change prefix for kernelpatchbase 2.6.26

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 497 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1117--neo-Every-access-to-GPIO-bank-B-has-to-go-through.patch b/target/linux/s3c24xx/patches-2.6.26/1117--neo-Every-access-to-GPIO-bank-B-has-to-go-through.patch
new file mode 100755
index 0000000000..8754eabcf5
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.26/1117--neo-Every-access-to-GPIO-bank-B-has-to-go-through.patch
@@ -0,0 +1,497 @@
+From 81bf1ac05c1ba0d32db8fe8fb0cd52cb6b7d8e7e Mon Sep 17 00:00:00 2001
+From: Holger Freyther <zecke@openmoko.org>
+Date: Fri, 25 Jul 2008 23:06:05 +0100
+Subject: [PATCH] [neo] Every access to GPIO bank B has to go through the shadow code
+
+    - Any setting of any PIN on bank B will undo the LED setting.
+      Introduce neo1973_gpb_set_pin to set the PIN in a way not losing
+      the LED or any other shadowed setting.
+    - Update users of GPBXY for gta01 and gta02.
+
+Signed-Off-By: Holger Freyther <zecke@openmoko.org>
+---
+ arch/arm/mach-s3c2410/mach-gta01.c     |    9 ++--
+ arch/arm/mach-s3c2440/mach-gta02.c     |   10 ++--
+ arch/arm/plat-s3c24xx/Makefile         |    4 +-
+ arch/arm/plat-s3c24xx/neo1973_pm_bt.c  |   15 +++---
+ arch/arm/plat-s3c24xx/neo1973_pm_gps.c |    5 ++-
+ arch/arm/plat-s3c24xx/neo1973_pm_gsm.c |    9 ++--
+ arch/arm/plat-s3c24xx/neo1973_shadow.c |   86 ++++++++++++++++++++++++++++++++
+ drivers/leds/leds-neo1973-gta02.c      |   12 ++--
+ drivers/leds/leds-neo1973-vibrator.c   |    7 ++-
+ drivers/video/backlight/gta01_bl.c     |    9 ++--
+ include/asm-arm/plat-s3c24xx/neo1973.h |   33 ++++++++++++
+ 11 files changed, 165 insertions(+), 34 deletions(-)
+ create mode 100644 arch/arm/plat-s3c24xx/neo1973_shadow.c
+ create mode 100644 include/asm-arm/plat-s3c24xx/neo1973.h
+
+diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c
+index 8c1a402..a4384b6 100644
+--- a/arch/arm/mach-s3c2410/mach-gta01.c
++++ b/arch/arm/mach-s3c2410/mach-gta01.c
+@@ -72,6 +72,7 @@
+ #include <asm/plat-s3c24xx/cpu.h>
+ #include <asm/plat-s3c24xx/pm.h>
+ #include <asm/plat-s3c24xx/udc.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ static struct map_desc gta01_iodesc[] __initdata = {
+ 	{
+@@ -416,10 +417,10 @@ static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd)
+ 	case GTA01Bv4_SYSTEM_REV:
+ 		switch (power_mode) {
+ 		case MMC_POWER_OFF:
+-			s3c2410_gpio_setpin(GTA01_GPIO_SDMMC_ON, 1);
++			neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 1);
+ 			break;
+ 		case MMC_POWER_ON:
+-			s3c2410_gpio_setpin(GTA01_GPIO_SDMMC_ON, 0);
++			neo1973_gpb_setpin(GTA01_GPIO_SDMMC_ON, 0);
+ 			break;
+ 		}
+ 		break;
+@@ -442,10 +443,10 @@ static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd)
+ 
+ 	switch (cmd) {
+ 	case S3C2410_UDC_P_ENABLE:
+-		s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 1);
++		neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 1);
+ 		break;
+ 	case S3C2410_UDC_P_DISABLE:
+-		s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 0);
++		neo1973_gpb_setpin(GTA01_GPIO_USB_PULLUP, 0);
+ 		break;
+ 	default:
+ 		break;
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index f9e00d5..27babc9 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -75,6 +75,7 @@
+ #include <asm/plat-s3c24xx/cpu.h>
+ #include <asm/plat-s3c24xx/pm.h>
