resync with kamikaze

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3844 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 973 insertions, 0 deletions

diff --git a/target/linux/sibyte-2.6/patches/000-DUART.patch b/target/linux/sibyte-2.6/patches/000-DUART.patch
new file mode 100644
index 0000000000..480287ffa0
--- /dev/null
+++ b/target/linux/sibyte-2.6/patches/000-DUART.patch
@@ -0,0 +1,956 @@
+--- linux-2.6.16.7/drivers/char/Kconfig	2006-04-21 14:38:30.000000000 -0700
++++ linux-2.6.16.7/drivers/char/Kconfig	2006-04-21 14:39:29.000000000 -0700
+@@ -340,6 +340,14 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called istallion.
+ 
++config SIBYTE_SB1250_DUART
++	bool "Support for BCM1xxx onchip DUART"
++	depends on MIPS && SIBYTE_SB1xxx_SOC=y
++
++config SIBYTE_SB1250_DUART_CONSOLE
++	bool "Console on BCM1xxx DUART"
++	depends on SIBYTE_SB1250_DUART
++
+ config AU1000_UART
+ 	bool "Enable Au1000 UART Support"
+ 	depends on SERIAL_NONSTANDARD && MIPS
+diff -Nurb linux-2.6.16.7/drivers/char/Makefile linux-2.6.16.7/drivers/char/Makefile
+--- linux-2.6.16.7/drivers/char/Makefile	2006-04-17 14:53:25.000000000 -0700
++++ linux-2.6.16.7/drivers/char/Makefile	2006-04-28 12:14:24.000000000 -0700
+@@ -31,6 +31,7 @@
+ obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
+ obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
+ obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
+ obj-$(CONFIG_COMPUTONE)		+= ip2.o ip2main.o
+ obj-$(CONFIG_RISCOM8)		+= riscom8.o
+ obj-$(CONFIG_ISI)		+= isicom.o
+diff -Nurb linux-2.6.16.7/drivers/char/sb1250_duart.c linux-2.6.16.7/drivers/char/sb1250_duart.c
+--- linux-2.6.16.7/drivers/char/sb1250_duart.c	1969-12-31 16:00:00.000000000 -0800
++++ linux-2.6.16.7/drivers/char/sb1250_duart.c	2006-04-28 12:13:49.000000000 -0700
+@@ -0,0 +1,911 @@
++/*
++ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++/* 
++ * Driver support for the on-chip sb1250 dual-channel serial port,
++ * running in asynchronous mode.  Also, support for doing a serial console
++ * on one of those ports 
++ */
++#include <linux/config.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/console.h>
++#include <linux/kdev_t.h>
++#include <linux/major.h>
++#include <linux/termios.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/errno.h>
++#include <linux/tty.h>
++#include <linux/sched.h>
++#include <linux/tty_flip.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <asm/delay.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/sibyte/swarm.h>
++#include <asm/sibyte/sb1250.h>
++#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
++#include <asm/sibyte/bcm1480_regs.h>
++#include <asm/sibyte/bcm1480_int.h>
++#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
++#include <asm/sibyte/sb1250_regs.h>
++#include <asm/sibyte/sb1250_int.h>
++#else
++#error invalid SiByte UART configuation
++#endif
++#include <asm/sibyte/sb1250_uart.h>
++#include <asm/war.h>
++
++#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
++#define UNIT_CHANREG(n,reg)	A_BCM1480_DUART_CHANREG((n),(reg))
++#define UNIT_IMRREG(n)		A_BCM1480_DUART_IMRREG(n)
++#define UNIT_INT(n)		(K_BCM1480_INT_UART_0 + (n))
