finally move buildroot-ng to trunk

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5059 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 2309 insertions, 0 deletions

diff --git a/target/linux/sibyte-2.6/Makefile b/target/linux/sibyte-2.6/Makefile
new file mode 100644
index 0000000000..30fa1a85a1
--- /dev/null
+++ b/target/linux/sibyte-2.6/Makefile
@@ -0,0 +1,22 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+LINUX_VERSION:=2.6.17
+LINUX_RELEASE:=1
+LINUX_KERNEL_MD5SUM:=37ddefe96625502161f075b9d907f21e
+
+include ./config
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/kernel-build.mk
+
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+	[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches
+	[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches
+	@$(CP) config $(LINUX_DIR)/.config
+	touch $@
+
diff --git a/target/linux/sibyte-2.6/config b/target/linux/sibyte-2.6/config
new file mode 100644
index 0000000000..79c4c72f06
--- /dev/null
+++ b/target/linux/sibyte-2.6/config
@@ -0,0 +1,1313 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16.4
+# Fri Apr 21 16:08:33 2006
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+CONFIG_SIBYTE_SWARM=y
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_SB1250=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+CONFIG_CPU_SB1_PASS_4=y
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+CONFIG_SIBYTE_HAS_LDT=y
+# CONFIG_SIMULATION is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
+CONFIG_SIBYTE_CFE=y
+CONFIG_SIBYTE_CFE_CONSOLE=y
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE="../root"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+# CONFIG_IOSCHED_NOOP is not set
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is noet set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_IRC=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_TIME=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_POLICY is not set
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_IMQ=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_TARGET_ROUTE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_SET=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_MATCH_SET=m
+CONFIG_IP_NF_TARGET_SET=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+# CONFIG_IP6_NF_MATCH_POLICY is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_IMQ=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_ROUTE=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_CLIP_NO_ICMP=y
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_ESFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_NETROM is not set
+# CONFIG_ROSE is not set
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+# CONFIG_6PACK is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_YAM is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOSTAP_PCI is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# ATM drivers
+#
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+# CONFIG_AU1000_UART is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_SB1XXX_CORELIS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/target/linux/sibyte-2.6/patches/000-DUART.patch b/target/linux/sibyte-2.6/patches/000-DUART.patch
new file mode 100644
index 0000000000..fe899f1453
--- /dev/null
+++ b/target/linux/sibyte-2.6/patches/000-DUART.patch
@@ -0,0 +1,957 @@
+diff -Nur linux-2.6.17/drivers/char/Kconfig linux-2.6.17-owrt/drivers/char/Kconfig
+--- linux-2.6.17/drivers/char/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/drivers/char/Kconfig	2006-06-18 12:41:36.000000000 +0200
+@@ -340,6 +340,14 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called istallion.
+ 
++config SIBYTE_SB1250_DUART
++	bool "Support for BCM1xxx onchip DUART"
++	depends on MIPS && SIBYTE_SB1xxx_SOC=y
++
++config SIBYTE_SB1250_DUART_CONSOLE
++	bool "Console on BCM1xxx DUART"
++	depends on SIBYTE_SB1250_DUART
++
+ config AU1000_UART
+ 	bool "Enable Au1000 UART Support"
+ 	depends on SERIAL_NONSTANDARD && MIPS
+diff -Nur linux-2.6.17/drivers/char/Makefile linux-2.6.17-owrt/drivers/char/Makefile
+--- linux-2.6.17/drivers/char/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/drivers/char/Makefile	2006-06-18 12:42:57.000000000 +0200
+@@ -31,6 +31,7 @@
+ obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
+ obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
+ obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
+ obj-$(CONFIG_COMPUTONE)		+= ip2/
+ obj-$(CONFIG_RISCOM8)		+= riscom8.o
+ obj-$(CONFIG_ISI)		+= isicom.o
+diff -Nur linux-2.6.17/drivers/char/sb1250_duart.c linux-2.6.17-owrt/drivers/char/sb1250_duart.c
