = 0; + + if (status & DMA_TX_ERROR) { + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + if (status & DMA_TX_ERR_UNDER) + dev->stats.tx_fifo_errors++; + if (status & DMA_TX_ERR_HB) + dev->stats.tx_heartbeat_errors++; + if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) + dev->stats.tx_carrier_errors++; + if (status & (DMA_TX_ERR_LATE | + DMA_TX_ERR_COL | + DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) + dev->stats.tx_aborted_errors++; + } else { + /* transmit OK */ + dev->stats.tx_packets++; + } + + skb = sp->tx_skb[idx]; + sp->tx_skb[idx] = NULL; + idx = DSC_NEXT(idx); + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + } + + sp->tx_csm = idx; + + return; +} + + +static void rx_tasklet_func(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct ar2313_private *sp = netdev_priv(dev); + + if (sp->unloading) { + return; + } + + if (ar2313_rx_int(dev)) { + tasklet_hi_schedule(&sp->rx_tasklet); + } else { + unsigned long flags; + spin_lock_irqsave(&sp->lock, flags); + sp->dma_regs->intr_ena |= DMA_STATUS_RI; + spin_unlock_irqrestore(&sp->lock, flags); + } +} + +static void rx_schedule(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + + sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; + + tasklet_hi_schedule(&sp->rx_tasklet); +} + +static irqreturn_t ar2313_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct ar2313_private *sp = netdev_priv(dev); + unsigned int status, enabled; + + /* clear interrupt */ + /* + * Don't clear RI bit if currently disabled. + */ + status = sp->dma_regs->status; + enabled = sp->dma_regs->intr_ena; + sp->dma_regs->status = status & enabled; + + if (status & DMA_STATUS_NIS) { + /* normal status */ + /* + * Don't schedule rx processing if interrupt + * is already disabled. + */ + if (status & enabled & DMA_STATUS_RI) { + /* receive interrupt */ + rx_schedule(dev); + } + if (status & DMA_STATUS_TI) { + /* transmit interrupt */ + ar2313_tx_int(dev); + } + } + + if (status & DMA_STATUS_AIS) { +#if DEBUG_INT + printk("%s: AIS set %08x & %x\n", __FUNCTION__, + status, (DMA_STATUS_FBE | DMA_STATUS_TPS)); +#endif + /* abnormal status */ + if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) { + ar2313_restart(dev); + } + } + return IRQ_HANDLED; +} + + +static int ar2313_open(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + unsigned int ethsal, ethsah; + + /* reset the hardware, in case the MAC address changed */ + ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); + + ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | + (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | + (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | + (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); + + sp->eth_regs->mac_addr[0] = ethsah; + sp->eth_regs->mac_addr[1] = ethsal; + + mdelay(10); + + dev->mtu = 1500; + netif_start_queue(dev); + + sp->eth_regs->mac_control |= MAC_CONTROL_RE; + + return 0; +} + +static void ar2313_halt(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + int j; + + tasklet_disable(&sp->rx_tasklet); + + /* kill the MAC */ + sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ + MAC_CONTROL_TE); /* disable Transmits */ + /* stop dma */ + sp->dma_regs->control = 0; + sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; + + /* place phy and MAC in reset */ + *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy); + + /* free buffers on tx ring */ + for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { + struct sk_buff *skb; + ar2313_descr_t *txdesc; + + txdesc = &sp->tx_ring[j]; + txdesc->descr = 0; + + skb = sp->tx_skb[j]; + if (skb) { + dev_kfree_skb(skb); + sp->tx_skb[j] = NULL; + } + } +} + +/* + * close should do nothing. Here's why. It's called when + * 'ifconfig bond0 down' is run. If it calls free_irq then + * the irq is gone forever ! When bond0 is made 'up' again, + * the ar2313_open () does not call request_irq (). Worse, + * the call to ar2313_halt() generates a WDOG reset due to + * the write to 'sp->int_regs' and the box reboots. + * Commenting this out is good since it allows the + * system to resume when bond0 is made up again. + */ +static int ar2313_close(struct net_device *dev) +{ +#if 0 + /* + * Disable interrupts + */ + disable_irq(dev->irq); + + /* + * Without (or before) releasing irq and stopping hardware, this + * is an absolute non-sense, by the way. It will be reset instantly + * by the first irq. + */ + netif_stop_queue(dev); + + /* stop the MAC and DMA engines */ + ar2313_halt(dev); + + /* release the interrupt */ + free_irq(dev->irq, dev); + +#endif + return 0; +} + +static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + ar2313_descr_t *td; + u32 idx; + + idx = sp->tx_prd; + td = &sp->tx_ring[idx]; + + if (td->status & DMA_TX_OWN) { +#if DEBUG_TX + printk("%s: No space left to Tx\n", __FUNCTION__); +#endif + /* free skbuf and lie to the caller that we sent it out */ + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + + /* restart transmitter in case locked */ + sp->dma_regs->xmt_poll = 0; + return 0; + } + + /* Setup the transmit descriptor. */ + td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | + (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); + td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); + td->status = DMA_TX_OWN; + + /* kick transmitter last */ + sp->dma_regs->xmt_poll = 0; + +#if DEBUG_TX + printk("index %d\n", idx); + printk("TX status %08x\n", td->status); + printk("TX devcs %08x\n", td->devcs); + printk("TX addr %08x\n", td->addr); + printk("TX descr %08x\n", td->descr); +#endif + + sp->tx_skb[idx] = skb; + idx = DSC_NEXT(idx); + sp->tx_prd = idx; + + return 0; +} + +static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; + struct ar2313_private *sp = netdev_priv(dev); + int ret; + + switch (cmd) { + + case SIOCETHTOOL: + spin_lock_irq(&sp->lock); + ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data); + spin_unlock_irq(&sp->lock); + return ret; + + case SIOCSIFHWADDR: + if (copy_from_user + (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) + return -EFAULT; + return 0; + + case SIOCGIFHWADDR: + if (copy_to_user + (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) + return -EFAULT; + return 0; + + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return phy_mii_ioctl(sp->phy_dev, data, cmd); + + default: + break; + } + + return -EOPNOTSUPP; +} + +static void ar2313_adjust_link(struct net_device *dev) +{ + struct ar2313_private *sp = netdev_priv(dev); + unsigned int mc; + + if (!sp->phy_dev->link) + return; + + if (sp->phy_dev->duplex != sp->oldduplex) { + mc = readl(&sp->eth_regs->mac_control); + mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); + if (sp->phy_dev->duplex) + mc |= MAC_CONTROL_F; + else + mc |= MAC_CONTROL_DRO; + writel(mc, &sp->eth_regs->mac_control); + sp->oldduplex = sp->phy_dev->duplex; + } +} + +#define MII_ADDR(phy, reg) \ + ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) + +static int +mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) +{ + struct net_device *const dev = bus->priv; + struct ar2313_private *sp = netdev_priv(dev); + volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; + + ethernet->mii_addr = MII_ADDR(phy_addr, regnum); + while (ethernet->mii_addr & MII_ADDR_BUSY); + return (ethernet->mii_data >> MII_DATA_SHIFT); +} + +static int +mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, + u16 value) +{ + struct net_device *const dev = bus->priv; + struct ar2313_private *sp = netdev_priv(dev); + volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; + + while (ethernet->mii_addr & MII_ADDR_BUSY); + ethernet->mii_data = value << MII_DATA_SHIFT; + ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; + + return 0; +} + +static int mdiobus_reset(struct mii_bus *bus) +{ + struct net_device *const dev = bus->priv; + + ar2313_reset_reg(dev); + + return 0; +} + +static int mdiobus_probe (struct net_device *dev) +{ + struct ar2313_private *const sp = netdev_priv(dev); + struct phy_device *phydev = NULL; + int phy_addr; + + /* find the first (lowest address) PHY on the current MAC's MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (sp->mii_bus.phy_map[phy_addr]) { + phydev = sp->mii_bus.phy_map[phy_addr]; + break; /* break out with first one found */ + } + + if (!phydev) { + printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name); + return -1; + } + + /* now we are supposed to have a proper phydev, to attach to... */ + BUG_ON(!phydev); + BUG_ON(phydev->attached_dev); + + phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); + } + + /* mask with MAC supported features */ + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg + /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ + | SUPPORTED_MII + | SUPPORTED_TP); + + phydev->advertising = phydev->supported; + + sp->oldduplex = -1; + sp->phy_dev = phydev; + + printk(KERN_INFO "%s: attached PHY driver [%s] " + "(mii_bus:phy_addr=%s)\n", + dev->name, phydev->drv->name, phydev->dev.bus_id); + + return 0; +} + diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h new file mode 100644 index 0000000000..9fa49caa79 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h @@ -0,0 +1,195 @@ +#ifndef _AR2313_H_ +#define _AR2313_H_ + +#include <linux/autoconf.h> +#include <asm/bootinfo.h> +#include <ar531x_platform.h> + +/* + * probe link timer - 5 secs + */ +#define LINK_TIMER (5*HZ) + +#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) +#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) +#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) + +#define AR2313_TX_TIMEOUT (HZ/4) + +/* + * Rings + */ +#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) +#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) + +static inline int tx_space(u32 csm, u32 prd) +{ + return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1); +} + +#if MAX_SKB_FRAGS +#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */ +#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED) +#else +#define tx_ring_full 