++#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
++#define UNIT_CHANREG(n,reg)	A_DUART_CHANREG((n),(reg))
++#define UNIT_IMRREG(n)		A_DUART_IMRREG(n)
++#define UNIT_INT(n)		(K_INT_UART_0 + (n))
++#else
++#error invalid SiByte UART configuation
++#endif
++
++/* Toggle spewing of debugging output */
++#undef DEBUG
++
++#define DEFAULT_CFLAGS          (CS8 | B115200)
++
++#define TX_INTEN          1
++#define DUART_INITIALIZED 2
++
++#define DUART_MAX_LINE 4
++char sb1250_duart_present[DUART_MAX_LINE];
++EXPORT_SYMBOL(sb1250_duart_present);
++
++/*
++ * Still not sure what the termios structures set up here are for, 
++ *  but we have to supply pointers to them to register the tty driver
++ */
++static struct tty_driver *sb1250_duart_driver; //, sb1250_duart_callout_driver;
++
++/*
++ * This lock protects both the open flags for all the uart states as 
++ * well as the reference count for the module
++ */
++static DEFINE_SPINLOCK(open_lock);
++
++typedef struct { 
++	unsigned char       outp_buf[SERIAL_XMIT_SIZE];
++	unsigned int        outp_head;
++	unsigned int        outp_tail;
++	unsigned int        outp_count;
++	spinlock_t          outp_lock;
++	unsigned int        open;
++	unsigned int        line;
++	unsigned int        last_cflags;
++	unsigned long       flags;
++	struct tty_struct   *tty;
++	/* CSR addresses */
++	volatile u32	    *status;
++	volatile u32	    *imr;
++	volatile u32	    *tx_hold;
++	volatile u32	    *rx_hold;
++	volatile u32	    *mode_1;
++	volatile u32	    *mode_2;
++	volatile u32	    *clk_sel;
++	volatile u32	    *cmd;
++} uart_state_t;
++
++static uart_state_t uart_states[DUART_MAX_LINE];
++
++/*
++ * Inline functions local to this module 
++ */
++
++/*
++ * In bug 1956, we get glitches that can mess up uart registers.  This
++ * "write-mode-1 after any register access" is the accepted
++ * workaround.
++ */
++#if SIBYTE_1956_WAR
++static unsigned int last_mode1[DUART_MAX_LINE];
++#endif
++
++static inline u32 READ_SERCSR(volatile u32 *addr, int line)
++{
++	u32 val = csr_in32(addr);
++#if SIBYTE_1956_WAR
++	csr_out32(last_mode1[line], uart_states[line].mode_1);
++#endif
++	return val;
++}
++
++static inline void WRITE_SERCSR(u32 val, volatile u32 *addr, int line)
++{
++	csr_out32(val, addr);
++#if SIBYTE_1956_WAR
++	csr_out32(last_mode1[line], uart_states[line].mode_1);
++#endif
++}
++
++static void init_duart_port(uart_state_t *port, int line)
++{
++	if (!(port->flags & DUART_INITIALIZED)) {
++		port->line = line;
++		port->status = IOADDR(UNIT_CHANREG(line, R_DUART_STATUS));
++		port->imr = IOADDR(UNIT_IMRREG(line));
++		port->tx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_TX_HOLD));
++		port->rx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_RX_HOLD));
++		port->mode_1 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_1));
++		port->mode_2 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_2));
++		port->clk_sel = IOADDR(UNIT_CHANREG(line, R_DUART_CLK_SEL));
++		port->cmd = IOADDR(UNIT_CHANREG(line, R_DUART_CMD));
++		port->flags |= DUART_INITIALIZED;
++	}
++}
++
++/*
++ * Mask out the passed interrupt lines at the duart level.  This should be
++ * called while holding the associated outp_lock.
