kernel: add 3.7 support for x86

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34754 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 1450 insertions, 0 deletions

diff --git a/target/linux/x86/config-3.7 b/target/linux/x86/config-3.7
new file mode 100644
index 0000000000..68ab9fb962
--- /dev/null
+++ b/target/linux/x86/config-3.7
@@ -0,0 +1,389 @@
+# CONFIG_60XX_WDT is not set
+# CONFIG_64BIT is not set
+# CONFIG_ACPI is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIX is not set
+CONFIG_AMD_NB=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_ARCH_RANDOM is not set
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ATA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_ATA_PIIX=y
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BOUNCE=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_CLKEVT_I8253=y
+CONFIG_CLKSRC_I8253=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CPU5_WDT is not set
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CRC16=y
+# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DELL_RBU is not set
+# CONFIG_DMI is not set
+CONFIG_DNOTIFY=y
+CONFIG_DOUBLEFAULT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+# CONFIG_EDD is not set
+CONFIG_ELF_CORE=y
+# CONFIG_EUROTECH_WDT is not set
+CONFIG_EXT4_FS=y
+# CONFIG_F71808E_WDT is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_PCI_IOMAP=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+# CONFIG_GOOGLE_FIRMWARE is not set
+# CONFIG_GPIO_ICH is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_HPET_TIMER=y
+# CONFIG_HP_WATCHDOG is not set
+CONFIG_HT_IRQ=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_GEODE=y
+CONFIG_HW_RANDOM_VIA=y
+# CONFIG_I6300ESB_WDT is not set
+CONFIG_I8253_LOCK=y
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_RTL is not set
+# CONFIG_IE6XX_WDT is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INSTRUCTION_DECODER=y
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+# CONFIG_IO_DELAY_UDELAY is not set
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+CONFIG_IRQ_WORK=y
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
+# CONFIG_ITCO_WDT is not set
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACHZ_WDT is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MATOM is not set
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MELAN is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_TS5500 is not set
+CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+CONFIG_NAMESPACES=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET5501 is not set
+# CONFIG_NET_NS is not set
+CONFIG_NOHIGHMEM=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=1
+# CONFIG_NSC_GPIO is not set
+CONFIG_NVRAM=y
+# CONFIG_OLPC is not set
+CONFIG_OPROFILE_NMI_TIMER=y
+# CONFIG_OPTIMIZE_INLINING is not set
+CONFIG_OUTPUT_FORMAT="elf32-i386"
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_PC87413_WDT is not set
+CONFIG_PCI=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_MSI=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_PDA_POWER is not set
+CONFIG_PERF_EVENTS=y
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PROCESSOR_SELECT is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_GZIP=y
+# CONFIG_RELOCATABLE is not set
+CONFIG_RTC_CLASS=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SAMSUNG_Q10 is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCSI=y
+CONFIG_SCx200=y
+CONFIG_SCx200HR_TIMER=y
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_SCx200_WDT is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_TELCLOCK is not set
+CONFIG_THERMAL=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+CONFIG_UID16=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USER_NS is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+# CONFIG_VIA_WDT is not set
+CONFIG_VM86=y
+# CONFIG_VMWARE_BALLOON is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_W83697UG_WDT is not set
+# CONFIG_WAFER_WDT is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+# CONFIG_X86_32_IRIS is not set
+CONFIG_X86_32_LAZY_GS=y
+# CONFIG_X86_64 is not set
+CONFIG_X86_ALIGNMENT_16=y
+# CONFIG_X86_ANCIENT_MCE is not set
+CONFIG_X86_BSWAP=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_CMPXCHG=y
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# CONFIG_X86_CPUID is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_X86_E_POWERSAVER is not set
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_GX_SUSPMOD is not set
