[rb532] remove 2.6.27 we did not use it and went to 2.6.28 directly

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15387 3c298f89-4303-0410-b956-a3cf2f4a3e73

25 files changed, 0 insertions, 1810 deletions

diff --git a/target/linux/rb532/patches-2.6.27/001-git_diffs.patch b/target/linux/rb532/patches-2.6.27/001-git_diffs.patch
deleted file mode 100644
index d6c244b294..0000000000
--- a/target/linux/rb532/patches-2.6.27/001-git_diffs.patch
+++ /dev/null
@@ -1,743 +0,0 @@
-diff -urN a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
---- a/arch/mips/rb532/devices.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/devices.c	2008-11-15 17:43:28.000000000 +0100
-@@ -34,21 +34,11 @@
- #include <asm/mach-rc32434/rb.h>
- #include <asm/mach-rc32434/integ.h>
- #include <asm/mach-rc32434/gpio.h>
--
--#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
--#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
--#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
--#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
-+#include <asm/mach-rc32434/irq.h>
- 
- #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
- #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
- 
--/* NAND definitions */
--#define GPIO_RDY (1 << 0x08)
--#define GPIO_WPX (1 << 0x09)
--#define GPIO_ALE (1 << 0x0a)
--#define GPIO_CLE (1 << 0x0b)
--
- static struct resource korina_dev0_res[] = {
- 	{
- 		.name = "korina_regs",
-@@ -94,15 +84,13 @@
- };
- 
- static struct platform_device korina_dev0 = {
--	.id = 0,
-+	.id = -1,
- 	.name = "korina",
- 	.dev.platform_data = &korina_dev0_data,
- 	.resource = korina_dev0_res,
- 	.num_resources = ARRAY_SIZE(korina_dev0_res),
- };
- 
--#define CF_GPIO_NUM 13
--
- static struct resource cf_slot0_res[] = {
- 	{
- 		.name = "cf_membase",
-@@ -116,11 +104,11 @@
- };
- 
- static struct cf_device cf_slot0_data = {
--	.gpio_pin = 13
-+	.gpio_pin = CF_GPIO_NUM
- };
- 
- static struct platform_device cf_slot0 = {
--	.id = 0,
-+	.id = -1,
- 	.name = "pata-rb532-cf",
- 	.dev.platform_data = &cf_slot0_data,
- 	.resource = cf_slot0_res,
-@@ -130,7 +118,7 @@
- /* Resources and device for NAND */
- static int rb532_dev_ready(struct mtd_info *mtd)
- {
--	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-+	return gpio_get_value(GPIO_RDY);
- }
- 
- static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-@@ -185,7 +173,7 @@
- 
- static struct platform_device rb532_led = {
- 	.name = "rb532-led",
--	.id = 0,
-+	.id = -1,
- };
- 
- static struct gpio_keys_button rb532_gpio_btn[] = {
-@@ -292,7 +280,7 @@
- {
- 	/* Look for the CF card reader */
- 	if (!readl(IDT434_REG_BASE + DEV1MASK))
--		rb532_devs[1] = NULL;
-+		rb532_devs[2] = NULL;	/* disable cf_slot0 at index 2 */
- 	else {
- 		cf_slot0_res[0].start =
- 		    readl(IDT434_REG_BASE + DEV1BASE);
-diff -urN a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
---- a/arch/mips/rb532/gpio.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/gpio.c	2008-11-15 17:43:28.000000000 +0100
-@@ -27,28 +27,27 @@
-  */
- 
- #include <linux/kernel.h>
--#include <linux/gpio.h>
- #include <linux/init.h>
- #include <linux/types.h>
--#include <linux/pci.h>
- #include <linux/spinlock.h>
--#include <linux/io.h>
- #include <linux/platform_device.h>
--
--#include <asm/addrspace.h>
-+#include <linux/gpio.h>
- 
- #include <asm/mach-rc32434/rb.h>
-+#include <asm/mach-rc32434/gpio.h>
- 
--struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
--EXPORT_SYMBOL(rb532_gpio_reg0);
-+struct rb532_gpio_chip {
-+	struct gpio_chip chip;
-+	void __iomem	 *regbase;
-+};
- 
- struct mpmc_device dev3;
- 
- static struct resource rb532_gpio_reg0_res[] = {
- 	{
- 		.name 	= "gpio_reg0",
--		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
--		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
-+		.start 	= REGBASE + GPIOBASE,
-+		.end 	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
- 		.flags 	= IORESOURCE_MEM,
- 	}
- };
-@@ -56,8 +55,8 @@
- static struct resource rb532_dev3_ctl_res[] = {
- 	{
- 		.name	= "dev3_ctl",
--		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
--		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
-+		.start	= REGBASE + DEV3BASE,
-+		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
- 		.flags	= IORESOURCE_MEM,
- 	}
- };
-@@ -70,7 +69,7 @@
- 
- 	spin_lock_irqsave(&dev3.lock, flags);
- 
--	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
-+	data = readl(IDT434_REG_BASE + reg_offs);
- 	for (i = 0; i != len; ++i) {
- 		if (val & (1 << i))
- 			data |= (1 << (i + bit));
-@@ -108,114 +107,166 @@
- }
- EXPORT_SYMBOL(get_latch_u5);
- 
--int rb532_gpio_get_value(unsigned gpio)
-+/* rb532_set_bit - sanely set a bit
-+ *
-+ * bitval: new value for the bit
-+ * offset: bit index in the 4 byte address range
-+ * ioaddr: 4 byte aligned address being altered
-+ */
-+static inline void rb532_set_bit(unsigned bitval,
-+		unsigned offset, void __iomem *ioaddr)
- {
--	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
--}
--EXPORT_SYMBOL(rb532_gpio_get_value);
-+	unsigned long flags;
-+	u32 val;
- 
--void rb532_gpio_set_value(unsigned gpio, int value)
--{
--	unsigned tmp;
-+	bitval = !!bitval;              /* map parameter to {0,1} */
-+
-+	local_irq_save(flags);
- 
--	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
--	if (value)
--		tmp |= 1 << gpio;
-+	val = readl(ioaddr);
-+	val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
-+	val |=  (  bitval << offset );   /* set bit if bitval == 1 */
-+	writel(val, ioaddr);
- 
--	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
-+	local_irq_restore(flags);
- }
--EXPORT_SYMBOL(rb532_gpio_set_value);
- 
--int rb532_gpio_direction_input(unsigned gpio)
-+/* rb532_get_bit - read a bit
-+ *
-+ * returns the boolean state of the bit, which may be > 1
-+ */
-+static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
- {
--	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
--	       (void *)&rb532_gpio_reg0->gpiocfg);
--
--	return 0;
-+	return (readl(ioaddr) & (1 << offset));
- }
--EXPORT_SYMBOL(rb532_gpio_direction_input);
- 
--int rb532_gpio_direction_output(unsigned gpio, int value)
-+/*
-+ * Return GPIO level */
-+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
- {
--	gpio_set_value(gpio, value);
--	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
--	       (void *)&rb532_gpio_reg0->gpiocfg);
-+	struct rb532_gpio_chip	*gpch;
- 
--	return 0;
-+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
-+	return rb532_get_bit(offset, gpch->regbase + GPIOD);
- }
--EXPORT_SYMBOL(rb532_gpio_direction_output);
- 
--void rb532_gpio_set_int_level(unsigned gpio, int value)
-+/*
-+ * Set output GPIO level
-+ */
-+static void rb532_gpio_set(struct gpio_chip *chip,
-+				unsigned offset, int value)
- {
--	unsigned tmp;
-+	struct rb532_gpio_chip	*gpch;
- 
--	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
--	if (value)
--		tmp |= 1 << gpio;
--	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
-+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
-+	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
- }
--EXPORT_SYMBOL(rb532_gpio_set_int_level);
- 
--int rb532_gpio_get_int_level(unsigned gpio)
-+/*
-+ * Set GPIO direction to input
-+ */
-+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
- {
--	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
-+	struct rb532_gpio_chip	*gpch;
-+
