changed Makefile and profiles, added patches for kernel 2.6.24

(stable-branch of Openmoko)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 264 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch
new file mode 100644
index 0000000000..e5900e0233
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.24/1214-introduce-resume-exception-capture.patch.patch
@@ -0,0 +1,264 @@
+From 8e18a9db5f895f654b06000d7bd10528e6b795f3 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Wed, 2 Jul 2008 22:44:11 +0100
+Subject: [PATCH] introduce-resume-exception-capture.patch
+
+This patch introduces a new resume debugging concept: if we
+get an OOPS inbetween starting suspend and finishing resume, it
+uses a new "emergency spew" device similar to BUT NOT REQUIRING
+CONFIG_DEBUG_LL to dump the syslog buffer and then the OOPS
+on the debug device defined by the existing CONFIG_DEBUG_S3C_UART
+index.  But neither CONFIG_DEBUG_LL nor the S3C low level configs
+are needed to use this feature.
+
+Another difference between this feature and CONFIG_DEBUG_LL is that
+it does not affect resume timing, ordering or UART traffic UNLESS
+there is an OOPS during resume.
+
+The patch adds three global exports, one to say if we are inside
+suspend / resume, and two callbacks for printk() to use to init
+and dump the emergency data.  The callbacks are set in s3c serial
+device init, but the whole structure is arch independent.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ drivers/serial/s3c2410.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
+ include/linux/kernel.h   |    2 +
+ include/linux/suspend.h  |    6 ++++
+ kernel/power/main.c      |   10 ++++++-
+ kernel/printk.c          |   41 +++++++++++++++++++++++++++
+ 5 files changed, 127 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
+index 73c6284..fef3c8f 100644
+--- a/drivers/serial/s3c2410.c
++++ b/drivers/serial/s3c2410.c
+@@ -81,6 +81,7 @@
+ 
+ #include <asm/plat-s3c/regs-serial.h>
+ #include <asm/arch/regs-gpio.h>
++#include <asm/arch/regs-clock.h>
+ 
+ /* structures */
+ 
+@@ -992,6 +993,69 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+ #endif
+ };
+ 
++static void s3c24xx_serial_force_debug_port_up(void)
++{
++	struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
++							 CONFIG_DEBUG_S3C_UART];
++	struct s3c24xx_uart_clksrc *clksrc = NULL;
++	struct clk *clk = NULL;
++	unsigned long tmp;
++
++	s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
++
++	tmp = __raw_readl(S3C2410_CLKCON);
++
++	/* re-start uart clocks */
++	tmp |= S3C2410_CLKCON_UART0;
++	tmp |= S3C2410_CLKCON_UART1;
++	tmp |= S3C2410_CLKCON_UART2;
++
++	__raw_writel(tmp, S3C2410_CLKCON);
++	udelay(10);
++
++	s3c24xx_serial_setsource(&ourport->port, clksrc);
++
++	if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
++		clk_disable(ourport->baudclk);
++		ourport->baudclk  = NULL;
++	}
++
++	clk_enable(clk);
++
++	ourport->clksrc = clksrc;
++	ourport->baudclk = clk;
++}
++
++static void s3c2410_printascii(const char *sz)
++{
++	struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
++							 CONFIG_DEBUG_S3C_UART];
++	struct uart_port *port = &ourport->port;
++
++	/* 8 N 1 */
++	wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
++	/* polling mode */
++	wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
++	/* disable FIFO */
++	wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
++	/* fix baud rate */
++	wr_regl(port, S3C2410_UBRDIV, 26);
++
++	while (*sz) {
++		int timeout = 10000000;
++
++		/* spin on it being busy */
++		while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
++			;
++
++		/* transmit register */
++		wr_regl(port, S3C2410_UTXH, *sz);
++
++		sz++;
++	}
++}
++
++
+ /* s3c24xx_serial_resetport
+  *
+  * wrapper to call the specific reset for this port (reset the fifos
+@@ -1167,6 +1231,11 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
+ static int s3c24xx_serial_init(struct platform_driver *drv,
+ 			       struct s3c24xx_uart_info *info)
+ {
++	/* set up the emergency debug UART functions */
++
++	printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up;
++	printk_emergency_debug_spew_send_string = s3c2410_printascii;
++
+ 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
+ 	return platform_driver_register(drv);
+ }
+diff --git a/include/linux/kernel.h b/include/linux/kernel.h
+index 94bc996..8e565b4 100644
+--- a/include/linux/kernel.h
++++ b/include/linux/kernel.h
+@@ -182,6 +182,8 @@ asmlinkage int printk(const char * fmt, ...)