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_INVD_BUG=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_LOCAL_APIC=y
+# CONFIG_X86_LONGRUN is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_AMD=y
+# CONFIG_X86_MCE_INJECT is not set
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
+# CONFIG_X86_PAE is not set
+CONFIG_X86_PAT=y
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_X86_POWERNOW_K6 is not set
+# CONFIG_X86_POWERNOW_K7 is not set
+CONFIG_X86_PPRO_FENCE=y
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_RESERVE_LOW=64
+# CONFIG_X86_SMAP is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_SPEEDSTEP_ICH is not set
+# CONFIG_X86_SPEEDSTEP_LIB is not set
+# CONFIG_X86_SPEEDSTEP_SMI is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_X86_THERMAL_VECTOR=y
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
+CONFIG_XZ_DEC=y
+# CONFIG_ZONE_DMA32 is not set
diff --git a/target/linux/x86/patches-3.7/006-yenta_mistery.patch b/target/linux/x86/patches-3.7/006-yenta_mistery.patch
new file mode 100644
index 0000000000..65893ea2b9
--- /dev/null
+++ b/target/linux/x86/patches-3.7/006-yenta_mistery.patch
@@ -0,0 +1,20 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -1233,6 +1233,17 @@ static int __devinit yenta_probe(struct
+ 
+ 	/* We must finish initialization here */
+ 
++#ifdef CONFIG_X86_RDC321X
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
++#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
++/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
++
++	config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
++	config_writel(socket, 35*4, 0x00000022);
++	config_writel(socket, 36*4, 0x60200000);
++	config_writel(socket, 40*4, 0x7e020000);
++#endif
++
+ 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
+ 		/* No IRQ or request_irq failed. Poll */
+ 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/x86/patches-3.7/009-rdc321x_select_embedded.patch b/target/linux/x86/patches-3.7/009-rdc321x_select_embedded.patch
new file mode 100644
index 0000000000..2d094fc743
--- /dev/null
+++ b/target/linux/x86/patches-3.7/009-rdc321x_select_embedded.patch
@@ -0,0 +1,11 @@
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -466,6 +466,8 @@ config X86_RDC321X
+ 	depends on X86_EXTENDED_PLATFORM
+ 	select M486
+ 	select X86_REBOOTFIXUPS
++	select EMBEDDED
++	select ARCH_REQUIRE_GPIOLIB
+ 	---help---
+ 	  This option is needed for RDC R-321x system-on-chip, also known
+ 	  as R-8610-(G).
diff --git a/target/linux/x86/patches-3.7/010-rdc_cpu_ident.patch b/target/linux/x86/patches-3.7/010-rdc_cpu_ident.patch
new file mode 100644
index 0000000000..0f2314a3e2
--- /dev/null
+++ b/target/linux/x86/patches-3.7/010-rdc_cpu_ident.patch
@@ -0,0 +1,176 @@
+--- /dev/null
++++ b/Documentation/x86/rdc.txt
+@@ -0,0 +1,69 @@
++
++Introduction
++============
++
++RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
++(system-on-chips) for a number of years.  They are not the fastest of
++CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
++coupled with very low power consumption[1] and low cost make them ideal
++for embedded applications.
++
++
++Where to find
++=============
++
++RDC chips show up in numerous embedded devices, but be careful since
++many of them will not run Linux 2.6 without significant expertise.
++
++There are several variants of what the linux kernel refers to generically
++as RDC321X:  R8610, R321x, S3282 and AMRISC20000.
++
++R321x: Found in various routers, see the OpenWrt project for details,
++   http://wiki.openwrt.org/oldwiki/rdcport
++
++R8610: Found on the RDC evaluation board
++   http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
++
++AMRISC20000: Found in the MGB-100 wireless hard disk
++   http://tintuc.no-ip.com/linux/tipps/mgb100/
++
++S3282: Found in various NAS devices, including the Bifferboard
++   http://www.bifferos.com
++
++
++Kernel Configuration
++====================
++
++Add support for this CPU with CONFIG_X86_RDC321X.  Ensure that maths
++emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
++(CONFIG_X86_MCE not selected).
++
++
++CPU detection
++=============
++
++None of these chips support the cpuid instruction, so as with some
++other x86 compatible SoCs, we must check the north bridge and look
++for specific 'signature' PCI device config.
++
++The current detection code has been tested only on the Bifferboard
++(S3282 CPU), please send bug reports or success stories with
++other devices to bifferos@yahoo.co.uk.