-+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
-+
-+	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
-+		return 1;	/* alternate function, GPIOCFG is ignored */
-+
-+	rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
-+	return 0;
- }
--EXPORT_SYMBOL(rb532_gpio_get_int_level);
- 
--void rb532_gpio_set_int_status(unsigned gpio, int value)
-+/*
-+ * Set GPIO direction to output
-+ */
-+static int rb532_gpio_direction_output(struct gpio_chip *chip,
-+					unsigned offset, int value)
- {
--	unsigned tmp;
-+	struct rb532_gpio_chip	*gpch;
-+
-+	gpch = container_of(chip, struct rb532_gpio_chip, chip);
- 
--	tmp = readl(&rb532_gpio_reg0->gpioistat);
--	if (value)
--		tmp |= 1 << gpio;
--	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
-+	if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
-+		return 1;	/* alternate function, GPIOCFG is ignored */
-+
-+	/* set the initial output value */
-+	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
-+
-+	rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
-+	return 0;
- }
--EXPORT_SYMBOL(rb532_gpio_set_int_status);
- 
--int rb532_gpio_get_int_status(unsigned gpio)
-+static struct rb532_gpio_chip rb532_gpio_chip[] = {
-+	[0] = {
-+		.chip = {
-+			.label			= "gpio0",
-+			.direction_input	= rb532_gpio_direction_input,
-+			.direction_output	= rb532_gpio_direction_output,
-+			.get			= rb532_gpio_get,
-+			.set			= rb532_gpio_set,
-+			.base			= 0,
-+			.ngpio			= 32,
-+		},
-+	},
-+};
-+
-+/*
-+ * Set GPIO interrupt level
-+ */
-+void rb532_gpio_set_ilevel(int bit, unsigned gpio)
- {
--	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
-+	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
- }
--EXPORT_SYMBOL(rb532_gpio_get_int_status);
-+EXPORT_SYMBOL(rb532_gpio_set_ilevel);
- 
--void rb532_gpio_set_func(unsigned gpio, int value)
-+/*
-+ * Set GPIO interrupt status
-+ */
-+void rb532_gpio_set_istat(int bit, unsigned gpio)
- {
--	unsigned tmp;
--
--	tmp = readl(&rb532_gpio_reg0->gpiofunc);
--	if (value)
--		tmp |= 1 << gpio;
--	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
-+	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
- }
--EXPORT_SYMBOL(rb532_gpio_set_func);
-+EXPORT_SYMBOL(rb532_gpio_set_istat);
- 
--int rb532_gpio_get_func(unsigned gpio)
-+/*
-+ * Configure GPIO alternate function
-+ */
-+static void rb532_gpio_set_func(int bit, unsigned gpio)
- {
--	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
-+       rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
- }
--EXPORT_SYMBOL(rb532_gpio_get_func);
- 
- int __init rb532_gpio_init(void)
- {
--	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
--				rb532_gpio_reg0_res[0].end -
--				rb532_gpio_reg0_res[0].start);
-+	struct resource *r;
-+
-+	r = rb532_gpio_reg0_res;
-+	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
- 
--	if (!rb532_gpio_reg0) {
-+	if (!rb532_gpio_chip->regbase) {
- 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
- 		return -ENXIO;
- 	}
- 
--	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
--				rb532_dev3_ctl_res[0].end -
--				rb532_dev3_ctl_res[0].start);
-+	/* Register our GPIO chip */
-+	gpiochip_add(&rb532_gpio_chip->chip);
-+
-+	r = rb532_dev3_ctl_res;
-+	dev3.base = ioremap_nocache(r->start, r->end - r->start);
- 
- 	if (!dev3.base) {
- 		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
- 		return -ENXIO;
- 	}
- 
-+	/* configure CF_GPIO_NUM as CFRDY IRQ source */
-+	rb532_gpio_set_func(0, CF_GPIO_NUM);
-+	rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
-+	rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
-+	rb532_gpio_set_istat(0, CF_GPIO_NUM);
-+
- 	return 0;
- }
- arch_initcall(rb532_gpio_init);
-diff -urN a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
---- a/arch/mips/rb532/irq.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/irq.c	2008-11-15 17:43:28.000000000 +0100
-@@ -45,7 +45,7 @@
- #include <asm/mipsregs.h>
- #include <asm/system.h>
- 
--#include <asm/mach-rc32434/rc32434.h>
-+#include <asm/mach-rc32434/irq.h>
- 
- struct intr_group {
- 	u32 mask;	/* mask of valid bits in pending/mask registers */
-diff -urN a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
---- a/arch/mips/rb532/prom.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/prom.c	2008-11-15 17:43:28.000000000 +0100
-@@ -37,12 +37,8 @@
- #include <asm/mach-rc32434/ddr.h>
- #include <asm/mach-rc32434/prom.h>
- 
--extern void __init setup_serial_port(void);
--
- unsigned int idt_cpu_freq = 132000000;
- EXPORT_SYMBOL(idt_cpu_freq);
--unsigned int gpio_bootup_state;
--EXPORT_SYMBOL(gpio_bootup_state);
- 
- static struct resource ddr_reg[] = {
- 	{
-@@ -108,9 +104,6 @@
- 				mips_machtype = MACH_MIKROTIK_RB532;
- 		}
- 
--		if (match_tag(prom_argv[i], GPIO_TAG))
--			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
--
- 		strcpy(cp, prom_argv[i]);
- 		cp += strlen(prom_argv[i]);
- 	}
-@@ -122,11 +115,6 @@
- 		strcpy(cp, arcs_cmdline);
- 		cp += strlen(arcs_cmdline);
- 	}
--	if (gpio_bootup_state & 0x02)
--		strcpy(cp, GPIO_INIT_NOBUTTON);
--	else
--		strcpy(cp, GPIO_INIT_BUTTON);
--
- 	cmd_line[CL_SIZE-1] = '\0';
- 
- 	strcpy(arcs_cmdline, cmd_line);
-diff -urN a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
---- a/arch/mips/rb532/serial.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/serial.c	2008-11-15 17:43:28.000000000 +0100
-@@ -31,16 +31,16 @@
- #include <linux/serial_8250.h>
- 
- #include <asm/serial.h>
--#include <asm/mach-rc32434/rc32434.h>
-+#include <asm/mach-rc32434/rb.h>
- 
- extern unsigned int idt_cpu_freq;
- 
- static struct uart_port rb532_uart = {
- 	.type = PORT_16550A,
- 	.line = 0,
--	.irq = RC32434_UART0_IRQ,
-+	.irq = UART0_IRQ,
- 	.iotype = UPIO_MEM,
--	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
-+	.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
- 	.regshift = 2
- };
- 
-diff -urN a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
---- a/arch/mips/rb532/setup.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/setup.c	2008-11-15 17:43:28.000000000 +0100
-@@ -9,7 +9,7 @@
- #include <asm/time.h>
- #include <linux/ioport.h>
- 
--#include <asm/mach-rc32434/rc32434.h>
-+#include <asm/mach-rc32434/rb.h>
- #include <asm/mach-rc32434/pci.h>
- 
- struct pci_reg __iomem *pci_reg;
-@@ -27,7 +27,7 @@
- static void rb_machine_restart(char *command)
- {
- 	/* just jump to the reset vector */
--	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
-+	writel(0x80000001, IDT434_REG_BASE + RST);
- 	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
- }
- 
-diff -urN a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
---- a/arch/mips/rb532/time.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/rb532/time.c	2008-11-15 17:43:28.000000000 +0100
-@@ -28,7 +28,6 @@
- #include <linux/timex.h>
- 
- #include <asm/mipsregs.h>
--#include <asm/debug.h>
- #include <asm/time.h>
- #include <asm/mach-rc32434/rc32434.h>
- 
-diff -urN linux-2.6.27.5/arch/mips/Kconfig linux-2.6.27.5.new/arch/mips/Kconfig
---- linux-2.6.27.5/arch/mips/Kconfig	2008-11-07 18:55:34.000000000 +0100
-+++ linux-2.6.27.5.new/arch/mips/Kconfig	2008-11-15 17:50:42.000000000 +0100
-@@ -568,7 +568,7 @@
- 	select SYS_SUPPORTS_LITTLE_ENDIAN
- 	select SWAP_IO_SPACE
- 	select BOOT_RAW
--	select GENERIC_GPIO
-+	select ARCH_REQUIRE_GPIOLIB
- 	help
- 	  Support the Mikrotik(tm) RouterBoard 532 series,
- 	  based on the IDT RC32434 SoC.