++ */
++static inline void duart_mask_ints(unsigned int line, unsigned int mask)
++{
++	uart_state_t *port = uart_states + line;
++	u64 tmp = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(tmp & ~mask, port->imr, line);
++}
++
++	
++/* Unmask the passed interrupt lines at the duart level */
++static inline void duart_unmask_ints(unsigned int line, unsigned int mask)
++{
++	uart_state_t *port = uart_states + line;
++	u64 tmp = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(tmp | mask, port->imr, line);
++}
++
++static inline void transmit_char_pio(uart_state_t *us)
++{
++	struct tty_struct *tty = us->tty;
++	int blocked = 0;
++
++	if (spin_trylock(&us->outp_lock)) {
++		for (;;) {
++			if (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_RDY))
++				break;
++			if (us->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
++				break;
++			} else {
++				WRITE_SERCSR(us->outp_buf[us->outp_head],
++					     us->tx_hold, us->line);
++				us->outp_head = (us->outp_head + 1) & (SERIAL_XMIT_SIZE-1);
++				if (--us->outp_count <= 0)
++					break;
++			}
++			udelay(10);
++		}
++		spin_unlock(&us->outp_lock);
++	} else {
++		blocked = 1;
++	}
++
++	if (!us->outp_count || tty->stopped ||
++	    tty->hw_stopped || blocked) {
++		us->flags &= ~TX_INTEN;
++		duart_mask_ints(us->line, M_DUART_IMR_TX);
++	}
++
++      	if (us->open &&
++	    (us->outp_count < (SERIAL_XMIT_SIZE/2))) {
++		/*
++		 * We told the discipline at one point that we had no
++		 * space, so it went to sleep.  Wake it up when we hit
++		 * half empty
++		 */
++		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
++		    tty->ldisc.write_wakeup)
++			tty->ldisc.write_wakeup(tty);
++		wake_up_interruptible(&tty->write_wait);
++	}
++}
++
++/* 
++ * Generic interrupt handler for both channels.  dev_id is a pointer
++ * to the proper uart_states structure, so from that we can derive 
++ * which port interrupted 
++ */
++
++static irqreturn_t duart_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++	uart_state_t *us = (uart_state_t *)dev_id;
++	struct tty_struct *tty = us->tty;
++	unsigned int status = READ_SERCSR(us->status, us->line);
++
++	pr_debug("DUART INT\n");
++
++	if (status & M_DUART_RX_RDY) {
++		int counter = 2048;
++		unsigned int ch;
++
++		if (status & M_DUART_OVRUN_ERR)
++			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
++		if (status & M_DUART_PARITY_ERR) {
++			printk("Parity error!\n");
++		} else if (status & M_DUART_FRM_ERR) {
++			printk("Frame error!\n");
++		}
++
++		while (counter > 0) {
++			if (!(READ_SERCSR(us->status, us->line) & M_DUART_RX_RDY))
++				break;
++			ch = READ_SERCSR(us->rx_hold, us->line);
++			tty_insert_flip_char(tty, ch, 0);
++			udelay(1);
++			counter--;
++		}
++		tty_flip_buffer_push(tty);
++	}
++
++	if (status & M_DUART_TX_RDY) {
++		transmit_char_pio(us);
++	}
++
++	return IRQ_HANDLED;
++}
++
++/*
++ *  Actual driver functions
++ */
++
++/* Return the number of characters we can accomodate in a write at this instant */
++static int duart_write_room(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	int retval;
++
++	retval = SERIAL_XMIT_SIZE - us->outp_count;
++
++	pr_debug("duart_write_room called, returning %i\n", retval);
++
++	return retval;
++}
++
++/* memcpy the data from src to destination, but take extra care if the
++   data is coming from user space */
++static inline int copy_buf(char *dest, const char *src, int size, int from_user) 
++{
++	if (from_user) {
++		(void) copy_from_user(dest, src, size); 
++	} else {
++		memcpy(dest, src, size);
++	}
++	return size;
