xburst: remove support for old kernels

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 298 deletions

diff --git a/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch b/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch
deleted file mode 100644
index 48ec0ca741..0000000000
--- a/target/linux/xburst/patches-3.2/0012-MIPS-JZ4740-Add-cpufreq-support.patch
+++ /dev/null
@@ -1,298 +0,0 @@
-From d0f0d5739a31c12d349980ed05a670fa1e84696d Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 16 Mar 2011 03:16:04 +0100
-Subject: [PATCH 12/21] MIPS: JZ4740: Add cpufreq support.
-
-This is a squashed version of Uli's driver that was further developed in the opendingux-kernel repository.
----
- arch/mips/Kconfig                |    1 +
- arch/mips/jz4740/Makefile        |    1 +
- arch/mips/jz4740/cpufreq.c       |  226 ++++++++++++++++++++++++++++++++++++++
- arch/mips/kernel/cpufreq/Kconfig |   13 ++-
- 4 files changed, 240 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/jz4740/cpufreq.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -209,6 +209,7 @@ config MACH_JZ4740
- 	select HAVE_PWM
- 	select HAVE_CLK
- 	select GENERIC_IRQ_CHIP
-+	select CPU_SUPPORTS_CPUFREQ
- 
- config LANTIQ
- 	bool "Lantiq based platforms"
---- a/arch/mips/jz4740/Makefile
-+++ b/arch/mips/jz4740/Makefile
-@@ -16,5 +16,6 @@ obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi
- # PM support
- 
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_CPU_FREQ_JZ) += cpufreq.o
- 
- ccflags-y := -Werror -Wall
---- /dev/null
-+++ b/arch/mips/jz4740/cpufreq.c
-@@ -0,0 +1,226 @@
-+/*
-+ * linux/arch/mips/jz4740/cpufreq.c
-+ *
-+ * cpufreq driver for JZ4740
-+ *
-+ * Copyright (c) 2010       Ulrich Hecht <ulrich.hecht@gmail.com>
-+ * Copyright (c) 2010       Maarten ter Huurne <maarten@treewalker.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+
-+#include <linux/cpufreq.h>
-+
-+#include <linux/clk.h>
-+#include <asm/mach-jz4740/base.h>
-+
-+#include "clock.h"
-+
-+#define DEBUG_CPUFREQ
-+
-+#ifdef DEBUG_CPUFREQ
-+#define dprintk(X...) printk(KERN_INFO X)
-+#else
-+#define dprintk(X...) do { } while(0)
-+#endif
-+
-+#define HCLK_MIN 30000
-+/* TODO: The maximum MCLK most likely depends on the SDRAM chips used,
-+         so it is board-specific. */
-+#define MCLK_MAX 140000
-+
-+/* Same as jz_clk_main_divs, but with 24 and 32 removed because the hardware
-+   spec states those dividers must not be used for CCLK or HCLK. */
-+static const unsigned int jz4740_freq_cpu_divs[] = {1, 2, 3, 4, 6, 8, 12, 16};
-+
-+struct jz4740_freq_percpu_info {
-+	unsigned int pll_rate;
-+	struct cpufreq_frequency_table table[
-+		ARRAY_SIZE(jz4740_freq_cpu_divs) + 1];
-+};
-+
-+static struct clk *pll;
-+static struct clk *cclk;
-+
-+static struct jz4740_freq_percpu_info jz4740_freq_info;
-+
-+static struct cpufreq_driver cpufreq_jz4740_driver;
-+
-+static void jz4740_freq_fill_table(struct cpufreq_policy *policy,
-+				   unsigned int pll_rate)
-+{
-+	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
-+	int i;
-+
-+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-+	/* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
-+	static bool init = false;
-+	if (init)
-+		cpufreq_frequency_table_put_attr(policy->cpu);
-+	else
-+		init = true;
-+#endif
-+
-+	jz4740_freq_info.pll_rate = pll_rate;
-+
-+	for (i = 0; i < ARRAY_SIZE(jz4740_freq_cpu_divs); i++) {
-+		unsigned int freq = pll_rate / jz4740_freq_cpu_divs[i];
-+		if (freq < HCLK_MIN) break;
-+		table[i].index = i;
-+		table[i].frequency = freq;
-+	}
-+	table[i].index = i;
-+	table[i].frequency = CPUFREQ_TABLE_END;
-+
-+	policy->min = table[i - 1].frequency;
-+	policy->max = table[0].frequency;
-+
-+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-+	cpufreq_frequency_table_get_attr(table, policy->cpu);
-+#endif
-+}
-+
-+static unsigned int jz4740_freq_get(unsigned int cpu)
-+{
-+	return clk_get_rate(cclk) / 1000;
-+}
-+
-+static int jz4740_freq_verify(struct cpufreq_policy *policy)
-+{
-+	unsigned int new_pll;
-+
-+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-+				     policy->cpuinfo.max_freq);
-+
-+	new_pll = clk_round_rate(pll, policy->max * 1000) / 1000;
-+	if (jz4740_freq_info.pll_rate != new_pll)
-+		jz4740_freq_fill_table(policy, new_pll);
-+
-+	return 0;
-+}
-+