-diff -urN a/include/asm-mips/mach-rc32434/gpio.h b/include-mips/asm/mach-rc32434/gpio.h
---- a/include/asm-mips/mach-rc32434/gpio.h	2008-11-07 18:55:34.000000000 +0100
-+++ b/include/asm-mips/mach-rc32434/gpio.h	2008-11-15 17:43:28.000000000 +0100
-@@ -14,6 +14,16 @@
- #define _RC32434_GPIO_H_
- 
- #include <linux/types.h>
-+#include <asm-generic/gpio.h>
-+
-+#define NR_BUILTIN_GPIO		32
-+
-+#define gpio_get_value	__gpio_get_value
-+#define gpio_set_value	__gpio_set_value
-+#define gpio_cansleep	__gpio_cansleep
-+
-+#define gpio_to_irq(gpio)	(8 + 4 * 32 + gpio)
-+#define irq_to_gpio(irq)	(irq - (8 + 4 * 32))
- 
- struct rb532_gpio_reg {
- 	u32   gpiofunc;   /* GPIO Function Register
-@@ -61,66 +71,20 @@
- /* PCI messaging unit */
- #define RC32434_PCI_MSU_GPIO	(1 << 13)
- 
-+/* NAND GPIO signals */
-+#define GPIO_RDY		8
-+#define GPIO_WPX	9
-+#define GPIO_ALE		10
-+#define GPIO_CLE		11
-+
-+/* Compact Flash GPIO pin */
-+#define CF_GPIO_NUM		13
- 
- extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
- extern unsigned get_434_reg(unsigned reg_offs);
- extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
- extern unsigned char get_latch_u5(void);
--
--extern int rb532_gpio_get_value(unsigned gpio);
--extern void rb532_gpio_set_value(unsigned gpio, int value);
--extern int rb532_gpio_direction_input(unsigned gpio);
--extern int rb532_gpio_direction_output(unsigned gpio, int value);
--extern void rb532_gpio_set_int_level(unsigned gpio, int value);
--extern int rb532_gpio_get_int_level(unsigned gpio);
--extern void rb532_gpio_set_int_status(unsigned gpio, int value);
--extern int rb532_gpio_get_int_status(unsigned gpio);
--
--
--/* Wrappers for the arch-neutral GPIO API */
--
--static inline int gpio_request(unsigned gpio, const char *label)
--{
--	/* Not yet implemented */
--	return 0;
--}
--
--static inline void gpio_free(unsigned gpio)
--{
--	/* Not yet implemented */
--}
--
--static inline int gpio_direction_input(unsigned gpio)
--{
--	return rb532_gpio_direction_input(gpio);
--}
--
--static inline int gpio_direction_output(unsigned gpio, int value)
--{
--	return rb532_gpio_direction_output(gpio, value);
--}
--
--static inline int gpio_get_value(unsigned gpio)
--{
--	return rb532_gpio_get_value(gpio);
--}
--
--static inline void gpio_set_value(unsigned gpio, int value)
--{
--	rb532_gpio_set_value(gpio, value);
--}
--
--static inline int gpio_to_irq(unsigned gpio)
--{
--	return gpio;
--}
--
--static inline int irq_to_gpio(unsigned irq)
--{
--	return irq;
--}
--
--/* For cansleep */
--#include <asm-generic/gpio.h>
-+extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
-+extern void rb532_gpio_set_istat(int bit, unsigned gpio);
- 
- #endif /* _RC32434_GPIO_H_ */
-diff -urN a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h
---- a/include/asm-mips/mach-rc32434/irq.h	2008-11-07 18:55:34.000000000 +0100
-+++ b/include/asm-mips/mach-rc32434/irq.h	2008-11-15 17:43:28.000000000 +0100
-@@ -4,5 +4,30 @@
- #define NR_IRQS	256
- 
- #include <asm/mach-generic/irq.h>
-+#include <asm/mach-rc32434/rb.h>
-+
-+/* Interrupt Controller */
-+#define IC_GROUP0_PEND		(REGBASE + 0x38000)
-+#define IC_GROUP0_MASK		(REGBASE + 0x38008)
-+#define IC_GROUP_OFFSET		0x0C
-+
-+#define NUM_INTR_GROUPS		5
-+
-+/* 16550 UARTs */
-+#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
-+					/* GRP3 IRQ numbers start here */
-+#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
-+					/* GRP4 IRQ numbers start here */
-+#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
-+					/* GRP5 IRQ numbers start here */
-+#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
-+#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
-+
-+#define UART0_IRQ		(GROUP3_IRQ_BASE + 0)
-+
-+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
-+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
-+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
-+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
- 
- #endif  /* __ASM_RC32434_IRQ_H */
-diff -urN a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h
---- a/include/asm-mips/mach-rc32434/prom.h	2008-11-07 18:55:34.000000000 +0100
-+++ b/include/asm-mips/mach-rc32434/prom.h	2008-11-15 17:43:28.000000000 +0100
-@@ -28,14 +28,10 @@
- 
- #define PROM_ENTRY(x)		(0xbfc00000 + ((x) * 8))
- 
--#define GPIO_INIT_NOBUTTON	""
--#define GPIO_INIT_BUTTON	" 2"
--
- #define SR_NMI			0x00180000
- #define SERIAL_SPEED_ENTRY	0x00000001
- 
- #define FREQ_TAG		"HZ="
--#define GPIO_TAG		"gpio="
- #define KMAC_TAG		"kmac="
- #define MEM_TAG			"mem="
- #define BOARD_TAG		"board="
-diff -urN a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h
---- a/include/asm-mips/mach-rc32434/rb.h	2008-11-07 18:55:34.000000000 +0100
-+++ b/include/asm-mips/mach-rc32434/rb.h	2008-11-15 17:43:28.000000000 +0100
-@@ -17,7 +17,10 @@
- 
- #include <linux/genhd.h>
- 
--#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(0x18000000))
-+#define REGBASE		0x18000000
-+#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
-+#define UART0BASE	0x58000
-+#define RST		(1 << 15)
- #define DEV0BASE	0x010000
- #define DEV0MASK	0x010004
- #define DEV0C		0x010008
-@@ -37,12 +40,14 @@
- #define BTCS		0x010040
- #define BTCOMPARE	0x010044
- #define GPIOBASE	0x050000
--#define GPIOCFG		0x050004
--#define GPIOD		0x050008
--#define GPIOILEVEL	0x05000C
--#define GPIOISTAT	0x050010
--#define GPIONMIEN	0x050014
--#define IMASK6		0x038038
-+/* Offsets relative to GPIOBASE */
-+#define GPIOFUNC	0x00
-+#define GPIOCFG		0x04