++}
++
++/*
++ * Buffer up to count characters from buf to be written.  If we don't have
++ * other characters buffered, enable the tx interrupt to start sending
++ */
++static int duart_write(struct tty_struct *tty, const unsigned char *buf,
++		       int count)
++{
++	uart_state_t *us;
++	int c, t, total = 0;
++	unsigned long flags;
++
++	if (!tty) return 0;
++
++	us = tty->driver_data;
++	if (!us) return 0;
++
++	pr_debug("duart_write called for %i chars by %i (%s)\n", count, current->pid, current->comm);
++
++	spin_lock_irqsave(&us->outp_lock, flags);
++
++	for (;;) {
++		c = count;
++
++		t = SERIAL_XMIT_SIZE - us->outp_tail;
++		if (t < c) c = t;
++
++		t = SERIAL_XMIT_SIZE - 1 - us->outp_count;
++		if (t < c) c = t;
++
++		if (c <= 0) break;
++
++		memcpy(us->outp_buf + us->outp_tail, buf, c);
++
++		us->outp_count += c;
++		us->outp_tail = (us->outp_tail + c) & (SERIAL_XMIT_SIZE - 1);
++		buf += c;
++		count -= c;
++		total += c;
++	}
++
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++
++	if (us->outp_count && !tty->stopped && 
++	    !tty->hw_stopped && !(us->flags & TX_INTEN)) {
++		us->flags |= TX_INTEN;
++		duart_unmask_ints(us->line, M_DUART_IMR_TX);
++	}
++
++	return total;
++}
++
++
++/* Buffer one character to be written.  If there's not room for it, just drop
++   it on the floor.  This is used for echo, among other things */
++static void duart_put_char(struct tty_struct *tty, u_char ch)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_put_char called.  Char is %x (%c)\n", (int)ch, ch);
++
++	spin_lock_irqsave(&us->outp_lock, flags);
++
++	if (us->outp_count == SERIAL_XMIT_SIZE) {
++		spin_unlock_irqrestore(&us->outp_lock, flags);
++		return;
++	}
++
++	us->outp_buf[us->outp_tail] = ch;
++	us->outp_tail = (us->outp_tail + 1) &(SERIAL_XMIT_SIZE-1);
++	us->outp_count++;
++
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++}
++
++static void duart_flush_chars(struct tty_struct * tty)
++{
++	uart_state_t *port;
++
++	if (!tty) return;
++
++	port = tty->driver_data;
++
++	if (!port) return;
++
++	if (port->outp_count <= 0 || tty->stopped || tty->hw_stopped) {
++		return;
++	}
++
++	port->flags |= TX_INTEN;
++	duart_unmask_ints(port->line, M_DUART_IMR_TX);
++}
++
++/* Return the number of characters in the output buffer that have yet to be 
++   written */
++static int duart_chars_in_buffer(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	int retval;
++
++	retval = us->outp_count;
++
++	pr_debug("duart_chars_in_buffer returning %i\n", retval);
++
++	return retval;
++}
++
++/* Kill everything we haven't yet shoved into the FIFO.  Turn off the
++   transmit interrupt since we've nothing more to transmit */
++static void duart_flush_buffer(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_flush_buffer called\n");
++	spin_lock_irqsave(&us->outp_lock, flags);
++	us->outp_head = us->outp_tail = us->outp_count = 0;
++	spin_unlock_irqrestore(&us->outp_lock, flags);
++
++	wake_up_interruptible(&us->tty->write_wait);
++	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
++	    tty->ldisc.write_wakeup)
++		tty->ldisc.write_wakeup(tty);
++}
++
++
++/* See sb1250 user manual for details on these registers */
++static inline void duart_set_cflag(unsigned int line, unsigned int cflag)
++{
++	unsigned int mode_reg1 = 0, mode_reg2 = 0;
++	unsigned int clk_divisor;
++	uart_state_t *port = uart_states + line;
++
++	switch (cflag & CSIZE) {
++	case CS7:
++		mode_reg1 |= V_DUART_BITS_PER_CHAR_7;
++		
++	default:
++		/* We don't handle CS5 or CS6...is there a way we're supposed to flag this? 
