[ramips] add patches for v3.8

Signed-off-by: John Crsipin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36163 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 405 insertions, 0 deletions

diff --git a/target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch b/target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch
new file mode 100644
index 0000000000..20f9b71bf3
--- /dev/null
+++ b/target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch
@@ -0,0 +1,405 @@
+From 8dd2c6ae6d9c858d9c4c4d55aa4bf180669ddfe9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 22 Jan 2013 18:23:50 +0100
+Subject: [PATCH 121/121] watchdog: adds ralink wdt
+
+Adds the watchdog driver for ralink SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/watchdog/Kconfig      |    6 +
+ drivers/watchdog/Makefile     |    1 +
+ drivers/watchdog/ralink_wdt.c |  352 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 359 insertions(+)
+ create mode 100644 drivers/watchdog/ralink_wdt.c
+
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 9fcc70c..c4b508e 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1104,6 +1104,12 @@ config LANTIQ_WDT
+ 	help
+ 	  Hardware driver for the Lantiq SoC Watchdog Timer.
+ 
++config RALINK_WDT
++	tristate "Ralink SoC watchdog"
++	depends on RALINK
++	help
++	  Hardware driver for the Ralink SoC Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index a300b94..3a8ad6a 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -134,6 +134,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
++obj-$(CONFIG_RALINK_WDT) += ralink_wdt.o
+ 
+ # PARISC Architecture
+ 
+diff --git a/drivers/watchdog/ralink_wdt.c b/drivers/watchdog/ralink_wdt.c
+new file mode 100644
+index 0000000..8a8dc76
+--- /dev/null
++++ b/drivers/watchdog/ralink_wdt.c
+@@ -0,0 +1,352 @@
++/*
++ * Ralink RT288X/RT305X built-in hardware watchdog timer
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
++ *	Author: Deepak Saxena <dsaxena@plexity.net>
++ *	Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * which again was based on sa1100 driver,
++ *	Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
++ *
++ * parts of the driver are based on Ralink's 2.6.21 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/bitops.h>
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/watchdog.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++
++#define DRIVER_NAME	"ralink-wdt"
++
++#define RALINK_WDT_TIMEOUT		30	/* seconds */
++#define RALINK_WDT_PRESCALE		65536
++
++#define TIMER_REG_TMR1LOAD		0x00
++#define TIMER_REG_TMR1CTL		0x08
++
++#define TMRSTAT_TMR1RST			BIT(5)
++
++#define TMR1CTL_ENABLE			BIT(7)
++#define TMR1CTL_MODE_SHIFT		4
++#define TMR1CTL_MODE_MASK		0x3
++#define TMR1CTL_MODE_FREE_RUNNING	0x0
++#define TMR1CTL_MODE_PERIODIC		0x1
++#define TMR1CTL_MODE_TIMEOUT		0x2
++#define TMR1CTL_MODE_WDT		0x3
++#define TMR1CTL_PRESCALE_MASK		0xf
++#define TMR1CTL_PRESCALE_65536		0xf
++
++static int nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
++			   "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static int ralink_wdt_timeout = RALINK_WDT_TIMEOUT;
++module_param_named(timeout, ralink_wdt_timeout, int, 0);
++MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, 0 means use maximum "
++			  "(default=" __MODULE_STRING(RALINK_WDT_TIMEOUT) "s)");
++
++static unsigned long ralink_wdt_flags;
++
++#define WDT_FLAGS_BUSY		0
++#define WDT_FLAGS_EXPECT_CLOSE	1
++
++static struct clk *ralink_wdt_clk;
++static unsigned long ralink_wdt_freq;
++static int ralink_wdt_max_timeout;
++static void __iomem *ralink_wdt_base;
++
++static inline void rt_wdt_w32(unsigned reg, u32 val)
++{
++	__raw_writel(val, ralink_wdt_base + reg);
++}
++
++static inline u32 rt_wdt_r32(unsigned reg)
++{
++	return __raw_readl(ralink_wdt_base + reg);
++}
++
++static inline void ralink_wdt_keepalive(void)
++{
++	rt_wdt_w32(TIMER_REG_TMR1LOAD, ralink_wdt_timeout * ralink_wdt_freq);
++}
++
++static inline void ralink_wdt_enable(void)
++{
++	u32 t;
++
++	ralink_wdt_keepalive();
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t |= TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++}
++
++static inline void ralink_wdt_disable(void)
++{
++	u32 t;
++
++	ralink_wdt_keepalive();
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~TMR1CTL_ENABLE;
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++}
++
++static int ralink_wdt_set_timeout(int val)
++{
++	if (val < 1 || val > ralink_wdt_max_timeout) {
++		pr_warn(DRIVER_NAME
++			": timeout value %d must be 0 < timeout <= %d, using %d\n",
++			val, ralink_wdt_max_timeout, ralink_wdt_timeout);
++		return -EINVAL;
++	}
++
++	ralink_wdt_timeout = val;
++	ralink_wdt_keepalive();
++
++	return 0;
++}
++
++static int ralink_wdt_open(struct inode *inode, struct file *file)
++{
++	u32 t;
++
++	if (test_and_set_bit(WDT_FLAGS_BUSY, &ralink_wdt_flags))
++		return -EBUSY;
++
++	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
++
++	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++	t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