++
++
++Credits
++=======
++
++Many thanks to RDC for providing the customer codes to allow
++detection of all known variants, without which this detection code
++would have been very hard to ascertain.
++
++
++References
++==========
++
++[1] S3282 in certain NAS solutions consumes less than 1W
++
++
++mark@bifferos.com 2009
++
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -464,6 +464,7 @@ config X86_RDC321X
+ 	bool "RDC R-321x SoC"
+ 	depends on X86_32
+ 	depends on X86_EXTENDED_PLATFORM
++	select PCI
+ 	select M486
+ 	select X86_REBOOTFIXUPS
+ 	select EMBEDDED
+--- a/arch/x86/include/asm/processor.h
++++ b/arch/x86/include/asm/processor.h
+@@ -119,7 +119,8 @@ struct cpuinfo_x86 {
+ #define X86_VENDOR_CENTAUR	5
+ #define X86_VENDOR_TRANSMETA	7
+ #define X86_VENDOR_NSC		8
+-#define X86_VENDOR_NUM		9
++#define X86_VENDOR_RDC		9
++#define X86_VENDOR_NUM		10
+ 
+ #define X86_VENDOR_UNKNOWN	0xff
+ 
+--- a/arch/x86/kernel/cpu/Makefile
++++ b/arch/x86/kernel/cpu/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix
+ obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
+ obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
+ obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
++obj-$(CONFIG_X86_RDC321X)		+= rdc.o
+ 
+ obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+ 
+--- /dev/null
++++ b/arch/x86/kernel/cpu/rdc.c
+@@ -0,0 +1,69 @@
++/*
++ * See Documentation/x86/rdc.txt
++ *
++ * mark@bifferos.com
++ */
++
++#include <linux/pci.h>
++#include <asm/pci-direct.h>
++#include "cpu.h"
++
++
++static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
++{
++	u16 vendor, device;
++	u32 customer_id;
++
++	if (!early_pci_allowed())
++		return;
++
++	/* RDC CPU is SoC (system-on-chip), Northbridge is always present */
++	vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
++	device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
++
++	if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
++		return;  /* not RDC */
++	/*
++	 * NB: We could go on and check other devices, e.g. r6040 NIC, but
++	 * that's probably overkill
++	 */
++
++	customer_id = read_pci_config(0, 0, 0, 0x90);
++
++	switch (customer_id) {
++		/* id names are from RDC */
++	case 0x00321000:
++		strcpy(c->x86_model_id, "R3210/R3211");
++		break;
++	case 0x00321001:
++		strcpy(c->x86_model_id, "AMITRISC20000/20010");
++		break;
++	case 0x00321002:
++		strcpy(c->x86_model_id, "R3210X/Edimax");
++		break;
++	case 0x00321003:
++		strcpy(c->x86_model_id, "R3210/Kcodes");
++		break;
++	case 0x00321004:  /* tested */
++		strcpy(c->x86_model_id, "S3282/CodeTek");
++		break;
++	case 0x00321007:
++		strcpy(c->x86_model_id, "R8610");
++		break;
++	default:
++		pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
++		break;
++	}
++
++	strcpy(c->x86_vendor_id, "RDC");
++	c->x86_vendor = X86_VENDOR_RDC;
++}
++
++static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
++	.c_vendor	= "RDC",
++	.c_ident	= { "RDC" },
++	.c_identify	= rdc_identify,
++	.c_x86_vendor	= X86_VENDOR_RDC,
++};
++
++cpu_dev_register(rdc_cpu_dev);
diff --git a/target/linux/x86/patches-3.7/011-tune_lzma_options.patch b/target/linux/x86/patches-3.7/011-tune_lzma_options.patch
new file mode 100644
index 0000000000..e6fd44d4e1
--- /dev/null
+++ b/target/linux/x86/patches-3.7/011-tune_lzma_options.patch
@@ -0,0 +1,22 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -296,7 +296,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO     $@
+--- a/arch/x86/include/asm/boot.h
++++ b/arch/x86/include/asm/boot.h
+@@ -28,7 +28,7 @@
+ #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+ #endif
+ 
+-#ifdef CONFIG_KERNEL_BZIP2
++#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
+ #define BOOT_HEAP_SIZE             0x400000
+ #else /* !CONFIG_KERNEL_BZIP2 */
+ 
diff --git a/target/linux/x86/patches-3.7/012-export_erase_write.patch b/target/linux/x86/patches-3.7/012-export_erase_write.patch
new file mode 100644
index 0000000000..893d4d8252
--- /dev/null
+++ b/target/linux/x86/patches-3.7/012-export_erase_write.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/mtdblock.c
++++ b/drivers/mtd/mtdblock.c
+@@ -62,7 +62,7 @@ static void erase_callback(struct erase_
+ 	wake_up(wait_q);
+ }
+ 
+-static int erase_write (struct mtd_info *mtd, unsigned long pos,
++int erase_write (struct mtd_info *mtd, unsigned long pos,
+ 			int len, const char *buf)
+ {
+ 	struct erase_info erase;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -530,6 +530,9 @@ extern void register_mtd_user (struct mt