+--- linux-2.6.17/drivers/char/sb1250_duart.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/char/sb1250_duart.c	2006-06-18 12:41:36.000000000 +0200
+@@ -0,0 +1,911 @@
++/*
++ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++/* 
++ * Driver support for the on-chip sb1250 dual-channel serial port,
++ * running in asynchronous mode.  Also, support for doing a serial console
++ * on one of those ports 
++ */
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/console.h>
++#include <linux/kdev_t.h>
++#include <linux/major.h>
++#include <linux/termios.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/errno.h>
++#include <linux/tty.h>
++#include <linux/sched.h>
++#include <linux/tty_flip.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <asm/delay.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/sibyte/swarm.h>
++#include <asm/sibyte/sb1250.h>
++#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
++#include <asm/sibyte/bcm1480_regs.h>
++#include <asm/sibyte/bcm1480_int.h>
++#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
++#include <asm/sibyte/sb1250_regs.h>
++#include <asm/sibyte/sb1250_int.h>
++#else
++#error invalid SiByte UART configuation
++#endif
++#include <asm/sibyte/sb1250_uart.h>
++#include <asm/war.h>
++
++#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
++#define UNIT_CHANREG(n,reg)	A_BCM1480_DUART_CHANREG((n),(reg))
++#define UNIT_IMRREG(n)		A_BCM1480_DUART_IMRREG(n)
++#define UNIT_INT(n)		(K_BCM1480_INT_UART_0 + (n))
++#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
++#define UNIT_CHANREG(n,reg)	A_DUART_CHANREG((n),(reg))
++#define UNIT_IMRREG(n)		A_DUART_IMRREG(n)
++#define UNIT_INT(n)		(K_INT_UART_0 + (n))
++#else
++#error invalid SiByte UART configuation
++#endif
++
++/* Toggle spewing of debugging output */
++#undef DEBUG
++
++#define DEFAULT_CFLAGS          (CS8 | B115200)
++
++#define TX_INTEN          1
++#define DUART_INITIALIZED 2
++
++#define DUART_MAX_LINE 4
++char sb1250_duart_present[DUART_MAX_LINE];
++EXPORT_SYMBOL(sb1250_duart_present);
++
++/*
++ * Still not sure what the termios structures set up here are for, 
++ *  but we have to supply pointers to them to register the tty driver
++ */
++static struct tty_driver *sb1250_duart_driver; //, sb1250_duart_callout_driver;
++
++/*
++ * This lock protects both the open flags for all the uart states as 
++ * well as the reference count for the module
++ */
++static DEFINE_SPINLOCK(open_lock);
++
++typedef struct { 
++	unsigned char       outp_buf[SERIAL_XMIT_SIZE];
++	unsigned int        outp_head;
++	unsigned int        outp_tail;
++	unsigned int        outp_count;
++	spinlock_t          outp_lock;
++	unsigned int        open;
++	unsigned int        line;
++	unsigned int        last_cflags;
++	unsigned long       flags;
++	struct tty_struct   *tty;
++	/* CSR addresses */
++	volatile u32	    *status;
++	volatile u32	    *imr;
++	volatile u32	    *tx_hold;
++	volatile u32	    *rx_hold;
++	volatile u32	    *mode_1;
++	volatile u32	    *mode_2;
++	volatile u32	    *clk_sel;
++	volatile u32	    *cmd;
++} uart_state_t;
++
++static uart_state_t uart_states[DUART_MAX_LINE];
++
++/*
++ * Inline functions local to this module 
++ */
++
++/*
++ * In bug 1956, we get glitches that can mess up uart registers.  This
++ * "write-mode-1 after any register access" is the accepted
++ * workaround.
++ */
++#if SIBYTE_1956_WAR
++static unsigned int last_mode1[DUART_MAX_LINE];
++#endif
++
++static inline u32 READ_SERCSR(volatile u32 *addr, int line)
++{
++	u32 val = csr_in32(addr);
++#if SIBYTE_1956_WAR
++	csr_out32(last_mode1[line], uart_states[line].mode_1);
++#endif
++	return val;
++}
++
++static inline void WRITE_SERCSR(u32 val, volatile u32 *addr, int line)
++{
++	csr_out32(val, addr);
++#if SIBYTE_1956_WAR
++	csr_out32(last_mode1[line], uart_states[line].mode_1);
++#endif
++}
++
++static void init_duart_port(uart_state_t *port, int line)
++{
++	if (!(port->flags & DUART_INITIALIZED)) {
++		port->line = line;
++		port->status = IOADDR(UNIT_CHANREG(line, R_DUART_STATUS));
++		port->imr = IOADDR(UNIT_IMRREG(line));
++		port->tx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_TX_HOLD));
++		port->rx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_RX_HOLD));
++		port->mode_1 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_1));
++		port->mode_2 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_2));
++		port->clk_sel = IOADDR(UNIT_CHANREG(line, R_DUART_CLK_SEL));
++		port->cmd = IOADDR(UNIT_CHANREG(line, R_DUART_CMD));
++		port->flags |= DUART_INITIALIZED;
++	}
++}
++
++/*
++ * Mask out the passed interrupt lines at the duart level.  This should be
++ * called while holding the associated outp_lock.