-+#define GPIOD		0x08
-+#define GPIOILEVEL	0x0C
-+#define GPIOISTAT	0x10
-+#define GPIONMIEN	0x14
-+#define IMASK6		0x38
- #define LO_WPX		(1 << 0)
- #define LO_ALE		(1 << 1)
- #define LO_CLE		(1 << 2)
-diff -urN a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h
---- a/include/asm-mips/mach-rc32434/rc32434.h	2008-11-07 18:55:34.000000000 +0100
-+++ b/include/asm-mips/mach-rc32434/rc32434.h	2008-11-15 17:43:28.000000000 +0100
-@@ -8,37 +8,7 @@
- #include <linux/delay.h>
- #include <linux/io.h>
- 
--#define RC32434_REG_BASE	0x18000000
--#define RC32434_RST		(1 << 15)
--
- #define IDT_CLOCK_MULT		2
--#define MIPS_CPU_TIMER_IRQ	7
--
--/* Interrupt Controller */
--#define IC_GROUP0_PEND		(RC32434_REG_BASE + 0x38000)
--#define IC_GROUP0_MASK		(RC32434_REG_BASE + 0x38008)
--#define IC_GROUP_OFFSET		0x0C
--
--#define NUM_INTR_GROUPS		5
--
--/* 16550 UARTs */
--#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
--					/* GRP3 IRQ numbers start here */
--#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
--					/* GRP4 IRQ numbers start here */
--#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
--					/* GRP5 IRQ numbers start here */
--#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
--#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
--
--
--#ifdef __MIPSEB__
--#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58003)
--#else
--#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58000)
--#endif
--
--#define RC32434_UART0_IRQ	(GROUP3_IRQ_BASE + 0)
- 
- /* cpu pipeline flush */
- static inline void rc32434_sync(void)
-@@ -46,16 +16,4 @@
- 	__asm__ volatile ("sync");
- }
- 
--static inline void rc32434_sync_udelay(int us)
--{
--	__asm__ volatile ("sync");
--	udelay(us);
--}
--
--static inline void rc32434_sync_delay(int ms)
--{
--	__asm__ volatile ("sync");
--	mdelay(ms);
--}
--
- #endif  /* _ASM_RC32434_RC32434_H_ */
---- a/arch/mips/pci/fixup-rc32434.c	2008-11-07 18:55:34.000000000 +0100
-+++ b/arch/mips/pci/fixup-rc32434.c	2008-11-15 17:43:28.000000000 +0100
-@@ -30,6 +30,7 @@
- #include <linux/init.h>
- 
- #include <asm/mach-rc32434/rc32434.h>
-+#include <asm/mach-rc32434/irq.h>
- 
- static int __devinitdata irq_map[2][12] = {
- 	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
diff --git a/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch b/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch
deleted file mode 100644
index 5786803e47..0000000000
--- a/target/linux/rb532/patches-2.6.27/002-pci_io_map_base.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-The code is rather based on trial-and-error than knowledge. Verified Via
-Rhine functionality in PIO as well as MMIO mode.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
-Tested-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/pci/pci-rc32434.c |   11 +++++++++++
- 1 files changed, 11 insertions(+), 0 deletions(-)
-
-diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
-index 1c2821e..71f7d27 100644
---- a/arch/mips/pci/pci-rc32434.c
-+++ b/arch/mips/pci/pci-rc32434.c
-@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
- 
- static int __init rc32434_pci_init(void)
- {
-+	void __iomem *io_map_base;
-+
- 	pr_info("PCI: Initializing PCI\n");
- 
- 	ioport_resource.start = rc32434_res_pci_io1.start;
-@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
- 
- 	rc32434_pcibridge_init();
- 
-+	io_map_base = ioremap(rc32434_res_pci_io1.start,
-+		rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
-+
-+	if (!io_map_base)
-+		return -ENOMEM;
-+
-+	rc32434_controller.io_map_base =
-+		(unsigned long)io_map_base - rc32434_res_pci_io1.start;
-+
- 	register_pci_controller(&rc32434_controller);
- 	rc32434_sync();
- 
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch b/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch
deleted file mode 100644
index 49f9f4b3b5..0000000000
--- a/target/linux/rb532/patches-2.6.27/003-gpio_bit_setting.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-The algorithm works unconditionally. If bitval is one, the first line is
-a no op and the second line sets the bit at offset position. Vice versa,
-if bitval is zero, the first line clears the bit at offset position and
-the second line is a no op.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- arch/mips/rb532/gpio.c |    6 ++----
- 1 files changed, 2 insertions(+), 4 deletions(-)
-
-diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
-index 0e84c8a..e35cb75 100644
---- a/arch/mips/rb532/gpio.c
-+++ b/arch/mips/rb532/gpio.c
-@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval,
- 	unsigned long flags;
- 	u32 val;
- 
--	bitval = !!bitval;              /* map parameter to {0,1} */
--
- 	local_irq_save(flags);
- 
- 	val = readl(ioaddr);
--	val &= ~( ~bitval << offset );   /* unset bit if bitval == 0 */
--	val |=  (  bitval << offset );   /* set bit if bitval == 1 */
-+	val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
-+	val |= (!!bitval << offset);   /* set bit if bitval == 1 */
- 	writel(val, ioaddr);
- 
- 	local_irq_restore(flags);
--- 
-1.5.6.4
-
-
-
diff --git a/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch b/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch
deleted file mode 100644
index 50dedefbe7..0000000000
--- a/target/linux/rb532/patches-2.6.27/004-fix_pata_rb532_cf.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-After applying the following changes I could verify functionality by
-mounting a filesystem on the cfdisk and reading/writing files in it.
