mpc85xx: remove 3.7 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35872 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 0 insertions, 998 deletions

diff --git a/target/linux/mpc85xx/config-3.7 b/target/linux/mpc85xx/config-3.7
deleted file mode 100644
index f3d68dcff6..0000000000
--- a/target/linux/mpc85xx/config-3.7
+++ /dev/null
@@ -1,278 +0,0 @@
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BOOKE=y
-CONFIG_BOUNCE=y
-# CONFIG_BSC9131_RDB is not set
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CPM2 is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVKMEM=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_KERNEL_THREAD=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_RAPIDIO=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IPIC is not set
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGRATION=y
-# CONFIG_MII is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-CONFIG_MPC85xx_CDS=y
-# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_P1010_RDB=y
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDS is not set
-# CONFIG_P2041_RDB is not set
-# CONFIG_P3041_DS is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_P5020_DS is not set
-# CONFIG_P5040_DS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_PPC_CLOCK=y
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_OF=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_QEMU_E500 is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC8548 is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOCK_DIAG=y
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_FSL_LIB=y
-CONFIG_SPI_MASTER=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TL_WDR4900_V1=y
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WORD_SIZE=32
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
diff --git a/target/linux/mpc85xx/patches-3.7/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-3.7/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
deleted file mode 100644
index e79edbea74..0000000000
--- a/target/linux/mpc85xx/patches-3.7/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -27,6 +27,7 @@ static struct of_device_id __initdata mp
- 	{ .compatible = "fsl,mpc8548-guts", },
- 	/* Probably unnecessary? */
- 	{ .compatible = "gpio-leds", },
-+	{ .compatible = "gpio-keys", },
- 	/* For all PCI controllers */
- 	{ .compatible = "fsl,mpc8540-pci", },
- 	{ .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-3.7/100-fix_mpc8568e_mds.patch b/target/linux/mpc85xx/patches-3.7/100-fix_mpc8568e_mds.patch
deleted file mode 100644
index ba706f6a6b..0000000000
--- a/target/linux/mpc85xx/patches-3.7/100-fix_mpc8568e_mds.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/boot/dts/mpc8568mds.dts
-+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
-@@ -317,6 +317,9 @@
- 			gpios = <&bcsr5 3 0>;
- 		};
- 	};
-+	chosen {
-+		linux,stdout-path = "/soc8568@e0000000/serial@4500";
-+	};
- };
- 
- /include/ "fsl/mpc8568si-post.dtsi"
---- a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
-@@ -134,17 +134,8 @@
- 
- 	};
- 
--	duart-sleep-nexus {
--		#address-cells = <1>;
--		#size-cells = <1>;
--		compatible = "simple-bus";
--		sleep = <&pmc 0x00000002>;
--		ranges;
--
- /include/ "pq3-duart-0.dtsi"
- 
--	};
--
- 	L2: l2-cache-controller@20000 {
- 		compatible = "fsl,mpc8568-l2-cache-controller";
- 		reg = <0x20000 0x1000>;
diff --git a/target/linux/mpc85xx/patches-3.7/110-fix_mpc8548_cds.patch b/target/linux/mpc85xx/patches-3.7/110-fix_mpc8548_cds.patch
deleted file mode 100644
index 3ca1bccec0..0000000000
--- a/target/linux/mpc85xx/patches-3.7/110-fix_mpc8548_cds.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts
-+++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts
-@@ -75,6 +75,9 @@
- 			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
- 		};
- 	};
-+	chosen {
-+		linux,stdout-path = "/soc8548@e0000000/serial@4600";
-+	};
- };
- 
- /*
---- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
-@@ -131,7 +131,24 @@
- 
- /include/ "pq3-i2c-0.dtsi"
- /include/ "pq3-i2c-1.dtsi"
--/include/ "pq3-duart-0.dtsi"
-+
-+	serial0: serial@4600 {
-+		cell-index = <1>;
-+		device_type = "serial";
-+		compatible = "fsl,ns16550", "ns16550";
-+		reg = <0x4600 0x100>;
-+		clock-frequency = <0>;
-+		interrupts = <42 2 0 0>;
-+	};
-+
-+	serial1: serial@4500 {
-+		cell-index = <0>;
-+		device_type = "serial";
-+		compatible = "fsl,ns16550", "ns16550";
-+		reg = <0x4500 0x100>;
-+		clock-frequency = <0>;
-+		interrupts = <42 2 0 0>;
-+	};
- 
- 	L2: l2-cache-controller@20000 {
- 		compatible = "fsl,mpc8548-l2-cache-controller";
diff --git a/target/linux/mpc85xx/patches-3.7/120-mpc8548_cds_i8259_noirq_init.patch b/target/linux/mpc85xx/patches-3.7/120-mpc8548_cds_i8259_noirq_init.patch
deleted file mode 100644
index 81b9193691..0000000000
--- a/target/linux/mpc85xx/patches-3.7/120-mpc8548_cds_i8259_noirq_init.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
-+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
-@@ -247,15 +247,16 @@ static int mpc85xx_cds_8259_attach(void)
- 		return -ENODEV;
- 	}
- 
-+	i8259_init(cascade_node, 0);
-+	of_node_put(cascade_node);
-+
- 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
- 	if (cascade_irq == NO_IRQ) {
--		printk(KERN_ERR "Failed to map cascade interrupt\n");
-+		of_node_put(cascade_node);
-+		printk(KERN_DEBUG "No interrupt for i8259 PIC\n");
- 		return -ENXIO;
- 	}
- 
--	i8259_init(cascade_node, 0);
--	of_node_put(cascade_node);
--
- 	/*
- 	 *  Hook the interrupt to make sure desc->action is never NULL.
