[ubicom32]: add 2.6.32 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19823 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 25 insertions, 9 deletions

diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
index e6c7392e06..e9c62f4625 100644
--- a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
+++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c
@@ -634,6 +634,19 @@ void ubi32_eth_cleanup(void)
 	}
 }
 
+	static const struct net_device_ops ubi32_netdev_ops = {
+		.ndo_open		= ubi32_eth_open,
+		.ndo_stop		= ubi32_eth_close,
+		.ndo_start_xmit		= ubi32_eth_start_xmit,
+		.ndo_tx_timeout		= ubi32_eth_tx_timeout,
+		.ndo_do_ioctl		= ubi32_eth_ioctl,
+		.ndo_change_mtu		= ubi32_eth_change_mtu,
+		.ndo_set_config		= ubi32_eth_set_config,
+		.ndo_get_stats		= ubi32_eth_get_stats,
+		.ndo_validate_addr	= eth_validate_addr,
+		.ndo_set_mac_address	= eth_mac_addr,
+	};
+
 int ubi32_eth_init_module(void)
 {
 	struct ethtionode *eth_node;
@@ -706,16 +719,9 @@ int ubi32_eth_init_module(void)
 
 		spin_lock_init(&priv->lock);
 
-		dev->open		= ubi32_eth_open;
-		dev->stop		= ubi32_eth_close;
-		dev->hard_start_xmit	= ubi32_eth_start_xmit;
-		dev->tx_timeout		= ubi32_eth_tx_timeout;
-		dev->watchdog_timeo	= UBI32_ETH_VP_TX_TIMEOUT;
+		dev->netdev_ops = &ubi32_netdev_ops;
 
-		dev->set_config		= ubi32_eth_set_config;
-		dev->do_ioctl		= ubi32_eth_ioctl;
-		dev->get_stats		= ubi32_eth_get_stats;
-		dev->change_mtu		= ubi32_eth_change_mtu;
+		dev->watchdog_timeo	= UBI32_ETH_VP_TX_TIMEOUT;
 #ifdef UBICOM32_USE_NAPI
 		netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT);
 #endif
diff --git a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
index fc0d6d21b6..f14fcdfd9a 100644
--- a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
+++ b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c
@@ -34,6 +34,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/version.h>
 
 #include <asm/ip5000.h>
 
@@ -259,8 +260,13 @@ static void ubi32_mailbox_enable_ms(struct uart_port *port)
 
 static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
 {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+	struct uart_state *state = uart->port.state;
+	struct tty_struct *tty = state->port.tty;
+#else
 	struct uart_info *info = uart->port.info;
 	struct tty_struct *tty = info->port.tty;
+#endif
 	unsigned int status, ch, flg;
 
 	status = 0; // XXX? UART_GET_LSR(uart);
@@ -308,7 +314,11 @@ static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart)
 
 static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart)
 {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
+	struct circ_buf *xmit = &uart->port.state->xmit;
+#else
 	struct circ_buf *xmit = &uart->port.info->xmit;
+#endif
 
 	if (uart->port.x_char) {
 		UART_PUT_CHAR(uart, uart->port.x_char);