++ */
++static inline void duart_mask_ints(unsigned int line, unsigned int mask)
++{
++	uart_state_t *port = uart_states + line;
++	u64 tmp = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(tmp & ~mask, port->imr, line);
++}
++
++	
++/* Unmask the passed interrupt lines at the duart level */
++static inline void duart_unmask_ints(unsigned int line, unsigned int mask)
++{
++	uart_state_t *port = uart_states + line;
++	u64 tmp = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(tmp | mask, port->imr, line);
++}
++
++static inline void transmit_char_pio(uart_state_t *us)
++{
++	struct tty_struct *tty = us->tty;
++	int blocked = 0;
++
++	if (spin_trylock(&us->outp_lock)) {
++		for (;;) {
++			if (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_RDY))
++				break;
++			if (us->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
++				break;
++			} else {
++				WRITE_SERCSR(us->outp_buf[us->outp_head],
++					     us->tx_hold, us->line);
++				us->outp_head = (us->outp_head + 1) & (SERIAL_XMIT_SIZE-1);
++				if (--us->outp_count <= 0)
++					break;
++			}
++			udelay(10);
++		}
++		spin_unlock(&us->outp_lock);
++	} else {
++		blocked = 1;
++	}
++
++	if (!us->outp_count || tty->stopped ||
++	    tty->hw_stopped || blocked) {
++		us->flags &= ~TX_INTEN;
++		duart_mask_ints(us->line, M_DUART_IMR_TX);
++	}
++
++      	if (us->open &&
++	    (us->outp_count < (SERIAL_XMIT_SIZE/2))) {
++		/*
++		 * We told the discipline at one point that we had no
++		 * space, so it went to sleep.  Wake it up when we hit
++		 * half empty
++		 */
++		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
++		    tty->ldisc.write_wakeup)
++			tty->ldisc.write_wakeup(tty);
++		wake_up_interruptible(&tty->write_wait);
++	}
++}
++
++/* 
++ * Generic interrupt handler for both channels.  dev_id is a pointer
++ * to the proper uart_states structure, so from that we can derive 
++ * which port interrupted 
++ */
++
++static irqreturn_t duart_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++	uart_state_t *us = (uart_state_t *)dev_id;
++	struct tty_struct *tty = us->tty;
++	unsigned int status = READ_SERCSR(us->status, us->line);
++
++	pr_debug("DUART INT\n");
++
++	if (status & M_DUART_RX_RDY) {
++		int counter = 2048;
++		unsigned int ch;
++
++		if (status & M_DUART_OVRUN_ERR)
++			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++		if (status & M_DUART_PARITY_ERR) {
++			printk("Parity error!\n");
++		} else if (status & M_DUART_FRM_ERR) {
++			printk("Frame error!\n");
++		}
++
++		while (counter > 0) {
++			if (!(READ_SERCSR(us->status, us->line) & M_DUART_RX_RDY))
++				break;
++			ch = READ_SERCSR(us->rx_hold, us->line);
++			tty_insert_flip_char(tty, ch, 0);
++			udelay(1);
++			counter--;
++		}
++		tty_flip_buffer_push(tty);
++	}
++
++	if (status & M_DUART_TX_RDY) {
++		transmit_char_pio(us);
++	}
++
++	return IRQ_HANDLED;
++}
++
++/*
++ *  Actual driver functions
++ */
++
++/* Return the number of characters we can accomodate in a write at this instant */
++static int duart_write_room(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	int retval;
++
++	retval = SERIAL_XMIT_SIZE - us->outp_count;
++
++	pr_debug("duart_write_room called, returning %i\n", retval);
++
++	return retval;
++}
++
++/* memcpy the data from src to destination, but take extra care if the
++   data is coming from user space */
++static inline int copy_buf(char *dest, const char *src, int size, int from_user) 
++{
++	if (from_user) {
++		(void) copy_from_user(dest, src, size); 
++	} else {
++		memcpy(dest, src, size);
++	}
++	return size;