++		   right now we just force them to CS8 */
++		mode_reg1 |= 0x0;
++		break;
++	}
++	if (cflag & CSTOPB) {
++	        mode_reg2 |= M_DUART_STOP_BIT_LEN_2;
++	}
++	if (!(cflag & PARENB)) {
++	        mode_reg1 |= V_DUART_PARITY_MODE_NONE;
++	}
++	if (cflag & PARODD) {
++		mode_reg1 |= M_DUART_PARITY_TYPE_ODD;
++	}
++	
++	/* Formula for this is (5000000/baud)-1, but we saturate
++	   at 12 bits, which means we can't actually do anything less
++	   that 1200 baud */
++	switch (cflag & CBAUD) {
++	case B200:	
++	case B300:	
++	case B1200:	clk_divisor = 4095;		break;
++	case B1800:	clk_divisor = 2776;		break;
++	case B2400:	clk_divisor = 2082;		break;
++	case B4800:	clk_divisor = 1040;		break;
++	default:
++	case B9600:	clk_divisor = 519;		break;
++	case B19200:	clk_divisor = 259;		break;
++	case B38400:	clk_divisor = 129;		break;
++	case B57600:	clk_divisor = 85;		break;
++	case B115200:	clk_divisor = 42;		break;
++	}
++	WRITE_SERCSR(mode_reg1, port->mode_1, port->line);
++	WRITE_SERCSR(mode_reg2, port->mode_2, port->line);
++	WRITE_SERCSR(clk_divisor, port->clk_sel, port->line);
++	port->last_cflags = cflag;
++}
++
++
++/* Handle notification of a termios change.  */
++static void duart_set_termios(struct tty_struct *tty, struct termios *old)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_set_termios called by %i (%s)\n", current->pid, current->comm);
++	if (old && tty->termios->c_cflag == old->c_cflag)
++		return;
++	duart_set_cflag(us->line, tty->termios->c_cflag);
++}
++
++static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) {
++
++	struct serial_struct tmp;
++
++	memset(&tmp, 0, sizeof(tmp));
++
++	tmp.type=PORT_SB1250;
++	tmp.line=us->line;
++	tmp.port=UNIT_CHANREG(tmp.line,0);
++	tmp.irq=UNIT_INT(tmp.line);
++	tmp.xmit_fifo_size=16; /* fixed by hw */
++	tmp.baud_base=5000000;
++	tmp.io_type=SERIAL_IO_MEM;
++
++	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
++		return -EFAULT;
++
++	return 0;
++}
++
++static int duart_ioctl(struct tty_struct *tty, struct file * file,
++		       unsigned int cmd, unsigned long arg)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++/*	if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
++	return -ENODEV;*/
++	switch (cmd) {
++	case TIOCMGET:
++		printk("Ignoring TIOCMGET\n");
++		break;
++	case TIOCMBIS:
++		printk("Ignoring TIOCMBIS\n");
++		break;
++	case TIOCMBIC:
++		printk("Ignoring TIOCMBIC\n");
++		break;
++	case TIOCMSET:
++		printk("Ignoring TIOCMSET\n");
++		break;
++	case TIOCGSERIAL:
++		return get_serial_info(us,(struct serial_struct *) arg);
++	case TIOCSSERIAL:
++		printk("Ignoring TIOCSSERIAL\n");
++		break;
++	case TIOCSERCONFIG:
++		printk("Ignoring TIOCSERCONFIG\n");
++		break;
++	case TIOCSERGETLSR: /* Get line status register */
++		printk("Ignoring TIOCSERGETLSR\n");
++		break;
++	case TIOCSERGSTRUCT:
++		printk("Ignoring TIOCSERGSTRUCT\n");
++		break;
++	case TIOCMIWAIT:
++		printk("Ignoring TIOCMIWAIT\n");
++		break;
++	case TIOCGICOUNT:
++		printk("Ignoring TIOCGICOUNT\n");
++		break;
++	case TIOCSERGWILD:
++		printk("Ignoring TIOCSERGWILD\n");
++		break;
++	case TIOCSERSWILD:
++		printk("Ignoring TIOCSERSWILD\n");
++		break;
++	default:
++		break;
++	}
++//	printk("Ignoring IOCTL %x from pid %i (%s)\n", cmd, current->pid, current->comm);
++	return -ENOIOCTLCMD;
++}
++
++/* XXXKW locking? */
++static void duart_start(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_start called\n");
++
++	if (us->outp_count && !(us->flags & TX_INTEN)) {
++		us->flags |= TX_INTEN;
++		duart_unmask_ints(us->line, M_DUART_IMR_TX);
++	}
++}
++
++/* XXXKW locking? */
++static void duart_stop(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	pr_debug("duart_stop called\n");
++
++	if (us->outp_count && (us->flags & TX_INTEN)) {
++		us->flags &= ~TX_INTEN;
++		duart_mask_ints(us->line, M_DUART_IMR_TX);
++	}
++}
++
++/* Not sure on the semantics of this; are we supposed to wait until the stuff
++   already in the hardware FIFO drains, or are we supposed to wait until 
++   we've drained the output buffer, too?  I'm assuming the former, 'cause thats
++   what the other drivers seem to assume 
++*/
++
++static void duart_wait_until_sent(struct tty_struct *tty, int timeout)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long orig_jiffies;
++
++	orig_jiffies = jiffies;
++	pr_debug("duart_wait_until_sent(%d)+\n", timeout);
++	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT)) {
++		set_current_state(TASK_INTERRUPTIBLE);
++	 	schedule_timeout(1);
++		if (signal_pending(current))
++			break;
++		if (timeout && time_after(jiffies, orig_jiffies + timeout))
++			break;
++	}
++	pr_debug("duart_wait_until_sent()-\n");
++}
++
++/*
++ * duart_hangup() --- called by tty_hangup() when a hangup is signaled.
