mpc83xx: add support for 3.6

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34889 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 279 insertions, 0 deletions

diff --git a/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch b/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch
new file mode 100644
index 0000000000..f67aa7b013
--- /dev/null
+++ b/target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch
@@ -0,0 +1,279 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -497,6 +497,13 @@ config MTD_NAND_PLATFORM
+ 	  devices. You will need to provide platform-specific functions
+ 	  via platform_data.
+ 
++config MTD_NAND_RB_PPC
++	tristate "MikroTik RB333/600 NAND support"
++	depends on RB_PPC
++	help
++	  This option enables support for the NAND device on MikroTik
++	  RouterBOARD 333/600 series boards.
++
+ config MTD_ALAUDA
+ 	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
+ 	depends on USB
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB_PPC)		+= rbppc_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+--- /dev/null
++++ b/drivers/mtd/nand/rbppc_nand.c
+@@ -0,0 +1,250 @@
++/*
++ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
++ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
++ * Copyright (C) Mikrotik 2007
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/of_platform.h>
++#include <linux/of_device.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++#define DRV_NAME	"rbppc_nand"
++#define DRV_VERSION	"0.0.2"
++
++static struct mtd_info rmtd;
++static struct nand_chip rnand;
++
++struct rbppc_nand_info {
++	void *gpi;
++	void *gpo;
++	void *localbus;
++
++	unsigned gpio_rdy;
++	unsigned gpio_nce;
++	unsigned gpio_cle;
++	unsigned gpio_ale;
++	unsigned gpio_ctrls;
++};
++
++/* We must use the OOB layout from yaffs 1 if we want this to be recognized
++ * properly. Borrowed from the OpenWRT patches for the RB532.
++ *
++ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
++ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
++ */
++static struct nand_ecclayout rbppc_nand_oob_16 = {
++	.eccbytes = 6,
++	.eccpos = { 8, 9, 10, 13, 14, 15 },
++	.oobavail = 9,
++	.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rbppc_nand_partition_info[] = {
++	{
++		name: "kernel",
++		offset: 0,
++		size: 4 * 1024 * 1024,
++	},
++	{
++		name: "rootfs",
++		offset: MTDPART_OFS_NXTBLK,
++		size: MTDPART_SIZ_FULL,
++	},
++};
++
++static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
++	struct nand_chip *chip = mtd->priv;
++	struct rbppc_nand_info *priv = chip->priv;
++
++	return in_be32(priv->gpi) & priv->gpio_rdy;
++}
++
++static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
++	struct nand_chip *chip = mtd->priv;
++	struct rbppc_nand_info *priv = chip->priv;
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		unsigned val = in_be32(priv->gpo);
++		if (!(val & priv->gpio_nce)) {
++			/* make sure Local Bus has done NAND operations */
++			readb(priv->localbus);
++		}
++
++		if (ctrl & NAND_CLE) {
++			val |= priv->gpio_cle;
++		} else {
++			val &= ~priv->gpio_cle;
++		}
++		if (ctrl & NAND_ALE) {
++			val |= priv->gpio_ale;
++		} else {
++			val &= ~priv->gpio_ale;
++		}
++		if (!(ctrl & NAND_NCE)) {
++			val |= priv->gpio_nce;
++		} else {
++			val &= ~priv->gpio_nce;
++		}
++		out_be32(priv->gpo, val);
++
++		/* make sure GPIO output has changed */
++		val ^= in_be32(priv->gpo);
++		if (val & priv->gpio_ctrls) {
++			printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
++		}
++	}
++
++	if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
++}
++
++static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
++{
++	struct nand_chip *chip = mtd->priv;
++	memcpy(buf, chip->IO_ADDR_R, len);
++}
++
++static unsigned init_ok = 0;
++
++static int __devinit rbppc_nand_probe(struct platform_device *pdev)
++{
++	struct device_node *gpio;
++	struct device_node *nnand;
++	struct resource res;
++	struct rbppc_nand_info *info;
++	void *baddr;
++	const unsigned *rdy, *nce, *cle, *ale;
++
++	printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
++
++	info = kmalloc(sizeof(*info), GFP_KERNEL);
++
++	rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
++	nce = of_get_property(pdev->dev.of_node, "nce", NULL);
++	cle = of_get_property(pdev->dev.of_node, "cle", NULL);
++	ale = of_get_property(pdev->dev.of_node, "ale", NULL);
++
++	if (!rdy || !nce || !cle || !ale) {
++		printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
++		goto err;
++	}
++	if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
++		printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
++		goto err;
++	}
++
++	gpio = of_find_node_by_phandle(rdy[0]);
++	if (!gpio) {
++		printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
++		goto err;
++	}
++	if (of_address_to_resource(gpio, 0, &res)) {
++		printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
++		goto err;
++	}
++	info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
++
++	if (!of_address_to_resource(gpio, 1, &res)) {
++		info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
++	} else {
++		info->gpi = info->gpo;
++	}
++	of_node_put(gpio);
++
++	info->gpio_rdy = 1 << (31 - rdy[1]);
++	info->gpio_nce = 1 << (31 - nce[1]);
++	info->gpio_cle = 1 << (31 - cle[1]);
++	info->gpio_ale = 1 << (31 - ale[1]);
++	info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
++
++	nnand = of_find_node_by_name(NULL, "nnand");
++	if (!nnand) {
++		printk("rbppc_nand_probe: No nNAND found\n");
++		goto err;
++	}
++	if (of_address_to_resource(nnand, 0, &res)) {
++		printk("rbppc_nand_probe: No reg property in nNAND found\n");
++		goto err;
++	}
++	of_node_put(nnand);
++	info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
++
++	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
++	    printk("rbppc_nand_probe: No reg property found\n");
++	    goto err;
++	}
++	baddr = ioremap_nocache(res.start, res.end - res.start + 1);
++
++	memset(&rnand, 0, sizeof(rnand));
++	rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
++	rnand.dev_ready = rbppc_nand_dev_ready;
++	rnand.read_buf = rbppc_nand_read_buf;
++	rnand.IO_ADDR_W = baddr;
++	rnand.IO_ADDR_R = baddr;
++	rnand.priv = info;
++
++	memset(&rmtd, 0, sizeof(rmtd));
++	rnand.ecc.mode = NAND_ECC_SOFT;
++	rnand.ecc.layout = &rbppc_nand_oob_16;
++	rnand.chip_delay = 25;
++	rmtd.priv = &rnand;
++	rmtd.owner = THIS_MODULE;
++
++	if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
++		printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
++		return -ENXIO;
++	}
++
++	mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
++	init_ok = 1;
++	return 0;
++
++err:
++	kfree(info);
++	return -1;
++}
++
++static struct of_device_id rbppc_nand_ids[] = {
++	{ .name = "nand", },
++	{ },
++};
++
++static struct platform_driver rbppc_nand_driver = {
++	.probe	= rbppc_nand_probe,
++	.driver	= {
++		.name = "rbppc-nand",
++		.owner = THIS_MODULE,
++		.of_match_table = rbppc_nand_ids,
++	},
++};
++
++static int __init rbppc_nand_init(void)
++{
++	return platform_driver_register(&rbppc_nand_driver);
++}
++
++static void __exit rbppc_nand_exit(void)
++{
++	platform_driver_unregister(&rbppc_nand_driver);
++}
++
++MODULE_AUTHOR("Mikrotikls SIA");
++MODULE_AUTHOR("Noah Fontes");
++MODULE_AUTHOR("Michael Guntsche");
++MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
++module_init(rbppc_nand_init);
++module_exit(rbppc_nand_exit);