diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-06 20:55:33 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2008-11-06 20:55:33 +0000 |
commit | 0f80ce2088410d9ccb5f3c8070210af67c787ae0 (patch) | |
tree | 902ba8bee0eeb73fdb63e9402112c8c0ff4fb12f /target/linux/orion | |
parent | e3187ca12f98fa5966b8db5ab112a7cc17cfd8f0 (diff) |
[kernel] refresh 2.6.26 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13135 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/orion')
5 files changed, 185 insertions, 185 deletions
diff --git a/target/linux/orion/patches/000-orion_git_sync.patch b/target/linux/orion/patches/000-orion_git_sync.patch index 4daef75d5b..283ec05558 100644 --- a/target/linux/orion/patches/000-orion_git_sync.patch +++ b/target/linux/orion/patches/000-orion_git_sync.patch @@ -1,6 +1,6 @@ --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -2691,12 +2691,10 @@ +@@ -2691,12 +2691,10 @@ L: libertas-dev@lists.infradead.org S: Maintained MARVELL MV643XX ETHERNET DRIVER @@ -18,7 +18,7 @@ P: Petr Vandrovec --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -84,6 +84,11 @@ +@@ -84,6 +84,11 @@ config STACKTRACE_SUPPORT bool default y @@ -30,7 +30,7 @@ config LOCKDEP_SUPPORT bool default y -@@ -347,6 +352,16 @@ +@@ -347,6 +352,16 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to <sjhill@cotw.com>. @@ -47,7 +47,7 @@ config ARCH_KS8695 bool "Micrel/Kendin KS8695" select GENERIC_GPIO -@@ -365,6 +380,24 @@ +@@ -365,6 +380,24 @@ config ARCH_NS9XXX <http://www.digi.com/products/microprocessors/index.jsp> @@ -72,7 +72,7 @@ config ARCH_MXC bool "Freescale MXC/iMX-based" select ARCH_MTD_XIP -@@ -381,7 +414,8 @@ +@@ -381,7 +414,8 @@ config ARCH_ORION5X select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: @@ -82,7 +82,7 @@ config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" -@@ -502,6 +536,10 @@ +@@ -502,6 +536,10 @@ source "arch/arm/mach-ixp2000/Kconfig" source "arch/arm/mach-ixp23xx/Kconfig" @@ -93,7 +93,7 @@ source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -@@ -514,6 +552,8 @@ +@@ -514,6 +552,8 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" @@ -104,7 +104,7 @@ --- a/arch/arm/Makefile +++ b/arch/arm/Makefile -@@ -135,11 +135,14 @@ +@@ -135,11 +135,14 @@ endif machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx machine-$(CONFIG_ARCH_DAVINCI) := davinci @@ -121,7 +121,7 @@ # This is what happens if you forget the IOCS16 line. --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S -@@ -623,8 +623,8 @@ +@@ -623,8 +623,8 @@ proc_types: b __armv4_mmu_cache_off b __armv4_mmu_cache_flush @@ -4171,7 +4171,7 @@ # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -@@ -21,6 +21,7 @@ +@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -4179,7 +4179,7 @@ CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -40,24 +41,24 @@ +@@ -40,24 +41,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -4209,7 +4209,7 @@ # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y -@@ -73,20 +74,25 @@ +@@ -73,20 +74,25 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -4240,7 +4240,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set -@@ -111,7 +117,6 @@ +@@ -111,7 +117,6 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y @@ -4248,7 +4248,7 @@ # # System Type -@@ -160,6 +165,7 @@ +@@ -160,6 +165,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y @@ -4256,7 +4256,7 @@ # # Boot options -@@ -168,6 +174,7 @@ +@@ -168,6 +174,7 @@ CONFIG_MACH_TS209=y # # Power management # @@ -4264,7 +4264,7 @@ # # Processor Type -@@ -177,8 +184,9 @@ +@@ -177,8 +184,9 @@ CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y @@ -4275,7 +4275,7 @@ CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y -@@ -189,7 +197,6 @@ +@@ -189,7 +197,6 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set @@ -4283,7 +4283,7 @@ # CONFIG_OUTER_CACHE is not set # -@@ -199,6 +206,7 @@ +@@ -199,6 +206,7 @@ CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -4291,7 +4291,7 @@ # CONFIG_PCCARD is not set # -@@ -221,6 +229,7 @@ +@@ -221,6 +229,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set @@ -4299,7 +4299,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -@@ -238,7 +247,6 @@ +@@ -238,7 +247,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -4307,7 +4307,7 @@ # # Floating point emulation -@@ -311,8 +319,6 @@ +@@ -311,8 +319,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set @@ -4316,7 +4316,7 @@ # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set -@@ -335,6 +341,7 @@ +@@ -335,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Network testing # CONFIG_NET_PKTGEN=m @@ -4324,7 +4324,7 @@ # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -@@ -362,6 +369,8 @@ +@@ -362,6 +369,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -4333,7 +4333,7 @@ # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y -@@ -371,6 +380,7 @@ +@@ -371,6 +380,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -4341,7 +4341,7 @@ # # User Modules And Translation Layers -@@ -378,9 +388,8 @@ +@@ -378,9 +388,8 