0 +#endif + +#define AR2313_MBGET 2 +#define AR2313_MBSET 3 +#define AR2313_PCI_RECONFIG 4 +#define AR2313_PCI_DUMP 5 +#define AR2313_TEST_PANIC 6 +#define AR2313_TEST_NULLPTR 7 +#define AR2313_READ_DATA 8 +#define AR2313_WRITE_DATA 9 +#define AR2313_GET_VERSION 10 +#define AR2313_TEST_HANG 11 +#define AR2313_SYNC 12 + + +// +// New Combo structure for Both Eth0 AND eth1 +// +typedef struct { + volatile unsigned int mac_control; /* 0x00 */ + volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ + volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ + volatile unsigned int mii_addr; /* 0x14 */ + volatile unsigned int mii_data; /* 0x18 */ + volatile unsigned int flow_control; /* 0x1c */ + volatile unsigned int vlan_tag; /* 0x20 */ + volatile unsigned int pad[7]; /* 0x24 - 0x3c */ + volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ + +} ETHERNET_STRUCT; + +/******************************************************************** + * Interrupt controller + ********************************************************************/ + +typedef struct { + volatile unsigned int wdog_control; /* 0x08 */ + volatile unsigned int wdog_timer; /* 0x0c */ + volatile unsigned int misc_status; /* 0x10 */ + volatile unsigned int misc_mask; /* 0x14 */ + volatile unsigned int global_status; /* 0x18 */ + volatile unsigned int reserved; /* 0x1c */ + volatile unsigned int reset_control; /* 0x20 */ +} INTERRUPT; + +/******************************************************************** + * DMA controller + ********************************************************************/ +typedef struct { + volatile unsigned int bus_mode; /* 0x00 (CSR0) */ + volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ + volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ + volatile unsigned int rcv_base; /* 0x0c (CSR3) */ + volatile unsigned int xmt_base; /* 0x10 (CSR4) */ + volatile unsigned int status; /* 0x14 (CSR5) */ + volatile unsigned int control; /* 0x18 (CSR6) */ + volatile unsigned int intr_ena; /* 0x1c (CSR7) */ + volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ + volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ + volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ + volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ +} DMA; + +/* + * Struct private for the Sibyte. + * + * Elements are grouped so variables used by the tx handling goes + * together, and will go into the same cache lines etc. in order to + * avoid cache line contention between the rx and tx handling on SMP. + * + * Frequently accessed variables are put at the beginning of the + * struct to help the compiler generate better/shorter code. + */ +struct ar2313_private { + struct net_device *dev; + int version; + u32 mb[2]; + + volatile ETHERNET_STRUCT *phy_regs; + volatile ETHERNET_STRUCT *eth_regs; + volatile DMA *dma_regs; + volatile u32 *int_regs; + struct ar531x_eth *cfg; + + spinlock_t lock; /* Serialise access to device */ + + /* + * RX and TX descriptors, must be adjacent + */ + ar2313_descr_t *rx_ring; + ar2313_descr_t *tx_ring; + + + struct sk_buff **rx_skb; + struct sk_buff **tx_skb; + + /* + * RX elements + */ + u32 rx_skbprd; + u32 cur_rx; + + /* + * TX elements + */ + u32 tx_prd; + u32 tx_csm; + + /* + * Misc elements + */ + int board_idx; + char name[48]; + struct { + u32 address; + u32 length; + char *mapping; + } desc; + + + struct timer_list link_timer; + unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ + unsigned short mac; + unsigned short link; /* 0 - link down, 1 - link up */ + u16 phyData; + + struct tasklet_struct rx_tasklet; + int unloading; + + struct phy_device *phy_dev; + struct mii_bus mii_bus; + int oldduplex; +}; + + +/* + * Prototypes + */ +static int ar2313_init(struct net_device *dev); +#ifdef TX_TIMEOUT +static void ar2313_tx_timeout(struct net_device *dev); +#endif +#if 0 +static void ar2313_multicast_list(struct net_device *dev); +#endif +static int ar2313_restart(struct net_device *dev); +#if DEBUG +static void ar2313_dump_regs(struct net_device *dev); +#endif +static void ar2313_load_rx_ring(struct net_device *dev, int bufs); +static irqreturn_t ar2313_interrupt(int irq, void *dev_id); +static int ar2313_open(struct net_device *dev); +static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int ar2313_close(struct net_device *dev); +static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, + int cmd); +static void ar2313_init_cleanup(struct net_device *dev); +static int ar2313_setup_timer(struct net_device *dev); +static void ar2313_link_timer_fn(unsigned long data); +static void ar2313_check_link(struct net_device *dev); +#endif /* _AR2313_H_ */ diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h new file mode 100644 index 0000000000..6d478d21fe --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h @@ -0,0 +1,142 @@ +#ifndef __ARUBA_DMA_H__ +#define __ARUBA_DMA_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Update : + * $Log: dma.h,v $ + * Revision 1.3 2002/06/06 18:34:03 