+ #include <asm/plat-s3c24xx/udc.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ #include <linux/jbt6k74.h>
+ 
+ #include <linux/glamofb.h>
+@@ -127,11 +128,11 @@ FIQ_HANDLER_ENTRY(256, 512)
+ 
+ 	if (fiq_ipc.vib_pwm_latched || fiq_ipc.vib_pwm) { /* not idle */
+ 		if (((u8)_fiq_count_fiqs) == fiq_ipc.vib_pwm_latched)
+-			s3c2410_gpio_setpin(fiq_ipc.vib_gpio_pin, 0);
++			neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 0);
+ 		if (((u8)_fiq_count_fiqs) == 0) {
+ 			fiq_ipc.vib_pwm_latched = fiq_ipc.vib_pwm;
+ 			if (fiq_ipc.vib_pwm_latched)
+-				s3c2410_gpio_setpin(fiq_ipc.vib_gpio_pin, 1);
++				neo1973_gpb_setpin(fiq_ipc.vib_gpio_pin, 1);
+ 		}
+ 		divisor = FIQ_DIVISOR_VIBRATOR;
+ 	}
+@@ -319,6 +320,7 @@ FIQ_HANDLER_ENTRY(256, 512)
+ FIQ_HANDLER_END()
+ 
+ 
++
+ /**
+  * returns PCB revision information in b9,b8 and b2,b1,b0
+  * Pre-GTA02 A6 returns 0x000
+@@ -763,10 +765,10 @@ static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+ 
+ 	switch (cmd) {
+ 	case S3C2410_UDC_P_ENABLE:
+-		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
++		neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
+ 		break;
+ 	case S3C2410_UDC_P_DISABLE:
+-		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
++		neo1973_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
+ 		break;
+ 	case S3C2410_UDC_P_RESET:
+ 		/* FIXME! */
+diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
+index 6b32a8a..c173f7b 100644
+--- a/arch/arm/plat-s3c24xx/Makefile
++++ b/arch/arm/plat-s3c24xx/Makefile
+@@ -33,4 +33,6 @@ obj-$(CONFIG_MACH_NEO1973)	+= neo1973_version.o \
+ 				   neo1973_pm_host.o \
+ 				   neo1973_pm_gsm.o \
+ 				   neo1973_pm_gps.o \
+-				   neo1973_pm_bt.o
++				   neo1973_pm_bt.o  \
++				   neo1973_shadow.o
++
+diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
+index a9694b4..dfc9ae8 100644
+--- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
++++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
+@@ -18,6 +18,7 @@
+ 
+ #include <asm/hardware.h>
+ #include <asm/mach-types.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+ #include <asm/arch/gta01.h>
+@@ -95,20 +96,20 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+ 			/* if we are powering up, assert reset, then power,
+ 			 * then release reset */
+ 			if (on) {
+-				s3c2410_gpio_setpin(GTA01_GPIO_BT_EN, 0);
++				neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
+ 				pcf50606_voltage_set(pcf50606_global,
+ 						     PCF50606_REGULATOR_D1REG,
+ 						     3100);
+ 			}
+ 			pcf50606_onoff_set(pcf50606_global,
+ 					   PCF50606_REGULATOR_D1REG, on);
+-			s3c2410_gpio_setpin(GTA01_GPIO_BT_EN, on);
++			neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on);
+ 			break;
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+ 		case MACH_TYPE_NEO1973_GTA02:
+-			s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
++			neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+ 			if (on)
+ 				pcf50633_voltage_set(pcf50633_global,
+ 					PCF50633_REGULATOR_LDO4, 3200);
+@@ -127,13 +128,13 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+ 		case MACH_TYPE_NEO1973_GTA01:
+-			s3c2410_gpio_setpin(GTA01_GPIO_BT_EN, on ? 0 : 1);
++			neo1973_gpb_setpin(GTA01_GPIO_BT_EN, on ? 0 : 1);
+ 			break;
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+ 		case MACH_TYPE_NEO1973_GTA02:
+-			s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
++			neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+ 			break;
+ #endif /* CONFIG_MACH_NEO1973_GTA02 */
+ 
+@@ -192,7 +193,7 @@ static int __init gta01_bt_probe(struct platform_device *pdev)
+ 				   PCF50606_REGULATOR_D1REG, 0);
+ 		/* we pull reset to low to make sure that the chip doesn't
+ 	 	 * drain power through the reset line */
+-		s3c2410_gpio_setpin(GTA01_GPIO_BT_EN, 0);
++		neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
+ 		break;
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+@@ -203,7 +204,7 @@ static int __init gta01_bt_probe(struct platform_device *pdev)
+ 				     PCF50633_REGULATOR_LDO4, 0);
+ 		/* we pull reset to low to make sure that the chip doesn't
+ 	 	 * drain power through the reset line */
+-		s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
++		neo1973_gpb_setpin(GTA02_GPIO_BT_EN, 0);
+ 		break;
+ #endif /* CONFIG_MACH_NEO1973_GTA02 */
+ 
+diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
+index d882f7b..d020f8d 100644
+--- a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
++++ b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
+@@ -20,6 +20,9 @@
+ #include <asm/hardware.h>
+ 
+ #include <asm/mach-types.h>
++
++#include <asm/plat-s3c24xx/neo1973.h>
++
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+ #include <asm/arch/gta01.h>
+ #include <linux/pcf50606.h>
+@@ -264,7 +267,7 @@ static void gps_pwron_set(int on)
+ {
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+ 	if (machine_is_neo1973_gta01())
+-		s3c2410_gpio_setpin(GTA01_GPIO_GPS_PWRON, on);
++		neo1973_gpb_setpin(GTA01_GPIO_GPS_PWRON, on);
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
+index 5ad942e..149b866 100644
+--- a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
++++ b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
+@@ -22,6 +22,7 @@
+ #include <asm/gpio.h>
+ #include <asm/mach-types.h>
+ #include <asm/arch/gta01.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+ #include <asm/arch/gta02.h>
+@@ -109,9 +110,9 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+ #endif
+ 			}
+ 
+-			s3c2410_gpio_setpin(GTA01_GPIO_MODEM_ON, 1);
++			neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 1);
+ 		} else {
+-			s3c2410_gpio_setpin(GTA01_GPIO_MODEM_ON, 0);
++			neo1973_gpb_setpin(GTA01_GPIO_MODEM_ON, 0);
+ 
+ 			switch (system_rev) {
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+@@ -138,9 +139,9 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+ 		}
+ 	} else if (!strcmp(attr->attr.name, "reset")) {
+ 		if (machine_is_neo1973_gta01())
+-			s3c2410_gpio_setpin(GTA01_GPIO_MODEM_RST, on);
++			neo1973_gpb_setpin(GTA01_GPIO_MODEM_RST, on);
+ 		else if (machine_is_neo1973_gta02())
+-			s3c2410_gpio_setpin(GTA02_GPIO_MODEM_RST, on);
++			neo1973_gpb_setpin(GTA02_GPIO_MODEM_RST, on);
+ 	} else if (!strcmp(attr->attr.name, "download")) {
+ 		if (machine_is_neo1973_gta01())
+ 			s3c2410_gpio_setpin(GTA01_GPIO_MODEM_DNLOAD, on);
+diff --git a/arch/arm/plat-s3c24xx/neo1973_shadow.c b/arch/arm/plat-s3c24xx/neo1973_shadow.c
+new file mode 100644
+index 0000000..09667da
+--- /dev/null
++++ b/arch/arm/plat-s3c24xx/neo1973_shadow.c
+@@ -0,0 +1,86 @@
++/*
++ * include/asm-arm/plat-s3c24xx/neo1973.h
++ *
++ * Common utility code for GTA01 and GTA02
++ *
++ * Copyright (C) 2008 by Openmoko, Inc.
++ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/io.h>
++#include <linux/irq.h>
++
++#include <asm/gpio.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++
++/**
++ * Shadow GPIO bank B handling. For the LEDs we need to keep track of the state
++ * in software. The s3c2410_gpio_setpin must not be used for GPIOs on bank B
++ */
++static unsigned long gpb_mask;
++static unsigned long gpb_state;
++
++void neo1973_gpb_add_shadow_gpio(unsigned int gpio)
++{
++	unsigned long offset = S3C2410_GPIO_OFFSET(gpio);
++	unsigned long flags;
++
++	local_irq_save(flags);
++	gpb_mask |= 1L << offset;
++	local_irq_restore(flags);
++}
++EXPORT_SYMBOL(neo1973_gpb_add_shadow_gpio);
++
++static void set_shadow_gpio(unsigned long offset, unsigned int value)
++{
++	unsigned long state = value != 0;
++
++	gpb_state &= ~(1L << offset);
++	gpb_state |= state << offset;
++}
++
++void neo1973_gpb_setpin(unsigned int pin, unsigned to)
++{
++	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0);
++	unsigned long offset = S3C2410_GPIO_OFFSET(pin);
++	unsigned long flags;
++	unsigned long dat;
++
++	BUG_ON(base != S3C24XX_GPIO_BASE(pin));
++
++	local_irq_save(flags);
++	dat = __raw_readl(base + 0x04);
++
++	/* Add the shadow values */
++	dat &= ~gpb_mask;
++	dat |= gpb_state;
++
++	/* Do the operation like s3c2410_gpio_setpin */
++	dat &= ~(1L << offset);
++	dat |= to << offset;
++
++	/* Update the shadow state */
++	if ((1L << offset) & gpb_mask)
++		set_shadow_gpio(offset, to);
++
++	__raw_writel(dat, base + 0x04);
++	local_irq_restore(flags);
++}
++EXPORT_SYMBOL(neo1973_gpb_setpin);
+diff --git a/drivers/leds/leds-neo1973-gta02.c b/drivers/leds/leds-neo1973-gta02.c
+index 343550a..952ad69 100644
+--- a/drivers/leds/leds-neo1973-gta02.c
++++ b/drivers/leds/leds-neo1973-gta02.c
+@@ -20,6 +20,7 @@
+ #include <asm/arch/pwm.h>
+ #include <asm/arch/gta02.h>
+ #include <asm/plat-s3c/regs-timer.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ #define MAX_LEDS 3
+ #define COUNTER 256
+@@ -60,14 +61,13 @@ static void gta02led_set(struct led_classdev *led_cdev,
+  	 * value == 0 -> 0% duty cycle (zero power)
+  	 */
+  	mutex_lock(&lp->mutex);
++
+ 	if (lp->has_pwm) {
+-			s3c2410_pwm_duty_cycle(value, &lp->pwm);
++		s3c2410_pwm_duty_cycle(value, &lp->pwm);
+ 	} else {
+-		if (value)
+-			s3c2410_gpio_setpin(lp->gpio, 1);
+-		else
+-			s3c2410_gpio_setpin(lp->gpio, 0);
++		neo1973_gpb_setpin(lp->gpio, value ? 1 : 0);
+ 	}
++
+ 	mutex_unlock(&lp->mutex);
+ }
+ 
+@@ -164,7 +164,7 @@ static int __init gta02led_probe(struct platform_device *pdev)
+ 		case S3C2410_GPB3:
+ 			lp->has_pwm = 0;
+ 			s3c2410_gpio_cfgpin(lp->gpio, S3C2410_GPIO_OUTPUT);
+-			s3c2410_gpio_setpin(lp->gpio, 0);
++			neo1973_gpb_add_shadow_gpio(lp->gpio);
+ 			break;
+ 		default:
+ 			break;
+diff --git a/drivers/leds/leds-neo1973-vibrator.c b/drivers/leds/leds-neo1973-vibrator.c
+index f31302d..647e860 100644
+--- a/drivers/leds/leds-neo1973-vibrator.c
++++ b/drivers/leds/leds-neo1973-vibrator.c
+@@ -24,6 +24,7 @@
+ #include <asm/plat-s3c/regs-timer.h>