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y @@ -4353,7 +4353,7 @@ # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set -@@ -405,12 +414,12 @@ +@@ -405,12 +414,12 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y @@ -4368,7 +4368,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set -@@ -481,6 +490,9 @@ +@@ -481,6 +490,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -4378,7 +4378,7 @@ # # SCSI device support -@@ -542,6 +554,7 @@ +@@ -542,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -4386,7 +4386,7 @@ # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -@@ -556,7 +569,10 @@ +@@ -556,7 +569,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set @@ -4397,7 +4397,7 @@ # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y -@@ -566,7 +582,6 @@ +@@ -566,7 +582,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set @@ -4405,7 +4405,7 @@ # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set -@@ -611,6 +626,7 @@ +@@ -611,6 +626,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -4413,7 +4413,7 @@ # CONFIG_MD is not set # CONFIG_FUSION is not set -@@ -652,7 +668,7 @@ +@@ -652,7 +668,7 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_EEPRO100 is not set @@ -4422,7 +4422,7 @@ # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -@@ -668,9 +684,7 @@ +@@ -668,9 +684,7 @@ CONFIG_E100=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -4433,7 +4433,7 @@ # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set -@@ -680,27 +694,15 @@ +@@ -680,27 +694,15 @@ CONFIG_E1000_NAPI=y # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set @@ -4465,7 +4465,7 @@ # CONFIG_TR is not set # -@@ -708,6 +710,7 @@ +@@ -708,6 +710,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -4473,7 +4473,7 @@ # # USB Network Adapters -@@ -738,12 +741,9 @@ +@@ -738,12 +741,9 @@ CONFIG_INPUT=y # # Userland interfaces # @@ -4488,7 +4488,7 @@ # CONFIG_INPUT_EVBUG is not set # -@@ -765,10 +765,8 @@ +@@ -765,10 +765,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # @@ -4501,7 +4501,7 @@ # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set -@@ -777,7 +775,7 @@ +@@ -777,7 +775,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -4510,7 +4510,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set -@@ -792,7 +790,7 @@ +@@ -792,7 +790,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set @@ -4519,7 +4519,7 @@ # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -@@ -804,13 +802,6 @@ +@@ -804,13 +802,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -4533,7 +4533,7 @@ # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set -@@ -837,6 +828,7 @@ +@@ -837,6 +828,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -4541,7 +4541,7 @@ CONFIG_I2C_MV64XXX=y # -@@ -847,19 +839,13 @@ +@@ -847,19 +839,13 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -4561,7 +4561,7 @@ # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y -@@ -872,6 +858,7 @@ +@@ -872,6 +858,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set @@ -4569,7 +4569,7 @@ # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set -@@ -901,6 +888,7 @@ +@@ -901,6 +888,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -4577,7 +4577,7 @@ # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set -@@ -910,6 +898,7 @@ +@@ -910,6 +898,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set @@ -4585,7 +4585,7 @@ # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -@@ -925,14 +914,24 @@ +@@ -925,14 +914,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set @@ -4612,7 +4612,7 @@ # # Graphics support -@@ -949,12 +948,6 @@ +@@ -949,12 +948,6 @@ CONFIG_DAB=y # CONFIG_DISPLAY_SUPPORT is not set # @@ -4625,7 +4625,7 @@ # Sound # # CONFIG_SOUND is not set -@@ -985,14 +978,18 @@ +@@ -985,14 +978,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -4644,7 +4644,7 @@ # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set -@@ -1003,6 +1000,7 @@ +@@ -1003,6 +1000,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y @@ -4652,7 +4652,7 @@ # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -@@ -1022,7 +1020,9 @@ +@@ -1022,7 +1020,9 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set @@ -4662,7 +4662,7 @@ # CONFIG_USB_LIBUSUAL is not set # -@@ -1060,6 +1060,7 @@ +@@ -1060,6 +1060,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set @@ -4670,7 +4670,7 @@ # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set CONFIG_NEW_LEDS=y -@@ -1076,6 +1077,7 @@ +@@ -1076,6 +1077,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -4678,7 +4678,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y -@@ -1105,6 +1107,7 @@ +@@ -1105,6 +1107,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set @@ -4686,7 +4686,7 @@ # # SPI RTC drivers -@@ -1125,6 +1128,7 @@ +@@ -1125,6 +1128,7 @@ CONFIG_RTC_DRV_M41T80=y # # on-CPU RTC drivers # @@ -4694,7 +4694,7 @@ # # File systems -@@ -1140,14 +1144,11 @@ +@@ -1140,14 +1144,11 @@ CONFIG_JBD=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set @@ -4710,7 +4710,7 @@ # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set -@@ -1155,8 +1156,8 @@ +@@ -1155,8 +1156,8 @@ CONFIG_DNOTIFY=y # # CD-ROM/DVD Filesystems # @@ -4721,7 +4721,7 @@ # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y -@@ -1205,8 +1206,10 @@ +@@ -1205,8 +1206,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set @@ -4732,7 +4732,7 @@ # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -@@ -1214,7 +1217,6 @@ +@@ -1214,7 +1217,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set @@ -4740,7 +4740,7 @@ # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -@@ -1241,14 +1243,13 @@ +@@ -1241,14 +1243,13 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y @@ -4760,7 +4760,7 @@ # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set -@@ -1300,15 +1301,48 @@ +@@ -1300,15 +1301,48 @@ CONFIG_NLS_ISO8859_2=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y @@ -4811,7 +4811,7 @@ # # Security options -@@ -1317,50 +1351,79 @@ +@@ -1317,50 +1351,79 @@ CONFIG_DEBUG_USER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y @@ -4918,7 +4918,7 @@ # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -@@ -1369,12 +1432,14 @@ +@@ -1369,12 +1432,14 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y @@ -4939,7 +4939,7 @@ CONFIG_PLIST=y --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c -@@ -36,6 +36,7 @@ +@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { struct stack_trace *trace; @@ -4947,7 +4947,7 @@ unsigned int skip; }; -@@ -43,27 +44,52 @@ +@@ -43,27 +44,52 @@ static int save_trace(struct stackframe { struct stack_trace_data *data = d; struct stack_trace *trace = data->trace; @@ -5056,7 +5056,7 @@ .text /* -@@ -55,11 +47,12 @@ +@@ -55,11 +47,12 @@ ENTRY(memmove) stmfd sp!, {r5 - r8} blt 5f @@ -5070,7 +5070,7 @@ CALGN( add pc, r4, ip ) PLD( pld [r1, #-4] ) -@@ -138,8 +131,7 @@ +@@ -138,8 +131,7 @@ ENTRY(memmove) subs r2, r2, #28 blt 14f @@ -5082,7 +5082,7 @@ CALGN( bcc 15f ) --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S -@@ -39,6 +39,9 @@ +@@ -39,6 +39,9 @@ ENTRY(memset) mov r3, r1 cmp r2, #16 blt 4f @@ -5092,7 +5092,7 @@ /* * We need an extra register for this loop - save the return address and * use the LR -@@ -64,6 +67,49 @@ +@@ -64,6 +67,49 @@ ENTRY(memset) stmneia r0!, {r1, r3, ip, lr} ldr lr, [sp], #4 @@ -5144,7 +5144,7 @@ tst r2, #4 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S -@@ -39,6 +39,9 @@ +@@ -39,6 +39,9 @@ ENTRY(__memzero) */ cmp r1, #16 @ 1 we can skip this chunk if we blt 4f @ 1 have < 16 bytes @@ -5154,7 +5154,7 @@ /* * We need an extra register for this loop - save the return address and * use the LR -@@ -64,6 +67,47 @@ +@@ -64,6 +67,47 @@ ENTRY(__memzero) stmneia r0!, {r2, r3, ip, lr} @ 4 ldr lr, [sp], #4 @ 1 @@ -8286,7 +8286,7 @@ +} --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig -@@ -44,6 +44,36 @@ +@@ -44,6 +44,36 @@ config MACH_LINKSTATION_PRO Buffalo Linkstation Pro/Live platform. Both v1 and v2 devices are supported. @@ -8350,7 +8350,7 @@ static int __init orion5x_cpu_win_can_remap(int win) { -@@ -87,16 +88,22 @@ +@@ -87,16 +88,22 @@ static int __init orion5x_cpu_win_can_re static void __init setup_cpu_win(int win, u32 base, u32 size, u8 target, u8 attr, int remap) { @@ -8378,7 +8378,7 @@ } } -@@ -109,11 +116,11 @@ +@@ -109,11 +116,11 @@ void __init orion5x_setup_cpu_mbus_bridg * First, disable and clear windows. */ for (i = 0; i < 8; i++) { @@ -8394,7 +8394,7 @@ } } -@@ -128,6 +135,7 @@ +@@ -128,6 +135,7 @@ void __init orion5x_setup_cpu_mbus_bridg TARGET_PCIE, ATTR_PCIE_MEM, -1); setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, TARGET_PCI, ATTR_PCI_MEM, -1); @@ -8402,7 +8402,7 @@ /* * Setup MBUS dram target info. -@@ -147,8 +155,8 @@ +@@ -147,8 +155,8 @@ void __init orion5x_setup_cpu_mbus_bridg w = &orion5x_mbus_dram_info.cs[cs++]; w->cs_index = i; w->mbus_attr = 0xf & ~(1 << i); @@ -8413,7 +8413,7 @@ } } orion5x_mbus_dram_info.num_cs = cs; -@@ -156,25 +164,30 @@ +@@ -156,25 +164,30 @@ void __init orion5x_setup_cpu_mbus_bridg void __init orion5x_setup_dev_boot_win(u32 base, u32 size) { @@ -8451,7 +8451,7 @@ } --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c -@@ -39,25 +39,22 @@ +@@ -39,25 +39,22 @@ static struct map_desc orion5x_io_desc[] .virtual = ORION5X_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), .length = ORION5X_REGS_SIZE, @@ -8484,7 +8484,7 @@ }, }; -@@ -66,101 +63,32 @@ +@@ -66,101 +63,32 @@ void __init orion5x_map_io(void) iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); } @@ -8595,7 +8595,7 @@ static struct platform_device orion5x_ehci0 = { .name = "orion-ehci", .id = 0, -@@ -173,6 +101,27 @@ +@@ -173,6 +101,27 @@ static struct platform_device orion5x_eh .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), }; @@ -8623,7 +8623,7 @@ static struct platform_device orion5x_ehci1 = { .name = "orion-ehci", .id = 1, -@@ -185,11 +134,15 @@ +@@ -185,11 +134,15 @@ static struct platform_device orion5x_eh .