-
-The set_irq_type() function must be wrong, as there is no set_type()
-function defined for the rb532 IRQ chip. But as the used IRQ actually is
-being triggered by a GPIO, setting it's interrupt level should be the
-right alternative. Also to clear a GPIO triggered IRQ, the source has to
-be cleared. This is being done at the end of rb532_pata_irq_handler.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
-Acked-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/ata/pata_rb532_cf.c |   15 ++++++++++-----
- 1 files changed, 10 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
-index f8b3ffc..7b11f40 100644
---- a/drivers/ata/pata_rb532_cf.c
-+++ b/drivers/ata/pata_rb532_cf.c
-@@ -31,6 +31,7 @@
- #include <scsi/scsi_host.h>
- 
- #include <asm/gpio.h>
-+#include <asm/mach-rc32434/gpio.h>
- 
- #define DRV_NAME	"pata-rb532-cf"
- #define DRV_VERSION	"0.1.0"
-@@ -39,7 +40,8 @@
- #define RB500_CF_MAXPORTS	1
- #define RB500_CF_IO_DELAY	400
- 
--#define RB500_CF_REG_CMD	0x0800
-+#define RB500_CF_REG_BASE	0x0800
-+#define RB500_CF_REG_ERR	0x080D
- #define RB500_CF_REG_CTRL	0x080E
- #define RB500_CF_REG_DATA	0x0C00
- 
-@@ -62,7 +64,7 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
- 	ata_sff_dma_pause(ap);
- 	ndelay(RB500_CF_IO_DELAY);
- 
--	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-+	rb532_gpio_set_ilevel(1, info->gpio_line);
- }
- 
- static void rb532_pata_exec_command(struct ata_port *ap,
-@@ -109,13 +111,15 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
- 	struct rb532_cf_info *info = ah->private_data;
- 
- 	if (gpio_get_value(info->gpio_line)) {
--		set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-+		rb532_gpio_set_ilevel(0, info->gpio_line);
- 		if (!info->frozen)
- 			ata_sff_interrupt(info->irq, dev_instance);
- 	} else {
--		set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-+		rb532_gpio_set_ilevel(1, info->gpio_line);
- 	}
- 
-+	rb532_gpio_set_istat(0, info->gpio_line);
-+
- 	return IRQ_HANDLED;
- }
- 
-@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
- 	ap->pio_mask	= 0x1f; /* PIO4 */
- 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- 
--	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_CMD;
-+	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_BASE;
- 	ap->ioaddr.ctl_addr	= info->iobase + RB500_CF_REG_CTRL;
- 	ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
- 
- 	ata_sff_std_ports(&ap->ioaddr);
- 
- 	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
-+	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
- }
- 
- static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch b/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch
deleted file mode 100644
index c8e682014c..0000000000
--- a/target/linux/rb532/patches-2.6.27/005-pata_rb532_cf_4bytes_rw.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-* rename the offset definition to avoid abiguity with the standard ATA
-  IO address
-* read and write four bytes at once like the original driver does
-* use writesl() and readsl() which implicitly iterate over the data
-
-This patch assumes buflen to be a multiple of four, which is true for
-ATA devices. ATAPI support is not known, though unlikely, as the
-original driver always transfers 512 Bytes at once.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
-Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
----
- drivers/ata/pata_rb532_cf.c |   20 +++++++++-----------
- 1 files changed, 9 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
-index 7b11f40..b919012 100644
---- a/drivers/ata/pata_rb532_cf.c
-+++ b/drivers/ata/pata_rb532_cf.c
-@@ -43,7 +43,8 @@
- #define RB500_CF_REG_BASE	0x0800
- #define RB500_CF_REG_ERR	0x080D
- #define RB500_CF_REG_CTRL	0x080E
--#define RB500_CF_REG_DATA	0x0C00
-+/* 32bit buffered data register offset */
-+#define RB500_CF_REG_DBUF32	0x0C00
- 
- struct rb532_cf_info {
- 	void __iomem	*iobase;
-@@ -74,19 +75,16 @@ static void rb532_pata_exec_command(struct ata_port *ap,
- 	rb532_pata_finish_io(ap);
- }
- 
--static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
--				unsigned int buflen, int write_data)
-+static void rb532_pata_data_xfer(struct ata_device *adev,
-+		unsigned char *buf, unsigned int buflen, int write_data)
- {
- 	struct ata_port *ap = adev->link->ap;
- 	void __iomem *ioaddr = ap->ioaddr.data_addr;
- 
--	if (write_data) {
--		for (; buflen > 0; buflen--, buf++)
--			writeb(*buf, ioaddr);
--	} else {
--		for (; buflen > 0; buflen--, buf++)
--			*buf = readb(ioaddr);
--	}
-+	if (write_data)
-+		writesl(ioaddr, buf, buflen / sizeof(u32));
-+	else
-+		readsl(ioaddr, buf, buflen / sizeof(u32));
- 
- 	rb532_pata_finish_io(adev->link->ap);
- }
-@@ -156,7 +154,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
- 
- 	ata_sff_std_ports(&ap->ioaddr);
- 
--	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
-+	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DBUF32;
- 	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
- }
- 
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch b/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch
deleted file mode 100644
index 1a7cbd0ef3..0000000000
--- a/target/linux/rb532/patches-2.6.27/006-pata_rb532_cf_fix_prototype.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Per definition, this function should return the number of bytes
-consumed. Also take care of the unlikely case when buflen is not a
-multiple of four; while transferring, the division cuts the remaining
-bytes, so alter the return value accordingly.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/ata/pata_rb532_cf.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
-index b919012..95a0d66 100644
---- a/drivers/ata/pata_rb532_cf.c
-+++ b/drivers/ata/pata_rb532_cf.c
-@@ -75,7 +75,7 @@ static void rb532_pata_exec_command(struct ata_port *ap,
- 	rb532_pata_finish_io(ap);
- }
- 
--static void rb532_pata_data_xfer(struct ata_device *adev,
-+static unsigned int rb532_pata_data_xfer(struct ata_device *adev,
- 		unsigned char *buf, unsigned int buflen, int write_data)
- {
- 	struct ata_port *ap = adev->link->ap;
-@@ -87,6 +87,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev,
- 		readsl(ioaddr, buf, buflen / sizeof(u32));
- 
- 	rb532_pata_finish_io(adev->link->ap);
-+	return buflen - (buflen % sizeof(u32));
- }
- 
- static void rb532_pata_freeze(struct ata_port *ap)
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch b/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch
deleted file mode 100644
index 5f2ed2f2f0..0000000000
--- a/target/linux/rb532/patches-2.6.27/007-cmdline_hack.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S
---- linux-2.6.27.5/arch/mips/kernel/head.S	2008-11-15 19:24:03.000000000 +0100
-+++ linux-2.6.27.5.new/arch/mips/kernel/head.S	2008-11-15 19:24:55.000000000 +0100
-@@ -123,6 +123,11 @@
- 
- 	j kernel_entry
- 	nop
-+
-+
-+EXPORT(_image_cmdline)
-+	.ascii "CMDLINE:"
-+
- #ifndef CONFIG_NO_EXCEPT_FILL
- 	/*
- 	 * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch b/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch
deleted file mode 100644
index 1db2e0ecb1..0000000000
--- a/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-The new value is the one used in the external patch before and allows at
-least a standard MTU of 1500 to be handled correctly. Impact of this
-change gets visible when bigger packets are to be received, issuing:
-| ping -s 492 <IP>
-and bigger payload sized led to 100% packet loss.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    5 ++++-
- 1 files changed, 4 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index fefb33d..e30c2f4 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -84,7 +84,10 @@
- #define KORINA_NUM_RDS	64  /* number of receive descriptors */
- #define KORINA_NUM_TDS	64  /* number of transmit descriptors */
- 
--#define KORINA_RBSIZE	536 /* size of one resource buffer = Ether MTU */
-+/* KORINA_RBSIZE is the hardware's default maximum receive
-+ * frame size in bytes. Having this hardcoded means that there
-+ * is no support for MTU sizes greater than 1500. */
-+#define KORINA_RBSIZE	1536 /* size of one resource buffer = Ether MTU */
- #define KORINA_RDS_MASK	(KORINA_NUM_RDS - 1)
- #define KORINA_TDS_MASK	(KORINA_NUM_TDS - 1)
- #define RD_RING_SIZE 	(KORINA_NUM_RDS * sizeof(struct dma_desc))
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch b/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch
deleted file mode 100644
index 4eec6fd05d..0000000000
--- a/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-Without this the driver will crash when the NIC is being restarted.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index e30c2f4..65b8487 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev)
- 
- 	korina_free_ring(dev);
- 
-+	napi_disable(&lp->napi);
-+
- 	ret = korina_init(dev);
- 	if (ret < 0) {
- 		printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
-@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev)
- 
- 	korina_free_ring(dev);
- 
-+	napi_disable(&lp->napi);
-+
- 	free_irq(lp->rx_irq, dev);
- 	free_irq(lp->tx_irq, dev);
- 	free_irq(lp->ovr_irq, dev);
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch b/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch
deleted file mode 100644
index 177678b988..0000000000
--- a/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-This function needs an early exit condition to function properly, or
-else caller assumes napi workload wasn't enough to handle all received
-packets and korina_rx is called again (and again and again and ...).