++ */
++static void duart_hangup(struct tty_struct *tty)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++
++	duart_flush_buffer(tty);
++	us->open = 0;
++	us->tty = 0;
++}
++
++/*
++ * Open a tty line.  Note that this can be called multiple times, so ->open can
++ * be >1.  Only set up the tty struct if this is a "new" open, e.g. ->open was
++ * zero
++ */
++static int duart_open(struct tty_struct *tty, struct file *filp)
++{
++	uart_state_t *us;
++	unsigned int line = tty->index;
++	unsigned long flags;
++
++	if ((line >= tty->driver->num) || !sb1250_duart_present[line])
++		return -ENODEV;
++
++	pr_debug("duart_open called by %i (%s), tty is %p, rw is %p, ww is %p\n",
++	       current->pid, current->comm, tty, tty->read_wait,
++	       tty->write_wait);
++
++	us = uart_states + line;
++	tty->driver_data = us;
++
++	spin_lock_irqsave(&open_lock, flags);
++	if (!us->open) {
++		us->tty = tty;
++		us->tty->termios->c_cflag = us->last_cflags;
++	}
++	us->open++;
++	us->flags &= ~TX_INTEN;
++	duart_unmask_ints(line, M_DUART_IMR_RX);
++	spin_unlock_irqrestore(&open_lock, flags);
++
++	return 0;
++}
++
++
++/*
++ * Close a reference count out.  If reference count hits zero, null the
++ * tty, kill the interrupts.  The tty_io driver is responsible for making
++ * sure we've cleared out our internal buffers before calling close()
++ */
++static void duart_close(struct tty_struct *tty, struct file *filp)
++{
++	uart_state_t *us = (uart_state_t *) tty->driver_data;
++	unsigned long flags;
++
++	pr_debug("duart_close called by %i (%s)\n", current->pid, current->comm);
++
++	if (!us || !us->open)
++		return;
++
++	spin_lock_irqsave(&open_lock, flags);
++	if (tty_hung_up_p(filp)) {
++		spin_unlock_irqrestore(&open_lock, flags);
++		return;
++	}
++
++	if (--us->open < 0) {
++		us->open = 0;
++		printk(KERN_ERR "duart: bad open count: %d\n", us->open);
++	}
++	if (us->open) {
++		spin_unlock_irqrestore(&open_lock, flags);
++		return;
++	}
++
++	spin_unlock_irqrestore(&open_lock, flags);
++
++	tty->closing = 1;
++
++	/* Stop accepting input */
++	duart_mask_ints(us->line, M_DUART_IMR_RX);
++	/* Wait for FIFO to drain */
++	while (!(READ_SERCSR(us->status, us->line) & M_DUART_TX_EMT))
++		;
++
++	if (tty->driver->flush_buffer)
++		tty->driver->flush_buffer(tty);
++	if (tty->ldisc.flush_buffer)
++		tty->ldisc.flush_buffer(tty);
++	tty->closing = 0;
++}
++
++
++static struct tty_operations duart_ops = {
++        .open   = duart_open,
++        .close = duart_close,
++        .write = duart_write,
++        .put_char = duart_put_char,
++        .flush_chars = duart_flush_chars,
++        .write_room = duart_write_room,
++        .chars_in_buffer = duart_chars_in_buffer,
++        .flush_buffer = duart_flush_buffer,
++        .ioctl = duart_ioctl,
++//        .throttle = duart_throttle,
++//        .unthrottle = duart_unthrottle,
++        .set_termios = duart_set_termios,
++        .stop = duart_stop,
++        .start = duart_start,
++        .hangup = duart_hangup,
++	.wait_until_sent = duart_wait_until_sent,
++};
++
++/* Initialize the sb1250_duart_present array based on SOC type.  */