++}
++
++/*
++ * Buffer up to count characters from buf to be written.  If we don't have
++ * other characters buffered, enable the tx interrupt to start sending
++ */
++static int duart_write(struct tty_struct *tty, const unsigned char *buf,
++		       int count)
++{
++	uart_state_t *us;
++	int c, t, total = 0;
++	unsigned long flags;
++
++	if (!tty) return 0;
++
++	us = tty->driver_data;
++	if (!us) return 0;
++
++	pr_debug("duart_write called for %i chars by %i (%s)\n", count, current->pid, current->comm);
++
++	spin_lock_irqsave(&us->outp_lock, flags);
++
++	for (;;) {
++		c = count;
++
++		t = SERIAL_XMIT_SIZE - us->outp_tail;
++		if (t < c) c = t;
++
++		t = SERIAL_XMIT_SIZE - 1 - us->outp_count;
++		if (t < c) c = t;
++
++		if (c <= 0) break;
++
++		memcpy(us->outp_buf + us->outp_tail, buf, c);
++
++		us->outp_count += c;
++		us->outp_tail = (us->outp_tail + c) & (SERIAL_XMIT_SIZE - 1);
++		buf += c;
++		count -= c;
++		total += c;
++	}
++
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++
++	if (us->outp_count && !tty->stopped && 
++	    !tty->hw_stopped && !(us->flags & TX_INTEN)) {
++		us->flags |= TX_INTEN;
++		duart_unmask_ints(us->line, M_DUART_IMR_TX);
++	}
++
++	return total;
++}
++
++
++/* Buffer one character to be written.  If there's not room for it, just drop
++   it on the floor.  This is used for echo, among other things */
++static void duart_put_char(struct tty_struct *tty, u_char ch)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_put_char called.  Char is %x (%c)\n", (int)ch, ch);
++
++	spin_lock_irqsave(&us->outp_lock, flags);
++
++	if (us->outp_count == SERIAL_XMIT_SIZE) {
++		spin_unlock_irqrestore(&us->outp_lock, flags);
++		return;
++	}
++
++	us->outp_buf[us->outp_tail] = ch;
++	us->outp_tail = (us->outp_tail + 1) &(SERIAL_XMIT_SIZE-1);
++	us->outp_count++;
++
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++}
++
++static void duart_flush_chars(struct tty_struct * tty)
++{
++	uart_state_t *port;
++
++	if (!tty) return;
++
++	port = tty->driver_data;
++
++	if (!port) return;
++
++	if (port->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
++		return;
++	}
++
++	port->flags |= TX_INTEN;
++	duart_unmask_ints(port->line, M_DUART_IMR_TX);
++}
++
++/* Return the number of characters in the output buffer that have yet to be 
++   written */
++static int duart_chars_in_buffer(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	int retval;
++
++	retval = us->outp_count;
++
++	pr_debug("duart_chars_in_buffer returning %i\n", retval);
++
++	return retval;
++}
++
++/* Kill everything we haven't yet shoved into the FIFO.  Turn off the
++   transmit interrupt since we've nothing more to transmit */
++static void duart_flush_buffer(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_flush_buffer called\n");
++	spin_lock_irqsave(&us->outp_lock, flags);
++	us->outp_head = us->outp_tail = us->outp_count = 0;
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++
++	wake_up_interruptible(&us->tty->write_wait);
++	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
++	    tty->ldisc.write_wakeup)
++		tty->ldisc.write_wakeup(tty);
++}
++
++
++/* See sb1250 user manual for details on these registers */
++static inline void duart_set_cflag(unsigned int line, unsigned int cflag)
++{
++	unsigned int mode_reg1 = 0, mode_reg2 = 0;
++	unsigned int clk_divisor;
++	uart_state_t *port = uart_states + line;
++
++	switch (cflag & CSIZE) {
++	case CS7:
++		mode_reg1 |= V_DUART_BITS_PER_CHAR_7;
++		
++	default:
++		/* We don't handle CS5 or CS6...is there a way we're supposed to flag this? 