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
---- a/drivers/net/korina.c	2009-01-19 23:19:10.000000000 +0100
-+++ b/drivers/net/korina.c	2009-01-19 23:25:31.000000000 +0100
-@@ -353,15 +353,20 @@
- 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
- 	struct sk_buff *skb, *skb_new;
- 	u8 *pkt_buf;
--	u32 devcs, pkt_len, dmas, rx_free_desc;
-+	u32 devcs, pkt_len, dmas;
- 	int count;
- 
- 	dma_cache_inv((u32)rd, sizeof(*rd));
- 
- 	for (count = 0; count < limit; count++) {
-+		skb = lp->rx_skb[lp->rx_next_done];
-+		skb_new = NULL;
- 
- 		devcs = rd->devcs;
- 
-+		if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
-+			break;
-+
- 		/* Update statistics counters */
- 		if (devcs & ETH_RX_CRC)
- 			dev->stats.rx_crc_errors++;
-@@ -384,64 +389,53 @@
- 			 * in Rc32434 (errata ref #077) */
- 			dev->stats.rx_errors++;
- 			dev->stats.rx_dropped++;
--		}
--
--		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
--			/* init the var. used for the later
--			 * operations within the while loop */
--			skb_new = NULL;
-+		} else if ((devcs & ETH_RX_ROK)) {
- 			pkt_len = RCVPKT_LENGTH(devcs);
--			skb = lp->rx_skb[lp->rx_next_done];
-+			/* must be the (first and) last
-+			 * descriptor then */
-+			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-+
-+			/* invalidate the cache */
-+			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-+
-+			/* Malloc up new buffer. */
-+			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-+
-+			if (!skb_new)
-+				break;
-+			/* Do not count the CRC */
-+			skb_put(skb, pkt_len - 4);
-+			skb->protocol = eth_type_trans(skb, dev);
-+
-+			/* Pass the packet to upper layers */
-+			netif_receive_skb(skb);
-+			dev->stats.rx_packets++;
-+			dev->stats.rx_bytes += pkt_len;
-+
-+			/* Update the mcast stats */
-+			if (devcs & ETH_RX_MP)
-+				dev->stats.multicast++;
- 
--			if ((devcs & ETH_RX_ROK)) {
--				/* must be the (first and) last
--				 * descriptor then */
--				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
--
--				/* invalidate the cache */
--				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
--
--				/* Malloc up new buffer. */
--				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
--
--				if (!skb_new)
--					break;
--				/* Do not count the CRC */
--				skb_put(skb, pkt_len - 4);
--				skb->protocol = eth_type_trans(skb, dev);
--
--				/* Pass the packet to upper layers */
--				netif_receive_skb(skb);
--				dev->last_rx = jiffies;
--				dev->stats.rx_packets++;
--				dev->stats.rx_bytes += pkt_len;
--
--				/* Update the mcast stats */
--				if (devcs & ETH_RX_MP)
--					dev->stats.multicast++;
--
--				lp->rx_skb[lp->rx_next_done] = skb_new;
--			}
--
--			rd->devcs = 0;
--
--			/* Restore descriptor's curr_addr */
--			if (skb_new)
--				rd->ca = CPHYSADDR(skb_new->data);
--			else
--				rd->ca = CPHYSADDR(skb->data);
-+			lp->rx_skb[lp->rx_next_done] = skb_new;
-+		}
-+		rd->devcs = 0;
-+
-+		/* Restore descriptor's curr_addr */
-+		if (skb_new)
-+			rd->ca = CPHYSADDR(skb_new->data);
-+		else
-+			rd->ca = CPHYSADDR(skb->data);
- 
--			rd->control = DMA_COUNT(KORINA_RBSIZE) |
-+		rd->control = DMA_COUNT(KORINA_RBSIZE) |
- 				DMA_DESC_COD | DMA_DESC_IOD;
--			lp->rd_ring[(lp->rx_next_done - 1) &
--				KORINA_RDS_MASK].control &=
--				~DMA_DESC_COD;
--
--			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
--			dma_cache_wback((u32)rd, sizeof(*rd));
--			rd = &lp->rd_ring[lp->rx_next_done];
--			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
--		}
-+		lp->rd_ring[(lp->rx_next_done - 1) &
-+			KORINA_RDS_MASK].control &=
-+			~DMA_DESC_COD;
-+
-+		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
-+		dma_cache_wback((u32)rd, sizeof(*rd));
-+		rd = &lp->rd_ring[lp->rx_next_done];
-+		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
- 	}
- 
- 	dmas = readl(&lp->rx_dma_regs->dmas);
diff --git a/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch b/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch
deleted file mode 100644
index c5e1b9a40b..0000000000
--- a/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-The called netif_rx_schedule() does all the work for us:
-- it checks the return value of netif_rx_schedule_prep() and
-- if everything is ok calls __netif_rx_schedule().
-Before this change, the driver received absolutely nothing.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
---- a/drivers/net/korina.c	2009-01-19 23:26:19.000000000 +0100
-+++ b/drivers/net/korina.c	2009-01-19 23:27:06.000000000 +0100
-@@ -330,7 +330,7 @@
- 
- 	dmas = readl(&lp->rx_dma_regs->dmas);
- 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
--		netif_rx_schedule_prep(dev, &lp->napi);
-+		netif_rx_schedule(dev, &lp->napi);
- 
- 		dmasm = readl(&lp->rx_dma_regs->dmasm);
- 		writel(dmasm | (DMA_STAT_DONE |
diff --git a/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
deleted file mode 100644
index 101e869d03..0000000000
--- a/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-Triggering TX before the write to the DMA status mask register leads to
-transferring packets with maximum payload no matter what the actual
-packet size is.
-While here, also trigger RX scheduling after writing the DMA status mask
-register, like it was in the original driver before it was sent
-upstream.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
---- a/drivers/net/korina.c	2009-01-19 23:27:41.000000000 +0100
-+++ b/drivers/net/korina.c	2009-01-19 23:29:08.000000000 +0100
-@@ -330,12 +330,12 @@
- 
- 	dmas = readl(&lp->rx_dma_regs->dmas);
- 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
--		netif_rx_schedule(dev, &lp->napi);
--
- 		dmasm = readl(&lp->rx_dma_regs->dmasm);
- 		writel(dmasm | (DMA_STAT_DONE |
- 				DMA_STAT_HALT | DMA_STAT_ERR),
- 				&lp->rx_dma_regs->dmasm);
-+		
-+		netif_rx_schedule(dev, &lp->napi);
- 
- 		if (dmas & DMA_STAT_ERR)
- 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
-@@ -621,11 +621,11 @@
- 	dmas = readl(&lp->tx_dma_regs->dmas);
- 
- 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
--		korina_tx(dev);
--
- 		dmasm = readl(&lp->tx_dma_regs->dmasm);
- 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
- 				&lp->tx_dma_regs->dmasm);
-+		
-+		korina_tx(dev);
- 
- 		if (lp->tx_chain_status == desc_filled &&
- 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
diff --git a/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch b/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch
deleted file mode 100644
index 6babc3230a..0000000000
--- a/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-Originally this must have been a rewrite error when introducing
-'chain_index'. But the original driver did not use the previous chain
-item everywhere: when altering the address tx_chain_tail points to, it
-should move forward, not backwards.