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.2 2002/06/05 18:30:46 astichte + * Removed IDTField + * + * Revision 1.1 2002/05/29 17:33:21 sysarch + * jba File moved from vcode/include/idt/acacia + * + * + ******************************************************************************/ + +#define AR_BIT(x) (1 << (x)) +#define DMA_RX_ERR_CRC AR_BIT(1) +#define DMA_RX_ERR_DRIB AR_BIT(2) +#define DMA_RX_ERR_MII AR_BIT(3) +#define DMA_RX_EV2 AR_BIT(5) +#define DMA_RX_ERR_COL AR_BIT(6) +#define DMA_RX_LONG AR_BIT(7) +#define DMA_RX_LS AR_BIT(8) /* last descriptor */ +#define DMA_RX_FS AR_BIT(9) /* first descriptor */ +#define DMA_RX_MF AR_BIT(10) /* multicast frame */ +#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */ +#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */ +#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */ +#define DMA_RX_ERROR AR_BIT(15) /* error summary */ +#define DMA_RX_LEN_MASK 0x3fff0000 +#define DMA_RX_LEN_SHIFT 16 +#define DMA_RX_FILT AR_BIT(30) +#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */ + +#define DMA_RX1_BSIZE_MASK 0x000007ff +#define DMA_RX1_BSIZE_SHIFT 0 +#define DMA_RX1_CHAINED AR_BIT(24) +#define DMA_RX1_RER AR_BIT(25) + +#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */ +#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */ +#define DMA_TX_COL_MASK 0x78 +#define DMA_TX_COL_SHIFT 3 +#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */ +#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */ +#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */ +#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */ +#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */ +#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */ +#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */ +#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */ + +#define DMA_TX1_BSIZE_MASK 0x000007ff +#define DMA_TX1_BSIZE_SHIFT 0 +#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */ +#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */ +#define DMA_TX1_FS AR_BIT(29) /* first segment */ +#define DMA_TX1_LS AR_BIT(30) /* last segment */ +#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */ + +#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ + +#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */ +#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */ +#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */ +#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */ +#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */ +#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */ +#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */ +#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */ +#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */ +#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */ +#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */ +#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */ +#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames + only) */ +#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */ +#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */ +#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */ +#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE + SET) */ +#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */ +#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid + frames) */ + +#define MII_ADDR_BUSY AR_BIT(0) +#define MII_ADDR_WRITE AR_BIT(1) +#define MII_ADDR_REG_SHIFT 6 +#define MII_ADDR_PHY_SHIFT 11 +#define MII_DATA_SHIFT 0 + +#define FLOW_CONTROL_FCE AR_BIT(1) + +#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */ +#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */ +#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ +#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */ + +#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */ +#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */ +#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */ +#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */ +#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */ +#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */ +#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */ +#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */ +#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */ +#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */ +#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */ +#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */ +#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */ +#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ +#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ +#define DMA_STATUS_EB_SHIFT 23 /* error bits */ + +#define DMA_CONTROL_SR AR_BIT(1) /* start receive */ +#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */ +#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */ + + +typedef struct { + volatile unsigned int status; // OWN, Device control and status. + volatile