+ extern int unregister_mtd_user (struct mtd_notifier *old);
+ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+ 
++int erase_write (struct mtd_info *mtd, unsigned long pos,
++		 int len, const char *buf);
++
+ void mtd_erase_callback(struct erase_info *instr);
+ 
+ static inline int mtd_is_bitflip(int err) {
diff --git a/target/linux/x86/patches-3.7/100-rdc_boards.patch b/target/linux/x86/patches-3.7/100-rdc_boards.patch
new file mode 100644
index 0000000000..958bee0064
--- /dev/null
+++ b/target/linux/x86/patches-3.7/100-rdc_boards.patch
@@ -0,0 +1,741 @@
+--- a/arch/x86/Makefile
++++ b/arch/x86/Makefile
+@@ -136,6 +136,9 @@ libs-y  += arch/x86/lib/
+ # See arch/x86/Kbuild for content of core part of the kernel
+ core-y += arch/x86/
+ 
++# RDC R-321X support
++core-$(CONFIG_X86_RDC321X)   += arch/x86/mach-rdc321x/
++
+ # drivers-y are linked after core-y
+ drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+ drivers-$(CONFIG_PCI)            += arch/x86/pci/
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for the RDC321x specific parts of the kernel
++#
++obj-$(CONFIG_X86_RDC321X)	:= platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
++
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/platform.c
+@@ -0,0 +1,115 @@
++/*
++ *  Generic RDC321x platform devices
++ *
++ *  Copyright (C) 2007-2009 OpenWrt.org
++ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/physmap.h>
++#include <linux/root_dev.h>
++
++#include <asm/rdc_boards.h>
++
++static struct rdc_platform_data rdcplat_data;
++
++/* LEDS */
++static struct platform_device rdc321x_leds = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev = {
++		.platform_data = &rdcplat_data.led_data,
++	}
++};
++
++/* Button */
++static struct platform_device rdc321x_buttons = {
++	.name = "gpio-buttons",
++	.id = -1,
++	.dev = {
++		.platform_data = &rdcplat_data.button_data,
++	}
++};
++
++static __initdata struct platform_device *rdc321x_devs[] = {
++	&rdc321x_leds,
++	&rdc321x_buttons,
++};
++
++const char *__initdata boards[] = {
++	"Sitecom",
++	"AR525W",
++	"Bifferboard",
++	"R8610",
++	0
++};
++
++static struct map_info rdc_map_info = {
++	.name		= "rdc_flash",
++	.size		= 0x800000,	/* 8MB */
++	.phys		= 0xFF800000,	/* (u32) -rdc_map_info.size */
++	.bankwidth	= 2,
++};
++
++static int __init rdc_board_setup(void)
++{
++	struct mtd_info *mtdinfo;
++	struct mtd_part_parser_data *ppdata;
++	int res;
++
++	simple_map_init(&rdc_map_info);
++
++	while (1) {
++		rdc_map_info.virt = ioremap(rdc_map_info.phys,
++					    rdc_map_info.size);
++		if (rdc_map_info.virt == NULL)
++			continue;
++
++		mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
++		if (mtdinfo == NULL)
++			mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
++		if (mtdinfo != NULL)
++			break;
++
++		iounmap(rdc_map_info.virt);
++		if ((rdc_map_info.size >>= 1) < 0x100000)	/* 1MB */
++			panic("RDC321x: Could not find start of flash!");
++		rdc_map_info.phys = (u32) -rdc_map_info.size;
++	}
++
++	/*
++	 * TODO: add a new field to mtd_part_parser_data, and use that
++	 * instead of this ugly casting
++	 */
++	ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
++	res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
++	if (res) {
++		panic("RDC321x: can't identify board type");
++		return -ENOSYS;
++	}
++
++	ROOT_DEV = 0;
++
++	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
++}
++late_initcall(rdc_board_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/ar525w.c
+@@ -0,0 +1,247 @@
++/*
++ * ar525w RDC321x platform devices
++ *
++ *  Copyright (C) 2007-2009 OpenWrt.org
++ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/vmalloc.h>
++#include <linux/mtd/mtd.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++	char magic[4];              /* ASICII: GMTK */
++	u32 checksum;               /* CRC32 */
++	u32 version;                /* x.x.x.x */
++	u32 kernelsz;               /* The size of the kernel image */
++	u32 imagesz;                /* The length of this image file ( kernel + romfs + this header) */
++	u32 pid;                    /* Product ID */
++	u32 fastcksum;              /* Partial CRC32 on (First(256), medium(256), last(512)) */
++	u32 reserved;
++};
++
++static struct gpio_led ar525w_leds[] = {
++	{ .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
++};
++static struct gpio_button ar525w_btns[] = {
++	{
++		.gpio = 6,
++		.code = BTN_0,
++		.desc = "Reset",
++		.active_low = 1,