++		   right now we just force them to CS8 */
++		mode_reg1 |= 0x0;
++		break;
++	}
++	if (cflag & CSTOPB) {
++	        mode_reg2 |= M_DUART_STOP_BIT_LEN_2;
++	}
++	if (!(cflag & PARENB)) {
++	        mode_reg1 |= V_DUART_PARITY_MODE_NONE;
++	}
++	if (cflag & PARODD) {
++		mode_reg1 |= M_DUART_PARITY_TYPE_ODD;
++	}
++	
++	/* Formula for this is (5000000/baud)-1, but we saturate
++	   at 12 bits, which means we can't actually do anything less
++	   that 1200 baud */
++	switch (cflag & CBAUD) {
++	case B200:	
++	case B300:	
++	case B1200:	clk_divisor = 4095;		break;
++	case B1800:	clk_divisor = 2776;		break;
++	case B2400:	clk_divisor = 2082;		break;
++	case B4800:	clk_divisor = 1040;		break;
++	default:
++	case B9600:	clk_divisor = 519;		break;
++	case B19200:	clk_divisor = 259;		break;
++	case B38400:	clk_divisor = 129;		break;
++	case B57600:	clk_divisor = 85;		break;
++	case B115200:	clk_divisor = 42;		break;
++	}
++	WRITE_SERCSR(mode_reg1, port->mode_1, port->line);
++	WRITE_SERCSR(mode_reg2, port->mode_2, port->line);
++	WRITE_SERCSR(clk_divisor, port->clk_sel, port->line);
++	port->last_cflags = cflag;
++}
++
++
++/* Handle notification of a termios change.  */
++static void duart_set_termios(struct tty_struct *tty, struct termios *old)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_set_termios called by %i (%s)\n", current->pid, current->comm);
++	if (old && tty->termios->c_cflag == old->c_cflag)
++		return;
++	duart_set_cflag(us->line, tty->termios->c_cflag);
++}
++
++static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) {
++
++	struct serial_struct tmp;
++
++	memset(&tmp, 0, sizeof(tmp));
++
++	tmp.type=PORT_SB1250;
++	tmp.line=us->line;
++	tmp.port=UNIT_CHANREG(tmp.line,0);
++	tmp.irq=UNIT_INT(tmp.line);
++	tmp.xmit_fifo_size=16; /* fixed by hw */
++	tmp.baud_base=5000000;
++	tmp.io_type=SERIAL_IO_MEM;
++
++	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
++		return -EFAULT;
++
++	return 0;
++}
++
++static int duart_ioctl(struct tty_struct *tty, struct file * file,
++		       unsigned int cmd, unsigned long arg)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++/*	if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
++	return -ENODEV;*/
++	switch (cmd) {
++	case TIOCMGET:
++		printk("Ignoring TIOCMGET\n");
++		break;
++	case TIOCMBIS:
++		printk("Ignoring TIOCMBIS\n");
++		break;
++	case TIOCMBIC:
++		printk("Ignoring TIOCMBIC\n");
++		break;
++	case TIOCMSET:
++		printk("Ignoring TIOCMSET\n");
++		break;
++	case TIOCGSERIAL:
++		return get_serial_info(us,(struct serial_struct *) arg);
++	case TIOCSSERIAL:
++		printk("Ignoring TIOCSSERIAL\n");
++		break;
++	case TIOCSERCONFIG:
++		printk("Ignoring TIOCSERCONFIG\n");
++		break;
++	case TIOCSERGETLSR: /* Get line status register */
++		printk("Ignoring TIOCSERGETLSR\n");
++		break;
++	case TIOCSERGSTRUCT:
++		printk("Ignoring TIOCSERGSTRUCT\n");
++		break;
++	case TIOCMIWAIT:
++		printk("Ignoring TIOCMIWAIT\n");
++		break;
++	case TIOCGICOUNT:
++		printk("Ignoring TIOCGICOUNT\n");
++		break;
++	case TIOCSERGWILD:
++		printk("Ignoring TIOCSERGWILD\n");
++		break;
++	case TIOCSERSWILD:
++		printk("Ignoring TIOCSERSWILD\n");
++		break;
++	default:
++		break;
++	}
++//	printk("Ignoring IOCTL %x from pid %i (%s)\n", cmd, current->pid, current->comm);
++	return -ENOIOCTLCMD;
++}
++
++/* XXXKW locking? */
++static void duart_start(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_start called\n");
++
++	if (us->outp_count && !(us->flags & TX_INTEN)) {
++		us->flags |= TX_INTEN;
++		duart_unmask_ints(us->line, M_DUART_IMR_TX);
++	}
++}
++
++/* XXXKW locking? */