unsigned int devcs; // pkt Control bits + Length + volatile unsigned int addr; // Current Address. + volatile unsigned int descr; // Next descriptor in chain. +} ar2313_descr_t; + + +#endif // __ARUBA_DMA_H__ diff --git a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c b/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c new file mode 100644 index 0000000000..d71b6f6848 --- /dev/null +++ b/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c @@ -0,0 +1,198 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (C) 2008 John Crispin <blogic@openwrt.org> + * Based on EP93xx and ifxmips wdt driver + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/addrspace.h> +#include <ar531x.h> + +#define CLOCK_RATE 40000000 +#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x) + +static int wdt_timeout = 20; +static int started = 0; +static int in_use = 0; + +static void +ar2315_wdt_enable(void) +{ + sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE); + sysRegWrite(AR5315_ISR, 0x80); +} + +static ssize_t +ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +{ + if(len) + ar2315_wdt_enable(); + return len; +} + +static int +ar2315_wdt_open(struct inode *inode, struct file *file) +{ + if(in_use) + return -EBUSY; + ar2315_wdt_enable(); + in_use = started = 1; + return nonseekable_open(inode, file); +} + +static int +ar2315_wdt_release(struct inode *inode, struct file *file) +{ + in_use = 0; + return 0; +} + +static irqreturn_t +ar2315_wdt_interrupt(int irq, void *dev_id) +{ + if(started) + { + printk(KERN_CRIT "watchdog expired, rebooting system\n"); + emergency_restart(); + } else { + sysRegWrite(AR5315_WDC, 0); + sysRegWrite(AR5315_WD, 0); + sysRegWrite(AR5315_ISR, 0x80); + } + return IRQ_HANDLED; +} + +static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "ar2315 Watchdog", +}; + +static int +ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + int new_wdt_timeout; + int ret = -ENOIOCTLCMD; + + switch(cmd) + { + case WDIOC_GETSUPPORT: + ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_KEEPALIVE: + ar2315_wdt_enable(); + ret = 0; + break; + + case WDIOC_SETTIMEOUT: + if((ret = get_user(new_wdt_timeout, (int __user *)arg))) + break; + wdt_timeout = HEARTBEAT(new_wdt_timeout); + ar2315_wdt_enable(); + break; + + case WDIOC_GETTIMEOUT: + ret = put_user(wdt_timeout, (int __user *)arg); + break; + } + return ret; +} + +static struct file_operations ar2315_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ar2315_wdt_write, + .ioctl = ar2315_wdt_ioctl, + .open = ar2315_wdt_open, + .release = ar2315_wdt_release, +}; + +static struct miscdevice ar2315_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ar2315_wdt_fops, +}; + +static int +ar2315_wdt_probe(struct platform_device *dev) +{ + int ret = 0; + + ar2315_wdt_enable(); + ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL); + if(ret) + { + printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n"); + goto out; + } + + ret = misc_register(&ar2315_wdt_miscdev); + if(ret) + printk(KERN_ERR "ar2315wdt: failed to register miscdev\n"); + +out: + return ret; +} + +static int +ar2315_wdt_remove(struct platform_device *dev) +{ + misc_deregister(&ar2315_wdt_miscdev); + free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL); + return 0; +} + +static struct platform_driver ar2315_wdt_driver = { + .probe = ar2315_wdt_probe, + .remove = ar2315_wdt_remove, + .driver = { + .name = "ar2315_wdt", + .owner = THIS_MODULE, + }, +}; + +static int __init +init_ar2315_wdt(void) +{ + int ret = platform_driver_register(&ar2315_wdt_driver); + if(ret) + printk(KERN_INFO "ar2315_wdt: error registering platfom driver!"); + return ret; +} + +static void __exit +exit_ar2315_wdt(void) +{ + platform_driver_unregister(&ar2315_wdt_driver); +} + +module_init(init_ar2315_wdt); +module_exit(exit_ar2315_wdt); diff --git a/target/linux/atheros/patches-2.6.28/100-board.patch b/target/linux/atheros/patches-2.6.28/100-board.patch new file mode 100644 index 0000000000..c7f374559f --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/100-board.patch @@ -0,0 +1,66 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -60,6 +60,18 @@ config BCM47XX + help + Support for BCM47XX based boards + ++config ATHEROS ++ bool "Atheros SoC support (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select GENERIC_GPIO ++ + config MIPS_COBALT + bool "Cobalt Server" + select CEVT_R4K +@@ -597,6 +609,7 @@ config WR_PPMC + + endchoice + ++source "arch/mips/atheros/Kconfig" + source "arch/mips/alchemy/Kconfig" + source "arch/mips/basler/excite/Kconfig" + source "arch/mips/emma/Kconfig" +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -278,6 +278,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips + load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 + + # ++# Atheros AR5312/AR2312 WiSoC ++# ++core-$(CONFIG_ATHEROS) += arch/mips/atheros/ ++cflags-$(CONFIG_ATHEROS) += -I$(srctree)/arch/mips/include/asm/mach-atheros ++load-$(CONFIG_ATHEROS) += 0xffffffff80041000 ++ ++# + # Cobalt