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), }; @@ -8642,7 +8642,7 @@ struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = { .dram = &orion5x_mbus_dram_info, .t_clk = ORION5X_TCLK, -@@ -219,7 +172,7 @@ +@@ -219,7 +172,7 @@ static struct resource orion5x_eth_resou .start = IRQ_ORION5X_ETH_SUM, .end = IRQ_ORION5X_ETH_SUM, .flags = IORESOURCE_IRQ, @@ -8651,7 +8651,7 @@ }; static struct platform_device orion5x_eth = { -@@ -238,11 +191,10 @@ +@@ -238,11 +191,10 @@ void __init orion5x_eth_init(struct mv64 platform_device_register(&orion5x_eth); } @@ -8665,7 +8665,7 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { .freq_m = 8, /* assumes 166 MHz TCLK */ .freq_n = 3, -@@ -251,16 +203,15 @@ +@@ -251,16 +203,15 @@ static struct mv64xxx_i2c_pdata orion5x_ static struct resource orion5x_i2c_resources[] = { { @@ -8691,7 +8691,7 @@ }, }; -@@ -270,36 +221,41 @@ +@@ -270,36 +221,41 @@ static struct platform_device orion5x_i2 .num_resources = ARRAY_SIZE(orion5x_i2c_resources), .resource = orion5x_i2c_resources, .dev = { @@ -8750,7 +8750,7 @@ }; void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) -@@ -309,23 +265,111 @@ +@@ -309,23 +265,111 @@ void __init orion5x_sata_init(struct mv_ platform_device_register(&orion5x_sata); } @@ -8865,7 +8865,7 @@ /* * Identify device ID and rev from PCIe configuration header space '0'. */ -@@ -350,8 +394,10 @@ +@@ -350,8 +394,10 @@ static void __init orion5x_id(u32 *dev, } else if (*dev == MV88F5181_DEV_ID) { if (*rev == MV88F5181_REV_B1) { *dev_name = "MV88F5181-Rev-B1"; @@ -8877,7 +8877,7 @@ } } else { *dev_name = "Device-Unknown"; -@@ -370,15 +416,6 @@ +@@ -370,15 +416,6 @@ void __init orion5x_init(void) * Setup Orion address map */ orion5x_setup_cpu_mbus_bridge(); @@ -8909,7 +8909,7 @@ void orion5x_map_io(void); void orion5x_init_irq(void); void orion5x_init(void); -@@ -23,13 +25,19 @@ +@@ -23,13 +25,19 @@ void orion5x_setup_dev1_win(u32 base, u3 void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); @@ -8933,7 +8933,7 @@ void orion5x_pcie_id(u32 *dev, u32 *rev); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); -@@ -40,26 +48,9 @@ +@@ -40,26 +48,9 @@ int orion5x_pci_map_irq(struct pci_dev * * Valid GPIO pins according to MPP setup, used by machine-setup. * (/mach-orion/gpio.c). */ @@ -8971,7 +8971,7 @@ /***************************************************************************** * DB-88F5281 on board devices -@@ -86,7 +87,7 @@ +@@ -86,7 +87,7 @@ static struct platform_device db88f5281_ .name = "physmap-flash", .id = 0, .dev = { @@ -8980,7 +8980,7 @@ }, .num_resources = 1, .resource = &db88f5281_boot_flash_resource, -@@ -110,7 +111,7 @@ +@@ -110,7 +111,7 @@ static struct platform_device db88f5281_ .name = "physmap-flash", .id = 1, .dev = { @@ -8989,7 +8989,7 @@ }, .num_resources = 1, .resource = &db88f5281_nor_flash_resource, -@@ -125,18 +126,15 @@ +@@ -125,18 +126,15 @@ static struct mtd_partition db88f5281_na .name = "kernel", .offset = 0, .size = SZ_2M, @@ -9011,7 +9011,7 @@ .name = "recovery", .offset = (SZ_16M + SZ_8M), .size = SZ_8M, -@@ -288,7 +286,6 @@ +@@ -288,7 +286,6 @@ subsys_initcall(db88f5281_pci_init); ****************************************************************************/ static struct mv643xx_eth_platform_data db88f5281_eth_data = { .phy_addr = 8, @@ -9019,7 +9019,7 @@ }; /***************************************************************************** -@@ -301,11 +298,28 @@ +@@ -301,11 +298,28 @@ static struct i2c_board_info __initdata /***************************************************************************** * General Setup ****************************************************************************/ @@ -9053,7 +9053,7 @@ }; static void __init db88f5281_init(void) -@@ -315,39 +329,31 @@ +@@ -315,39 +329,31 @@ static void __init db88f5281_init(void) */ orion5x_init(); @@ -9119,7 +9119,7 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 -@@ -52,8 +53,6 @@ +@@ -52,8 +53,6 @@ static int __init dns323_pci_map_irq(str if (irq != -1) return irq; @@ -9128,7 +9128,7 @@ return -1; } -@@ -81,7 +80,6 @@ +@@ -81,7 +80,6 @@ subsys_initcall(dns323_pci_init); static struct mv643xx_eth_platform_data dns323_eth_data = { .phy_addr = 8, @@ -9136,7 +9136,7 @@ }; /**************************************************************************** -@@ -119,7 +117,7 @@ +@@ -119,7 +117,7 @@ static struct mtd_partition dns323_parti .name = "u-boot", .size = 0x00030000, .offset = 0x007d0000, @@ -9145,7 +9145,7 @@ }; static struct physmap_flash_data dns323_nor_flash_data = { -@@ -137,7 +135,9 @@ +@@ -137,7 +135,9 @@ static struct resource dns323_nor_flash_ static struct platform_device dns323_nor_flash = { .name = "physmap-flash", .id = 0, @@ -9156,7 +9156,7 @@ .resource = &dns323_nor_flash_resource, .num_resources = 1, }; -@@ -170,7 +170,9 @@ +@@ -170,7 +170,9 @@ static struct gpio_led_platform_data dns static struct platform_device dns323_gpio_leds = { .name = "leds-gpio", .id = -1, @@ -9167,7 +9167,7 @@ }; /**************************************************************************** -@@ -183,35 +185,53 @@ +@@ -183,35 +185,53 @@ static struct gpio_keys_button dns323_bu .gpio = DNS323_GPIO_KEY_RESET, .desc = "Reset Button", .active_low = 1, @@ -9231,7 +9231,7 @@ }; /* -@@ -225,17 +245,15 @@ +@@ -225,17 +245,15 @@ static struct platform_device *dns323_pl static struct i2c_board_info __initdata dns323_i2c_devices[] = { { I2C_BOARD_INFO("g760a", 0x3e), @@ -9252,7 +9252,7 @@ }; /* DNS-323 specific power off method */ -@@ -250,62 +268,35 @@ +@@ -250,62 +268,35 @@ static void __init dns323_init(void) /* Setup basic Orion functions. Need to be called early. */ orion5x_init(); @@ -9336,7 +9336,7 @@ /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ --- a/arch/arm/mach-orion5x/gpio.c +++ b/arch/arm/mach-orion5x/gpio.c -@@ -24,9 +24,12 @@ +@@ -24,9 +24,12 @@ static DEFINE_SPINLOCK(gpio_lock); static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ @@ -9351,7 +9351,7 @@ } /* -@@ -93,10 +96,10 @@ +@@ -93,10 +96,10 @@ int gpio_get_value(unsigned pin) { int val, mask = 1 << pin; @@ -9365,7 +9365,7 @@ return val & mask; } -@@ -188,39 +191,39 @@ +@@ -188,39 +191,39 @@ void gpio_display(void) printk("GPIO, free\n"); } else { printk("GPIO, used by %s, ", gpio_label[i]); @@ -9424,7 +9424,7 @@ } --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c -@@ -82,7 +82,7 @@ +@@ -82,7 +82,7 @@ static int orion5x_gpio_set_irq_type(u32 int pin = irq_to_gpio(irq); struct irq_desc *desc; @@ -9433,7 +9433,7 @@ printk(KERN_ERR "orion5x_gpio_set_irq_type failed " "(irq %d, pin %d).\n", irq, pin); return -EINVAL; -@@ -117,7 +117,7 @@ +@@ -117,7 +117,7 @@ static int orion5x_gpio_set_irq_type(u32 /* * set initial polarity based on current input level */ @@ -9442,7 +9442,7 @@ & (1 << pin)) orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ else -@@ -149,8 +149,8 @@ +@@ -149,8 +149,8 @@ static void orion5x_gpio_irq_handler(uns BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8; @@ -9453,7 +9453,7 @@ for (pin = offs; pin < offs + 8; pin++) { if (cause & (1 << pin)) { -@@ -158,9 +158,9 @@ +@@ -158,9 +158,9 @@ static void orion5x_gpio_irq_handler(uns desc = irq_desc + irq; if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { /* Swap polarity (race with GPIO line) */ @@ -9465,7 +9465,7 @@ } desc_handle_irq(irq, desc); } -@@ -175,9 +175,9 @@ +@@ -175,9 +175,9 @@ static void __init orion5x_init_gpio_irq /* * Mask and clear GPIO IRQ interrupts */ @@ -9501,7 +9501,7 @@ /***************************************************************************** * KUROBOX-PRO Info -@@ -53,13 +56,11 @@ +@@ -53,13 +56,11 @@ static struct mtd_partition kurobox_pro_ .name = "uImage", .offset = 0, .size = SZ_4M, @@ -9517,7 +9517,7 @@ .name = "extra", .offset = SZ_4M + SZ_64M, .size = SZ_256M - (SZ_4M + SZ_64M), -@@ -132,8 +133,6 @@ +@@ -132,8 +133,6 @@ static int __init kurobox_pro_pci_map_ir /* * PCI isn't used on the Kuro */ @@ -9526,7 +9526,7 @@ return -1; } -@@ -161,7 +160,6 @@ +@@ -161,7 +160,6 @@ subsys_initcall(kurobox_pro_pci_init); static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { .phy_addr = 8, @@ -9534,7 +9534,7 @@ }; /***************************************************************************** -@@ -175,12 +173,169 @@ +@@ -175,12 +173,169 @@ static struct i2c_board_info __initdata * SATA ****************************************************************************/ static struct mv_sata_platform_data kurobox_pro_sata_data = { @@ -9705,7 +9705,7 @@ static void __init kurobox_pro_init(void) { -@@ -189,46 +344,32 @@ +@@ -189,46 +344,32 @@ static void __init kurobox_pro_init(void */ orion5x_init(); @@ -10486,7 +10486,7 @@ +MACHINE_END --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c -@@ -152,6 +152,8 @@ +@@ -152,6 +152,8 @@ static int __init pcie_setup(struct pci_ if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " "read transaction workaround\n"); @@ -10495,7 +10495,7 @@ pcie_ops.read = pcie_rd_conf_wa; } -@@ -240,13 +242,13 @@ +@@ -240,13 +242,13 @@ static int __init pcie_setup(struct pci_ * PCI Address Decode Windows registers */ #define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \ @@ -10516,7 +10516,7 @@ #define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c) #define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c) -@@ -266,7 +268,7 @@ +@@ -266,7 +268,7 @@ static DEFINE_SPINLOCK(orion5x_pci_lock) static int orion5x_pci_local_bus_nr(void) { @@ -10525,7 +10525,7 @@ return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); } -@@ -276,11 +278,11 @@ +@@ -276,11 +278,11 @@ static int orion5x_pci_hw_rd_conf(int bu unsigned long flags; spin_lock_irqsave(&orion5x_pci_lock, flags); @@ -10541,7 +10541,7 @@ if (size == 1) *val = (*val >> (8*(where & 0x3))) & 0xff; -@@ -300,9 +302,9 @@ +@@ -300,9 +302,9 @@ static int orion5x_pci_hw_wr_conf(int bu spin_lock_irqsave(&orion5x_pci_lock, flags); @@ -10554,7 +10554,7 @@ if (size == 4) { __raw_writel(val, PCI_CONF_DATA); -@@ -353,9 +355,9 @@ +@@ -353,9 +355,9 @@ static struct pci_ops pci_ops = { static void __init orion5x_pci_set_bus_nr(int nr) { @@ -10566,7 +10566,7 @@ /* * PCI-X mode */ -@@ -372,7 +374,7 @@ +@@ -372,7 +374,7 @@ static void __init orion5x_pci_set_bus_n */ p2p &= ~PCI_P2P_BUS_MASK; p2p |= (nr << PCI_P2P_BUS_OFFS); @@ -10575,7 +10575,7 @@ } } -@@ -399,7 +401,7 @@ +@@ -399,7 +401,7 @@ static void __init orion5x_setup_pci_win * First, disable windows. */ win_enable = 0xffffffff; @@ -10584,7 +10584,7 @@ /* * Setup windows for DDR banks. -@@ -425,10 +427,10 @@ +@@ -425,10 +427,10 @@ static void __init orion5x_setup_pci_win */ reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); @@ -10599,7 +10599,7 @@ /* * Enable decode window for this chip select. -@@ -439,7 +441,7 @@ +@@ -439,7 +441,7 @@ static void __init orion5x_setup_pci_win /* * Re-enable decode windows. */ @@ -10618,7 +10618,7 @@ /***************************************************************************** * RD-88F5182 Info -@@ -125,6 +126,7 @@ +@@ -125,6 +126,7 @@ static int __init rd88f5182_dbgled_init( leds_event = rd88f5182_dbgled_event; } @@ -10626,7 +10626,7 @@ return 0; } -@@ -220,7 +222,6 @@ +@@ -220,7 +222,6 @@ subsys_initcall(rd88f5182_pci_init); static struct mv643xx_eth_platform_data rd88f5182_eth_data = { .phy_addr = 8, @@ -10634,7 +10634,7 @@ }; /***************************************************************************** -@@ -234,15 +235,34 @@ +@@ -234,15 +235,34 @@ static struct i2c_board_info __initdata * Sata ****************************************************************************/ static struct mv_sata_platform_data rd88f5182_sata_data = { @@ -10673,7 +10673,7 @@ }; static void __init rd88f5182_init(void) -@@ -252,35 +272,9 @@ +@@ -252,35 +272,9 @@ static void __init rd88f5182_init(void) */ orion5x_init(); @@ -10710,7 +10710,7 @@ * MPP[20] PCI Clock to MV88F5182 * MPP[21] PCI Clock to mini PCI CON11 * MPP[22] USB 0 over current indication -@@ -289,16 +283,23 @@ +@@ -289,16 +283,23 @@ static void __init rd88f5182_init(void) * MPP[25] USB 0 over current enable */ @@ -10839,7 +10839,7 @@ }; /***************************************************************************** -@@ -164,12 +168,12 @@ +@@ -164,12 +168,12 @@ static int __init qnap_ts209_pci_map_irq } static struct hw_pci qnap_ts209_pci __initdata = { @@ -10858,7 +10858,7 @@ }; static int __init qnap_ts209_pci_init(void) -@@ -183,96 +187,6 @@ +@@ -183,96 +187,6 @@ static int __init qnap_ts209_pci_init(vo subsys_initcall(qnap_ts209_pci_init); /***************************************************************************** @@ -10955,7 +10955,7 @@ * RTC S35390A on I2C bus ****************************************************************************/ -@@ -280,7 +194,7 @@ +@@ -280,7 +194,7 @@ static void __init ts209_find_mac_addr(v static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), @@ -10964,7 +10964,7 @@ }; /**************************************************************************** -@@ -297,70 +211,63 @@ +@@ -297,70 +211,63 @@ static struct gpio_keys_button qnap_ts20 .gpio = QNAP_TS209_GPIO_KEY_MEDIA, .desc = "USB Copy Button", .active_low = 1, @@ -11064,7 +11064,7 @@ static void __init qnap_ts209_init(void) { /* -@@ -368,51 +275,33 @@ +@@ -368,51 +275,33 @@ static void __init qnap_ts209_init(void) */ orion5x_init(); @@ -11134,7 +11134,7 @@ /* Get RTC IRQ and register the chip */ if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { -@@ -425,14 +314,12 @@ +@@ -425,14 +314,12 @@ static void __init qnap_ts209_init(void) pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); @@ -12044,7 +12044,7 @@ +MACHINE_END --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig -@@ -365,7 +365,7 @@ +@@ -365,7 +365,7 @@ config CPU_XSC3 # Feroceon config CPU_FEROCEON bool @@ -12053,7 +12053,7 @@ default y select CPU_32v5 select CPU_ABRT_EV5T -@@ -373,7 +373,7 @@ +@@ -373,7 +373,7 @@ config CPU_FEROCEON select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_FEROCEON if MMU @@ -12062,7 +12062,7 @@ config CPU_FEROCEON_OLD_ID bool "Accept early Feroceon cores with an ARM926 ID" -@@ -551,6 +551,11 @@ +@@ -551,6 +551,11 @@ config CPU_TLB_V4WBI ARM Architecture Version 4 TLB with writeback cache and invalidate instruction cache entry. @@ -12074,7 +12074,7 @@ config CPU_TLB_V6 bool -@@ -709,6 +714,14 @@ +@@ -709,6 +714,14 @@ config OUTER_CACHE bool default n @@ -12091,7 +12091,7 @@ depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile -@@ -46,6 +46,7 @@ +@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o @@ -12099,7 +12099,7 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o -@@ -73,4 +74,5 @@ +@@ -73,4 +74,5 @@ obj-$(CONFIG_CPU_FEROCEON) += proc-feroc obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o @@ -12460,7 +12460,7 @@ mov pc, lr /* -@@ -59,6 +79,13 @@ +@@ -59,6 +79,13 @@ ENTRY(cpu_feroceon_proc_fin) mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE msr cpsr_c, ip bl feroceon_flush_kern_cache_all @@ -12474,7 +12474,7 @@ mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. -@@ -117,11 +144,19 @@ +@@ -117,11 +144,19 @@ ENTRY(feroceon_flush_user_cache_all) */ ENTRY(feroceon_flush_kern_cache_all) mov r2, #VM_EXEC @@ -12497,7 +12497,7 @@ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB mov pc, lr -@@ -138,7 +173,6 @@ +@@ -138,7 +173,6 @@ __flush_whole_cache: */ .align 5 ENTRY(feroceon_flush_user_cache_range) @@ -12505,7 +12505,7 @@ sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT bgt __flush_whole_cache -@@ -152,6 +186,7 @@ +@@ -152,6 +186,7 @@ ENTRY(feroceon_flush_user_cache_range) cmp r0, r1 blo 1b tst r2, #VM_EXEC @@ -12513,7 +12513,7 @@ mcrne p15, 0, ip, c7, c10, 4 @ drain WB mov pc, lr -@@ -209,6 +244,20 @@ +@@ -209,6 +244,20 @@ ENTRY(feroceon_flush_kern_dcache_page) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -12534,7 +12534,7 @@ /* * dma_inv_range(start, end) * -@@ -225,10 +274,10 @@ +@@ -225,10 +274,10 @@ ENTRY(feroceon_flush_kern_dcache_page) .align 5 ENTRY(feroceon_dma_inv_range) tst r0, #CACHE_DLINESIZE - 1 @@ -12546,7 +12546,7 @@ 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 -@@ -236,6 +285,22 @@ +@@ -236,6 +285,22 @@ ENTRY(feroceon_dma_inv_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -12569,7 +12569,7 @@ /* * dma_clean_range(start, end) * -@@ -256,6 +321,19 @@ +@@ -256,6 +321,19 @@ ENTRY(feroceon_dma_clean_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -12589,7 +12589,7 @@ /* * dma_flush_range(start, end) * -@@ -274,6 +352,19 @@ +@@ -274,6 +352,19 @@ ENTRY(feroceon_dma_flush_range) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr @@ -12609,7 +12609,7 @@ ENTRY(feroceon_cache_fns) .long feroceon_flush_kern_cache_all .long feroceon_flush_user_cache_all -@@ -285,12 +376,33 @@ +@@ -285,12 +376,33 @@ ENTRY(feroceon_cache_fns) .long feroceon_dma_clean_range .long feroceon_dma_flush_range @@ -12643,7 +12643,7 @@ mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr -@@ -306,16 +418,25 @@ +@@ -306,16 +418,25 @@ ENTRY(cpu_feroceon_dcache_clean_area) .align 5 ENTRY(cpu_feroceon_switch_mm) #ifdef CONFIG_MMU @@ -12676,7 +12676,7 @@ /* * cpu_feroceon_set_pte_ext(ptep, pte, ext) -@@ -345,6 +466,9 @@ +@@ -345,6 +466,9 @@ ENTRY(cpu_feroceon_set_pte_ext) str r2, [r0] @ hardware version mov r0, r0 mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -12686,7 +12686,7 @@ mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif mov pc, lr -@@ -414,6 +538,21 @@ +@@ -414,6 +538,21 @@ cpu_feroceon_name: .asciz "Feroceon" .size cpu_feroceon_name, . - cpu_feroceon_name @@ -12708,7 +12708,7 @@ .align .section ".proc.info.init", #alloc, #execinstr -@@ -421,15 +560,15 @@ +@@ -421,15 +560,15 @@ cpu_feroceon_name: #ifdef CONFIG_CPU_FEROCEON_OLD_ID .type __feroceon_old_id_proc_info,#object __feroceon_old_id_proc_info: @@ -12728,7 +12728,7 @@ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ -@@ -445,17 +584,17 @@ +@@ -445,17 +584,17 @@ __feroceon_old_id_proc_info: .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info #endif @@ -12750,7 +12750,7 @@ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ -@@ -463,9 +602,59 @@ +@@ -463,9 +602,59 @@ __feroceon_proc_info: .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP @@ -12814,7 +12814,7 @@ + .size __88fr131_proc_info, . - __88fr131_proc_info --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c -@@ -36,8 +36,8 @@ +@@ -36,8 +36,8 @@ static void orion_irq_unmask(u32 irq) static struct irq_chip orion_irq_chip = { .name = "orion_irq", @@ -12824,7 +12824,7 @@ .unmask = orion_irq_unmask, }; -@@ -59,6 +59,7 @@ +@@ -59,6 +59,7 @@ void __init orion_irq_init(unsigned int set_irq_chip(irq, &orion_irq_chip); set_irq_chip_data(irq, maskaddr); set_irq_handler(irq, handle_level_irq); @@ -12842,7 +12842,7 @@ #define PCIE_STAT_OFF 0x1a04 #define PCIE_STAT_DEV_OFFS 20 #define PCIE_STAT_DEV_MASK 0x1f -@@ -62,6 +63,11 @@ +@@ -62,6 +63,11 @@ int orion_pcie_link_up(void __iomem *bas return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); } @@ -12856,7 +12856,7 @@ u32 stat = readl(base + PCIE_STAT_OFF); --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c -@@ -74,7 +74,7 @@ +@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long de /* * Clear and enable clockevent timer interrupt. */ @@ -12865,7 +12865,7 @@ u = readl(BRIDGE_MASK); u |= BRIDGE_INT_TIMER1; -@@ -138,7 +138,7 @@ +@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode /* * ACK pending timer interrupt. */ @@ -12874,7 +12874,7 @@ } local_irq_restore(flags); -@@ -159,7 +159,7 @@ +@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt /* * ACK timer interrupt and call event handler. */ @@ -13373,7 +13373,7 @@ u16 byte_cnt; /* Descriptor buffer byte count */ u16 buf_size; /* Buffer size */ u32 cmd_sts; /* Descriptor command status */ -@@ -441,7 +180,7 @@ +@@ -441,7 +180,7 @@ struct eth_rx_desc { u32 buf_ptr; /* Descriptor buffer pointer */ }; @@ -13382,7 +13382,7 @@ u16 byte_cnt; /* buffer byte count */ u16 l4i_chk; /* CPU provided TCP checksum */ u32 cmd_sts; /* Command/status field */ -@@ -449,7 +188,7 @@ +@@ -449,7 +188,7 @@ struct eth_tx_desc { u32 buf_ptr; /* pointer to buffer for this descriptor*/ }; #elif defined(__LITTLE_ENDIAN) @@ -13391,7 +13391,7 @@ u32 cmd_sts; /* Descriptor command status */ u16 buf_size; /* Buffer size */ u16 byte_cnt; /* Descriptor buffer byte count */ -@@ -457,7 +196,7 @@ +@@ -457,7 +196,7 @@ struct