- 	 *  This is required to ensure that the interrupt does not get
diff --git a/target/linux/mpc85xx/patches-3.7/130-mpc8548_cds_disable_i8259_irq.patch b/target/linux/mpc85xx/patches-3.7/130-mpc8548_cds_disable_i8259_irq.patch
deleted file mode 100644
index 9b2c7bbb65..0000000000
--- a/target/linux/mpc85xx/patches-3.7/130-mpc8548_cds_disable_i8259_irq.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/powerpc/boot/dts/mpc8548cds.dtsi
-+++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi
-@@ -293,8 +293,10 @@
- 				#address-cells = <0>;
- 				#interrupt-cells = <2>;
- 				compatible = "chrp,iic";
-+/*
- 				interrupts = <0 1 0 0>;
- 				interrupt-parent = <&mpic>;
-+*/
- 			};
- 
- 			rtc@70 {
diff --git a/target/linux/mpc85xx/patches-3.7/140-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-3.7/140-powerpc-85xx-tl-wdr4900-v1-support.patch
deleted file mode 100644
index 8e6d5ca46f..0000000000
--- a/target/linux/mpc85xx/patches-3.7/140-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ /dev/null
@@ -1,602 +0,0 @@
-From 406d86e5990ac171f18ef6e2973672d8fbfe1556 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/powerpc/boot/Makefile                  |    3 +
- arch/powerpc/boot/cuboot-tl-wdr4900-v1.c    |  164 ++++++++++++++++++++++++++
- arch/powerpc/boot/dts/tl-wdr4900-v1.dts     |  166 +++++++++++++++++++++++++++
- arch/powerpc/boot/wrapper                   |    4 +
- arch/powerpc/platforms/85xx/Kconfig         |   11 ++
- arch/powerpc/platforms/85xx/Makefile        |    1 +
- arch/powerpc/platforms/85xx/tl_wdr4900_v1.c |  145 +++++++++++++++++++++++
- 7 files changed, 494 insertions(+)
- create mode 100644 arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
- create mode 100644 arch/powerpc/boot/dts/tl-wdr4900-v1.dts
- create mode 100644 arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -98,6 +98,8 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot
- src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
- src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
- src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c
-+
- 
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -278,6 +280,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
-+image-$(CONFIG_TL_WDR4900_V1)		+= cuImage.tl-wdr4900-v1
- 
- # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
- image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
-@@ -0,0 +1,164 @@
-+/*
-+ * U-Boot compatibility wrapper for the TP-Link TL-WDR4900 v1 board
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *  cuboot-85xx.c
-+ *     Author: Scott Wood <scottwood@freescale.com>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ *  simpleboot.c
-+ *     Authors: Scott Wood <scottwood@freescale.com>
-+ *              Grant Likely <grant.likely@secretlab.ca>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *     Copyright (c) 2008 Secret Lab Technologies Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+static unsigned long bus_freq;