Server + # + core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ +--- a/arch/mips/include/asm/bootinfo.h ++++ b/arch/mips/include/asm/bootinfo.h +@@ -57,6 +57,18 @@ + #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ + #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ + ++/* ++ * Valid machtype for group ATHEROS ++ */ ++#define MACH_GROUP_ATHEROS 26 ++#define MACH_ATHEROS_AR5312 0 ++#define MACH_ATHEROS_AR2312 1 ++#define MACH_ATHEROS_AR2313 2 ++#define MACH_ATHEROS_AR2315 3 ++#define MACH_ATHEROS_AR2316 4 ++#define MACH_ATHEROS_AR2317 5 ++#define MACH_ATHEROS_AR2318 6 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + extern char *system_type; diff --git a/target/linux/atheros/patches-2.6.28/110-spiflash.patch b/target/linux/atheros/patches-2.6.28/110-spiflash.patch new file mode 100644 index 0000000000..4b9b9d6891 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/110-spiflash.patch @@ -0,0 +1,20 @@ +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ + help + This option enables FAST_READ access supported by ST M25Pxx. + ++config MTD_SPIFLASH ++ tristate "Atheros AR2315/6/7 SPI Flash support" ++ depends on ATHEROS_AR5315 ++ + config MTD_SLRAM + tristate "Uncached system RAM" + help +--- a/drivers/mtd/devices/Makefile ++++ b/drivers/mtd/devices/Makefile +@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o + obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o ++obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o diff --git a/target/linux/atheros/patches-2.6.28/120-watchdog.patch b/target/linux/atheros/patches-2.6.28/120-watchdog.patch new file mode 100644 index 0000000000..88c42a2a83 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/120-watchdog.patch @@ -0,0 +1,25 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -747,6 +747,12 @@ config TXX9_WDT + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config ATHEROS_WDT ++ tristate "Atheros wisoc Watchdog Timer" ++ depends on ATHEROS ++ help ++ Hardware driver for the Atheros wisoc Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o + + # PARISC Architecture + diff --git a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch new file mode 100644 index 0000000000..5c183a431f --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch @@ -0,0 +1,25 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -359,6 +359,12 @@ config AX88796_93CX6 + help + Select this if your platform comes with an external 93CX6 eeprom. + ++config AR2313 ++ tristate "AR2313 Ethernet support" ++ depends on NET_ETHERNET && ATHEROS ++ help ++ Support for the AR231x/531x ethernet controller ++ + config MACE + tristate "MACE (Power Mac ethernet) support" + depends on PPC_PMAC && PPC32 +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o + obj-$(CONFIG_KORINA) += korina.o + obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o + obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o ++obj-$(CONFIG_AR2313) += ar2313/ + obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o + obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o + obj-$(CONFIG_DECLANCE) += declance.o diff --git a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch b/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch new file mode 100644 index 0000000000..a39b46c0b8 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/ar2313/ar2313.c ++++ b/drivers/net/ar2313/ar2313.c +@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_ + sp->mii_bus.write = mdiobus_write; + sp->mii_bus.reset = mdiobus_reset; + sp->mii_bus.name = "ar2313_eth_mii"; +- sp->mii_bus.id = 0; ++ snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0"); + sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); + *sp->mii_bus.irq = PHY_POLL; + diff --git a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch b/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch new file mode 100644 index 0000000000..0f4d732630 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch @@ -0,0 +1,144 @@ +This patch reflects changes in mdiobus implementation in kernel 2.6.28. +--- a/drivers/net/ar2313/ar2313.c ++++ b/drivers/net/ar2313/ar2313.c +@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon + static void rx_tasklet_cleanup(struct net_device *dev); + static void ar2313_multicast_list(struct net_device *dev); + +-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); +-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); +-static int mdiobus_reset(struct mii_bus *bus); +-static int mdiobus_probe (struct net_device *dev); ++static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); ++static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); ++static int ar2313_mdiobus_reset(struct mii_bus *bus); ++static int ar2313_mdiobus_probe (struct net_device *dev); + static void ar2313_adjust_link(struct net_device *dev); + + #ifndef ERR +@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_ + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); + +- sp->mii_bus.priv = dev; +- sp->mii_bus.read = mdiobus_read; +- sp->mii_bus.write = mdiobus_write; +- sp->mii_bus.reset = mdiobus_reset; +- sp->mii_bus.name = "ar2313_eth_mii"; +- snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0"); +- sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); +- *sp->mii_bus.irq = PHY_POLL; ++ sp->mii_bus = mdiobus_alloc(); ++ if (sp->mii_bus == NULL) ++ return -1; ++ ++ sp->mii_bus->priv = dev; ++ sp->mii_bus->read = ar2313_mdiobus_read; ++ sp->mii_bus->write = ar2313_mdiobus_write; ++ sp->mii_bus->reset = ar2313_mdiobus_reset; ++ sp->mii_bus->name = "ar2313_eth_mii"; ++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0"); ++ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL); ++ *sp->mii_bus->irq = PHY_POLL; + +- mdiobus_register(&sp->mii_bus); ++ mdiobus_register(sp->mii_bus); + +- if (mdiobus_probe(dev) != 0) { ++ if (ar2313_mdiobus_probe(dev) != 0) { + printk(KERN_ERR "ar2313: mdiobus_probe failed"); + rx_tasklet_cleanup(dev); + ar2313_init_cleanup(dev); +@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne + static int __exit ar2313_remove(struct platform_device *pdev) + { + struct net_device *dev = platform_get_drvdata(pdev); ++ struct ar2313_private *sp = netdev_priv(dev); + rx_tasklet_cleanup(dev); + ar2313_init_cleanup(dev); + unregister_netdev(dev); ++ mdiobus_unregister(sp->mii_bus); ++ mdiobus_free(sp->mii_bus); + kfree(dev); + return 0; + } +@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net + struct ar2313_private *sp = netdev_priv(dev); + u16 phyData; + +- phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR); ++ phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); + if (sp->phyData != phyData) { + if (phyData & BMSR_LSTATUS) { + /* link is present, ready link partner ability to deterine +@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net + u16 reg; + + sp->link = 1; +- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR); ++ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR); + if (reg & BMCR_ANENABLE) { + /* auto neg enabled */ +- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA); ++ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA); + duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; + } else { + /* no auto neg, just read duplex config */ +@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne + ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) + + static int +-mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) ++ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) + { + struct net_device *const dev = bus->priv; + struct ar2313_private *sp = netdev_priv(dev); +@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph + } + + static int +-mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, ++ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, + u16 value) + { + struct net_device *const dev = bus->priv; +@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p + return 0; + } + +-static int mdiobus_reset(struct mii_bus *bus) ++static int ar2313_mdiobus_reset(struct mii_bus *bus) + { + struct net_device *const dev = bus->priv; + +@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus + return 0; + } + +-static int mdiobus_probe (struct net_device *dev) ++static int ar2313_mdiobus_probe (struct net_device *dev) + { + struct ar2313_private *const sp = netdev_priv(dev); + struct phy_device *phydev = NULL; +@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev + + /* find the first (lowest address) PHY on the current MAC's MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) +- if (sp->mii_bus.phy_map[phy_addr]) { +- phydev = sp->mii_bus.phy_map[phy_addr]; ++ if (sp->mii_bus->phy_map[phy_addr]) { ++ phydev = sp->mii_bus->phy_map[phy_addr]; + break; /* break out with first one found */ + } + +--- a/drivers/net/ar2313/ar2313.h ++++ b/drivers/net/ar2313/ar2313.h +@@ -162,7 +162,7 @@ struct ar2313_private { + int unloading; + + struct phy_device *phy_dev; +- struct mii_bus mii_bus; ++ struct mii_bus *mii_bus; + int oldduplex; + }; + diff --git a/target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch new file mode 100644 index 0000000000..289d4eb990 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch @@ -0,0 +1,54 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; + } + } else { + offset = directory * master->erasesize; +- while (master->block_isbad && ++ while (master->block_isbad && + master->block_isbad(master, offset)) { + offset += master->erasesize; + if (offset == master->size) + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; +- + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); + +@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block :) */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch new file mode 100644 index 0000000000..710314d7f7 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch @@ -0,0 +1,70 @@ +--- a/drivers/net/ar2313/ar2313.c ++++ b/drivers/net/ar2313/ar2313.c +@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n + for (i = 0; i < nr_bufs; i++) { + struct