rename target/linux/package/openwrt to base-files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2261 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 324 insertions, 0 deletions

diff --git a/target/linux/package/base-files/files/ar7-2.4/etc/config/network b/target/linux/package/base-files/files/ar7-2.4/etc/config/network
new file mode 100644
index 0000000000..9487a7426f
--- /dev/null
+++ b/target/linux/package/base-files/files/ar7-2.4/etc/config/network
@@ -0,0 +1,31 @@
+# Network configuration file
+# Uncomment the following statements to change the network configuration
+
+## LAN configuration
+# lan_ifname="br0"
+# lan_proto="static"
+# lan_ipaddr="192.168.1.1"
+# lan_netmask="255.255.255.0"
+# lan_gateway=""
+# lan_dns=""
+
+## WAN configuration (PPPoE)
+# wan_proto=pppoe
+# wan_ifname=ppp0
+# pppoe_atm=1
+# pppoe_ifname=nas0
+# atm_vpi=8
+# atm_vci=35
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+# ppp_mtu=1492
+
+## WAN configuration (PPPoA)
+# wan_proto=pppoa
+# wan_ifname=ppp0
+# atm_vpi=8
+# atm_vci=35
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+# ppp_mtu=1500
+
diff --git a/target/linux/package/base-files/files/ar7-2.4/etc/network.overrides b/target/linux/package/base-files/files/ar7-2.4/etc/network.overrides
new file mode 100644
index 0000000000..9aa74aa934
--- /dev/null
+++ b/target/linux/package/base-files/files/ar7-2.4/etc/network.overrides
@@ -0,0 +1,28 @@
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+DEFAULT_lan_proto="static"
+DEFAULT_lan_ifname="br0"
+DEFAULT_lan_ifnames="eth0"
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=`echo $(strings /dev/mtdblock/3 | grep -A1 maca | grep :)`
+DEFAULT_lan_hwaddr=${DEFAULT_lan_hwaddr##* }
+DEFAULT_lan_hwaddr=${DEFAULT_lan_hwaddr:-${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}}
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+  echo "### YOU ARE IN FAILSAFE MODE ####"
+  lan_ifname=${DEFAULT_lan_proto}
+  lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
+  lan_ipaddr=$DEFAULT_lan_ipaddr
+  lan_netmask=$DEFAULT_lan_netmask
+  lan_hwaddr=$DEFAULT_lan_hwaddr
+  wan_ifname="none"
+  wifi_ifname="none"
+}
diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/config/network b/target/linux/package/base-files/files/brcm-2.4/etc/config/network
new file mode 100644
index 0000000000..ee8e02043a
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.4/etc/config/network
@@ -0,0 +1,18 @@
+# Network configuration file
+# Uncomment the following statements to override the default or nvram config
+
+## LAN configuration
+# lan_ifname="br0"
+# lan_proto="static"
+# lan_ipaddr="192.168.1.1"
+# lan_netmask="255.255.255.0"
+# lan_gateway=""
+# lan_dns=""
+
+## WAN configuration (PPPoE)
+# wan_proto=pppoe
+# wan_ifname=ppp0
+# pppoe_ifname=vlan1
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+# ppp_mtu=1492
diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
new file mode 100755
index 0000000000..0d1300b964
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
@@ -0,0 +1,102 @@
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+. /etc/network.overrides
+alias debug=${DEBUG:-:}
+
+remap () {
+  for type in lan wifi wan pppoe
+  do
+    for s in '' s
+    do
+      eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" 
+    done
+  done
+}
+
+nvram_default() {
+  [ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+# linksys bug; remove when not using static configuration for lan
+nvram set lan_proto="static"
+
+# hacks for wrt54g 1.x hardware