++static void duart_stop(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_stop called\n");
++
++	if (us->outp_count && (us->flags & TX_INTEN)) {
++		us->flags &= ~TX_INTEN;
++		duart_mask_ints(us->line, M_DUART_IMR_TX);
++	}
++}
++
++/* Not sure on the semantics of this; are we supposed to wait until the stuff
++   already in the hardware FIFO drains, or are we supposed to wait until 
++   we've drained the output buffer, too?  I'm assuming the former, 'cause thats
++   what the other drivers seem to assume 
++*/
++
++static void duart_wait_until_sent(struct tty_struct *tty, int timeout)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long orig_jiffies;
++
++	orig_jiffies = jiffies;
++	pr_debug("duart_wait_until_sent(%d)+\n", timeout);
++	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT)) {
++		set_current_state(TASK_INTERRUPTIBLE);
++	 	schedule_timeout(1);
++		if (signal_pending(current))
++			break;
++		if (timeout && time_after(jiffies, orig_jiffies + timeout))
++			break;
++	}
++	pr_debug("duart_wait_until_sent()-\n");
++}
++
++/*
++ * duart_hangup() --- called by tty_hangup() when a hangup is signaled.
++ */
++static void duart_hangup(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	duart_flush_buffer(tty);
++	us->open = 0;
++	us->tty = 0;
++}
++
++/*
++ * Open a tty line.  Note that this can be called multiple times, so ->open can
++ * be >1.  Only set up the tty struct if this is a "new" open, e.g. ->open was
++ * zero
++ */
++static int duart_open(struct tty_struct *tty, struct file *filp)
++{
++	uart_state_t *us;
++	unsigned int line = tty->index;
++	unsigned long flags;
++
++	if ((line >= tty->driver->num) || !sb1250_duart_present[line])
++		return -ENODEV;
++
++	pr_debug("duart_open called by %i (%s), tty is %p, rw is %p, ww is %p\n",
++	       current->pid, current->comm, tty, tty->read_wait,
++	       tty->write_wait);
++
++	us = uart_states + line;
++	tty->driver_data = us;
++
++	spin_lock_irqsave(&open_lock, flags);
++	if (!us->open) {
++		us->tty = tty;
++		us->tty->termios->c_cflag = us->last_cflags;
++	}
++	us->open++;
++	us->flags &= ~TX_INTEN;
++	duart_unmask_ints(line, M_DUART_IMR_RX);
++	spin_unlock_irqrestore(&open_lock, flags);
++
++	return 0;
++}
++
++
++/*
++ * Close a reference count out.  If reference count hits zero, null the
++ * tty, kill the interrupts.  The tty_io driver is responsible for making
++ * sure we've cleared out our internal buffers before calling close()
++ */
++static void duart_close(struct tty_struct *tty, struct file *filp)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_close called by %i (%s)\n", current->pid, current->comm);
++
++	if (!us || !us->open)
++		return;
++
++	spin_lock_irqsave(&open_lock, flags);
++	if (tty_hung_up_p(filp)) {
++		spin_unlock_irqrestore(&open_lock, flags);
++		return;
++	}
++
++	if (--us->open < 0) {
++		us->open = 0;
++		printk(KERN_ERR "duart: bad open count: %d\n", us->open);
++	}
++	if (us->open) {
++		spin_unlock_irqrestore(&open_lock, flags);
++		return;
++	}
++
++	spin_unlock_irqrestore(&open_lock, flags);
++
++	tty->closing = 1;
++
++	/* Stop accepting input */
++	duart_mask_ints(us->line, M_DUART_IMR_RX);
++	/* Wait for FIFO to drain */
++	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT))
++		;
++
++	if (tty->driver->flush_buffer)
++		tty->driver->flush_buffer(tty);
++	if (tty->ldisc.flush_buffer)
++		tty->ldisc.flush_buffer(tty);
++	tty->closing = 0;
++}
++
++
++static struct tty_operations duart_ops = {
++        .open   = duart_open,
++        .close = duart_close,
++        .write = duart_write,
++        .put_char = duart_put_char,
++        .flush_chars = duart_flush_chars,