++static void __init sb1250_duart_init_present_lines(void)
++{
++	int i, max_lines;
++
++	/* Set the number of available units based on the SOC type.  */
++	switch (soc_type) {
++	case K_SYS_SOC_TYPE_BCM1x55:
++	case K_SYS_SOC_TYPE_BCM1x80:
++		max_lines = 4;
++		break;
++	default:
++		/* Assume at least two serial ports at the normal address.  */
++		max_lines = 2;
++		break;
++	}
++	if (max_lines > DUART_MAX_LINE)
++		max_lines = DUART_MAX_LINE;
++
++	for (i = 0; i < max_lines; i++)
++		sb1250_duart_present[i] = 1;
++}
++
++/* Set up the driver and register it, register the UART interrupts.  This
++   is called from tty_init, or as a part of the module init */
++static int __init sb1250_duart_init(void) 
++{
++	int i;
++
++	sb1250_duart_init_present_lines();
++
++	sb1250_duart_driver = alloc_tty_driver(DUART_MAX_LINE);
++	if (!sb1250_duart_driver)
++		return -ENOMEM;
++
++	sb1250_duart_driver->owner = THIS_MODULE;
++	sb1250_duart_driver->name = "duart";
++	sb1250_duart_driver->devfs_name = "duart/";
++	sb1250_duart_driver->major = TTY_MAJOR;
++	sb1250_duart_driver->minor_start = SB1250_DUART_MINOR_BASE;
++	sb1250_duart_driver->type            = TTY_DRIVER_TYPE_SERIAL;
++	sb1250_duart_driver->subtype         = SERIAL_TYPE_NORMAL;
++	sb1250_duart_driver->init_termios    = tty_std_termios;
++	sb1250_duart_driver->flags           = TTY_DRIVER_REAL_RAW;
++	tty_set_operations(sb1250_duart_driver, &duart_ops);
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		uart_state_t *port = uart_states + i;
++
++		if (!sb1250_duart_present[i])
++			continue;
++
++		init_duart_port(port, i);
++		spin_lock_init(&port->outp_lock);
++		duart_mask_ints(i, M_DUART_IMR_ALL);
++		if (request_irq(UNIT_INT(i), duart_int, 0, "uart", port)) {
++			panic("Couldn't get uart0 interrupt line");
++		}
++		__raw_writeq(M_DUART_RX_EN|M_DUART_TX_EN,
++			     IOADDR(UNIT_CHANREG(i, R_DUART_CMD)));
++		duart_set_cflag(i, DEFAULT_CFLAGS);
++	}
++
++	/* Interrupts are now active, our ISR can be called. */
++
++	if (tty_register_driver(sb1250_duart_driver)) {
++		printk(KERN_ERR "Couldn't register sb1250 duart serial driver\n");
++		put_tty_driver(sb1250_duart_driver);
++		return 1;
++	}
++	return 0;
++}
++
++/* Unload the driver.  Unregister stuff, get ready to go away */
++static void __exit sb1250_duart_fini(void)
++{
++	unsigned long flags;
++	int i;
++
++	local_irq_save(flags);
++	tty_unregister_driver(sb1250_duart_driver);
++	put_tty_driver(sb1250_duart_driver);
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		if (!sb1250_duart_present[i])
++			continue;
++		free_irq(UNIT_INT(i), &uart_states[i]);
++		disable_irq(UNIT_INT(i));
++	}
++	local_irq_restore(flags);
++}
++
++module_init(sb1250_duart_init);
++module_exit(sb1250_duart_fini);
++MODULE_DESCRIPTION("SB1250 Duart serial driver");
++MODULE_AUTHOR("Broadcom Corp.");
++
++#ifdef CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++
++/*
++ * Serial console stuff.  Very basic, polling driver for doing serial
++ * console output.  The console_sem is held by the caller, so we
++ * shouldn't be interrupted for more console activity.
++ * XXXKW What about getting interrupted by uart driver activity?