-+static unsigned long int_freq;
-+static u64 mem_size;
-+static unsigned char enetaddr[6];
-+
-+static void process_boot_dtb(void *boot_dtb)
-+{
-+	const u32 *na, *ns, *reg, *val32;
-+	const char *path;
-+	u64 memsize64;
-+	int node, size, i;
-+
-+	/* Make sure FDT blob is sane */
-+	if (fdt_check_header(boot_dtb) != 0)
-+		fatal("Invalid device tree blob\n");
-+
-+	/* Find the #address-cells and #size-cells properties */
-+	node = fdt_path_offset(boot_dtb, "/");
-+	if (node < 0)
-+		fatal("Cannot find root node\n");
-+	na = fdt_getprop(boot_dtb, node, "#address-cells", &size);
-+	if (!na || (size != 4))
-+		fatal("Cannot find #address-cells property");
-+
-+	ns = fdt_getprop(boot_dtb, node, "#size-cells", &size);
-+	if (!ns || (size != 4))
-+		fatal("Cannot find #size-cells property");
-+
-+	/* Find the memory range */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "memory", sizeof("memory"));
-+	if (node < 0)
-+		fatal("Cannot find memory node\n");
-+	reg = fdt_getprop(boot_dtb, node, "reg", &size);
-+	if (size < (*na+*ns) * sizeof(u32))
-+		fatal("cannot get memory range\n");
-+
-+	/* Only interested in memory based at 0 */
-+	for (i = 0; i < *na; i++)
-+		if (*reg++ != 0)
-+			fatal("Memory range is not based at address 0\n");
-+
-+	/* get the memsize and trucate it to under 4G on 32 bit machines */
-+	memsize64 = 0;
-+	for (i = 0; i < *ns; i++)
-+		memsize64 = (memsize64 << 32) | *reg++;
-+	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
-+		memsize64 = 0xffffffff;
-+
-+	mem_size = memsize64;
-+
-+	/* get clock frequencies */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "cpu", sizeof("cpu"));
-+	if (!node)
-+		fatal("Cannot find cpu node\n");
-+
-+	val32 = fdt_getprop(boot_dtb, node, "clock-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get clock frequency");
-+
-+	int_freq = *val32;
-+
-+	val32 = fdt_getprop(boot_dtb, node, "bus-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get bus frequency");
-+
-+	bus_freq = *val32;
-+
-+	path = fdt_get_alias(boot_dtb, "ethernet0");
-+	if (path) {
-+		const void *p;
-+
-+		node = fdt_path_offset(boot_dtb, path);
-+		if (node < 0)
-+			fatal("Cannot find ethernet0 node");
-+
-+		p = fdt_getprop(boot_dtb, node, "mac-address", &size);
-+		if (!p || (size < 6)) {
-+			printf("no mac-address property, finding local\n\r");
-+			p = fdt_getprop(boot_dtb, node, "local-mac-address", &size);
-+		}
-+
-+		if (!p || (size < 6))
-+			fatal("cannot get MAC addres");
-+
-+		memcpy(enetaddr, p, sizeof(enetaddr));
-+	}
-+}
-+
-+static void platform_fixups(void)
-+{
-+	void *soc;
-+
-+	dt_fixup_memory(0, mem_size);
-+
-+	dt_fixup_mac_address_by_alias("ethernet0", enetaddr);
-+	dt_fixup_cpu_clocks(int_freq, bus_freq / 8, bus_freq);
-+
-+	/* Unfortunately, the specific model number is encoded in the
-+	 * soc node name in existing dts files -- once that is fixed,
-+	 * this can do a simple path lookup.