+ extern int log_buf_get_len(void);
+ extern int log_buf_read(int idx);
+ extern int log_buf_copy(char *dest, int idx, int len);
++extern void (*printk_emergency_debug_spew_init)(void);
++extern void (*printk_emergency_debug_spew_send_string)(const char *);
+ #else
+ static inline int vprintk(const char *s, va_list args)
+ 	__attribute__ ((format (printf, 1, 0)));
+diff --git a/include/linux/suspend.h b/include/linux/suspend.h
+index 4360e08..7186eef 100644
+--- a/include/linux/suspend.h
++++ b/include/linux/suspend.h
+@@ -122,6 +122,12 @@ struct pbe {
+ 	struct pbe *next;
+ };
+ 
++/**
++ * global indication we are somewhere between start of suspend and end of
++ * resume, nonzero is true
++ */
++extern int global_inside_suspend;
++
+ /* mm/page_alloc.c */
+ extern void drain_local_pages(void);
+ extern void mark_free_pages(struct zone *zone);
+diff --git a/kernel/power/main.c b/kernel/power/main.c
+index f71c950..d87bf0d 100644
+--- a/kernel/power/main.c
++++ b/kernel/power/main.c
+@@ -31,6 +31,10 @@ DEFINE_MUTEX(pm_mutex);
+ unsigned int pm_flags;
+ EXPORT_SYMBOL(pm_flags);
+ 
++int global_inside_suspend;
++EXPORT_SYMBOL(global_inside_suspend);
++
++
+ #ifdef CONFIG_SUSPEND
+ 
+ /* This is just an arbitrary number */
+@@ -156,10 +160,12 @@ int suspend_devices_and_enter(suspend_state_t state)
+ 	if (!suspend_ops)
+ 		return -ENOSYS;
+ 
++	global_inside_suspend = 1;
++
+ 	if (suspend_ops->set_target) {
+ 		error = suspend_ops->set_target(state);
+ 		if (error)
+-			return error;
++			goto bail;
+ 	}
+ 	suspend_console();
+ 	error = device_suspend(PMSG_SUSPEND);
+@@ -183,6 +189,8 @@ int suspend_devices_and_enter(suspend_state_t state)
+ 	device_resume();
+  Resume_console:
+ 	resume_console();
++bail:
++	global_inside_suspend = 0;
+ 	return error;
+ }
+ 
+diff --git a/kernel/printk.c b/kernel/printk.c
+index 89011bf..c8691bc 100644
+--- a/kernel/printk.c
++++ b/kernel/printk.c
+@@ -33,8 +33,11 @@
+ #include <linux/bootmem.h>
+ #include <linux/syscalls.h>
+ #include <linux/jiffies.h>
++#include <linux/suspend.h>
+ 
+ #include <asm/uaccess.h>
++#include <asm/plat-s3c24xx/neo1973.h>
++#include <asm/arch/gta02.h>
+ 
+ #define __LOG_BUF_LEN	(1 << CONFIG_LOG_BUF_SHIFT)
+ 
+@@ -61,6 +64,12 @@ int console_printk[4] = {
+ int oops_in_progress;
+ EXPORT_SYMBOL(oops_in_progress);
+ 
++void (*printk_emergency_debug_spew_init)(void) = NULL;
++EXPORT_SYMBOL(printk_emergency_debug_spew_init);
++
++void (*printk_emergency_debug_spew_send_string)(const char *) = NULL;
++EXPORT_SYMBOL(printk_emergency_debug_spew_send_string);
++
+ /*
+  * console_sem protects the console_drivers list, and also
+  * provides serialisation for access to the entire console
+@@ -653,6 +662,38 @@ asmlinkage int vprintk(const char *fmt, va_list args)
+ 	/* Emit the output into the temporary buffer */
+ 	printed_len = vscnprintf(printk_buf, sizeof(printk_buf), fmt, args);
+ 
++	/* if you're debugging resume, the normal methods can change resume
++	 * ordering behaviours because their debugging output is synchronous
++	 * (ie, CONFIG_DEBUG_LL).  If your problem is an OOPS, this code
++	 * will not affect the speed and duration and ordering of resume
++	 * actions, but will give you a chance to read the full undumped
++	 * syslog AND the OOPS data when it happens
++	 *
++	 * if you support it, your debug device init can override the exported
++	 * emergency_debug_spew_init and emergency_debug_spew_send_string to
++	 * usually force polling or bitbanging on your debug console device
++	 */
++	if (oops_in_progress && global_inside_suspend &&
++	    printk_emergency_debug_spew_init &&
++	    printk_emergency_debug_spew_send_string) {
++		unsigned long cur_index;
++		char ch[2];
++
++		if (global_inside_suspend == 1) {
++			(printk_emergency_debug_spew_init)();
++
++			ch[1] = '\0';
++			cur_index = con_start;
++			while (cur_index != log_end) {
++				ch[0] = LOG_BUF(cur_index);
++				(printk_emergency_debug_spew_send_string)(ch);
++				cur_index++;
++			}
++			global_inside_suspend++; /* only once */
++		}
++		(printk_emergency_debug_spew_send_string)(printk_buf);
++	}
++
+ 	/*
+ 	 * Copy the output into log_buf.  If the caller didn't provide
+ 	 * appropriate log level tags, we insert them here
+-- 
+1.5.6.5
+