++ */
++
++void serial_outc(unsigned char c, int line)
++{
++	uart_state_t *port = uart_states + line;
++	while (!(READ_SERCSR(port->status, line) & M_DUART_TX_RDY)) ;
++	WRITE_SERCSR(c, port->tx_hold, line);
++	while (!(READ_SERCSR(port->status, port->line) & M_DUART_TX_EMT)) ;
++}
++
++static void ser_console_write(struct console *cons, const char *s,
++	unsigned int count)
++{
++	int line = cons->index;
++	uart_state_t *port = uart_states + line;
++	u32 imr;
++
++	imr = READ_SERCSR(port->imr, line);
++	WRITE_SERCSR(0, port->imr, line);
++	while (count--) {
++		if (*s == '\n')
++			serial_outc('\r', line);
++		serial_outc(*s++, line);
++    	}
++	WRITE_SERCSR(imr, port->imr, line);
++}
++
++static struct tty_driver *ser_console_device(struct console *c, int *index)
++{
++	*index = c->index;
++	return sb1250_duart_driver;
++}
++
++static int ser_console_setup(struct console *cons, char *str)
++{
++	int i;
++
++	sb1250_duart_init_present_lines();
++
++	for (i=0; i<DUART_MAX_LINE; i++) {
++		uart_state_t *port = uart_states + i;
++
++		if (!sb1250_duart_present[i])
++			continue;
++
++		init_duart_port(port, i);
++#if SIBYTE_1956_WAR
++		last_mode1[i] = V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8;
++#endif
++		WRITE_SERCSR(V_DUART_PARITY_MODE_NONE|V_DUART_BITS_PER_CHAR_8,
++			     port->mode_1, i);
++		WRITE_SERCSR(M_DUART_STOP_BIT_LEN_1,
++			     port->mode_2, i);
++		WRITE_SERCSR(V_DUART_BAUD_RATE(115200),
++			     port->clk_sel, i);
++		WRITE_SERCSR(M_DUART_RX_EN|M_DUART_TX_EN,
++			     port->cmd, i);
++	}
++	return 0;
++}
++
++static struct console sb1250_ser_cons = {
++	.name		= "duart",
++	.write		= ser_console_write,
++	.device		= ser_console_device,
++	.setup		= ser_console_setup,
++	.flags		= CON_PRINTBUFFER,
++	.index		= -1,
++};
++
++static int __init sb1250_serial_console_init(void)
++{
++	register_console(&sb1250_ser_cons);
++	return 0;
++}
++
++console_initcall(sb1250_serial_console_init);
++
++#endif /* CONFIG_SIBYTE_SB1250_DUART_CONSOLE */
+diff -Nurb linux-2.6.16.7/include/linux/serial.h linux-2.6.16.7/include/linux/serial.h
+--- linux-2.6.16.7/include/linux/serial.h	2006-04-17 14:53:25.000000000 -0700
++++ linux-2.6.16.7/include/linux/serial.h	2006-04-28 12:25:19.000000000 -0700
+@@ -76,7 +76,8 @@
+ #define PORT_16654	11
+ #define PORT_16850	12
+ #define PORT_RSA	13	/* RSA-DV II/S card */
+-#define PORT_MAX	13
++#define PORT_SB1250	14
++#define PORT_MAX	14
+ 
+ #define SERIAL_IO_PORT	0
+ #define SERIAL_IO_HUB6	1
diff --git a/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch b/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
new file mode 100644
index 0000000000..c80d4aea54
--- /dev/null
+++ b/target/linux/sibyte-2.6/patches/001-bcm112x_ax.patch
@@ -0,0 +1,17 @@
+--- linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:16:18.000000000 -0700
++++ linux-2.6.16.4/arch/mips/sibyte/sb1250/setup.c	2006-04-21 16:15:22.000000000 -0700
+@@ -140,6 +140,14 @@
+ 		periph_rev = 3;
+ 		pass_str = "A2";
+ 		break;
++	case K_SYS_REVISION_BCM112x_A3:
++		periph_rev = 3;
++		pass_str = "A3";
++		break;
++	case K_SYS_REVISION_BCM112x_A4:
++		periph_rev = 3;
++		pass_str = "A4";
++		break;
+ 	default:
+ 		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ 		ret = 1;