++	       TMR1CTL_PRESCALE_MASK);
++	t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
++	      TMR1CTL_PRESCALE_65536);
++	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++	ralink_wdt_enable();
++
++	return nonseekable_open(inode, file);
++}
++
++static int ralink_wdt_release(struct inode *inode, struct file *file)
++{
++	if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags))
++		ralink_wdt_disable();
++	else {
++		pr_crit(DRIVER_NAME ": device closed unexpectedly, "
++			"watchdog timer will not stop!\n");
++		ralink_wdt_keepalive();
++	}
++
++	clear_bit(WDT_FLAGS_BUSY, &ralink_wdt_flags);
++	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
++
++	return 0;
++}
++
++static ssize_t rt_wdt_w32ite(struct file *file, const char *data,
++				size_t len, loff_t *ppos)
++{
++	if (len) {
++		if (!nowayout) {
++			size_t i;
++
++			clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ralink_wdt_flags);
++
++			for (i = 0; i != len; i++) {
++				char c;
++
++				if (get_user(c, data + i))
++					return -EFAULT;
++
++				if (c == 'V')
++					set_bit(WDT_FLAGS_EXPECT_CLOSE,
++						&ralink_wdt_flags);
++			}
++		}
++
++		ralink_wdt_keepalive();
++	}
++
++	return len;
++}
++
++static const struct watchdog_info ralink_wdt_info = {
++	.options		= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
++				  WDIOF_MAGICCLOSE,
++	.firmware_version	= 0,
++	.identity		= "RALINK watchdog",
++};
++
++static long ralink_wdt_ioctl(struct file *file, unsigned int cmd,
++			    unsigned long arg)
++{
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++	int err;
++	int t;
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		err = copy_to_user(argp, &ralink_wdt_info,
++				   sizeof(ralink_wdt_info)) ? -EFAULT : 0;
++		break;
++
++	case WDIOC_GETSTATUS:
++		err = put_user(0, p);
++		break;
++
++	case WDIOC_KEEPALIVE:
++		ralink_wdt_keepalive();
++		err = 0;
++		break;
++
++	case WDIOC_SETTIMEOUT:
++		err = get_user(t, p);
++		if (err)
++			break;
++
++		err = ralink_wdt_set_timeout(t);
++		if (err)
++			break;
++
++		/* fallthrough */
++	case WDIOC_GETTIMEOUT:
++		err = put_user(ralink_wdt_timeout, p);
++		break;
++
++	default:
++		err = -ENOTTY;
++		break;
++	}
++
++	return err;
++}
++
++static const struct file_operations ralink_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= rt_wdt_w32ite,
++	.unlocked_ioctl	= ralink_wdt_ioctl,
++	.open		= ralink_wdt_open,
++	.release	= ralink_wdt_release,
++};
++
++static struct miscdevice ralink_wdt_miscdev = {
++	.minor = WATCHDOG_MINOR,
++	.name = "watchdog",
++	.fops = &ralink_wdt_fops,
++};
++
++static int ralink_wdt_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	int err;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource found\n");
++		return -EINVAL;
++	}
++
++	ralink_wdt_base = ioremap(res->start, resource_size(res));
++	if (!ralink_wdt_base)
++		return -ENOMEM;
++
++	ralink_wdt_clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(ralink_wdt_clk)) {
++		err = PTR_ERR(ralink_wdt_clk);
++		goto err_unmap;
++	}
++
++	err = clk_enable(ralink_wdt_clk);
++	if (err)
++		goto err_clk_put;
++
++	ralink_wdt_freq = clk_get_rate(ralink_wdt_clk) / RALINK_WDT_PRESCALE;
++	if (!ralink_wdt_freq) {
++		err = -EINVAL;
++		goto err_clk_disable;
++	}
++
++	ralink_wdt_max_timeout = (0xfffful / ralink_wdt_freq);
++	if (ralink_wdt_timeout < 1 ||
++	    ralink_wdt_timeout > ralink_wdt_max_timeout) {
++		ralink_wdt_timeout = ralink_wdt_max_timeout;
++		dev_info(&pdev->dev,
++			"timeout value must be 0 < timeout <= %d, using %d\n",
++			ralink_wdt_max_timeout, ralink_wdt_timeout);
++	}
++
++	err = misc_register(&ralink_wdt_miscdev);
++	if (err) {
++		dev_err(&pdev->dev,
++			"unable to register misc device, err=%d\n", err);
++		goto err_clk_disable;
++	}
++
++	return 0;
++
++err_clk_disable:
++	clk_disable(ralink_wdt_clk);
++err_clk_put:
++	clk_put(ralink_wdt_clk);
++err_unmap:
++	iounmap(ralink_wdt_base);
++	return err;
++}
++
++static int ralink_wdt_remove(struct platform_device *pdev)
++{
++	misc_deregister(&ralink_wdt_miscdev);
++	clk_disable(ralink_wdt_clk);
++	clk_put(ralink_wdt_clk);
++	iounmap(ralink_wdt_base);
++	return 0;
++}
++
++static void ralink_wdt_shutdown(struct platform_device *pdev)
++{
++	ralink_wdt_disable();
++}
++
++static const struct of_device_id ralink_wdt_match[] = {
++	{ .compatible = "ralink,rt2880-wdt" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_wdt_match);
++
++static struct platform_driver ralink_wdt_driver = {
++	.probe		= ralink_wdt_probe,
++	.remove		= ralink_wdt_remove,
++	.shutdown	= ralink_wdt_shutdown,
++	.driver		= {
++		.name		= DRIVER_NAME,
++		.owner		= THIS_MODULE,
++		.of_match_table	= ralink_wdt_match,
++	},
++};
++
++module_platform_driver(ralink_wdt_driver);
++
++MODULE_DESCRIPTION("MediaTek/Ralink RT288X/RT305X hardware watchdog driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRIVER_NAME);
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+-- 
+1.7.10.4
+