eth_rx_desc { u32 next_desc_ptr; /* Next descriptor pointer */ }; @@ -13400,7 +13400,7 @@ u32 cmd_sts; /* Command/status field */ u16 l4i_chk; /* CPU provided TCP checksum */ u16 byte_cnt; /* buffer byte count */ -@@ -468,18 +207,59 @@ +@@ -468,18 +207,59 @@ struct eth_tx_desc { #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif @@ -13470,7 +13470,7 @@ u64 good_octets_received; u32 bad_octets_received; u32 internal_mac_transmit_err; -@@ -512,461 +292,282 @@ +@@ -512,461 +292,282 @@ struct mv643xx_mib_counters { u32 late_collision; }; @@ -14124,7 +14124,7 @@ stats->rx_errors++; dev_kfree_skb_irq(skb); -@@ -975,668 +576,120 @@ +@@ -975,668 +576,120 @@ static int mv643xx_eth_receive_queue(str * The -4 is for the CRC in the trailer of the * received packet */ @@ -14869,7 +14869,7 @@ desc->l4i_chk = 0; desc->byte_cnt = this_frag->size; desc->buf_ptr = dma_map_page(NULL, this_frag->page, -@@ -1651,37 +704,28 @@ +@@ -1651,37 +704,28 @@ static inline __be16 sum16_as_be(__sum16 return (__force __be16)sum; } @@ -14917,7 +14917,7 @@ } desc->byte_cnt = length; -@@ -1690,13 +734,13 @@ +@@ -1690,13 +734,13 @@ static void eth_tx_submit_descs_for_skb( if (skb->ip_summed == CHECKSUM_PARTIAL) { BUG_ON(skb->protocol != htons(ETH_P_IP)); @@ -14935,7 +14935,7 @@ desc->l4i_chk = ntohs(sum16_as_be(udp_hdr(skb)->check)); break; case IPPROTO_TCP: -@@ -1707,7 +751,7 @@ +@@ -1707,7 +751,7 @@ static void eth_tx_submit_descs_for_skb( } } else { /* Errata BTS #50, IHL must be 5 if no HW checksum */ @@ -14944,7 +14944,7 @@ desc->l4i_chk = 0; } -@@ -1717,1649 +761,1818 @@ +@@ -1717,1649 +761,1818 @@ static void eth_tx_submit_descs_for_skb( /* ensure all descriptors are written before poking hardware */ wmb(); @@ -19429,7 +19429,7 @@ static inline void __iomem * __arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -@@ -53,15 +52,12 @@ +@@ -53,15 +52,12 @@ static inline void __iomem *__io(unsigne /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ @@ -19632,7 +19632,7 @@ #define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ TLB_V4_I_FULL | TLB_V4_D_FULL | \ TLB_V4_D_PAGE) -@@ -245,12 +264,14 @@ +@@ -245,12 +264,14 @@ extern struct cpu_tlb_fns cpu_tlb; #define possible_tlb_flags (v3_possible_flags | \ v4_possible_flags | \ v4wbi_possible_flags | \ @@ -19647,7 +19647,7 @@ v4wb_always_flags & \ v6wbi_always_flags) -@@ -417,6 +438,11 @@ +@@ -417,6 +438,11 @@ static inline void flush_pmd_entry(pmd_t if (tlb_flag(TLB_DCLEAN)) asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" : : "r" (pmd) : "cc"); @@ -19659,7 +19659,7 @@ if (tlb_flag(TLB_WB)) dsb(); } -@@ -428,6 +454,10 @@ +@@ -428,6 +454,10 @@ static inline void clean_pmd_entry(pmd_t if (tlb_flag(TLB_DCLEAN)) asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" : : "r" (pmd) : "cc"); diff --git a/target/linux/orion/patches/010-ignore_atag_cmdline.patch b/target/linux/orion/patches/010-ignore_atag_cmdline.patch index 45975fe38f..f93ad779d3 100644 --- a/target/linux/orion/patches/010-ignore_atag_cmdline.patch +++ b/target/linux/orion/patches/010-ignore_atag_cmdline.patch @@ -1,6 +1,6 @@ --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c -@@ -719,7 +719,7 @@ +@@ -719,7 +719,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi static int __init parse_tag_cmdline(const struct tag *tag) { diff --git a/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch b/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch index 270d3e5f12..6268a05b51 100644 --- a/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch +++ b/target/linux/orion/patches/050-wrt350nv2_cfi_workaround.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -323,8 +323,9 @@ +@@ -323,8 +323,9 @@ struct mtd_info *cfi_cmdset_0002(struct return NULL; } diff --git a/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch b/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch index 206002a791..cc272b2b88 100644 --- a/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch +++ b/target/linux/orion/patches/099-add_netgear_wnr854t_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig -@@ -74,6 +74,12 @@ +@@ -74,6 +74,12 @@ config MACH_MSS2 Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. @@ -15,7 +15,7 @@ endif --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile -@@ -10,3 +10,4 @@ +@@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o @@ -189,7 +189,7 @@ +MACHINE_END --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig -@@ -166,6 +166,7 @@ +@@ -166,6 +166,7 @@ CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y CONFIG_MACH_LINKSTATION_PRO=y diff --git a/target/linux/orion/patches/100-openwrt_partition_map.patch b/target/linux/orion/patches/100-openwrt_partition_map.patch index 082c0c1b75..d95e2ec8b6 100644 --- a/target/linux/orion/patches/100-openwrt_partition_map.patch +++ b/target/linux/orion/patches/100-openwrt_partition_map.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c -@@ -56,19 +56,11 @@ +@@ -56,19 +56,11 @@ static struct mtd_partition wrt350n_v2_n { .name = "kernel", .offset = 0x00000000, |