+ 
+ #include <asm/arch-s3c2410/fiq_ipc_gta02.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ #define COUNTER 64
+ 
+@@ -56,9 +57,9 @@ static void neo1973_vib_vib_set(struct led_classdev *led_cdev,
+ 		s3c2410_pwm_duty_cycle(value / 4, &vp->pwm);
+ 	else {
+ 		if (value)
+-			s3c2410_gpio_setpin(vp->gpio, 1);
++			neo1973_gpb_setpin(vp->gpio, 1);
+ 		else
+-			s3c2410_gpio_setpin(vp->gpio, 0);
++			neo1973_gpb_setpin(vp->gpio, 0);
+ 	}
+ 
+ 	mutex_unlock(&vp->mutex);
+@@ -131,7 +132,7 @@ static int __init neo1973_vib_probe(struct platform_device *pdev)
+ 	platform_set_drvdata(pdev, &neo1973_vib_led);
+ 
+ 	if (machine_is_neo1973_gta02()) { /* use FIQ to control GPIO */
+-		s3c2410_gpio_setpin(neo1973_vib_led.gpio, 0); /* off */
++		neo1973_gpb_setpin(neo1973_vib_led.gpio, 0); /* off */
+ 		s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPIO_OUTPUT);
+ 		/* safe, kmalloc'd copy needed for FIQ ISR */
+ 		fiq_ipc.vib_gpio_pin = neo1973_vib_led.gpio;
+diff --git a/drivers/video/backlight/gta01_bl.c b/drivers/video/backlight/gta01_bl.c
+index bd7d41f..301ec9c 100644
+--- a/drivers/video/backlight/gta01_bl.c
++++ b/drivers/video/backlight/gta01_bl.c
+@@ -40,6 +40,7 @@
+ #include <asm/arch/pwm.h>
+ 
+ #include <asm/plat-s3c/regs-timer.h>
++#include <asm/plat-s3c24xx/neo1973.h>
+ 
+ static struct backlight_properties gta01bl_prop;
+ static struct backlight_device *gta01_backlight_device;
+@@ -83,12 +84,12 @@ static int gta01bl_send_intensity(struct backlight_device *bd)
+ 	mutex_lock(&gta01bl.mutex);
+ #ifdef GTA01_BACKLIGHT_ONOFF_ONLY
+ 	if (intensity)
+-		s3c2410_gpio_setpin(GTA01_GPIO_BACKLIGHT, 1);
++		neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
+ 	else
+-		s3c2410_gpio_setpin(GTA01_GPIO_BACKLIGHT, 0);
++		neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 0);
+ #else
+ 	if (intensity == bd->props.max_brightness) {
+-		s3c2410_gpio_setpin(GTA01_GPIO_BACKLIGHT, 1);
++		neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
+ 		s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
+ 	} else  {
+ 		s3c2410_pwm_duty_cycle(intensity & 0xffff, &gta01bl.pwm);
+@@ -222,7 +223,7 @@ static int gta01bl_remove(struct platform_device *dev)
+ 	mutex_destroy(&gta01bl.mutex);
+ 
+ 	s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPIO_OUTPUT);
+-	s3c2410_gpio_setpin(GTA01_GPIO_BACKLIGHT, 1);
++	neo1973_gpb_setpin(GTA01_GPIO_BACKLIGHT, 1);
+ 
+ 	return 0;
+ }
+diff --git a/include/asm-arm/plat-s3c24xx/neo1973.h b/include/asm-arm/plat-s3c24xx/neo1973.h
+new file mode 100644
+index 0000000..63297de
+--- /dev/null
++++ b/include/asm-arm/plat-s3c24xx/neo1973.h
+@@ -0,0 +1,33 @@
++/*
++ * include/asm-arm/plat-s3c24xx/neo1973.h
++ *
++ * Common utility code for GTA01 and GTA02
++ *
++ * Copyright (C) 2008 by Openmoko, Inc.
++ * Author: Holger Hans Peter Freyther <freyther@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef NEO1973_H
++#define NEO1973_H
++
++void neo1973_gpb_add_shadow_gpio(unsigned int gpio);
++void neo1973_gpb_setpin(unsigned int pin, unsigned to);
++
++#endif
+-- 
+1.5.6.3
+