-+	 */
-+	soc = find_node_by_devtype(NULL, "soc");
-+	if (soc) {
-+		void *serial = NULL;
-+
-+		setprop(soc, "bus-frequency", &bus_freq, sizeof(bus_freq));
-+
-+		while ((serial = find_node_by_devtype(serial, "serial"))) {
-+			if (get_parent(serial) != soc)
-+				continue;
-+
-+			setprop(serial, "clock-frequency", &bus_freq,
-+				sizeof(bus_freq));
-+		}
-+	}
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+                   unsigned long r6, unsigned long r7)
-+{
-+	mem_size = 64 * 1024 * 1024;
-+
-+	simple_alloc_init(_end, mem_size - (u32)_end - 1024*1024, 32, 64);
-+
-+	fdt_init(_dtb_start);
-+	serial_console_init();
-+
-+	printf("\n\r-- TL-WDR4900 v1 boot wrapper --\n\r");
-+
-+	process_boot_dtb((void *) r3);
-+
-+	platform_ops.fixups = platform_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
-@@ -0,0 +1,198 @@
-+/*
-+ * TP-Link TL-WDR4900 v1 Device Tree Source
-+ *
-+ * Copyright 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+/include/ "fsl/p1010si-pre.dtsi"
-+
-+/ {
-+	model = "TP-Link TL-WDR4900 v1";
-+	compatible = "tp-link,TL-WDR4900v1";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+/*
-+		linux,stdout-path = "/soc@ffe00000/serial@4500";
-+*/
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+	};
-+
-+	soc: soc@ffe00000 {
-+		ranges = <0x0 0x0 0xffe00000 0x100000>;
-+
-+		spi0: spi@7000 {
-+			flash@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "spansion,s25fl129p1";
-+				reg = <0>;
-+				spi-max-frequency = <25000000>;
-+
-+				u-boot@0 {
-+					reg = <0x0 0x0050000>;
-+					label = "u-boot";
-+					read-only;
-+				};
-+
-+				dtb@50000 {
-+					reg = <0x00050000 0x00010000>;
-+					label = "dtb";
-+					read-only;
-+				};
-+
-+				kernel@60000 {
-+					reg = <0x00060000 0x002a0000>;
-+					label = "kernel";
-+				};
-+
-+				rootfs@300000 {
-+					reg = <0x00300000 0x00ce0000>;
-+					label = "rootfs";
-+				};
-+
-+				config@fe0000 {
-+					reg = <0x00fe0000 0x00010000>;
-+					label = "config";
-+					read-only;
-+				};
-+
-+				caldata@ff0000 {
-+					reg = <0x00ff0000 0x00010000>;
-+					label = "caldata";
-+					read-only;
-+				};
-+
-+				firmware@60000 {
-+					reg = <0x00060000 0x00f80000>;
-+					label = "firmware";
-+				};
-+			};
-+		};
-+
-+		gpio0: gpio-controller@f000 {
-+		};
-+
-+		usb@22000 {
-+			phy_type = "utmi";
-+			dr_mode = "host";
-+		};
-+
-+		mdio@24000 {
-+			phy0: ethernet-phy@0 {
-+				/* interrupts = <3 1 0 0>; */
-+				reg = <0x0>;
-+			};
-+		};
-+
-+		mdio@25000 {
-+			status = "disabled";
-+		};
-+
-+		mdio@26000 {
-+			status = "disabled";
-+		};
-+
-+		enet0: ethernet@b0000 {
-+			phy-handle = <&phy0>;
-+			phy-connection-type = "rgmii-id";
-+		};
-+
-+		enet1: ethernet@b1000 {
-+			status = "disabled";
-+		};
-+
-+		enet2: ethernet@b2000 {
-+			status = "disabled";
-+		};
-+
-+		sdhc@2e000 {
-+			status = "disabled";
-+		};
-+
-+		serial1: serial@4600 {
-+			status = "disabled";
-+		};
-+
-+		can0: can@1c000 {
-+			status = "disabled";
-+		};
-+
-+		can1: can@1d000 {
-+			status = "disabled";
-+		};
-+	};
-+
-+	pci0: pcie@ffe09000 {
-+		reg = <0 0xffe09000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0xa0000000
-+				  0x2000000 0x0 0xa0000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	pci1: pcie@ffe0a000 {
-+		reg = <0 0xffe0a000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0x80000000
-+				  0x2000000 0x0 0x80000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	ifc: ifc@ffe1e000 {
-+		status = "disabled";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		system {
-+			gpios = <&gpio0 2 1>; /* active low */
-+			label = "tp-link:blue:system";
-+		};
-+
-+		usb1 {
-+			gpios = <&gpio0 3 1>; /* active low */
-+			label = "tp-link:green:usb1";
-+		};
-+
-+		usb2 {
-+			gpios = <&gpio0 4 1>; /* active low */
-+			label = "tp-link:green:usb2";
-+		};
-+	};
-+
-+	buttons {
-+		compatible = "gpio-keys";
-+
-+		reset {
-+			label = "Reset button";
-+			gpios = <&gpio0 5 1>; /* active low */
-+			linux,code = <0x198>; /* KEY_RESTART */
-+		};
-+	};
-+};
-+
-+/include/ "fsl/p1010si-post.dtsi"
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -197,6 +197,10 @@ cuboot*)
-     *-mpc85*|*-tqm85*|*-sbc85*)
-         platformo=$object/cuboot-85xx.o
-         ;;
-+    *-tl-wdr4900-v1)
-+        platformo=$object/cuboot-tl-wdr4900-v1.o
-+	link_address='0x1000000'
-+        ;;
-     *-amigaone)
-         link_address='0x800000'
-         ;;
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -147,6 +147,17 @@ config STX_GP3
- 	select CPM2
- 	select DEFAULT_UIMAGE
- 
-+config TL_WDR4900_V1
-+	bool "TP-Link TL-WDR4900 v1"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+	  This board is a Concurrent Dual-Band wireless router with a
-+	  Freescale P1014 SoC.
