[ubicom32] remove target

This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34430 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 267 deletions

diff --git a/target/linux/ubicom32/files/drivers/spi/spi_ubicom32_gpio.c b/target/linux/ubicom32/files/drivers/spi/spi_ubicom32_gpio.c
deleted file mode 100644
index c41018a26d..0000000000
--- a/target/linux/ubicom32/files/drivers/spi/spi_ubicom32_gpio.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * drivers/spi_spi_ubicom32_gpio.c
- *	Ubicom32 GPIO based SPI driver
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port.  If not,
- * see <http://www.gnu.org/licenses/>.
- *
- * Ubicom32 implementation derived from (with many thanks):
- *   arch/m68knommu
- *   arch/blackfin
- *   arch/parisc
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#include <linux/gpio.h>
-
-#include <asm/ubicom32-spi-gpio.h>
-
-#define DRIVER_NAME "ubicom32-spi-gpio"
-
-struct ubicom32_spi_gpio {
-	struct spi_bitbang			 bitbang;
-
-	struct ubicom32_spi_gpio_platform_data	*pdata;
-
-	struct platform_device			*dev;
-};
-
-/*
- * The following 4 functions are used by EXPAND_BITBANG_TXRX to bitbang the data out.
- */
-static inline void setsck(struct spi_device *dev, int on)
-{
-	struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-	gpio_set_value(usg->pdata->pin_clk, on ? 1 : 0);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
-	struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-	gpio_set_value(usg->pdata->pin_mosi, on ? 1 : 0);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
-	struct ubicom32_spi_gpio *usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(dev->master);
-	return gpio_get_value(usg->pdata->pin_miso) ? 1 : 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#define	EXPAND_BITBANG_TXRX
-#include <linux/spi/spi_bitbang.h>
-
-/*
- * ubicom32_spi_gpio_txrx_mode0
- */
-static u32 ubicom32_spi_gpio_txrx_mode0(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode1
- */
-static u32 ubicom32_spi_gpio_txrx_mode1(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode2
- */
-static u32 ubicom32_spi_gpio_txrx_mode2(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_txrx_mode3
- */
-static u32 ubicom32_spi_gpio_txrx_mode3(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-}
-
-/*
- * ubicom32_spi_gpio_chipselect
- */
-static void ubicom32_spi_gpio_chipselect(struct spi_device *dev, int value)
-{
-	struct ubicom32_spi_gpio_controller_data *cd = (struct ubicom32_spi_gpio_controller_data *)dev->controller_data;
-	unsigned int cs_polarity = dev->mode & SPI_CS_HIGH ? 1 : 0;
-
-	if (value == BITBANG_CS_ACTIVE) {
-		gpio_set_value(cd->pin_cs, cs_polarity);
-		return;
-	}
-	gpio_set_value(cd->pin_cs, !cs_polarity);
-}
-
-/*
- * ubicom32_spi_gpio_probe
- */
-static int ubicom32_spi_gpio_probe(struct platform_device *dev)
-{
-	struct ubicom32_spi_gpio_platform_data *pdata;
-	struct spi_master *master;
-	struct ubicom32_spi_gpio *usg;
-	int ret;
-
-	master = spi_alloc_master(&dev->dev, sizeof(struct ubicom32_spi_gpio));
-	if (master == NULL) {
-		dev_err(&dev->dev, "failed to allocate spi master\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	usg = (struct ubicom32_spi_gpio *)spi_master_get_devdata(master);
-
-	platform_set_drvdata(dev, usg);
-
-	/*
-	 * Copy in the platform data
-	 */
-	pdata = dev->dev.platform_data;
-	usg->pdata = dev->dev.platform_data;
-
-	/*
-	 * Request the GPIO lines
-	 */
-	ret = gpio_request(pdata->pin_mosi, "spi-mosi");
-	if (ret) {
-		dev_err(&dev->dev, "Failed to allocate spi-mosi GPIO\n");
-		goto err;
-	}
-
-	ret = gpio_request(pdata->pin_miso, "spi-miso");
-	if (ret) {
-		dev_err(&dev->dev, "Failed to allocate spi-miso GPIO\n");
-		goto err_nomiso;
-	}
-
-	ret = gpio_request(pdata->pin_clk, "spi-clk");
-	if (ret) {
-		dev_err(&dev->dev, "Failed to allocate spi-clk GPIO\n");
-		goto err_noclk;
-	}
-
-	/*
-	 * Setup spi-bitbang adaptor
-	 */
-	usg->bitbang.flags |= SPI_CS_HIGH;
-	usg->bitbang.master = spi_master_get(master);
-	usg->bitbang.master->bus_num = pdata->bus_num;
-	usg->bitbang.master->num_chipselect = pdata->num_chipselect;
-	usg->bitbang.chipselect = ubicom32_spi_gpio_chipselect;
-
-	usg->bitbang.txrx_word[SPI_MODE_0] = ubicom32_spi_gpio_txrx_mode0;
-	usg->bitbang.txrx_word[SPI_MODE_1] = ubicom32_spi_gpio_txrx_mode1;
-	usg->bitbang.txrx_word[SPI_MODE_2] = ubicom32_spi_gpio_txrx_mode2;
-	usg->bitbang.txrx_word[SPI_MODE_3] = ubicom32_spi_gpio_txrx_mode3;
-
-	/*
-	 * Setup the GPIO pins
-	 */
-	gpio_direction_output(pdata->pin_clk, pdata->clk_default);
-	gpio_direction_output(pdata->pin_mosi, 0);
-	gpio_direction_input(pdata->pin_miso);
-
-	/*
-	 * Ready to go
-	 */
-	ret = spi_bitbang_start(&usg->bitbang);
-	if (ret) {
-		goto err_no_bitbang;
-	}
-
-	return 0;
-
-err_no_bitbang:
-	spi_master_put(usg->bitbang.master);
-
-	gpio_free(pdata->pin_clk);
-
-err_noclk:
-	gpio_free(pdata->pin_miso);
-
-err_nomiso:
-	gpio_free(pdata->pin_mosi);
-
-err:
-	return ret;
-}
-
-/*
- * ubicom32_spi_gpio_remove
- */
-static int ubicom32_spi_gpio_remove(struct platform_device *dev)
-{
-	struct ubicom32_spi_gpio *sp = platform_get_drvdata(dev);
-
-	spi_bitbang_stop(&sp->bitbang);
-	spi_master_put(sp->bitbang.master);
-
-	return 0;
-}
-
-/*
- * Work with hotplug and coldplug
- */
-MODULE_ALIAS("platform:ubicom32_spi_gpio");
-
-static struct platform_driver ubicom32_spi_gpio_drv = {
-	.probe		= ubicom32_spi_gpio_probe,
-        .remove		= ubicom32_spi_gpio_remove,
-        .driver		= {
-		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
-        },
-};
-
-/*
- * ubicom32_spi_gpio_init
- */
-static int __init ubicom32_spi_gpio_init(void)
-{
-        return platform_driver_register(&ubicom32_spi_gpio_drv);
-}
-
-/*
- * ubicom32_spi_gpio_exit
- */
-static void __exit ubicom32_spi_gpio_exit(void)
-{
-        platform_driver_unregister(&ubicom32_spi_gpio_drv);
-}
-
-module_init(ubicom32_spi_gpio_init);
-module_exit(ubicom32_spi_gpio_exit);
-
-MODULE_DESCRIPTION("Ubicom32 SPI-GPIO Driver");
-MODULE_AUTHOR("Pat Tjin, <@ubicom.com>");
-MODULE_LICENSE("GPL");