-Also this is not an "index" but rather the penultimate element in the
-chain, so rename it accordingly.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |   22 +++++++++++-----------
- 1 files changed, 11 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index dced5e7..f200175 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 	struct korina_private *lp = netdev_priv(dev);
- 	unsigned long flags;
- 	u32 length;
--	u32 chain_index;
-+	u32 chain_prev, chain_next;
- 	struct dma_desc *td;
- 
- 	spin_lock_irqsave(&lp->lock, flags);
-@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 	/* Setup the transmit descriptor. */
- 	dma_cache_inv((u32) td, sizeof(*td));
- 	td->ca = CPHYSADDR(skb->data);
--	chain_index = (lp->tx_chain_tail - 1) &
--			KORINA_TDS_MASK;
-+	chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
-+	chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
- 
- 	if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
- 		if (lp->tx_chain_status == desc_empty) {
-@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 			td->control = DMA_COUNT(length) |
- 					DMA_DESC_COF | DMA_DESC_IOF;
- 			/* Move tail */
--			lp->tx_chain_tail = chain_index;
-+			lp->tx_chain_tail = chain_next;
- 			/* Write to NDPTR */
- 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
- 					&lp->tx_dma_regs->dmandptr);
-@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 			td->control = DMA_COUNT(length) |
- 					DMA_DESC_COF | DMA_DESC_IOF;
- 			/* Link to prev */
--			lp->td_ring[chain_index].control &=
-+			lp->td_ring[chain_prev].control &=
- 					~DMA_DESC_COF;
- 			/* Link to prev */
--			lp->td_ring[chain_index].link =  CPHYSADDR(td);
-+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
- 			/* Move tail */
--			lp->tx_chain_tail = chain_index;
-+			lp->tx_chain_tail = chain_next;
- 			/* Write to NDPTR */
- 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
- 					&(lp->tx_dma_regs->dmandptr));
-@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 			td->control = DMA_COUNT(length) |
- 					DMA_DESC_COF | DMA_DESC_IOF;
- 			/* Move tail */
--			lp->tx_chain_tail = chain_index;
-+			lp->tx_chain_tail = chain_next;
- 			lp->tx_chain_status = desc_filled;
- 			netif_stop_queue(dev);
- 		} else {
- 			/* Update tail */
- 			td->control = DMA_COUNT(length) |
- 					DMA_DESC_COF | DMA_DESC_IOF;
--			lp->td_ring[chain_index].control &=
-+			lp->td_ring[chain_prev].control &=
- 					~DMA_DESC_COF;
--			lp->td_ring[chain_index].link =  CPHYSADDR(td);
--			lp->tx_chain_tail = chain_index;
-+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
-+			lp->tx_chain_tail = chain_next;
- 		}
- 	}
- 	dma_cache_wback((u32) td, sizeof(*td));
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch b/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch
deleted file mode 100644
index 79ae024b64..0000000000
--- a/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Apparently this doesn't make sense. Otherwise the queue gets disabled as
-soon as it's getting empty and can only be resurrected by a driver
-restart.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    1 -
- 1 files changed, 0 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index f200175..bd33fa9 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
- 			/* Move tail */
- 			lp->tx_chain_tail = chain_next;
- 			lp->tx_chain_status = desc_filled;
--			netif_stop_queue(dev);
- 		} else {
- 			/* Update tail */
- 			td->control = DMA_COUNT(length) |
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch b/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch
deleted file mode 100644
index 74059fbeb8..0000000000
--- a/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
-IRQs". Since these IRQs' values are hardcoded and my test system doesn't
-show any shared use of IRQs at all, rather make them non-shared than
-non-disabled.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    8 ++++----
- 1 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index bd33fa9..1d6e48e 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev)
- 	 * that handles the Done Finished
- 	 * Ovr and Und Events */
- 	ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
--		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
-+			IRQF_DISABLED, "Korina ethernet Rx", dev);
- 	if (ret < 0) {
- 		printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
- 		    dev->name, lp->rx_irq);
- 		goto err_release;
- 	}
- 	ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
--		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
-+			IRQF_DISABLED, "Korina ethernet Tx", dev);
- 	if (ret < 0) {
- 		printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
- 		    dev->name, lp->tx_irq);
-@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev)
- 
- 	/* Install handler for overrun error. */
- 	ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
--			IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
-+			IRQF_DISABLED, "Ethernet Overflow", dev);
- 	if (ret < 0) {
- 		printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
- 		    dev->name, lp->ovr_irq);
-@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev)
- 
- 	/* Install handler for underflow error. */
- 	ret = request_irq(lp->und_irq, &korina_und_interrupt,
--			IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
-+			IRQF_DISABLED, "Ethernet Underflow", dev);
- 	if (ret < 0) {
- 		printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
- 		    dev->name, lp->und_irq);
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch b/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch
deleted file mode 100644
index ab82cb5afa..0000000000
--- a/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-As the assigned value is being overwritten shortly after, it can be
-dropped and so the whole variable definition moved to the start of the
-function.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    3 +--
- 1 files changed, 1 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index 60ae7bf..75010ca 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
- static void korina_alloc_ring(struct net_device *dev)
- {
- 	struct korina_private *lp = netdev_priv(dev);
-+	struct sk_buff *skb;
- 	int i;
- 
- 	/* Initialize the transmit descriptors */
-@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
- 
- 	/* Initialize the receive descriptors */
- 	for (i = 0; i < KORINA_NUM_RDS; i++) {
--		struct sk_buff *skb = lp->rx_skb[i];
--
- 		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
- 		if (!skb)
- 			break;
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch b/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch
deleted file mode 100644
index 0484f2cbe5..0000000000
--- a/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-After the last loop iteration, i has the value RC32434_NUM_RDS and
-therefore leads to an index overflow when used afterwards to address the
-last element. This is yet another another bug introduced when rewriting
-parts of the driver for upstream preparation, as the original driver
-used 'RC32434_NUM_RDS - 1' instead.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index 1d6e48e..67fbdf4 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev)
- 		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
- 	}
- 
--	/* loop back */
--	lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
--	lp->rx_next_done  = 0;
-+	/* loop back receive descriptors, so the last
-+	 * descriptor points to the first one */
-+	lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
-+	lp->rd_ring[i - 1].control |= DMA_DESC_COD;
- 
--	lp->rd_ring[i].control |= DMA_DESC_COD;
-+	lp->rx_next_done  = 0;
- 	lp->rx_chain_head = 0;
- 	lp->rx_chain_tail = 0;
- 	lp->rx_chain_status = desc_empty;
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch b/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch
deleted file mode 100644
index f9f8daccc0..0000000000
--- a/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-This is copy and paste from the original driver. As skb_reserve() is
-also called within korina_alloc_ring() when initially allocating the
-receive descriptors, the same should be done when allocating new space
-after passing an skb to upper layers.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index 67fbdf4..60ae7bf 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
- 			if (devcs & ETH_RX_MP)
- 				dev->stats.multicast++;
- 
-+			/* 16 bit align */
-+			skb_reserve(skb_new, 2);
-+
- 			lp->rx_skb[lp->rx_next_done] = skb_new;
- 		}
- 
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch b/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch
deleted file mode 100644