-+
- config TQM8540
- 	bool "TQ Components TQM8540"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P5020_DS)    += p5020_ds.o
- obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548)     += sbc8548.o
- obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
- obj-$(CONFIG_KSI8560)	  += ksi8560.o
---- /dev/null
-+++ b/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
-@@ -0,0 +1,145 @@
-+/*
-+ * TL-WDR4900 v1 board setup
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *   p1010rdb.c:
-+ *      P1010RDB Board Setup
-+ *      Copyright 2011 Freescale Semiconductor Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/leds.h>
-+
-+#include <asm/time.h>
-+#include <asm/machdep.h>
-+#include <asm/pci-bridge.h>
-+#include <mm/mmu_decl.h>
-+#include <asm/prom.h>
-+#include <asm/udbg.h>
-+#include <asm/mpic.h>
-+
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+
-+#include "mpc85xx.h"
-+
-+void __init tl_wdr4900_v1_pic_init(void)
-+{
-+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
-+	  MPIC_SINGLE_DEST_CPU,
-+	  0, 256, " OpenPIC  ");
-+
-+	BUG_ON(mpic == NULL);
-+
-+	mpic_init(mpic);
-+}
-+
-+#ifdef CONFIG_PCI
-+static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = {
-+	{
-+		.name		= "tp-link:blue:wps",
-+		.gpio		= 1,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac0.eeprom",
-+	.leds = tl_wdr4900_v1_wmac_leds_gpio,
-+	.num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio),
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac1.eeprom",
-+};
-+
-+static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev)
-+{
-+	if (!machine_is(tl_wdr4900_v1))
-+		return;
-+
-+	if (dev->bus->number == 1 &&
-+	    PCI_SLOT(dev->devfn) == 0) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data;
-+		return;
-+	}
-+
-+	if (dev->bus->number == 3 &&
-+	    PCI_SLOT(dev->devfn) == 0 &&
-+	    dev->device == 0xabcd) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data;
-+
-+		/*
-+		 * The PCI header of the AR9381 chip is not programmed
-+		 * correctly by the bootloader and the device uses wrong
-+		 * data due to that. Replace the broken values with the
-+		 * correct ones.
-+		 */
-+		dev->device = 0x30;
-+		dev->class = 0x028000;
-+
-+		pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev));
-+	}
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
-+			tl_wdr4900_v1_pci_wmac_fixup);
-+#endif /* CONFIG_PCI */
-+
-+/*
-+ * Setup the architecture
-+ */
-+static void __init tl_wdr4900_v1_setup_arch(void)
-+{
-+	if (ppc_md.progress)
-+		ppc_md.progress("tl_wdr4900_v1_setup_arch()", 0);
-+
-+	fsl_pci_assign_primary();
-+
-+	printk(KERN_INFO "TL-WDR4900 v1 board from TP-Link\n");
-+}
-+
-+machine_arch_initcall(tl_wdr4900_v1, mpc85xx_common_publish_devices);
-+machine_arch_initcall(tl_wdr4900_v1, swiotlb_setup_bus_notifier);
-+
-+/*
-+ * Called very early, device-tree isn't unflattened
-+ */
-+static int __init tl_wdr4900_v1_probe(void)
-+{
-+	unsigned long root = of_get_flat_dt_root();
-+
-+	if (of_flat_dt_is_compatible(root, "tp-link,TL-WDR4900v1"))
-+		return 1;
-+
-+	return 0;
-+}
-+
-+define_machine(tl_wdr4900_v1) {
-+	.name			= "Freescale P1014",
-+	.probe			= tl_wdr4900_v1_probe,
-+	.setup_arch		= tl_wdr4900_v1_setup_arch,
-+	.init_IRQ		= tl_wdr4900_v1_pic_init,
-+#ifdef CONFIG_PCI
-+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-+#endif
-+	.get_irq		= mpic_get_irq,
-+	.restart		= fsl_rstcr_restart,
-+	.calibrate_decr		= generic_calibrate_decr,
-+	.progress		= udbg_progress,
-+};