+[  "$(nvram get boardnum)"  = "42" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+  debug "### wrt54g 1.x hack ###"
+  nvram set vlan1hwname="et0"
+  nvram set vlan2hwname="et0"
+  remap eth0 vlan2
+  remap eth1 vlan1
+}
+
+# hacks for asus wl-500g deluxe
+[  "$(nvram get boardtype)" = "bcm95365r" \
+-a "$(nvram get boardnum)" = "45" ] && {
+  debug "### wl-500g deluxe hacks ###"
+  nvram set vlan0hwname="et0"
+  nvram set vlan1hwname="et0"
+  remap eth0.1 vlan0
+  remap eth0 vlan1
+
+  # set up the vlan*ports variables for the asus wl-500g deluxe
+  # if they don't already exist 
+  nvram_default vlan0ports "1 2 3 4 5*"
+  nvram_default vlan1ports "0 5"
+}
+
+# hacks for asus wl-300g
+[ "$(nvram get productid)" = "WL300g" ] && {
+  debug "### wl-300g hacks ###"
+  nvram set lan_ifnames="eth0 eth2"
+  nvram set wan_ifname="none"
+}
+
+# hacks for asus wl-hdd
+[ "$(nvram get productid)" = "WLHDD" ] && {
+  debug "### wl-hdd hacks ###"
+  nvram set lan_ifnames="eth1 eth2"
+  nvram set wan_ifname="none"
+}
+
+# hacks for wap54g hardware
+[  "$(nvram get boardnum)" = "2" \
+-o "$(nvram get boardnum)" = "1024" ] && {
+  debug "### wap54g hack ###"
+  nvram set wan_ifname="none"
+}
+
+# hacks for buffalo wla2-g54l
+[  "$(nvram get boardnum)" = "00" \
+-a "$(nvram get product_name)" = "Product_name" \
+-o "$(nvram get product_name)" = "WLA2-G54L" ] && {
+  debug "### wla2-g54l hacks ###"
+  nvram set wan_ifname="none"
+  nvram set lan_ifnames="vlan0"
+}
+
+# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2
+[ \! -z "$(nvram get boardrev)" ] && {
+  nvram set wl0id=0x4320
+}
+
+# defaults
+nvram_default lan_ifname "br0"
+nvram_default lan_ifnames "$FAILSAFE_ifnames"
+
+nvram_default wan_ifname "vlan1"
+nvram_default wan_proto "dhcp"
+
+nvram_default wl0_ssid OpenWrt
+nvram_default wl0_mode ap
+nvram_default wl0_infra 1
+nvram_default wl0_radio 1
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+  # if default wifi mac, set two higher than the lan mac
+  nvram set il0macaddr=$(nvram get et0macaddr|
+  awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
+
diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides b/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides
new file mode 100644
index 0000000000..dc3abcaebd
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.4/etc/network.overrides
@@ -0,0 +1,41 @@
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+# hacks for wrt54g 1.x hardware
+[  "$(nvram get boardnum)"  = "42" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan0 vlan2 eth2"
+
+# hacks for asus wl-500g deluxe
+[  "$(nvram get boardtype)" = "bcm95365r" \
+-a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
+
+# hacks for wap54g hardware
+[  "$(nvram get boardnum)" = "2" \
+-o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
+
+# hack for asus wl-500g hardware
+[ "$(nvram get boardnum)" = "asusX" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
+  
+FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 eth1 eth2"}
+
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+  echo "### YOU ARE IN FAILSAFE MODE ####"
+  NVRAM_lan_ifname="br0"
+  NVRAM_lan_ifnames=$FAILSAFE_ifnames
+  NVRAM_lan_ipaddr=DEFAULT_lan_ipaddr
+  NVRAM_lan_netmask=DEFAULT_lan_netmask
+  NVRAM_lan_hwaddr=DEFAULT_lan_hwaddr
+  NVRAM_wan_ifname="none"
+  NVRAM_wifi_ifname="none"
+}
diff --git a/target/linux/package/base-files/files/brcm-2.6/etc/config/network b/target/linux/package/base-files/files/brcm-2.6/etc/config/network