++	}
++};
++
++static u32 __initdata crctab[257] = {
++	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
++	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
++	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
++	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
++	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
++	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
++	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
++	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
++	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
++	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
++	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
++	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
++	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
++	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
++	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
++	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
++	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
++	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
++	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
++	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
++	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
++	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
++	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
++	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
++	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
++	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
++	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
++	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
++	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
++	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
++	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
++	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
++	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
++	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
++	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
++	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
++	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
++	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
++	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
++	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
++	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
++	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
++	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
++	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
++	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
++	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
++	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
++	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
++	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
++	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
++	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
++	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
++	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
++	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
++	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
++	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
++	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
++	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
++	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
++	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
++	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
++	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
++	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
++	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
++	0
++};
++
++static u32 __init crc32(u8 * buf, u32 len)
++{
++	register int i;
++	u32 sum;
++	register u32 s0;
++	s0 = ~0;
++	for (i = 0; i < len; i++) {
++		s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
++	}
++	sum = ~s0;
++	return sum;
++}
++
++static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
++{
++	char *buffer;
++	int res;
++	u32 bufferlength = header->kernelsz + sizeof(struct image_header);
++	u32 len;
++	static char crcbuf[0x400];
++
++	printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
++		   header->imagesz, bufferlength);
++
++	buffer = vmalloc(bufferlength);
++	if (!buffer) {
++		printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
++		return -ENOMEM;
++	}
++
++	res =  master->read(master, 0x0, bufferlength, &len, buffer);