++        .write_room = duart_write_room,
++        .chars_in_buffer = duart_chars_in_buffer,
++        .flush_buffer = duart_flush_buffer,
++        .ioctl = duart_ioctl,
++//        .throttle = duart_throttle,
++//        .unthrottle = duart_unthrottle,
++        .set_termios = duart_set_termios,
++        .stop = duart_stop,
++        .start = duart_start,
++        .hangup = duart_hangup,
++	.wait_until_sent = duart_wait_until_sent,
++};
++
++/* Initialize the sb1250_duart_present array based on SOC type.  */
++static void __init sb1250_duart_init_present_lines(void)
++{
++	int i, max_lines;
++
++	/* Set the number of available units based on the SOC type.  */
++	switch (soc_type) {
++	case K_SYS_SOC_TYPE_BCM1x55:
++	case K_SYS_SOC_TYPE_BCM1x80:
++		max_lines = 4;
++		break;
++	default:
++		/* Assume at least two serial ports at the normal address.  */
++		max_lines = 2;
++		break;
++	}
++	if (max_lines > DUART_MAX_LINE)
++		max_lines = DUART_MAX_LINE;
++
++	for (i = 0; i < max_lines; i++)
++		sb1250_duart_present[i] = 1;
++}
++
++/* Set up the driver and register it, register the UART interrupts.  This
++   is called from tty_init, or as a part of the module init */
++static int __init sb1250_duart_init(void) 
++{
++	int i;
++
++	sb1250_duart_init_present_lines();
++
++	sb1250_duart_driver = alloc_tty_driver(DUART_MAX_LINE);
++	if (!sb1250_duart_driver)
++		return -ENOMEM;
++
++	sb1250_duart_driver->owner = THIS_MODULE;
++	sb1250_duart_driver->name = "duart";
++	sb1250_duart_driver->devfs_name = "duart/";
++	sb1250_duart_driver->major = TTY_MAJOR;
++	sb1250_duart_driver->minor_start = SB1250_DUART_MINOR_BASE;
++	sb1250_duart_driver->type            = TTY_DRIVER_TYPE_SERIAL;
++	sb1250_duart_driver->subtype         = SERIAL_TYPE_NORMAL;
++	sb1250_duart_driver->init_termios    = tty_std_termios;
++	sb1250_duart_driver->flags           = TTY_DRIVER_REAL_RAW;
++	tty_set_operations(sb1250_duart_driver, &duart_ops);
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		uart_state_t *port = uart_states + i;
++
++		if (!sb1250_duart_present[i])
++			continue;
++
++		init_duart_port(port, i);
++		spin_lock_init(&port->outp_lock);
++		duart_mask_ints(i, M_DUART_IMR_ALL);
++		if (request_irq(UNIT_INT(i), duart_int, 0, "uart", port)) {
++			panic("Couldn't get uart0 interrupt line");
++		}
++		__raw_writeq(M_DUART_RX_EN|M_DUART_TX_EN,
++			     IOADDR(UNIT_CHANREG(i, R_DUART_CMD)));
++		duart_set_cflag(i, DEFAULT_CFLAGS);
++	}
++
++	/* Interrupts are now active, our ISR can be called. */
++
++	if (tty_register_driver(sb1250_duart_driver)) {
++		printk(KERN_ERR "Couldn't register sb1250 duart serial driver\n");
++		put_tty_driver(sb1250_duart_driver);
++		return 1;
++	}
++	return 0;
++}
++
++/* Unload the driver.  Unregister stuff, get ready to go away */
++static void __exit sb1250_duart_fini(void)
++{
++	unsigned long flags;
++	int i;
++
++	local_irq_save(flags);
++	tty_unregister_driver(sb1250_duart_driver);
++	put_tty_driver(sb1250_duart_driver);
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		if (!sb1250_duart_present[i])
++			continue;
++		free_irq(UNIT_INT(i), &uart_states[i]);
++		disable_irq(UNIT_INT(i));
++	}
++	local_irq_restore(flags);
++}
++
++module_init(sb1250_duart_init);
++module_exit(sb1250_duart_fini);
++MODULE_DESCRIPTION("SB1250 Duart serial driver");
++MODULE_AUTHOR("Broadcom Corp.");
++
++#ifdef CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++
++/*
++ * Serial console stuff.  Very basic, polling driver for doing serial
++ * console output.  The console_sem is held by the caller, so we
++ * shouldn't be interrupted for more console activity.
