rename the xscale target to ixp4xx for the forthcoming iop target, add gcc 4.1 patch for arm

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5310 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 163 deletions

diff --git a/target/linux/xscale-2.6/patches/001-gateway_7001.patch b/target/linux/xscale-2.6/patches/001-gateway_7001.patch
deleted file mode 100644
index d144758b24..0000000000
--- a/target/linux/xscale-2.6/patches/001-gateway_7001.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-diff -Nur linux-2.6.17/arch/arm/boot/compressed/head-xscale.S linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.17/arch/arm/boot/compressed/head-xscale.S	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S	2006-08-05 17:02:21.000000000 +0200
-@@ -47,6 +47,11 @@
-                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
- 
-+#ifdef  CONFIG_MACH_GATEWAY7001
-+               mov     r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+               orr     r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
- 		mov	r1, #-1
- 		mov	r0, #0xd6000000
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c	2006-08-05 17:02:21.000000000 +0200
-@@ -1,9 +1,10 @@
- /*
-  * arch/arm/mach-ixp4xx/coyote-setup.c
-  *
-- * Board setup for ADI Engineering and IXDGP425 boards
-+ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
-  *
-  * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
-  *
-  * Author: Deepak Saxena <dsaxena@plexity.net>
-  */
-@@ -111,6 +112,19 @@
- MACHINE_END
- #endif
- 
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001")
-+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+	.map_io		= ixp4xx_map_io,
-+	.init_irq	= ixp4xx_init_irq,
-+	.timer		= &ixp4xx_timer,
-+	.boot_params	= 0x0100,
-+	.init_machine	= coyote_init,
-+MACHINE_END
-+#endif
-+
- /*
-  * IXDPG425 is identical to Coyote except for which serial port
-  * is connected.
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c	2006-08-06 10:37:35.000000000 +0200
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ *	Copyright (C) 2002 Jungo Software Technologies.
-+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+	ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	if (slot == 0)
-+		return IRQ_IXP4XX_GPIO10;
-+	else if (slot == 1)
-+		return IRQ_IXP4XX_GPIO11;
-+	else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+	.nr_controllers = 1,
-+	.preinit =        gateway7001_pci_preinit,
-+	.swizzle =        pci_std_swizzle,
-+	.setup =          ixp4xx_setup,
-+	.scan =           ixp4xx_scan_bus,
-+	.map_irq =        gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+	if (machine_is_gateway7001())
-+		pci_common_init(&gateway7001_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig	2006-08-05 17:04:13.000000000 +0200
-@@ -33,6 +33,14 @@
- 	  Engineering Coyote Gateway Reference Platform. For more
- 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
- 
-+config MACH_GATEWAY7001
-+	bool "Gateway 7001"
-+	select PCI
-+	help
-+	  Say 'Y' here if you want your kernel to support Gateway's 
-+	  7001 Access Point. For more information on this platform,
-+	  see http://openwrt.org
-+
- config ARCH_IXDP425
- 	bool "IXDP425"
- 	select PCI
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Makefile linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.17/arch/arm/mach-ixp4xx/Makefile	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile	2006-08-05 17:02:21.000000000 +0200
-@@ -11,4 +11,5 @@
- obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D)	+= nas100d-pci.o nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o coyote-setup.o
- 
-diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2006-08-05 17:03:32.000000000 +0200
-@@ -38,9 +38,9 @@
- static __inline__ void __arch_decomp_setup(unsigned long arch_id)
- {
- 	/*
--	 * Coyote and gtwx5715 only have UART2 connected
-+	 * Some targets only have UART2 connected
- 	 */
--	if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+	if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
- 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- 	else
- 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;