[ramips] add Ralink V11ST-FE board support

This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73

11 files changed, 134 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 262160490e..b167c520bd 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -69,6 +69,9 @@ get_status_led() {
 	rt-n56u)
 		status_led="asus:blue:power"
 		;;
+	v11st-fe)
+		status_led="v11st-fe:green:status"
+		;;
 	v22rw-2x2)
 		status_led="v22rw-2x2:green:security"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 65b2cd39c8..5e6fa420d7 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -58,6 +58,7 @@ case "$FIRMWARE" in
 	nw718 | \
 	omni-emb | \
 	rt-n15 | \
+	v11st-fe | \
 	v22rw-2x2 | \
 	w502u | \
 	wcr-150gn | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index bcd17f9d04..891a1a7b3c 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -60,6 +60,9 @@ case $board in
 	nw718)
 		set_usb_led "nw718:amber:usb"
 		;;
+	v11st-fe)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	w502u)
 		set_usb_led "alfa:blue:usb"
 		set_wifi_led "rt2800pci-phy0::radio"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 0f97bc3647..a36341ca15 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -50,6 +50,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "4 8t"
 		;;
 
+	v11st-fe)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+		ucidef_add_switch_vlan "switch0" "2" "0 5t"
+		;;
+
 	wcr-150gn)
 		ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 9c1a7dcb57..07bdf16051 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -122,6 +122,9 @@ ramips_board_name() {
 	*"Sitecom WL-351 v1 002")
 		name="wl-351"
 		;;
+	*"Ralink V11ST-FE")
+		name="v11st-fe"
+		;;
 	*"WLI-TX4-AG300N")
 		name="wli-tx4-ag300n"
 		;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index fa6d985665..d6c991133f 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -16,6 +16,7 @@ enum ramips_mach_type {
 	/* RT2880 based machines */
 	RAMIPS_MACH_F5D8235_V1,		/* Belkin F5D8235 v1 */
 	RAMIPS_MACH_RT_N15,		/* Asus RT-N15 */
+	RAMIPS_MACH_V11ST_FE,		/* Ralink V11ST-FE */
 	RAMIPS_MACH_WLI_TX4_AG300N,	/* Buffalo WLI-TX4-AG300N */
 	RAMIPS_MACH_WZR_AGL300NH,	/* Buffalo WZR-AGL300NH */
 
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
index 4189d9eef0..a2593e8850 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
@@ -11,6 +11,11 @@ config RT288X_MACH_RT_N15
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT288X_MACH_V11ST_FE
+	bool "Ralink V11ST-FE board support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT288X_MACH_WLI_TX4_AG300N
 	bool "Buffalo WLI-TX4-AG300N board support"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
index 5205706f3c..473f855998 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 
 obj-$(CONFIG_RT288X_MACH_F5D8235_V1)	+= mach-f5d8235-v1.o
 obj-$(CONFIG_RT288X_MACH_RT_N15)	+= mach-rt-n15.o
+obj-$(CONFIG_RT288X_MACH_V11ST_FE)	+= mach-v11st-fe.o
 obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
 obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH)	+= mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c
new file mode 100644
index 0000000000..6314680864
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c
@@ -0,0 +1,106 @@
+/*
+ *  Ralink V11ST-FE board support
+ *
+ *  Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define V11ST_FE_GPIO_STATUS_LED	12
+#define V11ST_FE_GPIO_BUTTON_WPS	0
+
+#define V11ST_FE_KEYS_POLL_INTERVAL	20
+#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL	(3 * V11ST_FE_KEYS_POLL_INTERVAL)
+
+static struct gpio_led v11st_fe_leds_gpio[] __initdata = {
+	{
+		.name		= "v11st-fe:green:status",
+		.gpio		= V11ST_FE_GPIO_STATUS_LED,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = {
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= V11ST_FE_GPIO_BUTTON_WPS,
+	}
+};
+
+static struct mtd_partition v11st_fe_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "u-boot-env",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size   = 0x140000,
+	}, {
+		.name	= "rootfs",
+		.offset = 0x190000,
+		.size   = 0x210000,
+	}
+};
+
+static void __init rt_v11st_fe_init(void)
+{
+	rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+
+	rt288x_flash0_data.nr_parts = ARRAY_SIZE(v11st_fe_partitions);
+	rt288x_flash0_data.parts = v11st_fe_partitions;
+	rt288x_register_flash(0);
+
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio),
+				  v11st_fe_leds_gpio);
+
+	ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(v11st_fe_gpio_buttons),
+				     v11st_fe_gpio_buttons);
+
+	rt288x_register_wifi();
+
+	/* Board is connected to an IC+ IP175C Fast Ethernet switch */
+	rt288x_eth_data.speed = SPEED_100;
+	rt288x_eth_data.duplex = DUPLEX_FULL;
+	rt288x_eth_data.tx_fc = 1;
+	rt288x_eth_data.rx_fc = 1;
+	rt288x_eth_data.phy_mask = BIT(0);
+	rt288x_register_ethernet();
+
+	rt288x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init);
diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39
index aaed397469..a84d5cac0b 100644
--- a/target/linux/ramips/rt288x/config-2.6.39
+++ b/target/linux/ramips/rt288x/config-2.6.39
@@ -63,6 +63,7 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
 # CONFIG_LEDS_GPIO is not set
 CONFIG_MACH_NO_WESTBRIDGE=y
@@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_V11ST_FE=y
 CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
 CONFIG_RTL8366S_PHY=y
diff --git a/target/linux/ramips/rt288x/config-3.2 b/target/linux/ramips/rt288x/config-3.2
index 186950cab7..1ae35b5bb9 100644
--- a/target/linux/ramips/rt288x/config-3.2
+++ b/target/linux/ramips/rt288x/config-3.2
@@ -61,6 +61,7 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_LANTIQ is not set
@@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_V11ST_FE=y
 CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
 CONFIG_RTL8366S_PHY=y