++ * XXXKW What about getting interrupted by uart driver activity?
++ */
++
++void serial_outc(unsigned char c, int line)
++{
++	uart_state_t *port = uart_states + line;
++	while (!(READ_SERCSR(port->status, line) & M_DUART_TX_RDY)) ;
++	WRITE_SERCSR(c, port->tx_hold, line);
++	while (!(READ_SERCSR(port->status, port->line) & M_DUART_TX_EMT)) ;
++}
++
++static void ser_console_write(struct console *cons, const char *s,
++	unsigned int count)
++{
++	int line = cons->index;
++	uart_state_t *port = uart_states + line;
++	u32 imr;
++
++	imr = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(0, port->imr, line);
++	while (count--) {
++		if (*s == '\n')
++			serial_outc('\r', line);
++		serial_outc(*s++, line);
++    	}
++	WRITE_SERCSR(imr, port->imr, line);
++}
++
++static struct tty_driver *ser_console_device(struct console *c, int *index)
++{
++	*index = c->index;
++	return sb1250_duart_driver;
++}
++
++static int ser_console_setup(struct console *cons, char *str)
++{
++	int i;
++
++	sb1250_duart_init_present_lines();
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		uart_state_t *port = uart_states + i;
++
++		if (!sb1250_duart_present[i])
++			continue;
++
++		init_duart_port(port, i);
++#if SIBYTE_1956_WAR
++		last_mode1[i] = V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8;
++#endif
++		WRITE_SERCSR(V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8,
++			     port->mode_1, i);
++		WRITE_SERCSR(M_DUART_STOP_BIT_LEN_1,
++			     port->mode_2, i);
++		WRITE_SERCSR(V_DUART_BAUD_RATE(115200),
++			     port->clk_sel, i);
++		WRITE_SERCSR(M_DUART_RX_EN|M_DUART_TX_EN,
++			     port->cmd, i);
++	}
++	return 0;
++}
++
++static struct console sb1250_ser_cons = {
++	.name		= "duart",
++	.write		= ser_console_write,
++	.device		= ser_console_device,
++	.setup		= ser_console_setup,
++	.flags		= CON_PRINTBUFFER,
++	.index		= -1,
++};
++
++static int __init sb1250_serial_console_init(void)
++{
++	register_console(&sb1250_ser_cons);
++	return 0;
++}
++
++console_initcall(sb1250_serial_console_init);
++
++#endif /* CONFIG_SIBYTE_SB1250_DUART_CONSOLE */
+diff -Nur linux-2.6.17/include/linux/serial.h linux-2.6.17-owrt/include/linux/serial.h
+--- linux-2.6.17/include/linux/serial.h	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/include/linux/serial.h	2006-06-18 12:41:36.000000000 +0200
+@@ -76,7 +76,8 @@
+ #define PORT_16654	11
+ #define PORT_16850	12
+ #define PORT_RSA	13	/* RSA-DV II/S card */
+-#define PORT_MAX	13
++#define PORT_SB1250	14
++#define PORT_MAX	14
+ 
+ #define SERIAL_IO_PORT	0
+ #define SERIAL_IO_HUB6	1
diff --git a/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch b/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
new file mode 100644
index 0000000000..c80d4aea54
--- /dev/null
+++ b/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
@@ -0,0 +1,17 @@
+--- linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:16:18.000000000 -0700
++++ linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:15:22.000000000 -0700
+@@ -140,6 +140,14 @@
+ 		periph_rev = 3;
+ 		pass_str = "A2";
+ 		break;
++	case K_SYS_REVISION_BCM112x_A3:
++		periph_rev = 3;
++		pass_str = "A3";
++		break;
++	case K_SYS_REVISION_BCM112x_A4:
++		periph_rev = 3;
++		pass_str = "A4";
++		break;
+ 	default:
+ 		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ 		ret = 1;