lantiq: fix VG3503J ethernet/gphy led support

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37634 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 18 insertions, 46 deletions

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
index 0878de833a..e525ebdff2 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
@@ -21,10 +21,6 @@ board=$(lantiq_board_id)
 
 case "$board" in
 VG3503J)
-	ucidef_set_led_netdev "lan1" "lan1" "bt:green:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "lan2" "bt:green:lan2" "eth1"
-	ucidef_set_led_netdev "port1" "port1" "bt:green:port1" "eth0"
-	ucidef_set_led_netdev "port2" "port2" "bt:green:port2" "eth1"
 	ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
 	;;
 *)
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 9ae7c70cc6..1d3a1177b0 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -70,7 +70,8 @@ WBMR)
 	;;
 
 VG3503J)
-	ucidef_set_interface_lan 'eth0 eth1'
+	ucidef_set_interface_lan 'eth0'
+	uci set network.lan.type='none'
 	;;
 DGN3500*)
 	ucidef_set_interface_lan "eth0.1"
diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
index 037563b7fa..8278a177dd 100644
--- a/target/linux/lantiq/dts/VG3503J.dts
+++ b/target/linux/lantiq/dts/VG3503J.dts
@@ -74,6 +74,15 @@
 					lantiq,groups = "mdio";
 					lantiq,function = "mdio";
 				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led0", "gphy0 led1",
+							"gphy0 led2", "gphy1 led0",
+							"gphy1 led1", "gphy1 led2";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
 			};
 		};
 
@@ -89,34 +98,24 @@
 			interrupt-parent = <&icu0>;
 			interrupts = <73 72>;
 
-			lan1: interface@0 {
+			interface@0 {
 				compatible = "lantiq,xrx200-pdi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				mac-address = [ 00 11 22 33 44 55 ];
-				lantiq,wan;
-				ethernet@4 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <4>;
-					phy-mode = "mii";
-					phy-handle = <&phy13>;
-				};
-			};
-
-			lan2: interface@1 {
-				compatible = "lantiq,xrx200-pdi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>;
-				mac-address = [ 00 11 22 33 44 56 ];
-
 				ethernet@2 {
 					compatible = "lantiq,xrx200-pdi-port";
 					reg = <2>;
 					phy-mode = "mii";
 					phy-handle = <&phy11>;
 				};
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "mii";
+					phy-handle = <&phy13>;
+				};
 			};
 
 			mdio@0 {
@@ -156,18 +155,6 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		port2orange {
-			label = "bt:orange:port2";
-			gpios = <&gpio 2 0>;
-		};
-		lan2 {
-			label = "bt:green:lan2";
-			gpios = <&gpio 5 0>;
-		};
-		port2green {
-			label = "bt:green:port2";
-			gpios = <&gpio 7 0>;
-		};
 		power2 {
 			label = "power2";
 			gpios = <&gpio 14 1>;
@@ -180,17 +167,5 @@
 			label = "power";
 			gpios = <&gpio 28 1>;
 		};
-		lan1 {
-			label = "bt:green:lan1";
-			gpios = <&gpio 44 0>;
-		};
-		port1green {
-			label = "bt:green:port1";
-			gpios = <&gpio 45 0>;
-		};
-		port1orange {
-			label = "bt:orange:port1";
-			gpios = <&gpio 47 0>;
-		};
 	};
 };