-+static int jz4740_freq_target(struct cpufreq_policy *policy,
-+			  unsigned int target_freq,
-+			  unsigned int relation)
-+{
-+	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
-+	struct cpufreq_freqs freqs;
-+	unsigned int new_index = 0;
-+	unsigned int old_pll = clk_get_rate(pll) / 1000;
-+	unsigned int new_pll = jz4740_freq_info.pll_rate;
-+	int ret = 0;
-+
-+	if (cpufreq_frequency_table_target(policy, table,
-+					   target_freq, relation, &new_index))
-+		return -EINVAL;
-+	freqs = (struct cpufreq_freqs) {
-+		.old = jz4740_freq_get(policy->cpu),
-+		.new = table[new_index].frequency,
-+		.cpu = policy->cpu,
-+		.flags = cpufreq_jz4740_driver.flags,
-+	};
-+	if (freqs.new != freqs.old || new_pll != old_pll) {
-+		unsigned int cdiv, hdiv, mdiv, pdiv;
-+		cdiv = jz4740_freq_cpu_divs[new_index];
-+		hdiv = (cdiv == 3 || cdiv == 6) ? cdiv * 2 : cdiv * 3;
-+		while (new_pll < HCLK_MIN * hdiv)
-+			hdiv -= cdiv;
-+		mdiv = hdiv;
-+		if (new_pll > MCLK_MAX * mdiv) {
-+			/* 4,4 performs better than 3,6 */
-+			if (new_pll > MCLK_MAX * 4)
-+				mdiv *= 2;
-+			else
-+				hdiv = mdiv = cdiv * 4;
-+		}
-+		pdiv = mdiv;
-+		dprintk(KERN_INFO "%s: cclk %p, setting from %d to %d, "
-+			"dividers %d, %d, %d, %d\n",
-+			__FUNCTION__, cclk, freqs.old, freqs.new,
-+			cdiv, hdiv, mdiv, pdiv);
-+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+		ret = clk_main_set_dividers(new_pll == old_pll,
-+					    cdiv, hdiv, mdiv, pdiv);
-+		if (ret) {
-+			dprintk(KERN_INFO "failed to set dividers\n");
-+		} else if (new_pll != old_pll) {
-+			dprintk(KERN_INFO "%s: pll %p, setting from %d to %d\n",
-+				__FUNCTION__, pll, old_pll, new_pll);
-+			ret = clk_set_rate(pll, new_pll * 1000);
-+		}
-+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+	}
-+
-+	return ret;
-+}
-+
-+static int jz4740_cpufreq_driver_init(struct cpufreq_policy *policy)
-+{
-+	int ret;
-+
-+	dprintk(KERN_INFO "Jz4740 cpufreq driver\n");
-+
-+	if (policy->cpu != 0)
-+		return -EINVAL;
-+
-+	pll = clk_get(NULL, "pll");
-+	if (IS_ERR(pll)) {
-+		ret = PTR_ERR(pll);
-+		goto err_exit;
-+	}
-+
-+	cclk = clk_get(NULL, "cclk");
-+	if (IS_ERR(cclk)) {
-+		ret = PTR_ERR(cclk);
-+		goto err_clk_put_pll;
-+	}
-+
-+	policy->cpuinfo.min_freq = HCLK_MIN;
-+	policy->cpuinfo.max_freq = 500000;
-+	policy->cpuinfo.transition_latency = 100000; /* in nanoseconds */
-+	policy->cur = jz4740_freq_get(policy->cpu);
-+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+	/* min and max are set by jz4740_freq_fill_table() */
-+
-+	jz4740_freq_fill_table(policy, clk_get_rate(pll) / 1000 /* in kHz */);
-+
-+	return 0;
-+
-+err_clk_put_pll:
-+	clk_put(pll);
-+err_exit:
-+	return ret;
-+}
-+
-+static struct cpufreq_driver cpufreq_jz4740_driver = {
-+	.init	= jz4740_cpufreq_driver_init,
-+	.verify	= jz4740_freq_verify,
-+	.target	= jz4740_freq_target,
-+	.get	= jz4740_freq_get,
-+	.name	= "jz4740",
-+};
-+
-+static int __init jz4740_cpufreq_init(void)
-+{
-+	return cpufreq_register_driver(&cpufreq_jz4740_driver);
-+}
-+
-+static void __exit jz4740_cpufreq_exit(void)
-+{
-+	cpufreq_unregister_driver(&cpufreq_jz4740_driver);
-+}
-+
-+module_init(jz4740_cpufreq_init);
-+module_exit(jz4740_cpufreq_exit);
-+
-+MODULE_AUTHOR("Ulrich Hecht <ulrich.hecht@gmail.com>, "
-+	      "Maarten ter Huurne <maarten@treewalker.org>");
-+MODULE_DESCRIPTION("cpufreq driver for Jz4740");
-+MODULE_LICENSE("GPL");
---- a/arch/mips/kernel/cpufreq/Kconfig
-+++ b/arch/mips/kernel/cpufreq/Kconfig
-@@ -8,7 +8,7 @@ config MIPS_EXTERNAL_TIMER
- config MIPS_CPUFREQ
- 	bool
- 	default y
--	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
-+	depends on CPU_SUPPORTS_CPUFREQ
- 
- if MIPS_CPUFREQ
- 
-@@ -24,6 +24,7 @@ config LOONGSON2_CPUFREQ
- 	tristate "Loongson2 CPUFreq Driver"
- 	select CPU_FREQ_TABLE
- 	depends on MIPS_CPUFREQ
-+	depends on MIPS_EXTERNAL_TIMER
- 	help
- 	  This option adds a CPUFreq driver for loongson processors which
- 	  support software configurable cpu frequency.
-@@ -34,6 +35,16 @@ config LOONGSON2_CPUFREQ
- 
- 	  If in doubt, say N.
- 
-+config CPU_FREQ_JZ
-+	tristate "CPUfreq driver for JZ CPUs"
-+	select CPU_FREQ_TABLE
-+	depends on MACH_JZ4740
-+	default n
-+	help
-+	  This enables the CPUfreq driver for JZ CPUs.
-+
-+	  If in doubt, say N.
-+
- endif	# CPU_FREQ
- 
- endmenu