new file mode 100644
index 0000000000..9487a7426f
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.6/etc/config/network
@@ -0,0 +1,31 @@
+# Network configuration file
+# Uncomment the following statements to change the network configuration
+
+## LAN configuration
+# lan_ifname="br0"
+# lan_proto="static"
+# lan_ipaddr="192.168.1.1"
+# lan_netmask="255.255.255.0"
+# lan_gateway=""
+# lan_dns=""
+
+## WAN configuration (PPPoE)
+# wan_proto=pppoe
+# wan_ifname=ppp0
+# pppoe_atm=1
+# pppoe_ifname=nas0
+# atm_vpi=8
+# atm_vci=35
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+# ppp_mtu=1492
+
+## WAN configuration (PPPoA)
+# wan_proto=pppoa
+# wan_ifname=ppp0
+# atm_vpi=8
+# atm_vci=35
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+# ppp_mtu=1500
+
diff --git a/target/linux/package/base-files/files/brcm-2.6/etc/inittab b/target/linux/package/base-files/files/brcm-2.6/etc/inittab
new file mode 100644
index 0000000000..3cbbe5af27
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.6/etc/inittab
@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS
+::shutdown:/sbin/halt
+tts/0::askfirst:/bin/ash --login
+tts/1::askfirst:/bin/ash --login
diff --git a/target/linux/package/base-files/files/brcm-2.6/etc/network.overrides b/target/linux/package/base-files/files/brcm-2.6/etc/network.overrides
new file mode 100644
index 0000000000..ded748b260
--- /dev/null
+++ b/target/linux/package/base-files/files/brcm-2.6/etc/network.overrides
@@ -0,0 +1,31 @@
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+DEFAULT_lan_proto="static"
+DEFAULT_lan_ifname="br0"
+DEFAULT_lan_ifnames="vlan0 ath0"
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=${DEFAULT_lan_hwaddr:-${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}}
+DEFAULT_vlan0hwname="et0"
+DEFAULT_vlan1hwname="et0"
+DEFAULT_et0macaddr=$(ifconfig eth0| awk '/eth0/ {print $5 }')
+DEFAULT_wan_proto="dhcp"
+DEFAULT_wan_ifname="vlan1"
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+  echo "### YOU ARE IN FAILSAFE MODE ####"
+  lan_ifname=${DEFAULT_lan_proto}
+  lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
+  lan_ipaddr=$DEFAULT_lan_ipaddr
+  lan_netmask=$DEFAULT_lan_netmask
+  lan_hwaddr=$DEFAULT_lan_hwaddr
+  wan_ifname="none"
+  wifi_ifname="none"
+}
diff --git a/target/linux/package/base-files/files/soekris-2.4/etc/config/network b/target/linux/package/base-files/files/soekris-2.4/etc/config/network
new file mode 100644
index 0000000000..fd0f557c04
--- /dev/null
+++ b/target/linux/package/base-files/files/soekris-2.4/etc/config/network
@@ -0,0 +1,12 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth1 eth2"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname="eth0"
+wan_proto="dhcp"
diff --git a/target/linux/package/base-files/files/soekris-2.4/etc/network.overrides b/target/linux/package/base-files/files/soekris-2.4/etc/network.overrides
new file mode 100644
index 0000000000..e857d5b5f1
--- /dev/null
+++ b/target/linux/package/base-files/files/soekris-2.4/etc/network.overrides
@@ -0,0 +1,26 @@
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+DEFAULT_lan_proto="static"
+DEFAULT_lan_ifname="br0"
+DEFAULT_lan_ifnames="eth0"
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+  echo "### YOU ARE IN FAILSAFE MODE ####"
+  lan_ifname=${DEFAULT_lan_proto}
+  lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
+  lan_ipaddr=$DEFAULT_lan_ipaddr
+  lan_netmask=$DEFAULT_lan_netmask
+  lan_hwaddr=$DEFAULT_lan_hwaddr
+  wan_ifname="none"
+  wifi_ifname="none"
+}