sk_buff *skb; + ar2313_descr_t *rd; ++ int offset = RX_OFFSET; + + if (sp->rx_skb[idx]) { + #if DEBUG_RX +@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n + * Make sure IP header starts on a fresh cache line. + */ + skb->dev = dev; +- skb_reserve(skb, RX_OFFSET); ++ if (sp->phy_dev) ++ offset += sp->phy_dev->pkt_align; ++ skb_reserve(skb, offset); + sp->rx_skb[idx] = skb; + + rd = (ar2313_descr_t *) & sp->rx_ring[idx]; +@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi + /* alloc new buffer. */ + skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); + if (skb_new != NULL) { ++ int offset; + + skb = sp->rx_skb[idx]; + /* set skb */ +@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi + ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); + + dev->stats.rx_bytes += skb->len; +- skb->protocol = eth_type_trans(skb, dev); ++ + /* pass the packet to upper layers */ +- netif_rx(skb); ++ sp->rx(skb); + + skb_new->dev = dev; ++ + /* 16 bit align */ +- skb_reserve(skb_new, RX_OFFSET + 32); ++ offset = RX_OFFSET + 32; ++ if (sp->phy_dev) ++ offset += sp->phy_dev->pkt_align; ++ skb_reserve(skb_new, offset); + /* reset descriptor's curr_addr */ + rxdesc->addr = virt_to_phys(skb_new->data); + +@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct + return PTR_ERR(phydev); + } + ++ sp->rx = phydev->netif_rx; ++ + /* mask with MAC supported features */ + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full +--- a/drivers/net/ar2313/ar2313.h ++++ b/drivers/net/ar2313/ar2313.h +@@ -107,6 +107,8 @@ typedef struct { + */ + struct ar2313_private { + struct net_device *dev; ++ int (*rx)(struct sk_buff *skb); ++ + int version; + u32 mb[2]; + diff --git a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch b/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch new file mode 100644 index 0000000000..9b4331cfdc --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch @@ -0,0 +1,43 @@ +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -47,6 +47,7 @@ + #include <asm/mmu_context.h> + #include <asm/types.h> + #include <asm/stacktrace.h> ++#include <asm/time.h> + + extern void check_wait(void); + extern asmlinkage void r4k_wait(void); +@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void) + */ + if (cpu_has_mips_r2) { + cp0_compare_irq = (read_c0_intctl() >> 29) & 7; ++ if (get_c0_compare_irq) ++ cp0_compare_irq = get_c0_compare_irq(); + cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; + if (cp0_perfcount_irq == cp0_compare_irq) + cp0_perfcount_irq = -1; +--- a/arch/mips/include/asm/time.h ++++ b/arch/mips/include/asm/time.h +@@ -53,6 +53,7 @@ extern int (*perf_irq)(void); + #ifdef CONFIG_CEVT_R4K + extern int mips_clockevent_init(void); + extern unsigned int __weak get_c0_compare_int(void); ++extern unsigned int __weak get_c0_compare_irq(void); + #else + static inline int mips_clockevent_init(void) + { +--- a/arch/mips/atheros/board.c ++++ b/arch/mips/atheros/board.c +@@ -265,6 +265,11 @@ void (*board_time_init)(void); + void __init plat_time_init(void) { + board_time_init(); + } ++ ++unsigned int __cpuinit get_c0_compare_irq(void) ++{ ++ return CP0_LEGACY_COMPARE_IRQ; ++} + #endif + + void __init arch_init_irq(void) diff --git a/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch b/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch new file mode 100644 index 0000000000..03a66ff133 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch @@ -0,0 +1,56 @@ +--- a/arch/mips/kernel/cevt-r4k.c ++++ b/arch/mips/kernel/cevt-r4k.c +@@ -15,6 +15,22 @@ + #include <asm/cevt-r4k.h> + + /* ++ * Compare interrupt can be routed and latched outside the core, ++ * so a single execution hazard barrier may not be enough to give ++ * it time to clear as seen in the Cause register. 4 time the ++ * pipeline depth seems reasonably conservative, and empirically ++ * works better in configurations with high CPU/bus clock ratios. ++ */ ++ ++#define compare_change_hazard() \ ++ do { \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ } while (0) ++ ++/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ +@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long + cnt = read_c0_count(); + cnt += delta; + write_c0_compare(cnt); ++ compare_change_hazard(); + res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; + return res; + } +@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void) + return (read_c0_cause() >> cp0_compare_irq) & 0x100; + } + +-/* +- * Compare interrupt can be routed and latched outside the core, +- * so a single execution hazard barrier may not be enough to give +- * it time to clear as seen in the Cause register. 4 time the +- * pipeline depth seems reasonably conservative, and empirically +- * works better in configurations with high CPU/bus clock ratios. +- */ +- +-#define compare_change_hazard() \ +- do { \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- irq_disable_hazard(); \ +- } while (0) +- + int c0_compare_int_usable(void) + { + unsigned int delta; |