++	if (res || len != bufferlength)
++		goto out;
++
++	header = (struct image_header *) buffer;
++	header->imagesz = bufferlength;
++	header->checksum = 0;
++	header->fastcksum = 0;
++
++	memcpy(crcbuf, buffer, 0x100);
++	memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
++	memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
++
++	header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
++	header->checksum = crc32(buffer, bufferlength);
++
++	if (master->unlock)
++		master->unlock(master, 0, master->erasesize);
++	res = erase_write (master, 0, master->erasesize, buffer);
++	if (res)
++		printk(KERN_ERR "Can't rewrite image header\n");
++
++out:
++	vfree(buffer);
++	return res;
++}
++
++static int __init
++parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++			struct mtd_part_parser_data *plat_data)
++{
++	struct image_header header;
++	int res;
++	size_t len;
++	struct mtd_partition *rdc_flash_parts;
++	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++	if (master->size != 0x400000) //4MB
++		return -ENOSYS;
++
++	res =  master->read(master, 0x0, sizeof(header), &len, (char *)&header);
++	if (res)
++		return res;
++
++	if (strncmp(header.magic, "GMTK", 4))
++		return -ENOSYS;
++
++	if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
++		printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
++		return -EINVAL;
++	}
++
++	if (header.kernelsz + sizeof(header) != header.imagesz) {
++		res = fixup_ar525w_header(master, &header);
++		if (res)
++			return res;
++	}
++
++	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++	rdc_flash_parts[0].name = "firmware";
++	rdc_flash_parts[0].offset = 0x0;
++	rdc_flash_parts[0].size = 0x3E0000;
++	rdc_flash_parts[1].name = "rootfs";
++	rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
++	rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
++	rdc_flash_parts[2].name = "bootloader";
++	rdc_flash_parts[2].offset = 0x3E0000;
++	rdc_flash_parts[2].size = 0x20000;
++
++	*pparts = rdc_flash_parts;
++
++	pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
++	pdata->led_data.leds = ar525w_leds;
++	pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
++	pdata->button_data.buttons = ar525w_btns;
++
++	return 3;
++}
++
++static struct mtd_part_parser __initdata ar525w_parser = {
++	.owner = THIS_MODULE,
++	.parse_fn = parse_ar525w_partitions,
++	.name = "AR525W",
++};
++
++static int __init ar525w_setup(void)
++{
++	return register_mtd_parser(&ar525w_parser);
++}
++
++arch_initcall(ar525w_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
+@@ -0,0 +1,74 @@
++/*
++ *  Bifferboard RDC321x platform devices
++ *
++ *  Copyright (C) 2010 bifferos@yahoo.co.uk
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_bifferboard_partitions(struct mtd_info *master,
++			     struct mtd_partition **pparts,
++			     struct mtd_part_parser_data *plat_data)
++{
++	int res;
++	size_t len;
++	struct mtd_partition *rdc_flash_parts;
++	u32 kernel_len;
++	u16 tmp;
++
++	res =  master->read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
++	if (res)
++		return res;
++	kernel_len = tmp * master->erasesize;
++
++	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
++
++	*pparts = rdc_flash_parts;
++
++	rdc_flash_parts[0].name = "kernel";
++	rdc_flash_parts[0].offset = 0;
++	rdc_flash_parts[0].size = kernel_len;
++	rdc_flash_parts[1].name = "rootfs";
++	rdc_flash_parts[1].offset = kernel_len;
++	rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
++	rdc_flash_parts[2].name = "biffboot";
++	rdc_flash_parts[2].offset = master->size - 0x10000;
++	rdc_flash_parts[2].size = 0x10000;
++
++	return 3;
++}
++
++struct mtd_part_parser __initdata bifferboard_parser = {
++	.owner = THIS_MODULE,
++	.parse_fn = parse_bifferboard_partitions,
++	.name = "Bifferboard",
++};
++
++static int __init bifferboard_setup(void)
++{
++	return register_mtd_parser(&bifferboard_parser);
++}
++arch_initcall(bifferboard_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/r8610.c
+@@ -0,0 +1,69 @@
++/*
++ *  R8610 RDC321x platform devices
++ *
++ *  Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++static int __init
++parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++		       struct mtd_part_parser_data *plat_data)
++{
++	struct mtd_partition *rdc_flash_parts;
++
++	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
++
++	*pparts = rdc_flash_parts;
++
++	rdc_flash_parts[0].name = "kernel";
++	rdc_flash_parts[0].size = 0x001f0000;