index bec3514885..0000000000
--- a/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-I'm not sure if this is necessary, but the original driver did it and
-apparently also many other drivers do it, so it should not be completely
-wrong to do it.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- drivers/net/korina.c |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/net/korina.c b/drivers/net/korina.c
-index 75010ca..56b4db2 100644
---- a/drivers/net/korina.c
-+++ b/drivers/net/korina.c
-@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit)
- 			/* 16 bit align */
- 			skb_reserve(skb_new, 2);
- 
-+			skb_new->dev = dev;
- 			lp->rx_skb[lp->rx_next_done] = skb_new;
- 		}
- 
-@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev)
- 		if (!skb)
- 			break;
- 		skb_reserve(skb, 2);
-+		skb->dev = dev;
- 		lp->rx_skb[i] = skb;
- 		lp->rd_ring[i].control = DMA_DESC_IOD |
- 				DMA_COUNT(KORINA_RBSIZE);
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch b/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch
deleted file mode 100644
index e61ec8330a..0000000000
--- a/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -urN linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c
---- linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c	2008-11-07 18:55:34.000000000 +0100
-+++ linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c	2008-11-15 22:06:28.000000000 +0100
-@@ -261,7 +261,7 @@
- 	int ret;
- 	struct resource *r;
- 
--	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
-+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
- 	if (!r) {
- 		printk(KERN_ERR KBUILD_MODNAME
- 			"failed to retrieve resources\n");
diff --git a/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch b/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch
deleted file mode 100644
index 9aaeef3349..0000000000
--- a/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-As the korina ethernet driver uses platform_get_drvdata() to extract the
-driver specific data from the platform device, driver_data has to be
-used here.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- arch/mips/rb532/devices.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
-index 9b6b744..3c74561 100644
---- a/arch/mips/rb532/devices.c
-+++ b/arch/mips/rb532/devices.c
-@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = {
- static struct platform_device korina_dev0 = {
- 	.id = -1,
- 	.name = "korina",
--	.dev.platform_data = &korina_dev0_data,
-+	.dev.driver_data = &korina_dev0_data,
- 	.resource = korina_dev0_res,
- 	.num_resources = ARRAY_SIZE(korina_dev0_res),
- };
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch b/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch
deleted file mode 100644
index ae42a4dbc5..0000000000
--- a/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-Auto-detection works just fine, so use it instead of specifying the type
-manually. Also define a platform device for the uart, as suggested by
-David Daney.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
- arch/mips/rb532/devices.c |   26 ++++++++++++++++++++++++++
- arch/mips/rb532/serial.c  |    2 +-
- 2 files changed, 27 insertions(+), 1 deletions(-)
-
-diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
-index c1c2918..9b6b744 100644
---- a/arch/mips/rb532/devices.c
-+++ b/arch/mips/rb532/devices.c
-@@ -24,6 +24,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/serial_8250.h>
- 
- #include <asm/bootinfo.h>
- 
-@@ -39,6 +40,8 @@
- #define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
- #define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
- 
-+extern unsigned int idt_cpu_freq;
-+
- static struct resource korina_dev0_res[] = {
- 	{
- 		.name = "korina_regs",
-@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = {
- 	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
- };
- 
-+static struct plat_serial8250_port rb532_uart_res[] = {
-+	{
-+		.membase	= (char *)KSEG1ADDR(REGBASE + UART0BASE),
-+		.irq		= UART0_IRQ,
-+		.regshift	= 2,
-+		.iotype		= UPIO_MEM,
-+		.flags		= UPF_BOOT_AUTOCONF,
-+	},
-+	{
-+		.flags		= 0,
-+	}
-+};
-+
-+static struct platform_device rb532_uart = {
-+	.name              = "serial8250",
-+	.id                = PLAT8250_DEV_PLATFORM,
-+	.dev.platform_data = &rb532_uart_res,
-+};
-+
- static struct platform_device *rb532_devs[] = {
- 	&korina_dev0,
- 	&nand_slot0,
- 	&cf_slot0,
- 	&rb532_led,
- 	&rb532_button,
-+	&rb532_uart,
- 	&rb532_wdt
- };
- 
-@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void)
- 	/* Initialise the NAND device */
- 	rb532_nand_setup();
- 
-+	/* set the uart clock to the current cpu frequency */
-+	rb532_uart_res[0].uartclk = idt_cpu_freq;
-+
- 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
- }
- 
-diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
-index 3e0d7ec..00ed19f 100644
---- a/arch/mips/rb532/serial.c
-+++ b/arch/mips/rb532/serial.c
-@@ -36,7 +36,7 @@
- extern unsigned int idt_cpu_freq;
- 
- static struct uart_port rb532_uart = {
--	.type = PORT_16550A,
-+	.flags = UPF_BOOT_AUTOCONF,
- 	.line = 0,
- 	.irq = UART0_IRQ,
- 	.iotype = UPIO_MEM,
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch b/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
deleted file mode 100644
index 64a6d8934e..0000000000
--- a/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-This register just contains the address of the actual resource, so
-initialisation has to be the same as cf_slot0_res and nand_slot0_res.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
-diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
-index d75eb19..40deb11 100644
---- a/arch/mips/rb532/gpio.c
-+++ b/arch/mips/rb532/gpio.c
-@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = {
- static struct resource rb532_dev3_ctl_res[] = {
- 	{
- 		.name	= "dev3_ctl",
--		.start	= REGBASE + DEV3BASE,
--		.end	= REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
- 		.flags	= IORESOURCE_MEM,
- 	}
- };
-@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void)
- 	/* Register our GPIO chip */
- 	gpiochip_add(&rb532_gpio_chip->chip);
- 
-+	rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
-+	rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
-+
- 	r = rb532_dev3_ctl_res;
- 	dev3.base = ioremap_nocache(r->start, r->end - r->start);
- 
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch b/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch
deleted file mode 100644
index fc0c77ec25..0000000000
--- a/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-The data to be written is just a byte, so use writeb instead of writel.
-Also, dev3.base contains the address, not the data so referencing here
-is wrong.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
-diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
-index 40deb11..7e0cb4f 100644
---- a/arch/mips/rb532/gpio.c
-+++ b/arch/mips/rb532/gpio.c
-@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
- 	spin_lock_irqsave(&dev3.lock, flags);
- 
- 	dev3.state = (dev3.state | or_mask) & ~nand_mask;
--	writel(dev3.state, &dev3.base);
-+	writeb(dev3.state, dev3.base);
- 
- 	spin_unlock_irqrestore(&dev3.lock, flags);
- }
--- 
-1.5.6.4
-
-
diff --git a/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch
deleted file mode 100644
index 7091609803..0000000000
--- a/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/rb532/devices.c	2009-01-25 13:36:15.000000000 +0100
-+++ b/arch/mips/rb532/devices.c	2009-01-25 14:00:56.000000000 +0100
-@@ -119,6 +119,19 @@
- };
- 
- /* Resources and device for NAND */
-+
-+/*
-+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
-+ * will not be able to find the kernel that we load.  So set the oobinfo
-+ * when creating the partitions
-+ */
-+static struct nand_ecclayout rb532_nand_ecclayout = {
-+	.eccbytes       = 6,
-+	.eccpos         = { 8, 9, 10, 13, 14, 15 },
-+	.oobavail       = 9,
-+	.oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
- static int rb532_dev_ready(struct mtd_info *mtd)
- {
- 	return gpio_get_value(GPIO_RDY);
-@@ -277,6 +290,16 @@
- /* NAND definitions */
- #define NAND_CHIP_DELAY	25
- 
-+static int rb532_nand_fixup(struct mtd_info *mtd)
-+{
-+	struct nand_chip *chip = mtd->priv;
-+
-+	if (mtd->writesize == 512)
-+		chip->ecc.layout = &rb532_nand_ecclayout;
-+
-+	return 0;
-+}
-+
- static void __init rb532_nand_setup(void)
- {
- 	switch (mips_machtype) {
-@@ -296,6 +319,8 @@
- 	rb532_nand_data.chip.partitions = rb532_partition_info;
- 	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
- 	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
-+	
-+	rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup;
- }
- 
-