++	rdc_flash_parts[0].offset = 0;
++	rdc_flash_parts[1].name = "config";
++	rdc_flash_parts[1].size = 0x10000;
++	rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
++	rdc_flash_parts[2].name = "rootfs";
++	rdc_flash_parts[2].size = 0x1E0000;
++	rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
++	rdc_flash_parts[3].name = "redboot";
++	rdc_flash_parts[3].size = 0x20000;
++	rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
++	rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
++
++	return 4;
++}
++
++struct mtd_part_parser __initdata r8610_parser = {
++	.owner = THIS_MODULE,
++	.parse_fn = parse_r8610_partitions,
++	.name = "R8610",
++};
++
++static int __init r8610_setup(void)
++{
++	return register_mtd_parser(&r8610_parser);
++}
++
++arch_initcall(r8610_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/boards/sitecom.c
+@@ -0,0 +1,115 @@
++/*
++ *  Sitecom RDC321x platform devices
++ *
++ *  Copyright (C) 2007-2009 OpenWrt.org
++ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <asm/rdc_boards.h>
++
++struct image_header {
++	char	magic[4];
++	u32	kernel_length;
++	u32	ramdisk_length;
++	char	magic2[4];
++	u32	kernel_length2;
++};
++
++static struct gpio_led sitecom_leds[] = {
++	{ .name = "rdc321x:power", .gpio = 15, .active_low = 1},
++	{ .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
++	{ .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
++};
++
++static struct gpio_button sitecom_btns[] = {
++	{
++		.gpio = 6,
++		.code = BTN_0,
++		.desc = "Reset",
++		.active_low = 1,
++	}
++};
++
++static int __init
++parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
++			 struct mtd_part_parser_data *plat_data)
++{
++	struct image_header header;
++	int res;
++	size_t len;
++	struct mtd_partition *rdc_flash_parts;
++	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
++
++	if (master->size != 0x400000) /* 4MB */
++		return -ENOSYS;
++
++	res =  master->read(master, 0x8000, sizeof(header), &len, (char *)&header);
++	if (res)
++		return res;
++
++	if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
++		return -ENOSYS;
++
++	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
++
++	rdc_flash_parts[0].name = "firmware";
++	rdc_flash_parts[0].offset = 0x8000;
++	rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
++	rdc_flash_parts[1].name = "config";
++	rdc_flash_parts[1].offset = 0;
++	rdc_flash_parts[1].size = 0x8000;
++	rdc_flash_parts[2].name = "kernel";
++	rdc_flash_parts[2].offset = 0x8014;
++	rdc_flash_parts[2].size = header.kernel_length;
++	rdc_flash_parts[3].name = "rootfs";
++	rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
++	rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
++	rdc_flash_parts[4].name = "bootloader";
++	rdc_flash_parts[4].offset = 0x3F0000;
++	rdc_flash_parts[4].size = 0x10000;
++
++	*pparts = rdc_flash_parts;
++
++	pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
++	pdata->led_data.leds = sitecom_leds;
++	pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
++	pdata->button_data.buttons = sitecom_btns;
++
++	return 5;
++}
++
++struct mtd_part_parser __initdata sitecom_parser = {
++	.owner = THIS_MODULE,
++	.parse_fn = parse_sitecom_partitions,
++	.name = "Sitecom",
++};
++
++static int __init sitecom_setup(void)
++{
++	return register_mtd_parser(&sitecom_parser);
++}
++
++arch_initcall(sitecom_setup);
+--- /dev/null
++++ b/arch/x86/mach-rdc321x/reboot.c
+@@ -0,0 +1,44 @@
++/*
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++static void rdc321x_reset(void)
++{
++	unsigned i;
++
++	/* write to southbridge config register 0x41
++	   enable pci reset on cpu reset, make internal port 0x92 writeable
++	   and switch port 0x92 to internal */
++	outl(0x80003840, 0xCF8);
++	i = inl(0xCFC);
++	i |= 0x1600;
++	outl(i, 0xCFC);
++
++	/* soft reset */
++	outb(1, 0x92);
++}
++
++static int __init rdc_setup_reset(void)
++{
++	machine_ops.emergency_restart = rdc321x_reset;
++	return 0;
++}
++
++arch_initcall(rdc_setup_reset);
+--- /dev/null
++++ b/arch/x86/include/asm/rdc_boards.h
+@@ -0,0 +1,36 @@
++/*
++ *  RDC321x boards
++ *
++ *  Copyright (C) 2007-2009 OpenWrt.org
++ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
++ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License
++ *  as published by the Free Software Foundation; either version 2
++ *  of the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the
++ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ *  Boston, MA  02110-1301, USA.
++ *
++ */
++
++#ifndef _RDC_BOARDS_H__
++#define _RDC_BOARDS_H__
++
++#include <linux/leds.h>
++#include <linux/gpio_buttons.h>
++
++struct rdc_platform_data {
++	struct gpio_led_platform_data led_data;
++	struct gpio_buttons_platform_data button_data;
++};
++
++#endif
diff --git a/target/linux/x86/patches-3.7/120-panic_on_unrecovered_nmi.patch b/target/linux/x86/patches-3.7/120-panic_on_unrecovered_nmi.patch
new file mode 100644
index 0000000000..6a1279ceac
--- /dev/null
+++ b/target/linux/x86/patches-3.7/120-panic_on_unrecovered_nmi.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mfd/rdc321x-southbridge.c
++++ b/drivers/mfd/rdc321x-southbridge.c
+@@ -86,6 +86,8 @@ static int __devinit rdc321x_sb_probe(st
+ 	rdc321x_gpio_pdata.sb_pdev = pdev;
+ 	rdc321x_wdt_pdata.sb_pdev = pdev;
+ 
++	panic_on_unrecovered_nmi = 1;
++
+ 	return mfd_add_devices(&pdev->dev, -1,
+ 		rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+ }
diff --git a/target/linux/x86/patches-3.7/150-pit-tick-rate.patch b/target/linux/x86/patches-3.7/150-pit-tick-rate.patch
new file mode 100644
index 0000000000..5af3cef2fa
--- /dev/null
+++ b/target/linux/x86/patches-3.7/150-pit-tick-rate.patch
@@ -0,0 +1,14 @@
+--- a/include/linux/timex.h
++++ b/include/linux/timex.h
+@@ -274,7 +274,11 @@ extern void hardpps(const struct timespe
+ int read_current_timer(unsigned long *timer_val);
+ 
+ /* The clock frequency of the i8253/i8254 PIT */
++#ifdef CONFIG_X86_RDC321X
++#define PIT_TICK_RATE 1041816ul
++#else
+ #define PIT_TICK_RATE 1193182ul
++#endif
+ 
+ #endif /* KERNEL */
+ 
diff --git a/target/linux/x86/patches-3.7/160-kexec-fix.patch b/target/linux/x86/patches-3.7/160-kexec-fix.patch
new file mode 100644
index 0000000000..ea32494a09
--- /dev/null
+++ b/target/linux/x86/patches-3.7/160-kexec-fix.patch
@@ -0,0 +1,43 @@
+From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
+From: root <root@cent.localnet>
+Date: Sun, 6 Dec 2009 18:26:43 +0000
+Subject: [PATCH 03/14] kexec fix
+
+---
+ arch/x86/kernel/relocate_kernel_32.S |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+--- a/arch/x86/kernel/relocate_kernel_32.S
++++ b/arch/x86/kernel/relocate_kernel_32.S
+@@ -54,8 +54,10 @@ relocate_kernel:
+ 	movl	%eax, CR0(%edi)
+ 	movl	%cr3, %eax
+ 	movl	%eax, CR3(%edi)
++#ifndef CONFIG_X86_RDC321X
+ 	movl	%cr4, %eax
+ 	movl	%eax, CR4(%edi)
++#endif
+ 
+ 	/* read the arguments and say goodbye to the stack */
+ 	movl  20+4(%esp), %ebx /* page_list */
+@@ -124,7 +126,9 @@ identity_mapped:
+ 	 * Setting everything to zero seems safe.
+ 	 */
+ 	xorl	%eax, %eax
++#ifndef CONFIG_X86_RDC321X
+ 	movl	%eax, %cr4
++#endif
+ 
+ 	jmp 1f
+ 1:
+@@ -195,8 +199,10 @@ identity_mapped:
+ 	ret
+ 
+ virtual_mapped:
++#ifndef CONFIG_X86_RDC321X
+ 	movl	CR4(%edi), %eax
+ 	movl	%eax, %cr4
++#endif
+ 	movl	CR3(%edi), %eax
+ 	movl	%eax, %cr3
+ 	movl	CR0(%edi), %eax